Professional Documents
Culture Documents
Anvilets are manufactured to cover as many run sizes The following chart shows the range of run pipe sizes per outlet
as possible per outlet size. The range of run sizes is size.
based on a maximum gap 1/16" between the fitting and
the pipe on the largest size of run pipe shown on the
fitting.
STANDARD, EXTRA STRONG and CLASS 3000 FITTINGS. For outlet NPS 5 to 36, order for specific run pipe size.
3/8 x 1/8 2 1/2 - 1 1/4 x 1/8 1 1/2 x 1 1/2 6 - 5 x 1 1/2
1/2 x 1/8 36-3 x 1/8 2 x 1 1/2 12 - 8 x 1 1/2
1/8 1 - 3/4 x 1/8 1 1/2 2 1 /2 x 1 1/2 24 - 14 x 1 1/2
3 x 1 1/2 36 - 26 x 1 1/2
4 - 3 1/2 x 1 1/2
3/8 x 1/4 2 1/2 - 1 1/4 x 1/4 2x2 5x2
1/2 x 1/4 36 - 3 x 1/4 2 1/2 x 2 6x2
1/4 1 - 3/4 x 1/4 2 3x2 10 - 8 x 2
3 1/2 x 2 18 - 12 x 2
4x2 36 - 20 x 2
1/2 x 3/8 2 1/2 - 1 1/4 x 3 /8 2 1/2 x 2 1/2 6 x 2 1/2
1 - 3/4 x 3/8 36 - 3 x 3/8 3 x 2 1/2 8 x 2 1/2
3/8 2 1/2 3 1/2 x 2 1/2 12 - 10 x 2 1/2
4 x 2 1/2 18 - 14 x 2 1/2
5 x 2 1/2 36 - 20 x 2 1/2
2 1/2 - 2 x 1/2 3x3 8x3
1/2 x 1/2
8 - 3 x 1/2 3 1/2 x 3 10 x 3
3/4 x 1/2
1/2 1 x 1/2
36 - 10 x 1/2 3 4x3 14 - 12 x 3
5x3 36 - 24 x 3
1 1/2 - 1 1/4 x 1/2
6x3
3/4 x 3/4 5- 3 x 3/4 3 1/2 x 3 1/2 10 x 3 1/2
1 x 3/4 12 - 6 x 3/4 4 x 3 1/2 14 - 12 x 3 1/2
3/4 1 1/2 - 1 1/4 x 3/4 36 - 14 x 3/4 3 1/2 5 x 3 1/2 20 - 16 x 3 1/2
2 1/2 - 2 x 3/4 6 x 3 1/2 36 - 24 x 3 1/2
8 x 3 1/2
1x1 3 1/2 - 3 x 1 4x4 10 x 4
1 1/4 x 1 5-4x1 5x4 14 - 12 x 4
1 1 1/2 x 1 10 - 6 x 1 4 6x4 20 - 16 x 4
2x1 36 - 12 x 1 8x4 36 - 24 x 4
2 1/2 x 1
1 1/4 x 1 1/4 5 - 4 x 1 1/4
1 1/2 x 1 1/4 8 - 6 x 1 1/4
1 1/4 2 x 1 1/4 18 - 10 x 1 1/4
2 1/2 x 1 1/4 36 - 20 x 1 1/4
3 1/2 - 3 x 1 1/4
Example: 12 - 8 x 1 1/2
1
Created by Neevia Document Converter trial version http://www.neevia.com
Created by Neevia Document Converter trial version
If the schedules, or weights, of the branch and run pipe
12 are not the same, then they must be clearly specified.
- is the largest run pipe size for which the fitting is applicable.
8
- is the smallest run pipe size the fitting is applicable. Example:
1
- is the outlet (branch) size. 3 Sch. 80 x 1 1/2 Sch. 40 BW Anvilet.
1/2
BUTTWELD ANVILETS
Full and Reducing Sizes... Standard and Extra Strong
2
Created by Neevia Document Converter trial version http://www.neevia.com
STANDARD WEIGHT EXTRA STRONG
Nominal
Outlet Approx. Wt. Approx. Wt.
Run Pipe
Size Size A B C Pounds A B C Pounds
4 4 2 4 4 3/4 7.6 2 4 4 3/4 7.5
4 5 o 36 2 4 3/4 4 3/4 7.1 2 4 3/4 4 3/4 7.0
5 5 2 1/8 5 1/16 5 13/16 8.5 2 1/16 5 1/16 5 13/16 7.5
5 6 to 36 2 1/4 - 5 9/16 10.3 2 1/4 - 5 9/16 10.4
6 6 2 3/8 6 1/16 6 11/16 14 3 1/16 6 1/16 6 11/16 15
6 8 to 36 2 3/8 - 6 11/16 12 3 1/16 - 6 11/16 23
8 8 2 3/4 7 15/16 8 11/16 28 3 7/8 7 5/8 8 11/16 32
8 10 to 36 2 3/4 - 8 11/16 23 3 7/8 - 8 11/16 37
10 10 3 1/16 10 10 13/16 39 3 1/2 9 3/4 10 7/16 46
10 12 to 36 3 1/16 - 10 13/16 36 3 11/16 - 10 7/16 46
12 12 3 3/8 12 12 13/16 65 3 15/16 11 3/4 13 61
12 14 to 36 3 3/8 - 12 13/16 59 4 1/16 - 12 1/2 61
14 14 3 1/2 13 1/4 14 1/16 70 4 1/8 13 14 5/16 75
14 16 to 36 3 1/2 - 14 1/16 66 3 15/16 - 13 13/16 70
STANDARD WEIGHT EXTRA STRONG
Nominal
Outlet Approx. Wt. Approx. Wt.
Run Pipe
Size Size A B C Pounds A B C Pounds
16 16 3 11/16 15 1/4 16 1/16 92 4 7/16 15 16 1/2 115
16 18 to 36 3 11/16 - 16 1/16 75 4 3/16 - 15 7/8 102
18 18 4 1/16 17 1/4 18 5/8 125 4 11/16 17 18 5/8 130
18 20 to 36 3 13/16 - 18 1/16 97 4 3/8 - 17 15/16 130
20 20 4 5/8 19 1/4 20 1/16 175 5 19 20 13/16 187
20 24 to 36 4 - 20 118 4 11/16 - 20 1/16 158
4 24 5 5/8 23 1/4 25 1/8 280 5 1/2 23 25 1/8 316
24 26 to 36 4 9/16 - 24 3/16 220 5 1/2 - 24 3/16 290
Each outlet size of the reducing Anvilets listed above is All dimensions are in inches.
supplied in several different ranges or run pipe size. Please
refer to the run pipe sizes chart of this catalog.
STANDARD WEIGHT: Standard weight buttweld EXTRA STRONG: Extra strong buttweld Anvilets are
Anvilets are used with all sizes of Standard pipe or Sch. 40 used with all sizes of XS pipe and are used with Sch. 80
pipe, up to and including 10. These Anvilets may be used in pipe up to and including size 8. These Anvilets may be used
conjunction with Sch. 40 and Class 2000 fittings. in conjunction with Sch. 80 and class 3000 fittings.
Sch. 40 buttweld Anvilets of outlet size 24 and over are Sch. 80 buttweld Anvilets of outlet size 24 and over are
available upon request. available upon request.
BUTTWELD ANVILETS
Full and Reducing Sizes... Schedule 160 and Double Extra Strong
3
Created by Neevia Document Converter trial version http://www.neevia.com
1 Dimension 'H' is the distance in inches from
the centre of the run pipe to the face of the
Anvilet. The weld or root gap is not included
in the 'H' dimensions below.
SCHEDULE 160 and DOUBLE EXTRA STRONG
Outlet Approx. Wt.
Size A C Pounds
1/2 1 1/8 9/16 .25
3/4 1 1/4 3/4 .71
1 1 1/2 1 .83
1 1/4 1 3/4 1 5/16 1.25
1 1/2 2 1 1/2 1.75
2 2 3/16 1 11/16 2.13
2 1/2 2 7/16 2 1/8 3.38
3 2 7/8 2 7/8 6.32
4 3 5/16 3 7/8 10.50
5 3 11/16 4 13/16 14.25
6 4 1/8 5 3/4 29.5
The reducing Anvilets listed above for outlet sizes 1/2 to 2 Schedule 160 and Double Extra Strong buttweld Anvilets
are supplied in several different ranges of run pipe size for may be used in conjunction with Class 6000 fittings.
each outlet. Please refer to run pipe sizes chart of this
catalog.
FLAT ANVILETS
Class 3000 Threaded, Butweld & Socket Weld
4
Created by Neevia Document Converter trial version http://www.neevia.com
Approx. Wt.
Size A
Pounds
1/4 11/16 .11
3/8 13/16 .2
1/2 1 .3
3/4 1 1/16 .4
1 1 9/32 .7
1 1/4 1 11/32 .9
1 1/2 1 3/8 1.2
2 1 1/2 1.8
2 1/2 1 3/4 2.7
3 2 3.3
Flat Anvilets are designed to facilitate welding to a flat Class 6000 flat Anvilets are available on application.
surface for the installation of branch pipes or fittings.
5
Created by Neevia Document Converter trial version http://www.neevia.com
Class 3000 REDUCING and FULL SIZES
Nominal E Approx.
Outlet Run Pipe D1 +.01 Wt.
Size Size A B C ±.03 -.00 F Pounds
1/2 1/2 1 5/8 15/16 .622 .855 1 1/4 .2
1/2 3/4 to 36 1 15/16 15/16 .622 .855 1 1/4 .35
3/4 3/4 1 1/16 13/16 1 3/16 .824 1.065 1 7/16 .27
3/4 1 to 36 1 1/16 1 3/16 1 3/16 .824 1.065 1 7/16 .4
1 1 1 5/16 1 1/16 1 7/16 1.049 1.330 1 13/16 .6
1 1 1/4 to 36 1 5/16 1 7/16 1 7/16 1.049 1.330 1 13/16 .8
1 1/4 1 1/4 1 5/16 1 3/8 1 3/4 1.380 1.675 2 3/16 .8
1 1/4 1 1/2 to 36 1 5/16 1 3/4 1 3/4 1.380 1.675 2 3/16 1.1
1 1/2 1 1/2 1 3/8 1 5/8 2 1.610 1.915 2 7/16 1.2
1 1/2 2 to 36 1 3/8 2 2 1.610 1.915 2 7/16 1.5
2 2 1 1/2 2 1/16 2 9/16 2.067 2.406 2 15/16 1.8
2 2 1/2 to 36 1 1/2 2 9/16 2 9/16 2.067 2.406 2 15/16 2.0
2 1/2 2 1/2 1 13/16 2 1/2 3 2.469 2.906 3 7/16 2.5
2 1/2 3 to 36 1 13/16 3 3 2.469 2.906 3 7/16 3.0
Nominal E Approx.
Outlet Run Pipe D1 +.01 Wt.
Size Size A B C ±.03 -.00 F Pounds
3 3 2 3 1/16 3 11/16 3.068 3.535 4 1/8 3.8
3 3 1/2 to 36 2 3 11/16 3 11/16 3.068 3.535 4 1/8 4.2
3 1/2 3 1/2 2 1/8 3 9/16 4 3.548 4.040 4 3/4 4.3
3 1/2 4 to 36 2 1/8 4 4 3.548 4.040 4 3/4 4.3
4 4 2 1/4 4 1/16 4 3/4 4.026 4.545 5 1/8 7.2
4 5 to 36 2 1/4 4 3/4 4 3/4 4.026 4.545 5 1/8 8.0
6
Created by Neevia Document Converter trial version http://www.neevia.com
1 1 1/14 to 36 1 5/16 1 5/16 .815 1.330 2 1/4 1.8
1 1/4 1 1/2 to 36 1 5/16 1 1/2 1.160 1.675 2 9/16 2.6
1 1/2 2 to 36 1 3/8 1 15/16 1.338 1.915 3 3.0
2 2 1/2 to 36 1 1/2 2 3/4 1.687 2.406 3 5/8 5.8
Each outlet size of the reducing Anvilets listed above is Class 3000 socket weld Anvilets may be used with Standard and XS pipe.
supplied in several different ranges of run pipe size. Class 6000 socket weld Anvilets may be used with Sch. 160 and XXS pipe.
Please refer to the run pipe sizes chart in this catalog.
Note: 1 Tolerance on sizes 2 1/2 and larger is ±.06". All dimensions are in inches.
THREADED ANVILETS
Full and Reducing
Sizes ... Class 3000 and 6
7
Created by Neevia Document Converter trial version http://www.neevia.com
Size Pounds
3 3 2 3 1/16 3 11/16 4 1/8 4.3
3 3 1/2 to 36 2 3 11/16 3 11/16 4 1/8 4.4
3 1/2 3 1/2 2 1/8 3 9/16 4 4 5/8 4.5
3 1/2 4 to 36 2 1/8 4 4 4 5/8 5.6
4 4 2 1/4 4 1/16 4 3/4 5 1/8 7.3
5 5 to 36 2 1/4 4 3/4 4 3/4 5 1/8 8.3
ELBOW ANVILETS
Class 3000 and 6000 Buttweld, Threaded and Socket Weld
8
Created by Neevia Document Converter trial version http://www.neevia.com
CLASS 3000 THREADED and SOCKET WELD / STANDARD and XS BUTTWELD
Outlet Size Nominal Elbow Size C H Approx. Wt. Pounds
1/4 36-1 1/4 1 1/2 1 19/32 .5
3/8 36-1 1/4 1 1/2 1 19/32 .5
1/2 36-1 1/4 1 1/2 1 19/32 .65
3/4 36-1 1/4 1 23/32 1 7/8 .75
1 36-2 2 1/8 2 3/16 1.15
1 1/4 36-2 1 21/32 2 3/8 1.90
1 1/2 36-2 3 2 5/8 2.65
2 36-3 4 1/8 3 3/16 5.25
STANDARD nad XS BUTTWELD, ONLY
2 1/2 As Specified 4 3/16 3 1/4 5.5
3 As Specified 4 15/16 3 13/16 6.25
4 As Specified 6 7/16 4 1/2 11.75
6 As Specified 9 6 3/16 28.0
CLASS 6000 THREADED and SOCKET WELD / SCH. 160 and XXS BUTTWELD
Outlet Size Nominal Elbow Size C H Approx. Wt. Pounds
1/4 36-1 1/4 1 3/8 1 19/32 .75
3/8 36-1 1/4 1 3/8 1 19/32 .75
1/2 36-1 1/4 1 23/32 1 7/8 .85
3/4 36-2 2 1/8 2 3/16 1.25
1 36-2 2 21/32 2 3/8 2.2
1 1/4 36-2 3 2 5/8 3.9
1 1/2 36-3 4 1/8 3 3/16 6.2
Elbow Anvilets are welded 90° long radius elbows as branch All Dimensions are in inches.
connections for pipes and fittings. They are also used as pipe
hanger or support bosses.
LATERAL ANVILETS
Class 3000 and 6000 Buttweld, Threaded and Socket Weld
9
Created by Neevia Document Converter trial version http://www.neevia.com
Lateral Anvilets provide a strong, readily attached 45° lateral outlet connection
CLASS 6000 THREADED and SOCKET WELD / SCH. 160 and XXS BUTTWELD
Nominal
Outlet Size H B C Approx. Wt. Pounds
Run Pipe Size
1/4 2 1/2-1 1/4 / 12-3 1 1/2 2 1/4 1 3/8 .75
3/8 2 1/2-1 1/4 / 12-3 1 1/2 2 1/4 1 3/8 .75
1/2 1 1/2-1 1/4 / 5-2 / 12-6 1 13/16 2 3/4 1 23/32 .85
3/4 2 1/2-2 / 5-3 / 12-6 2 1/8 3 1/4 2 1/8 1.25
2 1/2-2 / 5-3 / 12-6 2 9/16 3 13/16 2 21/32 2.20
1 1/4 2 1/2-2 / 5-3 / 12-6 2 3/4 4 1/4 3 2.90
1 1/2 5-4 / 8-6 / 12-10 3 3/8 5 3/8 4 1/8 6.15
10
Created by Neevia Document Converter trial version http://www.neevia.com
CLASS 2000
THREADED FITTINGS
NOMINAL
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
PIPE SIZE
90° ELBOWS
A 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.28 4.19
H 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
App. Wt./100 pcs. 31 31 31 50 69 113 158 200 350 650 1100 2275
NOMINAL
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
PIPE SIZE
45° ELBOWS
C 0.75* 0.75* 0.75 0.88 1.00 1.12 1.31 1.38 1.69 2.06 2.50 3.12
H 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
11
Created by Neevia Document Converter trial version http://www.neevia.com
NOMINAL
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
PIPE SIZE
TEES
A 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.28 4.19
H 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
App. Wt./100 pcs. 31 31 31 69 94 144 200 275 463 869 1319 2725
NOMINAL
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
PIPE SIZE
CROSSES
A 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.28 4.19
H 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
App. Wt./100 pcs. 50 50 50 88 113 169 250 319 525 1644 1950 3269
CLASS 3000
THREADED FITTINGS
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2
90° ELBOWS
A 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25
12
Created by Neevia Document Converter trial version http://www.neevia.com
H 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00
App. Wt./100 pcs. 38 38 63 88 138 225 260 490 519 1050
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2
45° ELBOWS
C 0.75* 0.75 0.88 1.00 1.12 1.31 1.38 1.69 1.72 2.06
H 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2
TEES
A 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25
H 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00
App. Wt./100 pcs. 38 38 81 119 188 310 350 640 686 1313
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2
CROSSES
A 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25
H 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00
App. Wt./100 pcs. 38 38 100 150 250 356 413 650 813 1675
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2
STREET ELBOWS
A 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25
G 1.25 1.25 1.50 1.69 1.94 2.31 2.69 2.81 3.38 -
13
Created by Neevia Document Converter trial version http://www.neevia.com
H 1.00 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00
App. Wt./100 pcs. 25 25 38 55 88 144 250 425 519 -
CLASS 6000
THREADED FITTINGS
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90° ELBOWS
A 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 4.50
H 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
App. Wt./100 pcs. 25 63 106 163 250 325 650 725 1325 2088 3456 -
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
45° ELBOWS
C 0.75 0.88 1.00 1.12 1.31 1.38 1.69 1.72 2.06 2.50 3.12 3.12
H 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
App. Wt./100 pcs. 25 59 88 144 219 269 469 575 950 1500 3056 -
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
14
Created by Neevia Document Converter trial version http://www.neevia.com
TEES
A 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 4.50
H 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
App. Wt./100 pcs. 50 100 138 213 363 463 763 963 1888 2806 4563 -
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
CROSSES
A 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 -
H 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 -
App. Wt./100 pcs. 56 119 150 275 431 563 1075 1150 2219 2750 5400 -
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
STREET ELBOWS
A - 1.00 1.12 1.38 1.75 2.00 2.12 2.50 - - - -
G - 1.50 1.63 1.88 2.25 2.62 2.81 3.31 - - - -
15
Created by Neevia Document Converter trial version http://www.neevia.com
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
COMMON
DIMENSIONS
.420/ .555/ .690/ .855/ 1.065/ 1.330/ 1.675/ 1.915/ 2.406/ 2.906/ 3.535/ 4.545/
B (Socket Dia.) .440 .575 .710 .875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
C (Min.) 0.13 0.13 0.14 0.16 0.17 0.20 0.21 0.22 0.24 0.30 0.33 0.37
.239/ .334/ .463/ .592/ .794/ 1.019/ 1.350/ 1.580/ 2.037/ 2.409/ 3.008/ 3.966/
D (Bore Dia.) .299 .394 .523 .652 .854 1.079 1.410 1.640 2.097 2.529 3.128 4.086
J (Min. Socket Depth) 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90° ELBOWS
A
0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
(Nominal)
App. Wt.
13 13 25 50 69 106 163 213 290 638 1088 2369
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
45° ELBOWS
A
0.31 0.31 0.31 0.44 0.50 0.56 0.69 0.81 1.00 1.12 1.25 1.62
(Nominal)
App. Wt.
13 13 19 38 50 88 125 163 269 675 1050 1819
/100 pcs
16
Created by Neevia Document Converter trial version http://www.neevia.com
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
TEES
A 0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
App. Wt.
25 25 34 69 88 144 213 263 444 888 1369 2844
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
CROSSES
A 0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
App. Wt.
25 31 31 81 113 156 244 325 550 1581 2019 3150
/100 pcs
CLASS 6000
SOCKET WELDING FITTINGS
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
17
Created by Neevia Document Converter trial version http://www.neevia.com
COMMON
DIMENSIONS
.420/ .555/ .690/ .855/ 1.065/ 1.330/ 1.675/ 1.915/ 2.406/ 2.906/ 3.535/ 4.545/
B (Socket Dia.) .440 .575 .710 .875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
C (Min.) 0.14 0.16 0.17 0.20 0.24 0.27 0.27 0.31 0.37 0.41 0.48 0.58
.126/ .220/ .329/ .434/ .582/ .785/ 1.130/ 1.308/ 1.657/ 2.065/ 2.564/ 3.378/
D (Bore Dia.) .189 .280 .389 .494 .642 .845 1.190 1.368 1.717 2.185 2.684 3.498
J (Min. Socket Depth) 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90° ELBOWS
A
0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
(Nominal)
App. Wt.
- - - 88 144 250 325 531 638 1200 1938 3638
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
45° ELBOWS
A
0.31 0.31 0.44 0.50 0.56 0.69 0.81 1.00 1.12 1.25 1.38 1.58
(Nominal)
App. Wt.
- - - 69 131 200 263 475 588 713 1231 2700
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
TEES
A - - - 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
App. Wt.
- - - 106 206 338 431 781 869 1663 2381 4532
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
CROSSES
A - - - 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
18
Created by Neevia Document Converter trial version http://www.neevia.com
App. Wt.
- - - 125 250 400 513 900 950 1988 2950 4150
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
HEX HEAD
F 0.44 0.62 0.69 0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.50 4.62
(Across Flats)
A 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
H 0.25 0.25 0.31 0.31 0.38 0.38 0.56 0.62 0.69 0.75 0.81 1.00
App. Wt. 130
3 6 10 17 32 48 95 136 225 388 588
/100 pcs 0
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
ROUND HEAD
A 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
D 1.38 1.62 1.62 1.75 1.75 2.00 2.00 2.00 2.50 2.75 2.75 3.00
E 0.41 0.53 0.69 0.84 1.06 1.31 1.69 1.91 2.38 2.88 3.50 4.50
19
Created by Neevia Document Converter trial version http://www.neevia.com
App. Wt. 128
13 13 18 25 38 75 113 156 300 475 763
/100 pcs 8
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
BUSHINGS
HEX HEAD
A - 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
F - 0.62 0.69 0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.50 4.62
G - 0.12 0.16 0.19 0.22 0.25 0.28 0.31 0.34 0.38 0.41 0.50
1
Lowest Reduction - 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/2 1/2
1/2
App. Wt.
- 2 5 6 13 19 39 68 163 238 350 831
/100 pcs
NOMINAL PIPE SIZE 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
FLUSH
A - 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
1
Lowest Reduction - 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 3/4 1
1/2
App. Wt.
- 2 5 6 13 13 13 19 38 63 100 200
/100 pcs
Note: Plugs and bushings are not identified by pressure class. They
may be used for ratings up to pressure class 6000 (per ASME B 16.11)
20
Created by Neevia Document Converter trial version http://www.neevia.com
TYPE 1 REDUCER INSERT TYPE 2 REDUCER INSERT
NOM. SOCKET SHANK Class 3000 - For Use With Class 6000 - For Use With
PIPE DEPTH Schedule 40 and 80 Pipe Schedule 160 Pipe
Dia. Min. Dia.
SIZE Type A D C SL RL Type A D C SL RL
B J SD
3/8 x 1/4 0.56 0.38 0.68 1 .75 .36 .149 .56 - 1 .81 .25 .181 .62 -
1/2 x 3/8 0.70 0.38 0.84 1 .81 .49 .158 .62 - 1 .88 .36 .198 .68 -
x 1/4 0.56 0.38 0.84 1 .81 .36 .149 .68 - 1 .81 .25 .181 .68 -
3/4 x 1/2 0.86 0.38 1.05 1 .88 .62 .184 .69 - 1 1.00 .46 .235 .75 -
x 3/8 0.70 0.38 1.05 2 .62 .49 .158 - 1.06 1 .88 .36 .198 .75 -
x 1/4 0.56 0.38 1.05 2 .69 .36 .149 - 1.06 2 .88 .25 .181 - 1.26
1x 3/4 1.07 0.50 1.31 1 .94 .82 .193 .75 - 1 1.12 .61 .274 .81 -
x 1/2 0.86 0.38 1.31 2 .62 .62 .184 - 1.12 1 1.12 .46 .235 .81 -
x 3/8 0.70 0.38 1.31 2 .69 .49 .158 - 1.12 2 .88 .36 .198 - 1.31
x 1/4 0.56 0.38 1.31 2 .75 .36 .149 - 1.12 2 .94 .25 .181 - 1.31
NOM. SOCKET SHANK Class 3000 - For Use With Class 6000 - For Use With
PIPE DEPTH Schedule 40 and 80 Pipe Schedule 160 Pipe
Dia. Min. Dia.
SIZE Type A D C SL RL Type A D C SL RL
B J SD
1 1/4 x 1 1.33 0.50 1.66 1 1.00 1.05 .224 .81 - 1 1.19 .81 .312 .88 -
x 3/4 1.07 0.50 1.66 2 .69 .82 .193 - 1.25 2 .81 .61 .274 - 1.37
x 1/2 0.86 0.38 1.66 2 .75 .62 .184 - 1.25 2 .88 .46 .235 - 1.37
x 3/8 0.70 0.38 1.66 2 .81 .49 .158 - 1.25 2 .94 .36 .198 - 1.37
x 1/4 0.56 0.38 1.66 2 .88 .36 .149 - 1.25 2 1.00 .25 .181 - 1.37
1 1/4
1 1/2 x 1.68 0.50 1.90 1 1.12 1.38 .239 .88 - 1 1.38 1.16 .312 1.00 -
x 1 1.34 0.50 1.90 2 .69 1.05 .224 - 1.31 1 1.12 .81 .312 1.00 -
x 3/4 1.07 0.50 1.90 2 .75 .82 .193 - 1.31 2 1.00 .61 .274 - 1.56
x 1/2 0.86 0.38 1.90 2 .81 .62 .184 - 1.31 2 1.06 .46 .234 - 1.56
x 3/8 0.70 0.38 1.90 2 .88 .49 .158 - 1.31 2 1.12 .36 .198 - 1.56
2x 1 1/2 1.92 0.50 2.38 1 1.25 1.61 .250 1.00 - 1 1.81 1.34 .351 1.56 -
x 1 1/4 1.68 0.50 2.38 2 .81 1.38 .239 - 1.50 2 .94 1.16 .312 - 1.81
x 1 1.34 0.50 2.38 2 .88 1.05 .224 - 1.50 2 1.00 .82 .312 - 1.81
x 3/4 1.07 0.50 2.38 2 .94 .82 .193 - 1.50 2 1.06 .61 .274 - 1.81
x 1/2 0.86 0.38 2.38 2 1.00 .62 .184 - 1.50 2 1.12 .46 .235 - 1.81
NOM. SOCKET SHANK Class 3000 - For Use With Class 6000 - For Use With
PIPE DEPTH Schedule 40 and 80 Pipe Schedule 160 Pipe
Dia. Min. Dia.
SIZE Type A D C SL RL Type A D C SL RL
B J SD
2 1/2 x 2 2.41 0.62 2.88 1 1.81 2.07 .273 1.50 - 1 1.68 1.69 .430 1.25 -
x 1 1/2 1.92 0.50 2.88 2 1.38 1.61 .250 - 2.12 - - - - - -
x 1 1/4 1.68 0.50 2.88 2 1.44 1.38 .239 - 2.12 - - - - - -
x 1 1.34 0.50 2.88 2 1.50 1.05 .226 - 2.12 - - - - - -
x 3/4 1.07 0.50 2.88 2 1.56 .82 .193 - 2.12 - - - - - -
21
Created by Neevia Document Converter trial version http://www.neevia.com
x 1 1/2 1.92 0.50 3.50 2 1.12 1.61 .250 - 1.87 - - - - - -
x 1 1/4 1.68 0.50 3.50 2 1.19 1.38 .239 - 1.87 - - - - - -
x 1 1.34 0.50 3.50 2 1.25 1.05 .224 - 1.87 - - - - - -
THREADED UNIONS
22
Created by Neevia Document Converter trial version http://www.neevia.com
Nominal Pipe Size Dimensions
Approx. Wt.
Class 3000 Class 6000 L M A min. lbs./100 pcs.
1/4 - 1.93 1.50 0.75 35
• Steel-to-steel seats
• A.S.T.M. Steel specification A105.
• Manufactured to MSS-SP83 specifications.
(Class 6000 by method of MSS-SP83).
• Taper threaded to ASME standard B1.20.1
• Class 3000 brass-to-steel seats also available. Refer to price
list.
23
Created by Neevia Document Converter trial version http://www.neevia.com
SOCKET WELDING UNIONS
• Steel-to-steel seats
• A.S.T.M. Steel specification A105.
• Manufactured to MSS-SP83 specifications.
(Class 6000 by method of MSS-SP83).
• Taper threaded to ASME standard B1.20.1
• Class 3000 brass-to-steel seats alse available.
Refer to price list.
24
Created by Neevia Document Converter trial version http://www.neevia.com
Nominal Pipe Size Dimensions
Approx.
Wt.
B B lbs./100 pcs.
Class 3000 Class 6000 L M A min. K min.
Class 3000 Class 6000
1/4 - 1.93 1.50 .86 .56 .42 .38 34
3/8 1/4 2.08 1.69 1.02 .69 .56 .38 49
1/2 3/8 2.18 1.81 1.23 .86 .69 .38 63
3/4 1/2 2.50 2.19 1.46 1.07 .86 .50 106
1 3/4 2.69 2.56 1.79 1.33 1.07 .50 160
1 1/4 1 2.80 3.06 2.16 1.68 1.33 .50 235
1 1/2 1 1/4 3.01 3.42 2.42 1.92 1.68 .50 312
2 1 1/2 3.39 4.09 2.96 2.41 1.92 .62 452
2 1/2 2 4.03 4.88 3.61 2.91 2.41 .62 820
3 - 4.29 5.75 4.30 3.54 - .62 1160
STANDARD
MERCHANT COUPLINGS
25
Created by Neevia Document Converter trial version http://www.neevia.com
Couplings from NPS 1/8 through 2 are
dipped in rust
preventative.
EXTRA STRONG
COUPLINGS
26
Created by Neevia Document Converter trial version http://www.neevia.com
Manufactured in accordance with ASTM
specification A865.
27
Created by Neevia Document Converter trial version http://www.neevia.com
A.P.I. LINE PIPE
COUPLINGS
28
Created by Neevia Document Converter trial version http://www.neevia.com
10 11.750 5 3/4 3155 -
12 14.000 6 1/8 4927
29
Created by Neevia Document Converter trial version http://www.neevia.com
PLUGS, BUSHINGS AND HEX CAPS
MERCHANT STEEL
30
Created by Neevia Document Converter trial version http://www.neevia.com
1 .75 1/2 5/8 .20 11 1/2 21 75
1 1/4 .80 3/4 3/4 .25 11 1/2 34 50
1 1/2 .83 3/4 1 .25 11 1/2 52 25
2 .88 7/8 1 .26 11 1/2 85 20
* 1/8 size not available Square Socket. All sizes Taper Tapped - 3/4 per foot on diameter. All dimensions are in inches
FINISH OR COATING Black - Dipped in rust resistant Galvanized - Zinc plated inside and out.
GALVANIZED
STEEL FITTINGS
FOR PLASTIC PIPE
31
Created by Neevia Document Converter trial version http://www.neevia.com
1 3 1/4 7 34 1 3 5/8 7 35
1 1/4 3 1/2 7 52 1 1/4 3 5/8 7 45
1 1/2 4 7 69 1 1/2 4 1/4 7 67
2 4 7 94 2 4 1/4 7 80
2 1/2 5 3/4 8 190 2 1/2 7 8 220
3 6 8 280 3 7 8 325
4 7 1/4 8 470 4 8 3/4 8 550
BRASS MALE ADAPTERS AND INSERT COUPLINGS AVAILABLE ON REQUEST
FEMALE ADAPTERS AVAILABLE ON REQUEST
32
Created by Neevia Document Converter trial version http://www.neevia.com
Specification A733 "Welded and Seamless Carbon
Steel and Austenitic Stainless Steel Pipe Nipples"
Carbon Steel - Welded A53-F
ERW A53B-E
Seamless A106B
Low Temperature Seamless A333 - Grade 6
FINISHES
Canvil steel nipples are available in black or zinc
coatings. Please specify finish required when
ordering.
THREADS
Canvil pipe nipples are threaded on both ends with
standard tapered pipe threads conforming to the
American Standard for Pipe Threads ANSI/ASME
B1.20.1
SPECIAL LENGTHS
Canvil can supply special lengths, special threading
and special finishes to order.
LENGTH
Nipples with lengths up through 12 in. long have a
length tolerance of ± 1/16 in. Nipples over 12 in.
long have a tolerance of ± 1/8 in.
IDENTIFICATION
(where practical)
Welded - STD none
XS "Trademark, XS"
33
Created by Neevia Document Converter trial version http://www.neevia.com
TANK LEGS
"TANK LEGS"
• For use with standard Steel Tanks
• No cradle required
• Available in various sizes
• Threaded One-End X Square Cut
• Available from stock, Black
Part #
1 - 1/4" x 6" Q21126
1 - 1/4" x 7" Q21127
1 - 1/4" x 8" Q21128
1 - 1/4" x 9" Q2113
1 - 1/4" x 10" Q21135
1 - 1/4" x 12" Q2114
SWAGED NIPPLES
34
Created by Neevia Document Converter trial version http://www.neevia.com
MATERIAL
Unless otherwise specified, Canvil
concentric Swaged Nipples NPS 2
and larger are manufactured from
seamless pipe that meets the
chemical and mechanical property
requirements of ASTM A106
Grade B. They are marked
"A106B" (or "WPB" in
accordance with fittings
specification ASTM A234).
35
Created by Neevia Document Converter trial version http://www.neevia.com
1/2 4 21/64 - .8 1.1 1.6
3/8 4 27/64 - .8 1.1 1.6 5x 4 11 29/64 13 17 24 -
1 1/2 x 1/4 4 31/64 - .8 1.1 1.6 3 11 7/8 13 17 24 -
1 1/4 4 1/2 7/64 - 1.2 1.7 2.4 2 1/2 11 1 9/64 13 17 24 -
1 4 1/2 1/4 - 1.2 1.7 2.4 2 11 1 9/32 13 17 24 -
3/4 4 1/2 21/64 - 1.2 1.7 2.4 1 1/2 11 1 31/64 13 17 24 -
1/2 4 1/2 27/64 - 1.2 1.7 2.4 1 1/4 11 1 37/64 13 17 24 -
3/8 4 1/2 17/32 - 1.2 1.7 2.4 1 11 1 47/64 13 17 24 -
1/4 4 1/2 39/64 - 1.2 1.7 2.4
6x 5 12 13/32 19 25 - -
2x 1 1/2 6 1/2 13/64 1.5 2 2.8 4 4 12 7/8 19 25 - -
1 1/4 6 1/2 19/64 1.5 2 2.8 4 3 12 1 19/64 19 25 35 -
1 6 1/2 29/64 1.5 2 2.8 4 2 1/2 12 1 9/16 19 25 35 -
3/4 6 1/2 17/32 1.5 2 2.8 4 2 12 1 45/64 19 25 35 -
1/2 6 1/2 5/8 1.5 2 2.8 4 1 1/2 12 1 57/64 19 25 35 -
3/8 6 1/2 3/4 1.5 2 2.8 4 1 1/2 12 2 19 25 35 -
1/4 6 1/2 13/16 1.5 2 2.8 4 1 12 2 9/64 19 25 35 -
2 1/2 x 2 7 9/64 2.3 3 4.2 6
1 1/2 7 21/64 2.3 3 4.2 6 8x 6 13 63/64 33 44 - -
1 1/4 7 7/16 2.3 3 4.2 6 5 13 1 13/32 33 44 - -
1 7 37/64 2.3 3 4.2 6 4 13 1 55/64 33 44 - -
3/4 7 21/32 2.3 3 4.2 6 3 13 2 9/32 33 44 - -
1/2 7 3/4 2.3 3 4.2 6 2 1/2 13 2 35/64 33 44 - -
2 13 2 11/16 33 44 - -
BULL PLUGS
36
Created by Neevia Document Converter trial version http://www.neevia.com
MATERIAL
Unless otherwise specified, Canvil Bull Plugs NPS 2 and larger
are manufactured from seamless pipe that meets the chemical and
mechanical property requirements of ASTM A106 Grade B. They
are marked "A106B" (or "WPB" in accordance with fittings
specification ASTM A234).
Bull Plugs 1 1/2 and smaller are manufactured from round or hex
material that meets the chemical and mechanical property
requirements of ASTM A105. They are marked "A105" (or
"WPB").
Round Bull Plugs are available in all regular schedules (A) and
also in solid form (B).
All dimensions are in inches.
Approximate Weight Each, Pounds
Nominal
Pipe SCH SCH SCH ROUND HEX. HEX.
Length XXS
Size 40 80 160 SOLID SOLID SCH 80
1/8 2 - - - - .77 .14 -
1/4 2 .08 .10 - - .12 .18 .11
3/8 2 1/4 .12 .16 - - .22 .24 .15
1/2 2 1/2 .20 .24 .32 .4 .38 .42 .28
3/4 2 3/4 .26 .36 .5 .6 .61 .69 .50
1 3 .6 .8 1.1 1.2 1.0 1.3 .81
1 1/4 3 1/4 .63 .94 1.2 1.5 1.7 2.5 1.3
1 1/2 3 1/2 .9 1.2 1.6 2.0 3.0 3.0 1.5
2 4 1.6 2.25 3.3 4.0 4.5 5.2 2.4
2 1/2 5 2.8 3.8 5.0 6.8 - - -
3 6 4.6 5.9 8.0 9.0 - - -
3 1/2 6 1/2 5.7 7.8 - 13.5 - - -
4 7 9.3 10.0 16.0 18.5 - - -
FINISH
Swaged Nipples and Bull Plugs are supplied
black with rust protection unless zinc plating is
specified.
37
Created by Neevia Document Converter trial version http://www.neevia.com
BBE Bevelled Both Ends Note: (1) Unless otherwise specified concentric
TBE Threaded Both Ends Swaged Nipples will be supplied.
PBE Plain Both Ends
LEB Large End Bevelled
LET Large End Threaded (2) Swaged Nipples can be supplied with a
LEP Large End Plain different schedule wall thickness at each
SEB Small End Bevelled end.
SET Small End Threaded
SEP Small End Plain
Steel
HOSE FITTINGS
for FAST, ECONOMICAL hose connections & repairs
COMBINATION NIPPLES
Designed for easy adaptation of straight end
industrial hose to N.P.T. threaded fittings on
pumps, strainers, valves etc. May also be
attached to other lengths of hose by means of a
swivel female coupling.
Can be used for most suctional and discharge
applications where moderated pressures are
encountered. Plated nipples are recommended
where corrosion is encountered.
Not intended for compressed air.
HOSE MENDERS
38
Created by Neevia Document Converter trial version http://www.neevia.com
Ideal for fast, lasting, on-the-spot repairs of
damages hose, or for joining lengths of hose
without the bulk of swivel fittings.
Can help minimize hose wastage when used to
adapt short or odd lengths of hose to meet
specific needs.
39
Created by Neevia Document Converter trial version http://www.neevia.com