The document introduces an automatic sodium sensor regeneration module for the AMI Sodium P analyzer. The module performs scheduled etching of the sodium sensor using a regeneration solution to maintain fast sensor response for low ppb sodium concentrations. It installs on the analyzer panel and is controlled by firmware. The module is recommended for applications with continuous low sodium levels to prevent the sodium sensor's response time from increasing due to depletion. It is compatible with specific AMI Sodium P analyzer models and includes installation hardware, but the regeneration solution must be purchased separately.
Original Description:
ssensor automatico
Original Title
Product info_20211123_new product_automatic Na sensor regeneration AMI Sodium P
The document introduces an automatic sodium sensor regeneration module for the AMI Sodium P analyzer. The module performs scheduled etching of the sodium sensor using a regeneration solution to maintain fast sensor response for low ppb sodium concentrations. It installs on the analyzer panel and is controlled by firmware. The module is recommended for applications with continuous low sodium levels to prevent the sodium sensor's response time from increasing due to depletion. It is compatible with specific AMI Sodium P analyzer models and includes installation hardware, but the regeneration solution must be purchased separately.
The document introduces an automatic sodium sensor regeneration module for the AMI Sodium P analyzer. The module performs scheduled etching of the sodium sensor using a regeneration solution to maintain fast sensor response for low ppb sodium concentrations. It installs on the analyzer panel and is controlled by firmware. The module is recommended for applications with continuous low sodium levels to prevent the sodium sensor's response time from increasing due to depletion. It is compatible with specific AMI Sodium P analyzer models and includes installation hardware, but the regeneration solution must be purchased separately.
2021 for subsidiaries and distributors only New product: Automatic Sodium Sensor Regeneration for AMI Sodium P
SWAN Analytical Instruments AG intro-
duces a programmable automatic sodium sensor regeneration module for AMI Sodium P (400 mm panel version), which is availa- ble separately or as a configurable option.
Article number Description
A-82.311.200 Sensor regeneration for AMI Sodium P
The regeneration module is installed on
the analyzer panel of AMI Sodium P and controlled by the instrument's firmware. The module performs etching of the sodium sensor with the SWAN sensor regeneration solution (available separately) at user-programmed time intervals and for user-programmed durations. Application The regeneration module is recommended for applications with low ppb concentrations of sodium to main- tain a fast sensor response. When a sodium sensor is used continuously in high purity water, sodium leaches into the water from the sensor surface. A depleted layer forms on the sensor surface and the response time to a step change in sodium concentration increases. The depleted layer is removed manually with an etching solution before each sensor calibration and additionally, if desired, up to daily through the automatic application of the re- generation solution. Compatibility AMI Sodium P analyzers on 400 mm panel A-24.421.100, AC-version: SN > 6707 A-24.422.100, DC-version: SN > 1003 Please contact SWAN Support for older AMI Sodium P analyzers. Scope of delivery Regeneration module for sodium sensor Installation hardware including tubing and fittings Installation instructions Not included: Regeneration solution. Please use the regeneration module with Article number Description A-85.810.200 Regeneration solution for sodium electrodes (500 mL)
1/1
Product information for subsidiaries and distributors, 23.11.2021, A. Rodenberg