Professional Documents
Culture Documents
RECOMMENDED MODIFICATION
DESIGNATION: UNIT-FILLING,NITROGEN
NOTE: N/A
MODIFICATION INSTRUCTION:
HISTORY:
TEB Issue No Change Description Drawing Issue Category
3 CE certification update. K00 recommended
4 GIM updated L00 recommended
Page: 1
Date: 05/02/2017
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
REACH Compliant
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
Document Validation
Record of Revisions
Reference of the
Issue Date Affected Page(s) Reason for revision
document used
F 8 P/N MODIFICATION
Updated template CE
G 11/10/2016 All
directive
Improvement of test
H 24/04/2017 13
periodical
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
Table of Contents
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
1 Prerequisites
1.1 General information
All following instructions are only applicable for GSE/Tool P/N 98F29103500000.
This GSE/Tool User Guide must be read in conjunction with the appropriate Aircraft
documentation.
In case of conflicting documents please contact AIRBUS.
Before using or mounting the GSE/Tool, read this GSE/Tool User Guide carefully and
ensure that all content is well understood. Non-compliance with the instructions can
lead to personal injury or material damage and excludes any warranty.
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
B. Icons
N/A
C. Safety precautions
Ensure safe working practices when handling the GSE/Tool.
GSE/Tool shall be used only by an authorized and competent person who fully
understands the content of this user guide.
Always follow the procedures described in this user guide and the related Airbus
maintenance tasks.
D. EC Directives
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
2 GSE/Tool setup
2.1 Before use
x Check that the various parts of the tool are in good condition.
x Check the validity of the last conformity inspection.
x Read the installation instructions given below.
x If applicable, check the firmness of the bearing or mooring points.
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
98 F3500340507
98 F3500340040
Valve/gage assy
Hose
The nitrogen cylinder is not stored in the case, it is taken in the storage place
for that type of consumable.
N/A
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
P/N 98F29103500000
Manufacturer name
Year of construction
GSE/Tool weight
9,5 kg
Unit: kg
GSE/Tool dimensions
(Length x Width x Height) 13000 x 240 x 110 mm
Unit: mm
M.L.
150 bars
Unit: bar
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
Mandatory foot
protection
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
The tool must be used by individuals qualified in aircraft maintenance and trained for
tool manipulation.
A-Training
B-Utilization
x Utilization of the tool only in day light or in a good quality artificial light.
x The operator must be found in a comfortable stable position during the ma-
nipulations.
x To be particularly cautious when manipulating in altitude.
x Before any utilization, the operator must check that the tool components do
not present deformations or cuts.
x Before any utilization, the operator must check that the nuts and bolts are cor-
rectly tighten.
x The tool must be in warranty period.
Tool 98 F12303500 000 can be used only for fill the nitrogen unit of the A340 aircraft
. Servicing and maintenance. Any other use will be considered as incorrect.
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
Hose Lg10m
x Unroll the hose Lg10m taking care to avoid loops that can create one or more
folds.
x Check if the paths of the hoses do not pose any risk of crushing or pinching
who can cause a cut or sectioning of the hose.
x Unscrew the protective cap on the accumulator.
x Check if the valves for pressurizing and purging of the inflation block 98
F29103500 102 are closed.
Hose Lg2.36m
Manometer
Pressuring valve
Purging valve
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
Cord-polyamide
anti-whipping Carabiner
Hose Lg2.36m
Adapter
x Open the nitrogen bottle and control the outlet pressure, adjust if necessary.
x Slowly open the valve set pressure.
x Fill the accumulator following the AMM current procedure.
x Close the valve set pressure and the nitrogen bottle.
x Drain the hose connected to the accumulator by opening the drain valve.
x Disconnect the adapter from the valve of the accumulator.
x Position the protection cap on the accumulator.
x Drain the hose.
x Remove the carabiner.
x Remove the valve/gage assy from the nitrogen bottle.
x Store in the case.
TechRequest documentation.
If necessary contact your Customer Service Director and/or Field Service; they can
provide you with valuable support in the daily use of TechRequest.
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
A. Periodical Test
AIRBUS recommends that following test must be performed every 12 months in
agreement with French legislation:
If the frequency of the tests under load is more stringent in the country where the tool
is used, AIRBUS recommends that the user comply with the frequency given for the
test under load in the country where the tool is used.
C. Maintenance Schedule
N/A
D. Specific maintenance
This tool doesn’t need specific maintenance.
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
4 Handling / Storage
A. Handling
Handling of case
The storage case with or without equipment is handled manually, the nitrogen bottle
is not stored in the case.
Handling of parts
All parts are handled manually.
B. Storage
Before storing, refer to ‘Packing checklist’ (chapter 2.3) in order to verify the
availability of all items which shall be part of the GSE/Tool P/N 98F29103500000.
When not in use, the tool must be stored in the crate provided for this purpose in a
clean place to avoid damage due to the following risks :
x Chemical: oxidization due to humidity resulting from :
x Rain (water falling directly onto the crate).
x Condensation (by variations in the relative humidity of the air due to tempera-
ture variations).
x Mechanical: surface accident, breakage
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
6 End of life
If the GSE/ Tool is out of order, worn or liable to provoke damages, the user shall
ensure that it is scrapped.
WARNING
To be compliant with regulation 2012/19/EC - Do not dispose Electric
and Electronic Equipment waste and collect them separately
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
7 Appendices
Equipment
Mean(s) used for test performing: Proof test performed in the presence of: Function:
___________________________ ________________________________ ______________
P/N:
98F29103500000 GSE/Tool User Guide
ORIGINAL VERSION (ENGLISH LANGUAGE)
8 Glossary
A/C Aircraft
AMM Aircraft Maintenance Manual
E.g. For Example
Fig, Figs Figure, Figures
GSE Ground Support Equipment
Max Maximum
N/A Not Applicable
P/N Part number
M.L. Maximum Limit
REFERENCE TEB_340A3362_F29D12060845
Distribution List
ISSUE 4 DATE 02 May 2017
TEB_340A3362_4
Distribution List
© AIRBUS S.A.S. 2017. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
REFERENCE TEB_340A3362_F29D12060845
Validation Report
ISSUE 4 DATE 02 May 2017
TEB_340A3362_4
Validation Report
AUTHORS AGREEMENT
Name [Siglum] Date
COUASNARD Julien [for SEM] 05 May 2017 Electronically validated
(SOGECLAIR AEROSPACE SAS)
AUTHORIZATION
Name [Siglum] Date
LAROYE PIERRE [SEMSB] 09 May 2017 Electronically validated
© AIRBUS S.A.S. 2017. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.