Professional Documents
Culture Documents
13 01 RebarShapes
13 01 RebarShapes
We have somewhat already did this, but let us make it official. Let us go ahead and add some reinforcing
shapes to our model.
1- Open Revit then the file STRUCTURAL.RVT (Or open any Revit project you are working in).
2- Open the Section 13
3- Select the column and click the Rebar button
4- Notice that a rebar browser appears to the right. This is simply a visual to see the actual rebar
shapes in our model. Notice even that weird rebar shape is stored here:
5- Now focus your attention to the upper left of the Options toolbar. You will see a menu with a
show dialog button. This is the same menu as the browser to the right. The Browse dialog simply
turns on and off the Rebar Shape Browser.
6- Hit Esc.
7- In the Insert tab go to the Load from Library panel.
8- Click the Load Family button
9- Browse to the Structural Rebar Shapes folder. Notice there are all of the types are stored here as
well.