FEATURES & BENEFITS One-part, white, non-curing, thermally conductive compound
• Good thermal conductivity • Low oil bleed APPLICATIONS • Stable at high temperatures • DOWSIL™ TC-5080 Thermal Grease is suitable for use as a thermal interface material for lighting assemblies, telecom equipment, consumer devices, power supplies and power components for transportation. COMPOSITION • Thermally conductive fillers TYPICAL PROPERTIES • Siloxane polymer matrix Specification Writers: These values are not intended for use in preparing specifications. Property Unit Result One part or Two part - One Color - White Viscosity cP 836000 mPa-sec 836000 Pa-sec 836 Extrusion Rate grams/min 1053 Flow Rate (Slump) mm 4.5 Specific Gravity (Uncured) - 2.1 Oil Bleed – 150°C/24hrs % <0.01 Thermal Conductivity btu/hr-ft-°F 0.58 W/mK 1 Dielectric Strength volts/mil 220 kV/mm 8.7 Volume Resistivity ohm*cm 2.9E+15
DESCRIPTION PCB system assemblies are continually
Dow thermally conductive compounds designed to deliver higher performance. are grease like silicone materials, Especially in the area of consumer heavily filled with heat-conductive devices, there is also a continual trend metal oxides. This combination towards smaller, more compact designs. promotes high thermal conductivity, In combination these factors typically low bleed and high-temperature mean that more heat is generated in the stability. The compounds are designed device. Thermal management of PCB to maintain a positive heat sink seal to system assemblies is a primary concern improve heat transfer from the of design engineers. A cooler device electrical device and PCB system allows for more efficient operation and assembly to the heat sink or chassis, better reliability over the life of the thereby increasing the overall device. As such, thermally conductive efficiency of the device. compounds play an integral role here. Thermally conductive materials act as OR FROM YOUR DOW SALES TO THE FULLEST EXTENT a thermal “bridge” to remove heat APPLICATION ENGINEER, OR PERMITTED BY APPLICABLE from a heat source (device) to the DISTRIBUTOR, OR BY CALLING LAW, DOW SPECIFICALLY ambient via a heat transfer media (i.e. DOW CUSTOMER SERVICE. DISCLAIMS ANY OTHER heat sink). These materials have EXPRESS OR IMPLIED properties such as low thermal LIMITATIONS WARRANTY OF FITNESS FOR A resistance, high thermal conductivity, This product is neither tested nor PARTICULAR PURPOSE OR and can achieve thin Bond Line represented as suitable for medical or MERCHANTABILITY. Thicknesses (BLTs) which can help pharmaceutical uses. to improve the transfer of heat away DOW DISCLAIMS LIABILITY from the device. FOR ANY INCIDENTAL OR HEALTH AND CONSEQUENTIAL DAMAGES. ENVIRONMENTAL APPLICATION METHODS • Screen print INFORMATION HOW CAN WE HELP YOU To support customers in their product • Stencil print TODAY? safety needs, Dow has an extensive • Needle dispense Tell us about your performance, Product Stewardship organization and a team of product safety and design, and manufacturing challenges. SOLVENT EXPOSURE regulatory compliance specialists Let us put our silicon-based materials In general, the product is resistance to available in each area. expertise, application knowledge, and minimal or intermittent solvent processing experience to work for exposure, however best practice is to you. For further information, please see our avoid solvent exposure altogether. website, www.consumer.dow.com or For more information about our consult your local Dow representative. USABLE LIFE AND materials and capabilities, visit www.consumer.dow.com. STORAGE LIMITED WARRANTY The product should be stored in its INFORMATION – PLEASE To discuss how we could work original packaging with the cover READ CAREFULLY together to meet your specific needs, tightly attached to avoid any go to www.consumer.dow.com for a The information contained herein is contamination. Store in accordance contact close to your location. Dow offered in good faith and is believed to with any special instructions listed on has customer service teams, science be accurate. However, because the product label. The product should and technology centers, application conditions and methods of use of our be used by the indicated Exp. Date support teams, sales offices, and products are beyond our control, this found on the label. manufacturing sites around the globe. information should not be used in substitution for customer’s tests to HANDLING ensure that our products are safe, www.consumer.dow.com PRECAUTIONS effective, and fully satisfactory for the PRODUCT SAFETY intended end use. Suggestions of use INFORMATION REQUIRED FOR shall not be taken as inducements to SAFE USE IS NOT INCLUDED IN infringe any patent. THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT Dow’s sole warranty is that our AND SAFETY DATA SHEETS products will meet the sales AND CONTAINER LABELS FOR specifications in effect at the time of SAFE USE, PHYSICAL AND shipment. HEALTH HAZARD INFORMATION. THE SAFETY Your exclusive remedy for breach of DATA SHEET IS AVAILABLE ON such warranty is limited to refund of THE DOW WEBSITE AT purchase price or replacement of any WWW.CONSUMER.DOW.COM, product shown to be other than as warranted.