Professional Documents
Culture Documents
DM SERIES
DM 0217
Practice-oriented, scalable and thought out in detail: The new drum motor DM 0217
makes it easy to build a completely individual conveyor system and is dimensioned for
the higher requirements of permissible belt tension now demanded from industry and
belt manufacturers alike.
With a broader speed spectrum, the DM 0217 covers all possible applications. The
clever plug-and-play connection significantly simplifies the installation. Each motor is
approved, tested, and modularized so that it can be produced and delivered around
the world in the shortest amount of time.
The modular design of the DM 0217 allows a free combination of individual module
groups, such as shaft, end housing, shell or steel gear, to perfectly meet the
requirements of an application. In addition, various options, such as encoder, brake,
backstop, rubber laggings, etc., as well as different accessories are available.
With the platform concept of the DM 0217, it is possible to cover all internal logistics
applications in the food processing sector, as well as in industry, distribution and
airports.
© 06 | 2020 Interroll
94
DRUM MOTOR
DM SERIES
DM 0217
Technical data
DL series
Asynchronous squirrel cage motor
Frequency 50 Hz
Operating mode S1
DM series
Ambient temperature, 3-phase motor +2 to +40 °C
Low temperature ranges on request.
DP series
Sprockets Sprockets only on request
Options Backstop
Electromagnetic holding brake and rectifier*
Encoder*
Balancing
Plug connection (up to max. 1100 W)
© 06 | 2020 Interroll
95
DRUM MOTOR
DM SERIES
DM 0217
Material variants
The following components can be selected for the drum motor and the electrical connection. The combination of components depends
on the material used.
Shell Crowned l l
Cylindrical l l
Cylindrical + key l l
End housing Standard l l
Shaft Standard l
Cross-drilled thread l
Gear boxes Spur gear box l
Electrical connector Straight connector l l l
Straight hygienic connector l
Elbow connector l l
Terminal box l l l
90° hygienic connector l
Motor winding Asynchronous motor
Motor variants
Mechanical data for 3-phase asynchronous motor
PN nP gs i v nA MA FN FWMIN SLMIN
[W] [m/s] [min-1] [Nm] [N] [mm] [mm]
© 06 | 2020 Interroll
96
DRUM MOTOR
DM SERIES
DM 0217
PN nP gs i v nA MA FN FWMIN SLMIN
[W] [m/s] [min-1] [Nm] [N] [mm] [mm]
DL series
1100 8 2 31.11 0.254 22.3 451.8 4154 410 500
DM series
1100 2 2 19.64 1.650 144.9 69.6 640 410 400
DP series
2200 4 2 27.53 0.587 51.6 391.4 3599 510 500
© 06 | 2020 Interroll
97
DRUM MOTOR
DM SERIES
DM 0217
PN nP gs i v nA MA FN FWMIN SLMIN
[W] [m/s] [min-1] [Nm] [N] [mm] [mm]
3,000 4 2 27.53 0.587 51.6 533.6 4907 510 500
Mechanical data for 3-phase asynchronous motor (form-fit belts or without belt)
PN nP gs i v nA MA FN FWMIN SLMIN
[W] [m/s] [min-1] [Nm] [N] [mm] [mm]
© 06 | 2020 Interroll
98
DRUM MOTOR
DM SERIES
DM 0217
DL series
PN nP nN fN UN IN cosφ η JR IS/IN M S/ M B/ M P/ MN RM USHΔ USHY
[W] [min-1] [Hz] [V] [A] [%] [kgcm2] MN MN MN [Nm] [Ω] [V] [V]
370 8 690 50 400 1.50 0.62 0.57 22.6 2.87 1.90 2.35 1.90 5.12 22.0 31
370 8 690 50 230 2.42 0.62 0.57 22.6 2.87 1.90 2.35 1.90 5.12 22.0 17
550 6 845 50 400 1.60 0.69 0.72 22.6 3.4 1.40 1.65 1.40 6.22 19.5 32
550 6 845 50 230 2.77 0.69 0.72 22.6 3.4 1.40 1.65 1.40 6.22 19.5 19
750 4 1355 50 400 1.80 0.80 0.75 11.3 3.5 1.53 1.80 1.30 5.29 23.9 52
750 4 1355 50 230 3.12 0.80 0.75 11.3 3.5 1.53 1.80 1.30 5.29 23.9 30
1100 2 2845 50 400 2.40 0.86 0.77 7.6 5.2 3.15 3.42 2.10 3.69 2.9 9
1100 2 2845 50 230 4.16 0.86 0.77 7.6 5.2 3.15 3.42 2.10 3.69 2.9 5
DM series
1100 4 1320 50 400 2.80 0.82 0.69 11.3 3.5 1.50 1.70 1.30 7.96 7.2 25
1100 4 1320 50 230 4.85 0.82 0.69 11.3 3.5 1.50 1.70 1.30 7.96 7.2 14
1100 8 695 50 400 3.20 0.81 0.61 86.0 4.5 1.80 2.20 1.70 15.12 6.3 24
1100 8 695 50 230 5.54 0.81 0.61 86.0 4.5 1.80 2.20 1.70 15.12 6.3 14
1500 6 960 50 400 4.00 0.82 0.66 86.0 4.8 2.10 2.50 1.90 14.92 4.3 21
1500 6 960 50 230 6.93 0.82 0.66 86.0 4.8 2.10 2.50 1.90 14.92 4.3 12
1500 4 1410 50 400 3.70 0.87 0.67 49.6 5.5 2.20 2.50 1.80 10.16 3.6 17
1500 4 1410 50 230 6.41 0.87 0.67 49.6 5.5 2.20 2.50 1.80 10.16 3.6 10
2200 4 1420 50 400 5.20 0.87 0.70 60.0 5.9 2.40 2.90 2.30 14.80 3.55 24
DP series
2200 4 1420 50 230 9.01 0.87 0.70 60.0 5.9 2.40 2.90 2.30 14.80 3.55 14
2200 2 2794 50 400 5.10 0.88 0.71 26.0 6.4 2.60 3.02 2.30 7.52 2.95 20
2200 2 2794 50 230 8.83 0.88 0.71 26.0 6.4 2.60 3.02 2.30 7.52 2.95 11
3,000 4 1420 50 400 7.00 0.82 0.76 46.9 5.0 2.40 2.90 2.30 20.19 1.85 16
3,000 4 1420 50 230 12.12 0.82 0.76 46.9 5.0 2.40 2.90 2.30 20.19 1.85 9
3,000 2 2812 50 400 6.65 0.82 0.80 37.1 6.5 2.60 3.40 2.40 10.19 1.55 13
3,000 2 2812 50 230 11.52 0.82 0.80 37.1 6.5 2.60 3.40 2.40 10.19 1.55 7
© 06 | 2020 Interroll
99
DRUM MOTOR
DM SERIES
DM 0217
Electrical data for 3-phase asynchronous motor (form-fit belts or without belt)
306 8 230 1.97 0.62 0.62 22.6 2.9 1.24 1.40 1.16 28.0 17
306 8 400 1.15 0.62 0.62 22.6 2.9 1.24 1.40 1.16 28.0 30
455 6 230 2.04 0.75 0.74 22.6 3.1 1.07 1.07 1.07 25.0 19
455 6 400 1.18 0.75 0.74 22.6 3.1 1.07 1.07 1.07 25.0 33
620 4 230 2.55 0.80 0.76 11.3 3.6 1.26 1.49 1.07 14.4 15
620 4 400 1.48 0.80 0.76 11.3 3.6 1.26 1.49 1.07 14.4 26
909 4 230 3.92 0.84 0.69 11.3 3.7 1.16 1.24 1.07 8.3 14
909 4 400 2.27 0.84 0.69 11.3 3.7 1.16 1.24 1.07 8.3 24
909 2 230 3.30 0.86 0.80 7.3 4.6 2.48 2.64 1.74 6.2 9
909 2 400 1.91 0.86 0.80 7.3 4.6 2.48 2.64 1.74 6.2 15
© 06 | 2020 Interroll
100
DRUM MOTOR
DM SERIES
DM 0217
DL series
29000
26500
24000
21500
TE [N]
19000
16500
14000
DM series
11500
9000
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
nA [min-1]
Note: The correct value for the maximum permissible belt tension is determined from the maximum permissible TE value for the rpm of
the drum motor. The TE value for the shell length does not have to be taken into account for the standard motor DM 0217. The belt
tension diagrams apply only to standard shafts.
TE = Belt tension
nA = Shell rated speed
FW = Drum width
DP series
Application Notes
© 06 | 2020 Interroll
101
DRUM MOTOR
DM SERIES
DM 0217
Dimensions
Drum motor
AGL
C EL C
H H
A-A
F
A
øA
øB
D
P SL=FW-2xP P
FW
Type A B C D F H P SL EL AGL
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
DM 0217 crowned 217.5 215.5 45 40 30 21.5 5 FW − 10 FW + 33 FW + 123
© 06 | 2020 Interroll
102