Professional Documents
Culture Documents
Wireless network is a network set up by using radio signal frequency to communicate among computers
and other network devices. Sometimes it’s also referred to as WiFi network or WLAN. This network is
getting popular nowadays due to easy to setup feature and no cabling involved. You can connect computers
anywhere in your home without the need for wires.
Here is simple explanation of how it works, let say you have 2 computers each equipped with wireless
adapter and you have set up wireless router. When the computer send out the data, the binary data will be
encoded to radio frequency and transmitted via wireless router. The receiving computer will then decode the
signal back to binary data.
It doesn’t matter you are using broadband cable/DSL modem to access internet, both ways will work with
wireless network. If you heard about wireless hotspot, that means that location is equipped with wireless
devices for you and others to join the network.
If you have not set up any wired network, then just get a wireless router and attach it to cable or DSL
modem. You then set up wireless client by adding wireless card to each computer and form a simple
wireless network. You can also cable connect computer directly to router if there are switch ports available.
If you already have wired Ethernet network at home, you can attach a wireless access point to existing
network router and have wireless access at home.
Wireless router or access points should be installed in a way that maximizes coverage as well as throughput.
The coverage provided is generally referred to as the coverage cell. Large areas usually require more than
one access point in order to have adequate coverage. You can also add access point to your existing wireless
router to improve coverage.
The IEEE 802.11 standards specify two operating modes: infrastructure mode and ad hoc mode.
Infrastructure mode is used to connect computers with wireless network adapters, also known as wireless
clients, to an existing wired network with the help from wireless router or access point. The 2 examples
which I specified above operate in this mode.
Ad hoc mode is used to connect wireless clients directly together, without the need for a wireless router or
access point. An ad hoc network consists of up to 9 wireless clients, which send their data directly to each
other. Click here to learn more on this ad hoc mode.
I'm going to show you tips that can be used to secure your computer or network properly, so that to
minimize the attacks from hacker, virus, worm or malware. Take some time to explore, feel free to come
back to explore more, more articles will be added.
I'm going to show you tips that can be used to secure your computer or network properly, so that to
minimize the attacks from hacker, virus, worm or malware. Take some time to explore, feel free to come
back to explore more, more articles will be added.
netsh winsock reset - Resetting Winsock Catalog and Solving Network Problem
netsh winsock reset is useful command that you can use in Microsoft Windows to reset winsock catalog back
to default setting or clean state. You can try this if you are having following Internet access or networking
problems.
Quick Tip to use Remote Assistance via Live Messenger to Get Help
Here I will show you a quick way to use Remote Assistance via Live Messenger to get help from your good
friend that you used to chat with, so that he/she can remotely view and control your computer and show
you how to solve your computer problem.
What is My IP Address
What is my IP address? I was asked this question many times. Based on my understanding, sometimes they
refer to the IP address configured on the computer, or the Internet public IP address (WAN IP) of the
Cable/DSL connection. In either case, it’s pretty to check it on Microsoft Windows.
Changing the Speed and Duplex Mode of Network Card in Microsoft Windows
Sometimes you might want to check or change the speed and duplex mode of network card in order to
troubleshoot the home network access problem, such as slow Internet connection or no connectivity
problem.
netsh winsock reset - Resetting Winsock Catalog and Solving Network Problem
netsh winsock reset is useful command that you can use in Microsoft Windows to reset winsock catalog back
to default setting or clean state. You can try this if you are having following Internet access or networking
problems.
Quick Tip to use Remote Assistance via Live Messenger to Get Help
Here I will show you a quick way to use Remote Assistance via Live Messenger to get help from your good
friend that you used to chat with, so that he/she can remotely view and control your computer and show
you how to solve your computer problem.
What is My IP Address
What is my IP address? I was asked this question many times. Based on my understanding, sometimes they
refer to the IP address configured on the computer, or the Internet public IP address (WAN IP) of the
Cable/DSL connection. In either case, it’s pretty to check it on Microsoft Windows.
Changing the Speed and Duplex Mode of Network Card in Microsoft Windows
Sometimes you might want to check or change the speed and duplex mode of network card in order to
troubleshoot the home network access problem, such as slow Internet connection or no connectivity
problem.
In order to make it works, you will need a Windows 10 , 7 , Vista or XP computer set up with 2 network cards
with one connects to Internet and the other one connects to home network. This computer can be enabled
with ICS feature and is called ICS host computer.
ICS host computer will act as a router to route the traffic from other computers to Internet, also means
other computers at home can point to this computer as gateway in order to go to Internet. The ICS host
computer must be turned on whenever other computers need to access Internet.
Here is typical home network that client computers access Internet through ICS host computer.
Networking Books
Although this website talks about home network, wireless network, network security and other networking
information and how-to, but it’s not possible to cover all aspects of networking knowledge.
So, if you are interested to learn more and detailed networking knowledge, I recommend you to take a look
on following networking books, check the book details and read the editorial/user reviews to know more
about the book you like.
This Networking All-in-One is full of the information you’ll need to set up a network and keep it functioning
whether you're in charge of a small network or a large network. It's fully updated to capture the latest
Windows 10 releases through Spring 2018, this is the comprehensive guide to setting up, managing, and
securing a successful network.
Inside, you will find nine minibooks cover essential, up-to-date information for networking in systems such
as Windows 10 and Linux, as well as best practices for security, mobile and cloud-based networking, and
much more.
This Networking All-in-One For Dummies is the perfect beginner’s guide as well as the professional’s ideal
reference book. Overall it serves as a single source for the most-often needed network administration
information covers the latest trends in networking.
This book will teach you how you can protect yourself from most common hacking attacks -- by knowing
how hacking actually works! After all, in order to prevent your system from being compromised, you need to
stay a step ahead of any criminal hacker. You can do that by learning how to hack and how to do a counter-
hack.
Within this book are techniques and tools that are used by both criminal and ethical hackers – all the things
that you will find here will show you how information security can be compromised and how you can identify
an attack in a system that you are trying to protect. At the same time, you will also learn how you can
minimise any damage in your system or stop an ongoing attack.
Introduction to Networking
By: Dr. Charles R Severance and Sue Blumenberg
Published on: May 2015
This book demystifies the amazing architecture and protocols of computers as they communicate over the
Internet. While very complex, the Internet operates on a few relatively simple concepts that anyone can
understand. Networks and networked applications are embedded in our lives. Understanding how these
technologies work is invaluable. This book was written for everyone - no technical knowledge is required!
While this book is not specifically about the Network+ or CCNA certifications, it as a way to give students
interested in these certifications a starting point.
In this book, “Hacking: The Ultimate Beginner-to-Expert Guide To Penetration Testing, Hacking, And
Security Countermeasures,” you will learn: the different types of hackers, the different types of attacks, the
proven steps and techniques that the best hackers use Penetration testing, hacking Wi-Fi, hacking
Smartphones, hacking computers, the countermeasures you need to protect yourself from hackers, the
future of hacking and much, much more!
This book goes all the way from the basic principles to the intricate techniques and methods that you can
use to hack. It is written to suit both beginners, as well as hacking experts. The book uses a language that
beginners can understand, without leaving out the complex details that are necessary with hacking.
This book is a great place to start learning how to hack and how to protect your devices. If you have been
waiting for a book that can break it down for you and then dive into the deep end seamlessly, grab a copy of
this book today!
CCENT/CCNA ICND1 100-105 Official Cert Guide
By: Wendell Odom
Published on: May 2016
If you are looking for a guide to help you passing the CCNA certification, then you need to get this one! This
is a good one! I got my CCNA recertified with this book as well. Trust the best-selling Official Cert Guide
series from Cisco Press to help you learn, prepare, and practice for exam success. They are built with the
objective of providing assessment, review, and practice to help ensure you are fully prepared for your
certification exam.
If you like networking stuffs and wish to work in networking field, then you can start by getting certified in
CCNA. Let's act now, grab this book and start to learn about Cisco networking.
This book will motivate you with a top-down, layered approach to computer networking.
Unique among computer networking texts, the Seventh Edition of the popular Computer Networking: A Top
Down Approach builds on the author’s long tradition of teaching this complex subject through a layered
approach in a “top-down manner.” The text works its way from the application layer down toward the
physical layer, motivating readers by exposing them to important concepts early in their study of
networking. Focusing on the Internet and the fundamentally important issues of networking, this text
provides an excellent foundation for readers interested in computer science and electrical engineering,
without requiring extensive knowledge of programming or mathematics. The Seventh Edition has been
updated to reflect the most important and exciting recent advances in networking.
The cable can be categorized as Cat 5, Cat 5e, Cat 6 UTP cable. Cat 5 UTP cable can support 10/100 Mbps
Ethernet network, whereas Cat 5e and Cat 6 UTP cable can support Ethernet network running at
10/100/1000 Mbps. You might heard about Cat 3 UTP cable, it's not popular anymore since it can only
support 10 Mbps Ethernet network.
Straight and crossover cable can be Cat3, Cat 5, Cat 5e or Cat 6 UTP cable, the only difference is each type
will have different wire arrangement in the cable for serving different purposes.
Straight Cable
You usually use straight cable to connect different type of devices. This type of cable will be used most of
the time and can be used to:
If you need to check how straight cable looks like, it's easy. Both side (side A and side B) of cable have
wire arrangement with same color. Check out different types of straight cable that are available in the
market here.
Crossover Cable
Sometimes you will use crossover cable, it's usually used to connect same type of devices. A crossover cable
can be used to:
In you need to check how crossover cable looks like, both side (side A and side B) of cable have wire
arrangement with following different color . Have a look on these crossover cables if you plan to buy
one. You can also find more network cable choices and information from Comtrad Cables.
In case you need to make a crossover cable yourself! You can use this crimper to do it.
Lastly, if you still not sure which type of cable to be used sometimes, try both cables and see which
works.
Note: If there is auto MDI/MDI-X feature support on the switch, hub, network card or other network
devices, you don't have to use crossover cable in the situation which I mentioned above. This is because
crossover function would be enabled automatically when it's needed.