Professional Documents
Culture Documents
5-1200MHz
Broadband RF Splitter
Broadband
MCR Broadband’s ME series RF Tin-plated, zinc die-cast housing with high precision machined SCTE
passive are technically configured to compliant threaded ports are spaced on one-inch centers. Solder
back, tin-plated, zinc die-cast backplate provides for -130dB RFI. High
provide excellent DOCSIS© and QAM quality housing meets requirements of ASTM B117-97 electrostatic salt
transmissions paths while allows the fog testing standards.
bandpass and port to port PHY layer
All F ports are water sealed to withstand up to 30 P.S.I. internal pressure.
path loss transmission needs of MOCA
enabled home networking devices. 4-3000MHz, patent-pending, gold plated, 360º center conductor
seizing pin is durable to resist oxidation, maintaining a distortion free
RF passives distribute modulated RF signal for digital data transmission. All F ports exceed 200 gram retension
Video and data signals throughout the requirments for center conductor extraction.
subscriber’s single family and multi-
Glass PCB with micro strip design, SMT technology throughout. Input F
family residential or business dwelling. port passes 6kV 200a at 0.5uS-100kHz duty cycle ring wave surge test
The device is intented to provide a (IEEEC62.41 Cat A3 standard). MCR’s patent-pending SurgeRing™ is
in all ports.
centralized point of termination for all
“smart house” wiring coaxial media Built-in capacitors on all ports not only block DC or low-frequency AC,
wiring within the dwelling. The RF but also remove sheath currents flowing through ferrite cores, reducing
hum modulation.
passives provides forecasted signal
attenuation for all broadband signals Proprietary magnetism resistant ferrite core prevents saturation and
generated externally or internally of maintains a low intermodulation distortion beyond 110dBc for digital
quality return path signal. Second Harmonic -60dBmV is measured with
the dwelling. dual 55DBmV return carriers.
Meets all applicable SCTE and CEA standards in effect at the time of
manufacturing. Temperature-hardened components maintain
temperature stability from - 40ºC to 85ºC in port to port isolation, return
loss, and flatness.
www.mcrbroadband.com • 954-577-2600
MCR broadband BY MCR GROUP, INC Broadband
nd
nd
a
a
b
b
d
25.0
25.1
a
a
49.8
49.8
24.8
ro
ro
ro
49.8
b
R
R
C
C
M
M
nd
nd
nd
a
a
b
b
15.3
15.3
d
d
15.3
a
a
ro
ro
ro
b
b
R
C
M
All measurements in mm
www.mcrbroadband.com • 954-577-2600
MCR-B-ME-2 © Cable Television Laboratories, Inc. 2005. All Rights Reserved.