Professional Documents
Culture Documents
Part Load Points: Page 1/4
Part Load Points: Page 1/4
Point Speed Torque Efficiency Motor loss Drive loss Relative Loss Absolute Loss
Page 1/4
11 90 % 50 % 98.1 % 8W 247 W 0.85 % 256 W
Page 2/4
Efficiency Summary
Motor
Designation: 225 RP4
Manufacturer: NORD
(for detailed efficiency information, contact motor manufacturer)
Drive
Series: VLT® HVAC Drive FC 102
Type code: FC-102P30KT2E20H2
Motor efficiency
The motor efficiency for direct on-line (DOL) motors is
calculated as defined in IEC 60034-30-1. The IE
classification for motors is defined in the operating point
at 100% speed and 100% torque.
Page 3/4
DRIVE DATA
Rated power 30 kW
Nominal frequency 50 Hz
MOTOR DATA
Manufacturer NORD
Technology IM
Nominal frequency 60 Hz
Poles 4
Motor part load efficiency based on standardized part load efficiency points
The compilation of information in this certificate (the "Information") relies upon the accuracy of the data entered by the user of MyDrive® ecoSmart™ and of the actual operating
and environmental conditions. Thus, the Information can be used as a guide for energy efficiency of a drive system only. The Information cannot substitute technical advice, are
not promises for energy savings and should not be relied on as accurate data or analyses. The Information is provided “AS IS” without warranty of any kind and does not
constitute a guarantee that the information is complete, current, or correct, and Danfoss accepts no responsibility for unsuitable or inaccurate material that may be
encountered. The use of this report does not relieve the user of any obligation or duty that might arise under any legislation covering the activities to which this document has
been or is to be applied.