Professional Documents
Culture Documents
REV.: I
WORK ORDER DATE:01/09/2016
Task to be Complied
DEFECT REPORTED:
l. No.2 engine oil pressure indicating needle reads below zero.
ACTION:
1 Check physical conditions of all concerned connectors.
2 Inspect the electrical wiring of No. 2 engine oil pressure indicating circuit as per
Wiring Diagram Manual MCS77-20-00-001.
3 Replace component as required.
4 Ascertain the serviceability of the system by giving a ground run.
……………………………………………………………………………………………………………....
AMM/EMM/Task Card Revision Status: -ORION REV 07. ARRIEL IC EMM REV26
I certify that I have carried out the above mentioned job as specified in the Work Order.