Professional Documents
Culture Documents
Sincerely,
Wendy D’Olive
President
TechLine Manufacturing
www.techlinemfg.com 1-800-395-3369
Experience The TechLine Advantage
Fast Response to Customer Needs
TechLine’s quality products are distributed through selected industrial
distributors who are able to respond to customer requirements in a
professional and timely manner.
Quality Materials
TechLine incorporates quality materials form certified suppliers.
Modern Design
TechLine is the result of continuous research and product development.
TecchLine Advantage
Warranty
TechLine warrants all of its products to be free of defects, and that all
components ordered will properly assemble to corresponding items.
Easy Installation
A wide variety of standard fittings are available for TechLine raceway,
minimizing the need for field fabrication and special tools.
Choice of Materials
TechLine offers a variety of materials and coatings
including: Aluminum, 304SS or 316SS, and a hot dipped galvanized
finish meeting ASTM A123-89.
UL Certification
TechLine cable tray has been tested and is classified by Underwriters
Laboratories. File number E249472.
1-800-395-3369 www.techlinemfg.com
TABLE OF CONTENTS
Perforated Channel and Angle Tray .................................................................................................................3
Angle ...........................................................................................................................................................................4
Channel.......................................................................................................................................................................5
Flatbar .........................................................................................................................................................................6
Fittings .........................................................................................................................................................................7
Angle Splice ................................................................................................................................................................8
Channel Splice ...........................................................................................................................................................9
900 Short Radius Angle Elbows ...............................................................................................................................10
900 Long Radius Angle Elbows ............................................................................................................................... 11
900 Short Radius Channel Elbows ......................................................................................................................... 12
900 Long Radius Channel Elbows .......................................................................................................................... 13
Short and Long Radius Tee .................................................................................................................................... 14
Short and Long Radius Channel Cross .................................................................................................................. 15
Flat Splice, Elbow, Tee and Cross........................................................................................................................... 16
Fasteners.............................................................................................................................................................27-28
Instrument Stands ............................................................................................................................................... 29
Floor Stands - Single, Double, Triple and Multi-Rack...................................................................................... 30-32
Wall Mount Stands .................................................................................................................................................. 33
Vertical and Horizontal Cable Mount Stands ........................................................................................................ 34
Cable Mount Stands and Pipe Mount Stands ....................................................................................................... 35
Vertical and Horizontal Pipe Mount Stands .......................................................................................................... 36
Channel Floor Stands ............................................................................................................................................. 37
Capillary Spool and Mounting Flag ........................................................................................................................ 38
Mounting Hardware ................................................................................................................................................ 39
Tech Mount Modular Stands .............................................................................................................................40-41
Female Pipe and Square Tube Adapter ................................................................................................................. 42
Round and Square Leg U-Bolt Mount Stands ....................................................................................................... 43
Female Adapter and Square Tube Rack Adapter .................................................................................................. 44
Round Threaded Leg Extension, Square Leg and Elbow Module ........................................................................ 45
Custom Instrument Stands and Racks .................................................................................................................. 46
UL Classified:
3 1-800-395-3369 www.techlinemfg.com
Raceway
Angle
Raceway Angle
W D L
Raceway Angle
TLA-2-2- __* __
* 2” 2” 20’
TLA-3-3- __ __ 3” 3” 20’
www.techlinemfg.com 1-800-395-3369 4
Raceway
Channel
Raceway Channel
W D L
Raceway Channel
Upon Request
*
TLC-2-1- __
* __
* 2” 1” 20’
TLC-2-2- __ __ 2” 2” 20’
TLC-4-1- __ __ 4” 1” 20’
TLC-4-2- __ __ 4” 2” 20’
TLC-6-1- __ __ 6” 1” 20’
TLC-6-2- __ __ 6” 2” 20’
5 1-800-395-3369 www.techlinemfg.com
Raceway
Flatbar
Raceway Flatbar
W L
Flatbar
TLF-2- __
* __
* 2” 10’
TLF-3- __ __ 3” 10’
TLF-4- __ __ 4” 10’
TLF-6- __ __ 6” 10’
www.techlinemfg.com 1-800-395-3369 6
Fittings
UL Classified:
7 1-800-395-3369 www.techlinemfg.com
Fittings
Angle Splice
Installation Guideline:
Minimum of four nuts, bolts and washers
per connection. Fasteners sold seperately
W D L
Angle Splice
TLAS-2-2- __ __ 2” 2” 10”
TLAS-3-3- __ __ 3” 3” 10”
www.techlinemfg.com 1-800-395-3369 8
Fittings
Channel Splice
Installation Guideline:
Minimum of four nuts, bolts and washers
per connection. Fasteners sold seperately
W D L
Channel Splice
Channel Splice
*
TLCS-2-1- __
* __
* 2” 1” 10”
TLCS-2-2- __ __ 2” 2” 10”
TLCS-4-1- __ __ 4” 1” 10”
TLCS-4-2- __ __ 4” 2” 10”
TLCS-6-1- __ __ 6” 1” 10”
TLCS-6-2- __ __ 6” 2” 10”
9 1-800-395-3369 www.techlinemfg.com
Fittings
OUTSIDE ELBOW
W D L
* __
TLOE-2-2- __ * 3R 2” 2” 9.5”
TLOE-3-3- __ __ 3R 3” 3” 9.5”
TLAV-2-2- __ __ 3R 2” 2” 9.5”
TLAV-3-3- __ __ 3R 3” 3” 9.5”
INSIDE ELBOW
** Select appropriate suffix for
Material Finishes: TLOE-2-2- AL-3R
AL: Aluminum (12 Gauge Thickness)
SS: 304 Stainless Steel (16 Gauge Thickness)
HDG: Hot Dipped Galvanized, ASTM A-123
(12 Gauge Thickness)
Slotted Holes=5/16”x1 1/4”
Note: Contact factory for additional materials or finishes.
www.techlinemfg.com 1-800-395-3369 10
Fittings
OUTSIDE ELBOW
* __
TLAOE-2-2- __ * 12R 2” 2” 19”
11 1-800-395-3369 www.techlinemfg.com
Fittings
W D L
0
90 Vertical Outside Bend
3” Radius
*
* __3R
TLVO-2-1- __ * 2” 1” 8.5” VERTICAL OUTSIDE
90O Short Radius Channel Elbows
W D L
13 1-800-395-3369 www.techlinemfg.com
Fittings
W D A L
3” Radius Tee
Short & Long Radius Tee
*
TLCT-2-1- __
* __
* 3R 2” 1” 17.25” 9.5”
www.techlinemfg.com 1-800-395-3369 14
Fittings
W D L A
15 1-800-395-3369 www.techlinemfg.com
Fittings
W A L
* __
TLLS- 2-F__ * 3R 2” 6” 6”
Flat Splice
Bonding Plate
TLLS-2- __ __ 2” 6” 6”
TLLS-3- __ __ 3” 7” 7”
TLLS-4- __ __ 4” 8” 8”
TLLS-6- __ __ 6” 10” 10”
TLTS-2- __ __ 2” 6” 10”
TLTS-3- __ __ 3” 7” 11”
TLTS-4- __ __ 4” 8” 12”
TLTS-6- __ __ 6” 10” 14”
FLAT TEE SPLICE FLAT CROSS SPLICE
Flat Cross Splice ** Select appropriate suffix for
Material Finishes: TLFS-2- AL
TLXS-2- __ __ 2” 10” 10”
AL: Aluminum (12 Gauge Thickness)
TLXS-3- __ __ 3” 11” 11” SS: 304 Stainless Steel (16 Gauge Thickness)
TLXS-4- __ __ 4” 12” 12” HDG: Hot Dipped Galvanized, ASTM A-123
TLXS-6- __ __ 6” 14” 14” (12 Gauge Thickness)
Note: Contact factory for additional materials or finishes.
www.techlinemfg.com 1-800-395-3369 16
Tubing Clamps
17
Tubing Clamps
Yoke Clamps
TLY4-2 1/4” 2
TLY4-3 1/4” 2 thru 4
TLY6-2 3/8” 2
TLY6-3 3/8” 2 thru 3 Yoke Clamps
TLY8-2 1/2” 2 316SS Material
100 Clamps per bag
TLY8-3 1/2” 2 thru 4
TLY12-2 3/4” 2
Yoke, Single & Clamps
Note:
TLY6-3 fits 2” Wide Channel and Angle.
TLY4-10 fits 4”-6” Wide Channel.
TLY8-10 fits 6” Wide Channel.
TLG6-1SSN 3/8”
TLG8-1SSN 1/2”
TLG10-1SSN 5/8”
TLG12-1SSN 3/4”
TLG16-1SSN 1”
Duplex Clamps
TLD4-2 1/4”
TLD6-2 3/8”
TLD8-2 1/2” Double Clamps
TLD12-2 3/4” 316SS Material
50 Clamps per bag
TLD16-2 1”
www.techlinemfg.com 1-800-395-3369 18
Tubing Clamps
Gang Clamps
Gang Clamps
TLG4-2SSB 2
TLG4-3SSB 3
TLG4-4SSB 4
TLG4-5SSB 5
TLG4-6SSB 6
TLG4-7SSB 7
TLG4-8SSB 8
TLG4-9SSB 9 Gang Clamps
TLG4-10SSB 10 316SS Material
Gang Clamps
25 Clamps per bag
TLG4-11SSB 11
TLG4-12SSB 12 *NOTE: Fasteners Sold
TLG6-2SSB 2 Seperately
TLG6-3SSB 3
TLG6-4SSB 4
TLG6-5SSB 5
TLG6-6SSB 6 Example: TLG - * - * - SSB
TLG6-7SSB 7
TLG6-8SSB 8 Basic Part:
TLG6-9SSB 9 TechLine Gang Clamp
TLG6-12SSB 12
# of Tubes:
TLG8-2SSB 2 2
3
TLG8-3SSB 3 4
5
TLG8-4SSB 4 6
TLG8-5SSB 5 7
8
TLG8-6SSB 6 9
10
TLG8-7SSB 7 11
TLG8-8SSB 8 12
19 1-800-395-3369 www.techlinemfg.com
Clamps
Bundle Clamps
Bundle Clamps
Bundle Clamps
304SS Material
25 Clamps per bag
Bundle Clamps
www.techlinemfg.com 1-800-395-3369 20
Stauff Clamps
21
Stauff Clamps
❶ TYPE OF
INSTALLATION ❸ MATERIAL & DESIGN
OF CLAMP BODY *1 ❹ MOUNTING & FITTING
COMBINATION ❼ ASSEMBLING &
PACKAGING
no code without mounting plate, PP Polypropylene, profiled inside, DP - AS Cover Plate / no code components supplied
rail adaptor or rail nuts with tension clearance Hexagon Head Bolt separately (standard)
SP PPH Polypropylene, smooth inside, DP - IS Cover Plate /
Single Weld Plate
without tension clearance Socket Cap Screw A assembled (optional)
CRA Channel Rail Adaptor PAH Polyamide, smooth inside, IS Socket Cap Screw
without tension clearance with washer
Tube O.D.
Tube O.D.
Tube O.D.
Bore Pipe
Bore Pipe
Nominal
in inch
Group
Group
in mm
in mm
8 5
/16 108 W4
DIN 0
6
6
5
16 /8 216 102 4 8102L
17,2 3
/8 217,2
18 218
3
19 /4 319
20 320
STAUFF 3
DIN 3
21,3 1
/2 321,3
7
22 /8 322
25 325
25,4 1 325,4
26,9 3
/4 426,9
28 428
4
4
TECHNICAL NOTES
*TECHNICAL
*1 SEE MATERIALNOTES
PROPERTIES ON PAGE C52. OTHER CLAMP BODY MATERIALS
AND COLORS ARE AVAILABLE UPON REQUEST.
2 AVAILABLE FOR STAUFF GROUP 1A TO 6 ONLY. (DIN GROUP 1 TO 6).
*
*3 AVAILABLE FOR STAUFF GROUP 1 TO 6 ONLY. (DIN GROUP 0 TO 6).
*4 NOMINAL BORE, EXCEPT DIN 2448.
*5 NOMINAL BORE, ONLY DIN 2448.
INDIVIDUAL COMBINATIONS OF ALTERNATIVE SURFACE FINISHINGS AND
*6SPECIAL PROPERTY MATERIALS ARE AVAILABLE UPON REQUEST.
www.techlinemfg.com 1-800-395-3369 22
Stauff Clamps
❶ TYPE OF
INSTALLATION *11 ❸ MATERIAL & DESIGN
OF CLAMP BODY *1 ❹ MOUNTING & FITTING
COMBINATION *11 ❼ ASSEMBLING &
PACKAGING
no code without mounting plate, PP Polypropylene, profiled inside, DPAL - AS Single Cover Plate / no code components supplied
rail adaptor or rail nuts with tension clearance Hexagon Head Bolt separately (standard)
SPAL Weld Plate for PPH*2 Polypropylene, smooth inside, DPAS - AS Double Cover Plate /
Single Clamps without tension clearance Hexagon Head Bolt A assembled (optional)
SPAS Weld Plate for PA Polyamide, profiled inside, DPAS - IS Cover Plate /
Double Clamps with tension clearance Socket Cap Screw K packed in kits (optional)
Elongated Weld Plate Polyamide, smooth inside,
SPAL/DUB
for Single Clamps PAH*2 without tension clearance IS *2 Socket Cap Screw
Channel Rail Adaptor SA*10 Santoprene, profiled inside, SIP - AF *4 Safety Locking Plate /
CRA *2 *3 with tension clearance Stacking Bolt
Mounting Rail Nut SAH*10 Santoprene, smooth inside,
GMV *2 without tension clearance
AL Aluminium, profiled inside,
Stauff Components
with tension clearance
Tube O.D.
Tube O.D.
Tube O.D.
Bore Pipe
Bore Pipe
M Metric Thread W1
Nominal
Nominal
in inch
Group
in mm
in mm
Hose
Hose
10 /8
1
3010 48,4 11/4 6048,4 *7 (AISI 304)
STAUFF 3S
DIN 4
12,7 1
/2 3012,7 54,4 11/2 6054,4 *7
W5 less steel A4 - 1.4401/1.4571
13,7 /4
1
3013,7 57,2 21/4 6057,2 (AISI 316/316Ti)
14 3014 60,3 2 6060,3 weld plate phosphated,
15 3015 63,5 21/2 6063,5
W10 all other parts zinc plated
5
16 /8 3016 70 23/4 6070 weld plate and cover
17,1 /8
3
3017,1 70 23/4 7070
W12 plate phosphated, bolts
ST. 7S
DIN 5
22,1 1
/2 4022,1 *7 127 5 8127 zinc plated
7
22,2 /8 4022,2 127 5 9127 rail nut zinc plated, cover
W16
ST. 9S
DIN 7
25,1 5
/8 4025,1 *7 140 5 9140 plate phosphated, bolts
25,4 1 4025,4 152 6 9152 zinc plated
26,7 /4
3
4026,7 168 6 9168 safety locking plate
W17
12S ST. 11S SF. 10S
29,2 3
/4 4029,2 *7 168 6 10168 phosphated, stacking
10 DIN 9 DIN 8
32 1 /41
5032 203 10203 bolts zinc plated
STAUFF 5S
TECHNICAL NOTES
1 SEE MATERIAL PROPERTIES ON PAGE C52. OTHER CLAMP BODY MATERIALS AND COLORS ARE AVAILABLE UPON
*
*TECHNICAL
REQUEST.
NOTES
23 1-800-395-3369 www.techlinemfg.com
Stauff Clamps
212,7 PP SIG-AF U W3
2x Stacking Bolt 2x Hexagon Head Bolt 2x Hexagon Head Bolt
Surface: W3, Zinc Plated Surface: W3, Zinc Plated Surface: W3, Zinc Plated
Thread: UNC Thread: UNC Thread: UNC
1x Safety Locking Plate 1x Cover Plate 1x Cover Plate for Single
Surface: W3, Zinc Plated Surface: W3, Zinc Plated Clamps
1x Clamp (two halves) 1x Clamp (two halves) Surface: W2, phosphated
Material: Polypropylene Material: Polypropylene 1x Clamp (two halves)
Design: profiled inside, Design: profiled inside, Material: Polypropylene
with tension clearance with tension clearance Design: profiled inside,
Group: STAUFF 2 Group: STAUFF 2 with tension clearance
DIN 2 DIN 2 Group: STAUFF 3S / DIN 1
Tube-O.D.12,7 mm Tube-O.D.12,7 mm Tube-O.D. 6 mm / 0.24”
Surface: W3, Zinc Plated 2x Channel Rail Adaptor 1x Weld Plate for Single
Thread: UNC Surface: W3, Zinc Plated Clamps
W3 is standard for W3 is standard for Surface: W2, phosphated
this type of installation. this type of installation. Thread: UNC
W15 (up to Group 7S) or W1
(Group 8S to 12S) are
standards for this type of
installation.
SPAL/DUB 3006 PP DPAL-AS U W15 CRA 3006 PP DPAL AS U W3 3006 PP SIP-AF U W17
2x Hexagon Head Bolt 2x Hexagon Head Bolt 2x Stacking Bolt
Surface: W3, Zinc Plated Surface: W3, Zinc Plated Surface: W3, Zinc Plated
Thread: UNC Thread: UNC Thread: UNC
1x Cover Plate for Single Clamps 1x Cover Plate 1x Safety Locking plate
Surface: W2, phosphated Surface: W3, Zinc Plated Surface: W2, phosphated
1x Clamp (two halves) 1x Clamp (two halves) 1x Clamp (two halves)
Material: Polypropylene Material: Polypropylene Material: Polypropylene
Design: profiled inside, Design: profiled inside, Design: profiled inside,
with tension clearance with tension clearance with tension clearance
Group: STAUFF 3S / DIN 1 Group: STAUFF 3S Group:
r STAUFF 3S / DIN 1
Tube-O.D. 6 mm / 0.24” DIN 2 Tube-O.D. 6 mm / 0.24”
Tu
1x Elongated Weld Plate for Tube-O.D.12,7 mm W1
W17 (up to Group 7S) or
Single Clamps 2x Channel Rail Adaptor W18(Group 8S to 10S)
W1
Surface: W2, phosphated Surface: W3, Zinc Plated are standards for this
Thread: UNC type of installation
typ
W15 (up to Group 7S) or
W1 (Group 8S to 12S) are
standards for this type of
installation.
www.techlinemfg.com 1-800-395-3369 24
Cushon Clamps
Cushion Clamps
(in) (mm) (**=Material Code) B C D E 1 2 3
15,7 5,6 28,2 2
1/4” 6,4 TLC-025-* * 400 50 50
.62 .22 1.11 .08
19,1 7,1 31,5 2
3/8” 8 TLC-037-* * 400 50 50
.75 .28 1.24 .08
22,1 8,6 31,5 2
1/2” 12,7 TLC-050-* * 400 50 50
.87 .28 1.24 .08
33,8 11,4 40,4 2
3/4” 19 TLC-075-* * 600 75 75
1.33 .53 1.78 .08
42,2 16,8 51,6 2,8
1” 25,4 TLC-100-* * 600 75 75
1.66 .66 2.03 .11
25 1-800-395-3369 www.techlinemfg.com
Cushon Clamps
Cushion Clmaps
ORDER CODES
www.techlinemfg.com 1-800-395-3369 26
Fasteners
Finishes:
304 SS
316 SS
Zinc Plated
Aluminum
Variety:
27
Fasteners
Fasteners
ZP25HB2.00 SS25HB2.00
ZP25HB3.00 SS25HB3.00
ZP25HB4.00 SS25HB4.00
1/4” Slotted Cap Screw
ZP25CS.50 SS25CS.50
ZP25CS.75 SS25CS.75
ZP25CS1.00 SS25CS1.00
ZP25CS1.25 SS25CS1.25
ZP25CS1.50 SS25CS1.50
ZP25CS2.00 SS25CS2.00
ZP25CS3.00 SS25CS3.00
ZP25CS4.00 SS25CS4.00
Flat Washers
(1/4”) ZP25FW (1/4”) SS25FW
(5/16”) ZP31FW (5/16”) SS31FW
(3/8”) ZP38FW (3/8”) SS38FW
(1/2”) ZP50FW (1/2”) ZSS50FW
Lock Washers
(1/4”) ZP25LW (1/4”) SS25LW
(5/16”)ZP31LW (5/16”) SS31LW
(3/8”) ZP38LW (3/8”) SS38LW
(1/2”) ZP50LW (1/2”) SS50LW
www.techlinemfg.com 1-800-395-3369 28
Instrument Stands
Metallized/Powder Coat
Aluminum
304 SS
316 SS
Painted
TechLine stands are fabricated from 2” Schedule 40 pipe which utilize a flat
cap design. TechLine offers Hot Dipped Galvanized Carbon Steel meeting
ASTM A123/89 requirements as a standard, but optional coatings are
available upon request. Hot Dipped Galvanized stands come standard with
weep holes and an open base to allow for drainage.
Custom Fabrication:
With our onsite fabrication facility, TechLine can handle any of your custom
requirements.
“Send us your drawing and we will build it.”
29
Instrument Stands
Example: TLIS - 2 - FS - 1 - GV - 54 - 8 - *
Basic Part:
TechLine Instrument Stand
Type of Mount:
Floor Stand (FS)
No. of Columns:
1
Material Finish:
Aluminum (AL)
Galvanized (GV)
Metallized (M)
304SS (4SS)
316SS (6SS)
Heights:
Specify Height in Inches
(Standard is 54”)
Optional Gussets: G
www.techlinemfg.com 1-800-395-3369 30
Instrument Stands
Basic Part:
TechLine Instrument Stand
Type of Mount:
Floor Stand (FS)
No. of Columns:
2
3
*Up to 4 Uprights Per Single Leg
Stand. More, Please Use Dual Leg.
Material Finish:
Aluminum (AL)
Galvanized (GV)
Metallized (M)
304SS (4SS)
316SS (6SS)
Heights:
Specify Height in Inches
(Standard is 54”)
Optional Gussets: G
31 1-800-395-3369 www.techlinemfg.com
Instrument Stands
Type of Mount:
Floor Stand (FS)
No. of Columns:
1
2
3
4
Material Finish:
Aluminum (AL)
Galvanized (GV)
Metallized (M)
304SS (4SS)
316SS (6SS)
Heights:
Specify Height in Inches
(Standard is 54”)
Optional Gussets: G
Double Leg: DL
www.techlinemfg.com 1-800-395-3369 32
Instrument Stands
Basic Part:
TechLine Instrument Stand
Type of Mount:
Wall Mount (WM)
No. of Columns:
1
2
3
Material Finish:
Aluminum (AL)
Galvanized (GV)
Metallized (M)
304SS (4SS)
316SS (6SS)
33 1-800-395-3369 www.techlinemfg.com
Instrument Stands
General Specifications:
Example: TLIS - 2 - VCS - 1 - GV - 18 - 50 - ZP Provides adjustable mounting capabili-
ties on process lines. 2” SCH 40 pipe
welded to 3” extruded channel. The
Basic Part: channel provides the gripping edge on
TechLine Instrument Stand
the process line. Two
high-tensile strength cables 5/16” dia.
Size of Pipe: (2” or 3”)
Wraps around the process line holding
the stand in place. Galvanized cable is
Type of Mount: standard. SS Cable is optional. Cables
Vertical Cable Stand (VCS)
Horizontal Cable Stand (HCS) are available in two lengths, 50” for
process lines 3” to 14” dia. &120”
for process lines 3” to 36” dia. One
No. of Columns:
1 end of cable terminates on the base
bracket in a galvanized wire rope clip.
Material Finish:
The other end has a 5/8” threaded
Aluminum (AL) end which also terminates on the base
Galvanized (GV) bracket. 5/8”- 11 carbon steel zinc
Metallized (M) plated hex nut and SS plated washer
304SS (4SS)
316SS (6SS)
used as a fine adjustment.
Material:
Length:
Specify length in Inches
Galvanized carbon steel is standard.
(Standard is 18”) Aluminum, 304SS, and 316SS materi-
als available upon request.
Cable Length:
50” = 3” to 14” pipe Coating:
120” = 3” to 36” pipe Hot dipped galvanized (meeting ASTM
A 123-89 specification) is our stan-
Cable Material: dard coating. Optional coatings, such
304SS (SS) as metallizing and painting, available
Zinc Plated (ZP) upon request.
www.techlinemfg.com 1-800-395-3369 34
Instrument Stands
Length: Length:
Specify length in Inches Specify length in Inches
(Standard is 18”) (Standard is 18”)
35 1-800-395-3369 www.techlinemfg.com
Instrument Stands
www.techlinemfg.com 1-800-395-3369 36
Instrument Stands
Coating:
Basic Part:
TechLine Instrument Stand
Type of Mount:
Channel Floor Stand (CFS)
No. of Columns:
1
Material Finish:
Aluminum (AL)
Galvanized (GV)
Metallized (M)
304SS (4SS)
316SS (6SS)
Heights:
Specify height in Inches
(Standard is 60”)
37 1-800-395-3369 www.techlinemfg.com
Instrument Stands
CH-8-__ __ TLIS2UFP-__ __
This spool can be mounted horizontally or 1/4” steel plate 6” x 12”. Plate is slotted to accept two
vertically. 2”x1/4” flat bar has two holes drilled to ac- u-bolts that are 3/8” x 2” galvanized steel with two hex
cept a 3/8” x 2” U-Bolt for mounting. nuts.
Material:
Material: Carbon steel is standard. Aluminum, 304SS, and
Carbon steel is standard. Aluminum, 304SS, and 316SS materials available upon request.
316SS materials available upon request.
Coating:
Coating: Hot dipped galvanized (meeting ASTM A 123-89
Hot dipped galvanized (meeting ASTM A 123-89 specification) is our standard coating. Optional
specification) is our standard coating. Optional coatings, such as metallizing and painting,
coatings, such as metallizing and painting, available upon request.
available upon request.
www.techlinemfg.com 1-800-395-3369 38
Instrument Stands
Mounting Hardware
Model GM
This grating fastener
is used to mount
instrument stands
as well as other
devices onto
existing grating
services. Model
GM does not fasten
grating to structural
steel supports.
39 1-800-395-3369 www.techlinemfg.com
Instrument Stands
Tech-Mount Modular
TLIS2AP-8
TLIS2SL-24
TLIS2FA
TLIS2FS1-40-10G
TLIS2FS1-52-10G
Tech-Mount
TLIS2AP3
TLIS2SL-24
TLIS2FA
TLIS2UH-20
TLIS2USL-16
TLIS2AP-8
TechLine can help you configure components needed for a modular instrument support system. Each part shown
is featured in this catalog. Please refer to pages 42-45 for more detailed information and drawings of the indi-
vidual parts shown here.
www.techlinemfg.com 1-800-395-3369 40
Instrument Stands
Tech-Mount Modular
7/,6$3
7/,66/
7/,6)$
7/,66/
7/,6)6*
7/,6)6*
Tech-Mount
7/,6$3
7/,68)3
7/,66/
7/,6)$
7/,6:0
TechLine can help you configure components needed for a modular instrument support system. Each part shown
is featured in this catalog. Please refer to pages 42-45 for more detailed information and drawings of the indi-
vidual parts shown here.
41 1-800-395-3369 www.techlinemfg.com
Instrument Stands
TLIS2AP8__
* __
* TLIS2FA8 __
* __
*
www.techlinemfg.com 1-800-395-3369 42
Instrument Stands
Material:
Carbon steel is standard. Aluminum,
Length: 304SS, and 316SS materials available upon
Specify length in Inches request.
(Standard is 16”)
Coating:
Hot dipped galvanized (meeting ASTM A
U-Bolt Size: 123-89 specification) is our standard coat-
2” thru 12” ing. Optional coatings, such as spray arc
metallizing and painting, available upon
request.
43 1-800-395-3369 www.techlinemfg.com
Instrument Stands
TLIS2FA __
* __
* TLIS2FUS __
* __
*
2-1/2” Female Adapter. 2-1/2” Square Tube Rack Adapter for use with primary
modular instrument stand
• Has 2 1/2” SCH 40 pipe, extension 2” long which
provides a female junction for 2” pipe. This female • This modular stand can be mounted horizontally or
adapter is used with primary modular instrument vertically 1/4” steel plate 5” x 7” with 2 1/2”
stand. 2” SCH 40 pipe 9” long is welded to 2 1/2” square tubing. .188” wall thickness. Plate is
square tubing 3 1/2” long. .188” wall thickness in slotted to accept two U-bolts. 3/8” diameter galva-
carbon steel. Four 5/16” x 1/2” zinc plated hex bolts nized U-bolts, nuts and washers are supplied with each
in square tubing and two in pipe. or mounting.
Material: Material:
Carbon steel is standard. Aluminum, 304SS, and Carbon steel is standard. Aluminum, 304SS, and
316SS materials available upon request. 316SS materials available upon request.
Coating: Coating:
Hot dipped galvanized (meeting ASTM A 123-89 Hot dipped galvanized (meeting ASTM A 123-89
specification) is our standard coating. Optional specification) is our standard coating. Optional
coatings, such as metallizing in and painting, coatings, such as metallizing in and painting,
available upon request. available upon request.
www.techlinemfg.com 1-800-395-3369 44
Instrument Stands
2” pipe, threaded on one end, Square Leg Module Square Elbow Module
16” long. For use with primary
modular instrument stand. • 2” square leg tubing 24” long, • 2” square leg tubing “L”
for use with primary modular shaped, each leg 24” long.
• Fully galvanized inside and instrument stand. Wall thick- For use with primary modular
outside. ness. .188” carbon steel. instrument stand. Wall thick-
• Solid welded cap provided as ness .188” carbon steel.
a standard. Coating:
Hot dipped galvanized (meeting • Solid welded cap provided as
Coating: ASTM A 123-89 specification) is a standard.
Hot dipped galvanized (meeting our standard coating. Optional
ASTM A 123-89 specification) is coatings, such as spray arc met- Coating:
our standard coating. Optional allizing and painting, available Hot dipped galvanized (meeting
coatings, such as spray arc met- upon request. ASTM A 123-89 specification) is
allizing and painting, available our standard coating. Optional
upon request. coatings, such as spray arc met-
allizing and painting, available
upon request.
45 1-800-395-3369 www.techlinemfg.com
Instrument Stands
New to Market
TLISBM __
* __
* -4-6
General Specifications:
Material:
Carbon steel is standard. 304SS, 316SS,
materials available upon request.
Coating:
New To Market
General Specifications:
Material:
Common magerials are carbon steel, 304SS,
316SS and aluminum.
Coating:
Hot dipped galvanized (meeting ASTM
A 123-89 specification) is our standard
coating. Optional coatings, such as spray
arc metallizing and painting, available
upon request.
www.techlinemfg.com 1-800-395-3369 46
Manifold/Condensate Chambers
47 1-800-395-3369 www.techlinemfg.com
Manifolds / Condensate Chambers
ASME Standards
TechLine manufactures our vessels to ASME
standards. If an ASME U or S stamp is re-
quired, please request on quote and we can
provide pricing according to your specific need.
www.techlinemfg.com 1-800-395-3369 48
Manifolds / Condensate Chambers
Condensate Chamber
Example: TLDP - 3 - 12 - CS - XH - F - 8
Basic Part:
TechLine Drip
Material Finish:
Carbon Steel=CS Chrome 22=P22
304 SS=SS Chrome 91=P91
316SS=316SS Hastelloy =HC
Chrome 11=P11 Galvanized=GV
Port Configuration
49 1-800-395-3369 www.techlinemfg.com
Manifolds / Condensate Chambers
Notes:
TechLine Air Headers are
manufactured
in accordance with
customer specifications
allowing for ease of instal-
lation. Offered in various
pipe sizes, schedules
and lengths, the distance
between taps may vary
depending upon customer
specifications. Standard
dimensions are 4-1/2”
apart. Connections are
available in threaded,
socket weld
or flanged.
Air Manifold
Valves:
Two piece 1/2’ threaded
TechLine Ball valves and
1/2” bleed valve.
Material:
Carbon steel is standard.
Aluminum, 304SS, and
316SS materials available
upon request.
www.techlinemfg.com 1-800-395-3369 50
Manifolds / Condensate Chambers
Basic Part:
TechLine Air Manifold
Material:
Carbon Steel (C)
Stainless (S)
Aluminum (A)
Brass (B)
Inlet Connections:
Flanged (F)
Air Manifold
Threaded (T)
Socketweld (S)
Number of Taps:
(4, 5, 6, 7, 8...)
51 1-800-395-3369 www.techlinemfg.com
Custom Chambers & Headers
www.techlinemfg.com 1-800-395-3369 52
Manifolds
Strut Products
53 1-800-395-3369 www.techlinemfg.com
Strut
Single Strut
1000 1315
Single Sturt
W D L W D L
1000 __
* __
* 1 5/8” 1 5/8” 10’ 1315 __
* __
* 1 5/8” 13/16” 10’
www.techlinemfg.com 1-800-395-3369 54
Strut
Double Strut
1001 1002
Double Strut
W D L W D L
1001 __
* __
* 1 5/8” 3-1/4” 10’ 1002 __
* __
* 1 5/8” 3-1/4” 10’
55 1-800-395-3369 www.techlinemfg.com
Strut
SN-25-__
* __
* 1/4” RC375ZP 3/8”
SN-38 3/8”
SN-50 1/2”
www.techlinemfg.com 1-800-395-3369 56
Strut
* __
SW-25- __ * 1/4” AE-25- __
* __
* 1/4”
57 1-800-395-3369 www.techlinemfg.com
Struts
Tap Size
Flat Elbow
FE-50- __
* __
* 1/2”
Flat Tee
FT-50- __
* __
* 1/2”
Easy Installation
Fits all 1 5/8” Channel
Fitting Designed for use with 1/2” bolts
www.techlinemfg.com 1-800-395-3369 58
Struts
RIGID CONDUIT A
* __
RA50 - __ * 1/2” 2”
* __
RA75 - __ * 3/4” 2 1/8”
* __
RA100 - __ * 1” 2 5/8”
* __
RA125 - __ * 1 1/4” 2 7/8”
* __
RA150 - __ * 1 1/2” 3 3/4”
* __
RA200 - __ * 2” 3 7/8” ** Select appropriate suffix for
Material Finishes: RA50 -ZP
* __
RA250 - __ * 2 1/2” 4 5/8”
ZP: Zinc Plated
* __
RA300 - __ * 3” 5 1/4”
SS: 304SS
* __
RA350 - __ * 3 1/2” 5 3/4” 3/8” U-Bolt provided
* __
RA400 - __ * 4” 6 1/4”
59 1-800-395-3369 www.techlinemfg.com
Struts
* ___
PB-158-___ *
www.techlinemfg.com 1-800-395-3369 60
Struts
Strut Clamps
* __
CC50 - __ * 1/2” 400# 100
* __
CC75 - __ * 3/4” 400# 100
* __
CC100 - __ * 1” 400# 100
* __
CC125 - __ * 1-1/4” 600# 100
* __
CC150 - __ * 1-1/2” 600# 50
* __
CC200 - __ * 2” 600# 50
* __
CC250 - __ * 2-1/2” 800# 50
* __
CC300 - __ * 3” 800# 50
Strut Clamps
* __
CC350 - __ * 3-1/2” 1000# 50
* __
CC400 - __ * 4” 1000# 25
* __
TC25 - __ * 1/4” 400# 100
TC38 - __
* __
* 3/8” 400# 100
• Easy Installation
* __
TC50 - __ * 1/2” 400# 100 • Conduit Clamps Fit Both
EMT and Rigid Conduit
* __
TC63 - __ * 5/8” 400# 50
• Tubing Clamps Fit O.D. Tubing
* __
TC75 - __ * 3/4” 400# 50 • Nut and Bolt Included
TC100 - __
* __
* 1” 600# 50 • Zinc Plated Standard
• 304SS Available Upon Request
TC125 - __
* __
* 1-1/4” 600# 25
• 100 Clamps Per Bag
TC138 - __
* __
* 1-3/8” 600# 25
* __
TC150 - __ * 1-1/2” 600# 25
TC175 - __
* __
* 1-3/4” 800# 25
Material Finishes: CC-25-ZP
TC200 - __
* __
* 2” 800# 25
ZP: Zinc Plated
TC250 - __
* __
* 2-1/2” 800# 25
SS: 304SS
TC300 - __
* __
* 3” 800# 1 Easy Installation
Fits all 1 5/8” Channel
TC350 - __
* __
* 3-1/2” 800# 1
TC400 - __
* __
* 4” 800# 1
61 1-800-395-3369 www.techlinemfg.com
62
Product Overview
Snap Track was developed in response to a request for a limited width tray system to
replace wire basket tray in an industrial environment. A major oil company approached
Techline Mfg. requesting a product that would be stronger, provide better cable pro-
tection and reduce installation cost. Snap Track was almost 5 years in the design and
development. After visiting with end users, engineering firms, contractors, installers,
etc., Snap Track was developed with an even expanded focus.
Snap Track is not a traditional ladder type or channel type cable tray but rather a
unique limited width, ventilated bottom channel tray, intended to be used as an alter-
native to conduit, typically 2” and below. The Snap Track system was initially designed
to transition low voltage, control, and instrument cable from ladder tray to point of use
(i.e. instruments and motor control stations) in an industrial environment.
There are many commonly accepted benefits of running channel tray systems in lieu
of conduit Including total installed cost, cable accessibility, and future modifications in
these applications. These benefits coupled with the unique labor and material savings
available through Snap Track have proven to make Snap Track an effective alternative
for not only routing low voltage, control cable, and instrument cable but also service
conductor and power cables.
63
NOTES:
64
March 2015
Terms and Conditions
1. Acceptance (e) Freight for returned goods is the responsibility of the buyer.
(a) Acceptance of orders by Techline Mfg. is based on the following 8. Limited Warranty
terms. These terms supersede all prior correspondence. Additional or different terms must (a) Techline Mfg. warrants to each original Buyer of Products that
be agreed to in writing by Techline mfg. Products are, at the time of delivery to the Buyer, in good working order, free of defects
(b) Techline Mfg. failure to insist on strict performance of any of the in material and workmanship, and conform to Techline Mfg.’s official published
following terms or additional terms agreed to will not constitute a waiver of that or other specifications, provided that no warranty is made with respect to any Products,
terms and will not be considered a breach of contract. component parts, or accessories manufactured by others but supplied by Techline Mfg..
(c) All orders are subject to final acceptance at Techline Mfg.’s primary (b) Techline Mfg.’s obligation under this warranty for any Product
facility, Spanish Fort, Al. proved not to be as warranted within the applicable warranty period is limited to, at
2. Price, Payment Terms, Taxes, and Title its option, replacing the Product, refunding the purchase price of the Product, or
(a) Unless otherwise stated, all pricing is firm for 30 days from the date of using reasonable efforts to repair the Product during normal business hours at any
the quotation and is firm for goods released within 90 days of order acceptance. Quoted authorized service facility of Techline Mfg. All costs of transportation of any Product
prices are valid only for the quantities indicated per item. A service charge of $25.00 will claimed not to be as warranted and of any repaired or replacement Product to or from
be accessed for any order less than $100.00. such service facility shall be borne by Buyer.
(b) All invoices are payable in U S Dollars and are due in Net thirty (30) (c) Techline Mfg. may require the return of any Product claimed not to be
Days after delivery. If Buyer fails to fulfill the terms of payment, Techline Mfg. may as warranted to one of its facilities, transportation prepaid by Buyer, to establish a claim
defer future shipments to the buyer, or at its option, cancel the unshipped portions of the under this warranty. The cost of labor for removing a Product and for installing a repaired
Buyer’s orders. Buyer agrees to pay (i) interest at 12% annum, calculated monthly, on all or replacement Product shall be borne by Buyer. Replacement parts provided under the
past due invoices, (ii) In the event that legal action is required to collect past due terms of this warranty are warranted for the remainder of the warranty period of the
invoices, buyer shall pay all reasonable collection agency costs, attorney fees and court Products in which they are installed to the same extent as if such parts were original
cost incurred by Techline Mfg. components. Warranty services provided under these terms and conditions do not assure
(c) “Sales”, “Use” or similar taxes imposed on the sale or transaction are uninterrupted operations of Products; Techline Mfg. shall not be liable for damages
not included in the quoted price. If applicable, such taxes will be added to the invoice and caused by any delays involving warranty service.
are to be remitted by the buyer. (d) The warranty period for Products is one (1) year from the date of
(d) Until full payment of all obligations of the Buyer for an order, shipment unless otherwise agreed by Techline Mfg. in writing.
Techline Mfg., reserves the title (but not the risk of loss) to all Products furnished under (e) EXCEPT FOR THE EXPRESS WARRANTY SET FORTH
that order. If the Buyer defaults in payment or performance or becomes subject to ABOVE, TECHLINE MFG. PROVIDES PRODUCTS AS-IS AND MAKES NO
insolvency, receivership or bankruptcy proceedings or makes an assignment for the OTHER REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,
benefit of creditors, or without the consent of Techline Mfg. voluntarily or involuntarily STATUTORY OR OTHERWISE, REGARDING THE PRODUCTS, THEIR
sells, transfers, leases or permits any lien or attachment on the Products, Techline Mfg., FITNESS FOR ANY PARTICULAR PURPOSE, THEIR MERCHANTIBILITY,
may treat all amounts then or thereafter owing by Buyer to be immediately due and THEIR QUALITY, THEIR NONINFRINGEMENT, OR OTHERWISE. IN NO
payable and Techline Mfg., at its election Techline Mfg. may repossess Products for EVENT SHALL TECHLINE MFG BE LIABLE FOR THE COST OF
which Buyer has not paid in full. In the event of repossession of Products under this PROCUREMENT AND INSTALLATION OF SUBSTITUTE PRODUCT(S).
section, Buyer agrees that Techline Mfg., may enter the premises where the Products may 9. LIMITATION OF LIABILITY
be located and remove them without notice and without being liable to Buyer for such IN NO EVENT WILL TECHLINE MFG. BE LIABLE FOR ANY SPECIAL
repossession. Buyer will not set off invoiced amounts or any portion thereof against sums DAMAGES, CONSEQUENTIAL DAMAGES, INDIRECT DAMAGES,
that are due or may become due from Techline Mfg., its parents, affiliates, or INCIDENTAL DAMAGES, STATUTORY DAMAGES, EXEMPLARY OR
subsidiaries. Buyer grants Techline Mfg., a security interest in all Products for which title PUNITIVE DAMAGES, LOSS OF PROFITS, LOSS OF REVENUE,
has passed (including all after-acquired Products) that Techline Mfg. sells Buyer and all LIQUIDATED DAMAGES, OR LOSS OF USE, EVEN IF INFORMED OF THE
proceeds of Products (including but not limited to all products in which Products are POSSIBILITY OF SUCH DAMAGES. TECHLINE MFG.’S LIABILITY FOR
incorporated and any funds and products that Buyer receives in exchange for Products). DAMAGES ARISING OUT OF OR RELATED TO A PRODUCT SHALL IN NO
Buyer consents to Techline Mfg. execution of any documents to evidence and perfect this CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT FROM WHICH
security interest, and agrees to execute the same if requested by Techline Mfg. THE CLAIM ARISES. TO THE EXTENT PERMITTED BY APPLICABLE LAW,
3. Shipping, Freight and Packaging THESE LIMITATIONS AND EXCLUSIONS WILL APPLY WHETHER
(a) Techline Mfg. reserves the right to make partial shipments unless TECHLINE MFG’S LIABILITY ARISES OR RESULTS FROM BREACH OF
otherwise specified in writing by the buyer. CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING BUT NOT
(b) Freight charges may not be included in the quotation. Unless, LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, MALICE OR
expressly agreed to by Techline mfg. in writing, all applicable freight charges will be INTENTIONAL CONDUCT), STRICT LIABILITY, BY OPERATION OF LAW,
added to the invoice and are to be remitted by the buyer. OR OTHERWISE.
(c)) Packaging costs may not be included in the quotation. Unless, 10. Changes in Product Design or Manufacture
expressly agreed to by Techline mfg. in writing, all applicable packaging costs will be Techline Mfg. reserves the right to change, discontinue or modify the
added to the invoice and are to be remitted by the buyer. design or construction of any of its products and to substitute Products equal to or
4. Force Majeure superior to those originally specified or purchased.
Techline Mfg., shall not be liable for any failure to perform or delay in 11. Patent Indemnity
performing its obligations resulting directly or indirectly from or contributed to by any In the event any Product is made in accordance with drawings, samples or
acts of God, acts of Buyer or those under Buyer’s control, acts of government or other manufacturing specifications designated by Buyer, Buyer agrees to indemnify, defend,
civil or military authorities, priorities, strikes, or other labor disputes, fires, accidents, and hold Techline Mfg. harmless from any and all damages, costs and expenses
floods, epidemics, war, riot, embargoes, delays in transportation, lack of or inability to (including attorney's fees) relating to any claim arising from or relating to the design,
obtain raw materials, components, labor, fuel or supplies, or other circumstances beyond distribution, manufacture, marketing, sale, or use of the Product or arising from or
Techline Mfg. reasonable control ("Force Majeure Event"). If Techline Mfg. elects, the relating to a claim that such Product furnished to Buyer by Techline Mfg., or the use
time for performance shall be extended by a period of time equal to the time lost because thereof, infringes any claim of any patent, foreign or domestic, and Buyer agrees at its
of any delays caused by reasons of a Force Majeure Event. Should Techline Mfg. be own expense to undertake the defense of any suit against Techline Mfg. brought upon by
prevented from completing Buyer’s order or any part thereof because of any Force such claim or claims.
Majeure Event, then Buyer agrees promptly upon request and upon receipt of invoice 12. Governing Law
therefor, to pay Seller for any Product or Products then completed. These terms and conditions shall be governed by and construed in
4. Delivery and Risk of Loss accordance with the laws of the State of Alabama, without reference to its choice of law
(a) Unless otherwise agreed in writing, all deliveries of Products will be rules. If Buyer is incorporated in the United States, any claim or litigation arising out of
EXW (Incoterms 2000) Techline Mfg. facility. Products will be packed in Techline Mfg. or relating to Products shall be brought exclusively in a court of competent jurisdiction in
standard commercial shipping packages. Baldwin County, Alabama. If Buyer is incorporated outside of the United States, any
(b) Delivery and shipping dates are approximate and represent Techline dispute will be resolved by arbitration in Spanish Fort, Alabama, by three arbitrators and
Mfg. best estimate of the time required to make delivery or shipment. Time is not of the under the International Chamber of Commerce Rules of Arbitration. The language of the
essence with respect to the transactions covered by these terms and conditions, except arbitration will be English. In all cases, Buyer and Seller expressly exclude from
with respect to Buyer’s obligation to make all related payments. Techline Mfg.’s application the United Nations Convention on Contracts for the International Sale of
obligations under these terms and conditions will be dependent upon Techline Mfg.’s Goods.
ability to obtain necessary raw materials and components. 13. Waiver
5. Shortages and Damages No waiver of any portion of these terms and conditions shall be effective
(a) Claims for shortages must be made in writing to Techline Mfg. within unless in writing and signed by an authorized representative of Techline Mfg. Any such
two (2) weeks of receipt of the product or the invoice for the product received, whichever waiver shall be effective only for instance given, and shall not operate as a waiver with
is sooner. respect to any other conditions or obligations under these terms and conditions.
(b) Freight claims, for any damaged incurred in transit, are the 14. Severability
responsibility of the buyer. If any provision of these terms and conditions is determined to be illegal,
6. Cancellation / Liquidation Damages invalid, or unenforceable, the validity and enforceability of the remaining provisions of
Orders accepted by Techline Mfg. may not be cancelled or deliveries these terms and conditions will not be affected. TLM 091313
deferred by the buyer without written consent of Techline Mfg. Techline Mfg., reserves
the right to access liquidation damages for cancellation or other order changes. The
determination of the exact cancellation charges will be based on but not limited to: the
nature of the order, product type, or material. Cancellation charges will not exceed the
following schedule; 1 week – 20%, 2 weeks- 45%, 3Weeks- 90%.
7. Returns
(a) Techline Mfg. will not accept product returns without written prior
approval.
(b) Because of the nature of the product specialty fabricated items (seal
pots, special fittings, air headers etc.) are not returnable.
(c) Returns from project awards in excess of $5,000 will be limited to a
10% overage and must not exceed 10% per line item.
(d) Acceptance of all returns is subject to inspection of goods upon receipt
by Techline Mfg. Material in non-resalable condition will not be credited. Consult factory
for credit amount available for returned goods.
Techline Manufacturing
30516 Sgt. E.I. Boots Thomas Dr. • Spanish Fort, AL 36527
Toll Free: 1-800-395-3369 • Local 251-380-7300 • Fax 251-380-7301
www.techlinemfg.com