Professional Documents
Culture Documents
50--1--2040--315A_en 1/41
4
1
(3) 5 4
7
3 5
2
27 28 29 30 4 6
3
2
135
26
20 16
18 8
19
15
14
12
24
25
Z 56 107
2/41 50--1--2040--315A_en
Driver’s Cab 4
4 Driver’s Cab
4.1 Operator’s Platform
(Z 56 107)
No. Designation Function
1 Combination switch see sect. 4.1.8, page 19
on the left of the
steering column
2 Steering wheel
3 Combination switch see sect. 4.1.9, page 21
on the right of the
steering column
4 Radio
5 Pressure gauge Pressure display suspension circuit I
Axles 1, left and right
6 Pressure gauge Pressure display suspension circuit II
Axles 2 and 3, left
7 Pressure gauge Pressure display suspension circuit II
Axles 2 and 3, right
8 Switch Drive switch
9 --
10 --
11 --
12 Rotary/toggle switch Outside mirror adjustment
Driver’s side / passenger side
13 --
14 Lever Parking brake
15 Button Independent rear axle steering
(optional), Switch 123 switched on
16 Cigarette lighter
18 Accelerator pedal Speed adjustment
19 Pedal Service brake
20 Lever Steering wheel adjustment, see
section 4.1.2, page 7
50--1--2040--315A_en 3/41
4
1
(3) 5 4
7
3 5
2
27 28 29 30 4 6
3
2
135
26
20 16
18 8
19
15
14
12
24
25
Z 56 107
4/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 107)
No. Designation Function
24 Double key Window passenger side (control in
driver’s door panel), see section
4.1.7, page 17
25 Double key Window driver’s side (control in
driver’s door panel) see section
4.1.7, page 17
26 Double key Window passenger side (control in
passenger door panel) see section
4.1.7, page 17
27 Reading light
28 Switch reading lamp push forward = reading light off
push back = reading light on
29 Interior light
30 Switch interior light push forward = interior light off
push back = interior light on (lights
up when door is opened,
goes out when door is closed)
135 Ignition starter switch see sect. 4.1.1, at page 7
50--1--2040--315A_en 5/41
4
135
Z 171 025
20
Z 55 598
6/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 171 025)
(Z 55 598)
Both the height and tilt of the steering wheel can be adjusted. The
steering wheel adjustment is locked and unlocked using lever
(20).
-- Hold the steering wheel, release lever (20) and adjust the
steering wheel.
50--1--2040--315A_en 7/41
4
14
13
15
16
17
1 2 3 4 5 6 7 10 11 12 9
Z 200 073
8/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 200 073)
50--1--2040--315A_en 9/41
4
14
13
15
16
17
1 2 3 4 5 6 7 10 11 12 9
Z 200 073
10/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 200 073)
13 Setting armrests
Control knob for adjusting the angle of the armrests
Driver’s seat:
-- Only set when the vehicle is stationary and the
parking brake is engaged. Setting the seat
while driving can distract the driver from the traffic
situation.
The seat fixing device has to latch audibly into place.
50--1--2040--315A_en 11/41
4
14
13
15
16
17
1 2 3 4 5 6 7 10 11 12 9
Z 200 073
12/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 200 073)
4.1.4 Headrest
The safety belt system incl. the seat belt anchorage points is an
essential part of the driver’s seat. No subsequent modifications
are allowed. If modifications are made, the operating licence will
expire.
Functional test
The locking function of the automatic can be checked by pulling
the belt quickly.
50--1--2040--315A_en 13/41
4
14/41 50--1--2040--315A_en
Driver’s Cab 4
-- Three point seat belts are not for people shorter than
150 cm.
These people require special equipment for protection
in the case of an accident (because safety belts were
not correctly fastened).
50--1--2040--315A_en 15/41
4
A
A
24
B
B
25
26
16/41 50--1--2040--315A_en
Driver’s Cab 4
50--1--2040--315A_en 17/41
4
4 3
6
1
Z 171 028
7
1
Z 171 029
18/41 50--1--2040--315A_en
Driver’s Cab 4
1 Lower beam
2 Upper beam
3 Headlamp flash
4 Indicators right
Up to pressure point = short indication
Beyond pressure point = continual indication
5 Indicators left
Up to pressure point = short indication
Beyond pressure point = continual indication
6 Horn
7 Wiper
“0” Switched off
“INT” Intermittent wiping
Basic setting of the wiping pause: 5 seconds.
“I” Slow
“II” Fast
50--1--2040--315A_en 19/41
4
5 4
3
3
2
Z 171 030
20/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 171 030)
Switch functions:
-- Engine control
= Engine control (idle speed, cruise control, speed setting)
-- Sustained--action brake
= exhaust brake (constant throttle brake /
exhaust brake), retarder (optional)
1 Engine control:
Increase idle speed,
accelerate vehicle,
store speed.
2 Engine control:
Reduce idle speed,
decelerate vehicle,
store speed.
3 Sustained--action brake:
Increase brake effect, (reduce speed, store)
Level 1 = exhaust brake (constant throttle brake / exhaust
brake)
Level 2--5 = retarder (optional)
4 Engine control
Switch off idle speed increase,
Switch off cruise control,
Switch off speed setting
5 Engine control
Switch on cruise control
50--1--2040--315A_en 21/41
4
100
120
80
60
km/h
40
0
20
Z 55 599
22/41 50--1--2040--315A_en
Driver’s Cab 4
50--1--2040--315A_en 23/41
4
60
40 80
km/h
20 100
0 120
31 33
32 34
35 36 37 38 39 40 41 42
Z 56 100
24/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 100)
50--1--2040--315A_en 25/41
4
60
40 80
km/h
20 100
0 120
51 53
52 54
43 44 45 46 47 48 49 50
Z 56 101
26/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 101)
50--1--2040--315A_en 27/41
4
60
61
62 63
Z 56 102
70 75 80 85
71 76 81 86
72 77 82 87
73 78 83 88
74 79 84 89
Z 56 103
28/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 102, Z 56 103)
50--1--2040--315A_en 29/41
4
70 75 80 85
71 76 81 86
72 77 82 87
73 78 83 88
74 79 84 89
Z 56 104
30/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 104)
No. Element Designation Function
78 H 307 Indicator light w/o function
79 H 306 Indicator light w/o function
80 H 315 Indicator light w/o function
81 H 314 Indicator light Hydraulic oil filter clogged (return 1 or
2)
82 H 313 Indicator light w/o function
83 H 312 Indicator light Front suspension not in middle
position (suspension circuit I) (press
button 39 or 42,indicator light flashes
during adjustment of level)
84 H 311 Indicator light Rear left suspension not in middle
position (suspension circuit II) (press
button 40 or 42, indicator light flashes
during adjustment of level)
85 H 320 Indicator light No flow in steering circuit 1
86 H 319 Indicator light No flow in steering circuit 2
87 H 318 Indicator light w/o function
88 H 317 Indicator light Front suspension not in middle
position (suspension circuit I) (press
button 39 or 42,indicator light flashes
during adjustment of level)
89 H 316 Indicator light Rear right suspension not in middle
position (suspension circuit III) (press
button 41 or 42, indicator light flashes
during adjustment of level)
The location of switches, buttons or lamps may be different in your crane
to the one shown here. The symbol on the actual switch indicates its full
function.
50--1--2040--315A_en 31/41
4
90 95 100 105
91 96 101 106
92 97 102 107
93 98 103 108
94 99 104 109
Z 56 105
Z 501 058
32/41 50--1--2040--315A_en
Driver’s Cab 4
50--1--2040--315A_en 33/41
4
60
40 80
km/h
20 100
0 120
110
112 113
111 114
Z 56 106
34/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 56 106)
The various items of information (111 -- 118) can be called up on the MFA
10 display unit (100) at the press of a button. The relevant LED comes
on.The assigned light--emitting diode (LED) comes on.
When the ignition is switched off, the display shows the time (above) and
the total operating hours (below). If no information is called up when the
ignition is on, (all light--emitting diodes (LED) are off), this information is
likewise displayed.
To reset the daily operating hours, button (116) must be held down for three
seconds.
If hydraulic oil or coolant temperature are too high or if voltage supply or
engine oil pressure are too low, this information flashes on the display, even
if it has not just been selected. At the same time, the assigned light--emitting
diode (LED) flashes and a warning signal sounds. These warning signals
can be acknowledged by actuating the particular button (3 seconds).
Setting the clock:
simultaneously press keys (116) and (117) for five seconds
the displayed time will flash
press keys (115), (116) and (117) or (118) until the correct time is set
the corresponding number is increased by one
Accepting the newly set time:
simultaneously press keys (116) and (117) until the time stops flashing
50--1--2040--315A_en 35/41
4
Z 501 151
36/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 501 151)
50--1--2040--315A_en 37/41
4
Z 501 152
38/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 501 152)
50--1--2040--315A_en 39/41
4
154
155
160
156
Z 501 153
40/41 50--1--2040--315A_en
Driver’s Cab 4
(Z 501 153)
50--1--2040--315A_en 41/41