The document describes how a system uses light from a mobile phone to display words on an LCD screen connected to an Arduino motherboard. Codes stored on the motherboard correspond to words that should be displayed for different durations of light, as sensed by an LDR sensor. When the sensor detects light from the mobile app, it sends the duration to the motherboard, which looks up and displays the corresponding words programmed for that time period on the LCD screen. The entire process takes about 0.85 seconds.
The document describes how a system uses light from a mobile phone to display words on an LCD screen connected to an Arduino motherboard. Codes stored on the motherboard correspond to words that should be displayed for different durations of light, as sensed by an LDR sensor. When the sensor detects light from the mobile app, it sends the duration to the motherboard, which looks up and displays the corresponding words programmed for that time period on the LCD screen. The entire process takes about 0.85 seconds.
The document describes how a system uses light from a mobile phone to display words on an LCD screen connected to an Arduino motherboard. Codes stored on the motherboard correspond to words that should be displayed for different durations of light, as sensed by an LDR sensor. When the sensor detects light from the mobile app, it sends the duration to the motherboard, which looks up and displays the corresponding words programmed for that time period on the LCD screen. The entire process takes about 0.85 seconds.
Codes and Execution of words for the particular time are stored in motherboard (Arduino) with the help of Arduino application by server and internet A specific app should be installed in the mobile to be used as light source (uploaded in google drive and barcode given at last) the interaction between both Arduino and mobile app as a result transfer data to each other
mobile app is designed with proper and specific codes
for the duration of flash light from the mobile. Then the LDR sensor will sense the duration of light from the source and send the information (the duration of flashlight on its) to motherboard and after this the motherboard will scan the particular code in memory for that specific time duration of light and send the words which are programmed for that time duration of light. from the source (mobile) and display that to the screen (lcd)this all mechanism takes hardly 0.85sec