Professional Documents
Culture Documents
Op nbr 520-005
Tools:
88830539 Measuring instrument
2. Press and hold in key 8 (service) on the keypad for approx. 4 seconds. When asked if you want to enter Service mode ,
press SELECT.
Information
Enter Service mode
No Yes
6. Read off the brake pressure on the display to check the value for max. output brake pressure. Check the value in Brake
system, specifications.
7. If the value is not correct, connect the pressure sensor on the pressure check connection, see figure, to get a more exact
value.
Figure 1
8. Check the pressure again, but read off the pressure on the pressure gauge.
9. Break the seal and loosen the lock nut on the adjusting screw, see figure.
11. Lock the adjusting screw with the lock nut and affix a new seal.