You are on page 1of 2

Exactly your chemistry.

Optimized Wood Coatings


with Waxes from Clariant

Additives

Ceridust and Licowax improve


the following properties of wood
coating
> mar- and scratch resistance
> matting
> high slip and lubricity
> anti-blocking
> soft touch, smooth handle
> sandability

Clariant GmbH . Pigments & Additives Division . Additives BU/Waxes BL


P.O. Box 101562 . 86005 Augsburg . Germany
Phone: +49/821/479-2460 . Fax: +49/821/479-2890 . www.pa.clariant.com
Exactly your chemistry.

The listing covers wood coatings additives based on Solventborne Waterborne


polyethylene waxes, amide waxes, ester waxes and PTFE. Systems Systems

Ceridust® 9615 A Micronized, modified high density PE wax for scratch


resistance, matting, anti-blocking, soft touch.
Can help prevent sedimentation of silicas.

Ceridust® 3920 F Micronized, PTFE-modified PE wax which improves scratch,


mar and abrasion resistance and smoothness.
Excellent slip and anti-blocking properties.

Ceridust® 9610 F Micronized PE/PTFE blend for high slip and lubricity,
anti-blocking, abrasion and mar resistance.

Ceridust® 9630 F Similar wax as Ceridust 9610 F but gives higher


lubricity, abrasion resistance and anti-blocking.

Ceridust® 5551 Micronized ester wax for scratch resistance, matting and soft feel.

Ceridust® 3715 Micronized, partially oxydized PE wax for scratch


resistance and matting in waterborne systems.

Ceridust® 3719 Micronized oxydized PE wax to improve scratch


resistance and matting in waterborne systems.

Ceridust® 3620 Micronized high density PE wax for scratch resistance


and matting.

Ceridust® 3910 Micronized amide wax to improve sandability.


Free of heavy metals.

Ceridust® TP 6721 Micronized, modified PP wax for soft touch, matting


and improved scratch resistance.

Ceridust® VP 3831 Micronized, modified high density PE wax to improve


scratch resistance, slip and soft touch.

Licowax® PE 520 Low density PE wax for scratch resistance and matting.

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not
therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing
industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
® = Trademark of Clariant registered in numerous countries.

Clariant GmbH . Pigments & Additives Division . Additives BU/Waxes BL


P.O. Box 101562 . 86005 Augsburg . Germany
Phone: +49/821/479-2460 . Fax: +49/821/479-2890 . www.pa.clariant.com

You might also like