Professional Documents
Culture Documents
Mecanismo CD CDM69BV de CX-BK1-72231
Mecanismo CD CDM69BV de CX-BK1-72231
SECTION 4
ASSEMBLY
• This set can be assembled in the order shown below.
mark
cam (gear)
boss
cam (BU U/D)
mark
21
CX-BK1
1 Align the mark on the rotary encoder (S771) with the projection of the assy.
2 Check that the cam (BU U/D) can not be rotated in the direction of arrow.
3 Install the gear (mode C)
rotary encoder
(S771) cam (BU U/D)
gear (mode C)
chassis
mark projection
shaft
mark A
mark D mark B
mark C
cam (gear)
22
CX-BK1
4-5. HOW TO INSTALL THE ROTARY ENCODER (S702), GEAR (STOCKER COMMUNICATION)
4 gear 5 screw
(stocker communication) (PTPWH2.6 × 8)
3 screw
(PWH2 × 6) 7 two screws
(PTPWH2.6 × 8)
2 five solders
gear
(stocker
communication)
i
m
CONNECTOR board
– rear –
boss
5 two screws
(PTPWH2.6 × 8)
4 two cams
(stocker U/D)
cam
screw hole
– rear –
23