Professional Documents
Culture Documents
GENERAL INFORMATION The HSC Series is calibrated over the temperature range of 0 °C
Honeywell’s TruStability® High Accuracy Silicon Ceramic (HSC) to 50 °C [32 °F to 122 °F] while the SSC Series is calibrated over
Series and Standard Accuracy Silicon Ceramic (SSC) Series are the temperature range of -20 °C to 85 °C [-4 °F to 185 °F].
piezoresistive silicon pressure sensors offering a digital or analog
The TruStability® pressure sensors are intended for use with
output for reading pressure over the specified full scale pressure
non-corrosive, non-ionic gases, such as air and other dry gases.
span and temperature range.
An available option extends the performance of these sensors to
non-corrosive, non-ionic liquids for pressure ranges above
These sensors measure absolute, gage, or differential pressures.
40 mbar | 4 kPa | 20 inH20.
The absolute versions have an internal vacuum reference and an
output value proportional to absolute pressure. Gage versions CLEANING
are referenced to atmospheric pressure and provide an output
proportional to pressure variations from atmosphere. Differential CAUTION
versions allow measurement of pressure between the two IMPROPER CLEANING
pressure ports. Avoid cleaning the sensor; however, if it must be cleaned
ensure cleaning fluids, such as appropriate alcohols
or fluorinated solvents, are used based on the type of
CAUTION contaminants to be removed. Do not immerse the sensor.
PRODUCT DAMAGE FOR SENSORS WITH LIQUID MEDIA
Failure to comply with these instructions may result in
OPTION (ONLY AVAILABLE 60 MBAR | 6 KPA | 1 PSI AND
ABOVE) product damage.
0,25
5,44 [0.010] 10,0
[0.214] [0.39]
8 7 6 5
6,99 13,3
PORT 1 PORT 2 [0.53]
[0.275]
PIN 1
INDICATOR
1 2 3 4
9,24
2,54 TYP. [0.364]
[0.100] 10,85
[0.427]
8X 0,46
[0.018]
PIN 1 PORT 1
INDICATOR
1 2 3 4 9,24
2,54 TYP. [0.364]
[0.100] 11,21
[0.441]
8X 0,46
[0.018]
6,99 13,3
PORT 2 [0.275 ] [0.53]
PORT 1
PIN 1
INDICATOR 2,47
[0.097]
1 2 3 4
2, 54 TYP. 9,24
[0.100] [0.364]
11,21
[0.441]
6,95
[0.274]
1,00
[0.039]
8X 0,46
[0.018]
4,2
13,3 [0.17]
[0.53]
PORT 1 PORT 2 6,99
[0.275]
1,93
[0.076]
1 2 3 4
9,24
2,54 TYP. [0.364]
[0.100] 11,21
[0.441]
8X 0,46
[0.018]
4,65
[0.183]
1 2 3 4
9,24
2,54 TYP. [0.364]
[0.100]
11,21
[0.441]
3,78
[0.149]
8X 0,46
[0.018]
PORT 2 PORT 1
9,24
1 2 3 4 [0.364]
2,54 TYP.
[0.100] 11,21
[0.441]
3,78
[0.149]
8X 0,46
[0.018]
1 2 3 4 9,24 0,25
[0.364] [0.010]
11,92
[0.469]
6,70
[0.264]
8 X 0,461
[0.018]
1,94
[0.076]
8 X 0,46
[0.018]
5,44 10,0
[0.214] [0.39]
8 7 6 5
6,99 13,3
[0.53]
PORT 1 PORT 2 [0.275]
PIN 1
INDICATOR
1 2 3 4
4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100] 6,41
[0.252]
13,75
[0.541] 10,0
[0.39]
8 7 6 5 7,95
[0.313]
13,3
4,93 DIA. 6,99 [0.53]
[0.194] PORT 2 [0.275]
PIN 1 PORT 1
INDICATOR
1 2 3 4 4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100] 6,77
[0.266]
13,75
[0.541] 10,0
5,80
[0.228] [0.394]
8 7 6 5
13,3
6,99 [0.53]
PORT 2 [0.275]
PORT 1
PIN 1
2,47 DIA.
INDICATOR [0.097]
1 2 3 4 4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100] 6,77
[0.266]
5,80 10,0
[0.228] [0.39]
8 7 6 5
4,2
13,3 [0.17]
[0.53]
6,99
PORT 1 PORT 1 PORT 2 [0.275]
1,93 DIA.
[0.076]
1 2 3 4
4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100]
6,77
[0.266]
6,16 10,0
4,0 [0.242] [0.39]
8 7 6 5
[0.16] 2X 1,93 DIA.
PORT 1 13,3 [0.076]
[0.53]
6,99
PORT 2 PORT 1 PORT 2 [0.275]
4,6
[0.18]
1 2 3 4
4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100]
6,77
[0.266]
3,78
[0.149]
1 2 3 4 4,80 8X 0,46
2,54 TYP. [0.189] [0.018]
[0.100] 6,77
3,78
[0.149] [0.266]
6,51 9,91
[0.256] [0.390]
6,75 3,28 2,21 9,40 1,87
[0.266] 8 [0.129] [0.087] [0.370] [0.074]
7 6 5
2,34 4,15
[0.092] PORT 1 13,3 [0.163]
PORT 1 [0.53] 6,98
7,00
PORT 2 [0.276] [0.275]
1 2 3 4 4,80 8 X 1,28
2,54 8 X 0,461
[0.189] [0.018] [0.050]
[0.100] 7,48
[0.294]
5,38
[0.212]
5,38
[0.212]
10,0 4,87
[0.39] [0.192]
15,2
[0.60]
1 2 3 4
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
2X 4.93 DIA.
[0.194]
15,2
[0.60]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
10,0 13,75
[0.39] [0.541]
4.93 DIA.
[0.194]
15,2
[0.60]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
10,0 PORT 2
[0.39]
PORT 1
2,47 DIA.
[0.097]
15,2
[0.60]
1 2 3 4
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
17,78
[0.700]
PORT 2 PORT 1
2X 3.94 DIA.
[0.155] 2X 4,78 DIA.
[0.188]
20,16
[0.794]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
17,78
[0.700]
3257 3257
20,16
[0.794]
0,25 2,54 TYP.
4X 0,51 [0.010] [0.100]
[0.020]
19,06
[0.750]
PORT 2 PORT 1
2X 3,94 DIA.
[0.155] 4.78 DIA .
[0.188]
10,63
[0.418]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
2X 4,80 DIA.
[0.189]
PORT 2 22,87
[0.900]
2X 3.50 DIA.
[0.138] PORT 1
13
[0.52]
0,25
4X 0,51 [0.010]
[0.020] 2,54 TYP.
[0.100]
10,0
[0.39] 5,80
[0.228]
PORT 1 PORT 1
10,0
[0.39] PORT 2 1,92 DIA.
[0.076]
15,2
[0.60]
1 2 3 4
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
10,0 6,16
[0.39] [0.243]
PORT 1 PORT 1
10,0
PORT 2 [0.39] PORT 2 2X 1,92 DIA.
[0.076]
15,2
[0.60]
1 2 3 4
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
2X 4.93 DIA.
[0.194]
15,2
[0.60]
1 2 3 4
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
25,0
[0.98]
15,20
[0.598]
1 2 3 4
1,14 2,1
[0.045] 4 X 0,51 2,54 TYP.
[0.08] [0.100]
[0.020]
1 2 3 4
1,14 2,1
[0.045] 4X 0,51 2,54 TYP.
[0.08] [0.100]
[0.020]
28,96
[1.140]
11,27
[0.444]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
28,96
[1.140]
PORT 2
2X 3,94 DIA.
[0.155]
11,27
[0.444]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
5,36
PORT 2 [0.211] PORT 1
15,24 .DIA
[0.600]
12,5
[0.49]
0,25
4X 0,51 [0.010] 2,54 TYP.
[0.020] [0.100]
13,11
[0.516]
15,6
[0.61]
1 2 3 4
For example, HSCDNNN150PGAA3 defines an HSC Series TruStability® Pressure Sensor, DIP package, NN pressure port, no
special options,150 psi gage pressure range, analog output type, 10% to 90% of Vsupply transfer function, 3.3 Vdc supply voltage.
For example, SSCDNNN150PGAA3 defines an SSC Series TruStability® Pressure Sensor, DIP package, NN pressure port, no
special options,150 psi gage pressure range, analog output type, 10% to 90% of Vsupply transfer function, 3.3 Vdc supply voltage.
NN 2 I C, Address 0x28
2
6 I2C, Address 0x68
No ports NN No ports NN No ports
3 I C, Address 0x38
2
7 I2C, Address 0x78
Pressure Range 3, 4
Dual axial
AA barbed ports, ±1.6 mbar to ±10 bar ±160 Pa to ±1 MPa ±0.5 inH2O to ±150 psi
opposite sides Absolute Absolute Absolute
001BA 0 bar to 1 bar 100KA 0 kPa to 100 kPa 015PA 0 psi to 15 psi
Single axial Single axial
AN barbed port AN Single axial
barbed port AN barbed port
1.6BA 0 bar to 1.6 bar 160KA 0 kPa to 160 kPa 030PA 0 psi to 30 psi
2.5BA 0 bar to 2.5 bar 250KA 0 kPa to 250 kPa 060PA 0 psi to 60 psi
Single axial
004BA 0 bar to 4 bar 400KA 0 kPa to 400 kPa 100PA 0 psi to 100 psi
Single axial Single axial
LN barbless port LN barbless port LN barbless port 006BA 0 bar to 6 bar 600KA 0 kPa to 600 kPa 150PA 0 psi to 150 psi
010BA 0 bar to 10 bar 001GA 0 kPa to 1 MPa
Fastener
mount, dual
FF axial barbed
ports, opposite
Differential Differential Differential
sides 1.6MD ±1.6 mbar 160LD ±160 Pa 0.5ND ±0.5 inH2O
Fastener 2.5MD ±2.5 mbar 250LD ±250 Pa 001ND ±1 inH2O
mount, single
FN axial barbed 004MD ±4 mbar 400LD ±400 Pa 002ND ±2 inH2O
port
006MD ±6 mbar 600LD ±600 Pa 004ND ±4 inH2O
Ribbed
fastener mount, 010MD ±10 mbar 001KD ±1 kPa 005ND ±5 inH2O
GN single axial
barbed port008B 016MD ±16 mbar 1.6KD ±1.6 kPa 010ND ±10 inH2O
025MD ±25 mbar 2.5KD ±2.5 kPa 020ND ±20 inH2O
Fastener
NB mount, dual 040MD ±40 mbar 004KD ±4 kPa 030ND ±30 inH2O
axial ports,
same side 060MD ±60 mbar 006KD ±6 kPa 001PD ±1 psi
100MD ±100 mbar 010KD ±10 kPa 005PD ±5 psi
Single radial Single radial
RN Single radial
barbed port
RN barbed port RN barbed port 160MD ±160 mbar 016KD ±16 kPa 015PD ±15 psi
250MD ±250 mbar 025KD ±25 kPa 030PD ±30 psi
Dual radial Dual radial Dual radial 400MD ±400 mbar 040KD ±40 kPa 060PD ±60 psi
RR barbed ports,
same side
RR barbed ports,
same side
RR barbed ports,
same side 600MD ±600 mbar 060KD ±60 kPa
001BD ±1 bar 100KD ±100 kPa
Dual radial Dual radial Dual radial 1.6BD ±1.6 bar 160KD ±160 kPa
DR barbed ports,
opposite sides
DR barbed ports,
opposite sides
DR barbed ports,
opposite sides 2.5BD ±2.5 bar 250KD ±250 kPa
004BD ±4 bar 400KD ±400 kPa
Single radial Single radial
JN barbless port JN barbless port JN Single radial
barbless port Gage Gage Gage
2.5MG 0 mbar to 2.5 mbar 250LG 0 Pa to 250 Pa 001NG 0 inH2O to 1 inH2O
Dual radial Dual radial Dual radial 004MG 0 mbar to 4 mbar 400LG 0 Pa to 400 Pa 002NG 0 inH2O to 2 inH2O
JJ barbless ports,
same side
JJ barbless ports,
same side
JJ barbless ports,
same side 006MG 0 mbar to 6 mbar 600LG 0 Pa to 600 Pa 004NG 0 inH2O to 4 inH2O
010MG 0 mbar to 10 mbar 001KG 0 kPa to 1 kPa 005NG 0 inH2O to 5 inH2O
Fastener
mount, dual 016MG 0 mbar to 16 mbar 1.6KG 0 kPa to 1.6 kPa 010NG 0 inH2O to 10 inH2O
HH radial barbed
ports, same
side 025MG 0 mbar to 25 mbar 2.5KG 0 kPa to 2.5 kPa 020NG 0 inH2O to 20 inH2O
Fastener 040MG 0 mbar to 40 mbar 004KG 0 kPa to 4 kPa 030NG 0 inH2O to 30 inH2O
mount, single
HN radial barbed 060MG 0 mbar to 60 mbar 006KG 0 kPa to 6 kPa 001PG 0 psi to 1 psi
port 100MG 0 mbar to 100 mbar 010KG 0 kPa to 10 kPa 005PG 0 psi to 5 psi
Manifold 160MG 0 mbar to 160 mbar 016KG 0 kPa to 16 kPa 015PG 0 psi to 15 psi
MN mount, outer
diameter seal 250MG 0 mbar to 250 mbar 025KG 0 kPa to 25 kPa 030PG 0 psi to 30 psi
400MG 0 bar to 400 mbar 040KG 0 kPa to 40 kPa 060PG 0 psi to 60 psi
Manifold 600MG 0 bar to 600 mbar 060KG 0 kPa to 60 kPa 100PG 0 psi to 100 psi
SN mount, inner
diameter seal 001BG 0 bar to 1 bar 100KG 0 kPa to 100 kPa 150PG 0 psi to 150 psi
1.6BG 0 bar to 1.6 bar 160KG 0 kPa to 160 kPa
Options5, 6 2.5BG 0 bar to 2.5 bar 250KG 0 kPa to 250 kPa
004BG 0 bar to 4 bar 400KG 0 kPa to 400 kPa
N Dry gases only, no diagnostics
006BG 0 bar to 6 bar 600KG 0 kPa to 600 kPa
D Dry gases only, diagnostics on
010BG 0 bar to 10 bar 001GG 0 kPa to 1 MPa
T Liquid media on Port 1, no diagnostics
V Liquid media on Port 1, diagnostics on
1
The transfer function limits define the output of the sensor at a given pressure input. By specifying Pmin. and Pmax., the output at Pmin. and Pmax., the complete transfer function Of the
sensor is defined. See the graphical representations of the transfer function in the product datasheet, FIgure 2. For other available transfer functions contact Honeywell Customer Service.
2
SPI output function is not avilable in SIP package.
3
Custom pressure ranges are available. Contact Honeywell Customer Service for more information.
4
See the explanation of sensor pressure types in the product datasheet, Table 4.
5
See the CAUTION in this document.
6
Options T and V are only available on pressure ranges ±60 mbar to ±10 bar | ±6 kPa to ±1 MPa | ±1 psi to ±150 psi.