Professional Documents
Culture Documents
Journal List
Journal List
2
2018
2018
1 Introduction 3
2009
1
4
2009
5 2016
2017
6
2 FDM 7 2014
8 2015
9 2017
2015
1110 2014
12 2018
3 DOE
13 2014
14 2017
4 EXP SETUP
2013
15
2017
5 EXP PROCEDURE 16
17
2018
2013
18
6 RESULTS AND DISCUSSION
19
2013
1. Experimental Investigation using Taguchi Method to Optimize Process Parameters of Fused Deposition Modeling for ABS
and Nylon Materials.
2.Mechanical characterization of 3D-printed polymers
3. Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging
Technique
1.Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method 2.
Enhancing Impact Strength of Fused Deposition Modeling Built Parts using Polycarbonate Material
3. A Review of FDM
Based Parts to Act as Rapid Tooling 4.
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanic
Study between PEEK and ABS 5.Selected mechanical
properties of PETG 3-D prints 6.
Optimization of the Printing Parameters Affecting Dimensional Accuracy and Internal Cavity for HIPS Material Used in Fused
Deposition Modeling Processes. 7.
Comparison of Most Suitable 3D Printing Materials, Failure Testing of PLA and ABS and Experimental Testing of PLA by Instron
Machine
2 2014
3 2015
4 2016
5 2017
6 2018
7 2018
8 2018
9 2018
10 2017
11 2014
12 2009
13 2018
14 2014
15 2018
16 2015
17 2017
18 2015
19 2013
20 2013
Title
Improving dimensional accuracy of Fused Deposition Modelling processed
part using grey Taguchi method
Optimization of the Printing Parameters Affecting Dimensional Accuracy and Internal Cavity for HIPS Material
Used in Fused Deposition Modeling Processes
Enhancing Impact Strength of Fused Deposition Modeling Built Parts using Polycarbonate Material
Comparison of Most Suitable 3D Printing Materials, Failure Testing of PLA and ABS and Experimental Testing of PLA by Instron
Machine
Experimental Investigation using Taguchi Method to Optimize Process Parameters of Fused Deposition Modeling for ABS and
Nylon Materials
Fatigue Lifespan
Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging
Technique
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused
Deposition Modeling
Influence of Some Process Parameters on Build Time, Material Consumption, and Surface Roughness of FDM Processed Parts:
Inferences Based on the Taguchi Design of Experiments
Parametric Optimization Study of ABS Material Using FDM Technique for Fatigue Life Prediction
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative
Mechanical Study between PEEK and ABS