Ww KOLON PLASTICS, INC.
Product Information
Standard Grade
KOCETAL"
ROCETAL”cefets to palaces ess of a copolymer type ne isa material of an excelent quality wth Festures of
esealent anti sreton/antinear, chemical resetnee heactesttng sabi, precee dimensions and molding
abies Irs maint apled in gear o ole, andi used for various purposes aver the flds of a offce
quioment ane ing materials ollning POM Srend same: meds 6y our ndepesdenttecniclouy development
Kalon Plates has developed low- VOCs (volsle KOCETAL) product that are organ chemial POM resin of the
world-best quality almost no emission during the process of formaldehyde that is harmful to human body:
forthe fs te in Korea
KOCETAL’ K300
KOCETAL" K300 is a general injection moldings grade with a good mechanical properties for wide range.
it Cag Value
| l
Specific Gravity 1SO 1183 g/em 141
Melt Index (190°C, 2.16kg) Iso 1133 g/10min 90
Shrinkage Flow/Transverse] ISO 294 % 2.29/2.22
Water Absorption 23°C,H,0, 24h 1SO 62 % 0.59
Tensile Strength 23°C] 180 527-1/2 MPa 65
Tensile Elongation 23°C] 180 527-1/2 % 35
Flexural Strength 23°C] 1sO 178 MPa 85
Flexural Modulus 23°C] ISO 178 MPa 2,700,
Notched Charpy Impact Strength 23°C] ISO 179/1eA kum? 70
Rockwell Hardness 1sO 2039-2 M scale 93
Melting Point ISO 1357-1 °C 166
Heat Deflection Temperature Iso 75
18 MPa C 95
Flammability(0.8mm) uLo4 HB:
W KOLON PLASTICS, INC.
10F, an annex to Kolon Tower 13, Kolon-ro, Gwacheon-si, Gyeonggi-do, Republic of Korea rsisse9WW KOLON PLASTICS, INC.
Dielectric strength eC 60243 kvm 19
Volume Resistivity TEC 60093 cm 1x 10"
Surface Resistivity eC 60093 Q 1x 10"
rocessing Guide (Injection Molding)
wa __
HL a Mol
HI He H3 Ha
Cylinder Temperaturet‘C) 180 190 190 200
Mold Temperature(’C) 60-80
Limitation of Processing Temp. (°C) 220
Pre-drying 80~90°C, 3 hrs
‘The above-mentioned data was measured by Kolon Plastics, inc, under certain conitions and environment. Therefore, it can not be
compared withthe data measured under diferent conditions and environment. And not guaranteed and no warranty father
Aadaitives and pigments are used on this product, The above data cannot be applied. The data can not be used asthe evidence of
legal proceedings.
Contact
W KOLON PLASTICS, INC.
7
110F, an annex to Kolon Tower 13, Kolon-ro, Gwacheon-si, Gyeonggi-do, Republic of Korea 1318849