Professional Documents
Culture Documents
ROCK DRILL
DRILLING BOLTING
1427 1427
1427
16
22
21
BOOM
8 21 8 8
CARRIER
AIR AIR
L CT7 L CT7 S L CT7
S 0 15 0 15
CT1 CT2 1414 CT1 CT2 CT1 CT2
1414
SC SC SG SC
CT5.1 CT5.1 D DG D
D CENTRAL OILER CENTRAL OILER
Y277 Y277
PC PC PG PC
CT6.1 CT6.1 CT5
CT8 CT8 1411
P T P T P
1411
4
192
SLU SLU
142
12
ONLY WITH H200
AND RD314 DRIFTERS WATER
SEPARATOR
12 OUT IN 12
FROM THE AIR COMPRESSOR (1100)
1416 1412
141 DRAIN 140
143 Y129
M PRESSURE REDUCER SHOULD BE ADJUSTED TO GET : CAUTION : Hose 140 must be at least 5000 mm
-> 2.5 bar AT THE DRIFTER PORT IF H200 long for an efficient water separation
-> 4 bar AT THE DRIFTER PORT IF RD314 1425
1413
S421
2,5 bar
Updated Change
Date Was before Pcs. Rev.
by not. Date
NOTICE! This document is the exclusive DATE NAME 311 RANGE 1 / 1
SANDVIK property of Sandvik and it must be
returned on request. The document must DRAWN BY 2009-11-25 SR Hydraulic diagrams
SHEET
not be copied, reproduced, disclosed to
any third party or used in manufacture
LUBRICATION CIRCUIT DWG NR 1-77018868-D
CHECKED 2009-11-25 PME
of subject matter thereof without the
Copyright © Sandvik Mining and Construction Hydrau Lyon
prior written consent of Sandvik. APPROVED 2009-11-25 AG POSITION ID-CODE 77018868