1. Check pump house logbook for previous shift remarks.
2. Ensure that cooling water pump is on and is creating minimum water pressure of 3.0 Kg /Cm2. 3. Check the Oil Level of each Vapor Compressors in the Oil level indicator and ensure that oil level is more than the minimum mark and there is no froth. 4. Drain liquid LPG, if any from the suction line through the bottom drain provided in knock out drum / suction bottle, following water draining procedure of bulk vessels. 5. Open the suction and delivery valves fully. 6. Ensure that the valves of vapor compressor are in “unload” position. 7. Switch on the LPG compressor. 8. Keep the valves of compressor in load condition either locally near the valve assembly of the compressor or at control panel, as per the provisions available. 9. Record all parameters like current, suction pressure, discharge pressure, discharge temperature, oil pressure, oil level, etc., in LPG PH logbook. 10. Monitor compressor operation continuously. 11. Stop the compressor and inform floor / shed officer immediately on noticing any abnormal sound, vibration, LPG leaks etc. 12. At the end of operation switch off the compressor and close all valves. 13. LPG PH Logbook to be reviewed, signed with date & sign and corrective actions taken also be logged shift wise by Maintenance / Safety / Floor officer. Review of LPG PH logbook to be done by LIC on daily basis.