CONDAMATIC III
AUTOMATIC TRANSMISSION FLUID
APPLICATIONS KKEEYY FFEEAATTUURREESS ::
"CONDAMATIC III" is a fluid for automatic gear boxes,
servo-transmissions and hydrostatic transmissions fitted on most
vehicles.
"CONDAMATIC III" also acts as an excellent hydraulic fluid
and it surpasses the performance of most top quality anti wear High versatility
hydraulic.
"CONDAMATIC III" can be used in automatic transmissions Excellent lubrication performances
when the fluid must be in accordance to the former specifications
TASA, DEXRON ® -III G, IIE or –II were recommended. Ensures a large increase in the life time of
machine parts.
ADVANTAGES
"CONDAMATIC III" is designed to deliver outstanding Thanks to its important viscosity index "CONDAMATIC III"
resistance to oxidation and thermal breakdown as well as has a wide operating temperature range.
exceptional low temperature fluidity.
"CONDAMATIC III" allows : "CONDAMATIC III" is a very anti wear and extreme pressure
Extremely long service life under the most severe operating fluid to provide the lubrication of gears and rings with an excellent
conditions, safety rate.
Increasing service life of gear boxes ,
Saving fuel thanks to low thickening of oil in service, "CONDAMATIC III" contains friction modifier to :
Easy starting down to -36°C, allow changing gear without chocks,
A wear decreasing, prevent vibrations,
Better changing gear in cold weather, increase the life of clutches.
CHARACTERISTICS
Characteristics CONDAMATIC III
units
Nature Mineral
Colour Red
Specific gravity 0.868
Viscosity at 40°C mm²/s 36.9
Viscosity at 100°C mm²/s 7.6
Viscosity at - 40°C mPa.s 19500
Viscosity index 181
Flash point OV °C 200
Pour point °C - 45
Details above are about average production and are not specifications
PERFORMANCE LEVELS
GM DEXRON- IIIG ALLISON C4
MERCON VOITH H55.6335.xx
MERCEDES BENZ 236.5 – 236-9 VOLVO 97341 (in progress)
MAN 339 TYPE V1, Z1 ZF TE-ML 14A
Fp_EN_CondamaticIII_ABo_0511_4