Professional Documents
Culture Documents
21/22
Bearings Power Transmission General Industrial Fluid Power Industrial Hose Tools
Pricing
Applied® catalog list price is available on Applied.com. Prices in effect at time of shipment of
Click & Chat materials or performance of services shall prevail. All prices quoted by Applied ® are subject to
Applied.com correction or change without notice. Please refer to our Standard Terms and Conditions of Sale
at the back of this catalog for additional information.
Applied Industrial Technologies
sells products for INDUSTRIAL or
COMMERCIAL use only. Technologies
Applied Industrial sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
WARNING cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Certain products can expose you to chemicals which are known to the Please see on-product warning for specific information.
ate of California to cause cancer and birth defects or reproductive harm.
For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
ADVERTENCIA
Ciertos productos pueden exponerlo a sustancias químicas reconocidas
por el estado de California como sustancias que pueden provocar cáncer
y defectos de nacimiento o daños reproductivos. Para obtener más
información visite: www.P65Warnings.ca.gov.
Consulte la advertencia en el producto para
Connect with us
Connect with us:
Hand, Power
& Analytical Tools 1
Trusted Brands
Safety
2
Products
Lubrication Products
3
& Equipment
Industrial Chemicals
4
& Coatings
Janitorial
5
Products
General
Industrial 6
Products
Bearings 7
Power
8
and many more! Transmission
Helpful Symbols
Pneumatic
9
Products
I
®
ECOLOGO® Green Seal® Meets NEMA Products that New to Delivery Delivery No air
certified certified Premium® contain eco-friendly this year’s via UPS® via truck shipping
Hydraulic
efficiency attributes, catalog 10
standards according to the
manufacturer
Products
LD•T
Industrial Hose,
• B UI
O•O
Item ships Only available in Recommended for Products that Information Information Designated as Equipment
directly from manufacturer use in food and are built to pertaining to on product CA Prop 65
manufacturer pre-packaged beverage plants; can order the featured function and products,
quantities assist with HACCP product operation according to the
compliance manufacturer
Index,
INDEX
Service Center
Copyright © 2021 Applied Industrial Technologies. All Rights Reserved.
Directory
Applied® Service Centers
Applied® at a Glance
_
^ CANADA
_
^ _
^
_
^
Operating Facilities: _
^
570+ in the United States, UNITED STATES _
^
Puerto Rico, Canada, Mexico, _
^ _
^
E-Commerce: Distribution Centers: Australia, New Zealand _
^
www.Applied.com 12 and Singapore
_
^
MEXICO
PUERTO RICO
Legend
Applied® Service Center
AUSTRALIA _
^ Applied® Distribution Center
NEW ZEALAND
Employee Associates:
Stock Keeping Units (SKUs)
_
^ _
^ SINGAPORE
7+ million 4,000+
Digital Catalog Available!
The 21/22 Applied® Product Catalog is available in digital format, too! You have instant, on-demand
access to the entire book of more than 30,000 industrial maintenance essentials – straight from your
desktop and mobile devices!
Get it Fast
Instant Applied.com access with
full shopping capabilities
Search
Extensive search functionality
Extras
Links to enriched content
(videos, CAD drawings,
full-line catalogs, etc.)
Share
Sharing via e-mail or
social media
Download
PDF download and more! Visit catalog.applied.com today!
Download today!
Just search "Applied Industrial Catalog"
Apple, the Apple logo and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android and Google Play are trademarks of Google Inc.
Technical Reference
21/22
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
i2 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Temperature
Temperature Conversions
˚C – ˚F ˚C – ˚F ˚C – ˚F ˚C – ˚F
0 to 40 41 to 80 81 to 250 260 to 600
C C or F F C C or F F C C or F F C C or F F
-17.80 0 32.0 5.00 41 105.8 27.2 81 177.8 127 260 500
-17.20 1 33.8 5.56 42 107.6 27.8 82 179.6 132 270 518
-16.70 2 35.6 6.11 43 109.4 28.3 83 181.4 138 280 536
-16.10 3 37.4 6.67 44 111.2 28.9 84 183.2 143 290 554
-15.60 4 39.2 7.22 45 113.0 29.4 85 185.0 149 300 572
-15.00 5 41.0 7.78 46 114.8 30.0 86 186.8 154 310 590
-14.40 6 42.8 8.33 47 116.6 30.6 87 188.6 160 320 608
-13.90 7 44.6 8.89 48 118.4 31.1 88 190.4 166 330 626
-13.30 8 46.4 9.44 49 120.2 31.7 89 192.2 171 340 644
-12.80 9 48.2 10.00 50 122.0 32.2 90 194.0 177 350 662
-12.20 10 50.0 10.60 51 123.8 32.8 91 195.8 182 360 680
-11.70 11 51.8 11.10 52 125.6 33.3 92 197.6 188 370 698
-11.10 12 53.6 11.70 53 127.4 33.9 93 199.4 193 380 716
-10.60 13 55.4 12.20 54 129.2 34.4 94 201.2 199 390 734
-10.00 14 57.2 12.80 55 131.0 35.0 95 203.0 204 400 752
-9.44 15 59.0 13.30 56 132.8 35.6 96 204.8 210 410 770
-8.89 16 60.8 13.90 57 134.6 36.1 97 206.6 216 420 788
-8.33 17 62.6 14.40 58 136.4 36.7 98 208.4 221 430 806
-7.78 18 64.4 15.00 59 138.2 37.2 99 210.2 227 440 824
-7.22 19 66.2 15.60 60 140.0 37.8 100 212.0 232 450 842
-6.67 20 68.0 16.10 61 141.8 43.0 110 230.0 238 460 860
-6.11 21 69.8 16.70 62 143.6 49.0 120 248.0 243 470 878
-5.56 22 71.6 17.20 63 145.4 54.0 130 266.0 249 480 896
-5.00 23 73.4 17.80 64 147.2 60.0 140 284.0 254 490 914
-4.44 24 75.2 18.30 65 149.0 66.0 150 302.0 260 500 932
-3.89 25 77.0 18.90 66 150.8 71.0 160 320.0 266 510 950
-3.33 26 78.8 19.40 67 152.6 77.0 170 338.0 271 520 968
-2.78 27 80.6 20.00 68 154.4 82.0 180 356.0 277 530 986
-2.22 28 82.4 20.60 69 156.2 88.0 190 374.0 282 540 1004
-1.67 29 84.2 21.10 70 158.0 93.0 200 392.0 288 550 1022
-1.11 30 86.0 21.70 71 159.8 99.0 210 410.0 293 560 1040
-0.56 31 87.8 22.20 72 161.6 100.0 212 413.0 299 570 1058
0.00 32 89.6 22.80 73 163.4 104.0 220 428.0 304 580 1076
0.56 33 91.4 23.30 74 165.2 110.0 230 446.0 310 590 1094
1.11 34 93.2 23.90 75 167.0 116.0 240 464.0 316 600 1112
1.67 35 95.0 24.40 76 168.8 121.0 250 482.0
2.22 36 96.8 25.00 77 170.6
2.78 37 98.6 25.60 78 172.4
3.33 38 100.4 26.10 79 174.2
3.89 39 102.2 26.70 80 176.0
4.44 40 104.0
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i3
General Formulas
Drive System Mechanical Formulas
NEED TO FIND: FORMULA:
CIRCUMFERENCE
3.1416 X DIAMETER
OF A CIRCLE
DIAMETER CIRCUMFERENCE
OF A CIRCLE (3.1416)
VELOCITY
FPM = .262 X DIAMETER X RPM
IN FEET PER MINUTE
RPM FEET PER MINUTE
REVOLUTIONS PER MINUTE (.262 X DIAMETER)
TORQUE HP X 63,025
IN/LBS RPM
Mechanical
TORQUE
FORCE (LBS) X RADIUS (IN)
IN/LBS
TORQUE (IN.LBS) X RPM
HORSEPOWER
63,025
FORCE X FPM
HORSEPOWER
33,000
1 B.T.U. = Heat required to raise 1 lb. water 1 ˚F. 1 Gallon = 231 cubic inches.
1 Kilowatt Hour = 3,415 B.T.U. Atmospheric Pressure = 14.7 pounds per sq. in.
= 29.92 inches mercury at 32 ˚F.
Heat Value of Carbon = 14,600 B.T.U. per pound.
1 Lb. Per Sq. In. Pressure = 2.3095 feet fresh water at 62 ˚F.
Latent Heat of Fusion of Ice = 143.15 B.T.U per pound. = 2.0355 inches mercury at 32 ˚F.
Latent Heat of Evaporation of Water at 212 ˚F. = 2.0416 inches mercury at 62 ˚F.
= 970.4 B.T.U. per pound. Water Pressure (pounds per sq. in.)
Total Heat of Saturated Steam at Atmospheric Pressure = .433 X height of water in feet (Fresh water at 62 ˚F).
= 1,150.4 B.T.U. per pound. Weight of 1 cu. ft. Fresh Water
1 Ton of Refrigeration = 288,000 B.T.U. per 24 hours. = 62.355 lbs. at 62 ˚F. = 59.76 lbs. at 212 ˚F.
g = Acceleration of Gravity Weight of 1 cu. ft. Air at 14.7 lbs. per sq. in. Pressure
(commonly taken as 32.16 feet per second per second). = .07608 lbs. at 62 ˚F = .08073 lbs. at 32 ˚F.
i4 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Horsepower & Torque
Horsepower Torque
SPEED, in the science of bearing application and power TORQUE is the turning moment or twisting effort in a shaft
transmission, is expressed in terms of the revolutions per minute or an object that tends to cause rotation. It is the measure
(rpms) of a rotating object. of rotational force and is expressed in foot-pounds.
VELOCITY is speed in a designated direction and is usually
expressed in terms of feet per minute (fpm). Torque = force in pounds x radius in inch or foot
FORCE is the element that produces a change in the velocity of an
object. It is usually expressed in pounds. Torque (pound-inch) = 63,025 x hp
rpm
WORK occurs when a force moves an object through a distance. It
is usually expressed in foot-pounds or inch-pounds. Torque (pound-foot) = 5,252 x hp
POWER is the rate of doing work. It is usually expressed in rpm
foot-pounds per minute (fppm).
Horsepower = TORQUE (lb-in) x rpm
HORSEPOWER is the unit of power. It is the power required to lift 63,025
33,000 pounds one foot in one minute.
Horsepower = TORQUE (lb-ft) x rpm
5,252
Illustration of Horsepower
HORSEPOWER TO TORQUE CONVERSION TABLE
Torque lb-in @ 1 hp
rpm LB-IN rpm LB-IN rpm LB-IN rpm LB-IN
3450 18 580 109 68 927 7.5 8,403
3000 21 520 121 56 1,125 6 10,504
2500 25 420 150 45 1,401 4.7 13,410
2000 32 350 180 37 1,703 4 15,756
1750 36 280 225 30 2,101 3.2 19,695
1430 44 230 274 25 2,521 2.7 23,343
1170 54 190 332 20 3,151 2.2 28,648
33,000# x 1 = 1 hp 1,000# x 33 = 1 hp
33,000 33,000 950 66 155 407 16.5 3,820 1.8 35,014
870 72 125 504 13.5 4,669 1.5 42,017
A POUND-FOOT is the moment created by a force of one 780 81 100 630 11 5,730 1.2 52,521
pound applied to the end of a lever arm one foot long. 640 98 84 750 9 7,003 1 63,025
Pound-feet indicate torque.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i5
Electrical Formulas
Drive System Electrical Formulas
NEED TO FIND FORMULA
VOLTS X AMPS X EFFICIENCY
HORSEPOWER – DC
746
VOLTS X AMPS X 1.732 X EFF X PF
HORSEPOWER – AC
746
WATTS-DC VOLTS X AMPS
ELECTRICAL
Alternating Current
To Find Single-Phase Three-Phase Direct Current
Amperes when hp X 764 hp X 746 hp X 746
horsepower is known E X Eff X pf 1.73 X E X Eff = pf E X Eff
Kw X 1000 Kw X 1000 Kw X 1000
Amperes when kilowatts are known
E X pf 1.73 X E X pf E
Amperes when Kva Kva X 1000 Kva X 1000
-
are known E 1.73 X E
I X E X pf 1.73 X I X E X pf IXE
Kilowatts
1000 1000 1000
IXE 1.73 X I X E
Kva -
1000 1000
I X E X Eff X pf 1.73 X I X E X Eff X pf I X E X Eff
Horsepower = (Output)
746 746 746
I = Amperes; E = Volts; Eff = Efficiency; pf = power factor;
Kva = Kilovolt Amperes; Kw = Kilowatts; R = Ohms.
RULES OF THUMB
i6 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Motor Repair vs. Replace Guide
REPAIR OR REPLACE MOTOR DECISION PROCESS
Failed motor
Repair Replace
Options
Repair EPACT
• Repair to original condition Level Efficient
Redesign/Upgrade Premium
• Optimize horsepower Efficient
to load
• Optimize voltage
• Change speed
• Inverter-duty winding
• Increase insulation class
Modify Customized
• Improve enclosure motor
• Add seals
• Make bearing modifications
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i7
Engineering Tables / Critical Motor Mounting Dimensions
Motor Amps @ Full Load* AC Critical Motor Mounting Dimensions
Alternating Current Alternating Current 48-449T FRAMES
Single- Single-
hp Phase 3-Phase DC hp Phase 3-Phase DC
1/2 4.9 2.0 2.7 25 - 60 92
NEMA Type 3
Note: Dimensions are for estimating purposes only.
Provides protection against rain, sleet and snow.
(Weatherproof)
C-FACE 56C-365TC
Needed when subject to great amounts of
NEMA Type 4
water from any angle—such as areas which are
(Watertight)*
repeatedly hosed down.
NEMA Type 5
Used for excluding dust. (All NEMA 12 enclosures
Dust Tight (Non-
are usually suitable for NEMA 5 use.)
Hazardous)
Key
Frame Size AH AJ AK BF No. Depth U Key Sq.
Length
NEMA Type 9 56C 2.06 5.88 4.500 3/8-16 4 0.56 0.625 0.188 1.25
For locations where combustible dusts are present.
Dust Tight (Hazardous)** 143-145TC 2.12 5.88 4.500 3/8-16 4 0.56 0.875 0.188 1.25
182-184TC 2.62 7.25 8.500 1/2-13 4 0.75 1.125 0.250 1.75
213-215TC 3.12 7.25 8.500 1/2-13 4 0.75 1.375 0.312 2.38
NEMA Type 12 254-256TC 3.75 7.25 8.500 1/2-13 4 0.75 1.625 0.375 2.88
Used for excluding oil, coolant, flying dust, lint, etc.
(Industrial Use) 284-286TC 4.38 9.00 10.500 1/2-13 4 0.75 1.875 0.500 3.25
324-326TC 5.00 11.00 12.500 5/8-11 4 0.94 2.125 0.500 3.88
364-365TC 5.62 11.00 12.500 5/8-11 4 0.94 2.375 0.625 4.25
* Not designed to be submerged.
** Class II Groups E, F and G. Note: Dimensions are for estimating purposes only.
Information used with permission of ABB Motors and Mechanical Inc. Information used with permission of ABB Motors and Mechanical Inc.
i8 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
IEC Quick Reference
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i9
NEMA Quick Reference
NEMA NEMA
Shaft Keyseat Dimensions Shaft Keyseat Dimensions
(U) (R) (S) (U) (R) (S)
3/8 21/64 FLAT 1-7/8 1-19/32 1/2
1/2 29/64 FLAT 2-1/8 1-27/32 1/2
5/8 33/64 3/16 2-3/8 2-1/64 5/8
7/8 49/64 3/16 2-1/2 2-3/16 5/8
1-1/8 63/64 1/4 2-7/8 2-29/64 3/4
1-3/8 1-13/64 5/16 3-3/8 2-7/8 7/8
1-5/8 1-13/32 3/8 3-7/8 3-5/16 1
Inch Dimensions
NEMA QUICK REFERENCE CHART
NEMA
FRAME D E 2F H N O P U V AA AB AH AJ AK BA BB BD XO TAP
9/32
42 2-5/8 1-3/4 1-11/16 1-1/2 5 4-11/16 3/8 1-1/8 3/8 4-1/32 1-5/16 3-3/4 3 2-1/16 1/8 4-5/8 1-9/16 1/4-20
SLOT
11/32
48 3 2-1/8 2-3/4 1-7/8 5-7/8 5-11/16 1/2 1-1/2 1/2 4-3/8 1-11/16 3-3/4 3 2-1/2 1/8 5-5/8 2-1/4 1/4-20
SLOT
56 3 11/32 2-7/16
3-1/2 2-7/16 6-7/8 6-5/8 5/8 1-7/8 1/2 5 2-1/16 5-7/8 4-1/2 2-3/4 1/8 6-1/2 2-1/4 3/8-16
56H 5 SLOT 2-1/8
143T 4
3-1/2 2-3/4 11/32 2-1/2 6-7/8 6-5/8 7/8 2-1/4 3/4 5-1/4 2-1/8 5-7/8 4-1/2 2-1/4 1/8 6-1/2 2-1/4 3/8-16
145T 5
182 4-1/2 2-11/16 7/8 2-1/4 2-1/8 5-7/8 4-1/2 1/8 6-1/2 3/8-16
184 5-1/2 2-11/16 7/8 2-1/4 2-1/8 5-7/8 4-1/2 1/8 6-1/2 3/8-16
4-1/2 3-3/4 13/32 8-11/16 7-7/8 3/4 5-7/8 2-3/4 2-3/8
182T 4-1/2 3-9/16 1-1/8 2-3/4 2-5/8 7-1/4 8-1/2 1/4 9 1/2-13
184T 5-1/2 3-9/16 1-1/8 2-3/4 2-5/8 7-1/4 8-1/2 1/4 9 1/2-13
213 5-1/2 3-1/2 1-1/8 3 2-3/4
215 7 3-1/2 1-1/8 3 2-3/4
5-1/4 4-1/4 13/32 10-1/4 9-9/16 3/4 7-3/8 7-1/4 8-1/2 3-1/2 1/4 9 2-3/4 1/2-13
213T 5-1/2 3-7/8 1-3/8 3-3/8 3-1/8
215T 7 3-7/8 1-3/8 3-3/8 3-1/8
254U 8-1/4 4-1/16 1-3/8 3-3/4 3-1/2
256U 10 4-1/16 1-3/8 3-3/4 3-1/2
6-1/4 5 17/32 12-7/8 12-15/16 1 9-5/8 7-1/4 8-1/2 4-1/4 1/4 10 — 1/2-13
254T 8-1/4 4-5/16 1-5/8 4 3-3/4
256T 10 4-5/16 1-5/8 4 3-3/4
284U 9-1/2 5-1/8 1-5/8 4-7/8 4-5/8
286U 11 5-1/8 1-5/8 4-7/8 4-5/8
284T 9-1/2 4-7/8 1-7/8 4-5/8 4-3/8
7 5-1/2 17/32 14-5/8 14-5/8 1-1/2 13-1/8 9 10-1/2 4-3/4 1/4 11-1/4 — 1/2-13
286T 11 4-7/8 1-7/8 4-5/8 4-3/8
284TS 9-1/2 3-3/8 1-5/8 3-1/4 3
286TS 11 3-3/8 1-5/8 3-1/4 3
324U 10-1/2 5-7/8 1-7/8 5-5/8 5-3/8
326U 12 5-7/8 1-7/8 5-5/8 5-3/8
324T 10-1/2 5-1/2 2-1/8 5-1/4 5
8 6-1/4 21/32 16-1/2 16-1/2 2 14-1/8 11 12-1/2 5-1/4 1/4 13-3/8 — 5/8-11
326T 12 5-1/2 2-1/8 5-1/4 5
324TS 10-1/2 3-15/16 1-7/8 3-3/4 3-1/2
326TS 12 3-15/16 1-7/8 3-3/4 3-1/2
364U 11-1/4 6-3/4 2-1/8 6-3/8 6-1/8
365U 12-1/4 6-3/4 2-1/8 6-3/8 6-1/8
364T 11-1/4 6-1/4 2-3/8 5-7/8 5-5/8
9 7 21/32 18-1/2 18-1/4 2-1/2 15-1/16 11 12-1/2 5-7/8 /4 13-3/8 — 5/8-11
365T 12-1/4 6-1/4 2-3/8 5-7/8 5-5/8
364TS 11-1/4 4 1-7/8 3-3/4 3-1/2
365TS 12-1/4 4 1-7/8 3-3/4 3-1/2
404U 12-1/4 7-3/16 2-3/8 7-1/8 6-7/8
405U 13-3/4 7-3/16 2-3/8 7-1/8 6-7/8
404T 12-1/4 7-5/16 2-7/8 7-1/4 7
10 8 13/16 20-5/16 20-1/8 3 18 11 12-1/2 6-5/8 1/4 13-7/8 — 5/8-11
405T 13-3/4 7-5/16 2-7/8 7-1/4 7
404TS 12-1/4 4-1/2 2-1/8 4-1/4 4
405TS 13-3/4 4-1/2 2-1/8 4-1/4 4
444U 14-1/2 8-5/8 22-7/8 22-3/8 2-7/8 8-5/8 19-9/16 8-3/8
445U 16-1/2 8-5/8 22-7/8 22-3/8 2-7/8 8-5/8 19-9/16 8-3/8
444T 14-1/2 8-1/2 22-7/8 22-3/8 3-3/8 8-1/2 19-9/16 8-1/4
445T 16-1/2 8-1/2 22-7/8 22-3/8 3-3/8 8-1/2 19-9/16 8-1/4
447T 20 8-15/16 22-15/16 23-3/4 3-3/8 8-1/2 21-11/16 8-1/4
11 9 13/16 14 16 7-1/2 1/4 16-3/4 — 5/8-11
449T 25 8-15/16 22-15/16 23-3/4 3-3/8 8-1/2 3 21-11/16 8-1/4
444TS 14-1/2 5-3/16 22-7/8 22-3/8 2-3/8 4-3/4 19-9/16 4-1/2
445TS 16-1/2 5-3/16 22-7/8 22-3/8 2-3/8 4-3/4 19-9/16 4-1/2
447TS 20 4-15/16 22-15/16 23-3/4 2-3/8 4-3/4 4NPT 21-11/16 4-1/2
449TS 25 4-15/16 22-15/16 23-3/4 2-3/8 4-3/4 4NPT 21-11/16 4-1/2
Slight differences may exist between suppliers.
NEMA FRAMES PRIOR TO 1953
Frame
5000 NEMA C-Face BA Dimensions D E F N U V BA
FRAME D E 2F H O P U V AA AB BA 143-5TC 2-3/4 66 4-1/8 2-15/16 2-1/2 2-1/4 3/4 2-1/4 3-1/8
5007S 12-1/2 10 22 15/16 26-27/32 30 2-1/2 6-1/2 4-NPT 26-7/8 8-1/2 203 2-3/4
182-4TC 3-1/2 5 4 2-7/16 3/4 2 3-1/8
204 3-1/4
5007L 12-1/2 10 22 15/16 26-27/32 30 3-7/8 11-1/8 4-NPT 26-7/8 8-1/2 213-5TC 4-1/4
224 3-3/8
5009S 12-1/2 10 28 15/16 26-27/32 30 2-1/2 6-1/2 4-NPT 26-7/8 8-1/2 254-6TC 4-3/4 5-1/2 4-1/2 3-1/4 1 3 3-1/2
225 3-3/4
5009L 12-1/2 10 28 15/16 26-27/32 30 3-7/8 11-1/8 4-NPT 26-7/8 8-1/2 254 6-1/4 5 4-1/8 3-7/16 1-1/8 3-3/8 4-1/4
5011S 12-1/2 10 36 15/16 26-27/32 30 2-1/2 6-1/2 4-NPT 26-7/8 8-1/2 284 7 5-1/2 4-3/4 4-1/4 1-1/4 3-3/4 4-3/4
5011L 12-1/2 10 36 15/16 26-27/32 30 3-7/8 11-1/8 4-NPT 26-7/8 8-1/2 324 5-1/4
8 6-1/4 5-3/8 1-5/8 4-7/8 5-1/4
326 6
Reference chart courtesy of ABB Motors and Mechanical Inc.
364 5-5/8
9 7 5-5/8 1-78/8 5-3/8 5-7/8
365 6-1/8
404 6-1/8
10 8 6-3/8 2-1/8 6-1/8 6-5/8
405 6-7/8
444 7-1/4
11 9 7-1/8 2-3/8 6-7/8 7-1/2
445 8-1/4
504 8
12-1/2 10 8-5/8 2-7/8 8-3/8 8-1/2
505 9
i10 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
AC Motor Information
Motor Frame Dimensions
H Dia.
Frame (4)
Size D E 2F Holes U Dia. BA V Min. Key
48 3 2-1/8 2-3/4 11/32 1/2 2-1/2 - 3/64 Flat
56 3-1/2 2-7/16 3 11/32 5/8 2-3/4 - 3/16 x 3/16 x 1-3/8
143T 3-1/2 2-3/4 4 11/32 7/8 2-1/4 2 3/16 x 3/16 x 1-3/8
145T 3-1/2 2-3/4 5 11/32 7/8 2-1/4 2 3/16 x 3/16 x 1-3/8
182T 4-1/2 3-3/4 4-1/2 13/32 1-1/8 2-3/4 2-1/2 1/4 x 1/4 x 1-3/4
184T 4-1/2 3-3/4 5-1/2 13/32 1-1/8 2-3/4 2-1/2 1/4 x 1/4 x 1-3/4
213T 5-1/4 4-1/4 5-1/2 13/32 1-3/8 3-1/2 3-1/8 5/16 x 5/16 x 2-3/8
215T 5-1/4 4-1/4 7 13/32 1-3/8 3-1/2 3-1/8 5/16 x 5/16 x 2-3/8
254U 6-1/4 5 8-1/4 17/32 1-3/8 4-1/4 3-1/2 5/16 x 5/16 x 2-3/4
254T 6-1/4 5 8-1/4 17/32 1-5/8 4-1/4 3-3/4 3/8 x 3/8 x 2-7/8
256U 6-1/4 5 10 17/32 1-3/8 4-1/4 3-1/2 5/16 x 5/16 x 2-3/4
256T 6-1/4 5 10 17/32 1-5/8 4-1/4 3-3/4 3/8 x 3/8 x 2-7/8
284U 7 5-1/2 9-1/2 17/32 1-5/8 4-3/4 4-5/8 3/8 x 3/8 x 3-3/4
284T 7 5-1/2 9-1/2 17/32 1-7/8 4-3/4 4-3/8 1/2 x 1/2 x 3-1/4
284TS 7 5-1/2 9-1/2 17/32 1-5/8 4-3/4 3 3/8 x 3/8 x 1-7/8
286U 7 5-1/2 11 17/32 1-5/8 4-3/4 4-5/8 3/8 x 3/8 x 3-3/4
286T 7 5-1/2 11 17/32 1-7/8 4-3/4 4-3/8 1/2 x 1/2 x 3-1/4
286TS 7 5-1/2 11 17/32 1-5/8 4-3/4 3 3/8 x 3/8 x 1-7/8
324U 8 6-1/4 10-1/2 21/32 1-7/8 5-1/4 5-3/8 1/2 x 1/2 x 4-1/4
324T 8 6-1/4 10-1/2 21/32 2-1/8 5-1/4 5 1/2 x 1/2 x 3-7/8
324TS 8 6-1/4 10-1/2 21/32 1-7/8 5-1/4 3-1/2 1/2 x 1/2 x 2
326U 8 6-1/4 12 21/32 1-7/8 5-1/4 5-3/8 1/2 x 1/2 x 4-1/4
326T 8 6-1/4 12 21/32 2-1/8 5-1/4 5 1/2 x 1/2 x 3-7/8
326TS 8 6-1/4 12 21/32 1-7/8 5-1/4 3-1/2 1/2 x 1/2 x 2
364U 9 7 11-1/4 21/32 2-1/8 5-7/8 6-1/8 1/2 x 1/2 x 5
364US 9 7 11-1/4 21/32 1-7/8 5-7/8 3-1/2 1/2 x 1/2 x 2
364T 9 7 11-1/4 21/32 2-3/8 5-7/8 5-5/8 5/8 x 5/8 x 4-1/4
364TS 9 7 11-1/4 21/32 1-7/8 5-7/8 3-1/2 1/2 x 1/2 x 2
365U 9 7 12-1/4 21/32 2-1/8 5-7/8 6-1/8 1/2 x 1/2 x 5
365US 9 7 12-1/4 21/32 1-7/8 5-7/8 3-1/2 1/2 x 1/2 x 2
365T 9 7 12-1/4 21/32 2-3/8 5-7/8 5-5/8 5/8 x 5/8 x 4-1/4
365TS 9 7 12-1/4 21/32 1-7/8 5-7/8 3-1/2 1/2 x 1/2 x 2
404U 10 8 12-1/4 13/16 2-3/8 6-5/8 6-7/8 5/8 x 5/8 x 5-1/2
404US 10 8 12-1/4 13/16 2-1/8 6-5/8 4 1/2 x 1/2 x 2-3/4
404T 10 8 12-1/4 13/16 2-7/8 6-5/8 7 3/4 x 3/4 x 5-5/8
404TS 10 8 12-1/4 13/16 2-1/8 6-5/8 4 1/2 x 1/2 x 2-3/4
405U 10 8 13-3/4 13/16 2-3/8 6-5/8 6-7/8 5/8 x 5/8 x 5-1/2
405US 10 8 13-3/4 13/16 2-1/8 6-5/8 4 1/2 x 1/2 x 2-3/4
405T 10 8 13-3/4 13/16 2-7/8 6-5/8 7 3/4 x 3/4 x 5-5/8
405TS 10 8 13-3/4 13/16 2-1/8 6-5/8 4 1/2 x 1/2 x 2-3/4
444U 11 9 14-1/2 13/16 2-7/8 7-1/2 8-3/8 3/4 x 3/4 x 7
444US 11 9 14-1/2 13/16 2-1/8 7-1/2 4 1/2 x 1/2 x 2-3/4
444T 11 9 14-1/2 13/16 3-3/8 7-1/2 8-1/4 7/8 x 7/8 x 6-7/8
444TS 11 9 14-1/2 13/16 2-3/8 7-1/2 4-1/2 5/8 x 5/8 x 3
445U 11 9 16-1/2 13/16 2-7/8 7-1/2 8-3/8 3/4 x 3/4 x 7
445US 11 9 16-1/2 13/16 2-1/8 7-1/2 4 1/2 x 1/2 x 2-3/4
445T 11 9 16-1/2 13/16 3-3/8 7-1/2 8-1/4 7/8 x 7/8 x 6-7/8
445TS 11 9 16-1/2 13/16 2-3/8 7-1/2 4-1/2 5/8 x 5/8 x 3
Information used with permission of ABB Motors and Mechanical Inc.
Frame Assignments
Motor Speed, rpm Motor Speed, rpm
hp 3600 1800 1200 900 hp 3600 1800 1200 900
1/8 - 48 - - 15 254T,256U 254T,284U 284T,284TS,324U 286T,326U
1/6 - 48 - - 20 256T,286U 256T,286U 286T,286TS,326U 324T,364U
1/4 48 48 48 56 25 284TS,324US 284T,284TS,324U 324T,324TS,364U 326T,365U
1/3 48 48,56 56 56 30 286TS,326US 286T,284TS,326U 326T,326TS,365U 364T,404U
1/2 48,56 48,56 56 56 40 324TS,364US 324T,324TS,364U 354T,404U 365T,405
3/4 56 56 56,143T, 182U 56,145T 50 326TS,365US 326T,326TS,365U 365T,405U 404T
1 56,143T,182U 56,143T,182U 56, 143T, 184U 182T 60 364TS 364T,364TS 404T 405T
1-1/2 56,143T,182U 56,145T,184U 145T, 184U 184T 75 365TS 365T,365TS 405T 444T
2 56,145T,184U 56,145T,184U 184T, 213U 213T 100 405TS 405T,405TS 444T 445T
3 56,145T,182T,184U 182T,213U 213T, 215U 215T,254U 125 444TS 444T,444TS 445T -
5 184T,213U 184T,215U 215T,254U 254T,256U 150 445TS 445T,445TS - -
7-1/2 213T,215U 213T,254U 254T,256U 256T,284U 200 445TS 445T,445TS - -
10 215T,254U 215T,256U 256T,284U 284T,286U 250 447TS 447T,447TS - -
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i11
AC Motor Selection Guide
Date:
Service Center: Service Center Contact:
Customer:
Address:
City: State: Zip:
Contact: Phone:
Fax:
E-mail:
Application Information
Please describe the application in detail:
Application: New Replacement Why?
Speed Required: rpm
Torque Required: #/in. (if known)
Starting Torque Required: #/in. (if known)
Ambient Temp Range: ˚F to ˚F
Environment: Wet Humid Dusty/Dirty Clean
Chemical Stress: No Yes Explain
Operating Time: Hours per Day
Starting Methods: Starter VFD Other Explain
Starts/Stops: per Hour
Reversing: Times per Hour
Brake Required: No Yes Torque?
#/ft Where?
Size/Space/Weight Limitations: No Yes Explain
Motor Specifications
Electric Motor: hp rpm Frame Foot Mount or C-Face (check one)
Voltage Phase Full Load Amps
Enclosure: (check one) Open Dripproof Totally Enclosed-Fan Cooled
X-proof (Class & Group?)
Spec. Paint or Coating: No Yes Explain
Spec. Lubricant: No Yes Explain
Other Considerations:
i12 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Speed Reducer / Gearmotor Selection Guide
Date:
Service Center: Service Center Contact:
Customer:
Address:
City: State: Zip:
Contact: Phone:
Fax:
E-mail:
Application Information
Application: New Replacement Why?
Speed Required: rpm
Torque Required: #/in. (if known)
Starting Torque Required: #/in. (if known)
Ambient Temp Range: ˚F to ˚F
Environment: Wet Humid Dusty/Dirty Clean
Chemical Stress: No Yes Explain
Operating Time: Hours per Day
Starts/Stops: per Hour
Reversing: Times per Hour
Brake Required: No Yes Torque?
#/ft Where?
Size/Space/Weight Limitations: No Yes Explain
Prime Mover
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i13
Speed Reducer / Gearmotor Selection Guide
Continued from previous page.
Reducer Information
Ratio:
Configuration: (check one) Concentric (in-line) Right Angle Offset Parallel
Mounting Style: (check one) Base (foot) Flanged Output Shaft Mount
Screw Conveyor Drive
Input Style: (check one) C-Face Input Shaft Integral Motor
Output Style: (check one) Solid Shaft Hollow Shaft Double Extended
Motor Mount: (check one) None Req’d Scoop Top Mount
Motorbase
Backstop: No Yes Rotation viewing end of L.S. shaft CW CCW
Spec. Paint or Coating: No Yes Explain
Spec. Lubricant: No Yes Explain
Other Considerations:
i14 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Keyways
Rectangular Keyways Square Keyways
Metric:
W x H Key W
W x T2 Keyway
ISO Standard — mm
Shaft Diameter
T2 H/2
Groove Width
D
H
≤ > W H T1 T2* T1 r H/2
6 8 2 2 1.2 1
8 10 3 3 1.8 1.4
10 12 4 4 2.5 1.8
12 17 5 5 3.0 2.3
17 22 6 6 3.5 2.8
22 30 8 7 4.0 3.3
30 38 10 8 5.0 3.3
38 44 12 8 5.0 3.3
44
50
50
58
14
16
9
10
5.5
6.0
3.8
4.3
D
58 65 18 11 7.0 4.4
65 75 20 12 7.5 4.9 Metric:
75 85 22 14 9.0 5.4
85 95 25 14 9.0 5.4
W x H Key
95 110 28 16 10.0 6.4 W x T2 Keyway
110 130 32 18 11.0 7.4
130 150 36 20 12.0 8.4
150 170 40 22 13.0 9.4
170 200 45 25 15.0 10.4 American Standard — Inches
200 230 50 28 17.0 11.4 Shaft Diameter Groove Width
230 260 56 32 20.0 12.4 W H T1# T2#
D
260 290 63 32 20.0 12.4
7/16 9/16 1/8 1/8 – –
290 330 70 36 22.0 14.4
9/16 7/8 3/16 3/16 – –
330 380 80 40 25.0 15.4
7/8 1-1/4 1/4 1/4 – –
380 440 90 45 28.0 17.4
1-1/4 1-3/8 5/16 5/16 – –
440 500 100 50 31.0 19.5
1-3/8 1-3/4 3/8 3/8 – –
* Groove dimensions for woodruff keys DIN 6888 in 1-3/4 2-1/4 1/2 1/2 – –
accordance with DIN 6885 Sheet 1 (with black clearance). 2-1/4 2-3/4 5/8 5/8 – –
BS 4235 Pt. 1 - 1972 2-3/4 3-1/4 3/4 3/4 – –
3-1/4 3-3/4 7/8 7/8 – –
In the absence of specific details, manufacturing will be based upon DIN 6885 - T1 3-3/4 4-1/2 1 1 – –
4-1/2 5-1/2 1-/14 1-1/4 – –
5-1/2 6-1/2 1-1/2 1-1/2 – –
Information used with permission of Martin. 6-1/2 7-1/2 1-3/4 1-1/2 – –
7-1/2 9 2 1-1/2 – –
9 11 2-1/2 1-3/4 – –
11 13 3 2 – –
Shaft Keyseats/Hub Keyways 13 15 3-1/2 2-1/2 – –
15 18 4 3 – –
Standard Keyseats/Keyways 18 22 5 3-1/2 – –
22 26 6 4 – –
26 30 7 5 – –
D,d R
Depth # Tolerance each on T1 and T2 is -.000/+.010.
Shaft W R Cutter
Size width Regular Shallow Run-out
5/16 to 7/16 3/32 3/64 - 1/2
1/2 to 3/16 1/8 1/16 - 9/16 T1 = D-SD2 - W2 - H
5/8 to 7/8 3/16 3/32 - 11/16 2 2
13/16 to 1-1/4 1/4 1/8 - 13/16
1-5/16 to 1-3/8 5/16 3/32 - 15/16
1-7/16 to 1-3/4 3/8 3/16 - 1-1/16
T2 = H - D-SD2 - W2
1-13/16 to 2-1/4 1/2 1/4 1/8 1-3/16
2 2
2-5/16 to 2-3/4 5/8 5/16 3/16 1-5/16
2-15/16 to 3-1/4 3/4 3/8 3/16 1-9/16
3-5/16 to 3-3/4 7/8 7/16 1/4 1-11/16
3-13/16 to 4-1/2 1 1/2 1/4 1-3/4
4-9/16 to 5-1/2 1-1/4 5/8 1/4 1-15/16
5-9/16 to 6-1/2 1-1/2 3/4 1/4 2-1/8
6-9/16 to 7-1/2 1-3/4 3/4 1/4 2-1/8
7-9/16 to 9 2 3/4 3/8 2-1/8
9-1/16 to 11 2-1/2 7/8 3/8 2-5/16
11-1/16 to 13 3 1 3/8 2-7/16
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i15
Keyway & Key Dimensions / Tap & Drill Sizes
i16 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Belts
NOMINAL V-BELT CROSS SECTIONS
Industry Standard Width W, Thickness T,
Belt Section Description in Inches in Inches
3L 3/8 7/32
4L FHP 1/2 5/16
5L 21/32 3/8
3V 3/8 5/16
5V Narrow 5/8 17/32
8V 1 29/32
A 1/2 5/16
B 21/32 13/32
Classical
C 7/8 17/32
D 1-1/4 3/4
RP
CHI
P. Span Length
SQUEAL
CHIR
P D. Diameter (in)
F. Force (lbs) d. Diameter (in)
Q. Deflection (in)
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i17
Troubleshooting Belts
V-Belt Systems
TYPE OF FAILURE
Cracks in backing
Tensile failure
Belt tracking
Tooth shear
i18 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Troubleshooting Belts
PROBABLE CAUSES
Belt/Pulley Incompatible
Different Manufacturers
Mixed Old & New Belts
Contact w/ Obstruction
Substandard Sheaves
Stalled Drive Sheaves
Exposure to Elements
Insufficient Take Up
Drive Misalignment
Pried Over Sheaves
Excessive Vibration
Insufficient Tension
Drive Underbelted
Excessive Tension
Foreign Material
Rough Sheaves
Excessive Dust
Incorrect Belts
Worn Sheaves
Excessive Oil
Shock Load
PROBLEM
Loose Cover & Swell
Weathering or “Craze” Cracks
Gouges
Spin Burn
Envelope Wear
Uneven Envelope Wear
Ply Separation
Side Split
Broken Belts
Belts Turn Over
Hardening & Premature Cracking
Belt Squeal
Excessive Stretch
Excessive Vibration
Belts Too Long At Installation
Belts Too Short At Installation
Mismatched Belts At Installation
Cut Thru on Top (Joined Belts)
Flange Wear (Synchronous Belts)
Web Fabric Wear (Synchronous Belts)
Tooth Shear (Synchronous Belts)
SOLUTIONS
Clean Sheaves & Belt
Provide Protection
Check Machinery
Operate Properly
Tension Properly
Replace Pulleys
Install Property
Redesign Drive
Replace Belts
Free Sheaves
File Smooth
Align Drive
Check Fit
PROBLEM
Loose Cover & Swell
Weathering or “Craze” Cracks
Gouges
Spin Burn
Envelope Wear
Uneven Envelope Wear
Ply Separation
Side Split
Broken Belts
Belts Turn Over
Belt Squeal
Excessive Stretch
Excessive Vibration
Belts Too Long At Installation
Belts Too Short At Installation
Mismatched Belts At Installation
Cut Thru on Top (Joined Belts)
Flange Wear (Synchronous Belts)
Web Fabric Wear (Synchronous Belts)
Tooth Shear (Synchronous Belts)
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i19
Coefficients of Friction
Coefficients of Friction “F”
Static Sliding
Material Dry Lubricated Dry Lubricated
Aluminum on aluminum 1.35 - - -
* Wet pavement.
i20 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Bearing Facts
Improper lubrication and contamination are responsible for 70% of all early Double row ball bearings combine the features of two single row angular
bearing failures. contact bearings mounted in duplex.
Dirt is responsible for more than 90% of all bearing troubles. Always check bearing fit-up after assembly.
Bearing life is reduced by approximately 20% with outer race rotation. Recommended shaft finishes for Grade 1 bearings under 2” - max. 32 rms;
When a bearing is press fitted onto a steel shaft or press fitted into steel over 2” - max. 64 rms; housing bores - 125 rms max.
or cast iron housings, the internal clearance is reduced by 80% of fit High points of eccentricity of inner and outer races of high precision
interference. bearings are marked with a burnished spot on one face.
Deep groove ball bearings (Conrad) are ideally designed to permit radial It is desirable to press needle bearings from the lettered end.
loading and thrust loading from either direction (the combined load should Do not check O.D. of a drawn cup needle bearing unmounted.
not exceed 100% of radial load rating).
Bearings lubricated with petroleum greases have a shelf life of approximately
Maximum type ball bearings (with precision ground filling slots) have a seven years.
radial capacity of 10-15% more than the Conrad type. Thrust is limited to
approximately 10% of radial capacity. If you double the speed of a bearing, you cut its life in half. If you double the
load on a ball bearing, you cut its life to 1/8 of its original life.
The angular contact design permits this bearing to carry high thrust in ONE
DIRECTION ... Equal to 150% of its radial load capacity. Coefficient of thermal expansion for steel is .000007 inch per ºF and
.0000063 inch per ºF for carbon steel.
Typical causes include improper cleaning methods, poor oil Typical causes include damaged packaging, improper Typical causes include improper grease or oil viscosity, low
filtration, or seal wear. storage, and worn or damaged seals. flow rate, and high operation temperatures.
• Hard particle contamination • Roller-spaced spalling • Race deformation from excessive heat generation
• Contamination bruising • Corrosion on the outer ring race • Peeling/Scoring damage on roller end
• Fine particle contamination • Etching and corrosion • Complete bearing lockup
• Internal cage wear from fine particle contamination • Advanced corrosion and spalling • Rib and roller end scoring
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i21
Bearings
Continued from previous page.
Typical causes include improper tool selection (hardened Typical causes include improper handling, tools, and Typical causes include improper machining, grinding, or
drivers), and poor handling practices. procedures. repair methods.
• Outer ring denting • Cage deformation • Localized spalling
• Fractured inner ring rib • Roller binding and skewing • Marks from high spot on the housing
• Broken rib on outer race • Bent bridge • Metal tearing and wear
• Roller spaced nicking • Deep dent on cage • Pinch point
Typical causes include rough handling, and shock loads Typical causes include excessive vibration during shipment,
exceeding the material’s limits. or when the shaft is stationary.
Typical causes include wrong size and poor form, shaft or
housing stress riser, and inaccurate machining. • Roller impact damage • Extreme vibration
• True metal deformation • False brinell on a shaft where a cylindrical bearing was
• Loose outer ring fit in a wheel hub
mounted
• Fracture on inner ring • Shock loading
• Wear caused by vibration
• Metal contaminant • True brinell on needle bearing drawn cup race • False brinell on outer race
Typical causes include improper electrical grounding of Typical causes include improper oil film, excess cage friction,
equipment, welding damage, or static discharge. and gross roller sliding.
• Electric arc fluting • Roller flats and adhesive wear Typical causes include improper tool design, tool
• Fluting caused by electric current • Spherical roller bearing with adhesive wear positioning, poor roller alignment, and excessive force.
• Electric arc pitting • Skidding, raceway surface • Roller lock-up
• Roller with electric arc burns • Cylindrical roller end with adhesive wear • Bearing stamping lip fracture
WARNING
• Never spin a bearing with compressed air. The rollers may be forcefully expelled, creating a risk of serious bodily harm.
• Proper maintenance and handling practices are critical. Failure to follow installation instructions and to maintain proper lubrication can result in
equipment failure, creating a risk of serious bodily harm.
Photos courtesy of The Timken Company.
i22 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Shaft and Housing Fits
SHAFT FITS
Standard Bearings
BEARING BORE SHAFT ROTATING SHAFT STATIONARY
Basic SHAFT DIAMETER MEAN FIT SHAFT DIAMETER MEAN FIT
Types Number Max Min Max Min TIGHT Max Min LOOSE
Single Row 00 0.3937 0.3934 0.3939 0.3936 0.00020 0.3935 0.3931 0.00025
Extra Light 01 0.4724 0.4721 0.4726 0.4723 0.00020 0.4722 0.4717 0.00030
200 Light 02 0.5906 0.5903 0.5908 0.5905 0.00020 0.5904 0.5899 0.00030
300 Medium 03 0.6693 0.6690 0.6695 0.6692 0.00020 0.6691 0.6686 0.00030
400 Heavy 04 0.7874 0.7870 0.7878 0.7875 0.00045 0.7871 0.7866 0.00035
Double Row 19 3.7402 3.7394 3.7409 3.7403 0.00080 3.7397 3.7389 0.00050
5200 Light 20 3.9370 3.9362 3.9377 3.9371 0.00080 3.9365 3.9357 0.00050
5300 Medium 21 4.1339 4.1331 4.1346 4.1340 0.00080 4.1334 4.1326 0.00050
5400 Heavy 22 4.3307 4.3299 4.3314 4.3308 0.00080 4.3302 4.3924 0.00050
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i23
Shaft and Housing Fits
HOUSING FITS
Standard Bearings
HOUSING STATIONARY HOUSING ROTATING
Basic Number BEARING O.D. HOUSING BORE HOUSING BORE
EXTRA MEAN FIT MEAN FIT
Types LIGHT LIGHT MEDIUM HEAVY Max Min Min Max LOOSE Min Max TIGHT
00 1.0236 1.0232 1.0236 1.0241 0.00055 1.0228 1.0236 0.0002
01 1.1024 1.1020 1.1024 1.1029 0.00055 1.1016 1.1024 0.0002
200 1.1811 1.1807 1.1811 1.1816 0.00055 1.1803 1.1811 0.0002
02 201 1.2598 1.2593 1.2598 1.2604 0.00055 1.2588 1.2598 0.00025
03 202 300 1.3780 1.3775 1.3780 1.3786 0.00055 1.3770 1.3780 0.00025
Single Row 301 1.4567 1.4562 1.4567 1.4573 0.00055 1.4557 1.4567 0.00025
Extra Light 203 1.5748 1.5743 1.5748 1.5754 0.00055 1.5738 1.5748 0.00025
200 Light 04 302 1.6535 1.6530 1.6535 1.6541 0.00055 1.6525 1.6535 0.00025
300 Medium 05 204 303 1.8504 1.8499 1.8504 1.8510 0.00055 1.8494 1.8504 0.00025
400 Heavy 205 304 2.0472 2.0467 2.0472 2.0479 0.00060 2.0460 2.0472 0.00035
14 212 310 408 4.3307 4.3301 4.3307 4.3316 0.00075 4.3293 4.3307 0.0004
213 311 409 4.7244 4.7238 4.7244 4.7253 0.00075 4.7230 4.7244 0.0004
214 4.9213 4.9205 4.9213 4.9223 0.00090 4.9197 4.9213 0.0004
17 215 312 410 5.1181 5.1173 5.1181 5.1191 0.00090 5.1165 5.1181 0.0004
18 216 313 411 5.5118 5.5110 5.5118 5.5128 0.00090 5.5102 5.5118 0.0004
20 217 314 412 5.9055 5.9047 5.9055 5.9065 0.00090 5.9039 5.9055 0.0004
Double Row 218 315 6.2992 6.2982 6.2992 6.3002 0.00100 6.2976 6.2992 0.0003
5200 Light 21 413 6.2992 6.2982 6.2992 6.3002 0.00100 6.2976 6.2992 0.0003
5300 Medium 22 219 316 6.6929 6.6919 6.6929 6.6939 0.00100 6.6913 6.6929 0.0003
5300 Heavy 24 220 317 414 7.0866 7.0856 7.0866 7.0876 0.00100 7.0850 7.0866 0.0003
221 318 415 7.4803 7.4791 7.4803 7.4814 0.00115 7.4785 7.4803 0.0003
26 222 319 416 7.8740 7.8728 7.8740 7.8751 0.00115 7.8722 7.8740 0.0003
417 8.2677 8.2665 8.2677 8.2688 0.00115 8.2659 8.2677 0.0003
224 320 8.4646 8.4634 8.4646 8.4657 0.00115 8.4628 8.4646 0.0003
321 418 8.8583 8.8571 8.8583 8.8594 0.00115 8.8565 8.8583 0.0003
226 9.0551 9.0539 9.0551 9.0562 0.00115 9.0533 9.0551 0.0003
322 9.4488 9.4476 9.4488 9.4499 0.00115 9.4470 9.4488 0.0003
* Dimensions to which shafts and housings should be machined to produce a satisfactory operating assembly of the bearings with these units.
Standards were arrived by the Bearings Engineer Committee.
i24 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hose
Hose Selection Date:
Just Remember the acronym STAMPED:
Size – Hose ID and length Customer:
Temperature – Environment and product temperature
Application – How is the product being used? Address:
Material – What is going through the hose?
Pressure – PSI or suction? City: State: Zip:
Ends – What fittings do you need?
Delivery – How soon do you need it? Contact: Phone:
STAMPED form – To determine the proper hose assembly, fill out this form
and send it to your local Applied Industrial Technologies service center. E-mail: Fax:
SIZE PRESSURE(S)
Tolerances Velocity
TEMPERATURE Impulse
OIL RESISTANCE
Tube
Cover
Flame Resistance
Noncontaminating Materials
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i25
Defining Hose & Assembly Length
Identifying Overall Assembly Length Measuring the Offset Angle
Unless otherwise specified, the assembly’s overall length is measured from The offset angle between two fittings is the number of degrees measured in
the extreme end of one fitting to the extreme of the other; except for the a clockwise direction, between the fitting nearest the viewer and the farthest
O-ring face seal fittings which shall be measured from the sealing face. Where end fitting. Tolerance on the offset angle is +/- 3 degrees for assemblies up to
elbow fittings are used, measurement shall be to the centerline of the sealing 24 inches long and +/- 5 degrees for assemblies 24 inches and longer.
surface of the elbow end.
The following illustration shows the clockwise angle separation between a
“close” fitting and a “far” fitting. The “close” fitting would be defined as
Assembly Length Measurements the fitting closest when looking at an assembly end to end. The “far” fitting
would be defined as the fitting on the far of the assembly when looking at
an assembly end to end. The far end is used as the reference point and the
“close” end establishes the angular difference.
0°
0°
45°
315° 45°
315°
0° 90° 0°
45° 270° 45°
315° 135° 315°
135° 135°
225° 225°
180° 180°
0° 0°
45° 45°
315° 315°
270° 270°
90°
270°
90°
90°
135° 135°
225° 225°
180° 180°
0° 0°
45° 45°
315° 315°
90° 90°
0°
270° 270°
45°
135° 315° 135°
225° 225°
225° 135°
180° 90°
180°
270°
135°
225°
180°
180°
i26 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Fluid Power General Troubleshooting
General Fluid Power Troubleshooting Charts
Use the charts on the following pages to help in listing all the possible causes of trouble when you begin diagnosing and testing
a machine. Once you have located the cause, check the item in the chart again for the possible remedy. The technical manual for
each machine supplements these charts by giving more detailed and specific causes and remedies.
System Inoperative
Possible Causes: Remedy:
Oil low in reservoir. Check level and fill to full mark. Check system for leaks.
Filter dirty or plugged. Drain oil and replace filters. Try to find source of contamination.
Oil lines could be dirty or have inner walls that are collapsing, cutting off oil supply.
Restriction in system.
Clean or replace lines. Clean orifices.
Air leaks in suction line. Repair or replace lines.
Clean and repair pump. If necessary, drain and flush hydraulic system. Try to find source of
Dirt in pump.
contamination.
Repair or replace pump. Check for problems causing pump wear such as misalignment or
Badly worn pump.
contaminated oil.
Examine and test valves, motors, cylinders, etc. for external and internal leaks. If wear is
Badly worn components.
abnormal, try to locate the cause.
Tighten fittings or replace defective lines. Examine mating surfaces on couplers for
Oil leak in pressure lines.
irregularities.
Components not properly adjusted. Refer to machine technical manual for proper adjustment of components.
Test relief valves to make sure they are opening at their rated pressure. Examine seals for
Relief valve defective.
damage that could cause leaks. Clean relief valves and check for broken springs, etc.
Pump rotating in wrong direction. Reverse to prevent damage.
Slipping or broken pump drive. Replace couplers or belts if necessary. Align them and adjust tension.
Pump not operating. Check for shut-off device on pump or pump drive.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i27
Fluid Power General Troubleshooting
Dirty oil. Drain and refill with clean oil. Look for source of contamination and replace filters.
Incorrect relief valve pressure. Check pressure and clean or replace relief valves.
Examine and test valves, cylinders, motors, etc. for external and internal leaks.
Internal component oil leakage.
If wear is abnormal, try to locate cause.
Restriction in pump suction line. Clean or replace.
Dented, obstructed or undersized oil lines. Replace defective or undersized oil lines. Remove obstructions.
Control valve stuck open. Free all spools so that they return to neutral position.
Heat not radiating properly. Clean dirt and mud from reservoir, oil lines, coolers, and other components.
Automatic unloading control inoperative
Repair valve.
(if equipped).
Adjustable orifice restricted too much. Back out orifice and adjust it. Check machine specifications for proper setting.
i28 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Fluid Power General Troubleshooting
Low oil level. Fill reservoir. Look for leaks. Drain and replace oil.
Water in oil. Check filler breather on reservoir. Heat exchanger may be cracked.
Air leak in line from reservoir to pump. Tighten or replace suction line.
Worn pump shaft seal. Clean sealing area and replace seal. Check oil for contamination or pump for misalignment.
Suction line plugged or pinched. Clean or replace line between reservoir and pump.
Sludge and dirt in pump. Disassemble and inspect pump and lines. Clean hydraulic system. Determine cause of dirt.
Reservoir air vent plugged. Remove breather cap, flush, and clean air vent.
Air in oil. Tighten or replace suction line. Check system for leaks. Replace pump shaft seal.
Replace worn parts or complete pump if parts are badly worn or scored. Determine cause
Worn or scored pump bearings or shafts.
of scoring.
Inlet screen plugged. Clean screen.
Broken or damaged pump parts. Repair pump. Look for cause of damage such as contamination or too much pressure.
Sticking or binding parts. Repair binding parts. Clean parts and change oil if necessary.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i29
Fluid Power General Troubleshooting
Tie bolts too tight (on valve stacks). Use manufacturer’s recommendation to adjust tie bolt torque.
Valve broken or scored internally. Repair broken or scored parts. Locate source of contamination that caused scoring.
Tie bolts too loose (on valve stacks). Use manufacturer’s recommendation to adjust tie bolt torque.
Replace O-rings, especially between valve stacks. If contamination has caused O-rings
Worn or damaged O-rings.
to wear, clean system and look for source of contamination.
If valve is cracked, look for a cause like too much pressure or pipe fittings that are over
Broken valve parts.
tightened.
Damaged cylinder barrel. Replace cylinder barrel. Correct cause of barrel damage.
Replace seal. If contamination caused seal to wear, look for source. Wear may be
Rod seal leaking. caused by external as well as internal contaminants. Check piston rod for scratches or
misalignment.
Loose parts. Tighten parts until leakage has stopped.
Check rod for nicks or scratches that could cause seal damage or allow oil leakage.
Piston rod damaged.
Replace defective rods.
Replace packing. Check oil for contamination that could cause wear.
Leaking cylinder packing.
Check alignment of cylinder.
Leaking lines or fittings to cylinder. Check and tighten. Examine mating surfaces on couplers for irregularities.
i30 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hydraulic Symbols
Adjustable Cushion
Spring
Advance Only
Pressure Compensated
Units (Arrow parallel to
short side of symbol) Differential Piston Manual
Electric Motor
Ve nted
Pe dal or Tr eadle
Accumulator,
Pressurized Spring Loaded
Mechanical
Line, To Reservoir Accumulator,
Gas Charged
Detent
Above Fluid Level
Heater
Below Fluid Level
Pressure Compensated
Ve nted Manifold
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i31
Hydraulic Symbols
Two-Position
Two Way
Two-Position
Three Way
Two-Position
Four Way
Two-Position
In Transition
Three-Position
Four Way
Closed Center
Three Position
Open Center
Four Way
Three Position
Tandem Center
Four Way
Three Position
Float Center
Four Way
i32 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Pneumatic Symbols
Filter/Separator with
Check Manual General Symbol
manual drain
Filter/Separator with
Flow Control Push Button
automatic drain
Mechanical Cam,
Lubricator less drain 2-Position, 3-Way
Toggle, etc.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i33
Pneumatic Symbols
Flow Direction
Hydraulic Medium
Flow Direction
Gaseous Medium
Energy Source
Flexible Line
i34 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Cylinder Types
Standard Double-Acting
Power stroke is in both directions and is used in the majority of
applications.
Single-Acting
When thrust is needed in only one direction, a single-acting
cylinder may be used. The inactive end is vented into the
atmosphere through a breather filter for pneumatic applications,
or vented to a resevoir below the oil level in hydraulic applications.
Double Rod
Used when equal displacement is needed on both sides of the
piston, or when it is mechanically advantageous to couple a
load to each end. The extra end can be used to mount cams for
operating limit switches, etc.
Telescoping
Available with up to 4 or 5 sleeves; collapsed length is shorter
than standard cylinders. Available either as single or double-
acting, they are relatively expensive compared to standard
cylinders.
Tandem
A tandem cylinder is made up of two cylinders mounted in line with
pistons connected by a common piston rod and rod seals installed
between the cylinders to permit double acting operation of each.
Tandem cylinders allow increased output force when mounting
width or height are restricted.
Duplex
A duplex cylinder is made up of two cylinders mounted in line
with pistons not connected and with rod seals installed between
the cylinders to permit double acting operation of each. Cylinders
may be mounted with piston rod to piston (as shown) or back to
back, and are generally used to provide three position operation.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i35
Cylinders
Hydraulic Cylinder Speeds — Inches/Minutes
231 X GPM
This chart is based on the formula: V (Velocity) =
Eff. Cyl. Area (Sq. In.)
Flow-GPM
Piston Rod
Diameter Diameter 1 2 3 5 10 12 15 20 25 50 75
- 298 596 849 149
1
1/2 392 784 1176 196
- 130 260 392 654 1308
1 1/2 5/8 158 316 476 792 1584
1 235 470 706 1176 2352
- 73 146 221 368 736 883 1120
3/4 85 170 257 428 956 1025 1283
2
1 97 184 294 490 980 1175 1465
1 3/8 139 278 418 697 1394 1673 2090
- 47 94 141 235 470 565 675 940 1175
1 56 112 168 280 560 672 840 1120 1400
2 1/2
1 3/8 67 134 203 339 678 813 1015 1355 1695
1 3/4 92 184 277 463 926 1110 1385 1850 2310
- 32 64 98 163 326 392 490 653 817
1 36 72 110 184 368 440 551 735 920
3
1 1/2 43 86 131 218 436 523 655 872 1090
2 58 116 176 294 588 705 882 1175 1470
- 24 48 72 120 240 288 360 480 600 1200
1 1/4 27 54 82 137 274 330 411 548 685 1370
3 1/2
1 3/4 32 64 96 160 320 384 480 640 800 1600
2 35 70 107 178 356 428 534 712 890 1780
- 18 36 55 92 184 220 276 368 460 920
1 1/4 20 40 61 102 240 244 306 408 510 1020
4 1 3/4 22 44 68 113 226 273 339 452 565 1130
2 24 48 73 122 244 294 366 488 610 1220
2 1/2 30 60 90 150 300 362 450 600 750 1500
- 12 24 35 58 116 141 174 232 290 580 870
1 1/2 13 26 39 64 128 155 193 258 320 640 960
2 14 28 42 70 140 168 210 280 350 700 1050
5
2 1/2 16 32 47 78 156 188 235 315 390 780 1170
3 18 36 55 92 184 220 275 365 460 920 1380
3 1/2 22 44 66 111 222 266 333 444 555 1110 1665
- 8 16 24 41 82 98 123 162 202 404 606
1 3/4 9 18 27 45 90 107 135 180 225 450 675
2 1/2 10 20 30 50 100 118 150 200 250 500 750
6
3 11 22 33 54 108 130 165 206 270 540 810
3 1/2 12 24 37 62 124 148 185 245 310 620 930
4 15 30 44 73 146 176 220 295 365 730 1095
- 4 8 14 23 46 55 69 92 115 230 345
3 1/2 5 1/2 11 17 28 56 68 85 115 140 280 420
8 4 6 12 18 30 60 73 90 122 150 300 450
5 7 1/2 15 22 38 76 90 114 150 185 375 555
5 1/2 8 1/2 17 26 43 86 104 129 172 215 430 645
- 3 6 9 15 30 35 44 60 73 146 220
4 1/2 3 1/2 7 11 18 36 44 55 75 92 184 275
10 5 4 8 12 20 40 47 60 80 100 200 300
5 1/2 4 1/2 9 13 21 42 50 63 84 105 210 315
7 5 1/2 11 17 29 58 69 87 115 145 290 435
i36 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Cylinders
Theoretical Push and Pull Forces for Pneumatic and Hydraulic Cylinders
The cylinder output forces are derived from the formula: V1 = (P2 + 14.7)V2
F=PXA
14.7
F = Force in pounds
P = Pressure at the cylinder in pounds per sq. inch, gauge
A = Effective area of cylinder piston in sq. inches
Free air refers to normal atmospheric conditions of the air V1 = Free air consumption per inch of stroke (cubic feet)
at sea level (14.7 psi). Use cu. ft. free air required data (see V2 = Cubic feet displaced per inch of stroke
chart below) to compute CFM required from a compressor P2 = Gauge pressure required to move maximum load
at 80 cu. ft. of free air required. Other pressures can be
calculated using the information below.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i37
Cylinders
How to Select a Hydraulic Cylinder and Power Unit
Selection of the proper components for a hydraulic system is quite simple when you use the accompanying
table and chart. Here is an example to illustrate their use. Assume your requirements are: 20,000 lbs. of force,
28” stroke, and 7.5 seconds for full cylinder extension.
Displacement
(in cubic inches)
3 .5
7
Cylinder Bore GPM
(in inches) Time
8 Stroke (in seconds) 100
(in inches) 20
6 .1
1 50
5 30 .2
2 .4 25
4 4 50 .6 18
6 1
3 10 70 10
2
2 1/2 20 100 4
40 6 5
2 60 10
200
100 250 20
1 1/2
40
300 60 1 .5
100
500
200
700 .6
400
1000
.25
.18
2000
i38 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
High Pressure Cylinders
Cylinder Speed
This chart will help you calculate the time required for an Enerpac cylinder to lift a load when powered by a
10,000 psi Enerpac hydraulic pump. The Cylinder Speed Chart can also be used to determine the pump type
and model best suited for an application when you know the plunger speed required.
To determine: To determine:
Cylinder plunger speed Cylinder plunger speed
Your 30 ton cylinder needs An RC-308 cylinder (30 ton)
to move a load at a speed of is powered by a 5-Series
6.50 sec/in. Simply go down Hushh pump. While lifting
from the top of the chart, to the load, the cylinder plunger
the value of 6.50 sec/in. Then will require 3.2 seconds to
follow the chart to the right to travel 1 inch. While extending
find that the 3-Series Hushh towards the load, the cylinder
pump or Titan most suitable plunger travels at .61 sec/in.
for your application.
Power No No No No No No No No
Source Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Pump Type
7 7 15 15 21 21 34 34 43 43 73 73 105 105 137 137 P-391
2 7 4 15 5 21 8 34 10 43 16 73 24 105 30 137 P-392
Manual 1 7 2 15 3 21 5 34 7 43 11 73 16 105 21 137 P-80/84/801
1 7 1 15 1 21 2 34 3 43 5 73 7 105 9 137 P-802/842
1 3 1 8 1 11 1 18 1 23 2 38 2 55 3 71 P-462/464
Power No No No No No No No No
Source Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Pump Type
.30 3.0 .67 6.7 .94 9.4 1.5 15.5 1.9 19.5 3.3 33.2 4.8 47.7 6.2 61.9 0.5 hp Economy
.09 1.0 .22 2.2 .31 3.1 .50 5.2 .63 6.5 1.1 11.1 1.6 15.9 2.0 20.6 Titan
Electric .40 3.0 .90 6.7 1.3 9.4 2.1 15.5 2.6 19.5 4.4 33.2 6.4 47.7 8.3 61.9 0.5 hp Submerged
(speed based .25 1.4 .56 3.2 .79 4.5 1.3 7.4 1.6 9.3 2.8 15.8 4.0 22.7 5.2 29.5 20-Series
on 60 Hz) .09 1.0 .21 2.2 .29 3.1 .48 5.2 .61 6.5 1.0 11.1 1.5 15.9 1.9 20.6 3-Series Hushh
.09 .50 .21 1.1 .29 1.6 .48 2.6 .61 3.2 1.0 5.5 1.5 8.0 1.9 10.3 5-Series Hushh
.06 .13 .13 .29 .19 .41 .30 .67 .38 .84 .65 1.4 .94 2.1 1.2 2.7 8000-Series
Air 1.0 5.9 2.2 13.4 3.1 18.8 5.2 30.9 6.5 39.0 11.0 66.3 15.9 95.5 20.6 123.9 Turbo II Pump
(speed based 1.2 7.4 2.7 16.8 3.8 23.6 6.2 38.6 7.8 48.7 13.3 82.9 19.1 119.3 24.8 154.7 PA-133
on 100 psi air .09 6.6 .21 14.9 .29 20.9 .48 34.3 .60 43.3 1.0 73.7 1.5 106.0 1.9 137.5 10-Series
pressure) .07 2.0 .16 4.5 .22 6.3 .36 10.3 .46 13.0 .80 22.1 1.1 31.8 1.5 41.3 Modular Air
.30 1.5 .67 3.4 .94 4.7 1.5 7.7 1.9 9.7 3.3 16.6 4.8 23.9 6.2 30.9 Atlas Pump 2.5 hp
.12 1.1 .28 2.4 .39 3.4 .64 5.6 .81 7.1 1.4 12.1 2.0 17.3 2.6 22.5 Atlas Pump 5.0 hp
Gasoline
.12 .59 .28 1.3 .39 1.9 .64 3.1 .81 3.9 1.4 6.6 2.0 9.5 2.6 12.4 Atlas Pump 5.5 hp
.06 .30 .13 .67 .19 .94 .31 1.5 .39 1.9 .66 3.3 .95 4.7 1.2 6.2 Atlas Pump 13 hp
RC-308 cylinder:
Cylinder
Effective area A is 6.50 in 2
(sec/in)
Source: Enerpac
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i39
Pumps
Electric Motor Horsepower
Required to Drive a Hydraulic Pump
For the purposes of this chart, pump efficiency was assumed to be 85%.
As horsepower varies directly with flow or pressure, multiply proportionately to determine values not shown.
For instance, at 4000 psi, multiply 2000 psi values by 2.
Pump Pressure psi
GPM 100 200 250 300 400 500 750 1000 1250 1500 2000
1/2 0.04 0.07 0.09 0.10 0.14 0.17 0.26 0.34 0.43 0.52 0.69
1 0.07 0.14 0.17 0.21 0.28 0.34 0.52 0.69 0.86 1.03 1.37
1 1/2 0.10 0.21 0.26 0.31 0.41 0.52 0.77 1.03 1.29 1.54 2.06
2 0.14 0.28 0.34 0.41 0.55 0.69 1.03 1.37 1.72 2.06 2.75
2 1/2 0.17 0.34 0.43 0.52 0.69 0.86 1.29 1.72 2.15 2.58 3.43
3 0.21 0.41 0.52 0.62 0.83 1.03 1.54 2.06 2.57 3.09 4.12
3 1/2 0.24 0.48 0.60 0.72 0.96 1.20 1.80 2.40 3.00 3.60 4.81
4 0.28 0.55 0.69 0.82 1.10 1.37 2.06 2.75 3.43 4.12 5.49
5 0.34 0.69 0.86 1.03 1.32 1.72 2.57 3.43 4.29 5.15 6.86
6 0.41 0.82 1.03 1.24 1.65 2.06 3.09 4.12 5.15 6.18 8.24
7 0.48 0.96 1.20 1.44 1.92 2.40 3.60 4.81 6.01 7.21 9.61
8 0.55 1.10 1.37 1.65 2.20 2.75 4.12 5.49 6.86 8.24 11.00
9 0.62 1.24 1.55 1.85 2.47 3.09 4.63 6.18 7.72 9.27 12.40
10 0.69 1.37 1.62 2.06 2.75 3.43 5.15 6.86 8.58 10.30 13.80
11 0.76 1.51 1.89 2.27 3.02 3.78 5.66 7.55 9.44 11.30 15.10
12 0.83 1.65 2.06 2.47 3.30 4.12 6.18 8.24 10.30 12.40 16.50
13 0.89 1.79 2.23 2.68 3.57 4.46 6.69 8.92 11.20 13.40 17.80
14 0.96 1.92 2.40 2.88 3.84 4.81 7.21 9.61 12.00 14.40 19.20
15 1.03 2.06 2.57 3.09 4.12 5.15 7.72 10.30 12.90 15.40 20.60
16 1.10 2.20 2.75 3.30 4.39 5.49 8.24 11.00 13.70 16.50 22.00
17 1.17 2.33 2.92 3.50 4.68 5.83 8.75 11.70 14.60 17.50 23.30
18 1.24 2.47 3.09 3.71 4.94 6.18 9.27 12.40 15.40 18.50 24.70
19 1.30 2.61 3.26 3.91 5.22 6.52 9.78 13.00 16.30 19.60 26.10
20 1.37 2.75 3.43 4.12 5.49 6.86 10.30 13.70 17.20 21.60 27.50
25 1.72 3.43 4.29 5.15 6.86 8.58 12.90 17.20 21.50 25.80 34.30
30 2.06 4.12 5.15 6.18 8.24 10.30 15.40 20.6 25.70 30.90 41.20
35 2.40 4.81 6.01 7.21 9.61 12.00 18.00 24.00 30.00 36.00 48.00
40 2.75 5.49 6.86 8.24 11.00 13.70 20.60 27.50 34.30 41.20 54.90
45 3.09 6.18 7.72 9.27 12.40 15.40 23.20 31.00 38.60 46.30 61.80
50 3.43 6.86 8.58 10.30 13.70 17.20 25.70 34.30 42.90 51.50 68.60
55 3.78 7.55 9.44 11.30 15.10 18.90 28.30 37.80 47.20 56.60 75.50
60 4.12 8.24 10.30 12.40 16.50 20.60 30.90 41.20 51.50 61.80 83.40
65 4.46 8.92 11.20 13.40 17.80 22.30 33.50 44.60 55.80 66.90 89.20
70 4.81 9.61 12.00 14.40 19.20 24.00 36.00 48.00 60.10 72.10 96.10
75 5.15 10.30 12.90 15.40 2.60 25.70 38.60 51.40 64.30 77.20 103.00
80 5.49 11.00 13.70 16.50 22.00 27.50 41.20 54.90 68.60 82.40 109.80
90 6.18 12.40 15.40 18.50 24.70 30.90 46.30 61.80 77.20 92.70 123.60
100 6.86 13.70 17.20 20.60 27.50 34.40 51.50 68.60 85.80 103.00 137.30
i40 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Valves
How to Determine Proper Air Valve Size
Most manufacturers’ catalogs provide flow ratings for valves in Select a valve that has a Cv factor of .7 or higher. In most cases,
Cv, based on National Fluid Power Association (NFPA) standard a 1/4” valve would be sufficient.
T3.21.3. The following tables and formulas will enable you
to quickly size a valve properly. The traditional, often-used It is considered good engineering practice to limit the pressure
approach of using the valve size equivalent to the port in the drop Dp to approximately 10% of primary pressure P1. The
cylinder can be very costly. Cylinder speed, not port size, should smaller the allowable pressure drop, the larger the required
be the determining factor. valve will become.
The following Cv calculations are based upon simplified for- After the minimum required Cv has been calculated, the proper
mulas which yield results with acceptable accuracy under the size valve can be selected from the catalog.
following standard condition:
Air at a temperature of 68 °F (20 °C) Table 1:
Absolute downstream or secondary pressure must be 53% of Cylinder push bore area F for standard size cylinders
Cylinder Area F
absolute inlet or primary pressure or greater. Below 53%, the air Bore Size D (In.) (Sq. In) Bore Size D (In.) Cylinder Area F (Sq. In)
velocity may become sonic and the Cv formula does not apply. 3/4 0.44 4 12.57
Nomenclature: 1 0.79 4 1/2 15.90
1 1/8 0.99 5 19.64
B Pressure drop factor
1 1/4 1.23 6 28.27
C Compression factor
1 1/2 1.77 7 38.48
Cv Flow factor 1 3/4 2.41 8 50.27
D Cylinder Diameter (I N) 2 3.14 10 78.54
F Cylinder Area (SQ IN) 2 1/2 4.91 12 113.10
L Cylinder Stroke (I N) 3 1/4 8.30 14 153.94
p1 Inlet or Primary Pressure (PS I G)
p2 Outlet or Secondary Pressure (PS I G)
∆p Pressure differential (p1- p2) (psiD)
Table 2:
q Air flow at actual condition (CFM)
Q Air flow of free air (SCFM) Compression factor C and pressure drop factor B
Pressure Drop Factor B for Various
t Time to complete one cylinder stroke (SEC) Pressure Drops ∆ p
Inlet
T Absolute temperature at operating (°R) Pressure Compr. 2 5 10 15 20
pressure. Deg R = Deg F + 460 (psiG) Factor C psiD psiD psiD psiD psiD
10 1.7 6.5 - - - -
Valve Sizing for Cylinder Actuation Direct Formula 20 2.4 7.8 11.8 - - -
30 3.0 8.9 13.6 18.0 - -
40 3.7 9.9 15.3 20.5 23.6 -
50 4.4 10.8 16.7 22.6 26.4 29.0
Cylinder Area (F) Cylinder Stroke Compression (C) 60 5.1 11.7 18.1 24.6 29 32.0
(Sq. In.) X (L) X Factor
(See Table 1) (In.) (See Table 2) 70 5.8 12.5 19.3 26.5 31.3 34.8
80 6.4 13.2 20.5 28.2 33.5 37.4
Cv = 90 7.1 13.9 21.6 29.8 35.5 39.9
100 7.8 14.5 22.7 31.3 37.4 42.1
Time to 110 8.5 15.2 23.7 32.8 39.3 44.3
Pressure Drop Complete 120 9.2 15.8 24.7 34.2 41.0 46.4
(B) Factor X X 28.8
Cylinder Stroke
(See Table 2) 130 9.8 16.4 25.6 35.5 42.7 48.4
(Sec) 140 10.5 16.9 26.5 36.8 44.3 50.3
150 11.2 17.5 27.4 38.1 45.9 52.1
160 11.9 18.0 28.2 39.3 47.4 53.9
170 12.6 18.5 29.0 40.5 48.9 55.6
Example: Cylinder size 4” Dia. x 10” stroke. Time to extend: 2 180 13.2 19.0 29.8 41.6 50.3 57.2
seconds. Inlet pressure 90 psiG. Allowable pressure drop 5 190 13.9 19.5 30.6 42.7 51.7 58.9
200 14.6 20.0 31.4 43.8 53.0 60.4
psiD. Determine Cv. 210 15.3 20.4 32.1 44.9 54.3 62.0
220 16.0 20.9 32.8 45.9 55.6 63.5
Solution: 230 16.7 21.3 33.5 46.9 56.8 64.9
240 17.3 21.8 34.2 47.9 58.1 66.3
F = 12.57 Sq. In. (Table 1) 250 18.0 22.2 34.9 48.9 59.3 67.7
C = 7.1 (Table 2) B = 21.6
12.57 X 10 X 7.1
Cv= = 0.7
21.6 X 2 X 28.8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i41
Fluid Power Formulas
Basic Formulas
Formula For: Word Formula: Letter Formula:
Fluid Formulas
Formula For: Word Formula: Letter Formula:
COMPRESSIBILITY OF OIL
In Additional Required Oil Pressure (psi) x Volume of Oil under Pressure VA = PV/250,000 (approx.)
Additional Volume =
to Reach Pressure 250,000 (approx.)
COMPRESSIBILITY 1
Compressibility = C(ß) = 1/BM
OF A FLUID Bulk Modulus of the Fluid
Centistokes = ( SUS
4.635
) CS = SUS/4.635
i42 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Fluid Power Formulas
Pump Formulas
Formula For: Word Formula: Letter Formula:
PUMP OUTLET FLOW rpm x Pump Displacement (Cu. In./Ref.)
Flow = Q = nd/231
In Gallons/Minute 231
PUMP INPUT POWER Flow Rate Output (GPM) x Pressure (psi) Hpin = QP/1714Eff. or
Horsepower Input =
In Horsepower Required 1714 Efficiency (Overall) (GPM x psi)/1714Eff.
Actuator Formulas
Formula For: Word Formula: Letter Formula:
CYLINDER FORCE
Area = Pressure (psi) x Net Area (sq in.) F = psi x A or F = PA
In Pounds, Push or Pull
CYLINDER VELOCITY or SPEED 231 x Flow Rate (GPM)
Velocity = v = 231Q/720A or v = .3208Q/A
In Feet/Second 12 x 60 x Net Area (sq in.)
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i43
Fluid Power Formulas
Thermal Formulas
Formula For: Word Formula: Letter Formula:
RESERVOIR COOLING CAPACITY
Heat (BTU/Hr) = 2 x Temperature Difference Between
Based on Adequate Air BTU/Hr = 2.0 x DT x A
Reservoir Walls and Air (Fº) x Area of Reservoir (Sq. Ft.)
Circulation
HEAT IN HYDRAULIC OIL
Due to System Inefficiency Heat (BTU/Hr) = Flow Rate (GPM) x 210 x Temp. Difference (Fº) BTU/Hr = Q x 210 x DT
(SG=.89-.92)
HEAT IN FRESH WATER Heat (BTU/Hr) = Flow Rate (GPM) x 500 x Temp. Difference (Fº) BTU/Hr = Q x 500 x DT
Note: One British Thermal Unit (BTU) is the amount of heat required to raise the temperature of one pound of water one degree Fahrenheit.
One Horsepower = 2545 BTU/Hr.
Accumulator Formulas
Formula For: Word Formula: Letter Formula:
PRESSURE OR VOLUME
Original Pressure x Original Volume = Final Pressure x Final Volume P1V1 = P2V2 Isothermic
With Constant T (Temperature)
PRESSURE OR TEMPERATURE
Original Pressure x Final Temp. = Final Pressure x Original Temp. P1T2 = P2T1 Isochoric
With Constant V (Volume)
VOLUME OR TEMPERATURE
Original Volume x Final Temp. = Final Volume x Original Temp. V1T2 = V2T1 Isobaric
With Constant P (Pressure)
PRESSURE OR VOLUME Original Press. x Original Volumen = Final Press. x Final Volumen P1V1n=P2V2n
With Temp. Change Due to
Heat of Compression Final Temp./Orig. Temp. = (Orig. Vol./Final Vol.)n-1 = (Final Press./Orig. Press.)(n-1)/n T2/T1=(V1/V2)n-1 = (P2/P1)(n-1)/n
Cubic
0.0610 0.0000353 1 0.001 0.000264 0.000220 0.002205 0.0001
Centimeters
Imperial
277.274 0.160459 4,546.09 4.54374 1.20032 1 10.0172 4.54373
Gallons
Pounds of
27.6798 0.0160184 453.59 0.453592 0.119825 0.0998281 1 0.453593
Water
i44 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Fluid Power Glossary
ABSOLUTE – A measure having as its zero point or base the complete absence of CELSIUS – A temperature scale. 0° Celsius is the freezing point of water.
the entity being measured.
CENTISTOKES (cSt) – A unit of kinematic viscosity. 1 cSt = 10-2 square
2
centimeters per second (cm /s).
ABSOLUTE PRESSURE (psia) – The pressure above absolute zero, the sum of
atmospheric and gauge pressure. CHAMBER – A compartment within a hydraulic unit. May contain elements to aid
in operation or control of a unit. Examples: spring chamber, drain chamber, etc.
ACCUMULATOR – A container in which fluid is stored under pressure as a source
of fluid power. It also absorbs shocks and surges and smoothes out operation. CHANNEL – A fluid passage, the length of which is large with respect to its cross-
sectional dimension.
ACTUATOR – A device for converting hydraulic energy into mechanical energy. A CHARGE (supercharge) –
motor or cylinder.
• To replenish a hydraulic system above atmospheric pressure.
AERATION – Air in the hydraulic fluid. Excessive aeration causes the fluid to appear • To fill an accumulator with fluid under pressure (see pre-charge pressure).
milky and components to operate erratically because of the compressibility of the air
trapped in the fluid. CHARGE PRESSURE – The pressure at which replenishing fluid is forced into the
hydraulic system (above atmospheric pressure).
AMPLITUDE OF SOUND – The loudness of a sound.
CHECK VALVE – A valve which permits flow of fluid in one direction only.
ANNULAR AREA – A ring shaped area – often refers to the net effective area of the
rod side of a cylinder piston, i.e., the piston area minus the rod area. CIRCUIT – The complete path of flow in a hydraulic system including the flow-
generating device.
ASTM – American Society for Testing Materials.
CLOSED CENTER – The condition where pump output is not unloaded to tank in
ATMOSPHERE (ONE) – A pressure measure equal to 14.7 psi. the center or neutral operating condition.
ATMOSPHERIC PRESSURE – Pressure on all objects in the atmosphere because CLOSED CIRCUIT – A piping arrangement in which pump delivery, after passing
of the weight of the surrounding air. At sea level, about 14.7 psi absolute. through other hydraulic components, bypasses the reservoir and returns directly to
pump inlet.
BACK CONNECTED – A condition where port connections are on normally
unexposed surfaces of hydraulic equipment. (Gasket mounted units are back COMPENSATOR CONTROL – A displacement control for variable pumps and
connected.) motors which alters displacement in response to pressure changes in the system as
related to its adjusted pressure setting.
BACK PRESSURE – A pressure in series. Usually refers to pressure existing on
the discharge side of a load. It adds to the pressure required to move the load. COMPONENT – A single pneumatic or hydraulic unit.
BAFFLE – A device, usually a plate, installed in a reservoir to separate the pump COMPRESSIBILITY – The change in volume of a unit volume of a fluid when it is
inlet from return lines. The baffle also aids fluid cooling. subjected to a unit change in pressure.
BAR – A unit of pressure based on 105 Newtons per square meter, equal to 100 CONTROL – A device used to regulate the function of a unit (see Hydraulic
kPa (kilopascals), approx. equal to 14.5 psig. Control, Manual Control, Mechanical Control and Compensator Control).
BERNOULLI PRINCIPLE – An increase in velocity causes a decrease in pressure. COOLER – A heat exchanger used to remove heat from the hydraulic fluid.
BLEED-OFF – To divert a specific controllable portion of pump flow directly to a COUNTERBALANCE VALVE – A valve which maintains resistance to flow in
reservoir. one direction but permits free flow in the other. Usually connected to the outlet of a
vertical double-acting cylinder to prevent uncontrolled falling, dropping or cavitation.
BREATHER – A device which permits air to move in and out of a container or
component to maintain atmospheric pressure. CRACKING PRESSURE – The pressure at which a pressure actuated valve
begins to pass fluid.
BSPP – British Standard Parallel Pipe.
CUSHION – A device sometimes built into the ends of a cylinder which restricts the
BSPT – British Standard Pipe Thread.
flow of fluid at the outlet port, thereby slowing the motion of the piston rod.
BY-PASS – A secondary passage for fluid flow.
CYLINDER – A device which converts fluid power into linear mechanical force and
CARTRIDGE – motion. It usually consists of a movable element such as a piston and piston rod,
• The replaceable element of a fluid filter. plunger rod, plunger or ram, operating within a cylindrical bore.
• The pumping unit from a vane pump, composed of the rotor, ring, vanes and one DELIVERY – The volume of fluid discharged by a pump in a given time, usually
or both side plates. expressed in gallons per minute (gpm).
• A removable valve element that fits into a cavity in a hydraulic component, e.g.
DELTA P (∆P) – The change in pressure between two points in a system, such as
manifold.
in a passageway or between the inlet and outlet of a component.
CASE DRAIN LINE – A line conducting fluid from a component housing to the
DEMULSIFY – To separate water from oil.
reservoir.
DE-VENT – To close the vent connection of a pressure control valve permitting the
CAVITATION – A localized gaseous condition within a liquid stream which occurs
valve to function at its adjusted pressure setting.
where the pressure is reduced to the vapor pressure.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i45
Fluid Power Glossary
DIRECTIONAL VALVE – A valve which selectively directs fluid to or prevents fluid HEAD – The height of a column of fluid above a given point expressed in linear
from desired channels. units. Head is often used to indicate gauge pressure. The pressure is equal to the
height times the density of the fluid.
DISPLACEMENT – The quantity of fluid which can pass through a pump, motor
or cylinder in a single revolution or stroke. HEAT – The form of energy that has the capacity to create warmth or to increase the
temperature of a substance. Any energy that is wasted or used to overcome friction
DOUBLE ACTING CYLINDER – A cylinder in which fluid force can be applied in is converted to heat. Heat is measured in calories or British Thermal Units (BTUs).
either direction. One BTU is the amount of heat required to raise one pound of water one degree
DRAIN – A passage in, or a line from, a hydraulic component which returns leakage Fahrenheit.
fluid independently to a reservoir or to a vented manifold. HEAT EXCHANGER – A device which transfers heat through a conducting wall
EFFICIENCY – The ratio of output to input. Volumetric efficiency of a pump is the from one fluid to another.
actual output flow divided by the theoretical or design flow. The overall efficiency of a HORSEPOWER (hp) – The power required to lift 550 pounds one foot in one
hydraulic system is the output power divided by the input power. Efficiency is usually second or 33,000 pounds one foot in one minute. A horsepower is equal to 746
expressed as a percent. watts or to 2544 BTUs per hour.
ELECTRO-HYDRAULIC SERVO VALVE – A directional type valve which HYDRAULIC BALANCE – A condition of equal opposed hydraulic forces acting
receives a variable or controlled electrical signal and which controls or meters on a part in a hydraulic component.
hydraulic flow.
HYDRAULIC CONTROL – A control which is actuated by hydraulically induced
EMULSION – A fluid formed by the suspension of one liquid in another. forces.
ENERGY – The ability or capacity to do work. Measured in units of work. HYDRAULICS – Engineering science pertaining to liquid pressure and flow.
FEEDBACK (or feedback signal) – The output signal from a feedback HYDRO – Greek word for water.
element.
HYDRODYNAMICS – Engineering science pertaining to the energy of liquid
FILTER – A device whose primary function is the retention of insoluble pressure and flow.
contaminants from a fluid by a porous media.
HYDROSTATICS – Engineering science pertaining to the energy of liquids at rest.
FLOODED – A condition where the pump inlet is charged by placing the reservoir
oil level above the pump inlet port. INTENSIFIER – A device which converts low pressure fluid power to higher
pressure fluid power.
FLOW CONTROL VALVE – A valve which controls the rate of oil flow.
JIC – Joint Industry Conference.
FLOW RATE – The volume, mass or weight of a fluid passing through a conductor
per unit of time. Normally expressed in gallons per minute (gpm). 37° JIC – Refers to a JIC standard that establishes the 37° flare for use in
plumbing with steel tubing. A 45° flare is commonly used for copper tube. This
FLUID – distinction assists in preventing the accidental use of low pressure fittings, designed
• A liquid or gas. for use with copper tubing, in hydraulic systems where pressures merit steel tubing
• A liquid that is specially compounded for use as a power transmitting medium in and appropriate fittings.
a hydraulic system.
KINETIC ENERGY – Energy that a substance or body has by virtue of its mass
FORCE – Any push or pull measured in units of weight. In hydraulics, total force (weight) and velocity.
is expressed by the product of pressure and the area of the surface on which the
LAMINAR (flow) – A condition where the fluid particles move in continuous
pressure acts. F = P x A.
parallel paths. Streamline flow.
FOUR-WAY VALVE – A directional valve having four flow paths.
LEVERAGE – A gain in output force over input force by sacrificing the distance
FREQUENCY – The number of times an action occurs in a unit of time. Frequency moved. Mechanical advantage or force multiplication.
is the basis of all sound. A pump or motor’s basic frequency is equal to its speed in
LIFT – The height a body or column of fluid is raised; for instance, from the
revolutions per second multiplied by the number of pumping chambers.
reservoir to the pump inlet. Lift is sometimes used to express a negative pressure or
FRONT CONNECTED – A condition wherein piping connections are on normally vacuum. The opposite of head.
exposed surfaces of hydraulic components.
LINE – A tube, pipe or hose which acts as a conductor of hydraulic fluid.
FULL FLOW – In a filter, the condition where all the fluid must pass through the
LINEAR ACTUATOR – A device for converting fluid power into linear motion. A
filter element.
piston or ram.
GAUGE PRESSURE (psig) – A pressure scale which ignores atmospheric
LOAD SENSING – A type of hydraulic circuit where the actual pressure required
pressure. Its zero point is atmospheric pressure
by the load is transmitted to the control elements such as valves and pumps. This
(14.7 psia at sea level).
typically allows the system to deliver only the pressure and flow required, usually
gph (gallons per hour) - Unit of measure representing volume of liquid flow. saving energy.
gpm (gallons per minute) - Unit of measure representing volume of liquid flow. MANIFOLD – A fluid conductor which provides multiple connection ports.
i46 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Fluid Power Glossary
MANUAL CONTROL – A control actuated by the operator, regardless of the means POTENTIOMETER – A control element in the servo-system which measures and
of actuation. Example: Lever or foot pedal control for directional valves. controls electrical potential.
MANUAL OVERRIDE – A means of manually actuating an automatically- POWER – Work per unit of time. Measured in horsepower (hp) or watts.
controlled device.
ppm (parts per million) - Unit of measure representing the number of particles
MECHANICAL CONTROL – Any control actuated by linkages, gears, screws, in a given body.
cams or other mechanical elements.
PRECHARGE PRESSURE – The pressure of compressed gas in an accumulator
METER – To regulate the amount or rate of fluid flow. prior to the admission of liquid.
METER-IN – To regulate the amount of fluid flow into an actuator or system. PRESSURE – Force per unit area; usually expressed in psi, bar, or kPa.
METER-OUT – To regulate the flow of discharge fluid from an actuator or system. PRESSURE DIFFERENTIAL (PRESSURE DROP) –The difference in pressure
between any two points of a system or a component.
MICRON (µ) – Size of a particle one millionth of a meter.
PRESSURE LINE – The line carrying the fluid from the pump outlet to the
MICRON RATING – The size of the particles a filter will remove. pressurized port of the actuator.
MOTOR – A rotary motion device which changes hydraulic energy into mechanical PRESSURE OVERRIDE – The difference between the cracking pressure and the
energy; a rotary actuator. full flow pressure of a valve.
NEWTON METER (Nm) – Metric unit of measure representing force. PRESSURE REDUCING VALVE – A valve which limits the maximum pressure at
NPT – National Pipe Taper (requires pipe sealant). its outlet regardless of the inlet pressure.
NPTF – National Pipe Taper Fuel or Dry Seal Pipe Threads (may not require pipe psia (pounds per square inch absolute) – See Absolute Pressure.
sealant). psig (pounds per square inch gauge) – See Gauge Pressure.
OPEN CENTER – A condition where pump delivery circulates freely to tank in the PUMP – A device which converts mechanical force and motion into hydraulic fluid
center or neutral position. flow.
ORIFICE – A restriction, the length of which is small in respect to its cross-sectional RAM – A single acting cylinder with a plunger rather than a piston and rod. The
dimensions. plunger in a ram type cylinder.
OXIDATION – The chemical reaction of elements with oxygen which cause RECIPROCATION – Back and forth straight line motion or oscillation.
corrosion or deterioration.
RELIEF VALVE – A pressure operated valve which bypasses pump delivery to the
PASCAL – Unit of pressure in metric system, usually expressed in kPa reservoir, limiting system pressure to a predetermined maximum value.
(kilopascals). 1 kPa = 0.01 bar = 0.145 psi.
REPLENISH – To add fluid to maintain a full hydraulic system.
PASSAGE – A fluid conducting path which lies within or passes through a
component. RESERVOIR – A container for storage of liquid in a fluid power system.
PI (¶) – Ratio of circumference of circle to diameter. Numerically expressed as RESTRICTION – A reduced cross-sectional area in a line or passage which
approximately 3.1416. produces a pressure drop.
PILOT PRESSURE – Auxiliary pressure used to actuate or control hydraulic or RETURN LINE – A line used to carry exhaust fluid from the actuator back to a tank.
pneumatic components.
REVERSING VALVE – A four-way directional valve used to reverse a double acting
PILOT VALVE – An auxiliary valve to control the operation of another valve. The cylinder or reversible motor.
controlling stage of a 2-stage valve.
ROTARY ACTUATOR – A device for converting hydraulic energy into rotary
PISTON – A cylindrically shaped part which fits within a cylinder and transmits or motion.
receives motion by means of a connecting rod.
SAE – The Society of Automotive Engineers.
PLUNGER – A cylindrically shaped part with only one diameter that is used to
transmit thrust (also called a ram). SAE O-Ring – Refers to a style of threaded connection that employs straight
thread to secure the fitting and an o-ring to provide sealing. This style of connection
POPPET – That part of certain valves which prevents flow when it closes against a is very popular for use in hydraulic systems and can be removed and reinstalled
seat. numerous times without damaging the sealing ability of the connection. Tapered
pipe thread is actually damaged to make a fluid tight seal. Vibration and repeated
PORT – An internal or external terminus of a passage in a component. connection of tapered pipe threaded connections will always result in leaks. An o-ring
POSITIVE DISPLACEMENT – A characteristic of a pump or motor which has style or a 37° JIC flared connection are the best choices in preventing leaks.
the inlet positively sealed from the outlet so that fluid cannot recirculate in the pump scfm (standard cubic feet per minute) - Unit of measure representing
or motor. volume of gas flow.
POTENTIAL ENERGY – The energy level change which results when an object is
raised to a new height.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® i47
Fluid Power Glossary
i48 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies & Analytical Tools
11
Hand, Power & Analytical Tools
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
Pneumatic 9
Products
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
Equipment
...and more!
Index,
INDEX
Service Center
Directory
Hand, Power & Analytical Tools
©2019, RIDGID, Inc. The RIDGID logo is a registered trademark of RIDGID, Inc. in the U.S. and other countries.
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
21/22
Abrasives (Brushes, Sheets, Wheels, etc.)..................29-35 Pliers & Wire Strippers.........................................................11-12
Analytical Tools Pry Bars.....................................................................................14
AC Recovery..............................................................................19 Ratchets......................................................................................2
Alignment Tools...................................................................45-46 Retaining Rings & Retaining Ring Pliers....................................11
Dial & Digital Indicators..................................................45,50-51 Scissors.....................................................................................11
Inspection Cameras.............................................................47-48 Snips.........................................................................................12
Multimeters.............................................................. 41-45,47-48 Sockets & Drive Tools............................................... 2-6,10,25-26
Stroboscopes.............................................................................47 Threading Tools.........................................................................13
Tachometers..............................................................................47 Tire Inflators & Gauges........................................................54-55
Thermal Imagers & Cameras................................................40-41 Tool Sets....................................................................... 2-8,11-12
Thermometers.................................................................39-40,43 Tool Suspension Balancers........................................................51
Vibration Testers..................................................................44-47 Torque Tools...........................................................................4,10
Voltage Detectors...........................................................39,41-46 Utility Knives.............................................................................10
Bearing Tools Vises...............................................................................17-18,20
Fitting Tools...............................................................................24 Wrenches..........................................................................7-10,24
Heaters.....................................................................................24 Hydraulic Tools & Equipment
Pullers..................................................................................20-24 Cylinders...................................................................................39
Spanner Wrenches....................................................................24 Jacks....................................................................................18-19
Brushes Spreaders..................................................................................39
Abrasive................................................................................33-35 Material Handling
Adapters....................................................................................35 Balancers..................................................................................51
Cup...........................................................................................34 Clamps......................................................................................17
End............................................................................................34 Hoists...................................................................................51-54
Wheel........................................................................................35 Pullers..................................................................................20-24
Wire.....................................................................................34-35 Pallet Trucks...........................................................................20
Car Charging Stations.........................................................20 Plumbing Tools.................................................................12-13
Cutting Tools (Cutters, Drill Bits, Taps & Dies, Oils, etc.) Pneumatic Tools
...................................................................10-13,25-34,37-38 Drills....................................................................................35,38
Electrical Testers & Indicators......................................39-48 Impact Wrenches.................................................................36-37
Hand Tools Sanders & Grinders..............................................................37-38
Clamps......................................................................................17 Scalers......................................................................................39
Cutters.................................................................................12-13 Screwdrivers.............................................................................38
Drain Cleaners..........................................................................13 Tire Inflators & Gauges........................................................54-55
Eyeshields.................................................................................29 Power Tools
Feeler Gages........................................................................14-15 Drills, Hammers & Drivers....................................................26,29
Files...........................................................................................13 Grinders, Sanders & Accessories................................ 27-29,31-34
Hammers..................................................................................14 Impact Wrenches.................................................................26,36
Knives.......................................................................................10 Saws & Blades................................................................26-27,29
Levels........................................................................................16 Tool Storage Units................................................................16
Measuring Tools..............................................................15,48-51 Vacuums Wet/Dry.............................................................27-28
Picks.........................................................................................13
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Features:
• Engineered to be both strong and compact
• While 1/4” drive ratchets are generally used in low torque applications, Wright ratchets are actually at home in the
world of high torque Features:
• Compact design • Made in the USA with US manufactured steel
• Precision machined 45 tooth action – works in the tightest places • Dropped forged, one-piece handle
• One-piece kit is easily removed for inspection and lubrication • Precision-machined 45 tooth round head
• Contour handle for a comfortable grip provides long life and short swing arc – great
• Meets or exceeds ASME B107.110 for use in tight spots
• Made in the USA Finish: Chrome • Longest one-piece ratchet available in the
Ratchet Type: Single Pawl industry – up to 42”
Overall Length
Item No. Mfr. No. No. of Teeth (in)
Overall
111204030 2426 45 4 3/4 Mfr. Handle Length
Item No. No. Finish Type (in)
110642431 6400 Polished Knurled 24
110642462 6425 Black Industrial Knurled 42
Features:
• Standard round head handles have 41 precision machined teeth Features:
• Double pawl kits used in all handles • Drop forged, one-piece handle
• Comfort grip – nitrile and contour design steel give an exceptionally long life • Handle design allows operator to “feel” the fastener
• Allowing the 41 teeth to operate as an 82 tooth action and a 4 1/2° arc swing, while retaining the longer wearing • Precision-machined 45 tooth head gives long life and
characteristics of 41 teeth short arc swing
• Made in the USA • Kit is easily removed for cleaning or replacement
• Meets or exceeds ASME B107.110
• Made in the USA
Overall Length
Item No. Mfr. No. Handle Type Ratchet Type (in)
111204726 3440a Compact Single Pawl 5 1/2 Finish: Black Oxide
111204717 3426 Knurled Grip Double Pawl 7
Overall
111204716 3425 Long Contour Grip Double Pawl 10 Length
a
Head type: Flex head. Item No. Mfr. No. No. of Teeth (in)
106502183 8425 45 42
Features:
• Made in the USA with US manufactured steel
• Wright ratchets are “workhorses” of the industry Includes:
• Engineered to balance within the normal range of sockets to minimize the “nose-heavy feeling” • 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”,
• Round head double pawl design with 45 teeth provides 4 1/2° swing arc 13/16”, 7/8” sockets
• Greater strength, smoother ratcheting action with minimum effort • Rail
• 10 clips
Overall Length
Item No. Mfr. No. Handle Type (in) Drive
111031939 4426 Knurled 10 1/4 Size
111204751 4490 Contoured 11 Item No. Mfr. No. (in)
110642423 4425 Knurled 15 111204102 378 3/8
2 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Includes:
• 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm,
11 mm, 12 mm, 13 mm, 14 mm sockets 84783
• Rail
• 11 clips
Drive Features:
Size • Full polish SAE and metric 1/4”, 3/8” and 1/2” standard
Item No. Mfr. No. (in) sockets, and 1/4” and 3/8” deep sockets
111204125 256 1/4 • 84 tooth full polish chrome teardrop ratchets, with
flush mounted on/off lever
• Contains six point full polish long pattern combination
84784 wrenches and sockets
• Combination wrenches feature a 15° offset box end for
added knuckle clearance
Features: • Sockets and wrenches feature off-corner loading
• Bidirectional design for removing or tightening design to reduce fastener rounding
damaged fasteners • Universal joints provide additional access to hard-to-
• Tapered entry enables socket to easily seat on a reach fasteners
damaged fastener • Magnetic bit driver with 30 bits, including Torx®, hex,
• Dual sized sockets designed to work with both SAE slotted and Phillips®
and metric fasteners • Extension bars feature a knurled grip, providing a non
12 Piece 12 Point Standard • Square drive with hex base for use with impact gun, slip surface
• Three-drawer storage box with independent sliding
ratchet, wrench or pliers
Metric Socket Set • Chrome molybdenum alloy steel for exceptional drawers, locking side flaps, a steel hinged lid and a
strength and long-lasting durability durable handle
• High-visibility laser etched markings provide quick • Meets or exceeds ASME specifications
size identification
• Black oxide finish to resist corrosion
Includes: • Up to 10x longer impact life vs. other impact Includes:
• 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, extraction sockets • (23) combination wrenches
14 mm, 15 mm, 16 mm, 17 mm, 18 mm, • Up to 5x greater torque output vs. other impact • (47) 1/4” drive sockets
19 mm sockets extraction sockets • (75) 3/8” drive sockets
• Rail • Minus-size sockets fit a wider range of • (31) 1/2” drive sockets
• 12 clips damaged fasteners • (3) universal joints
• (11) extensions
Drive
• (3) ratchets
Size Material: Chrome Molybdenum Alloy Steel • (5) adapters
Item No. Mfr. No. (in) Socket Size Range: 1/4 in to 3/4 in, 7 mm to 19 mm • (1) magnetic bit holding screwdriver handle
• (30) bits with box
111204156 349 3/8
No. of • (14) nutdriver bits
Item No. Mfr. No. Pieces
115120088 84783 15 Item No. Mfr. No.
115120089 84784 28 115715636 80966
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 3
Hand, Power & Analytical Tools
Features:
• Head provides a 3° ratcheting arc to turn fasteners
in narrow spaces
• Torque accuracy of +/- 3% CW in the upper 80% of
wrench capability delivers high performance
• Enclosed ratchet head design resists dirt
infiltration for continuous and efficient execution
• Low profile tube, teardrop head and flush mounted
on/off switch allow better access in tight confines
• Scale markings are highly visible and easy to read
• Knurled aluminum handle lets you grip Features:
comfortably, while clearly marked midpoint • Superior strength from the specially formulated and
promotes additional accuracy heat-treated Crestoloy® alloy steel construction
• 100% steel construction offers lasting strength • Black manganese phosphate finish for extreme
and durability corrosion resistance and smooth ground surfaces to
• Meets or exceeds ASME B107.300 reduce friction
• Exceeds ANSI specifications on load and cycle Features: • 84 tooth ratchet requires only 4.3° of movement,
• Injection molded case with removable lid and EVA • Chrome sockets providing more efficiency and access in tight situations
foam insert for secure storage and convenience • Heat-treated socket bases for durability • Enclosed ratchet head design for improved reliability in
• One-year limited warranty; calibration accuracy and serviceability the harshest environments
warrantied for 90 days • Patented bit-holding principle: internal dimple • Teardrop low profile head and flush mounted lever are
feature forces bit surface to opposite side for up to 21% slimmer than the competition
Finish: Full Polish Chrome maximum retention • Six-point sockets with off-corner loading technology
Torque: 30 to 100 ft lb reduces fastener rounding
• High contrast colored rings on sockets allow you to
Drive Includes: quickly identify between SAE and metric sizes
Size • 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8” • Knurling on the ratchet and sockets gives you better
Item No. Mfr. No. (in) • Plastic rail grip and control in slippery circumstances
115022031 85176 3/8 • Exceeds ASME performance specs
SAE 7 Piece Set • Backed by the Crescent limited lifetime guarantee
1/4” and 1/2” drive available. Contact your local Applied®
service center for more information. Item No. Mfr. No.
101385433 80574
Includes:
• (9) SAE sockets
Includes: • (9) metric sockets
• 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, • 3” extension
9 mm, 10 mm • Ratchet
• Plastic rail
Features:
• Made in the USA with US manufactured steel
Features:
• Wright Drive 12 point design sockets provide up to 10 times more surface
• Full polish chrome sockets with large hard stamp
contact than conventional designs
size markings
• Torque loads are on flats of fastener and away from corners to reduce
• Sockets feature off corner loading design to reduce
rounding, increasing leverage and tool strength
fastener rounding
• Increasing leverage and tool strength
Includes:
• (11) 3/4” drive 12 point standard SAE sockets
• 24 tooth, 19 3/4” quick release teardrop ratchet
• 8” extension
• Metal storage box Includes:
• 7/8”, 15/16”, 1”, 1 1/16”, 1 1/8”, 1 1/4”, 1 5/16”, 1 3/8”, 1 7/16”,
1 1/2”, 1 5/8”, 1 11/16”, 1 3/4”, 1 13/16”, 1 7/8”, 2” sockets
Material: Full Polish Chrome • Ratchet
• 8” extension
Item No. Mfr. No. Item No. Mfr. No. No. of Points
• Flex handle
101649571 80879 • Metal box 111204055 618 12
4 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
24 Piece 3/4” Drive Socket Set
Features:
• Made in the USA with US manufactured steel
56 Piece Socket &
• Wright Drive 12 point design sockets provide up to 10 times Screwdriver Set
more surface contact than conventional designs
• Torque loads are on flats of fastener and away from corners to
reduce rounding, increasing leverage and tool strength
• Increasing leverage and tool strength
Includes:
• 19 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm,
26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 31 mm,
Item No. Mfr. No. No. of Points
32 mm, 35 mm, 36 mm, 38 mm, 41 mm, 42 mm,
46 mm, 50 mm, 54 mm, 55 mm, 58 mm, 60 mm 111204109 624 12
Includes:
• 12 point standard sockets – 1/4”, 5/16”, 3/8”,
7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”,
21 Piece 1” Drive Socket Set 7/8”, 15/16”, 1”
• 6 point deep sockets – 1/4”, 5/16”
• 12 point deep sockets – 3/8”, 7/16”, 1/2”, 9/16”,
Features: 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
• Made in the USA with US manufactured steel • 12 point flex sockets – 3/8”, 7/16”, 1/2”, 9/16”,
• Wright Drive 12 point design sockets provide up to 10 times more surface 5/8”, 11/16”, 3/4”
contact than conventional designs • 8 point standard sockets – 1/4”, 5/16”, 3/8”,
• Torque loads are on flats of fastener and away from corners to reduce 7/16”, 1/2”
rounding, increasing leverage and tool strength • Hex bit sockets – 1/8”, 5/32”, 3/16”, 7/32”, 1/4”,
• Increasing leverage and tool strength 5/16”, 3/8”
• Phillips® screwdriver sockets with bit – #2, #3,
Includes:
#4, 1/4”
• 1 7/16”, 1 1/2”, 1 5/8”, 1 11/16”, 1 3/4”, 1 13/16”, 1 7/8”, 2”, 2 1/8”,
• 3/8” drive ratchet
2 3/16”, 2 1/4”, 2 3/8”, 2 1/2”, 2 5/8”, 2 3/4”, 2 15/16”, 3 1/8” sockets
• 3”, 6” and 12” extensions
• Ratchet
• 3/8” drive flex handle
• 8” and 17” extensions
• Universal joint
• Sliding T
Item No. Mfr. No. No. of Points • Sliding T
• Metal box
• Metal box
111204096 821 12
Drive Size
Item No. Mfr. No. (in)
105463679 348 3/8
9 Piece 12 Point Deep Socket Set
Includes:
• 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”
• Rail
• 9 clips 1/2” Drive 6 Point 13 Piece
Drive Impact Socket Set
Size
Item No. Mfr. No. (in)
111204122 300 3/8
Features:
• Made in the USA
• Patented Wright drive
• 6 point Wright drive tools give you ten times more
fastener contact
• US manufactured steel
27 Piece 6 Point Standard & 29 Piece 12 Point Standard & Includes:
Deep Metric Socket Set Deep Socket Set • 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”,
15/16”, 1”, 1 1/16”, 1 1/8” and 1 1/4” sockets
• (2) 10” rail
• (13) clips
Item No. Mfr. No.
106543118 415
Includes:
Includes:
• 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm,
13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm,
• 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”,
3/4”, 13/16”, 7/8”, 15/16”, 1” standard sockets Still Looking for
19 mm standard sockets
• 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm,
• 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”,
7/8”, 15/16”, 1” deep sockets Something?
• 3/8” drive ratchet
16 mm, 17 mm, 18 mm, 19 mm deep sockets
• 3/8” drive ratchet
• 3” and 6” extensions Visit Applied.com
• 3/8” drive flex handle
• 6” handle for a more
• Universal joint
• 3/8” drive flex handle
• Metal box
• Metal box comprehensive
Drive Size
Item No. Mfr. No. Drive Size Item No. Mfr. No. (in) offering.
111204162 377 3/8 111204178 340 3/8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 5
Hand, Power & Analytical Tools
148 Piece Professional Tool Set
6 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
12 Point Combination Wrench
Features:
• Made in the USA with US manufactured steel
12 Point Combination
• Patented Wright grip design Wrench Set
• 80% stronger than other conventional wrenches
• Additional steel in neck for increased strength
• Serrations inside both jaws for better seating and tighter grip
Finish: Satin
Inch Finish: Flat
Overall
Overall Opening Length
Opening Length Item No. Mfr. No. (in) (in)
Item No. Mfr. No. (in) (in) 111204279 1142 1 5/16 19
111204295 1108 1/4 4 59/64 110515853 1144 1 3/8 20
111204315 1110 5/16 4 59/64 111204281 1146 1 7/16 21 Features:
111204297 1112 3/8 6 111204099 1148 1 1/2 22 • Made in the USA with US manufactured steel
111204290 1114 7/16 6 1/2 111204283 1152 1 5/8 23 • Patented Wright grip design
111204299 1116 1/2 7 5/32 111204284 1154 1 11/16 23 • 80% stronger than other conventional wrenches
111204300 1118 9/16 7 15/16 111204285 1156 1 3/4 25 1/2
• Additional steel in neck for increased strength
• Serrations inside both jaws for better seating and
111204301 1120 5/8 8 35/64 111204286 1158 1 13/16 25 1/2
tighter grip
111204302 1122 11/16 9 1/8 111204287 1160 1 7/8 28
111204313 1124 3/4 10 3/64 111204288 1164 2 28
Finish: Full Polish
111204314 1126 13/16 10 53/64 111204228 1166 2 1/16 28 1/4
Package Type: Denim Tool Roll
111204282 1128 7/8 11 3/4 111204194 1168 2 1/8 28 1/2
111204280 1130 15/16 12 9/16 111204257 1170 2 3/16 28 3/4 Mfr. No. of
111204296 1132 1 13 5/16 111204197 1172 2 1/4 29 Item No. No. Pieces Includes
111204276 1134 1 1/16 14 1/4 111204198 1176 2 3/8 29 1/4 3/8”, 7/16”, 1/2”, 9/16”,
111160506 1136 1 1/8 15 1/8 111204199 1180 2 1/2 29 1/2 111204097 907 7
5/8”, 11/16”, 3/4”
111204277 1138 1 3/16 15 1/8 110973985 1182 2 9/16 29 3/4
3/8”, 7/16”, 1/2”, 9/16”,
111204278 1140 1 1/4 16 13/16 110973986 1184 2 5/8 29 3/4 105429374 911 11 5/8”, 11/16”, 3/4”,
111204274 1150 1 5/8 23 111204200 1188 2 3/4 29 3/4 13/16”, 7/8”, 15/16”, 1”
7 mm, 8 mm, 9 mm,
10 mm, 11 mm, 12 mm,
111204070 950 11
13 mm, 14 mm, 15 mm,
17 mm, 19 mm
Combination Ratcheting Wrench 5/16”, 3/8”, 7/16”, 1/2”,
9/16”, 5/8”, 11/16”, 3/4”,
111204196 915 15
Features: 13/16”, 7/8”, 15/16”, 1”,
1 1/16”, 1 1/8”, 1 1/4”
• Ratcheting box end needs only 5° to move vs. standard 30° for standard
box end wrenches
• Surface Drive Plus™ provides stronger grip on fasteners with up to 25%
more torque Finish: Satin Finish
Package Type: Denim Tool Roll
Finish: Full Polish Finish: Full Polish
No. of Points: 12 No. of Points: 12 Mfr. No. of
Inch Metric Item No. No. Pieces Includes
Overall Overall 10 mm, 11 mm,
Opening Length Opening Length 12 mm, 13 mm, 14 mm,
105419056 751 10
Item No. Mfr. No. (in) (in) Item No. Mfr. No. (mm) (in) 15 mm, 16 mm, 17 mm,
102102514 9008 1/4 4.921 102103777 9106 6 4.921 18 mm, 19 mm
102101519 9010D 5/16 5.508 102141271 9107 7 5.236 3/8”, 7/16”, 1/2”, 9/16”,
102100413 9011D 11/32 5.882 102140374 9108D 8 5.508 111204101 711 11 5/8”, 11/16”, 3/4”, 13/16”,
102146015 9012D 3/8 6.256 102102127 9109 9 5.882 7/8”, 15/16”, 1”
102143362 9014 7/16 6.508 102103776 9110D 10 6.256 5/16”, 3/8”, 7/16”, 1/2”,
102101157 9016D 1/2 7.008 102141270 9111 11 6.508 9/16”, 5/8”, 11/16”, 3/4”,
110973984 715 15
102101840 9018D 9/16 7.504 102101837 9112 12 6.756 13/16”, 7/8”, 15/16”, 1”,
1 1/16”, 1 1/8”, 1 1/4”
102101839 9020 5/8 8.201 102101517 9113D 13 7.008
102101838 9022 11/16 8.878 102140373 9114D 14 7.504 7 mm, 8 mm, 9 mm,
102140379 9024 3/4 9.764 102141155 9115D 15 7.854 10 mm, 11 mm, 12 mm,
111204100 752 15 13 mm, 14 mm, 15 mm,
102100409 9026D 13/16 11.476 102101686 9116D 16 8.201
16 mm, 17 mm, 18 mm,
102101518 9028D 7/8 11.476 102102511 9117D 17 8.878 19 mm, 21 mm, 22 mm
102101687 9030 15/16 13.114 102102512 9118D 18 9.311
102102513 9032 1 13.114 102117737 9119 19 9.764
102117738 9034 1 1/16 14.142 102140372 9120 20 11.476
102142634
102141272
9036
9038D
1 1/8
1 1/4
15.846
16.764
102141154
102140371
9121
9122
21
22
11.476
11.476
Connect with Us!
101493842 9060D 1 5/16 18.110 102103775 9124 24 13.114
101497825 9062D 1 3/8 18.110 102102126 9125D 25 13.114
101486450 9040 1 7/16 19.685 102101836 9127D 27 14.142
101486449 9042 1 1/2 19.685 102141153 9130D 30 15.846
101493841 9044 1 9/16 22.638 102101685 9132 32 16.764
101493061 9046D 1 5/8 22.638 102102125 9134D 34 18.110
101487459 9048 1 11/16 24.213 101495013 9136 36 19.685
101486374 9050D 1 3/4 24.213 101493062 9141D 41 22.638
101487460 9052D 1 13/16 25.394 101493844 9146D 46 25.394
101496490 9054D 1 7/8 25.394 101485973 9150 50 25.787
101493843 9056D 2 25.787
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 7
Hand, Power & Analytical Tools
Ratcheting Box Wrench Set
Lower Storeroom
Operating and
Inventory Costs
Adjustable Wrench
Ask your Applied®
representative about our
Storeroom Services Program Overall
Capacity Length
and how we can help you Item No. Mfr. No. (in) (in)
efficiently identify, organize, 111203865 9AB04 1/2 4
optimize and manage 111203864 9AB06 15/16 6
111203863 9AB08 1 1/8 8
your inventory. 110396063 9AB10 1 3/8 10
111203834 9AB12 1 1/2 12
111203794 9AB15 1 11/16 15
111203847 9AB18 2 1/8 18
111203806 9AB24 2 17/32 24
8 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Strap Wrench Heel Jaw &
Pin Assembly
Features:
• Best for any polished pipe
• Strong, woven nylon strap gives tight grip
• Polyurethane coated strap
Pipe Capacity Tube Capacity Strap Length Strap Width Handle Length
Item No. Mfr. No. (in) (in) (in) (in) (in) Wrench Size
Item No. Mfr. No. (in)
102215653 31340 2 3 1/2 17 1 1/8 11 3/4
101508505 31360 5 7 29 1/4 1 3/4 18 101498152 31700 24
102147427 31365 5 12 48 1 3/4 18 101499217 31725 36
101501086 31750 48
Features:
• Nearly 50% lighter than comparable cast-iron Features:
models of the same size • Aluminum handle makes wrench 40% lighter than
• Features a jaw opening parallel to the handle and a malleable iron wrenches
narrower hook-jaw head, which provides easy entry • Easy, one-handed operation Features:
into tight spots • Ideal for jobs in close quarters • Hex-jaw design gives multi-sided, secure grip on all
hex nuts, square nuts, unions and valve packing nuts
• Ideal for securing drain nuts on sinks and tubs
Capacity Length
Item No. Mfr. No. (in) (in) Nominal Pipe
102220966 31120 2 14 Mfr. Model Size Capacity Model Capacity Length
101483426 31125 2 1/2 18 Item No. No. No. (in) (in) Item No. Mfr. No. No. (in) (in)
101485223 31130 3 24 101515073 90117 E914 14 2 101498863 31305 E110 1 1/8 to 2 5/8 9 1/2
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 9
Hand, Power & Analytical Tools
Micro-Adjustable “Click Type” Metal
Handle Torque Wrench
Auto Retract
Flex Handle Extension Utility Knife
Features:
• Meets or exceeds ASME B107.110
• Made in the USA Finish: Chrome
Features:
• Steel pin and tension washer construction for Socket Overall
extra strength Drive Size Length
Item No. Mfr. No. (in) (in) Features:
• No binding or locked joints
• Blade retracts automatically the moment it loses
• Meets or exceeds ASME B107.110 111203962 2402 1/4 2 contact with the material being cut
• Made in the USA 111203963 2404 1/4 4
Finish: Chrome • Helps reduce workplace injuries
111203964 2406 1/4 6 • Accepts all standard type utility blades
111204741 3402 3/8 1 1/2 • Quick blade change
Drive Overall
Size Length 111204742 3403 3/8 3 • Includes three coated blades
Item No. Mfr. No. (in) (in) 111204743 3405 3/8 6
111204031 2435 1/4 5 111204720 3408 3/8 8 Length Blade Length
111204713 3412 3/8 12 Item No. Mfr. No. (in) (in)
111204723 3435a 3/8 8 15/32
111204715 3424 3/8 24 113454391 WKAR2 8.9 1
a
Handle type: Knurled.
10 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Features:
• Heat-treated steel “circlip” pliers for large equipment repair
10” Titanium Coated Full • Replaceable tips and spring ratchet locking mechanism to securely hold
Metal Scissors against snap ring tension
• Internal plier’s capacity 3 1/16” to 6 1/4” (78 mm to 159 mm) snap rings
• External plier’s capacity 3 1/2” to 6 1/2” (89 mm to 165 mm) snap rings
• Blow-molded storage case includes extra sets of replaceable 0.12” (3 mm)
dia. tips: straight, 45° and 90°
Specifications Closed
Length
Series HO Series BHO Series VHO Series HOI Closed Tip Standard
Ring Size Ring Size Ring Size Ring Size Width Dia. Tip
Long Nose Pliers Mfr. No. Range Range Range Range Item No. Mfr. No. (in) (in) (in)
RPS-100 25-31 25-31 - 62 101464522 RPS-100 1 7/8 0.025 5 1/2
RP-100 37-56 37-56 - 75-100 101464632 RP-100 1 7/8 0.038 5 1/2
RPL-100 62-102 62-102 100-102 106-137 101469291 RPL-100 1 7/8 0.047 5 1/2
RP-300 106-175 106-175 106-175 143-200 101464515 RP-300 2 1/4 0.070 6 7/16
RP-500 181-300 - 181-300 206-300 101464777 RP-500 2 1/4 0.090 9
Features:
• Crosshatch pattern on jaws grips work tightly
• With side cutter
• Only CHANNELLOCK® uses a knife and anvil style
cutting edge to ensure perfect mating and superior Standard External Retaining Ring Pliers
cutting edge life
• CHANNELLOCK® uses high carbon C1080 steel
for superior performance on the job and specially Features:
coated for ultimate rust prevention • High carbon
• CHANNELLOCK BLUE® grips for comfort • Heat-treated steel
• Made in the USA • Stop and return springs
• Air-cushioned handles
Overall • Complies with RoHS restrictions on the use of certain hazardous substances in
Jaw Length Length electrical and electronic equipment
Item No. Mfr. No. (in) (in)
Specifications
111193086 326 2.08 6 Closed
111193292 318 2.30 8 1/2 Series Series Series Series Series Length
SH Ring BSH VSH SHI Ring SHR Closed Standard
111193083 317 2.36 8
Size Ring Size Ring Size Size Ring Size Width Tip Dia. Tip
Mfr. No. Range Range Range Range Range Item No. Mfr. No. (in) (in) (in)
RP-18 18-23 — — — — 101463969 RP-18 1 1/2 0.023 5.278
RP-200 25-66 25-66 — 50-78 39-47 101470331 RP-200 2 1/2 0.038 5 1/2
RP-400 93-143 93-143 100-143 106-200 — 101470931 RP-400 2 7/8 0.070 7
2 Piece Double-X™ Pliers Set RP-600 150-350 150-175 150-350 215-325 — 101471253 RP-600 4 1/4 0.115 9 1/8
Features:
• Aligned, serrated tips for precision gripping
• Flush rivet for strength and narrow profile
• Compound joint allows access with minimal
handle movement Features: Jaw Overall
• Jaws open greater distance than the handle for • CHANNELLOCK BLUE® grips for comfort Capacity Length Length
added reach in tight locations • Undercut tongue and groove design won’t slip Item No. Mfr. No. (in) (in) (in)
• Dual-dipped handle for comfort and grip • Right angle, laser heat-treated teeth grip better and 111193072 424 1/2 0.33 4 1/2
• Corrosion-resistant alloy steel last longer 110375569 420 1 1/2 1.12 9 1/2
• Maximum reach without exceeding center point • Patented reinforcing edge minimizes stress breakage 111193080 430 2 1.38 10
of interference • CHANNELLOCK® uses high carbon C1080 steel for
101868542 440 2 1/4 1.50 12
superior performance on the job and specially coated
for ultimate rust prevention 110553578 460 4 1/4 2.56 16 1/2
Item No. Mfr. No. Plier Type 111193076 426 0.87 0.81 6 1/2
• PermaLock® fastener eliminates nut and bolt failure
101374909 82106 45° & Straight • Made in the USA 111192917 480 5 1/2 3.00 20 1/2
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 11
Hand, Power & Analytical Tools
Features:
• PowerPivot™ technology for superior cutting power
• Double compound cutting action
• Precision engineered induction hardened center
cut blades
• Heat treated for wear resistance and long cutting life
• Tubular steel handles for ultimate strength and
cutting support
• Screw type adjustment for blade gap and alignment
• Cuts materials up to Brinell 455 or Rockwell C48
hardness
• NEVER use any H.K. Porter cutters on energized
circuits, wire or cable
Length
Search Shop Find Item No. Mfr. No. (in)
Products Trusted Brands Solutions 114987244 1490MCP 14
114987241 0090MCP 18
114987239 0190MCP 24
114987238 0290MCP 30
12 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
No. 418 Oiler
Enclosed Feed Tubing Cutter Features:
• 50% more oil per stroke than other
POWER SPIN+ with AUTOFEED®
Telescoping feedscrew keeps the cutter the same hand-held oilers
length overall – great for tight spaces. • Ergonomic, two-finger trigger
design reduces user fatigue
• Die cast, heavy-duty body with
Features: swivel nozzle, no exposed parts
• Enclosed feedscrew • Patent pending, fastenerless,
to eliminate clogging twist-and-lock drip pan easily locks
and jamming in place
• Grooved rolls for • New material withstands
close-to-flare cuts abrasion, is lighter than metal Features:
• Fold-away reamer and does not rust • Cleans drain lines from 1/2” to 1 1/2” in diameter
• Made from high strength • New reservoir will not crack or leak • Kink-resistant MAXCORE® cable is designed for drill
zinc alloy • New material is strong; under normal use, no powered operation up to 500 rpm
• Spare cutter wheel in dents on impact or shape changes will occur • AUTOFEED® trigger technology allows cable to
the handle • Drip fits squarely on reservoir time after time self-feed down the drain
• Integral molded body eliminates leaks at • Cable is positively retained in the drum to prevent
Reamer: Fold-away hose-reservoir connection cable pullout
Feed Screw: Enclosed • Pull the trigger and turn the drum for a clean drain
Used To Cut: Aluminum, Brass, Hard Capacity without the mess
Copper, Soft Copper, Thin Wall Conduit Item No. Mfr. No. (gal) Use With
Spare Cutting Wheel: Yes 101881587 10883 1 Cutting Oil
Drain Line
Capacity Capacity Cable Length
Item No. Mfr. No. Model No. (in) Item No. Mfr. No. (in) (ft)
101500534 31622 150 1/8 to 1 1/8 Thread Cutting Oil 116129006 57043 1/2 to 1 1/2 25
Features:
• Cools threads and pipe
during operation
• Speeds metal removal
• Improves thread quality
• Reduces threading torque O-Ring Seal Pick
Model 700 Power Size Features:
Drive / Hand-Held Threader Item No. Mfr. No. (gal)
• Easily and quickly
101509404 74012 1 remove and install oil
Features: seals and o-rings
• Heavy-duty hand-held • Tough plastic shafts
power drive Nu-Clear Thread
• Features a reversible Cutting Oil Item No. Mfr. No. No. of Pieces
universal motor
Features: 100605674 7312 1
• Designed for RIDGID®
12-R die heads • Clear mineral oil with low odor and 100605656 7103 2
• CSA approved anti-mist formulation
• UL® standards approved • Free of chlorine and other
halogens, PCBs and heavy material
Mfr. Model Capacity • Low temperature properties
Item No. No. No. (in) Voltage maintain workable viscosity to
101503117 41935 700 1/8 to 2 115 -20 °F
• Cools threads and pipe during
operation
• Speeds metal removal
Size
2 in 1 Flat Bastard and Smooth File
Item No. Mfr. No. (gal)
101501914 70835 1
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 13
Hand, Power & Analytical Tools
B.A.S.H.™ Unbreakable Handle Sledge Hammer
Features: Indexing Pry Bar
• The world’s most durable sledge hammers
• Unbreakable technology – Steel core eliminates breaking and can withstand
over 25,000 overstrikes Fixed Length
• Safety plate – Secures head to handle, preventing head dislodging
• No-slip grip – Vulcanized rubber handle for secure grip while striking
• Anti-vibe neck – Thick, tapered neck absorbs vibration, reducing worker fatigue
Extendable Length
• Hi-vis head – Drop forged 46 HRC steel head endures the most demanding applications
• Reinforced lanyard hole – Safely secure hammer to wrist or stationary object Features:
• Lifetime warranty • Get more access and leverage with the complete
• Meets ANSI specifications Color: Hi-Vis Green indexing pry bar family of product
Grip Style: Vulcanized Rubber • Patented indexing gear allows for an adjustable
Face Material: Carbon Steel head of 14 different angles and 180° rotating head
• All sizes exceed industry standards specifications
Handle Length Head Wt. Height Width Wt. by a minimum of two times
Item No. Mfr. No. (in) (lb) (in) (in) (lb)
101691565 20212 12 2 1/2 2 4 3 1/2 Length
101693741 20412 12 4 2 1/2 5 5 Item No. Mfr. No. (in)
101683967 20416 16 4 2 1/2 5 6 101492029 82208 8
101691174 20624 24 6 3 5 8 101417360 82210 10
101690300 20824 24 8 3 6 8 101419787 82216 16
101691534 21224 24 12 3 6 10 101452001 82220 18 to 29
101690302 21024 24 10 3 6 8 1/2 101513595 82224 24
101683966 21030 30 10 3 6 13 101650746 82248 29 to 48
101702958 20630 30 6 3 5 10 101516225 82233 33
101691566 20830 30 8 3 6 11
101693743 21230 30 12 3 6 13
101690301 21430 30 14 3 7 14
101693742 20636 36 6 3 5 14
101736624 20836 36 8 3 6 15
® ®
101703029 21036 36 10 3 6 16
101690240 21236 36 12 3 6 17
101693508 21436 36 14 3 7 18
Plastic Fan Blade Thickness
101703031 22036 36 20 3 7 24 Gage Assortment
WARNING: Cancer - www.P65Warnings.ca.gov. Set Contents for 78900 & 78905
Size (in) Color
Fan Blade Plastic
Thickness Gages
0.0010 Amber
Jimmy Bar Indexing Pry Bar 0.0015 Purple
0.0020 Red
0.0030 Green
0.0040 Tan
0.0050 Blue
0.0075 Matte
Features: Features: 0.0100 Brown
• Forged from chrome alloy steel • Contains 13 blades 0.0125 Black
• Heat-treated to resist bending and breaking riveted together for
0.0150 Pink
on-site convenience
0.0200 Yellow
Tip Size Length • Made of the highest
Item No. Mfr. No. (in) (in) quality plastic material 0.0250 White
114740291 7421A 1 54 • 1/2” wide blades are 0.0300 Coral
Features:
110519365 7167 3/4 24 • Indexible to 180° for better access available in 5” and
100605665 7166 5/8 18 • 14 locking positions for leverage in 12” lengths
111003679 7168 7/8 30 multiple applications • Color indicates thickness
100605683 7420 7/8 46 • Knurled handle assures a sure grip • Packaged in a sturdy, vinyl case
• Meets or exceeds ANSI specifications for prybars • Noncorrosive, nonconductive, nonsparking
and nonmarring
Material: Polyester/Vinyl
Length
Item No. Mfr. No. (in) Length No.
104107674 7172 10 Item No. Mfr. No. (in) of Blades
Pry Bar 104126826 7173 12 102041571 78905 5 13
104104401 7174 15 102015936 78900 12 13
Features:
Connect with Us!
• Rolling head for great leverage
• Long-tapered body may be used as a lining-up drift
Length
Item No. Mfr. No. (in)
100605662 7163 12
100605663 7164 16
100605664 7165 18
14 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
® ®
Steel Poc-Kit® Feeler Gage Assortment
Set Contents for 19G20 Set Contents for 19G40
Size (in) Size (in)
5 in Poc-Kit® 12 in “The Big” Poc-Kit® Shockforce™ Tape Measure
Feeler Gages Feeler Gages
0.001 0.001
19G20 0.0015 0.0015
0.002 0.002
0.003 0.003
0.004 0.004
0.005 0.005
0.006 0.006 L1125 L1125B
0.007 0.007
Features:
0.008 0.008
• Extruded nylon blade coating provides best-in-class
0.009 0.009 blade protection
0.010 0.010 • Two-sided blade with vertical markings on the back
0.012 0.012 for quicker and easier measuring
19G40 0.014 0.014 • 25’ tapes have an even 3” adder, making inside
0.015 0.015 measurement calculations fast and easy
Features: 0.016 0.016 • 360° end hook grips surfaces better to save time
• Packaged in a sturdy, vinyl case 0.018 0.018 when measuring
• Individual blade pockets 0.020 0.020 • Integrated thru-hole can be used as a tether loop
• Conveniently folds flat 0.022 attachment point when working at height or as a
0.022
• 1/2” wide blades are available in 5” and 12” lengths pivot for scribing arcs
0.024 0.025
• Each blade is clearly etched with size in metric • Dual metal guardrails on both sides of the lock
and decimal 0.025 0.030
button provide superior protection to keep this tape
• Ends are rounded and edges are smooth for safety going strong on the toughest job sites
• Vinyl case helps prevent rust and extends blade life • L1125B has high contrast green markings with
• Complies with ASTM A-682 a matte finish to provide improved legibility in
Material: High Carbon Spring Steel
all light conditions
Length
Item No. Mfr. No. (in) No. of Pieces Blade Width: 1 3/16 in
Blade Length: 25 ft
101391068 19G20 5 20
101391144 19G40 12 20
Item No. Mfr. No. Blade Type
Yellow Blade w/ Black
115478634 L1125
Markings
Black Blade w/ Hi-Viz
Compact Tape Measure 115478637 L1125B
Green Markings
Features:
• Nylon bond blade protection
• Five-point reinforced frame
• Fractional scale
• Optimized hook designed for scoring
• Stamped steel belt clip
• Lanyard ready
Atlas® / Nubian® Double Duty Oil
Blade Gauging Measuring Tape
Length Blade
Item No. Mfr. No. Color (ft) Lockable Inch/Metric Material
114180274 48-22-6625 Red / Black 25 Yes Inch Steel
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 15
Hand, Power & Analytical Tools
Tradesman Open Top Tool Bag Tradesman Closed Top Tool Bag
True Blue® Box Level
Features:
• Reinforced vial locking system secures acrylic block
Features: Features: vials and delivers long life accuracy
• Professional grade open top bag is ideal for everyday • Professional grade closed top bag is ideal for everyday • Tool-free removable, shock absorbing endcaps provide
use in rugged conditions use in rugged conditions superior protection and scribing performance
• 17 interior and eight exterior pockets line the bag, so • Three exterior pockets and a 29-pocket interior tool • Precision milled edges for guaranteed accuracy
you can keep your equipment in order wall provide additional organization, with pocket • Surface grippers prevent the level from sliding on flat
• Hard polypropylene base resists moisture and sleeves to easily access small pieces or angled surfaces
withstands impacts, delivering lasting durability • Hard polypropylene base resists moisture and • Ergonomic grip zones enhance comfort and portability
• Bright orange interior helps you find your tools faster withstands impacts, delivering lasting durability (48”+ only)
in darker environments • Bright orange interior helps you find your tools faster • High contrast e-BAND™ vials highlight the edge of
• Made with 1680D polyester and metal hardware to in darker environments the bubble
withstand the toughest jobsite • Made with 1680D polyester and metal hardware to • 300° viewing window maximizes range of view
• Two exterior pocket sleeves help you easily retrieve withstand the toughest jobsite • Hang hole for ease of storage
small parts, such as sockets or screws • 13 PALS on the outside of the bag provide tool • Powerful rare earth magnets provide superior holding
• Center metal handle meets durability standards and storage slots for quick, easy access to your strength (magnetic models only)
provides comfort while carrying the bag from frequently used tools • 0.0005” accuracy in all working positions
job to job • Pocket sleeves hold the tools in place without losing • Limited lifetime warranty
• Adjustable, padded shoulder strap and padded nonslip small bits in the pockets
bar handle make carrying the bag more comfortable • Adjustable, padded shoulder strap and padded nonslip
• Top-quality YKK zipper comes with a three-year bar handle make carrying the bag more comfortable
warranty and an oversized pull for added convenience Body Material: Aircraft Aluminum
• Includes a water bottle holder and a tape measure clip Vial Material: Acrylic
Material: Polyester for added convenience
Handle Included: Yes • Top-quality YKK zipper comes with a three-year Mfr. Length Height Thickness
warranty and an oversized pull for added convenience Item No. No. (in) (in) (in)
Width Height 112921338 E75.24 24 2 3/4 1 1/8
Item No. Mfr. No. (in) (in) Material: Polyester 112921339 E75.32 32 2 3/4 1 1/8
115715036 CTB1710 11 16 Handle Included: Yes 112921340 E75.48 48 2 3/4 1 1/8
Tradesman Backpack
Features:
• Professional grade backpack
is ideal for everyday use,
with an adjustable front
pocket to hold large items
like electrical cords em81 Series Heavy-Duty Magnetic
• Four exterior pockets and 34
interior pockets for all parts I-Beam Level
as well as exterior pockets
for the frequently used tools
• Hard polypropylene base is moisture resistant
and stands up to tough environments for We Are…
long-lasting durability
• Bright orange interior helps you find your tools faster
Features:
All Things Industrial®
in darker environments
• Made with 1680D polyester and metal hardware to • True Blue® vials are accurate to within 0.0005’’ per
withstand the toughest jobsite inch in all 10 level and plumb working positions
• Pocket sleeves hold the tools in place without losing • Super strong anodized aluminum I-Beam frame with Learn More:
small bits in the pockets milled edges for accuracy
• Specialized magnetic pocket stores items for • Strong holding magnetic edge Applied.com/about
quick access • Shock absorbing endcaps protect the frame
• Ergonomic handle is easy to grab and provides a • Top reading window
comfortable, nonslip grip • Dropped edge for added rigidity
• Includes a water bottle holder and a tape measure clip
for added convenience
• Top-quality YKK zipper comes with a three-year Color: Black
warranty and an oversized pull for added convenience Body Material: Aluminum
Magnetic: Yes
Material: Polyester
Handle Included: Yes Mfr. Length Height Thickness
Item No. No. (in) (in) (in)
Item No. Mfr. No. Height (in) Width (in) 111944586 EM81.9 9 3 7/8 3/4
115715037 CTB1750 16.7 9 1/2 111944578 EM81.10 10 3 7/8 3/4
16 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
XF45 Quick Acting Vise
Forged Super-Junior® C-Clamp The XF45 quick acting vise combines the strength and durability of forged steel with the time and effort savings of a
new quick action trigger. Traditional bench vises rely solely on hand cranks to tighten and loosen an object. The XF45
vise includes an innovative quick action trigger to quickly clamp and loosen objects. By just flipping the quick action
trigger, the jaws easily slide into the desired position. This trigger significantly reduces time and effort when working
with bench vises. This is the perfect tool for professionals who rely on their bench vise on a daily basis.
Features:
• Quick action trigger allows user to effortlessly slide jaws in and out to easily adjust
for different-sized objects
Features: • Forged steel construction offers superior durability and strength
• Super-Junior® clamps are forged steel with heat • Patented Jaw Alignment System provides precise clamping, longer service life
treated frames to provide a much stronger clamp than • Large capacity, forged pipe jaws clamp pipe and rod securely
pressed steel or malleable clamps • 360º forged steel swivel base allows for infinite amount of adjustability
• Steel screws are zinc-plated for longer life • Oversized, hardened jaws and anvil provide greater clamping and working surfaces
• Lifetime warranty • Steel handle with anti-pinch rings offers increased strength, eliminates pinches
• Light-duty clamping
• Pattern and mold making Jaw Opening Jaw Width Throat Depth
Material: Forged Steel Item No. Mfr. No. (in) (in) (in)
101511451 26648 6 4 1/2 3
Opening Throat
Capacity Depth
Item No. Mfr. No. (in) (in)
101629037 21301 1 1
105152258 21302 1 1 1/2 Shop Vise
105146402 21303 1 1/4 1 1/4
101635246 21304 1 1/2 1 1/2
101641814 21305 2 1 1/4
Features:
• Rubber pinch point safety guards
105142109 21307 2 1/2 2 1/2
• Heavy-duty 25,000 psi casting for strength and durability
101641815 21306 3 1 3/8 • Replaceable top jaws and built-in pipe jaws
WARNING: Cancer and reproductive harm - • 360º swivel base with double lockdown for quick and easy positioning
www.P65Warnings.ca.gov. • Built-in pipe jaws handle various pipe sizes
• Large anvil work surface
• Designed for general-duty use
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 17
Hand, Power & Analytical Tools
Mechanics Vise
Features:
• Swivel base rotates 360° and has double lockdowns, ensuring maximum stability
• Powder coat paint resists scratches and provides a tough durable finish
• Replaceable hardened steel top and pipe jaws
• Large anvil work surface
A newly updated Two Ton Aluminum Racing Service with added features to lift faster, higher and be easier to use. The lightweight, 41 pound jack includes side
handles for easy transport and loading into a truck for mobile service calls. Quick lift design gets vehicles in the air quickly with fewer pumps. New and improved
hydraulics and a wider track for the wheels make it durable and easy-to-use. A 4 ft padded lower handle protects rocker and door panels while providing
maximum leverage to lift vehicles to a maximum of 18.5”. Rubber saddle protects vehicle undercarriage and prevents slipping. Saddle can be removed for lower
profile to get under road-hugging vehicles as low as 3.4”. Cycle tested design for a long life of professional duty. Ideal size for compact and midsize sedans and
small SUVs. Meets all 5 ASME PASE-2019 safety standards for service jacks. Limited lifetime warranty.
18 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Jack Stands
Features:
• Flat base provides stability when holding vehicles
• Durable baked enamel finish resists corrosion
• Clear multilingual safety and capactiy markings
• Meets ASME PASE-2019 safety standards
• Multi-lingual OTC owners manual for stands with training (operating) instructions
• Limited lifetime warranty
Features:
• New 10” capacitive LCD touch screen and intuitive user interface makes navigation much easier and beginning service quicker
• Incorporated wi-fi and bluetooth wireless technology enable many new features and capabilities making this the most advanced A/C RRR machine on the
market today
• Automatic updates ensure your machine always has the most current software, as well as access to new features and capabilities as they become available
• Service data management and machine metrics can be retained and stored allowing for proactive service reminders, refrigerant use tracking and reporting or
recalling prior vehicle services performed by the ACS machine
• Fully automatic function allows user to program to recover, vacuum, leak test and charge without operating panel valves, or run functions independently as
specific service functions are needed
• Automatic Refrigerant Refill maintains a user-selected amount of refrigerant in the internal vessel and signals when it’s time to change new supply tank, no
monitoring of refrigerant level is required
• Network printing capability allows technician to print a detailed services provided report for the customer
• Utilize Robinair Bluetooth accessory devices for further optimization of A/C service, enabling automation and data gathering during service to accurately
diagnosis and service the vehicle
Hose
Length Filer-Drier Internal
Item No. Mfr. No. (ft) Capacity Cylinder Certification
117215512 AC1234-9 9 330 lb, Spin-On Type 30 lb, DOT; 21 lb capacity SAE J2843, J2927, UL 1963
117215431 34998 9 150 lb, Spin-On Type 30 lb, DOT; 22 lb capacity SAE J2788, UL 1963
WARNING: This product can expose you to chemicals including lead acetate, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 19
Hand, Power & Analytical Tools
Cord Length Depth Length Width Weight Min. Pipe Capacity: 1/8 in
Item No. Mfr. No. Amps Bollards Voltage (ft) (in) (in) (in) (lb) No. of Legs: 3
117575161 EL-50600-D 30 - 95 to 264 VAC 18 4 14 5 14 Max. Pipe
117575162 EL-52503 12 to 32 - 175 to 264 VAC 25 9 7.3 2.8 12 Capacity
117575173 EL-50650-GNT-B 12 to 32 Single 96 to 264 VAC 23 7.2 58 7.2 125 Item No. Mfr. No. (in) Type
117575174 EL-50650-GNTD-A 12 to 32 Double 96 to 264 VAC 23x2 7.2 58 7.2 150 102065633 16703 2 1/2 Chain
101703624 36273 12 Tripod
Pilot Bearing
Puller
Bench Chain Vise
Applications:
Features: • Inside pulling jobs
• Crank handle is anchored to base • Flywheel pilot bearings
• Rugged, cast iron base has handy pipe rest and bender • Motors
• Two models available for plastic pipe • Generators
• Toothless jaws are neoprene-coated to prevent scoring pipe • Magneto bearings
20 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
*
Mechanical Jaw Puller Reversible Jaw Puller
Reversible jaw pullers grip on both the outside as well as the inside of a component
Features: Applications: with equal strength.
• Forged steel • Gears
Features:
• Heat treated • Bearings
• Internal and external pulling
• Rolled forcing screw threads
• Self-locking arms
• Heat-treated alloy steel cross bolts
• Hardened carbon steel
• Machined puller jaw toes
• Corrosion resistant
• Special safety neck avoids damaging of thread and arms
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 21
Hand, Power & Analytical Tools
Features:
• Removes and installs press-fit parts
• Can be used with no. 1123 bearing pulling attachment or
no. 679 pulley pulling attachment Applications: Pkg. Qty.: 2
• May also be used with no. 1150, 1151, 1152 or 1153 • For use with 10 ton capacity Push-Puller®
internal pulling attachments (Mfr. No. 927) Thread - Lower: 5/8-18 x 5/8”
Thread - Upper: 1/2-20
Length
Reach Spread Item No. Mfr. No. (in)
Item No. Mfr. No. (in) (in) 100601434 1103 4 3/4
101355079 927 8 1/4 2 1/8 to 7 1/4 110956759 1100 6 3/4
100601430 1102 11 3/4
Applications:
• For use with 17 1/2 ton capacity Push-Puller® Thread - Lower: 5/8-18 x 1”
(Mfr. No. 938) Thread - Upper: 3/4-16
Length
Item No. Mfr. No. (in)
17 1/2 Ton Mechanical Push-Puller® 100601438 1106 9 1/2
100601435 1104 16 1/2
Portable steel press for field or maintenance jobs used for
removing or replacing bearings, gears, pinions, pulleys,
wheels or bushings.
Set Contents for 938
Mfr. No. Desc. Qty.
Blind Housing Puller Kit
Accessories
1106 9 1/2 in Legs (4 1/2 lb/pair) 2
Easy dismounting of ball bearings in blind housings. The SKF TMMD 100 is specially
designed to allow easy and quick dismounting of deep groove ball bearings with
24827 Leg End Caps 2
interference fit on both rings. The puller is suitable for use in both blind housings
- Forcing Screw 1 and shaft applications. In addition to dismounting open bearings, the TMMD 100 can
- Forcing Nut 1 be used to dismount sealed bearings after the removal of the seal. The TMMD 100 is
Features: - Cross Block 1 suitable for dismounting up to 71 different SKF deep groove ball bearings from shaft
• Operates with either - Sliding Plate 2 diameters, ranging between 10 to 100 mm (0.4 to 3.9 in).
pushing or pulling - Washers 3
force, depending Features:
on setup • Claws are specially designed to facilitate a precise fit in
• Reach equals leg bearing’s raceways, providing good grip and allowing
Max Min Max
length plus 2” with Mfr. Capacity Reach Spread Spread
application of higher dismounting forces
leg end caps threaded Item No. No. (tons) (in) (in) (in) • Each puller arm is fitted with a spring for
5/8-18 easy installation
100605831 938 17 1/2 11 1/2 3 1/8 11 3/4 • Puller arms are made of single-piece, laser-cut,
hardened steel for strength and longevity
• Arm sizes 4, 5 and 6 are fitted with filling plates to
accommodate a wide range of bearings
• Spindle’s hexagon head is equipped with an antislip
pin, which prevents spanner from sliding down spindle
during dismounting
• Claw’s rotation angle is limited to allow easy installation
• Designation is laser engraved on arms, allowing easy
Grip-O-Matic Puller identification and selection
Max.
Reach Reach Spread Range
Item No. Mfr. No. (in) (in) (in)
101170638 TMMD 100 5.3 6.7 0.4 to 3.9
Features:
• Remove and install parts for
fast, effective repairs
• Forged from quality steel,
heat treated and subjected to
22 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Multi-Purpose Bearing & Pulley 7 Ton Bar Type Puller/Bearing
Puller Set Separator Set
This set includes drop forged Set Contents for 4534 Separator tools are used with bar puller and legs for a wide variety of pulling jobs.
components that can be used in a
Desc. Qty.
variety of combinations for a wide
range of pulling jobs. Forcing Screws (Live Center)
3/4 in - 16 x 6 11/16 in 1
3/4 in - 16 x 5 in 1
Cross-Bar Yokes
3 pin-hole @ 3 1/4 in to 5 1/2 in 1
2 pin-hole @ 2 3/8 in to 3 3/8 in 1
Puller Jaws
1 3/8 in Max. 1
1 5/8 in Max. 1
1 3/4 in Max. 1
Accessories Spread
Clamp Bolts 2 Item No. Mfr. No. (in) Includes
Jaw Pins with Ball Spring 1 pr. Bearing splitter with 4” capacity
Capped Bolts 3 pr. Two sets of hex push puller legs
105627288 4517 4 to 8
Blow-molded Plastic Storage Case 1 8” bar type puller head mated with a
custom thread forcing screw
Max. Reach Min. Spread Max. Spread Two sets of forged jaws for a pulling
Item No. Mfr. No. (in) (in) (in) reach range of 5” to 9”
105627291 4532 7 to 11
101535802 4534 2 1/4 3 5 Two forcing screws are included for
short and long pulls
All tools are contained in a rugged, lockable, metal storage cabinet you can either
mount on a wall or stand on a workbench so they are handy when you need them.
Set Contents for 1676
5 Ton Bar Type Puller/Bearing
Separator Set
Mfr. No. Desc.
1026 2/3 in Jaw Puller Separator tools are used with bar puller and legs for a wide variety of pulling jobs.
1037 2/3 in Jaw Puller
7393 Gear & Pulley Puller
518 Flange Type Puller Set Contents for 4518
7403 Steering Wheel Puller Desc.
1170 Pilot Bearing Puller 2 in Bearing Splitter
1177 Slide Hammer Puller 3 in Bearing Splitter
7311A Pitman Arm Puller Hex Push-Puller Legs (Qty. 4 Sets)
1122 Bearing Splitter Bar-Type Puller Head with 9/16 in Forcing Screw
1123 Bearing Splitter 5 in Puller Cross-Bar with 6 1/4 in Forcing Screw
7372 Rear Axle Pulling Adapter Accessories
43888 Long Jaws for 1026 (3)
Blow-molded Plastic Storage Case
43892 Long Jaws for 1037 (3)
18886 Metal Storage Box
Spread Range
Max. Reach Spread Range Hammer Wt. Item No. Mfr. No. (in)
Item No. Mfr. No. (in) (in) (lb) 101535064 4518 1/4 to 2
111342821 1676 7 1/2 5 to 10 1/2 5
For pulling jobs requiring an internal pull. Select the appropriate-sized collet by
comparing it with the application. Insert the collet, expand it to fit the hole, then attach Basic Slide Hammer Unit
the slide hammer assembly.
Set Contents for 4581
Size (in)
Collets
7/16 to 1/2
9/16 to 11/16
5/8 to 1
1 to 1 1/4 Features:
Accessories • Threaded ends are 5/8” x 18”
2 1/2 lb Slide Hammer with T-Handle • Recommended for use with OTC pulling attachment
Blow-molded Plastic Storage Case
Hammer Wt. Length
Item No. Mfr. No. Item No. Mfr. No. (lb) (in)
101532291 4581 100601522 1155 5 24
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 23
Hand, Power & Analytical Tools
Ten Way Slide Hammer Puller Set TMFN Impact Spanner Wrench
Features:
Jaws can be set up for two- or three-way internal or external pulling jobs. Pull-flange • Minimizes the risk of shaft and nut damage
type near axles, oil seals, bearings and other press-fit parts.
Applications:
Set Contents for 7948 • Tighten and loosen lock nuts
Mfr. No. Desc. • Secure and adjust larger bearings directly on shaft
1155 Slide Hammer with 5 lb. Hammer or with adapter and withdrawal sleeves
7372 Rear Axle Pulling Attachment
24544 Three-Way Cross-Head Set Contents for TMFN Series
24545 Cone
For Series For For
27241 Two-Way Cross Block SNW, H 23, H Series Series For For For
27315A Puller Hook Attachment 31, H32, H 39 KM HMT Series Series Series For
Pulling Jaws for Internal or External Adapter Nut Nut HMLT HM 30 AN, N Series N
34698 Mfr. No. Sleeve Size Size Size Nut Size Nut Size Nut Size Nut Size
Pulling Jobs (Qty. 3)
Grip Wrench Adapter with Single Lead TMFN 23-30 24-30, 26-32 23-30 - - - 24-30 026-032
205378A TMFN 30-40 30-40, 34-40 30-40 - 41-42 - 30-40 034-040
(Wrench Not Included)
205377 Dent Puller Attachment TMFN 40-52 40-48, 44-52 40-52 41-50 41-54 44-52 40-44 044-052
6 1/2 in Internal/External Pulling Jaws
44148
(Qty. 3) Overall
32054 2 3/8 in Internal Puller Jaws (Qty. 3) Capacity Length Pin Size
7208A Front Hub Puller Assembly Item No. Mfr. No. (in) (in) (in)
309321 Forcing Screw 100765091 TMFN 23-30 5.9 to 7.7 7.9 0.45
215895 Sleeve 100765092 TMFN 30-40 7.7 to 9.8 7.9 0.53
Accessories 101169855 TMFN 40-52 9.8 to 12.6 13.4 0.67
Item No. Mfr. No.
101582795 7948 63106 Plastic Carrying/Storage Case
24 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Features:
• Magnetic
• For 1/4” hex inserts
Overall
Overall Drive Size Length
Length Item No. Mfr. No. (in) (in)
Item No. Mfr. No. (in) 111228718 M-825 1/4 2 9/32
111266984 M-490-2 2 111267028 M-838 3/8 2 23/32
111266858 M-490 w2 31/32
111266985 M-490-4 4
111228944 M-490-6 6
30 Piece u-GUARD™
Impact Rated Fastening Set
Overall
Length
Item No. Mfr. No. Tip Size (in)
Features:
• Superior durability to withstand the 111266314 440-1X #1 1
toughest jobs 111266390 440-2X #2 1
• Pivoting insert rails refillable for ease of use 111266402 440-3X #3 1
• Stackable for convenient storage 111266395 440-4X #4 1 5/16
• Full length metal hinge for improved case life
• Attachment points for versatility on the job
• Exterior labels for visibility and marking
• Bits are secured in pivoting insert rails inside
the case, allowing easy access to bits and 1/4” Hex Power Drive
case configurability Phillips® Bit
Includes:
• (14) Phillips® insert bits
• (4) square insert bits
• (8) Torx® insert bits
• (1) slotted insert bits Overall
• (2) nut setters Length
• (1) quick release bit holder Item No. Mfr. No. Tip Size (in)
• (1) alphaCASETM 111228446 4910-AX #0 2 3/4
111266532 491-AX #1 2 3/4
Item No. Mfr. No.
111266535 491-BX #1 3 1/2
115712866 AUGSET-30
111266537 491-CX #1 6
111266507 491X #1 1 15/16
111266504 492-AX #2 2 3/4
111266510 492-BX #2 3 1/2
111266565 492-CX #2 6
111266573 492X #2 1 15/16
111266579 493-AX #3 2 3/4
38 Piece Fastening Set 111266582 493-BX #3 3 1/2
111266584 493-CX #3 6
111266543 493X #3 1 15/16
Features:
• Superior durability to withstand the toughest
jobs
• Pivoting insert rails refillable for ease of use
• Stackable for convenient storage 1/4” Torx® Hex Insert Bit
• Full length metal hinge for improved case life
• Attachment points for versatility on the job
• Exterior labels for visibility and marking
• Bits are secured in pivoting insert rails inside
the case, allowing easy access to bits and
case configurability Overall Length: 1 in
Includes:
• (14) Phillips® insert bits
• (9) square insert bits Item No. Mfr. No. Drive Size
• (10) Torx® insert bits 111266358 440-TX-08X T-08
• (2) slotted insert bits 111266359 440-TX-09X T-09
• (2) nut setters 111266361 440-TX-10X T-10
• (1) quick release bit tip holder 111266375 440-TX-15X T-15
• (1) alphaCASETM 111266380 440-TX-20X T-20
111266676 440-TX-25X T-25
Item No. Mfr. No. 111266613 440-TX-27X T-27
116176435 AMSET-38 111266618 440-TX-30X T-30
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 25
Hand, Power & Analytical Tools
High Performance Super
1/4” Torx® Hex Power Drive Bit Sawzall® Blade
26 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
M18 FUEL™ 4 1/2”/5” M18 FUEL™ Sawzall®
Braking Grinder Kit Reciprocating Saw Kit
Features:
• Rapid Stop braking feature stops cutting disks
in 0.9 seconds, flap disks in 1.3 seconds and Features:
grinding disks in 1.5 seconds • Delivers faster than corded cutting speed and
• POWERSTATE™ brushless motor delivers the durability of a corded saw
maximum power and up to 10x longer motor life • POWERSTATE™ brushless motor supplies
• REDLINK PLUS™ intelligence provides optimized constant power for faster cuts and reduced
performance, electronic clutch and overload heat for extended life
protection using total system communication • REDLINK PLUS™ intelligence provides
between tool, battery and charger optimized performance and overload
• Power to grind: world’s first cordless braking protection using total system communication
grinder with corded performance between tool, battery and charger
• Durability: same metal housing and gearing • REDLITHIUM™ XC 4.0 battery pack provides
system as legendary high performance corded superior pack construction, more work per
grinders charge and more work over the life of the pack
• 100% tool free: make all accessory changes than competitive batteries
and guard adjustments without a wrench
for increased productivity
Length: 15 1/4 in
Voltage Rating: 18 VDC Length: 18 1/2 in
RPM: 8,500 Voltage Rating: 18 VDC
Item No. Mfr. No. Type Strokes Stroke
112376788 2783-20 Grinder Only Per Length
112376791 2783-22a Kit Item No. Mfr. No. Minute (in)
a
Includes: grinder, guards, battery pack, charger and nuts. 106488156 2720-22 3,000 1 1/8
Voltage: 120 V
Filter Type: Cartridge
Capacity
Item No. Mfr. No. (gal) Amps HP
115483056 62698a 6 8.3 4 1/4
115712797 62703b 12 10 5
115712796 62723c 16 12 6 1/2
a
Includes vacuum, owner’s manual, three extension wands, 1 7/8” x 8’ premium locking pro hose, utility nozzle and standard filter.
b
Includes vacuum, owner’s manual, two extension wands, 2 1/2” x 8’ premium locking pro hose, utility nozzle, wet nozzle, car nozzle and standard filter.
c
Includes vacuum, owner’s manual, two extension wands, 2 1/2” x 8’ premium locking pro hose, locking blowing wand, utility nozzle, wet nozzle, car nozzle and standard filter.
Hose
Capacity Hose Size Length
Item No. Mfr. No. (gal) (in) (ft)
111957650 50313 4 1 7/8 8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 27
Hand, Power & Analytical Tools
16 Gallon Stainless Steel Wet / Dry
Vac With Cart Bench Grinder
Features: Features:
• Top-of-the line 6.5 peak horsepower – High • UL® listed motor
performance wet/dry vacuum provides • Totally enclosed pre-lubricated ball bearings
optimum power • Heavy-duty guarded toggle switch on 8” and 10”
• Longer motor life – Durable, long-lasting motor • Rubber mounts prevent movement
backed by industry’s best warranty • Cast iron wheel guards and dust vents
• Sturdy cart, push handle and large rear • One-piece quick adjusting spark guards
wheels – These features act together to allow • Large eye shields with quick adjustment
the vac to travel easily up/down stairs and over • Adjustable tool rests
rough terrain and thresholds • Fine and coarse vitrified grinding wheels included
• Accessory storage bag keeps accessories • Two-year manufacturer warranty
organized and close by for easy access Phase: Single
• Cord-wrap/large handle – Large carry handle provides an area for the storage of the Voltage: 115
20’ power cord
• Stainless steel drum construction – Attractive stainless steel construction provides Grinding
Wheel Wheel
professional appearance Dia. Width
• 16-gallon drum cleans up large spills and messes at work sites and busy shops Item No. Mfr. No. HP (in) (in) RPM
• Sound reduction technology – Scroll Noise Reduction® is a patented feature that
provides quiet operation by precisely controlling the flow of air through the vac 101731811 577101 1/2 6 3/4 3,450
• Professional locking hose – The ultra-flexible hose won’t pull loose during use, and is 101731120 577102 1 8 1 3,450
4x more durable than their standard hose; smooth interior surface to reduce clogging WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
• Blowing capacity – Blow leaves from walkways or decks, and debris from job sites,
tools, etc.
• Large drain located to lowest point of drum for emptying of water
• Qwik Lock® filter fastening system – Install or remove your filter quickly, easily and
secure without tools or fasteners
Amps: 12 A
Horsepower: 6 1/2 hp
Nozzles: Car, Crevice, Utility, Wet
Casters: 4
Filter Type: Fine Dust Pedestal Stand for Industrial Grinder
Extension Wands: 2
Hose Features:
Capacity Hose Size Length • Heavy-duty cast iron construction
Item No. Mfr. No. (gal) (in) (ft) • Stable, wide stance base
111786432 50353 16 1 7/8 8 • Fully adjustable platform coolant tank and tool tray
Dimensions
Item No. Mfr. No. (in)
4.5 Gallon ProPack® Wet / Dry Vac 101733307 577172 31 x 21 x 51
WARNING: Cancer and reproductive harm -
Features: www.P65Warnings.ca.gov.
• 5.0 peak horsepower – High performance
wet/dry vacuum
• Longer motor life – Durable, long-lasting
motor backed by industry’s best warranty
• Unique design stores hose, accessories
and 20’ power cord inside the vac,
keeping everything organized and close
at hand
• Large cushioned handle – Portable and
folds away for storage
• Flat top work surface increases your effective work area Industrial Grinder
• Polypropylene drum construction – Rugged construction to meet the high demands
of worksites Features:
• 4.5-gallon drum cleans up of most spills and messes at work sites and busy shops • Permanently lubricated sealed ball bearings
• 1 7/8” ultra-flexible locking hose won’t pull loose during use; and the 2’ compact • Cast iron wheel guards with exhaust ports
hose extends to 7’ • Cast iron adjustable tool rests
• Blowing capacity – Blow leaves from walkways or decks and debris from job sites, • Large adjustable eyeshields
tools, etc. • 36 and 60 grit wheels included
• Qwik Lock® filter fastening system – Install or remove your filter quickly, easily and • 8 ft cord/plug connected for 115 VAC
secure without tools or fasteners • Full three-year warranty
8” Grinder • UL® listed
Amps: 9 A
Horsepower: 5 hp Item No. Mfr. No. Phase HP RPM Voltage
Nozzles: Crevice, Dusting Brush, Utility
Filter Type: Fine Dust 100999002 8107W Single Phase 3/4 3,600 115/230
Extension Wands: 2
8” Deluxe Grinder
Hose
Capacity Hose Size Length
Item No. Mfr. No. (gal) (in) (ft) Item No. Mfr. No. Phase HP RPM Voltage
111957651 50318 4 1/2 1 7/8 7 100999003 8107WD Single Phase 3/4 3,600 115/230
28 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Gemini Chop Saw Reinforced
Eyeshield Cut-Off Wheel
Features: A chop saw is a light, low horsepower portable machine. Although very similar to a
• Shatter resistant compound miter saw, it is designed for cutting denser materials, like metal bar, tubing
• Plexiglas® or pipe. Chop saw cut-off wheels are designed specifically for this machine with finer
grit, softer grades and reinforcement layers that match the application.
Item No. Mfr. No. Size (in)
100997100 GA11 6x4 Features:
Use with Baldor-Reliance® 7” to 14” grinders. • Maximizes performance of conventional aluminum oxide
• Excellent life and cut rate
• Cutting small diameter metal pieces, bar stock, metal
pipe, tubing, decking, cable, drywall studs and metal
plate dimensioning
Gemini
Lighted Eyeshield Type 01/41
Good Performance
Features: Fast Cut
• UL® listed
Disc Size
Dimensions Item No. Mfr. No. (in)
Item No. Mfr. No. (in) 101642334 66253306626 14 x 3/32 x 1
100997117 GA9 5 1/2 x 3 3/4
Gemini
Type 01/41
Good Performance
Long Life
Disc Size
Item No. Mfr. No. (in)
Horizontal / Vertical Bandsaw 101646105 66253306627 14 x 7/64 x 1
Features:
• 9 7/16” x 10” work table in the vertical position
• Rapid action vise miters to 45°
• Adjustable material stop for repeatability
• CSA/CUS: following strict guidelines and electrical
requirements, this JET Saw is CSA/CUS certified
• Auto shut-off after cut
• Adjustable ball bearing blade guides
• Cast mounted adjustable hydraulic downfeed
• Complete coolant system
• Four 8” rubber wheels for ease of movement
• 3/4” bi-metal blade
Gemini Depressed Center Wheel
Motor Size: 3/4 hp
Floor Space Required: 50 in x 20.5 in x 41 in
Round Stock Rectangular Length Use the Gemini grinding and cutting wheel for all your general-purpose cutting and
Capacity Capacity x Height grinding projects. The wheel features an aluminum oxide construction that works
Item No. Mfr. No. (in) (in x in) with metals, such as 400 series stainless steel, hard carbon steels and soft carbon
112297469 414559 7 7 x 12 steels. The wheel attaches to right angle grinders for side cleaning and notching pipes
and weld beads. The wheel has a long life due to its durable bond, which promotes a
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. consistent cut rate.
Features:
• Quality aluminum oxide for consistent performance at a
economical price
• Durable bond designed for consistent cut rate while
retaining good wheel life
Floor Drill Press • 1/8” thick depressed center wheel designed to be used
on a right angle grinder for off hand cut-off, notching and
side cleaning pipes and weld beads
Features: • Versatile, general purpose specification for cutting off and
• Hinged metal belt and pulley cover light grinding a variety of materials, including 400 series
• Quick adjustment motor mount for rapid changing of stainless, hard carbon steels and soft carbon steels
spindle speeds
• Rotating, 45° tilting, crank operated worktable with release clamp
• On/off switch located on front of drill press head
• 1/2” diameter external depth stop with three-nut locking feature Gemini
for quick adjustment Type 27
Good Performance
Drilling Disc Size Max.
Capacity Table Size Item No. Mfr. No. (in) RPM
Item No. Mfr. No. HP (in) (in) 110804550 66252843590 4 1/2 x 1/8 x 5/8-11 13,580
101732236 354170 1 1/2 3/4 18 1/2 x 16 106100024 66252843591 4 1/2 x 1/8 x 7/8 13,580
WARNING: Cancer and reproductive harm - 106148839 66252843593 4 1/2 x 1/4 x 5/8-11 13,580
www.P65Warnings.ca.gov. 110322498 66252843594 4 1/2 x 1/4 x 7/8 13,580
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 29
Hand, Power & Analytical Tools
Right Angle Grinder Reinforced
Cut-Off Wheel
The Norton right angle grinding wheel line consists of type 01/41 straight and type 27/42 depressed center cut-off wheels from 1 1/2” to 9” diameters. These wheels come in
ultra thin 0.035” for quick burn-free and burr-free cutting to 0.125” for more durable applications. All are reinforced for the demanding nature of portable cut-off.
Features:
• Blend of advanced chemistry and shaped zirconia alumina abrasive grain
• New, improved performance
• Two to three times the life of aluminum oxide
• Broad utility from light to heavy pressure
• Excellent performance-to-price ratio for lower total grinding costs
• Noticeably longer life and faster cut rate
• Over 50% longer life
• Cutting sheet metal, cutting pipe and metal fabrication
Features: • Better choice for cutting off stainless steel, carbon steel, alloys and gray iron
• Quality, versatile aluminum oxide for cutting only
• Consistent performance at a competitive price BlueFire RightCut
• Cutting sheet metal, cutting pipe and metal fabrication Type 01/41
• Good, versatile choice for cutting off steel and non-ferrous metals Better Performance
Disc Size
Gemini RightCut Item No. Mfr. No. (in)
Type 01/41
Good Performance 105975915 66252843208 4 1/2 x 1/16 x 7/8
110798364 66252843209 5 x 1/16 x 7/8
Disc Size 110448815 66252843210 6 x 1/16 x 7/8
Item No. Mfr. No. (in)
101648052 66252823602 4 1/2 x 0.045 x 7/8
101642333 66252823603 5 x 0.045 x 7/8
110804460 66252842202 6 x 0.045 x 7/8
101648296 66252823604 6 x 0.045 x 7/8 Features:
• Blend of advanced chemistry and shaped zirconia alumina abrasive grain
• New, improved performance
Features: • Two to three times the life of aluminum oxide
• Quality, versatile aluminum oxide for cutting only • Broad utility from light to heavy pressure
• Consistent performance at a competitive price • Excellent performance-to-price ratio for lower total grinding costs
• Cutting sheet metal, cutting pipe and metal fabrication • Noticeably longer life and faster cut rate
• Good, versatile choice for cutting off steel and non-ferrous metals • Over 50% longer life
• Cutting sheet metal, cutting pipe and metal fabrication
Gemini RightCut • Better choice for cutting off stainless steel, carbon steel, alloys and gray iron
Type 27/42
Good Performance BlueFire RightCut
Disc Size Type 27/42
Item No. Mfr. No. (in) Better Performance
106012100 66252842026 4 1/2 x 0.045 x 7/8 Disc Size
110804412 66252841939 5 x 0.045 x 5/8-11 Item No. Mfr. No. (in)
106471844 66252842036 5 x 0.045 x 7/8 110798365 66252843219 4 1/2 x 1/16 x 7/8
106028600 66252842025 4 1/2 x 0.045 x 5/8-11 110798366 66252843220 5 x 1/16 x 7/8
104947343 66252830587 6 x 0.045 x 5/8-11 110804513 66252843221 6 x 1/16 x 7/8
Norton small diameter cut-off wheels consist of type 01/41 straight and type 27/42 Norton high-speed cut-off abrasive wheels provide the industry’s leading performance
depressed center cut-off wheels. These wheels come in ultra thin 0.035” for quick in all high speed gas and electric powered applications.
burn-free and burr-free cutting to 0.125” for more durable applications. All are
reinforced for the demanding nature of portable cut-off.
Features:
• Quality, versatile aluminum oxide grain
Features:
• Consistent performance at a competitive price
• High performance aluminum oxide grain wheels designed
• Good, versatile choice for steel and ferrous metals
for general-purpose cutting of all steel and stainless parts,
including rebar, steel pipe, structural steel, sheet metal,
cable and small to medium diameter solid pieces
• Patented universal arbor accomodates both 1” and 20mm
machines
Free Cut
Type 01/41
Disc Size
Item No. Mfr. No. (in)
Gemini
101631765 66243510627 3 x 0.035 x 1/4
Type 01/41
101648292 66243510628 3 x 0.035 x 3/8 Good Performance
101648293 66243510645 3 x 1/16 x 1/4
101422973 66243510647 3 x 1/16 x 3/8 Item No. Mfr. No. Disc Size
101648195 66243510655 4 x 1/16 x 3/8 102183714 66252837841 14 x 1/8 x 1in / 20mm
30 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
BlueFire Depressed Center Wheel 3M™ Silver Depressed Center Grinding Wheel
Features:
• Designed for heavy grinding, beveling
Features: and weld removal
• Blend of advanced chemistry and shaped zirconia • May be used on a variety of substrates,
alumina abrasive grain such as carbon steel and stainless steel
• New, improved performance • 3M™ precision-shaped grain
• Two to three times the life of aluminum oxide cuts exceptionally fast, helping
• Broad utility from light to heavy pressure increase productivity
• Excellent performance-to-price ratio for lower total • Exceptional durability extends the life of
grinding costs the wheel for great performance value
• Noticeably longer life and faster cut rate • Use with tools and accessories designed
• Better choice for grinding of stainless steel, carbon for depressed center grinding wheels
steel, alloys and gray iron • For safety, always use on a tool with an
approved guard, as per ANSI B7.1
BlueFire RightCut Type 27 Abrasive Material: Zirconia Alumina
Disc Size Max.
Disc Size Item No. Mfr. No. (in) RPM
Item No. Mfr. No. (in) 114936874 00-051125-87397-0 4 1/2 x 1/4 x 5/8-11 13,300
110591588 66252843211 4 1/2 x 1/8 x 5/8-11 114935841 00-051125-87453-3 4 1/2 x 1/4 x 7/8 13,300
106316376 66252843212 4 1/2 x 1/8 x 7/8 114936873 00-051125-87447-2 6 x 1/4 x 5/8-11 10,200
102226281 66252843213 4 1/2 x 1/4 x 5/8-11 114935842 00-051125-87448-9 7 x 1/4 x 5/8-11 8,500
106269578 66252843214 4 1/2 x 1/4 x 7/8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 31
Hand, Power & Analytical Tools
Blaze R980P Flap Disc Polimaxx Polishing Flap Disc
Features: Features:
• Latest generation ceramic alumina abrasive grain • Fleece flap disc with coarse fleece texture (slight machining
• Ideal for use on stainless steel, cobalt, chrome, Inconel, effect)
titanium and other hard-to-grind materials • For descaling and derusting workpieces, preparing welding
• Y-weight polyester flaps with a supersize grinding seams, smoothing welding seam flaking, sanding very fine
aid significantly improve life, grain retention and fray welding seams, removing weld spatters
resistance while providing a cool, noticeably fast cut rate • Universally applicable for stainless steel, steel, aluminium
• Blue, flexible, trimmable plastic backing plate and non-ferrous metals
Quick-Trim product Arbor Hole: 7/8 in
Max. RPM: 13,300
Disc Type: Type 27 Pkg. Qty.: 10
Dia.: 4 1/2 in
Dia.
Abrasive Material: Ceramic Alumina Item No. Mfr. No. (in) Grit Type
Arbor Dia.: 7/8 in
117229309 5541207572 4 1/2 Fine
Item No. Mfr. No. Grit 117229308 5541206572 4 1/2 Medium
110521320 66254400253 40 117229307 5541204572 4 1/2 Coarse
110798375 66254400254 60 117229310 5541220572 4 1/2 High Gloss Polishing Felt
110798376 66254400255 80
Dia.
Item No. Mfr. No. (in) Grit
Arbor Hole: 7/8 in 102170503 00051144764334 2 60
Grade Z (Zirconia) Pkg. Qty.: 10 102170502 00051144146611 2 80
Dia.
Item No. Mfr. No. Type (in) Grit
112915660 5211184572 T27 4 1/2 40
112915661 5211186572 T27 4 1/2 60
112915662 5211187572 T27 4 1/2 80
112915672 5211384572 T29 4 1/2 40 Scotch-Brite™ Roloc™ Surface Conditioning Disc
112915673 5211386572 T29 4 1/2 60
112915674 5211387572 T29 4 1/2 80 Features:
• Leaves surface suitable for painting and coating
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. • Nonwoven abrasive
• Threaded attachment system secures the disc to
the holder
Grade EXT (Ceramic) • Use for cleaning, finishing, blending and
deburring applications
Dia.
Item No. Mfr. No. Type (in) Grit
112915657 5211434572 T27 4 1/2 40 Aluminum Oxide
112915658 5211436572 T27 4 1/2 60 Dia. Max. Pkg.
112915659 5211437572 T27 4 1/2 80 Item No. Mfr. No. Type (in) RPM Grit Qty.
112915669 5211444572 T29 4 1/2 40 102152829 00048011257662 Roloc Disc TSM
™
3 18,000 Medium 25
112915670 5211446572 T29 4 1/2 60 102193493 00048011055312 Roloc™ Disc TR 3 18,000 Medium 25
112915671 5211447572 T29 4 1/2 80 102153129 00048011055329 Roloc™ Disc TR 3 18,000 Coarse 25
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. 102170514 00048011055275 Roloc™ Disc TR 2 25,000 Medium 50
32 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Scotch-Brite™
Bristle Disc Blaze F980 Fiber Disc
Features:
• Super tough plastic bristle brushes, embedded with
abrasive, wear as they clean, continually exposing Features:
fresh abrasive • Best choice for stainless steel, titanium and super alloys
• No risk of loose wires • Micro-fracturing 100% ceramic alumina grain constantly
• Use with 915-00-048011-05680-7 exposes sharper grain edges and improves grain life
• Ideal tool to replace scrapers, wire wheels and chemical • Self-lubricating, advanced super size treatment
gasket strippers • Extra heavy duty backing on 50 grit and coarser
• Use for deburring, blending, finishing, • Foil packed availability
polishing, cleaning and coating, defect, • Minimizes heat, loading and glazing on stainless, titanium
Grit: 50
scratch and rust removal and super alloys
Color: Green
• Improved grain retention for longer life
Dia. Max. • Fully recyclable for reduced landfill waste
Item No. Mfr. No. Type (in) RPM Pkg. Qty.
102170712 00048011186986 Roloc™ 1 30,000 20
102193491 00048011187303 Roloc™ 2 25,000 10 Abrasive Material: Ceramic Alumina
102193490 00048011187341 Roloc™ 3 15,000 10
Item No. Mfr. No. Disc Size (in) Grit
102172318 00048011242415 Bristle Disc 4 1/2 12,000 5
104945171 69957398000 4 1/2 x 7/8 24
101658143 69957398001 4 1/2 x 7/8 36
104989486 69957398002 4 1/2 x 7/8 50
104961092 69957398005 5 x 7/8 24
3M™ Roloc™ TR Disc Pad 104950314 69957398006 5 x 7/8 36
104950315 69957398007 5 x 7/8 50
Features:
• Female threaded to receive any standard 1/4-20
thread shaft
Arbor Hole Size: 1/4-20 NC
Density: Medium
Dia.
Item No. Mfr. No. (in)
102152820 00051144450954 2
102171712 00051144450923 3
BlueFire F826P Fiber Disc
Abrasive Material: Aluminum Oxide Item No. Mfr. No. Disc Size (in) Grit
101658142 66261138457 4 1/2 x 7/8 24
Disc Size: 4 1/2 x 7/8 Disc Size: 5 x 7/8 101670871 66261138456 4 1/2 x 7/8 36
Grit Item No. Mfr. No. Item No. Mfr. No. 104950400 66261138454 4 1/2 x 7/8 50
24 110807123 66623353309 110807153 66623357276 104950401 66261138563 5 x 7/8 24
36 110807122 66623353306 110807154 66623357277 104961918 66261138562 5 x 7/8 36
50 110807124 66623353310 110807155 66623357278 104955914 66261138561 5 x 7/8 50
Cut-off Disc
Osborn’s line of world-class abrasives is designed to meet the demands of the toughest of tasks. Osborn sets the bar for high performance standards,
and offers cut-off discs that outperform competetive products with the best cut and great durability. Cut-off discs are engineered with reinforced design
to prevent premature wheel edge wear, durable bond formations for extended life and precision balancing for smoother operation.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 33
Hand, Power & Analytical Tools
Steel
Scuf-Gard® Crimped
Wire Coated End Brush Brush Dia. Wire Size
Arbor
Hole Size Max.
Item No. Mfr. No. (in) (in) (in) RPM
The Osborn crimped wire end brush is specially 101443073 33359 2 3/4 0.014 5/8-11 NC 14,000
manufactured with a rugged, durable layer of elastomer
101415518 33459 2 3/4 0.020 5/8-11 NC 14,000
on the cup to prevent accidental scratching or marring of
101414282 33000 3 1/2 0.020 5/8-11 NC 14,000
the work surface during operation. Attached 1/4” shank
conveniently mounts on handheld power tools and CNC WARNING: Cancer - www.P65Warnings.ca.gov.
equipment, and is engineered to provide uniform brushing
action when operated at high speeds.
Material: Stainless Steel At Applied®, we know the value we provide can take
many forms – from energy savings to greener
Overall practices and other sustainability initiatives. Learn
Brush Dia. Wire Size Length Max. more about our commitment to social responsibility
Item No. Mfr. No. (in) (in) (in) RPM
at Applied.com/corporate-social-responsibility
101415509 30141 1 0.0050 2 3/4 20,000
WARNING: Cancer - www.P65Warnings.ca.gov.
34 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Metal Adapter for Brushes with High Speed Small Grinder
1 1/4” Arbor Hole Stringer Bead Wheel Brush
Trust Osborn TufBrush™ products to get the toughest jobs done quickly and efficiently.
Features: Osborn’s unique design starts with quality wire. TufWire™, our proprietary wire strands,
• Slip fit adapter offers increased rigidity and aggressiveness. Combined with a unique knot design,
• Other sizes available TufBrush™ products consistently remove 60% more material than standard carbon
• Use in pairs with Osborn wheel brushes steel wire varieties. Because of the brush’s state-of-the-art design, TufBrush products
last twice as long as commodity brushes, which means less replacements and less
Adapter Arbor Hole Wheel Arbor Hole downtime. Proudly made in Richmond, IN, USA.
Item No. Mfr. No. (in) (in)
101442541 75050 3/4 1 1/4
WARNING: Cancer - www.P65Warnings.ca.gov.
ATB Abrasive Nylon Wide Face Wheel Brushes have a wide-face construction and Features:
an improved fill density, which provides 50% to 80% more working points than • Works aggressively, yet smoothly and efficiently, on air
the average abrasive brush. Since their cutting action does not require the use of a tools or portable power tools
compound, the need to clean finished parts is eliminated. The brushes may be used • 2x life and 60% more material removal
individually or mounted in multiples for a wider face. • Removal of rubber flash, paint slag, scale, rust, surface
contamination and hard surface incrustations
Features: • Cleaning welds and splatter
• Highly effective on metallic and nonmetallic materials • Descaling
Applications: Steel
• Deburring Brush Wire Arbor
• Edge breaking Dia. Size Hole Size Max.
• Finishing Item No. Mfr. No. (in) (in) (in) RPM
Material: Nylon 101476234 26369 4 0.02 5/8-11 NC 20,000
WARNING: Cancer - www.P65Warnings.ca.gov.
Trim Arbor
Brush Dia. Length Hole Size Max.
Item No. Mfr. No. (in) Grit (in) (in) RPM
101413928 22296 8 80 1 1/2 2 4,500
101413507 22299 8 320 1 1/2 2 4,500
WARNING: Cancer - www.P65Warnings.ca.gov.
Arbor hole with double keyway.
7” Stringer Bead Brush
Features:
High Speed Small Grinder • Enjoy American-made quality and performance at an
Knot Wire Wheel Brush economical price
• Features Osborn’s proprietary TufWire™ wire strands,
Featuring Osborn’s proprietary TufWire™ wire strands and rugged knot-type which outperform competitive products in both
construction. Osborn Knot Wire Wheel Brushes provide more brush flexibility to material removal and longevity
deliver more uniform results. The design also ensures maxiumum safety and efficient • Patent pending knot design for the most aggressive
operation at high speeds, making them ideal for a wide variety of projects. Proudly cleaning action
made in Richmond, IN, USA. • Specially designed for the pipeline industry
Material: Steel
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 35
Hand, Power & Analytical Tools
1/2” Drive 20V High Torque 1/2” Air Impact Wrench
Impact Wrench
Features: Features:
• Tuned impact mechanism with 1,500 ft lb nut • 930 ft lb of maximum reverse torque, nut busting
busting torque and 1,000 ft lb of max. torque torque of 1,350 ft lb, powered by Ingersoll Rand’s
• Patented steel reinforced frame and tough finely tuned twin hammer impact mechanism
composite housing protects against aggressive • At only 4.6 lb, no other impact wrench on the market
fluids, chemicals and repeated drops can match the combined power and weight of the
• Powerful brushless motor delivers durability 2235 series
and efficiency as well as best-in-class power- • Every component, every mechanism and every
to-weight ratio function of the 2235 series has been put through the
harshest conditions to ensure it always performs in
• Shadowless 360° LED light ring with task light mode and four dimmable settings
the face of the toughest jobs
• Durable all-metal drivetrain and hammer mechanism optimized for maximum power
• Backed by a two-year warranty, the 2235 series is a
and efficiency
finely tuned workhorse, from its components to its
• IQV Power Control System with four modes: full power, half power, wrench tight and
technology, to be the impact wrench you can always
hand tight
count on to get REAL WORK done
• Variable speed switch with electronic brake provides maximum control of the tool
• Born from the legendary durability of the Ingersoll
and increases safety – release trigger, drive stops spinning
Rand 2135 series, the 2235 pushes toughness to the
• Measures just 8.1” from tip to tail and weighs only 7.6 lb
next level
• Kit includes two 5.0 ah batteries, charger and tool bag
• Built with a titanium hammercase, steel wear plate
and composite housing that protect the tool
Drive Max. from the harshest environments
Size Blows Per Torque Length
Item No. Mfr. No. (in) Minute (ft lb) (in)
115094227 W7152-K22 1/2 2,450 1,000 8.1 Inlet Size: 1/4 in NPTF
Hose Size: 3/8 in
Blows Max.
Max. Per Torque Length
Item No. Mfr. No. RPM Minute (ft lb) (in)
CV Series Pistol Grip Impact Wrench 111066595
111066612
2235QTIMAX
2235QTIMAX-2a
8,500
8,500
1,220
1,220
870
870
7.6
9.6
113262042 2235PTIMAXb 8,500 1,220 900 7.6
Features: 111066597 2235TIMAX 8,500 1,220 900 7.6
• Practical and rugged workhorse for general 111066596 2235TIMAX-2a 8,500 1,220 900 9.6
industrial production, repair and maintenance
• Lightweight, balanced and comfortable a
2” extended anvil.
• Delivers Cleco performance at an unbeatable value b
Pin anvil.
• Durable Cleco motor: power-to-weight ratio
• Dial forward, reverse and speed settings
for quick adjustment
• Available with pin or ring anvil for added versatility 1” Air Impact Wrench
• Powerful twin hammer mechanism delivers
sustained power with little reaction to the end user
• Variable speed trigger gives precise control
• Silencer muffler included with the tool for
sound reduction
• Rugged metal end plate protects against drop
and misuse
Max.
Drive Size Retainer Torque Length
Item No. Mfr. No. (in) Type RPM (ft lb) (in)
111254592 CV-750P 3/4 Pin 5,500 1,300 8.7
Features:
• Combines exceptional power, control and durability Inlet Size: 1/2 in NPTF
• Features a high efficiency six vane motor Hose Size: 3/4 in
1/2” Maintenance-Duty • Integral 360° swivel inlet makes kinked hoses a Handle Type: Pistol
Air Impact Wrench thing of the past Type: General-Duty
Blows Max.
Mfr. Per Torque Length
Features: Item No. No. RPM Minute (ft lb) (in)
• TwinHammer Plus™ impact mechanism 101600817 295A 5,250 700 2,000 11.4
• Pressure-feed lubrication
• Ring-type socket retainer
Features:
• Superior balance, Inlet Size: 1/2 in NPTF
“angled-down” exhaust Hose Size: 3/4 in
Length: 7.3 in • High efficiency six-vane air motor Handle Type: Back D-Handle, Side D-Handle
Inlet Size: 1/4 in NPT • Three-position power regulator Type: Heavy-Duty
244A
Hose Size: 3/8 in
Blows Max.
Bolt Mfr. Per Torque Length
Blows Torque Max. Sound Cap Item No. No. RPM Minute (ft lb) (in)
Max. Per Range Air Flow Level Dia. 102094047 285B 5,250 700 1,475 14.2
Item No. Mfr. No. RPM Minute (ft lb) (cfm) (dB) (in) 101510861 285B-6 5,250 700 1,475 20.4
101487040 231C 8,000 1,200 25 to 600 22 99 9/16 114457398 2850MAX 5,500 770 2,000 19.1
101489673 244A 7,000 1,300 40 to 500 21 93 5/8 114457399 2850MAX-6 5,500 770 2,100 13.1
36 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Features:
• MAX Power: 1,350 ft lb maximum reverse torque from a tool that weighs just 7.4 lb and is compact enough to access tight spaces
• MAX Durability: Built to last and designed to withstand tough use in rugged environments
• MAX Productivity: An air motor that’s 16% more efficient than its predecessor and easy-to-clean inlet screen means less downtime, better tool
performance and less money spent on compresseed air
• Contoured, professional touch trigger and ergonomically designed handle for increased comfort
• Push button forward/reverse
• Ring type socket retainer and thru-hole
• Standard two-year limited manufacturer warranty Hose Size: 1/2 in
Inlet Max.
Drive Size Blows Torque Sound Air
Size NPTF Per Range Level Flow Length
Item No. Mfr. No. (in) (in) RPM Minute (ft lb) (dB) (cfm) (in)
101680629 2145QIMAX 3/4 3/8 7,000 1,150 200 to 1,830 91.1 32 8.5
102894614 2155QIMAX 1 3/8 7,000 1,150 200 to 1,830 91.1 32 8.8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 37
Hand, Power & Analytical Tools
301B Air Angle Die Grinder 12LF Series Right Angle Grinder
Features:
Features: • Composite housing
• Powerful motor delivers 0.25 hp (0.19 kW) at • Wide array of speeds; front
21,000 rpm free speed and rear exhaust models
• Durable ball bearing construction improves available
balance, reduces vibration and ensures a longer life • Ergonomic and balanced HP: 2/5
• Strong aluminum housing withstands tough design minimize operator Length: 6.6 in
operating conditions fatigue Style: Front Exhaust
• Small and lightweight design provides easy Inlet Size: 1/4 in NPT
operation and greater access to tight spots
• Easy-to-use, integral safety-lock throttle lever Collet Size
prevents accidental start up Item No. Mfr. No. RPM (in)
• Front exhaust helps keep work surface clean 111231187 12LF200-36 12,000 1/4
• Tool comes with 1/4” and 6 mm collets and 111231205 12LF201-36 20,000 1/4
two wrenches
HP: 1/4
Length: 5.27 in
NPTF Size: 1/4 in Super-Duty Air Angle Grinder
Sound
Avg. Air Level Collet Size Combines a unique motor controller that virtually eliminates overspeeding, with a
Item No. Mfr. No. RPM Flow (cfm) (dBA) (in) powerful 0.8 hp motor to provide plenty of power for rust and material removal.
103665579 301B 21,000 6 105 1/4 Features:
• Rear exhaust with piped-away option
• Composite grip for improved comfort
• Locking lever with tease throttle
• Lightweight design
HP: 0.88
Length: 9 1/4 in
NPTF Size: 1/4 in
302B Air Angle Die Grinder
Max.
Air Sound Arbor Wheel Collet
Features: Flow Level Hole Dia. Size
• Powerful motor delivers 0.33 hp (0.25 kW) and Item No. Mfr. No. RPM (cfm) (dB) Size (in) (in)
20,000 rpm free speed 101490097 3445MAX 12,000 41 90.6 5/8-11 4 1/2 5/8
• Durable ball bearing construction improves
balance, reduces vibration and ensures a longer life
• Built-in lubricating wick increases angle gear life
• Lightweight, durable, ergonomic composite Positive Clutch Screwdriver
housing protects tool from cold air and offers
greater operator comfort
• Integral safety lock throttle lever prevents Features:
accidental start up • Reversible
• Rear exhaust directs air away from the operator; • 1/4” hex quick change
piped away exhaust kit optional • Balanced design offers easy handling and control to
• Tool comes with 1/4” and 6 mm collets and reduce operator fatigue
two wrenches • High parts interchangeability
• Side to center 13/16” (20.64 mm)
HP: 0.33
Length: 6.93 in Length: 6.8 in
NPTF Size: 1/4 in Drive Size: 1/4 in Quick Change
Hose Size: 1/4 in
Avg. Air Flow Sound Level Collet Size Inlet Size: 1/4 in NPT
Item No. Mfr. No. RPM (cfm) (dBA) (in)
Torque Air
103654809 302B 20,000 6 101 1/4 Pressure Range Consumption
Item No. Mfr. No. RPM (psi) (in lb) (cfm)
111232771 MP2465 1,800 90 Up to 140 22
38 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
V3000 FC Wireless AC
Pneumatic Needle Scaler Voltage Module
Features:
Features: • Fully functional AC voltage meter that wirelessly
• Adjustable bayonet-type needle housing lock allows relays AC voltage measurements to other Fluke
adjustment without special tools Connect™ enabled master units (Fluke 3000 FC
• Choice of three needle materials permits custom DMM, Fluke Ti200/300/400 infrared camera, PC
selection for various surfaces via optional pc3000 FC adapter, Fluke Connect™
• Rubber-faced throttle valve means positive sealing mobile app)
• Tested and approved in accordance with • With the Fluke V3000 FC Wireless AC Voltage
MIL-S-23492A (ships) Module you can measure up to 1000 V True-RMS
• Precision heat-treated needles for AC, use as a standalone meter or as part of the
maximum performance system or use the logging function for recording
• For surface preparation work involving the cleaning and saving up to 65,000 readings
or removal of paint, rust, dirt or weld slag, the 125 is
a durable, dependable, economical solution Nominal Operating Operating
Frequencies Range Temp.
Bore Dia.: 1 in Item No. Mfr. No. (Hz) (V) (°C)
Hose Size: 5/16 in 111024527 FLK-V3000FC 100 6 to 1000 -10 to 50
Inlet Size: 1/4 in NPT(F)
Stroke Length: 1 1/8 in
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 39
Hand, Power & Analytical Tools
MAX Infrared Thermometer Infrared Thermometer
Features:
• IP54 rated for dust and water resistance
• Rugged – 3 meter (9.8 ft) drop tested
• Completely redesigned for a more comfortable, ergonomic fit
• Small and lightweight; clips to your tool belt or belt loop or
easily fits into your tool box
• Precise laser technology makes for more accurate and
repeatable measurements
• The 62 MAX+ has dual rotating lasers to help you identify area
to be measured
• Large screen makes data easier to read, even in dark areas
• Displays the minimum, maximum or average temperature or FLUKE-566 FLUKE-568 FLUKE-561
the difference between two measurements
• Hi and Lo alarms for rapid display of measurements outside
the limits
Features:
Response Time: <500 ms
• Easily access advanced features with the soft key buttons and dot matrix display
Warranty: Two Years
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1
Temperature Temperature
(568) or 30:1 (566)
Item No. Mfr. No. Range (°C) Range (°F) Power Required • Compatibility, with all standard mini connector Type-K thermocouples, allows you to
preserve your thermocouple investments
102063701 FLUKE-62MAX -30 to 500 -20 to 932 AA Battery • Confidently measure a wide variety of surfaces, with the adjustable emissivity feature,
including a built-in material table
• Capture multiple points of data (up to 99 with the 568, and 20 with the 566),
for downloading and recalling later
• Easily adapt to lighting conditions with two levels of backlight
• Audible and visual alarms instantly alert you to measurements outside of your
set limits
• Quickly identify problems with the MIN, MAX, AVG and DIF functions
• Make contact thermometer measurements right away with the included Type-K
thermocouple bead probe
PTi120 Pocket Infrared Camera • Confidently troubleshoot equipment with 1% measurement accuracy
• Versatile interface with six languages
Features: from which to choose Response Time: <500 ms
• Automatically organize and file thermal Warranty: Two Years
images with Fluke Connect Asset Tagging
• Fully radiometric thermal imager gives you Temperature Temperature
measurement data to the pixel with 120 x 90 Item No. Mfr. No. Range (°C) Range (°F) Power
infrared resolution (10,800 pixels) 101463011 FLUKE-566 -40 to 650 -40 to 1,202 (2) Alkaline AA batteries
• 3.5” LCD touchscreen display for easy
troubleshooting (2) AA/LR6 Batteries &
101461502 FLUKE-568 -40 to 800 -40 to 1,472
USB When Used With PC
• -20° C to 150° C temperature
measurement range
• Six color palettes
• Can withstand drop up to one meter
• IP 54 enclosure rating Features:
• IR thermometer for quick measurements up close, or at a distance, without a ladder
• Contact thermometry capability, compatible with all standard mini-connector type K
IFOV (Spatial Resolution): 7.6 mRad thermocouples, preserves your investment in thermocouples
Operating Temperature Range: 14 °F to 122 °F • Fabric hook-and-loop fastener pipe probe for superheat and sub-cooling and other
Field of View: 50° H x 38° V contact and ambient measurements
• Single-point laser sighting
• Temperature range of -40 °C to 550 °C (-40 °F to 1022 °F) covers most industrial and
Item No. Mfr. No. residential applications
115610910 FLK-PTI120 9HZ • Easy emissivity adjustment (Lo, Med, Hi) for measuring pipes and other shiny
materials more accurately
• Lightweight (just 12 ounces/340 grams) and portable
• Very easy to use
• Efficient – no need to shut down equipment when making IR measurements
• MIN, MAX and DIF functions help you quickly identify problems
• Scan large areas or small objects quickly and efficiently
Response Time: <500 ms
T3000 FC Wireless Warranty: Two Years
Temperature Module
Temperature Temperature
Item No. Mfr. No. Range (°C) Range (°F) Power
Features: 101470126 FLUKE-561 -40 to 550 -40 to 1,022 (2) Alkaline AA batteries
• Wirelessly relays measurements to other Fluke Connect™
enabled master units (Fluke 3000 FC DMM, Fluke
Ti200/300/400 infrared camera, PC via optional
pc3000 FC adapter, Fluke Connect™ mobile app)
• Use it as a standalone meter or as part of the system and Not Finding What You Need?
it has a logging function for recording and saving up to
65,000 readings
Need something not shown in the catalog?
Applied Industrial Technologies has
Warranty: One Year a wide range of supplies to meet
your needs. Give us a call, and
Temperature Range
Item No. Mfr. No. (°C) Power we’ll be happy to assist you!
111024525 FLK-T3000FC -200 to 1372 (2) Alkaline AA batteries
40 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Ti Series Infrared Camera
IFOV
(Spatial Resolution) Temperature
Item No. Mfr. No. (mRad) Measurement Thermal Sensitivity Field of View
-20 °C to 650 °C ≤ 0.075 °C @ 30 °C
115610909 FLK-TI401-PRO 60HZ 0.93 34 °H x 24 °V
(-4 °F to 1,202 °F) target temp. (75 mK)
≤-10 °C to 1,000 °C ≤ 0.05 °C @ 30 °C
112984131 FLK-TI480 60HZ 0.93 34 °H x 24 °V
(14 °F to 1,832 °F) target temp. (50 mK)
-20 °C to 1,200 °C ≤ 0.025 °C @ 30 °C
114073573 FLK-TI450 SF6 60HZ 1.31 24° H x 17° V
(-4 °F to 2,192 °F) target temp (25 mK)
Features:
• Rugged, superbly engineered 640 x 480 thermal imaging camera
• Provides large 5.7-inch responsive LCD touchscreen with 150% more viewing Accuracy: ±2% of reading or ±2 °C, whichever is greater
area than 3.5-inch screen Dimensions: 10.8 in x 6.3 in x 3.8 in
• Features 240° rotating screen for unmatched shooting flexibility Display: 5.7 in LCD Touchscreen
• Provides 4x the pixel data with on-camera SuperResolution to create Field of View: 34 °H x 24 °V
1280 x 960 resolution image Warranty: Two Years
IFOV
(Spatial Resolution) Temperature
Item No. Mfr. No. (mRad) Measurement Thermal Sensitivity
-20 °C to 1,000 °C ≤ 0.05 °C @ 30 °C
112984153 FLK-TIX580 60HZ 0.93
(-4 °F to 1,832 °F) target temp. (50 mK)
-20 °C to 650 °C ≤ 0.075 °C @ 30 °C
115610907 FLK-TIX501 60HZ 0.93
(-4 °F to 1,202 °F) target temp. (75 mK)
Visual IR Thermometer
Features:
• Visual image and infrared heat map blending identify the exact
Milliamp Process Clamp Meter
location of the potential issue by blending the visual image with the The milliamp clamp meters are engineered to accurately measure the minute amounts
heat map overlay at 0%, 25%, 50%, 75% and 100% infrared with of current (4 to 20 mA signals) that flow through control system circuits, without
one button having to shut down the system, break the circuit and insert a test instrument. Instead,
• NEAR and FAR mode aligns the visual and thermal lenses to sensitive current clamps placed on the wire detect and measure the current flowing
correctly identify the location of the issue through. Fluke is the only manufacturer making process mA clamp meters that don’t
• Center measurement box – See the exact area of temperature break the loop. These precision tools are designed for instrumentation technicians,
measurement right on the screen contractors and process vendors who install and commission instruments, process and
• Temperature alarms and automated monitoring features identify automation technicians, commercial electricians and automation specialists who do mA
intermittent problems by monitoring equipment over time or get loop troubleshooting on process control circuits, instruments and automation I/O.
alerts when a temperature is outside the expected range
• Hot and cold markers – Instantly identify hottest and coldest spots
within the field of view Features:
• Save in .bmp or .is2 format – Choose .bmp when all you want is the • Measure mA signals for PLC and control system analog I/O
image, or use .is2 format that can be edited in SmartView® software • Measure 4 to 20 mA output signals from transmitters without
• SmartView® reporting software optimizes the image blending and breaking the loop
palette and quickly creates professional reports • Resolution and sensitivity to 0.01 mA, accuracy 0.2%
• Pocket-size design is handy when you need it; easily fits in your • Dual backlit display with both mA measurement and percent of span
tool bag or pocket • Measurement spotlight illuminates hard to see wires in *
• Intuitive interface – Get to work as soon as you take it out dark enclosures
of the box • Detachable clamp with one meter cable
• Hard or soft case – Protect your visual IR thermometer with a soft • 772 and 773: mA source, simulate and supply 24 V loop power; test
case (VT04A) or hard case (VT04) mA input devices and troubleshooting/calibrating 4 to 20 mA loops
• Battery choices – Choose your preferred way of powering your • 773 only: DC voltage source and measure; test voltage input
visual IR thermometer: 4 AA batteries (VT04A) or a rechargeable FLUKE-773 devices and measure 24 V loop power supplies; advanced
Li-ion battery (VT04) troubleshooting functions
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 41
Hand, Power & Analytical Tools
AC/DC Clamp On Meter A3001 FC Wireless iFlex®
AC Current Module
Features:
• Fully functional True-RMS current meter that
wirelessly relays measurements to smart phones,
tablets and other Fluke Connect™ enabled master units
(Fluke 3000 FC DMM, Fluke Ti200/300/400 thermal
camera, PC via optional pc3000 FC adapter, Fluke
Connect™ mobile app)
• Allows you to measure around awkward sized
conductors or get into tight spaces and makes wire
access easier, measure up to 2500 A AC, use as a
standalone meter or as part of the system, logging
function for recording and saving up to 65,000
readings, inrush function and magnetic hanging strap
Without iFlex™ With iFlex™
AC Amps
Item No. Mfr. No. Max. AC Amps Accuracy Battery Size
Features:
• Fluke Connect (FC) models, connect your meter to your smart phone with Fluke 111024522 FLK-A3001FC 600 3% + 5 digits 2 AA
Connect measurements
• iFlex flexible current probe expands the measurement range to 2,500 A AC
• True-RMS AC voltage and current for accurate measurements on non-linear signals
• MIN, MAX, AVG and inrush recording to capture variations automatically
• Integrated low pass filter and state-of-the-art signal processing allows for use in 3000 FC General
noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor Maintenance System
starting current exactly as the circuit protection sees it Fluke 3000 FC General Maintenance System Kit lets you work on electrical panels
• Ergonomic design fits in your hand and can be used while wearing faster, safer, easier. Connect the remote modules, view readings from a distance.
protective equipment
• Large, easy-to-read backlight display automatically sets the correct measurement
range so you do not need to change the switch positions while taking a measurement
• Conforms to EN/IEC 61010-1:2001; 1000 V CAT III, 600 V CAT IV
• Three-year warranty
• Includes soft carrying case
Max. Max.
AC AC Amps AC Battery Frequency
Item No. Mfr. No. Amps Accuracy Volts Size Measurement
112084937 FLUKE-375 FCb 600.0 2% ± 5 Counts 600 2 AA Yes
112084938 FLUKE-374 FCb 600.0 3% ±5 Counts 1,000 2 AA No
112084936 FLUKE-376 FCc 999.9 1.5% ± 5 Counts 1,000 2 AA Yes Features:
101527375 FLUKE-381a,c 999.9 2% ± 5 Counts 1,000 3 AAA Yes • The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect™ app has all the
a
Includes a remote display. essentials for convenient test and measurement troubleshooting:
b
iFlex™ flexible current probe compatible. Max. AC Amps with iFlex™ is 2,500 amps. » AC and DC voltage measurements to 1,000 V
c
iFlex™ flexible current probe included. Max. AC Amps with iFlex™ is 2,500 amps. » AC and DC current with 0.01 mA resolution
» Continuity, resistance, diode test, capacitance and frequency measurements
» MIN/MAX recording
» CAT III 1,000 V, Cat IV 600 V; IP54
• The Fluke v3000 FC Wireless AC Voltage Module offers:
» Measurements up to 1,000 V True-RMS AC
A3000 FC Wireless AC » A logging function for recording and saving up to 65,000 readings
Current Clamp Module • The Fluke v3001 FC Wireless DC Voltage Module lets you:
Features: » Measure up to 1,000 V DC
• Fully functional True-RMS current clamp meter that wirelessly » Use the logging function for recording and saving up to 65,000 readings
relays measurements to smart phones, tablets and other Fluke • The Fluke a3001 FC Wireless iFlex® AC Current Module allows you to measure around
Connect™ enabled master units (Fluke 3000 FC DMM, Fluke awkward sized conductors or get into tight spaces and makes wire access easier:
Ti200/300/400 infrared camera, PC via optional pc3000 FC adapter, » Measure up to 2,500 A AC
Fluke Connect Mobile app) » Use as a standalone meter or as part of the system
• Has all the essentials for convenient test and measurement » Logging function for recording and saving up to 65,000 readings
troubleshooting, including True-RMS AC clamp meter, measures • Inrush function
up to 400 A AC, use as a standalone meter or as part of the system,
logging function for recording and saving up to 65,000 readings Includes:
and inrush function • 3000 FC Series Wireless Multimeter with the Fluke Connect™ app
• v3000 FC Wireless AC Voltage Module
• v3001 FC Wireless DC Voltage Module
• a3001 FC Wireless iFlex® AC Current Module
Frequency
Max. AC Max. AC AC Volts Battery Measurement
Item No. Mfr. No. Amps Volts Accuracy Size (Hz) Item No. Mfr. No.
111024250 FLK-A3000FC 400 1,000 2% + 5 digits 2 AA 50/60 111024247 FLK-3000FC GM
42 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
170 Series Digital Multimeter 80 Series V Industrial
Multimeter
Versatile meters for field service or bench repair. These meters have the features Features:
needed to repair most electrical and electronic problems. They are simple to use and • Unique function for accurate voltage and frequency measurements
have significant improvements over Fluke’s original 70 Series like true-RMS, more on adjustable speed drives
measurement functions, conformance to the latest safety standards and a much larger • True-RMS AC voltage and current for accurate measurements on
display that’s easier to view. non-linear signals
Features: • Built-in thermometer allows temperature readings without having
• Wide 1,000 V measurement range to carry a separate instrument
• True-RMS for precise measurement of nonlinear signals • Peak capture to record transients as fast as 250 µs
• 0.09% accuracy • 4 1/2 digit mode
• 10 A continuous • Large display digits and two level bright white backlight for
• Frequency and capacitance increased visibility
• Resistance and continuity • Withstands hazardous 8,000 V spikes caused by load switching and faults on
• Temperature industrial circuits
• Large display • Relative mode to remove test lead resistance from low ohms measurements
• Backlight for work in dim areas • Auto and manual ranging for maximum flexibility
• Min/Max to record signal functions • Analog bar graph
• Integral holster with probe holders • Resistance, continuity and diode test
• Free your hands with the optional TPAK magnetic hanger • Magnetic hanger for easy setup
• Auto and manual ranging and viewing while freeing your Max. DC Volts: 1,000 V
• Limited lifetime warranty hands for other tasks available Max. AC Volts: 1,000 V
• Cat III 1,000 V, CAT IV 600 V measurement category • E2 option Max. DC Amps: 10 A
• UL® and CSA approved • CAT IV 600 V rated Max. Frequency: 200 kHz
• CAT III 1,000 V rated Max. Capacitance: 10,000 uF
Includes:
• Test leads Item No. Mfr. No.
• Battery 101943401 FLUKE-87-5
• Manual Max. AC Volts: 1,000
• Temperature probe Max. DC Volts: 1,000
Item No. Mfr. No. AC Volts Accuracy DC Volts Accuracy Fluke 279 FC TRMS Thermal
101774434 FLUKE-179ESFP (1.0% + 3) (0.09% + 2) Multimeter
101763281 FLUKE-177 ESFP (2.0% + 3) (0.09% + 2) Features:
101762855 FLUKE-175 ESFP (2.0% + 3) (0.15% + 2) • Full featured multimeter with built-in thermal imager
• 15 measurement functions including: AC voltage with low-pass
filter, DC voltage, resistance, continuity, capacitance, diode test,
min/max/avg, AC current (with iFlex), frequency
• Thermal imaging reveals many electrical issues quickly and safely,
True-RMS Digital Multimeter eliminating the need for time-consuming testing and validation
• Two-in-one tool is designed to increase productivity – no need to
Features: go back to the truck or office to retrieve a shared camera or wait
• True-RMS for accurate measurements on nonlinear loads for the thermographer – do more in less time
• Large display and white LED back light to work in poorly lit • iFlex expands your measurement capabilities – get into tight,
areas more effectively hard-to-reach spaces for current measurement (up to 2,500 A AC)
• Compact ergonomic design for one-handed operation • Save measurements and images while communicating wirelessly with a smart phone
• Min/max/average to record signal fluctuations up to 20 ft (6.1 m) away (no obstructions)
• Resistance and continuity • Image resolution – 80 x 60
• CAT III 600 V rated • 3.5” (8.89 cm) color LCD screen
• UL® and CSA approved • Rechargeable lithium-ion battery allows for a full work day (10+ hours)
under normal conditions
Max. AC Volts: 600 V • Assembled in the USA
Max. DC Volts: 600 V • Three-year standard warranty
• Auto power off to save battery power
Max.
AC Volts DC Volts Auto Volt/ Current
• CAT III 1,000 V, CAT IV 600 V measurement category Max. AC Amps: 2,500
• Designed for durability, built to withstand a 3 m Max. Capacitance: 9,999 µF
Item No. Mfr. No. Accuracy Accuracy Volt Alert LoZ (A) Max. AC/DC Volts: 1,000
(9.8 ft) drop, double insulated with raised rubber
102181323 FLUKE-114 (1.0% + 3) (0.5% + 2) No Yes 10 holster for increased protection Frequency: 100 kHz
101761399 FLUKE-115 (1.0% + 3) (0.7% + 2) No No 10
101763280 FLUKE-117 (1.0% + 3) (0.7% + 2) Yes Yes 10 Item No. Mfr. No.
102157421 FLUKE-116 (1.9% + 3) (0.9% + 1) No Yes 10 112593845 FLUKE-279FC
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 43
Hand, Power & Analytical Tools
Electrical Tester With 1507 Insulation
FieldSense Technology Resistance Tester
Features: Features:
• FieldSense technology for AC voltage, current • Insulation resistance testing/megaohm meter at 50 VDC, 100 VDC,
and frequency measurement without making 250 VDC, 500 VDC and 1,000 VDC
electrical contact to live voltage • Save both time and money with automatic calculation of polarization
• True-RMS voltage and current index and dielectric absorption ratio
• Works with wires up to AWG 4/0 (120 mm²) • Make repetitive tests simple and easy with the 1507’s compare
with a 17.8 mm jaw opening (pass/fail) function
• HOLD button temporarily freezes the reading • Repetitive or hard-to-reach testing is easy with the remote test probe
for easy viewing • Live circuit detection prevents insulation test if voltage > 30 V is
• Easy-to-read display with backlight detected for added user protection
• Accepts optional Fluke TPAK Magnetic Meter • Auto discharge of capacitive voltage for added user protection
Hanger for convenient operation • Measure AC/DC voltage: 0.1 V to 600 V
• Standard two-year warranty; extendable to • 200 mA Low Ohms/Continuity
four years through product registration within • Resistance: 0.01 Ω to 20.00 kΩ
4910331 4910269 45 days of purchase • Save battery power with auto power off
Battery Size: 2 AA • Read measurements easily with large, backlit display
• CAT IV 600 V overvoltage category rating for added user protection
Max. Volts Max. Volts • Remote probe, test leads, probes and alligator clips included with
Item No. Mfr. No. AC DC each tester
113808906 4910331 600 600 • Accepts optional Fluke TPAK magnetic hanging system to free your
113808811 4910269 1,000 1,000 hands for other work
• Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1,000
insulation tests
• One-year warranty
44 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
3561 FC Vibration 830 Laser Shaft
Sensor Alignment Tool
Features: Features:
• Wireless, compact sensors for a scalable remote • Single laser measurement technology means reduced
monitoring solution errors from backlash, resulting in better data accuracy
• Alarms based on user defined or Fluke Overall • Intuitive guided user interface quickly and easily
Vibration Severity (FOVS) scale thresholds completes machine alignments
• Capture rate: one data point every 90 seconds • Compass measurement mode enables flexible, reliable
• Visualize data with software trending and graphing and repeatable measurements using an activated
• Remotely view real time and historical triaxial electronic inclinometer
vibration, surface temperature data • Dynamic machine tolerance check provides
• Choose from one- or three-year software licenses continuous evaluation of alignment adjustments so
(where applicable) you know when your machine is in acceptable range
• Battery life: three years (varies by usage) • Unique extend mode handles gross misalignment by
• Bluetooth type: Low Energy 4.1 virtually increasing laser detector size
• IP 67 Rating • Data protection ensures your data is there when you
need it with auto save and resume capability
Frequency Range: 10 Hz to 1,000 Hz Laser: AlGainP Semiconductor Laser
Operating Temperature Range: -30 °C to 80 °C (-20 °F to 176 °F)
Operating Altitude: 2,000 m Battery Size Laser Power
Item No. Mfr. No. (V) (mW)
111005832 FLUKE-830 7.4 1
Item No. Mfr. No. Includes
(4) Fluke 3561 FC vibration sensors
114784559 FLK-3561 FC KIT One-year subscription to Fluke ConnectTM app
(available via free download)
PulseTM Sensor
(4) Fluke 3561 FC vibration sensors
(1) Fluke 3502 FC gateway Features:
114784560 FLK-3561/3502 FC
One-year subscription to Fluke ConnectTM app
• Velocity, acceleration enveloping and temperature measurements
(available via free download)
• Bluetooth communication with tablets, smart phones, smart watches
(4) Fluke 3561 FC vibration sensors • Easy to use sensor and apps
114784562 FLK-3561 FC 3YR Three-year subscription to Fluke ConnectTM app • Easy to understand indications of machine condition
(available via free download) • Rugged industrial design – Drop test 1,8 m (6 ft), water and dust
(4) Fluke 3561 FC vibration sensors resistant (IP65)
114784733 FLK-3561/3502 FC 3YR
(1) Fluke 3502 FC gateway • Rechargeable lithium battery (8 hours normal usage)
Three-year subscription to Fluke ConnectTM app • Option to connect, store and share data on the Cloud
(available via free download) • Option to connect directly to SKF Remote Diagnostic Services
• Apps for both iOS and Android devices
• Gets you started quickly
• Can be used with minimum training and experience
• Identify developing rotating machinery issues before they become
problems
780 Series ProcessMeter™ • Connect directly to expert advice when you need it
• Expand functionality via apps to grow and complement your existing
maintenance program
LCD display with larger digits and an excellent viewing angle. Backlit display with
on/off controls. Automatic Touch Hold® captures stable nonzero readings. Min/Max Use With: Bluetooth Phones and Tablets
records minimum, maximum and average readings. Improved EMI shielding provides Monitors:
stable reading near electrically noisy devices. • Acceleration • Temperature • Velocity
Features:
• Fast and easy to attach
FLUKE-787 FLUKE-789 • Aligns grooves of the pulley rather than its face
• Facilitates simultaneous adjustment of tension
Features: and alignment
• 24 V loop power supply
• 0 to 100% mA span check buttons to toggle between 4 and 20 mA
• 1,200 ohm drive capability on mA source
• HART mode setting with loop power (adds 250 ohm resistor)
• DMM and loop calibrator in one tool
• Precision 1,000 V, 440 mA digital multimeter TKBA 20
• 20 mA DC current source/loop calibrator/simulator
• Diode test and continuity beeper Max.
• Min/Max records minimum, maximum and average readings Operating
• Automatic Touch Hold® captures stable nonzero readings Distance
• 1,000 V overload protection Item No. Mfr. No. (ft) Includes
• Frequency measurement to 20 kHz 110587283 TKBA 10 10
TKBA 10 transmitter unit
• Meets IEC 61010-1 standards for CAT III Max. AC Amps: 1 A TKBA 10 receiver unit
1,000 V and CAT IV 600 V Max. AC/DC Volts: 1,000 TKBA 20 transmitter unit
111899582 TKBA 20 20
TKBA 20 receiver unit
Item No. Mfr. No. Battery Size TKBA 40 transmitter unit
102210181 FLUKE-787 9V 110621672 TKBA 40 20 TKBA 40 receiver unit
101851633 FLUKE-789 4 AA (4) sizes of V-guides, 3 of each size
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 45
Hand, Power & Analytical Tools
Laser Shaft Alignment Tool
TKSA 11 TKSA 41
Features:
• Live view of the instrument and motor position makes the measurement and Features:
horizontal alignment intuitive and easy • Wireless communication improves instrument handling and allows alignment of
• The TKSA 11 App offers a fully functional demonstration mode, allowing the difficult-to-reach applications from a safe position
complete alignment process to be experienced without the need to purchase the • Free measurement allows alignment measurements to start at any angle and finish
TKSA 11 with an angular sweep of just 90°
• The TKSA 11 is designed to give a fast return on its investment and is also affordable • Automatic measurement enables hands-free measurements by detecting the head
for almost every budget position and taking a measurement when the heads are rotated into the right position
• Mobile devices allow high resolution graphics, intuitive usage, automatic software • Automatic reports are generated after each alignment and can be customized with
updates and display unit choice notes and pictures from the built-in camera for the most comprehensive overview
• By using inductive proximity sensors, the measurement is no longer affected by • Live view supports intuitive measurements and facilitates horizontal and vertical
bright sunlight, influence of backlash is reduced and the instrument becomes more alignments
robust; enabling the TKSA 11 to deliver highly accurate and reliable alignment • Machine library gives an overview of all machines and alignment reports
• Automatic alignment reports give a complete overview of the alignment process and • QR codes can be used to further simplify machine identification and improve the
results; reports can easily be shared via email or cloud services alignment workflow
Max. Max.
Operating Shaft Dia. Operating Shaft Dia.
Distance Range Distance Range
Item No. Mfr. No. Interface (in) (in) Item No. Mfr. No. Interface (ft) (in)
111419585 TKSA 11 Android iOS 7.3 0.8 to 6.3 111272739 TKSA 41 Touch Screen 13.1 0.8 to 5.9
Features:
Features: • Well known, three-position measurement gains additional flexibility as measurements
• Easy measurements can be performed by using the well-known three position can start at any angle and require a total minimal rotation of only 40°; enables
measurement (9-12-3 o’clock) with additional positioning flexibility of 40° around operators to perform alignments on applications with limited space
each measurement position • Alignment reports are generated automatically and can be customized with notes,
• High affordability is achieved by focusing on the standard shaft alignment process a machine picture and a signature via touchscreen; reports can be exported as PDF
and essential functions to allow quick and effective shaft alignments files and shared with other mobile apps
• “Automatic measurement” enables hands-free measurements by detecting the • A range of included components, such as magnetic mounting brackets and extension
position of the heads and only taking a measurement when the heads are in the rods and chains, increases the TKSA 51’s versatility, yet it remains compact,
right position lightweight and easy to carry
• Automatic reports are generated after each alignment and can be customized with • 3D live view enables intuitive positioning of heads for quick alignment measurements
notes about the application; all reports can be exported as pdf files and displays live when horizontal/vertical alignment correction is achieved
• Live view supports intuitive measurements and facilitates horizontal and vertical • Measurement values are averaged over time to provide accuracy in presence of
machine position corrections vibration or other external disturbances
• The machine library gives an overview of all machines and alignment reports; • The app can be downloaded easily, and its demonstration mode allows the shaft
simplifies the machine identification and improves the alignment workflow alignment process to be experienced before purchasing the TKSA 51
Max. Max.
Operating Shaft Dia. Operating Shaft Dia.
Distance Range Distance Range
Item No. Mfr. No. Interface (ft) (in) Item No. Mfr. No. Interface (ft) (in)
111863832 TKSA 31 Touch Screen 6.6 0.8 to 5.9 111863827 TKSA 51 Android iOS 16.4 0.8 to 5.9
46 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Vibration Tester TL175 TwistGuard™ Test Lead
Features:
Features: • Patented TwistGuard™ extendable tip
• On-board identification and location of the shroud meets the highest electrical safety
most common mechanical faults (bearings, requirements to reduce tip exposure while
misalignment, unbalance, looseness) focus providing the versatility needed for most
maintenance efforts on root cause, reducing measurements
unplanned downtime • New WearGuard™ lead wire wear indication;
• Fault severity scale with four severity levels helps each test lead is covered by two layers of
you prioritize maintenance work silicone insulation; inner contrasting color
• Repair recommendations advise technicians on corrective action is exposed when the leads are nicked,
• On-board context-sensitive help provides real-time tips and guidance to new users scuffed or otherwise damaged and in need of
• 2 GB expandable on-board memory provides enough space for your machinery’s data replacement
• Self-test function ensures optimal performance and more time on the job • Double-insulated silicone leads withstand high temperatures and remain flexible in
• Laser tachometer for accurate machine running speed promotes confident diagnoses cold temperatures
• Tri-axial accelerometer reduces measurement time by 2/3 over single • Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000
axis accelerometers bends without failure
• Viewer PC software expands data storage and tracking capacity • Universal input plugs are compatible with all instruments that accept standard 4 mm
• Troubleshoot problem equipment and understand the root cause of failure shrouded banana plugs
• Survey equipment before and after planned maintenance and confirm the repair • Ratings: CAT II 1,000 V, CAT III 1,000 V, CAT IV 600 V, 10 A max., pollution degree 2
• Commission new equipment and ensure proper installation • Probes always show correct category rating for tip being used
• Provide quantifiable proof of equipment condition and drive investment in repair • Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)
or replacement • Conforms to EN61010-031
• Prioritize and plan repair activities and operate more efficiently • One-year warranty
• Anticipate equipment failures before they happen and take control of spare • 1,000 V CAT III, 600 V CAT IV, Category III
parts inventories
• Train new or less-experienced technicians and build confidence and skill across
the team Item No. Mfr. No. Insulation Tip Material
Range Type: Automatic 102232566 TL175 Full Insulated Hard Alloy
Usable Bandwidth: 2 Hz to 20 kHz
Sampling Rate: 2.5 kHz to 50 kHz
Sampling: 51.2 Hz
FFT Resolution: 800 Lines
RPM Range
Item No. Mfr. No. (rpm) Micro CA-150 Inspection Camera
101463746 FLUKE-810 200 to 12,000
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 47
Hand, Power & Analytical Tools
SeeSnake® Micro Inspection Soft Carrying Case
Camera Extension Cable
Cable Length
Item No. Mfr. No. (ft) For Series: 20, 50, 70, 80, 110, 120, 170, 180, 780
102166212 37113 6 Dimensions: 8.6 in x 5 in x 2.52 in
Features:
• Combine components to meet most hanging needs Size Resolution Accuracy
• Attaches to back of 110, 170, 180, 720 series, 50 series II Item No. Mfr. No. (in) (in) (in) Thimble Mechanism
thermometers and 80 series volt meters 114948530 293-348-30 0 to 1 0.00005 ±0.00005 Friction Thimble
111191250 293-330-30a,b 0 to 1 0.00005 ±0.00005 Ratchet Stop
Includes: 113919242 293-340-30 0 to 1 0.00005 ±0.00005 Ratchet Stop
• Universal hanger 114188375 293-344-30 0 to 1 0.00005 ±0.00005 Ratchet Thimble
• Hook-and-loop hanger straps 114948529 293-349-30 0 to 1 0.00010 ±0.00010 Ratchet Thimble
• Magnet
114948531 293-341-30 1 to 2 0.00005 ±0.00005 Ratchet Stop w/ Standard
114948527 293-331-30a,b 1 to 2 0.00005 ±0.00005 Ratchet Stop w/ Standard
For Series: 50-II, 80-V, 110, 170, 180, 720 114948528 293-345-30 1 to 2 0.00005 ±0.00005
Ratchet Thimble
w/ Standard
Item No. Mfr. No. a
U-Wave Fit compatible.
101735384 TPAK b
Output: SPC.
48 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Features: Features:
• The latest version of digimatic output, d2, allows output to a resolution of 1 • Sealed housing is IP-67 rated, meaning it’s immune to the coolants, dirt, grit and
millionths of an inch chips found in many manufacturing environments
• The high accuracy MDH with 5 millionths resolution can be output in its entirety in • Easy to use – no need to wipe or clean the scale
both inch and metric • 0.0005”/0.01 mm resolution with ±0.001” accuracy
• Resulting data can be input directly to Excel, MeasurLink® or other SPC programs • Automatic power-on/off
with optional data management hardware • Certificate of inspection provided
• Enabling 0.000005”/ 0.0001 mm resolution measurement, this micrometer is ideal
for those who need to make highly accurate measurements with a handheld tool Non-Output Style SPC Output Style
• The ABS (absolute) rotary sensor eliminates the need to perform origin setting each Size
time the power is turned on, allowing you to start measuring right away (in) Item No. Mfr. No. Item No. Mfr. No.
• With no possibility of over speed errors, the high accuracy digimatic micrometer 0 to 6 113189849 500-752-20 113440457 500-762-20a
delivers a higher level of reliability 0 to 8 112784110 500-753-20 113358022 500-763-20a
• Certificate of inspection provided 0 to 12 112784081 500-754-10b 114948525 500-764-10c
a
U-Wave Fit compatible.
Size Resolution Accuracy b
±0.0015” accuracy.
Item No. Mfr. No. (in) (in) (in) c
±0.0015” accuracy. U-Wave Fit compatible.
114948751 293-130-10 0 to 1 0.000005 ±0.00002
Features:
• Compatible with any Mitutoyo tool that has SPC
Features:
output (additional digimatic cable is required)
• Electromagnetic inductive sensor improves environmental resistance against dirt,
water and oil
• A battery life of approximately 3.5 years has been achieved under normal use through
the adoption of Mitutoyo’s ABSOLUTE scale
Item No. Mfr. No. • The slider configuration features an ergonomic, thumb friendly shape
• Step measurement capable
114948750 264-016-10 • The data output function allows integration into statistical process control and
measurement systems
• Display character height: 9 mm
• AOS applies to 4”, 6” and 8” models
• Resolution: 0.0005”/0.01 mm
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 49
Hand, Power & Analytical Tools
Dial Indicator
Features:
• Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access
• No-clutch structure for automatic reversal of measuring direction
• One-piece bezel and crystal design with O-ring provide resistance to water and dust
• The glare-free flat crystal face has a scratch-resistant coating
• High sensitivity and quick response because of jeweled bearings
• Basic Set: indicator, contact point (0.079” dia.), knurled clamp ring, stem (3/8” dia.)
• Full Set: indicator, contact points (0.039”, 0.079”, 0.118” dia.), knurled clamp ring, stems (0.157”, 3/8” dia.), swivel clamp, holding bar
Features:
• Similar in size to series 2 dial
indicators
• Large, easy-to-read LCD
• Go/no-go judgment can be performed
Features: by setting upper and lower tolerance
• Dial movement designed for ultra smooth sliding and high shock protection limits
• Improved finish on sliding surfaces for longevity • The judgment result (go/no-go) can be
• New face for improved readability displayed in
• Lock screw for dial bezel and for holding the sliding jaw position full-size characters
• Can measure OD, ID, depth and steps • The positive/negative count resulting
• Models available with carbide-tipped OD and ID jaws from the spindle’s up/down movement
• Supplied in fitted plastic case can be toggled
Dial Color: White (unless noted)
• Internal calculations using the simple
Range Per Revolution: 0.1 in
543-392 543-472B 543-492B formula of [F(x) = Ax)]
Size are available
Range Accuracy Graduation • Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle
(in) (in) (in) Item No. Mfr. No. “Absolute Position” from the origin at power-on
116584209 505-738a • Unlimited response speed eliminates over speed errors
• The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
113117488 505-742
0 to 6 ±0.001 0.001 • With SPC data output
116584210 505-742-51b
116584211 505-742-56c Stem Dia.: 3/8 in
0 to 8 ±0.002 0.001 112038139 505-743 Thread Size: 4-48 UNF
0 to 12 ±0.002 0.001 112038137 505-746
Graduation Measuring
a
Jaw Type: Carbide Tipped. Resolution Range Accuracy Force
b
Dial Color: Blue. (in) (in) (in) (N) Item No. Mfr. No.
c
Dial Color: Black. Dial Color: White (unless noted)
Range Per Revolution: 0.2 in 116584258 543-392a
1/2 0.0001 ≤ 1.5
112327871 543-392Bb
0.00005
Size 1 0.0001 ≤ 1.8 110874149 543-472Bb
Range Accuracy Graduation 2 0.0002 ≤ 2.3 111944516 543-492Bb
(in) (in) (in) Item No. Mfr. No. 0.0005 1/2 0.0010 ≤ 0.9 111216935 543-402Bb
0 to 6 ±0.001 0.001 112037874 505-740 a
With lug back.
0 to 12 ±0.002 0.001 112037821 505-749 b
With flat back.
50 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
*
ID-S Digital Indicator
Features:
• Combines safety, reliability and durability
• Performs in light- to medium-duty industrial applications
• Weston style, double pawl brake design splits the load to opposite Bandit™ Ratchet Lever Hoist
sides of the ratchet gear for greater load security
• Patented Brake Wear Indicator increases safety by letting you know Features:
when to replace the friction disks • Standard lifts up to 20 feet (longer lifts are available)
• Industrial rated alloy steel hooks rotate 360° for easy rigging • The world’s first HMI certified ratchet lever hoist with
• Hooks slowly stretch to indicate an overload situation increasing RFID technology
jobsite safety • Rugged, yet lightweight, design and construction can be easily
• Available in 1/4 ton to 6 ton capacities with standard lifts of 5, 10, 15 transported and used in even the most confining spaces
and 20 ft (custom lifts available) • Easy free chaining feature allows for quick take up and
positioning of slack chain; designed not to accidentally free chain
while under load
• 360° rotating handle allows for versatile rigging options when
Capacity Headroom Lift Height working in tight spaces
Item No. Mfr. No. (tons) (in) (ft) • Double reduction gearing provides easy operation with low
112594439 287100 0.25 8.3 5.0 handle effort
112594440 287101 0.25 8.3 10.0 • Screwed-on comfortable rubber grip makes for a secure hold in
112594441 287102 0.25 8.3 15.0 all environments
• Enclosed Weston-type load brake stays clean and dry for positive
112594442 287200 0.50 10.0 5.0
load positioning
112594483 287201 050 10.0 10.0 • Upper and lower hooks feature standard forged safety latches
112594484 287202 0.50 10.0 15.0 that provide positive and secure load engagement
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. • Upper and lower hooks feature extra wide throat openings to allow for easier
attachment to pick points
• Hooks swivel 360° for faster positioning
• Impact-resistant stamped steel housing withstands repeated rigorous use
• Standard powder coat finish on housing and zinc plating on major components for
Medium-Duty Balancer extra protection against corrosion when working in harsh environments
• 100% load tested gold chromate chain
• Proven chain integrity and corrosion resistance
Features: • Each unit has a unique serial number for easy and accurate identification
• Rugged construction, cast aluminium body • Shipyard hooks are available as an option on 1 1/2 ton units
• Adjustable capacity • Optional internal load limiter alerts operator of possible overload by allowing the
• Adjustable stroke limiting device handle to rotate without lifting a higher-than-capacity load
• Safety device prevents dropping of load due to spring breakage • Lifetime warranty
• Meets ASME B30.21
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 51
Hand, Power & Analytical Tools
Hurricane 360° Hand Chain Hoist Series 622 Hand Chain Hoist
Features:
Features: • Simple, efficient, economical design
• Patented hand chain cover rotates a full 360 degrees, allowing loads to • Equipped with hardened load chain for flexibility and long wear
be lifted, positioned or pulled from virtually any angle • Compact design, low headroom and lightweight steel construction for easy
• Standard load limiter for simple, automatic overload protection installation, even in confined spaces
• Weston-style braking system provides reliable positive load control • Weston-type load brake requires no lubrication
• Powder-coated finish for corrosion protection • Hand wheel cover with guide slots minimizes jamming and slipping
• All internal gears and pinions are heat-treated steel for high strength • Forged swivel hooks with latches reduce twisting of chain and
and long life unintentional unhooking of load when chain is slack
• Chain guide and stripper assure load chain alignment • Standard hand chain drop is 2 ft less than lift (example: 10 ft lift hoist has
• Precision four-pocket lift wheel - fully machined for better chain fit and 8 ft hand chain drop)
reduced wear allowing for accurate movement of the load chain • One-year warranty
• Hardened alloy steel load chain assures high strength and long • Metric rated
wear life • Imported
• Minimal maintenance - easily disassembled, requiring no special tools
• Lifetime warranty against defects in materials and workmanship Pull to Lift
• Meets ASME B30.16 and European CE standard Capacity Lift Height Headroom Load
Item No. Mfr. No. (tons) (ft) (in) (lb)
103854752 2255 1/2 10 11.6 53
110354812 2208 1/2 15 11.6 53
Pull to Lift 103857292 2231 1/2 20 11.6 53
Capacity Lift Height Headroom Load 103900382 2256 1 10 13.0 77
Item No. Mfr. No. (tons) (ft) (in) (lb)
103857551 2210 1 15 13.0 77
103857555 5623A 1/2 10 11.8 44 103856863 2262 1 20 13.0 77
110354848 5625A 1/2 20 11.8 44 110354816 2258 2 10 18.1 82
110354849 5626A 1 10 13.2 54 110354813 2213 2 15 18.1 82
111129684 5627A 1 15 13.2 54 103900381 2233 2 20 18.1 82
111129693 5629A 2 10 15.6 74 110354814 2214 3 20 21.9 65
111129692 5631A 2 20 15.6 74 110317433 2260 5 10 23.9 105
110354620 5635A 3 10 20.5 92
110354851 5637A 3 20 20.5 92
110354732 5639A 5 10 25.7 76 Tornado 360° Ratchet
110354852
110354734
5641A
5643A
5
10
20
10
25.7
32.5
76
102
Lever Hoist
110354735 5644A 10 20 32.5 102
Features:
• Unique foldable handle and 360° rotating lever increase
114454708 HU15000H10 15 10 43.5 76
productivity while reducing the risk of operator injury
114454706 HU15000H20 15 20 43.5 76 • Easy-to-use, highly visible directional indicator located on the
114454736 HU20000H10 20 10 43.5 102 handle clearly shows the operating direction as lifting,
114454712 HU20000H20 20 20 43.5 102 lowering or neutral
• Enclosed Weston-type brake stays clean and dry for precise
load positioning
• Lightweight aluminum housing withstands rigorous use and
features high quality, long-lasting bearings
• Powder coat finish provides extra protection in
harsh environments
• Robust chain guide and chain stripper made from cast steel and
KL Kinetic Series zinc-plated for corrosion protection
Lever Hoist • Bolt-on hooks with nylon locks help users comply with ASME
B30.21 and B30.10 inspection requirements
Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for • With a three-year brake warranty; if the brake discs wear
the harshest of environments and deliver exceptional durability to meet your out within three years from the date of purchase, Columbus
toughest demands. McKinnon will replace the ratchet disc assembly free of charge
• Each unit has a unique serial number for easy and
accurate identification
Features: • Lifetime warranty
• Premium grade 100, electro-galvanized chain designed for • Meets ASME B30.21
exceptional corrosion resistance for increased durability
Chain Pull to Lift Rated Standard
• Full bearing construction for reduced chain pull effort and Rated Load Capacity Lift
longer life Item No. Mfr. No. (lb) (tons) (ft)
• Heavy-duty cast hook latches designed for less latch
replacements 113525414 TOR07505 47 3/4 5
• Corrosion-resistant finish for additional durability 113486972 TOR07510 47 3/4 10
• Compact design for the tightest of spaces 113525372 TOR07515 47 3/4 15
113525413 TOR07520 47 3/4 20
113525422 TOR15005 61 1 1/2 5
113235359 TOR15010 61 1 1/2 10
113525420 TOR15015 61 1 1/2 15
113525421 TOR15020 61 1 1/2 20
Chain Pull 113525461 TOR30005 90 3 5
to Lift Rated Standard 113525458 TOR30010 90 3 10
Rated Load Capacity Lift No. of 113525459 TOR30015 90 3 15
Item No. Mfr. No. (lb) (tons) (ft) Falls 113525460 TOR30020 90 3 20
111890987 KL075-10 48 0.8 10 1 113525473 TOR60005 93 6 5
112753664 KL100-10 68 1.1 10 1 113525470 TOR60010 93 6 10
110825215 KL150-10 68 1.7 10 1 113525471 TOR60015 93 6 15
112939273 KL300-10 84 3.3 10 1 113525472 TOR60020 93 6 20
111191714 KL600-10 86 6.6 10 2 115656405 TOR90005 113 9 5
116056372 KL900-10 88 9.9 10 3 115656407 TOR90010 113 9 10
Additional configurations available. Please contact your local Applied® service center for 115656409 TOR90015 113 9 15
more details. 115656411 TOR90020 113 9 20
52 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Coffing JLC Electric Chain Hoist
Features:
• Standard push button drop is 4 ft less than lift ARO 7700 & 7900 Series Air Chain Hoist
• Panel plate provides easy access to controls and motor
leads for changing voltage on dual voltage motors or
servicing the hoist
• Multiple disc motor brake with direct acting design for The ARO 7700 and 7790 Series was designed specifically for heavy-duty industrial
positive load spotting and holding applications. Simple, rugged and reliable, these hoists are constructed with few
• Five-pocket load sheave increases chain and sheave moving parts for easy repair and less downtime.
engagement 25% over hoists with conventional
four-pocket sheaves
• Adjustable limit switches regulate upper and lower load travel
• Mechanical overload protection device protects hoist,
operator and supporting structures from damaging overloads,
chain jamming and reverse phasing Features:
• Oil bath transmission and precision machined alloy steel • Ideal for high-duty cycles and when operating loads are
gears for longer, quieter operation near maximum capacity
• Ergonomic design fits operator’s hand for thumb or • Exceptional slow-speed control provides superior
two-handed operation standard “spotting” characteristics
• Compact aluminum frame housing designed for portability • Motor and gearing provide faster lift speeds with low
and ease of installation air consumption
• Lifetime warranty • Powerful, self-cooling rotary motors keep hoists at peak
• CSA approved performance at high temperatures
Capacity • Brake control easily adjusts to meet specific load ranges
Wt. Lift Height Headroom • Meets ASME B30.16 specifications
Phase Voltage (tons) (ft) (in) Item No. Mfr. No.
10 18.1 110355172 08221W
0.50 15 18.1 110354870 08222W
20 18.1 110355015 08223W
10 18.1 110354877 08239W Capacity
Single
115/230V 1.00 15 18.1 110354878 08240W Wt. Headroom Lift Height No. of
Phase
20 18.1 110355016 08241W Item No. Mfr. No. (lb) (in) (ft) Falls
10 20.8 110354881 08247W 105788131 7718E-2C10-C6 550 17.0 10 1
2.00 15 20.8 110355017 08248W 102194093 7756E-2C10-C6 1,100 17.0 10 1
20 20.8 110355018 08249W 105381133 7790A-2C10-C6 2,200 18.9 10 1
10 18.1 110354879 08243W 101488652 7776E-2C10-C6 2,200 21.7 10 2
1.00
Three 15 18.1 110354880 08244W 105410468 7792A-2C10-C6 4,400 22.4 10 2
230/460V
Phase 10 20.8 110354882 08251W
2.00 Additional configurations available. Please contact your local Applied® service center for
15 20.8 111129516 08252W more details.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 53
Hand, Power & Analytical Tools
Features:
• 100% duty cycle enables continuous operation
• Ideal for harsh environments, such as steel mills, foundries and Item No. Mfr. No.
electroplating operations 113742921 17-584
• Self-adjusting, air operated disc brake wear tested to over 1 million
cycles before replacement
• Simple pull-chain speed and directional controls provide precise
load-spotting capabilities
• Rated as HMI duty classification A5, severe duty
(equates to FEM 9.511 duty classification 2M)
5-in-1 Carabiner Gadget Gauge
5-in-1 carabiner gadget gauge includes 4 to 140 psi tire gauge, flashlight, glass
breaker, carabiner and bottle opener. Batteries included.
5-in-1 digital gadget gauge includes 5 to 150 psi backlit LED tire gauge, glass breaker,
seat belt cutter, flashlight and LED valve light. Batteries included.
ELK Series Electric
Chain Hoist
The Ingersoll Rand ELK Series Electric hoist brings you durability, modularity and Item No. Mfr. No.
flexibility packed in an extremely lightweight, modern design. Built to meet an H4 duty 113742919 17-582
cycle classification, the ELK hoist is designed for tough, industrial grade applications.
Features:
• H4 duty cycle rating (minimum 2m
FEM/M5 ISO) designed for both industrial
and manufacturing applications 9-in-1 Digital Gadget Gauge
• Modular design with interchangeable gear box for
reduced maintenance time, parts and complexity
• Lightweight, compact profile allows for faster, safer 9-in-1 digital gadget gauge includes 5 to 150 psi backlit LED tire gauge, glass breaker,
installation and disassembly seat belt cutter, light and folding tools. Batteries included.
• Built-in motor with cooling fins and fan wheel
for reduction in operating temperature and
disassembly time
Item No. Mfr. No.
• Rated as HMI duty classification A5, severe duty
(equates to FEM 9.511 duty classification 2M) 113742918 17-581
Rated Lift
Digital Tire Pressure & Tread
Capacity Headroom Height Depth Gauge
(tons) (in) (ft) Item No. Mfr. No.
10 115478685 47661354001 Proper tire inflation maximizes performance and fuel economy, which
is easy to monitor with the large backlit digital display and comfort grip
1/4 15.0 15 115478686 47661355001
design of this durable gauge. Red, yellow and green indicators for easy
20 115478687 47661356001 tread depth recognition. Batteries included.
10 115478697 47661366001
1/2 19.2 15 115478698 47661367001
20 115478699 47661368001
10 115478709 47661378001
1 24.2 15 115478710 47661379001
20 115478711 47661380001
Item No. Mfr. No.
Additional configurations available. Please contact your local Applied® service center for
more details. 113742917 17-557
54 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power & Analytical Tools
Inflator Gauge
The 17-877 has a robust pistol grip handle with two-stage trigger for inflation and deflation. Complete with 20” swivel hose with a
bend restrictor and clip-on chuck. The 17-878 is complete with an air bleeder valve, 13.5” hose and 6” straight-on dual foot chuck
for extended reach.
Inflator
Features:
• Dial Inflator
» Seven-minute inflation
» LED light
» Includes a sports ball needle and two inflator
nozzles
• Top-Off Mini Inflator
» Ten-minute inflation
16-227 16-230 16-237
» Compact for storage and portability
• Digital Inflator
» Seven-minute inflation
» Smart Flate™ preset inflating technology
» Includes sports ball needle and two inflator nozzles
• Rechargeable Heavy-Duty Inflator
» Six-minute inflation
» Heavy-duty lithium-ion battery
» Two stage inflator/blower function
» Flashlight and USB/12 V charging ports
• Heavy-Duty Digital Inflator
» Three-minute inflation
» Heavy-duty direct drive motor
» Detachable digital gauge
» Carry bag for easy storage
16-240 16-245 16-250
• Tankless Wall-Mount Inflator
» Three-minute inflation
» Smart Flate™ preset inflating technology
» 25’ detachable poly recoil hose and clip-on chuck
Overall
Battery Reach
Item No. Mfr. No. Type (V) (ft)
115054283 16-227 Dial Inflator 12 9.5
113749218 16-230 Top-Off Mini Inflator 12 9.0
115054242 16-237 Digital Inflator 12 10.0
113749220 16-240 Rechargeable Heavy-Duty Inflator 12 12.0
113742916 16-245 Heavy Duty Digital Inflator 12 30.5
113749221 16-250 Tankless Wall-Mount Inflator 120 25.0
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 55
Hand, Power & Analytical Tools
WWW.MILWAUKEETOOL.COM
56 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Safety Products
Safety
Products
2
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
DURHAM MFG
®
Pneumatic 9
Est. 1922 Products
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
...and more!
Equipment
Index,
INDEX
Service Center
Directory
Safety Products
R I B U T E D E XC LU S I V E LY
D I ST BY
Leaders in
Hand Protection and PPE
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
21/22
Personal Protective Products
Disinfectant Boot Baths............................................................76
Eye Protection......................................................................58-59
Gloves..................................................................................62-69
Headgear & Faceshields..................................................59-60,62
Hearing Protection...............................................................59-60
Hydration..................................................................................69
Insect Repellants.......................................................................69
Protective Clothing.........................................................66,69-70
Respiratory Protection & Accessories...................................60-61
Safety Caps..........................................................................61-62
Steeves.....................................................................................66
Safety Products
Cabinets...............................................................................74-75
Can Disposal Systems...............................................................73
Cans, Drums & Accessories..................................................73-74
Industrial Mats & Matting....................................................75-76
Lockouts, Stations & Kits......................................................70-72
Padlocks....................................................................................70
Spill Control Products
Absorbents...........................................................................78-80
Booms..................................................................................78,80
Containment Berms..................................................................82
Containment Socks..............................................................78,80
Pads, Rolls & Sheets.............................................................76-80
Pallets..................................................................................81-82
Spill Kits....................................................................................81
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Features:
• Oversized frame and lens to fit over
prescription glasses
• Dielectric design, no metal parts
• Five position ratchet action temple allows
lens angle adjustment
• Exclusive Duramass® scratch resistant
Features: coating
• Relaxed bridge design to fit the vast majority of users • Rugged polycarbonate lens filters 99.9%
• Thin, flexible temples provide secure fit without uncomfortable pressure points of harmful UV rays
• Lightweight, rimless design provides all day user comfort
• Lens variety assures a style for every application
• Base curve = 9.5 Nose Bridge: Polycarbonate
• Meets ANSI Z87.1+ high impact requirements
Lens Lens
Nose Bridge: Saddle Color Coating Item No. Mfr. No.
Frame Type: Polycarbonate Clear Duramass® Anti-Fog 111181569 OG110AF
Frame Lens Lens
Color Color Coating Item No. Mfr. No.
Clear Hard Coat 111659264 250-01-0000
Black
Gray Hard Coat 111659263 250-01-0001
Hard Coat 111659330 250-01-0900
Clear Clear Hard Coat, Anti-Fog 111659347 250-01-0920
Swagger® Safety Glasses
Uncoated 111659346 250-01-0980
Features:
• Next generation inspired design built for all
environments
Jackson Safety* V60 • Dielectric (no metal parts)
Nemesis* RX Safety Eyewear • Lightweight and balanced frame with zero
removable parts
Features: • Rugged polycarbonate lens filters 99.9% of
• Cheater style lens with diopters for vision assistance harmful UV rays
• Larger wraparound lens for added impact protection • Meets or exceeds ANSI Z87+ high impact
• Enhanced nosepiece design for added comfort standard
• Neck cord included • Applications not only include industrial work
• Meets ANSI Z87.1+ 2010 impact standard settings, but also those favorite places you
• 99.9% UV protection enjoy when not working
58 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 59
Safety Products
Pura-Fit® Foam Earplugs 3M™ Particulate Respirators, N95
These classic disposable N95 particulate respirators are designed to help
provide comfortable, reliable worker respiratory protection against certain
non-oil based particles. Those featuring 3M™ Cool Flow™ Valve are ideally
suited for hot/dusty work settings or long periods of wear.
Features:
• Advanced electrostatic media is designed for ease
of breathing
• 8210V and 8511 feature proprietary 3M™ Cool
6800 Flow™ valve which helps reduce heat build-up
inside the respirator
• Applications include: woodworking, grinding,
sanding, sweeping, bagging and other dusty
operations
• Compatible with a variety
of protective eyewear and Mask Type: Disposable
6900 6845 6882 Strap: Elastic
hearing protection
Features:
• Longer length for easy fitting and removal Item No. Mfr. No. Style No. Pkg. Qty. (Pieces)
• Tapered for easy insertion in any size ear canal 101879184 50-051138-46457-3 8210 20
• Non-irritating, smooth surface for added comfort 114809792 00-051131-49711-5a 8210V 10
• Bright green color is a symbol of Moldex® quality 101871812 50-051138-54343-8b 8511, N95 10
Noise Reduction Rating: 33 dB
a
Includes 3M™ Cool Flow™ exhaustion valve.
Pkg. Qty. b
Includes 3M™ Cool Flow™ exhaustion valve and an M-Noseclip.
Item No. Mfr. No. Cord Package Type (Pair)
111154828 6800 No Pouch 200 3M™ 5000 Series Half
111154776 6900 Yes Polybag 100 Facepiece Respirator
111154774 6845 No Plugstation® 500
111154768 6882 Yes Plugstation® 150 The 3M™ 5000 Series Half Facepiece Disposable Respirator Assembly with
Organic Vapor and P95 Particulate Filters, Respiratory Protection (51P71,
52P71, 53P71) helps provide protection against certain airborne contaminants.
This Half Facepiece respirator may be used in a variety of workplace
SparkPlugs® Multi-Color applications, including spray painting, pesticides, agriculture, construction and
transportation. This disposable respirator assembly offers greater convenience
Foam Earplugs by reducing the need for long-term maintenance. This half facepiece respirator
is an ideal choice for intermittent use.
Features:
• NIOSH approved for respiratory protection
against certain organic vapors and particulates
• Disposable model helps reduce maintenance
issues for greater convenience
6604 • Lightweight well-balanced design enhances
comfort
• Multi-purpose respirator assembly works in a
variety of workplace applications
Item No. Mfr. No. Size Strap
102193506 50-051138-66068-5 Small Rubber
102171813 50-051138-66069-2 Medium Polyisoprene with Polyester Braid
6654 6645 6880 102173263 50-051138-66070-8 Large Polyisoprene with Polyester Braid
Features:
• Highest independently tested NRR N95 Particulate Respirator
• Extra soft, low pressure foam for comfort and fit
• Tapered shape for easy insertion and removal Features:
• Shaped to fit even very small ear canals • Dura-Mesh® shell resists collapsing in heat and humidity
• Non-irritating smooth surface • Molded nose bridge seals easily without a metal
• Look for the exclusive colored streaks and swirls noseband
as a symbol of Moldex® quality Noise Reduction Rating: 33 dB • Facepiece is naturally contoured without pressure points
• Softspun® lining for increased comfort and durability
Pkg. Qty. • Soft foam nose cushion for added comfort
Item No. Mfr. No. Cord Package Type (Pair) • Meets heat and flame resistance in accordance with
ANSI/ISEA 110-2003 section 7.11.1
111154677 6604 No Bag 200
• 100% PVC-Free®
111154727 6654 Yes Bag 100
111154803 6645 No Plugstation® 500 Item No. Mfr. No. Size Exhale Valve
111154770 6880 Yes Plugstation® 150 111154733 2201N95 Small No
111154726 2301N95 Small Yes
111154708 2300N95 Medium/Large Yes
111154735 2200N95 Medium/Large No
These hearing protectors help reduce exposure to hazardous noise and other loud sounds.
Misuse or failure to wear hearing protectors at all times that you are exposed to noise may These respirators help protect against certain airborne contaminants.
result in hearing loss or injury. For proper use, see supervisor, User Instructions, or call Before use, the wearer must read and understand the USER
3M in U.S.A. at 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414. If Instructions provided as a part of the product packaging. A written respiratory
there is any drainage from your ear or if you have a hole in your eardrum, consult with your protection program must be implemented meeting all the requirements of OSHA
physician before wearing earplugs. Failure to do so may result in hearing loss or injury.
1910.134 including training, fit testing and medical evaluation. In Canada, CSA
standards Z94.4 requirements must be met and/or requirements of the applicable
NOTE: The NRR may overestimate the protection provided during typical use. 3M jurisdiction, as appropriate. Misuse may result in sickness or death. For proper
recommends reducing the NRR by 50% for estimating the amount of noise reduction use, see packaging instructions, superior, or call 3M OH&ESD Technical Service in
provided. USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
60 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
AirWave® Disposable Respirator 7000/9000 Series Cartridges,
Filters & Accessories
Features:
• NIOSH approved for most common gas/
vapors
• Use the 8910 N95 filter or the 8970 R95
filter with the 7020 pre-filter retainer and any
gas/vapor cartridge
• P100 particulate filter disks allow for wider
field of vision because of low profile design
4200/4201 • Piggyback the 7940 P100 particulate filter
Features: disk with any Moldex® gas/vapor cartridge
• Patented easy breathing, low using the 7920 piggyback adaptor
resistance wave design • Meets heat and flame resistance in
4600/4601 4800 accordance with ANSI/ISEA 110-2003
• More air and more comfort
mean more wear and compliance Section 7.11.1
• Soft, cloth SmartStrap® allows you to adjust for a custom fit • 100% PVC-Free®
(4600 and 4800 series only)
• Dura-Mesh® shell resists collapsing in heat and humidity Item No. Mfr. No. Type
• Meets heat and flame resistance in accordance with ANSI/ISEA 111154799 7100 Organic Vapor Cartridge
110-2003 section 7.11.1 111154798 7200 Acid Gas Cartridge
• 100% PVC-Free® 111154797 7300 Organic Vapor/Acid Gas Cartridge
Nose Flange 111154796 7400 Ammonia Methylamine Cartridge
Latex Strap Cloth Strap 111154795 7500 Formaldehyde Cartridge
111154794 7600 Multi-Gas/Vapor Smart® Cartridge
Size Item No. Mfr. No. Item No. Mfr. No.
111154788 7140a Organic Vapor Cartridge/P100
Small 111154661 4201 111154694 4601 111154787 7640b Multi-Gas/Vapor Smart® Cartridge/P100
Medium/Large 111154670 4200 111154684 4600 111154778 7940 P100 Filter Disk
111154791 7960 P100 Filter Disk plus Nuisance Organic Vapors
Full Flange – Plus Relief from Nuisance Levels of Organic Vapors & Ozone 111154804 7990 P100 Cartridge
Cloth Strap 111154704 8970 R95 Particulate Pre-Filter
Size Item No. Mfr. No. 111154705 8910 N95 Particulate Pre-Filter
Medium/Large 111154693 4800 111154793 7920 Filter Disk Piggyback Adapter
111154789 7020 Pre-Filter Retainer
a
NIOSH approved for organic vapors.
7000 Series Half Mask Respirator b
NIOSH approved for organic vapors, ammonia, methylamine, chlorine, hydrogen chloride,
sulfur dioxide, chlorine dioxide, hydrogen fluoride, formaldehyde and hydrogen sulfide.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 61
Safety Products
Features:
• Ultra lightweight shell made with polycarbonate/ABS
material provides superior protection
• Four-point nylon webbing suspension Features:
• SURE-LOCK wheel ratchet adjustable suspension for • 5 mil thickness
maximum comfort • Beaded cuff
• Universal accessory slots accept virtually any competitors’ • Fully textured
accessories • Ambidextrous
• Ideal for working at heights or confined space applications • Made from component materials that comply with
where vertical and horizontal impact protection is needed federal regulations for food contact 21CFR, 170-199
• Foam liner helps protect against lateral impact
• Meets CSA Z94.1-15 & ANSI Z89.1-2014 type II, class E
requirements
Style: Cap 62-322PF Color: White
Adjusting Method: Ratchet Cuff Type: Beaded
Pkg. Qty.: 100
Item No. Mfr. No. Color
Disposable Latex Disposable Latex, Powder Free
116385026 280-HP142R-01 White
Glove Size Item No. Mfr. No. Item No. Mfr. No.
Small 111660890 62-322/S 111660927 62-322PF/S
Medium 111660891 62-322/M 111660925 62-322PF/M
Large 111660892 62-322/L 111660976 62-322PF/L
Headgear X-Large 111660889 62-322/XL 111660996 62-322PF/XL
Features:
• 4 mil thickness
• Economical puncture resistance with great comfort,
Material: Durable Polypropylene dexterity and tactile sensitivity
• Contains no natural rubber latex proteins
Item No. Mfr. No. Color • Ambidextrous
113044073 251-01-5400 Blue • Made from component materials that comply with federal
regulations for food contact 21CFR, 170-199
62 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
6112PF Nitrile N-DEX® 8050PF Gloves
Disposable Gloves
Features:
• Medical examination glove
Features: • Tear-away feature in case of emergency break
• 100% nitrile • Thicker glove provides more resistance to chemicals
• Decreased risk of allergies • Ideal for chemical splash protection
• High performance of protection • Low modulus nitrile formulation
• Second skin fit and feel • Second-skin feel significantly reduces hand fatigue
• Biodegradable
Material: Nitrile
• Contains SHOWA’s EBT ingredient
Glove Type: Chemical Resistant
Pkg. Qty.: 50
Glove Type: Disposable Nitrile, Powder Free Item No. Mfr. No. Glove Size
Pkg. Qty.: 100 113876948 8050PFXS X-Small
113876949 8050PFS Small
Item No. Mfr. No. Glove Size 113876950 8050PFM Medium
113877024 6112PFXS X-Small 113876951 8050PFL Large
113877025 6112PFS Small 113876952 8050PFXL X-Large
113877026 6112PFM Medium 113877023 8050PFXXL 2X-Large
113877027 6112PFL Large
113877028 6112PFXL X-Large
113877029 6112PFXXL 2X-Large
Chemical-Resistant Gloves
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 63
Safety Products
Features:
• Fully coated nitrile
• Resists hydrochloric acid (37%) - Level 6 breakthrough
Features:
time EN374
• 15 gauge seamless knit spandex liner with HPPE
• Scalloped edge
• ANSI/ISEA 105-16: Level A4 (minimum 1,500 g)
• Rough finish over entire surface
• EN 388:2016 Cut Level D
• Without special treatment
• Contact heat level 1
• Anatomical shape
• FDA and EU food contact approved
• Cut and sewn
• Lightweight, supple liner with breathable open back design
• A flexible glove that absorbs perspiration, for
ultra comfortable extended wear and with good
mechanical resistance
Color: Gray • Protects the hand from oils, hydrocarbons, grease and
Glove Type: Cut Resistant abrasion, with effective long lasting grip
Material: HPPE • Impermeable for working in damp or greasy environments
• Surface provides tactile feel and better grip
Item No. Mfr. No. Glove Size • Lower allergy risks
117364322 234X-06 Small
• Designed for easy movement and Color: Blue
continuous wear Material: Nitrile
117364323 234X-07 Medium
• Wrist well protected Cuff Type: Gauntlet
117364324 234X-08 Large
117364325 234X-09 X-Large
Length: 14 in
117364326 234X-10 2X-Large Item No. Mfr. No. Glove Size
111036561 NSK24-08 Small
111036562 NSK24-09 Medium
111036563 NSK24-10 Large
111036564 NSK24-11 X-Large
Neoprene Coated Gloves
Features:
• Nap-in for better abrasion resistance
Applications:
• Use for light protection in construction, farming Color: Natural
PVC Coated Gloves and automotive applications Material: Cotton/Polyester
Canvas Double Palm Cuff Type: Knitwrist
64 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Supported Chemical
Resistant Gloves 4561 Cut-Resistant Gloves
Features:
• Great dexterity
• Semirough grip provides Features:
economical, enhanced • Cut resistant: Level D (EN 388:2016)
wet grip • Liner is reinforced with Kevlar® for improved cut resistance
• Kevlar® liner is inherently flame resistant
Applications: • Lightweight, 15 gauge breathable liner allows warm air and
• Acids moisture from inside to escape, keeping hands dry and
• Caustics and alcohols comfortable
• Handling oils • ZORB-IT® sponge nitrile palm absorbs oil and grease to
• Petrochemical and refining increase grip and durability in oily environments
• Manufactured using SHOWA’s patented hand former design for
Color: Black a comfortable fit and to minimize hand fatigue
58-8030R 58-8040 Glove Size: Men’s • Seamless knitted liner prevents irritation
Cuff Type: Slip-On • ANSI cut level A4
Pkg. Qty.: 12
Length
Glove Material (in) Item No. Mfr. No. Item No. Mfr. No. Glove Size
12 111676095 58-8030R 113797013 4561S-06 Small
PVC Coated - Rough
14 111676100 58-8040R 113796952 4561M-07 Medium
12 111676093 58-8030 113796951 4561L-08 Large
PVC Coated - Smooth
14 111676098 58-8040 113796950 4561XL-09 X-Large
113796949 4561XXL-10 2X-Large
Item No. Mfr. No. Glove Size Item No. Mfr. No. Glove Size
111036635 300S-07 Small 116174208 257S-06 Small
111036636 300M-08 Medium 116174207 257M-07 Medium
111036637 300L-09 Large 116174206 257L-08 Large
111036638 300XL-10 X-Large 116174205 257XL-09 X-Large
111036639 300XXL-11 2X-Large 116174204 257XXL-10 2X-Large
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 65
Safety Products
Features:
• Embossed microporous nitrile palm finish
• High abrasion resistance level 4
• Ultra lightweight: 19 g
• Palm thickness : 0.90 mm
• Unique SHOWA ergonomic shape that replicates the
natural curve of the human hand
Color: Black/Grey
Glove Type: General Purpose
Material: Microfiber 82-7563 83-6563 84-7532
Coating: Foam Nitrile Best Quality Better Quality Good Quality
Features:
Item No. Mfr. No. Glove Size • Constructed of various grades of cowhide, pigskin and/or fabric
114467436 381S-06 Small • Cotton lined palm for extra comfort
114467435 381M-07 Medium • Elastic closure sewn inside glove for safety and comfort
114467433 381L-08 Large • Leather knucklestrap and fingertips for extra protection
114467432 381XL-09 X-Large • Use for construction, material handling and general maintenance
114467425 381XXL-10 2X-Large
Good Quality Cuff Type: Safety Cuff
Featuring Showa’s patented Hagane Coil® fiber technology, the Better Quality
S-TEX® 303 provides excellent cut resistance with unmatched
dexterity. The combination of a stainless steel core and DuPont™ Glove Size Material Color Item No. Mfr. No.
Kevlar®’s proven cut resistance results in the ultimate hand Small Cowhide/Fabric Gray/Blue & Pink 111678781 83-6563/S
protection from cuts and lacerations. The open back design Medium Cowhide/Fabric Gray/Blue & Pink 111678780 83-6563/M
offers comfort and flexibility. The natural rubber palm coating Large Cowhide/Fabric Gray/Blue & Pink 111678779 83-6563/L
ensures excellent wet/dry grip. X-Large Cowhide/Fabric Gray/Blue & Pink 111678782 83-6563/XL
Features: 2X-Large Cowhide/Fabric Gray/Blue & Pink 111678814 83-6563/XXL
• ANSI cut level A6
Material: Hagane Coil® Fiber Best Quality
Coating: Natural Rubber
Glove Type: Cut Resistant Glove Size Material Color Item No. Mfr. No.
Cowhide Gray/Blue & Green 111678729 82-7563/M
Medium
Item No. Mfr. No. Glove Size Pigskin Natural/Blue 111676610 78-3927/Ma
111036875 S-TEX303S-07 Small Cowhide Gray/Blue & Green 111678605 82-7563/L
Large
111036876 S-TEX303M-08 Medium Pigskin Natural/Blue 111676609 78-3927/La
111036877 S-TEX303L-09 Large Cowhide Gray/Blue & Green 111678730 82-7563/XL
X-Large
111036878 S-TEX303XL-10 X-Large Pigskin Natural/Blue 111676611 78-3927/XLa
a
Insulated work glove.
Cut-Resistant Sleeve
Technical Training
Properly trained maintenance workers
prevent and reduce costly equipment
downtime. MaintenancePRO® courses from
10-KS14
Applied Industrial Technologies offer training
Features:
• Provides excellent protection for wrists and arms on maintenance, troubleshooting, component
• Custom designs with thumb hole and tack provide application and failure analysis. Courses can
better fit and protection
• Double-ply styles for extra cut and heat protection also be customized to specific needs.
Compliances: Weight: Medium
• ANSI A3 Color: Yellow
Material: Kevlar®
Sleeve Type: Kevlar® Tube Knit
66 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Driver’s Gloves
Features:
• Consistent grading and superior workmanship
• Excellent dexterity and abrasion resistance
• All leather top grain cowhide construction
• Wide range of styles, patterns and grades for use in a broad range of applications
• Styles with keystone thumb patterns provide extra comfort and wear
Applications:
• Use in construction, machine operation, light-duty welding, utility work, farming,
roping and many other general applications
68-103 68-163 70-301
Color: Natural
Features: Applications: Cowhide Leather Driver Cuff Type: Slip-On
• Will return to its original pliability • Construction
even after being soaked in water • Machine operation Item No. Mfr. No. Glove Size Thumb Type
• Utility work 111677992 68-103/S Small Straight
• Farming 111677991 68-103/M Medium Straight
• Roping 111677990 68-103/L Large Straight
Pigskin Driver
111678023 68-103/XL X-Large Straight
Item No. Mfr. No. Glove Size Thumb Type 111677633 68-163/S Small Keystone
111677776 70-301/S Small Straight 111677658 68-163/M Medium Keystone
111677775 70-301/M Medium Straight 111677611 68-163/L Large Keystone
111677774 70-301/L Large Straight 111677589 68-163/XL X-Large Keystone
111677777 70-301/XL X-Large Straight 111677636 68-163/XXL 2X-Large Keystone
The Original®
Despite its imitators, The Original® glove remains in a category all its own. Tried, tested and proven for over 25 years, it provides the perfect blend of
flexibility and protection. The Original’s durable synthetic leather palm and breathable TrekDry® back-of-hand combine to create the ultimate tool for
hardworking hands. A new tapered TPR closure and increasingly stronger hook and loop provide a secure fit to the wrist. With a gamut of practical
uses, it’s no surprise that The Original® is the most recognized and most frequently worn work glove by anyone with a toolbox.
Features:
• Adjustable Thermoplastic Rubber (TPR) closure creates a secure fit to your wrist Color: Black
• Reinforced thumb and index finger improve durability Glove Type: Multi-Purpose
• Touchscreen capable synthetic leather provides the perfect blend of dexterity and durability Material: Synthetic Leather
• Machine washable Cuff Style: Hook & Loop
• CE/EN388 3121X
Black
Applications: Glove Size Item No. Mfr. No.
• Multipurpose Medium 101530173 MG-05-009
• Maintenance and repair
Large 101516641 MG-05-010
• Equipment operation
• DIY home improvement X-Large 101544344 MG-05-011
2X-Large 101539610 MG-05-012
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 67
Safety Products
M-Pact® Open Cuff E5 Gloves
FastFit® Glove
The next generation of FastFit® work gloves are here. Take control with high The open cuff M-Pact® E5 protects working hands with CE Level E and ANSI A5 cut
dexterity, 0.6 mm synthetic leather and stay connected with touchscreen resistance in the workplace. The palm and fingers are protected by an internal layer of
technology in the palm of your hands. The FastFit delivers an unmatched fit with high tenacity Armortex® to prevent abrasions and lacerations when working with sharp
TrekDry™ evaporative cooling to keep your hands cool and comfortable. tools and sharp materials. Sonic welded Thermoplastic Rubber (TPR) protects the top
of the hand from crushing and pinching injuries. D3O® technology in the palm absorbs
Features: and dissipates high impact energy to reduce hand fatigue as the day goes on.
• Stretch elastic cuffs create a secure fit
• Reinforced thumb and index finger support added durability Features:
• Anatomically designed two-piece palm design eliminates • Thermoplastic Rubber (TPR) pinch point fingertip protection
material bunching • Comfortable stretch elastic cuff creates a secure fit
• Pinched fingertip construction improves fingertip strength • Breathable TrekDry® keeps your hands cool and comfortable
and durability • Reflective print provides eye catching luminance in low
• High dexterity, synthetic leather infused with touchscreen light environments
technology • Armortex® palm reinforcement supports added durability
• Machine washable • High tenacity Armortex® liner protects the palm with EN 388:
• CE/EN388 2121X 2016 Level E and ANSI A5 cut resistance
• Durable synthetic leather infused with touchscreen technology
Applications: • D3O® palm padding absorbs impact and vibration
• General purpose • Machine washable
• Maintenance and repair Color: Black Applications:
• Equipment operation Glove Type: Multi-Purpose • Construction
• DIY home improvement Material: Synthetic Leather • Heavy equipment operation
Cuff Style: Open Cuff • Towing and transportation Color: Flourescent Yellow
Cuff Style: Open Cuff
Black
Glove Size Item No. Mfr. No. Item No. Mfr. No. Glove Size
Medium 101530176 MFF-05-009 114703651 SMC-C91-009 Medium
Large 101534899 MFF-05-010 114703652 SMC-C91-010 Large
X-Large 101537019 MFF-05-011 114703653 SMC-C91-011 X-Large
2X-Large 101515678 MFF-05-012 114703654 SMC-C91-012 2X-Large
The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose
applications for various industrial, construction and MRO applications. As a comprehensive line of hand protection,
G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut-resistant
glove is tested to both ANSI and EN standards, and test scores are readily available on each product’s webpage.
Nitrile Polyurethane
Nitrile Polyurethane
ANSI Cut Level 2 ANSI Cut Level 4 ANSI Cut Level 2 ANSI Cut Level 3
Glove Size Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
X-Small 111673885 16-330/XS 111673911 16-350/XS 113043778 16-150/XS 111673937 16-530/XS
Small 111673883 16-330/S 111673909 16-350/S 113043777 16-150/S 111673935 16-530/S
Medium 111674156 16-330/M 111673908 16-350/M 112803441 16-150/M 111673934 16-530/M
Large 111674351 16-330/L 111673862 16-350/L 112027692 16-150/L 111673933 16-530/L
X-Large 111673884 16-330/XL 111673910 16-350/XL 112338305 16-150/XL 111673936 16-530/XL
2X-Large 111673886 16-330/XXL 111673912 16-350/XXL 112699131 16-150/XXL 111673938 16-530/XXL
3X-Large — — — — 112801118 16-150/XXXL — —
Applied.com/register
68 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Insect Repellent
Safety Cut Pro® Gloves
Repels biting insects up to twice as long as common consumer insect
repellents. Protects outdoor workers by reducing risk of Lyme disease from
Features: ticks and mosquitoes that transmit dengue and the Zika virus when sprayed
• 18 gauge HyperMax™ shell on exposed skin and clothing.
• Outstanding dexterity and overall comfort
Features:
• Black nitrile foam coated palm and fingertips
• Contains 25% DEET
• Reinforced thumb crotch
• Safety Data Label (S.D.[L]®) right on the can
• Touchscreen friendly
• CARB: Complies with VOC regulations as detailed by the California
• Great abrasion resistance and grip
Material: HyperMax® Air Resource Board
• Excellent comfort, durability
Thumb Type: Reinforced • OTC: Complies with VOC regulations as detailed by the Ozone
and sense of touch
Coating: Foam Nitrile Transport Commission
• Dark color hides dirt and grime
Gauge: 18 • LADCO: Complies with VOC regulations as detailed by the Lake
Michigan Air Directors Consortium
Item No. Mfr. No. Glove Size
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
116524556 9278NFXS X-Small
117415638 9278NFS Small Applications:
117415639 9278NFM Medium • For any outdoor worker exposed to insects around:
117415640 9278NFL Large • Installation sites
116524555 9278NFXL X-Large • Electric and power utility areas
116524557 9278NFXXL 2X-Large • Bridge and tower maintenance areas
• Cable and wire installation sites
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. • Industrial plant grounds
• Warehouses
KleenGuard* A20 • Farm structures and building
Breathable Particle
Protection Coveralls Item No. Mfr. No.
Size
(oz)
Net Wt.
(oz) Container
101849929 14011 8 6 Aerosol
Features:
• Seamless front provides more WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
protection in the primary exposure areas
• Zipper flap
• Breathable SMS fabric with serged
seams
Sqwincher® Sqweeze® Pops
• Reflex* design provides 12% more
chest room and 6% longer body length
• 4x, 5x and 6x sizes available with added
lead time Sqwincher® Sqweeze® freezer pops give you a
• NFPA 99-compliant, antistatic material unique way to replace electrolytes lost during
• Ideal for manufacturing and food physical work or overheating, served frozen to
processing areas cool the body’s core temperature and help relieve
• Ideal for heavy dirt and dust symptoms of heat stress and fatigue. Sqweeze®
environments ZERO are sugar free.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 69
Safety Products
Features:
• Meet ANSI 107 class 3 standards with minimum
1,240 in² of background material and 310 in² of retro
reflective material
• 100% polyester mesh for maximum cool comfort
• Available with zipper closure or hook and loop closure
• Pocketed
• 2” reflective tape for superior visibility
Features:
Applications: • Bright molded-in colors for durability and easy identification
• Ideal for use in work conditions that require high visibility safety apparel be worn, • Special trilingual safety lockout markings and labels
such as roadway construction workers, survey crews, construction vehicle operators, • Nonconductive Zenex™ body
utility workers, railway workers, emergency • Extra long standard steel shackle for added versatility Shackle Width: 25/32 in
response personnel Color: Yellow • Six-pin tumbler cylinder for greater security Shackle Dia.: 1/4 in
Pockets/Pouches: 8 • Key-retaining feature ensures that padlocks are Body Width: 1 1/2 in
Reflective Tape: Yes not left unlocked Body Height: 1 3/4 in
• Custom laser engraving available Lock Type: Keyed Different
Item No. Mfr. No. Size
113044284 303-MVGZ4P-LY/S Small Shackle Length
102378485 303-MVGZ4P-LY/M Medium Item No. Mfr. No. (in)
102376830 303-MVGZ4P-LY/L Large 101842996 410RED 1 1/2
102378487 303-MVGZ4P-LY/XL X-Large 101892870 410LTRED 3
102376371 303-MVGZ4P-LY/2X 2X-Large
102377510 303-MVGZ4P-LY/3X 3X-Large
102379500 303-MVGZ4P-LY/4X 4X-Large
102384427 303-MVGZ4P-LY/5X 5X-Large
Safety Lockout
Magnum® Padlock
Features:
• Stainless steel cover for exceptional weatherability
• Laminated steel body for superior strength
• Chrome plated octagonal boron carbide shackle
• Dual ball bearing locking mechanism Search Shop Find
• Four-pin cylinder prevents picking
Products Trusted Brands Solutions
70 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Color: Red
Material: Stainless Steel
Features:
Features: • Cable lockout with adjustable steel or nylon cable
• Patented 5/32” (4 mm) diameter x 6 ft (1.83 m) • Patented 1/8” (3.3 mm) diameter x 9’ (2.74 m) cable
pull tight cable adjusts for a secure fit every time features a plastic coating (nylon - yellow, steel - red) for
• Integrated safety hasp and cable is ideal for added durability and visibility
multiple circuit breaker panel and side-by-side • Cable reel acts as cable management system to allow
gate valve lockouts for easier application and protected storage of the cable
• Tough, flexible multi-stranded steel cable is • Tough, lightweight thermoplastic body withstands
insulated with a clear plastic coating (PVC-free®) chemicals
• Feed the cable end through the points to be • Ergonomic design eases operation when wearing gloves
locked out, then back through the • Contoured design provides ability to stack, transport and store multiple devices
lockout body • Suitable for lockout in electrical environments
• Cinch it tight to remove any slack with the • Includes high visibility, write on safety labels in English, Spanish and French for
patented locking feature easy identification
• Tough, lightweight thermoplastic body • Additional language labels available separately
withstands chemicals • Replacement cables PKGP52709 (steel cable) and KGP52711 (nylon cable)
• Includes high visibility, reusable, write-on safety available separately; can use either cable type in same device
labels (English, French and Spanish)
• Identify the responsible person, then erase for Material: Steel/Thermoplastic
the next job Cable Dia.: 1/8 in
• Replaces 8611 adjustable cable lockout Cable Length: 9 ft
Shackle Size Cable Length Cable Dia. Item No. Mfr. No. Cable Material
Item No. Mfr. No. Color (in) (ft) (in) 113518127 S856 Steel Core
105538046 S806 Red 5/16 6 5/32 113518128 S866 Nylon Core
WARNING: This product can expose you to BPA, which is known to the State WARNING: This product can expose you to BPA, which is known to the State
of California to cause cancer, birth defects or other reproductive harm. For more of California to cause cancer, birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov. information, go to www.P65Warnings.ca.gov.
Learn more at
Applied.com/industrial-rubber-products-services
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 71
Safety Products
Features:
Safety Series™ Personal Lockout Kit
• Heavy-duty tags Set Contents for1457VE410KA
• 7/16” (11 mm) diameter brass grommet accepts
Desc. Qty.
all safety padlocks
• Complies with OSHA lockout tagout standard Padlocks
• Durable polyester laminate resists water, grease 410RED 3
and extreme temperatures 7C5RED Circuit Breaker 1
• Heavy-duty construction withstands over 50 lb Hasps
(23 kg) of pullout force 420 1
(meets OSHA requirement) 427 Snap-On 1
• Customize with name, department and Cable Lockout
expected completion S806 Adjustable 1
Gate Valve Covers
Height: 5 3/4 in 480 1
Width: 3 1/8 in 481 1
Material: Polyester Laminate Features: 482 1
• Padlocks supplied are keyed alike for added Ball Valve Lockouts
Item No. Mfr. No. Language worker convenience S3068 1
101964882 497A English • Durable, lightweight, nonconductive Xenoy® 468L Handle-Off 1
103662033 497AX English/Spanish lock bodies
Universal Wall Switch Lockout
• High visibility red locks
• Key-retaining feature ensures that padlocks 496B 2
are not left unlocked Circuit Breaker Lockouts
Safety Series™ Rotating Gate 491B 2
Valve Lockout 493B 3
Accessories
497A (12/pack) 1
Includes: S1017 Ultra-Durable Safety
• 1” to 3” dia. lockout 1
Carry Case
• 2” to 5” dia. lockout
• 4” to 6.5” dia. lockout Color: Red
• 6” to 10” dia. lockout Lock Type: Keyed Alike
• 8” to 13” dia. lockout
Features: Item No. Mfr. No.
• Outward/inward rotation allows for easier installation and storage 101946973 1457VE410KA
• Surrounds the valve operating handle to protect against accidental valve opening
• Rotates into itself to fit safety toolboxes
• Up to four workers can apply their personal safety locks
• Red lockout color identifies safety lockout applications Did You Know…
• Tough, lightweight, dielectric Xenoy®
thermoplastic bodies withstand chemicals Applied® operates in six countries on three continents.
• Performs effectively in extreme conditions Material: Dielectric Xenoy® With more than 6,000 associates, we have extensive
(-50 °F to 350 °F) No. of Pieces: 5 experience and a broad geographic reach to
Color: Red
serve a diverse customer base. We’re help
Item No. Mfr. No. to help. Visit Applied.com
101938876 485
72 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Aerosolv® Aerosol Can Recycling System
Safely convert used aerosol cans to a non-hazardous material, reducing disposal costs and minimizing waste.
Features:
• Punctured/discharged cans do not meet definition of hazardous waste EPA 40 CFR 261.23 (a)(6), and can be used as recyclable material
• Aluminum body with moving parts of 308 stainless steel
• Includes combination filter, safety goggles and anti-static ground wire with alligator clip
• Accepts standard sized cans with a max. height of 8.5” (215 mm)
• Non-spark pin punctures can, releasing residual liquids into collection drum
• Bottom cartridge converts liquid into droplets for safe drainage
• Top activated carbon filter cartridge acts as a replacement reminder
• The 28202 Aerosolv® unit must be left punctured and drained, clamped in the unit to maintain a closed container as defined by OSHA
Color: Red
7220120 7250130 Material: Steel
Hose Hose
Capacity Height O.D. Length O.D.
Item No. Mfr. No. (gal) (in) (in) (in) (in)
101858751 7220120 2 13 1/4 9 1/2 9 5/8
101858435 7250130 5 17 1/2 11 3/4 9 1
Features:
• Poly funnel slip-on for controlled pouring (sold separately)
• Premium 24-gauge coated steel construction with powder coat paint finish
• Self-closing, self-venting, built-in stainless steel flame arrester
• Larger I.D. label which provides space for user to label contents
• One opening for filling and pouring
• Meets OSHA 1910.106 and NFPA Code 1 and NFPA Code 30
• FM approved and UL®/ULC listed
7110100 7150100
Color: Red
Material: Steel
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 73
Safety Products
Oily Waste Can
Features:
• Galvanized steel body with powder coat paint finish
• Self-closing cover
• Foot lever
• Raised, flow-through base promotes air flow
• For use with solvent cloths and wiping rags
• FM approved and UL® listed
• Meets OSHA requirements Color: Red
Material: Steel
Features:
• Stores flammables safely even when available space is at a minimum
• Adjustable shelf
• Allows increased access to often-used liquids without compromising safety
• FM approved
Color: Yellow
Material: Steel
Handle Type: Recessed Handle
Capacity No. of No. of Height Depth Width Closure Type: Manual Closure Type: Self-Close
(gal) Doors Shelves (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
4 1 1 22 17 17 101413751 890400a 101406969 890420a*
12 1 1 35 18 23 1/4 101404899 891200 101407626 891220*
a
Optional wall hanger assembly available if wall mounting is desired.
* WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.
74 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Sure-Grip® EX Slimline Safety Cabinet for Flammables
Features:
• Fire tested and approved by FM Approvals; complies with OSHA and NFPA
• 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2-in (38-mm)
of insulating air space
• 3-point stainless steel bullet latching system
• U-Loc™ handle with two keys-accepts optional padlock
• Adjustable, patented SpillSlope® galvanized steel shelves direct spills to
2-in (51-mm) leak proof sump
• Trilingual warning with Haz-Alert™ reflective labels
• Includes dual vents with flame arresters, adjustable leveling feet, ground connector
• Self-closing models equipped with fusible link holds door open during use and
melts at 165° F (74° C) to automatically close under fire conditions
Color: Yellow
892200 Material: Steel
892220 Handle Type: Recessed Handle
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.
Features:
• Protects workers, reduces fire risks and improves productivity by storing hazardous liquids in code-compliant
safety cabinets
• Constructed of sturdy, 18-gauge, double-wall, welded steel with 1 1/2” of insulating air space for fire resistance
• High performance, self latching doors close easily and securely for maximum protection under fire conditions
• Fail-safe closing mechanism ensures three-point latching system works the first time, every time
• 3” incremental adjusting Spill Slope™ galvanized steel shelves directs spills to back and bottom
• Dual vents with flame arresters
• Haz-Alert™ reflective labeling offers high visibility when illuminated and trilingual warning label
• Finished inside and out with durable, lead-free epoxy/polyester powder paint for chemical resistance
• U-Loc™ pad-lockable handle with flush paddle handle and slip-resistant grip; padlock sold separately
• Nonprotruding handle and rounded corners on doors provide added protection
• Fire tested and approved by FM approvals; complies with OSHA and NFPA
Caution:
• OSHA code 29 CFR 1910.106 states that not more than 60 gallons of Category 1, 2 or 3 flammable liquids, Color: Yellow
nor 120 gallons of Category 4 flammables may be stored in a safety cabinet Material: Steel
Handle Type: Recessed Handle
Capacity No. of No. of Width Depth Height Closure Type: Manual Closure Type: Self-Close
(gal) Doors Shelves (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
30 2 1 43 18 44 101405498 893000 101405018 893020*
45 2 2 43 18 65 101405378 894500 101405380 894520*
60 2 2 34 34 65 101404714 896000 101451421 896020*
90 2 2 43 34 65 101405381 899000 101451420 899020*
* WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.
Heavy-duty rubber mat allows easy drain-through of liquid and debris. Features: Applications:
• Raised rib design provides superior traction in wet or • Food service
dry conditions • Bars
• Beveled edges reduce tripping hazard • Cafeterias
• Great drainage, aeration and worker antifatigue comfort • Industrial work stations
• Smooth surface for easier cleanup
• Rolls up with ease for cleaning Material: Heavy-Duty Rubber
Thickness: 1/2 in
Border Color: None
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 75
Safety Products
Hygienic sanitizer mat used wherever there is a concern for cross-contamination with the disinfectant solution, boot bath helps prevent contamination of your workspace.
Features:
• SBR rubber made to withstand • Can be used with any USDA accepted disinfectant sanitizer
heavy-duty usage • Provides a light-duty disinfectant solution
• Yellow raised edges for high visibility for any area (sterile environments, healthcare facilities, food
and increased safety industries, barns and stables)
• Contains 30% recycled materials
• Easy to clean and maintain Color: Black/Yellow
Width Length
Item No. Mfr. No. (ft) (ft)
117576716 BD 3239YB 32 39
WARNING: This product can expose you to chemicals including DI-(2-Ethylhexyl) Phthalate (DEHP), which is known to the State of California to
cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Comfort-King™ Supreme
Workers-Delight™ Deck Plate Anti-Fatigue Matting
Features: Features:
• Highly energized Zedlan™ sponge combines softness and resilience for • Comfort-King™ offers optimal cushion and resilience for proper fatigue relief and
exceptional relief increased productivity
• Diamond pattern vinyl surface is durable and increases productive life of mat • Highly energized Zedlan™ sponge combines softness, resilience and durability for
• Custom fabrication available designed to fit your work space needs exceptional relief
• Resistant to most common fluids and chemicals • Outwears other sponge products by nearly three to one Material: Zedlan™
• Contains up to 25% recycled material • Maintains flexibility even in low temperatures Thickness: 1/2 in
• Heavy-duty, slip-resistant surface Border Color: None
Material: Vinyl, ZedlanTM Foam Backing Color: Black
tolerates cart traffic
Thickness: 5/8 in
Width Length
Black Black & Yellow Item No. Mfr. No. (ft) (ft)
Width Length
(ft) (ft) Item No. Mfr. No. Item No. Mfr. No. 103485593 K4 0023BK 2 3
5 103513282 WD1235BK 103512224 WD1235YB 103513476 K4 0035BK 3 5
3
12 101904258 WD1232BK 103484852 WD1232YB 102397143 K4 0312BK 3 12
*
Oil-Only Responder™ Pads & Rolls
Features:
• Oil-only absorbent pads designed for fast spill response in marine environments and industries with wet
processes
• Hydrophobic melt blown polypropylene construction selectively absorbs oils, greases, gasoline and other
petroleum-based fluids while repelling water
• Floats even when completely saturated; ideal for responding to waterborne spills
• Durable, loose-stacked weave construction begins absorbing on contact for fast response
• Respond effectively to waterborne and outdoor oil spills with SpillTech Oil-Only Responder Absorbent Pads
Absorption
Length Width per Pad/Roll
Material Wt. (in) (in) (oz) Pkg. Qty. Item No. Mfr. No.
Single 19 15 22.85 200 110867520 WP200S*
Medium 19 15 34.18 100 110867518 WP100M*
Heavy 19 15 42.75 100 110867517 WP100H*
Responder™ Roll
Absorption
Length Width per Pad/Roll
Material Wt. (ft) (in) (gal) Pkg. Qty. Item No. Mfr. No.
Medium 150 30 50.70 1 110867550 WR150M
Heavy 150 30 63.40 1 110867549 WR150H
76 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
*
Oil-Only Pads & Rolls
Made from highly absorbent, melt-blown polypropylene with no chemical additives. Material is naturally hydrophobic to absorb petroleum-based fluids while
repelling water. Ideal for absorbing oils floating on water and perfect for any outdoor use as product is weather-resistant.
*
Oil-Only Defender™ Pads & Rolls
Features:
• Oil-only absorbent mat pad designed to absorb oils, gasoline, diesel and greases
• Selectively absorbs petroleum-based liquids while repelling water
• Multi-layered sonic bonded construction delivers enhanced absorption and durability
• Won’t fall apart or lose shape even when fully saturated
• Pads perforated up the center at 7.5”
• Rolls perforated every 7.5” vertically and cross-perforated every 17” horizontally for
easy custom sizing
Color: White
Defender™ Pad Defender™ Roll Material: Polypropylene
Absorption Absorption
Material Length Width per Pad/Roll Pkg. Material Length Width per Pad/Roll Pkg.
Wt. (in) (in) (oz) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Light 19 15 19.90 200 110867527 WPB200S* 1 113882484 WRSB150M-1
15 46.10
Medium 19 15 31.62 100 110867525 WPB100M* Medium 150 2 110867568 WRSB150M*
Heavy 19 15 37.25 100 110867524 WPB100H* 30 46.10 1 110867555 WRB150M
1 113882483 WRSB150H-1
15 55.20
Heavy 150 2 110867567 WRSB150H*
30 55.20 1 110867554 WRB150H
*
Universal Defender™ Pads & Rolls
Features:
• Designed for maximum versatility, the absorbent pads and rolls provide reliable performance across a wide range of
general spill control applications – including overspray cleanup, maintenance and more
• Universally absorbent design handles water, most oils and other chemicals
• Multi-layered sonic bonded construction delivers enhanced absorption and durability; won’t
fall apart or lose shape even when fully saturated
• Pads perforated up the center at 7.5”; rolls perforated every 7.5” vertically and
cross-perforated every 17” horizontally for easy custom sizing
Material: Polypropylene
Defender™ Pad Defender™ Roll Color: Gray
Absorption Absorption
Material Length Width per Pad/Roll Pkg. Material Length Width per Pad/Roll Pkg.
Wt. (in) (in) (gal) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Single 19 15 31.1 200 110867266 GPB200S* 1 113882362 GRSB150M-1
15 46.1
Medium 19 15 24.7 100 110867264 GPB100M* Medium 150 2 111323291 GRSB150M*
Heavy 19 15 29.1 100 110867263 GPB100H* 30 46.1 1 110867287 GRB150M
113882361 GRSB150H-1
15 55.2 1
Heavy 150 110867298 GRSB150H*
30 55.2 1 110867286 GRB150H
At Applied®, we know the value we provide can take many forms – from
energy savings to greener practices and other sustainability initiatives.
Learn more about our commitment to social responsibility at
Applied.com/corporate-social-responsibility
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 77
Safety Products
* †
Features:
• Absorbs up to 2 gallons per unit
Industrial Cleaner, Degreaser & Absorbent
• Immediate absorption Sucks up oils, chemicals and other nasty liquids in seconds, leaving surfaces
• Pulls oil and other contaminants right off water bone-dry.
• Ideal for spill containment and storm drain runoff
• Substantially reduces all cleanup and disposal Features:
costs • Sucks up spills and leaks instantly
• Mitigates costly fines • Leaves surface bone dry
• Sweeps up with a broom - even the broom
is dry
Applications:
• Four pound bag cleans up to two gallons
• ATF
• Works on all surfaces even dirt and water
• Crude Oil
• Saves up to 75% on cleanup and disposal costs
• Diesel
• Landfill safe in most states
• Gas
• Hydraulic Oil
• Oil Applications:
• Acids • Glue
• ATF • Grease
Height Length • Blood • Hydraulic Oil
Item No. Mfr. No. (in) (ft) Pkg. Qty. • Coolants • Ink
114964756 RD-G96 4 8 6 • Crude Oil • Paint
• Diesel • Polymers
• Gasoline • And Many More Nasty Liquids
* Capacity
Universal Bonded Pads & Rolls Absorption Volume Package Pkg.
Item No. Mfr. No. (gal) (cu ft) Type Qty.
Universal bonded pads and rolls work on all types of fluids. They are extra 113346329 RD-S* 2 0.5 Resealable Bag 14
durable to handle nonaggressive leaks and spills in high traffic areas, tool 113518987 RD-55D† 40 9.0 55 Gallon Drum 1
cribs and routine industrial applications. Dimples build strength and allow
fluid to spread through the material quicker for your best absorption rate.
Universal and
Features: Oil-Only Pillows
• Eliminates application
guesswork Features:
• Flexibility in sizing and • Absorbs high volume leaks and spills
material content • Gray Universal picks up oils, coolants, solvents or
• Incinerable water while White Oil-Only absorbs oil-based liquids
and repels water-based liquids
• Pillows are easy to place in hard-to-reach areas – use
under machines and leaky hydraulic hoses or wedge in
Applications: corners cramped for space
• Hydraulic oils • Chloroform • Pulls liquids from the floor like a sock; catches leaks
• Coolants • Benzyl chloride like a pan; absorbs spills like a pad
• Cutting fluids • Ethylene dichloride Material: Treated, Chemically
• Ideal for spill response; easy to toss into action
• Nitric acid • Diazinon Inert Polypropylene
• Large surface area speeds the absorption process and
Width Material shortens the overall response time
Type Length (in) Wt. Item No. Mfr. No.
Absorption Per Pillow: 2.3 gal
Middle 101939868 L91001* Material: Poly Blend
Bonded Perforated Pads 100 ct. 19 in 15
Heavy 101850375 L90902* Pkg. Qty.: 10
150 ft 30 Heavy 101853943 L90540a
Bonded Perforated Roll
150 ft 15 Heavy 101854007 L90535b,* Length Width
Item No. Mfr. No. Color Usage (in) (in)
a
1 roll per box.
b
2 rolls per box. 110867277 GPIL1818 Gray Universal 18 18
110867538 WPIL1818 White Speckled Oil-Only 18 18
Oil-Only Boom
Recycled Tuff Rug™ Roll
For emergency spills on water, this is the product. It absorbs petroleum-based
fluids and contains spills for easier handling. Booms have links at both ends,
which hook together for any size spill. Features:
• Highly absorbent recycled-fiber mat has walk-on
Features: Applications: durability
• Superior fluid retention • Motor oil • Recycled polypropylene and acrylic fibers absorb up
• Dustless • Benzene to 84.6 gallons per roll
• Hydrophobic – repels water • Acrolein • High tensile strength stands up to jobs with steady
• Butyric acid foot traffic
• Isoprene • Dark, multicolored mat looks cleaner longer as fluids
are absorbed
• Rolls are ideal for covering large areas
Material: Melt-Blown Polypropylene
Pkg. Qty.: 4 Material: Polypropylene/Acrylic Fibers
Height Length Width Length Width Absorption
Item No. Mfr. No. (in) (ft) (in) Material Wt. (ft) (in) (gal) Item No. Mfr. No.
101608693 L90857 5 10 5 Heavy 150 36 84.6 110867346 RRUG36H
78 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
*
Oil-Only Contractor Grade Pads & Rolls
Features:
• Economical and perfect for short-term use for oil spills
• Versatile enough to use for any outdoor spill
• Highly absorbent Melt-Blown polypropylene mat repels water and soaks up only oil and oil-based fluids
• Perfect for light-duty industrial, maintenance and general applications
• HighLoft construction is sturdy and soft
• Quickly absorbs leaks, spills and overspray to keep floors dry
• Pads are great for general cleanup applications; rolls are great for covering large surface areas, with
perforations that allow you to tear rolls into different sizes
Color: White
Contractor Grade Pad Contractor Grade Roll Material: Polypropylene
Material Length Width Absorption Pkg. Material Length Width Absorption Pkg.
Wt. (in) (in) (gal) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Single 18 15 35 200 112886555 WP-S* Medium 150 30 40 1 113124163 WR-M
Medium 18 15 20 100 112723140 WP-M* Heavy 150 30 44 1 113231940 WR-H
Heavy 18 15 22 100 112886503 WP-H*
*
Universal Commander™ Pads & Rolls
Features:
• Versatile, highly absorbent mat pad makes quick work of chemical leaks and spills
• Made with FineFiber technology for increased surface area, fast absorption and a firmer grip underfoot
• Three-ply construction withstands moderate foot traffic and rugged work conditions
• Pads are perforated at the center (7.5”); rolls perforated every 7.5” vertically and cross-perforated
every 17” horizontally so you can use only what you need
• Our most popular pads are suitable for use around machinery, under assembly lines and conveyers
and in areas with moderate foot traffic
Material Length Width Absorption Pkg. Material Length Width Absorption Pkg.
Wt. (in) (in) (gal) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Medium 19 15 20.8 100 110867271 GPF100M* Medium 150 30 39.5 1 110867291 GRF150M
Heavy 19 15 26.3 100 110867269 GPF100H* Heavy 150 30 49.8 1 110867290 GRF150H
*
Universal Contractor Grade Pads & Rolls
Part of making smart spill decisions is not buying more absorbent than you need. Not every job requires
long-term durability or heavy-duty strength. Sometimes you need an absorbent that will let you get in, do
the job, and get out.
Features:
• Versatile, cost-effective absorbent mat pad designed for light duty spill cleanup
• Universally absorbent design handles water, most oils and many solvents and coolants
• Dimpled surface adds fast wicking power; quickly captures and soaks up liquid spills
• Pads perforated up the center at 7.5”; rolls perforated every 7.5” vertically and cross-perforated every 17”
horizontally for easy custom sizing
Color: Gray
Contractor Grade Pad Contractor Grade Roll Material: Polypropylene
Material Length Width Absorption Pkg. Material Length Width Absorption Pkg.
Wt. (in) (in) (gal) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Single 18 15 35 200 113231929 GP-S* Medium 150 30 40 1 113016349 GR-M
Medium 18 15 20 100 112727507 GP-M* Heavy 150 30 44 1 113231941 GR-H
Heavy 18 15 22 100 113231928 GP-H*
*
Oil-Only Commander™ Pads & Rolls
Features:
• Oil-only absorbent mat pad designed to absorb oils, gasoline, diesel and greases; selectively absorbs
petroleum-based liquids while repelling water
• Made with FineFiber technology for increased surface area, fast absorption and a firmer grip underfoot
• Three-ply construction withstands moderate foot traffic and rugged work conditions
• Pads are perforated at the center (7.5”); rolls perforated every 7.5” vertically and cross-perforated every
17” horizontally so you can use only what you need
Color: White
Commander™ Pad Commander™ Roll Material: Polypropylene
Material Length Width Absorption Pkg. Material Length Width Absorption Pkg.
Wt. (in) (in) (gal) Qty. Item No. Mfr. No. Wt. (ft) (in) (gal) Qty. Item No. Mfr. No.
Medium 19 15 20.8 100 110867532 WPF100M* Medium 150 30 39.5 1 110867559 WRF150M
Heavy 19 15 26.3 100 110867530 WPF100H* Heavy 150 30 49.8 1 110867558 WRF150H
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 79
Safety Products
QuickSorb® Granular Absorbent
Features:
Oil-Only Contractor Grade Sock/Net Boom • QuickSorb® absorbent has been specially processed for greater
absorption power
• Smaller granules offer more surface area coverage and allow
Features: granules to absorb up to twice as much liquid per pound
• Oil-only sock/net boom ideal for containing outdoor
oil spills Material: Clay Granules
• Poly blend filler repels water while absorbing oil
and other hydrocarbons Item No. Mfr. No. Package Type
• Exceptional absorbency 101865844 I05000-G60 20 lb Pail
• Convenient connectors link multiple booms
together for effective containment of larger spills WARNING: Product contains respirable crystallize silica which is
• Suitable for short-term containment applications know to the state of California to cause cancer. For more information,
go to www.P65Warnings.ca.gov.
Material: Poly Blend
Absorption: 30 gal
Pkg. Qty.: 4
Premium Absorbent
Height Length Width Features:
Item No. Mfr. No. (in) (ft) (in) • Formulated to maximize absorption and minimize dust
110867500 WB510SN 5 10 5 • Used to absorb oils, mixtures of soluble oils, acids, paints, inks,
water and other liquids
• Proper use of these products can reduce slipping accidents and
hazards, prevent flash oil fires and keep floors clean and dry
• Do not use with turpentine, vegetable oil, unsaturated organic
compounds or hydrofluoric acid
Capacity
Item No. Mfr. No. (qt)
Oil-Only Poly Blend Sock 114776092 I06032G60 32
WARNING: Product contains respirable crystallize silica which is
know to the state of California to cause cancer. For more information,
go to www.P65Warnings.ca.gov.
Features: Universal
• Oil-only absorbent socks designed for short-term containment of oil and other CornCob Sock
hydrocarbons
• Filled with a poly blend that selectively absorbs oil and other petroleum-based liquids
while repelling water
• Flexible design conforms to machine bases and fits snugly to prevent seepage
• Sorbent sock can float to absorb
waterborne hydrocarbons; white
color makes it easy to see Material: Polypropylene Sleeve/Poly Blend Filler Features:
saturation levels at a glance Absorption: 25 gal/pkg • Contain spills and ckeep fluids from spreading with CornCob Socks
Color: White • With a tough polypropylene skin and finely ground corn cob filler, these socks absorb
Diameter: 3 in 1/2 gallon of oil, coolants, solvents and water – nearly twice as much as clay, but
without the dust or the mess to clean up afterward
Length • Incinerable
Item No. Mfr. No. (ft) Pkg. Qty. • Easy and convenient to put
110867578 WSO430 4 30 into place
110867579 WSO815 8 15 • Ideal for surrounding spilled Material: Polypropylene Sleeve/CornCob Filler
110867576 WSO1210 12 10 fluids or wrapping around Absorption: 20 gal/pkg
leaky machines Color: Gray
Length Width
Item No. Mfr. No. (in) (in) Pkg. Qty.
110867207 CCSO40 42 3 40
80 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Spill Kits
Features: Features:
• Packed with quality SpillTech® products to help you clean up fast and comply with • Packed with quality SpillTech® products to help you clean up fast and comply
regulations with regulations
• Includes a variety of sorbents to handle spills when timing is critical; choose • Includes a variety of sorbents to handle spills when timing is critical; choose
Universal to battle oils, coolants, solvents or water; pick Oil-Only to absorb oil-based Universal to battle oils, coolants, solvents or water; pick Oil-Only to absorb
liquids while repelling water oil-based liquids while repelling water
• Self-contained kit stores sorbent products for easy access as needed for spill control; • Self-contained kit stores sorbent products for easy access as needed for
ready when you are spill control; ready when you are
• Prepacked in an X-rated DOT-approved OverPack • Packaged in a compact bag that stores tidily behind the seat of a truck for
• Twist-on, double wall lid with closed cell gasket provides sealed and secure closure easy access
to protect sorbents from moisture, dirt and damage
• Rust- and corrosion-free 100% polyethylene is durable to withstand rough handling
Includes: Includes:
• (25) heavyweight Defender™ pads • (4) yellow disposal bags and ties • (25) heavyweight Defender™ pads • (2) yellow disposal bags and ties
15” x 19” 18” x 30” 15” x 19” 18” x 30”
• (4) sorbent socks 3” x 4’ • (6) tamperproof labels 6” x 2” • (3) sorbent socks 3” x 4’ • (1) vinyl spill kit label 3” x 5”
• (2) sorbent pillows 18” x 18” • (1) vinyl spill kit label 3” x 5” • (1 pair) nitrile gloves one size • (1) clear vinyl zippered bag
• (1 pair) nitrile gloves one size • (1) yellow 20 gallon OverPack salvage • (1 pair) safety goggles one size 7” x 15” x 18”
• (1 pair) safety goggles one size drum with screw top lid 23” x 19”
Features:
• Seamless construction eliminates leaks
• High density polyethylene (HDPE) construction with lead-free UV protectant provides excellent chemical resistance and impact
durability for long life
• Removable HDPE flat top grates for simplified cleaning
• Black models and grates made with 100% recycled HDPE
• Forklift pockets on most models for easy relocation
• Use optional Sump-to-Sump™ drain kit to join platforms together and gain full compliance with regulations for sump capacity
• Includes one pair rubber grommets and one polytetrafluoroethylene (PTFE) transfer tube (Patent No US 6,622,879,B1)
• Load and unload heavy drums with ease using optional ramp with anti-skid diamond pattern – use with most platform sizes
• Supports EPA Spill Prevention, Control and Countermeasures Rule (SPCC)
• Mfr. No. 1635B complies with OSHA and ESP regulations and supports SPCC
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 81
Safety Products
Features:
• Low profile, 28” overall height allows safe and convenient IBC tank handling and dispensing
• All polyethylene construction offers excellent chemical resistance and will not rust or corrode
• Forkliftable – allows convenient positioning to desired locations
• Low cost design with value added features and benefits
• Large 52” x 52” deck allows safe and convenient placement of IBC tanks
• Small footprint – 62” x 62” unit requires minimal floor space
• 365 gallon sump capacity meets SPCC and EPA container storage and spill containment regulations
• Optional pull over cover keeps rain water out of sump and helps comply with Stormwater Management Regulations
• Four inner polyethylene columns support uniformly distributed loads of up to 8,500 lb
• All components are easily removed for cleaning
• Optional bucket shelf captures spills from dispensing; spills that exceed 3 gallons are channeled into the 365 gallon
sump through a bulkhead fitting
Color: Yellow
Material: Polyethylene
Sump Capacity: 365 gal
Rigid-Lock QuickBerm®
Features:
• Safe, drive-in spill containment for drums, IBC totes and tanks
• Single-piece construction – patented Rigid-Lock wall support system integral to berm provides
unobstructed work space
• Quick and easy setup – no assembly required
• Durable modified PVC coated fabric withstands long term
UV exposure – great for outdoor use
Material: Modified PVC Coated Fabric
Applied® carries the right tool for the right job. Check out our
tool selection in Chapter 1, or visit Applied.com for a more
comprehensive offering.
82 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
Are
Are You
You Prepared foran
Prepared for anAccidental
Accidental
Spill
Spill in
in Your Facility?
Facility?
Leave
Leaveyour
yourspill
spillresponse
responsesolutions
solutionstotous.
us.
Get
Getthe
theabsorbents
absorbents you need
needorganized
organizedininour
our exclusive
exclusive Spill
Spill Control
Control Station™.
Station™. ThisThis innovative
innovative solution
solution
puts absorbents close to where potential spills can happen, greatly speeding response
puts absorbents close to where potential spills can happen, greatly speeding response time. time.
Mat Rolls
Rolls fit on cabinet’s drop-in bar for easy dispensing
when longer mat lengths are needed.
Mat Pads
Pads control spills and overspray to help keep floors
dry and safe. Large surface area quickly soaks up
liquids on contact.
Absorbent Socks
Ideal for surrounding spilled fluids or wrapping around
leaky machines. Easy and convenient to put into place.
Flexible to conform around machine bases and offer a
snug fit with no seepage.
Absorbent Pillows
High-volume absorbency lets you keep pillows in
place longer underneath constant drips and steady
leaks. Easy to place in hard-to-reach areas.
Wiper Rolls
Fit on cabinet’s drop-in bar; great for cleaning work
surfaces, tools and hands.
Every Small
EverySmall
Every PartCounts
Small Part
Part Counts
Counts
We’re
We’re here
We’rehere to
hereto manage
to manage them for
themfor
manage them you!
foryou!
you!
®
® ®
Contact Us
Contact Us Today
Today
Contact Us Today
www.AppliedMSS.com • 800-458-4018
www.AppliedMSS.com •• 800-458-4018
www.AppliedMSS.com 800-458-4018
www.AppliedMSS.com • 800-458-4018
Distribution Centers:
Distribution Centers:
Distribution Centers:
Strongsville,
Strongsville, OH
OH Fontana, CA
CA
Strongsville, OHOH Fontana,
Fontana,
CA
Lithia
Lithia Springs,
Springs, GA
GA Agawam, MA
Lithia Springs, GAGA Agawam,
Agawam,MA MA
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 83
Safety Products
SMART
SPILL SOLUTIONS.
If you work in a facility, you work with liquids. And if you work with liquids ...well, you're going to
have issues. Are you ready to respond to leaks, drips and spills?
From sorbents to spill kits to secondary containment, you'll find the right solution to your particular
problem at SpillTech. And more than just products, you'll find Smart Spill Solutions.
Look for us in the Safety Products section
of this catalog or at www.spilltech.com
84 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
ustsubaki.com
PBUS SERIES
This clutch series is used in
general overrunning or indexing
applications and has provision
for mounting gears, pulleys, and
sprockets to the outer race.
BB Series
This clutch series is a
MGUS SERIES combination of a 62 Series
ball bearing and a cam
This clutch series is suitable for clutch, designed for press fit
applications that require low to applications.
high speed inner or outer race
overrunning.
Over the last 50 years, Tsubaki engineers have spent thousands of man hours
designing and improving uni-directional/mechanical clutches in an effort to
improve reliability and performance. Innovative designs and features
incorporated in our cam clutch products assure efficient and dependable
operations in the harsh environments.
®
TTsL1BA1<1
Want us to optimize your operations?
That's what we do.
©2021 U.S. Tsubaki Power Transmission, LLC All Rights Reserved. LEADING THE MOVEMENT
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 85
Safety Products
Benefits:
» Sort – Organize, sort and
ETY SO separate what parts are
AF fe Worukgh R needed & not needed in the
work area
S
T
Sa hro Org
in t T an
ta men out ize
n ay » Set In Order – Bin, label
vir n
En ai
L
o
M
Pa
SUSTAIN
a b e li n g
identifying parts
&L
xL
ns
el
ev
s
IN
Cle a n
li n e s s
frequent basis and revisit
E
ET
S to confirm usage
SHIN E » Safety – Maintain a safe
work environment and
continue to improve safety
in the workplace
» Sustain – Consistent service
that continues to improve
every day
®
Every Small Part Counts We’re here to manage them for you!
Contact
Contact Us
Us Today
Today
www.AppliedMSS.com • 800-458-4018
www.AppliedMSS.com • 800-458-4018
Distribution
Distribution Centers:
Centers:
Strongsville,
Strongsville, OH
OH Fontana,
Fontana, CA
CA
Lithia
Lithia Springs, GA Agawam, MA
Springs, GA Agawam, MA
86 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Safety Products
POWER TOOLS
COMPRESSORS
INGERSOLL RAND® Offers thousands of
products for every stage of your operation.
AIR
For over 100 years, Ingersoll Rand® has inspired
progress by driving innovation with class-leading
AIR MOTORS
industrial technologies and creating new standards
for how the world gets work done.
HOISTS
MANAGEMENT
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 87
Safety Products
Count on the Applied® MaintenancePRO® Training program for practical, hands-on courses on maintenance, troubleshooting,
component application and failure analysis. Public courses are held throughout the U.S., or you may schedule a course at your job
site. Courses may be customized for your unique training needs.
88 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Lubrication Products & Equipment
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
Pneumatic 9
Products
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
Equipment
Service Center
Directory
Lubrication Products & Equipment
Optimum
performance
is within reach.
For maximum food safety, the TOTAL NEVASTANE range of food grade lubricants is committed to guaranteeing safety of your
food production while optimizing your productivity and maintenance costs. Our high performance lubricants and expert advice
will help you meet the performance demands of your processing equipment while ensuring reliability and durability.
totalspecialties.com
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
21/22
Belt Dressings......................................................................114 Fitting Tools......................................................................147,152
Breathers, Desiccant...................................................163-165 Fluid Meters & Valves...............................................137,143,159
Contact Cleaners.................................................................109 Fluid Storage....................................................................153-156
Greases Grease Fittings.................................................................142-152
Aluminum Complex............................................. 91,93-95,97-98 Grease Identification Products.........................................154-156
Bearing.............................................................. 91,93-94,96-100 Grease, Suction Guns & Accessories...................129,138-144,154
Dielectric.................................................................................123 Liquid Level Gauges.........................................................159-161
Extreme Pressure................................. 91-92,94,96-100,103,125 Oil Cups...........................................................................156-157
Food Grade............................................................93-95,101,105 Oil Filtration..............................................................156,163-164
High & Low Temperature..................................94,96-98,100,107 Oil Hole Covers................................................................161-162
Marine.................................................................................97-99 Oil Transfer.......................................................................153-154
Multi-Purpose............................................. 91-93,95-99,105,125 Oilers & Accessories..........................................130, 157-159,163
Open Gear....................................................................91,97-100 Pump Repair Kits....................................................................137
Synthetic.............................................................92,94-96,98,125 Pumps & Accessories................... 130-138,144,146-147,154,156
Water-Resistant........................................... 91,93-94,96-100,105 Sampling Ports........................................................................138
Lubricants Tubing & Accessories................................................143-147,151
Air Tool....................................................................................109 Lubrication Interchanges.................................. 102, 106, 108
Anti-Friction Coatings.................................109,113,116,119-122 Oils
Chain........................................... 105,112-113,116,118-121,125 Air Compressor...........................................................95,104,108
Chemical-Resistant..........................................................120-121 Air Tool....................................................................................109
Compounds......................................................................100-101 Chain......................................................................................112
Corrosion Inhibitors.......................................... 114-121,124-125 Cooling Fluids.........................................................................110
Dry...................................................................................120-121 Cutting.............................................................................110-111
Food Grade..........................................103,105-106,112,114,123 Desiccant Breathers/Oil Dryers.........................................163-164
High Performance............................................................116,121 Food Grade............................................................92,95,104-105
Multi-Purpose......................................................93,115-120,125 Gear..........................................................................101-104,107
Open Gear.......................................................................113,125 Hydraulic..........................................................................106-107
Silicone...................................................... 105-106,117,121-124 Machine.............................................................103-104,107,109
Synthetic...................................................................103,112-114 Penetrating.................................... 99,112,114-115,117-119,123
Lubrication Equipment Stamping.........................................................................110-111
Automatic Grease Lubricators..........................................126-130 Synthetic............................................................................93,108
Breathers & Breather Vents..............................................162-164 Paste, Anti-Seize....................................................100-101,105
Expansion Chambers..............................................................158
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Product Description Mfr. No. Item No. Product Description Mfr. No. Item No.
Ceran XM 100 Calcium Sulfonate Complex Grease Vestan HT/AW
183717 117991548 NSF H1 Aluminum Complex Grease NLGI 2 195016 115658236
(Cartridges) (ISO VG 100 Base Oil Vis.) Clear 2 (Pails)
Ceran XM 100 Calcium Sulfonate Complex Grease Vestan HT/AW
167268 117991549 NSF H1 Aluminum Complex Grease NLGI 2 195015 110378918
(Pails) (ISO VG 100 Base Oil Vis.) Clear 2 (Kegs)
Ceran XM 100 Calcium Sulfonate Complex Grease Nevastane 2+ NSF H1 Multi-purpose White Food Machinery
183620 117991550 184880 102432455
(Kegs) (ISO VG 100 Base Oil Vis.) (Pails) Grease NLGI 2
Ceran XM 220 Calcium Sulfonate Complex Grease Nevastane HD2T
PRODUCT
(Cartridges) (ISO VG 460 Base Oil Vis.) (Pails) non-ferrous metals
Ceran XM 460
(Pails)
Ceran XM 460
PRODUCT Calcium Sulfonate Complex Grease
(ISO VG 460 Base Oil Vis.)
Calcium Sulfonate Complex Grease
182159
182241
DESCRIPTION
117991813
117991814
Spirit 3000 (Pail)
CODE
206442
117991831
118001710
(Kegs) (ISO VG 460 Base Oil Vis.)
Spirit 6000 (Pail) Heavy-duty semi synthetic (micro emulsion 206426 118001712
Ceran XS 80 Synthetic Calcium Sulfonate Complex Grease
188583 117991815 Valona 4984 S
(Cartridges) (ISO VG 80 Base Oil Vis.) Heavy-duty chlorinated cutting oil 184143 102134570
Multis Complex Grease (Pails)
Ceran XS 80 Synthetic Calcium Sulfonate Complex Grease
(Pails) Ceran Grease
(ISO VG 80 Base Oil Vis.)
188582 117991816 Valona 2463 S
Chlorinated cutting oil for ferrous metals 184206 111373398
(Pails)
Ceran
CeranXM 100 (Cartridges)
XS 80 Synthetic Calcium Sulfonate Complex Grease Calcium Sulfonate Complex Grease (ISO VG 100 Base Oil Vis.) 183717
188581 117991817 Valona 1046 (Pails) Heavy-duty heat cutting oil for ferrous metals 184568 118001674
Ceran(Kegs)
XM 100 (Pails) (ISO VG 80 Base Oil Vis.) Calcium Sulfonate Complex Grease
Nevastane XS (ISO
80 VG
NSF100 Base Oil
H1 Synthetic Vis.)Sulfonate Complex
Calcium
167268
Ceran XS 320 Synthetic Calcium Sulfonate Complex Grease 190497 114130055
Ceran XM 100 (Kegs) (ISO VG 320 Base Oil Vis.)
(Cartridges) Calcium
188591 Sulfonate
117991818Complex Grease
(Cases) (ISO VG 100 Base
Grease (ISOOil
VGVis.)
80 Base Oil Vis.) 183620
Nevastane XS 320 NSF H1 Synthetic Calcium Sulfonate Complex
Ceran XS 320 Synthetic Calcium Sulfonate Complex Grease 190493 106507965
188590 117991819 (Cases) Grease (ISO VG 320 Base Oil Vis.)
(Pails) (ISO VG 320 Base Oil Vis.)
Ceran XM 220 (Cartridges) Calcium Sulfonate Complex Grease
Nevastane AW(ISO
32 VG 220 Base
NSF H1 FoodOil Vis.)
Grade AW Hydraulic Oil
179304
Ceran XS 320 Synthetic Calcium Sulfonate Complex Grease 200767 102130814
Ceran(Kegs)
XM 220 (Pails) (ISO VG 320 Base Oil Vis.) Calcium
188519 Sulfonate
117991820Complex Grease
(Pails) (ISO VG 220 Base OilISO Vis.)
VG 32 177040
Ceran
SynolanXM
1000220
ISO (Kegs)
Synthetic PAO Circulationg Oil
Calcium
185345
Sulfonate
118001605
Nevastane AW 46
Complex Grease
(Pails)
NSF H1 Food Grade AW Hydraulic Oil
(ISO VG 220 Base Oil Vis.)
ISO VG 46
179302
200771 101860413
VG 32 (Pails)
Nevastane AW 68 NSF H1 Food Grade AW Hydraulic Oil
Synolan 1000 ISO 200775 101858413
Ceran
VG 46XM 460
(Pails) (Cartridges)
Synthetic PAO Circulationg Oil Calcium
171223 Sulfonate
110776516Complex Grease
(Pails) (ISO VG 460 Base Oil ISO Vis.)
VG 68 182240
Nevastane EP 100 182159
Ceran
SynolanXM
1000460ISO (Pails)
Synthetic PAO Circulationg Oil
Calcium
185350
Sulfonate
118001608
ComplexGear
Grease (ISO VG 460NSF
Oil (Pails)
Base Oil Vis.)
H1 Gear Oil ISO VG 100 200204 101858730
VG 68 (Pails)
Ceran XM 460 (Kegs) Calcium Sulfonate Complex Grease
Nevastane (ISO VG 460 Base Oil Vis.)
EP 150 182241
Synolan 1000 ISO NSF H1 Gear Oil ISO VG 150 200208 102159908
Synthetic PAO Circulationg Oil 183800 118001603 Gear Oil (Pails)
VG 100 (Pails)
Nevastane EP 220 188583
Ceran
SynolanXS
100080ISO(Cartridges)
Synthetic PAO Circulationg Oil Synthetic
185342 Calcium
118001633Sulfonate Complex
Gear Oil (Pails) Grease
(ISO
NSFVG 80 Base
H1 Gear Oil ISO Oil Vis.)
VG 220 200211 118001841
VG 150 (Pails)
Ceran XS 80 (Pails) Synthetic Calcium Sulfonate Complex
Nevastane EP 320 Grease (ISO VG 80 Base Oil Vis.) 188582
Synolan 1000 ISO NSF H1 Gear Oil ISO VG 320 200214 101859017
Ceran
VG 220XS 80 (Kegs) Synthetic PAO Circulationg Oil
(Pails)
185344 Calcium
Synthetic Gear
118001635Sulfonate Oil (Pails) Grease (ISO VG 80 Base Oil Vis.)
Complex 188581
Nevastane EP 460
Synolan 1000 ISO NSF H1 Gear Oil ISO VG 460 200217 102076190
Synthetic PAO Circulationg Oil 185346 118001637 Gear Oil (Pails)
VG 320 (Pails)
Ceran XS 320 (Cartridges) Synthetic Calcium Sulfonate Complex
Nevastane EP 680Grease (ISO VG 320 Base Oil Vis.) 188591
Synolan 1000 ISO NSF H1 Gear Oil ISO VG 680 200220 102219545
Ceran
VG 460XS 320 (Pails) Synthetic PAO Circulationg Oil
(Pails)
185348 Calcium
Synthetic Gear
118001639Sulfonate Oil (Pails) Grease (ISO VG 320 Base Oil Vis.)
Complex 188590
Nevastane SH 32
Ceran
SynolanXS
1000320
ISO (Kegs)
Synthetic PAO Circulationg Oil Synthetic
185351 Calcium
118001641Sulfonate Complex
(Pails) GreaseNSF H1 Synthetic PAO Compressors,
(ISO VG 320
Pneumatic andBase OilOilVis.)
Hydraulic
188519
198365 115046182
VG 680 (Pails)
Nevastane SH 46 NSF H1 Synthetic PAO Compressors,
Carter SH 150 198368 113425586
(Pails) Pneumatic and Hydraulic Oil
PAO Synthetic
(Pails)Syntheic
PAO EP Gear Oil
Circulating Oil 185730 117991828
Multi-Purpose Grease
Specifications
Min. Max.
Grease Type NLGI Viscosity cSt Temperature Temperature Drop Point
Model No. Thickener Grade @ 40 °C (°F) (°F) (°F) Applications
1200-2 Lithium 2 183 -10 300 400 General-purpose industrial and automotive grease
1241 Lithium Polymer 1 237 5 290 400 Centralized systems, construction, mining and industrial equipment
1242 Lithium Polymer 2 237 15w 300 425 Heavy-duty construction equipment, front end loaders, etc.
1444 Alum. Complex 2 626 20 400 500 Heavy-duty construction, mining equipment, adverse conditions
1552 Lithium Complex 2 200 0 400 500 Industrial, construction or mining equipment, adverse conditions
3000 Moly-Lithium 2 237 15 300 450 Heavy-duty, moly type grease construction equipment
3000 Moly-Lithium 2 60 -30 275 375 Heavy-duty equipment, chassis, cold weather conditions
630-2 Lithium 2 135 5 275 380 Multi-purpose, general greasing, bearings
630-A Lithium 2 135 5 275 390 Cup type lube, water pumps
630-AA Lithium 1 135 5 270 380 Automatic dispensers, centralized systems, large lines
630-AAA Lithium 0 151 10 265 360 Centralized greasing systems
730-2 Alum. Complex 2 151 -10 400 560 Industrial/construction equipment, adverse conditions
EMB Lithium 2 100 -40 400 390 Electric motor bearings, fans & other high speed grease type ball/roller bearings
X-357 Lithium 1 18 -60 300 360 Aerosol – moly
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 91
Lubrication Products & Equipment
Premium All-Purpose Industrial Grease SYNOLAN Oil
Lithium-complex, thickened grease designed for a variety of light- to medium-duty
industrial applications that operate at higher-than-average temperatures and loads.
SYNOLAN 1000 Oils are multi-purpose, ashless synthetic (PAO) gear and bearing
oils that excel in a wide range of applications, including rotary screw air compressors
Features: (especially viscosity grades ISO 32 & 46) and other equipment operating in severe
• Solid protection against rust and corrosion service conditions, such as process gas, natural gas and gas gathering applications.
• Excellent protection against wear
• 55 lb Timken “OK” load Synthetic PAO Circulating Oil
• Carries the NLGI GC-LB rating for the most
stringent operating conditions ISO
Viscosity
Product Grade Item No. Mfr. No. Container
Applications: 32 118001605 185345 Pail
• On- and off-road • Ball joints
46 110776516 171223 Pail
applications • U-joints Color: Amber
• Wheel bearings • Power takeoffs 68 118001608 185350 Pail
Flash Point: 437 °F 100 118001603 183800 Pail
• Axles • Bushings Dropping Point: 500 °F SYNOLAN 1000 150 118001633 185342 Pail
NLGI No. 2 Temperature Range: -40 °F to 300 °F
220 118001635 185344 Pail
320 118001637 185346 Pail
Item No. Mfr. No. Size Container
460 118001639 185348 Pail
101193401 GR217C-2 14 oz Cartridge
680 118001641 185351 Pail
101193405 GR217T-2 1 lb Tub
101193404 GR217P-2 35 lb Pail
Also available in 16 gallon and 55 gallon plastic-lined drums. Please call your local Applied®
service center.
Size
Item No. Mfr. No. (oz) Container Grease Type: Calcium Sulfonate Complex
101193423 GR232C-2 14 Cartridge
ISO
Viscosity
Product Grade Item No. Mfr. No. Container
Lubrication Selection Guide 117991548 183717 Cartridge
Timken Grease Selection
CERAN XM 100 100 117991549 167268 Pail
Timken Grease Selection
Flowchart – Environment Flowchart – Application 117991550 183620 Keg
114128905 179304 Cartridge
Agriculture/Mining CERAN XM 220 220 112408824 177040 Pail
Extreme Heat Construction/Off Road 117991551 179302 Keg
Heavy Loads Timken Cement Plants 117991552 182240 Cartridge
High Sliding Wear Construction and Earth Moving Equipment CERAN XM 460 460 117991813 182159 Pail
Dirty Environments Off-Highway Fleet Equipment 117991814 182241 Keg
Slow Speeds Grease Heavy Industry
Shock Loading Rock Quarry
Pivot Pins/Splined Shafts
92 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
* † ‡ #
Specifications
Viscosity Min. Max. Drop
Grease Type NLGI cSt Temperature Temperature Point
Model No. Thickener Grade @ 40 °C (°F) (°F) (°F) Applications
3H Direct Inorganic 2 75 40 120 >500 Plain and anti-friction bearings in the food processing industry
CLEARPLEX-1 Aluminum Complex 1 100 0 360 465 Plain and anti-friction bearings in the food processing industry
CLEARPLEX-2 Aluminum Complex 2 150 10 400 450 Plain and anti-friction bearings in the food processing industry
Meat processing plants, canneries, dairies, breweries, carton & packaging
Calcium Sulfonate
CS-FG EP-2 2 105 10 400 600 equipment, food processing & handling equipment, bottling plants, many others
Complex
where incidental food contact is a possibility
FGL-0 Aluminum Complex 0 120 -0 335 435 Centralized lubrication systems on high speed can closing equipment
Centralized lubrication systems that require a NLGI 00 grade of grease, older
FGL-00 Aluminum Complex 00 120 0 300 410
or leaky gear cases that can no longer contain oil
FGL-1 Aluminum Complex 1 120 0 360 460 Low and high speeds, low and high temperatures and wide range of loads
Large bearings, open gears, chains and other exposed surfaces, severe operating
FGL-2 Aluminum Complex 2 160 10 400 515
conditions such as water, steam, high temperature and load
FGL-CC Aluminum Complex 0/00 120 -10 350 450 Centralized & automatic lubrication systems on high speed can-closing equipment
FML-1 Anyhdrous Calcium 1 144 10 200 285 Various food processing applications where a class H-1 lubricant is required
FML-2 Anyhdrous Calcium 2 144 10 200 285 Various food processing applications where a class H-1 lubricant is required
Pure Tac Aluminum Complex 2 1187 20 400 520 All types of medium to slow speed bearings and open gears
Freezer and other cold temperature applications where conventional food
SFL-1 Aluminum Complex 1 39 -60 350 450
grade greases cannot be used
SFL-2 Aluminum Complex 2 219 -40 400 500 Use throughout most modern food processing plants
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 93
Lubrication Products & Equipment
Food Safe Grease Food Grade White Grease
Features: FRIENDLY
• Improved low and high temperature performance A high purity, high quality aluminum complex grease that provides
• Contains extra pressure, antiwear additives and corrosion and superior lubrication and durability in many food and pharmaceutical
oxidation inhibitors processing applications. Designed for heavy load applications requiring
• Food processing operations a long grease life. Protects equipment against rust, oxidation and wear.
Features:
• With exclusive Perma-Lock® actuator
• Excellent adhesion resists throw-off and shear breakdown
Color: White • Food and pharmaceutical processing
Flash Point: 437 °F • This product is labeled extremely flammable
Temperature Range: -40 °F to 300 °F • NSF H1 registered for incidental food contact
NLGI No. 2 • Resistant to water and detergent wash out
Size • Read and observe the special warning on the label, do not apply while
Item No. Mfr. No. (oz) Container equipment is energized
101193419 GR231C-2 14 Cartridge NLGI No. 2 Temperature Range: 0 °F to 450 °F
Features: Applications:
• Compliance with all existing • Bakery equipment
legislation on food protection • Food processing equipment *
• High resistance to water washout • Multi-pack cassette bearings
• Excellent grease life • Wrapping machines
• Excellent corrosion resistance • Conveyor bearings FRIENDLY
†
• An essentially neutral pH value • Bottling machines
Color: Transparent Synxtreme FG-2 Synthetic Grease
NLGI No. 2 Temperature Range: -5 °F to 230 °F
100% synthetic, calcium sulfonate-based, food grade grease.
Size
Item No. Mfr. No. (oz) Container
101169807 LGFP 2/0.4 14 Cartridge
94 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
* †
VESTAN HT/AW CLEAR Greases are high performance food grade lubricants that provide excellent bearing lubrication in all kinds of bearings throughout
the modern food processing plant. The addition of special anti-wear additives gives VESTAN HT/AW CLEAR as much as 50% higher wear resistance over
traditional food grade greases. Their use assures long machine life while reducing contamination problems as required by the Hazard Analysis and Critical
Control Point System (HACCP).
*
NEVASTANE Lubricants
FRIENDLY
NEVASTANE AW oils have been successfully used in high pressure hydraulic systems, low and high speed bearings, airline lubricators (ISO grades 22 and 32), as a rust
protection spray after washdown, in hand oiled bearings, slides, guides and chains, and on conveyors.
NEVASTANE XSH oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
NEVASTANE XSH 150 to 460 oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low
temperatures. NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.
NEVASTANE EP’s formulation is based on white mineral oils, synthetic oils and hihg performance additives provides excellent extreme pressure, anti-wear and anti-oxidant
properties. NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries. NEVASTANE EP
oils are also suitable for the lubrication of numerous applications in the food industry such as can seamers, chains and conveyor belts.
NEVASTANE XS Oils meet the most stringent industrial requirements: Continuation of the equipment life while reducing contamination problems as required by the Hazard
Analysis and Critical Control Point System (HACCP). Excellent mechanical and thermal stability (high dropping point). Remarkable load resistance thanks to its naturally high
extreme pressure and anti-wear properties. Outstanding water and steam resistance and excellent food acids / alkalis resistance. No significant loss of consistency is observed
even with high amounts of water entering the grease. Excellent anti-oxidation and anti-corrosion properties, also in the presence of saltwater.
NEVASTANE Food Grade H1 Hydraulic Oil
Product Item No. Mfr. No. Container Description
NEVASTANE AW 32 102130814 200767 Pail NSF H1 Food Grade AW Hydraulic Oil ISO VG 32
NEVASTANE AW 46 101860413 200771* Pail NSF H1 Food Grade AW Hydraulic Oil ISO VG 46
NEVASTANE AW 68 101858413 200775* Pail NSF H1 Food Grade AW Hydraulic Oil ISO VG 68
H1 EP Gear Oil
Product Item No. Mfr. No. Container Description
NEVASTANE EP 100 101858730 200204* Pail NSF H1 Gear Oil ISO VG 100
NEVASTANE EP 150 102159908 200208* Pail NSF H1 Gear Oil ISO VG 150
NEVASTANE EP 220 118001841 200211 Pail NSF H1 Gear Oil ISO VG 220
NEVASTANE EP 320 101859017 200214* Pail NSF H1 Gear Oil ISO VG 320
NEVASTANE EP 460 102076190 200217* Pail NSF H1 Gear Oil ISO VG 460
NEVASTANE EP 680 102219545 200220 Pail NSF H1 Gear Oil ISO VG 680
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 95
Lubrication Products & Equipment
*
Ball Bearing Pillow Block Grease
Synthetic Food Grade Grease FRIENDLY
Outstanding long life, moderately high temperature lubrication for ball bearings.
Features:
Features: Applications: • Specifically designed for lubrication of moderate- to high-speed ball
• Twice as much load-carrying capacity as • Compatible with most bearings in pillow block applications
the leading food-grade grease (based on rubbers and plastics • Maintains shear stability and resists corrosion – even in the presence of
Timken “OK” load tests) • Gaskets and o-rings salt water
• Nearly 50% more PTFE than other leading • Valves • Low noise characteristics
food-grade PTFE lubricants • Bushings • Excellent pumping ability
• Pure synthetic for added durability and • Sterilizer chains • Does not contain extreme pressure additives but is inhibited against rust
long-lasting performance • Pool equipment and oxidation
• Waterproof • Water filters Applications:
• Nonstaining • Universal joints • Kiln and glasswork applications Color: Dark Blue
• Does not contain any greenhouse gas • Electric motors Flash Point: 491 °F
propellants • Chemical manufacturing Temperature Range: -40 °F to 325 °F
• NSF registered, H1 rated • Noise-sensitive environments Thickener Type: Polyurea
NLGI No. 2 ASTM Drop Point: 500 °F
NLGI No. 2 Temperature Range: -10 °F to 400 °F
Size
Size Item No. Mfr. No. (oz) Container
Item No. Mfr. No. (oz) Container 101193415 GR220C-2 14 Cartridge
101759029 TF23004 3 Tube We also offer Timken grease in 16 gallon kegs and 55 gallon plastic-lined drums. For
113420993 TF220201*,† 11.25 Spray Can more information, please contact your local Applied® service center.
113420995 TF220211 14 Cartridge
†
WARNING: This product contains a chemical known to the State of California to cause
birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
ThermaPlex® Multi-Purpose Bearing Grease
96 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Hi-Temp remains stable and resists carbonization at high temperatures, reducing Heavy-duty, NLGI No. 2, aluminum complex-based grease that provides superior
risk of bearing failure. lubrication and withstands high temperature and high pressure.
Features: Features:
Applications: • Red color provides easy visual inspection
• Reduces the risk of bearing failure
• Aluminum castings • Penetrates deep to form a tenacious, long-lasting film
at high temperatures
• Boiler room equipment • Waterproof and resistant to acids, alkalis, salt, oxidation,
• Resists carbonization at high
• Cement kiln fans weather and steam
temperatures
• Conveyors • Extends operating service life of equipment and reduces wear,
• Very high dropping point
• Crucibles galling and scoring
• Extends relubrication intervals
• Engine room equipment • This product is labeled extremely flammable
• Reduces grease consumption
• Processing ovens • Read and observe the special usage warning on the label
• Very good vibration resistance
• Shrink wrappers • Do not apply while equipment is energized
• Reduces need for multiple greases
Applications:
• Break-in lubrication for bearings • Industrial bearings
Color: Brown • Cables • Latches
Temperature Range: -15 °F to 392 °F • Cams and pistons • Open gears
Dropping Point: 536 °F • Electrical motor shafts • Overhead door tracks
NLGI No. 2 4-Ball Weld Load: > 400 kg • Fifth wheels • Pillow blocks
• Guide rails • Pulleys
Size
• Heavy equipment • U-joints
Item No. Mfr. No. (oz) Container
• Hinges
101740505 70214 14.1 Cartridge Color: Red
NLGI No. 2 Working Temperature: -25 °F to 300 °F
Size
ThermaPlex® CS Moly Bearing Grease Item No. Mfr. No. (oz) Container
100729411 LGEP2/0.4 14 Cartridge
Size Size
Item No. Mfr. No. (oz) Container Item No. Mfr. No. (oz) Container
101658019 70814 14.1 Cartridge 102045321 SL3330 14 Cartridge
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 97
Lubrication Products & Equipment
Construction & Off-Highway Grease
Lithium Brick Grease
Features: Applications:
• Contains 5% moly disulfide • Mining
• Provides resistance to • Draglines
extreme pressures caused • Construction equipment
by shock loading • Bulldozers Features:
• Protects against rust • Tractors • Easily cut into small pieces
and corrosion • Combines • Recommended for open slot and well type
• Offers excellent high bearings where the brick grease rides directly
temperature properties on the bearing shaft
Color: Gray • Commonly used in rock quarries and paper mills
• 65 lb Timken “OK” load Flash Point: 491 °F
Temperature Range: -40 °F to 400 °F
NLGI No. 2 ASTM Dropping Point: 572 °F Color: Amber
Dropping Point: 325 °F
Size
Item No. Mfr. No. (oz) Container
Size
101193410 GR219C-2 14 Cartridge Item No. Mfr. No. (lb) Pkg. Qty.
Also available in 16-gallon and 55-gallon plastic-lined drums. Please call your local Applied® 101997418 L0132-038 4 12 Bricks per case
service center.
98 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
White Lithium Grease White Lithium Grease with PTFE
FRIENDLY
High purity, high quality NLGI no. 2 white lithium-based aerosol grease that White Lithium Grease with PTFE is an ultra white, lithium-based, aerosol grease
provides superior lubrication and durability in any weather or temperature. with PTFE additives for superior lubrication.
Excellent as a break-in lubricant for bearings and for general-purpose lubrication
and corrosion protection of machinery, tools and equipment. Features:
Features: • Pure white grease
• Excellent heat and water resistance • PTFE additives
• Rust and oxidation inhibitors for superior metal protection • Maximum lubrication
• Smooth, buttery consistency provides optimum surface coverage • Resists rust and oxidation
• Protects with a tough, high viscosity film • Heat and water resistant
• White color allows for easy visual inspection of film coverage • Will not melt or wash away
• This product is labeled extremely flammable • Does not contain any chlorinated solvents
• Read and observe the special usage warning on the label
• Do not apply while equipment is energized Applications:
• NSF H2 registered for use in meat and poultry plants • Bearings • Gears
• Bushings • Hinges
Applications: • Cable connections • Nuts and bolts
• Hinges • Guide rails • Chains • Pulleys
• Latches • Cams and pistons • Conveyors • Rollers
• Overhead door tracks • Break-in lubrication for bearings • Cranes • Saws
• Open gears • General-purpose lubrication • Drives • Screws
• Cables and corrosion protection for • Fasteners • Shafts
• Slide conveyors machinery, tools and equipment • Fixtures • Wire ropes
• Forklifts
Size Net Wt. NLGI No. 2
Item No. Mfr. No. (oz) (oz) Container
Size Net Wt.
101843263 03080 16 10 Aerosol Item No. Mfr. No. (oz) (oz) Container
WARNING: Cancer - www.P65Warnings.ca.gov. 102053867 03816 16 10 Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 99
Lubrication Products & Equipment
Sta-Plex™ Extreme Pressure Copper Based Anti-Seize Lubricant
Premium Red Grease
Exclusive formula suspends copper and graphite in a high-quality grease.
Features:
• Extremely versatile lithium complex, NLGI No. 2 grease with excellent high Features:
temperature lubrication • Protects metal from rust and corrosion
• Protects against rust and oxidation • Resists seizing and galling
• Typical drop point: 500 °F • Temperatures to 1,800 °F (982 °C)
• CARB: Complies with VOC regulations as detailed by the
Applications:
California Air Resource Board
• Recommended for use on a wide variety of transportation, industrial,
• OTC: Complies with VOC regulations as detailed by the
agricultural and construction parts and equipment, especially those
Ozone Transport Commission
exposed to severe operational conditions
• Mil-PRF907-F
• Industrial mining, metal production, machining, plastic molding pumps,
• CFIA approved
motors, ball and roller bearings and assembly plants
• Equipment associated with petroleum chemicals, steel mills,
Color: Red paper plants, marine and foundries
NLGI No. 2 Dropping Point: 500 °F
Applications:
Size • Electrically conductive
Item No. Mfr. No. (oz) Container • Aluminum
102045322 SL3190 14 Cartridge • Soft metals Color: Copper
Size
Item No. Mfr. No. (lb) Container
100867443 160796 1 Brush Top Can
*
Copper Anti-Seize &
* Lubricating Compound
Open Gear Grease General-purpose, anti-seize lubricant that prevents seizing and galling caused by
high temperatures, heavy loads, vibration and corrosion. This unique formula has a
smooth texture, fine particle sizing and familiar copper color, making it an excellent
choice for closely-fitted parts needing extreme lubrication.
For all open gear types. Extra heavy for adverse conditions where gears are
exposed to abrasives common in quarries and mines. Low temperature for Features:
cold weather. • Copper-based, safe for use on both ferrous and
non-ferrous metals
Features: • High temperature resistivity protects parts
• Thick, adhesive, tacky up to 2,000 °F
• Water resistant • Electrically conductive – does not insulate and
• Antiwear interrupt current flow
• Resists rust and oxidation • Does not compromise integrity of soft metals
• Will not harden; heat aging won’t affect lubricity
Applications: of product
• Open gears
• Fifth wheels Applications:
• Cold weather and adverse conditions • Fittings • Studs
• Bushings • Threaded surfaces
• Flanges • Pipes
Series Gear Shield Extra Heavy, NLGI No.3 • Headers • Plugs and manifolds to
• Nuts prevent seizing and galling
Size • Screws of surfaces
Item No. Mfr. No. (oz) Container
102075579 L0152-000 10.5 Cartridge Size
102069794 L0152-063* 11 Aerosol Item No. Mfr. No. (oz) Container
102223080 SL35901 8 Bottle with Brush Top
101851089 14095a,* 16 Aerosol
a
This product is labeled extremely flammable.
Nickel Anti-Seize
SYNXTREME ASAP Anti-Seize For preventing corrosion, seizing and galling in harsh chemical environments
Assembly Paste especially on stainless steel.
Features:
Features: • High temperature resistance up to 2,400 °F
• Protects parts from seizing and rusting together • Copper-free
• Greatly reduces maintenance headaches caused by parts • CARB: Complies with VOC regulations as detailed by the
rusting together California Air Resource Board
• Aids in assembly and disassembly of parts • OTC: Complies with VOC regulations as detailed by the
• Highly resistant to saltwater corrosion Ozone Transport Commission
• Compatible with all types of metals/most plastics • Recommended for stainless steel and other metal fittings
• Approved by the American Bureau of Shipping
Color: White
Color: Silver
Item No. Mfr. No. Container Size Container
117459391 L0404-008 8 oz Brush-Top Can Size
116633312 L0404-016 16 oz Tub Item No. Mfr. No. (lb) Container
117584273 L0404-035 40 lb Pail 100867510 135543 1 Brush Top Can
100 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Silver Grade Anti-Seize All-Purpose Anti-Seize
Features:
• Heavy-duty All-Purpose Anti-Seize is a moly-fortified lubricant engineered to provide protection
• High temperature resistance up to 1,600 °F in extreme environments and operating temperatures.
• Petroleum-based
• Fortified with graphite and metallic flake Features:
• Protects fine threads, snug slip fits or other closely • Temperature resistant up to 1,800 °F (982 °C)
mated parts • Moly-fortified
• Permits easy disassembly • Lead-free
• Will not evaporate or harden in extreme cold or heat • Protects against seizure, heat-freeze, galling, rust
• CARB: Complies with VOC regulations as detailed by the and corrosion
California Air Resource Board • Flows evenly
• OTC: Complies with VOC regulations as detailed by the • Lowers friction and reduces wrench torque
Ozone Transport Commission • Will not harden, evaporate or settle out and requires
• Canada Food Inspection Agency approved no thinning
• Approved by the American Bureau of Shipping • Not affected by contraction, expansion or vibration
• Mil-PRF907-F • Mil Spec MIL-PRF-907E
Applications: Applications:
• For use in assemblies up to • Foundries • Flanges • Fittings
1,600 °F (871 °C) • Gaskets • Chains • Flat belts
• High temperature and • Headers • Studs • Round belts
heavy contact pressure • Manifolds • Turbines • V-belts
applications • Nuts • Manifolds • Toothed belts
• Bolts • Petrochemical • Screws • Drive belts
• Bushings • Pipes • Engines • Polishing belts
• Fittings • Power plants • Pipes • Sanding belts
• Flanges • Steel mills • Hinges • Nuts and bolts
Color: Silver • Tubular threads
Size Size
Item No. Mfr. No. (lb) Container Item No. Mfr. No. (lb) Container
100867506 235005 1 Brush Top Can 102102039 04110 1 Can
Protects parts from seizures, galling, rust, corrosion and heat freeze.
Features:
• Prevents galling, corrosion and seizing Features:
• Will not evaporate or harden in extreme temperatures • Nonstaining, odorless and tasteless
• Salt and moisture resistant • High temperature resistance up to 1,800 °F
• Easy assembly/disassembly • Conductive
• Metal parts exposed to high temperatures and moisture • Food processing machinery
• MIL Spec A-907 • NSF H1 registered for incidental food contact
Size Size
Item No. Mfr. No. (oz) Container Item No. Mfr. No. (oz) Container
102224244 80078 8 Brush Top Bottle 101943269 SL35905 8 Brush Top Bottle
These heavy-duty, zinc-free, extreme pressure, 100% CARTER SH Oils are premium quality industrial gear lubricants designed to provide
synthetic-based, fluid lubricants are designed for excellent extreme pressure (EP) and load carrying properties. They are oxidation stable
applications where an extreme pressure synthetic fluid and exhibit anti-rust/anti-corrosion, demulsibility and anti-foam characteristics. They
is required. They deliver outstanding extreme pressure meet the viscosity requirements of ISO 68 to 1000.
protection, excellent anti-wear properties and very low
coefficients of friction, resulting in lower operating
temperatures, reduced power consumption and longer
equipment life. Excellent thermal stability and oxidation
resistance increases service life, providing extended drain
intervals. Compatible with a broad range of seals. Syn
Lube HD 220 and 460 pass 12 stages of the FZG Test.
Synthetic PAO EP Gear Oil
ISO Flash 5 gal Pail 55 gal Drum ISO
Viscosity Point Viscosity Viscosity
Grade (°F) Index Item No. Mfr. No. Item No. Mfr. No. Product Grade Item No. Mfr. No. Container
ISO-150 540 154 102155417 L1000-060 102133911 L1000-062* Carter SH 150 150 117991828 185730 Pail
ISO-220 540 154 102157467 L1001-060 102154970 L1001-062* Carter SH 220 220 117991829 184847 Pail
ISO-320 540 157 102155616 L1002-060 102155615 L1002-062* Carter SH 320 320 115520370 185736 Pail
ISO-460 550 164 102155205 L1003-060 102131609 L1003-062* Carter SH 460 460 113760762 185739 Pail
ISO-680 555 170 102133391 L1004-060 102156165 L1004-062* Carter SH 680 680 118001631 185733 Pail
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 101
Lubrication Products & Equipment
*
Gear Oil
Interchange/Crossover Recommendations
Exxon/Mobil ISO Grade Lubriplate Kluber ISO Grade Lubriplate
SHC 524 32 Syn Lube 32 KluberOil 4UH1-100 100 SFGO Ultra 100
SHC 525 46 Syn Lube 46 KluberOil 4UH1-150 150 SFGO Ultra 150
SHC 526 68 Syn Lube 68 KluberOil 4UH1-220 220 SFGO Ultra 220
SHC 624 32 Syn Lube 32 KluberOil 4UH1-320 320 SFGO Ultra 320
SHC 626 68 Syn Lube 68 KluberOil 4UH1-460 460 SFGO Ultra 460
SHC 627 100 Syn Lube 100 KluberOil 4UH1-680 680 SFGO Ultra 680
SHC 629 150 Syn Lube 150 KluberSynth UH-1 6-150 150 PGO FGL-150
SHC 630 220 Syn Lube 220 KluberSynth UH-1 6-220 220 PGO FGL-220
SHC 632 320 Syn Lube 320 KluberSynth UH-1 6-320 320 PGO FGL-320
SHC 634 460 Syn Lube 460 KluberSynth UH-1 6-460 460 PGO FGL-460
SHC 636 680 Syn Lube 680 KluberSynth UH-1 6-680 680 PGO FGL-680
SHC 639 1000 Syn Lube 1000 KluberSynth GH 6-150 150 PGO-150
SHC CIBUS 32 32 SFGO ULTRA 32 KluberSynth GH 6-220 220 PGO-220
SHC CIBUS 46 46 SFGO ULTRA 46 KluberSynth GH 6-320 320 PGO-320
SHC CIBUS 68 68 SFGO ULTRA 68 KluberSynth GH 6-460 460 PGO-460
SHC CIBUS 150 150 SFGO ULTRA 150 KluberSynth GH 6-680 680 PGO-680
SHC CIBUS 220 220 SFGO ULTRA 220
SHC CIBUS 320 320 SFGO ULTRA 320
SHC CIBUS 460 460 SFGO ULTRA 460
MOBILGEAR SHC 150 150 Syn Lube HD 150
MOBILGEAR SHC 220 220 Syn Lube HD 220
MOBILGEAR SHC 320 320 Syn Lube HD 320
MOBILGEAR SHC 460 460 Syn Lube HD 460
MOBILGEAR SHC 680 680 Syn Lube HD 680
These heavy-duty, extreme pressure oils were developed to meet gear oil needs of most automotive, truck, heavy equipment and industrial gearboxes requiring an extreme
pressure type oil. Meets military specification MIL-PRF-2105E and MIL-L-2105D and API categories GL-3, GL-4, GL-5, MT-1.
APG Series APG Series Gear Oil
SAE Gear Viscosity cSt Pour Pt AGMA
Model No. Oil No. @ 40 °C ISO Grade (ºF) Series No. Item No. Mfr. No. Size Container
APG-80 80W 67 68 -35 APG-80 2EP 102071632 L0117-007 1 gal Jug
APG80W-90 80W-90 124 150 -35 102060062 L0030-013 2 lb Jug
APG-90 90 156 220 -20 APG80W-90 3EP 102060053 L0030-007 1 gal Jug
APG80W-140 80W-140 248 320 -25 102060054 L0030-035 5 gal Pail
APG-140 85W-140 410 460 0 102071636 L0118-013 2 lb Jug
APG-250 250 701 680 5 102059956 L0118-007 1 gal Jug
APG-90 5EP 102059510 L0118-035 35 lb Pail
102073238 L0118-039* 120 lb Keg
102072857 L0118-040* 55 gal Drum
102105084 L0119-007 1 gal Jug
APG-140 7EP
102071634 L0119-035 35 lb Pail
102073240 L0124-013 2 lb Jug
APG80W-140 6EP 102059670 L0124-007 1 gal Jug
102068786 L0124-035 5 gal Pail
APG-250 8EP 102072858 L0120-013 2 lb Jug
102 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Continued from previous page. *
Gear Oil
SPO series of petroleum-based oils is specifically designed for industrial applications. These tacky lubricants will provide antiwear lubrication for high sliding action in worm
gears. They are also excellent for bevel, helical and spur gears. SPO Lubes can be used with silver alloy, copper and copper alloy bearings. Excellent for use in high moisture
and high temperature applications. Provides performance comparable to synthetic lubricants.
SPO Series SPO Series Gear Oil
SAE Gear Viscosity cSt Pour Pt AGMA
Model No. Oil No. @ 40 °C ISO Grade (ºF) Series No. Item No. Mfr. No. Size Container
SPO-222 80W 63 68 -30 101385575 L0242-013 2 lb Jug
SPO-233 80W 91 100 -35 SPO-222 2 101807091 L0242-007 1 gal Jug
SPO-244 80W-90 135 150 -25 102069803 L0242-035 35 lb Pail
SPO-255 90 200 220 -10 102070598 L0243-007 1 gal Jug
SPO-233 3
SPO-266 90 280 320 10 102071563 L0243-035 5 gal Pail
SPO-277 140W 432 460 15 102071565 L0244-013 2 lb Jug
SPO-288 250 628 680 10 102072879 L0244-007 1 gal Jug
SPO-244 4
SPO-299 250 950 1000 10 102069723 L0244-035 5 gal Pail
102071562 L0244-040* 55 gal Drum
102070023 L0245-013 2 lb Jug
102068707 L0245-007 1 gal Jug
SPO-255 5
102071002 L0245-035 5 gal Pail
102070945 L0245-040* 55 gal Drum
102071200 L0246-007 1 gal Jug
SPO-266 6
102070599 L0246-035 5 gal Pail
102069663 L0247-013 2 lb Jug
SPO-277 7 102071000 L0247-007 1 gal Jug
102075591 L0247-035 5 gal Pail
102071559 L0248-013 2 lb Jug
SPO-288 8 102069660 L0248-007 1 gal Jug
102071001 L0248-035 5 gal Pail
SPO-299 8A 102143283 L0249-035 35 lb Pail
These extreme pressure lubricants are designed for use in helical, bevel helical, planetary and worm type gearboxes operating in the most demanding food manufacturing
environments. Formulated with a high performance food grade additive package, these lubricants deliver outstanding protection against micropitting and wear as well as good
corrosion protection and thermal stability.
PGO-FGL Series PGO-FGL Series Gear Oil
SAE Gear Viscosity cSt Pour Pt AGMA Size
Model No. Oil No. @ 40 °C ISO Grade (ºF) Series No. Item No. Mfr. No. (gal) Container
PGO-FGL 460 140 477 460 -33 101548165 L0813-057 1 Jug
PGO-FGL 460 7
101545628 L0813-060 5 Pail
The high performance, USP mineral oil-based, NSF H1, food grade seamer oils are specifically designed to lubricate can seaming machines with once-through oil systems as
well as those that utilize oil recirculating/filtration systems. Recommended for Angelus Seamer models 61H, 120L, 121L, 140S and 180S.
The high quality, fully synthetic lubricants are designed for use in Angelus and Zacmi seaming/canning equipment and related applications. Formulated with premium additives,
these high performance lubricants provide excellent anti-wear, anti-rust and anti-corrosion protection under extreme conditions encountered in the food processing industry,
such as water, steam and caustic solutions washdowns.
Mineral Seamer Oil FG 100 & 150
Flash Pour ISO 55 gal Drum 330 gal Disposable Bin
SAE Viscosity Point Point Viscosity
No. Index (°F) (°F) Grade Item No. Mfr. No. Item No. Mfr. No.
30 102 495 0 100 101408782 L0908-062 101377318 L0908-070
40 99 450 0 150 101393161 L0909-062 101396064 L0909-070
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 103
Lubrication Products & Equipment
* †
I
Food Machinery Oil FRIENDLY
Specifications
Viscosity Flash Pour
ISO cSt Point Point
Model No. Grade @ 40 °C (°F) (°F) Applications
78 Cooker 150 164 475 -20 Manzel Lubricators for A-B Cookers and Sterilizers, FMC Cookers
FMO-85-AW 22 21 345 -30 Air tools, Airline Oilers
FMO-200-AW 46 65 455 490 Hydraulic Systems
FMO-350-AW 68 65 480 -10 Multi-purpose, Hydraulic Systems
FMO-500-AW 100 95 500 5 Multi-purpose
FMO-900-AW 150 164 475 5 Multi-purpose
FMO-1100-AW 220 207 455 10 Multi-purpose, Gearboxes
FMO-1700-AW 320 301 440 10 Multi-purpose, Gearboxes
FMO-2400-AW 460 429 445 15 Multi-purpose, Gearboxes
FMO-3800-AW 680 700 425 20 Multi-purpose, Gearboxes
FP-150 460 367 395 0 Helical Gearboxes, Chains, Linkages, Cams and Slides
FP-150L 100 103 410 -5 Helical Gearboxes, Chains, Linkages, Cams and Slides
Pure Flush 7 11 210 -35 Clean and Flush Bearings, Gear Cases, Hydraulic Systems, Centralized Lubricating Systems, Air Lines, Chains and Air Tools
SFGO Ultra-7 7 7 305 -65 Extreme Cold Temperature, Chain Lubrication
SFGO Ultra-32 32 30 475 -58 Severe conditions, extremely low/high temperatures, air compressors, hydraulic systems, bearings, gearboxes, pumps & chains
SFGO Ultra-46 46 50 480 -45 Severe conditions, extremely low/high temperatures, air compressors, hydraulic systems, bearings, gearboxes, pumps & chains
SFGO Ultra-68 68 67 495 -45 Severe conditions, extremely low/high temperatures, air compressors, hydraulic systems, bearings, gearboxes, pumps & chains
SFGO Ultra-100 100 98 485 -43 Severe conditions, extremely low/high temperatures, air compressors, hydraulic systems, bearings, gearboxes, pumps & chains
SFGO Ultra-150 150 146 495 -43 Severe conditions, extremely low/high temperatures, air compressors, bearings, gearboxes, pumps & chains
SFGO Ultra-220 220 222 520 -42 Severe conditions, extremely low/high temperatures, bearings, gearboxes
SFGO Ultra-320 320 318 520 -40 Severe conditions, extremely low/high temperatures, bearings, gearboxes
SFGO Ultra-460 460 452 480 -40 Severe conditions, extremely low/high temperatures, bearings, gearboxes
SFGO Ultra-680 680 623 500 -45 Severe conditions, extremely low/high temperatures, bearings, gearboxes
STO-FG 68 67 425 -15 Bottle filling machines, food grade
ISO ISO
Viscosity Viscosity
Series Grade Item No. Mfr. No. Size Container Series Grade Item No. Mfr. No. Size Container
78 Cooker ISO-150 102068703 L0700-062* 55 gal Drum 101366934 L0888-057 1 gal Jug
FMO-3800-AW ISO-680
102069807 L0880-067 14 oz Bottle 102071667 L0888-061* 120 lb Keg
102072880 L0880-057 1 gal Jug 116136758 L0735-063† 11 oz Aerosol w/ Trigger
ISO-7
FMO-85-AW 102075593 L0880-060 5 gal Pail 102068783 L0735-057 1 gal Jug
FP-150 ISO-460
102105101 L0880-062* 55 gal Drum 102059504 L0735-060 5 gal Pail
ISO-22 102070952 L0880-054A 1 qt Bottle 102069696 L0735-062* 55 gal Drum
102073249 L0881-057 1 gal Jug 102060059 L0736-057 1 gal Jug
FP-150L ISO-100
FMO-200-AW ISO-46 102069818 L0881-060 5 gal Pail 102071601 L0736-060 5 gal Pail
102073895 L0881-062* 55 gal Drum 102069810 L0816-054 1 qt Bottle
Pure Flush ISO-7
102071880 L0882-063† 12 oz Aerosol 102073898 L0816-060 5 gal Pail
102069798 L0741-057 1 gal Jug 102070819 L0912-063† 11 oz Spray
FMO-350-AW, 102071657 L0882-057 1 gal Jug SFGO Ultra-7 ISO-7 101588232 L0912-060 5 gal Pail
AGMA 1, USP ISO-68
Mineral Oil 102070588 L0741-060 5 gal Pail 102073260 L0912-062* 55 gal Drum
102069664 L0882-060 5 gal Pail SFGO Ultra-32 ISO-32 102069725 L0915-060 5 gal Pail
102117522 L0882-062* 55 gal Drum 102071577 L0916-057 1 gal Jug
102071658 L0883-057 1 gal Jug SFGO Ultra-46 ISO-46 102071661 L0916-060 5 gal Pail
FMO-500-AW ISO-100 102070602 L0883-060 5 gal Pail 102073253 L0916-062* 55 gal Drum
102073256 L0883-062* 55 gal Drum 101352292 L0917-057 1 gal Jug
102071202 L0884-057 1 gal Jug SFGO Ultra-68 ISO-68 102075596 L0917-060 5 gal Pail
FMO-900-AW ISO-150 102075592 L0884-060 5 gal Pail 102117519 L0917-062* 55 gal Drum
102070944 L0884-062* 55 gal Drum 102075611 L0983-057 1 gal Jug
102071879 L0886-057 1 gal Jug 102071575 L0983-060 5 gal Pail
SFGO Ultra-100 ISO-100
102071006 L0886-060 5 gal Pail 102070390 L0983-061* 120 lb Keg
FMO-1100-AW ISO-220
102073900 L0886-061* 120 lb Keg 102069740 L0983-062* 55 gal Drum
102070026 L0886-062* 55 gal Drum SFGO Ultra-150 ISO-150 102071891 L0984-060 5 gal Pail
102058825 L0887-057 1 gal Jug 102088836 L0985-057 1 gal Jug
FMO-1700-AW ISO-320
102163685 L0887-060 5 gal Pail SFGO Ultra-220 ISO-220 102069741 L0985-060 5 gal Pail
102070377 L0885-057 1 gal Jug 102070035 L0985-062* 55 gal Drum
FMO-2400-AW ISO-460 102071201 L0885-060 5 gal Pail SFGO Ultra-320 ISO-320 102072985 L0986-060 5 gal Pail
102088844 L0885-062* 55 gal Drum 102075612 L0987-057 1 gal Jug
SFGO Ultra-460 ISO-460
102072986 L0987-060 5 gal Pail
SFGO Ultra-680 ISO-680 102075609 L0988-060 5 gal Pail
102105099 L0863-060 5 gal Pail
STO-FG ISO-68
102073250 L0863-062* 55 gal Drum
104 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Sprayon’s H1 Food Grade Program was specially developed to meet the needs of today’s food processing industry. Equally important to the NSF H1 rating,
Sprayon’s food grade offering was designed with performance in mind. With heavier load pressures and superior resistance to water washout, low flammability
ratings and wider temperature ranges, their offering features products specifically designed to preserve and protect your valuable equipment to prevent costly
breakdowns and ensure maximum performance.
Operational Flash
Temperature Range Film Point Size Net Wt.
Item No. Mfr. No. Description (°F) Base Type (°F) (oz) (oz)
103232487 S00209000 LU209 Food Grade Penetrating Oil -45 to 280 Synthetic Wet <0 20 15.25
103233309 S00701000 LU701 Food Grade Machinery Oil -40 to 450 White Mineral Oil Wet >200 20 12.75
112934617 SC0700000 LU700 Food Grade Machinery Oil -40 to 450 White Mineral Oil Wet >200 16 10.00
101934302 S00104000 LU104 Food Grade Penetrating Oil -40 to 475 Synthetic Wet >200 20 11.75
103234046 S00101000a LU101 Food Grade White Lithium Grease -20 to 285 Anhydrous Calcium Based White Grease Grease Like <0 20 13.75
103232930 S00207000b LU207 Food Grade Synthetic Grease -10 to 325 Synthetic Grease Like <0 20 14.25
103261888 S00205000 LU205 Food Grade Chain Lubricant 12 to 450 Vegetable Wet <0 20 15.00
112934612 SC0210000 LU210 Food Grade Silicone Lube -40 to 450 Silicone Wet <0 16 10.00
103232931 S00211000 LU211 Food Grade Dry Silicone -40 to 450 Silicone Dry <0 20 13.25
103233310 S00212000 LU212 Food Grade Silicone Lubricant -40 to 450 Silicone Wet <0 20 13.25
103233055 S00213000 LU213 Food Grade High Temp Lubricant 12 to 635 Vegetable Wet <0 20 15.00
101913231 S00214000 LU214 Food Grade Low Temperature Lubricant -78 to 478 Synthetic Wet <0 20 15.00
103232488 S00621000 LU621 Food Grade Anti-Seize 5 to 1,800 Synthetic Grease Like <0 20 15.00
a
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
b
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Food Grade Machine Oil Food Grade Machine Oil is a food grade lubricant and penetrant that minimizes friction,
Food grade machine oil penetrates and loosens rust, scale, dirt and corrosion to free extends equipment life and penetrates to provide complete surface coverage protection
parts and fasteners. against wear and corrosion.
Features:
Features: • Penetrates to loosen frozen nuts and bolts
• With exclusive Perma-Lock® actuator • Provides excellent lubrication
• Contains no silicone • Does not contain silicone
• Odorless • Colorless, odorless and nontoxic
• Colorless • Eliminates sticking, binding and squeaking
• Zero VOC formula • Nonstaining
• CARB: Complies with VOC regulations as detailed by the • Safe on most plastics
California Air Resource Board • Inverta spray valve lets you spray in an upright and inverted position
• OTC: Complies with VOC regulations as detailed by the • DETEX™ metal and x-ray detectable plastic components
Ozone Transport Commission • NSF® registered H1 #129000 for use in meat and poultry plants
• LADCO: Complies with VOC regulations as detailed by the • All ingredients are GRAS per 21 CFR 178.3570
Lake Michigan Air Directors Consortium
• Complies with RoHS restrictions on the use of certain hazardous
Size Net Wt.
substances in electrical and electronic equipment Item No. Mfr. No. (oz) (oz) Container
• Meets FDA regulation 21 CFR 178.3570
• NSF H1 registered for incidental food contact 101866183 01316 16 11 Aerosol
• Safe on most plastics
Applications:
• All food processing equipment directly exposed to food products
• Scales Synthetic Food Grade Oil FRIENDLY
• Fans
• Carts
Features:
• Galleys
• Synthetic lubricating fluid with PTFE
• Bottle fillers
• Corrosion resistant
• Chutes
• Chemical resistant
• Conveyors
• Nonstaining
• Racks
• Waterproof
• Ovens
• Resistant to forming emulsions
• Stoves
• Extends equipment life
• Mixers
• Reduces friction and wear
• Freezers
• Biodegradable
• Rails
• Does not contain any greenhouse gas propellants
• Cooking appliances Color: Clear
• Kosher approved
Size Net Wt. Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container Item No. Mfr. No. (oz) (oz) Container
101844173 03081 16 11 Aerosol 113421029 TF230101 16 12 Spray, Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 105
Lubrication Products & Equipment
†
*
Food Grade Silicone Hydraulic and Lubricating Oil
FRIENDLY
Silicone spray for food processing and handling applications forms a colorless,
odorless, nonstaining film that lubricates and protects.
Features: Features:
• With exclusive Perma-Lock® actuator • Antiwear fortified
• Colorless and odorless • Resists rust and corrosion
• Safe on most plastics • Antioxidation
• Nonstaining film • High aniline points
• Excellent release agent • Withstands elevated temperatures and
• Eliminates binding and sticking high pressures
• Protects most metal-to-nonmetal applications • Meets the requirements and is approved by
• This product is labeled extremely flammable Abex-Denison HF-0 and HF-2
• Read and observe the special usage warning on the label
• Do not apply while equipment is energized Specifications
• Meets FDA regulation 21 CFR 178.3570 Viscosity cSt Flash Pt Pour Pt
• NSF H1 registered for incidental food contact Model No. SAE No. ISO Grade @ 40 °C (°F) (°F)
Applications: HO-0 10 32 160 415 -30
• Chutes • Locks and hinges HO-1 20 46 213 420 -25
• Cooking appliances • Pulleys HO-2 20 68 309 430 -20
• Conveyors • Motor bearings HO-2A 30 100 518 445 -15
• Bottle fillers • Projectors
• Ovens • Rubber seals ISO
• Freezers • Tools Viscosity Size
• Slicers • Ceramic insulators Color: Clear/Water-White Series Grade Item No. Mfr. No. (gal) Container
• Knives and saws • Parking meters Temperature Range: -40 °F to 400 °F 102060077 L0760-057 1 Jug
• Linkages Flash Point: <0 °F HO-0 Hydraulic Oil ISO-32 102071646 L0760-060 5 Pail
102070933 L0760-062* 55 Drum
102071195 L0761-057 1 Jug
Item No. Mfr. No. Size Net Wt. Container
HO-1 Hydraulic Oil ISO-46 102071196 L0761-060 5 Pail
101843061 03040 16 oz 10 oz Aerosol 102070590 L0761-062* 55 Drum
101750903 03039*,a 16 oz 15 oz Spray, Trigger 102072870 L0762-057 1 Jug
101844167 03041*,a 5 gal 5 gal Pail HO-2 Hydraulic Oil ISO-68 102073245 L0762-060 5 Pail
101843262 03042*,a,† 55 gal 55 gal Drum 102071647 L0762-062* 55 Drum
* WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. 102069651 L0763-057 1 Jug
HO-2A Lubricating Oil ISO-100
a
For use in manufacturing establishments only. 102070591 L0763-060 5 Pail
Features:
• Odorless, colorless, nonstaining • High concentration of silicone - 20%
• Lubricates and protects most metal-to-nonmetal applications • For food processing and handling applications
• Dry film eliminates binding and sticking • USDA H2
• Double treatment of silicone • FDA 21 CFR 178.3570 Color: Clear
• Certified OU Kosher Pareve • NSF H1 registered Flash Point: 600 °F
• HALAL registered Temperature Range: -40 °F to 400 °F
Net Wt.
Item No. Mfr. No. (oz) Container
101889207 L0723-063 10 Spray, Aerosol
*
AW Series Hydraulic Oil
Fiske Hydraulic Oil Crossover
Lubrication Royal
Fiske Chevron Citgo Conoco Dubois Exxon Engineers Mobil Pennzoil Purple Schaeffers Shell Texaco
Fiske Hydraulic Hydraulic MPO Terrestic Monolec DTE 24 or Pennzbell Synfilm Tellus Rando
AW-32 112 HTC 32
AW-32 Oil 32 Oil 32 10 32 6401 DTE Light AW 32 32 Plus 32 HD 32
Rando HD 46
Fiske Hydraulic Hydraulic MPO Terrestic Monolec DTE 25 or Pennzbell Synfilm Tellus
AW-46 112 HTC 46 or Rando HD
AW-46 Oil 46 Oil 46 15 46 6402 DTE Medium AW 46 46 Plus 46
Z 36
DTE 26 or
Fiske Hydraulic Hydraulic MPO Terrestic Monolec Pennzbell Synfilm Tellus
AW-68 DTE Heavy 112 HTC 68 Rando HD 68
AW-68 Oil 68 Oil 68 20 68 6403 AW 68 68 Plus 68
Medium
106 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
Bio-Synxtreme HF Series
Special Low Pour Hydraulic Oil Hydraulic Fluid
Antiwear oil containing fluid zinc to reduce ring and vane wear. These high performance hydraulic fluids are designed
for demanding industrial and marine (VGP) applications
requiring environmental sensitivity, fire resistance and
Features: excellent anti-wear properties over wide temperature
• Petroleum-based oil ranges. They are Polyalkylene Glycol (PAG) based fluids that
• High pressure are anhydrous (water-free). They do not break down to form
• Rust oxidation inhibited sludge and they do not hydrolyze in the presence of water.
• High aniline points to increase seal life They do not cause a sheen or discoloration on the surface
• Reduces foam and heat of the water or adjoining shorelines. Rated “Practically
• Low temperatures, -70 °F pour point Non-Toxic” to fish and other aquatic wildlife according to
• Heavy-duty the US Fish and Wildlife Service hazard classification. They
• For hydraulic systems and bearing oil applications meet US EPA Vessel General Permit (VGP) requirements.
Not compatible with hydrocarbon-based hydraulic fluids. As
with any fluid conversion, recognized industry procedures
Color: Clear to Yellow including system cleanup and flushing should be followed.
SAE No.: 5W-20 (Lubriplate Hydroflush recommended.)
Viscosity Index: 210
ISO Viscosity Grade: ISO-22
Flash Point: 519.8 °F to 593.6 °F
Size Viscosity Index: 194
Item No. Mfr. No. (gal) Container
Size
102070995 L0767-057 1 Jug Item No. Mfr. No. (gal) Container
102069718 L0767-060 5 Pail
112449506 L1020-060 5 Pail
113046114 L1020-062* 55 Drum
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 107
Lubrication Products & Equipment
*
Flash Pour
SAE ISO Viscosity Viscosity Point Point Size
Series No. Grade cSt @ 40 °C Index (°F) (°F) Item No. Mfr. No. (gal) Container
AC-1 20 46 42 120 420 -25 102070584 L0705-057 1 Jug
102072866 L0707-057 1 Jug
AC-2A 30 100 94 104 445 -15
102069648 L0707-060 5 Pail
102070927 L0706-057 1 Jug
AC-2 20 68 74 106 430 -20
102069943 L0706-060 5 Pail
SYNAC 46 20 46 44 118 455 -35 102073902 L0933-060 5 Pail
SYNLUBE32 10W 32 32 136 470 -70 102073908 L0970-060 5 Pail
101769616 L0971-060 5 Pail
SYNLUBE46 20W 46 44 138 485 -65
102071574 L0971-062* 55 Drum
SYNLUBE68 20 68 66 138 505 -60 102070385 L0972-060 5 Pail
101604987 L0964-062a,* 55 Drum
Syncool 10 32 41 156 485 -60
101602586 L0964-060a 5 Pail
a
Interchanges to Sullair Sullube 32 and Palatek Pallube 32.
108 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
Effective air line lubricant on lift cylinders of can fillers in breweries and bottling
plants. Dissolves and prevents the formation of gum and varnish. Features:
• Exceptional lubricity
Features: • Antifriction
• Removes gumming and sludge • Specifically formulated for medium to high speed
spindle bearings
Applications:
• Hammers
• Impact wrenches Series: No. 1
• Air motors SAE No.: 10W
• Grinders Viscosity @ Temperature: 115 SUS @ 100 °F
• Reamers Flash Point: 345 °F
• Drills Pour Point: -60 °F
• Lift cylinders ISO Grade: 22
SAE No.: 10
Size
Item No. Mfr. No. (lb) Container
Vis. Vis. Flash Air Line Pour
S.U.S. S.U.S. Vis. ISO Point Point API Point 102060050 L0002-013 2 Bottle
@ 100 °F @ 210 °F Index Grade (°F) (°F) Gravity (°F)
147 44 120 32 385 200 27.4 -30
B’laster’s Air Tool Conditioner thoroughly cleans internal pneumatic tool parts,
restoring them to peak performance and prolonging tool life. It breaks loose
deposits that create friction and impede smooth operation. It also provides
Air Tool Oil SAE 10 long-lasting lubrication and protects tools from freeze up.
Features:
• Lubricates and protects pneumatic equipment
• Increases torque; ensures long tool life Features:
• Reduces rust, varnish, sludge and acids • Reduces friction
• Pneumatic wrenches, drills, hammers, saws grinders; for use • Protects tools from freezing down to -25 °F
in all types of pneumatic equipment • Cleans and restores pneumatic tools
SPIRIT 3000 has been optimized for grinding and general machining of cast iron, soft steel and medium hard steels. SPIRIT 3000 has been developed to bring outstanding
performance and benefits, such as extended tool life, parts quality, increased drain interval due to strong resistance to bacteria and fungi, excellent resistance to corrosion,
and suitability for a broad range of water hardness.
SPIRIT 5000 is a semi-synthetic coolant specially formulated for most machining and grinding applications involving ferrous and non-ferrous materials. This product is
chlorine free and offers high emulsion stability, even in hard water.
SPIRIT 6000 is a premium, high performance, semi-synthetic metalworking fluid for heavy-duty machining and grinding of most metals, including automotive and
aerospace alloys.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 109
Lubrication Products & Equipment
LACTUCA Coolant
LACTUCA 5043 S is a general purpose soluble oil, which was designed to perform satisfactorily in light to moderate machining operations.
LACTUCA 5043 S is recommended for machining all carbon steels, aluminum, copper and brass.
LACTUCA 5304 S is a heavy-duty, chlorinated oil, which was designed to perform satisfactorily in all of the most severe machining operations. By design,
this product releases chlorine to form a pressure-resistant barrier between the workpiece and die.
VALONA Coolant
VALONA coolants can be used on all cutting operations on all ferrous and ferrous alloy metals: low carbon steels, stainless steel alloys, hard and very hard
steels (bearing steels), on tensile steels, turning, shaping, milling, grinding. NOT TO BE USED on copper alloy metals (stain risk on workpieces after cutting
operations).
*
Cutting Oil Tapmatic® #1 Gold Cutting Fluid
Thread cutting lubricant for use on all types of metals, including brass, Great for steel and aluminum and excellent for low-speed, high pressure
copper and aluminum. applications. Lubricates and protects to reduce friction and eliminates chip welding
in reaming, drilling, threading and tapping. Contains EP additives, improving
surface finish.
Features: Features:
• Reduces heat and friction • Minimizes increases in torque
• Sulfur-free, low odor formula • Does not contain chlorinated paraffin, water, solvents
• Excellent antiweld properties or inactive fillers
• Clings to vertical surfaces • Foaming action
• Compatible with all threading equipment • Pinpoint stream
• Increases cutting tool life • Excellent on steel and aluminum
• NSF P1 registered for use in meat and poultry plants • Safe on all metals
• Meets Boeing BAC 5008 specifications
Applications: Applications:
• Pipe thread cutting • Boring • Reaming
• Conduit threading • Broaching • Sawing
• Gear cutters • Drilling • Tapping
• Automatic screw machines • Engraving • Threading
• Drills • Facing • Turning
• Reaming • Milling
• Turning
Size Net Wt.
Size Net Wt. Item No. Mfr. No. (oz) (oz) Container
Item No. Mfr. No. (oz) (oz) Container 102100349 40312* 16 11 Aerosol
101843622 14050 16 12 Aerosol 102100589 40320 16 — Bottle
110 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Tapmatic® TriCut® is designed to effectively lubricate severe metalworking Tapmatic® AquaCut Cutting Fluid does not contain any sulfur, chlorine or
operations. TriCut® flows directly on the cutting edge, providing lubrication to chlorinated solvents; contains corrosion inhibitors to prevent flash rustings; will not
improve cutting performance. stain metal; will not contaminate coolants.
Features: Features: Applications:
• Suitable for high and low speed applications • Water-based formula • Boring
• Extends tool life • Nonflammable • Broaching
• Reduces production costs • Non-hazardous • Drawing
• Improves surface finish • Does not contain sulfur, • Drilling
• Allows increased removal rates chlorine or oils • Engraving
• Reduces friction • Short-term corrosion protection • Facing
• Flows directly to cutting edge • Excellent cooling capability • Finishing
• Provides smooth, accurate cutting action • Fine finish • Grinding
• Is noncorrosive to steel • Non-toxic: Will not cause • Milling
• Excellent for stainless steel and other hard to machine metals adverse health effects • Reaming
• All metals, except magnesium • Sawing
Applications: • High speed • Stamping
• Tapping • Broaching • Low pressure • Tapping
• Reaming • Bending • Threading
• Drilling • Forming • Turning
• Threading • Engraving
• Grinding • Boring Size
• Facing • Stamping Item No. Mfr. No. (oz) Container
• Sawing • Drawing 102099485 01216 16 Bottle
• Turning • Precoating
• Milling • Lubricating
Size
Item No. Mfr. No. (oz) Container
102147161 05316 16 Bottle
Tapmatic® Edge Creme Cutting Fluid
The biodegradable, cream formula cutting lubricant does not contain chlorinated
solvents or petroleum distillates.
Tapmatic Natural Cutting Fluid
®
Features:
• Biodegradable
Tapmatic® Natural Cutting Fluid is a high performance, biodegradable, naturally • Does not contain any hazardous chemicals
organic cutting fluid without 1,1,1 trichloroethane. • Squeeze tube allows easy application
• Safe on all metals
Features: Applications:
• Nontoxic, nonhazardous and biodegradable • Boring • Milling
• Does not irritate skin, eyes or respiratory tract • Broaching • Reaming
• Does not contain sulfur, chlorine, chlorinated solvents, water, • Drawing • Sawing
mineral oil or inactive fillers • Drilling • Stamping
• High performance lubricating ability eliminates galling and seizing • Engraving • Tapping
• Safe on all metals • Facing • Threading
• Grinding • Turning
Applications:
• Bending • Lubricating Size
• Broaching • Milling Item No. Mfr. No. (oz) Container
• Boring • Precoating 102099487 43100 10 Tube
• Drawing • Reaming
• Drilling • Tapping
• Forming • Threading
• Engraving • Turning
• Facing • Sawing
• Grinding • Stamping
Tapmatic® Edge Lube Cutting Fluid
Size
Item No. Mfr. No. (oz) Container
The biodegradable, solid bar lubricant is excellent for belt, wheel and disc
102099992 44220 16 Bottle grinding, or sawing applications.
Features: Applications:
• White, solid, waxy bar • Boring
• Biodegradable • Broaching
• Eliminates heat buildup and belt loading • Drilling
• Does not contain any hazardous chemicals • Engraving
• Low toxicity • Grinding
• Safe on most metals • Tapping
• Extends grinding wheel life • Threading
• Turning
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 111
Lubrication Products & Equipment
*
Features:
• With exclusive Perma-Lock® actuator
Bar & Chain Lubricant • Blend of synthetic lubricants and mineral oil designed to keep roller
drive and conveyor chains lubricated
• Penetrates, lubricates and protects moving parts by reducing friction
and wear
Features: • Nondrying film contains antiwear properties to extend chain life
• Antiwear • Foaming action penetrates chain bushings and pins, providing
• Good adhesion properties maximum adhesion
• Formulated with antiwear and tacky additives • CARB: Complies with VOC regulations as detailed by the
Applications: California Air Resource Board
• Chainsaws • OTC: Complies with VOC regulations as detailed by the
Ozone Transport Commission
• LADCO: Complies with VOC regulations as detailed by the
SAE No. 20 Lake Michigan Air Directors Consortium
Size • Complies with RoHS restrictions on the use of certain hazardous
Item No. Mfr. No. (qt) Container substances in electrical and electronic equipment
102071556 L0720-054 1 Bottle • NSF H1 rated for incidental food contact
Applications:
• Conveyor chains
• Packaging machinery
• Hoist chains Color: Clear/Water-White
• Link and roller assemblies Flash Point: >370 °F
• Forklift trucks Temperature Range: 8 °F to 325 °F
Features:
• Increases chain life
• Foaming action
• Moly additive
• NSF registered, H2 rated Food Grade Chain Lubricant
FRIENDLY
Applications:
• Chain drives Food Grade Chain Lubricant is a tenacious, food grade spray lubricant that
• Forklift trucks maximizes chain life.
• Tractors
• Machinery Features:
• Conveyors • Foaming action provides extra penetration and lubrication
• Bicycle chains • Oily, wet film extends chain life
• Sprockets • DETEX™ metal and x-ray detectable plastic components
• Chain saws • Resists sling off and water wash off
Color: Amber • Low flammability with a high flash point
• Roller assemblies
Plastic Safe: Yes • Excellent for applications involving incidental food contact on food
Temperature Range: -20 °F to processing equipment
• NSF® registered H1 #132899
Size Net Wt. Flash Pt. Color: Clear
Item No. Mfr. No. (oz) (oz) Container (°F) Flash Point: 425 °F (liquid)
112934604 SC0202000 16 11 Spray, Aerosol <0 Temperature Range: -20 °F to 325 °F
113420973 SC0202LQ0 16 — Spray, Trigger 50
Size Net Wt.
WARNING: This product contains chemicals known to the State of California to cause
Item No. Mfr. No. (oz) (oz) Container
cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov. 102015891 06016 16 12 Spray, Aerosol
112 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
LU201 Open Gear & Chain & Wire Rope Lubricant
Wire Rope Lubricant
Specifically formulated blend of synthetic lubricants and an organic molybdenum
Penetrates to core of wire rope, minimizing internal friction. antiwear additive that penetrates deep and leaves a tough film that lubricates and
protects. Extends the working life of chains and wire rope and reduces wear caused
Features: by friction and corrosion.
• Displaces water
• Rust protection Features:
• Penetrates pores without heating • Resists water wash-off and high temperature sling-off
• Will not weather away or rub off • Absorbs pin/bushing shock and cushions rollers, pins and bushings
• Extension tube • Can be applied with guards in place to eliminate costly downtime
• NSF registered #131586, H2 • This product is labeled extremely flammable
• Read and observe the special usage warning on the label
Applications: • Do not apply while equipment is energized
• Gears • NSF H2 registered for use in meat and poultry plants
• Wire rope winches
• Elevator cables Applications:
SC0201000 SC0201LQ0 • Wire rope • Winches
• Wire rope
• Gearboxes • Pulleys • Hoists
• Roller chains • Conveyors • Cushion pins
• Machine tools • Overhead door drives • Come-alongs
Color: Black • Chairs • Seals
Temperature Range: 0 °F to 450 °F • Drive chains • O-rings
Plastic Safe: No
Color: Clear/Light Amber
Size Net Wt. Flash Pt. Flash Point: <0 °F
Item No. Mfr. No. (oz) (oz) Container (°F) Max. Temperature: 350 °F
112934602 SC0201000* 16 12 Spray, Aerosol <0 Film Type: Non-Drying
113420983 SC0201LQ0 16 14 Spray, Trigger 50
Size Net Wt.
WARNING: This product contains chemicals known to the State of California to cause Item No. Mfr. No. (oz) (oz) Container
cancer and birth defects or other reproductive harm. For more information, go to 101849740 03050 16 10 Aerosol
www.P65Warnings.ca.gov.
Restricted from sales in CA.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 113
Lubrication Products & Equipment
*
Food Grade Belt Dressing
FRIENDLY FRIENDLY
Provides a temporary, food-grade, synthetic treatment for worn belts. Extends belt
life by reducing slippage, hardening, glazing, dirt buildup and friction. Belt Dressing LU103 Rust Breaker® Penetrant Liqui-Sol™
can be used on leather, rubber, canvas or fabric and is ideally suited for flat, round
and v-belts. Improves traction and reduces belt tension, relieving stress on motors, Quickly loosens rust while penetrating grease and dirt. Displaces moisture and acts
shafts and wheels for improved operating efficiency. as a corrosion preventative.
Features: Features:
• With exclusive Perma-Lock® actuator • Quickly loosens rust
• Tacky • Penetrates grease and dirt
• Nondrying • Transparent
• Resists water wash-off • Nonstaining oil
• Maintains belt flexibility • Displaces moisture; ideal for drying out electrical components
• Prevents loads from slipping on conveyor systems • Resists corrosion
• Colorless – will not stain finished goods transported on • Jet-stream spray
conveyor systems • Nonflammable
• This product is labeled extremely flammable • Dielectric strength: 47,400 vpm
• Read and observe the special usage warning on the label • NSF registered, H2 rated
• Do not apply while equipment is energized
• NSF H1 registered for incidental food contact SC0103LQ0 Applications:
• Meets FDA regulation 21 CFR 178.3570 for incidental food contact • Releasing rusted lugs and bolts
• Lubricating tight fitting parts
Applications: • General overhaul
• Industrial machinery • Repair work Plastic Safe: Yes
• Conveyor systems • Food plant equipment Flash Point: 205 °F
• Portable motorized equipment Color: Light Amber
• Vehicle belts Water Resistant: Excellent Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container
Size Net Wt. 113420974 SC0103LQ0b 16 14 Trigger Spray Bottle
Item No. Mfr. No. (oz) (oz) Container 112934598 SC0103000*, a 16 10 Aerosol
101849911 03065 16 10 Aerosol a
NSF reg. # 115050.
b
NSF reg. # 127753.
An effective and efficient general-purpose penetrant for use on all food processing FRIENDLY
equipment. It penetrates and loosens rust, scale and corrosion around fasteners
and hose fittings on food processing equipment. LU711 The Protector™ All-Purpose Lubricant Liqui-Sol™
Features: Features:
• With exclusive Perma-Lock® actuator • NSF registered, H2 rated
• Highly refined white mineral oil • Environmentally friendly
• Eases disassembly of mechanical equipment, fittings and fixtures • Completely protects metal surfaces from corrosive elements
• Colorless, odorless, tasteless • Safe on plastics
• Other sizes available • Formulated to ensure maximum moisture displacement
• Zero VOC formula • Rust-preventative film inhibits corrosion and penetrates surface
• CARB: Complies with VOC regulations as detailed by the irregularities to release frozen or corroded parts
California Air Resource Board • Ultra-thin and greaseless
• OTC: Complies with VOC regulations as detailed by the • Does not attract contaminants
Ozone Transport Commission • Extension tube
• LADCO: Complies with VOC regulations as detailed by the • Meets Naval Ordinance Weapons Plastic Safe: Yes
Lake Michigan Air Directors Consortium SC0711LQ0 Specifications WS-14138 Flash Point: 140 °F
• Complies with RoHS restrictions on the use of certain hazardous Dielectric Strength: 47 KV
substances in electrical and electronic equipment
• NSF H1 registered for incidental food contact Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container
Color: Clear/Colorless
Plastic Safe: Safe on most plastics 112934620 SC0711000a,* 16 11 Aerosol
Flash Point: 200 °F 113420971 SC0711LQ0b 16 14 Spray, Trigger
Temperature Range: 32 °F to 300 °F a
NSF reg. # 115051.
b
NSF reg. # 133520.
Size Net Wt. WARNING: This product contains chemicals known to the State of California to
Item No. Mfr. No. (oz) (oz) Container
cause cancer and birth defects or other reproductive harm. For more information,
101943983 03086 16 11 Aerosol go to www.P65Warnings.ca.gov.
114 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
2-26® Multi-Purpose
LU777 Outdoor Metal Protectant Precision Lubricant
Features: Multi-purpose, plastic-safe lubricant, penetrant and corrosion inhibitor that helps
• A waxy, heavy-duty rust inhibitor prevent electrical malfunctions caused by water penetration, humidity, condensation
• Formulated to stand up to the most severe weather conditions or corrosion. 2-26® drives out moisture and leaves a thin, long-lasting film to protect
• Provides more than 1,200 hours of protection against salt spray against corrosion.
• Provides a barrier that guards against humidity
• Contains no silicone or chlorinated solvents Features:
• 98% usable product • Cleans light soils and contaminants
• Easily removed with mineral spirits • Loosens corrosion
• NSF reg. #127500, H2 rated • Displaces moisture; ideal for drying out electrical components
• Restores resistance values
Applications: • Safe for polycarbonates, ABS, Noryl®
• Bodies and frames • Electrical equipment • 360° spray valve can be sprayed from the up or down position
of machines, storage • Sheet steel • Helps prevent electrical malfunctions
tanks and containers • Threads • Prevents corrosion
• Castings • Locks • Helps stop current leakage
• Industrial parts and • Dies • Helps restore water-damaged electrical equipment
machines • Gears • CARB: Complies with VOC regulations as detailed by the
• Molds • Cables California Air Resource Board
• Generators Film Type: Waxy • OTC: Complies with VOC regulations as detailed by the
Ozone Transport Commission
Size Net Wt. • LADCO: Complies with VOC regulations as detailed by the
Item No. Mfr. No. (oz) (oz) Container Lake Michigan Air Directors Consortium
112934624 SC0777000 16 11 Aerosol • Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
WARNING: This product contains chemicals known to the State of California to cause • NSF H2 registered for use in meat and poultry plants
cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov. Applications:
• Electrical connectors • Starters
• Relays • Tubing
• Circuit breakers • Wire
• Transformers • Fixtures
• Switchgears • Drill rods
• Motors • Heat-treated parts
• Generators • Machine surfaces
• Controls • Finished welds
The Original PB™ B’laster Penetrant • Electronics • Modern plastics and insulators
• Alarm systems
Color: Amber
Plastic Safe: Yes
Features: Flash Point: 200 °F
• #1 selling penetrant Max. Temperature: 250 °F
• Breaks free rusted or frozen parts
• Protects against further rust and corrosion Size Net Wt.
• Use on automotive, industrial, marine, plumbing and Item No. Mfr. No. (oz) (oz) Container
other equipment
101851932 02005 16 11 Aerosol
• ProStraw™ with Control Flow Technology™
Noryl® is a registered trademark of the General Electric Corp.
Size
Item No. Mfr. No. (oz) Container SP-350™ Corrosion Inhibitor
116447032 16-PB-DS 11 Aerosol
Provides both superior lubrication and heavy-duty corrosion protection for metal
parts and assemblies that are stored indoors.
Features:
Screwloose® Super Penetrant • Displaces moisture and protects all metals with a thin, nondrying film
• Protects equipment and parts in storage, shipment and in process for
Quickly penetrates through rust and corrosion to rapidly free corroded bolts, up to two years indoors
screws, fasteners, pins and bound mechanisms. • Promotes easy equipment startup
• Convenient 360° spray valve – can be sprayed from the up
Features: or down position
• Eases disassembly • High pressure lubricant that withstands up to 1,250 lb of pressure in
• Penetrates minute and tightly filled crevices Falex test method
• 360° spray valve – can be sprayed from the up or down position • CARB: Complies with VOC regulations as detailed by the
• NSF H2 registered for use in meat and poultry plants California Air Resource Board
• VOC compliant • OTC: Complies with VOC regulations as detailed by the
Ozone Transport Commission
Applications: • LADCO: Complies with VOC regulations as detailed by the
• Nuts and bolts • Snaps Lake Michigan Air Directors Consortium
• Pins • Lug nuts • Complies with RoHS restrictions on the use of certain hazardous
• Screws • Caps substances in electrical and electronic equipment
• Bushings • Locks • Recommended as a final film that is used for precision
• Clips • Washers machine surfaces
• Hinges • Sliding mechanisms Color: Light Amber • NSF H2 registered for use in meat and poultry plants
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 115
Lubrication Products & Equipment
* †
116 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
Features: Features:
• Teflon™ fluoropolymer helps reduce friction and wear • Stops squeaks
• Protects surfaces • Removes and protects
• Enhances performance • Loosens rusted parts
• Light vanilla scent • Frees sticky mechanisms
• Use on all moving parts • Dries out moisture
• More than 1,000 indoor and outdoor applications • 50-state VOC compliant
Features: Features:
• Teflon™ fluoropolymer helps reduce friction and wear • 8” flexible straw
• Won’t accumulate dust and dirt • Straw bends and keeps its shape
• Quiets noisy operation • Sprays 2 ways™
• 50-state VOC compliant
Size
Size Net Wt.
Item No. Mfr. No. (oz) Container
Item No. Mfr. No. (oz) (oz) Container
115746598 490194 14.4 Aerosol
106534584 16-GDL 16 9.3 Aerosol
WD-40® Specialist® Spray & Stay Gel Lubricant WD-40® BIG BLAST®
Features: Features:
• Specially formulated for long-lasting protection that will not run, drip • Protects metal from rust and corrision, penetrates stuck parts,
or make a mess displaces moisture and lubricates almost anything
• Twelve times longer lubrication • Features a wide-area spray nozzle, designed to deliver product quickly
• Prevents rust for up to one year and efficiently over large areas
• Perfect for vertical surfaces • 50-state VOC compliant
• Resists water and displaces moisture
Size Size
Item No. Mfr. No. (oz) Container Item No. Mfr. No. (oz) Container
113417956 300103 10 Aerosol w/ Trigger 111281903 490095 18 Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 117
Lubrication Products & Equipment
* †
The greaseless lubricant that penetrates quickly, displaces moisture and will not
attract dust or dirt.
Features:
• Stops squeaks Features:
• Removes and protects • Dries quickly
• Loosens rusted parts • Resists oil, dust and dirt
• Frees sticky mechanisms • Fast-acting penetration
• Dries out moisture • Thin, dry film
• Smart Straw sprays two ways • Resists buildup
• Flip up for stream, down for spray • Resists rust
• 50-state VOC compliant • Inverta spray valve
• Safe on most plastics
• NSF® registered H2 #059847
Size • VOC compliant in all 50 states
Item No. Mfr. No. (oz) Container
112796061 490040 11 Aerosol Applications:
111269792 490057 12 Aerosol • Cables
• Circuit breakers
• Electric motors
• Electronic connectors
• Generators
• Hinges
• Ignition systems Color: Amber
• Locks Plastic Safe: Safe on most plastics
KB-88 The Ultimate Penetrant Flash Point: 175 °F
Net Wt.
The lightning quick, deep penetrant that makes the toughest maintenance job easier. Item No. Mfr. No. Size (oz) Container
102101447 00116* 16 oz 11 Spray, Aerosol
Features: 102100049 00122 20 oz — Spray, Trigger
• Quickly releases rusted and corroded nuts, bolts, hinges and other 102051823 01128 1 gal — Can
frozen components 102100590 00105 5 gal — Pail
• High KB solvency value of 151 and low surface tension 102101452 00155† 55 gal — Drum
• Enhanced penetration and lubrication
• Outperforms the competition in independent lab tests
• Penetrates faster and deeper than most other similar products
in the marketplace
• Inverta spray valve
• CARB: Complies with VOC regulations as detailed by the
California Air Resource Board
• NSF® registered H2 #138554
Applications: * †
• Bearings • Hinges
• Bolts • Nuts
• Chains • Plumbing fixtures
• Conveyors • Pulleys
• Corroded fasteners • Screws LPS 3® Premier Rust Inhibitor
• Equipment disassembly • Shafts
The long-term, waxy film, premier rust inhibitor that protects even in the harshest
environments.
Flash Point: 150 °F
Features:
Net Wt.
Item No. Mfr. No. (oz) Container
• Protects up to two years
• Stops rust and corrosion
102100819 02316 13 Aerosol • Provides nonsling lubrication
• Self-healing, waxy film
• Antiseize coating
• Does not contain any ozone-depleting substances
Purchase New or Repair? • Safe on all metals
• VOC compliant in all 50 states
• Meets Boeing BMS-3-23G Type II specifications
• NSF® registered H2 #129027
Frequently, it is more cost effective to repair or
rebuild parts than to purchase new ones. Our
Applications:
associates can identify what’s best for your worn • Aircraft fuselages • Metal parts
parts and assemblies, whether it’s repair, rebuild, • Battery terminals • Offshore drilling equipment
• Cables, chains and pulleys • Outdoor electrical connections
replacement or even a new, more efficient system. • Cargo sections • Outdoor storage and shipments
Parts are reworked to their original or improved • Elevators • Pumps and hose assemblies
• Interior sections of
design specifications and fully tested. vehicle doors
118 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
FRIENDLY
Color: Amber
Plastic Safe: Safe on most plastics
Flash Point: 175 °F
Temperature Range: -35 °F to 250 °F * †
Net Wt.
Item No. Mfr. No. Size (oz) Container
102104343 00216* 16 oz 11 Spray, Aerosol TKX® All-Purpose Lubricant
102051822 00222* 20 oz — Spray, Trigger
102051826 02128 1 gal — Jug An all-purpose lubricant with an oily film, penetrates to loosen frozen parts and
102100818 00205 5 gal — Pail protects against corrosion.
Features:
• Protects against corrosion
• Loosens rusted or frozen parts
• Excellent protective coating for power/hand tools
• Displaces moisture; ideal for drying out electrical components
• Safe on plastic and most surfaces
• Does not contain chlorinated solvents or silicones
• VOC compliant in all 50 states
• NSF® registered H2 #059842
Applications:
Magnum Premium Lubricant with PTFE • Bearings • Gears
Magnum is specially formulated with ultra-high lubricity that minimizes friction and • Bushings • Hinges
extends equipment life. • Cable connections • Nuts and bolts
• Chains • Pulleys
Features: • Conveyors • Rollers
• High performance lubricant with PTFE additives • Cranes • Saws
• Displaces moisture • Drives • Screws
• Ultra-high lubricity • Fasteners • Shafts
• Penetrates and protects metal against rust and corrosion • Fixtures • Wire ropes
• VOC compliant in all 50 states • Forklifts
• Ideal for both regular and extreme conditions
• Safe to use on most surfaces Net Wt.
• Does not contain silicone Item No. Mfr. No. Size (oz) Container
• NSF® registered H2 #128980 102101446 02016* 16 oz 11 Spray, Aerosol
102101632 02028 1 gal — Can
Applications: 102100817 02055† 55 gal — Drum
• Bearings • Gears
• Bushings • Hinges
• Cable connections • Nuts and bolts
• Chains • Pulleys
• Conveyors • Rollers
• Cranes
• Drives
• Saws
• Screws
Not Finding What You Need?
• Fasteners • Shafts
• Fixtures • Wire ropes Need something not shown in the catalog?
• Forklifts
Color: Brown Applied Industrial Technologies has a wide
Flash Point: 175 °F range of supplies to meet your needs. Give
Size Net Wt. us a call, and we’ll be happy to assist you!
Item No. Mfr. No. (oz) (oz) Container
102101631 00616 16 11 Spray, Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 119
Lubrication Products & Equipment
*
Features:
Features: • Ideal where a dry lubricant is required or where petroleum products
• Inhibits rust must be avoided
• Protects against moisture and corrosion • Adheres with minimum pretreatment
• Rejects dirt, dust, sand and abrasive particles • Effective up to 850 °F constant and 1,000 °F intermittent
• Temperature range from -60 °F to 475 °F • Excellent conductivity
• Does not contain any greenhouse gas propellants • Dries rapidly at room temperature
• NSF registered, H2 • Coefficient of friction 0.123
• Does not contain any greenhouse gas propellants
Applications: • NSF registered, H2
• Moving and sliding parts • Drive chains
• Cables • Hinges Applications:
• Nuts and bolts • Rollers • Preassembly lubrication of moving parts
• Conveyors • Taps and dies • Mechanisms of vending machines and parking meters
• Cutting tools • Valves • Automotive and industrial gaskets
• Bearings
Item No. Mfr. No. Size Container • Locks
101913016 TF21010 2 oz Bottle, Plastic • Springs
113421028 TF200251* 8 oz Aerosol • Hinges
• Mating surfaces on machines
113421008 TF200271* 12 oz Aerosol Color: Black
• CRTs
101925737 TF29200 18 oz Spray, Trigger • Plating nonconductors Plastic Safe: Yes
113421245 TF260201 1 gal Jug • Curing ovens Flash Point: -20 °F
Max. Temperature: 850 °F
WARNING: This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information, go to Size Net Wt.
www.P65Warnings.ca.gov. Item No. Mfr. No. (oz) (oz) Container
112934606 SC0204000 16 10 Spray, Aerosol
110402292 S00204INV 20 13 Inverted Spray, Aerosol
WARNING: This product contains a chemical known to the State of California to
cause birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Features:
• Penetrates pores of substrate and bonds to surface for Dry Graphite Lube
long-lasting lubrication
• High pressure, high solids, molybdenum disulfide coating Features:
• Withstands pressures up to 50,000 psi • Bonds instantly to metal, rubber, plastic and most substrates
• Air dries in 5 to 10 minutes; cures in two hours at room temperature • Resists dirt, dust and oil buildup
• Maintains effectiveness under high temperatures • Wide effective temperature range up to 850 °F constant
• Nonconductive • Excellent conductivity
• Equipped with EZ Touch™ standard nozzle • Ideal where a dry lubricant is required or where petroleum products
• Does not contain any greenhouse gas propellants must be avoided
• NSF registered, H2 • This product is labeled extremely flammable
• Read and observe the special usage warning on the label
Color: Black • Do not apply while equipment is energized
Plastic Safe: Yes
Flash Point: < 0 °F
Max. Temperature: 650 °F continuous; 750 °F intermittent Color: Black
Plastic Safe: Yes
Size Net Wt. Max. Working Temperature: 850 °F
Item No. Mfr. No. (oz) (oz) Container
112934601 SC0200000 16 11 Spray, Aerosol Net Wt.
Item No. Mfr. No. (oz) Container
WARNING: This product contains chemicals known to the State of California to cause 101844061 03094 10 Spray, Aerosol
cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov. WARNING: Reproductive harm - www.P65Warnings.ca.gov.
Applied Industrial Technologies is your go-to source for a full line of conveyor components to help you
achieve the performance specifications for virtually every aspect of the conveying chain. Our nationwide
network of distribution centers, conveyor shops and service centers carries a vast selection of conveyor
solutions from the industry’s most trusted brands.
120 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Dry PTFE Lube Force 842°® Dry Moly Lubricant
A multi-purpose, micro-thin film containing PTFE. Penetrates and bonds to most Force 842°® is a dry film lubricant with moly that performs superbly under
surfaces, including metal, wood, rubber, plastic and glass. extreme conditions, such as high temperatures and pressures that protect against
surface to surface friction.
Features:
• Resists dirt, dust and buildup Features:
• Prevents sticking, thus reducing friction and wear • Provides a quick-drying, thin film
• Seals out moisture and provides a barrier film that inhibits corrosion • Water and chemical resistant
• Ideal for sliding mechanisms and light load applications • Resists dust and dirt
• NSF H2 registered for use in meat and poultry plants • High adhesion
• Prevents seizure of parts
• For assembly and break-in lubrication
Applications: • Works under high temperatures 842 °F (450 °C) and pressures
• Metal 100,000 psi (6,890 Bars)
• Wood
• Rubber
• Plastic Applications:
• Glass • Bearings • Gears
• Pulleys • Bushings • Hinges
• Conveyors • Cable connections • Nuts and bolts
• Chutes • Chains • Pulleys
• Hinges • Cranes • Rollers
• Locks • Conveyors • Saws
• Coin mechanisms • Drives • Screws
• Electrical wires Color: Hazy White • Fasteners • Shafts
• Switches Flash Point: <20 °F • Fixtures • Wire ropes
• Harnesses Temperature Range: -40 °F to 450 °F • Forklifts
Features: A dry film lubricant with strong bonding PTFE for severe temperature and pressure
• High antifriction and antiseizure properties applications. Excellent mold release.
• Lubricant resists high temperatures, high pressure, water and
chemical attack Features:
• Fast-drying film resists dirt and dust buildup • Colorless thin dry film that will not attract dust or dirt
• This product is labeled extremely flammable • Ideal for releasing molded parts
• Read and observe the special usage warning on the label • Excellent for high temperature applications up to 500 °F (260 °C)
• Do not apply while equipment is energized • Provides excellent lubrication
• Petroleum base
Applications: • Does not contain silicone
• Chains • Non-staining
• Conveyors Applications:
• Gears • Chutes and slides
• Gaskets • Conveyor belts
• Hoists • Injection molding
• Motors • Locks and catches
• Rollers • Metal extrusions
• Silicone rubber
Plastic Safe: No • Tanks and bins
Flash Point: -20 °F • Thermoplastics
Max. Temperature: 650 °F continuous; 750 °F intermittent • Thermosets
• Window guides Color: Translucent White
Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container
Size Net Wt.
101844172 03084 16 11 Spray, Aerosol Item No. Mfr. No. (oz) (oz) Container
WARNING: Reproductive harm - www.P65Warnings.ca.gov. 102101455 02616 16 12 Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 121
Lubrication Products & Equipment
® ®
Features: Features:
• Teflon™ fluoropolymer helps reduce friction and wear • Reduces friction and galling even on metal-to-metal contact areas
• Long-lasting lubrication • High temperature (-100 °F to 450 °F), high pressure (withstands
• Won’t accumulate dust and dirt 1,200 lb Falex test)
• High grade release and parting agent
• Clear, nonstaining, odorless film resists moisture
• Use on all metallic and nonmetallic surfaces
Color: Clear • 360° spray valve – spray in the up or down position
Flash Point: 130 °F • CARB: Complies with VOC regulations as detailed by the
California Air Resource Board
Size Net Wt. • LADCO: Complies with VOC regulations as detailed by the
Item No. Mfr. No. (oz) (oz) Container Lake Michigan Air Directors Consortium
110645845 16-SL 16 11 Aerosol • OTC: Complies with VOC regulations as detailed by the
Ozone Transport Commission
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
• This product is labeled extremely flammable
Download Today!
• Read and observe the special usage warning on the label
• Do not apply while equipment is energized
• NSF H2 registered for use in meat and poultry plants
122 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
WD-40® Specialist® Water Food Grade Silicone Lubricant
Resistant Silicone Lubricant with DETEX® FRIENDLY
Features: The dry film, food grade silicone lubricant that is safe on all surfaces, and protects
• Safely lubricates, waterproofs and protects metal and non-metal rubber and plastic parts.
surfaces, including rubber, plastic and vinyl Features:
• Dries fast and leaves a clear, non-staining film that doesn’t stick or • Contains silicone
make a mess, so it won’t attract dirt • Provides excellent lubrication
• Lasting rust protection • Ideal for releasing molded parts
• Effective in a temperature range from 100 °F to 500 °F • Does not contain chlorinated solvents
• Ideal for use on cables, pulleys, guide rails, valves, linkages, hinges, • Dry film will not attract dust or dirt
locks and more • DETEX™ metal and x-ray detectable plastic components
• 50-state VOC compliant • Appropriate for food processing and handling equipment
• Excellent for high temperature applications up to 500 °F
• NSF® certified: H1 Registration #113815
Size
Item No. Mfr. No. (oz) Container
112052552 300012 11 Aerosol w/ Trigger Color: Clear
Seal, lubricate, protect and insulate electrical connections with this thin, noncuring
silicone compound. Waterproofs electrical connections and components to protect MR311 Dry Film Release Agent
against arcing due to moisture and other contaminants.
Features: Features:
• With exclusive Perma-Lock® actuator • Nonsilicone mold release
• Improves electrical performance during adverse conditions, • Antistick
such as rain, fog, salt spray and temperature extremes • Nontransferable
• This product is labeled extremely flammable • Multiple releases per application
• Read and observe the special usage warning on the label • Safe for rubber, paints and metal
• Do not apply while equipment is energized • Temperature molds up to 575 °F
• Meets FDA regulation 21 CFR 175.300 (release agent) • 5% PTFE
• Meets FDA regulation 21 CFR 178.3570 (lubricant, incidental • Does not contain any ozone-depleting substances
food contact)
• NSF H1 registered for incidental food contact Applications:
• Polystyrenes
• Polypropylenes
Applications: • Nylon
• Electrical contacts • Rubber
• Spark plugs • Filament windings
• Battery terminals • Polyurethane
• O-rings • Epoxy potting
• Rubber and plastic parts Color: White • Phenolic resins
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. WARNING: This product contains a chemical known to the State of California to
cause birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 123
Lubrication Products & Equipment
FRIENDLY
Formulated for light-duty applications where post-mold painting is not required. The rapid-dry, antistick mold release agent is suitable for hot and cold molds.
Features: Applications:
• Plastic safe • General-purpose
• Light-duty silicone content (3%) • Industrial
• Long-lasting lubrication helps produce more parts in less time • Where post-mold paint is not required
• Colorless, odorless, nonstaining, noncorrosive formula
• Meets FDA regulation 21 CFR 175.300 (release agent)
• Meets FDA regulation 21 CFR 178.3570 (lubricant, incidental food contact)
• NSF M1 registered
Color: Clear
124 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Wind Energy Products
CEPLATTYN BL Lubricant
Features:
• High-grade lithium-soap paste on a synthetic oil basis
• Contains a synergetically effective combination of white solid lubricants,
URETHYN XHD 2 Fully Synthetic Polyurea Grease
which damp shock loads and reduce wear Features:
• Provides extensive protection against wear, even when subject to shock • Fully synthetic polyurea grease for extreme application conditions
load and oscillatory movement • Wide temperature range
• Prevents fretting corrosion • Excellent stability against aging
• Provides excellent corrosion protection • Very high pressure absorption
• Permits long lubrication intervals • Excellent lubricity also under vibrations, oscillations and shock loads
• Very resistant to aging • Very good water resistance
• Permits machines and systems subject to extreme stress to • Good corrosion prevention
function reliably • Good pumpability in central lubrication systems
• OEM Turbine approval: GE, Nordex, Acciona, Goldwind, Clipper, • OEM Turbine Approval: GE, Nordex, Senvion
Senvion, Mitsubishi
Color: Beige
NLGI No. 2 Temperature Range: -45 °C to 130 °C NLGI No. 2 Temperature Range: -40 °C to 180 °C
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 125
Lubrication Products & Equipment
MultiPoint Automatic Lubricator
MultiPoint, SKF’s centralized automatic lubricator, is cost effective for multiple grease lubrication points. Once the correct grease dispense rate for your application is
calculated using DialSet, SKF’s relubrication calculation program, MultiPoint, will keep up to eight lubrication points simultaneously and automatically lubricated, preventing
both over- and under-greasing.
Features: Lubricant: Standard SKF 420 mL Grease Cartridge
• Easy to use Temperature Range: 32 °F to 120 °F
• Electronic setting and readout of control parameters Thread: G1/4
• Alarm function for blocked feed lines and empty Max. Pressure: 600 psi
grease cartridge
• Machine steering (i.e., lubricator only operates while Max Length
machine is running) No. of of Feed Lines Power
• Uses standard SKF grease cartridges Item No. Mfr. No. Feed Lines (ft) Supply
• DialSet delivers accurate calculation of the correct 110-240 VAC
relubrication intervals 101169773 LAGD 400 Up to 8 16 24 VDC
50-60 Hz
Features: Applications:
• Filled with high quality SKF greases • Remote mounting for lubrication in hazardous
• Temperature independent dispense rate and restrictive locations
• Dispense rate from 1 to 24 months • Applications requiring high lubricant consumption
• Available in two versions: TLMR 101 powered by • Excellent water and dust protection makes TLMR suitable for
batteries (standard Lithium AA type) and TLMR 201 general machinery applications and food processing machinery
powered by 12 to 24 VDC • Excellent high temperature performance makes TLMR suitable
• Available with non-refillable cartridges in two sizes: for engine rooms and hot fan applications
120 and 380 ml • Excellent low temperature performance makes TLMR suitable
• Easy to install and use for wind turbine applications
• High protection (IP 67) against water and dust
• Remote mounted up to 16 ft from application
TLMR101/ TLMR201/
38WA2 38WA2
126 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Continued from previous page.
Features:
• Helps extend equipment life • Continuous, low maintenance, long term lubrication
• A constant renewal of the lubricant helps ensure • Permanent supply of lube points with fresh lubricant
equipment availability • Consistent lubrication increases equipment availability
• Reliable, clean and precise lubrication around the clock • Energy cost reduction
• Discharge periods from 1 to 12 months • Increase plant safety
• Lubricant volume 60 cc to 250 cc (2.03 oz to 8.45 oz) • Extended exchange intervals
• Operating conditions appropriate for indoor and • Reduced maintenance
outdoor temperatures • Time spent in danger zones is reduced
• Increases production uptime • Significantly reduces the risk of workplace accidents
• Continuous production processes and predictable
maintenance intervals
M-Power G-Power
Applications: Applications:
• Pillow blocks • Bearings
• Ball bearings • Guideways
• Industrial components
NLGI No.2
NLGI No.2
Reservoir
Capacity Reservoir
Item No. Mfr. No. Description (cc) Capacity
101195437 PM202000a M-Power Single Point Lubricator N/A Item No. Mfr. No. Description (cc)
101192983 PM281217b M-Power Single Point Lubricator 250 101112337 PG101220c G-Power Single Point Lubricator 120
101195451 PM242220 M-Power Single Point Lubricator 120
a
Drive unit.
b
Cartridge. c
Requires activator screw, which is sold separately.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 127
Lubrication Products & Equipment
M-Power Lubricator Accessory
Features:
• Delivers small, consistent amounts of grease or oil
• Powered by electrochemical reactions or electromechanical drive units
• Interchangeable with other brands
• Can be filled with nine Timken-formulated greases or more than 120 types of commercial lubricants
Applications:
• Bearings
• Chains
• Guideways
• Industrial components
120 cc 250 cc
Features:
• Dispenses lubricant volume of 120 cm³ during a period of one, three, six or twelve
months, depending on operating conditions
• Activator is screwed in the lubrication system and the eyelet torn off
128 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Streamliner® Automatic Grease Dispenser
Lubricators control and dispense grease automatically to machine parts.
Features:
• Anodized aluminum base
• Clear, polycarbonate reservoir
• Each unit supplied with three different spring sizes
GL-P Plastic Reservoir
Reservoir
Thread Size NPT Capacity Spring
Item No. Mfr. No. (in) (oz) Force
100873384 33301 1/8 2 1/2 Light, Medium, Heavy w/ Each Model
100873385 33302 1/4 2 1/2 Light, Medium, Heavy w/ Each Model
GL-P Series S Series 100873386 33303 3/8 2 1/2 Light, Medium, Heavy w/ Each Model
100873387 33304 1/2 2 1/2 Light, Medium, Heavy w/ Each Model
Features:
• Double-spring design for more uniform dispensing pressure
• Clear reservoir
• Five different control settings
• Refillable through zerk fitting
Streamliner® S
Reservoir
Thread Size NPT Capacity Spring
Item No. Mfr. No. (in) (cc) Force
101629531 33392 1/4 100 Heavy (15 psi)
Designed for applications where it is essential to have precise amounts of grease delivered to critical machine parts and is a cost-effective alternative to
fully integrated lube systems or manual lubrication. Has a variable dispensing rate from half to 12 months and is controlled by a microprocessor to ensure
reliable and predictable lubricant delivery. Grease pouch and battery pack sold separately as service pack.
Features:
• Easy-to-read LCD display
• Indication of grease pouch and battery replacement
• Indication of motor overloading along with date
• Indication of days remaining until service is needed
Reservoir
Thread Size NPT Capacity
Item No. Mfr. No. (in) (cc) Dispensing Rates
113139461 33385 3/8 60 Half, 1, 2, 3, 6 and 12 months
100873399 33347 3/8 125 Half, 1, 2, 3, 6 and 12 months
100873400 33348 3/8 250 Half, 1, 2, 3, 6 and 12 months
110650910 33410 3/8 500 Half, 1, 2, 4, 6, 12, 18 and 24 months
Capacity NLGI
(cc) No. Grease Type Thickener Type Battery Type Item No. Mfr. No.
Exxon Unirex EP2 Aluminum Complex Thickener Alkaline 117463855 33531
60 2 Mobil SHC 100 Lithium Complex Thickener Alkaline 113139465 33389
Mobilith xHP 222 Lithium Complex Thickener Alkaline 113139463 33387
Exxon Unirex EP2 Aluminum Complex Thickener Alkaline 100873402 33350
125 2 Mobilith SHC 220 Lithium Complex Thickener Alkaline 100873405 33353
Mobilith xHP 222 Lithium Complex Thickener Alkaline 100873401 33349
Exxon Unirex EP2 Aluminum Complex Thickener Alkaline 100873407 33357
250 2 Mobilith SHC 220 Lithium Complex Thickener Alkaline 100873410 33360
Mobilith xHP 222 Lithium Complex Thickener Alkaline 100873406 33356
Exxon Unirex EP2 Lithium Complex Thickener Alkaline 113139471 33413
500 2 Mobilith SHC 220 Lithium Complex Thickener Lithium 110715876 33422
Mobilith xHP 222 Lithium Complex Thickener Lithium 113139483 33418
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 129
Lubrication Products & Equipment
Boiler Feed Pump Kit Portable Pneumatic RAM Oil
Pump w/ Bung Adapter
Boiler feed pumps need to “breathe,” equalizing pressure when air expands and
contracts due to temperature fluctuations or startup/shutdown situations. Especially in Features:
harsh, hot, high humidity environments, this breathing allows ingression of moisture • Withstands even the most extreme conditions
and particulates into the oil system. The solution is the Boiler Feed Pump Kit of proven • Handles challenging oil applications with ease
products configured specifically to keep the air and oil clean and dry inside boiler feed • Fast
pumps. • Quiet
• Easily handles fluids up to SAE 140
Includes: • Pump mounts to 1 1/2” suction pipe from remote tank
• Closed system oiler with wire guard • Capable of pumping at rates up to 20 gpm
• EX desiccant breather 1/2” FNPT (39110) • Resists the effects of freezing
• 316 stainless steel fittings
• Stainless braided flex line
• Sump bottle Material Inlet NPTF (f): 1 1/2 in
Material Outlet NPTF (f): 1/2 in
Drum
Size Delivery Pump
Item No. Mfr. No. (lb) (gpm) Ratio
100874962 9969-B 55 7 5:1
Item No. Mfr. No. Type
117578276 BFP-001 8 oz Closed System Oiler
130 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
High Pressure Standard-Duty
Portable Pneumatic RAM Pump Stationary Pump
Features: Recommended for piped installations of moderate length. Handles fibrous,
• Quiet operation and quick serviceability multi-purpose chassis lubricants.
• Flexible follower works with straight and
tapered containers Features:
• Air connector
• Do not operate pump at higher pressure than lowest rated part
of system
Includes:
Delivery: 4.5 lb/min • Follower plate
Material Outlet NPTF (f): 3/8 in • Drum cover
Air Inlet NPTF (f): 1/4 in • Connector
• Quick-detach coupler
Drum Pump
Item No. Mfr. No. Size Ratio
Accessories
100874934 9911-A1 35 lb Drum & 70 lb Bulk Grease 50:1
Mfr. No. Desc.
Required accessories: Follower 338802 is needed when using a 70 lb lubricant container;
Follower 337665 is needed when using a 35 lb lubricant container. 326463-B1 Lube Tube Strainer
Drum
Size Delivery Pump
Fuel Transfer Pump
Item No. Mfr. No. (lb) (gpm) Ratio
100874818 7786-A5 400 12 75:1 Features:
• Safely transfers diesel, kerosene and
mineral spirits (not for use with gasoline)
Medium Pressure PML • Weatherproof cast-iron design with
high-flow 1” inlet and outlet
Fluid Dispensing Pump • Three-piece telescoping pick-up tube
supports a very wide range of tank depths
Recommended for piped installations of short to moderate length. Easily handles • Long 13 ft anti-kink hose with stainless
fluids up to SAE 140. steel outlet adapter
• 360° locking 2” bung for perfect
nozzle positioning
• Pre-wired electrical box allows for
easy set-up
• Fully serviceable
• Diesel and kerosene applications,
Applications: including agriculture, heavy equipment,
• Light oils construction, trucking/transport,
industrial, aerospace and home heating
• For use with diesel, kerosene and mineral
spirits only (not for use with gasoline)
Air Inlet NPTF (f): 1/4 in
Flow
Drum Delivery Pump Item No. Mfr. No. Voltage (gpm)
Item No. Mfr. No. Size (gpm) Ratio 111741857 1550 12 15
100874959 9968 Stub 7 5:1
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 131
Lubrication Products & Equipment
*
Fire-Ball® 300 Series 5:1 Air-Operated Oil Piston Pump
Features: Applications:
• Thick cast aluminum air motor housing offers • Continuous-duty fluid transfer to multiple metered dispense points
unmatched durability • Automotive dealerships
• Non-corrosive air motor design for long life • Heavy-duty dealerships
• Double-acting pump ensures smooth fluid flow • Fast lube centers
• Fewer moving parts in the air motor assembly means • Fleet service facilities
less downtime and low repair cost • Service shops
• In-plant
• Lube trucks
Air Inlet: 3/8 in NPT(f) • Mining
Fluid Inlet: 1 1/2 in NPT(f)
203876 225640 Fluid Outlet: 1/2 in NPT(f)
Max. Fluid Pressure: 900 psi
Operating Pressure: 40 psi to 180 psi
Fluid Medium: Automatic Transmission
Fluid, Gear Oil, Hydraulic Oil, Motor Oil, Packages
Bare Pump Synthetic Oil Container Volume Air Hose Fluid Hose
Item No. Mfr. No. (gal) (in x ft) (in x ft) Mount
Container Volume 100333183 225094*, a 16 3/8 x 6 1/2 x 6 Bung
Item No. Mfr. No. (gal) 100333189 225640*, a 55 3/8 x 6 1/2 x 6 Bung
100332843 203876 Universal 100333202 225931*, a 275 3/8 x 6 1/2 x 6 Bung
100332862 204254 55
100333075 222087 275 WARNING: This product can expose you to chemicals including lead, which
are known to the State of California to cause cancer and birth defects. For more
WARNING: This product can expose you to chemicals including lead, which information, go to www.P65Warnings.ca.gov.
are known to the State of California to cause cancer and birth defects. For more a
Use 3/8” air regulator (109075) as required. Order low-level cut-off (203688) separately
information, go to www.P65Warnings.ca.gov. for metered dispense systems.
Features:
• Excellent for abrasive, low-to-medium viscosity fluids and shear-sensitive materials
• Pump is never immersed inside the drum (only the suction tube is immersed)
• Quick priming and immediate flow of product Air Inlet: 1/4 in NPTF
• Handles fluid viscosities up to 5,000 cPs and solids up to 0.09” Fluid Inlet: 3/4 in NPTF
• Runs dry without damage Displacement: 0.04 gpm
• Provides airtight seal for moisture-sensitive fluids Max. Working Pressure: 100 psi
• Bung adapter fits into any 2” bung opening Max. Air Consumption: 28 cfm
• Easy-out seal provides fast slide in and out of drums without disconnecting hoses Air Exhaust: 3/8 in NPT
• Easy-out seal accommodates slightly off-sized drums up to 2 1/2” Air Pressure Operating Range: 25 psi to 100 psi
Max. Pumpable Solids Size: 0.094 in
Max. Pump Cycle Speed: 400 cpm
Applications:
• Industrial solvents: Max. Fluid Outlet
aromatic, esters, ketones, chlorinated solvents Flow Body/Wetted NPTF
• Adhesives: contact cement, white glue, resins Item No. Mfr. No. (gpm) Parts Material (in)
• Decorative/protective coatings: paints, stains, varnishes, solvents 100344905 233051 12 Polypropylene 1/2, 3/4
• Lubricants/coolants: motor oil, hydraulic fluids, cutting fluids, antifreeze 100344909 233055 14 Aluminum 3/4
• Cleaners/sanitizers: soaps, detergents, solvents, acids, caustics
• Inks: flexographic, silk screen WARNING: Cancer - www.P65Warnings.ca.gov.
132 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
*
Fire-Ball® 300 Series Air-Operated Fire-Ball® 425 Series Air-Operated
Grease Piston Pumps and Packages Grease Piston Pump Package
Features:
Features: Applications:
• Corrosion-resistant design utilizes liquid salt nitriding,
• Thick cast aluminum air motor • Automotive dealerships
nickel plating, stainless steel, aluminum and chrome on key
housing offers unmatched • Heavy-duty dealerships
components for longer life
durability • Fast lube and service centers
• Few moving parts in the air motor assembly mean less downtime
• Non-corrosive air motor • Fleet service facilities
and low repair cost
design for long life • Lube trucks
• Displacement rods have minimal wear due to a proprietary Graco
• Double-acting pump ensures • Mining
manufacturing process
smooth fluid flow • In-plant
• Large air porting design provides efficient use of compressed air
• Fewer moving parts in the air
supply for continuous pump operation without icing
motor assembly means less
• Package includes pump, follower plate, drum cover and hose kit
downtime and low repair cost
Air Inlet: 1/2 in NPT(f)
Fluid Inlet: Slotted
Fluid Outlet: 3/8 in NPT(f)
Air Inlet: 3/8 in NPT(f) Max. Fluid Pressure: 7,500 psi
Fluid Inlet: Slotted Operating Pressure: 40 psi to100 psi
Operating Pressure: 30 psi to 140 psi
Fluid Medium: NLGI #1 Grease, NLGI #2 Grease Drum
Bare Pump
Pump Size
Fluid Item No. Mfr. No. Ratio (lb) Pump Included
Container Outlet 100333103 223108 50:1 120 205394
Flow Rate Volume NPT(f) 100333193 225781 50:1 400 205395
Item No. Mfr. No. Ratio (lb/min) (lb) (in) 100333507 244635 75:1 120 239729
100332899 206405* 15:1 0.70 35 1/4 100333508 244636a 75:1 400 239730
100332907 206699* 15:1 0.70 120 1/4
100332908 206700* 15:1 0.70 400 1/4 WARNING: This product can expose you to chemicals including lead, which
100333390 239877 50:1 1.19 35 1/4 are known to the State of California to cause cancer and birth defects. For more
100341362 239887 50:1 1.19 120 1/4 information, go to www.P65Warnings.ca.gov.
100333394 239888 50:1 1.19 400 1/4 Use 1/2” (12.7 mm) air regulator (104226) and gauge (100960); must be ordered
separately.
WARNING: This product can expose you to chemicals including lead, which a
Includes: 75:1 ratio Fire-Ball® pump (239730), hose and fitting kit (222076), drum cover
are known to the State of California to cause cancer and birth defects. For more (200326) and follower plate (223846).
information, go to www.P65Warnings.ca.gov.
Packages
Include: Pump, follower plate, drum cover, grease valve, z-swivel and hose kit
Fluid
Container Outlet
Flow Rate Volume NPT(f) Fluid Hose Pump
Item No. Mfr. No. Ratio (lb/min) (lb) (in) (in x ft) Included
100333068 222078* 15:1 1.19 35 1/4 1/4 x 15 206405
100333014 220170* 15:1 1.19 120 1/4 1/4 x 25 206699
100333015 220171* 15:1 1.19 400 1/4 1/4 x 25 206700
100341325 222069*,a 50:1 1.19 25 to 50 1/4 1/4 x 12 239877
100341331 225014*,a 50:1 1.19 120 1/4 1/4 x 6 239887 LD Series™ 50:1 Grease Pump Package
100333182 225016*,a 50:1 1.19 400 1/4 1/4 x 6 239888
WARNING: This product can expose you to chemicals including lead, which
are known to the State of California to cause cancer and birth defects. For more Features:
information, go to www.P65Warnings.ca.gov. • 3” air motor provides more power for a better flow
a
Use 3/8 in (9.5 mm) air regulator (109075); must be ordered separately. • Patented cup and plate design eliminates the need for o-rings
that wear faster for a more durable, long-lasting solution
Register With Us
• Modular air valves are easy to configure for hassle-free
installation
• Patented self-cleaning design increases reliability and
minimizes pressure drop with rapid changeover for reduced
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 133
Lubrication Products & Equipment
Thunder Series 50:1 Air-Operated
LD Series™ Oil Pump Grease Pumps and Packages
Dispenses grease directly from original containers to industrial or mobile machinery.
Features:
Features: • High pressure “booster” control handle
• 3” air motor provides more power for a better flow dispenses at line pressure during
• Patented cup and plate design eliminates the need for normal lubrication
o-rings that wear out faster for a more durable, longer • Extra squeeze of the trigger delivers up to
lasting solution 10,000 psi to break loose tough fittings
• Modular air valves are easy to configure for • Stall-free operation
hassle-free installation • Drum cover to keep lubricant clean
• Includes bung adapter (24F918) • Follower plate maintains pump prime
• Flexible material hose
• Adapter
Air Inlet: 1/4 in NPT(F) • Z-swivel
Fluid Inlet: 1 in NPT(F) LP3003-1 LP3001-1
Fluid Outlet: 1/2 in NPT(F)
Operating Pressure: 20 psi to 150 psi Fluid Inlet: Immersed
Air Inlet: 1/4 in
Max. Fluid Outlet: 3/8 in
Container Downtube Fluid Pressure Pump Type: Piston
Item No. Mfr. No. Ratio Volume Material (psi) Ratio: 50:1
100346512 24G576 3:1 Universal N/A 450 Stroke Length: 3 in
100346515 24G579 3:1 Cut-to-Length PVC 450 Fluid Medium: NLGI #1 Grease, NLGI #2 Grease
100346518 24G582 3:1 55 gal Steel 450
100346521 24G585 3:1 275 gal Steel 450 Container Flow
100346524 24G588 5:1 Universal N/A 750 Volume Rate
100346527 24G591 5:1 Cut-to-Length PVC 750 Components (lb) (lb/min) Item No. Mfr. No.
100346530 24G594 5:1 55 gal Steel 750 2 101840296 LM2250E-21-B
35
100346533 24G597 5:1 275 gal Steel 750 4 101570682 LM2350E-21-B
Pump Only 2 101839158 LM2250E-31-B
WARNING: Cancer - www.P65Warnings.ca.gov. 120
4 101759211 LM2350E-31-B
400 4 101759904 LM2350E-41-B
Pump, Meter, Drum Cover, Hose 400 4 101741413 LP3005-1a
Pump, Control Handle,
Dolly, Drum Cover, Hose, 120 4 101743724 LP3003-1
Follower Plate, Adapter, Z-Swivel
Industrial Air-Operated Oil Pump, Control Handle,
Drum Cover,
Pump (Heavy Duty) Hose, Follower Plate,
120 2 101791835 LP2004-1-B
Adapter, Z-Swivel
Used with motor and gear oil and transmission fluid. Grease Gun, Pump, 2 101792227 LP2002-1-B
Control Handle, Drum Cover,
Features: 35
Hose, Follower Plate, 4 101451206 LP3001-1
• Carbon steel piston pump Adapter, Z-Swivel
• Air motor design Container Volume: 55 gal
• Pump comes ready with bung adapter Ratio: 1:1 ARO® is a world-leading brand of Ingersoll Rand.
and can be switched in and out of drums Fluid Inlet: Immersed a
Does not include booster control handle or follower plate.
quickly and easily Fluid Outlet: 3/4
Air Inlet: 1/4
Pump Type: Piston Pump
Stroke Length: 6 in Thunder Series 3:1 and 5:1 Air-Operated
Fluid Medium: Oil
Oil Pumps and Packages
Flow Dispenses grease directly from original containers to industrial or
Item No. Mfr. No. (gpm)
mobile machinery.
101762148 612041-3a 9
101742087 612041-1b 9
Features:
ARO® is a world-leading brand of Ingersoll Rand. • Stall-free operation
a
Teflon® packings.
b
BUNA packings. • Drum cover to keep lubricant clean
• Flexible material hose Fluid Inlet: 1 1/2 in
Fluid Outlet: 1/2 in
Air Inlet: 1/4
Stroke Length: 3 in
Prefer the Applied® Digital Catalog? Fluid Medium: Oil
134 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Thunder Series Follower Plate Piston Transfer Pump
Metal plate with elastomer edges that squeegees inside of drum as material is used.
Features:
• Buna-N wiper seal material
• 1 1/2” OD of pump tube to be fitted
• Use with Thunder 50:1 pump
Drum Size
Item No. Mfr. No. (lb)
101740130 640095-2-B 35
102218854 640165 120
101740129 640015-1 400 82230 84829
ARO® is a world-leading brand of Ingersoll Rand.
Features:
• 2” bung bushing adjusts to drum lengths
• Stalls against lubricant pressure
Delivery Pump
Item No. Mfr. No. (gpm) Ratio
102083115 82230a 20 1:1
a
Hose sold separately.
Features:
Series 20 Air Operated • Adaptable for 16 or 55 gallon containers as well as bulk tank or
Bare Grease Pump standpipe installations
• Delivers 12.5 in³ per cycle
Features:
Delivery Pump
• Handles all grades of lubricants
Item No. Mfr. No. (gpm) Ratio
• Corrosion-resistant zinc head casting
• Springless air motor 102125142 84829 14 1:1
• 150 psi prelubricated air motor
• Pneumatically assisted air valve
• Shovel-type foot valve
• Hardened steel
• Uniform wall thickness
• Withstands constant high pressures
• Uniform delivery on both up and down strokes
• Patented muffler keeps noise levels below
OSHA standards
Air Inlet NPTF (f): 1/4 in Series 20 High Pressure
Drum Delivery Pump Stationary Grease Pump
Item No. Mfr. No. Size (lb) (in³/min) Ratio
102091699 82716a 25 to 50 80 50:1
102081062 82050 120 80 50:1
102083132 82054 400 80 50:1
a
For use with grease pump model no. 989.
918 926
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 135
Lubrication Products & Equipment
Features:
• All weather
• Resists rust
Pump
Item No. Mfr. No. Delivery Ratio
102085706 1292 0.303 oz/stroke 1:1
Features:
• Dispenses 45 oz of NLGI #0 to #2 grease per minute at 150 psig Does not include container.
• Red finish drum cover, black finish base, white finish air motor cover
• Ensures positive prime at lowest temperature
• Springless air motor construction
• Micro-lapped hardened steel air valve and seat Filler Pump
• Abrasive-resistant nitride steel plunger and bushing
• Shovel-type foot valve
• Rust-proofed cover Clamps on any 25 to 50 lb refinery container.
• High pressure delivery on top and down strokes
• 100% electronically tested
• Handles all grades of lubricants
• Internal muffler keeps noise below OSHA standards
Features:
• Clamps to any 25 to 50 lb refinery container Hand Operated Medium Pressure Fluid Pump
• Rust-proof, red-finished steel cover with three thumb screws
• Carrying handle provides easy portability
• Follower plate ensures positive prime at lowest temperatures For fluid gear lubricants. Attaches directly onto original containers.
• Springless air motor construction
• Micro-lapped hardened steel air valve and seat
• Abrasive-resistant nitride steel plunger and bushing
• Shovel-type foot valve Applications:
• Rust-proofed cover • Farm
• High pressure delivery on top and down strokes • Construction
• 100% electronically tested • Industry use
• Handles all grades of lubricants
• Internal muffler keeps noise below OSHA standards
136 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Features: Features:
• Steel piston with brass piston rings ensures long life • Easy-to-read LCD screen with simple
and durability operator control
• Neoprene seals resist wear and abrasive fluids • Legacy valve compatible with petroleum and
• Zinc-plated pump and spout retard rust and corrosion synthetic-based oils (motor, gear and ATF),
• Curved discharge spout with garden hose threads allow anti-freeze and gear lube
for convenient hose extension • Long battery life with replaceable AAA
batteries
• Five-year warranty; see manufacturer’s
website for details
EM8 EM20
Applications:
Capacity Delivery • Automotive dealerships
Item No. Mfr. No. (gal) (gal/rev) • Service and fast lube centers
102084305 G402 16 to 55 7.5/100 • Lube trucks
• Mining
• Heavy-duty dealerships
• Fleet service facilities
• In-plant
Features:
Heavy-Duty Lever Action Fluid Pump • All control valves come standard with a rigid
or flexible fluid extension
• Lock-on/lock-off trigger allows
hands-free operation
Close-tolerance pump developed to survive the harsh conditions encountered in • Sturdy cast body designed for use in tough
today’s maintenance environments. environments
• Inlet 1/2” NPT with swivel
Features: • Typical fluids handled include petroleum and
• Brass seals never shrink nor harden over time synthetic-based oils (motor, gear and ATF)
• Multi-position handle design allows easy adjustment when SDV15 XDV20 and anti-freeze
moving from light to heavy viscous fluids
• Telescoping pick-up tube for 16 to 55 gallon drums with Applications:
standard 2” bung openings • High flow, non-metered oil dispense
• Internal check valve ensures constant prime • Automotive dealerships
• Bung opening tool built into pump head • Heavy-duty dealerships
• Full serviceability • Fast lube centers
• Full 6 1/4” stroke length provides 8.5 fl oz displacement • Fleet service facilities
• Pump head includes hanger for hose • In-plant
• Lube trucks
Applications: • Mining Inlet Port: 1/2 in NPTF
• Noncorrosive fluids
• Motor oil SDV15 Series XDV20 Series
• Transmission fluid
3/4-16 Straight Thread O-Ring Boss 7/8-14 Straight Thread O-Ring
• Gear oil
• Engine coolant Flow: 15 gpm Flow: 20 gpm
Extension Item No. Mfr. No. Item No. Mfr. No.
Capacity Delivery Flexible 100333991 247713 100341403 247721
Item No. Mfr. No. (gal) (fl oz/stroke) Rigid 100333990 247712 100341402 247718
101991090 1335 16 to 55 8.5 WARNING: Cancer - www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 137
Lubrication Products & Equipment
Oil Sampling Port Adapter Oil Sampling Accessories
Features:
• Sample port adapter screws onto the
sample port so oil samples can be drawn
from the system
• Sample directly from lubricating oil while
equipment is running
• Ideal for use with Trico sample port, pitot
tube or liquid level gauge sample ports
Vacuum Pump Tubing Sample Bottle
Cap Thread: M16x2 (f)
138 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Will accommodate any standard 14 oz grease cartridge. Filler nipple included for
three-way loading; bulk, filler pump or cartridge. Features include electrostatic,
Accessories corrosion-resistant finish, nonslip knurling for better grip and a rubber handgrip for
Mfr. No. Desc. comfort. Steel block head offers protection for hardened steel plunger. Heavy-duty
54269 Rigid Ext. Kit steel barrel ensures durability. Posi-lock follower rod with T-handle provides
sure-handed grip and easy filling at any position.
Working
Pressure Features:
Item No. Mfr. No. Capacity (psi) • Jam-proof toggle
100875091 555a 16 oz 7,500 • Precision fit and hardened plunger
100875092 555-Eb 16 oz 7,500 • Rugged, cast iron pump head
100872769 500a 16 oz Bulk or 14 oz Cartridge 10,000 • Locking follower rod
100874657 500-Eb 16 oz Bulk or 14.5 oz Cartridge 10,000 • Exclusive flip-over follower
• Extra heavy follower springs
Rigid extension, coupler, loader fitting.
a
• Accessible check valve
18” hose, coupler, loader fitting.
b
• Spacer prevents pinching
• Coated steel barrel
• Variable stroke and pressure
• Replace damaged whip hose with 4,500 psi
Extra Heavy-Duty Grease Gun rated hose
• Do not hold whip hose while pumping
For pressure gun lubricants. Features:
Volume
• Three-way loading: cartridge, suction fill or bulk
Capacity
• Equipped with loader fitting Item No. Mfr. No. (oz)
• Gun outlet: 1/8” NPTF(f)
102085628 1142a 16
Accessories 102084861 1147b 16
Mfr. No. Desc. 102091672 1148c 16
102072796 1151a 21
393500 Repair kit
6” extension and hydraulic coupler.
a
Working With 18” whip hose and coupler; flip-over follower set for cartridge use.
b
Accessories
Mfr. No. Desc.
393500 Repair kit
Features:
• Three-way loading
• Jam-proof
• High pressure
• Includes a 6” extension and hydraulic coupler
• Fluid lubrication of bearings
• Hydraulic movement of slides in machinery
• Lubrication in tap and die use
• Precharging of hydraulic cylinders and volume filling of fluid reservoirs
Working Pressure
Item No. Mfr. No. (psi)
100874636 4035 1,800
Working Pressure
Item No. Mfr. No. (psi) Find Solutions
100874703 6679-J3 5,000
100874688 6243-J3 10,000
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 139
Lubrication Products & Equipment
Heavy-Duty Lever Type Super Heavy-Duty Pistol Grip
Grease Gun w/ Clear Tube Grease Gun w/ Clear Tube
Features:
• Allows for quick grease identification,
eliminating the risk of mixing incompatible
1142CLR 1148CLR
or unspecified greases
• High strength clear tube and aircraft aluminum
Features: adapters
• Allows for quick grease identification, eliminating the risk of mixing incompatible or • Durable tube assembly
unspecified greases • Impervious to damage from other tools
• High strength clear tube and aircraft aluminum adapters • Resilient shell eliminates waste from grease bypass
• Durable tube assembly • Allows for visual confirmation of quantity of grease
• Impervious to damage from other tools remaining in tube and air pockets
• Resilient shell eliminates waste from grease bypass
• Allows for visual confirmation of quantity of grease remaining in tube and air pockets
Working Pressure
Item No. Mfr. No. Extension Item No. Mfr. No. Extension (psi)
102074946 1142CLR 6 in Rigid Tube w/ Coupler 18 in Flexible Hose w/ Coupler
102080108 1134CLR 7,500
6 in Rigid Tube
Features:
• Jam-proof toggle
• Precision fit and hardened plunger
• Rugged, cast iron pump head
• Exclusive flip-over follower
• Extra heavy follower springs
• Accessible check valve
• Coated steel barrel
• Allows for 100% positive grease-type identification, eliminating the risk of mixing
incompatible or unspecified grease
• Provides visual confirmation of grease quantity, separation and air pockets Super Heavy-Duty Pistol
• Capable of both cartridge and bulk fill use Grip Grease Gun
• Replace damaged whip hose with 4,500 psi rated hose
• Do not hold whip hose while pumping Cast aluminum head and enclosed piston assembly work together to produce
Item No. Mfr. No. Extension a grease gun that withstands the abuse of even the harshest lubrication
102080491 1148CLR 6 in Rigid Tube w/ Coupler environments.
Features:
• Extra heavy-duty, pistol-grip grease gun
• Cast head design
• Jam-proof handle return mechanism
Heavy-Duty Pistol Grip Grease Gun • Variable stroke/pressure design
• Extra heavy follower spring ensures positive priming and
uninterrupted pumping action
• Three-way loading: cartridge, suction or bulk
• Filler nipple/bleeder valve combination
Pressure
Item No. Mfr. No. Includes Item No. Mfr. No. Extension (psi)
102084373 1132 6 in extension 18 in Flexible Hose w/ Coupler &
111458204 1134 7,500
6 in Rigid Tube
102107979 1133 18 in whip hose
140 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
For draining and refilling brake master cylinders, oil filters, differentials and gear cases. Features:
• Long-run, high-capacity 3000 mAh battery
Includes: • Capable of accepting more than 1,500 charges
• 323821 flexible plastic extension • Does not suffer from “memory effect”
• Use with Lincoln 18 V Lithium-Ion PowerLuber
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 141
Lubrication Products & Equipment
Features:
• Compact and lightweight means more control,
less fatigue and superior balance
Features:
• Charge level maintained over extended periods
• Use with model numbers 596-A, 596-B, 596-C
• Software controlled, no fade output
and 596-D
• Easy slide-on attachment
• Three times the charging capability of NiCd
Item No. Mfr. No. • Environmentally responsible option
• For use with models 1882 and 1884
111065414 343291 PowerLuber® guns
Item No. Mfr. No.
110776235 1871
Features:
• LED indicates charge status, hot/cold battery
and battery replacement needed
Features: • Protects battery cells from damage
• Use with model numbers 596-A, 596-B, 596-C • Switches off automatically to prevent over
and 596-D charging
• Charges without creating memory effect
• Lithium-Ion battery provides longer run time
(more tubes of grease per charge per fully
Item No. Mfr. No. charged battery)
• For use with model 1871 battery
100875075 340338
Item No. Mfr. No.
111153164 1870
Features:
• Stable three-point stance keeps the tool upright and within reach Features:
• Electronically controlled two-speed motor • High strength, transparent tube assembly
• Balanced, lightweight design • Provides positive grease type identification (with cartridges)
• LCD identifies empty cartridge, loss of prime, grease output and • Provides visibility to remaining grease in tube (bulk)
blocked fitting • Provides visibility to air pockets (bulk)
• Built-in LED illuminates dimly lit areas • Provides visibility to grease separation or contamination (bulk)
• Flow meter prevents over lubrication and wasted grease • Eliminates risk of mixing incompatible greases
• Military proven
Pressure: 10,000 psi Capacity: 14.5 oz Cartridge & 16 oz Bulk
Voltage: 20 V O.D.: 2.7 in
Cartridge Size: 14.5 oz Overall Length: 10.7 in
Item No. Mfr. No. No. of Batteries Item No. Mfr. No. Use With
110993736 1882 1 102080493 1100CLR For all Lincoln Grease Guns except Model 1134
110993737 1884 2 102121543 1107CLR For Lincoln Grease Gun 1134 and many Competitive Brands
142 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Delivers preset, measured shots with trigger partially depressed. Provides Push-type nozzle for grease gun.
continuous flow with trigger fully depressed.
Features:
• Durable
• Built to last
Applications:
• Preset measured shots
• Continuous flow
Includes: Item No. Mfr. No.
• 6 1/2” hydraulic extension 49136 100875040 Z334
• Hydraulic coupler 6304-B
Inlet NPTF(f) Outlet NPTF(f)
Item No. Mfr. No. (in) (in)
100874159 6320-3 1/4 1/8
Grease Gun Hose Assembly
Length
Item No. Mfr. No. (in)
Item No. Mfr. No. 102083100 5812 12
102080110 58000 102082673 5818 18
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 143
Lubrication Products & Equipment
Thermoplastic
Working
Pressure Length Applications:
Item No. Mfr. No. (psi) (in) • Use to adapt a threaded fitting to a different sized opening thread
100875005 B337595-A1a 6,000 12
100875006 B337595-B1a 6,000 18
a
Blister pack.
144 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
For grease guns with 1/8” NPTF port in head. Provides quick, positive connections with hydraulic fittings.
Features: Threads: 1/8 in NPT(f)
• Medium ball check passage
• One-piece construction Coupler
• Light and medium lubricants Item No. Mfr. No. Type
100872781 308730 Narrow Hydraulic
Item No. Mfr. No. 100874336 308730-Aa Narrow Hydraulic
100874993 B306740 100875000 B330070b Narrow Hydraulic
100874158 6304-B Standard Hydraulic
Features: 100874694 6304-Ca Standard Hydraulic
• Large ball check passage
• Two-piece construction
a
Built-in check valve.
• Heavy lubricants
b
Built-in check valve. High pressure. Metal seal.
Hydraulic Coupler
Features:
Loader Coupler • For all hydraulic-type grease fittings
• Small O.D. permits easy contact with
recessed fittings
For installation on loader pumps. Used in conjunction with loader fittings. • Replaceable, hardened steel jaws
• Built-in ball check prevents leak and
lubricant backup
Thread Type: NPT
Pressure
Item No. Mfr. No. (psi)
102125128 5852 6,000
102090883 5845a 7,500
a
Same as 5852 except 1/8” larger outside diameter.
Coupler Threads
Item No. Mfr. No. Type (in)
100874330 306741 Loader Coupler 3/8 NPTF
Features:
• Provides access to difficult-to-reach fittings
• Allows for lubrication in tight areas
Length Threads
Item No. Mfr. No. (in) (in)
100874160 6509-Da 3 1/2 1/8
Item No. Mfr. No. Feature 100874162 6509-Eb 4 1/8
101991719 5883 90° grease coupler a
Narrow diameter rubber seal.
b
Standard with metal.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 145
Lubrication Products & Equipment
For handling grease control valves. Prevents damage to hose from twisting.
Features:
• Swivels are suitable for use with lubricants only
• Do not use with corrosive or abrasive materials
Threads Straight
Item No. Mfr. No. (in)
102083853 83722 1/4-28; 1/8 O.D. Tube Max.
Pressure Thread Size
102091204 91048 1/8 NPT(f); 1/8 NPT(m) Item No. Mfr. No. (psi) (in)
102084171 81606a 4,500 1/8 NPT(f) x 1/8 NPT(m)
102107969 82399 7,500 1/4 NPT(m) x 1/2-27 Taper(m)
Grease Pump Swivel a
Whip hose only.
Universal
Permits easy handling of control valves and prevents damage to hose from twisting.
Max.
Pressure Thread Size
Item No. Mfr. No. (psi) (in)
102085299 81387 7,500 1/4 NPT(m) x 1/2-27 Taper(m)
102081257 83594 7,500 1/4 NPT(m)
Features:
• Steel construction
Straight Z-Type
Needle Nozzle
Straight
Max. For contacting hard-to-reach and flush type fittings.
Pressure Thread Size
Item No. Mfr. No. (psi) (in)
100992469 301980a 4,800 1/8 NPTF(m)
100874672 54730 10,000 1/8 NPTF
100874997 B321320 10,000 1/4 NPTF
Length
a
For use with hand-operated grease guns only. Item No. Mfr. No. (in)
102089963 5803a 1 3/4
Z-Type
102084105 82784b 6
Max. a
1/8” female NPT inlet size.
Pressure Thread Size b
Includes needle nozzle and locking sleeve.
Item No. Mfr. No. (psi) (in)
100875012 B52752 10,000 1/2 UNS x 1/4 NPTF
100875002 B331107 10,000 1/4 NPTF
Features: Applications: Angle adapter specially made for working in tight areas.
• Contact nozzle • Universal joints Applications:
• Locking sleeve • Tight spots • Compact and K-cars
Overall Length
Item No. Mfr. No. (in) Item No. Mfr. No.
100874166 B6783 5 100875013 B6238
146 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Filler Nipple
Impact Fitting Cleaner
Enables hand guns to be loaded by filler pump.
Features: Features:
• Includes ball check • Clears hardened grease from fittings and joints
so the proper lubricant can be applied
• Forces light oil into clogged fittings and joints
• Saves time by eliminating the need to
Thread Size disassemble joints or replace fittings
Item No. Mfr. No. (in)
102084389 91108 1/8 NPT
Applications:
• For feed lines ® ®
90 Piece Grease Fitting Assortment
Set Contents for 12945
Size Qty.
Features: Grease Fitting Assortment
• Tube to male thread
• Brass with brass nut Fitting Type: 90° 1/8 in NPT – Straight 30
1/8 in NPT – 45° 5
Tube Size 1/8 in NPT – 90° 5
Item No. Mfr. No. (in) Threaded End Size 1/4-28 in – Straight 30
102091491 66414 1/8 1/8 in NPT 1/4-28 in – 45° 10
102084081 66716 1/8 1/4-28 1/4-28 in – 90° 10
Features:
Features: • Push-type, plated fittings permit lubricant to flow while built-in ball, under spring
• Tube to male thread pressure, prevents dirt from entering
• Carbon steel with brass nut Fitting Type: Straight • SAE J-534
Tube Size Material: Zinc Plated Alloy Steel
Item No. Mfr. No. (in) Threaded End Size
102090222 66415 1/8 1/8 in NPT Item No. Mfr. No.
102090250 66714 1/8 1/4-28 101474471 12945
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 147
Lubrication Products & Equipment
Box contains six types of popular fittings. An identifying chart is included in the cover. Box contains six types of popular metric fittings. An identifying chart is included
in the cover.
Set Contents for 2365-1
Set Contents for 2371
Mfr. No. Desc. Qty.
1/8 in PTF Fittings Mfr. No. Desc. Qty.
1610-BL Straight 12 6 mm Thread Metric Fittings
1688-B 45° 6 2106 Straight 10
1613-B 90° 6 2107 45º 6
1/4 in - 28 Taper Fittings 2108 90º 6
1641-B Straight 12 8 mm Thread Metric Fittings
1637-B1 45° 6 2103 Straight 6
1911-B1 90° 6 2105 90º 6
Accessories Features: 10 mm Thread Metric Fittings
- Plastic Box 1 • German Standard DIN 71412 2109 Straight 10
148 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Thread forming fittings have special tapered drive threads to reshape the material in
an untapped hole. Effectively installed by spinning into the untapped hole, but may
also be driven straight into the untapped hole.
Features:
• Leakproof seal
• Maximum pressure 10,000 psi
• May be replaced by any standard
thread fitting
Pkg. Qty.: 10 • 273321 GM compliant
• 9411022 GM/CH compliant
Thread • 273323 GM compliant
Size • 9411024 GM/CH compliant
Item No. Mfr. No. (in) Type/Angle • 273324 GM compliant
45° Straight
102089961 5190 1/8 NPT Straight
• 9411025 GM/CH compliant
Applications:
Features: • Cars
• Dirt excluding ball check • Trucks Thread
• Maximum pressure 10,000 psi • Industrial machines Item No. Mfr. No. Size Type/Angle
Overall 100874140 1792-B 1/4-28 UNF-2A Straight
Thread Length
Item No. Mfr. No. Size Type/Angle (in)
100874123 1637-B1 1/4-28 Taper 45° 13/16
100874144 1911-B1 1/4-28 Taper 90° 3/4
100874125 1641-B 1/4-28 Taper Straight 35/64 Special Thread Fitting
100874128 1652-B 1/4-28 Taper Straight 11/16
100874130 1680-B 1/4-28 Taper Straight 31/32
Special threads and sizes for specialized lubrication.
Applications:
• Farm machinery
• Heavy industrial equipment
Overall
Thread Length Thread
Item No. Mfr. No. Size Type/Angle (in) Item No. Mfr. No. Size Type/Angle
100874121 1629-B 1/4 PTF 67 1/2° 31/32 100874317 3016 #10-32 Straight
100874120 1627-B 1/4 PTF Straight 7/8 100874134 1711-B 5/16-24 Straight
100874122 1631-B 5/16-32 Straight
Applications:
• Industrial machines
• Heavy equipment
Overall
Thread Length
Item No. Mfr. No. Size Type/Angle (in)
100874131 1688-B 1/8 PTF 45° 57/64
100874116 1612-B 1/8 PTF 65° 27/32
100874119 1623-B 1/8 PTF 65° 1 7/32
100874117 1613-B 1/8 PTF 90° 27/32
100874126 1644-B 1/8 PTF Straight 9/16
100874114 1610-BL 1/8 PTF Straight 11/16
100874112 1607-B 1/8 PTF Straight 1 1/4
100874129 1669-B 1/8 PTF Straight 1 3/4 Search Shop Find
Products Trusted Brands Solutions
Features:
• Used on many industrial machines and heavy equipment, including trucks and cars
• Features ball check to exclude dirt
• Maximum pressure 10,000 psi
• For heavy lubricants in cold weather
Overall
Thread Length
Item No. Mfr. No. Size Type/Angle (in)
100874316 3010-B1 1/4-28 Taper 65° 25/32
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 149
Lubrication Products & Equipment
67 1/2°
Overall
Thread Length Button Head Fitting
Item No. Mfr. No. Size (in)
100874294 1922-Sa 1/8 PTF 61/64
90°
Features:
Overall • Precision-machined
Thread Length • Case hardened
Item No. Mfr. No. Size (in) • Smooth face prevents leakage
100874306 1969-Sa 1/4-28 Taper Metric 3/4 • Long guide stem ensures positive closing
100874296 1923-Sa 1/8 PTF 7/8
Drive Fitting
Features:
• 110161 GM compliant
• 109358 GM compliant Coupler Thread Size: 1/8 NPTF Thread Size: 7/16-27 NS-2
• 271428 GM compliant Type Item No. Mfr. No. Item No. Mfr. No.
• 271432 GM compliant Standard Push-On 100872773 42031-A — —
Standard Pull-On 100872774 42030-A 100874640 42030
65° Straight Giant Pull-On 100872780 304300-A 100874322 304300
65°
Drill Dia. Overall Length
Item No. Mfr. No. (in) (in)
100874127 1646-B1a 3/16 45/64 Pressure Relief Fitting
Straight
Drill Dia. Overall Length Use wherever control of oil or grease pressure is required.
Item No. Mfr. No. (in) (in)
100874319 3019b 1/8 15/32 Features:
100874137 1736-Ab 1/8 9/16 • Releases pressure buildup
100874313 3006a 3/16 31/64 • Twin vent ports provide visual indication
• Internal operating parts
100874136 1728-Ba 3/16 33/64
• Ball checks located at the base of valve body
100874269 1633a 3/16 5/8
• Not recommended to be used below the fluid level
100874139 1743-Ba 1/4 35/64
100874113 1608-Ba 5/16 35/64
Relief Pressure
a
Used extensively to avoid tapping costs in a wide variety of applications. Item No. Mfr. No. (psi)
Recommended for low and medium pressures only.
b
For damaged fittings replacement. Medium and low pressure applications. 102091863 5677 1 to 5
Serrated shank for gripping and no tapping costs. 102092444 5678 7 1/2 to 15
150 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Giant button head fittings withstand roughest usage. For use where excessive lubricant pressures are not desirable. These safety valves
open at a predetermined pressure.
Features:
Features: • Fittings are 1/8” PTF SAE special short threads
• Dirt excluding plunger check valve
• 7/8” button head Applications:
• Maximum pressure 15,000 psi • Gearbox housings
• Moving and sliding parts
• King pins
• Universal joints
Thread Size
Item No. Mfr. No. (in)
100874143 1823-1 1/4 NPTF Relief Pressure
100874142 1822-A1 3/8 NPTF Item No. Mfr. No. (psi)
100874287 1820-1 1/2 NPTF 100872790 317400 1/4 to 1
100874182 47200 1 to 5
100874655 47640 7 1/2 to 15
100874449 323060 15 to 25
Hose/Tube Button Head Coupler
Features:
• Maximum operating pressure 4,000 psi Features:
• Sits flush
Slotted
Thread Size Overall Length Dia.
Item No. Mfr. No. (in) (in) (in)
100874141 1815 1/8 NPTF 23/64 13/32
Pin Type Fitting 100874266 1452 1/8 NPTF 17/32 —
100875041 Z741-A 1/4 NPTF 9/16 35/64
High pressure. Locking action coupler and cross pins. Leakproof seal. Straight
Overall Length Dia. Drill Dia.
Item No. Mfr. No. (in) (in) (in)
Features:
• Positive locking of adjustment settings 100874290 1885 9/32 5/16 1/4
• Leakproof connection 100874286 1814 21/64 3/8 5/16
• SAE specs. short 100874320 3036 3/8 1/4 3/16
Type/Angle: Straight
Packaged Hydraulic Fitting
Thread Size
Item No. Mfr. No. (in) Body Material
Packaged fittings for display.
100872767 A336 1/8 PTF Carbon Steel
100875034 M336 1/8 PTF Brass
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 151
Lubrication Products & Equipment
Leakproof Fitting
Features:
• Dirt excluding ball check
• Maximum pressure 10,000 psi
Applications:
• Cars
• Trucks Straight 30° 90°
• Industrial machines
• Heavy equipment
Features: Applications:
Thread Shank Length • Buna-N seal • Light oils
Item No. Mfr. No. Size Type/Angle (in) Thread Size Pressure
100874115 1611-Ba 1/8 PTF 30° 19/64 Item No. Mfr. No. (in) Type/Angle (psi)
100874111 1606-B 1/8 PTF 90° 1 1/4 100874274 1650 1/8 PTF Straight 5,000
100874277 1684-B 1/8 PTF Straight 2 3/16 100874278 1692 1/8 PTF 30° 5,000
100874118 1618-B 1/8 NPTF Straight 9/32 100874132 1693 1/8 NPT 90° 5,000
100874133 1698-B 1/4 Taper Straight 25/32
100874155 3014-Bb 1/4 Taper Straight 1
a
29/32” overall length. Features: Applications:
b
Recommended assembly into 1/4-28 UNF, Class 3B, straight threaded holes having • Steel ball checks • Grease
modified maximum minor diameter of 0.2152” to ensure 75% minimum thread height. • Brass insert seats • Heavy and medium oils
Thread Size Pressure
Item No. Mfr. No. (in) Type/Angle (psi)
100874270 1634 1/8 PTF Straight 5,000
At Applied Industrial Technologies, we are 100874271 1634-B 1/8 PTF Straight 10,000
152 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Features:
• Mix and match lids and drums to get the right
lubricant transfer container for the job
• Integrate OilSafe products to manage your fluid
transfer from bulk storage to point of use
• The Visual Lubrication System™ of products
identifies and protects industrial fluids to reduce
machinery downtime
• Fully graduated in both metric and imperial to assist
with measuring fluid volumes
• Tough and comfortable to handle, these drums Features:
come in different sizes and fully seal when fitted to • Plug and strap ensure that the stretch spout hose extension is well protected from
any genuine OilSafe lid contaminants when not in use
• Attaches to the OilSafe stretch spout lid, making awkward or hard-to-reach fill
• The drums have an extra wide neck opening (4.7”/120 mm) for rapid pouring and points easy and fast to access and service
easy cleaning • The addition of the stretch spout hose extension to the outlet spout of the stretch
• Made of industrial-grade material that withstands the toughest working conditions, spout lid also eliminates the need for funnels, which are notorious for
the drums are designed to last and are available in 1.5, 2, 3, 5 or 10 liter/US quart attracting contaminants
• Made of heat-resistant materials with UV and anti-static additives • Hose can be removed from the fittings and the length cut to suit the application
• Ultra-durable construction
• Will not warp, leak, bend or break
• All lids fit all genuine OilSafe drums from 1.5 through to 10 liter/US quart
• Lids sold separately
Capacity
Item No. Mfr. No. (L)
110032389 101001 1.5
110032390 101002 2
110032391 101003 3 Length Hose
110032392 101005 5 Item No. Mfr. No. (in) Type
110032393 101010 10 110032395 102020 12 Flexible
Lids
Ideal for engine and gear oils and when a high lubricant flow is
Features: required. The 1" spout opening on the Oil Safe Stumpy Spout Lid
• Other colors available: Beige-00, Black-01, Blue-02, Dark Green-03, Gray-04, Mid 100509 is the largest of the Oil Safe spout lids. Its design is ideal for
Green-05, Orange-06, Purple-07, Red-08 and Yellow-09 depicted in images Stumpy Spout Lid applications where a higher lubricant flow is required, such as
engine oils and gear oils. Add a Stumpy Spout Hose Extension
to help with awkward or hard-to-reach fill points.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 153
Lubrication Products & Equipment
Features:
• General-purpose pump will handle up to ISO 460 fluids
• This high quality down-stroke discharge pump is perfect
for quickly and easily accessing hard-to-reach and
time-consuming top off points, such as gearbox and
transmission applications
• Supplied with a removable discharge hose for easy
cleaning and drainage, the pump delivers 1 liter for
approximately 12 strokes
• Match with an OilSafe utility lid and a 3, 5 or 10 liter/US
quart OilSafe drum
• Supplied with 5 ft removable discharge hose with a hook
outlet nozzle
• The anti-drip nozzle is made of aluminum and fits 1/2”
Features: and larger fill holes
• The drum label kit is designed to accompany your color-coded OilSafe lid, drum • For smaller fill hole applications add a pump reducer
and label, offering onsite evaluation of the OilSafe unique visual lubricant nozzle accessory to the outlet nozzle
labeling system
• Each kit includes a color-coded comprehensive selection of the products that Item No. Mfr. No. Pump Type Delivery
work in conjunction with your color-coded OilSafe lid, drum and label 110032394 102000 Hand Operated 1 L/12 strokes
• Five label holder components: (1) 2” x 3.5” label pocket, (1) color-coded label
pocket frame, (1) lockable drum ring, (1) label leash, (1) color-coded drum ring
• These components combine to create two pre-configured solutions for different
labeling requirements and experimentation
• Guidance sheets – best practice suggestions for common labeling applications
Premium Pump
• Experience the versatility with multiple options for most situations
• Experience the durability of OilSafe’s heavy-duty industrial grade components Features:
• Other colors available: Beige, black, blue, dark green, gray, • Will handle up to ISO 680 fluid
mid-green, orange, purple and red • Sharing the unmatched efficiency and reliability
Color: Yellow of the OilSafe standard pump, this heavy-duty
discharge pump is color-coded, has an ultra
Item No. Mfr. No. comfortable D handle grip design and has fully
110416134 207109 serviceable internals for maximum life
• Supplied standard with a 5 ft anti-drip outlet
discharge hose and color-coded body collar,
this pump can also be easily converted for quick
connect use
• Quick connects enable the container to be filled
Stumpy Spout Hose Extension through the pump body (without removing the lid)
and also enables attachment to machinery
fill points by quick connect via the pump
discharge hose
• Quick connect kits and replacement parts
are available
• Premium pump comes standard with Viton®
o-rings for oils where solvent content may
be higher
• Match with an OilSafe utility lid and a 3, 5 or
Features: 10 liter/US quart OilSafe drum
• Attaches to the OilSafe stumpy spout lid, making awkward or hard-to-reach fill • For smaller fill hole applications add a pump
points easy and fast to access and service reducer nozzle accessory to the outlet nozzle
• The addition of the stumpy spout hose extension to the outlet spout of the stumpy • Other colors available: Beige, black, blue, dark
spout lid also eliminates the need for funnels, which are notorious for green, gray, mid-green, orange, purple and red
attracting contaminants
• Hose can be removed from the fittings and the length cut to suit the application Color: Yellow
Color-Coded Clear
Replacement Tube
Pump Reducer Nozzle Features:
• Color-coded clear grease guns enable accurate identification of a
lubricant by providing visibility of the installed cartridge or the grease
level if bulk filled
• Made of impact-resistant polycarbonate, the clear body tubes are
extremely tough and durable and have been designed for many years
of use in industrial environments
• Available in 10 colors as spare parts for converting your existing
Features: grease guns
• Suits both OilSafe standard and premium pumps • Fits most common styles
• Fits to the aluminum anti-drip discharge pipe on the outlet end of the pump hose • Other colors available: Beige, black, blue, dark green, gray,
and reduces the outlet diameter down to approximately 1/4”, making oil top off to mid-green, orange, purple and red
very small fill points easy, simple, fast and clean Color: Clear/Yellow
154 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
OilSafe’s Advanced Bulk System is a best practice solution for storage and dispensing
of lubrication oils and glycol-based coolants in industrial facilities. Color-coded bulk Lustor™ Lubrication Storage System
storage keeps your storage area neat and safe. Modular and scalable, the unit can be
configured to your exact needs and arrives preassembled for easy setup. Each tank
has its own pump and filter to prevent cross-contamination. Colorized quick connects, Best-in-class lubrication programs depend on the methods applied for storing,
custom ID labels and auto-shut off tank isolation valves – included per tank. transferring and applying lubricants to your valuable equipment, and the first
step to help ensure clean oil enters your equipment is to filter it to an acceptable
level. Lustor™ systems deliver the storage and dispensing benefits you trust, in
cost-effective, compact and expandable units. Designed to protect every liter of oil
from on-site environmental conditions, Lustor™ systems combine proper storage,
Features: filtration and identification to create an efficient and organized, workflow. This, in
• Available in 10 different tank colors: Beige, black, turn, ensures that your lubricants remain dry and contaminant free before they
blue, dark green, gray, mid-green, orange, purple, enter your equipment, saving you time and money.
red and yellow
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 155
Lubrication Products & Equipment
Drum Pump Filtration System Spectrum® Oil Container
The Drum Pump Filtration System filters oil directly from a 55-gallon storage drum These robust and durable oil storage containers feature a wide opening for
to fill totes and transfer containers. Dispensing nozzle provides continuous flow and rapid no-spill filling and will fit any lid. The containers are semi-transparent with
metering of lubricants. System is capable of delivering a flow up to 7.25 gpm and is graduated markings along the side of container, making lubricant level easy to
rated for use with lubricants up to a viscosity of 5,500 SUS (1,250 cSt). With the use see. Each container comes with a writable “CONTENTS” label to provide easy
of the recirculation kit, oil can filtered as necessary with the enclosed set-up. identification of lubricant type.
Features:
• Drum Pump:
» Hand wheel modular design for easy
transfer of motor to other drum pump
filtration tube assemblies
» Clear, non-collapsible PVC hose for visual
confirmation of flow
» Differential filter gauges
» Rubber dust cap on nozzle
» Standard 10 micron absolute >200 spin-on filter Features:
» Pump tube capable of fitting containers up to 39” • Durable carry handle for ease of transporting
» Tube assembly 316 stainless steel • Front and back handles for easy pouring
» Sealing bung adapter • Handles contain contour finger grips to provide a comfortable and secure hold
• Recirculation Kit: • Contoured containers fit forearm to distribute weight of container
» Includes EX Series Desiccant Breather to allow • Semi-transparent container with English and metric graduation markings
55-gallon gallon drum to breathe while preventing • Contents label indicates product in container
moisture and particulate contamination • Compact footprint takes up less storage space
» Easy usage with quick connect fittings • Square design allows for stability when using hand pump
Tank
Item No. Mfr. No. Component Capacity Length Width Height
116403057 30035 Tube Assembly (Requires 30018 or 300019) Item No. Mfr. No. (gal) (in) (in) (in)
101637683 30018 Electric Pump Motor (Requires 30035) 113139271 34459 1 14 5 9
101664766 30019 Pneumatic Pump Motor (Requires 30035) 106412990 34460 2 15 6 1/4 10
113897034 30032 Drum Pump Recirculation Kit
106371409 34461 3 17 8 11
104069814 36972 Filter Media – 3 Micron Beta 200
101355807 36973 Filter Media – 10 Micron Beta 200 106339290 34462 4 18 1/4 9 12
104065160 36974 Filter Media – 20 Micron Beta 200
101355618 36975 Filter Media – 10 Micron Nominal Water
112081315 36995 Filter Media – 25 Micron Water
Nozzle Diameter
Item No. Mfr. No. Type (in)
106331899 34401 1/4” Nozzle Lid 0.25
106340248 34411 1/2” Nozzle Lid 0.5
106408687 34421 1” Nozzle Lid 1 We Are… All Things Industrial®
106306528 34431 Pump Storage Lid N/A
106395823 34463 Hand Pump 0.38 Learn more at Applied.com/about
106421530 24012 Breather Vent N/A
156 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Closed System Set-Up Kit Threaded Elbow Gravity Feed Oil Cup
Features:
• Extended equipment life
• Increased lubricant life
• Extended oil change intervals
• Decreased equipment maintenance Material: Steel, Zinc-Plated
• Increased savings in maintenance costs
Assembly Overall Overall
Includes: Clearance Length Height
• Closed system oiler with wire guard Item No. Mfr. No. Thread Size (in) (in) (in)
• EX desiccant breather 1/2” FNPT (39110) 101989627 01207 1/8-27 NPT 1 5/16 1 3/32 25/32
• 316 stainless steel fittings
101981745 00801 1/8-27 NPT 1 19/32 1 11/32 15/16
• Stainless braided flex line
101989624 00803 1/8-27 NPT 2 5/8 1 11/16 1 7/16
Item No. Mfr. No. Type 101989626 01202 1/4-32 UNEF 1 1/16 3/4 19/32
117195462 40409 16 oz Closed System Oiler 101981634 00807 3/8-18 NPT 4 2 13/32 2 1/16
117099238 40407 4 oz Closed System Oiler Additional sizes available.
113897035 40408 8 oz Closed System Oiler
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 157
Lubrication Products & Equipment
Opto-Matic® Constant Level Oiler Opto-Matic® Closed System Oiler
One-piece glass reservoir ensures automatic, visible constant level. For pump bearing The Opto-Matic® closed system oiler is designed for all types of equipment where a
housings, gearboxes and other oil sump applications. Surge chamber prevents constant level in a housing must be maintained. The closed system design prevents
overflow. Side and bottom connections. Level adjuster permits instant and accurate contamination and spillage. The adjustable collar allows the oil level to be externally
adjustment of oil level in oil sump. NPT connection 1/4”. adjusted to the desired level. A 1/8” NPT port is provided for a vent line back to the
housing to allow pressure balancing between the oiler and the housing.
Applications:
• Bearing housings Features:
• Gearboxes • One-piece glass reservoir ensures proper constant level function
• Chemical industry • Adjustable level setting allows use in many applications
• Pulp and paper • Bottom of adjusting collar indicates actual oil level setting for easy
• Mining setup and maintenance
• Side and bottom connections for simplified installation
• 2” sight gauge available for easy viewing of oil level
Features:
• Adjustable drip rates
Features: • Acrylic reservoir
• Use with Opto-Matic® Constant Level Oilers and • Three-position toggle switch
Closed System Oilers • Silver brazing of brass connections
• Use in all heavy-duty applications where a large oil capacity
is needed and an adjustable rate of oil is required
• Can be used with applicator brushes
Reservoir
Capacity
Item No. Mfr. No. Material (oz) For Use With Overall
100873082 30013 Zinc Plated 4 30003 or 30203 Thread Dia. Height
Item No. Mfr. No. Capacity Size (in) (in)
100872806 30016 Zinc Plated 8 30005 or 30205
100873085 30020a Zinc Plated 16 30010 or 30210 100873277 31416 1 pt 3/8-18 NPT 3 5/8 7 15/16
100872816 31417 1 pt 1/2-14 NPT 4 7/16 7 15/16
31804, 31808, 31818,
113139407 31832 316 Stainless Steel 4 100873278 31432 1 qt 1/2-14 NPT 4 7/16 9
31820 and 31821 100873279 31480 2.5 qt 1/2-14 NPT 5 11/16 11 13/16
a
Side and bottom connects. 100873280 31481 1 gal 1/2-14 NPT 5 11/16 16 11/16
158 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Stainless Steel
Capacity Stainless Steel Offset
(oz) Item No. Mfr. No. Item No. Mfr. No.
2 117578278 17-00477 117578277 17-00471 Round Brush Applicator Even-Flo® Applicator Ever-Last® Applicator
5 113139255 31390 117578280 15-00325
Features:
• Even oil distribution
• Thread type 1/8” NPT
• Round Brush and Even-Flo® Applicator temperature rating 160 °F
• Ever-Last® Applicator temperature rating 200 °F
Style 13000 Adjustable Metering • Applicator brushes can be used with gravity feed oilers
Valve Liquid Dispenser Type: Flat Brush
Bristle Material: Felt Plate w/ Neoprene Cover
Features:
• Modernized, attractive design and finish improve appearance Brush Overall
and corrosion resistance Width Height Bristle
• Oversized filler port makes filling easy and fast Item No. Mfr. No. (in) (in) Material Type
• Filters are available for these units 100873510 36039 5/8 2 5/16 Nylon Round
• Sight gauge in stem permits monitoring of oil drops per 100873511 36042 5/8 2 5/16 Stainless Steel Round
minute; must remain empty to function properly 100873512 36045 1 2 5/16 Nylon Round
• Toggle “on-off” indicator shows if valve is open or closed 100873513 36048 1 2 5/16 Stainless Steel Round
• Vibration-proof metering adjustment ensures stable settings 100873509 36033 1 1/4 2 5/16 Felt Plate w/ Neoprene Cover Ever-Last®
100872849 36036 2 2 5/16 Felt Plate w/ Neoprene Cover Ever-Last®
100873514 36051 2 2 5/16 Nylon Even-Flo®
Reservoir Thread Size Dia.
Item No. Mfr. No. Material Material (in) (in)
101478947 13044 Acrylic Aluminum Alloy 1/4-18 NPT 2 1/8
Style GB Ball Oiler
Flush type oilers with ball valve opening. Requires minimum top clearance. Easily
depressed ball valve (music wire spring) instantly closes when pressure is released.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 159
Lubrication Products & Equipment
BW-20 Liquid Level Gauge Liquid Level Gauge
Made in one-piece high quality die cast. Glass cylinder is gasketed both on top and
Features: bottom. Wide spring-hinged cover makes it suitable for use as an oil reservoir filler
• Clear window as well as a gauge.
• Reflector
• Steel
• Zinc-plated
• Maximum temperature 250 °F
• For insertion in tapped els, tees or other NPT fittings Features:
• Not for air service • Zinc die-cast
• Zinc-plated
Pressure Thread • Not for air service
Item No. Mfr. No. (psi) Size
101981757 04057 2.5 2-11 1/2 NPT
101351466 04055 10 1 1/4-11 1/2 NPT
101365847 04056 10 1 1/2-11 1/2 NPT
101351465 04054 25 1-11 1/2 NPT Overall Height Overall Length
100874105 04053 50 3/4-14 NPT Item No. Mfr. No. Thread Size (in) (in)
101351464 04052 75 1/2-14 NPT 101981648 04251 1/4-18 NPT 1 3/4 2 3/4
Features:
• Maximum conditions 10 psi to 100 °F, 2 psi to 160 °F
• Not for air service
Liquid Level Gauge
Material: Steel, Zinc-Plated The full length sight window provides easy viewing of a wide range of liquid levels.
Thread
Item No. Mfr. No. Size
110027750 04119 3/4-14 NPT
101351467 04120 1-11 1/2 NPT Features:
101351468 04121 1 1/4-11 1/2 NPT • Column view gauge
101982653 04122 1 1/2-11 1/2 NPT • One-piece aluminum
• Knurled screw-type vented cap
• Gold anodized finish
• Other sizes available
DW-40 Press-Fit Observa-Dome
Porthole Liquid Level Gauge
90° Straight
Style: 90°
Features: Overall
• Bright brass Thread Height
• Not for air service Item No. Mfr. No. Size (in)
101985781 15202 1/8-27 NPT 3 1/4
100874106 15212 1/4-18 NPT 3 1/4
101982211 15214 1/4-18 NPT 4 1/4
Dia. Width 101982266 15215 1/4-18 NPT 5
Item No. Mfr. No. (in) (in) 102001613 15216 1/4-18 NPT 5 1/4
101981646 04100 1 1/4 3/4 101982026 15217 1/4-18 NPT 6 1/4
101368137 04101 1 1/2 31/32 102003527 15218 1/4-18 NPT 7 1/4
101982100 04102 2 1 5/32 101981863 15221 3/8-18 NPT 5
101982120 15232 1/2-14 NPT 5 1/4
101982121 15234 1/2-14 NPT 7 1/4
Features: Overall
• Glass window Thread Height
• Leak tight Item No. Mfr. No. Size (in)
• Plated bodies 102025791 15312 1/4-18 NPT 3 3/4
• Hexagon heads 101982268 15313 1/4-18 NPT 4 7/16
• Maximum temperature 500 °F 102001614 15314 1/4-18 NPT 4 7/8
• Not for air service 101982123 15315 1/4-18 NPT 5 5/8
102003529 15316 1/4-18 NPT 5 7/8
Pressure Thread 101981363 15318 1/4-18 NPT 7 7/8
Item No. Mfr. No. (psi) Size 101981662 15322 3/8-18 NPT 5 7/8
101982108 04401 3,500 1/2-14 NPT 102001615 15323 3/8-18 NPT 6 7/8
101981349 04402 3,000 3/4-14 NPT 101982214 15324 3/8-18 NPT 7 7/8
102001604 04403 2,500 1-11 1/2 NPT 102001616 15333 1/2-14 NPT 6 7/8
101981764 04405 1,500 1 1/2-11 1/2 NPT 101982269 15334 1/2-14 NPT 7 7/8
160 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Liquid Sight Flow Plain Drive Oil Hole Cover
Features:
• Aluminum gold anodized
• Maximum working pressure 120 psi
• Maximum temperature -40 °F to 250 °F Material: Steel, Zinc-Plated
• Not for air service
Dia. Overall Height
Top NPT Bottom NPT Dia. Item No. Mfr. No. (in) (in)
Item No. Mfr. No. Female (in) Female (in) (in) 101965654 00405 5/8 13/16
101981903 04281 1/4-18 1/4-18 1 101976369 00408 1 13/64 1 1/16
102002505 04282 3/8-18 3/8-18 1 9/32 101981741 00409 1 9/16 1
101981840 04286 1/2-14 1/2-14 1 5/8
Applications:
• Tanks
• Reservoirs
• Hydraulic equipment
• Steel mill pumps
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 161
Lubrication Products & Equipment
Threaded Oil Hole Cover Style 1631 Breather Vent
For maintaining safe, equalized pressure in a unit while being filled or under sudden
Features: changes in ambient temperature.
• For applications requiring a strong, dependable oil hole cover,
generally applicable to motors, machinery and moving parts
of all types
Breather
Item No. Mfr. No. Thread Size
100874314 300805a,b 1/8 PTF Material: Steel, Zinc-Plated
100872779 313650 3/8 PTF SAE Short Thread Type: NPT
100874443 321620 1/8 PTF
Vent Type: Screen & Nylon Filtered
a
2031405 GM. Thread Overall
b
A-5277546. Size Dia. Height
Item No. Mfr. No. (in) (in) (in)
Vent
101841672 1633-012801 1/8-27 5/8 1 9/32
Opening Pressure 101484724 1633-025801 1/4-18 7/8 1 11/32
Item No. Mfr. No. Thread Size (in) 110027995 1633-037801 3/8-18 7/8 1 11/32
100874259 131000-T 1/8 PTF 12 110027996 1633-050801 1/2-14 1 1 15/32
100874324 304810 1/8 PTF 1 to 3 110027998 1633-075801 3/4-14 1 1/2 1 11/16
162 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Style 1637 Low Profile
Breather Vent Watchdog® Oiler
Features:
• Steel breathers provide a low profile design Features:
• Can be installed and removed with automatic tools, • Replaces standard sight glass
allowing for fast handling • Adds make-up oil reservoir
• Designed for use in differentials, transmissions, gearboxes • Closed system prevents contamination
and other applications where space is at a premium and • Mounts on center line
ease of installation is required • Integral viewpoint
• ANSI B73.1M-1991
Material: Steel, Zinc-Plated
Thread Type: NPT Applications:
Dia.: 3/4 in • Bearing housings
Vent Type: Screen Filtered • Gearboxes
• Chemical processing
Thread Overall • Power generation
Size Height • Pulp and paper
Item No. Mfr. No. (in) (in) • Utility industries
101672687 1637-037807 1/4-18 3/4
Thread Size
Reservoir NPT Capacity
Item No. Mfr. No. Body Material Material (in) (oz)
100873288 31820 Aluminum Glass 3/4 4
100873287 31818 Aluminum Glass 1/2 4
100873289 31821 Aluminum Glass 1 4
100872822 31804 Polysulfone Thermoplastic 1 4
Port Size
Port NPT
Item No. Mfr. No. Location (in)
100873283 31808 Bottom Port 1/2
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 163
Lubrication Products & Equipment
Watchdog® Desiccant Breather
The Watchdog® Desiccant Breathers are a unique particle filtration and water removal system. Prevents destructive contaminants from entering industrial equipment as air is
breathed in and out due to thermal expansion or fluid level changes.
Features: Applications:
• Water vapor absorbent • Circulating oil systems
• Color indicator notifies you when replacement is needed • Gearboxes
• Dual filtration system • Process pumps
• Bi-directional air flow • Storage tanks
• Durable construction • Vacuum systems
• Prolongs fluid life • Hydraulic systems
• Reduces abrasive wear, downtime and repair costs • Transformer cases
• Anywhere that industrial equipment needs to be dry and clean
164 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
Connection
Size
Item No. Mfr. No. (in) Connection Type Max. Flow Rate Adsorption Capacity
116027357 DC-IL-VG-1 3/8 Multi-Fit (NPT, BSPP, BSPT) 1.45 cfm @ 1 psid 1.68 fl oz/50 mL
115737103 DC-IL-VG-1-Ra 3/8 Multi-Fit (NPT, BSPP, BSPT) 1.45 cfm @ 1 psid 1.68 fl oz/50 mL
115301044 DC-IL-VG-4 1 Multi-Fit (NPT, BSPT, NPSM) 2.98 cfm @ 1 psid 11.3 fl oz/353 mL
115301048 DC-IL-VG-4-Ra 1 Multi-Fit (NPT, BSPP, BSPT) 2.98 cfm @ 1 psid 11.3 fl oz/353 mL
116027356 DC-IL-EX-4 1 FNPT 24 cfm @ 1psid 27.0 fl oz/798 ml
116027311 DC-IL-EX-4-Ra 1 FNPT 24 cfm @ 1psid 27.0 fl oz/798 ml
a
Replacement cartridge.
VentGuard™ Breather
Des-Case’s new and improved VentGuard™ breathers now have up to 35% more adsorption capacity for longer life and improved check valves for dramatically increased airflow.
Check valve technology isolates the system and only ‘breathes’ when necessary, making them an ideal solution balanced hydraulic systems. Check valves provide slight system
pressurization that allows for controlled breathing without excessive pressure build up. The system breathes only when pressured to do so, and then the air is cleaned and dried
before it is introduced into the system, ensuring a clean, dry head space.
Features:
• Filter efficiency down to 0.3 μ absolute (β 0.3 ≥ 200)
• Internal check-valve system creates a nearly sealed system
• Resilient, polycarbonate plastic body and nylon standpipe
• Minimizes additive stripping and sludge buildup
• Prevents water contamination of fluid
• Prevents rust forming condensation
• Increases oil and filter life
• Bidirectional, controlled airflow
• Multi-tiered filtration process
• Water vapor adsorbent
• Resilient, polycarbonate plastic body and nylon standpipe
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 165
Lubrication Products & Equipment
Always Innovating.
Always Responsive.
Graco stays true to its mission – always. We deliver high-quality, reliable and accessible products and services for
modern lubrication, backed by world-class customer service and support. Compelled to meet exacting standards of
excellence, we continuously design and redesign our systems to simplify everyday workloads for our customers, so
they can be more productive and profitable amid a fluid, ever-changing world. Today. Tomorrow. Always.
EM SERIES METERS
®
EGP PUMPS NEW!
Low-Flow and High-Flow Manual Meters Electric Gear Pumps for High-Volume Transfer
The EM Series features a robust design at an affordable EGP pumps provide durable pumping solutions for all
price. These meters are weather-rated and impact- your oil and fluid transfer applications and are available
resistant to withstand the harshest shop conditions. in AC and DC configurations.
Typical Applications: Typical Applications:
• Industrial • Filling in-plant machinery
• Automotive dealerships • Filling bulk tanks from drums
• Service and fast lube centers • Lubricant transfer from remote locations
• Lube trucks • Construction equipment
• Mining • Agricultural equipment
• And more! graco.com/EM • And more! graco.com/EGP
graco.com
©2021 Graco Inc. 353006 Rev. A 4/21 All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All written and visual data contained in this document are based on the latest
product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For more information on Graco’s intellectual property, see www.graco.com/patent or www.graco.com/trademarks.
166 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Lubrication Products & Equipment
We pioneer motion
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 167
Lubrication Products & Equipment
PRACTICAL, HANDS-ON
LUBRICATION TECHNOLOGY TRAINING
Power your productivity with training courses from Applied Industrial Technologies!
Our MaintenancePRO® training program is the single best investment you
can make towards increasing uptime at your facility.
Lubrication Technology
MP-10006
Duration: 16 hours
Almost any maintenance professional would benefit from this overview of lubrication systems. Course topics include the basics of lubrication,
lubricants, filtration, maintenance, failure analysis and system design.
Benefits of this training include the ability to:
• Understand lubrication specifications, lubrication systems and applications, PLC lube controllers and mechanical timers
• Maintain system components, including pumps, filters, valves, reservoirs and manifolds, as well as different types of seals and their
compatibility with different fluids
• Respond quickly to equipment and system failures
• Use the knowledge gained to maintain, repair and test lubrication systems and equipment
• Minimize downtime due to bearing failure or hydraulic issues
168 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Industrial Chemicals & Coatings
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial
Industrial Chemicals
Chemicals 4
& Coatings
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
Pneumatic 9
Products
Hydraulic
Brand
10
Products
Industrial Hose,
Valves & Process 11
Equipment
Service Center
Directory
Industrial Chemicals & Coatings
DON’T LET
A LITTLE LOCTITE®
FASTENER LOCTITE®
LOCTITE®
263
277
PROBLEM LOCTITE®
222
(OIL TOLERANT)
1/4” TO 3/4”
(M6 TO M20)
1/16” TO 1/2”
(M2 TO M12)
32/32
360°F
31/31
300°F
UP TP 1/4” 10/29
(UP TO M6) 20/7 LOCALIZED
300°F LOCALIZED HEAT
USE LOCTITE®
6/3 360°F
HEAT
MAY BE
MAY BE
REQUIRED
STANDARD REQUIRED
300°F STANDARD
DISASSEMBLY
DISASSEMBLY
WITH HAND
THREADLOCKER
WITH HAND TOOLS
VERY EASY TOOLS
*Fixture time: Time needed for the bonded assembly to gain handling strength Full Cure time: Time needed for the bonded assembly to attain full strength
Breakaway Torque: Torque needed to loosen the assembly Prevail Torque: Torque needed to turn the fastener by 180°
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere.
® = registered in the U.S. Patent and Trademark Office. © 2020 Henkel Corporation. All rights reserved. DSGN0010365 (12/20)
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
21/22
Adhesives Epoxies
Acrylic Adhesives....................................................................180 Epoxy Compounds...........................................................182-185
Adhesive Kits..........................................................................170 General Purpose................................................182,184-185,190
Applicator Guns & Nozzles..............................................177,179 Primers....................................................................................187
Contact & Construction Adhesives..........................................178 Repair Epoxies (Putty, Liquid, Ceramic)...... 179,181-185,188-190
Epoxy Adhesives..............................................................180,182 Oils
Instant Adhesives.............................................. 170-171,178-179 Penetrating.............................................................................205
Plastic Adhesives.....................................................................176 Starting Fluids.........................................................................210
Primers....................................................................................172 Painting Equipment
Retaining Compounds.............................................................172 Brushes...................................................................................197
Spray Adhesives......................................................................178 Paint Trays...............................................................................197
Structural Adhesives...............................................................180 Rollers.....................................................................................197
Threadlockers...................................................................170-172 Paints
Urethanes........................................................................186-187 Activators, Paint Removers & Thinners........173,189,196-197,200
Cleaning Chemicals & Supplies Aerosol Paints & Coatings................................. 191-194,197-202
Aerosol Dusters................................................................214-215 Enamel Paints..................................................................191-196
Anti-Spatter Sprays.................................................................214 Epoxy Paints..............................................................189-190,196
Belt Dressings.........................................................................215 Marking Paints, Markers & Crayons.................. 193-194,197-200
Carb & Choke, Brake & Battery Cleaners.... 179,202-204,209-213 Primers......................................................................176,191-192
Contact Cleaners.......................................................183,204-209 Sealants
Degreasers & Safety Solvents.............. 179,183,204-207,211-213 Concrete Repair......................................................................189
Electrical Cleaners............................................................203-208 Electrical.................................................................................176
Gasket Removers....................................................................173 Extreme Temperature.......................................................174-177
General Purpose................................. 197,204,205-207,209-214 Gasket.......................................................................172-174,177
Part Washers & Accessories..............................................202-205 Glass & Metal.........................................................................174
Penetrants...............................................................................213 Insulation & Weatherstripping..................................174,176-178
Coatings Multi-Purpose................................................... 174-176,178-179
Anti-Slip Coatings...................................................................190 Neutral Cure...........................................................................175
Corrosion Inhibitors.........................................................200-202 Pipe & Thread..............................................171-172,175,177,182
Electrical Coatings...........................................................202,214 Silicone............................................................................172-177
Galvanizing Compounds..................................................192,201 Solvent-Resistant.............................................................171-173
Insulating Varnishes................................................................202
Layout Fluids....................................................................197,200
Metal Protective Coatings.......................................................201
Wearing Compounds................................................183-185,200
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Color: Blue
1329837 1329467 1329505 Strength: Medium
Fastener Size Range: 1/4 in to 3/4 in
Size
Item No. Mfr. No. (mL) Container
222MS Threadlocker
™ 100869837 1329837 10 Tube
100869835 1329467 50 Bottle
100869836 1329505 250 Bottle
A low strength threadlocker ideal for small fasteners.
Features:
• Apply to threaded parts before
assembly
• Parts can be disassembled with
262™ Threadlocker, High Strength
hand tools
• Small fasteners up to 1/4” diameter Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.
(6 mm)
• Low strength metals, such as brass Features:
or aluminum • Solvent resistant
• Long engagement length fasteners • Permanent, high strength product
• Components requiring occasional • Localized heating and hand tools are required to separate parts
adjustment • Apply to fasteners up to 3/4” (20 mm) before assembly
• MIL Spec (S-46163A) Type II, Grade M • Mil Spec S-46163A Type II, Grade O
• NSF P1 approved • Approved by the American Bureau of Shipping
• CFIA • CFIA
• NSF P1 approved
Color: Red
Color: Purple Strength: High
Strength: Low Fastener Size Range: 3/4 in or smaller
Fastener Size Range: 1/4 in or smaller
Size
Size Item No. Mfr. No. (mL) Container
Item No. Mfr. No. (mL) Container 100867338 231926 10 Bottle
100867327 135334 50 Bottle 100867339 135374 50 Bottle
170 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
565™ Thread Sealant
263™ High Strength Threadlocker Controlled lubricity prevents galling and protects mated threaded areas from rust and corrosion.
Versatile, high strength liquid threadlocker
engineered to cure consistently on a variety of Features:
metals, despite minor surface contaminants. Works • Lead product • OTC: Complies with VOC regulations as detailed
on steel, stainless steel and most plated fasteners. • Cures rapidly to provide immediate, low by the Ozone Transport Commission
Tolerates thread lubrication, anti-corrosion and pressure sealing • CSA 3319-81, CSA 3319-01
protection fluids. Heat required for removal. • Resists up to 300 °F • UL® MH8007 (N)
• Formulated specifically for metal, tapered, • NSF/ANSI 61 approved
Features: pipe thread fittings • ULC approved
• High strength primerless threadlocker • Fittings up to 2” (50 mm) in diameter • Canada Food Inspection Agency approved
• Temperature resistance to 360 °F • CARB: Complies with VOC regulations as
(182 °C) detailed by the California Air Resource Board Color: White
• Oil tolerant curing on as-received Strength: Controlled
fasteners without cleaning Container: Tube
• Cures without primer on steel, stainless
steel and most plated fasteners Size
• CFIA Item No. Mfr. No. (mL)
• NSF 61 approved 100867467 88551 50
100867468 88552 250
Color: Red
Strength: High
Fastener Size Range: 1 in or smaller
Container: Bottle
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 171
Industrial Chemicals & Coatings
545™ Thread
Sealant 7649™ Primer
Loctite® 545™ Thread Sealant contains no fillers or
particles that could contaminate system fluids, foul Features: Features:
valves or clog fine filters and screens. • A solvent-based primer that features a • “Formed-in-Place” gasket, excellent
very long on-part life chemical resistance
Features: • Use to speed cures of all Loctite® • Recommended for rigid iron, steel and
• Lead product anaerobic products aluminum flanges
• Excellent solvent resistance • Ensures proper cure on inactive metals • Will not tear or decay
• High lubricity • Ideal for cure conditions below • Solvent resistant
• Recommended primer is Loctite® room temperature • Parts disassemble easily, even after extended service
7649™ Primer N™ • CFIA • CARB: Complies with VOC regulations as detailed by
• CARB: Complies with VOC regulations • NSF P1 approved the California Air Resource Board
as detailed by the California Air • ASTM D-5363 • OTC: Complies with VOC regulations as detailed by the
Resource Board • NSF/ANSI 61 approved Ozone Transport Commission
• OTC: Complies with VOC regulations Color: Clear/Green • NSF/ANSI 61 approved
as detailed by the Ozone Transport Base Chemical: Acetone • CFIA
Commission Dry Times: 70 sec Applications:
• For fittings up to 2” (50 mm) in diameter On-Part Life: 30 days • Fills gaps up to 0.050” (1.27 mm)
• High pressure • Can be used on a variety of metal
• Designed for both hydraulic and Size surfaces, including aluminum
pneumatic systems Item No. Mfr. No. (oz) Container • Gearboxes and engine casings Color: Red
• CFIA
100867319 209715 4.5 Aerosol
• Approved by the American Bureau Size
of Shipping Item No. Mfr. No. (mL) Container
Color: Purple 112690417 2096064 50 Tube
Strength: High 112690418 2096061 300 Cartridge
Size
Item No. Mfr. No. (mL) Container 609™ Retaining Compound 518 Pen
100867465 135486 50 Bottle
Features: Features:
• Fixtures in 10 minutes • Semi-flexible, medium strength anaerobic
• Withstands temperatures up to 300 °F flange gasket
Connect (149 °C)
• Low viscosity
• Commonly used to augment press
• For active and inactive rigid metal flanges
• Cures through minor surface contamination
• Adapts to flange surface irregularities and
with Us! fit assemblies
• Can be applied to dissimilar metals
gaps up to 0.25 mm
• Gel type consistency
• Bonds rigid metal assemblies • Seals instantly against low pressure
• MIL Spec (R-46082B) Type I • Reduces inventory costs – no need for large
• CFIA inventory of cut gaskets
• Resists high pressure when fully cured
Color: Green
• No compression set or misaligned gaskets
Strength: Low
• Easy to automate
Gap Fill (Diametral): 0.005 in
• Reduces process costs – eliminates manual
Shear Strength: 2,300 psi
assembly of conventional gaskets
Size • NSF P1 reg. no. 123758
Item No. Mfr. No. (mL) Container Size
100867491 135512 50 Bottle Item No. Mfr. No. (mL)
100867492 135513 250 Bottle 114791839 2392164 25
172 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
*
Gasket Remover
Solvent-based cleaner that helps remove baked-on Aviation Form-A-Gasket® The Right Stuff® 90 Minute
fiber gaskets, gasket adhesives and sealants.
No. 3 Sealant Gasket Maker
Features:
• Loosens carbon deposits The Right Stuff® 90 Minute Gasket Maker Black is the
Features: only gasket maker in a tube that can return a vehicle
• Reduces excessive scraping • Non-hardening liquid gasket
• Contains no methylene chloride back to service quickly – just 90 minutes curing time!
sealant/dressing/coating Temperature range -65°F to 500°F Intermittent.
• Aids in removal of paint and varnish • Thin, brushable dressing/sealer for
• Removes graffiti from metal and stone close fitting parts
• VOC compliant Features:
• Resistant to antifreeze, aviation fuels, • Low viscosity allows for easy squeeze
• CARB: Complies with VOC regulations high detergent oils and lubricants
as detailed by the California Air tube application
• Does not contain any ozone-depleting • Blow-out resistant after 90 minutes
Resource Board substances
• OTC: Complies with VOC regulations • Replaces most cut gaskets
• Conforms to MIL-S-45180 D, Type III • Low odor and volatility
as detailed by the Ozone Transport
Commission • Non-corrosive
• LADCO: Complies with VOC regulations Size • Resistant to ATF/oil/coolant
as detailed by the Lake Michigan Air Item No. Mfr. No. (oz) Container • Consistent sealing
Directors Consortium 101441665 80017 16 Bottle • Sensor safe
• Complies with RoHS restrictions on the
use of certain hazardous substances in WARNING: This product can expose you to methyl
isobutyl ketone, which is known to the state of California Color: Black
electrical and electronic equipment Temperature Range: -75 °F to 450 °F
• Removal of conventional and to cause cancer and reproductive harm. For more
formed-in-place gaskets on motors, information, go to www.P65Warnings.ca.gov.
Size
pumps and flanges Item No. Mfr. No. (oz) Container
• Not safe on plastics 117307222 25228 10.1 Cartridge
• NSF C3 registered for use in meat 102223267 25224* 7 Automatic Tube®
and poultry plants 102061551 33694 10.1 Cartridge
WARNING: This product can expose you to chemicals
including carbon black, which are known to the state of
Container: Aerosol
California to cause cancer. For more information, go to
www.P65Warnings.ca.gov.
Size Net Wt.
Item No. Mfr. No. (oz) (oz)
101849738 03017 16 12
*
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov. Ultra Black Gasket Maker
®
Features:
• Fast curing
• Sensor-safe, low odor and noncorrosive
• High flexibility
Ultra Blue® RTV Silicone
• Resists excessive vibration Gasket Maker
• Oil resistant
• Meets performance specs of OE Features:
silicone gaskets • Eight times more flexible than
• Does not contain any cork/composite gaskets
ozone-depleting substances • Low odor
• Resists excessive vibration
• Oil resistant
Applications:
• Sensor safe
• Create form-in- • Oil pans
• Noncorrosive
SI 5699 RTV Grey, Silicone
™ place gaskets • Pump housings
• Does not contain any ozone-depleting
• Compressors • Transmission pans
Gasket Maker • Gearboxes • Valve covers
substances
• Create form-in-place gaskets
• Machine tools
Color: Blue
Features: Temperature Range: -65 °F to 400 °F
• High modulus for rigid flange assemblies Color: Black
• Excellent oil, transmission fluid, gear oil and Temperature Range: -65 °F to 400 °F Size
water/glycol resistance Item No. Mfr. No. (oz) Container
• Medium-body is easy to dispense Size 101435327 81724* 3.35 Tube
• Noncorrosive Item No. Mfr. No. (oz) Container 112486818 85519* 9.5 PowerBead™ Can
• Low odor 101441943 24105 13 Cartridge 101440178 81725 13 Cartridge
• Low volatility
• Withstands high vibration WARNING: This product can expose you to quartz, WARNING: This product can expose you to quartz,
• CARB: Complies with VOC regulations as which is known to the State of California to cause which is known to the State of California to cause
detailed by the California Air Resource Board cancer. For more information, go to cancer. For more information, go to
• OTC: Complies with VOC regulations as detailed www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
by the Ozone Transport Commission
Color: Gray
Gasket Type: Silicone
We are All Things Industrial®
Size Visit Applied.com/about
Item No. Mfr. No. (mL) Container
100867306
100867304
135275
135270
70
300
Tube
Cartridge
to learn more.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 173
Industrial Chemicals & Coatings
174 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Size
Item No. Mfr. No. Color (mL) Container
737NU300ML
101927992 Clear 300 Cartridge
CRT CL
Also available in black and white.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 175
Industrial Chemicals & Coatings
® ®
Size
Item No. Mfr. No. Color (mL) Container
101927979 739WH300ML CRT White 300 Cartridge
101928276 739BL300ML CRT Black 300 Cartridge
®
Color: Off-White
Features:
Prefer the Applied® Digital Catalog? • Temperature resistance up to 600 °F
• Acceptable for use in meat and poultry plants
• Qualifies under MIL-A, 46106A, galvanized repair
Download the FREE catalog mobile app and get
access anytime or anywhere you need it!
Color: Red
Visit Applied.com/catalog Size
Item No. Mfr. No. (oz) Container
100849285 17130 10.3 Cartridge
WARNING: This product can expose you to titanium dioxide, which is known
to the State of California to cause cancer. For more information, go to
www.P65Warnings.ca.gov.
176 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Features:
• Cures at room temperature to a clear, flexible silicone rubber Features:
• Single component sealant for gasketing, sealing, bonding and • 12:1 ratio
weatherproofing applications • 40% lighter than comparable models
• Temperature range from -60 °F to 450 °F • Rotating barrel
Color: Clear
• Full-time patented dripless feature
Size • High quality peened rod
Item No. Mfr. No. (oz) Container ETS2000 • Powder metal drive dog
100849287 17150 10.3 Cartridge Professional Grade
Features:
• Smooth round rod
• Cradle frame
• 5:1 thrust ratio
All Purpose 100% Silicone C050
Rubber Sealant Economy Gun
Gun Size
Item No. Mfr. No. Grade (oz)
102036494 .04477105 Economy 10
White Lightning® Silicone Rubber is a premium 100% silicone sealant that 101992801 WL9902000 Contractor 10
features outstanding protection against water and weather damage. Its
excellent durability and flexibility make it the perfect sealant for areas exposed
to heavy wear and harsh elements. White Lightning® Silicone Rubber is *
commonly applied at windows, doors, siding, trim and other general purpose
applications. It is excellent for interior/exterior application on ceramic tile,
RTV Silicone Adhesive/Sealant
porcelain, vinyl, wood and glass.
Features:
• Seals, bonds, waterproofs and protects
• Cures at room temperature – no special curing methods required
Features: • The chemically stable formulations show little change in physical properties
• Excellent flexibility after exposure to rain, snow, ozone, temperature extremes or weathering
• Watertight seal • Pressurized tube features Select-A-Bead™ nozzle for easy control of bead
• Cured sealant is mold and mildew resistant width
• Lifetime guarantee Container: Tube • Clear - Forms a barely visible, watertight seal and is ideal for windows,
• USDA compliant Temperature Range: -80 °F to 400 °F joints, duct work and most electrical applications
• Red - A high temperature, low odor, noncorrosive gasket sealant for a
Size variety of sealing and gasket applications that require no sag or shrinkage at
Item No. Mfr. No. Color (oz) temperatures ranging from -80 °F to 500 °F
111952567 W11120010 White 10 • Black - Low odor, noncorrosive formulation for filling gaps between mating parts,
111952568 W11121010 Clear 10 gearboxes, pumps, motors and general gasket sealing
• White - Designed for pipes, outdoor construction, HVAC and high moisture, indoor/
WARNING: This product contains a chemical(s) known to the State of California to cause outdoor applications
cancer. For more information, go to www.P65Warnings.ca.gov. • Blue - A heavy-duty industrial gasket sealant for a variety of applications, including
duct work, form-in-place gaskets, electrical, plumbing, HVAC,
Container: Cartridge aircraft and more
Features:
• USDA compliant Temperature Range: -85 °F to 500 °F Compliances:
• TT-S-001543A
Size • TT-S-00230C
Item No. Mfr. No. Color (oz)
• ASTM C-920
111952569 W11127010 Red 10 • MIL-A-46106, Type 1
WARNING: This product contains a chemical(s) known to the State of California to cause
cancer. For more information, go to www.P65Warnings.ca.gov. Size
Item No. Mfr. No. Color (oz) Container
101889978 14072a,* Black 8 Tube, Pressurized
101843624 14059a,* Red 8 Tube, Pressurized
101844081 14075 Red 12 Cartridge
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 177
Industrial Chemicals & Coatings
STOP GAP!® Minimal & Triple HY 4060 GY™
Expanding Insulating Foam
Loctite® HY 4060 GY™ is a two-component, general purpose structural adhesive that
provides a high strength combined with fast fixture at room temperature. Loctite® HY
4060 GY™ provides good temperature and moisture resistance, which also makes it
Features: Applications: suitable for applications in high temperature/humidity environments. It is designed
• Seals and insulates • Masonry to bond a variety of substrates, including metals, most plastics and rubbers. This
• Dries tack-free in 30 minutes • Wood product is ready to use and can be dispensed directly from the pack without additional
• Cures in eight hours • Metal equipment. The two-colored components of Loctite® HY 4060 GY™ allow for indication
• Can be applied at temperatures • Glass of proper mixing.
between 60 °F and 100 °F • Most plastics
• Can be trimmed, shaped,
sanded, painted or stained
178 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Dispensing Equipment
401™ Instant Adhesive Manual dispensing gun and custom designed static mixing for 50 mL systems.
For the assembly of difficult-to-bond materials. Use With Cartridge
Particularly suited for bonding a wide range of Item No. Mfr. No. Item Description (mL)
materials, including metals, plastics, elastomers,
wood, paper and leather. 101905108 14285 Ø.25” Mark 5™ Mix Nozzle 50
106421345 3333 Ø.394” Mix Nozzle 400
Features: 102219148 15047 4:1 Mix Nozzle 400
• CARB: Complies with VOC 101933009 14280 Mark 5™ Manual Gun 50
regulations as detailed by the
California Air Resource Board
• OTC: Complies with VOC
regulations as detailed by the
Ozone Transport Commission
Devcon EZ-Spray Ceramic
Color: Clear
Gap Fill: 0.005 in Devcon EZ-Spray Ceramic is a sprayable, solvent-free, high performance
Viscosity: 90 cP ceramic-filled epoxy for sealing, protecting and repairing surfaces subject
Cure Speed Fixture: 5 sec to erosion, corrosion and wear. Significantly reduces equipment repair time
with easy-to-use delivery system.
Size Features:
Item No. Mfr. No. (g) Container
• Fast application time due to spray delivery and automix nozzle
100867393 135429 20 Bottle • Eliminate product wastage
• Cartridge allows for use of partial portions
• Excellent chemical resistance
• Temperature resistance to 175°C
• No VOCs
• Fast cure time
Size
Item No. Mfr. No. (g) Container
100867409 233998 3 Tube
100867410 135462 20 Tube
100867412 88525 300 Cartridge Height Length Width
Item No. Mfr. No. (in) (in) (in)
116118093 14404 6 27 1/4 15 3/4
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 179
Industrial Chemicals & Coatings
5-Minute® Epoxy
A rapid-curing, general-purpose adhesive/encapsulant.
Color: Clear
Cures in one hour.
Use w/ Use w/
Item No. Mfr. No. Size Container Dispenser No. Nozzle No.
100849309 14250a 25 mL Dev-Tube™ — —
100849255 14270 50 mL Cartridge 14280 (manual) 14285
100849249 14210 2.5 oz Tube — — Features:
100849294 DA051 400 mL Cartridge 14410 (manual) 3333 • A two-part methacrylate adhesive designed for structural bonding of thermoplastic,
metal and composite assemblies
100849248 14200 15 oz Bottle — —
• Well suited for bonding thermoplastic materials, this adhesive combines high
100849268 14630 9 lb Bottle — — strength and stiffness with the ability to adhere difficult-to-bond materials
a
Dev-Tube™ two-in-one dispenser eliminates error in measuring two-part epoxy adhesives. • Combined at a 1:1 ratio
• Working time of 15 to 18 minutes
5-Minute® Epoxy Gel • Achieves a rapid fixture in 30 to 35 minutes at room temperature
• Supplied in ready-to-use cartridges
Thixotropic, nonmigrating gel adhesive with excellent gap-filling
Color: Opaque • Use for ABS, acrylics, epoxies, FRP, PVC, polyesters, urethanes, vinyl esters
properties. Cures in one hour.
and more
Size Use w/ Use w/
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No. Plexus® MA310 Methacrylate Adhesive
100849250 14240 25 Dev-Tube™ — — Size
100849254 14265 50 Cartridge 14280 (manual) 14285 Item No. Mfr. No. (mL) Color
106349144 31500 50 Cream
2 Ton® Clear Epoxy 106318784 31000 400 Cream
Extremely strong, medium-cure, water-resistant epoxy adhesive. Color: Clear WARNING: This product can expose you to butadiene, which is known to the State
of California to cause cancer, birth defects or other reproductive harm. For more
Size Use w/ Use w/
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No.
information go to www.P65Warnings.ca.gov.
100849310 14310 25 Dev-Tube™ — —
100849253 14260 50 Cartridge 14280 (manual) 14285
Features:
10 Minute™ Epoxy • Provides a 20-minute fixture time and four to six minutes of working time
Flexible epoxy provides excellent adhesion to metals and has superior • Works in a mix ratio of 10:1
peel, impact and chemical resistance. Color: Black • Delivers great performance with a shear strength of 2,000 to 2,800 psi and tensile
Size Use w/ Use w/
strength of 2,000 to 2,500 psi
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No. • Minimum to maximum operating temperatures are -40 °F to 180 °F
• Compatible with ABS, acrylic, aluminum, FRP, gelcoat, polyester, PVC, stainless steel,
100849252 14255 50 Cartridge 14280 (manual) 14285 styrenic, urethane and vinyl ester materials
WARNING: This product can expose you to chemicals including carbon black, which
is known to the state of California to cause cancer. For more information, go to Plexus® 830 Methacrylate Adhesive
www.P65Warnings.ca.gov. Size
Item No. Mfr. No. (mL) Color
Epoxy Plus 25 Adhesive
™
115446637 35839 35 Grey
Rubber-toughened structural adhesive with superior 113473749 IT186X 490 Grey
peel, impact and fatigue resistance. Color: Grey
WARNING: This product can expose you to chemicals including titanium dioxide,
Size Use w/ Use w/ which are known to the State of California to cause cancer. For more information go to
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No. www.P65Warnings.ca.gov.
100849257 14278 50 Cartridge 14280 (manual) 14285
100849262 14350 400 Cartridge 14410 (manual) 14293
WARNING: This product can expose you to chemicals including carbon black,
Features:
which is known to the state of California to cause cancer. For more information, go
• Two-part methacrylate adhesive designed for structural bonding
to www.P65Warnings.ca.gov.
of thermoplastic, metal and composite assemblies
• Combined at a 1:1 ratio, MA300 has a working time of three to six
HP 250 Structural Adhesive minutes and reaches approximately 500 psi in 12 minutes and
High performance, toughened structural adhesive with 1,000 psi in 15 minutes at 74 °F (23 °C)
outstanding environmental, impact and chemical resistance. Color: Amber • Offers a combination of high strength and stiffness, as well as the
ability to bond a wide range of materials
Size Use w/ Use w/
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No. Plexus® MA300 Methacrylate Adhesive Viscosity: 50,000 cP
100849259 14315 50 Cartridge 14280 (manual) 14285
Size Use w/ Use w/
WARNING: This product can expose you to methylimidazole and methyl alcohol, Item No. Mfr. No. (mL) Color Dispenser No. Nozzle No.
which are known to the State of California to cause cancer, birth defects or other 100849258 14300 25 Straw — —
reproductive harm. For more information, go to www.P65Warnings.ca.gov. 106306554 30500 50 Off-White 14280 (manual) 14285
106365536 IT410 50 Black 14280 (manual) 14285
One Minute™ Epoxy Gel 106313185 IT412 400 Black 30020 (manual) 3333
Fast curing gel adhesive for filling gaps, cracks and holes. Color: Straw
106388055 30000 400 Off-White 30020 (manual) 3333
Size Use w/ Use w/ WARNING: This product can expose you to butadiene, which is known to the State
Item No. Mfr. No. (mL) Container Dispenser No. Nozzle No.
of California to cause cancer, birth defects or other reproductive harm. For more
100849256 14277 50 Cartridge 14280 (manual) 14285 information go to www.P65Warnings.ca.gov.
180 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Plastic Steel® 5
Plastic Steel® Plastic Steel® Minute® Putty Aluminum Putty Stainless Steel Brushable Ceramic Repair
Condition Liquid (B) Putty (A) (SF) (F) Putty (ST) Ceramic Epoxy Titanium Putty Putty
Color Dark Grey Dark Grey Dark Grey Aluminum Grey Red, Blue Grey Dark Blue
Mix Ratio by Weight / Volume (Resin; Hardener) 9:1 / 3:1 9:1 / 2.5:1 1.7:1 / 1:1 9:1 / 4:1 11:1 / 3.75:1 5.6:1 / 3.4:1 4.3:1 / 3.1 7:1 / 4.3:1
Functional Cure Hours 16 16 1 16 16 16 16 16
Pot Life Minutes @ 75 °F 45 45 5 60 58 40 21 25
Coverage inches²/pound @ 1/4” Thickness 52 48 49 70 50 7.6* 47 66
Adhesive Tensile Shear (ASTM D1002) 2,800 psi 2,800 psi 2,026 psi 2,600 psi 2,385 psi 2,000 psi 2,000 psi 2,000 psi
Compressive Strength (ASTM D695) 10,200 psi 8,260 psi 10,400 psi 8,420 psi 8,400 psi 15,200 psi 15,200 psi 12,700 psi
Maximum Service Dry Temperature 250 °F 250 °F 200 °F 250 °F 250 °F 350 °F 350 °F 350 °F
*Coverage: feet² @ 15 mils.
Plastic Steel® Liquid (B) Plastic Steel® 5 Minute® Stainless Steel Putty (ST)
Steel-filled liquid epoxy that can be Putty (SF) Stainless steel-filled epoxy putty for
cast over models for accurate detail patching, repairing and rebuilding stainless
reproduction when making holding Fast-curing, steel-filled epoxy for dependable emergency steel surfaces as well as food processing
fixtures, light-gauge forming dies repairs within one hour. equipment. ANSI/NSF 61 certified.
and molds.
Features: Features:
Features: • Approved by American Bureau of Shipping • Approved by American Bureau of Shipping
• Approved by American Bureau of Shipping
Plastic Steel® Putty (A) Aluminum Putty (F) We Are… All Things
The original metal-filled epoxy putty used Aluminum-filled epoxy putty for
for hundreds of routine maintenance, dependable, nonrusting repairs to Industrial®
production and tooling applications. aluminum castings, machinery and
equipment widely used in HVAC
Features: applications.
• Approved by American Bureau of Shipping
• Compliance MiL-PRF24176C Type I Features:
• Approved by American Bureau of Shipping
Size
Item No. Mfr. No. (lb)
100849296 10110 1 Size
100849219 10120 4 Item No. Mfr. No. (lb)
100849300 10610 1
WARNING: This product can expose you to chemicals
including benzene, which is known to the State of WARNING: This product can expose you to titanium
California to cause cancer, birth defects or other dioxide, which is known to the State of California to
reproductive harm. For more information go to cause cancer. For more information, go to Learn more at
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
Applied.com/about
Continued on next page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 181
Industrial Chemicals & Coatings
Continued from previous page.
Repair Products
Features:
• Approved by American Bureau of Shipping Working Time: 21 min Working Time: 25 min
Features: Applications:
• Specially formulated to bond to both wet and dry surfaces and can • Drums, tanks, castings, molds, sinks, tubs, gaskets,
even be applied under water mounting terminal blocks, packing wires and repairing
• A two-part epoxy putty packaged in a convenient one-piece stick breaker boxes
• Ready to use in less than one minute
• Can be tapped, sawed, drilled, machined, stained or painted Color: Gray
Working Time: 30 min
Size
Item No. Mfr. No. (oz) Container
101889966 14070 4 Stick
WARNING: Reproductive Harm - www.P65Warnings.ca.gov.
182 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Features:
• Protects against sliding
abrasion, non-sagging
and trowelable
• NEHC spec compliant
• NAVSEA spec compliant
Features:
• Eliminates the need for substrate to be thoroughly dry
before repairs
Color: Grey • Invaluable for use in pulp and paper mills, wastewater Features:
Container: Kit treatment plants and marine environments • Hardens in one hour
Operating Temperature: 250 °F • Does not contain any ozone-depleting substances • Applies in temperatures as low as 40 °F
Working Time: 30 min Applications: • Can be machined in one hour
Functional Cure: 7 h • Steel • Does not contain any ozone-depleting substances
• Iron • Complies with RoHS restrictions on the use of
Size • Aluminum certain hazardous substances in electrical and
Item No. Mfr. No. (lb) electronic equipment
• Brass
100869823 1323940 25 • Bronze alloys Color: Grey • Emergency repair
Color: Grey
• Concrete Container: Kit Container: Kit
• Wood Working Time: 45 min Working Time: 4 min
• Plastics Functional Cure: 24 h Functional Cure: 1 h
Size Size
PC 7317™ Nordbak® Item No. Mfr. No. (lb) Item No. Mfr. No. (lb)
Pneu-Wear 100849238 11800 1 100849228 10780 0.75
Features: WARNING: This product can expose you to carbon WARNING: This product can expose you to carbon
• Filled with small ceramic beads black and methyl alcohol, which are known to the State black and methyl alcohol, which are known to the State
and silicon carbide of California to cause cancer, birth defects or other of California to cause cancer, birth defects or other
• Protection against fine particle reproductive harm. For more information go to reproductive harm. For more information go to
abrasion to 250 °F (121 °C) www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
• Trowelable
• Approved by the American Bureau
Technical Training
of Shipping
• Agriculture Canada approved
• CFIA approved
• NEHC spec compliant Properly trained maintenance workers prevent and reduce costly
• NAVSEA spec compliant
• Lloyd’s register spec equipment downtime. MaintenancePRO® courses from
Color: Gray
Applied Industrial Technologies offer training on maintenance,
Container: Kit troubleshooting, component application and failure analysis.
Working Time: 30 min
Courses can also be customized to specific needs.
Size
Item No. Mfr. No. (lb) Learn More: Applied.com/training
100869887 209676 25
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 183
Industrial Chemicals & Coatings
Wearing Compounds
Wear-Resistant Wear Guard™ Wear Guard™ Wear Guard™ Combo Wear FC Carbide
Physical Properties Putty High Load High Temp Fine Load (Fast Cure) Putty
Color Dark Grey Grey Grey Grey Grey Grey
Mix ratio by weight/volume (Resin: Hardener) 9:1 / 4:1 2:1 / 2:1 13.7:1 / 6:1 2:1 / 2:1 2:1 / 2:1 8:1 / 4:1
Mixed viscosity cPs Putty Putty Putty Putty Putty Putty
Functional cure time hours 16 6-8 Heat Cured 6-8 2-3 16
Pot life minutes @ 75 °F 45 30 120 30 7 50
Coverage per pound inches2 @ 1/4 in thickness 56 50 60 50 50 64
Cured hardness (ASTM D2240) Shore D 85 87 87 87 87 85
Adhesive tensile shear (ASTM D1002) psi 2,200 1,474 2,300 1,375 1,450 1,350
Tensile strength (ASTM D638) psi 4,300 4,210 4,600 4,300 4,300 2,640
Compressive strength (ASTM D695) pli 9,800 11,000 13,200 11,000 11,000 8,160
Maximum service temperature °F dry 250 300 450 300 300 250
Coverage (feet2 @ 15 mils).
Wear-Resistant Putty (WR-2) Wear Guard™ High Temp Combo Wear FC (Fast Cure)
All-purpose epoxy putty for repairs
Wearing Compound Abrasion Resistant Epoxy
requiring low-friction finishes, such as High tech, three-component (two bead
High-temperature and high-density, ceramic
machine lathe beds. Machinable wear sizes plus silicon carbide) compound
bead-filled epoxy system for maximum
resistant system. for repairing process equipment quickly
wear and abrasion resistance. Temperature
resistance to 450° F. and returning it to service in as little as
Size 1 1/2 hours.
Item No. Mfr. No. (lb) Size
100849229 11410 1 Item No. Mfr. No. (lb) Size
100849230 11420 3 100849232 11480 30 Item No. Mfr. No. (lb)
WARNING: This product can expose you to titanium WARNING: This product can expose you to methyl 100849302 11450 9
dioxide, which is known to the State of California to isobutyl ketone, which is known to the state of California WARNING: This product can expose you to carbon
cause cancer. For more information, go to to cause cancer and reproductive harm. For more black and methyl alcohol, which are known to the State
www.P65Warnings.ca.gov. information, go to www.P65Warnings.ca.gov. of California to cause cancer, birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
184 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Zip Patch™
High-technology patching system that cures at room temperature. HVAC Repair (Special F)
Aluminum-filled epoxy adhesive, conveniently packaged.
Features: Applications:
• Hardens to a tough, durable, • Makes permanent, waterproof field repairs
waterproof finish in minutes to pipes, tanks and containers Features:
• Easy-to-use, fast-setting • Metals • Does not contain any
patch kit • Fiberglass ozone-depleting substances
• Does not contain any • Aluminum • Complies with RoHS restrictions
ozone-depleting substances • Wood on the use of certain hazardous
• Ceramics Color: Brown substances in electrical and
• Plastics Container: Kit electronic equipment
Working Time: 5 min
Size Applications:
Item No. Mfr. No. (in) • Fills voids or porosity in aluminum castings
100849303 11500 4x9 • Aluminum
• Metals
WARNING: This product can expose you to butadiene, which is known to the State of California to cause cancer, • Ceramics
birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. • Wood
• Concrete
• Glass
• Repairs copper coils in Functional Cure: 16 h
compressors Color: Grey
* Working Time: 60 min
DFense Blok™
Size
Item No. Mfr. No. (oz) Container
Patented advance epoxy technology with impact and sliding resistance in harsh environments. 100849315 19770 6.5 Tube
WARNING: This product can expose you to quartz,
which is known to the State of California to cause
cancer. For more information, go to
www.P65Warnings.ca.gov.
Wearing Compound Surface Wetting Agent Fast Cure (FC) Quick Patch
4 Hour Cure Primer/Cleaner 2 Hour Cure 30 Minute Cure
PC 9020™ Nordbak® Backing
Compound
Dfense Blok™ Wearing Compound Dfense Blok™ Fast Cure (FC) Loctite® PC 9020™ Nordbak® Backing Compound is an
Features: epoxy system for backing wear metal in gyratory and
• 4x better abrasion resistance than competition Features: cone crushers under typical dry service temperatures of
• 7x better drop impact strength than ceramic tile • Faster curing version of DFense Blok™, back in -28 °C to 104 °C (-20 °F to 220 °F).
• Superior sliding abrasion resistance service in 2 to 3 hours
• Withstands high impact conditions
• Less prone to unexpected fractures
Size Size
Item No. Mfr. No. Color (lb) Container Item No. Mfr. No. Color (lb) Container
101339805 11330* Gray 30 Pail 101731863 11350* Gray 9 Pail
WARNING: This product can expose you to titanium WARNING: This product can expose you to titanium
dioxide, which is known to the State of California to dioxide, which is known to the State of California to
cause cancer. For more information, go to cause cancer. For more information, go to
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
Features:
• Low odor
• Color-changing technology assures product is
Dfense Blok™ Surface Wetting Agent Dfense Blok™ Quick Patch fully mixed
• High compression strength
Features: Features: • High impact resistance
• Zero wait time before applying DFense Blok™ • Eliminates downtime with the exceptional fast cure • Convenient kit size and durable metal cans
wearing compounds 30 minutes functional cure • Low shrinkage
• Allows superior adhesion to vertical and overhead • The only ceramic bead-filled wear and • On-site application support
surfaces abrasion-resistant epoxy for emergency repair • Global availability
• Use in place of expanded metal • Repairs holes, leaks and cracks • More user friendly than traditional
• Orange color for easy visual inspection epoxy backing systems
Size
Size Item No. Mfr. No. Color (lb) Container
Item No. Mfr. No. Color (lb) Container 101690466 11320 Gray 1 Jar Color: Blue
101339806 11340* Orange 1 Jar Compressive Strength: 19,000 psi
WARNING: This product can expose you to carbon black
WARNING: This product can expose you to titanium and 4,4’-Isopropylidenediphenol, which are known to the
Size
dioxide, which is known to the State of California to State of California to cause cancer and birth defects or other
Item No. Mfr. No. (gal) Container
cause cancer. For more information, go to reproductive harm. For more information, go to
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov. 105971332 1694850 2 Kit
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 185
Industrial Chemicals & Coatings
Flexane® 80 Devcon® Flexane® High Flexane® Fast Flexane® Fast Flexane® Flexane® 80 Flexane® 94
Physical Properties Putty R-Flex™ Performance Putty Cure Putty Cure Liquid Brushable Liquid Liquid
Color Black Black Black Black Grey Black Black Black
Mix ratio by weight/volume (Resin:
72:28 88:12 94:6 80:20 80:20 80:20 77:23 69:31
Hardener)
Mixed viscosity cps Putty Putty Putty Putty 5,800 40,000 10,000 6,000
Pot life minutes @ 75 °F 20 4 10 8 8 45 30 10
Coverage per pound
94 110 94 94 106 104 106 106
inches2 @ 1/4 in thickness
Functional cure hours 12 15 16 3 2 24 16 16
Demolding time hours N/A N/A N/A N/A N/A N/A 10 5
Tensile strength
1,700 1,462 4,500 2,400 3,300 3,500 2,100 2,800
(ASTM D412) psi
Tear resistance
300 270 400 275 430 400 350 415
(ASTM D624) pli
Maximum elongation (ASTM D412) % 300 421 600 500 450 600 650 500
Maximum service temperature ºF wet 120 120 120 120 120 120 120 120
Maximum service temperature °F dry 180 180 180 180 180 180 180 180
186 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Continued from previous page.
Features:
• Functional cure in just 90 minutes Did You Know…
• Kit includes surface conditioner
• High adhesion with surface pull of the SBR rubber FL-10 Primer Applied® operates in
• Anywhere with SBR conveyor belts – mines, coal Required for bonding of all Flexanes®,
fired power plants, cement/aggregate, etc. including Flexane® 80 Putty, Flexane® 80 Liquid, six countries on three
Flexane® 94 Liquid, Flexane® Brushable and
Color: Black Flexane® High Performance Putty. continents. With more than
Container: Kit
Functional Cure: 90 min
Features:
• A one-part adhesion promoter
6,000 associates, we have
primer used on metals for ultimate extensive experience and a
Size adhesion of all Flexane urethanes
Item No. Mfr. No. (lb) • Does not contain any broad geographic reach to
110969185 15565 1.5 ozone-depleting substances
110782015 15550 4
serve a diverse
Container: Can
WARNING: This product can expose you to methyl customer base.
isobutyl ketone, which is known to the state of California Size
to cause cancer and reproductive harm. For more Item No. Mfr. No. (oz) We’re here to help.
information, go to www.P65Warnings.ca.gov. 100849281 15980 4
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 187
Industrial Chemicals & Coatings
PC 9410™ Magna-Crete™
A two-component, rapid-setting concrete repair and grouting system that bonds to concrete, wood, glass, steel and other construction materials.
Features:
• 13,000 psi when fully cured, can be used for -15 °F
• Resistant to most common liquids and chemicals
• Ready for traffic in 45 minutes
• Bonds to concrete, wood, glass, steel and other construction materials Functional Cure: 24 h
• Agriculture Canada approved Cure Speed Time: 24 h
• CFIA approved Working Time: 5 min
Color: Gray
Container: Kit
Size
Item No. Mfr. No. (gal)
100868226 235573 5
188 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
*
Concrete Saver® Pourable Concrete Saver® 6500 System, 100%
Concrete Patching Compound Solids Heavy-Duty Epoxy Floor Coating
Features: This is a two-part component system of base and activator. The base and activator are sold separately.
• Has a fiber reinforced, easy Combine for one gallon activated.
to mix, pourable material for
quick repairs to level Features:
concrete surfaces • Two-component, 100% solids epoxy, high gloss finish
• Will accept heavy traffic • Adheres to properly-prepared concrete
including forklifts only two • Excellent abrasion, impact and chemical resistance
hours after application • Endures continuous foot and rubber-tire vehicle traffic
• Just add to water, mix and power washings
and pour • Low-odor formula ideal for confined, low-ventilation areas
• Fast drying – foot traffic in 30 minutes and vehicle • Easy to apply and maintain
traffic in two hours • For best results, use with Penetrating Prime and Seal Primer
• Sets at low temperatures (down to 40 °F) Activator Base • Low VOC
• Can be applied from feather edge up to 4” • SCAQMD: Meets or exceeds applicable air emissions standards
in a single application established by the California South Coast Air Quality
• Suitable for interior and exterior applications Management District
• Odorless, non-toxic, • USDA acceptable
Color: Gray
non-hazardous formula Container: Pail Activator Type: Low VOC Standard
Penetrating Prime and Seal Primer Base Finish: High Gloss, Epoxy
Size
Item No. Mfr. No. (lb) Size Dry Time
Item No. Mfr. No. Color (gal) (h)
113262007 291070 55
100912343 S6511413 Clear 1 10
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 189
Industrial Chemicals & Coatings
Sierra Performance™ S60 Water-Based
Epoxy Maintenance Coating Kit
Features:
• Zero VOCs, zero HAPs, no solvent odor water-based epoxy maintenance coating kit
• Convenient, ready-to-mix two-component kit formulated to protect walls, equipment, machinery and rails from frequent washdowns, cleaning and
general maintenance in moderate industrial and commercial environments
• Meets LEED product requirements for indoor air quality
• No solvent odor during application, making it ideal for use in schools, healthcare facilities, food service areas, office buildings, hotels or in any area
where odors are an issue
• Can be used on steel, non-ferrous, concrete, masonry and previously coated surfaces
• Green Seal Certified: Meets or exceeds voluntary standards for environmental preferability as established by Green Seal
Dry
Size Time
Item No. Mfr. No. Color (gal) Container (min)
101800797 248287 OSHA Safety Red 1 Kit 30
101754036 248288 OSHA Safety Yellow 1 Kit 30
101794380 248291 OSHA Safety Blue 1 Kit 30
101795299 248285 Stone Gray 1 Kit 30
101795301 248290 Black 1 Kit 30
101793337 248286 Almond 1 Kit 30
101793245 248289 Oyster White 1 Kit 30
Size
Item No. Mfr. No. Color (gal)
103678137 261115 Safety Red 1
103695740 261116 Safety Orange 1
101754278 251286 Safety Yellow 1
102153568 261118 Safety Green 1
102226550 261117 Safety Blue 1
Features:
• Single-component epoxy, pedestrian-grade, anti-slip floor coating
• Ridged profile to handle heavy foot traffic and/or light vehicle traffic
• One-step application
• Withstands intermittent spills of mild chemicals, occasional steam and chemical cleaning
• Unused portion can be resealed for future use
• Contains aluminum oxide aggregate
• Apply with napless phenolic core roller to achieve desired profile
• Designed for use on concrete floors, aisles, walkways, stairs, areas around machinery or doorways subject to heavy foot or light vehicle traffic, where a
coarse, anti-slip safety finish is desired
• Also may be used on metal stairs or other metal surfaces where safety is a concern
• USDA acceptable Finish: Gloss
Container: Can
Size
Item No. Mfr. No. Color (gal)
100912385 AS5468402 Tile Red 1
100912384 AS5444402 Safety Yellow 1
100912389 AS5486402 Navy Gray 1
100912388 AS5482402 Silver Gray 1
100912387 AS5479402 Black 1
190 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Tough Coat® Acrylic Acryli-Quik™ Acrylic Lacquer
Enamel & Primer
Features: Applications:
Tough Coat® acrylic alkyd enamels feature a high-solids formula that ensures
• Hard, protective, durable finish • Any metal or wood surface
maximum coverage and performance. Tough Coat® delivers the ultimate in protection,
• High amount of solids ensures maximum • Motors
durability, high gloss and color retention.
coverage with excellent adhesion • Tools
• Dries fast; in just 8 minutes to the touch • Pipelines
• No Runs, no Drips, no Errors!™ formula • Conduit
Features: • VOC compliant and lead-free acrylic • Ducts
• Specially formulated for a variety of industrial applications • No recoat window • Drums
• Ideal for light- to heavy-duty painting projects, both indoors and outdoors • Uniform coverage • Cabinets
• Tough, protective coating resists chipping and peeling • Superior performance, both indoors • Furniture
• Excellent hiding characteristics and outdoors • Color-coding steel
• Smooth, even coverage • Other colors available and lumber
• Fast-drying; dries to the touch in just 15 minutes Container: Aerosol
• A00324 withstands temperatures up to 1,000 °F intermittently,
600 °F constant Size Net Wt.
• Other colors available Item No. Mfr. No. Color (oz) (oz) Finish
112934576 K02108A07 Banner Red 16 12 Gloss
112934575 K02101A07 Cherry Red 16 12 Gloss
112934571 K01813A07 Safety Yellow 16 12 Gloss
Applications:
• Metal 113286029 K01806A07 Sun Yellow 16 12 Gloss
• Motors 112934574 K02001A07 Hunter Green 16 12 Gloss
• Machinery 112934572 K01901A07 Regal Blue 16 12 Gloss
• Tools 112934573 K01910A07 True Blue 16 12 Gloss
• Tool boxes 112934569 K01605A07 Stone Gray 16 12 Gloss
• Steel bars 112934568 K01604A07 Shadow Gray 16 12 High Gloss
• Railings 112934566 K01601A07 Black 16 12 Gloss
• Conduit 112934567 K01602A07 Black 16 12 Ultra-Flat
• Ducts 112934564 K01501A07 White 16 12 Gloss
• Electrical equipment 112934565 K01502A07 White 16 12 Flat
• Pipelines and for marking areas 112934563 K01318A07 Gray Primer 16 12 Flat
112934560 K01314A07 Platinum Primer 16 12 Flat
Container: Aerosol
112934561 K01316A07 Black Primer 16 12 Flat
112934562 K01317A07 Ruddy Brown Primer 16 12 Flat
Size Net Wt.
Item No. Mfr. No. Color (oz) (oz) Finish WARNING: This product contains chemicals known to the State of California to cause
112934496 A01110007 OSHA Red 16 12 Gloss cancer and birth defects or other reproductive harm. For more information, go to
112934498 A01210007 OSHA Orange 16 12 Gloss www.P65Warnings.ca.gov.
112934502 A01310007 OSHA Yellow 16 12 Gloss
112934506 A01470007 OSHA Green 16 12 Gloss
112934508 A01510007 OSHA Blue 16 12 Gloss
112934517 A01770007 OSHA Black 16 12 Gloss
112934518 A01800007 OSHA White 16 12 Gloss
112934497 A01150007 Zinger Pink 16 12 Gloss
112934493 A01005007 Bright Red 16 12 Gloss Rust Tough® Acrylic Alkyd Enamel
112934495 A01101007 Cherry Red 16 12 Gloss Features: Applications:
112934519 A01811007 Fluorescent Orange 16 12 Gloss • Premium rust and corrosion protection • For indoor and
112934499 A01212007 Implement Orange 16 12 Gloss • Direct-to-metal; no primer needed outdoor use
112934500 A01213007 Joy Orange 16 12 Gloss • One coat coverage • Ideal for small
112934503 A01319007 New Caterpillar Yellow 16 12 Gloss • High gloss finish touch-up jobs
112934504 A01321007 Old Caterpillar Yellow 16 12 Gloss • Dries to touch in 25 minutes; dries to handle • Aluminum
112934516 A01765007 Gold 16 12 Gloss in one hour • Handrails
112934507 A01485007 Ivy Green 16 12 Gloss • Superior appearance and color retention • Machinery
113286038 A01445007 Medium Green 16 12 Gloss • Acrylic enamels and primers are equipped • Metal doors
112934510 A01540007 Light Blue 16 12 Gloss with EZ TOUCH® fanspray nozzle • Metals
112934494 A01008007 Ford Blue 16 12 Gloss • Other colors available • Piping
• Steel
112934509 A01515007 Dark Blue 16 12 Gloss
• Wood
112934513 A01625007 Blue/Gray 16 12 Gloss
112934514 A01645007 Light Gray 16 12 Gloss Container: Spray, Aerosol
112934408 A00329007 Machinery Blue Gray (ASA-24) 16 12 Gloss
112934407 A00326007 Machinery Light Gray (ASA-61) 16 12 Gloss Net Dry
112934512 A01620007 Machinery Gray 16 12 Gloss Size Wt. Time
112934406 A00325007 Machinery Dark Gray (ASA-49) 16 12 Gloss Item No. Mfr. No. Color (oz) (oz) Finish (min)
112934511 A01615007 Medium Gray 16 12 Gloss 112934552 K00639007 OSHA Red 20 15 Gloss 25
112934515 A01760007 Aluminum 16 12 Gloss 112934551 K00559007 OSHA Orange 20 15 Gloss 25
112934525 A03727007 Black 16 12 Max-Flat 112934549 K00439007 OSHA Yellow 20 15 Gloss 25
112934524 A03725007 Black 16 12 Semi-Flat 112934547 K00249007 OSHA Blue 20 15 Gloss 25
112934501 A01305007 Light Beige 16 12 Gloss 112934550 K00479007 Industrial Yellow 20 15 Gloss 25
112934523 A03720007 White 16 12 Flat 112934557 K00839007 Machinery Light Gray (ASA-61) 20 15 Gloss 25
113420858 A00324007a High Heat Aluminum 16 12 Flat 112934558 K00879007 Machinery Dark Gray (ASA-49) 20 15 Gloss 25
112934410 A00340007 Gray Rust Control Primer 16 12 Flat 112934554 K00789007 Black 20 15 Flat 25
112934411 A00341007 Light Gray Sandable Primer 16 12 Flat 112934555 K00799007 Black 20 15 Gloss 25
112934409 A00339007 Red Oxide Rust Control Primer 16 12 Flat 112934559 K00929007 White 20 15 Gloss 25
112934412 A00342007 Red Oxide Sandable Primer 16 12 Flat 112934553 K00699007 Red Oxide Primer 20 15 Flat 30
112934556 K00829007 Gray Primer 20 15 Flat 30
a
Also available in black.
WARNING: This product contains chemicals known to the State of California to cause WARNING: This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information, go to cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 191
Industrial Chemicals & Coatings
Industrial Choice® 1600 System, Galvanizing High Performance V2100 System, Enamel Aerosol
Compound Aerosol
Features: Features:
• Contains a high zinc content in the dry film for galvanic protection • Maximum corrosion protection
• Excellent corrosion protection • Dries to touch in 20 minutes
• Great adhesion to galvanized metal • Resistant to chipping, cracking and peeling
• Fast drying • Higher paint solids for excellent coverage and superior gloss retention
• Ideal for touch-up repair of galvanized metal • Can be used on surfaces that reach temperatures up to 200 °F (93 °C)
• Can be used on surfaces that reach temperatures up to 200 °F (93 °C) • Recoat within one hour or after 24 hours
• For indoor and outdoor durability • Indoor and outdoor durability
• Recoat within one hour or after 24 hours • OSHA safety marking
Applications: • Storage tanks, handrails, piping, racks, conveyors, machinery,
• Bare sheet metal • Gutters Container: Aerosol equipment, doors and structural steel
• Production welds • Trailers Dry Time: 1 h • Indoor/outdoor
• Galvanized ducts • Fences Max. Temperature Rating: 200 °F • Tractors, trailers, farm implements, machinery and equipment
• USDA acceptable and Agriculture Canada approved
Net Wt.
Item No. Mfr. No. Color (oz)
100912082 1685830 Gray 12 Container: Spray, Aerosol
102400701 244305 Bright Gray 12
Dry Time: 2 h
Net Wt.
Item No. Mfr. No. Color Finish (oz)
100911969 V2124838 Safety Blue Gloss 15
100911971 V2133838 Safety Green Gloss 15
100911973 V2155838 Safety Orange Gloss 15
Industrial Choice® 1600 System, Enamel Aerosol 100911974 V2163838 Safety Red Gloss 15
Features: 100912104 V2143838 Safety Yellow Gloss 15
• Multi-purpose industrial spray paint for everyday industrial applications 100912108 V2164838 Bright Red Gloss 15
• Ultra-coverage formula provides maximum coverage - paint more area 100912122 209717 International Harvester Red Gloss 15
faster using fewer cans 100912107 V2156838 Equipment Orange Gloss 15
• 360° any angle spray allows you to spray in any direction 100912106 V2148838 Equipment Yellow Gloss 15
• Comfort tip reduces finger fatigue 100912105 V2147838 Industrial Yellow Gloss 15
• Dries to touch in 12 minutes 100912119 209714 John Deere Yellow Gloss 15
• High solids formula delivers complete, even coverage 100912102 V2134838 Bright Green Gloss 15
• Protects against chipping, cracking and peeling 100911972 V2137838 Dark Green Gloss 15
• Can be used on surfaces that reach temperatures up to 200 °F 100912103 V2138838 Hunter Green Gloss 15
• USDA acceptable
100911970 V2125838 Deep Blue Gloss 15
• Use for tools, ducts/vents,
ladders, cabinets, lockers, 100912101 V2123838 Light Blue Gloss 15
Container: Spray, Aerosol 100912112 V2175838 Chestnut Brown Gloss 15
furniture, stenciling
Dry Time: 1 h 100912111 V2171838 Tan Gloss 15
Max. Temperature Rating: 200 °F 100911977 V2179838 Black Gloss 15
100911976 V2178838 Black Flat 15
Size
Item No. Mfr. No. Color Finish (oz) 100911975 V2177838 Black Semi-Gloss 15
100912113 V2176838a Black Flat 15
100912037 1624830 OSHA Safety Blue Gloss 12
100912100 V2116838 Aluminum Flat 15
100912039 1633830 OSHA Safety Green Gloss 12
100911968 V2115838 Silver Aluminum Flat 14
100912043 1653830 OSHA Safety Orange Gloss 12
100912137 V2119838 Stainless Steel Flat 14
100912047 1670830 OSHA Safety Purple Gloss 12
100911979 V2183838 Light Machine Gray Gloss 15
100912044 1660830 OSHA Safety Red Gloss 12
100911981 V2187838 Dark Machine Gray Gloss 15
100912042 1644830 OSHA Safety Yellow Gloss 12
100912110 V2170838 Almond Gloss 15
100912065 214646 ANSI 49 Medium Gray Gloss 12
100912116 V2192838 White Gloss 15
100912046 1666830 Banner Red Gloss 12
100911982 V2190838 White Flat 15
100912045 1664830 Cherry Red Gloss 12
100912117 V2196838 Fleet White Gloss 15
100912080 1655830 Fluorescent Red-Orange Gloss 12
100911967 V2102838 Crystal Clear Gloss 14
100912079 1654830 Fluorescent Orange Gloss 12
100911978 V2182838 Gray Primer 15
100912041 1643830 School Bus Yellow Gloss 12
100912124 V2169838 Red Primer 15
100912077 1632830 Fluorescent Green Gloss 12
100912040 1638830 Hunter Green Gloss 12
a
High heat paint.
100912059 202211 Machine Green Gloss 12
100912036 1622830 Regal Blue Gloss 12
100912038 1626830 True Blue Gloss 12
100912050
100912053
1674830
1679830
Leather Brown
Black
Gloss
Gloss
12
12
Lower Storeroom Operating
100912052
100912051
1678830
1676830
Black
Black
Semi-Flat
Ultra-Flat
12
12
and Inventory Costs
100911964 1614830 Dull Aluminum Flat 12
100912061 202214 Machine Gray Gloss 12 Ask your Applied® representative about our
100912055 1686830 Universal Gray Gloss 12
100912056 1688830 Smoke Gray Gloss 12 Storeroom Services Program and how we
100912049
100911965
1672830
1692830
Almond
White
Gloss
Gloss
12
12
can help you efficiently identify,
100912057 1690830 White Flat 12 organize, optimize and manage
100912075 1681830 White Primer 12
100912035 1610830 Crystal Clear Gloss 12 your inventory.
100912074 1680830 Gray Primer 12
100912073 1667830 Red Primer 12
192 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Features: Features:
• Creates 2 to 3” wide marks • VOC compliant
• Resists early fading and chalking • Free of lead hazards
• Dries in under 5 minutes • Convenient Spray-Thru cap and nonclogging spray tip
• Guaranteed not to clog; convenient spray-through cap • Other colors available
• Meets USDA requirements for incidental food contact
Applications:
• Communication lines
• Electrical installations
• Athletic fields
Size Net Wt. • Utility marking
Item No. Mfr. No. Color (oz) (oz) Container • Surveys
102080680 V2344838 Hi-Visibility Yellow 20 15 Aerosol • Construction
100912469 V2355838 Fluorescent Orange 20 15 Aerosol • Excavation
100912470 V2358838 Fluorescent Red-Orange 20 15 Aerosol • Other ground marking Container: Aerosol
Net Wt.
Item No. Mfr. No. Color Finish (oz)
100911990 V2402830 Black Gloss 10 Line-Up® Pavement Striping Paint
100911999 V2412830 Aluminum Gloss 10
100912001 V2414830 Orange Gloss 10
100912000 V2413830 Machine Gray Gloss 10 Features:
100911992 V2404830 Black Flat 10 • Fast drying
100911993 V2405830 White Flat 10 • Long-lasting durability on outdoor pavement and indoor surfaces
100911991 V2403830 White Gloss 10 • Non-clogging spray tip
100911997 V2410830 Green Gloss 10
100911996 V2409830 Yellow Gloss 10
100911995 V2408830 Blue Gloss 10
100911994 V2407830 Red Gloss 10 Container: Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 193
Industrial Chemicals & Coatings
Features:
• High solids formula for bold, bright, Features:
visible markings • Marks more linear feet than other brands
• Penetrates and adheres to hot surfaces • Precision tip – virtually no overspray
• Best Resistance against fading and chalking Container: Spray, Aerosol
• Convenient Spray-Thru cap and nonclogging
• Guaranteed not to clog Dry Time: 5 min
spray tip
• Dries in under 5 minutes Durability: 1 to 3 months (undisturbed)
• Other colors available
Size Net Wt.
Container: Spray, Aerosol Item No. Mfr. No. Color (oz) (oz)
Finish: Flat 100912009 1834838 Safety Green 20 17
100912032 203038 Safety Red 20 17
Net
Size Wt. 100912025 203031 Caution Blue 20 17
Item No. Mfr. No. Color (oz) (oz) 100912028 203034 Hi-Visibility Yellow 20 17
112934520 A03611007 APWA Red 20 17 100912034 205176 Fluorescent Blue 20 17
112936066 A03731007 APWA Orange 20 17 100912026 203032 Fluorescent Green 20 17
113286037 A03702007 Fluorescent Orange 20 17 100912030 203036 Fluorescent Orange 20 17
112934529 A03823007 APWA Safety Yellow 20 17 100912010 1861838 Fluorescent Pink 20 17
112934528 A03821007 Hi-Visibility Yellow 20 17 100912033 203039 White 20 17
112934521 A03621007 APWA Blue 20 17
112934530 A03900007 APWA White 20 17
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
High Performance 2300 System Inverted Striping Paint Aerosol
Features:
• Coats 400 to 800 linear ft on 4” or 2” stripe
• Bright, crisp lines
• Less than 10 minutes to tack-free
• Guaranteed not to clog
• Recoat anytime
• For indoor or outdoor use Container: Aerosol
• Aisles, lift truck routes, pallet positions, hazardous areas, Handling Dry Time: 30 min
commercial parking lots, stadiums, athletic facilities Max. Temperature Rating: 200 °F
• Use with 2395000 Striping Machine Durability: Long Lasting
Net Wt.
Item No. Mfr. No. Color (oz)
102073183 2364838 Red 18
Industrial Choice® M1600 System 102074850 2348838 Yellow 18
Solvent-Based Precision Line 102079616 2326838 Blue 18
Marking Paint 102081399 2391838 White 18
A high gloss, 100% acrylic, waterborne, corrosion-resistant coating designed for new construction or maintenance
Features: use. This product can be used directly over prepared substrates.
• Marks more linear feet than other brands
• Precision tip – virtually no overspray Features:
• Best Resistance against fading and chalking • VOC compliant everywhere
• Guaranteed not to clog • Corrosion resistant
• Dries in under 5 minutes • Adheres to new and clean metal without a primer
• Outstanding early moisture resistance and adhesion
• Other colors available
Container: Spray, Aerosol Container: Can
Dry Time: 5 min Finish: Gloss
Durability: 3 to 6 months (undisturbed)
Size
Net Item No. Mfr. No. Color (gal)
Size Wt. 101913012 K11001011 OSHA Safety Red 1
Item No. Mfr. No. Color (oz) (oz) 101925555 K11004991 OSHA Safety Orange 1
100912023 203029 Safety Red 20 17 101913014 K11029101 OSHA Safety Yellow 1
100912016 203022 Caution Blue 20 17 101912857 K11018001 OSHA Safety Blue 1
100912019 203025 Hi-Visibility Yellow 20 17 101913013 K11003271 Light Machinery Gray (ANSI-61) 1
100912017 203023 Fluorescent Green 20 17 101924170 K11001131 Black 1
100912021 203027 Fluorescent Orange 20 17 101914771 K11004041 White 1
100912004 1661838 Fluorescent Pink 20 17 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or
100912024 203030 White 20 17 other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
194 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
3800 System
5200 System
9100 System
Concrete Saver Floor Coatings
Sierra S60 Floor Coatings
High Performance V7400 High Performance® 7400, System 450 VOC Alkyd Enamel
System DTM Alkyd Enamel
A lower VOC version of Rust-Oleum’s original
direct-to-metal (DTM) rust preventative coating that
provides metal surfaces with the ultimate protection
from the ravages of rust corrosion.
Features:
• Use direct to metal or prime first for best results
• Protects against general weathering, salt air, mild chemical Features:
spills, fumes, oil and grease • The original rust-preventative coating formulated to protect metal surfaces
• Excellent coverage in one coat from rust and corrosion
• High solids content provides better coverage • Special polyamide-modified alkyd for maximum performance
• High gloss, durable finish provides good color • Protects against mild chemical spills, fumes, oil and grease
and gloss retention • High paint solids
• Superior resistance to chipping, cracking and peeling • Resists chipping, cracking and peeling
• Other colors available • Superior gloss and color retention
• Single-component, easy-to-use coating for general plant • Excellent hiding power
maintenance, including machinery, equipment, pipes, • Smooth, durable, long-lasting finish
handrails, trim, doors, new construction, OEM and more • Indoor/outdoor
• USDA acceptable and Agriculture Canada approved • Pipes, equipment, metal cabinets and lockers, railings, trim, doors
and gates, vents, outdoor signage
• USDA acceptable and Agriculture Canada approved
Container: Can
Dry Time: 8 h Container: Can
Recommended Primer: V7400 System Primers Dry Time: 9 h
Max. Temperature Rating: 212 °F
Size
Size Item No. Mfr. No. Color Finish (gal)
Item No. Mfr. No. Color Finish (gal) 100912294 964402 Safety Red High Gloss 1
101324935 245403 Black High Gloss 1 100912293 956402 Safety Orange High Gloss 1
101417528 245443 Navy Gray Gloss 1 100912292 944402 Safety Yellow High Gloss 1
101417981 245474 Safety Blue Gloss 1 100912270 925402 Safety Blue High Gloss 1
101417749 245478 Safety Red Gloss 1 100912238 906402 Silver Gray Gloss 1
101418091 245479 Safety Yellow Gloss 1 100912225 412402 Black Flat 1
101419809 245484 Silver Gray Gloss 1 100912228 634402 Black High Gloss 1
101417660 245406 White Gloss 1 100912281 2766402 White High Gloss 1
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 195
Industrial Chemicals & Coatings
High Performance 9100 System High Performance 3800 System DTM Acrylic Enamel
DTM Epoxy Mastic Features:
Versatile, two-component epoxy system is perfect for • Fast dry, water-based finish
direct to metal (DTM), direct to tightly adhered rust, concrete floors, pools and more. • Contains less than 250 g/L VOC for indoor or outdoor
This is a two-part system. Order base and activator separately. Combined to make direct-to-metal (DTM) applications
two activated gallons. Mixing pail required (not supplied). • Delivers excellent corrosion resistance and will protect
surfaces exposed to mild to moderate environments
Features: • Excellent corrosion resistance
• Minimizes prep: Apply direct to metal (DTM) and tightly • Direct-to-metal (DTM) coating – no primer required;
adhered rust good adhesion and excellent one-coat coverage,
• Self-priming: Single coat provides service life equal to multiple including smooth surfaces
coats of competitive epoxy • 250 g/L VOCs, water-based
• Maximum corrosion protection • Applies with very little brush drag; lays out evenly when
• Superior long-term solvent, chemical and abrasion resistance applied by roller
• Outstanding impact resistance • Two-year rust-proof guarantee – maximum
• Convenient 1:1 mixing ratio of base and activator corrosion protection
• Versatile base formula – Works with all activators (standard, • Meets USDA requirements for incidental food contact;
immersion, low temp or fast cure) at VOC less than 340 g/l or accepted for use in federally registered Canadian
less than 250 g/l food facilities
• Great for concrete floors (factory, warehouse, work shop, utility • Apply when temps are 50 to 100 °F and relative
areas, service garages, steel, equipment, tanks, non-potable humidity is less than 95%
storage and more)
• USDA acceptable and Agriculture Canada approved Finish: Gloss
Container: Can
Use With: Dry Time: 15 min
• 205015 Low VOC Standard Activator
• 214430 Low VOC Immersion Activator Size
• 214432 Low VOC Fast Cure Activator Item No. Mfr. No. Color (gal)
• 9101402 Standard Activator 114672602 314410 Safety Red 1
• 9103402 Low VOC Low Temperature Activator 114672590 314409 Safety Yellow 1
114672585 314209 Safety Blue 1
Container: Can 114672587 314388 Navy Blue 1
Dry Time: 12 h 114672592 315506 Silver Gray 1
Low VOC: Yes 114672586 314387 Black 1
Max. Temperature Rating: 300 °F 114672588 314389 White 1
Base
Size
Item No. Mfr. No. Color (gal)
100912324 9192402 White 1
100912321 9179402 Black 1
100912322 9182402 Silver Gray 1
100912323 9186402 Navy Gray 1
100912320 9171402 Dunes Tan 1
100912376 9144402 Safety Yellow 1
Use with all 9100 and V9100 activators. Select activator by VOC level.
Features:
• Multi-purpose low VOC DTM acrylic enamel coating with
minimal odor
High Performance 9100 System • Fast drying
DTM Epoxy Activator • Low VOC
• Resists chalking and fading
Features: • Withstands mild chemical fumes and spills
• For use with 9100 System Base or • For indoor or outdoor use in mild to moderate industrial
Steel-Tech Epoxy environments
• Direct-to-metal (DTM) self-priming • Use on steel, masonry, wood and more
formula – adheres to a variety of substrates <250 • USDA acceptable and Agriculture Canada approved
• Superior long-term resistance to solvents, V
chemicals, abrasion and impact Applications:
• Convenient 1:1 mixing ratio – no • Food and beverage
measuring required • Pharmaceutical
• Two-year rust-proof guarantee – maximum • Restaurants
corrosion protection • Schools
• Meets USDA requirements for incidental • Offices
food contact; accepted for use in federally • Prisons Container: Can
registered Canadian food facilities; <340 VOCs Dry Time: 4 h
Low VOC: Yes
Size Dry Time Low VOC Max. Temperature Rating: 200 °F
Item No. Mfr. No. Activator Type (gal) (h) (g/l)
100912328 9101402 Standard 1 16 340 Size
100912327 9104402 Fast Cure 1 4 340 Item No. Mfr. No. Color Finish (gal)
100912325 9102402 Immersion 1 16 340 100912203 5288402 Machine Tool Gray Gloss 1
100912354 205015 Low VOC Standard 1 16 250 100912199 5278402 Black Flat 1
100912356 214432 Low VOC Fast Cure 1 12 250 100912206 5292402 White Gloss 1
100912355 214430 Low VOC Immersion 1 12 250 100912248 5244402 Safety Yellow Gloss 1
196 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Paint Brush Remover & Prep
The preferred solution for removal of DYKEM® Layout Fluids. DYKEM®
REMOVER & PREP is non-chlorinated and leaves no residue, preparing the
part for the next production.
Features:
• Removes layout fluids from metal surfaces
• Dries in minutes
• Does not contain toluene or chlorinated solvents
• Leaves no residue
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 197
Industrial Chemicals & Coatings
Features: Features:
• Unique paint formula resists spreading and dries quickly through oily surfaces to • The versatile chisel tip can make both fine or broad marks for flexible marking needs
leave precise, permanent marks • Smear- and water-resistant industrial ink allows for long-lasting marks
• Xylene-free paint reduces user health risks • Heavy-duty metal barrel contains extra-large ink supply for longer marking life
• Durable metal barrel and nib reduce breakage for longer marking life • Xylene-free ink reduces user health risks
• Made in USA Pkg. Qty.: 12
Tip Size: 1/8 in to 1/4 in
Item No. Mfr. No. Color Pkg. Qty.: 12
111792086 96960 White Item No. Mfr. No. Color
111792087 96961 Yellow
111791966 96222 Red
111792088 96962 Red
111791967 96223 Black
111792089 96963 Black
111792090 96964 Orange
111792091 96965 Blue
111792092 96966 Green
Features:
• Multi-use chisel tip creates both fine and broad marks
• Durable tip and barrel for use in industrial environments
Features: • Clip-cap for convenient pocket storage and prevents rolling on the jobsite
• Fast-drying paint designed for long-lasting, wear- and weather-resistant marking • Fast drying, wear- and water-resistant formula offers long-lasting, visible marks
• Performance of solvent-based LPM • Additional colors available
• Easier disposal and shipping Tip Size: 1/16 in to 3/16 in
• Low odor, low VOC and non-flammable Pkg. Qty.: 12
• Perfect for climate-controlled factories and “close” quarters
Dry Time: 1 to 2 min Item No. Mfr. No. Color
111791984 96528 Red
Container 111791985 96529 Black
Item No. Mfr. No. Size 111791986 96530 Blue
117720606 97410 Pink 111791987 96531 Green
117720290 97402 Red
117720292 97404 Orange
117720289 97401 Yellow
117720604 97406 Green
117720603 97405 Blue
117720605 97407 Purple
117720291 97403 Black
117720288 97400 White
B® Paintstik® – Multi-Purpose
Permanent Solid Paint Crayon
Features:
DURA-INK® 15 – Permanent Ink • Real paint for long-lasting, highly visible marks
Marker with Fine Bullet Tip • Superior marking on rough, rusty or dirty surfaces
• Solid paint marker eliminates replacement tips, sharpening
or priming, increasing productivity
• Made in USA
Features: • Additional colors available
• Industrial strength ink is smear and water resistant for longer lasting marks Length: 4 3/4 in
• Extra tough tip will not spread or mush Dia.: 11/16 in
• Durable plastic barrel reduces breakage on the jobsite or in-plant Pkg. Qty.: 12
• Xylene-free ink reduces user health risks Tip Size: 1/16 in
Pkg. Qty.: 12 Item No. Mfr. No. Color
111791574 80220 White
Item No. Mfr. No. Color 111966458 80221 Yellow
111791933 96022 Red 111966459 80222 Red
111791934 96023 Black 111966460 80223 Black
111791935 96025 Blue 111791576 80224 Orange
111791936 96026 Green 111966461 80225 Blue
111791937 96027 Silver 111791577 80226 Green
198 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Quik Stik® – Fast-Drying Solid
Paint in Twist-Up Holder
BRITE-MARK® Paint Markers
Valve-actuated paint markers write permanent, bold,
nonskip markings on almost any surface.
Features:
Features:
• Fast drying, vibrant paint marks dry in five to seven minutes
• Quick drying, oil-based paint
• Marks on virtually any surface: wet, smooth, rough or hot
• Withstands indoor and outdoor conditions
• Airtight, self-storing cap keeps the marker clean and fresh between uses
• Does not fade or lose its capacity
• Weather- and UV-resistant paint for long-lasting marks
• Unique valve actuated tip prevents drying out of tip
• Xylene-free paint reduces user health risks
Pkg. Qty.: 12 • Non-xylene based formula
• Made in USA
• For marking and identifying on a wide variety of
Item No. Mfr. No. Color surfaces and materials
111791509 61049 Red • Complies with RoHS restrictions on the use of certain
111791512 61053 Yellow hazardous substances in electrical
and electronic equipment Dry Time: 35 s
111791557 61069 Green Pkg. Qty.: 12
111791558 61070 Blue
111791510 61050 Black Item No. Mfr. No. Color
111791511 61051 White 102155952 84001 Blue
102155236 84004 Yellow
102144735 84005 Orange
Security Check Paint Marker 102157724 84002 Black
102143485 84003 White
Perfect for indicating tampering or loosening of bolts or parts, Markal Security Check 102167625 84006 Red
paint provides an easy-to-read visual indication. The non-drip formula easily applies 102144929 84007 Green
across bolt threads and cracks when loosened.
Features:
• Paint marks crack for visual indication of loosening or tampering of bolts and parts
• Dry to touch: 15 minutes; full cure: 4 days
• Comes in eight high visibility colors High Purity 44 Marker
• Larger volume tube holds 70% more paint than leading competitor
• Marking range: -4 °F to 158 °F (20 °C to 70 °C )
• Mark temperature resistance: 392 °F (200 °C)
• Additional colors available Dry Time: 15 min Features:
• Marking on stainless steel or any surface where degradation, contamination or other
Size
Item No. Mfr. No. Color (mL) Packing Type
adverse effects are a concern
• Contains trace amounts of halogens and low melting metals, and is low in chlorides
113481282 96670 Red 50 Tube • Designed with a valve action mechanism that allows the marker tip to be re-inked,
113481281 96669 Yellow 50 Tube even when the cap is left off
113481283 96671 Blue 50 Tube • Marker barrel is threaded so it can be secured in a jig or apparatus for continuous
113481286 96674 Orange 50 Tube marking applications
• Unique cap design features a clip that prevents the marker from rolling and can easily
be secured to a clip board or in your pocket
Tempilstik® – Fast, Accurate • Ideal for welding, aircraft industries, marine industries, power plants, automotive
Surface Temperature Indicator plants and oil and natural gas refineries
• Paint will not contaminate or adversely affect surface being marked
• Meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and
the U.S. Energy Research and Development Administration (nuclear grade)
Features:
• Stick instantly melts at designated temperature for easy and immediate Item No. Mfr. No. Color
visual inspection 102201319 44404 Black
• Calibration-free with 100% reliability
• Imprinted part number, temperature and lot code across entire stick
for improved traceability
• Accurate to within +/-1% of Fahrenheit rated temperature
• Made in USA
• Complies with preheat temperature requirements of AWS D1.1,
ASME Code Sec. I, III and VIII, ANSI/ASME Code B31.1 and B31.3 Pkg. Qty.: 12
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 199
Industrial Chemicals & Coatings
Cross Check™ Torque Seal®
Tamperproof Indicator Paste SP603 Blue Layout Dye
DYKEM® Cross Check™ provides a convenient visual method for identification of
vibratory loosening or tampering in nuts, bolts, fasteners and assemblies. Provides Prevents metal glare when marking dies and templates.
warranty protection against tampering. Marks will be easily broken if parts are
tampered with or become loose. Highly visible marks. Orange, green, red, yellow and Features:
blue fluoresce under black/UV light. Excellent adhesion to metal and other substrates. • Fast drying • EZ Touch® Fanspray® Nozzle
Features: • Nonflaking • Does not contain any greenhouse
• Tamperproof torque mark • Nonetching gas propellants
• Safe for most surfaces • Will not peel • Pattern making
• Highly visible • Heat-resistant • Tool and die
• Excellent adhesion • Non-corrosive • Machining
• Visually detects loose nuts and bolts • Adheres to metal or glass • VOC compliant
• Provides warranty protection
• Boeing specification: BMS8-45 type II Container: Aerosol
• Dry to touch/handle in 30 to 40 minutes
• 80% curing occurs between 48 to 72 hours; Size Net Wt.
completion of curing takes place between seven to Item No. Mfr. No. (oz) (oz)
ten days 112934639 SC0603000 16 12
• Exposing to elevated temperature or blowing hot air
WARNING: This product contains chemicals known to the State of California to
can speed up the drying/curing process
cause cancer and birth defects or other reproductive harm. For more information, go
Dry Time: 1 h to www.P65Warnings.ca.gov.
Size
Item No. Mfr. No. Color (oz)
112711385 83320 Pink 1
101400120 83316a Red 1
101374080 83314a Orange 1
101393994 83317a Yellow 1 SP606 Layout Dye Remover
101405788 83315a Green 1
101406820 83318a Blue 1
112801246 83321 Gray 1 Specially formulated to remove layout fluids quickly.
112700228 83319 White 1
a
Fluoresce under black/UV light.
Features:
• Removes old inks, oils and greases
• Fast acting
Hi-Spot™ Locator • Leaves no residue
• No chlorinated solvents
Features: Color: Clear
• Intensely blue, soft, uniform paste that spreads easily and evenly to show Container: Aerosol
high spots on bearings
• Most valuable when used on flat bearing surfaces of lathes, planers, Size Net Wt.
milling machines, etc. Item No. Mfr. No. (oz) (oz)
• Thin coating may be left on the surface day in and day out, and will not dry
112934640 SC0606000 16 12.75
• Film remains “wet” and “transferable” and in condition for months
• No nightly clean up or morning re-bluing is necessary WARNING: This product contains chemicals known to the State of California to
• Non-drying cause cancer and birth defects or other reproductive harm. For more information, go
• Non-hardening to www.P65Warnings.ca.gov.
• Transfers from one surface to another
• Saves valuable time and money in Color: Blue
surface scraping work Container: Tube
Size
Item No. Mfr. No. (oz)
101942825 83307 0.55 WL740 Zinc-Rich Cold
Galvanizing Compound
200 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
High performance coating of 93% pure zinc that electrochemically bonds with ferrous
Features: metals to form a galvanic cell.
• Excellent touch-up for repair of galvanized substrates
• Produces a dry coating with the bright finish of hot dip galvanizing Features:
• Dries to touch in 30 minutes • Actively fights rust and corrosion
• May be recoated after 2 to 16 hours, or after 36 hours • Protects base metal even when scratched or abraded
• Does not contain any greenhouse gas propellants • Fast drying; dries to the touch in 20 minutes
• 69% zinc in dry film • Excellent weldability
• VOC compliant • Aerosol product is extremely flammable
• Meets ASTM A780-01 • Read and observe the special usage warning on the label
• Do not apply while equipment is energized
• MIL-P-46105 compliant
Container: Aerosol • MIL-P-21035B compliant
• MIL-P-26915 compliant
Size Net Wt. • Meets ASTM 780A
Item No. Mfr. No. Color (oz) (oz) Finish
112934652 SC0739000 Aluminum 16 14 Gloss Applications:
WARNING: This product contains chemicals known to the State of California to • An excellent touch-up for • Railings
cause cancer and birth defects or other reproductive harm. For more information, damaged galvanized coatings • Grates
go to www.P65Warnings.ca.gov. • Threads • Electrical poles
• Exposed edges • Breaker housings
• Fasteners • Signs
• Conduits • Doors
• Strapping • Waste containers
• Welds • Catwalks
Cold Galvanize Corrosion Inhibitor • Fencing
Container: Aerosol
Commonly used as a flash rust preventative on welded areas. Works as a
paint primer over rust. Size Net Wt.
Item No. Mfr. No. (oz) (oz)
Features: 101852022 18412 16 13
• Zinc rich galvanized coating - zinc purity: 99+%
• Three-year protectant WARNING: This product can expose you to chemicals, including toluene, which is
• Flexible coating known to the State of California to cause birth defects or other reporoductive harm.
• Will not yellow, crack or peel For more information go to www.P65Warnings.ca.gov.
• Electrochemically protects bare metal
• Water temperature up to 212 °F (100 °C)
• Dry heat up to 750 °F (401 °C)
• VOC compliant in all 50 states
• Conforms to military standard MIL-P-21035
• Meets ASTM A-780 standards
Applications:
• Cable connections • Outdoor connections
• Chains • Pipes
• Gears • Pumps
• Hose assemblies • Storage tanks
• Machinery • Terminals
• Nuts and bolts Bright Zinc-It® Instant
Cold Galvanize
Size Net Wt.
Item No. Mfr. No. (oz) (oz) Inhibits corrosion and provides a high shine, hot dip, galvanized, bright metallic finish.
102094972 00516 16 14
Features:
• Dries to touch in 20 minutes
• Sacrificial zinc coating protects ferrous metals from oxidizing
Applications:
Get access to: • An excellent touch-up for • Railings
damaged galvanized coatings • Grates
• Order History • Threads • Electrical poles
• Exposed edges • Breaker housings
• List Management • Fasteners • Signs
• Auto-Replenishment • Conduits
• Strapping
• Doors
• Waste containers
• My Applied® Catalog • Welds • Catwalks
• Fencing
• Frequent & Recent Purchases Container: Aerosol
Dry Time: 20 min
• Multiple Level Purchase Approvals
Size Net Wt.
Check out Item No.
101843074
Mfr. No.
18414
(oz)
16
(oz)
13
Applied.com/register today! WARNING: This product can expose you to chemicals, including toluene, which is
known to the State of California to cause birth defects or other reporoductive harm.
For more information go to www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 201
Industrial Chemicals & Coatings
EL600, EL601 and EL609 SmartWasher® FL-3 OzzyMat™
Insulating Varnish Single Layer Fluid Activation Mat
Contains the microbes that clean the solution and remove dirt and residue. Works with
Sprayon EL Insulating Varnish is a coating with excellent insulating properties for all grades of fluid. For use in the CRC SmartWasher® Parts Washing System.
insulating electrical and electronic work. Excellent adhesion to metals, windings and
coils. Air dries faster than most insulating materials. Protects surface against oils,
moisture, acid and alkalis. Has excellent flexibility and water resistance.
Features:
• Filters must be used for proper cleaning and
operation of the SmartWasher® System
Features:
• Meets class F requirements
• Air dries in 10 minutes
• Available in red, green and clear Item No. Mfr. No. Pkg. Qty.
• Dielectric strength varies by color 101852024 14149 6
SmartWasher® is a registered trademark of ChemFree® Corporation.
WARNING: This product contains chemicals known to the State of California to Features:
cause cancer and birth defects or other reproductive harm. For more information, go • Biodegradable
to www.P65Warnings.ca.gov. • pH neutral
• Noncorrosive
• Minimal VOCs
• Nonflammable
• NSF A1 registered
• CARB: Complies with VOC regulations as detailed by the
SP-400™ Corrosion Inhibitor California Air Resource Board
• OTC: Complies with VOC regulations as detailed by the Ozone
Transport Commission
Long-term, indoor/outdoor corrosion inhibitor for machined surfaces and assemblies • LADCO: Complies with VOC regulations as detailed by the Lake
subjected to long periods of storage or adverse shipping conditions. The easily Michigan Air Directors Consortium
removable film provides protection for all equipment subject to heat, humidity, • Complies with RoHS restrictions on the use of certain hazardous
chemicals or severely corrosive atmospheres. substances in electrical and electronic equipment
• SCAQMD: Meets or exceeds applicable air emissions
Features: standards established by the California South Coast Air Quality
• Firm, waxy film is highly resistant to humidity and salt spray and Management District
never becomes brittle • Recognized by the U.S. Environmental Protection Agency
• Long-term protection (up to two years outdoors) for all metals during Design for the Environment (DfE) Formulator Initiative (part
shipment or extended storage number 14148 only)
• Waxy film seals out moisture completely
• Aerosol product is extremely flammable Applications:
• Read and observe the special usage warning on the label • Parts cleaning in preventative mainenance and repair facilities,
• Do not apply while equipment is energized industrial manufacturing plants, automotive repair shops and
• MIL-C-16173 grade 4, class I compliant metal fabricators
Applications: Size
• Motors Item No. Mfr. No. Type (gal) Container
• Shafts 101843957 14148 Heavy Duty 5 Jug
• Equipment exposed to elements 101851512 14156 Degreasing 5 Jug
• Outdoor storage of raw materials 101844411 14158a Select Metals 5 Jug
• Finished stock 101850429 14159 Low Foam 5 Jug
112060696 14720 Truck Grade 5 Jug
Net Wt. 112076267 14721 Parts/Brake 5 Jug
Item No. Mfr. No. Size (oz) Container
112076268 14722a Aircraft & Weapons 5 Jug
101850934 03282* 16 oz 10 Aerosol 115656416 1751304 High Performance 5 Jug
101849913 03286 5 gal — Pail
SmartWasher® is a registered trademark of ChemFree® Corporation.
* WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. a
MIL-PRF-29602A.
Features: Applications:
• Flash rust resistant • Diesel fluid, soot and grime
• Water based • Engine parts, machinery and equipment
• pH neutral • Burnt-on carbon
• GHS non-hazardous • Metal surfaces
• 50 state VOC compliant • Tacky, heavy-duty greases Flash Point: 200 °F
• Meets NSF A1 • Open gear greases
• Leaves no residue • Drive shaft couplings Size
Item No. Mfr. No. Color (gal) Container
• Formulated eco-friendly, non-polluting
• Non-corrosive, non-flammable and non-irritating 115656416 1751304 HP Clear 5 Jug
202 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
SmartWasher® FL-4 OzzyMat™ SmartWasher® SW-28
Multi-Layer Fluid Activation Mat SuperSink Parts Washer
Features: Alternative to conventional petroleum-based solvent, parts washing systems. Has a
• Multi-layer filter used in the bioremediation large 8” H x 41” W x 24” D sink that removes for easy cleaning, and a side-mounted
cleaning process of a SmartWasher® Parts control panel. Perfect for washing large or multiple parts.
Cleaner Features:
• Special micro impregnated filter • Self-contained, self-cleaning parts washing system that is
• Remove dirt and residue particles down to safe, nontoxic and generates no hazardous waste
50 microns • Uses bioremediation – the accelerated breakdown of organic
• Three filters in one for heavy compounds, such as grease, grime, varnish, oil, carbon and
use applications other heavy industrial soils through the use of nonpathogenic
• Peel back and remove each layer as it becomes clogged to reveal a fresh layer microbes
• Extends the working life of filter • Microbes recirculate through the unit and literally eat their
• Works with all grades of cleaning solution way through soils, converting them into harmless water and
• Non-hazardous, non-flammable carbon dioxide (CO2)
• VOC free • Solution remains clean and usable
Pkg. Qty.: 12 • Disposal becomes a non-issue as hazardous waste streams are eliminated
• Unit requires 25 gallons of SmartWasher® fluid and one filter
Item No. Mfr. No. Use With • Extra large work surface
101851942 14124 SmartWasher® • 500 lbs. load capacity
SmartWasher® is a registered trademark of ChemFree® Corporation. • Second work station can easily by added so two people can work at one time
Item No. Mfr. No.
102189373 14144
SmartWasher® is a registered trademark of ChemFree® Corporation.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 203
Industrial Chemicals & Coatings
SmartWasher® SW-437 Mobile
Heavyweight Parts Washer Kit
Features:
• Self-contained, self-cleaning parts washing system that is safe, nontoxic and EL703 Electric Motor Degreaser
generates no hazardous waste
• Uses bioremediation – the accelerated breakdown of organic compounds, such as Features:
grease, grime, varnish, oil, carbon and other heavy industrial soils through the use • A chlorinated solvent that penetrates quickly
of nonpathogenic microbes to easily lift dirt, grease and tars
• Microbes recirculate through the unit and literally eat their way through soils, • Non-ozone depleting formula
converting them into harmless water and carbon dioxide (CO2) • Requires no washing or flushing; simply
• Solution remains clean and usable spray on and wipe off
• Disposal becomes a non-issue as hazardous waste streams are eliminated • Nonflammable, noncorrosive, nonstaining
• Unit requires 25 gallons of SmartWasher® fluid and one filter • Will not harm insulators or leave a residue
• 1,000 lbs. load capacity • NSF reg. # 118283
• K2 rated
Includes:
• (1) SW-37 Mobile Heavyweight Parts Washer (part no. 14162) Container: Aerosol
• (5) SW-4 OzzyJuice® Heavy Duty Degreasing Solutions (part no. 14148) Dielectric Strength: 39.5 KV
• (1) FL-4 OzzyMatTM Multi-Layer Filter (part no. 14124)
• Flexible nozzle and brush Size Net Wt.
Item No. Mfr. No. (oz) (oz)
101557716 S00703000 20 19
Item No. Mfr. No.
WARNING: This product contains a chemical(s) known
112076272 14741 to the State of California to cause cancer. For more
SmartWasher® is a registered trademark of ChemFree® Corporation. information, go to www.P65Warnings.ca.gov.
EL2302 Electrical Contact Cleaner EL749 Electrical Degreaser EL848 Flash Free Electric Degreaser
Features:
Features:
• Penetrates easily
• Heavy-duty degreaser and Features: • Evaporates quickly
quick-drying cleaner • Leaves no residue • Leaves no residue
• Leaves no residue • Alternative to 1, 1, 1-Trichloroethane • Nonconductive
• Fast evaporating • Designed for fast, effective removal of • Nonflammable
• Ideal for sensitive equipment and dirt, oil, grease, wax and tar on electrical • Dielectric strength 37,000 V
precision instruments equipment • High delivery nozzle
• TF113 alternative • No CFCs or HCFCs • NSF reg. # 115070, K2 rated
• Safe on most plastics • Fast evaporating
• For use on nonenergized equipment, • NSF reg. # 115068, K2 rated
motors, gears, brakes and air tools SC0848000
• NSF reg. # 115091
• K2 rated Applications: Applications:
• Electric motors • Motors • Gears
• Radar equipment • Chains • Locks
Applications:
• Gears • Relays • Brakes
• Printed circuits
• Brakes • Portable tools • Radar equipment
• Office machines
• Clutches • Cables
• Relays
• Generators
• Switches
• Air tools Includes:
• Computer systems
• Molds • Extension tube on aerosols
Container: Aerosol
Container: Spray, Aerosol
Size Net Wt.
Size Net Wt. Size Net Wt. Item No. Mfr. No. (oz) (oz)
Item No. Mfr. No. (oz) (oz) Item No. Mfr. No. (oz) (oz) Container 112934591 SC0848000 16 13
112934588 SC2302000 16 11 112934590 SC0749000 20 15 Aerosol 112934592 SC0848T00 20 17
WARNING: This product contains a chemical known WARNING: This product contains chemicals known to WARNING: This product contains chemicals known to
to the State of California to cause birth defects or other the State of California to cause cancer and birth defects the State of California to cause cancer and birth defects
reproductive harm. For more information, go to or other reproductive harm. For more information, go to or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
204 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Electronic Component Cleaner
Aggressive precision cleaner for use in industrial, electrical and aviation applications. Its high purity, fast-penetrating
formula aggressively dissolves grease, dust, lint, dirt, oils, polar soils and other contaminants from most nonplastic
EL2001 Electronic Contact surfaces. It evaporates very rapidly and leaves no residue.
Cleaner & Protectant Features:
• Removes flux and polar soils
Features: • No flash or fire point
• Makes high-precision electrical equipment • Nonconductive
perform like new • Noncorrosive
• Cleans and penetrates surface pores; leaves • SNAP: Meets the Environmental Protection Agency’s Significant New Alternatives Policy requirements as
a fine, microscopic, corrosion-proof film a suitable aerosol substitute for ozone-depleting substances
• Removes contaminants, such as grease, • OTC: Complies with VOC regulations as detailed by the Ozone Transport Commission
dirt, dust and oxidation residue; eliminates • LADCO: Complies with VOC regulations as detailed by the Lake Michigan Air Directors Consortium
related humming noise • Electronic component cleaner contains HCFC (14 lb), which has use restrictions and may only be sold to
• NSF reg. # 115081, K2 rated commercial users for applications consistent with the regulation
• Complies with RoHS restrictions on the use of certain hazardous substances in
Container: Aerosol electrical and electronic equipment
Dielectric Strength: 36.7 KV • NSF K2 registered Container: Aerosol
Size Size Net Wt.
Item No. Mfr. No. (oz) Item No. Mfr. No. (oz) (oz)
101704174 S02001000 16 101844402 03200 16 13
WARNING: This product contains chemicals known to Restricted from sale or use in California.
the State of California to cause cancer and birth defects
or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 205
Industrial Chemicals & Coatings
Contact Cleaner 2000® VC NT™ Precision Cleaner
Precision Cleaner
Aggressive precision cleaner designed to remove contaminants from Precision cleaner designed to remove dirt, light oils and other contaminants from
electronic equipment. It provides an effective alternative to HCFC electronic equipment. Alternative to HCFC 141-b based cleaner when sensitive plastics
141b-based cleaners when sensitive plastics are not a concern. are not a concern.
Features: Features:
• No flash point • Nonflammable
• Rapid evaporation, leaves no residue • Evaporates quickly
• High purity formula – chemically stable and non-conductive • Leaves no residue
• SNAP: Meets the Environmental Protection Agency’s Significant New • OTC: Complies with VOC regulations as detailed by the
Alternatives Policy requirements as a suitable aerosol substitute for Ozone Transport Commission
ozone-depleting substances • LADCO: Complies with VOC regulations as detailed by the
• CARB: Complies with VOC regulations as detailed by the Lake Michigan Air Directors Consortium
California Air Resource Board • Complies with RoHS restrictions on the use of certain hazardous
• OTC: Complies with VOC regulations as detailed by the substances in electrical and electronic equipment
Ozone Transport Commission • Caution: test on plastics
• LADCO: Complies with VOC regulations as detailed by the • Regulatory compliant
Lake Michigan Air Directors Consortium • NSF K2 registered
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment Applications:
• NSF K2 registered for use in meat and poultry plants • Contacts
• VOC compliant in all 50 states • Metal switches
• Motors
Pkg. Qty.: 12 • Relays
• Generators
Size Net Wt. • Edge connectors
Item No. Mfr. No. (oz) (oz) Container • Buss bars
101462645 02240 16 13 Aerosol • Circuit breakers
• Scales and sensors
WARNING: Reproductive Harm - www.P65Warnings.ca.gov.
Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container
101844093 03205 16 12 Aerosol
Not for sale or use in California.
206 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
PF Precision Cleaner Contact Cleaner & Protectant
Innovative contact cleaner that offers strong cleaning on contacts, printed circuit High purity precision cleaner that penetrates surface pores, cleans away contaminants
boards and other electronic and electrical equipment. and leaves a fine, corrosion-resistant and lubricating film.
Features: Features:
• No flash point • Non-corrosive
• Fast evaporation • Nonstaining
• Plastic safe • Removes grease, oil, dirt and other contaminants
• Low VOC content • Safe on most plastics
• Strong cleaning action • This product is labeled extremely flammable
• No residue • Read and observe the special usage warning on the label
• 360° spray valve – spray in the up or down position • Do not apply while equipment is energized
• NSF K2 registered for use in meat and poultry plants • NSF K2 registered for use in meat and poultry plants
• CARB, OTC, LADCO and RoHS Complaint • CARB, OTC, LADCO and RoHS Complaint
Applications: Applications:
• Contacts • Relays • Switches
• Printed circuit boards • Generators • Circuit breakers
• Switches • Edge connectors • Contacts
• Telephones • Tape heads • Relays
• PCs • Buss bars • Meters
• Motors • Circuit breakers • Control systems
• Coils
Pkg. Qty.: 12 • Light bulb sockets Container: Aerosol
Size Net Wt. Size Net Wt.
Item No. Mfr. No. Application (oz) (oz) Container Item No. Mfr. No. (oz) (oz)
101850238 03190 Multi-Purpose 16 14 Aerosol 101842507 03140 16 10
101697799 02190 Electrical Grade 16 14 Aerosol
WARNING: Reproductive Harm - www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 207
Industrial Chemicals & Coatings
208 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 209
Industrial Chemicals & Coatings
210 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
*
CD757 Heavy-Duty Citrus Degreaser
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 211
Industrial Chemicals & Coatings
212 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
†
*
PreSolve® Orange Degreaser
The orange degreaser that solves the toughest cleaning problems.
A-151 Solvent Degreaser Features: Applications:
• Removes adhesives, grease, wax, tar and dirt • Air compressors
The quick penetrating action of A-151 works its way into • High performance industrial cleaner that • Alternators
hard-to-reach areas, degreasing parts and equipment cleans on contact • Bearings
thoroughly with no need to disassemble equipment to • Fast acting, deep penetration • Chains and cable connections
be cleaned. • Natural based • Cranes
• Does not contain chlorinated solvents • Diesel engines
Features: • Flash point above 100 °F (38 °C) • Electric motors
• High flash point > 158 °F (70 °C) • Nonconductive • Forklifts
• VOC exempt per EPA and CARB guidelines • Low residue • Gasoline engines
• Removes oil, grease and other contaminants • Safe on all metals and most plastics • Gears
• Ideal for parts washers, dip tanks and • Inverta spray valve lets you spray in an upright and • Generators
ultrasonic cleaners inverted position • High voltage cables
• Controlled evaporation • NSF® registered C1 #129025 (aerosol), • Power and air tools
• NSF registered C1 #059811 #059830 (bulk) • Printing presses
• McDonnell Douglas CSD #1 • Pulleys
Applications: • AMS 1525B • Terminals/switches
• Aircraft engine • Electric motors
components • Gauges Net Wt.
• Bearings • Gears Item No. Mfr. No. Size (oz) Container
• Cables • Heavy equipment 102100346 01420* 20 oz 15 Spray, Aerosol
• Chains • High voltage cables 102014790 01422 22 oz 20 Trigger Spray Bottle
• Controls • Parts washers 102100109 01405 5 gal — Pail
• Dip tanks • Ultrasonic cleaners 102104537 01455† 55 gal — Drum
Container: Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 213
Industrial Chemicals & Coatings
Freeze Spray
Aerosol coolant system that instantly freezes surfaces to Welder’s Anti-Spatter Spray
-60 °F. Includes extension tube for precise application. EL2007 Non-Flammable Duster
Features: Ultra-pure gas that removes microscopic particles of Prevents spatter from adhering to surrounding metal
• Nonflammable lint, dust and other contaminants. surfaces during welding. Eliminates the need to chisel,
• Leaves no residue grind or wire brush after welding.
Features:
• Nonabrasive • High delivery trigger valve Features:
• Safe on all plastics • Safe on plastics • Water-based formula allows for
• Dries instantly • Nonabrasive easy cleanup
• Nonflammable, nonconductive • Low odor
• NSF reg. # 130826, P1 rated • Rust-inhibiting additive
Applications: • Low HMIS rating at 1, 0, 0 • Nonhazardous decomposition
• Computers • Plant machinery • Contains no silicone
• Office equipment • Lab equipment Applications: • Contains no ODCs
• Electronics • Clean rooms • Electronics
• Video • Thermal • Optical Applications:
• Audio intermittents • Laboratory equipment • Tools
• Circuit boards • Personal computers • Resistance welding tips
Container: Aerosol w/ Trigger • Precision mechanical parts • Mig and Tig tips
• Weldments
Size Net Wt. Container: Aerosol w/ Trigger • Electrode holders
Item No. Mfr. No. (oz) (oz) • Contact tips
101722190 14086 12 10 Size Net Wt. • Metal molds
Item No. Mfr. No. (oz) (oz) • Bench top splash guards
112934587 SC2007000 10 10
Sold only in a case of 12. Container: Aerosol
Odor: Low
214 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Industrial Chemicals & Coatings
Features:
• Design improves stability
• Level III fluorination provides
maximum durability
• Blank lines and charts for product
information crcindustries.com/stoplight
Size
Item No. Mfr. No. (oz) Spray Pattern ©2021 CRC Industries, Inc
101844169 14021 24 Adjustable
www.BlasterCorp.com
216 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Janitorial Products
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial
Products 5
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
Pneumatic 9
Products
MARQUE
BRAND
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
Equipment
Index,
INDEX
Service Center
...and more!
Directory
Janitorial Products
Boardwalk is your go-to brand for professional workplace solutions. With more than 1,000
cleaning supplies, tools, towel & tissue items and personal care products designed to provide
consistent performance and professional results for less, with more quality, more support and
more savings all rolled into one. boardwalklabel.com
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
21/22
Bags Hand Cleaners & Skin Care
Trash Can Bags................................................................236-237 Bar Soap.................................................................................229
Ziploc® Bags...........................................................................236 Dispensers...............................................................................231
Cleaning Chemicals & Supplies Hand Cleaners..................................................................229-231
Brooms & Accessories......................................................234-235 Hand Wipes......................................................................221,230
Coil Cleaners...........................................................................227 Skin Care.................................................................................231
Degreasers & Safety Solvents....................................212,219-226 Insecticides
Dishwashing Detergents.........................................................226 Insecticides......................................................................228-229
Disinfectants.............................................................218-221,224 Repellents........................................................................228-229
Disposable Towels...................................................................233 Odor Control
Dust Removers........................................................................227 Air Fresheners.........................................................................225
General Purpose........................................218-219,222-224, 227 Surface Deodorizers..................................................219-220,224
Glass.........................................................................219,226-227 Urinal Deodorizers..................................................................225
Mold Cleaners.........................................................................225 Paper & Dispensers
Multi-Surface.....................................................219-220,227,235 Facial Tissue............................................................................233
Pads & Scrubbers....................................................................235 Hand Towels.....................................................................230,232
Rags........................................................................................234 Shop Towels............................................................................232
Sink & Drain Snakes................................................................226 Toilet Tissue......................................................................232-233
Stainless Steel...........................................................222,224,227 Toilet Tissue Dispensers...........................................................232
Toilet Bowl Cleaners......................................... 220-221,224-225 Wipers.....................................................................................233
Wipes...............................................................................221,230 Penetrating Oils...................................................................221
Food Service Trash Cans & Liners
Cups & Lids.............................................................................236 Can Liners.........................................................................236-237
Hairnets..................................................................................236 Containers & Lids.....................................................................237
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Features:
• Non-corrosive
• Butyl-free
Features: • Nonabrasive
• Nonabrasive • Nonflammable
• Nonflammable • Safe on most plastics
• Safe on most plastics • Industrial strength, non-ozone depleting
• Floor wax safe • Biodegradable
• Concentrated (bulk) and ready to use (trigger spray bottle) • NSF C1 registered
• NSF AI, CI registered for use in meat and poultry plants
Applications:
• Fabrics • Walls
• Canvas • Ink rollers
Applications: • Plastic • Grills
• Full Strength: Dirt, dust, grime, grease and oil on tools, parts, grills, tires, engines, • Fiberglass • Paint preparation
drives, motors, shop equipment, lawn and garden equipment, fabric stains and • Vinyl • Shop equipment
floor wax removal • Rubber • Lawn and garden equipment
• 3:1 (Water to HydroForce®): General facility cleaning, appliances, vents, exhaust • Polished metals • Appliances
fans, tubs, sinks, showers, garbage containers, plastic, fiberglass, canvas and vinyl • Stainless steel • Vents and exhaust fans
• 10:1 (Water to HydroForce®): Pressure washers, vehicle washing, walls, • Nonporous surfaces • Tubs
paint preparation, floor cleaning (floor wax safe), chrome, stainless steel • Vertical and overhead surfaces • Sinks
and polished metals • Work stations • Showers
• 25:1 (Water to HydroForce®): Glass, mirrors and Plexiglas® • Counters • Garbage containers
• For applications that will not allow butyl, but demand performance and versatility
Scent: Citrus
Item No. Mfr. No. Size Container
101844071 14401 32 oz Trigger Spray Bottle Size Net Wt.
101849754 14402 1 gal Bottle Item No. Mfr. No. (oz) (oz) Container
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 101850700 14400 20 18 Aerosol
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item No. Mfr. No. Type Size Container Size Net Wt.
101461286 14446 Ready to Use 32 oz Trigger Spray Bottle Item No. Mfr. No. (oz) (oz) Container
101459895 14449* Concentrated 55 gal Drum 101903833 14430 20 19 Aerosol
218 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Mr. Clean® Summer
PRO General Purpose Cleaner Citrus Multi-Surface
Antibacterial Cleaner
Features:
• Three cleaners in one
Features: • Cuts tough grease
• Maximum strength formula designed to eliminate grease and grime • Contains antibacterial action to kill germs
• Pro’s choice for tough jobs • Cleans glass surfaces to streak-free shine
• For industrial cleaning applications
• Color fast - fabric safe - leaves no residue Scent: Lemon
Size
Item No. Mfr. No. (oz) Container Pkg. Qty.
Item No. Mfr. No. Size Container 105953753 PGC82707CT 24 Bottle 9
116509356 352264 32 oz Spray Bottle
116509357 352262 1 gal Bottle
Features: Spray Nine® Heavy Duty Cleaner, Degreaser & Disinfectant's professional-strength
• All-purpose formula that cuts through dirt with ease cleaning power has been trusted by millions of professionals and consumers for over
• Does not contain any greenhouse gas propellants 50 years. Spray Nine® features a quaternary ammonium compound that sanitizes and
• NSF registered no. 115097, C1 rated disinfects hard, non-porous surfaces. Spray Nine works hard to remove all types of
dirt, grease, grime and stains.
Applications:
• Work stations Spray Nine has demonstrated effectiveness against viruses similar to Coronavirus
• Windshields Disease 2019 (SARS-CoV-2) on hard, non-porous surfaces. Therefore, Spray Nine can
• Counters be used against Coronavirus Disease 2019 (SARS-CoV-2) when used in accordance
• Fixtures with the directions for use against Norovirus/Feline Calicivirus, Rhinovirus Type 37,
• Metal and Poliovirus on hard, non-porous surfaces. Refer to the CDC website at
• Finished wood https://www.cdc.gov/coronavirus/2019-ncov/index.html for additional information.
Size Net Wt. Features:
Item No. Mfr. No. (oz) (oz) Container • Cleans - Tackles the toughest tasks head-on with less scrubbing
112934583 SC0880000 20 19 Spray, Aerosol • Degreases - VOC compliant; replaces heavy solvent degreasers
• Disinfects - Kills germs and helps control mold and mildew;
WARNING: This product contains chemicals known to the State of California to cause EPA registered (#6659-3)
cancer and birth defects or other reproductive harm. - www.P65Warnings.ca.gov. • NSF C-1 Rated
Applications:
• Home
LYSOL® Brand Disinfectant • Automotive
All-Purpose Cleaner • Industrial
• Institutional
Versatile, convenient, all-purpose spray cleaner. Use on walls, painted • Food service
woodwork, garbage cans, cabinets, floors, glazed tile, enamel and Scent: Lemon
glazed porcelain. EPA registered.
Item No. Mfr. No. Size Container
Features: 103591813 26832 32 fl oz Spray, Trigger
• Kills 99.9% of viruses and bacteria on hard nonporous surfaces 103596242 26801 1 gal Bottle
when used as directed
• Cleans, disinfects and deodorizes
• Cuts through tough grease and grime
• Controls mold and mildew
• Removes soap scum
• Lemon scented
Pine-Sol® Liquid Cleaner,
Size Disinfectant & Deodorizer
Item No. Mfr. No. (oz) Container Pkg. Qty.
113101052 RAC75352CT 32 Trigger Spray Bottle 12
Features:
Professional LYSOL® • This disinfectant is powerful and great for deep cleaning
Disinfectant Foam Cleaner • Cuts through tough grease and grime fast
• Deodorizes with a long-lasting scent
• Economical concentrated formula that can be diluted to clean
This rich foam clings to surfaces to kill staph, salmonella, surfaces, including sealed floors, toilets, tubs, tiles, walls, counters,
pseudomonas, HIV-1 (AIDS virus) and other germs on appliances, garbage cans and more
hard, nonporous surfaces. Its unique aerosol valve allows • Perfect for use in offices, day care centers, restaurants, schools and
spraying from any position, even upside down, to clean, other commercial facilities
shine, disinfect and deodorize. This product eliminates odors
and prevents growth of mold and mildew. Use on fiberglass,
glazed porcelain, synthetic marble, glazed tile, hard plastic
and vinyl. NSF category code C2. EPA registered. Size
Item No. Mfr. No. (oz) Container Scent Pkg. Qty.
Size 101682307 CLO41773CT 60 Bottle Pine 6
Item No. Mfr. No. (oz) Container Pkg. Qty. 101684332 CLO35418CT 144 Bottle Pine 3
101730124 RAC02775CT 24 Aerosol 12 101687138 CLO35419CT 144 Bottle Lemon Fresh 3
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 219
Janitorial Products
*
fantastik® Multi-Surface Broad Spectrum
Disinfectant Degreaser Disinfectant Cleaner Pro
Features: Features:
• Cleans, disinfects, degreases and deodorizes • Ideal for disinfecting hard, non-porous surfaces,
• Removes 100% tough soap scum and grease general cleaning and maintenance and odor control
• Leaves a pleasant scent • EPA-registered bactericide, virucide, tuberculocide
• Multi-purpose daily cleaner and fungicide
• Botanically-derived formula
• One-step hospital grade disinfection and cleaning
• No ammonias, chlorines or glutaraldehydes
• No harsh or lingering fumes
• Ready to use – no mixing required
Size
Item No. Mfr. No. (oz) Container
117562852 311836 32 Trigger Bottle Size
117562851 311930 128 Refill Item No. Mfr. No. (gal) Container
116509375 626001 1 Bottle
116509376 626055* 55 Drum
Windex® Multi-Surface
Disinfectant Sanitizer Cleaner
Features:
Clorox® Germicidal Bleach
• Starts working on dirt and grime even before you wipe
• Streak-free shine
• Makes glass cleaning fast and easy
• Cleans multiple surfaces, such as glass, stainless steel, chrome,
mirrors, tile, plastic, laminate and more
Features:
• Concentrated formula ideal for sanitizing and disinfecting
washrooms, shower stalls, toilets, countertops, food prep areas
and virtually all nonporous surfaces
• Effective against E. coli, HIV-1 (AIDS virus), salmonella, staph,
Size TB and hepatitis A
Item No. Mfr. No. (oz) Container • Complies with OSHA bloodborne pathogens standard
• Meets FDA guidelines for sanitizing food contact surfaces
117956889 322369 32 Spray Bottle
• NSF/USDA classification C1
117562849 682265 128 Refill • EPA registered
Mean Green Anti-Bacterial Multi-Surface Cleaner cuts through tough grease and
grime while killing 99.9% of germs.
Mean Green Anti-Bacterial is a formula that is used in many areas, including; health,
pre-school, hotel, kennel, restaurant, public and institutional facilities. The product
does not contain bleach, harsh acids or phosphates and is designed to provide
Professional LYSOL® Brand III
effective cleaning, deodorizing and disinfection in areas where housekeeping is of Disinfectant Spray
prime importance.
This product kills the following bacteria and viruses in 10 minutes: Salmonella This product eliminates odors and prevents the growth of mold and mildew.
enterica, Escherichia coli O157:H7, Staphylococcus aureus, Streptococcus Use on showers, sinks, countertops, around toilet areas, toys, telephones,
pyogenes, Klebsiella pneumoniae, Avian Influenza A Virus (H5N1), Herpes Simplex garbage bins, waiting rooms and in laboratories. NSF category code D1.
Type 1 Virus, Herpes Simplex Type 2 Virus, Influenza A (H1N1) Virus. EPA registered.
Features: Features:
• Kills 99.9% of germs • Tuberculocidal, virucidal, fungicidal, bactericidal
• Cuts through tough grease and grime • Kills 99.9% of germs on hard, nonporous surfaces when used as directed
• Multi-surface cleaner • Effective against over 50 microorganisms, including H1N1 (influenza A
• Ideal for use on countertops, sinks, garbage cans and diaper pails, virus), MRSA, Norovirus, Rhinovirus, Poliovirus type 1, Hepatitis A virus,
shower and tub and tile, toilets Hepatitis B virus and HIV-1 (AIDS virus)
Scent: Lemon
Size Pkg. Qty.
Size Item No. Mfr. No. (oz) Container Scent (Cans)
Item No. Mfr. No. (oz) Container 101564110 RAC04650CT 19 Aerosol Original 12
116509365 MG10532 32 Spray Bottle 113101044 RAC04675CT 19 Aerosol Fresh 12
220 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Scent: Fresh
WD-40® Specialist®
Item No. Mfr. No.
Size
(Ct) Container
Industrial-Strength
101680797 CLO15949CT 75 Canister
Cleaner & Degreaser
WD-40® Specialist® Industrial-Strength Cleaner & Degreaser is a water-based,
non-aerosol formula with a unique bio-solvent engineered and proven to be more
powerful, safer and easier to use than other degreasers on the market. It quickly
breaks through tough grease and grime and is excellent for cleaning greasy automotive
Sani-Wipe® No-Rinse parts, tools, shop floors, industrial machinery, commercial appliances and equipment.
Added corrosion inhibitors help protect against flash rust.
Surface Sanitizing Wipes
Features:
Features: • Powerful bio-solvent action with no messy diluting
• Premoistened wipe is recognized by the FDA as an appropriate • Won’t harm sensitive surfaces like aluminum, copper and glass
use for a no-rinse sanitizer on food contact surfaces • NSF Registered A1, A2, A4, A8, B1
• Helps prevent cross-contamination from bacteria that can cause • Environmentally friendly
food-borne illness • Meets U.S. EPA safer choice standards
• Kills 99.999% of staph, E. coli and shigella boydii on hard, • Safe on multiple surfaces
non-porous surfaces in 60 seconds • Prevents flash rust
• Quat-based formula requires no mixing, measuring or rinsing • Non-flammable, non-corrosive, non-abrasive, low odor
• EPA registered • Safe for use in food processing facilities
• NSF listed • Biodegradable
Size Size
Item No. Mfr. No. (Ct) Container Item No. Mfr. No. (oz) Container
101681352 NICQ94384 100 Canister 115746595 300349 24 Refillable Trigger
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 221
Janitorial Products
HydroForce® All-Purpose Degreaser HydroForce® Industrial
Strength Degreaser
* *
Versatile enough to use for all your degreasing tasks. HydroForce® Aqueous degreaser with the powerful performance of a solvent. Upon
All-Purpose breaks up and lifts off grease, oil and dirt deposits. contact, HydroForce® Industrial Strength Degreaser instantly begins to
Cleans up to three times the surface area as competing aqueous hunt down, break up and lift off heavy deposits of grease, oil and dirt.
cleaners. Perfect for facilities seeking an improvement over their Perfect for facilities seeking an alternative to traditional solvents. †
current all-purpose, aqueous cleaner.
Features:
Features: • For solvent strength degreasing
• Non-corrosive • Concentrated and non-abrasive
• Nonabrasive • Nonflammable
• Nonflammable • Low foaming – perfect for hand-held pressure washers and
• For grease-busting strength with maximum versatility industrial high pressure parts washers
• Biodegradable formula • Biodegradable, non-ozone depleting
• Low foaming – perfect for hand-held pressure washers and • May harm sensitive plastics
industrial high pressure parts washers • NSF C1 registered for use in meat and poultry plants
• Safe on most plastics • CARB, LADCO, OTC and RoHS compliant
• CARB: Complies with VOC regulations as detailed by the California
Air Resource Board (bulk only)
• OTC: Complies with VOC regulations as detailed by the Ozone
Transport Commission Applications:
• LADCO: Complies with VOC regulations as detailed by the Lake • Full Strength: Heavy grease, oil, sludge, grime, tar and rubber residue on tools,
Michigan Air Directors Consortium parts, concrete, grills, tires, engines, drives, motors and floor wax removal
• Complies with RoHS restrictions on the use of certain hazardous • 3:1 (Water to HydroForce®): Plastic, fiberglass, shop equipment and lawn/garden
substances in electrical and electronic equipment equipment
• SNAP: Meets the Environmental Protection Agency’s Significant • 8:1 (Water to HydroForce®): General facility cleaning, appliances, canvas, vents,
New Alternatives Policy requirements as a suitable aerosol exhaust fans, tubs, sinks, showers, garbage containers and vinyl
substitute for ozone-depleting substances • 50:1 (Water to HydroForce®): Pressure washers, vehicle washing, walls, paint
• NSF C1 registered for use in meat and poultry plants preparation, chrome, stainless steel and polished metals
Applications:
Net Wt.
• Full Strength: Grease, oil, sludge, and grime on tools, parts, grills, Item No. Mfr. No. Size (oz) Container
tires, engines, drives, motors and floor wax removal
• 3:1 (Water to HydroForce®): Plastic, fiberglass, shop equipment, 101842798 14414† 20 oz 18 Spray, Aerosol
lawn and garden equipment, vents and exhaust fans 101850945 14415a 32 oz — Trigger Spray Bottle
• 10:1 (Water to HydroForce®): General facility cleaning, appliances, 101851092 14418* 55 gal — Drum
canvas, tubs, sinks, showers, garbage containers, vinyl, chrome, a
Restricted from sale in CA.
stainless steel and polished metals WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
• 25:1 (Water to HydroForce®): Parts washers, vehicle washing,
walls and paint preparation
Features:
• Removes grease, oil and lubricants with no water
wash-off
• Controlled evaporation; leaves no residue
• d-Limonene and petroleum-blended degreaser
• Contains no chlorinated solvents
• Noncorrosive, nonabrasive and nonstaining
• CARB: Complies with VOC regulations as detailed by the
California Air Resource Board
• LADCO: Complies with VOC regulations as detailed by the
Lake Michigan Air Directors Consortium
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
• Use caution on plastics and paints
• NSF C1 registered
• OTC Compliant
Search Shop Find
Applications:
Products Trusted Brands Solutions • Bearings
• Chain
• Clutches
• Compressors
• Dies
• Generators
• Mechanical brakes
• Molds
• Motors Biodegradable: No
• Tools Dielectric Strength: 58,600 V
• Wire rope Flash Point: 170 °F TCC
Scent: Citrus
222 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Net Wt.
Item No. Mfr. No. Size (oz) Container
101932996 14440*,‡ 20 oz 15 Aerosol
101903428 14441† 1 gal — Bottle
101857984 14442† 5 gal — Pail
* WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
†
WARNING: Reproductive Harm - www.P65Warnings.ca.gov.
Size
Item No. Mfr. No. (oz)
113421033 SC1201TL0 33
WARNING: This product contains a chemical known to the State of California to cause
Heavy Duty Cleaner / Degreaser Wipes cancer. - www.P65Warnings.ca.gov.
*
Industrial Strength Cleaner
Features: and Degreaser
• Cut through the toughest tar, grease, wax, ink, paint, lubricants
and adhesive
• Extremely versatile and can be used for nearly any job, from cleaning Features:
tools, to wiping hands, to cleaning machinery and other surfaces • Best value for the industrial user
• Gentle on skin and are fortified with an emollient so they won’t crack • Tough jobs, big or small, there is a size that is just right
or dry hands • Maximum cleaning power
• Textured fabric won’t scratch surfaces and is ideal for scrubbing • Eliminates grease and grime
tough soils, while the smooth side wipes surfaces clean • Dissolves oil
• Formula won’t leave behind a residue, dries on its own, leaves a • Removes soap scum
pleasant citrus scent and no rinsing is required • No harmful fumes
Item No. Mfr. No. Size Container
Scent: Citrus 116509360 MG132 32 oz Spray Bottle
116509361 MG102 1 gal Bottle
Item No. Mfr. No. Container 116509363 106E 5 gal Pail
116509384 346527 30 count Container 116509362 MG104* 55 gal Drum
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 223
Janitorial Products
*
Features:
• No other single product removes really tough soils as
quickly and effectively from so many surfaces
• Heavy-duty formula for industrial cleaning applications
• Designed to quickly dissolve grease, grime, oil, tar, wax
and more on most non-porous surfaces
• Color fast - fabric safe - leaves no residue
• For use on tools, machinery, engine parts, construction
equipment, fiberglass, unfinished concrete, masonry
and asphalt
Aerosol Can Spray Bottle 24 oz Bottle 1 gallon Bottle 5 gallon Pail
Precision Clean Multi-Purpose Item No. Mfr. No. Size Container Pkg. Qty.
Cleaner / Degreaser 101685940 SMP13012CT* 24 oz Bottle w/ Trigger 12
101680775 SMP13005CT* 1 gal Bottle 6
This multi-purpose, concentrated cleaner/degreaser, formulated for industrial 101593410 SMP13006 5 gal Pail 1
applications, removes stubborn soils, oils, sludge, soot and other contaminants.
Features:
• Super industrial strength removes tough stains and soils
• Water-based biodegradable formula
• Alkaline formula inhibits flash rusting
• pH concentrate=13; pH ready-to-use=12.5
Comet® Deodorizing Cleanser
• Does not contain chlorinated or petroleum solvents, bleach, ammonia, with Chlorinol®
abrasives or butyl
• Rinses clean Features:
• Safe on all surfaces except magnesium • Bleaches tough stains and disinfects as it cleans
• Nonfood Compounds Program Listed Category Code: • Great for scouring tough stains on toilet bowls, wall tiles, tubs, sinks,
C1 Registration #059854 (bulk) chrome, stainless steel, stove tops/ranges, pots and pans
• Three formulations available: aerosol, concentrate and ready to use • Gentle abrasives can be used on fiberglass tubs/showers, imitation
• NSF® registered C1 #059854 (bulk) marble and similar hard plastic surfaces
• McDonnell Douglas CSD #1
• Boeing D6-17487 Rev. H
• AMS 1526A Size Pkg. Qty.
Item No. Mfr. No. (oz) Container (Cans)
101731090 PGC32987CT 21 Canister 24
Applications:
• Appliances • Landing gear
• APU • Leather and fabrics
• Bathrooms • Lifts
• Carbon blocks • Machine seat shop
• Cleaning electrical parts (deionized • Marine
water rinse/dry) • Oily parts
• Cleaning parts • Printing presses
• Compressors
• Drill presses
• Pulleys and wires
• Pylons
Scrubbing Bubbles®
• Engine and brake shops • Tanks Disinfectant Restroom
• Exhaust hoods • Thrust reverser buckets Cleaner II
• Floors • Tile
• Food processing equipment • Tools
• Forklifts • Trucks Features:
• Formica • Varnishes • Removes 100% of tough soap scum
• Fuselage • Walls • Foaming action thoroughly cleans, shines, disinfects and deodorizes –
• General cleaning of walls, counters, etc. • Wheel wells without scrubbing
• Graffiti • Wings • Attacks soap scum, hard water stains, mildew and dirt
• Hoists • Wood • Won’t scratch surfaces; leaves a brilliant shine
• Hydraulics • Not for use on acrylic, brass or marble surfaces
Size Size
Item No. Mfr. No. (oz) Container Item No. Mfr. No. (oz) Container Pkg. Qty.
102100934 02728 28 Trigger Spray Bottle 117562850 313358 25 Aerosol 12
224 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Features:
• Multi-purpose, multi-surface cleaner and degreaser with
orange power Odor and Moisture Control
• Cuts through tough grease and grime, leaving a fresh citrus
aroma, a scent of clean Desiccant Pack
• Gives a powerful clean that is safe on most washable surfaces
Features:
Scent: Citrus • Absorb and control odor in packed contents, boxes,
containers and pods
Size • Reduce humidity in contained, unattended spaces to help
Item No. Mfr. No. (oz) Container protect contents against mold damage and musty odor
116509364 7323 32 Spray Bottle • Low profile, easy-to-place pouches that fit easily into
pack-out boxes
• Completely non-toxic, biodegradable and easily discarded
after use
• Different sizes suitable for use in different sized pack-out
and storage containers
Width Height
Item No. Mfr. No. (in) (in)
*
116509377 6751092 8.0 7.3
Mold Control Pro 116509378 6851353 13.2 9.8
Features:
• Safe for use on hard surfaces and fabrics
• Single solution remediates and prevents mold
• No bleach, ammonia or VOCs Non-Para Urinal Screen
• EPA-registered for hard surface and fabric applications
• Requires zero isolation time and has no odor
with Cleaner Block
• Can be fogged to treat large and inaccessible spaces
• Ready-to-use solution – no mixing required Features:
• Enzyme block deodorizes, cleans and prevents
scale buildup
• Every flush tints water blue
627400 625326 • Healthy bacteria continuously eliminate odors
and maintain drain lines
• Flexible screen traps debris
Item No. Mfr. No. Size Container • Lasts up to 1,200 flushes
116509369 627400* 14.1 oz Aerosol Can
116509370 625326 32 oz Spray Bottle
116509371 625001 1 gal Bottle Item No. Mfr. No. Scent Pkg. Qty.
116509372 625005 5 gal Pail 101714226 BWKNUS Green Apple 12
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 225
Janitorial Products
*
HydroForce® Glass Cleaner
Professional Strength
PRO Drain Opener
Ammonia-fortified formula contains a foaming agent for greater
coverage and less run-off when cleaning vertical surfaces.
Features:
Krud Kutter® PRO Drain Opener starts working immediately
• For professional strength, streak-free glass cleaning
to clear blocked drains. This professional strength gel
• Ready to use
formula powers through standing water to remove all types of
• Biodegradable
stubborn clogs, hair, soap scum and grease.
• Nonabrasive foaming action
• Nonflammable
• Streak-free performance
• Quickly cuts through the toughest dirt, dust, fingerprint
Size and haze deposits
Item No. Mfr. No. (oz) Container • Does not contain solvents or other harmful ingredients
116509358 352236 32 Bottle • Plastic safe
• NSF C1 registered for use in meat and poultry plants
Applications:
Drano® Max Gel Clog Remover • Glass • Polished metals
• Fiberglass • Plastic
• Mirrors • Chrome
• Stainless steel • Linoleum
Features:
Dawn® Manual Pot & • Starts working on dirt and grime even before you wipe
• Streak-free shine
Pan Dish Detergent • Makes glass cleaning fast and easy
• Cleans multiple surfaces, such as glass, stainless steel, chrome,
mirrors, tile, plastic, laminate and more
Features:
• Dependable dishwashing liquid that fights grease, leaving squeaky
clean pots, pans and dishes
• Long-lasting suds can even help reduce number of sink refills Item No. Mfr. No. Size Container
• Dawn®’s outstanding grease cleaning washes up to two times more
dishes than the leading competition 117956888 322338 32 oz Spray Bottle
• Regular floral scent 117224729 696503 128 oz Refill
117224732 696502 5 gal Refill
UPS safe shipping.
Size
Item No. Mfr. No. (oz) Container Pkg. Qty.
101653554 PGC45112CT 38 Bottle 8 CD888 Glass Cleaner
Features:
• Removes soils, smoke haze, fingerprints, road film and surface smears
Joy® Dishwashing Liquid • Cleans any surface not normally harmed by water
• Will not cloud Plexiglas® or other plastic materials
Features: • Resists streaking
• Long-lasting suds with powerful surfactants to clean a • NSF Reg. # 115100, C1 rated
wide variety of soils Applications:
• Designed to be mild • Windows • Showcases
• High surfactant level to give a rich layer of suds and • Glass • Countertops
high suds mileage • Mirrors • Tile
• Forms surfactant micelles that stays suspended in wash water • Windshields • Vinyl upholstery
to provide micro-reservoirs of reserve cleaning power • Chrome • Safety glass
• Concentrated formula: 1 to 3 fl oz per 10-gallon sink
Scent: Lemon Size Net Wt.
Item No. Mfr. No. (oz) (oz) Container
Size 112934585 SC0888000 20 18 Aerosol
Item No. Mfr. No. (oz) Container Pkg. Qty.
WARNING: This product contains chemicals known to the State of California to cause
101614860 PGC45114CT 38 Bottle 8 cancer and birth defects or other reproductive harm. - www.P65Warnings.ca.gov.
226 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Coil Cleaner
PRO Glass Cleaner
Features:
• Chlorinated, solvent-based cleaner that aggressively removes grease and
dirt on air conditioning and refrigeration coils
• Evaporates quickly; leaves no residue
A ready-to-use, ammonia-free glass cleaner specifically designed to • Nonconductive
leave a streak-free, spotless shine. Ideal for: glass, mirrors, plastic, • Noncorrosive
stainless steel, sealed natural stone, aluminum, sinks, countertops and • Nonstaining
other washable surfaces. • No flash point
• Does not require rinsing
• Restricted from sale in CA
Features: Features:
• Cleans and shines windows, mirrors, stainless steel and other • Industrial strength
hard surfaces with less streaking • Ready to use
• Dissolves food and petroleum grease on hard surfaces • Nonflammable
• Cannot ship UPS • Noncorrosive
• CARB: Complies with VOC regulations as detailed by the
California Air Resource Board
Size • OTC: Complies with VOC regulations as detailed by the
Item No. Mfr. No. (oz) Container Pkg. Qty. Ozone Transport Commission
• LADCO: Complies with VOC regulations as detailed by the
101681389 CLO35293CT 32 Spray Bottle 9
Lake Michigan Air Directors Consortium
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
• NSF C1 registered for use in meat and poultry plants
Applications:
• Use in heavy industrial environments
Duster Aerosol Dust
™
• Stainless steel
Removal System • Chrome
• Aluminum Residue: Yes
Removes dirt and dust from any surface without damaging sensitive components • Other shiny metal surfaces Scent: Mild Solvent
or surface finish. Penetrates into cracks and crevices to remove contaminants.
Duster™ delivers a powerful blast of product to remove embedded debris. The Size Net Wt.
extension tube can be used for precise delivery. Item No. Mfr. No. (oz) (oz) Container
101850251 14424 20 18 Aerosol
Features:
• Nonflammable
• Leaves no residue
• Nonabrasive
• Safe on all plastics
• NSF K2 registered for use in meat and poultry plants
Applications:
• Plant machinery PRO Neutral Floor Cleaner
• Computers
• Office equipment
• Electronics
• Video
• Audio Krud Kutter® PRO Neutral Floor Cleaner is a professional
• Communication and photography equipment strength formula designed to clean and deodorize floors.
• Lighting This neutral pH cleaner is safe to use on most surfaces.
• Circuit boards
• Breaker panels Chlorinated Solvents: No
• Drafting tables Plastic Safe: Yes; Won’t Damage Sensitive Plastics Scent: Pine
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 227
Janitorial Products
INSECT SHIELD™ Insect Bee Blast® With Residual
Repellent Wipes Wasp & Hornet Killer
SCRUBS® INSECT SHIELD™ Insect Repellent Wipes feature an insect repellent Fast-acting, high strength insecticide that instantly soaks harmful insects and their
formula combined with a large, lint-free wipe. The 30% DEET insect repellent nests with a high output 20’ jet blast. Knocks down and kills wasps, hornets, yellow
formula provides a safe, yet highly effective level of protection. The wipe allows for jackets and bees. Kills with residual action as wasps and hornets return to nests.
a one-step, controlled application, making it safer than aerosol and pump sprays to Features:
use around the face with no worry of inhaling mist or vapors (do not apply product • Contains no chlorinated solvents
near eyes and mouth). Once applied, the formula is waterproof and greaseless so it • Safe on most plastics
won’t interfere with activities or tasks. Each wipe is individually packaged, making it • Safety Data Label (S.D.[L]®) right on the can
convenient to take along and easy to store. • CARB: Complies with VOC regulations as detailed by the
California Air Resource Board
• OTC: Complies with VOC regulations as detailed by the
Ozone Transport Commission
Features:
• LADCO: Complies with VOC regulations as detailed by the
• 30% DEET
Lake Michigan Air Directors Consortium
• Easy application
• Complies with RoHS restrictions on the use of certain hazardous
• Non-greasy
substances in electrical and electronic equipment
• Waterproof formula
• For sale in US and Puerto Rico only
• Long-lasting protection
• Provides protection from the insects that carry Applications:
the West Nile Virus • Electric and power utility areas
• Cable and wire installation sites
• Bridge and tower maintenance areas
• Industrial plant grounds
Item No. Mfr. No. Size Container DEET • Warehouses
112852605 91401 1 Box of 100 30% • Farm structures and buildings Dielectric Strength: 47,300 V
228 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Raid® Wasp and Hornet Killer allows you to attack from a distance, killing
the entire nest. It kills wasps and hornets on contact and is electrically
non-conducting up to 32,500 volts. Read label before use. Use only as directed.
Enhance Your Operations.
Document Your Savings.
Improve Your Bottom Line.
Features:
• Kills paper wasps, yellow jackets, mud daubers, bees and hornets in Applied® offers a service that we call DVA® (Documented
seconds on contact from over 20’ away
• Residual action kills wasps and hornets that return to the nest, and Value-Added®). DVA® is a comprehensive report that details
their pupae what you save as a result of the products and services you
• No CFCs purchase from Applied®. Whether we help you install energy
• EPA registered
efficient motors, implement a storeroom management system
or provide you with technical training, DVA® documents the
hard numbers that impact your bottom line.
Call us at 1-866-351-3464 to find out how
Size
you can save by doing business with Applied®.
Item No. Mfr. No. (oz) Container
Applied.com/dva
117224827 668006 14 Aerosol
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 229
Janitorial Products
SCRUBS in-a-Bucket®
Hand Cleaner Towels Connect with Us!
SCRUBS® Hand Cleaner Towels combine an advanced cleaning formula with a
strong, dual textured towel to thoroughly clean hands and surfaces ANYWHERE,
ANYPLACE, ANYTIME!® The clean, citrus-scented formula loosens and dissolves
industrial soils while leaving hands free from dryness and irritation. The Rough
Touch® blue towel locks in soil to prevent it from transferring back onto hands and
surfaces. Hands are left feeling clean with no sticky residue and no rinsing required.
Features:
• Clean, citrus fragrance
• Advanced cleaning power Kresto® KWIK-WIPES®
• For use on hands and surfaces
• No sticky residue
• NO SOAP! NO WATER! NO PROBLEM!™
Applications: Features:
• Dirt • Sealants • For quick cleaning of dirt, grease and grime when a sink
• Grease • Epoxy is not available
• Oil • Polyurethane • Textured wipes aid in removing ground-in dirt
• Paint • Tar • For use on skin, tools and other surfaces
• Adhesives • Ink
• Lubricants
Color: Blue
Scent: Citrus
Towel Size: 10 in x 12 in
Size
Size Item No. Mfr. No. (Ct) Container
Item No. Mfr. No. (Ct) Container 113862332 KKW70W 70 Canister
100872433 42272 72 Bucket 113862331 KKW130W 130 Bucket
* † PRODUCT CERTIFIED
FOR REDUCED
#
‡
ENVIRONMENTAL
IMPACT. VIEW SPECIFIC
A super-heavy duty hand cleaner that contains toxicologically safe solvents to life
difficult to remove oil-based contaminants without harming the skin.
Kresto® Heritage
Size
Item No. Mfr. No. (L) Container
113770655 09107b 2 Cartridge
a
Use with dispenser GPF3LDQ only.
b
Use with dispenser HVY2LDB.
White Dispenser Cartridge Cartridge Black Dispenser
A mild, biodegradable foam wash with added moisturizers and lightly scented with
a new signature fragrance of fresh apple. Cleans away over 99% of dirt and germs
Invigorating hand, hair and body cleaner with Rainforest fragrance. when used properly.
Estesol® Hand, Hair & Body Refresh™ Azure FOAM
Size Item No. Mfr. No. Size Container
Item No. Mfr. No. (L) Container 116302986 AZU10FL*,† 10 fl oz Bottle w/ Pump
111793777 HAB2LT 2 Cartridge 111421705 AZU1L*,† 1L Cartridge
111794278 SHW2LDP 2 White Dispenser 111794306 WRM1LDS 1L White Dispenser
111793801 AZU2LT*,† 2L Cartridge
111794307 WRM2LDP 2L White Dispenser
A dual sided, textured wipe designed to give superior cleaning properties. Cherry A heavy-duty solvent-free hand cleaner that contains Astopon® and Eucornol®
fragrance neutralizes petroleum odor on hands. that gently removes contaminants without damaging the skin.
Kresto® Cherry WIPES Solopol® Classic
Size Size
Item No. Mfr. No. (Ct) Container Item No. Mfr. No. (L) Container
111793857 KCW70W 70 Canister 111793829 SOL2LT‡ 2 Cartridge
111793858 KCW130W 130 Bucket 111794311 HVY2LDB 2 Black Dispenser
The world’s ONLY heavy duty cleaner with olive pit and cornmeal scrubbing agents
A super-heavy duty hand cleaner that contains toxicologically safe solvents in a FOAM format. Provides up to 42% more hand washes per liter conpared to
Astopon® and Eucornol® to remove difficult oil-based contaminants without traditional hand cleaners. Cleans better. Feels better. Saves money.
harming the skin.
Solopol® GFX™
Kresto® Classic
Size
Size Item No. Mfr. No. (L) Container
Item No. Mfr. No. (L) Container 111421707 GPF3LNAa,*,#,† 3.25 Cartridge
111793833 KCL2LTb 2 Cartridge 111421687 GPF3LDQ 3.25 Black Dispenser
230 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
# ‡
† PRODUCT CERTIFIED
FOR REDUCED
ENVIRONMENTAL
IMPACT. VIEW SPECIFIC
ATTRIBUTES EVALUATED:
UL.COM/EL
UL 2783
Effective, perfume-free, dye-free non-alcohol based foam sanitizer to kill 99.99% of many common germs in
30 seconds when used as directed.
Features: InstantFOAM™ Non-AlcoholPURE
• Glove/PPE compatible
• Suitable for use without water Size
Item No. Mfr. No. (L) Container
111793861 55857 1 Cartridge
†
*
After-work reconditioning cream to help restore moisture in dry and stressed skin.
Contains glycerin and lanolin to enhance elasticity and soothe skin while helping to
restore natural oils.
SBS® 40 Tube Stokolan® Classic Tube Dispenser
Stokolan® Classic Skin Conditioning Cream
Features:
Item No. Mfr. No. Size Container
• ECARF Certified
• Silicone-free 111793886 SCL100ML†, * 100 mL Tube
• Glove/PPE compatible 111793881 SCL1L†, * 1L Cartridge
Perfume-free, universal pre-work cream to help defend the skin against contact with water and non-water based
contaminants.
Stokoderm® Protect
Item No. Mfr. No. Size Container
111793788 UPW100ML* 100 mL Tube
111793783 UPW1L*,† 1L Cartridge
111794304 PRO1LDS 1L White Dispenser
Broad spectrum SPF 30 sunscreen for professional use against UVA and UVB rays. Water-resistant, perfume-free
Cartridge Dispenser
and dye-free. Protection against UVC rays created during some industrial processes.
Stokoderm® Sun Protect 30PURE
Item No. Mfr. No. Size Container
111793794 SUN1L 1L Cartridge
111793795 SUN100ML 100 mL Tube
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 231
Janitorial Products
*
Color: White
Towel Size: 10 in x 11.1 in
Sheets
Item No. Mfr. No. per Pack Container Pkg. Qty.
101794872 BWK6220 200 C-Fold 12
Features:
• Dependable dispensing – from one of the world’s most trusted brands
• One of the fastest roll change times on the market
• 950’ towel roll capacity
• Quick load feature and keyless locking option
• Dispenser lifetime warranty Multi-Fold Hand Towels
Dispenser
Depth Height Width
Item No. Mfr. No. Color (in) (in) (in) Pkg. Qty.
112971804 46253 Smoke 10.20 16.13 12.63 1
Dispenser Refills
Towel Size: 9 in x 9.45 in
Width Feet
Item No. Mfr. No. Color (in) per Roll Pkg. Qty.
Sheets per
112971712 02001* White 8 950 6 Item No. Mfr. No. Color Pack Container Pkg. Qty.
101800758 BWK6202 Brown 250 Multi-Fold 16
101754956 BWK6200 White 250 Multi-Fold 16
Item No. Mfr. No. Feet per Roll Container Pkg. Qty.
The longest two-ply Scott® branded bath tissue,
101715526 BWK6254 800 Roll 6 1,150’ Jumbo Roll Tissue provides unmatched labor
savings. It’s a one-handed easy refill: no key, no door,
no hassle. Help your facility achieve zero waste with a
dispenser that has a unique stub roll feature to reduce
waste and costs. Each jumbo roll is longer than standard
size bathroom tissue rolls.
Kraft Nonperforated 1-Ply Hardwound Roll Towels
Features:
• Designed primarily for hand-drying in Toilet Tissue
washrooms when combined with the Color: Natural Feet
appropriate dispenser Width: 8 in Width per Pkg. Qty.
• Embossed Core Size: 2 in Item No. Mfr. No. Color (in) Roll Container Ply (Packages)
111890480 07006* White 3.78 1,150 Roll 2 12
Item No. Mfr. No. Feet per Roll Container Pkg. Qty.
101754554 BWK6252 350 Roll 12
101752334 BWK6256 800 Roll 6
Scott Pro provides state-of-the-art solutions to maximize
productivity. The Scott Pro Jumbo Roll (JRT) Coreless
Center-Pull Bath Tissue Dispenser dispenses a 9.38” (diameter) x
3.8” (width) coreless roll, plus a stub roll. It holds more
Hand Towels than the equivalent of six standard commericial rolls of
bath tissue and is designed to minimize run-out, waste
and maintenance time. It meets the ADA Standards for
Features: Accessible Design, when properly installed and when
• Two-ply, white sheets using recommended paper. The easy-to-load system has
• Perforated for easy tear-off and dispensing no door, no key and no core to throw away. It features
• Product contains 80% post-consumer a smaller footprint than many other standard JRT
recycled material dispensers and accepts high-capacity coreless JRT rolls.
Color: White Toilet Tissue Dispenser
Towel Size: 7 7/8 in x 10 in
Depth Height Width
Item No. Mfr. No. Sheets per Roll Container Pkg. Qty. Item No. Mfr. No. Color (in) (in) (in)
101683648 BWK6400 660 Center-Pull Roll 6 111890503 34831 Smoke 5.87 10.39 14.13
232 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
JRT® Bathroom Tissue All WypAll white L Series can be aerobically composted in municipal or industrial
facilities in the US and Canada by ASTM D6868-11. Check with your waste hauler to
ensure your application and their composting processes are compatible.
Features:
• Embossed
• Product contains 65% recycled content
Color: White
Type: Jumbo Roll
Features:
• Compostable
• Portable, convenient point-of-use options enhance productivity
• Ideal for everyday cleaning and maintenance - absorbs liquids fast
MARQUE
BRAND
Sheets
Item No. Mfr. No. Color per Roll Towel Size Container
103827484 34790 White 126 9.10 x 16.80 Pop-Up* Box
103831501 54015 White 252 12.50 x 16.80 Brag* Box
WypAll® L30 Wipers 111769685 34955 White 1,100 10.50 x 12.25 Jumbo Roll
All WypAll white L Series can be aerobically composted in municipal or industrial *Trademark of Kimberly-Clark Worldwide Inc., or its affiliates.
facilities in the US and Canada by ASTM D6868-11. Check with your waste hauler to
ensure your application and their composting processes are compatible.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 233
Janitorial Products
All materials are carefully produced from new and reclaimed fabrics. These materials are cleaned and sterilized to ensure top quality consistency with every order. All 25 lb and
50 lb boxes have cut-out handles for easy lifting and relocation of boxes. All boxes have a perforated knock-out panel on one side for clean, easy dispensing. Other package sizes
and rag types available.
Size
Cloth Type Features Applications (lb) Container Item No. Mfr. No.
100% cotton, Low lint, Highly absorbent, 25 Box 115030991 20-202G-B
Washed Grey T-Shirt Staining, Polishing
Pre-washed 50 Box 114809654 20-202G-A
White Sheeting Low lint, Absorbent cotton Painting, Low lint, Wiper 25 Box 101756331 30-450-B
10 Box 101732793 30-550-C
White Polo T-Shirt Highly absorbent, General purpose Painting, Low lint, Wiper
25 Box 101732792 30-550-B
White Fleece/Sweatshirt Soft, Absorbent, General purpose Polishing, Low lint, Wiper 25 Box 101755459 20-206W-B
White Cotton Knit Highly absorbent, 100% cotton Polishing, Wiper 10 Box 101757390 20-204W-C
Recycled Fleece/Sweatshirt Soft, Absorbent, General purpose General purpose, Grease, Oil 25 Box 101756329 20-206-B
Recycled Cotton Flannel Soft, Absorbent, 100% cotton, General purpose Cleaning, Polishing, Heavy spills 25 Box 101733861 20-204-B
Recycled Colored Polo T-Shirt Soft, Absorbent, General purpose General purpose, Grease, Oil 50 Box 101755529 20-202-A
Recycled Color Terrycloth Highly absorbent Cleaning, Polishing, Heavy spills 25 Box 101733205 20-208-B
10 Box 101755458 20-202-C
Recycled Polo T-Shirt Soft, Absorbent, General purpose General purpose, Grease, Oil Box 101735127 20-202-B
25
Bag 101733203 20-202-B-BAGS
Auto body shops, Polishing,
New White T-Shirt Highly absorbent 25 Box 101779333 10-100-B
Other painting applications
10 Box 101733202 10-100G-C
New Grey T-Shirt Low lint Staining, Polishing
25 Box 101733201 10-100G-B
Huck Towels Multi-use, Utility towel, Low lint Glass, Mirrors 25 Box 101755534 30-250ST-B
Designed with a longer service life in mind, Osborn’s high-quality floor brooms Sturdy, metal-plated, rust-resistant braces provide additional support and
feature staple set fill materials for exceptional durability. Each block includes fit all handles.
threaded holes to accept wood or fiberglass handles. Perfect for both industrial and
DIY applications.
Use With:
• All handle sizes
Block Length
Item No. Mfr. No. Fill Material (in)
101829451 81206 Blue Flagged Polypro 18 Item No. Mfr. No. Type
101827606 81207 Blue Flagged Polypro 24
101443116 75115 Handle Brace
Block Length
Item No. Mfr. No. Fill Material (in)
101905004 81211 Black Tampico 18
101829692 81212 Black Tampico 24 Metal Handle with Threads
101813795 81216 Blue Polypro 18
101830940 81217 Blue Polypro 24
234 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
Dia. Length Synthetic scouring pad is excellent for common cleaning jobs. Performs well
Item No. Mfr. No. (in) (ft) on kitchen equipment, walls, railings, floors, desks, stairways, counters and
101442022 77015 15/16 5 maintenance equipment.
101442021 77016 1 1/8 5
Features:
• Use it for everyday cleaning of most cooking utensils
and equipment
• It replaces steel wool and metal sponges and won’t
leave metal slivers in hands or food
Heavy-Duty Dust Pan • Non-rusting and resilient
Color: Green
Pad Material: Synthetic Fiber
Features: Size
• Thinner front edge for improved dirt pickup Item No. Mfr. No. (in) Pkg. Qty.
• Molded-in serrated teeth for countertop duster cleaning
101926910 50-048011-08293-1 6x9 20
Width
Item No. Mfr. No. Color (in)
101695990 RCP2005CHA Charcoal 12 1/4
Color: Black
Height: 37 in *
Width: 12 1/2 in Mr. Clean® Magic
Eraser® Original
Item No. Mfr. No. Style
112994993 RCP253100BK Open Brighten up your home by helping to renew its
surfaces. Mr. Clean® Magic Eraser® Original will help
your walls, baseboards, floors, switch plates, blinds
and more look like new again by easily removing
scuff marks and dirt. To discover the cleaning
Fine Counter Duster possibilities, simply take a swipe. Its water-activated
micro-scrubbers reach into the surface grooves,
Osborn duster wood blocks are kiln-dried, premium quality hardwood, coated with lifting away built-up grease and soap scum. The
a clear moisture-resistant sealer that is resistant to oils and chemicals. Fill materials Mr. Clean® Magic Eraser® Original is so powerful
are firmly stapled set to ensure a lifetime of use. Include a hang-up hole in the that each swipe removes more grime. No harsh
handles for convenient storing. chemicals.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 235
Janitorial Products
Features:
Ziploc® Brand Seal Top Bags • Star seal bottom helps prevent leakage
• Made from high quality blended resins for superior strength
and puncture resistance
• Multi-purpose can liners recommended for sharper objects
and tougher transport conditions
• Greater tear resistance compared to HD liners
• Offers good load capacity Color: White
Pkg. Qty.
Capacity Liner Size Mil (Bags per
Item No. Mfr. No. (gal) (in) Grade Gauge Roll)
Features: 101755028 JAGW2432X 15 24 x 32 Medium 0.5 500
• Sturdy, disposable, easy-to-open, easy-to-fill bags
101753080 JAGW3036X 20 to 30 30 x 36 XX-Heavy 0.9 100
• Unique interlocking zipper seals securely, locks in freshness and protects foods
from drying 101752919 JAGW3858X 60 38 x 58 XX-Heavy 0.9 100
• Designed for space-saving food storage, portion control, food preparation Color: Gray
and transportation
• No. 682258 features write-on labels for easy identification and date-coding Pkg. Qty.
• Dispensing cartons are color-coded for kitchen organization Capacity Liner Size Mil (Bags per
• Kosher certified Item No. Mfr. No. (gal) (in) Grade Gauge Roll)
Pkg. 101766560 JAGG3339G 33 33 x 39 Super Extra-Heavy 1.3 100
Item No. Mfr. No. Type Capacity Qty. 101754943 JAGG4046G 40 to 45 40 x 46 Super Extra-Heavy 1.3 100
117224837 682255 Sandwich Bag N/A 500 101755785 JAGG4347G 56 43 x 47 Super Extra-Heavy 1.3 100
117224839 682258 Freezer Bag 1 gal 250 101751964 JAGG3858G 60 38 x 58 Super Extra-Heavy 1.3 100
236 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 237
Janitorial Products
Donaldson Delivers
238 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Janitorial Products
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 239
Janitorial Products
Fast delivery.
From your nearby Applied® service
center – ready to get you the janitorial
supplies you need, when you
need them.
Wide selection.
We carry the most popular products
from leading manufacturers.
Order consolidation.
Simplify procurement by ordering industrial
and general maintenance supplies
through one trusted source –
Applied Industrial Technologies!
240 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
General Industrial Products
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
DURHAM MFG
®
Pneumatic 9
Est. 1922 Products
Hydraulic 10
Products
Industrial Hose,
...and more! Valves & Process 11
Equipment
Index,
INDEX
Service Center
Directory
General Industrial Products
ENGINEERED SHAFT
LOCKING SOLUTIONS™
Shaft Collars
Rigid Couplings
Keyless Locking Devices
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
21/22
Abrasive Pads................................................................262-263 Shaft Collars
Batteries & Chargers............................................263,267-268 Clamping.........................................................................251-254
Brushes Set Screw................................................................................250
Paint.................................................................................261-262 Shims
Scratch.............................................................................261-262 Shim Stock.......................................................................257-259
Wire.................................................................................261-262 Slotted.............................................................................256-258
Carts & Trucks Spill Control..........................................................................242
Hand Trucks.............................................................................273 Storage
Utility Carts.............................................................................272 Bins.........................................................................................271
Extension Cords...................................................................270 Cabinets...........................................................................274-275
Fans Carts.......................................................................................272
Fan Accessories.......................................................................269 Drawers..................................................................................274
Fans.................................................................................269-270 Hand Trucks.............................................................................273
Portable Cooling Units.....................................................268-269 Work Benches..................................................................272-274
Fasteners Tape.................................................................................260-261
Electrical Connectors..............................................................247 Thread Repair Kits..............................................................276
Housing & Snap Ring Kits................................................247-249 Tool Storage
Key, Screw, Fitting, O-Ring & Pin Assortments...........242-248,255 Tool Carts & Accessories.........................................................273
Keystock...........................................................................254-256 Tool Storage Units............................................................274-275
Retaining Rings & Retaining Ring Pliers...........................247-249 Two-Way Radios & Accessories................................265-268
Flashlights & Work Lights...................................263-265,270
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Ultra-Utility Trays®
® ®
242 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
® ®
® ®
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 243
General Industrial Products
® ®
375 Piece Metric Set Screw Assortment 315 Piece Roll Pin Assortment
Set Contents for 12975 Set Contents for 12604
244 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
® ® ® ®
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 245
General Industrial Products
555 Piece Cotter
® ® Pin Assortment
150 Piece Hitch Pin Clip Assortment Features:
Reusable, quick-release pins for fast assembly and disassembly. • Strong and flexible zinc-plated steel pins with one prong
Features: extended for easy insertion and bending
• Made of spring steel to maintain tension • Pins have chisel point ends
• Handy kits for shop, toolroom or toolbox
Set Contents for 12915 • Ideally suited for maintenance needs that are constantly
arising
Size (in) Qty. • Most popular sizes included
Hitch Pin Clips • On hand when needed; saves time and money
1/16 - #18 60
• Conveniently packaged with removable dividers
• Durable, plastic compartment boxes are easy to store
3/32 - #3 30
Material: Spring Steel 3/32 - #7 20
1/8 - #16 20
Item No. Mfr. No. 5/32 - #10 15 Set Contents for 12602
101474470 12915 3/16 - #6 5 Size (in) Qty.
Cotter Pin Assortment
1/16 x 1 150
® ®
Set Contents for 13965 3/32 x 1 150
Material: Low Carbon Steel, Zinc Plated 3/32 x 1 1/2 100
83 Piece Clevis Pin Size (in) Qty. 1/8 x 1 1/4 75
Assortment Clevis Pins Item No. Mfr. No. 1/8 x 2 50
3/16 x 1 6 102468012 12602 5/32 x 2 1/2 30
1/4 x 1 7
1/4 x 1 1/4 4
1/4 x 1 1/2 7
1/4 x 1 3/4 4
1/4 x 2 6 600 Piece Cotter
1/4 x 2 1/4 3 ® ® Pin Assortment
1/4 x 2 1/2 3
5/16 x 1 6
Features: 5/16 x 1 1/4 4
• Plated finish extends life 5/16 x 1 1/2 5 Features:
• Chamfered end and hole 5/16 x 1 3/4 4 • One prong extended for easy insertion and
allow for easy insertion bending
5/16 x 2 3
• Pins have chisel-pointed ends
5/16 x 2 1/4 2 • ANSI/ASME B18.8.1
5/16 x 2 1/2 2
5/16 x 2 3/4 2
3/8 x 1 5 Set Contents for 12905
Material: Low Carbon Steel 3/8 x 1 1/2 4
3/8 x 2 2 Size (in) Qty.
Item No. Mfr. No. 1/2 x 1 1/2 2 Cotter Pins
102226727 13965 1/2 x 2 2 1/16 x 1 130
1/8 x 1 1/4 100
Material: Zinc-Plated Steel 1/8 x 2 80
3/32 x 1 150
® ®
Set Contents for 12912 Item No. Mfr. No. 3/32 x 1 3/4 100
176 Piece Dowel Pin Size (in) Qty. 101445062 12905 5/32 x 2 1/2 40
246 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
160 Piece Electrical
Terminal Assortment ® ®
300 Piece O-Ring Assortment
Features: Includes:
• Creates a tight • 140 pieces of 1/16” body
Set Contents for 12606 seal for fluid or • 80 pieces of 3/32” body
gas connections • 80 pieces of 1/8” body
Size Qty. • SAE 120 R1 • Various sizes are included for
Electrical Terminal Assortment each body size
12-10 ga. Ring 5.5-5 4
12-10 ga. Ring 5.5-8 4 Material: Buna-N 70 Durometer Rubber
12-10 ga. Ring 5.5-10 4
Features: 12-10 ga. Male Disconnect 5 Item No. Mfr. No.
• Terminals and connectors for industrial 12-10 ga. Female Disconnect 5 101492605 12930
and automotive applications 12-10 ga. Butt Connector 12
• Handy kits for shop, toolroom or 16-14 ga. Ring 2-6 10
toolbox 16-14 ga. Ring 2-5L 10
• Ideally suited for maintenance needs
that are constantly arising
16-14 ga. Ring 2-4L
16-14 ga. Male Disconnect
10
10
Rotor Pack Retaining
• Most popular sizes included
• On hand when needed; saves time and 16-14 ga. Female Disconnect 10 Ring Kit
money 16-14 ga. Spade 2-4 M 10
• Conveniently packaged with removable 16-14 ga. Bullet Male 10 Set Contents for RPK-4
dividers 16-14 ga. Bullet Female 10 Mfr. No. Housing/Shaft Dia. (in)
• Durable, plastic compartment boxes 16-14 ga. Butt Connector 18
are easy to store 16-14 ga. Quick Splice 4 Internal Retaining Rings
(Qty. 50 of each size)
22-18 ga. Ring 1.25-4 8
Item No. Mfr. No. 22-18 ga. Butt Connector 12 HO-37 3/8
102467961 12606 22-18 ga. Quick Splice 4 HO-43 7/16
Features: HO-50 1/2
• Complies with RoHS HO-56 9/16
restrictions on the use HO-62 5/8
of certain hazardous
175 Piece Electrical substances in electrical and
HO-75 3/4
HO-87 7/8
® ® Terminal Assortment electronic equipment HO-100 1
High quality terminals and connectors for industrial and automotive applications. HO-112 1 1/8
External Retaining Rings
(Qty. 50 of each size)
SH-25 1/4
SH-31 5/16
Set Contents for 12985
SH-37 3/8
Pkg. SH-43 7/16
Desc.
Qty. SH-50 1/2
Butt Connector 30 SH-56 9/16
Insulated Quick Slide Terminal 20 SH-62 5/8
Features: Non-insulated Quick Slide Terminal 20 SH-75 3/4
• MS-17143 Self-Splicing Connector 5 SH-87 7/8
• MS-20659 Spade Terminal 40 SH-100 1
• MS-25036 Ring Terminal 60 SH-112 1 1/8
Tools/Accessories
Item No. Mfr. No.
- Retaining Ring Pliers (Qty. 2)
101412866 12985
Item No. Mfr. No. - Clear Plastic Box (Qty. 4)
101599334 RPK-4 - Plastic Holder/Portable Carrying Case (Qty. 1)
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 247
General Industrial Products
Internal rings made from zinc-plated spring steel have a tapered design and
maintain constant pressure to prevent slippage of axles, gears and bearings inside
machinery housing. 265 Piece E-Ring Assortment
Set Contents for RPK-9
Size (in) Qty.
Internal Retaining Rings Set Contents for RPK-13
1/2 15 Size (in) Qty.
5/8 15
E-Rings
11/16 15
3/4 15 1/8 30
13/16 15 5/32 20
7/8 15 3/16 30
1 10 7/32 20
1 1/16 10 1/4 30
1 1/8 10 Features: 5/16 30
• Plated spring carbon steel 3/8 30
1 1/4 10
• External clips 7/16 25
Material: Spring Steel 1 3/8 5
1 1/2 5
Applications: 1/2 20
Item No. Mfr. No. • Retention of pulleys 5/8 15
1 5/8 5
• Sprockets 3/4 10
102038185 RPK-9 1 3/4 5 • Springs 7/8 5
• Bearings
Item No. Mfr. No.
218 Piece Metric Internal 102026163 RPK-13
Retaining Ring Assortment
Internal metric size rings made from spring steel with black phosphate finish. Series E Radially Assembled
Features:
• Tapered design External Retaining Ring
• Used to maintain Set Contents for RPK-12
constant pressure to The three prongs make contact with the bottom of the
prevent slippage Size Size
Qty. Qty. groove and provide a shoulder for effective retention of
• Complies with (mm) (mm)
assemblies.
RoHS restrictions Metric Internal Metric Internal
on the use of Retaining Rings Retaining Rings Features:
certain hazardous 10 20 25 8
• Complies with RoHS restrictions on the use of certain
substances in hazardous substances in electrical and electronic equipment
11 15 26 5
electrical and 12 20 28 8
electronic equipment Material: Carbon Spring Steel (Phosphate Coated)
14 18 30 8
• Axles, gears and 15 15 32 8
bearings inside Shaft
16 18 35 5 Dia. Pkg. Qty.
machinery housing Item No. Mfr. No. (in) (Pieces)
• Meets DIN 472 18 12 36 3
19 10 37 3 101843710 E-12ST PA PAK 1/8 125
20 12 38 5 101843709 E-18ST PA PAK 3/16 125
Item No. Mfr. No. 22 10 40 5 101845365 E-37ST PA PAK 3/8 75
102037331 RPK-12 24 10 101842864 E-50ST PA PAK 1/2 50
248 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Internal housing ring. Once installed in the groove of a housing, the portion of the Once installed in the groove of a shaft, the portion of the ring protruding from the
ring protruding from the groove holds an assembly in place. groove holds an assembly in place.
Features:
• Complies with RoHS restrictions on the use of
certain hazardous substances in electrical and
electronic equipment
Shaft
Dia. Pkg. Qty.
Features: Item No. Mfr. No. (in) (Pieces)
• Complies with RoHS restrictions on the use of certain hazardous substances in 101842735 SH-12ST PA PAK 0.1250 25
electrical and electronic equipment 101888511 SH-15ST PA PAK 0.1563 25
101840859 SH-18ST PA PAK 0.1875 25
101842614 SH-25ST PA PAK 0.2500 75
Material: Carbon Spring Steel (Phosphate Coated) 101843411 SH-31ST PA PAK 0.3125 75
101842531 SH-37ST PA PAK 0.3750 75
Housing 101843331 SH-43ST PA PAK 0.4375 50
Dia. Pkg. Qty. 101841926 SH-46ST PA PAK 0.4688 50
Item No. Mfr. No. (in) (Pieces) 101848610 SH-50ST PA PAK 0.5000 50
101848608 HO-25ST PA PAK 0.2500 75 101845368 SH-56ST PA PAK 0.5625 50
101842733 HO-31ST PA PAK 0.3125 75 101843712 SH-59ST PA PAK 0.5938 50
101840853 HO-37ST PA PAK 0.3750 75 101842615 SH-62ST PA PAK 0.6250 50
101842865 HO-43ST PA PAK 0.4375 50 101842381 SH-66ST PA PAK 0.6698 50
101848609 HO-50ST PA PAK 0.5000 50 101840860 SH-68ST PA PAK 0.6895 50
101843328 HO-56ST PA PAK 0.5625 50 101848611 SH-75ST PA PAK 0.7500 50
101842024 HO-62ST PA PAK 0.6250 50 101842867 SH-78ST PA PAK 0.7813 25
101843327 HO-68ST PA PAK 0.6875 50 101843713 SH-81ST PA PAK 0.8125 25
101842613 HO-75ST PA PAK 0.7500 50 101842537 SH-87ST PA PAK 0.8750 25
101888510 HO-81ST PA PAK 0.8125 25 101842254 SH-93ST PA PAK 0.9375 25
101842251 HO-87ST PA PAK 0.8750 25 101842538 SH-98ST PA PAK 0.9844 25
101842866 HO-93ST PA PAK 0.9375 25 101840856 SH-100ST PA PAK 1.0000 25
101843707 HO-100ST PA PAK 1.0000 25 101840861 SH-102ST PA PAK 1.0230 25
101842252 HO-106ST PA PAK 1.0625 25 101842868 SH-106ST PA PAK 1.0625 25
101844301 HO-112ST PA PAK 1.1250 25 101843412 SH-112ST PA PAK 1.1250 25
101843329 HO-118ST PA PAK 1.1875 25 101842737 SH-118ST PA PAK 1.1875 25
101842730 HO-125ST PA PAK 1.2500 25 101848612 SH-125ST PA PAK 1.2500 25
101844300 HO-131ST PA PAK 1.3125 25 101846137 SH-131ST PA PAK 1.3125 25
101843706 HO-137ST PA PAK 1.3750 25 101843708 SH-137ST PA PAK 1.3750 25
101843410 HO-143ST PA PAK 1.4375 25 101888512 SH-143ST PA PAK 1.4375 15
101842530 HO-150ST PA PAK 1.5000 25 101843326 SH-150ST PA PAK 1.5000 15
101841925 HO-156ST PA PAK 1.5625 15 101842539 SH-156ST PA PAK 1.5625 15
101842731 HO-162ST PA PAK 1.6250 15 101842379 SH-162ST PA PAK 1.6250 15
101842534 HO-165ST PA PAK 1.6500 10 101842255 SH-168ST PA PAK 1.6875 10
101843711 HO-168ST PA PAK 1.6875 10 101842532 SH-175ST PA PAK 1.7500 10
101842249 HO-175ST PA PAK 1.7500 10 101842540 SH-177ST PA PAK 1.7730 10
101844304 HO-181ST PA PAK 1.8125 10 101888513 SH-181ST PA PAK 1.8125 10
101842535 HO-187ST PA PAK 1.8750 10 101843332 SH-187ST PA PAK 1.8750 10
101843330 HO-193ST PA PAK 1.9375 10 101841927 SH-196ST PA PAK 1.9688 5
101840854 HO-200ST PA PAK 2.0000 10 101846062 SH-200ST PA PAK 2.0000 10
101842253 HO-206ST PA PAK 2.0500 6 101843714 SH-206ST PA PAK 2.0625 5
101844302 HO-212ST PA PAK 2.1250 6 101846138 SH-212ST PA PAK 2.1250 5
101842734 HO-218ST PA PAK 2.1700 6 101842617 SH-215ST PA PAK 2.1563 5
101840855 HO-225ST PA PAK 2.2500 6 101840857 SH-225ST PA PAK 2.2500 5
101844303 HO-231ST PA PAK 2.3125 6 101844305 SH-231ST PA PAK 2.3125 5
101843212 HO-237ST PA PAK 2.3750 6 101842025 SH-237ST PA PAK 2.3750 5
101846063 HO-244ST PA PAK 2.4375 6 101842618 SH-243ST PA PAK 2.4375 5
101842250 HO-250ST PA PAK 2.5000 6 101845366 SH-250ST PA PAK 2.5000 5
101842536 HO-256ST PA PAK 2.5625 4 101841928 SH-255ST PA PAK 2.5610 5
101843409 HO-262ST PA PAK 2.6250 4 101888508 SH-262ST PA PAK 2.6250 5
101843213 HO-268ST PA PAK 2.6875 4 101843333 SH-268ST PA PAK 2.6875 5
101843408 HO-275ST PA PAK 2.7500 4 101888509 SH-275ST PA PAK 2.7500 3
101846064 HO-281ST PA PAK 2.8125 4 101844306 SH-287ST PA PAK 2.8750 3
101845367 HO-287ST PA PAK 2.8750 4 101843715 SH-293ST PA PAK 2.9375 3
101846061 HO-300ST PA PAK 3.0000 4 101842616 SH-300ST PA PAK 3.0000 3
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 249
General Industrial Products
Set Screw Collar
Features:
• Precision-machined from cold finished steel
• Equipped with cup point setscrews
• Traditional cost-effective collar design
• Load capability is nearly doubled by adding a second setscrew in 2H @ 90 series
• Additional sizes available
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• Use with hard and soft shafts
I.D. O.D. Width WARNING: This product can expose you to chemicals, including Chromium (VI) and
Item No. Mfr. No. (mm) (in) Screw Size (mm) Nickel, which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
101808438 C-143-S 1 7/16 2 1/4 3/8-16 UNC 3/4
101782633 C-150-S 1 1/2 2 1/4 3/8-16 UNC 3/4 Finish: None
101783456 C-156-S 1 9/16 2 1/2 3/8-16 UNC 13/16 Metric 303 Stainless Steel
101785070 C-162-S 1 5/8 2 1/2 3/8-16 UNC 13/16 I.D. O.D. Width
101785069 C-168-S 1 11/16 2 1/2 3/8-16 UNC 13/16 Item No. Mfr. No. (mm) (in) Screw Size (mm)
101783539 C-175-S 1 3/4 2 5/8 1/2-13 UNC 7/8 101807151 MC-10-S 10 7/8 M5 10
101782634 C-187-S 1 7/8 2 3/4 1/2-13 UNC 7/8 101782663 MC-20-S 20 1 1/4 M6 14
101784212 C-193-S 1 15/16 3 1/2-13 UNC 7/8
WARNING: This product can expose you to chemicals, including Chromium (VI) and
101783541 C-200-S 2 3 1/2-13 UNC 7/8 Nickel, which are known to the State of California to cause cancer, birth defects or other
101783172 C-218-S 2 3/16 3 1/4 1/2-13 UNC 15/16 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
101783404 C-225-S 2 1/4 3 1/4 1/2-13 UNC 15/16
101828457 C-237-S 2 3/8 3 1/4 1/2-13 UNC 15/16 Finish: Black Oxide
Metric Steel
101781104 C-243-S 2 7/16 3 1/2 1/2-13 UNC 1
101782020 C-250-S 2 1/2 3 1/2 1/2-13 UNC 1 I.D. O.D. Width
101808279 C-262-S 2 5/8 4 1/2-13 UNC 1 1/8 Item No. Mfr. No. (mm) (in) Screw Size (mm)
101782046 C-268-S 2 11/16 4 1/2-13 UNC 1 1/8 101782036 MC-20 20 1 1/4 M6 14
101807149 C-293-S 2 15/16 4 1/2-13 UNC 1 1/8 101783419 MC-25 25 1 5/8 M8 16
101782156 C-300-S 3 4 1/2-13 UNC 1 1/8 101784325 MC-30 30 1 7/8 M8 16
WARNING: This product can expose you to chemicals, including Chromium (VI) and WARNING: This product can expose you to chemicals, including Chromium (VI) and
Nickel, which are known to the State of California to cause cancer, birth defects or other Nickel, which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov. reproductive harm. For more information, go to www.P65Warnings.ca.gov.
250 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
One Piece Clamping Collar
Features:
• Clamping design fully engages shaft without marring or causing other shaft damage
• Greater axial holding power than set screw collars
• Available in additional sizes
• Bore tolerance +.003/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical
and electronic equipment
• Use with hard and soft shafts
Inch 303 Stainless Steel Inch Aluminum Inch Steel
Inch 303 Stainless Steel Finish: None Inch Steel Finish: Black Oxide
Lower Storeroom
101783156 1C-025-A 1/4 11/16 4-40 UNC 5/16
101783727 1C-031-A 5/16 11/16 4-40 UNC 5/16
101781086 1C-037-A 3/8 7/8 6-32 UNC 3/8
Operating and
101782015 1C-043-A 7/16 15/16 6-32 UNC 3/8
101781087 1C-050-A 1/2 1 1/8 8-32 UNC 13/32
101785051 1C-062-A 5/8 1 5/16 10-32 UNF 7/16
101783934
101781975
101808430
1C-075-A
1C-087-A
1C-100-A
3/4
7/8
1
1 1/2
1 5/8
1 3/4
1/4-28 UNF
1/4-28 UNF
1/4-28 UNF
1/2
1/2
1/2
Inventory Costs
101966656
101946218
1C-112-A
1C-118-A
1 1/8
1 3/16
1 7/8
2 1/16
1/4-28 UNF
1/4-28 UNF
1/2
1/2 Ask your Applied®
101782148 1C-125-A 1 1/4 2 1/16 1/4-28 UNF 1/2
101951370
101948038
1C-137-A
1C-143-A
1 3/8
1 7/16
2 1/4
2 1/4
1/4-28 UNF
1/4-28 UNF
9/16
9/16
representative about our
101828427
101951184
1C-150-A
1C-162-Aa
1 1/2
1 5/8
2 3/8
2 5/8
1/4-28 UNF
5/16-24 UNF
9/16
11/16 Storeroom Services Program
and how we can help you
101828428 1C-175-Aa 1 3/4 2 3/4 5/16-24 UNF 11/16
101783162 1C-193-Aa 1 15/16 3 5/16-24 UNF 11/16
101828429 1C-200-Aa 2 3 5/16-24 UNF 11/16
113050798
113050801
1C-225-Aa
1C-243-Aa
2 1/4
2 7/16
3 1/4
3 1/2
5/16-24 UNF
5/16-24 UNF
3/4
3/4
efficiently identify, organize,
101407181
113050838
1C-250-Aa
1C-293-Aa
2 1/2
2 15/16
3 3/4
4 1/4
3/8-24 UNF
3/8-24 UNF
7/8
7/8 optimize and manage
your inventory.
113050839 1C-300-A 3 4 1/4 3/8-24 x 1 7/8
WARNING: This product can expose you to chemicals, including Chromium (VI) and
Nickel, which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
a
No relief cut.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 251
General Industrial Products
Two Piece Clamping Collar
Features:
• Clamping design fully engages the shaft without marring or causing other shaft
damage
• Easily installed where major disassembly would otherwise be required Inch 303 Stainless Steel
• Greater axial holding power than set screw collars and one piece clamping collars w/ Recessed Screw
• Recessed screw head design provides an outside surface free of major projections Finish: None
• Additional sizes available Recessed Screw: Yes
Inch 303 Stainless Steel
• Bore tolerance +.030/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in I.D. O.D. Width
electrical and electronic equipment Item No. Mfr. No. (in) (in) Screw Size (in)
101783549 H2C-037-S 3/8 1 1/16 6-32 UNC 5/16
101784028 H2C-050-S 1/2 1 1/4 8-32 UNC 3/8
101784310 H2C-062-S 5/8 1 1/2 10-32 UNF 13/32
101782025 H2C-075-S 3/4 1 3/4 1/4-28 UNF 1/2
101783551 H2C-100-S 1 2 1/4-28 UNF 1/2
101784311 H2C-112-S 1 1/8 2 1/8 1/4-28 UNF 1/2
101944392 H2C-118-S 1 3/16 2 1/8 1/4-28 UNF 1/2
101782319 H2C-125-S 1 1/4 2 1/4 1/4-28 UNF 1/2
101951186 H2C-137-S 1 3/8 2 3/8 1/4-28 UNF 1/2
101809540 H2C-143-S 1 7/16 2 3/8 1/4-28 UNF 1/2
101807825 H2C-150-S 1 1/2 2 1/2 1/4-28 UNF 1/2
Inch 303 Stainless Steel 101957145 H2C-175-S 1 3/4 3 5/16-24 UNF 5/8
101783552 H2C-193-S 1 15/16 3 1/4 5/16-24 UNF 5/8
Finish: None 101784647 H2C-200-S 2 3 1/4 5/16-24 UNF 5/8
Recessed Screw: No 101939987 H2C-218-S 2 3/16 3 1/2 5/16-24 UNF 5/8
Inch 303 Stainless Steel 102076499 H2C-225-S 2 1/4 3 1/2 5/16-24 UNF 5/8
I.D. O.D. Width 101674449 H2C-237-S 2 3/8 3 1/2 5/16-24 UNF 5/8
Item No. Mfr. No. (in) (in) Screw Size (in) 102022235 H2C-243-S 2 7/16 4 3/8-24 UNF 3/4
101782623 2C-025-S 1/4 11/16 4-40 UNC 5/16 102224956 H2C-250-S 2 1/2 4 3/8-24 UNF 3/4
101783729 2C-031-S 5/16 11/16 4-40 UNC 5/16 105506903 H2C-275-S 2 3/4 4 1/4 3/8-24 UNF 3/4
101783163 2C-037-S 3/8 7/8 6-32 UNC 3/8 105507013 H2C-287-S 2 7/8 4 1/2 3/8-24 UNF 3/4
101807812 2C-043-S 7/16 15/16 6-32 UNC 3/8 105506269 H2C-293-S 2 15/16 4 1/2 3/8-24 UNF 3/4
101783165 2C-050-S 1/2 1 1/8 8-32 UNC 13/32 102054635 H2C-300-S 3 4 1/2 3/8-24 UNF 3/4
101781092 2C-062-S 5/8 1 5/16 10-32 UNF 7/16 WARNING: This product can expose you to chemicals, including Chromium (VI) and
101782016 2C-075-S 3/4 1 1/2 1/4-28 UNF 1/2 Nickel, which are known to the State of California to cause cancer, birth defects or other
101782915 2C-087-S 7/8 1 5/8 1/4-28 UNF 1/2 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
101783730 2C-100-S 1 1 3/4 1/4-28 UNF 1/2
101783449 2C-112-S 1 1/8 1 7/8 1/4-28 UNF 1/2
101782627 2C-118-S 1 3/16 2 1/16 1/4-28 UNF 1/2 Continued on next page.
101783166 2C-125-S 1 1/4 2 1/16 1/4-28 UNF 1/2
101957137 2C-131-S 1 5/16 2 1/4 1/4-28 UNF 9/16
101782628
101781096
2C-137-S
2C-143-S
1 3/8
1 7/16
2 1/4
2 1/4
1/4-28 UNF
1/4-28 UNF
9/16
9/16 Enhance Your Operations.
101807813
101807145
2C-150-S
2C-162-S
1 1/2
1 5/8
2 3/8
2 5/8
1/4-28 UNF
5/16-24 UNF
9/16
11/16 Document Your Savings.
101949417
101784207
2C-168-S
2C-175-S
1 11/16
1 3/4
2 3/4
2 3/4
5/16-24 UNF
5/16-24 UNF
11/16
11/16 Improve Your Bottom Line.
101782917 2C-187-S 1 7/8 2 7/8 5/16-24 UNF 11/16
101783397 2C-193-S 1 15/16 3 5/16-24 UNF 11/16 Applied® offers a service that we call DVA®
101784018 2C-200-S 2 3 5/16-24 UNF 11/16 (Documented Value-Added®). DVA® is a
101782657 2C-218-S 2 3/16 3 1/4 5/16-24 UNF 3/4
101782658 2C-225-S 2 1/4 3 1/4 5/16-24 UNF 3/4 comprehensive report that details what you
101783568 2C-237-S 2 3/8 3 1/2 5/16-24 UNF 3/4 save as a result of the products and services
101782331 2C-243-S 2 7/16 3 1/2 5/16-24 UNF 3/4
101783426 2C-250-S 2 1/2 3 3/4 3/8-24 UNF 7/8 you purchase from Applied®. Whether we
101911964 2C-268-S 2 11/16 4 3/8-24 UNF 7/8 help you install energy efficient motors,
101827718 2C-275-S 2 3/4 4 3/8-24 UNF 7/8
101783569 2C-287-S 2 7/8 4 1/4 3/8-24 UNF 7/8 implement a storeroom management system
101783759
101808462
2C-293-S
2C-300-S
2 15/16
3
4 1/4
4 1/4
3/8-24 UNF
3/8-24 UNF
7/8
7/8
or provide you with technical training, DVA®
102021476 H2C-318-S 3 3/16 4 1/2 3/8-24 UNF 7/8 documents the hard numbers that impact
102020673
102012045
H2C-325-S
H2C-343-S
3 1/4
3 7/16
4 1/2
4 3/4
3/8-24 UNF
3/8-24 UNF
7/8
7/8
your bottom line.
101930722 H2C-350-S 3 1/2 4 3/4 3/8-24 UNF 7/8
104175248 H2C-393-S 3 15/16 5 1/4 3/8-24 UNF 7/8
Call us at 1-866-351-3464 to find
101955074 H2C-400-S 4 5 1/4 3/8-24 UNF 7/8 out how you can save by doing
110503951 H2C-443-S 4 7/16 5 3/4 3/8-24 UNF 7/8
102021558 H2C-450-S 4 1/2 5 3/4 3/8-24 UNF 7/8
business with Applied®.
102021806 H2C-493-S 4 15/16 6 1/4 3/8-24 UNF 7/8
101935241 H2C-500-S 5 6 1/4 3/8-24 UNF 7/8 Applied.com/dva
105663295 H2C-600-S 6 7 1/4 3/8-24 UNF 7/8
WARNING: This product can expose you to chemicals, including Chromium (VI) and
Nickel, which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
252 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Continued from previous page.
Inch Steel w/
Recessed Screw Finish: Black Oxide Finish: Black Oxide
Recessed Screw: Yes Inch Steel Recessed Screw: No
Inch Steel
I.D. O.D. Width I.D. O.D. Width
Item No. Mfr. No. (in) (in) Screw Size (in) Item No. Mfr. No. (in) (in) Screw Size (in)
101781968 H2C-037 3/8 1 1/16 6-32 UNC 5/16 101784016 2C-025 1/4 11/16 4-40 UNC 5/16
101783388 H2C-050 1/2 1 1/4 8-32 UNC 3/8 101807811 2C-031 5/16 11/16 4-40 UNC 5/16
101783153 H2C-062 5/8 1 1/2 10-32 UNF 13/32 101785057 2C-037 3/8 7/8 6-32 UNC 3/8
101828420 H2C-075 3/4 1 3/4 1/4-28 UNF 1/2 101783447 2C-043 7/16 15/16 6-32 UNC 3/8
101783389 H2C-100 1 2 1/4-28 UNF 1/2 101782014 2C-050 1/2 1 1/8 8-32 UNC 13/32
101783930 H2C-112 1 1/8 2 1/8 1/4-28 UNF 1/2 101782624 2C-062 5/8 1 5/16 10-32 UNF 7/16
101781084 H2C-118 1 3/16 2 1/8 1/4-28 UNF 1/2 101784646 2C-075 3/4 1 1/2 1/4-28 UNF 1/2
101781969 H2C-125 1 1/4 2 1/4 1/4-28 UNF 1/2 101808433 2C-087 7/8 1 5/8 1/4-28 UNF 1/2
101785050 H2C-137 1 3/8 2 3/8 1/4-28 UNF 1/2 101781704 2C-100 1 1 3/4 1/4-28 UNF 1/2
101781083 H2C-143 1 7/16 2 3/8 1/4-28 UNF 1/2 101781094 2C-112 1 1/8 1 7/8 1/4-28 UNF 1/2
101781085 H2C-150 1 1/2 2 1/2 1/4-28 UNF 1/2 101784017 2C-118 1 3/16 2 1/16 1/4-28 UNF 1/2
101783726 H2C-175 1 3/4 3 5/16-24 UNF 5/8 101808434 2C-125 1 1/4 2 1/16 1/4-28 UNF 1/2
101782013 H2C-193 1 15/16 3 1/4 5/16-24 UNF 5/8 101784206 2C-131 1 5/16 2 1/4 1/4-28 UNF 9/16
101807137 H2C-200 2 3 1/4 5/16-24 UNF 5/8 101785058 2C-137 1 3/8 2 1/4 1/4-28 UNF 9/16
101781970 H2C-218 2 3/16 3 1/2 5/16-24 UNF 5/8 WARNING: This product can expose you to chemicals, including Chromium (VI) and
101828423 H2C-225 2 1/4 3 1/2 5/16-24 UNF 5/8 Nickel, which are known to the State of California to cause cancer, birth defects or other
101784645 H2C-237 2 3/8 3 1/2 5/16-24 UNF 5/8 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
101784644 H2C-243 2 7/16 4 3/8-24 UNF 3/4
101781971 H2C-250 2 1/2 4 3/8-24 UNF 3/4
101784010 H2C-275 2 3/4 4 1/4 3/8-24 UNF 3/4
101783390 H2C-287 2 7/8 4 1/2 3/8-24 UNF 3/4
101782141 H2C-293 2 15/16 4 1/2 3/8-24 UNF 3/4
101783932 H2C-300 3 4 1/2 3/8-24 UNF 3/4
101783558 H2C-318 3 3/16 4 1/2 3/8-24 UNF 7/8
101783557 H2C-325 3 1/4 4 1/2 3/8-24 UNF 7/8
101828443 H2C-343 3 7/16 4 3/4 3/8-24 UNF 7/8
101783469 H2C-350 3 1/2 4 3/4 3/8-24 UNF 7/8
101828444 H2C-393 3 15/16 5 1/4 3/8-24 UNF 7/8
101783749 H2C-400 4 5 1/4 3/8-24 UNF 7/8
101808263 H2C-443 4 7/16 5 3/4 3/8-24 UNF 7/8 Metric Stainless Steel
101809549 H2C-450 4 1/2 5 3/4 3/8-24 UNF 7/8
101782034 H2C-493 4 15/16 6 1/4 3/8-24 UNF 7/8 Finish: None
101782323 H2C-500 5 6 1/4 3/8-24 UNF 7/8 Recessed Screw: No
Metric 303 Stainless Steel
102204966 H2C-600 6 7 1/4 3/8-24 UNF 7/8
I.D. O.D. Width
WARNING: This product can expose you to chemicals, including Chromium (VI) and Item No. Mfr. No. (in) (in) Screw Size (in)
Nickel, which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov. 101810012 M2C-08-S 8 1 M3 9
102149765 M2C-10-S 10 1 M3 9
Finish: Black Oxide 101784349 M2C-12-S 12 1 1/8 M4 11
Recessed Screw: No 101640752 M2C-15-S 15 1 3/8 M5 13
Inch Steel 101807432 M2C-17-S 17 1 1/2 M5 13
I.D. O.D. Width 101704780 M2C-20-S 20 1 5/8 M6 15
Item No. Mfr. No. (in) (in) Screw Size (in) 101784046 M2C-25-S 25 1 7/8 M6 15
101781095 2C-143 1 7/16 2 1/4 1/4-28 UNF 9/16 101806824 M2C-30-S 30 2 1/8 M6 15
101782629 2C-150 1 1/2 2 3/8 1/4-28 UNF 9/16 101913544 M2C-35-S 35 2 1/4 M6 15
101783168 2C-162 1 5/8 2 5/8 5/16-24 UNF 11/16 101933152 M2C-40-S 40 2 3/8 M6 15
101783451 2C-168 1 11/16 2 3/4 5/16-24 UNF 11/16 101682782 M2C-45-S 45 2 7/8 M8 19
101783452 2C-175 1 3/4 2 3/4 5/16-24 UNF 11/16 101783775 M2C-50-S 50 3 1/8 M8 19
101785060 2C-187 1 7/8 2 7/8 5/16-24 UNF 11/16 110503971 M2C-54-S 54 3 1/4 M8 x 25 19
101783167 2C-193 1 15/16 3 5/16-24 UNF 11/16 101928949 M2C-55-S 55 3 1/4 M8 19
101783450 2C-200 2 3 5/16-24 UNF 11/16 101811026 M2C-60-S 60 3 1/2 M8 19
101782918 2C-218 2 3/16 3 1/4 5/16-24 UNF 3/4 101969839 M2C-65-S 65 3 3/4 M8 19
101782630 2C-225 2 1/4 3 1/4 5/16-24 UNF 3/4 101969840 M2C-70-S 70 4 M8 19
101784019 2C-237 2 3/8 3 1/2 5/16-24 UNF 3/4 101970491 M2C-75-S 75 4 1/4 M8 19
101783399 2C-243 2 7/16 3 1/2 5/16-24 UNF 3/4 101951888 M2C-80-S 80 4 1/4 M8 19
101807815 2C-250 2 1/2 3 3/4 3/8-24 UNF 7/8
WARNING: This product can expose you to chemicals, including Chromium (VI) and
101783453 2C-268 2 11/16 4 3/8-24 UNF 7/8 Nickel, which are known to the State of California to cause cancer, birth defects or other
101782018 2C-275 2 3/4 4 3/8-24 UNF 7/8 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
101783400 2C-287 2 7/8 4 1/4 3/8-24 UNF 7/8
101783732 2C-293 2 15/16 4 1/4 3/8-24 UNF 7/8
101783535 2C-300 3 4 1/4 3/8-24 UNF 7/8 Continued on next page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 253
General Industrial Products
Continued from previous page.
® ®
Square Plated Steel Keystock
Two Piece Clamping Collar Used to provide driving torque between shafts and pulleys, gears, sprockets, etc.
Features:
• Most tolerances on dimensions are oversized
Finish: Black Oxide to ensure tight fits in keyways for positive, zero
Recessed Screw: No backlash power transmission
Metric Steel • Used for new machinery, general maintenance
I.D. O.D. Width and shop repairs
Item No. Mfr. No. (in) (in) Screw Size (in) • Meets ASTM A-108
101808270 M2C-08 8 1 M3 9 Finish: Zinc Plated
101785086 M2C-10 10 1 M3 9 Length: 12 in
101808271 M2C-12 12 1 1/8 M4 11 Material: Carbon Steel
101783286 M2C-15 15 1 3/8 M5 13
101807142 M2C-17 17 1 1/2 M5 13 Size
101804735 M2C-20 20 1 5/8 M6 15 Item No. Mfr. No. (in)
101828451 M2C-25 25 1 7/8 M6 15 101415388 14124 3/32
101808272 M2C-30 30 2 1/8 M6 15 101392620 14149 1/8
101783422 M2C-35 35 2 1/4 M6 15 101394915 14174 5/32
101808273 M2C-40 40 2 3/8 M6 15 101412910 14199 3/16
101783566 M2C-45 45 2 7/8 M8 19 101400616 14249 1/4
101784334 M2C-50 50 3 1/8 M8 19 101415387 14299 5/16
101804736 M2C-54 54 3 1/4 M8 19 101414321 14324 3/8
101783423 M2C-55 55 3 1/4 M8 19 101414320 14349 7/16
101784043 M2C-60 60 3 1/2 M8 19 101394914 14374 1/2
101782330 M2C-65 65 3 3/4 M8 19 101425596 14399 9/16
101783424 M2C-70 70 4 M8 19 101425598 14424 5/8
101783567 M2C-75 75 4 1/4 M8 19 101412979 14449 3/4
101783425 M2C-80 80 4 1/4 M8 19 101413322 14474 7/8
101439451 14499 1
101412977 14574 1 1/4
101392616 14624 1 1/2
® ®
Metric Square Steel Keystock
Metric square keystock is used to provide driving torque between shafts and
Finish: None pulleys, gears, sprockets, etc.
Inch Aluminum Recessed Screw: No Features:
• True metric keystock that conforms to metric
I.D. O.D. Width keyway specifications
Item No. Mfr. No. (in) (in) Screw Size (in)
• Gold dichromate plating makes product
101966657 2C-025-A 1/4 11/16 4-40 UNC 5/16 identification easy
101947448 2C-031-A 5/16 11/16 4-40 UNC 5/16 • Material is high quality, cold-drawn steel
101977193 2C-037-A 3/8 7/8 6-32 UNC 3/8 • Used to accommodate metric keyways
101980294 2C-043-A 7/16 15/16 6-32 UNC 3/8 • DIN 6880
101783164 2C-050-A 1/2 1 1/8 8-32 UNC 13/32
101808463 2C-062-A 5/8 1 5/16 10-32 UNF 7/16
101783448 2C-075-A 3/4 1 1/2 1/4-28 UNF 1/2 Finish: Gold Dichromate Plated
101952041 2C-087-A 7/8 1 5/8 1/4-28 UNF 1/2 Length: 12 in
101781093 2C-100-A 1 1 3/4 1/4-28 UNF 1/2 Material: Carbon Steel
101949520 2C-112-A 1 1/8 1 7/8 1/4-28 UNF 1/2
Size
101949422 2C-118-A 1 3/16 2 1/16 1/4-28 UNF 1/2
Item No. Mfr. No. (mm)
101781712 2C-125-A 1 1/4 2 1/16 1/4-28 UNF 1/2
101415389 04011 4
101951180 2C-131-A 1 5/16 2 1/4 1/4-28 UNF 9/16
101439456 04016 5
101908495 2C-137-A 1 3/8 2 1/4 1/4-28 UNF 9/16
101439457 04021 6
101947445 2C-143-A 1 7/16 2 1/4 1/4-28 UNF 9/16
101393565 04031 8
101781097 2C-150-A 1 1/2 2 3/8 1/4-28 UNF 9/16
101414994 04036 10
101946215 2C-162-A 1 5/8 2 5/8 5/16-24 UNF 11/16
101392623 04041 12
101970486 2C-168-A 1 11/16 2 3/4 5/16-24 UNF 11/16
101413241 04046 14
101970488 2C-175-A 1 3/4 2 3/4 5/16-24 UNF 11/16
101439455 04051 16
101951182 2C-187-A 1 7/8 2 7/8 5/16-24 UNF 11/16
101413324 04056 18
101977192 2C-193-A 1 15/16 3 5/16-24 UNF 11/16
101413152 04060 20
101807814 2C-200-A 2 3 5/16-24 UNF 11/16
101970487 2C-218-A 2 3/16 3 1/4 5/16-24 UNF 3/4
254 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
32 Piece Square Zinc-Plated
® ®
Square Stainless Steel Keystock ® ® Steel Keystock Assortment
Stainless steel keystock is an excellent alternative to steel keystock when corrosion
resistance is a concern. Set Contents for 14680
Features:
• Most tolerances on dimensions are undersized Size (in) Qty.
• Food and marine applications 12 in Zinc-Plated Square Keystock
• ASTM-A-582 Condition A Type 303 3/16 6
• ASTM-A-479 Type 304 Features: 1/4 6
• QQS-763 Type 304 • Used to provide driving torque between shafts 5/16 6
and pulleys, gears, sprockets, etc. 3/8 6
Finish: Unplated • Oversized to ensure tight fits in keyways for
Length: 12 in 7/16 4
positive, zero backlash power transmission
Material: 300 Series Stainless Steel 1/2 4
• Sizes marked on each piece
• ASTM A-108
Size Finish: Zinc Plated
Item No. Mfr. No. (in) Material: Steel
101395792 57501 1/8
101395690 57502 3/16 Length
Item No. Mfr. No. (in)
101386073 57503 1/4
101427110 57504 5/16 101460640 14680 12
101403355 57505 3/8
101381166 57506 7/16
101393391 57507 1/2
101380659 57508 5/8 ® ®
Plated Steel Step Keystock
101381167 57509 3/4
101381168 57510 7/8
Overall Width
101395794 57511 1
Height
to Step
Step Height
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 255
General Industrial Products
Metric Rectangular
Plated Rectangular Steel Keystock
® ® ® ® Plated Steel Keystock
Used to provide driving torque between shafts and pulleys, gears, sprockets, etc.
Used to provide driving torque between shafts and pulleys, gears, sprockets, etc.
Features:
• Most tolerances on dimensions are oversized
to ensure tight fits in keyways for positive, zero
backlash power transmission
• Used for new machinery, general maintenance and Finish: Zinc Plated
shop repairs Length: 12 in
• Meets ASTM A-108 Material: Carbon Steel
® ®
Rectangular Metric Stainless Steel Keystock
Finish: Unplated
Length: 12 in
Material: Stainless Steel
Width Height
Item No. Mfr. No. (mm) (mm)
110300931 53305 8 7
110300932 53315 10 8
Features: 110300933 53325 12 8
• Excellent alternative to steel keystock when 110300934 53330 12 10
corrosion is a concern
110300935 53340 14 9
• Produced from A2 stainless steel to
undersized specifications 110300945 53350 16 10
• Available in one meter lengths 110300946 53360 18 11
• Sold by individual pieces 110300947 53370 20 12
® ®
Sof’ Shoe Slotted Shim
Has a 12% flat compression under standard bolt torque, yet will absorb the angularity of nearly half its thickness. Made
of proprietary elastomer with flow and set characteristics for filling irregular gaps.
Features: Applications:
• Solves angular soft foot alignment problems • Motors
• Stable to 250 °F • Pumps
• Can be used together in the alignment process with stainless slotted shim • Generators
• Sof’ Shoe shim cures angular soft foot and extends bearing and motor life • Turbines
Thickness 5/8 in Slot Width 7/8 in Slot Width 1 1/4 in Slot Width 1 5/8 in Slot Width
(in) Color Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
0.020 Blue 101395738 49105 101399805 49110 101353701 49115 101353702 49120
0.045 Yellow 101427166 49125 101412802 49130 101391233 49135 101353703 49140
256 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
® ®
UP-TOWER™ Shim Assortment
Features: Includes:
• Lightweight 8 lb assortment contains a variety of 28 shims • (8) 0.5 mm: red
• Color-coded shim tabs aid in quick identification of thickness • (8) 1.0 mm: green
• Color-coded chart helps to ensure you have the RIGHT STUFF for your job • (8) 1.25 mm: blue
• Durable, high visibility canvas bag: orange bag with reflective strip organizes, • (4) 2.0 mm: plain
secures and protects shims
• Stop-the-drop ring for safer access: shims stay secure while bag is hung open
• Dual closing systems, both Velcro® and a clip for safer handling
• Heavy-duty shoulder strap
• Refills available
® ®
Master Assortment Slotted Shim Kit
Includes:
• 300 pieces in total packaged in a durable metal box
• Five pieces of each 0.020” and 0.045” thick Sof’ Shoe shims in all four sizes: A – 2” x 2”, B – 3” x 3”, C – 4” x 4”, D – 5” x 5”
• Five pieces of each size: 0.001”, 0.002”, 0.003”, 0.004”, 0.005”, 0.010”, 0.015”, 0.020”, 0.025”, 0.050”, 0.075”, 0.100”, 0.125” stainless steel
slotted shim in all four sizes: A – 2” x 2”, B – 3” x 3”, C – 4” x 4”, D – 5” x 5”
® ®
Decimal Series Stainless Steel Slotted Shim Kit
Features:
Mini Assortment Kit Material: 300 Series Stainless Steel
• Tabs make the shim placement easier and safer
• Tabs eliminate need to place hands under machinery Shim Size Slot Width
during installation or removal of shims Item No. Mfr. No. (in) (in) Pkg. Qty.
• Hole in tab makes removal even easier
• Each shim is permanently marked with thickness 101442870 42940 A (2 x 2) 5/8 130
• Shims conform to standard bolt and stud sizes 101459964 42950 B (3 x 3) 7/8 130
• ASTM A-666 101445055 42960 C (4 x 4) 1 1/4 130
101441336 42970 D (5 X 5) 1 5/8 130
Applications:
• Motors Full Assortment Kit
• Pumps
• Generators Shim Size Slot Width
Item No. Mfr. No. (in) (in) Pkg. Qty.
100848672 42900 A (2 x 2) 5/8 260
100848673 42910 B (3 x 3) 7/8 260
Qty. of each Size
100848674 42920 C (4 x 4) 1 1/4 260
Size Mini Assortment Full Assortment Shop Assortment 100848675 42930 D (5 X 5) 1 5/8 260
Assortment Kit
(in) Kit Kit Kit
0.001 10 20 10 4
0.002 10 20 — 4 Shop Assortment Kit
0.003 10 20 10 4 Shim Size Slot Width
0.004 10 20 — 4 Item No. Mfr. No. (in) (in) Pkg. Qty.
0.005 10 20 10 4 100848676 42945 A (2 x 2) 5/8 80
0.010 10 20 10 4 100848677 42955 B (3 x 3) 7/8 80
0.015 10 20 10 4
0.020 10 20 10 4
Assortment Kit
0.025 10 20 10 4
0.050 10 20 — 4 Shim Size Slot Width
0.075 10 20 10 4 Item No. Mfr. No. (in) (in) Pkg. Qty.
0.100 10 20 — 4 101414119 42925 E (6 X 6) 2 52
0.125 10 20 — 4 101400624 42935 H (8 x 8) 2 3/8 52
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 257
General Industrial Products
® ®
Decimal Series Stainless Steel Slotted Shim
Features:
• Tabs make the shim placement easier and safer
• Tabs eliminate need to place hands under machinery during installation or
removal of shims
• Hole in tab makes removal even easier
• Each shim is permanently marked with thickness
• Shims conform to standard bolt and stud sizes
• Eliminates misalignment of expensive machinery
• ASTM A-666
Applications:
• Motors
• Pumps
• Generators
Material: 300 Series Stainless Steel
Thickness 5/8 in Slot Width 7/8 in Slot Width 1 1/4 in Slot Width 1 5/8 in Slot Width
(in) Pkg. Qty. Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
0.001 20 100848681 42205 100848706 42305 100848732 42405 100848758 42505
0.002 20 100848683 42210 100848707 42310 100848733 42410 100848759 42510
0.003 20 100848688 42215 100848708 42315 100848734 42415 100848766 42515
0.004 20 100848689 42220 100848709 42320 100848735 42420 100848767 42520
0.005 20 100848687 42225 100848715 42325 100848741 42425 100848765 42525
0.010 20 100848691 42230 100848717 42330 100848743 42430 100848769 42530
0.015 10 100848693 42235 100848719 42335 100848745 42435 100848771 42535
0.020 10 100848695 42240 100848721 42340 100848747 42440 100848773 42540
0.025 10 100848697 42245 100848723 42345 100848749 42445 100848775 42545
0.050 5 100848699 42250 100848725 42350 100848751 42450 100848777 42550
0.075 5 100848701 42255 100848727 42355 100848753 42455 100848779 42555
0.100 5 100848703 42260 100848729 42360 100848755 42460 100848781 42560
0.125 5 100848704 42265 100848731 42365 100848757 42465 100848783 42565
Features:
Features:
• For easy identification, shim has the material
• Color coded to identify thickness, which eliminates
type, size, thickness and tracing lot number
need for micrometer
printed on the surface
• Resists oil
• Made from full hard, cold rolled, 300 series
• Easy to cut
stainless steel
• 0.0005” to 0.005” polyester material
• AISI-T302
• 0.0075” to 0.030” vinyl material
• SAE-30302
• ASTM A-666
Set Contents for 44905, 44910 and 44915
Thickness (in) Color
Shim Stock 6 in x 50 in – Roll Material: 300 Series Stainless Steel
0.0005 Silver Thickness
0.001 Amber Item No. Mfr. No. (in)
0.0015 Purple 100848942 22L1 0.001
0.002 Red 100848950 22L2 0.002
0.003 Green 100848953 22L3 0.003
0.004 Tan 101393404 22L4 0.004
0.005 Blue 101461763 22L5 0.005
0.0075 Matte 100848976 22L10 0.010
0.010 Brown 100848981 22L12 0.012
0.0125 Black 100848986 22L15 0.015
0.015 Pink 100848989 22L20 0.020
0.020 Yellow 100848995 22L25 0.025
0.025 White 101444222 22L31 0.031
0.030 Coral
Length: 20 in 12 in x 50 in – Roll
Material: Plastic
Pkg. Qty.: 14 Thickness
Item No. Mfr. No. (in)
Width 101413318 22LL2 0.002
Item No. Mfr. No. (in) 101413955 22LL5 0.005
101442875 44905 5 101413229 22LL10 0.010
101445067 44910 10 101393561 22LL15 0.015
101356108 44915 20 101414986 22LL20 0.020
258 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
*
® ®
Steel Shim Stock ® ®
Brass Shim Stock
Features:
• For easy identification, shim has the material type,
size, thickness and tracing lot number printed on
the surface
• Made from full hard, cold rolled, low carbon
1008-1010 steel
• AISI-1008/AISI-1010
Features:
• For easy identification, shim has the material type, size, thickness and tracing lot
Material: Low Carbon Steel number printed on the surface
6 in x 100 in – Roll • Made from half hard, cold rolled, 260 alloy
Thickness • SAE-CA-260
Item No. Mfr. No. (in) • CDA-260
101414316 16A1 0.001 • ASTM B-19, B-36
101400613 16A2 0.002 Material: 260 Alloy Brass
101415386 16A3 0.003 6 in x 25 in – Flat Sheet
101415384 16A4 0.004 Thickness
101392703 16A5 0.005 Item No. Mfr. No. (in)
101392702 16A7 0.007 101427127 17SY20* 0.0200
100848970 16A8 0.008 101386177 17SY25* 0.0250
101413233 16A10 0.010 Two pieces per package.
101392613 16A20 0.020
6 in x 60 in – Roll
Thickness
Item No. Mfr. No. (in)
101391301 17SX5 0.0050
101396011 17SX10 0.0100
101391421 17SX15 0.0150
6 in x 100 in – Roll
Thickness
Item No. Mfr. No. (in)
100848941 17S1 0.0010
6 in x 12 in – Flat Sheet - Assortment Material: Low Carbon Steel 100848946 17S1X 0.0015
100848940 17S2 0.0020
Thickness Pkg. Qty.
Item No. Mfr. No. (in) (Pieces) 101444991 17S3 0.0030
100848955 17S4 0.0040
0.0010, 0.0015,
0.0020, 0.0030, 100848959 17S5 0.0050
0.0040, 0.0050, 100848974 17S10 0.0100
101377898 16AF12 12 100848978 17S12 0.0120
0.0060, 0.0070,
0.0080, 0.0100, 100848983 17S15 0.0150
0.0120, 0.0150 100848987 17S20 0.0200
0.0010, 0.0015, 100848992 17S25 0.0250
0.0020, 0.0030, 100848996 17S31 0.0310
0.0040, 0.0050,
0.0060, 0.0070,
101394911 16AF15 15
0.0080, 0.0100,
0.0120, 0.0150,
0.0200, 0.0250,
0.0310
Includes one sheet of each thickness.
Prefer the Applied® 6 in x 12 in – Flat Sheet - Assortment Material: 260 Alloy Brass
Thickness
Digital Catalog? Item No. Mfr. No. (in)
0.0010, 0.0015, 0.0020,
0.0030, 0.0040, 0.0050,
Download the FREE catalog mobile 101393401 17SF12
0.0060, 0.0070, 0.0080,
0.0100, 0.0120, 0.0150
app and get access anytime or Includes one sheet of each thickness.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 259
General Industrial Products
3M™ Multi-Purpose Duct Tape 3900 3M™ Heavy-Duty Duct Tape 3939
Features:
• High-tack adhesive for good quick stick
• Tears easily by hand
• Individually wrapped for easy identification and to
preserve roll integrity
• Sealing, holding, protecting, bundling, color coding
• General shop and temporary repair activities
Features:
• Offers easy tear and conformability
Width Length
• Individual roll wrap preserves integrity of the roll for less waste
Item No. Mfr. No. (mm) (m) Color
• High-tack adhesive for good quick stick to many surfaces
102171267 00-051131-06976-3 48 54.8 Silver • Polyethylene film over cloth scrim that resists moisture to prolong tape bond
• Hanging polyethylene drapes for containment activities, industrial masking and
sandblast overspray protection
• Patching, reinforcing, moisture proofing, sealing, splicing and temporary repair
• Useful in convention industry for holding and seaming carpet padding, taping
down cords and hinging poster board panels
• Meets UL® 723, ASTM E84
3M™ All Purpose Duct Tape DT8 Width Length
Item No. Mfr. No. (mm) (m) Color
101841232 00-051131-06975-6 48 54.8 Silver
Constructed of polyethylene film laminated to cloth with
a natural rubber adhesive, this aggressive tape resists
curling and tears off the roll cleanly even when used
in challenging jobs. 3M™ All Purpose Duct Tape DT8 is
designed to provide a versatile, conformable, quick stick
solution for demanding applications.
3M™ High Performance Green
Width Length Thickness Masking Tape 401+
Item No. Mfr. No. (mm) (m) (mil)
116259180 00-689330-17225-2 48 54.8 8
Features:
• Ideal for high performance industrial painting,
including two-tone color application on trucks,
buses, trailers, trains, fire trucks, ambulances
and airplanes
• Highly conformable to many surfaces
• Superior adhesion to metal, rubber, glass and
3M™ Heavy Duty Duct Tape DT11 plastic
• Removes cleanly in one piece with no residue
• Resists paint bleed-through
• Creates sharp paint lines
Constructed of polyethylene film laminated to cloth with
a natural rubber adhesive, this tough tape resists curling
and tears off the roll cleanly for a variety of applications. Width Length Thickness
3M™ Heavy Duty Duct Tape DT11 is designed to provide a Item No. Mfr. No. (mm) (m) (mil)
formidable, reliable solution for everyday challenges and 106269531 00-051115-64761-1 24 55 6.7
adheres to numerous substrates, including plastic. 106273469 00051115647628 36 55 6.7
106296879 00-051115-64763-5 48 55 6.7
260 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
3M™ General Use Masking Tape 201+ Scotch® High Tack Box
Sealing Tape 371+
Applications:
• Throw-away applications
• General-purpose use
Scotch® Filament Tape 897
Brush Trim Plastic Wood
Features: Thickness Length Width
• Polypropylene film (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
• Abrasion and moisture resistant 1 101415115 86002 101440858 86016
• High tensile strength (170 lb/in width) 5/16 1 1/2 1 1/2 101443997 86003 101415117 86017
• Allows printing and illustrations to be seen through tape 2 101414279 86004 101476946 86018
• Good shear and initial adhesion 2 1/2 101442549 86005 — —
• Good aging 3/8 1 1/2
3 101440857 86006 101414280 86019
• Protective of filaments and adhesive to provide longer
11/16 2 1/4 4 101443458 86007 101416807 86020
package life
• Maximizes package performance when exposed to outdoor
and humid environments
• Good holding under wide range of application conditions
with minimum amount of tape
• Holds with minimum rubdown
• Boxes remain closed for longer periods of time Pro Curved Handle Scratch Brush
• Light-duty strapping, building and reinforcing
Adhesion Strength: 50 oz/in
Thickness: 5 mil Osborn Scratch Brushes feature skilled workmanship and premium-quality
staple set wire to provide outstanding cleaning and a high degree of fatique
Width Length resistance. The blocks of Osborn Scratch Brushes are kiln-dried hardwood
Item No. Mfr. No. (mm) (m) Color for maximum tuft retention, even when used in severe applications. Uniform
distribution of fill materials and firmly anchored tufts combine to provide a long,
101383669 00-021200-86524-4 18 55 Clear
effective brush life.
101400742 00-021200-86525-1 24 55 Clear
Features:
• Kiln-dried
• Maximum tuft retention
• Smooth machined finish
• Hang-up hole for convenient
Scotch® Box Sealing Tape 375 storage
Brush Length: 6 in
Stainless Steel Trim Length: 1 1/8 in
Features:
• Pressure-sensitive hot melt rubber-resin adhesive Overall
• Biaxially oriented polypropylene backing Length Block Width
• Adheres instantly to most surfaces, including cartons Item No. Mfr. No. (in) Wire Rows (in)
containing high levels of recycled content 101444424 83101a 13 11/16 4 x 19 1 1/8
• Strongest conformable backing with the highest edge tear 101442548 83007 13 3/4 3 x 19 15/16
and split resistance
• Superior performance in a wide range of environments and WARNING: Cancer - www.P65Warnings.ca.gov.
applications ensures reliable closures
• Considered water-resistant per ASTM D5570 Steel
• Complies with RoHS restrictions on the use of certain Overall
hazardous substances in electrical and electronic equipment Length Block Width
• Use for box sealing, splicing, recouperage and other Item No. Mfr. No. (in) Wire Rows (in)
demanding packaging applications 101414278 83100b 13 11/16 4 x 19 1 1/8
• Meets CID A-A-1684B and ASTM D5486 Type III
101442023 83001 13 3/4 3 x 19 15/16
Width Length
Item No. Mfr. No. (mm) (m) Color WARNING: Cancer - www.P65Warnings.ca.gov.
a
Has scraper on brush.
102173255 00-021200-72406-0 48 50 Clear b
Heavy duty.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 261
General Industrial Products
Features:
• Blocks are kiln-dried hardwood for maximum tuft retention even in the most
severe applications
• Uniform distribution of fill materials
• Firmly anchored tufts
• Wire provides outstanding cutting ability Scotch-Brite™ General Purpose Hand Pad 7447
• Extremely high degree of fatigue resistance
• High quality, staple-set wire provides long, effective brush life Applications:
• Smooth, machined finish provides excellent comfort in use • Scuff sanding, cleaning, finishing and deburring
• Hang-up hole for convenient storage • Deburring metals and ceramics
Brush Length: 6 in
• Cleaning machinery
Steel Trim Length: 1 1/8 in
Size: 6 in x 9 in
Overall Color: Maroon
Length Block Width Grit: Very Fine
Item No. Mfr. No. (in) Wire Rows (in) Abrasive Material: Aluminum Oxide
101443172 54015 13 11/16 3 x 19 31/32 Pkg. Qty.: 20
101414081 54016a 13 11/16 4 x 19 1 1/4
Item No. Mfr. No.
WARNING: Cancer - www.P65Warnings.ca.gov.
a
Heavy duty. 101948190 00-048011-04029-5
262 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
*
Item No. Mfr. No. Item No. Mfr. No. Cell Type Voltage Pkg. Qty.
102179933 00-048011-04028-8 102185916 EN92* AAA 1.5 24
102155951 EN91* AA 1.5 24
102185917 EN93* C 1.5 12
102167621 EN95* D 1.5 12
101963528 EN529 6V 6 1
102144733 EN22* 9V 9 12
Bear-Tex products are made of a non-woven nylon web impregnated with abrasive
grain and resin. A variety of abrasives, grit sizes, and backing materials give the Stylus Pro® Flashlight
user an extensive and superior product offering.
Features:
• Flexible
• Non-loading
• Conforms to work surface
• Reduces waste
Applications:
• Cleaning
• Deburring
• Blending
• Polishing Material: Aluminum Oxide
• Finishing Size: 6 in x 9 in Features:
• A sleek pen light that conveniently fits in a pocket
Item No. Mfr. No. Color Grit Type • Ideal for anyone that needs a compact, durable light to carry on a daily basis
101648226 66261077700 Maroon Very Fine General Purpose • White C4® LED delivers 100 lumens; 690 candela; runs 6.5 hours
101615685 66261074700 Maroon Very Fine General Purpose Plus - Long Life
• Push button tail switch – momentary or constant on operation
• Includes two “AAA” alkaline batteries and tear-resistant nylon holster
101647881 66261074000 Dark Tan Medium Heavy Duty
• Type II MIL-SPEC abrasion and corrosion-resistant anodized aircraft aluminum
construction with unbreakable, scratch-resistant polycarbonate lens
• IPX4 water-resistant
• About the size of a marker, it conveniently fits in your pocket and a removable pocket
clip ensures it stays in place
• Limited lifetime warranty
Lumen
Output
Item No. Mfr. No. Battery Size Bulb (lm/ft2)
104480953 66118 AAA 1 C4® LED 100
UltraPro Alkaline Batteries
Features:
• Specially engineered for professional use
• Reclosable container helps organize and protect
batteries from damage and short circuiting
• Stackable packaging is easy to merchandise Need a source for on-site conveyor
• Proudly made in the United States
(AAA/AA/C/D only) belt installation, splicing or repairs?
• Ten-year power guarantee in storage
(five-year for 9V)
• Best used before date on battery
Applied® has field crews who are
• Mercury-free formula experienced and ready to travel.
Reclosable Storage Pak Visit Applied.com/rubber or
Cell Type
AAA
Voltage
1.5
Item No.
111020096
Mfr. No.
ALAAA-18PPJ
speak with your local
AA
C
1.5
1.5
111020095
111020001
ALAA-24PPJ
ALC-12PPJ
Applied® representative.
D 1.5 111020000 ALD-12PPJ
9V 9 111020092 AL9V-12PPJ
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 263
General Industrial Products
Flashlight Spotlight
Strength Strength
Item No. Mfr. No. (lm) (lm)
112971672 68750 140 140
Features:
• All-purpose flashlight is designed for the broadest range of
lighting needs at the best value Features:
• Multi-function on/off push button switch lets you choose • All-purpose, non-conductive polymer flashlight is designed for the broadest range
three lighting modes and strobe; designed for extremely long of lighting needs at the best value
life; tested at 1 million actuations • Multi-function on/off push button switch lets you choose three lighting modes and
strobe; designed for extremely long life; tested at 1 million actuations
• Three modes and strobe: high for a bright super-bright beam - 350 lumens; 24,000 • Three modes and strobe: high for a bright super-bright beam: 26,000 candela peak
candela peak beam intensity; 310 meter beam distance; runs 2 hours; medium for beam intensity; 385 lumens; runs 2 hours; medium for bright light and longer run
bright light and longer run times – 175 lumens; 12,000 candela peak beam intensity; times: 13,000 candela peak beam intensity; 195 lumens; runs 3.75 hours; low for
219 meter beam distance; runs 3.75 hours; low for light without glare and extended when a less intense beam is needed and for extended run times: 6,500 candela peak
run times – 85 lumens; 6,000 candela peak beam intensity; 155 meter beam distance; beam intensity; 95 lumens; runs 7.25 hours; strobe for disorienting or signaling
runs 7.25 hours; strobe for disorienting or signaling your location; runs 5.5 hours your location; runs 5.5 hours
• Deep dish parabolic reflector produces a concentrated beam with optimum • Deep dish parabolic reflector produces a concentrated beam with optimum
peripheral illumination peripheral illumination; optimized electronics provides regulated intensity
• C4® LED technology, impervious to shock with a 50,000 hour lifetime • C4® LED technology
• Regulated run time provides consistent performance throughout battery life • Shock-proof with a 50,000 hour lifetime
• 3-cell, 3.6 V Ni-Cd sub-C battery, rechargeable up to 1,000 times • Fits existing Stinger snap-in chargers; compact and mountable in any position
• Machined aircraft aluminum body with non-slip rubberized comfort grip • 3-cell, 3.6 V Ni-MH sub-C battery, rechargeable up to 1,000 times
• IPX4 water-resistant; 1 meter impact resistance tested • Super tough, non-conductive nylon polymer with non-slip rubberized comfort grip
• Unbreakable polycarbonate lens with scratch-resistant coating • O-ring sealed, unbreakable polycarbonate lens with scratch-resistant coating
• Includes anti-roll rubber ring • IPX4 water resistant; 3 meter impact resistance tested
• Serialized for positive identification • Serialized for positive identification
• Limited lifetime warranty • Limited lifetime warranty
• Assembled in the USA • Assembled in the USA
264 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
LED Headlamp
Features:
• Push button switch is easy to use when wearing gloves and is • Durable, co-molded rubber body
recessed to protect it from inadvertent activation • IPX4 rated for water resistance; 2 meter impact resistance tested
• Low level battery indicator visible in the face cap of each light • Adjustable elastic head strap and rubber hard hat strap
• Red LED flashes when battery voltage is low and batteries are • Limited lifetime warranty
near the end of their usable life • C-ETL-US classified class I, division 2, groups A, B, C, D; class II,
• LED is located in the reflector in between the “Low Batt” marking division 2, groups F, G; class III, T5
and functions while the light is on • Most models meet applicable European community directives
• 90° tilting head features a robust ratcheting system; prevents
neck fatigue
Lumen Output
Beam Type Bulb (lm/m2) Item No. Mfr. No. Battery Size Modes
Spot (1) LED 150 102089094 61301 ARGO YLO 3 AAA High, Medium or Low
(1) LED 180 113821421 61703 Rechargeable High, Low or Strobe
Flood
(7) LED 120 101484024 61052 3 AAA High, Medium or Low
(4) LED 80 104272449 61050 3 AAA High, Medium or Low
Spot to Flood
2 LED 200 113764155 61422 3 AAA High or Low
RM Series two-way radios have the business smarts to help you work better together; they combine outstanding quality with excellent affordability. With crisp, clear audio
throughout the workplace and exceptional durability, RM Series radios won’t quit in high noise, harsh conditions or hard use.
Features: Includes:
• Coverage - up to 250,000 sq ft and 20 floors • Rechargeable Li-Ion battery
• Battery life - up to 15 hours per charge • Drop-in charging tray
• Selectable frequencies - VHF radios have 27 preprogrammed frequencies, • Charging adapter
MURS have five frequencies and UHF have 89 frequencies • Swivel belt holster
• Voice Annunciation - ease of programming and channel announcement • Owner’s manual
• Narrowband compliant - only operates on 12.5 kHz • Two-year, over-the-counter exchange warranty
• Computer programmable software - available to easily program radios (optional
accessory – programming cable required)
• Eight channel radios offer NOAA (weather)
RM Two-Way Radios
Radio Features RMM2050 RMU2040 RMU2080 RMU2080D RMV2080
Frequency Band MURS UHF UHF UHF VHF
Power/Watts 2 W 2W 2 W 2 W 2 W
Chawnnels (default/capable) 5 2/4 8 8 8
Interference Eliminator Codes (PL/DPL) 39/83 39/83 39/83 39/83 39/83
Pre-Programmed Frequencies 5 89 89 89 27
Cloning Capability Y Y Y Y Y
Vox – w/ Three Sensitivity Settings Y Y Y Y Y
Battery Life – (between charges) (hrs) 15 15 15 15 15
Channel Annunciation Y Y Y Y Y
Scan w/ Edit List Y Y Y Y Y
Wt. (oz) 8.6 8.6 8.6 9.0 8.9
Range – Indoors (Steel/Concrete) 220,000 sq ft 250,000 sq ft 250,000 sq ft 250,000 sq ft 220,000 sq ft
Range – Multi-Level Buildings 13 floors 20 floors 20 floors 20 floors 13 floors
Replaces RDX Model RDM2020; RDM2080D RDU2020 RDU2080D RDU2080D RDV2020; RDV2080D
Power
Item No. Mfr. No. (W) No. of Channels Frequency Range
110305073 RMM2050 2 5 MURS
110305074 RMU2040 2 4 UHF
110305075 RMU2080 2 8 UHF
110305076 RMU2080D 2 8 UHF
110305077 RMV2080 2 8 VHF
All RM Series radios except RMM2050 require an FCC License.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 265
General Industrial Products
Features:
• Coverage - increased by 20% over RM Series radios - up to 350,000 sq. ft. and 30 floors (range depends on surrounding terrain and conditions)
• No FCC licensing required
• Battery Life - up to 14.5 hours per charge
• 1:Many and 1:1 Calling - allows user to speak directly with one person in their contact list
• Digital Audio Quality - stays louder and clearer everywhere you have coverage
• No monthly fees
• New Technology - digital vs. analog - not compatible with CLS, RDX or RM Series radios
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Power
Item No. Mfr. No. No. of Channels (W) Frequency Range
115484672 DTR600 30 1 900 MHz ISM Frequency-Hopping Spread Spectrum
115484703 DTR700 50 1 900 MHz ISM Frequency-Hopping Spread Spectrum
Features: Includes:
• Battery Life - Li-Ion rechargeable battery lasts up to 18.5 hours • Rechargeable ultra-high capacity Li-Ion battery
• Selectable Frequencies - VHF radios have 27 preprogrammed frequencies and • Drop-in charging tray
UHF have 89 frequencies • Charging adapter
• Interference Eliminator Codes - 39 PL codes and 83 digital private line codes • Belt clip
(DPL) • Removeable antenna
• Computer programmable software - available to easily program radios (optional • Owner’s manual
accessory – programming cable required) • Two-year, over-the-counter exchange warranty
• Cloning Capabilities - One button cloning with multi-unit charger (optional
accessory) or radio to radio via charging trays (optional accessory - cloning cable
required)
• Drop-In Charging Tray - ease of desktop charging
• VOX - hands-free transmissions with VOX enabled accessories
• Narrowband compliant
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
RDU4100
RDX Two-Way Radios
Radio Features RDU4100* RDU4160D* RDV5100*
Frequency Band UHF UHF VHF
Power/Watts 4W 4W 5W
Channels 10 16 10
Interference Eliminator Codes (PL/DPL) 39/83** 39/83** 39/83**
Pre-Programmed Frequencies 89** 89** 27**
Cloning Capability Y Y Y
Vox – w/ Three Sensitivity Settings Y Y Y
Battery Life – (between charges) (hrs) 18.5 18.5 18.5
Scan w/ Edit List Y Y Y
Wt. (oz) 10.3 10.3 10.3
Coverage Area
Range - Indoors Up to: Up to: Up to:
Steel/Concrete*** 350,000 sq ft 350,000 sq ft 300,000 sq ft
Multi-Level Buildings*** 30 floors 30 floors 18 floors
*Repeater capable.
**Indicates frequency and code are also computer programmable to match other radios.
***All ranges depend on surrounding terrain and conditions.
Power
Item No. Mfr. No. (W) No. of Channels Frequency Range
101477817 RDU4100 4 10 UHF
101523209 RDU4160D 4 16 UHF
101569026 RDV5100 5 10 VHF
All RDX Series radios require an FCC License.
266 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Power
Item No. Mfr. No. (W) No. of Channels Frequency Range
101856300 CLS1110 1 1 UHF
101856299 CLS1410 1 4 UHF
*
Two-Way Radio Accessories
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 267
General Industrial Products
*
Motorola offers a variety of two-way radios to meet the different needs of the end user. Below are
the most popular accessories for a number of different Motorola two-way radios. Your current item
may be a PMMN4013A, PMMN4013B or PMMN4013AR. The suffix may change, but as long as
you have the basic manufacturer number, the item is compatible with your radio. Other Motorola
accessories are available by contacting your local Applied® service center.
PMMN4013 PMPN4175 HNN9008
Features:
• Energy efficient cooling solution
• Larger drain allows for easy and effective maintenance
• Equipped with Kuul Comfort™ evaporative media, the highest quality evaporative media available
and made in the USA exclusively for Portacool products
• Liquid level indicator with automatic pump shutoff protects your product and investment
• Lifetime warranty on evaporative cooler housing against manufacturing defects and three year
warranty on all electrical components
• Made in the USA with domestic and global parts
PACJS2201A1 PACJS2501A1 PACJS2601A1
Water Air
Reservoir Delivery Height Width Depth
Item No. Mfr. No. (gal) (cfm) (in) (in) (in)
113873666 PACJS2201A1 20 2,400 42 29 27
113873665 PACJS2301A1 30 3,600 50 29 27
112756515 PACJS2401A1 50 4,500 59 40 24
112684809 PACJS2501A1 55 8,500 70 52 30
112601849 PACJS2601A1 60 12,500 77 63 30
112454475 PACJS2701A1 65 22,500 90 78 36
268 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Features:
• Designed to cool areas where airborne gas or debris is potentially combustible
• Equipped with sealed switches, cords, motors and pumps to prevent sparking
Features:
• Pedestal pole adjusts the center of the fan from 52” to 78” and bolts to a 27” diameter steel
dome base with five carriage bolts
• Mounts will fit any size TPI fan head (24” or 30”)
• 120 V, two-speed, 1-PH TEAO (totally enclosed air over) ball bearing and permanently
lubricated motor
• Pull chain switch operation
• Three-paddle blades have steel hub and aluminum finish
• Steel front and rear guards are powder coated with a silver finish, and includes self-locking
retaining clips
• ETL C/U.S. listed
ACMP ACMW
WARNING: This product can expose you to chemicals, including nickel and chromium, which to the State of California are known to cause cancer, birth defects and/or reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Single Phase
Air Air
Movement Movement
Size Motor Low High
Item No. Mfr. No. (in) (hp) Amps (cfm) (cfm)
101639886 ACH24 24 1/4 2.5 5,000 6,800
101654123 ACH30 30 1/4 2.7 6,000 7,900
101626662 IHP24H 24 1/3 3.0 5,200 7,000
101639885 IHP30H 30 1/3 3.4 6,200 8,200
WARNING: This product can expose you to chemicals, including nickel and chromium, which to the State of California are known to cause cancer, birth defects and/or reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Features:
• 120 V, three-speed, 1-PH TEAO (totally enclosed air over) sleeve bearing and permanently lubricated motor
• Rotation: Floor 360° vertical; Work station 360° vertical and horizontal directions
• Switch: Floor rocker switch; Work station pull chain
• 10 ft long 18/3 SJT-type, three-conductor cord with molded plug
• Steel front and rear guards are powder coated with a silver finish, and include self-locking retaining clips
Floor (F) Work Station (U) • ETL C/U.S. listed
Single Phase
Air Air Air Floor Fan Work Station Fan
Movement Movement Movement
Size Motor Low Medium High
(in) (hp) Amps (cfm) (cfm) (cfm) Item No. Mfr. No. Item No. Mfr. No.
12 1/12 1.1 800 1,100 1,400 — — 101643766 U12TE
18 1/8 2.2 1,200 2,000 2,900 101633737 F18TE 101654127 U18TE
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 269
General Industrial Products
Direct Drive Portable Blower
Features:
• Single phase, 120 V, ball bearing, permanently lubricated, 1,050 rpm, PSC type motor
• Rocker switch
• Corrosion resistant and dent-proof high density polyethylene housing with a black textured finish housing
• 8” rubber wheels
• 15’ long 18/3 SJT type three-conductor cord with molded plug
• ETL C/U.S. listed
• Meets OSHA standards
Single Phase
Fan Size Motor Air Movement Low Air Movement High
Item No. Mfr. No. Speeds (in) (hp) Amps (cfm) (cfm)
101654126 PB36D 2 36 1/3 5.6 9,000 12,500
101933877 PB42D 1 42 1/2 6.0 15,600 15,600
WARNING: This product can expose you to chemicals, including nickel and chromium, which to the State of California are known to cause cancer, birth defects and/or reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Single Receptacle Quad Industrial Receptacle Duplex Outlet Box w/ GFCI (F) LED Light
Features:
• Easy to mount and structurally strong, the power cord and light cord reels have robotically welded heavy gauge steel frame that attaches to most structurally sound surfaces
• For indoor, non-weather tight applications only
• Reinforced steel base offers maximum strength and consistent quality
• Heavy-duty collector ring assures maximum conductivity current flow
• Declutching arbor virtually eliminates possibility of spring damage due to reverse winding
• Only the highest quality spring steel is used and conditioned to ensure there are no imperfections offering maximum service life
• Quality finished, corrosion-resistant, powder-coated components offer the maximum protection from premature corrosion
• UL/CSA approved Volts: 125
Cord Length
AWG (ft) Item No. Mfr. No. Amps Accessory Type
115668743 L 3030 123 3 15 Single Receptacle
30 115668745 L 3030 123 7Q 20 Quad Industrial Receptacle
115668746 L 3030 123 X 20 Flying Lead
12
45 114470237 L 4545 123 3A 20 Single Receptacle
114470251 L 70100 123 3 15 Single Receptacle
100
114470256 L 70100 123 7 15 Duplex Outlet Box w/ GFCI (F)
45 113208639 L 4545 123 7 15 Duplex Outlet Box w/ GFCI (F)
12/3 111368522 L 5550 123 7 15 Duplex Outlet Box w/ GFCI (F)
50
102192465 L 5550 123 3 15 Single Receptacle
16 50 114470222 L 4050 163 10 13 LED Light
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
Technical Training
Properly trained maintenance workers prevent and reduce costly equipment downtime.
MaintenancePRO® courses from Applied Industrial Technologies offer training on
maintenance, troubleshooting, component application and failure analysis. Courses
can also be customized to specific needs.
Learn More: Applied.com/training
270 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
AkroBins® Storage Bin
Features:
• Controls inventories, shortens assembly times and minimizes parts handling
• Securely stack atop each other, sit on shelving and hang from Akro-Mils racks, panels, rails and carts
• Molded out of high density polypropylene; AkroBins® are unaffected by weak acids and alkalis
• Sturdy, one-piece construction is water, rust and corrosion-proof
• Guaranteed
• Autoclave up to 250 °F
• Full width hanger lip supports heavy loads when suspended from hanging rails or louvered panels
• Reinforced side-rib design
• Extra wide stacking ledge
• Large front label slot
• Curved bottom hopper makes it easy to retrieve small parts
• Antislide stop
• Optional dividers increase versatility
Shelf Bin
Features:
• Outlasts corrugated bins • Built-in rear hanglock allows bin to tilt out for complete access
• Superior construction • Molded-in label holder
• Durable polypropylene bins • Optional dividers
• Waterproof and unaffected by grease or oil • Works with 12”, 18” and 24” deep shelving and vertical storage and
• Wide hopper front allows easy access retrieval units
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 271
General Industrial Products
Features:
• Heavy-duty, all welded 14 gauge steel
• 1 1/2” lip on top work surface prevents parts
from falling off during transport
• Louvered panels on two ends, accommodates
Hook-on Bins® and metal Hook-On Trays (bins
and trays sold separately)
• Heavy-duty handle makes transport easy, adds
Color: Gray 6” to overall width of cart
No. of Drawers: 4 • (8) 23” removable rods accommodate
No. of Shelves: 1 wire spools
• 7 1/2” between rods, larger spools can be
Depth Height Width
Item No. Mfr. No. (in) (in) (in)
accommodated if some rods are removed
• Recessed rods allow protection of spools
112526818 SFWS-392955-95 39 52 7/8 29 during transport
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov. • Four wire guides hang below the work surface for ease in cutting wire
• Four 5” x 1 1/4” polyurethane bolt on casters; two rigid and two locking swivel
• Ships fully assembled
• Durable gray powder coat finish is rust and acid resistant
• Allows for multiple types of wire, or other spooled items to be efficiently
organized and mobile
• Transportable in trucks and vans to outfit different jobs
• Great for “5-S” organization and lean initiatives
• Gain efficiency and space
• Perfect for maintenance facilities, garages and construction sites
Mobile Shop Desk Cart
Color: Gray
Capacity: 1,200 lb
Features:
Depth Height Length
• Heavy-duty all welded steel construction Item No. Mfr. No. (in) (in) (in)
• Provides an organized work area that easily
moves anywhere you need it 112526598 MWSR8-LP-95 18 46 26
• Drawers have ball bearing slides and include WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
a cylinder lock and two keys
• Durable gray powder coat finish is rust- and
acid-resistant
Color: Gray
Capacity: 500 lb
Stock Cart
We Are… All Things
Industrial®
Features:
• 1 1/2” x 1/8” angle iron uprights for added strength
• Sturdy tubular push handle
• 5” x 1 1/4” bolt-on casters (2) swivel and (2) rigid
• 1 1/2” shelf lips up on all shelves prevent lost parts during transport
• 14 gauge steel shelves
• Textured powder coated finish is rust and acid resistant
• Ships fully assembled and ready for use
Color: Gray
Capacity: 1,200 lb
Learn more at Depth Height Length
Item No. Mfr. No. (in) (in) (in)
Applied.com/about 112526718 RSC-2436-2-95 24 37 5/8 36
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
272 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Features:
• 1 1/2” angle iron frame
Features:
• 12 gauge steel deck with reinforced channels underneath
• Top is 12 gauge thick reinforced steel
• 1 1/2” lip on deck prevents parts from falling off during
• Angle iron stiffeners under work surface and
transport
2” x 2” x 1/4” angle iron legs
• Choice of 16 gauge steel louvered panels or 16 gauge
• 7 gauge steel corner gussets for added
steel pegboards, all welded to both sides of the truck
strength
• Trucks that include louvered panels, accommodate all
• Back and end stops
sizes of Hook-on bins® (Hook-on bins® sold separately)
• Work surfaces are 39 1/2” above the floor
• Trucks that include pegboard panels have holes that
• All models include a 12 gauge steel lower shelf
are punched on 1” centers and accommodate standard
with 500 lb capacity
pegboard hooks (pegboard hooks are sold separately)
• (4) 3” locking swivel casters
• Heavy-duty handle makes transport easy
• Ships fully assembled ready for use
• 6” x 2” phenolic casters; (2) rigid and (2) swivel with side brakes
• Durable textured gray powder coat finish
• Deck is 8” above the floor
• Electrical strip with five outlets included
• Ships fully assembled
• Durable textured gray powder coat finish Color: Gray
Capacity: 2,000 lb
Machine Table
Color: Gray
Overall
No. of Shelf Width Shelf Depth Capacity Depth Height Width
Shelves (in) (in) (lb) Gauge Item No. Mfr. No. (in) (in) (in)
112526565 MTM182430-2K195 20 3/4 30 1/4 27 1/4
1 18 24 2,000 14 112526564 MTM182424-2K195 21 1/4 24 1/4 26 3/4
112526566 MTM182436-2K195 21 1/4 36 1/4 26 3/4
24 3,000 12 114526131 MT12G182430-3K295 20 3/8 30 26 3/8
18
36 3,000 12 114526133 MT12G183630-3K295 20 3/8 30 38 3/8
36 3,000 12 114526135 MT12G243630-3K295 26 3/8 30 38 3/8
24
2 48 3,000 12 114526086 MT12G244830-3K295 26 3/8 30 50 3/8
30 48 3,000 14 112526595 MTM304836-3K295 33 1/4 36 1/4 50 3/4
48 3,000 14 112526596 MTM364836-3K295 39 1/4 36 1/4 50 3/4
36
72 3,000 14 112526597 MTM367236-3K295 39 1/4 36 1/4 74 3/4
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 273
General Industrial Products
Features:
• These industrial work benches are noteworthy
for their superb construction, state-of-the-art
design, strength and reliability
• Made with an extra-heavy-duty durability,
the work benches offer an impressive weight
capacity of up to 14,000 pounds, making them
appropriate to rely on even on the heaviest
assemblies
• Includes a 1/4” steel plate work surface with 3” x 3” x 3/16” angle iron legs for added
strength and sturdiness
• A 29 1/2” deep shelf is situated 10” above the floor
Color: Gray
• Come with a durable gray powder-coat finish and are
Max. Load Capacity: 1,200 lb
shipped assembled, ready for immediate use
Depth Height Width • Shown with optional drawer 177-Drawer-95
Item No. Mfr. No. (in) (in) (in) Color: Gray
112525492 2211A-TH-LU-95 18 1/4 42 1/8 42 1/8 Capacity: 14,000 lb
Bench
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
Depth Height Length
Item No. Mfr. No. (in) (in) (in)
112526440 HWB-3648-95 36 34 48
112526442 HWB-3660-95 36 34 60
112526444 HWB-3672-95 36 34 72
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
Features:
• Finished in durable textured gray rust- and acid-resistant powder coat
• Shipped assembled, ready for use
• 1/4” steel plate welded to 3” channel frame
• 3” “C” channel frame
• 29 1/2” deep shelf sits 10” above floor
• 3” x 3” x 3/16” angle iron legs
Color: Gray
Capacity: 12,000 lb
Bench
Top
Depth Height Length Thickness
Item No. Mfr. No. (in) (in) (in) (in)
112526389 HDWB-3048-95 30 34 48 3/16
112526391 HDWB-3660-95 36 34 60 3/16 Search Products
112526393 HDWB-3672-95 36 34 72 3/16
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
274 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
Storage Cabinet
No. of
Width Depth Height No. of Bins
(in) (in) (in) Shelves Included Door Type Item No. Mfr. No.
42 2 – Standard 112528526 3700-2S-95
60 3 – Standard 112528527 3701-3S-95
– 132 Deep Doors 112504160 DC-BDLP-132-95
16 – Deep Doors 112528594 DC36-4S12DS-95
36 24
72 3 102 Flush 112528453 3501-BDLP-102-3S-95
4 96 Deep Doors 112485337 DC-DLP-96-4S-95
8 64 Deep Doors 112528597 DC36-642S6DS-95
78 4 – Standard 112528532 3702-4S-95
18 – Deep Doors 112528607 DC48-4S14DS-95
72 128 Deep Doors 112528601 DC48-128-4S-95
4
48 24 176 Deep Doors 112528604 DC48-176-95
78 3 137 Flush 112506667 JC-137-3S-95
84 18 – Deep Doors 112528845 SJC-DLP-4S-14DS-95
60 24 84 – 227 Flush 112528852 SSC-227-95
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov.
Full line of Durham cabinets and accessories are available. Contact your local Applied® service center for more details.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 275
General Industrial Products
Thread Repair Kit for Metal - Thin Wall Coil Thread Repair Kit
E-Z LOK and E-Z Coil thread repair kits provide an easy-to-use solution for creating E-Z LOK and E-Z Coil thread repair kits provide an easy-to-use solution for creating
strong threads in soft metals, like aluminum, magnesium and cast iron. strong threads in soft metals, like aluminum, magnesium and cast iron.
Includes 20 single size thin wall inserts, plus a drill, tap and installation tool. These Coil Thread Repair Kit includes everything you need to repair stripped threads in
thread insert kits provide everything required to repair damaged threads. Carbon metal: inserts, drill, STI tap, install tool tang break.
steel construction. Designed for use in metal.
Features: Features:
• Solid wall and coil designs • Solid wall and coil designs
• Kits include everything needed for installation • Kits include everything needed for installation
• Inserts, drill, tap and installation tool • Inserts, drill, tap and installation tool
• Unified and metric threads • Unified and metric threads
• Carbon steel and stainless steel designs • Carbon steel and stainless steel designs
Includes: Includes:
• Drill • Installation Tool Tang Break
• Installation Tool • STI Tap
• Tap • Drill
No. of Inserts: 10
Thread Thread
Item No. Mfr. No. Size Item No. Mfr. No. Size No. of Inserts
116174209 EZ-310-4 1/4-20 x 3/8-16 113991692 SK20815 1/4-20 x 1.5D 10
116174210 EZ-310-5 5/16-18 x 7/16-14 113996743 SK20915 5/16-18 x 1.5D 10
116174211 EZ-310-6 3/8-16 x 1/2-13 113996744 SK21015 3/8-16 x 1.5D 10
116174212 EZ-310-M6 M6-1 x 3/8-16 113996745 SK40615 M6-1.0 x 1.5D 10
116174223 EZ-310-M8 M8-1.25 x 7/16-14 113996746 SK40815 M8-1.25 x 1.5D 10
116174224 EZ-310-M10 M10-1.5 x 1/2-13 113996747 SK40915 M10-1.5 x 1.5D 10
WARNING: This product can expose you to lead, which is known to the State of California WARNING: This product can expose you to lead, which is known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information go to to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov. www.P65Warnings.ca.gov.
276 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
DURAHIDE™
M-PACT® DRIVER F9-360
IMPACT PROTECTION CUT RESISTANT
Molded Thermoplastic High-tensile strength
Rubber (TPR) absorbs liner provides 360°
blunt force impact EN 388: 2016
and meets EN 13594 Level F & ANSI A9
impact standard. cut resistance.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 277
General Industrial Products
Catch them
before they
hit the floor.
At Oil-Dri we call it proactive maintenance, and it has become the mindset for industrial
cleanup. Absorbent pads, rolls, and socks are lined in areas where spills are likely to occur...
before they cause a safety hazard. Now that’s forward thinking.
278 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
General Industrial Products
RDX SERIES RM SERIES BPR MAG ONE CP200D SL300 DLR SERIES DTR SERIES
DIGITAL RADIOS
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 279
General Industrial Products
A well-organized parts area for consumable items can save a company thousands of dollars a year
in the reduction of downtime and time spent chasing parts off-site while improving overall shop
productivity. There can be many challenges in trying to accomplish this on your own. At Applied
Maintenance Supplies & Solutions®, we understand and we’re here to help.
Distribution Centers:
Strongsville, OH
OH Fontana,
Fontana, CA
CA
GA Agawam,
Lithia Springs, GA Agawam, MAMA
280 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Bearings
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power 8
Transmission
Pneumatic 9
Products
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
Equipment
Index,
INDEX
IMPROVE
PRODUCTIVITY
Eliminate unnecessary
maintenance costs such
as scheduled route-based
contracts.
INCREASE UPTIME
Early warning system to avoid
unplanned downtime, for
example “water in oil” detection.
ENHANCE SAFETY
Allow personnel to see the
health of your equipment from
a distance rather than trying to
reach difficult locations.
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
21/22
Ball Bearings Plain Bearings
Angular Contact................................................ 284-286,302-305 Bars - Cored & Solid.........................................................402-405
Double Row............................................... 283-285,305,315-317 Bushings (Sleeve Bearings)..............................................331-338
Loose Balls..............................................................................309 Plates......................................................................................403
Self-Aligning...........................................................................283 Spherical Plain Bearings..........................................................384
Single Row Radial......................................284,286-304, 306-308 Thrust Washers...................................................336,338,382-383
Spindle.............................................................. 302-304,306-307 Roller Bearings
Wide Inner Ring.................................................289,308,339-340 Cylindrical........................................................................319-321
Cam Followers Double Row...................................................... 315-318,321-322
Stud Type.........................................................................375-378 Needle.............................................................................379-383
Yoke Rollers.....................................................................378-379 Self Aligning............................................... 315-318,322-325,330
Flange Units Shaker Screen....................................................315-318,322,330
Ball Bearing...................................................... 349-362,364-366 Spherical.................................................... 315-317,322-326,330
Corrosion-Resistant..............................350,352,355,357,365-366 Tapered.....................................................................309-314,319
Roller Bearing...........................................................369,373-375 Seals
Linear Motion O-Rings............................................................................394-395
Actuators................................................................................393 Shaft................................................................................396-401
Bearings, Linear........................................................384-386,392 V-Rings...................................................................................401
Bearings, Mounted...........................................................386-388 Wear Sleeves...........................................................................402
Bearings, Unmounted.............................................................383 Track Roller Systems
Guide Wheels...................................................................390-391 Guideways/Rails...............................................................390-392
Rails, Shafting & Accessories.....................................389-390,392
Self-Lubricated Linear.............................................................384
Pillow Blocks
Adapter Sleeves...............................................................327-329
Ball Bearing............338-342,344-349,361,363-364,366,386-388
Bearing Inserts..........................................................282,339-340
Corrosion-Resistant........ 341-342,346-348,361,363,366,371-372
End Caps.................................................................................367
Housings.................................................................................326
Locknuts & Lockwashers.........................................................329
Roller Bearing................ 282-283,326-327,343,348,361,367-374
Self-Lubricated Pillow Block Bearing.......................................388
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
282 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
2 1/4 2 3/4 8 5/16 to 8 11/16 10 1/2 1 5/8 3 1/2 5 23/32 101196194 E-P4B-TRB-2 1/4
2 7/16 2 3/4 8 5/16 to 8 11/16 10 1/2 1 5/8 3 1/2 5 23/32 101196195 E-P4B-TRB-2 7/16
2 1/2 2 3/4 8 5/16 to 8 11/16 10 1/2 1 5/8 3 1/2 5 23/32 101196193 E-P4B-TRB-2 1/2
2 11/16 3 1/8 9 3/16 to 9 13/16 12 1 7/8 4 6 1/4 101196196 E-P4B-TRB-2 11/16
2 3/4 3 1/8 9 3/16 to 9 13/16 12 1 7/8 4 6 1/4 101196198 E-P4B-TRB-2 3/4
2 15/16 3 1/8 9 3/16 to 9 13/16 12 1 7/8 4 6 1/4 101196197 E-P4B-TRB-2 15/16
3 3 1/8 9 3/16 to 9 13/16 12 1 7/8 4 6 1/4 101196199 E-P4B-TRB-3
3 3/16 3 3/4 10 3/4 to 11 1/4 13 1/2 2 1/4 4 1/2 7 1/2 101196202 E-P4B-TRB-3 3/16
3 1/4 3 3/4 10 3/4 to 11 1/4 13 1/2 2 1/4 4 1/2 7 1/2 101196201 E-P4B-TRB-3 1/4
3 7/16 3 3/4 10 3/4 to 11 1/4 13 1/2 2 1/4 4 1/2 7 1/2 101196203 E-P4B-TRB-3 7/16
3 1/2 3 3/4 10 3/4 to 11 1/4 13 1/2 2 1/4 4 1/2 7 1/2 101196200 E-P4B-TRB-3 1/2
3 15/16 4 1/4 12 1/4 to 12 3/4 15 1/4 2 7/16 4 1/2 8 1/2 101196204 E-P4B-TRB-3 15/16
4 4 1/4 12 1/4 to 12 3/4 15 1/4 2 7/16 4 1/2 8 1/2 101196205 E-P4B-TRB-4
4 7/16 4 3/4 13 5/16 to 13 11/16 16 5/8 2 3/4 4 5/8 9 3/8 101196207 E-P4B-TRB-4 7/16
4 1/2 4 3/4 13 5/16 to 13 11/16 16 5/8 2 3/4 4 5/8 9 3/8 101196206 E-P4B-TRB-4 1/2
4 15/16 5 1/2 15 1/4 to 15 3/4 18 1/2 3 5 1/8 10 7/8 101196208 E-P4B-TRB-4 15/16
5 5 1/2 15 1/4 to 15 3/4 18 1/2 3 5 1/8 10 7/8 101196209 E-P4B-TRB-5
Features: Applications:
• Self-aligning • Fans
• Two rows of balls with a common, sphered raceway • Papermaking machines
• Permits angular misalignment of the shaft
No Snap Ring
Open Double Sealed
Static Dynamic Static Dynamic
Limiting Reference Load Load Limiting Reference Load Load
I.D. O.D. Width Speed Speed Rating Rating Width Speed Speed Rating Rating
(mm) (mm) Item No. Mfr. No. (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No. (mm) (rpm) (rpm) (lbf) (lbf)
15 35 100755885 1202 ETN9 11 28,000 45,000 396 1,670 100755890 2202 E-2RS1TN9 14 26,000 38,000 459 1,960
17 40 100755938 1203 ETN9 12 24,000 38,000 495 1,990 100755945 2203 E-2RS1TN9 16 24,000 34,000 573 2,380
20 47 100755992 1204 ETN9 14 20,000 32,000 764 2,860 100755996 2204 E-2RS1TN9 18 20,000 28,000 933 3,780
25 52 100756063 1205 ETN9 15 18,000 28,000 899 3,220 100756069 2205 E-2RS1TN9 18 18,000 26,000 989 3,780
30 62 100756157 1206 ETN9 16 15,000 24,000 1,050 3,510 100756164 2206 E-2RS1TN9 20 15,000 22,000 1,510 5,350
35 72 100756253 1207 ETN9 17 13,000 20,000 1,350 4,270 100756258 2207 E-2RS1TN9 23 12,000 18,000 1,980 6,900
40 80 100756355 1208 ETN9 18 11,000 18,000 1,560 4,470 100756360 2208 E-2RS1TN9 23 11,000 16,000 2,250 7,170
Don’t wait days or weeks for your linear needs – Applied® linear cutting shops and technicians
can help make sure you get what you need, FAST! Cut-to-length shafting, complete block and
rail assemblies and more!
Shop Services:
• Stock and ship random lengths of shafting
• Cut-to-length shafting
• Special machined shafting to customer guidelines
• Complete block and rail assemblies
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 283
Bearings
Light 5200 Series Double Row Ball Bearing
These bearings are available in both Conrad and maximum capacity types. Suffix K No Snap Ring
denotes Conrad-type, e.g., 5203K. Suffix W or no suffix denotes maximum capacity
Dynamic Static Open
type, e.g., 5212W.
Load Load
I.D. O.D. Width Rating Rating
(mm) (mm) (mm) (lbf) (lbf) Item No. Mfr. No.
Features: 10 30 14.3 2,400 1,140 100758947 5200K
• Same bores and O.D. as the corresponding 12 32 15.9 2,040 1,060 100758948 5201K
bearings in 200 series single-row radial type 15 35 15.9 3,050 1,600 100758965 5202K
• Double-row angular contact ball bearings meet 17 40 17.5 3,800 2,080 100758987 5203K
demand for increased axial and radial rigidity 20 47 20.6 5,100 2,850 100759015 5204K
in applications where design limits space 25 52 20.6 5,600 3,400 100759054 5205K
30 62 23.8 8,800 6,100 100759098 5206W
10,200 6,550 100759141 5207K
35 72 27.0
11,600 8,300 100759140 5207W
11,600 7,650 100759179 5208K
40 80 30.2
14,000 10,600 100759180 5208W
12,900 8,800 101019684 5209K
45 85 30.2
14,600 11,600 100759218 5209W
50 90 30.2 15,000 12,700 100759254 5210W
60 110 36.5 23,800 20,000 100759320 5212W
No Snap Ring
Limiting Limiting Limiting Dynamic Static Open Double Sealed Double Shielded
Speed Speed Speed Load Load
I.D. O.D. Width Grease Oil Sealed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
15 42 19.1 11,000 15,000 11,000 3,390 2,090 100760577 5302SB — — — —
17 47 22.2 11,000 14,000 11,000 4,860 2,860 102190779 5303SB — — 101169001 5303SBKFF
20 52 22.2 8,500 12,000 8,500 5,060 3,280 102143011 5304C 101169002 5304CZZ 100760588 5304CFF
25 62 25.4 7,500 10,000 7,500 6,910 4,590 100760601 5305C 100760603 5305CZZ 100760602 5305CFF
30 72 30.2 6,300 8,500 6,300 9,360 6,520 100760623 5306C 101169006 5306CZZ 101169004 5306CFF
35 80 34.9 5,600 7,500 5,600 11,100 7,760 100760643 5307C 100760644 5307CZZ 101169009 5307CFF
Features:
• Has filling notches on one side to permit assembling the maximum number of balls into the bearing
• Contact angles converge outside the bearing
• All inner and outer rings have closure grooves
• Bearings may be equipped with seals, shields, snap rings or any combination
• Has very heavy radial capacity
• Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
• One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced
between the inner and outer ring
• Used with heavy radial loads, two-directional thrust loads or a combination of both
No Snap Ring
Limiting Limiting Limiting Dynamic Static Open
Speed Speed Speed Load Load
I.D. O.D. Width Grease Oil Sealed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
30 72 30.2 6,300 8,500 6,300 10,500 9,670 100760624 5306M
35 80 34.9 5,600 7,500 5,600 11,800 10,800 100760647 5307M
40 90 36.5 5,000 6,700 5,000 15,100 14,700 100760664 5308M
45 100 39.7 4,500 6,000 4,500 18,200 18,000 100760687 5309M
50 110 44.5 4,000 5,300 4,000 21,400 21,400 100760698 5310M
284 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Fafnir® Medium 5300 Series Double Row Ball Bearing
Medium 5300 series ball bearings are available in both Conrad and maximum capacity types. Suffix K denotes Conrad-type, e.g., 5303K. Suffix W or no suffix denotes maximum
capacity type, e.g., 5310W.
Features:
• Same bores and O.D. as the corresponding bearings in the 300 series, single-row radial type
• Double-row angular contact ball bearings meet demand for increased axial and radial rigidity in applications where design limits space
No Snap Ring
Dynamic Static Open
Load Load
I.D. O.D. Width Rating Rating
(mm) (mm) (mm) (lbf) (lbf) Item No. Mfr. No.
15 42 19.1 3,800 2,080 100758968 5302K
17 47 22.2 5,100 2,850 100758994 5303K
20 52 22.2 6,400 3,450 100759029 5304K
25 62 25.4 8,500 4,750 100759068 5305K
30 72 30.2 14,000 9,300 101019696 5306W
35 80 34.9 15,600 10,800 100759157 5307W
40 90 36.5 20,400 15,000 100759197 5308W
45 100 39.7 24,000 18,300 100759234 5309W
50 110 44.5 28,500 22,000 100759271 5310W
Applications:
• General industrial
• Automotive
• Agricultural
• Chemical
• Utilities
No Snap Ring
Dynamic Static Double Sealed
Load Load
I.D. O.D. Width Rating Rating
(mm) (mm) (mm) (lbf) (lbf) Item No. Mfr. No.
15 35 15.9 1,930 780 100758964 W202PP
17 40 17.5 2,360 1,000 100758986 W203PP
20 47 20.6 3,200 1,400 100759014 W204PP
25 52 20.6 3,450 1,560 100759053 W205PP
30 62 23.8 4,800 2,280 100759096 W206PP
35 72 27.0 6,400 3,050 100759139 W207PP
40 80 30.2 8,150 4,000 100759177 W208PP
45 85 30.2 8,150 4,000 100759217 W209PP
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 285
Bearings
Features: Applications:
• Deep, uninterrupted raceway • Textiles
• Carries axial loads in both directions • Power tools
• Carries radial loads at high speeds • Electric motors
• Pumps
• Gearboxes
No Snap Ring
Dynamic Static Open Double Sealed Double Shielded
Reference Load Load
I.D. O.D. Width Speed Rating Rating
(mm) (mm) (mm) (rpm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
7 19 6 85,000 387 139 100755755 607 101171385 607-2RSH/LHT23 101559955 607-2Z/C3LHT23
8 22 7 75,000 731 308 101544720 608 JEM 101528276 608 2RSJEM 101526728 608 2ZJEM
9 24 7 70,000 834 373 100755773 609 101175060 609-2RSH/C3LHT23 101558410 609-2Z/LHT23
10 26 8 67,000 1,040 441 101527241 6000 JEM 101523839 6000 2RSJEM 110050182 6000 2ZJEM
12 28 8 60,000 1,140 531 101537784 6001 JEM 101525216 6001 2RSJEM 110050174 6001 2ZJEM
15 32 9 50,000 1,260 641 101524049 6002 JEM 101546977 6002 2RSJEM 110050172 6002 2ZJEM
17 35 10 45,000 1,360 731 101524052 6003 JEM 101526248 6003 2RSJEM 110050191 6003 2ZJEM
20 42 12 38,000 2,100 1,120 101546979 6004 JEM 101527243 6004 2RSJEM 101526628 6004 2ZJEM
25 47 12 32,000 2,520 1,470 101526249 6005 JEM 101530734 6005 2RSJEM 101526629 6005 2ZJEM
30 55 13 28,000 2,990 1,870 101527244 6006 JEM 101530540 6006 2RSJEM 101553134 6006 2ZJEM
35 62 14 24,000 3,570 2,290 101530736 6007 JEM 101546982 6007 2RSJEM 101528939 6007 2ZJEM
40 68 15 22,000 3,780 2,610 101528314 6008 JEM 101529646 6008 2RSJEM 110050180 6008 2ZJEM
45 75 16 20,000 4,680 3,280 101523843 6009 JEM 101482019 6009 2RSJEM 101562078 6009 2ZJEM
50 80 16 18,000 4,860 3,600 101523844 6010 JEM 101528315 6010 2RSJEM 101559971 6010 2ZJEM
55 90 18 16,000 6,320 4,770 101530543 6011 JEM 101526630 6011 2RSJEM 101525220 6011 2ZJEM
60 95 18 15,000 6,650 5,220 101484914 6012 JEM 101518620 6012 2RSJEM 101472595 6012 2ZJEM
65 100 18 14,000 6,900 5,620 101529436 6013 JEM 101530545 6013 2RSJEM 101528944 6013 2ZJEM
70 110 20 13,000 8,480 6,970 101483589 6014 JEM 101557997 6014 2RSJEM 101557940 6014 2ZJEM
75 115 20 12,000 8,930 7,530 101559973 6015 JEM 101544026 6015 2RSJEM 101525222 6015 2ZJEM
80 125 22 11,000 10,700 8,990 101546714 6016 JEM 101544722 6016 2RSJEM 101516723 6016 2ZJEM
85 130 22 11,000 11,100 9,670 101525223 6017 JEM 101482113 6017 2RSJEM 110050178 6017 2ZJEM
90 140 24 10,000 13,200 11,200 101530740 6018 JEM 101171360 6018-2RS1/C3 101596209 6018 2ZJEM
100 150 24 9,500 13,600 12,100 100757150 6020/C3 101169180 6020-2RS1 100757152 6020-2Z
120 180 28 7,500 19,200 18,000 100757234 6024 101173904 6024-2RS1 100757236 6024-2Z
286 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Fafnir® 9100K Extra-Light Series Ball Bearing
The 9100K series bearings are designed principally for applications Applications:
where housing diameters are restricted and it is desirable to maintain • General industrial
relatively large shaft diameters. • Automotive
• Agricultural
• Chemical
• Utilities
Features: Applications:
• Deep, uninterrupted raceway • Textiles
• Carries axial loads in both directions • Power tools
• Carries radial loads at high speeds • Electric motors
• Pumps
• Gearboxes
Open w/o Snap Ring Double Sealed w/o Snap Ring Double Shielded w/o Snap Ring Double Sealed w/ Snap Ring
No Snap Ring
Static Open Double Sealed Double Shielded
Limiting Reference Dynamic Load
I.D. O.D. Width Speed Speed Load Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
5 16 5 60,000 95,000 250 85.4 100755742 625 100755745 625-2RS1 101171718 625-2Z/C3LHT23
6 19 6 50,000 80,000 387 139 100755749 626 101544597 626 2RSJEM 110050175 626 2ZJEM
7 22 7 45,000 70,000 731 308 100755759 627 101517337 627 2RSJEM 110050186 627 2ZJEM
9 26 8 38,000 60,000 1,040 441 — — 101551227 629 2RSJEM 101526208 629 2ZJEM
10 30 9 34,000 56,000 1,140 531 101524059 6200 JEM 101525227 6200 2RSJEM 101530741 6200 2ZJEM
12 32 10 32,000 50,000 1,550 697 101523846 6201 JEM 101526253 6201 2RSJEM 110050164 6201 2ZJEM
15 35 11 28,000 43,000 1,750 843 101528947 6202 JEM 101553139 6202 2RSJEM 101530547 6202 2ZJEM
17 40 12 24,000 38,000 2,150 1,070 101171534 6203 JEM 101526634 6203 2RSJEM 101525229 6203 2ZJEM
20 47 14 20,000 32,000 2,860 1,470 101553498 6204 JEM 101527245 6204 2RSJEM 110050183 6204 2ZJEM
25 52 15 18,000 28,000 3,150 1,750 101537789 6205 JEM 101527246 6205 2RSJEM 101529443 6205 2ZJEM
30 62 16 15,000 24,000 4,380 2,520 101525234 6206 JEM 101523851 6206 2RSJEM 101527250 6206 2ZJEM
35 72 17 13,000 20,000 5,730 3,440 101171588 6207 JEM 101526257 6207 2RSJEM 101526639 6207 2ZJEM
40 80 18 11,000 18,000 6,900 4,270 101526640 6208JEM 101553143 6208 2RSJEM 101553144 6208 2ZJEM
45 85 19 11,000 17,000 7,460 4,860 101546991 6209 JEM 101468510 6209 2RSJEM 101469935 6209 2ZJEM
50 90 20 10,000 15,000 7,890 5,220 101482864 6210 JEM 101481669 6210 2RSJEM 101468516 6210 2ZJEM
55 100 21 9,000 14,000 9,800 6,520 101468517 6211 JEM 101468161 6211 2RSJEM 101482866 6211 2ZJEM
60 110 22 8,000 13,000 10,700 7,310 101171636 6212 JEM 101468577 6212 2RSJEM 101468791 6212 2ZJEM
65 120 23 7,500 12,000 12,600 9,110 101470527 6213 JEM 101468521 6213 2RSJEM 101482867 6213 2ZJEM
70 125 24 7,000 11,000 13,600 10,100 101471199 6214 JEM 101481732 6214 2RSJEM 101481600 6214 2ZJEM
75 130 25 6,700 10,000 14,900 11,000 101471200 6215 JEM 101481675 6215 2RSJEM 101482545 6215 2ZJEM
80 140 26 6,000 9,500 15,800 12,400 101468163 6216 JEM 101544699 6216 2RSJEM 101470530 6216 2ZJEM
85 150 28 5,600 9,000 18,700 14,400 101515726 6217 JEM 101171671 6217 2RSJEM 101483144 6217 2ZJEM
90 160 30 5,300 8,500 21,500 16,500 101469945 6218 JEM 100757095 6218-2RS1/C3 110050199 6218 2ZJEM
95 170 32 5,000 8,000 24,300 18,300 101482062 6219 JEM 101169196 6219-2RS1/C3 110050161 6219 2ZJEM
100 180 34 4,800 7,500 27,900 20,900 101470534 6220 JEM 101582030 6220 2RSJEM 110050163 6220 2ZJEM
110 200 38 4,500 6,700 32,200 26,500 101482549 6222 JEM — — 101175191 6222 2ZJEM
120 215 40 4,000 6,300 32,800 26,500 101482873 6224 JEM — — — —
Continued on next page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 287
Bearings
Continued from previous page.
288 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Light 6200 Series Deep Groove Ball Bearing
Features: Applications:
• Conrad-type ball bearing • Textiles
• Deep, uninterrupted raceway • Power tools
• Carries axial loads in both directions • Electric motors
• Carries radial loads at high speeds • Pumps
• Complies with RoHS restrictions on the use of certain • Gearboxes
hazardous substances in electrical and electronic equipment
No Snap Ring
Limiting Limiting Limiting Dynamic Static Open Double Sealed Double Shielded
Speed Speed Speed Load Load
I.D. O.D. Width Grease Oil Sealed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
10 30 9 24,000 30,000 17,000 1,140 531 100759509 6200-C-C3 101474612 6200-C-2HRS-C3-L38 100759513 6200-C-2Z-L038-C3
12 32 10 22,000 28,000 15,000 1,550 697 110594644 6201-C-C3 101469899 6201-2RSR-L038-C3 101446900 6201-2Z-L038-C3
19,000 24,000 13,000 8,200 3,750 — — 101480506 6202-2RSR-L038-C3 101382253 6202-2Z-L038-C3
15 35 11
30,000 24,000 13,000 8,200 3,750 110594650 6202-C-C3 — — — —
17 40 12 17,000 20,000 12,000 2,150 1,070 100759609 6203-C3 101400950 6203-2RSR-L038-C3 101407840 6203-2Z-L038-C3
9,500 18,000 10,000 13,600 6,600 — — 101467666 6204-2RSR-L038-C3 — —
20 47 14 15,000 18,000 10,000 13,600 6,600 100759655 6204-C3 — — — —
18,700 18,000 10,000 13,600 6,600 — — — — 105507243 6204-2Z-L038-C3
25 52 15 12,000 15,000 8,500 3,150 1,750 100759700 6205.C3 101407727 6205-2RSR-L038-C3 100759704 6205-2Z-L038-C3
30 62 16 10,000 13,000 7,500 4,380 2,520 100759756 6206-C3 101381587 6206-2RSR-L038-C3 100759760 6206-2Z-L038-C3
35 72 17 9,000 11,000 6,300 5,730 3,440 — — 101474613 6207-2RSR-L038-C3 100759814 6207-2Z-L038-C3
40 80 18 8,500 10,000 5,600 6,900 4,270 100759872 6208-C3 101469314 6208-2RSR-L038-C3 100759876 6208-2Z-L038-C3
45 85 19 7,500 9,000 5,000 7,460 4,860 100759929 6209-C3 101480505 6209-2RSR-L038-C3 — —
50 90 20 7,000 8,500 4,800 7,890 5,220 100759989 6210-C3 101447533 6210-2RSR-L038-C3 101447532 6210-2Z-L038-C3
55 100 21 6,300 7,500 4,300 9,800 6,520 100760047 6211-C3 101480000 6211-2RSR-L038-C3 101421097 6211-2Z-L038-C3
60 110 22 6,000 7,000 4,000 10,700 7,310 100760096 6212-C3 101407473 6212-2RSR-L038-C3 101401141 6212-2Z-L038-C3
65 120 23 5,300 6,300 3,600 12,600 9,110 100760145 6213-C3 100760153 6213-2RSR-C3 100760149 6213-2Z-C3
70 125 24 5,000 6,000 3,400 13,600 10,100 100760194 6214-C3 100760201 6214-2RSR-C3 100760198 6214-2Z-C3
75 130 25 4,800 5,600 3,200 14,900 11,000 100760237 6215-C3 100760244 6215-2RSR-C3 100760241 6215-2Z-C3
80 140 26 4,500 5,300 3,000 15,800 12,400 100760278 6216-C3 100760286 6216-2RSR-C3 100760283 6216-2Z-C3
85 150 28 4,300 5,000 2,800 18,700 14,400 100760321 6217-C3 100760327 6217-2RSR-C3 100760325 6217-2Z-C3
90 160 30 3,800 4,500 2,600 21,500 16,500 100760353 6218-C3 100760360 6218-2RSR-C3 100760358 6218-2Z-C3
95 170 32 3,600 4,300 2,400 24,300 18,300 100760389 6219-C3 100760393 6219-2RSR-C3 100760392 6219-2Z-C3
100 180 34 3,400 4,000 2,400 27,900 20,900 100760414 6220-C3 100760421 6220-2RSR-C3 100760418 6220-2Z-C3
3,000 3,600 2,000 32,200 26,500 100760455 6222-C3 — — — —
110 200 38
3,800 3,600 2,000 32,200 26,500 — — — — 100760460 6222-2Z-C3
120 215 40 2,800 3,400 1,900 32,800 26,500 100760479 6224-C3 — — — —
The 200 series extra width, inner ring-type bearing provides greater shaft support.
The “L” seal employs a frictionless metallic member to form a labyrinth. These
bearings are used extensively in high speed pneumatic tools, small pumps, electric
motors, domestic appliances, etc. These bearings are electric motor quality for
applications where extra quietness is a requirement.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 289
Bearings
HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing
Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate
contamination is present in the operation.
Features: Applications:
• Complies with RoHS restrictions on the use of certain hazardous substances • Transmissions • Elevators
in electrical and electronic equipment • Electric motors and generators • Conveying equipment
• For deep groove ball bearings, if the bearing load is too small during • Electrical appliances • Hoists and cranes
operation, slippage occurs between the balls and raceways, which may result • Pumps and compressors • Power hand tools
in smearing • Blowers and fans • Industrial valves
• The higher the weight of balls and cage, the higher this tendency becomes, • Speed changers • Rolling mill machinery
especially for large bearings • Gearboxes and drives • Textile machinery
• If very small bearing loads are expected, please contact Applied® for • Woodworking machinery • Paper machinery
selection of an appropriate bearing • Lawn and garden equipment • Printing machinery
• Turbines • Food products machinery
• Farm machinery • Packaging machinery
• Construction machinery • Industrial clutches
• Oil field machinery • Slip joints
No Snap Ring
Limiting Dynamic Static
Speed Load Load Radial
I.D. O.D. Width Grease Rating Rating Internal
(mm) (mm) (mm) (rpm) (lbf) (lbf) Enclosure Clearance Seal Material Item No. Mfr. No.
18,000 1,150 537 Double Sealed C3 Buna-N 100760831 6200DDUC3
Normal None 100760827 6200
10 30 9 Open
24,000 1,150 537 C3 None 101098005 6200C3
Double Shielded C3 Metal 100760829 6200ZZC3
17,000 1,530 686 Double Sealed C3 Buna-N 100760851 6201DDUC3
12 32 10 Open C3 None 101103100 6201C3
22,000 1,530 686
Double Shielded C3 Metal 100760849 6201ZZC3
17,000 1,530 686 Double Sealed C3 Buna-N 101519935 6201-08DDUC3
12.7 32 10
22,000 1,530 686 Open C3 None 101517974 6201-08C3
17,000 1,530 686 Double Sealed C3 Buna-N 101518881 6201-13MDDUC3
13 32 10 Open Normal None 101518548 6201-13M
22,000 1,530 686
Double Shielded C3 Metal 101104140 6201-13MZZC3
14,000 1,720 843 Double Sealed C3 Buna-N 100760884 6202DDUC3
Normal None 100760878 6202
15 35 11 Open
20,000 1,720 839 C3 None 100760879 6202C3
Double Shielded C3 Metal 100760882 6202ZZC3
Open Normal None 101518547 6202-10
15.87 35 11 20,000 1,720 839
Double Shielded C3 Metal 101385633 6202-10ZZC3
12,000 2,147 1,080 Double Sealed C3 Buna-N 100991762 6203-625DDUC3
15.9 40 12 Open Normal None 101418735 6203-625
17,000 2,147 1,080
Double Shielded C3 Metal 101098033 6203-625ZZC3
12,000 2,147 1,080 Double Sealed C3 Buna-N 100760916 6203DDUC3
Normal None 100760910 6203
17 40 12 Open
17,000 2,147 1,080 C3 None 100760911 6203C3
Double Shielded C3 Metal 100760914 6203ZZC3
11,000 2,878 1,480 Double Sealed C3 Buna-N 100760954 6204DDUC3
Normal None 100760948 6204
20 47 14 Open
15,000 2,878 1,480 C3 None 100760949 6204C3
Double Shielded C3 Metal 100760952 6204ZZC3
9,000 3,147 1,770 Double Sealed C3 Buna-N 100761007 6205DDUC3
Normal None 100761001 6205
25 52 15 Open
13,000 3,147 1,770 C3 None 100761002 6205C3
Double Shielded C3 Metal 100761005 6205ZZC3
7,500 4,384 2,540 Double Sealed C3 Buna-N 100761066 6206DDUC3
Open Normal None 100761061 6206
30 62 16 11,000 4,384 2,540
Double Shielded C3 Metal 100761064 6206ZZC3
11,500 4,384 2,540 Open C3 None 101098048 6206C3
6,300 5,778 3,440 Double Sealed C3 Buna-N 100761138 6207DDUC3
Normal None 100761131 6207
35 72 17 Open
9,500 5,778 3,440 C3 None 100761132 6207C3
Double Shielded C3 Metal 100761135 6207ZZC3
Normal None 100761200 6208
Open
C3 None 100761201 6208C3
40 80 18 8,500 6,550 4,010
Double Sealed C3 Buna-N 100761206 6208DDUC3
Double Shielded C3 Metal 100761204 6208ZZC3
5,300 7,081 4,586 Double Sealed C3 Buna-N 100761270 6209DDUC3
Normal None 100761264 6209
45 85 19 Open
7,500 7,436 4,580 C3 None 100761265 6209C3
Double Shielded C3 Metal 100761268 6209ZZC3
Limiting speeds are lower with contact seals. For more information, contact your local Applied® service center.
Continued on next page.
290 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing
No Snap Ring
Limiting Dynamic Static
Speed Load Load Radial
I.D. O.D. Width Grease Rating Rating Internal
(mm) (mm) (mm) (rpm) (lbf) (lbf) Enclosure Clearance Seal Material Item No. Mfr. No.
4,800 7,868 5,216 Double Sealed C3 Buna-N 100761328 6210DDUC3
Normal None 100761322 6210
50 90 20 Open
7,100 8,262 5,220 C3 None 100761323 6210C3
Double Shielded C3 Metal 100761326 6210ZZC3
4,300 9,779 6,587 Double Sealed C3 Buna-N 100761392 6211DDUC3
Normal None 100761386 6211
55 100 21 Open
6,300 10,268 6,580 C3 None 100761387 6211C3
Double Shielded C3 Metal 100761390 6211ZZC3
3,800 11,802 8,093 Double Sealed C3 Buna-N 100761447 6212DDUC3
Normal None 100761441 6212
60 110 22 Open
5,600 12,393 8,130 C3 None 100761442 6212C3
Double Shielded C3 Metal 100761445 6212ZZC3
3,600 12,814 8,992 Double Sealed C3 Buna-N 100761500 6213DDUC3
12,814 8,992 Open C3 None 100761494 6213C3
65 120 23
5,300 Open Normal None 100761493 6213
13,573 9,010
Double Shielded C3 Metal 100761497 6213ZZC3
3,400 13,938 9,892 Double Sealed C3 Buna-N 100761551 6214DDUC3
Normal None 100761545 6214
70 125 24 Open
5,000 14,635 9,910 C3 None 100761546 6214C3
Double Shielded C3 Metal 100761549 6214ZZC3
3,200 14,837 11,128 Double Sealed C3 Buna-N 100761583 6215DDUC3
Normal None 100761577 6215
75 130 25 Open
4,800 15,579 11,100 C3 None 100761578 6215C3
Double Shielded C3 Metal 100761581 6215ZZC3
3,000 16,299 11,915 Double Sealed C3 Buna-N 100761614 6216DDUC3
Normal None 100761608 6216
80 140 26 Open
4,500 17,114 11,900 C3 None 100761609 6216C3
Double Shielded C3 Metal 100761612 6216ZZC3
3,800 18,884 13,938 Double Sealed C3 Buna-N 100761641 6217DDUC3
Normal None 100761636 6217
85 150 28 Open
4,300 19,828 13,900 C3 None 100761637 6217C3
Double Shielded C3 Metal 101098101 6217ZZC3
2,600 21,582 16,074 Double Sealed C3 Buna-N 100761654 6218DDUC3
Normal None 100761659 6218
90 160 30 Open
4,000 22,661 16,100 C3 None 100761660 6218C3
Double Shielded C3 Metal 100761663 6218ZZC3
2,600 24,504 18,434 Double Sealed C3 Buna-N 100761685 6219DDUC3
Normal None 100761679 6219
95 170 32 Open
3,800 25,729 18,400 C3 None 100761680 6219C3
Double Shielded C3 Metal 100761683 6219ZZC3
2,400 27,427 20,907 Double Sealed C3 Buna-N 100761709 6220DDUC3
Normal None 100761703 6220
100 180 34 Open
3,600 28,798 20,900 C3 None 100761704 6220C3
Double Shielded C3 Metal 100761707 6220ZZC3
Limiting speeds are lower with contact seals. For more information, contact your local Applied® service center.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 291
Bearings
Features:
• Dynamic seal design
• Inhibits the ingress of contaminants and moisture
• Reduces drag, frictional torque and operating temperature
I.D. O.D. Width Limiting Speed Grease Dynamic Load Rating Static Load Rating Double Sealed
(mm) (mm) (mm) (rpm) (lbf) (lbf) Item No. Mfr. No.
12 32 10 20,000 1,911 686 102114480 62012RDC3
15 35 11 18,000 2,147 843 102091397 62022RDC3
40 12 15,000 2,698 1,079 102112818 62032RDC3
17
47 14 14,000 3,822 1,495 103794543 63032RDC3
47 14 14,000 3,597 1,495 102092059 62042RDC3
20
52 15 13,000 4,474 1,762 103822424 63042RDC3
52 15 12,000 3,934 1,765 102092794 62052RDC3
25
62 17 9,900 5,777 2,540 102092510 63052RDC3
62 16 9,900 5,463 2,540 102092658 62062RDC3
30
72 19 8,600 7,486 3,372 102113129 63062RDC3
72 17 8,300 7,216 3,462 102092351 62072RDC3
35
80 21 7,700 9,374 4,339 102114277 63072RDC3
80 18 7,500 8,183 4,001 105429678 62082RDC3
40
90 23 6,900 11,442 5,395 102112829 63082RDC3
85 19 6,900 9,194 4,563 102091401 62092RDC3
45
100 25 6,100 13,735 6,632 102092511 63092RDC3
90 20 6,400 9,869 5,238 102134805 62102RDC3
50
110 27 5,500 17,422 8,610 112018560 63102RDC3
100 21 5,700 12,184 6,609 102092355 62112RDC3
55
120 29 5,000 20,120 10,116 102092968 63112RDTC3
110 22 5,100 14,747 8,138 102092064 62122RDC3
60
130 31 4,700 22,930 11,735 110715858 63122RDTC3
120 23 4,900 16,073 9,014 102115549 62132RDTC3
65
140 33 4,300 26,077 13,466 102115192 63132RDTC3
125 24 4,600 17,489 9,914 111455990 62142RDTC3
70
150 35 4,100 29,244 15,331 102135379 63142RDTC3
130 25 4,300 18,951 10,858 102116219 62152RDTC3
75
160 37 3,800 31,922 17,355 103037530 63152RDTC3
140 26 4,100 20,434 11,914 102115435 62162RDTC3
80
170 39 3,500 34,619 19,490 102114330 63162RDTC3
85 150 28 3,800 23,604 13,915 102115977 62172RDTC3
90 160 30 3,500 26,976 16,073 103039455 62182RDTC3
Geared for applications with high power density requirements or when operating in harsh environments, Koyo’s RSH2 ball bearings provide increased
capacities and longer life.
Features:
• RSH2 ball bearings allow for increased loading without the need for a larger bearing
• As a drop-in replacement to standard bearings, RSH2 provides longer uptime without the expense of modifying the application shaft and housing
• Due to the larger rolling elements, Koyo’s RSH2 ball bearings are not available with seals/shields
• With no filling slot, RSH2 is a great alternative to max-type bearings
• Max-type bearings with filling slots require knowledge of the application thrust load direction and proper orientation during installation, otherwise damage
and/or noise may occur when the balls to ride over the filling slot
• RSH2 bearings avoid this issue by eliminating the filling slot, enabling assembly in either orientation Cage Type: Pressed Steel
292 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Medium 6300 Series Deep Groove
Ball Bearing
Features: Applications:
• Deep, uninterrupted raceway • Textiles
• Carries axial loads in both directions • Power tools
• Carries radial loads at high speeds • Electric motors
• Pumps
No Snap Ring • Gearboxes Open Double Sealed Double Shielded
Dynamic Static Open Double Sealed Double Shielded
Limiting Reference Load Load
I.D. O.D. Width Speed Speed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
10 35 11 32,000 50,000 1,810 764 101470536 6300 JEM 101483150 6300 2RSJEM 110050177 6300 2ZJEM
12 37 12 28,000 45,000 2,190 933 101482550 6301 JEM 101515728 6301 2RSJEM 110050201 6301 2ZJEM
15 42 13 24,000 38,000 2,560 1,210 101481957 6302JEM 101482551 6302 2RSJEM 110050167 6302 2ZJEM
17 47 14 22,000 34,000 3,040 1,470 101469948 6303 JEM 101468528 6303 2RSJEM 110050162 6303 2ZJEM
20 52 15 19,000 30,000 3,570 1,750 101482875 6304 JEM 101484066 6304 2RSJEM 110050179 6304 2ZJEM
25 62 17 16,000 24,000 5,060 2,610 101484068 6305 JEM 101482555 6305 2RSJEM 110050181 6305 2ZJEM
30 72 19 13,000 20,000 6,320 3,600 101468531 6306 JEM 101483114 6306 2RSJEM 101481684 6306 2ZJEM
35 80 21 12,000 19,000 7,460 4,270 101481686 6307 JEM 101482073 6307 2RSJEM 101468535 6307 2ZJEM
40 90 23 11,000 17,000 9,220 5,400 101171798 6308 JEM 101481747 6308 2RSJEM 101470543 6308 2ZJEM
45 100 25 9,500 15,000 11,900 7,080 101468537 6309 JEM 101481965 6309 2RSJEM 101481750 6309 2ZJEM
50 110 27 8,500 13,000 13,900 8,540 101482563 6310 JEM 101484075 6310 2RSJEM 101481751 6310 2ZJEM
55 120 29 8,000 12,000 16,100 10,100 101482719 6311 JEM 101481692 6311 2RSJEM 101482241 6311 2ZJEM
60 130 31 7,000 11,000 18,400 11,700 101482971 6312 JEM 101484079 6312 2RSJEM 101483123 6312 2ZJEM
65 140 33 6,700 10,000 20,800 13,500 101482564 6313 JEM 101596190 6313 2RSJEM 101468597 6313 2ZJEM
70 150 35 6,300 9,500 23,400 15,300 101468538 6314 JEM 101483611 6314 2RSJEM 101468539 6314 2ZJEM
75 160 37 5,600 9,000 25,600 17,200 101515749 6315 JEM 101572450 6315 2RSJEM 110050184 6315 2ZJEM
80 170 39 5,300 8,500 27,900 19,500 101175258 6316 JEM 101523825 6316 2RSJEM 101515750 6316 2ZJEM
85 180 41 5,000 8,000 29,900 21,700 101481754 6317 JEM 101559952 6317 2RSJEM 100757064 6317-2ZJEM
90 190 43 4,800 7,500 32,200 24,300 101470548 6318 JEM 101551252 6318 2RSJEM 101481697 6318 2ZJEM
95 200 45 4,500 7,000 34,400 26,500 101482245 6319 JEM — — 101523822 6319 2ZJEM
100 215 47 4,300 6,700 39,100 31,500 101482158 6320 JEM — — 110050185 6320 2ZJEM
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 293
Bearings
Continued from previous page.
No Snap Ring
Dynamic Static Open Double Sealed Double Shielded
Load Load
I.D. O.D. Width Rating Rating
(mm) (mm) (mm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
55 120 29 18,300 10,000 101019309 311K 100759296 311NPP 100759294 311KDD
60 130 31 20,800 11,600 100759321 312K 100759325 312NPP 100759324 312KDD
65 140 33 23,600 13,400 100759344 313K — — 100759346 313KDD
70 150 35 26,000 15,300 100759367 314K 102038264 314PP 100759368 314KDD
75 160 37 29,000 17,300 100759387 315K — — 100759388 315KDD
80 170 39 31,500 19,300 100759403 316K — — 100759405 316KDD
85 180 41 34,000 21,600 100759421 317K — — 100759422 317KDD
Features:
• Metric series
• Conrad-type ball bearing
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
No Snap Ring
Dynamic Static Open Double Sealed Double Shielded
Load Load
I.D. O.D. Width Rating Rating
(mm) (mm) (mm) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
10 35 11 1,830 780 100759521 6300-B-C3-SNZ1 101484111 6300B2DRL278C3SNZ1 100759525 6300B2ZL278C3SNZ1
12 37 12 2,200 950 100759557 6301-C3 101447538 6301-2RSR-L038-C3 101469904 6301-2Z-L038-C3
15 42 13 2,550 1,200 100759588 6302-C3 101417783 6302-2RSR-L038-C3 101418316 6302-2Z-L038-C3
17 47 14 3,050 1,460 100759629 6303-C3 100759636 6303-2RSR-L038-C3 101446230 6303-2Z-L038-C3
20 52 15 3,600 1,760 100759673 6304-C3 100759681 6304-2RSR-L038-C3 101436382 6304-2Z-L038-C3
25 62 17 5,000 2,600 100759722 6305-C3 101394469 6305-2RSR-L038-C3 101417552 6305-2Z-L038-C3
30 72 19 6,550 3,650 100759777 6306-C3 101468727 6306-2RSR-L038-C3 101480004 6306-2Z-L038-C3
35 80 21 7,500 4,300 105455140 6307-C3 105670543 6307-2RSR-L038-C3 101468452 6307-2Z-L038-C3
40 90 23 9,650 5,600 100759894 6308-C-C3 101468507 6308-2RSR-L038-C3 101417784 6308-2Z-L038-C3
45 100 25 12,000 7,100 100759951 6309-C3 105508705 6309-2RSR-L038-C3 101379457 6309-2Z-L038-C3
50 110 27 14,000 8,500 100760012 6310-C3 101467670 6310-2RSR-L038-C3 101467669 6310-2Z-L038-C3
55 120 29 17,000 10,600 100760063 6311-C3 100760071 6311-2RSR-C3 100760069 6311-2Z-C3
60 130 31 18,300 11,600 100760112 6312-C3 100760121 6312-2RSR-C3 100760117 6312-2Z-C3
65 140 33 13,400 9,300 100760164 6313-C3 100760172 6313-2RSR-C3 100760168 6313-2Z-C3
70 150 35 23,600 15,300 100760209 6314-C3 101480176 6314-2RSR-C3 100760214 6314-2Z-C3
75 160 37 25,500 17,300 100760253 6315-C3 100760260 6315-2RSR-C3 100760257 6315-2Z-C3
80 170 39 27,500 19,300 100760295 6316-C3 100760302 6316-2RSR-C3 100760300 6316-2Z-C3
85 180 41 28,500 20,000 100760332 6317-C3 100760338 6317-2RSR-C3 100760336 6317-2Z-C3
90 190 43 30,000 22,800 100760369 6318-C3 100760376 6318-2RSR-C3 100760374 6318-2Z-C3
95 200 45 32,500 25,500 100760398 6319-C3 — — 100760401 6319-2Z-C3
100 215 47 36,500 30,500 100760427 6320-C3 — — 100760432 6320-2Z-C3
294 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing
Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate
contamination is present in the operation.
Features: Applications:
• Complies with RoHS restrictions on the use of certain hazardous • Transmissions • Elevators
substances in electrical and electronic equipment • Electric motors and generators • Conveying equipment
• For deep groove ball bearings, if the bearing load is too small • Electrical appliances • Hoists and cranes
during operation, slippage occurs between the balls and raceways, • Pumps and compressors • Power hand tools
which may result in smearing • Blowers and fans • Industrial valves
• The higher the weight of balls and cage, the higher this tendency • Speed changers • Rolling mill machinery
becomes, especially for large bearings • Gearboxes and drives • Textile machinery
• If very small bearing loads are expected, please contact Applied® • Woodworking machinery • Paper machinery
for selection of an appropriate bearing • Lawn and garden equipment • Printing machinery
• Turbines • Food products machinery
• Farm machinery • Packaging machinery
• Construction machinery • Industrial clutches
• Oil field machinery • Slip joints
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 295
Bearings
Continued from previous page.
HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing
Contact your local Applied® service center at 1-866-351-3464 for more information.
296 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
NTN’s made-in-Japan premium quality ball bearings deliver the quietest and broadest range of radial ball bearings in the industry!
Electric motor quality deep groove ball bearings are NTN’s standard. NTN deep groove ball bearings were designed to run smoother and quieter – for use in electric motors and
other critical machine applications.
Widest breadth of product available for the industrial aftermarket. No matter the application, NTN has you covered. With the broadest selection of ball bearing products available,
including a complete offering of open, shields, seals and snap ring combinations – you’ll never have to go anywhere else.
Easily interchangeable. NTN deep groove ball bearings are dimensionally interchangeable with competitor deep groove ball bearing products.
Features:
• Optimized product design, quality materials and 100% in process inspection;
NTN best-in-class quality
• High precision super finished raceways for reduced friction; quietest bearing in the industry
• Customized sealing/shielding options; less contamination and higher speeds for longer life
• Low torque and low runout means higher allowable speeds for longer life
• Supports different load types
• Available for several industrial applications for longer life
Open Enclosure
I.D. O.D. Width Limiting Speed Grease Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (kN) (kN) Item No. Mfr. No.
26 8 29,000 5.05 1.96 100757475 6000
30 9 25,000 5.65 2.38 100757484 6200
10
35 11 23,000 9.01 3.49 100757502 6300
28 8 26,000 5.65 2.75 100757511 6001
12 32 10 22,000 6.75 2.76 100757518 6201
37 12 20,000 10.80 4.20 100757536 6301
32 9 22,000 6.20 2.84 100757551 6002
15 35 11 19,000 8.60 3.60 100757561 6202
42 13 17,000 12.70 5.47 100757587 6302
35 10 20,000 7.75 3.35 100757618 6003
17 40 12 18,000 10.60 4.60 100757627 6203
47 14 16,000 15.00 6.55 100757653 6303
42 12 18,000 10.40 5.05 100757675 6004
20 47 14 16,000 14.20 6.65 100757686 6204
52 15 14,000 17.60 7.90 100757713 6304
47 12 15,000 11.20 5.85 100757746 6005
25 52 15 13,000 15.20 7.85 100757754 6205
62 17 12,000 23.50 10.90 100757794 6305
55 13 13,000 14.70 8.30 100757838 6006
30 62 16 11,000 21.60 11.30 100757851 6206
72 19 10,000 29.50 15.00 100757889 6306
62 14 12,000 17.70 10.32 100757927 6007
35 72 17 9,800 28.40 15.30 113443298 6207
80 21 8,800 37.00 19.00 100757972 6307
68 15 10,000 18.60 11.50 100758011 6008
40 80 18 8,700 32.50 17.79 100758024 6208
90 23 7,800 45.00 25.00 100758053 6308
75 16 9,200 23.20 15.10 100758088 6009
45 85 19 7,800 36.00 20.40 100758098 6209
100 25 7,000 58.50 32.00 100758129 6309
80 16 8,400 24.20 16.60 100758164 6010
50 90 20 7,100 39.00 23.20 100758173 6210
110 27 6,400 68.50 38.50 100758205 6310
90 18 7,700 31.50 21.20 100758241 6011
55 100 21 6,400 48.00 29.20 100758250 6211
120 29 5,800 79.50 45.00 100758280 6311
95 18 7,000 32.50 23.12 100758315 6012
60 110 22 6,000 58.00 36.00 100758327 6212
130 31 5,400 90.50 52.00 100758354 6312
100 18 6,500 34.00 25.20 100758384 6013
65 120 23 5,500 63.50 40.00 100758394 6213
140 33 4,900 103.00 60.00 100758421 6313
110 20 6,100 42.00 31.00 100758453 6014
70 125 24 5,100 69.00 44.00 100758462 6214
150 35 4,600 115.00 68.00 100758481 6314
115 20 5,700 44.00 33.50 100758506 6015
75 130 25 4,800 73.50 49.50 100758516 6215
160 37 4,300 126.00 77.00 100758534 6315
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 297
Bearings
Continued from previous page.
298 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 299
Bearings
Continued from previous page.
300 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 301
Bearings
Continued from previous page.
Super precision angular contact bearings are specifically designed for rigid, high speed, high precision machine tool spindles. Their state-of-the-art preload control ensures
consistent high performance. Both standard and high speed ROBUST designs are available to meet the varied needs of the industry.
Features: Applications:
• Complies with RoHS restrictions on the use of certain hazardous substances in • Machine tool spindles on:
electrical and electronic equipment Lathes
Boring machinery
Grinders
Machining centers
Milling machines
Slicing machines
Drilling machines
Gem-cutting machines
No Snap Ring
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating Open
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
17 35 10 44,300 67,400 1,490 860 101517576 7003CTRDULP4Y
20 42 12 37,100 56,500 2,490 1,470 101517968 7004CTRDULP4Y
25 47 12 32,000 48,700 2,620 1,660 102157299 7005CTRDULP4Y
30 55 13 27,100 41,200 3,400 2,310 101938954 7006CTRDULP4Y
35 62 14 23,800 36,100 4,300 3,060 101518122 7007CTRDULP4Y
40 68 15 21,300 32,500 4,630 3,570 101973720 7008CTRDULP4Y
45 75 16 19,200 29,200 5,490 4,320 101544734 7009CTRDULP4Y
50 80 16 17,700 27,000 5,840 4,920 101518437 7010CTRDULP4Y
55 90 18 15,900 24,200 7,720 6,440 101470117 7011CTRDULP4Y
60 95 18 14,900 22,600 7,940 6,940 101518277 7012CTRDULP4Y
65 100 18 14,000 21,300 8,380 7,720 101518350 7013CTRDULP4Y
70 110 20 12,800 19,500 10,600 9,700 102146375 7014CTRDULP4Y
75 115 20 12,200 18,500 10,800 10,300 101518542 7015CTRDULP4Y
80 125 22 11,300 17,100 13,200 12,500 101517479 7016CTRDULP4Y
85 130 22 10,700 16,300 13,600 13,200 101517481 7017CTRDULP4Y
90 140 24 10,000 15,300 16,100 15,500 101518023 7018CTRDULP4Y
95 145 24 9,600 14,600 16,500 16,400 101540481 7019CTRDULP4Y
100 150 24 9,200 14,000 17,000 17,400 101519022 7020CTRDULP4Y
302 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to
accommodate both radial and axial loads (in one direction).
Features: Applications:
• Inner and outer ring raceway • Pumps
• Suitable for simultaneously acting radial and axial loads • Compressors
• Axial load capacity increases with increasing contact angle • Centrifuges
No Snap Ring
I.D. O.D. Width Limiting Speed Reference Speed Dynamic Load Rating Static Load Rating Open
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
20 47 14 19,000 18,000 3,150 1,870 101171913 7204 BECBY
25 52 15 17,000 17,000 3,510 2,290 100756062 7205 BECBY
30 62 16 14,000 14,000 5,350 3,510 100756153 7206 BECBY
35 72 17 12,000 12,000 6,900 4,680 100756251 7207 BECBY
40 80 18 11,000 11,000 8,180 5,850 101173913 7208 BECBY
45 85 19 10,000 10,000 8,480 6,300 101169318 7209 BECBY
50 90 20 9,000 9,000 8,770 6,860 101169319 7210 BECBY
55 100 21 8,000 7,500 11,000 8,540 100756644 7211 BECBY
60 110 22 7,500 7,500 12,900 10,200 100756729 7212 BECBY
65 120 23 6,700 6,300 14,900 12,100 101169320 7213 BECBY
75 130 25 6,000 5,600 16,400 14,400 100756943 7215 BECBY
80 140 26 5,600 5,600 18,700 16,500 100756997 7216 BECBY
100 180 34 4,300 4,000 30,400 27,400 100757166 7220 BECBM
110 200 38 3,800 3,600 36,600 34,400 100757212 7222 BECBM
Super precision angular contact bearings are specifically designed for rigid, high speed, high precision machine tool spindles. Their state-of-the-art preload control ensures
consistent high performance. Both standard and high speed ROBUST designs are available to meet the varied needs of the industry.
Features: Applications:
• Complies with RoHS restrictions on the use of certain hazardous substances in • Machine tool spindles on:
electrical and electronic equipment Lathes
Boring machinery
Grinders
Machining centers
Milling machines
Slicing machines
Drilling machines
Gem-cutting machines
No Snap Ring
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating Open
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
17 40 12 40,400 61,500 2,450 1,310 101517568 7203CTRDULP4Y
20 47 14 34,400 52,300 3,260 1,820 102153104 7204CTRDULP4Y
30 62 16 25,000 38,100 5,180 3,310 102100064 7206CTRDULP4Y
35 72 17 21,500 32,800 6,830 4,480 101518427 7207CTRDULP4Y
45 85 19 17,700 27,000 9,150 6,480 101518021 7209CTRDULP4Y
50 90 20 16,500 25,000 9,590 7,170 101517474 7210CTRDULP4Y
55 100 21 14,900 22,600 11,900 9,040 101511098 7211CTRDULP4Y
60 110 22 13,600 20,600 14,400 11,000 101540476 7212CTRDULP4Y
65 120 23 12,500 19,000 16,400 13,200 101511001 7213CTRDULP4Y
70 125 24 11,800 18,000 17,900 14,600 101518536 7214CTRDULP4Y
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 303
Bearings
Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction
of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
Features: Applications:
• Inner and outer ring raceway • Pumps
• Suitable for simultaneously acting radial and axial loads • Compressors
• Axial load capacity increases with increasing contact angle • Centrifuges
No Snap Ring
Dynamic Static Open
Limiting Reference Load Load
I.D. O.D. Width Speed Speed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Cage Type Guide Type Item No. Mfr. No.
20 52 15 18,000 18,000 4,270 2,340 Pressed Brass Ball 100756015 7304 BECBY
Machined Brass Rolling Element 101169324 7305 BECBM
25 62 17 15,000 15,000 5,850 3,510
Pressed Brass Ball 100756099 7305 BECBY
30 72 19 13,000 13,000 7,760 4,770 Pressed Brass Ball 100756196 7306 BECBY
35 80 21 11,000 11,000 8,770 5,510 Pressed Brass Ball 100756294 7307 BECBY
Machined Brass Rolling Element 100756393 7308 BECBM
40 90 23 10,000 10,000 11,000 7,530
Pressed Brass Ball 100756396 7308 BECBY
Machined Brass Rolling Element 100756500 7309 BECBM
45 100 25 9,000 9,000 13,600 9,330
Pressed Brass Ball 100756501 7309 BECBY
Machined Brass Rolling Element 100756594 7310BECBM
50 110 27 8,000 8,000 16,700 11,500
Pressed Brass Ball 100756595 7310 BECBY
Machined Brass Rolling Element 100756681 7311 BECBM
55 120 29 7,000 7,000 19,200 13,500
Pressed Brass Ball 100756684 7311 BECBY
Machined Brass Rolling Element 100756759 7312 BECBM
60 130 31 6,700 6,700 21,500 15,600
Pressed Brass Ball 100756758 7312 BECBY
Machined Brass Rolling Element 100756837 7313 BECBM
65 140 33 6,300 6,300 24,300 18,000
Pressed Brass Ball 100756838 7313 BECBY
Machined Brass Rolling Element 100756901 7314 BECBM
70 150 35 5,600 5,600 26,800 20,200
Pressed Brass Ball 100756904 7314 BECBY
Machined Brass Rolling Element 100756962 7315 BECBM
75 160 37 5,300 5,300 29,900 23,800
Pressed Brass Ball 100756963 7315 BECBY
80 170 39 5,000 5,000 32,200 26,500 Machined Brass Rolling Element 100757014 7316 BECBM
110 240 50 3,400 3,200 50,600 50,400 Machined Brass Rolling Element 100757223 7322 BECBM
Super precision angular contact bearings are specifically designed for rigid, high speed, high precision machine tool spindles.
Their state-of-the-art preload control ensures consistent high performance. Both standard and high speed ROBUST designs
are available to meet the varied needs of the industry.
Features: Applications:
• Complies with RoHS restrictions on the use of certain hazardous substances in • Machine tool spindles on:
electrical and electronic equipment Lathes
Boring machinery
Grinders
Machining centers
Milling machines
Slicing machines
Drilling machines
Gem-cutting machines
No Snap Ring
Limiting Speed Limiting Speed Dynamic Load Static Load Open
I.D. O.D. Width Grease Oil Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
17 30 7 49,000 74,500 1,120 660 101520623 7903CTRDULP4Y
20 37 9 40,400 61,500 1,570 950 101460887 7904CTRDULP4Y
25 42 9 34,400 52,300 1,760 1,220 101421276 7905CTRDULP4Y
30 47 9 29,900 45,500 1,860 1,410 101464563 7906CTRDULP4Y
35 55 10 25,600 38,900 2,710 2,050 101540471 7907CTRDULP4Y
40 62 12 22,600 34,400 3,400 2,650 101519555 7908CTRDULP4Y
45 68 12 20,400 31,000 3,590 3,000 101518339 7909CTRDULP4Y
50 72 12 18,900 28,700 3,790 3,370 101510999 7910CTRDULP4Y
55 80 13 17,100 26,000 4,300 3,990 102180788 7911CTRDULP4Y
60 85 13 15,900 24,200 4,370 4,210 101518338 7912CTRDULP4Y
65 90 13 14,900 22,600 4,540 4,610 101540470 7913CTRDULP4Y
70 100 16 13,600 20,600 6,330 6,240 101518265 7914CTRDULP4Y
304 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
X-Life™ Double Row Angular Contact Ball Bearing
Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide,
sheet steel or brass cages. They are similar in design to single row angular contact ball bearings in pairs in an O arrangement, but
offer a narrower design. They differ in the size of their contact angle and in the design of the bearing rings. Sealed versions are
maintenance-free and, as a result, allow particularly economical bearing arrangements.
Features: Applications:
• Innovative steel cage design • Fluid pumps
• 30° contact angle • Compressors
• P6 manufacturing tolerance for optimized waviness, roughness and roundness • Gearboxes
• Improved raceway surfaces and ball quality • Elevators
• Innovative light contact HRS seal (axial contact to the inner ring) • Packaging equipment
• New Z dust shield • Motorcycles
• Double sealed/shielded versions filled with grease on both sides • Machine tools
• Lower total cost of ownership (TCO) • Textile machines
• Generates less noise and less heat
• Suitable for higher loads (especially under axial loads)
• More energy efficient
• Longer operating life
• Extended grease life
Call us at 1-866-351-3464 to find out how you can save by doing business with Applied®.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 305
Bearings
Fafnir® Extra Small 30 Metric Series Bearing
Applications:
• General industrial
• Automotive
• Agricultural
• Chemical
• Utilities
306 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Light 2MM200WI Series Ball Bearing
Applications:
• High speed grinding
• High speed boring and milling
• Precision vertical and horizontal milling spindles
• High speed routing No. in Set: Duplex Set
Precision Level: Extra Precision (ABEC 7)
Bearing Arrangement: Universal
Contact Angle: 15°
Preload Level: Light
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
17 40 12 33,500 58,100 2,750 1,320 101020568 2MM203WI DUL
20 47 14 28,600 48,600 3,750 1,810 101020571 2MM204WI DUL
25 52 15 23,800 40,500 4,250 2,320 101020574 2MM205WI DUL
30 62 16 20,000 34,200 5,850 3,310 101020577 2MM206WI DUL
35 72 17 17,300 29,400 7,800 4,490 101020581 2MM207WI DUL
40 80 18 15,400 26,200 9,300 5,340 101020584 2MM208WI DUL
45 85 19 14,000 22,800 10,400 6,470 101020588 2MM209WI DUL
50 90 20 12,500 21,800 11,000 7,130 101020592 2MM210WI DUL
Features:
• Ground raceways are 52100 chrome steel material with steel retainers
• Maximum recommended speed is 5,000 rpm
• Prelubricated with grease
• Suitable for the majority of ABEC-1 bearing applications
No Snap Ring
I.D. O.D. Width Dynamic Load Rating Static Load Rating Double Sealed Double Shielded
(in) (in) (in) (lbf) (lbf) Item No. Mfr. No. Item No. Mfr. No.
1/4 500 201 — — 102073602 21104-77
1/4 11/16
5/16 500 201 102056394 21104-88a — —
9/32 751 318 — — 102057501 21405-77
7/8
5/16 11/32 751 318 102067209 21405-88a — —
29/32 5/16 607 291 102057309 21505-88 102067210 21505-77
9/32 751 318 — — 102057304 21406-77
7/8
11/32 751 318 101351436 21406-88a — —
3/8
29/32 5/16 607 291 102060320 21506-88 102102621 21506-77
1 1/8 3/8 1,151 538 102057381 21806-88 102056403 21806-77
29/32 5/16 607 291 102062150 21507-88 102059153 21507-77
7/16 1 1/8 3/8 1,151 538 102060321 21807-88 102057503 21807-77
1 3/8 7/16 1,526 746 102060330 22207-88 102062153 22207-77
1 1/8 3/8 1,151 538 102058942 21808-88 102057316 21808-77
1/2
1 3/8 7/16 1,526 746 101351437 22208-88 102060322 22208-77
1 3/8 7/16 1,526 746 102057391 22210-88 102057390 22210-77
5/8 1 5/8 1/2 1,951 1,010 102072489 22610-88 102102629 22610-77
1 3/4 1/2 1,951 1,010 102057395 22810-88 102067282 22810-77
1 5/8 1/2 1,951 1,010 101343277 22612-88 102058699 22612-77
3/4 1 3/4 1/2 1,951 1,010 102067221 22812-88 102059385 22812-77
2 9/16 2,914 1,565 102060327 23212-88 102102630 23212-77
7/8 2 9/16 2,914 1,565 102060328 23214-88 102072490 23214-77
1 2 9/16 2,914 1,565 102060329 23216-88 102067222 23216-77
1 1/8 2 1/2 5/8 3,751 2,195 102057322 24018-88 102057398 24018-77
1 1/4 2 1/2 5/8 3,751 2,195 102059386 24020-88 102066062 24020-77
Additional sizes available.
Width is 1/16” wider than shielded width.
a
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 307
Bearings
The flange positions the bearing during installation, eliminating the need for snap rings or counter-boring the housing.
Features: Applications:
• Inner and outer rings are machined from selected carbon steel, then carefully • Moderate speeds and loads
hardened for long life and maximum shock resistance • Toys
• Full complement of hardened steel balls • Appliances
• Bearings are zinc-plated for protection against corrosion • Business machines
• Conveyors
• Display stands
No Snap Ring
Snap ring allows for easy positioning during mounting and eliminates costly machining operations.
Features:
• Ground raceways are 52100 chrome steel material with steel retainers
• Factory lubricated and sealed
Double Sealed
Snap ring allows for easy positioning during mounting and eliminates costly machining operations.
Features:
• Extended inner ring equipped with two setscrews to secure the ring to the shaft
• Ground raceways are 52100 chrome steel material with steel retainers
• Factory lubricated and sealed
308 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Chrome Steel Ball
Grade: Grade 25
Ball Dia.Tolerance: ±0.0001
Material: Steel
Cones Cups
Max. Shaft Max. Housing
I.D. Cone Width Fillet Radius O.D. Cup Width Fillet Radius
Series Item No. Mfr. No. (in) (in) (in) Item No. Mfr. No. (in) (in) (in)
255 — — — — — 100001480 2520 2.6150 0.8125 0.13
335 100001095 342A 1.6250 1.1800 0.14 100001084 332 3.1500 0.7018 0.05
— — — — — 100721114 3525 3.4375 0.9375 0.13
355
— — — — — 100001104 354A 3.3460 0.6875 0.05
100001123 368A 2.0000 0.8750 0.14 100001115 363 3.5430 0.7874 0.03
365 100001122 368 2.0000 0.8750 0.06 100001114 362A 3.5000 0.6501 0.05
100001120 NA366 1.9685 0.9850 0.14 100001113 362 3.5430 0.6250 0.08
375 — — — — — 100721130 3730 3.6720 0.9375 0.03
100001148 386A 1.8750 0.8640 0.03 100001137 382 3.8750 0.7018 0.03
100001149 387 2.2500 0.8640 0.09 100001138 382A 3.8125 0.6250 0.03
100001150 387A 2.2500 0.8640 0.14 100001140 383A 3.9370 0.7018 0.08
385
100001151 387AS 2.2500 0.8640 0.20 — — — — —
100001152 387S 2.2500 0.8640 0.03 — — — — —
100001153 388A 2.2650 0.8640 0.14 — — — — —
100001156 390 2.2500 0.8660 0.09 100001160 394A 4.3310 0.7411 0.05
100001157 390A 2.5000 0.8660 0.06 100001163 394AS 4.3310 0.7411 0.13
100001166 395 2.5000 0.8660 0.14 — — — — —
100001167 395A 2.6250 0.8660 0.03 — — — — —
395
100001170 395S 2.6250 0.8660 0.14 — — — — —
100001173 396 1.9685 0.8660 0.03 — — — — —
100001175 399A 2.6875 0.8660 0.09 — — — — —
100001176 399AS 2.6875 0.8660 0.20 — — — — —
100001201 455 2.0000 1.1540 0.03 100001198 453A 4.2500 0.8750 0.03
455
100001207 462 2.2500 1.1540 0.09 100001199 453X 4.1250 0.9687 0.13
475 — — — — — 100001212 472 4.7240 0.9542 0.08
100001230 495 3.2500 1.1720 0.14 100001227 492A 5.2500 0.8750 0.13
100001231 495A 3.0000 1.1720 0.14 100001228 493 5.3750 0.8750 0.13
495
100001236 497 3.3750 1.1720 0.14 — — — — —
100001239 498 3.3125 1.1720 0.14 — — — — —
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 309
Bearings
Continued from previous page.
Material: Steel
Cones Cups
Max. Shaft Max. Housing
I.D. Cone Width Fillet Radius O.D. Cup Width Fillet Radius
Series Item No. Mfr. No. (in) (in) (in) Item No. Mfr. No. (in) (in) (in)
525 100001249 529 2.0000 1.4200 0.03 100001241 522 4.0000 1.0625 0.13
555 100001267 555S 2.2500 1.4440 0.14 100001261 552A 4.8750 1.1875 0.13
100001282 566 2.7500 1.4240 0.14 100001277 563 5.0000 1.1250 0.13
565
100001284 567 2.8750 1.4240 0.14 — — — — —
100001293 575 3.0000 1.4240 0.14 100001291 572 5.5110 1.1250 0.13
575
100001298 580 3.2500 1.4210 0.14 — — — — —
100001310 593 3.5000 1.4300 0.14 100001306 592A 6.0000 1.1875 0.13
595 100001315 594 3.7500 1.4300 0.14 — — — — —
100001316 594A 3.7500 1.4300 0.20 — — — — —
615 100001331 623 2.2500 1.6250 0.14 100001325 612 4.7500 1.2500 0.13
— — — — — 100001332 632 5.3750 1.2500 0.13
635
— — — — — 100001336 633 5.1250 1.2500 0.13
100001350 655 2.7500 1.6250 0.14 100001346 652 6.0000 1.2500 0.13
655
100001357 663 3.2500 1.6250 0.14 100001349 653 5.7500 1.2500 0.13
675 100001368 687 4.0000 1.6250 0.14 100001361 672 6.6250 1.1875 0.13
745 100001381 749 3.3475 1.8370 0.14 100001373 742 5.9090 1.4375 0.13
755 100001396 759 3.5000 1.9000 0.14 100001388 752 6.3750 1.5000 0.13
775 100001409 780 4.0000 1.8900 0.14 100001402 772 7.1250 1.5000 0.13
795 — — — — — 100001415 792 8.1250 1.3750 0.13
835 — — — — — 100001417 832 6.6250 1.6250 0.13
100001429 861 4.0000 2.2650 0.31 100001425 854 7.5000 1.7500 0.13
855
100001432 864 3.7500 2.2650 0.31 — — — — —
895 — — — — — 100001435 892 9.0000 1.7500 0.13
935 100001442 938 4.5000 2.6250 0.28 100001439 932 8.3750 2.1250 0.13
1200 100001450 1280 0.8750 0.8750 0.03 — — — — —
1300 100001453 1380 0.8750 0.7940 0.06 100001451 1328 2.0625 0.5625 0.06
100001459 1779 0.9375 0.7810 0.03 100001454 1729 2.2400 0.6250 0.05
1700
100001460 1780 1.0000 0.7810 0.03 — — — — —
1900 100001468 1986 1.0000 0.7620 0.05 100001464 1931 2.3750 0.6250 0.05
100001488 2580 1.2500 0.9980 0.03 100001481 2523 2.7500 0.7500 0.05
2500
100001490 2585 1.3125 0.9980 0.14 — — — — —
100001495 2687 1.0000 1.0010 0.05 100001492 2631 2.6150 0.7500 0.05
2600
100001497 2689 1.1250 1.0010 0.05 — — — — —
100721075 2788 1.5000 1.0100 0.14 100001499 2720 3.0000 0.7500 0.13
100721077 2789 1.5625 1.0100 0.14 100001500 2729 3.0000 0.7500 0.03
2700
100721079 2793 1.3750 1.0100 0.03 100001502 2735X 2.8750 0.7500 0.03
100721081 2796 1.3750 1.0100 0.14 — — — — —
3100 100721091 3188 1.2500 1.1810 0.03 100721087 3120 2.8590 0.9375 0.13
3300 — — — — — 100721095 3320 3.1560 0.9375 0.13
3400 100721111 3490 1.5000 1.1720 0.14 100721106 3420 3.1250 0.9375 0.13
3500 100721119 3578 1.7500 1.2160 0.14 — — — — —
100721133 3767 2.0625 1.1930 0.09 100721126 3720 3.6720 0.9375 0.13
100721135 3775 2.0000 1.1930 0.03 100721131 3732 3.8750 0.9375 0.13
3700
100721140 3780 2.0000 1.1930 0.14 — — — — —
100721143 3782 1.7500 1.1930 0.14 — — — — —
100721150 3876 1.5000 1.1875 0.14 100721145 3820 3.3750 0.9375 0.13
3800
100721151 3877 1.6250 1.1875 0.14 — — — — —
100721163 3979 2.2500 1.1830 0.14 100721156 3920 4.4375 0.9375 0.13
100721166 3982 2.5000 1.1830 0.14 — — — — —
3900
100721167 3984 2.6250 1.1830 0.14 — — — — —
100721168 3994 2.6250 1.1830 0.22 — — — — —
5500 — — — — — 100721185 5535 4.8125 1.4375 0.13
5700 — — — — — 100721196 5735 5.3440 1.3750 0.13
6200 — — — — — 100721205 6220 5.0000 1.6250 0.13
6300 — — — — — 100721208 6320-2 5.3450 1.7500 0.13
6400 100721219 6461 3.0000 2.1350 0.14 100721216 6420 5.8750 1.7500 0.13
6500 100721230 6580 3.5000 2.1690 0.14 100721223 6535 6.3750 1.6875 0.13
9200 100721245 9285 3.0000 1.8125 0.14 100721244 9220 6.3750 1.2500 0.13
9300 — — — — — 100721249 9321 6.7500 1.2500 0.13
100721256 02474 1.1250 0.8750 0.03 100721253 02420 2.6875 0.6875 0.06
02400
100721257 02475 1.2500 0.8750 0.14 — — — — —
310 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Cones Cups
Max. Shaft Max. Housing
I.D. Cone Width Fillet Radius O.D. Cup Width Fillet Radius
Series Item No. Mfr. No. (in) (in) (in) Item No. Mfr. No. (in) (in) (in)
02800 — — — — — 100721259 02820 2.8750 0.6875 0.13
100721268 05062 0.6250 0.5660 0.06 100721274 05185 1.8500 0.4375 0.05
05000 100721271 05075 0.7500 0.5660 0.05 — — — — —
100721273 05079 0.7869 0.5660 0.06 — — — — —
100721277 07087 0.8750 0.5610 0.05 100721285 07196 1.9690 0.3750 0.04
100721279 07097 0.9843 0.5610 0.06 100721286 07204 2.0470 0.5000 0.05
07000
100721280 07098 0.9835 0.5610 0.06 — — — — —
100721281 07100 1.0000 0.5610 0.04 — — — — —
08000 100721288 08125 1.2500 0.5940 0.04 100721290 08231 2.3125 0.4219 0.04
100721292 09067 0.7500 0.7500 0.05 100721297 09194 1.9380 0.6875 0.14
100721293 09074 0.7500 0.8480 — 100721298 09195 1.9380 0.5625 0.05
09000
100721295 09078 0.7500 0.8480 0.05 100721299 09196 1.9380 0.6875 0.06
100721296 09081 0.8120 0.8480 0.06 — — — — —
11500 100721306 11590 0.6250 0.5625 0.06 100721305 11520 1.6875 0.3750 0.06
12500 100721319 12580 0.8125 0.7810 0.06 100721318 12520 1.9380 0.6250 0.06
100721338 13685 1.5000 0.7500 0.14 100721334 13620 2.7170 0.5938 0.03
13600 100721339 13686 1.5000 1.0310 0.06 100721335 13621 2.7170 0.5938 0.09
100721340 13687 1.5000 0.7500 0.08 — — — — —
13800 100721343 13889 1.5000 0.4690 0.06 — — — — —
100721352 14124 1.2500 0.7710 0.03 100721361 14274 2.7170 0.6250 0.13
100721353 14125A 1.2500 0.7710 0.14 100721364 14276 2.7170 0.6250 0.05
100721354 14130 1.3125 0.7710 0.14 — — — — —
14000
100721356 14136A 1.3750 1.0520 0.03 — — — — —
100721357 14137A 1.3750 0.7710 0.06 — — — — —
100721358 14138A 1.3750 0.7710 0.14 — — — — —
100721368 15100 1.0000 0.8125 0.14 100721386 15243 2.4375 0.5625 0.08
100721369 15101 1.0000 0.8125 0.03 100721387 15244 2.4410 0.6250 0.05
100721374 15112 1.1250 0.8125 0.14 100721388 15245 2.4410 0.5625 0.05
100721375 15113 1.1250 0.8125 0.03 100721389 15250 2.5000 0.6250 0.05
100721377 15117 1.1806 0.8125 0.05 100721392 15250X 2.5000 0.6250 0.06
15000
100721380 15118 1.1895 0.8125 0.14 — — — — —
100721382 15120 1.1895 0.8125 0.03 — — — — —
100721383 15123 1.2500 0.7500 — — — — — —
100721384 15125 1.2500 0.8125 0.14 — — — — —
100721385 15126 1.2500 0.8125 0.03 — — — — —
100721397 15578 1.0000 0.6875 0.05 100721393 15520 2.2500 0.5313 0.06
15500 100721398 15580 1.0625 0.6875 0.14 — — — — —
100721399 15590 1.1250 0.6875 0.14 — — — — —
16000 100721400 16150 1.5000 0.8125 0.14 — — — — —
17000 — — — — — 100721406 17244 2.4410 0.5625 0.06
17500 100721410 17580 0.6250 0.6560 0.06 100721409 17520 1.6875 0.5313 0.06
18500 100721419 18590 1.6250 0.6875 0.14 100721417 18520 2.8750 0.5000 0.06
18600 100721422 18690 1.8125 0.6875 0.11 100721420 18620 3.1250 0.5313 0.06
18700 100721426 18790 2.0000 0.6875 0.14 100721423 18720 3.3460 0.5313 0.06
19000 100721429 19150 1.5000 0.6500 0.06 100721430 19268 2.6875 0.4688 0.06
21000 100721433 21075 0.7500 0.8600 0.06 100721434 21212 2.1250 0.6250 0.09
23000 100721467 23100 1.0000 0.8450 0.06 100721471 23256 2.5625 0.6250 0.06
24700 100721495 24780 1.6250 0.9060 0.14 100721490 24720 3.0000 0.6875 0.03
100721509 25580 1.7500 1.0000 0.14 100721497 25520 3.2650 0.7500 0.03
100721510 25581 1.7500 1.0000 0.02 100721498 25521 3.2700 0.7500 0.13
25500
100721513 25584 1.7710 1.0000 0.06 100721500 25523 3.2650 0.8750 0.09
100721514 25590 1.7960 1.0000 0.14 — — — — —
100721518 25877 1.3750 0.9690 0.06 100721516 25820 2.8750 0.7500 0.09
25800
100721520 25880 1.4365 0.9690 0.06 100721517 25821 2.8750 0.7500 0.03
100721538 26882 1.6250 1.0000 0.14 100721530 26822 3.1250 0.7500 0.03
26800
100721540 26884 1.6880 1.0000 0.14 100721533 26823 3.0000 0.8125 0.06
27600 100721549 27690 3.2813 1.0000 0.14 100721543 27620 4.9375 0.7813 0.06
100721568 28580 2.0000 1.0000 0.14 100721566 28521 3.6250 0.7813 0.03
28500
100721569 28584 2.0625 1.0000 0.14 — — — — —
28600 100721575 28682 2.2500 0.9690 0.14 100721571 28622 3.8440 0.7656 0.03
100721580 28985 2.3750 1.0000 0.14 100721578 28920 4.0000 0.7813 0.13
28900
— — — — — 100721579 28921 3.9370 0.7813 0.13
29500 100721590 29585 2.5000 1.0000 0.14 100721584 29520 4.2500 0.7500 0.13
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 311
Bearings
Continued from previous page.
Cones Cups
Max. Shaft Max. Housing
I.D. Cone Width Fillet Radius O.D. Cup Width Fillet Radius
Series Item No. Mfr. No. (in) (in) (in) Item No. Mfr. No. (in) (in) (in)
100721595 29675 2.7500 1.0000 0.06 100721592 29620 4.4375 0.7500 0.13
29600
100721596 29685 2.8750 1.0000 0.14 — — — — —
31500 100721640 31594 1.3750 1.1250 0.06 100721636 31520 3.0000 0.9375 0.13
100721685 33281 2.8125 1.1875 0.14 100721687 33462 4.6250 0.9375 0.13
33000 100721684 33275 2.7500 1.1875 0.14 — — — — —
100721686 33287 2.8750 1.1875 0.14 — — — — —
33800 — — — — — 100721690 33821 3.7500 0.8750 0.09
100721700 34300 3.0000 0.9060 0.08 100721705 34478 4.7810 0.6875 0.08
34000
100721703 34306 3.0625 0.9060 0.14 — — — — —
36600 100721711 36690 5.7500 1.1250 0.06 100721710 36620 7.6250 0.9063 0.06
37000 100721714 37425 4.2500 0.8440 0.14 100721716 37625 6.2500 0.6250 0.13
39000 100721725 39250 2.5000 0.8660 0.08 — — — — —
100721735 39585 2.5000 1.1875 0.14 100721728 39520 4.4375 0.9375 0.13
39500
100721737 39590 2.6250 1.1875 0.14 — — — — —
41000 — — — — — 100721743 41286 2.8590 0.6875 0.06
100721751 42381 3.8125 1.1410 0.14 100721752 42584 5.8440 0.8438 0.12
42000
— — — — — 100721754 42587 5.8750 0.9688 0.13
42600 100721756 42687 3.0000 1.2200 0.14 100721755 42620 5.0000 0.8750 0.13
100721760 43125 1.2500 0.9480 0.06 100721763 43312 3.1250 0.6875 0.06
43000 100721761 43131 1.3125 0.9480 0.14 — — — — —
100721762 43132 1.3125 0.9480 0.08 — — — — —
44000 100721772 44162 1.6250 0.9330 0.09 100721774 44348 3.4840 0.6875 0.06
45200 100721792 45290 2.2500 1.2190 0.09 100721784 45220 4.1250 0.9375 0.13
46700 100721805 46790 6.5000 1.5625 0.14 100721800 46720 8.8750 1.3125 0.13
47400 — — — — — 100721808 47420 4.7240 1.0313 0.13
47600 100721817 47686 3.2500 1.3125 0.14 100721811 47620 5.2500 1.0313 0.13
47800 — — — — — 100721821 47820 5.7500 1.0313 0.13
48200 100721831 48290 5.0000 1.5000 0.14 100721826 48220 7.1875 1.3125 0.13
48300 100721838 48393 5.3750 1.5625 0.14 100721835 48320 7.5000 1.3125 0.13
48600 100721849 48685 5.6250 1.5625 0.14 100721845 48620 7.8750 1.3437 0.13
52000 100721875 52400 4.0000 1.4220 0.14 100721878 52618 6.1875 1.0313 0.13
53000 100721884 53176 1.7500 1.1140 0.05 100721887 53375 3.7500 0.8125 0.03
55000 — — — — — 100721901 55437 4.3750 0.8125 0.13
56000 100721905 56425 4.2500 1.4375 0.14 100721907 56650 6.5000 1.0625 0.13
59000 — — — — — 100721915 59412 4.1250 1.1250 0.13
64000 100721919 64450 4.5000 1.6250 0.14 100721920 64700 7.0000 1.1875 0.13
65000 — — — — — 100721929 65500 5.0000 1.3750 0.13
100721949 67388 5.0000 1.8125 0.14 100721947 67322 7.7500 1.5000 0.13
67300
100721952 67390 5.2500 1.8125 0.14 — — — — —
67700 100721961 67790 7.0000 1.8750 0.14 100721955 67720 9.7500 1.5000 0.13
68000 — — — — — 100721982 68712 7.1250 1.0000 0.13
71000 100721989 71450 4.5000 1.9375 0.14 100721994 71750 7.5000 1.3750 0.13
72000 — — — — — 100722003 72487 4.8750 1.0000 0.13
74000 — — — — — 100722015 74850 8.5000 1.3750 0.13
78000 — — — — — 100722032 78551 5.5130 0.9260 0.09
93000 — — — — — 100722104 93125 12.5000 1.8125 0.13
95000 100722117 95500 5.0000 2.5000 0.25 100722122 95925 9.2500 1.9375 0.13
98000 — — — — — 100722134 98788 7.8740 1.3750 0.13
99000 100722143 99600 6.0000 2.6250 0.28 100722137 99100 10.0000 1.8750 0.13
100721170 A4050 0.5000 0.4330 0.05 100721172 A4138 1.3770 0.3437 0.05
A4000
100721171 A4059 0.5901 0.4330 0.03 — — — — —
101189816 A6062 0.6250 0.4390 0.05 — — — — —
A6000 100721200 A6067 0.6690 0.4390 0.03 — — — — —
100721201 A6075 0.7500 0.4390 0.04 — — — — —
H211700 100722197 JH211749 2.5591 1.5160 0.12 100722196 JH211710 4.7240 1.2598 0.10
H307700 100722338 JH307749 2.1654 1.5350 0.12 100722337 JH307710 4.3310 1.2598 0.10
H414200 100722363 H414249 2.8125 1.6250 0.14 100722360 H414210 5.3750 1.2500 0.13
H715300 100722482 H715345 2.8125 1.8125 0.14 100722473 H715311 5.3750 1.4375 0.13
HH221400 100722225 HH221449 4.0000 2.2650 0.31 100722215 HH221410 7.5000 1.8125 0.13
HH224300 — — — — — 100722228 HH224310 8.3750 2.1250 0.13
HM88500 100722079 HM88542 1.2500 1.0940 0.05 100722076 HM88510 2.8750 0.9063 0.13
HM88600 100722084 HM88649 1.3750 1.0000 0.09 100722081 HM88610 2.8440 0.7812 0.09
312 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Cones Cups
Max. Shaft Max. Housing
I.D. Cone Width Fillet Radius O.D. Cup Width Fillet Radius
Series Item No. Mfr. No. (in) (in) (in) Item No. Mfr. No. (in) (in) (in)
100722093 HM89443 1.3125 1.1250 0.03 100722090 HM89410 3.0000 0.9063 0.13
HM89400 100722095 HM89446 1.3750 1.1250 0.14 — — — — —
100722096 HM89449 1.4375 1.1250 0.14 — — — — —
HM212000 100722203 HM212049 2.6250 1.5100 0.14 100722199 HM212011 4.8125 1.1700 0.13
HM218200 100722214 HM218248 3.5423 1.5750 0.28 100722213 HM218210 5.7860 1.2795 0.14
HM516400 100722407 HM516449C 3.2500 1.5625 0.14 100722404 HM516410 5.2500 1.2813 0.13
HM516800 100722409 JHM516849 3.3465 1.4960 0.12 100722408 JHM516810 5.5120 1.2402 0.10
HM522600 100722420 JHM522649 4.3307 1.8110 0.12 100722418 JHM522610 7.0870 1.4961 0.10
100722529 HM803146 1.6250 1.1560 0.14 100722526 HM803110 3.5000 0.9063 0.13
HM803100
100722530 HM803149 1.7500 1.1560 0.14 — — — — —
HM804800 100722538 HM804846 1.8750 1.1560 0.14 100722534 HM804810 3.7500 0.9063 0.13
100722549 HM807040 1.7500 1.4375 0.14 100722544 HM807010 4.1250 1.1250 0.13
HM807000
100722552 HM807046 2.0000 1.4375 0.14 — — — — —
HM903200 100722592 HM903249 1.7500 1.1250 0.14 100722588 HM903210 3.7500 0.8750 0.03
100721781 L44643 1.0000 0.5800 0.05 100721778 L44610 1.9800 0.4200 0.05
L44600
100721783 L44649 1.0625 0.5800 0.14 — — — — —
L45400 100721795 L45449 1.1417 0.5800 0.14 — — — — —
100721979 L68149 1.3775 0.6600 — 100721976 L68110 2.3280 0.4700 0.05
L68100
— — — — — 100721977 L68111 2.3610 0.4700 0.05
L69300 100721986 JL69349 1.4961 0.6690 — 100721985 JL69310 2.4800 0.5315 0.05
L610500 100722446 L610549 2.5000 0.7500 0.06 101191764 L610510 3.7190 0.5938 0.06
LM11700 100721309 LM11749 0.6875 0.5750 0.05 100721308 LM11710 1.5700 0.4200 0.05
LM11900 100721314 LM11949 0.7500 0.6550 0.05 100721312 LM11910 1.7810 0.4750 0.05
100721328 LM12749 0.8656 0.6550 0.05 100721325 LM12710 1.7810 0.4750 0.05
LM12700
— — — — — 100721326 LM12711 1.8100 0.4750 0.05
LM29700 — — — — — 100721599 LM29710 2.5625 0.5500 0.05
LM48500 100721841 LM48548 1.3750 0.7200 — 100721840 LM48510 2.5625 0.5500 0.05
100721943 LM67048 1.2500 0.6600 — 100721941 LM67010 2.3280 0.4650 0.05
LM67000
100721944 LM67049A 1.2500 0.6600 0.03 — — — — —
LM102900 100722152 LM102949 1.7812 0.7800 0.14 100722151 LM102910 2.8910 0.6200 0.03
100722160 LM104949 2.0000 0.8750 0.14 100722154 LM104911 3.2500 0.6500 0.05
LM104900
100722159 JLM104948 1.9685 0.8470 0.12 100722153 JLM104910 3.2280 0.6693 0.02
100722386 LM501349 1.6250 0.7800 0.14 100722382 LM501310 2.8910 0.5800 0.03
LM501300
— — — — — 100722384 LM501314 2.8910 0.6537 0.03
LM506800 100722392 JLM506849 2.1654 0.9050 0.06 100722390 JLM506810 3.5430 0.7283 0.02
LM508700 100722394 JLM508748 2.3622 0.9450 0.20 — — — — —
100722445 LM603049 1.7812 0.7810 0.14 100722441 LM603011 3.0625 0.5937 0.03
LM603000
— — — — — 100722442 LM603012 3.0625 0.6562 0.03
LM704600 — — — — — 100722461 JLM704610 3.3070 0.6890 0.06
LM710900 100722464 JLM710949C 2.5591 0.9050 0.12 100722463 JLM710910 4.1340 0.7283 0.04
LM813000 100722557 JLM813049 2.7559 0.9840 0.04 100722556 JLM813010 4.3310 0.8071 0.10
LM814800 100722568 LM814849 3.0625 1.0000 0.14 100722567 LM814810 4.6250 0.7500 0.13
M12600 100721324 M12649 0.8437 0.7200 0.05 100721321 M12610 1.9690 0.5500 0.05
M84500 100722048 M84548 1.0000 0.7650 0.06 100722047 M84510 2.2500 0.5800 0.06
M86600 100722060 M86649 1.1875 0.8440 0.06 100722057 M86610 2.5310 0.6563 0.06
M88000 100722072 M88048 1.3125 0.8750 0.03 100722067 M88010 2.6875 0.6875 0.06
M201000 100722187 M201047 1.5625 0.8700 0.03 100722186 M201011 2.8750 0.8400 0.09
M205100 100722190 JM205149 1.9685 1.1020 0.12 100722189 JM205110 3.5430 0.9055 0.10
M207000 100722193 JM207049 2.1654 1.1420 0.06 100722192 JM207010 3.7400 0.9252 0.10
M511900 100722396 JM511946 2.5591 1.1020 0.12 100722395 JM511910 4.3310 0.8858 0.10
M515600 100722402 JM515649 3.1496 1.3390 0.12 100722400 JM515610 5.1180 1.1220 0.10
M716600 100722487 JM716649 3.3465 1.1420 0.12 100722485 JM716610 5.1180 0.9449 0.10
M802000 100722525 M802048 1.6250 1.0100 0.14 100722524 M802011 3.2500 0.7950 0.13
M804000 100722533 M804049 1.8750 1.0000 0.14 100722531 M804010 3.5000 0.7500 0.13
M822000 100722572 JM822049 4.3307 1.3780 0.12 — — — — —
Technical Training
Properly trained maintenance workers prevent and reduce costly equipment
downtime. MaintenancePRO® courses from Applied Industrial Technologies offer
training on maintenance, troubleshooting, component application and failure analysis.
Courses can also be customized to specific needs.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 313
Bearings
Tapered Roller Bearing Cone & Cup Set
The most basic and widely used type of tapered roller bearing. It is comprised of two main separable parts, the inner race assembly cone and
the outer race cup. During equipment assembly, single-row bearings can be set to the required clearance (endplay) or preload condition to
optimize performance.
314 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
NSKHPS High Performance Standard Spherical Roller Bearing
Spherical roller bearings are double row, self-aligning bearings capable of carrying heavy radial loads combined with moderate thrust loads in either
direction. They are extremely resistant to shock loads and their self-aligning feature allows full capacity loading despite shaft deflection.
Features: Applications:
• Designed to handle very heavy loads, even under • Continuous casters • Gears, drives and reducers
misalignment or shaft deflection conditions • Other metal mill equipment • Construction equipment
• Spherical shape of outer ring raceway allows inner • Shaker screens and other vibratory • Oil field equipment
ring to tilt slightly relative to outer ring without equipment • Overhead cranes, crane hooks and
significant loss in bearing life • Papermaking equipment hoists
• Can also handle axial loading in either direction and • Mining equipment • Metal forming equipment
heavy shock loads • Blowers and fans • Railroad generators and alternators
• Complies with RoHS restrictions on the use of certain • Rubber and plastic forming equipment
hazardous substances in electrical and electronic • Pumps and compressors
equipment
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (rpm) (N) (N) Item No. Mfr. No.
40 90 33 4,300 5,300 122,000 129,000 101518584 22308CAME4
45 100 36 3,800 4,800 148,000 167,000 101519962 22309CAME4
50 110 40 3,600 4,300 186,000 211,000 101518581 22310CAME4
100 25 3,600 4,500 104,000 123,000 101544768 22211CAME4
55
120 43 3,200 4,000 209,000 241,000 101518158 22311CAME4
60 130 46 3,000 3,600 246,000 288,000 101104232 22312CAME4
65 120 31 3,000 3,800 152,000 190,000 101518247 22213CAME4
125 31 2,800 3,600 163,000 205,000 101518477 22214CAME4
70
150 51 2,600 3,200 305,000 370,000 101518240 22314CAME4
130 31 2,800 3,400 162,000 212,000 101518162 22215CAME4
75
160 55 2,400 3,000 340,000 414,000 101520669 22315CAME4
140 33 2,600 3,200 181,000 232,000 101370855 22216CAME4
80
170 58 2,200 2,800 389,000 476,000 101518319 22316CAME4
150 36 2,400 3,000 215,000 276,000 101518956 22217CAME4
85
180 60 2,000 2,600 416,000 507,000 101544761 22317CAME4
160 40 2,200 2,800 256,000 340,000 101518059 22218CAME4
90
190 64 2,000 2,400 485,000 595,000 101520667 22318CAME4
170 43 2,000 2,600 296,000 395,000 101544767 22219CAME4
95 45 1,500 2,000 430,000 435,000 113425903 21319CAME4
200
67 1,900 2,400 525,000 675,000 101104234 22319CAME4
46 2,000 2,400 329,000 440,000 101518058 22220CAME4
180
60.3 1,600 2,200 525,000 605,000 113426759 23220CAME4
100
47 1,400 1,900 495,000 485,000 101104213 21320CAME4
215
73 1,700 2,200 750,000 785,000 100766077 22320CAME4
56 1,600 2,000 565,000 545,000 101102257 23122CAME4
180
69 1,600 2,000 575,000 750,000 113426843 24122CAME4
53 1,800 2,200 425,000 585,000 101518381 22222CAME4
110 200
69.8 1,500 1,900 645,000 760,000 101518371 23222CAME4
50 1,300 1,700 565,000 545,000 113425911 21322CAME4
240
80 1,600 1,900 925,000 980,000 100766081 22322CAME4
46 1,800 2,200 395,000 525,000 101518903 23024CAME4
180
60 1,500 2,000 480,000 680,000 113426286 24024CAME4
62 1,400 1,800 580,000 720,000 101102261 23124CAME4
200
120 80 1,400 1,800 695,000 905,000 113426844 24124CAME4
58 1,600 2,000 489,000 690,000 101369526 22224CAME4
215
76 1,300 1,700 790,000 970,000 113426762 23224CAME4
260 86 1,400 1,800 1,060,000 1,120,000 100766085 22324CAME4
52 1,700 2,000 500,000 655,000 101518902 23026CAME4
200
69 1,400 1,800 620,000 865,000 113426797 24026CAME4
64 1,300 1,700 630,000 825,000 101102263 23126CAME4
210
130 80 1,300 1,700 735,000 1,010,000 113426851 24126CAME4
64 1,500 1,900 565,000 815,000 101544765 22226CAME4
230
80 1,200 1,600 875,000 1,080,000 111867477 23226CAME4
280 93 1,300 1,600 1,240,000 1,350,000 111105543 22326CAMW507
53 1,600 1,900 525,000 715,000 101518311 23028CAME4
210
69 1,300 1,700 635,000 905,000 113426799 24028CAME4
68 1,200 1,600 725,000 945,000 101369957 23128CAME4
225
140 85 1,200 1,600 835,000 1,160,000 113426867 24128CAME4
68 1,400 1,700 835,000 945,000 101518955 22228CAME4
250
88 1,100 1,500 1,040,000 1,300,000 101102309 23228CAME4
300 102 1,200 1,500 2,183,000 1,601,000 110746713 22328CAMW507
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 315
Bearings
Continued from previous page.
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (rpm) (N) (N) Item No. Mfr. No.
56 1,400 1,800 590,000 814,000 110746778 23030CAMW507
225
75 1,200 1,500 740,000 1,090,000 113426800 24030CAME4
80 1,100 1,400 905,000 1,180,000 101518308 23130CAME4
150 250
100 1,100 1,400 1,070,000 1,450,000 113426872 24130CAME4
270 73 1,300 1,600 955,000 1,121,000 110746652 22230CAMW507
320 108 1,100 1,400 1,530,000 1,690,000 110746722 22330CAMW507
60 1,300 1,700 675,000 955,000 101544756 23032CAME4
240
80 1,100 1,400 845,000 1,260,000 113426803 24032CAME4
86 1,000 1,300 1,070,000 1,400,000 101369354 23132CAME4
270
160 109 1,000 1,300 1,240,000 1,670,000 101544750 24132CAME4
80 1,200 1,500 1,140,000 1,320,000 101518907 22232CAME4
290
104 1,000 1,300 1,370,000 1,770,000 101369107 23232CAME4
340 114 1,100 1,300 1,700,000 1,890,000 110746726 22332CAMW507
230 45 1,400 1,700 440,000 660,000 101518895 23934CAME4
67 1,200 1,600 795,000 1,090,000 101520361 23034CAME4
260
90 1,000 1,300 1,030,000 1,520,000 113426808 24034CAME4
170 88 1,000 1,300 1,180,000 1,570,000 113426738 23134CAME4
280
109 1,000 1,300 1,280,000 1,770,000 113426880 24134CAME4
310 86 1,100 1,400 1,240,000 1,500,000 101544764 22234CAME4
360 120 1,000 1,200 935,000 1,268,000 112226698 22334CAMW507
74 1,200 1,400 935,000 1,268,000 110746789 23036CAMW507
280
100 950 1,200 1,210,000 1,750,000 113426814 24036CAME4
96 900 1,200 1,320,000 1,760,000 101518051 23136CAME4
180 300
118 900 1,200 1,490,000 2,040,000 101102407 24136CAME4
320 86 1,100 1,300 1,280,000 1,535,000 113426676 22236CAMW507
380 126 950 1,200 2,170,000 2,335,000 113425970 22336CAMW507
260 52 1,200 1,500 575,000 875,000 101104256 23938CAME4
75 1,100 1,400 970,000 1,350,000 101102243 23038CAME4
290
100 900 1,200 1,220,000 1,840,000 101518562 24038CAME4
190
104 850 1,100 1,480,000 2,020,000 113426745 23138CAME4
320
128 850 1,100 1,710,000 2,330,000 113426392 24138CAME4
340 92 1,000 1,200 1,420,000 1,735,000 110746677 22238CAMW507
280 60 1,100 1,400 710,000 1,060,000 101518141 23940CAME4
310 82 1,000 1,300 1,180,000 1,712,000 110746796 23040CAMW507
112 800 2,000 1,700,000 2,330,000 113426084 23140CAMW507
200 340
140 800 1,000 1,960,000 2,660,000 110747051 24140CAME4
360 98 950 1,200 1,620,000 2,010,000 104443730 22240CAMP55W507
420 138 850 1,000 2,500,000 2,990,000 100766109 22340CAMW507
90 950 1,200 1,360,000 1,979,000 110746800 23044CAMW507
340
118 750 1,000 1,640,000 2,490,000 113426831 24044CAME4
220 370 120 710 950 1,960,000 2,710,000 113426753 23144CAME4
400 108 850 1,000 1,960,000 2,424,000 110746684 22244CAMW507
460 145 750 950 2,940,000 3,400,000 100766113 22344CAME4
92 850 1,100 1,450,000 2,135,000 110746802 23048CAMW507
360
118 710 950 1,730,000 2,730,000 100766268 24048CAME4
240
400 160 670 850 2,660,000 3,800,000 101372574 24148CAME4
440 120 750 950 2,160,000 2,891,000 100766047 22248CAMW507
360 75 850 1,000 1,170,000 1,870,000 101370531 23952CAME4
400 104 800 950 1,652,000 2,580,000 101518468 23052CAMP55W507
260 440 180 600 800 3,200,000 4,700,000 110747057 24152CAME4
480 130 670 850 2,518,000 3,380,000 101368765 22252CAMW507
540 165 630 800 3,900,000 4,600,000 101368853 22352CAMW507
106 710 900 1,930,000 2,950,000 104445022 23056CAMP55W507
420
140 600 800 2,350,000 3,800,000 100766269 24056CAME4
280 460 180 560 750 3,300,000 5,000,000 100766286 24156CAME4
500 130 630 800 2,850,000 3,650,000 113425941 22256CAME4
580 175 560 710 4,350,000 5,150,000 110746741 22356CAME4
300 500 200 500 670 3,900,000 5,800,000 101375812 24160CAME4
480 160 500 670 3,050,000 5,050,000 100766272 24064CAME4
320
540 218 480 600 4,400,000 6,650,000 101102413 24164CAME4
520 180 480 600 2,920,000 6,050,000 101369955 24068CAME4
340
580 243 430 560 5,300,000 7,900,000 101378315 24168CAME4
192 400 530 4,800,000 7,100,000 101518228 23172CAMP55W507
360 600
243 400 530 5,250,000 8,000,000 101394765 24172CAME4
520 106 530 670 2,340,000 4,100,000 101418712 23976CAME4
380
560 180 430 560 3,850,000 6,600,000 105543376 24076CAME4
400 600 200 400 500 4,500,000 7,600,000 113426343 24080CAME4
460 680 163 400 500 3,985,000 7,072,000 112820835 23092CAMP55W507
316 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (rpm) (N) (N) Item No. Mfr. No.
80 23 6,700 7,100 113,000 99,500 101102128 22208EAE4
40 23 6,000 7,500 118,000 111,000 101102091 21308EAE4
90
33 5,300 6,700 170,000 153,000 101102178 22308EAE4
85 23 6,000 7,500 118,000 111,000 101102132 22209EAE4
45 25 5,000 6,300 149,000 144,000 101102095 21309EAE4
100
36 4,500 5,600 107,000 195,000 100766050 22309EAE4
90 23 5,600 7,100 124,000 119,000 100765993 22210EAE4
50 27 4,500 5,600 178,000 174,000 101102099 21310EAE4
110
40 4,300 5,300 246,000 234,000 100766052 22310EAE4
100 25 5,300 6,700 149,000 144,000 101102137 22211EAE4
55 29 4,500 5,600 178,000 174,000 101102102 21311EAE4
120
43 3,800 4,800 292,000 292,000 100766055 22311EAE4
110 28 4,800 6,000 178,000 174,000 101102139 22212EAE4
60 31 3,800 4,800 238,000 244,000 101102106 21312EAE4
130
46 3,600 4,500 340,000 340,000 100766058 22312EAE4
120 31 4,300 5,300 221,000 230,000 101102142 22213EAE4
65 33 3,600 4,500 264,000 275,000 101102109 21313EAE4
140
48 3,200 4,000 375,000 380,000 101102188 22313EAE4
125 31 4,000 5,300 225,000 232,000 101102144 22214EAE4
70 35 3,200 4,000 310,000 325,000 101102113 21314EAE4
150
51 3,000 3,800 425,000 435,000 101102191 22314EAE4
130 31 4,000 5,000 238,000 244,000 101102148 22215EAE4
75 37 3,200 4,000 310,000 325,000 101102115 21315EAE4
160
55 2,800 3,600 485,000 505,000 101102193 22315EAE4
140 33 3,600 4,500 264,000 275,000 101102150 22216EAE4
80 39 3,000 3,800 355,000 375,000 101102118 21316EAE4
170
58 2,600 3,400 540,000 565,000 100766067 22316EAE4
150 36 3,400 4,300 310,000 325,000 101102153 22217EAE4
85 41 3,000 4,000 360,000 395,000 101102122 21317EAE4
180
60 2,400 3,200 600,000 630,000 100766070 22317EAE4
160 40 3,200 4,000 360,000 395,000 101102155 22218EAE4
90
190 43 2,800 3,600 415,000 450,000 101102124 21318EAE4
95 170 43 3,000 3,800 415,000 450,000 101102157 22219EAE4
100 180 46 2,800 3,600 455,000 490,000 100766009 22220EAE4
170 45 2,000 2,400 294,000 467,000 113426700 23022CDW507
110
200 53 2,600 3,600 605,000 645,000 110746641 22222EAW507
180 46 1,800 2,200 395,000 525,000 110746765 23024CDW507
120
215 58 2,400 3,000 685,000 765,000 110969189 22224EAW507
200 52 1,700 2,000 500,000 658,000 110746772 23026CDW507
130
230 64 2,200 2,600 820,000 940,000 110969191 22226EAW507
140 250 68 1,400 1,700 835,000 930,000 110746649 22228CDW507
53 1,300 1,600 955,000 1,121,000 111105541 23028CDW507
150 270
73 1,300 1,600 955,000 1,121,000 110746655 22230CDW507
240 60 1,300 1,700 675,000 956,000 110746783 23032CDW507
160
290 80 1,200 1,500 1,140,000 1,321,000 100766029 22232CDE4
170 310 86 1,100 1,400 1,240,000 1,490,000 110746668 22234CDW507
180 280 74 1,200 1,400 935,000 1,268,000 110746791 23036CDW507
I.D. O.D. Width Limiting Speed Grease Limiting Speed Oil Dynamic Load Rating Static Load Rating
(mm) (mm) (mm) (rpm) (rpm) (N) (N) Item No. Mfr. No.
50 90 23 4,000 5,000 82,000 93,000 101518909 22210CAME4C3
60 110 28 3,200 4,000 127,000 154,000 101522295 22212CAME4C3
300 460 118 670 850 2,217,000 3,692,000 101518467 23060CAMC3P55W507
320 480 121 630 800 2,264,000 3,848,000 101521836 23064CAMC3P55W507
340 520 133 560 710 2,633,000 4,381,000 103735649 23068CAMC3P55W507
380 560 135 530 630 2,887,000 5,115,000 112824035 23076CAMC3P55W507
400 600 148 480 600 3,430,000 5,916,000 104444213 23080CAMC3P55W507
420 620 150 450 560 2,910,000 5,850,000 100766158 23084CAME4C3
440 650 157 430 530 3,638,000 6,361,000 110998172 23088CAMC3P55W507
480 700 165 400 480 3,985,000 7,962,000 104438270 23096CAMC3P55W507
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 317
Bearings
Continued from previous page.
318 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
The EC design contains improvements in guiding surfaces of flanges and roller ends, which means that EC bearings have a high axial load-carrying capacity.
Features:
• Improved roller-end-to-flange contact
• Increased capacity
Brass/Bronze
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 319
Bearings
Continued from previous page.
320 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Super Precision Cylindrical Roller Bearing
Super Precision Cylindrical Roller Bearings are designed to specifically handle large radial loads in high speed applications.
They are available in a variety of designs, including double row and single row options, to suit various applications. In addition,
a standard lube groove and hole feature is available along with tapered and nontapered bores. When combined with Super
Precision Angular Contact Thrust Bearings, the Super Precision Cylindrical Roller Bearings meet the high rigidity requirements
of many machine tool spindle applications.
Features:
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment Single Row Double Row
• Use with machine tool spindles for float and high radial loadings
• Designed for exact positioning of the ball screw in a variety of machine tools
Rubber
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 321
Bearings
Features: Applications:
• Self-aligning, robust design • Fans
• Very high load carrying capacity • Papermaking machines
• Reduced friction and minimum heat generation • Gearboxes
• Excellent performance at high temperatures • Crushers
• In accordance with ISO 15-1981 • Vibrating screens
Round Bore Tapered Bore
Round Bore – Greater Than Normal Clearance
Dynamic Static
Limiting Reference Load Load
I.D. O.D. Width Speed Speed Rating Rating
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Cage Material Item No. Mfr. No.
30 62 20 14,000 10,000 14,388 13,489 Steel 100762490 22206 E/C3
35 72 23 12,000 19,000 19,446 19,109 Steel 100762492 22207 E/C3
80 23 11,000 8,000 22,900 22,000 Steel 100762495 22208 E/C3
40
90 33 8,000 6,000 33,700 30,900 Steel 100762606 22308 E/C3
55 100 25 8,500 6,300 30,100 30,800 Steel 100762507 22211E/C3
110 28 7,500 5,600 36,700 38,900 Steel 100762512 22212 E/C3
60
130 46 5,300 4,000 69,700 75,300 Steel 100762627 22312 E/C3
65 140 48 5,000 3,800 76,500 81,000 Steel 100762632 22313E/C3
125 31 6,700 5,000 46,800 51,300 Steel 100762520 22214E/C3
70
150 51 4,500 3,200 89,925 96,670 Steel 100762638 22314 E/C3
130 31 6,300 4,800 47,700 54,000 Steel 100762524 22215 E/C3
75
160 55 4,300 3,000 98,915 106,785 Steel 100762642 22315 E/C3
80 140 33 6,000 4,300 53,100 60,700 Steel 100762529 22216 E/C3
85 150 36 5,600 3,800 64,070 73,060 Steel 100762534 22217 E/C3
160 40 5,300 3,400 73,060 84,300 Steel 100762538 22218 E/C3
90
190 64 3,600 2,400 137,133 156,242 Steel 100762656 22318 E/C3
95 170 43 4,800 3,200 85,427 101,164 Steel 100762542 22219 E/C3
180 46 4,500 3,000 95,543 110,157 Steel 100762546 22220 E/C3
100
215 73 3,200 2,200 183,220 213,570 Steel 100762665 22320 E/C3
110 200 53 4,300 2,800 125,890 143,878 Steel 100762552 22222 E/C3
120 215 58 3,800 2,600 141,629 171,979 Steel 100762558 22224 E/C3
260 480 130 1,600 1,200 517,000 799,000 Brass/Bronze 101484315 22252 CAC/C3W33
322 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 323
Bearings
Continued from previous page.
Features: Applications:
• Common configuration with inner and outer rings • Pulp and paper mills
• Matching spherical surfaces enable bearings to compensate for modest misalignment • Construction and mining equipment
between a rotating shaft and the bearing housing • Metal mills
• Two rows of rolling elements • Screens
• High radial capacity • Pavement profilers
• Accommodates combinations of radial and axial loads • Building block machines
• Uses different internal configurations and cages for specific operating conditions • Finishing mills
• Greater resistance to shock and impact loads – heavy-duty, machined bronze cage • Saw frames
extends the life of the bearing and increases productivity of the equipment • Bin vibrators
• Cooler running temperatures – finger-style cage design with drilled holes in pockets • Vibrating feeders
promotes optimal lubrication flow; better lubrication allows for a cooler-running bearing, • Vibrating compactors
which extends life and increases productivity
• Longer life – contour surface designs of matching parts and components allow for the
load to be distributed over a larger area, reducing operating temperature, increasing life
and maximizing productivity
• Misalignment capability – self-aligning, spherical roller bearing design compensates for
misalignments while maintaining the bearing’s full load-carrying capacity, ensuring longer
service life
324 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Features:
• Longer service life
• Reduced operating costs
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• For heavy-duty applications
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 325
Bearings
Continued from previous page.
Center
Shaft Line to Bolt Hole Housing Housing
Dia. Base Range Base Height Base Width Length Height Adapter
(in) (in) (in) (in) (in) (in) (in) Assembly Item No. Mfr. No.
2 3/16 3 8 1/8 to 9 1/2 1 3 1/8 11 5 21/32 SNW-13 100731447 SAF 513
2 7/16 3 1/4 8 5/8 to 9 5/8 1 1/8 3 1/8 11 1/4 6 1/8 SNW-15 100731451 SAF 515
2 15/16 3 3/4 9 7/8 to 11 1 1/4 3 1/2 13 7 1/8 SNW-17 100731465 SAF 517
3 7/16 4 1/2 11 5/8 to 13 1/8 1 3/4 4 3/8 15 1/4 8 15/32 SNW-20 100731478 SAF520
Center
Shaft Line to Bolt Hole Housing Housing
Dia. Base Range Base Height Base Width Length Height Adapter
(in) (in) (in) (in) (in) (in) (in) Assembly Item No. Mfr. No.
2 15/16 3 3/4 9 7/8 to 11 1 1/4 3 1/2 13 7 1/8 SNW-17 100731469 FSAF 517
3 7/16 4 1/2 11 5/8 to 13 1/8 1 3/4 4 3/8 15 1/4 8 15/32 SNW-20 100731480 FSAF 520
3 15/16 4 15/16 12 5/8 to 14 1/2 2 4 3/4 16 1/2 9 11/32 SNW-22 100731486 SAF 522
4 5/16
4 3/8
6 14 5/8 to 16 2 3/8 5 1/4 18 3/8 11 5/16 SNW-26 100731496 SAF 526
4 7/16
4 1/2
4 15/16 6 16 to 17 1/8 2 3/8 5 7/8 20 1/8 11 3/4 SNW-28 101169662 SAF 528
326 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
SNW Series Adapter Sleeve
The individual locknut (ex.: N10 or AN15) and lock washer (ex.: W10) components
are also available from Standard Locknut.
Shaft Threads
Dia. Lock per
(in) Lock Nut Washer Inch Bearing Series Item No. Mfr. No.
1 N07 W07 18 12, 13, 222 101552409 SNW07X1
1 7/16 N09 W09 18 23, 223 101532152 SNW109X1 7/16
1 1/2 N09 W09 18 23, 223 101528805 SNW109X1 1/2
1 5/8 N10 W10 18 12, 13, 213, 222 101553949 SNW10X1 5/8
12, 13, 213, 222 101524322 SNW10X1 11/16
W10 18
1 11/16 N10 23, 223 101559545 SNW110X1 11/16
W11 18 12, 13, 213, 222 101387186 SNW11X1 11/16
12, 13, 213, 222 101554616 SNW10X1 3/4
W10 18
1 3/4 N10 23, 223 101540201 SNW110X1 3/4
W11 18 12, 13, 213, 222 104721804 SNW11X1 3/4
12, 13, 213, 222 101548819 SNW11X1 13/16
1 13/16 N11 W11 18
23, 223 104634350 SNW111X1 13/16
12, 13, 213, 222 101553950 SNW11X1 7/8
1 7/8 N11 W11 18
23, 223 101532145 SNW111X1 7/8
12, 13, 213, 222 101522640 SNW11X1 15/16
1 15/16 N11 W11 18
23, 223 101532146 SNW111X1 15/16
12, 13, 213, 222 101556727 SNW11X2
N11 W11 18
2 23, 223 101554754 SNW111X2
N13 W13 18 12, 13, 222 104722255 SNW13X2
2 1/16 N12 W12 18 23, 223 101523613 SNW112X2 1/16
2 1/8 N13 W13 18 12, 13, 222 101530922 SNW13X2 1/8
12, 13, 222 101545123 SNW13X2 3/16
2 3/16 N13 W13 18
23, 223 101532734 SNW113X2 3/16
12, 13, 222 101548820 SNW13X2 1/4
2 1/4 N13 W13 18
23, 223 101559546 SNW113X2 1/4
12, 13, 222 101574000 SNW15X2 3/8
2 3/8 AN15 W15 12
23, 223 104721165 SNW115X2 3/8
12, 13, 222 101524323 SNW15X2 7/16
2 7/16 AN15 W15 12
23, 223 101559554 SNW115X2 7/16
12, 13, 222 101540199 SNW15X2 1/2
2 1/2 AN15 W15 12
23, 223 101594054 SNW115X2 1/2
AN15 W15 12 12, 13, 222 101591008 SNW15X2 5/8
2 5/8
AN16 W16 12 23, 223 103142788 SNW116X2 5/8
12, 13, 222 101545124 SNW16X2 11/16
2 11/16 AN16 W16 12
23, 223 101528806 SNW116X2 11/16
12, 13, 222 101562505 SNW16X2 3/4
2 3/4 AN16 W16 12
23, 223 101594055 SNW116X2 3/4
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 327
Bearings
Continued from previous page.
Shaft Threads
Dia. Lock per
(in) Lock Nut Washer Inch Bearing Series Item No. Mfr. No.
12, 13, 222 101523179 SNW17X2 15/16
2 15/16 AN17 W17 12
23, 223 101556731 SNW117X2 15/16
12, 13, 222 101528802 SNW17X3
3 AN17 W17 12
23, 223 101553952 SNW117X3
12, 13, 222 101521092 SNW18X3 3/16
3 3/16 AN18 W18 12
23, 223, 232 101562510 SNW118X3 3/16
12, 13, 222 101559544 SNW18X3 1/4
3 1/4 AN18 W18 12
23, 223, 232 101561326 SNW118X3 1/4
12, 13, 222 101536872 SNW20X3 7/16
3 7/16 AN20 W20 12
223, 232 101540202 SNW120X3 7/16
12, 13, 222 101540200 SNW20X3 1/2
3 1/2 AN20 W20 12
223, 232 101532147 SNW120X3 1/2
12, 13, 222 101554618 SNW22X3 11/16
3 11/16 AN22 W22 12
223, 232 104721806 SNW122X3 11/16
3 7/8 AN22 W22 12 223, 232 104567657 SNW122X3 7/8
12, 13, 222 101550883 SNW22X3 15/16
3 15/16 AN22 W22 12
223, 232 101553126 SNW122X3 15/16
12, 13, 222 101554617 SNW22X4
4 AN22 W22 12
223, 232 101532148 SNW122X4
222, 231 101548830 SNW24X4 3/16
4 3/16 AN24 W24 12
223, 232 101574001 SNW124X4 3/16
222, 231 104721597 SNW24X4 1/4
4 1/4 AN24 W24 12
223, 232 104722918 SNW124X4 1/4
222, 231 101535633 SNW26X4 7/16
4 7/16 AN26 W26 12
223, 232 101553953 SNW126X4 7/16
222, 231 101556728 SNW26X4 1/2
4 1/2 AN26 W26 12
223, 232 104721805 SNW126X4 1/2
4 7/8 AN28 W28 12 222, 231 101548829 SNW28X4 7/8
222, 231 101545122 SNW28X4 15/16
4 15/16 AN28 W28 12
223, 232 101553954 SNW128X4 15/16
222, 231 101548821 SNW28X5
5 AN28 W28 12
223, 232 101554370 SNW128X5
222, 231 101554369 SNW32X5 7/16
5 7/16 AN32 W32 8
223, 232 101554380 SNW132X5 7/16
222, 231 101556729 SNW32X5 1/2
5 1/2 AN32 W32 8
223, 232 104136343 SNW132X5 1/2
5 3/4 AN32 W32 8 222, 231 101554753 SNW32X5 3/4
222, 231 101528804 SNW34X5 15/16
5 15/16 AN34 W34 8
223, 232 101554371 SNW134X5 15/16
6 AN34 W34 8 223, 232 101561327 SNW134X6
328 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 329
Bearings
Shaker Screen Spherical Roller Bearing
Features: Applications:
• Common configuration with inner and outer rings • Construction and mining equipment
• Matching spherical surfaces enable bearings to compensate for modest • Screens
misalignment between a rotating shaft and the bearing housing • Building block machines
• Two rows of rolling elements • Bin vibrators
• High radial capacity • Vibrating feeders
• Accommodates combinations of radial and axial loads • Vibrating compactors
• Uses different internal configurations and cages for specific operating conditions
• Greater resistance to shock and impact loads – heavy-duty, machined bronze
cage extends the life of the bearing and increases productivity of the equipment
• Cooler running temperatures – finger-style cage design with drilled holes in
pockets promotes optimal lubrication flow; better lubrication allows for a
cooler-running bearing, which extends life and increases productivity
• Longer life – contour surface designs of matching parts and components allow
for the load to be distributed over a larger area, reducing operating temperature,
increasing life and maximizing productivity
• Misalignment capability – self-aligning, spherical roller bearing design
compensates for misalignments while maintaining the bearing’s full load-carrying
capacity, ensuring longer service life
Features: Applications:
• Self-aligning, robust design • Fans
• Very high load carrying capacity • Papermaking machines
• Reduced friction and minimum heat generation • Gearboxes
• Excellent performance at high temperatures • Crushers
• In accordance with ISO 15-1981 • Vibrating screens
I.D. O.D. Width Limiting Speed Reference Speed Dynamic Load Rating Static Load Rating Normal Clearance
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
55 120 43 5,600 4,300 44,700 52,100 101173178 22311 E/VA405
110 240 80 2,800 2,000 163,000 217,000 100762675 452322 M2/W502
I.D. O.D. Width Limiting Speed Reference Speed Dynamic Load Rating Static Load Rating Normal Clearance
(mm) (mm) (mm) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
60 130 46 5,300 4,000 69,700 75,300 101169459 22312 E/VA405
65 140 48 5,000 3,800 58,000 68,500 101169461 22313 E/VA405
80 170 58 4,000 3,000 84,000 105,000 101173193 22316 EJA/VA405
90 190 64 3,600 2,600 137,133 156,242 101169464 22318 EJA/VA405
100 215 73 3,000 2,400 183,200 213,600 100762666 22320 EJA/VA405
330 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Cast Bronze Sleeve Bearing
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 331
Bearings
Continued from previous page.
332 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 333
Bearings
Continued from previous page.
334 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
4
4 1/2
4
6
101531570
102589482
SS-128144-64
SS-128144-96
Get access to:
4 1/2
4.628
5 1/4
4
5
102124078
102157107
SS-128148-64
SS-144168-80
• Order History
5 5 3/4 2 102208478 SS-160184-32 • List Management
• Auto-Replenishment
• My Applied® Catalog
• Frequent & Recent Purchases
• Multiple Level
Purchase Approvals
Check out
Applied.com/register
today!
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 335
Bearings
BUNTING
BEARINGS, BUSHINGS, BRONZE BARS,
POWDERED METAL AND
Cast Bronze Sleeve Bearing
CUSTOM-MACHINED PARTS
Features:
• Machined from continuous-cast C93200 (SAE 660) bronze for superior quality and performance
• Free from porosity and hard particle inclusions commonly found in other cast processes
• Provides off-the-shelf service for most applications
• May be easily resized, oil grooved or graphited to meet special requirements
• Product contains 90% pre-consumer recycled content
Material: Bronze – C93200 (SAE 660)
No Flange Max. Temperature: 450 °F
336 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Dry bearing material with good wear and friction
• Performance over a wide range of loads, speeds and temperature conditions
• DU® also performs well with lubrication Features:
• Available from stock in a wide range of standard sizes • DP4® anti-friction bushings offer good wear and low friction
• Also available in RoHS compliant materials performance over a wide range of loads, speeds and temperatures in
• Available in other materials upon request dry running conditions
Material: PTFE Based Metal Polymer • Very good performance in lubricated applications
Temperature Range: -328 °F to 536 °F • Good performance in greased applications
• Suitable for linear, oscillating and rotating movements
I.D. O.D. Length • Lead-free material compliant to EVL and RoHS specifications
(in) (in) (in) Item No. Mfr. No. • Compliant with the European Union’s End of LifeVehicles (ELV)
1/4 101957775 04DU04 directive 2005/53/EC and RoHS regulation directive 2002/95/EC
1/4 5/16
3/8 101970675 04DU06
3/8 101963028 05DU06
5/16 3/8
1/2 101958824 05DU08
1/4 101984837 06DU04
3/8 101969465 06DU06
Material: PTFE Based Metal Polymer
3/8 15/32 1/2 101966293 06DU08 Temperature Range: -200 °F to 280 °F
5/8 101984831 06DU10
3/4 101963357 06DU12 Min. Max.
1/4 101963034 08DU04 I.D. O.D. O.D. Length
3/8 101969104 08DU06 (in) (in) (in) (in) Item No. Mfr. No.
1/2 101970681 08DU08 1/4 101415838 04DP404
1/2 1/2 1/4 0.3122 0.3128
5/8 101983834 08DU10 3/8 101711807 04DP406
3/4 101988627 08DU12 3/8 102757502 05DP406
5/16 0.3747 0.3753
7/8 101969470 08DU14 1/2 102757503 05DP408
1/4 101984073 10DU04 1/4 102930040 06DP404
3/8 101733992 10DU06 3/8 106353596 06DP406
3/8 0.4684 0.4691
1/2 102013633 10DU08 1/2 102153451 06DP408
5/8 23/32 5/8 101976102 10DU10 5/8 102756457 06DP410
3/4 101957792 10DU12 1/4 102757506 08DP404
7/8 101963361 10DU14 3/8 103173450 08DP406
1 101988332 10DU16 1/2 0.5934 0.5941 1/2 102754608 08DP408
1/4 101984248 12DU04 5/8 102754609 08DP410
3/8 101963679 12DU06 7/8 102757877 08DP414
1/2 102013634 12DU08 1/4 102756868 10DP404
3/4 7/8
5/8 101984374 12DU10 1/2 102756765 10DP408
0.7184 0.7192
3/4 101966305 12DU12 5/8 5/8 101472194 10DP410
1 101975354 12DU16 1 110141179 16DP420
3/4 102013638 14DU12 0.7192 0.7192 1 112822990 10DP416
7/8 1
1 101984080 14DU16 3/8 102062220 12DP406
1/2 101969570 16DU08 1/2 106026379 12DP408
5/8 101976131 16DU10 3/4 0.8747 0.8755 5/8 102054442 12DP410
3/4 101984081 16DU12 3/4 101637504 12DP412
1 1 1/8
1 101983579 16DU16 1 102756382 12DP416
1 1/4 101988789 16DU20 0.7184 0.7192 3/4 105431647 14DP412
7/8
1 1/2 101963368 16DU24 0.9997 1.0005 1 101658602 14DP416
3/4 101983845 18DU12 3/4 102758709 16DP412
1 1/8 1 9/32
1 101984256 18DU16 1 1.2470 1.1255 1 101674051 16DP416
3/4 101966313 20DU12 1 1/2 102759539 16DP424
1 101970698 20DU16 0.7184 0.7192 1 106477081 18DP416
1 1/4 1 13/32 1 1/8
1 1/4 101975360 20DU20 1.2808 1.2818 3/4 102932002 18DP412
1 3/4 101970700 20DU28 3/4 106075069 20DP412
1 3/8 1 17/32 1 101976122 22DU16 1 102758050 20DP416
1 1/4 1.4058 1.4068
1/2 101970703 24DU08 1 1/4 106074194 20DP420
1 101963376 24DU16 1 3/4 102755895 20DP428
1 1/2 1 21/32
1 1/4 101957803 24DU20 1 3/8 1.5308 1.5318 1 102786539 22DP416
1 1/2 101963691 24DU24 1 102755868 24DP416
1 1/2 1.6558 1.6568
1 101984810 28DU16 1 1/2 102756767 24DP424
1 3/4 1 15/16
2 101963695 28DU32 1 101639241 28DP416
1 3/4 1.9371 1.9381
1 7/8 2.0633 3/4 101970708 30DU12 2 106076264 28DP432
1 101988781 32DU16 0.7184 0.7192 1 3/4 112822991 32DP428
2 2.1880 1 1/2 101969586 32DU24 2 1 106072369 32DP416
2.1871 2.1883
1 3/4 102014185 32DU28 1 1/2 102757509 32DP424
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 337
Bearings
Features:
• High load capacity
• Excellent shock resistance
• Excellent contamination resistance
• Excellent misalignment resistance
• Very good friction and wear properties
• Good chemical resistance
• Other sizes and configurations available upon request
• Also available in RoHS compliant materials
• Available in other materials upon request
Designed for extra light-duty applications to provide the advantages of ball bearings at a low cost. The unit consists of a two-piece, separable, zinc-plated steel housing with
spherical bearing seat. This allows the spherically ground bearing initial self-alignment in all directions.
Features: Applications:
• Extended inner-ring-type bearing • Agriculture
• Positive contact, land riding seals • Fans and blowers
• Self-locking collar • Food processing
• Permanently lubricated • Conveyors
Outer Shaft Center Line Bolt Hole Base Base Base Housing Non-Relubricatable
Ring Dia. to Base Range Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 7/8 2 3/16 to 3 3/16 3 5/8 0.120 1 1 3/4 RA008RRB 101020047 PB1/2
203
5/8 7/8 2 3/16 to 3 3/16 3 5/8 0.120 1 1 3/4 RA010RRB 101020049 PB5/8
204 3/4 1 2 1/2 to 3 1/2 4 1/8 0.120 1 2 1/16 RA012RRB 101020048 PB3/4
7/8 1 1/8 2 13/16 to 3 15/16 4 1/2 0.160 1 1/8 2 7/32 RA014RRB 101020050 PB7/8
205
1 1 1/8 2 13/16 to 3 15/16 4 1/2 0.160 1 1/8 2 7/32 RA100RRB 101020044 PB1
1 3/16 1 5/16 3 to 4 1/8 4 7/8 0.160 1 1/4 2 5/8 RA103RRB 101020046 PB1 3/16
206
1 1/4 1 5/16 3 to 4 1/8 4 7/8 0.160 1 1/4 2 5/8 RA103RRB2 101020045 PB1 1/4Sa
a
Smaller housing.
338 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
RPB Series Stamped Steel 2-Bolt Ball Bearing Pillow Block
Designed for extra light-duty applications to provide the advantages of ball bearings at a low cost. The unit consists of a two-piece, separable, zinc-plated steel housing with
spherical bearing seat. This allows the spherically ground bearing initial self-alignment in all directions.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Shaft Center Line Bolt Hole Base Base Base Housing Non-Relubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 1 2 1/2 to 3 1/2 4 1/8 0.120 1 2 1/16 RA008RRB 101020213 RPB1/2
5/8 1 2 1/2 to 3 1/2 4 1/8 0.120 1 2 7/32 RA010RRB 102171884 RPB5/8
3/4 1 1/8 2 13/16 to 3 5/16 4 1/2 0.160 1 1/8 2 7/32 RA012RRB 101020214 RPB3/4
1 1 5/16 3 to 4 1/8 4 7/8 0.145 1 1/4 2 5/8 RA100RRB 101020212 RPB1
1 3/16 1 5/16 3 to 4 1/8 4 7/8 0.145 1 1/4 2 5/8 RAL103NPPB 101019989 LRPB1 3/16
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
203 5/8 1 3/16 3 5/8 4 7/8 0.104 1 2 11/32 RA010RRB 101020055 PBS5/8
204 3/4 1 5/16 3 13/16 5 0.119 1 2 11/16 RA012RRB 101020054 PBS3/4
205 1 1 7/16 3 3/4 5 1/4 0.134 1 2 27/32 RA100RRB 101020051 PBS1
206 1 1/4 1 11/16 4 11/16 6 1/4 0.134 1 3/16 3 11/32 RA103RRB2 101020053 PBS1 1/4S
207 1 1/4 1 7/8 5 6 1/2 0.149 1 3/8 3 23/32 RA103RRB2 101020052 PBS1 1/4
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 339
Bearings
ER Industrial Series Wide Inner Ring Ball Bearing
Features:
• Provides low-friction qualities characteristic of high-grade bearings
• Extended inner ring type with self-locking collar
• Provides improved protection against harmful contaminants and effectively
retains the lubricant under severe operating conditions
• Bearings are factory prelubricated
• Cylindrical O.D.
Features: Applications:
• Inner and outer rings are precision hardened and honed for wear resistance and • Air handling
quiet operation • Unit handling
• DualGuard sealing system includes a mechanically retained, land riding, • Food and beverage
single lip contact seal plus a patented rubberized flinger for enhanced protection • Forest products
against contaminants • Paper
• Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which • Automotive
allows higher operating temperatures and greater flexibility with added strength • Chemical
• Anti-rotation pin makes insert replacement easier with no need to replace grease • Packaging and processing
fittings or location pins
• 65° setscrew spacing offers an optimum balance between locking force
and inner ring stress
• Grade 10 balls for quieter operation and less vibration
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Range Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 1 1/16 3 1/4 to 4 1/16 5 15/32 1 7/32 2 5/32 INSSC008 100733437 P2BSC008
203
5/8 1 1/16 3 1/4 to 4 1/16 5 15/32 1 7/32 2 5/32 INSSC010 100733438 P2BSC010
206 1 1/4 1 5/8 4 1/4 to 5 6 1/4 11/16 1 3/4 3 1/4 INSSC104S 100939319 P2BSC104S
214 2 11/16 3 7 1/2 to 8 1/2 10 3/4 15/16 2 11/16 6 3/32 INSSC211 100733470 P2BSC211
340 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
U200 Series Standard-Duty Pillow Block Bearing
Features:
• Cast iron housing
• Standard backing height
• Alignable
• Spring locking setscrew mount
• Relubricatable
• Wide inner ring for increased shaft stability
• Corrosion-resistant powder coating
Bearing Design: Non-Expansion
Inch Housing Material: Cast Iron
2 Bolt Holes Locking Device: Setscrew Locking Collar
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Spacing Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 1 3/16 3 1/2 4 5/8 1/2 1 5/16 2 11/32 UG2B08NL 100736261 P3U2B08N
5/8 1 3/16 3 1/2 4 5/8 1/2 1 5/16 2 11/32 UG210NL 102082379 P3U210N
3/4 1 5/16 3 7/8 5 1/8 1/2 1 7/16 2 19/32 UG212NL 100736263 P3U212N
7/8 1 7/16 4 5 3/8 9/16 1 21/64 2 7/8 UG214NL 100736264 P3U214N
15/16 1 7/16 4 5 3/8 9/16 1 21/64 2 7/8 UG215NL 100736265 P3U215N
1 1 7/16 4 5 3/8 9/16 1 21/64 2 7/8 UG216NL 102094688 P3U216N
1 1/8 1 11/16 4 5/8 6 5/16 11/16 1 5/8 3 5/16 UG218NL 100736267 P3U218N
1 3/16 1 11/16 4 5/8 6 5/16 11/16 1 5/8 3 5/16 UG219NL 100736268 P3U219N
1 1/4 1 7/8 4 15/16 6 3/8 13/16 1 3/4 3 11/16 UG220NL 100736269 P3U220N
1 3/8 1 7/8 4 15/16 6 3/8 13/16 1 3/4 3 11/16 UG222NL 100736270 P3U222N
1 7/16 1 7/8 4 15/16 6 3/8 13/16 1 3/4 3 11/16 UG223NL 102080264 P3U223N
1 1/2 2 5 3/8 7 1/16 13/16 1 7/8 4 UG224NL 100736273 P3U224N
1 5/8 2 1/8 5 5/8 7 1/4 13/16 2 4 5/16 UG226NL 100736274 P3U226N
1 11/16 2 1/8 5 5/8 7 1/4 13/16 2 4 5/16 UG227NL 102096870 P3U227N
1 3/4 2 1/8 5 5/8 7 1/4 13/16 2 4 5/16 UG228NL 100736276 P3U228N
1 15/16 2 1/4 6 3/16 7 7/8 7/8 2 1/8 4 1/2 UG231NL 102080265 P3U231N
2 2 1/2 6 3/4 9 1/16 1 2 5/16 5 UG232NL 100000213 P3U232N
2 3/16 2 1/2 6 3/4 9 1/16 1 2 5/16 5 UG235NL 102094690 P3U235N
2 7/16 2 11/16 7 1/2 9 1/2 1 1/8 2 3/8 5 3/8 UG239NL 102094589 P3U239N
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 341
Bearings
NP-T Series Standard-Duty Pillow Block
Most widely used, normal-duty pillow block with high base-to-shaft centerline dimensions.
Features:
• Skwezloc® bearing-to-shaft locking system
• Patented, felt-lined flinger seal
• Unique metal land riding retainer
• Zone-hardened inner race
• Permanent metal nameplate
• Black oxide, corrosion-resistant race
• Differentiated lubrication and sealing system
• Superior shaft stability
• 52100 high quality bearing steel
• Exclusive locking pin and dimple system
• Extra wide outer race
• Extra wide inner race
• Solid base cast iron housing Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Skwezloc® Collar
2 Bolt Holes Insert Type: Steel Insert
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
3/4 1 5/16 3 3/8 to 4 1/8 5 1/2 1 1/2 2 9/16 101179507 NP-12T
1 1 7/16 3 7/8 to 4 3/8 5 1/2 1/2 1 1/2 2 13/16 101179518 NP-16T
1 1/8 1 11/16 4 7/16 to 5 1/16 6 1/2 9/16 1 7/8 3 3/8 101179523 NP-18T
1 3/16 1 11/16 4 7/16 to 5 1/16 6 1/2 9/16 1 7/8 3 3/8 101179526 NP-19T
1 1/4 1 7/8 4 11/16 to 5 5/16 6 9/16 5/8 1 7/8 3 3/4 101179533 NP-20T
1 7/16 1 7/8 4 11/16 to 5 5/16 6 9/16 5/8 1 7/8 3 3/4 101179540 NP-23T
1 1/2 1 15/16 4 7/8 to 5 7/8 7 1/4 11/16 2 1/8 3 15/16 101179543 NP-24T
1 5/8 2 1/8 5 7/16 to 6 1/16 7 1/2 11/16 2 1/8 4 1/4 100736408 NP-26T
1 11/16 2 1/8 5 7/16 to 6 1/16 7 1/2 11/16 2 1/8 4 1/4 101179549 NP-27T
1 3/4 2 1/8 5 7/16 to 6 1/16 7 1/2 11/16 2 1/8 4 1/4 101179552 NP-28T
1 15/16 2 1/4 6 to 6 1/2 8 1/8 3/4 2 3/8 4 9/16 100990933 NP-31T
2 2 1/2 6 1/2 to 7 8 5/8 3/4 2 3/8 5 101179563 NP-32T
2 3/16 2 1/2 6 1/2 to 7 8 5/8 3/4 2 3/8 5 101179570 NP-35T
Features:
• Hardened stainless steel band protects the shaft from damage from setscrews
• Black, powder-coated epoxy finish for corrosion protection and superior performance
• Bearing setscrew access (during installation or removal) regardless of pillow block orientation
• Solid, flat feet provide increased strength, no recess corner stress points, eliminate deformation of mounting surface
and prevent accumulation of ambient material underneath
Inch
2 Bolt Holes Bearing Design: Non-Expansion
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height
Size (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
204 3/4 1 1/4 3 51/64 5 17/32 1 5/16 2 17/32 100733646 YAK3/4SGT
7/8 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 101020415 YAK7/8SGT
205 15/16 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 101020399 YAK15/16SGT
1 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 100733647 YAK1SGT
1 1/8 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 101020391 YAK1 1/8SGT
206
1 3/16 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 100733648 YAK1 3/16SGT
1 1/4 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 101020387 YAK1 1/4SGT
207 1 3/8 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 101020395 YAK1 3/8SGT
1 7/16 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 101019370 YAK1 7/16SGT
208 1 1/2 1 15/16 5 3/8 7 1/16 3/4 2 1/32 4 101423189 YAK1 1/2SGT
209 1 3/4 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 101020394 YAK1 3/4SGT
210 1 15/16 2 3/16 6 7/32 7 7/8 11/16 2 9/32 4 7/16 101019369 YAK1 15/16SGT
342 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Most popular housing design for mounted bearings and are available in several series
• All are designed to support loads primarily directed through the base
• The P2B series housing has a standard base-to-center height
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and ConCentra™ locking; only setscrew shown here
Features:
• P2BL features a low center height with a base-to-center height typically 1/16” lower than the P2B series
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and ConCentra™ locking; only setscrew shown here
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 343
Bearings
Recommended for industrial applications where normal loads are encountered. They ensure
RAK Series Cast Iron Pillow Block the user the advantages of a compact, one-piece housing, which can be mounted in any
position. The pillow blocks are self aligning at mounting with the spherical O.D. of the
bearing fitting into a corresponding spherical housing seat. These units are prelubricated
and ready for immediate installation. A grease fitting provides for relubrication if required.
Self-locking collars are supplied with all units.
Applications:
• Agriculture Bearing Design: Non-Expansion
• Fans and blowers Housing Material: Cast Iron
Inch • Food processing Locking Device: Eccentric Locking Collar
2 Bolt Holes • Conveyors Insert Type: Steel Insert
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 1 1/16 3 5/8 4 7/8 11/32 1 3/16 2 3/32 G1008KRRB 100733615 RAK1/2
203 5/8 1 1/16 3 5/8 4 7/8 11/32 1 3/16 2 3/32 G1010KRRB 102151806 RAK5/8
11/16 1 1/16 3 5/8 4 7/8 11/32 1 3/16 2 3/32 G1011KRRB 101020071 RAK11/16
204 3/4 1 1/4 3 25/32 5 15/32 1 1/4 2 15/32 G1012KRRB 100000085 RAK3/4
7/8 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 G1014KRRB 100733616 RAK7/8
205 15/16 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 G1015KRRB 100733617 RAK15/16
1 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 G1100KRRB 101971573 RAK1
1 1/16 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 G1101KRRB 101020058 RAK1 1/16
206 1 1/8 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 G1102KRRB 102042538 RAK1 1/8
1 3/16 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 G1103KRRB 101975561 RAK1 3/16
1 1/4 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 G1104KRRB 101922067 RAK1 1/4
1 5/16 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 G1105KRRB 101020065 RAK1 5/16
207
1 3/8 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 G1106KRRB 100000088 RAK1 3/8
1 7/16 1 13/16 5 1/8 6 9/16 21/32 1 27/32 3 11/16 G1107KRRB 101922066 RAK1 7/16
1 1/2 1 15/16 5 3/8 7 1/16 3/4 2 1/32 4 G1108KRRB 101955239 RAK1 1/2
208
1 9/16 1 15/16 5 3/8 7 1/16 3/4 2 1/32 4 G1109KRRB 101020067 RAK1 9/16
1 5/8 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 G1110KRRB 100733623 RAK1 5/8
209 1 11/16 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 G1111KRRB 101983718 RAK1 11/16
1 3/4 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 G1112KRRB 102151807 RAK1 3/4
1 7/8 2 3/16 6 7/32 7 7/8 11/16 2 9/32 4 7/16 G1114KRRB 101922068 RAK1 7/8
210
1 15/16 2 3/16 6 7/32 7 7/8 11/16 2 9/32 4 7/16 G1115KRRB 101999394 RAK1 15/16
2 2 7/16 6 15/16 8 3/4 3/4 2 5/16 4 29/32 G1200KRRB 101922069 RAK2
211 2 1/8 2 7/16 6 15/16 8 3/4 3/4 2 5/16 4 29/32 G1202KRRB 101020073 RAK2 1/8
2 3/16 2 7/16 6 15/16 8 3/4 3/4 2 5/16 4 29/32 G1203KRRB 100000093 RAK2 3/16
2 1/4 2 11/16 7 13/32 9 7/16 7/8 2 3/8 5 13/32 G1204KRRB 100733627 RAK2 1/4
212 2 3/8 2 11/16 7 13/32 9 7/16 7/8 2 3/8 5 13/32 G1206KRRB 101020076 RAK2 3/8
2 7/16 2 11/16 7 13/32 9 7/16 7/8 2 3/8 5 13/32 G1207KRRB 100733628 RAK2 7/16
214 2 11/16 3 8 10 1/2 1 5/16 2 7/8 6 1/16 G1211KRRB 100733629 RAK2 11/16
215 2 15/16 3 5/16 9 1/2 12 1 1/2 3 1/4 6 7/16 G1215KRRB 100733630 RAK2 15/16
RAS pillow blocks are similar in design and equal in load-carrying capacity to the
RAS Series Ball Bearing Pillow Block RAK type, but have a slightly higher base-to-center height dimension to make
them interchangeable with certain other competitive designs. The RAS pillow
block is equipped with G-KRRB (R-Seal) wide inner ring bearings.
Applications:
• Agriculture
• Fans and blowers Bearing Design: Non-Expansion
• Food processing Housing Material: Cast Iron
Inch • Conveyors Locking Device: Eccentric Locking Collar
2 Bolt Holes Insert Type: Steel Insert
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1/2 1 3/16 3 5/8 4 7/8 15/32 1 3/16 2 7/32 G1008KRRB 101020111 RAS1/2
203
5/8 1 3/16 3 5/8 4 7/8 15/32 1 3/16 2 7/32 G1010KRRB 101020119 RAS5/8
204 3/4 1 5/16 3 25/32 5 17/32 1 1/4 2 19/32 G1012KRRB 101971574 RAS3/4
7/8 1 7/16 4 1/8 5 1/2 19/32 1 13/32 2 7/8 G1014KRRB 101020121 RAS7/8
205
1 1 7/16 4 1/8 5 1/2 19/32 1 13/32 2 7/8 G1100KRRB 101999396 RAS1
1 1/8 1 11/16 4 5/8 6 3/16 21/32 1 9/16 3 11/32 G1102KRRB 101020098 RAS1 1/8
206
1 3/16 1 11/16 4 5/8 6 3/16 21/32 1 9/16 3 11/32 G1103KRRB 102151648 RAS1 3/16
1 1/4 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 3/4 G1104KRRB 101020093 RAS1 1/4
207 1 3/8 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 3/4 G1106KRRB 101020105 RAS1 3/8
1 7/16 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 3/4 G1107KRRB 102152905 RAS1 7/16
208 1 1/2 1 15/16 5 3/8 7 1/16 3/4 1 7/8 4 G1108KRRB 100733634 RAS1 1/2
1 5/8 2 1/8 5 7/8 7 17/32 3/4 2 4 3/16 G1110KRRB 100733635 RAS1 5/8
209
1 3/4 2 1/8 5 7/8 7 17/32 3/4 2 4 3/16 G1112KRRB 100733636 RAS1 3/4
1 7/8 2 1/4 6 7/32 7 7/8 3/4 2 3/16 4 1/2 G1114KRRB 101020108 RAS1 7/8
210
1 15/16 2 1/4 6 7/32 7 7/8 3/4 2 3/16 4 1/2 G1115KRRB 102042541 RAS1 15/16
2 2 1/2 6 15/16 8 3/4 13/16 2 5/16 4 31/32 G1201KRRB 101973137 RAS2
211
2 3/16 2 1/2 6 15/16 8 3/4 13/16 2 5/16 4 31/32 G1203KRRB 100733640 RAS2 3/16
2 1/4 2 3/4 7 13/32 9 7/16 15/16 2 3/8 5 1/2 G1204KRRB 100733641 RAS2 1/4
212
2 7/16 2 3/4 7 13/32 9 7/16 15/16 2 3/8 5 1/2 G1207KRRB 100733642 RAS2 7/16
215 2 15/16 3 1/4 8 1/2 10 5/8 1 2 3/4 6 15/32 G1215KRRB 100733643 RAS2 15/16
344 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
SAS Series Cast Iron 2-Bolt Ball Bearing Pillow Block
This streamlined, rugged, one-piece SAS pillow block unit combines Timken’s proven RAS housing and GYA-RRB setscrew bearing. The GYA-RRB bearing employs a positive
contact land riding seal and specially designed setscrews. The SAS pillow block can be mounted and will operate in any position. Bearing housed units are factory prelubricated,
but a grease fitting is provided to allow for relubrication, if required.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height
Size (in) (in) (in) (in) (in) (in) (in) Bearing Insert Item No. Mfr. No.
1/2 1 3/16 3 5/8 4 7/8 15/32 1 3/16 2 7/32 GYA008RRB 101925749 SAS1/2
203
5/8 1 3/16 3 5/8 4 7/8 15/32 1 3/16 2 7/32 GYA010RRB 101019234 SAS5/8
204 3/4 1 5/16 3 25/32 5 17/32 1 1/4 2 17/32 GYA012RRB 101019233 SAS3/4
7/8 1 7/16 4 1/8 5 1/2 19/32 1 13/32 2 13/16 GYA014RRB 101020277 SAS7/8
205
1 1 7/16 4 1/8 5 1/2 19/32 1 13/32 2 13/16 GYA100RRB 101019235 SAS1
1 1/8 1 11/16 4 5/8 6 3/16 21/32 1 9/16 3 9/32 GYA102RRB 101019479 SAS1 1/8
206 1 3/16 1 11/16 4 5/8 6 3/16 21/32 1 9/16 3 9/32 GYA103RRB 101019240 SAS1 3/16
1 1/4 1 11/16 4 5/8 6 3/16 21/32 1 9/16 3 9/32 GYA103RRB2 101019238 SAS1 1/4S
1 1/4 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 11/16 GYA103RRB2 101019237 SAS1 1/4
207 1 3/8 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 11/16 GYA106RRB 101020272 SAS1 3/8
1 7/16 1 7/8 5 1/8 6 9/16 23/32 1 25/32 3 11/16 GYA107RRB 101019241 SAS1 7/16
208 1 1/2 1 15/16 5 3/8 7 1/16 3/4 1 7/8 3 15/16 GYA108RRB 101020270 SAS1 1/2
209 1 3/4 2 1/8 5 7/8 7 17/32 3/4 2 4 3/16 GYA112RRB 101020271 SAS1 3/4
210 1 15/16 2 1/4 6 7/32 7 7/8 3/4 2 3/16 4 1/2 GYA115RRB 101019239 SAS1 15/16
2 2 1/2 6 15/16 8 3/4 13/16 2 5/16 4 31/32 GYA200RRB 101019242 SAS2
211
2 3/16 2 1/2 6 15/16 8 3/4 13/16 2 5/16 4 31/32 GYA203RRB 101020275 SAS2 3/16
Metric sizes also available.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Spacing Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
205 1 1 5/16 4 1/8 5 1/2 15/32 1 15/32 2 3/4 G1100KPPB 102199770 TAK1
1 1/8 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 G1102KPPB 101020327 TAK1 1/8
206
1 3/16 1 9/16 4 5/8 6 3/16 17/32 1 11/16 3 7/32 G1103KPPB 101020329 TAK1 3/16
1 1/4 1 13/16 5 1/8 6 9/16 21/32 1 25/32 3 5/8 G1104KPPB 102220560 TAK1 1/4
207 1 3/8 1 13/16 5 1/8 6 9/16 21/32 1 25/32 3 5/8 G1106KPPB 102196674 TAK1 3/8
1 7/16 1 13/16 5 1/8 6 9/16 21/32 1 25/32 3 5/8 G1107KPPB 100000100 TAK 1 7/16
208 1 1/2 1 15/16 5 3/8 7 1/16 3/4 2 1/32 4 G1108KPPB 102174463 TAK1 1/2
1 11/16 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 G1111KPPB 101020328 TAK1 11/16
209
1 3/4 2 1/16 5 7/8 7 17/32 11/16 2 1/16 4 1/8 G1112KPPB 101020330 TAK1 3/4
210 1 15/16 2 3/16 6 7/32 7 7/8 11/16 2 9/32 4 7/16 G1115KPPB 102198057 TAK1 15/16
2 2 7/16 6 15/16 8 3/4 3/4 2 3/8 5 1/32 G1200KPPB 101915403 TAK2
211
2 3/16 2 7/16 6 15/16 8 3/4 3/4 2 5/16 4 29/32 G1203KPPB 100000101 TAK2 3/16
Metric sizes also available.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 345
Bearings
Features: Applications:
• Inner and outer rings are precision hardened and honed for wear • Air handling
resistance and quiet operation • Unit handling
• DualGuard sealing system includes a mechanically retained, land riding, • Food and beverage
single lip contact seal plus a patented rubberized flinger for enhanced • Forest products
protection against contaminants • Paper
• Ball cage is made of heat stabilized nylon with fiberglass reinforcement, • Automotive
which allows higher operating temperatures and greater flexibility with • Chemical
added strength • Packaging and processing
• Anti-rotation pin makes insert replacement easier with no need to replace
grease fittings or location pins
• 65° setscrew spacing offers an optimum balance between locking force
and inner ring stress
• Grade 10 balls for quieter operation and less vibration
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Range Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
206 1 1 11/16 4 1/4 to 5 6 1/4 3/4 1 3/4 3 5/16 INSSCM100 100939344 P2BSCM100
207 1 3/16 1 7/8 4 11/16 to 5 7/16 6 1/2 23/32 1 3/4 3 3/4 INSSCM103 100733473 P2BSCM103
208 1 7/16 2 1/8 5 3/16 to 5 7/8 7 1/4 15/16 1 15/16 4 3/16 INSSCM107 100733474 P2BSCM107
209 1 1/2 2 1/8 5 1/2 to 6 3/8 7 7/16 3/4 2 4 9/32 INSSCM108 100733475 P2BSCM108
1 11/16 2 1/4 6 to 6 11/16 8 1/8 3/4 2 1/4 4 17/32 INSSCM111 100733476 P2BSCM111
210
1 3/4 2 1/4 6 to 6 11/16 8 1/8 3/4 2 1/4 4 17/32 INSSCM112 100733478 P2BSCM112
1 15/16 2 1/2 6 3/8 to 7 7/16 8 7/8 7/8 2 5/16 4 31/32 INSSCM115 101874176 P2BSCM115
211
2 2 1/2 6 3/8 to 7 7/16 8 7/8 7/8 2 5/16 4 31/32 INSSCM200 100733480 P2BSCM200
2 3/16 2 3/4 6 7/8 to 7 15/16 9 1/2 7/8 2 3/8 5 13/32 INSSCM203 100000067 P2BSCM203
212
2 1/4 2 3/4 6 7/8 to 7 15/16 9 1/2 7/8 2 3/8 5 13/32 INSSCM204 100939345 P2BSCM204
2 7/16 3 7 1/2 to 8 1/2 10 3/4 15/16 2 11/16 6 3/32 INSSCM207 100733482 P2BSCM207
214
2 1/2 3 7 1/2 to 8 1/2 10 3/4 15/16 2 11/16 6 3/32 INSSCM208 100939346 P2BSCM208
215 2 11/16 3 1/2 8 1/2 to 9 1/2 11 3/4 1 2 7/8 6 3/4 INSSCM211 101874177 P2BSCM211
2 15/16 3 1/2 8 1/2 to 9 1/2 11 3/4 1 1/4 3 6 31/32 INSSCM215 100000068 P2BSCM215
216
3 3 1/2 8 1/2 to 9 1/2 11 3/4 1 1/4 3 6 31/32 INSSCM300 100733484 P2BSCM300
218 3 7/16 4 10 5/16 to 11 5/8 14 1 5/16 3 3/8 8 INSSCM307 100000069 P2BSCM307
Features:
• Standard backing height
• Alignable
• Spring locking setscrew mount
• Relubricatable
• Extended inner ring
• Corrosion-resistant powder coating
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
11/16 1 3/16 3 1/8 to 4 1/8 4 5/8 1/2 1 5/16 2 11/32 SG211ELPA 105996493 P3S211E
3/4 1 5/16 3 3/8 to 4 3/16 5 1/8 1/2 1 7/16 2 19/32 SG212ELPA 102137815 P3S212E
1 1 7/16 3 7/16 to 4 9/16 5 3/8 9/16 1 7/16 2 7/8 SG216ELPA 102135771 P3S216E
1 3/16 1 11/16 4 1/8 to 5 1/8 6 5/16 11/16 1 5/8 3 5/16 SG219ELPA 102137458 P3S219E
1 1/4 1 7/8 4 9/16 to 5 9/16 6 3/8 13/16 1 3/4 3 11/16 SG220ELPA 102116418 P3S220E
1 7/16 1 7/8 4 9/16 to 5 9/16 6 3/8 13/16 1 3/4 3 11/16 SG223ELPA 102116419 P3S223E
1 1/2 2 1/8 5 1/32 to 6 1/32 7 1/16 13/16 1 7/8 4 SG224ELPA 102137895 P3S224E
1 3/4 2 1/8 5 13/32 to 6 17/32 7 1/4 13/16 2 4 5/16 SG228ELPA 102141070 P3S228E
1 15/16 2 1/4 5 27/32 to 6 27/32 7 7/8 7/8 2 1/8 4 9/16 SG231ELPA 102116420 P3S231E
2 3/16 2 1/2 6 5/16 to 7 1/2 8 7/8 1 2 5/16 5 SG235ELPA 106013898 P3S235E
2 7/16 2 3/4 6 29/32 to 8 5/32 9 1/2 1 7/64 2 3/8 5 3/8 SG239ELPA 106031160 P3S239E
2 15/16 3 1/2 8 1/8 to 10 1/8 12 1 7/32 2 7/8 6 21/32 SG247ELPA 106000701 P3S247E
346 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
MP Series Medium-Duty Pillow Block
Dimensionally interchangeable with many competitive units.
Features:
• Patented, felt-lined flinger seal
• 120° setscrew position
• Precision-ground, diamond-faceted setscrews
• Unique metal land riding retainer
• Zone-hardened inner race
• Permanent metal nameplate
• Black oxide, corrosion-resistant race
• Differentiated lubrication and sealing system
• Superior shaft stability
• 52100 high quality bearing steel
• Exclusive locking pin and dimple system
• Extra wide inner and outer race
• Solid base cast iron housing Bearing Design: Non-Expansion
Inch Housing Material: Cast Iron
2 Bolt Holes Locking Device: Setscrew Locking Collar
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 1 3/4 4 3/16 to 5 3/16 6 1/4 5/8 2 3 7/16 3-1 100736433 MP-16
1 3/16 1 7/8 4 1/2 to 5 1/2 6 7/8 11/16 2 1/4 3 13/16 3-13 101178928 MP-19
1 1/4 1 7/8 4 1/2 to 5 1/2 6 7/8 11/16 2 1/4 3 13/16 2-14 100736434 MP-20
1 7/16 2 1/8 5 to 6 3/8 8 3/4 2 1/4 4 3/16 3-17 100736435 MP-23
1 1/2 2 5/16 5 1/2 to 6 3/4 8 3/4 13/16 2 5/8 4 9/16 3-18 100736437 MP-24
1 11/16 2 5/16 5 7/16 to 6 13/16 8 3/4 13/16 2 5/8 4 5/8 3-111 100736438 MP-27
1 15/16 2 1/2 5 15/16 to 7 9/16 9 1/2 7/8 2 7/8 5.094 3-115 100736440 MP-31
2 2 1/2 5 15/16 to 7 9/16 9 1/2 7/8 2 7/8 5.094 2-2 100736441 MP-32
2 3/16 2 3/4 6 9/16 to 7 15/16 10 1/4 1 1/16 3 1/8 5 5/8 3-23 100736442 MP-35
2 7/16 3 7 1/8 to 8 7/8 11 1/4 1 1/16 3 1/4 6 1/4 3-27 100736443 MP-39
2 1/2 3 7 1/8 to 8 7/8 11 1/4 1 1/16 3 1/4 6 1/4 3-28 100736444 MP-40
2 11/16 3 1/2 7 7/8 to 10 1/8 13 1 1/8 3 1/2 7 3-211 100736445 MP-43
2 15/16 3 1/2 7 7/8 to 10 1/8 13 1 1/4 3 1/2 7 1/4 3-215 100736446 MP-47
3 3 1/2 7 7/8 to 10 1/8 13 1 1/4 3 1/2 7 1/4 3-3 100736447 MP-48
3 7/16 4 9 5/8 to 12 5/8 15 1 5/16 4 3/8 8 1/4 3-37 100736449 MP-55
3 15/16 5 11 3/4 to 14 3/4 17 1 5/16 4 3/4 10 3-315 101178982 MP-63
Features:
• Skwezloc® bearing-to-shaft locking system
• Patented, felt-lined flinger seal
• Unique metal land riding retainer
• Zone-hardened inner race
• Permanent metal nameplate
• Black oxide, corrosion-resistant race
• Differentiated lubrication and sealing system
• Superior shaft stability
• 52100 high quality bearing steel
• Exclusive locking pin and dimple system
• Extra wide inner and outer race
• Solid base cast iron housing
Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Skwezloc® Collar
2 Bolt Holes Insert Type: Steel Insert
Shaft Center Line Bolt Hole Base Base Base Housing Lubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 1 3/4 4 3/16 to 5 3/16 6 1/4 5/8 2 3 7/16 3-1T 101178925 MP-16T
1 3/16 1 7/8 4 1/2 to 5 1/2 6 7/8 11/16 2 1/4 3 13/16 3-13T 101178930 MP-19T
1 7/16 2 1/8 5 to 6 3/8 8 3/4 2 1/4 4 3/16 3-17T 100736436 MP-23T
1 11/16 2 5/16 5 7/16 to 6 13/16 8 3/4 13/16 2 5/8 4 5/8 3-111T 101178945 MP-27T
1 3/4 2 5/16 5 7/16 to 6 13/16 8 3/4 13/16 2 5/8 4 5/8 3-112T 101178948 MP-28T
2 3/16 2 3/4 6 9/16 to 7 15/16 10 1/4 1 1/16 3 1/8 5 5/8 3-23T 101178960 MP-35T
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 347
Bearings
Features:
• P2BM medium-duty housings accommodate a larger bearing for a given shaft size,
resulting in a greater load carrying capacity
• The series is supplied with a grease fitting for relubrication and provides for initial
bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and
ConCentra™ locking; only setscrew shown here Bearing Insert: YAR
Housing Material: Cast Iron
Locking Device: Setscrew Locking
Features:
• Cast iron housing
• Standard backing height
• Fixed
• Alignable
• Spring locking setscrew mount
• Relubricatable
• Corrosion-resistant powder coating
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Spacing Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 1 7/8 5 1/2 7 7/8 2 3 9/16 UG316L 100736284 PU316
1 3/16 2 1/8 6 7/16 8 1/4 15/16 2 1/4 4 1/16 UG319L 100736286 PU319
1 1/4 2 3/8 7 3/8 9 1/4 1 2 3/8 4 1/2 UG320L 102138865 PU320
1 7/16 2 3/8 7 3/8 9 1/4 1 2 3/8 4 1/2 UG323L 100736288 PU323
1 1/2 2 5/8 8 10 1/8 1 1/4 2 5/8 5 UG324L 100736290 PU324
1 11/16 2 7/8 8 1/4 10 1/4 1 5/16 3 5 1/2 UG327L 100736291 PU327
1 3/4 2 7/8 8 1/4 10 1/4 1 5/16 3 5 1/2 UG328L 102117930 PU328
1 15/16 3 1/8 8 7/8 11 1/8 1 3/8 3 1/8 6 UG331L 110028490 PU331
2 3 1/2 10 1/4 12 5/8 1 1/2 3 3/8 6 5/8 UG332L 102170016 PU332
2 3/16 3 1/2 10 1/4 12 5/8 1 1/2 3 3/8 6 5/8 UG335L 102169155 PU335
2 7/16 3 5/8 11 1/4 13 3/4 1 5/8 3 1/2 7 1/8 UG339L 102192392 PU339
2 11/16 4 11 13/16 14 5/8 1 5/8 3 3/4 7 3/4 UG343L 100000219 PU343
2 15/16 4 1/4 12 15 1/8 1 3/4 4 8 3/8 UG347L 110023724 PU347
3 7/16 5 1/8 12 7/8 16 1/8 2 1/4 5 9 7/8 UG355L 102167359 PU355
3 15/16 5 11/16 14 1/2 17 5/16 2 9/16 5 11 1/16 UG363L 100992076 PU363
Applied Industrial Technologies is your go-to source for a full line of conveyor components to
help you achieve the performance specifications for virtually every aspect of the conveying
chain. Our nationwide network of distribution centers, conveyor shops and service centers
carries a vast selection of conveyor solutions from the industry’s most trusted brands.
348 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
RAO Series Cast Iron 2-Bolt Ball Bearing Pillow Block
RAO heavy-type pillow blocks meet the need for a compact, economical, heavy-duty ball bearing housed unit. Designed to incorporate the tested and proven features of the
standard RAK series pillow blocks, the RAO series is equipped with heavy series GN-KRRB wide-inner-ring ball bearings for greater load capacity. All units are supplied with a
self-locking collar, which eliminates shaft shoulders, machining adapters, sleeves and locknuts and provides easy mounting.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Spacing Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 7/16 2 1/8 6 7 9/16 15/16 2 1/8 4 3/32 GN107KRRB 102195746 RAO1 7/16
1 11/16 2 5/8 7 1/2 9 7/16 1 3/16 2 5/8 5 1/8 GN111KRRB 102199929 RAO1 11/16
1 15/16 2 13/16 8 1/4 10 7/16 1 5/16 2 7/8 5 9/16 GN115KRRB 100733682 RAO1 15/16
2 3/16 3 1/16 9 11 5/16 1 7/16 3 1/8 6 1/32 GN203KRRB 101020090 RAO2 3/16
2 7/16 3 5/16 9 3/4 12 5/16 1 1/2 3 5/16 6 17/32 GN207KRRB 100733683 RAO2 7/16
2 15/16 4 1/8 12 15 1/8 1 7/8 4 1/16 8 1/16 GN215KRRB 100733685 RAO2 15/16
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 349
Bearings
Features:
• Cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces
• The medium-duty flange housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and ConCentra™ locking; only setscrew shown here
Bolt
Shaft Bolt Hole Housing Dynamic Overall
Dia. Size Spacing Length Capacity Width
(in) (in) (in) (in) (lbf) (in) Item No. Mfr. No.
1 7/16 3 7/8 4 7/8 3,150 1.528 113734440 F2B 100-TF
1 1/4 1/2 5 1/8 6 1/8 5,730 1.906 113734395 F2B 104-TF
1 1/2 1/2 5 21/32 6 3/4 6,900 2.173 113734461 F2B 108-TF
1 3/4 1/2 5 27/32 7 1/16 7,460 2.173 113734493 F2B 112-TF
1 15/16 1/2 6 3/16 7 7/16 7,890 2.465 113734484 F2B 115-TF
The Applied® Product Catalog is available as a FREE mobile app – available from the
App StoreSM on iTunes® and the Google Play™ store! The app gives you complete
access to the entire catalog and is linked directly to Applied.com for easy ordering.
Download today!
350 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
SFT Series Standard-Duty Setscrew Locking 2-Bolt Flange Unit
Designed for flush mounting with machined bases for light loads and two bolt holes.
Features:
• Patented, felt-lined flinger seal • Superior shaft stability
• 120° setscrew position • 52100 high quality bearing steel
• Precision-ground, diamond-faceted • Exclusive locking pin and dimple system
setscrews • Extra wide outer race
• Unique metal land riding retainer • Extra wide inner race
• Zone-hardened inner race • Solid base cast iron housing
• Permanent metal nameplate
• Black oxide, corrosion-resistant race
• Differentiated lubrication and
sealing system Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
Features:
• Patented, felt-lined flinger seal
• 120° setscrew position
• Precision-ground, diamond-faceted setscrews
• Unique metal land riding retainer
• Zone-hardened inner race
• Permanent metal nameplate
• Black oxide, corrosion-resistant race
• Differentiated lubrication and sealing system
• Superior shaft stability
• 52100 high quality bearing steel
• Exclusive locking pin and dimple system
• Extra wide outer race
• Extra wide inner race
• Solid base cast iron housing
Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 351
Bearings
Features:
• Cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces
• The medium-duty flange housings accommodate a larger bearing for a given shaft size, resulting in a
greater load carrying capacity
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and ConCentra™ locking;
only setscrew shown here Bearing Insert: YAR
Housing Material: Cast Iron
Locking Device: Setscrew Locking Collar
Bolt
Shaft Bolt Hole Housing Dynamic Overall
Dia. Size Spacing Length Capacity Width
(in) (in) (in) (in) (lbf) (in) Item No. Mfr. No.
1 7/16 1/2 5 1/8 6 1/8 5,730 1.906 114248502 F2BM 107-TF
1 3/4 1/2 5 27/32 7 1/16 7,460 2.173 114248636 F2BM 112-TF
1 15/16 1/2 6 3/16 7 7/16 9,810 2.465 114248638 F2BM 115-TF
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Eccentric Locking Collar
352 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
RCJT Industrial Series 2-Bolt Flange Unit
RCJT flange cartridges are basically the same design as the RCJ, except they have two bolt holes instead of four. They are designed chiefly for applications where the mounting
area is restricted. These units are factory prelubricated, but a grease fitting is provided for relubrication if required. All units are supplied with self-locking collars.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Features:
• Two-bolt mounting
• Alignable
• Spring locking setscrew mount
• Relubricatable
• Wide inner ring for increased shaft stability
• Corrosion-resistant powder coating
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 353
Bearings
S200 Series Intermediate-Duty 2-Bolt Flange Ball Bearing
Features:
• Two-bolt mounting
• Alignable
• Spring locking setscrew mount
• Relubricatable
• Extended inner ring
• Corrosion-resistant powder coating
Applications:
• Air handling
• Unit handling
• Food and beverage
• Forest products
• Paper
• Automotive
• Chemical
• Packaging and processing Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Inner Ring
354 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Cast iron flange units are designed to support shafts through walls, bulkheads and other flat surfaces
• The medium-duty flange housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking and ConCentra™ locking; only setscrew shown here
Bearing Insert: YAR
Housing Material: Cast Iron
Locking Device: Setscrew Locking Collar
Bolt
Shaft Bolt Hole Housing Dynamic Overall
Dia. Size Spacing Length Capacity Width
(in) (in) (in) (in) (lbf) (in) Item No. Mfr. No.
1 7/16 2 3/4 3 3/4 3,150 1.602 113734477 F4B 100-TF
1 1/4 1/2 3 5/8 4 5/8 5,730 1.906 113734310 F4B 104-TF
1 7/16 1/2 3 5/8 4 5/8 5,730 1.906 113734309 F4B 107-TF
1 1/2 1/2 4 5 1/8 6,900 2.189 113734289 F4B 108-TF
1 3/4 1/2 4 1/8 5 3/8 7,460 2.189 113734268 F4B 112-TF
1 15/16 1/2 4 3/8 5 5/8 7,890 2.425 113734285 F4B 115-TF
2 5/8 5 1/8 6 3/8 9,800 2.575 113734272 F4B 200-TF
2 1/4 5/8 5 5/8 6 7/8 11,840 2.906 113734305 F4B 204-TF
2 7/16 5/8 5 5/8 6 7/8 11,840 2.906 113734364 F4B 207-TF
2 3/4 3/4 6 7 7/8 14,900 3.429 113734357 F4B 212-TF
2 15/16 3/4 6 7 7/8 14,900 3.429 113734355 F4B 215-TF
Designed for flush mounting with machined bases and four bolt holes.
Features:
• Patented, felt-lined flinger seal • Superior shaft stability
• 120° setscrew position • 52100 high quality bearing steel
• Precision-ground, diamond-faceted setscrews • Exclusive locking pin and dimple system
• Unique metal land riding retainer • Extra wide outer race
• Zone-hardened inner race • Extra wide inner race
• Permanent metal nameplate • Solid base cast iron housing
• Black oxide, corrosion-resistant race
• Differentiated lubrication and sealing system Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 355
Bearings
Features:
• Zone hardened inner race • 52100 bearing steel
• Honed races • Anti-rotation rivet
• Nylon retainer • Precision-ground setscrews
• Grade 10 balls • Semisolid, cast iron base
• ± 1.5° alignment
• Contact seal and flinger
Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
Features: Applications:
• Inner and outer rings are precision hardened and honed for • Air handling
wear resistance and quiet operation • Unit handling
• DualGuard sealing system includes a mechanically retained, • Food and beverage
land riding, single lip contact seal plus a patented rubberized • Forest products
flinger for enhanced protection against contaminants • Paper
• Ball cage is made of heat stabilized nylon with fiberglass • Automotive
reinforcement, which allows higher operating temperatures • Chemical
and greater flexibility with added strength • Packaging and processing
• Anti-rotation pin makes insert replacement easier with no
need to replace grease fittings or location pins
• 65° setscrew spacing offers an optimum balance between
locking force and inner ring stress
• Grade 10 balls for quieter operation and less vibration
356 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
U200 Series Standard-Duty
4-Bolt Flange Ball Bearing
Features:
• Four-bolt mounting 300 Series Heavy-Duty 4-Bolt Flange Ball Bearing
• Alignable and relubricatable
• Spring locking setscrew mount
• Wide inner ring for increased shaft stability
Features:
Medium-Duty 4-Bolt • Four-bolt mounting
Flange Unit • Fixed
• Alignable
Features: • Spring locking setscrew mount
• Cast iron flange units are designed to support shafts • Relubricatable
through walls, bulkheads and other flat surfaces • Corrosion-resistant powder coating
• The medium-duty flange housings accommodate a
larger bearing for a given shaft size, resulting in a Bearing Design: Non-Expansion
greater load carrying capacity Housing Material: Cast Iron
• The series is supplied with a grease fitting for Inch Locking Device: Setscrew Locking Collar
relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, Shaft Bolt Hole Housing Housing Flange Overall Relubricatable
eccentric self-locking and ConCentra™ locking; only Dia. Spacing Length Height Thickness Width Bearing
setscrew shown here (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 3 1/2 4 5/8 4 5/8 9/16 1 51/64 UG316L 102138889 FU316
Bearing Insert: YAR 1 3/16 3 13/16 4 15/16 4 15/16 5/8 2 3/64 UG319L 102180169 FU319
Housing Material: Cast Iron
1 7/16 4 5 1/8 5 1/8 5/8 2 1/4 UG323L 102139687 FU323
Locking Device: Setscrew Locking Collar
1 1/2 4 5/8 6 6 5/8 2 15/32 UG324L 101462598 FU324
Bolt 1 3/4 4 7/8 6 1/4 6 1/4 11/16 2 3/4 UG328L 102116962 FU328
Shaft Bolt Hole Housing Dynamic Overall 1 15/16 5 1/8 6 1/2 6 1/2 11/16 2 31/32 UG331L 100736334 FU331
Dia. Size Spacing Length Capacity Width 2 5 3/4 7 5/16 7 5/16 3/4 3 7/32 UG332L 102169577 FU332
(in) (in) (in) (in) (lbf) (in) Item No. Mfr. No. 2 3/16 5 3/4 7 5/16 7 5/16 3/4 3 7/32 UG335L 100736336 FU335
1 7/16 1/2 4 5 1/8 6,900 2.189 113734381 F4BM 107-TF 2 1/4 6 7 5/8 7 5/8 3/4 3 15/32 UG336L 102168747 FU336
1 3/4 1/2 4 3/8 5 5/8 7,890 2.425 113734377 F4BM 112-TF 2 7/16 6 7 5/8 7 5/8 3/4 3 15/32 UG339L 100736338 FU339
1 15/16 5/8 5 1/8 6 3/8 9,800 2.575 113734375 F4BM 115-TF 2 15/16 7 1/4 9 1/16 9 1/16 7/8 4 5/16 UG347L 100736374 FU347
2 15/16 7/8 6 7 25/32 16,360 3.449 113734350 F4BM 215-TF 3 7/16 8 1/2 11 11 1 1/4 5 5/32 UG355L 100736340 FU355
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 357
Bearings
358 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
RCJ Industrial Series 4-Bolt Flange Unit
Each unit is furnished, assembled and ready for mounting by means of bolts through the flange. They use a wide inner ring bearing, which is self-aligning and compensates for
shaft misalignment. These units are factory prelubricated, but a grease fitting is provided for relubrication if required. All units are supplied with self-locking collars.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Features: Applications:
• Inner and outer rings are precision hardened and honed for wear resistance and quiet operation • Air handling
• DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal • Unit handling
plus a patented rubberized flinger for enhanced protection against contaminants • Food and beverage
• Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher • Forest products
operating temperatures and greater flexibility with added strength • Paper
• Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or • Automotive
location pins • Chemical
• 65° setscrew spacing offers an optimum balance between locking force and inner ring stress • Packaging and processing
• Grade 10 balls for quieter operation and less vibration
Outer Shaft Bolt Circle Bolt Hole Pilot Housing Housing Flange Overall Relubricatable
Ring Dia. Dia. Spacing Dia. Length Height Thickness Width
Size (in) (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
207 1 7/16 4 1/8 2.917 3 3/8 5 5 27/32 1 49/64 100733549 FCSC107
210 1 15/16 5 1/8 3.625 4 1/4 6 1/8 6 1/8 59/64 1 61/64 100939241 FCSC115
212 2 7/16 6 4.243 5 7 1/8 7 1/8 1 2 29/64 100939244 FCSC207
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 359
Bearings
SFC Series Standard-Duty Setscrew Locking Flange Cartridge Unit
Four-bolt flange with round piloted surface extended from the mounting service.
Features:
• Patented, felt-lined flinger seal • Differentiated lubrication and sealing system
• 120° setscrew position • Superior shaft stability
• Precision-ground, diamond-faceted setscrews • 52100 high quality bearing steel
• Unique metal land riding retainer • Exclusive locking pin and dimple system
• Zone-hardened inner race • Extra wide outer race
• Permanent metal nameplate • Extra wide inner race
• Black oxide, corrosion-resistant race • Solid base cast iron housing
Applications:
• Heavy loads
• Vibrating loads
• Shock loads Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
Bolt Relubricatable
Shaft Circle Bolt Hole Pilot Housing Housing Flange Overall
Dia. Dia. Spacing Dia. Length Height Thickness Width Bearing
(in) (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 3/16 3 5/8 2.56 3 4 3/8 4 3/8 3/8 1 9/16 2-13 101180481 SFC-19
3 5/8 2.56 3 4 3/8 4 3/8 3/8 1 9/16 1-14 101180487 SFC-20R
1 1/4
4 1/8 2.92 3 3/8 5 5 3/8 1 11/16 2-14 101180485 SFC-20
1 3/8 4 1/8 2.92 3 3/8 5 5 3/8 1 11/16 2-16 101180494 SFC-22
1 1/2 4 3/8 3.09 3 5/8 5 1/4 5 1/4 7/16 1 15/16 2-18 100736593 SFC-24
1 11/16 5 1/8 3.63 4 1/4 6 1/8 6 1/8 7/16 1 15/16 2-111 100736594 SFC-27
1 3/4 5 1/8 3.63 4 1/4 6 1/8 6 1/8 7/16 1 15/16 2-112 101180514 SFC-28
1 15/16 5 1/8 3.63 4 1/4 6 1/8 6 1/8 7/16 2 1/32 2-115 101180522 SFC-31
2 5 3/8 3.80 4 1/2 6 3/8 6 3/8 7/16 2 3/16 2-2 101180526 SFC-32
2 3/16 5 3/8 3.80 4 1/2 6 3/8 6 3/8 7/16 2 3/16 2-23 100736595 SFC-35
2 1/4 6 4.25 5 7 1/8 7 1/8 1/2 2 9/16 2-24 101180541 SFC-36
2 7/16 6 4.25 5 7 1/8 7 1/8 1/2 2 9/16 2-27 101180549 SFC-39
2 15/16 7 1/2 5.30 6 3/8 8 3/4 8 3/4 9/16 3 1/16 2-215 101180561 SFC-47
Features:
• Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
• DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced
protection against contaminants
• Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with
added strength
• Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
• 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
• Grade 10 balls for quieter operation and less vibration
Applications: • Paper
• Air handling • Automotive
• Unit handling • Chemical
• Food and beverage • Packaging and
• Forest products processing Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Inner Ring
Bolt Relubricatable
Outer Shaft Bolt Hole Circle Pilot Housing Housing Flange Overall
Ring Dia. Spacing Dia. Dia. Length Height Thickness Width
Size (in) (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
1 7/16 3.09 4 3/8 3 5/8 5 1/4 5 1/4 9/16 1 57/64 101874856 FCSCM107
208
1 1/2 4.00 4 3/8 3 5/8 5 1/4 5 1/4 9/16 1 57/64 100733554 FCSCM108
211 1 15/16 3.80 5 3/8 4 1/2 6 3/8 6 3/8 1 2 7/32 100733555 FCSCM115
2 3/16 4.24 6 5 7 1/8 7 1/8 1 2 29/64 100733557 FCSCM203
212
2 1/4 4.24 6 5 7 1/8 7 1/8 1 2 29/64 100939248 FCSCM204
214 2 7/16 4.60 6 1/2 5 1/2 7 5/8 7 5/8 1 1/16 2 49/64 100733558 FCSCM207
2 15/16 5.30 7 1/2 6 3/8 8 3/4 8 3/4 1 3/16 3 1/32 100939249 FCSCM215
216
3 5.30 7 1/2 6 3/8 8 3/4 8 3/4 1 3/16 3 1/32 100733560 FCSCM300
218 3 7/16 6.10 8 5/8 7 3/8 10 1/4 10 1/4 1 5/8 3 19/64 101857620 FCSCM307
360 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
MFC Series Medium-Duty Setscrew Locking 4-Bolt Flange Cartridge
Pilot dimension fits in customer’s machine.
Features:
• Patented, felt-lined flinger seal • Differentiated lubrication and sealing system
• 120° setscrew position • Superior shaft stability
• Precision-ground, diamond-faceted setscrews • 52100 high quality bearing steel
• Unique metal land riding retainer • Exclusive locking pin and dimple system
• Zone-hardened inner race • Extra wide outer race
• Permanent metal nameplate • Extra wide inner race Bearing Design: Non-Expansion
• Black oxide, corrosion-resistant race • Solid base cast iron housing Housing Material: Cast Iron
Inch Locking Device: Setscrew Locking Collar
Shaft Bolt Circle Bolt Hole Pilot Housing Housing Flange Overall Relubricatable
Dia. Dia. Spacing Dia. Length Height Thickness Width Bearing
(in) (in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 7/16 4 3/8 3.09 3 5/8 5 1/4 5 1/4 7/16 1 15/16 3-17 100736599 MFC-23
1 15/16 5 3/8 3.80 4 1/2 6 3/8 6 3/8 7/16 2 3/16 3-115 100736600 MFC-31
2 3/16 6 4.25 5 7 1/8 7 1/8 1/2 2 9/16 3-23 100736603 MFC-35
2 1/4 6 4.25 5 7 1/8 7 1/8 1/2 2 9/16 2-24 100736604 MFC-36
2 7/16 6 1/2 4.60 5 1/2 7 5/8 7 5/8 9/16 2 7/8 3-27 100736605 MFC-39
2 15/16 7 1/2 5.31 6 3/8 8 3/4 8 3/4 5/8 3 1/4 3-215 100736608 MFC-47
3 7 1/2 5.31 6 3/8 8 3/4 8 3/4 5/8 3 1/4 3-3 100736609 MFC-48
3 7/16 8 5/8 6.10 7 3/8 10 1/4 10 1/4 3/4 3 25/32 3-37 100736610 MFC-55
Features:
• Variation of pillow block housings
• Design is optimized for radial loads acting in the direction of the base or the support surface
• Tapped base units have a narrow width for tight areas and the non-tensioning end of conveyors
Features:
• Typically used in conjunction with a customer supplied frame for belt or shaft tensioning in conveyor,
elevator and power transmission applications
• A wide slot for the frame guide is standard
• The series is supplied with a grease fitting for relubrication and provides for initial bearing alignment
• Available locking mechanisms include: setscrew, eccentric self-locking, and ConCentra™ locking; only
setscrew shown here Bearing Insert: YAR
Housing Material: Cast Iron
Locking Device: Setscrew Locking
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 361
Bearings
Two-Bolt
Bolt Bolt
4 Bolt Holes
Shaft Hole Hole
Dia. Size Spacing Height Length Width Shaft Bolt Hole Bolt Hole
Series (in) (in) (in) (in) (in) (in) Item No. Mfr. No. Dia. Size Spacing Height Width
5/8 3/8 3.54 1.25 4.380 2.38 115485854 F2B-SCFS-010L-SHFS Series (in) (in) (in) (in) (in) Item No. Mfr. No.
204
3/4 3/8 3.54 1.25 4.380 2.38 115478757 F2B-SCFS-012-SHFS 204 3/4 3/8 2.51 1.25 1.11 115485821 F4B-SCFS-012-SHFS
205 1 3/8 3.89 1.37 4.890 2.63 115485849 F2B-SCFS-100-SHFS 205 1 3/8 2.75 1.37 1.32 115485817 F4B-SCFS-100-SHFS
206 1 1/4 3/8 4.59 1.59 5.510 3.13 115485845 F2B-SCFS-104S-SHFS 206 1 1/4 3/8 3.24 1.59 1.57 115485733 F4B-SCFS-104S-SHFS
1 1/4 1/2 5.12 1.76 6.180 3.50 115485843 F2B-SCFS-104-SHFS 1 1/4 1/2 3.62 1.76 1.84 115485731 F4B-SCFS-104-SHFS
207 207
1 7/16 1/2 5.12 1.76 6.180 3.50 115485830 F2B-SCFS-107-SHFS 1 7/16 1/2 3.62 1.76 1.84 115485728 F4B-SCFS-107-SHFS
208 1 1/2 1/2 5.65 1.97 6.710 3.84 115485828 F2B-SCFS-108-SHFS 208 1 1/2 1/2 4.00 1.97 2.05 115485726 F4B-SCFS-108-SHFS
1 15/16 5/8 6.18 1.98 7.480 4.31 115485826 F2B-SCFS-115-SHFS 1 15/16 5/8 4.37 1.98 2.43 115485724 F4B-SCFS-115-SHFS
210 210
2 5/8 6.18 1.98 7.480 4.31 115485825 F2B-SCFS-200-SHFS 2 5/8 4.37 1.98 2.43 115485723 F4B-SCFS-200-SHFS
Features:
• Stand-off housings for clean in place procedures
• Backside seal option for additional protection (stand-off housing only)
• IP69 rated for water, preventing grease washout
• Stainless steel housing
• Stainless steel insert with proprietary new coating
Two-Bolt
Four-Bolt
2-Bolt Flange
4-Bolt Flange
Shaft Dia.
Series (in) Item No. Mfr. No. Shaft Dia.
5/8 117367636 F2BSO-SCFS-010L-SHFS Series (in) Item No. Mfr. No.
204 3/4 117367637 F2BSO-SCFS-012-SHFS 204 3/4 117367655 F4BSO-SCFS-012-SHFS
205 1 117326172 F2BSO-SCFS-100-SHFS 205 1 117367659 F4BSO-SCFS-100-SHFS
206 1 1/4 117367644 F2BSO-SCFS-104S-SHFS 206 1 1/4 116602399 F4BSO-SCFS-104S-SHFS
1 1/4 117367646 F2BSO-SCFS-104-SHFS 1 1/4 117367664 F4BSO-SCFS-104-SHFS
207 207
1 7/16 117367649 F2BSO-SCFS-107-SHFS 1 7/16 117367667 F4BSO-SCFS-107-SHFS
208 1 1/2 117367650 F2BSO-SCFS-108-SHFS 208 1 1/2 117367669 F4BSO-SCFS-108-SHFS
362 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Outer Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Ring Dia. to Base Range Length Height Width Height
Size (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
1 3/16 1 11/16 4 39/64 to 4 57/64 6 5/16 45/64 1 25/32 3 11/32 100939754 P2BSCUEZ103PCR
206
1 1/4 1 11/16 4 39/64 to 4 57/64 6 5/16 45/64 1 25/32 3 11/32 100939755 P2BSCUEZ104SPCR
1 1/4 1 7/8 4 13/16 to 5 1/8 6 35/64 23/32 1 7/8 3 57/64 100939743 P2BSCEZ104PCR
207
1 7/16 1 7/8 4 13/16 to 5 1/8 6 35/64 23/32 1 7/8 3 57/64 100733472 P2BSCEZ107PCR
208 1 1/2 1 15/16 5 7/64 to 5 41/64 7 13/64 49/64 2 7/64 4 11/64 100939738 P2BSCBEZ108PCR
209 1 3/4 2 1/8 5 27/64 to 5 31/32 7 13/64 27/32 2 7/64 4 5/16 100939745 P2BSCEZ111PCR
1 15/16 2 1/4 6 to 6 9/16 8 1/16 59/64 2 23/64 4 9/16 100939747 P2B-SCEZ-115-PCR
210
2 2 1/4 6 to 6 9/16 8 1/16 59/64 2 23/64 4 9/16 100939748 P2BSCEZ200PCR
Outer Shaft Center Line Bolt Hole Base Base Base Housing Non-Relubricatable Relubricatable
Ring Dia. to Base Range Length Height Width Height Bearing
Size (in) (in) (in) (in) (in) (in) (in) Insert Insert Type Item No. Mfr. No. Item No. Mfr. No.
RRH1012BRR Stainless Steel Insert 101169136 CPB012SS 101169137 CPB012SSG
204 3/4 1 5/16 3 19/32 to 4 4 31/32 5/8 1 1/4 2 1/2
RRZ1012BRR ZMaRC® Coated Insert 100736982 CPB012ZM 102148133 CPB012ZMG
RRH1100BRR Stainless Steel Insert 101169138 CPB100SS 101169139 CPB100SSG
205 1 1 7/16 3 29/32 to 4 11/32 5 9/32 5/8 1 1/4 2 25/32
RRZ1100BRR ZMaRC® Coated Insert 100736983 CPB100ZM 102178739 CPB100ZMG
RRH1103BRR Stainless Steel Insert 101169140 CPB103SS 101169141 CPB103SSG
1 3/16 1 11/16 4 1/4 to 5 3/64 6 1/4 3/4 1 37/64 3 15/64
RRZ1103BRR ZMaRC® Coated Insert 101169142 CPB103ZM 102163549 CPB103ZMG
206
RRH104BRR2 Stainless Steel Insert 101174774 CPB104SSR — —
1 1/4 1 11/16 4 1/4 to 5 3/64 6 1/4 3/4 1 37/64 3 15/64
RRZ104BRR2 ZMaRC® Coated Insert 101169146 CPB104ZMR 102173460 CPB104ZMRG
RRH1104BRR Stainless Steel Insert 101169143 CPB104SS 101169144 CPB104SSG
1 1/4 1 7/8 4 11/16 to 5 1/4 6 15/32 3/4 1 49/64 3 21/32
RRZ1104BRR ZMaRC® Coated Insert 101169145 CPB104ZM 101174775 CPB104ZMG
207 1 3/8 1 7/8 4 11/16 to 5 1/4 6 15/32 3/4 1 49/64 3 21/32 RRH1106BRR Stainless Steel Insert 101169147 CPB106SS — —
RRH1107BRR Stainless Steel Insert 101169149 CPB107SS 101169150 CPB107SSG
1 7/16 1 7/8 4 11/16 to 5 1/4 6 15/32 3/4 1 49/64 3 21/32
RRZ1107BRR ZMaRC® Coated Insert 101169151 CPB107ZM 102224925 CPB107ZMG
RRH1108BRR Stainless Steel Insert 101169152 CPB108SS 101169153 CPB108SSG
208 1 1/2 1 15/16 5 5/64 to 5 5/8 6 57/64 25/32 1 57/64 3 29/32
RRZ1108BRR ZMaRC® Coated Insert 101169154 CPB108ZM 102225587 CPB108ZMG
Metric
2 Bolt Holes
Outer Shaft Center Line Bolt Hole Base Base Base Housing Non-Relubricatable Relubricatable
Ring Dia. to Base Range Length Height Width Height Bearing
Size (mm) (mm) (mm) (mm) (mm) (mm) (mm) Insert Insert Type Item No. Mfr. No. Item No. Mfr. No.
RRH20BRR Stainless Steel Insert 101174111 CPB20SS — —
204 20 33.3 91.5 to 101.5 126 16 32 64
RRZ20BRR ZMaRC® Coated Insert 101169156 CPB20ZM — —
205 25 36.5 99.5 to 110.5 134 16 32 70.5 RRZ25BRR ZMaRC® Coated Insert 101169157 CPB25ZM — —
RRH30BRR Stainless Steel Insert — — 101169158 CPB30SSG
206 30 42.9 114 to 128 159 19 40 82
RRZ30BRR ZMaRC® Coated Insert 101169159 CPB30ZM — —
208 40 49.2 129 to 143 175 20 48 99 RRZ40BRR ZMaRC® Coated Insert 101169164 CPB40ZM — —
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 363
Bearings
RSA Series Cast Iron 2-Bolt Ball Bearing Pillow Block
RSA-type pillow blocks are equipped with G-KRRB wide inner-ring ball bearings. These pillow blocks are prelubricated and ready for immediate use. A grease fitting is provided
for relubrication if required. All units are supplied with a self-locking collar.
Applications:
• Agriculture
• Fans and blowers
• Food processing
• Conveyors
Shaft Center Line Bolt Hole Base Base Base Housing Lubrication: Relubricatable
Dia. to Base Spacing Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
3/4 1 3/4 5 6 1/2 9/16 2 3 G1012KRRB 101020223 RSA3/4
1 2 5 1/2 7 5/8 2 1/8 3 3/8 G1100KRRB 101020216 RSA1
1 3/16 2 5 1/2 7 11/16 2 1/8 3 19/32 G1103KRRB 100990897 RSA1 3/16
1 1/4 2 3/8 6 1/4 8 1/4 7/8 2 5/8 4 3/8 G1104KRRB 102152734 RSA1 1/4
1 3/8 2 3/8 6 1/4 8 1/4 7/8 2 5/8 4 3/8 G1106KRRB 101020219 RSA1 3/8
1 7/16 2 3/8 6 1/4 8 1/4 7/8 2 5/8 4 3/8 G1107KRRB 100733673 RSA1 7/16
1 1/2 2 3/8 6 5/8 8 1/4 3/4 2 3/8 4 3/8 G1108KRRB 100733674 RSA1 1/2
1 11/16 2 3/8 6 5/8 8 1/4 13/16 2 3/8 4 1/2 G1111KRRB 100733675 RSA1 11/16
1 3/4 2 3/8 6 5/8 8 1/4 13/16 2 3/8 4 1/2 G1112KRRB 101020218 RSA1 3/4
1 15/16 2 3/4 8 1/4 10 5/8 1 1/32 2 3/4 5 1/8 G1115KRRB 101020217 RSA1 15/16
2 3 1/8 9 11 3/8 1 3 1/8 5 19/32 G1200KRRB 101020220 RSA2
2 3/16 3 1/8 9 11 3/8 1 3 1/8 5 19/32 G1203KRRB 101020221 RSA2 3/16
2 7/16 3 1/8 9 11 3/8 1 1/8 3 1/8 5 7/8 G1207KRRB 101020222 RSA2 7/16
2 11/16 3 3/4 10 1/4 12 5/8 1 5/16 3 1/2 6 13/16 G1211KRRB 100733676 RSA2 11/16
2 15/16 3 3/4 10 1/4 12 5/8 1 1/2 3 1/2 7 G1215KRRB 100733677 RSA2 15/16
SCEZ Series E-Z Kleen® Normal-Duty 2-Bolt Polymer Housed Flange Unit
Features: Applications:
• Inner and outer rings are precision hardened and honed for wear resistance • Food and beverage
and quiet operation • Pharmaceutical packaging
• Patented Maxlife cage is made from a high temperature polymer material, and • Processing industries
its one-of-a-kind, compartmentalized design ensures that grease pockets are • Wet, cool and cold side environments
maintained around the balls, leading to less likelihood for grease washout and
cooler operating temperatures
• Anti-rotation pin makes insert replacement easier with no need to replace
grease fittings or location pins
• 65° setscrew spacing offers an optimum balance between locking force
and inner ring stress
• Grade 10 balls for quieter operation and less vibration
364 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Marathon® Series 2-Bolt Flange Unit
FRIENDLY
Features:
• Light gray, food-compatible polyamide composite housing with embedded steel coils
• Filled polyurethane base
• 304 stainless steel setscrews 120° apart
• Stainless steel bolt hole insert
• 304 stainless steel double contact seal and flinger
Applications:
• Frequent washdowns
• Food and liquid contaminants
• Exposure to harsh cleaning agents
• Hot and cold temperatures Bearing Design: Non-Expansion
Housing Material: Composite
Inch Locking Device: Setscrew Locking Inner Ring
Outer Shaft Bolt Hole Housing Housing Flange Overall Non-Relubricatable Relubricatable
Ring Dia. Spacing Length Height Thickness Width
Size (in) (in) (in) (in) (in) (in) Bearing Insert Insert Type Item No. Mfr. No. Item No. Mfr. No.
RRH1012BRR Stainless Steel Insert 101169085 C2F012SS 101169086 C2F012SSG
204 3/4 3 17/32 4 13/32 2 3/8 19/32 1 15/32
RRZ1012BRR ZMaRC® Coated Insert 100736984 MRC.C2F012ZM 102150921 MRC.C2F012ZMG
RRH1100BRR Stainless Steel Insert 101169087 MRC.C2F100SS 101169088 MRC.C2F100SSG
205 1 3 29/32 4 7/8 2 3/4 19/32 1 17/32
RRZ1100BRR ZMaRC® Coated Insert 100736985 MRC.C2F100ZM 101174760 MRC.C2F100ZMG
RRH1103BRR Stainless Steel Insert 101169089 MRC.C2F103SS 101174104 MRC.C2F103SSG
1 3/16 4 19/32 5 39/64 3 17/64 19/32 1 21/32
RRZ1103BRR ZMaRC® Coated Insert 101169090 MRC.C2F103ZM 101174762 MRC.C2F103ZMG
206
RRH104BRR2 Stainless Steel Insert 101174763 MRC.C2F104SSR — —
1 1/4 4 19/32 5 39/64 3 17/64 19/32 1 21/32
RRZ104BRR2 ZMaRC® Coated Insert 101169094 MRC.C2F104ZMR 101452418 MRC.C2F104ZMRG
RRH1104BRR Stainless Steel Insert 101169091 MRC.C2F104SS 101169092 MRC.C2F104SSG
1 1/4 5 1/8 6 1/8 3 25/32 21/32 1 53/64
RRZ1104BRR ZMaRC® Coated Insert 101169093 MRC.C2F104ZM 101174764 MRC.C2F104ZMG
207 1 3/8 5 1/8 6 1/8 3 25/32 21/32 1 53/64 RRH1106BRR Stainless Steel Insert 101169095 MRC.C2F106SS 101169096 MRC.C2F106SSG
RRH1107BRR Stainless Steel Insert — — 101169098 MRC.C2F107SSG
1 7/16 5 1/8 6 1/8 3 25/32 21/32 1 53/64
RRZ1107BRR ZMaRC® Coated Insert 101169099 MRC.C2F107ZM 102224646 MRC.C2F107ZMG
RRH1108BRR Stainless Steel Insert 102204059 MRC.C2F108SS — —
208 1 1/2 5 21/32 6 25/32 4 9/16 9/16 2 1/32
RRZ1108BRR ZMaRC® Coated Insert 101174765 MRC.C2F108ZM 102147845 MRC.C2F108ZMG
Metric
Outer Shaft Bolt Hole Housing Housing Flange Overall Non-Relubricatable Relubricatable
Ring Dia. Spacing Length Height Thickness Width
Size (mm) (mm) (mm) (mm) (mm) (mm) Bearing Insert Insert Type Item No. Mfr. No. Item No. Mfr. No.
RRH20BRR Stainless Steel Insert 101174766 C2F20SS 101169100 C2F20SSG
204 20 90 112 60.5 15 37.3
RRZ20BRR ZMaRC® Coated Insert 101169101 MRC.C2F20ZM 102130698 MRC.C2F20ZMG
RRH25BRR Stainless Steel Insert 101174105 C2F25SS 101169102 C2F25SSG
205 25 99 124 70 15 38.8
RRZ25BRR ZMaRC® Coated Insert 101169103 MRC.C2F25ZM 101174767 MRC.C2F25ZMG
RRH30BRR Stainless Steel Insert — — 101169104 MRC.C2F30SSG
206 30 116.5 142.5 83 15 42.2
RRZ30BRR ZMaRC® Coated Insert 101169105 MRC.C2F30ZM 102147846 MRC.C2F30ZMG
207 35 130 156 96 17 46.4 RRZ35BRR ZMaRC® Coated Insert 101169107 MRC.C2F35ZM — —
SCEZ Series E-Z Kleen® Normal-Duty 4-Bolt Polymer Housed Flange Unit
Features: Applications:
• Inner and outer rings are precision hardened and honed for wear resistance and quiet operation • Food and beverage
• Patented Maxlife cage is made from a high temperature polymer material, and its one-of-a-kind, • Pharmaceutical packaging
compartmentalized design ensures that grease pockets are maintained around the balls, leading • Processing industries
to less likelihood for grease washout and cooler operating temperatures • Wet, cool and cold side environments
• Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or
location pins
• 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
• Grade 10 balls for quieter operation and less vibration
• Conforms to FDA/USDA specifications Bearing Design: Non-Expansion
Housing Material: Polymer
Locking Device: Setscrew Locking Collar
Inch Insert Type: Corrosion-Resistant Insert
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 365
Bearings
Marathon® Series 4-Bolt Flange Unit
Features: FRIENDLY
366 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Safety End Cap
Easy to install and protects exposed rotating shafts, thus reducing hazards around many types of equipment.
Features:
• End cap and mounting ring are molded in bright yellow for maximum visibility and safety
• Tough polymer components and strong adhesive bond stand up to factory usage
• End cap with 360° interlocking fit provides basic protection against contamination
and washdown
• Easy attachment of mounting ring to outboard face of a variety of housed units from Material: Polymer
different manufacturers Series: Standard 2-Bolt & 4-Bolt Flange Units
• Meets OSHA Std. 1910.219 (c)(4) Cap Type: Closed Cap
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
1 3/16 1 1/2 4 3/4 to 4 13/16 6 7/8 1 7/8 3 100738666 P2BE103R
1 1/4 1 1/2 4 3/4 to 4 13/16 6 7/8 1 7/8 3 100738667 P2BE104R
1 3/8 1 7/8 5 5/8 to 5 7/8 7 3/8 1 1/8 2 1/8 3 3/4 100940163 P2BE106R
1 7/16 1 7/8 5 5/8 to 5 7/8 7 3/8 1 1/8 2 1/8 3 3/4 100738668 P2BE107R
1 1/2 2 1/8 6 1/8 to 6 3/8 7 7/8 1 1/4 2 3/8 4 1/4 100000344 P2BE108R
1 5/8 2 1/8 6 1/8 to 6 3/8 7 7/8 1 1/4 2 3/8 4 1/4 100940164 P2BE110R
1 11/16 2 1/8 6 1/8 to 6 3/8 7 7/8 1 1/4 2 3/8 4 1/4 100738669 P2BE111R
1 3/4 2 1/4 6 7/8 to 7 1/8 8 7/8 1 5/16 2 1/2 4 1/2 100738670 P2BE112R
1 15/16 2 1/4 6 7/8 to 7 1/8 8 7/8 1 5/16 2 1/2 4 1/2 100738671 P2BE115R
2 2 1/4 6 7/8 to 7 1/8 8 7/8 1 5/16 2 1/2 4 1/2 101883522 P2BE200R
2 3/16 2 1/2 7 5/8 to 7 7/8 9 5/8 1 1/2 2 5/8 5 100000345 P2BE203R
2 1/4 2 3/4 8 3/8 to 8 5/8 10 1/2 1 5/8 2 7/8 5 1/2 100738673 P2BE204R
2 7/16 2 3/4 8 3/8 to 8 5/8 10 1/2 1 5/8 2 7/8 5 1/2 101883922 P2BE207R
2 1/2 2 3/4 8 3/8 to 8 5/8 10 1/2 1 5/8 2 7/8 5 1/2 100940166 P2BE208R
2 11/16 3 1/8 9 5/16 to 9 11/16 12 1 7/8 3 6 1/4 100940167 P2BE211R
2 3/4 3 1/8 9 5/16 to 9 11/16 12 1 7/8 3 6 1/4 100940168 P2BE212R
2 15/16 3 1/8 9 5/16 to 9 11/16 12 1 7/8 3 6 1/4 101876208 P2BE215R
3 3 1/8 9 5/16 to 9 11/16 12 1 7/8 3 6 1/4 100738677 P2BE300R
3 1/4 3 3/4 10 13/16 to 11 3/16 14 2 1/4 3 1/2 7 1/2 100940170 P2BE304R
3 7/16 3 3/4 10 13/16 to 11 3/16 14 2 1/4 3 1/2 7 1/2 101874927 P2BE307R
3 1/2 3 3/4 10 13/16 to 11 3/16 14 2 1/4 3 1/2 7 1/2 100738679 P2BE308R
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 367
Bearings
Continued from previous page.
Base Base Base Bolt Hole Housing Shaft Center Line Expansion Type Non-Expansion Type
Height Length Width Spacing Range Height Dia. to Base
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
1 3/16 1.50 105851353 P2B-EXL-103RE 105853880 P2B-EXL-103R
0.88 6.25 1.88 4.56 to 4.94 3.51
1 1/4 1.50 105861704 P2B-EXL-104RE 105849891 P2B-EXL-104R
1 3/8 1.88 105855681 P2B-EXL-106RE 105850788 P2B-EXL-106R
1.13 7.25 2.19 5.31 to 5.94 4.17
1 7/16 1.88 105854716 P2B-EXL-107RE 105846192 P2B-EXL-107R
1 1/2 2.13 105857176 P2B-EXL-108RE 105854428 P2B-EXL-108R
1.25 7.75 2.37 5.56 to 6.44 4.69 1 5/8 2.13 105851981 P2B-EXL-110RE 105854817 P2B-EXL-110R
1 11/16 2.13 105852481 P2B-EXL-111RE 105852534 P2B-EXL-111R
1 3/4 2.25 105844407 P2B-EXL-112RE 105846768 P2B-EXL-112R
1 7/8 2.25 105850061 P2B-EXL-114RE 105855276 P2B-EXL-114R
1.31 8.88 2.54 6.31 to 7.19 4.99
1 15/16 2.25 105843596 P2B-EXL-115RE 105839089 P2B-EXL-115R
2 2.25 105842903 P2B-EXL-200RE 105848797 P2B-EXL-200R
1.50 9.62 2.63 6.69 to 7.94 5.42 2 3/16 2.50 105856538 P2B-EXL-203RE 105860768 P2B-EXL-203R
2 11/16 3.13 105855236 P2B-EXL-211RE 105857284 P2B-EXL-211R
2 3/4 3.13 105840636 P2B-EXL-212RE 105858334 P2B-EXL-212R
1.88 11.75 3.32 8.06 to 10.00 6.77
2 15/16 3.13 105861421 P2B-EXL-215RE 105862490 P2B-EXL-215R
3 3.13 105849360 P2B-EXL-300RE 105847193 P2B-EXL-300R
3 3/16 3.75 105854393 P2B-EXL-303RE 105848943 P2B-EXL-303R
3 1/4 3.75 105859472 P2B-EXL-304RE 105849087 P2B-EXL-304R
2.25 13.75 4.00 10.12 to 11.75 7.97
3 7/16 3.75 105850357 P2B-EXL-307RE 105848866 P2B-EXL-307R
3 1/2 3.75 105849242 P2B-EXL-308RE 105857973 P2B-EXL-308R
2 1/4 2.75 105851945 P2B-EXL-204RE 105848485 P2B-EXL-204R
6.08 10.38 2.88 6.94 to 8.69 6.08 2 7/16 2.75 105847322 P2B-EXL-207RE 105851372 P2B-EXL-207R
2 1/2 2.75 105850329 P2B-EXL-208RE 105853110 P2B-EXL-208R
4 Bolt Holes
Base Base Base Bolt Hole Housing Shaft Center Line Expansion Type Non-Expansion Type
Height Length Width Spacing Range Height Dia. to Base
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
2 1/4 2.75 105838817 P4B-EXL-204RE 105842389 P4B-EXL-204R
1.63 10.38 3.50 7.75 to 8.25 6.08 2 7/16 2.75 105849357 P4B-EXL-207RE 105840340 P4B-EXL-207R
2 1/2 2.75 105861086 P4B-EXL-208RE 105852455 P4B-EXL-208R
2 11/16 3.13 105862421 P4B-EXL-211RE 105851224 P4B-EXL-211R
2 3/4 3.13 105857478 P4B-EXL-212RE 105844878 P4B-EXL-212R
1.88 11.75 3.75 8.75 to 10.00 6.77
2 15/16 3.13 105845397 P4B-EXL-215RE 105838714 P4B-EXL-215R
3 3.13 105857436 P4B-EXL-300RE 105847230 P4B-EXL-300R
3 3/16 3.75 105851175 P4B-EXL-303RE 105859103 P4B-EXL-303R
3 1/4 3.75 105846288 P4B-EXL-304RE 105861486 P4B-EXL-304R
2.25 13.75 4.50 10.56 to 11.75 7.97
3 7/16 3.75 105845683 P4B-EXL-307RE 105856786 P4B-EXL-307R
3 1/2 3.75 105850312 P4B-EXL-308RE 105839571 P4B-EXL-308R
3 15/16 4.25 105859577 P4B-EXL-315RE 105849645 P4B-EXL-315R
2.44 15.25 4.74 11.00 to 13.00 8.81
4 4.25 105851771 P4B-EXL-400RE 105849341 P4B-EXL-400R
4 7/16 4.75 105857057 P4B-EXL-407RE 105844181 P4B-EXL-407R
2.75 16.50 5.08 12.00 to 13.88 9.79
4 1/2 4.75 105843464 P4B-EXL-408RE 105858227 P4B-EXL-408R
4 15/16 5.50 105846264 P4B-EXL-415RE 105845329 P4B-EXL-415R
3.00 18.50 5.66 13.50 to 15.88 11.36
5 5.50 105859974 P4B-EXL-500RE 105841840 P4B-EXL-500R
368 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Industry standard “Type E” mounting dimensions for interchangeability
• Expansion capability in both pillow block and flange housing
• Replaceable inner bearing unit for ease of maintenance
• XTS-triple lip seal provides extended life in harsh environments
• High strength ductile iron housings help eliminate cracks due to high shock loads
• ±4° misalignment capability for pillow block and ±3° misalignment for flange Bearing Type: Tapered Roller Bearing
bearing simplifies the alignment process Housing Material: Ductile Iron
• Drop-in replacement for the Sealmaster “RPB” and “RFB” products Locking Device: Lock Collar
Seal Type: XTS - Triple Lip Seal
Features:
• Spring-lok 65° setscrew mounting
• Factory lubed, sealed and adjusted
• Larger rollers
• Case-carburized inner rings resist cracking
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 369
Bearings
Features:
• New patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Shaft ready installation
• No special tools required for installation
• Available in 1 1/8” to 5”
• ABB AbilityTM Smart Sensor ready
Housing Material: Class 30 Gray Iron
Locking Device: Adapter Mounted
Center Relubricatable
Shaft Line Base Base Base Housing Bolt Hole Expansion Non-Expansion
Dia. to Base Length Height Width Height Range
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
3 11/16 4 1/4 15 1/4 2 7/16 4 1/2 8 7/16 12 1/8 to 12 7/8 100942315 P4B-IP-311RE 100942314 P4B-IP-311R
3 15/16 4 1/4 15 1/4 2 7/16 4 1/2 8 7/16 12 1/8 to 12 7/8 100942319 P4B-IP-315RE 100942318 P4B-IP-315R
4 4 1/4 15 1/4 2 7/16 4 1/2 8 7/16 12 1/8 to 12 7/8 100942323 P4B-IP-400RE 100942322 P4B-IP-400R
4 7/16 4 3/4 16 1/2 2 3/4 4 3/4 9 5/8 13 to 14 100942327 P4B-IP-407RE 100942326 P4B-IP-407R
4 1/2 4 3/4 16 1/2 2 3/4 4 3/4 9 5/8 13 to 14 100942331 P4B-IP-408RE 100942330 P4B-IP-408R
4 15/16 5 1/2 18 5/8 3 5 3/8 11 1/8 15 to 16 100942335 P4B-IP-415RE 100942334 P4B-IP-415R
5 5 1/2 18 5/8 3 5 3/8 11 1/8 15 to 16 100942339 P4B-IP-500RE 100942338 P4B-IP-500R
Features:
• Interchangeable with SAF style pillow blocks
• Patented adapter mounting system
• Easy installation – no feeler gauges needed
• Easy removal – no torches, sledge hammers or special tools needed
• Up to ±1° misalignment capability
• Seal land on O.D. of inner ring maintains full contact pressure even with misaligned condition
• High capacity double row spherical bearing
• ABB AbilityTM Smart Sensor ready
Housing Material: Cast Iron
2 Bolt Holes Seal Type: TRIDENT™ Triple Lip Rubbing Seals
4 Bolt Holes
Shaft Non-Expansion Expansion
Dia.
Bearing Insert (in) Item No. Mfr. No. Item No. Mfr. No.
22213 2 7/16 100942182 P4B515-ISAF-207R 100942183 P4B515-ISAF-207RE
22215 2 11/16 101928426 P4B516-ISAF-211R 101966901 P4B516-ISAF-211RE
22215 2 15/16 100942198 P4B517-ISAF-215R 100942199 P4B517-ISAF-215RE
22218 3 7/16 100942211 P4B520-ISAF-307R 100942212 P4B520-ISAF-307RE
22220 3 15/16 100942221 P4B522-ISAF-315R 100942222 P4B522-ISAF-315RE
22222 4 7/16 100942234 P4B526-ISAF-407R 100942235 P4B526-ISAF-407RE
22226 4 15/16 100942243 P4B528-ISAF-415R 100942244 P4B528-ISAF-415RE
22228 5 7/16 101929150 P4B532-ISAF-507R 101925104 P4B532-ISAF-507RE
22228 5 1/2 101891668 P4B532-ISAF-508R 101957691 P4B532-ISAF-508RE
22232 5 15/16 100942258 P4B534-ISAF-515R 101891792 P4B534-ISAF-515RE
22232 6 101938652 P4B534-ISAF-600R 101892232 P4B534-ISAF-600RE
22236 6 7/16 101892033 P4B536-ISAF-607R 101925030 P4B536-ISAF-607RE
22236 6 1/2 101891794 P4B536-ISAF-608R 101924769 P4B536-ISAF-608RE
22236 6 15/16 101893408 P4B538-ISAF-615R 101924949 P4B538-ISAF-615RE
22236 7 101925611 P4B538-ISAF-700R 101892969 P4B538-ISAF-700RE
370 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
EP-B22400H Series Spherical Roller Bearing Cast Iron Pillow Block
Fixed Expansion
Bolts
Features:
Overall
Width
• Cast iron housing
• Factory adjusted and sealed
45
• Corrosion-resistant powder coating
Housing
Height • Hardened spring locking collar
• Direct type-e interchange
• Float configuration available upon request
Bolt Hole Base Base
Spacing Base Width Width
Height
Base Base to Length Bearing Design: Non-Expansion
Centerline
Inch
Length
Height Through
Bore Housing Material: Cast Iron
2 Bolt Holes Locking Device: Setscrew Locking Collar
Center Relubricatable
Shaft Line Bolt Hole Base Base Base Housing
Dia. to Base Range Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
1 7/16 1 7/8 4 3/4 to 6 7 3/8 1 1/8 2 1/4 3 7/8 100738933 EPB22423H
1 11/16 2 1/8 5 1/4 to 6 1/2 7 7/8 1 1/4 2 1/2 4 3/8 100738935 EPB22427H
1 15/16 2 1/4 6 1/16 to 7 1/4 8 7/8 1 5/16 2 1/2 4 9/16 100738936 EPB22431H
2 2 1/4 6 1/16 to 7 1/4 8 7/8 1 5/16 2 1/2 4 9/16 100738937 EPB22432H
2 3/16 2 1/2 6 9/16 to 8 9 5/8 1 1/2 2 9/16 5 100738938 EPB22435H
2 7/16 2 3/4 6 15/16 to 8 3/4 10 1/2 1 5/8 2 11/16 5 1/2 100738939 EPB22439H
2 15/16 3 1/8 7 13/16 to 9 3/4 11 13/16 1 7/8 3 3/16 6 5/16 100738940 EPB22447H
3 3 1/8 7 13/16 to 9 3/4 11 13/16 1 7/8 3 3/16 6 5/16 100738941 EPB22448H
3 7/16 3 3/4 9 5/16 to 11 5/16 13 13/16 2 1/4 3 1/2 7 1/2 100738943 EPB22455H
Inch
4 Bolt Holes
Center Relubricatable
Shaft Line Bolt Hole Base Base Base Housing
Dia. to Base Range Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
2 15/16 3 1/8 7 13/16 to 9 7/8 11 13/16 1 7/8 4 1/4 6 5/16 102115514 EPB22447FH
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Spacing Length Height Width Height
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
1 1 9/16 4 3/8 5 15/16 7/8 2 1/16 3 1/8 100991383 PB22416H
1 3/16 1 3/4 4 3/4 6 5/16 1 1/16 2 3/16 3 1/2 100991384 PB22419H
1 1/4 1 3/4 4 3/4 6 5/16 1 1/16 2 3/16 3 1/2 102169757 PB22420H
1 7/16 1 7/8 5 6 9/16 1 3/16 2 1/4 3 11/16 100738890 PB22423H
1 1/2 1 7/8 5 6 9/16 1 3/16 2 1/4 3 11/16 100738891 PB22424H
1 11/16 2 1/8 5 1/2 7 1/8 1 5/16 2 1/2 4 1/4 102169590 PB22427H
1 3/4 2 1/8 5 1/2 7 1/8 1 5/16 2 1/2 4 1/4 100738893 PB22428H
1 15/16 2 1/4 6 1/4 8 1/8 1 3/8 2 1/2 4 9/16 102169258 PB22431H
2 2 1/4 6 1/4 8 1/8 1 3/8 2 1/2 4 9/16 102116006 PB22432H
2 3/16 2 1/2 6 3/4 8 5/8 1 5/8 2 9/16 5 102116009 PB22435H
2 1/4 2 1/2 6 3/4 8 5/8 1 5/8 2 9/16 5 100738901 PB22436H
2 7/16 2 3/4 7 1/8 9 1/8 1 5/8 2 11/16 5 1/2 102168131 PB22439H
2 1/2 2 3/4 7 1/8 9 1/8 1 5/8 2 11/16 5 1/2 102169593 PB22440H
2 11/16 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 102169507 PB22443H
2 15/16 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 101361745 PB22447H
3 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 100738917 PB22448H
3 7/16 3 3/4 10 13 2 1/4 3 7/16 7 1/2 100000359 PB22455H
3 1/2 3 3/4 10 13 2 1/4 3 7/16 7 1/2 102169594 PB22456H
3 15/16 4 1/4 11 3/4 15 1/4 2 5/8 4 3/16 8 1/2 100000360 PB22463H
4 4 1/4 11 3/4 15 1/4 2 5/8 4 3/16 8 1/2 100738931 PB22464H
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 371
Bearings
P-LB6800 Series Spherical Roller Bearing Cast Iron Pillow Block
Features:
• Two-piece housing
• Independently flushable seals
• Self-aligning
• Tapered adapter mounted
• Grease lubrication
• Corrosion-resistant powder coating
2 Bolt Holes
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
1 7/16 2 1/4 6 1/4 to 7 8 1/4 13/16 2 3/8 4 3/8 22209LBK 102079577 PLB6823R
1 11/16 2 1/2 6 1/2 to 7 8 1/4 15/16 2 3/8 4 3/4 22210LBK 102116545 PLB6827R
1 15/16 2 3/4 7 3/8 to 7 7/8 9 5/8 15/16 2 3/4 5 1/4 22211LBK 102072367 PLB6831R
2 3/16 3 8 1/8 to 9 1/2 11 1 3 1/4 5 15/16 22213LBK 102108656 PLB6835R
2 7/16 3 1/4 8 5/8 to 9 5/8 11 1/4 1 1/8 3 1/8 6 3/8 22215LBK 102078683 PLB6839R
2 11/16 3 1/2 9 5/8 to 11 13 1 1/4 3 1/2 7 22216LBK 102082569 PLB6843R
2 15/16 3 3/4 9 7/8 to 11 13 1 1/4 3 1/2 7 5/16 22217LBK 100991009 PLB6847R
3 7/16 4 1/2 11 5/8 to 13 1/8 15 1/4 1 1/2 4 3/8 8 7/8 22220LBK 100991010 PLB6855R
Inch
4 Bolt Holes
Shaft Center Line Bolt Hole Base Base Base Housing Relubricatable
Dia. to Base Range Length Height Width Height Bearing
(in) (in) (in) (in) (in) (in) (in) Insert Item No. Mfr. No.
3 15/16 4 15/16 12 5/8 to 14 1/2 16 1/2 2 4 3/4 9 5/8 22222LBK 102079740 PLB6863FR
4 15/16 6 16 to 17 1/8 20 1/8 2 3/8 5 7/8 11 13/16 22228LBK 102082572 PLB6879FR
5 7/16 6 11/16 17 3/8 to 19 1/4 22 2 5/8 6 1/4 13 3/8 22232LBK 100739050 PLB6887FR
5 15/16 7 1/16 19 3/8 to 21 5/8 24 3/4 2 3/4 6 3/4 14 1/4 22234LBK 102082154 PLB6895FR
Shaft Center Line Bolt Hole Base Base Base Housing Exxon Ronex MP
Size Dia. to Base Spacing Length Height Width Height
Code (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
2 1 1 9/16 4 3/8 5 7/8 3/4 2 3 1/16 100739083 ZA2100
3 1 3/16 1 3/4 4 3/4 6 5/16 7/8 2 1/8 3 7/16 100739084 ZA2103
1 7/16 1 7/8 5 6 9/16 1 2 3/16 3 7/8 100000371 ZA2107
4
1 1/2 1 7/8 5 6 9/16 1 2 3/16 3 7/8 100739086 ZA2108
1 11/16 2 1/8 5 1/2 7 1/8 1 1/8 2 7/16 4 3/8 100739088 ZA2111
5
1 3/4 2 1/8 5 1/2 7 1/8 1 1/8 2 7/16 4 3/8 100739089 ZA2112
1 15/16 2 1/4 6 1/4 8 3/8 1 3/8 2 1/2 4 9/16 100739090 ZA2115
6
2 2 1/4 6 1/4 8 3/8 1 3/8 2 1/2 4 9/16 100739091 ZA2200
2 3/16 2 1/2 6 3/4 8 5/8 1 5/8 2 9/16 5 100739092 ZA2203
7
2 1/4 2 1/2 6 3/4 8 5/8 1 5/8 2 9/16 5 100739094 ZA2204
2 7/16 2 3/4 7 1/8 9 1/8 1 5/8 2 11/16 5 1/2 100739095 ZA2207
8
2 1/2 2 3/4 7 1/8 9 1/8 1 5/8 2 11/16 5 1/2 100739097 ZA2208
2 11/16 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 100739099 ZA2211
9 2 15/16 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 100739102 ZA2215
3 3 1/4 8 1/8 10 7/16 2 3 3/16 6 7/16 100739106 ZA2300
3 7/16 3 3/4 10 13 2 1/4 3 7/16 7 1/2 100739108 ZA2307
10
3 1/2 3 3/4 10 13 2 1/4 3 7/16 7 1/2 101158537 ZA2308
3 15/16 4 1/8 10 7/8 14 1/4 2 1/8 4 1/8 8 1/2 100739113 ZA2315
11
4 4 1/8 10 7/8 14 1/4 2 1/8 4 1/8 8 1/2 101158564 ZA2400
372 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features: Applications:
• Dodge manufactured in Marion, NC providing industry-leading availability • Aggregate
• Drop-in replacement with same mounted dimension as traditional SAF spherical bearings • Conveyance
• Shaft ready, factory greased, no assembly required • Load out
• Optimized housing design requires 75% less grease • Cement
• Simple set screw installation provides time saving alternative to traditional SAF spherical bearings
• +/-5° misalignment capability
• Offered in both expansion and non-expansion
• Same inner cartridge for expansion and non-expansion for inventory reduction Housing Material: Cast Iron
Inch • E-Tect seals available for additional protection against contamination Locking Device: Dual Spring-lok Collar
• ABB AbilityTM Smart Sensor ready Insert Type: Steel Insert
4 Bolt Holes
Relubricatable
Shaft Center Line Bolt Hole Base Base Base Housing
Dia. to Base Range Length Height Width Height Expansion Non-Expansion
(in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
2 15/16 3 3/4 9 7/8 to 11 12 19/32 1 1/4 3 1/2 7 59/64 100940514 P4B517TAF215RE 100940513 P4B517TAF215R
3 7/16 4 1/2 11 5/8 to 13 1/8 15 3/8 1 21/32 4 11/32 9 27/64 100940518 P4B520TAF307RE 100940517 P4B520TAF307R
3 15/16 4 15/16 12 19/32 to 14 1/2 16 1/2 1 25/32 4 3/4 10 23/64 100940522 P4B522TAF315RE 100940521 P4B522TAF315R
4 7/16 6 14 1/2 to 16 18 3/8 2 1/16 5 1/8 11 53/64 100940526 P4B526TAF407RE 100940525 P4B526TAF407R
4 15/16 6 15 5/8 to 17 3/8 19 45/64 2 1/16 5 7/8 12 37/64 100940530 P4B528TAF415RE 100940529 P4B528TAF415R
5 7/16 6 11/16 17 5/8 to 19 1/4 21 21/32 2 11/32 6 1/4 14 100940398 P4BTFXT507RE 100940397 P4BTFXT507R
5 15/16 7 1/16 19 to 21 5/8 24 3/4 2 7/8 6 3/4 14 3/8 — — 100940399 P4BTFXT515R
High capacity, tapered roller bearing allows easy upgrade from ball bearing at moderate cost.
Features: Applications:
• Dodge manufactured in Marion, NC, • Aggregate
providing industry-leading availability • Conveyors
• Case-hardened rollers and races • Load out
• XTS nitrile rubber triple lip seal • Cement
• Provides added protection against
contamination
• Factory lubed, sealed and adjusted
• Dual Spring-lok collar with 65° setscrew
mounting
• Easy installation and maintenance
• ABB AbilityTM Smart Sensor ready
Bearing Design: Non-Expansion
Housing Material: Cast Iron
Inch Locking Device: Dual Spring-lok Collar
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 373
Bearings
374 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
ZBR Series Single Set Collar Flange Block
BOLT HOLE
HOUSING Bolt Relubricatable
WIDTH
SPACING 3 JACKSCREW Shaft Circle Bolt Hole Pilot Housing Housing Flange Overall
HOLES PROVIDED Size Dia. Dia. Spacing Dia. Length Height Thickness Width
SHAFT Code (in) (in) (in) (in) (in) (in) (in) (in) Item No. Mfr. No.
DIAMETER PILOT
DIAMETER 3/4 3 5/8 2 9/16 3 4 3/8 4 3/8 7/16 2 9/16 101158965 ZBR2012
LENGTH
THRU BORE 2 15/16 3 5/8 2 9/16 3 4 3/8 4 3/8 7/16 2 9/16 101158966 ZBR2015
1 3 5/8 2 9/16 3 4 3/8 4 3/8 7/16 2 9/16 101158978 ZBR2100
BOLT CIRCLE 1 1/8 4 1/8 2 59/64 3 3/8 5 5 7/16 2 11/16 101158980 ZBR2102
DIAMETER FLANGE
HOUSING THICKNESS
OVERALL
3 1 3/16 4 1/8 2 59/64 3 3/8 5 5 7/16 2 11/16 101158981 ZBR2103
LENGTH
WIDTH 1 1/4 4 1/8 2 59/64 3 3/8 5 5 7/16 2 11/16 100739186 ZBR2104
1 7/16 4 3/8 3 3/32 3 5/8 5 1/4 5 1/4 1/2 2 7/8 100739187 ZBR2107
Features: 4
1 1/2 4 3/8 3 3/32 3 5/8 5 1/4 5 1/4 1/2 2 7/8 100739189 ZBR2108
• Easy bearing clearance: can be field adjusted to meet
1 11/16 5 1/8 3 5/8 4 1/4 6 1/8 6 1/8 1/2 3 1/8 101158991 ZBR2111
application needs 5
• Mounting to suit the load and installation requirements 1 3/4 5 1/8 3 5/8 4 1/4 6 1/8 6 1/8 1/2 3 1/8 100739191 ZBR2112
• Shaft ready: prelubricated with standard grease for 1 15/16 5 3/8 3 51/64 4 1/2 6 3/8 6 3/8 9/16 3 1/8 100739192 ZBR2115
6
normal operation; other lubricants available for special 2 5 3/8 3 51/64 4 1/2 6 3/8 6 3/8 9/16 3 1/8 100739195 ZBR-2200
conditions 2 3/16 6 4 1/4 5 7 1/8 7 1/8 9/16 3 5/16 100739196 ZBR2203
7
• Fully self-aligning: spherical roller bearing to 2 1/4 6 4 1/4 5 7 1/8 7 1/8 9/16 3 5/16 100739264 ZBR2204
accommodate operational and installation misalignment 2 3/8 6 1/2 4 19/32 5 1/2 7 5/8 7 5/8 5/8 3 1/2 101159019 ZBR2206
• Rugged housing: standard material – cast iron, steel or 8 2 7/16 6 1/2 4 19/32 5 1/2 7 5/8 7 5/8 5/8 3 1/2 100739199 ZBR2207
ductile iron available on request 2 1/2 6 1/2 4 19/32 5 1/2 7 5/8 7 5/8 5/8 3 1/2 100739204 ZBR2208
• Carburized raceways: case-carburized inner races 2 11/16 7 1/2 5 19/64 6 3/8 8 3/4 8 3/4 3/4 4 100739190 ZBR2211
provide a hard, fatigue-resistant surface and a tough, 2 3/4 7 1/2 5 19/64 6 3/8 8 3/4 8 3/4 3/4 4 100992090 ZBR2212
crack-resistant ductile core 9
2 15/16 7 1/2 5 19/64 6 3/8 8 3/4 8 3/4 3/4 4 100739209 ZBR2215
• Interchangeable seals: three types of seals to match
3 7 1/2 5 19/64 6 3/8 8 3/4 8 3/4 3/4 4 100739213 ZBR2300
the application requirements: Z seal, for the broad
range of normal operating conditions; K seal, for dusty, 3 3/16 8 5/8 6 3/32 7 3/8 10 1/4 10 1/4 15/16 4 3/8 101159054 ZBR2303
dirty conditions; and M seal, for protection against 10 3 7/16 8 5/8 6 3/32 7 3/8 10 1/4 10 1/4 15/16 4 3/8 100000373 ZBR2307
liquid contamination 3 1/2 8 5/8 6 3/32 7 3/8 10 1/4 10 1/4 15/16 4 3/8 100739214 ZBR2308
• For extra protection under severe conditions, auxiliary 3 11/16 9 3/8 6 5/8 8 1/8 10 7/8 10 7/8 1 1/8 5 3/16 101159065 ZBR2311
caps are also available 11 3 15/16 9 3/8 6 5/8 8 1/8 10 7/8 10 7/8 1 1/8 5 3/16 100739215 ZBR2315
4 9 3/8 6 5/8 8 1/8 10 7/8 10 7/8 1 1/8 5 3/16 100739216 ZBR2400
Roller Roller Stud Stud Threads Overall Unsealed/Slotted Sealed/Slotted Sealed/Hex Hole
Dia. Width Dia. Length Thread per Length
(in) (in) (in) (in) Size Inch (in) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
11/32 0.190 1/2 #10 32 7/8 — — 101087590 CF1/2N S 102118674 CF1/2N SB
1/2
3/8 0.190 5/8 #10 32 1 1/32 101087586 CF1/2 100741640 CF1/2S 100741641 CF1/2SB
5/8 7/16 0.250 3/4 1/4 28 1 7/32 101087596 CF5/8 102083051 CF5/8S 102106708 CF5/8SB
3/4 1/2 0.375 7/8 3/8 24 1 13/32 102084430 CF3/4 102080608 CF3/4S 102107454 CF3/4SB
7/8 1/2 0.375 7/8 3/8 24 1 13/32 101087607 CF7/8 102132694 CF7/8S 102119412 CF7/8SB
1 5/8 0.438 1 7/16 20 1 21/32 102083401 CF1 102083410 CF1S 102081346 CF1SB
1 1/8 5/8 0.438 1 7/16 20 1 21/32 101087610 CF1 1/8 102080986 CF1 1/8S 102107185 CF1 1/8SB
1 1/4 3/4 0.500 1 1/4 1/2 20 2 1/32 102080966 CF1 1/4 102107186 CF1 1/4S 102107011 CF1 1/4SB
1 3/8 3/4 0.500 1 1/4 1/2 20 2 1/32 102080592 CF1 3/8 102132696 CF1 3/8S 102119063 CF1 3/8SB
1 1/2 7/8 0.625 1 1/2 5/8 18 2 13/32 102081885 CF1 1/2 102132697 CF1 1/2S 102080611 CF1 1/2SB
1 5/8 7/8 0.625 1 1/2 5/8 18 2 13/32 101087618 CF1 5/8 100741643 CF1 5/8S 102105861 CF1 5/8SB
1 3/4 1 0.750 1 3/4 3/4 16 2 25/32 102107000 CF1 3/4 100990938 CF1 3/4S 102117292 CF1 3/4SB
1 7/8 1 0.750 1 3/4 3/4 16 2 25/32 102081890 CF1 7/8 — — 102108007 CF1 7/8SB
2 1 1/4 0.875 2 7/8 14 3 9/32 102080973 CF2 100990939 CF2S 102083056 CF2SB
2 1/4 1 1/4 0.875 2 7/8 14 3 9/32 — — 101087630 CF2 1/4S 102084453 CF2 1/4SB
2 1/2 1 1/2 1.000 2 1/4 1 14 3 25/32 101087632 CF2 1/2 102105864 CF2 1/2S 102117275 CF2 1/2SB
3 1 3/4 1.250 2 1/2 1 1/4 12 4 9/32 101087638 CF3 102083059 CF3S 102106899 CF3SB
4 2 1/4 1.500 3 1/2 1 1/2 12 5 25/32 — — 101087650 CF4S 102119393 CF4SB
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 375
Bearings
376 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
CAMROL® Heavy Stud Cam Follower
Features:
• Provides rapid, repeatable, reliable motion control
• Withstands intermittent shock and heavy loads of cam operation
• Heavy stud type
• Cylindrical O.D.
• Needle rollers
Roller Roller Stud Stud Threads Overall Unsealed/Slotted Sealed/Slotted Sealed/Hex Hole
Dia. Width Dia. Length Thread per Length
(in) (in) (in) (in) Size Inch (in) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
1/2 3/8 1/4 5/8 1/4 28 1 1/32 101087804 CFH1/2 101087806 CFH1/2S 100741627 CFH 1/2 SB
5/8 7/16 5/16 3/4 5/16 24 1 7/32 101087811 CFH5/8 102107190 CFH5/8S 102108663 CFH5/8SB
3/4 1/2 7/16 7/8 7/16 20 1 13/32 101087817 CFH3/4 102106508 CFH3/4S 102107453 CFH3/4SB
7/8 1/2 7/16 7/8 7/16 20 1 13/32 101087821 CFH7/8 102107017 CFH7/8S 102149626 CFH7/8SB
1 5/8 5/8 1 5/8 18 1 21/32 101087824 CFH1 — — 102081009 CFH1SB
1 1/8 5/8 5/8 1 5/8 18 1 21/32 — — — — 102107310 CFH1 1/8SB
1 1/4 3/4 3/4 1 1/4 3/4 16 2 1/32 101087829 CFH1 1/4 102084461 CFH1 1/4S 102108020 CFH1 1/4SB
1 1/2 7/8 7/8 1 1/2 7/8 14 2 13/32 102082974 CFH1 1/2 100990905 CFH1 1/2S 102108664 CFH1 1/2SB
1 3/4 1 1 1 3/4 1 14 2 25/32 101087838 CFH1 3/4 100741659 CFH1 3/4S 102108019 CFH1 3/4SB
2 1 1/4 1 1/8 2 1 1/8 12 3 9/32 101087844 CFH2 — — 100741632 CFH 2 SB
2 1/2 1 1/2 1 1/4 2 1/4 1 1/4 12 3 25/32 101087850 CFH2 1/2 — — 102106712 CFH2 1/2SB
3 1 3/4 1 1/2 2 1/2 1 1/2 12 4 9/32 — — 101087858 CFH3S 102119400 CFH3SB
Features:
• Cross drilled holes in the stud raceway and shank
and an axially drilled hole through the stud are
provided for relubrication
• Plugs are furnished to close off unused lubrication
fitting holes
• Recessed axial hole accepts a standard nominal
inch drive-type grease lubrication fitting
• Seals provide good retention of lubricant and
Features: exclusion of foreign matter
• Provides rapid, repeatable, reliable motion control • Seals have internal thrust washers made of
• Withstands intermittent shock and heavy loads of cam operation self-lubricating resin
• More corrosion resistance • A hexagonal wrench socket in the head of the
• Improved sealing stud facilitates mounting
• Quality heat treatment
• Designed to help solve corrosion problems
Roller Roller Stud Stud Threads Overall Sealed Roller Roller Stud Stud Thread Threads Overall
Dia. Width Dia. Length Thread per Length Dia. Width Dia. Length Size per Length
(in) (in) (in) (in) Size Inch (in) Item No. Mfr. No. (in) (in) (in) (in) (in) Inch (in) Item No. Mfr. No.
3/4 1/2 3/8 7/8 3/8 24 1 13/32 102119750 CFE3/4SB 3/4 1/2 3/8 7/8 3/8 24 1 13/32 101714147 CRSBE-12
1 5/8 7/16 1 7/16 20 1 21/32 102108452 CFE1SB 1 5/8 7/16 1 7/16 20 1 21/32 101665414 CRSBE-16
1 1/4 3/4 1/2 1 1/4 1/2 20 2 1/32 102118851 CFE1 1/4SB 1 1/4 3/4 1/2 1 1/4 1/2 20 2 1/32 101649090 CRSBE-20
1 1/2 7/8 5/8 1 1/2 5/8 18 2 13/32 100740769 CFE1 1/2SB 1 1/2 7/8 5/8 1 1/2 5/8 18 2 13/32 101680133 CRSBE-24
2 1 1/4 7/8 2 7/8 14 3 9/32 102118558 CFE2SB 2 1 1/4 7/8 2 7/8 14 3 9/32 101651730 CRSBE-32
2 1/2 1 1/2 1 2 1/4 1 14 3 25/32 102119756 CFE2 1/2SB 2 1/2 1 1/2 1 2 1/4 1 14 3 25/32 101657244 CRSBE-40
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 377
Bearings
MCF® Series Metric CAMROL®
Cam Follower Bearing
Features: Prefer the Applied®
• Crowned O.D.
• Sealed
• Stud type
Digital Catalog?
• Needle rollers
• Retainer Download the FREE catalog mobile
app and get access anytime or
Roller Roller Stud Stud Overall Sealed anywhere you need it!
Dia. Width Dia. Length Thread Length
(mm) (mm) (mm) (mm) Size (mm) Item No. Mfr. No.
16 11 6 16 M6 28 102081337 MCFR16S Visit Applied.com/catalog
19 11 8 20 M8 32 101088232 MCFR19S
22 12 10 23 M10 36 101088239 MCFR22S
26 12 10 23 M10 36 102082959 MCFR26S
30 14 12 25 M12 40 101088268 MCFR30S
32 14 12 25 M12 40 101088275 MCFR32S
35 18 16 32.5 M16 52 102081889 MCFR35S
378 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
CAMROL® CYR Series Cam Yoke Roller
Cam follower-type bearings without studs for shaft mounting.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 379
Bearings
Features:
• Convenient inch/metric conversions
• Controlling dimensions in inches for nominal inch bearings and in millimeters for nominal metric bearings
Features:
• Drawn cup
• Closed for shaft ends
• Open for through shafts
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
380 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
MI Series Inner Race MR Series CAGEROL Bearing
Features:
• Needle rollers retained by a steel cage
• Designed to accommodate higher speeds and some misalignment
I.D. O.D. Width
(in) (in) (in) Item No. Mfr. No.
• Heavy-duty roller bearing
• Unsealed
3/4 102107280 MI8N
1/2 3/4
1 102106781 MI8
3/4 102109344 MI10N Dynamic Static Steel
5/8 7/8
1 102107994 MI10 Load Load
3/4 100000475 MI12N I.D. O.D. Width Rating Rating
3/4 1 (in) (in) (in) (lbf) (lbf) Item No. Mfr. No.
1 102106606 MI12
13/16 1 1 102108944 MI13 3/4 4,990 5,400 101087193 MR12N
3/4 1 1/4
1 100990943 MI14N 1 6,830 8,100 102109104 MR12
7/8 1 1/8
1 1/4 101087144 MI14 3/4 5,280 6,000 102109349 MR14N
7/8 1 3/8
15/16 1 1/8 1 1/4 102107815 MI15 1 7,240 9,000 101087199 MR14
1 102109100 MI16N 3/4 5,840 7,100 102146828 MR16N
1 1 1/4 1 1 1/2
1 1/4 102107434 MI16 1 8,000 10,600 102109272 MR16
1 101087149 MI18N 1 8,720 12,200 100740286 MR18N
1 1/8 1 3/8 1 1/8 1 5/8
1 1/4 100990945 MI18 1 1/4 10,900 16,300 102109350 MR18
1 3/16 1 1/2 1 1/4 100000478 MI19 1 9,020 13,100 102106790 MR20N
1 1/4 1 3/4
1 102106445 MI20N 1 1/4 11,300 17,500 100000485 MR 20
1 1/4 1 1/2
1 1/4 102107433 MI20 1 9,640 14,700 101087234 MR 22 N
1 3/8 1 7/8
1 101087151 MI21N 1 1/4 12,100 19,700 100990950 MR22
1 5/16 1 5/8
1 1/4 101087150 MI21 1 10,300 15,500 102146829 MR24N
1 1/2 2 1/16
1 3/8 1 3/4 1 1/4 102106446 MI22 1 1/4 13,000 20,800 102109273 MR24
1 102109678 MI24N 1 10,600 16,400 102117699 MR26N
1 1/2 1 3/4 1 5/8 2 3/16
1 1/4 102106611 MI24 1 1/4 13,300 22,100 101087251 MR26
1 101087158 MI26N 1 11,200 18,100 101087263 MR28N
1 5/8 2 1 3/4 2 5/16
1 1/4 101087156 MI26 1 1/4 14,100 24,400 102106696 MR28
1 1/2 102132755 MI28N 1 12,000 20,700 102109274 MR32N
1 3/4 2 1/4 2 2 9/16
1 3/4 102108410 MI28 1 1/4 15,200 27,900 102107998 MR32
1 15/16 2 1/2 1 3/4 102108411 MI31 1 1/2 22,400 39,100 102109352 MR36N
2 1/4 3
1 1/2 100000484 MI32N 1 3/4 26,000 47,400 100740288 MR36
2 2 1/2
1 3/4 102109346 MI32 1 1/2 23,400 42,900 101087302 MR40N
2 1/2 3 1/4
2 1/4 2 3/4 1 3/4 102132756 MI36 1 3/4 27,200 52,100 100000487 MR 40
1 1/2 102107437 MI40N 2 3/4 3 1/2 1 3/4 28,400 56,700 102146830 MR44
2 1/2 3
1 3/4 101087161 MI40 1 1/2 26,100 52,300 102108415 MR48N
3 3 3/4
2 5/8 3 1/4 1 3/4 101087163 MI42 1 3/4 30,300 63,400 101087314 MR48
2 3/4 3 1/4 1 3/4 101087164 MI44 3 1/4 4 1/4 1 3/4 29,900 64,400 102117621 MR52
3 3 1/2 2 100740280 MI48 3 1/2 4 1/2 2 35,900 83,500 102107999 MR56
3 1/2 4 2 102107284 MI56 4 5 2 38,000 93,800 102109276 MR64
Conveyor Components:
Smoother Handling, Increased Movement
With so many moving parts, it’s no wonder that unplanned downtime may occur
from poor lubrication, improper fittings and countless other challenges.
Applied Industrial Technologies is your go-to source for a full line of conveyor
components to help you achieve the performance specifications for virtually every
aspect of the conveying chain. Our nationwide network of distribution centers,
conveyor shops and service centers carries a vast selection of conveyor
solutions from the industry’s most trusted brands.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 381
Bearings
Features:
• Convenient inch/metric conversions
• Controlling dimensions in inches for
nominal inch bearings
Features:
I.D. O.D. Width • Convenient inch/metric conversions
(in) (in) (in) Item No. Mfr. No. • Controlling dimensions in inches for nominal inch bearings
3/4 101713450 IR-081212
1/2 3/4
1 101718473 IR-081216
3/4 101710996 IR-101412
5/8 7/8
1 101712181 IR-101416 Limiting Limiting Dynamic Static Steel
3/4 101711088 IR-121612 Speed Speed Load Load
3/4 1
1 101711163 IR-121616 I.D. O.D. Width Grease Oil Rating Rating
13/16 1 1 101736039 IR-131616 (in) (in) (in) (rpm) (rpm) (lbf) (lbf) Item No. Mfr. No.
1 101716592 IR-141816 3/4 16,000 25,000 4,650 5,240 101710989 HJ-122012
7/8 1 1/8 3/4 1 1/4
1 1/4 101710997 IR-141820 1 16,000 25,000 6,190 7,580 101713443 HJ-122016
1 101711087 IR-151816 3/4 13,000 21,000 5,180 6,270 101711587 HJ-142212
15/16 1 1/8 7/8 1 3/8
1 1/4 101714882 IR-151820 1 13,000 21,000 6,910 9,070 101710642 HJ-142216
1 101713453 IR-162016 3/4 12,000 18,000 5,680 7,300 101757849 HJ-162412
1 1 1/4 1 1 1/2
1 1/4 101713455 IR-162020 1 12,000 18,000 7,560 10,600 101710643 HJ-162416
1 101757852 IR-182216 1 10,000 16,000 8,170 12,100 101711082 HJ-182616
1 1/8 1 3/8 1 1/8 1 5/8
1 1/4 101712743 IR-182220 1 1/4 10,000 16,000 10,100 15,800 101713548 HJ-182620
1 3/16 1 1/2 1 1/4 101711090 IR-192420 1 9,100 14,000 8,410 12,900 101711589 HJ-202816
1 1/4 1 3/4
1 101711597 IR-202416 1 1/4 9,100 14,000 10,400 16,900 101712175 HJ-202820
1 1/4 1 1/2
1 1/4 101718476 IR-202420 1 8,200 13,000 8,950 14,400 101716589 HJ-223016
1 3/8 1 7/8
1 101712186 IR-212616 1 1/4 8,200 13,000 11,100 18,900 101710991 HJ-223020
1 5/16 1 5/8
1 1/4 101714883 IR-212620 1 7,600 12,000 10,700 16,300 101713444 HJ-243316
1 1/2 2 1/16
1 5/8 1 1/4 101757853 IR-222620 1 1/4 7,600 12,000 13,200 21,400 101713359 HJ-243320
1 3/8
1 3/4 1 1/4 101713364 IR-222820 1 7,000 11,000 10,900 17,200 101713445 HJ-263516
1 5/8 2 3/16
1 101713553 IR-242816 1 1/4 7,000 11,000 13,500 22,600 101710645 HJ-263520
1 1/2 1 3/4
1 1/4 101711166 IR-242820 1 6,400 9,900 11,200 18,200 101711155 HJ-283716
1 3/4 2 5/16
1 101713368 IR-273216 1 1/4 6,400 9,900 13,900 23,900 101712336 HJ-283720
1 11/16 2
1 1/4 101713458 IR-273220 1 5,600 8,600 12,100 20,900 101711590 HJ-324116
2 2 9/16
1 1/2 101716594 IR-283624 1 1/4 5,600 8,600 15,000 27,500 101710646 HJ-324120
1 3/4 2 1/4
1 3/4 101737284 IR-283628 1 1/2 5,000 7,600 20,200 36,900 101712740 HJ-364824
2 1/4 3
1 15/16 2 1/2 1 3/4 101712745 IR-314028 1 3/4 5,000 7,600 23,400 44,500 101713446 HJ-364828
1 1/2 101714885 IR-324024 1 1/2 4,400 6,800 21,800 42,100 101713549 HJ-405224
2 2 1/2 2 1/2 3 1/4
1 3/4 101715639 IR-324028 1 3/4 4,400 6,800 25,200 50,800 101711083 HJ-405228
1 1/2 101758284 IR-364424 1 1/2 4,000 6,200 22,700 45,700 101714878 HJ-445624
2 1/4 2 3/4 2 3/4 3 1/2
1 3/4 101710649 IR-364428 1 3/4 4,000 6,200 26,300 55,100 101757850 HJ-445628
1 1/2 101716595 IR-404824 1 1/2 3,700 5,600 24,100 50,900 101711156 HJ-486024
2 1/2 3 3 3 3/4
1 3/4 101712187 IR-404828 1 3/4 3,700 5,600 43,900 86,000 101712742 HJ-486028
2 3/4 3 1/4 1 3/4 101713461 IR-445228 3 1/4 4 1/4 1 3/4 3,400 5,300 36,400 68,600 101711157 HJ-526828
3 3 1/2 2 101712345 IR-485632 3 1/2 4 1/2 2 3,200 4,900 42,000 84,300 101713550 HJ-567232
382 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Dimensions for bore and O.D. of thrust needle roller and cage assemblies and thrust washers are nominal
• Thrust washers are burnished for at least 1/4 of the bore area with the remainder a rough breakaway finish
Width
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 383
Bearings
COM Series Two-Piece Commercial Spherical Bearing
Features:
• Economical alternative
• Outer race is made of carbon steel with protective coating for corrosion resistance
• Ball is made of alloy steel, heat-treated and chrome-plated
Features:
• Self-lubricating patented Frelon® liner
• Oil free, maintenance free
• Wide temperature range: -400 °F to 400 °F (-240 °C to 204 °C)
• Shock load absorption
• Vibration dampening – smooth and quiet linear motion
• 20x more load capacity than ball bearings
• Linear material similar to energized PTFE seals
• Harmlessly slides over particulates, eliminating galling and shaft damage
Closed Open • Resistant to chemicals and corrosive environments
• Custom configuration available
• Stainless steel – Frelon® lining is available
Material: Aluminum, Frelon® Lining
384 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Features:
• Self-aligning up to ± 1/2°
• Can be mounted in a customized housing
• Can be adjusted to take out diametrical clearance
• Corrosion-resistant option available
• Nylon ball option available
• Integral seal option available
• Closed type for end supported applications where spanning or bridging a gap
• Open type for continuously supported applications where maximum rigidity and
Closed Open stiffness are required
Material: Delrin
Closed Open
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 385
Bearings
Features:
• High operating temperature capability
• Self-aligning for easy installation
• Easily mounted and secured with four mounting bolts
• All metal construction for increased rigidity
• Complies with RoHS restrictions on the use of certain hazardous
substances in electrical and electronic equipment
• Continuously supported applications where maximum rigidity
and stiffness are required
CL Dynamic
Shaft Body to Overall Overall Overall Load
Dia. Height Base Width Height Length Rating
(in) (in) (in) (in) (in) (in) (lbf) Item No. Mfr. No.
1/2 1.50 7/8 2 1.50 1 1/2 60 101197140 PBO8OPN
3/4 2.00 1 1/8 2 3/4 2.00 2 140 100765224 PBO12OPN
1 2.38 1 3/8 3 1/4 2.38 2 1/4 240 100765225 PBO16OPN
1 1/4 3.06 1 3/4 4 3.06 2 3/4 400 101197131 PBO20OPN
1 1/2 3.50 2 4 3/4 3.50 3 600 101197132 PBO24OPN
2 4.50 2 1/2 6 4.50 3 1/2 860 101197133 PBO32OPN
386 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Features:
• High operating temperature capability
• Self-aligning for easy installation
• Easily mounted and secured with four mounting bolts
• All metal construction for increased rigidity
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
CL Dynamic
Shaft Body to Overall Overall Overall Load
Dia. Height Base Width Height Length Rating
(in) (in) (in) (in) (in) (in) (lbf) Item No. Mfr. No.
1/4 0.75 0.438 1.63 0.810 1.190 60 101197332 SPB4
3/8 0.88 0.500 1.75 0.938 1.310 100 101197337 SPB6
1/2 1.13 0.687 2.00 1.250 1.690 255 101197343 SPB8
5/8 1.44 0.875 2.50 1.625 1.940 450 101197299 SPB10
3/4 1.56 0.937 2.75 1.750 2.063 600 100765276 SPB12
1 1.94 1.187 3.25 2.190 2.810 1,050 100765268 SPB16
1 1/4 2.50 1.500 4.00 3.250 3.625 1,500 100765273 SPB20
1 1/2 2.88 1.750 4.75 3.250 4.000 2,000 100765263 SPB24
2 3.63 2.125 6.00 4.063 5.000 3,000 100765274 SPB32
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 387
Bearings
Continued from previous page.
Twin Closed
Twin Open
Features:
• Self-lubricating patented Frelon® liner
• Oil free, maintenance free
• Wide temperature range: -400 °F to 400 °F (-240 °C to 204 °C)
• Shock load absorption
Closed • Vibration dampening – smooth and quiet linear motion
• 20x more load capacity than ball bearings
• Linear material similar to energized PTFE seals
• Harmlessly slides over particulates, eliminating galling and shaft damage
• Resistant to chemicals and corrosive environments
• Self-aligning
• Custom configuration available
• Available in open, closed, single and twin blocks
Open
Self-Lubricating (Closed)
Self-Lubricating (Open)
388 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
These shaft supports simplify mounting of Thomson 60 case-hardened and ground LinearRace shafts for use with Thomson Ball Bushing™ bearings or Thomson Roundway™
bearings.
Features:
• Simplify shaft mounting
• Eliminates many problems encountered in the designing and the manufacturing of shaft supporting devices
• Can be used horizontally or vertically, and in many different arrangements
• Suitable for use with open Ball Bushing™ bearings
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• These rails are nonadjustable; shimming or grouting is suggested for high precision applications to eliminate
variations in the surface of the base, or the tolerances between rail sections
The shaft on which Thomson Ball Bushing® and Thomson Roundway® bearings act as the inner bearing race.
Features:
• The hardness is Rockwell of 60C minimum for excellent wear resistance
• A carefully ground finish of 8Ra or better for a super smooth bearing surface that reduces friction and wear
• Shafting is straight within 0.001” per foot cumulative (0.002” TIR)
• Ends are chamfered about 1/32” to 1/16” x 45°
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• Special cut-to-length shafting options available
Class: L
Material: Carbon Steel
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 389
Bearings
Features:
• Available from stock in most material types and options
• Made of high quality, specially developed alloy steel
• Induction hardened with Rockwell values specific to the desired material
• The case depth is precisely controlled for consistent quality
• Centerless ground for an industry leading cataloged surface finish of 8 Ra max.
• Roundness within 0.000080” for class L, S, D, M and 0.000050” for class N
• Straight within 0.001” per foot cumulative when shipped from the factory
• Can be cut to your specified length
• Stocked with radial holes drilled and tapped to accept a continuous shaft support rail
• Can be conditioned for corrosive environments
Class: M
Bishop-Wisecarver’s original DualVee® guide wheels are ideal for a wide array of applications from the clean room to the sawmill. The recirculating elements are self-contained
and isolated from the environment; rolling contact between the wheel and track sweeps debris aside, making it ideal for use in contaminated environments.
Features:
• Double row angular contact ball bearings for linear guides
• Inside vee or outside vee surfaces can be employed to support loads
• Use with DualVee® support bushings or journals and single edge track
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
• High temperature, lower temperature and washdown versions also available (refer
to DualVee® Specialty Guide Wheel)
Guide Wheel
Bore Inner Radial Dynamic Axial Dynamic
O.D. Size Width Vee Dia. Load Rating Load Rating
(in) (in) (in) (in) (lbf) (lbf) Type of Bearing Item No. Mfr. No.
440C Stainless Steel Sealed 101839117 W1SSX
0.771 0.1875 0.310 0.626 274 57 52100 Steel Sealed 101839055 W1X
52100 Steel Shielded 101841802 W1
440C Stainless Steel Sealed & Shielded 101839118 W2SSX
1.210 0.3750 0.438 1.000 596 141
52100 Steel Sealed & Shielded 101841445 W2X
440C Stainless Steel Sealed & Shielded 101841864 W3SSX
1.803 0.4724 0.625 1.500 1,326 382
52100 Steel Sealed & Shielded 100938560 W3X
440C Stainless Steel Sealed & Shielded 101886440 W4SSX
2.360 0.5906 0.750 2.000 2,181 900
52100 Steel Sealed & Shielded 101839650 W4X
440C Stainless Steel Sealed & Shielded 101841118 W4SSXXL
2.968 0.8661 1.000 2.500 3,215 1,473
52100 Steel Sealed 101865774 W4XXL
WARNING: This product may contain chemicals such as chromium, cobalt, lead and nickel, known to the State of California to cause cancer, birth defects or reproductive harm.
For more information visit www.P65Warnings.ca.gov.
Applied® carries the right tool for the right job. Check out our
tool selection in Chapter 1, or visit Applied.com for a more
comprehensive offering.
390 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Bishop-Wisecarver’s DualVee family of guide wheels now includes high temperature, low temperature and patented washdown versions to fit ANY application requirement.
Features:
• Double row, angular contact ball bearings for linear guides
• Inside vee or outside vee surfaces can be employed to support loads
• Use with DualVee® support bushings and single edge track
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment Roller Type: V-Groove
Bishop Wisecarver’s DualVee® studded guide wheels provide simplified installation without the need for support bushings. Guide wheels are permanently attached to threaded
studs in eccentric and concentric versions. Available in carbon steel for heavy-duty loading conditions or overmolded polymer for light-duty applications. Ideal for use in a wide
variety of environments from the clean room to the sawmill.
JOURNAL STUD
DIAMETER HEIGHT
OVERALL
HEIGHT ROLLER GROOVE
HIEGHT LOCATION
STUD
HEIGHT
OFFSET
ROLLER
DIAMETER
Features:
• Easy installation and eccentric adjustment
• Steel version has 52100 carbon steel double row angular contact ball bearing with 303 stainless steel threaded stud
• Polymer version has 440C stainless steel single row ball bearing with 303 stainless steel threaded stud
• Inside vee or outside vee surfaces can be employed to support loads
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
WARNING: This product may contain chemicals such as chromium, cobalt, lead and nickel, known to the State of California to cause cancer, birth defects or reproductive harm.
For more information visit www.P65Warnings.ca.gov.
*Eccentric wheels only.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 391
Bearings
A B F A B2 F
Features:
• Outer ring made of case-hardened steel
• Handles very high axial and radial loads
D D • Easily interchangeable components for less down time
E E
Body Roller Max. Static Max. Radial Flange Plate: No Flange Plate: Yes
O.D. Width Length Load Rating Load Rating Depth Depth
Type (mm) (mm) (mm) (kN) (kN) Item No. Mfr. No. (mm) Item No. Mfr. No. (mm)
62.0 20 20 2.4 7.2 101595339 HVBEA-454 37.5 101394851 HVBEA-454/HVP0 43.0
Eccentric 70.1 23 22 2.8 8.6 101889194 HVBEA-455 44.0 101383824 HVBEA-455/HVP1 53.5
Adjustable 77.7 23 24 3.0 8.9 102001372 HVBEA-456 48.0 101382565 HVBEA456/HVP2 52.5
Axial 88.4 30 26 5.2 15.6 101814168 HVBEA-458 57.0 101559043 HVBEA-458/HVP3 64.5
107.7 31 34 5.5 16.5 101495042 HVBEA-461 69.0 101535351 HVBEA-461/HVP4 76.0
52.5 17 15 1.7 5.2 102059288 HVB-053 33.0 102128636 HVB-053/HVPS 38.0
62.0 20 20 2.4 7.2 101815835 HVB-054 37.5 102195102 HVB-054/HVP0 43.0
70.1 23 22 2.8 8.6 101889730 HVB-055 44.0 101687926 HVB-055/HVP1 52.0
Fixed Axial
77.7 23 24 3.0 8.9 101630520 HVB-056 48.0 101784757 HVB-056/HVP2 52.5
88.4 30 26 5.2 15.6 101822946 HVB-058 57.0 101798226 HVB-058/HVP3 63.0
107.7 31 34 5.5 16.5 102211129 HVB-061 69.0 101471887 HVB-061/HVP4 74.0
392 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Friction-Disc Clutch
Factory set to slip at rated capacity, protecting actuator from over-travel and/or excessive loads. Clutch is not designed for continuous operation and will not shut off power to the
motor. Customer-furnished external limit switches are recommended for this type of application.
Limit Switches
Fully adjustable limit switches eliminate the need for customer-supplied external limit switches. Switches can be set to stop motion of the translating tube at any position of the
stroke or at the full extend and full retract position.
Features:
• 100 and 250 lb linear actuators
» Compact size
SPA6415 » Belt drive for quiet operation on TMD models
SPB6405 » Adjustable, reed-type limit switches — relays not required
» 115 VAC or 12 VDC power supply available
» Aluminum housing and outer tube
» Stainless steel translating tube
» Keyed translating tube
• 500 lb linear actuators
» Patented, bi-directional ball brake — AC units
» Patented spring brake — DC units
» 20:1 ratio gear set for long life
» Zinc-plated steel translating tube
MPB6905 TMD01-1906 » AC units are equipped with internal adjustable limit switches or clutch
» DC units are equipped with travel/load limiting clutch
» AC units require 28 to 33 mfd capacitor
• 1,500 lb linear actuators
» Patented, bi-directional spring brake
» Two-stage gear set
» Adjustable internal limit switches
» Manual operation in the event of a power failure
» Includes capacitor enclosed in actuator housing
TMD02-1906 MPD6405
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 393
Bearings
Prepackaged O-Ring
An O-ring functions as a seal through the mechanical deformation of the elastomeric compound by mating metal surfaces. The resilient rubber conforms to
the shape of the metal sections and blocks the passage of gases or liquids. If pressure increases, the O-ring is further deformed and provides tighter sealing.
Features:
• Seals over wide range of pressures, temperatures and tolerances
• Ease of service; no smearing or retightening
• No critical torque on tightening
Durometer: 70
Material: Nitrile Buna-N
I.D. O.D. Width Pkg. Qty. I.D. O.D. Width Pkg. Qty.
(in) (in) (in) (Pieces) Item No. Mfr. No. (in) (in) (in) (Pieces) Item No. Mfr. No.
1/32 3/32 1/32 25 102220081 01 001-O PACK 1 9/16 1 3/4 3/32 10 102224168 01 129-O PACK
3/64 9/64 3/64 25 102223054 01 002-O PACK 1 3/4 1/16 10 102218759 01 030-O PACK
1/16 3/16 1/16 25 102223224 01 003-O PACK 1 13/16 3/32 10 102222440 01 130-O PACK
1 5/8
5/64 13/64 1/16 25 102220818 01 004-O PACK 1 7/8 1/8 10 102223324 01 223-O PACK
3/32 7/32 1/16 25 102224163 01 005-O PACK 2 3/16 10 102224003 01 326-O PACK
1/8 1/4 1/16 25 102223988 01 006-O PACK 1 11/16 1 7/8 3/32 10 102223242 01 131-O PACK
5/32 9/32 1/16 25 102219856 01 007-O PACK 1 7/8 1/16 10 102222940 01 031-O PACK
3/16 5/16 1/16 25 102223989 01 008-O PACK 1 15/16 3/32 10 102223243 01 132-O PACK
1 3/4
7/32 11/32 1/16 25 102220148 01 009-O PACK 2 1/8 10 102232766 01 224-O PACK
1/4 3/8 1/16 25 102218757 01 010-O PACK 2 1/8 3/16 10 102224172 01 327-O PACK
5/16 7/16 1/16 25 102219857 01 011-O PACK 1 13/16 2 3/32 10 102222441 01 133-O PACK
1/2 1/16 25 102223990 01 012-O PACK 2 1/16 10 102232755 01 032-O PACK
3/8
9/16 3/32 25 102223992 01 110-O PACK 2 1/16 3/32 10 102224413 01 134-O PACK
1 7/8
9/16 1/16 25 102223055 01 013-O PACK 2 1/8 1/8 10 102220157 01 225-O PACK
7/16
5/8 3/32 25 102232756 01 111-O PACK 2 1/4 3/16 10 102220159 01 328-O PACK
5/8 1/16 15 102224409 01 014-O PACK 1 15/16 2 1/8 3/32 10 102222942 01 135-O PACK
1/2
11/16 3/32 25 102218760 01 112-O PACK 2 1/8 1/16 10 102224410 01 033-O PACK
11/16 1/16 15 102224073 01 015-O PACK 2 2 3/16 3/32 10 102223244 01 136-O PACK
9/16
3/4 3/32 25 102220153 01 113-O PACK 2 3/8 3/16 10 102223253 01 329-O PACK
3/4 1/16 15 102232753 01 016-O PACK 2 1/16 2 1/4 3/32 10 102220086 01 137-O PACK
5/8
13/16 3/32 25 102224411 01 114-O PACK 2 1/4 1/16 10 102220151 01 034-O PACK
13/16 1/16 15 102220082 01 017-O PACK 2 5/16 3/32 10 102224078 01 138-O PACK
11/16 2 1/8
7/8 3/32 25 102220154 01 115-O PACK 2 3/8 1/8 10 102223325 01 227-O PACK
7/8 1/16 15 102222436 01 018-O PACK 2 1/2 3/16 10 102218766 01 330-O PACK
3/4 15/16 3/32 25 102223241 01 116-O PACK 2 3/16 2 3/8 3/32 10 102232759 01 139-O PACK
1 1/8 15 102220215 01 210-O PACK 2 3/8 1/16 10 102224075 01 035-O PACK
15/16 1/16 15 102223991 01 019-O PACK 2 7/16 3/32 10 102224414 01 140-O PACK
2 1/4
13/16 1 3/32 15 102223994 01 117-O PACK 2 1/2 1/8 10 102220216 01 228-O PACK
1 1/16 1/8 15 102224421 01 211-O PACK 2 5/8 3/16 10 102224004 01 331-O PACK
1 1/16 15 102224074 01 020-O PACK 2 5/16 2 1/2 3/32 10 102220087 01 141-O PACK
7/8 1 1/8 1/8 15 102220091 01 212-O PACK 2 1/2 1/16 10 102220083 01 036-O PACK
1.1670 3/32 15 102232758 01 118-O PACK 2 9/16 3/32 10 102223996 01 142-O PACK
2 3/8
1 1/16 1/16 15 102220149 01 021-O PACK 2 5/8 1/8 10 102224169 01 229-O PACK
15/16 1 1/8 3/32 15 102224167 01 119-O PACK 2 3/4 3/16 10 102223256 01 332-O PACK
1 3/16 1/8 15 102222447 01 213-O PACK 2 7/16 2 5/8 3/32 10 102222442 01 143-O PACK
1 1/8 1/16 15 102220646 01 022-O PACK 2 5/8 1/16 10 102224076 01 037-O PACK
1 1 3/16 3/32 15 102220819 01 120-O PACK 2 11/16 3/32 10 102232760 01 144-O PACK
2 1/2
1 1/4 1/8 15 102223999 01 214-O PACK 2 3/4 1/8 10 102220092 01 230-O PACK
1 3/16 1/16 15 102223945 01 023-O PACK 2 7/8 3/16 10 102220160 01 333-O PACK
1 1/16 1 1/4 3/32 15 102218537 01 121-O PACK 2 9/16 2 3/4 3/32 10 102218539 01 145-O PACK
1 5/16 1/8 15 102222448 01 215-O PACK 2 3/4 1/16 6 102223946 01 038-O PACK
1 1/4 1/16 15 102220647 01 024-O PACK 2 13/16 3/32 10 102224416 01 146-O PACK
2 5/8
1 1/8 1 5/16 3/32 15 102220820 01 122-O PACK 2 7/8 1/8 10 102223326 01 231-O PACK
1 3/8 1/8 15 102232765 01 216-O PACK 3 3/16 10 102222452 01 334-O PACK
1 5/16 1/16 15 102219858 01 025-O PACK 2 11/16 2 7/8 3/32 10 102220088 01 147-O PACK
1 3/16 1 3/8 3/32 15 102223995 01 123-O PACK 2 7/8 1/16 6 102223947 01 039-O PACK
1 7/16 1/8 15 102232764 01 217-O PACK 2 15/16 3/32 10 102222943 01 148-O PACK
2 3/4
1 3/8 1/16 15 102224165 01 026-O PACK 3 1/8 10 102224424 01 232-O PACK
1 1/4 1 7/16 3/32 15 102222941 01 124-O PACK 3 1/8 3/16 10 102218768 01 335-O PACK
1 1/2 1/8 15 102224422 01 218-O PACK 2 13/16 3 3/32 10 102219862 01 149-O PACK
1 7/16 1/16 15 102223240 01 027-O PACK 3 1/16 6 102222437 01 040-O PACK
1 5/16 1 1/2 3/32 10 102224412 01 125-O PACK 3 1/16 3/32 10 102223949 01 150-O PACK
2 7/8
1 9/16 1/8 15 102222944 01 219-O PACK 3 1/8 1/8 10 102220825 01 233-O PACK
1 1/2 1/16 15 102219859 01 028-O PACK 3 1/4 3/16 10 102218767 01 336-O PACK
1 3/8 1 9/16 3/32 10 102222439 01 126-O PACK 3 1/8 1/16 6 102222438 01 041-O PACK
1 5/8 1/8 15 102223954 01 220-O PACK 3 3/16 3/32 10 102220822 01 151-O PACK
3
1 5/8 3/32 10 102220155 01 127-O PACK 3 1/4 1/8 10 102223327 01 234-O PACK
1 7/16
1 11/16 1/8 10 102222449 01 221-O PACK 3 3/8 3/16 10 102224432 01 337-O PACK
1 5/8 1/16 10 102232754 01 029-O PACK 3 3/8 1/8 10 102219863 01 235-O PACK
3 1/8
1 11/16 3/32 10 102218762 01 128-O PACK 3 1/2 3/16 4 102223254 01 338-O PACK
1 1/2
1 3/4 1/8 10 102220156 01 222-O PACK
1 7/8 3/16 10 102224430 01 325-O PACK Continued on next page.
394 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
Prepackaged O-Ring
Durometer: 70
Material: Nitrile Buna-N
I.D. O.D. Width Pkg. Qty. I.D. O.D. Width Pkg. Qty.
(in) (in) (in) (Pieces) Item No. Mfr. No. (in) (in) (in) (Pieces) Item No. Mfr. No.
3 3/8 1/16 6 102219860 01 042-O PACK 8 1/4 1/8 2 102224170 01 266-O PACK
8
3 7/16 3/32 10 102220821 01 152-O PACK 8 1/2 1/4 2 102220100 01 445-O PACK
3 1/4
3 1/2 1/8 8 102218764 01 236-O PACK 8 1/4 8 1/2 1/8 2 102220095 01 267-O PACK
3 5/8 3/16 4 102224173 01 339-O PACK 8 3/4 1/8 2 102224002 01 268-O PACK
8 1/2
3 5/8 1/8 8 102220824 01 237-O PACK 9 1/4 2 102224436 01 446-O PACK
3 3/8
3 3/4 3/16 4 102223330 01 340-O PACK 8 3/4 9 1/8 2 102223328 01 269-O PACK
3 5/8 1/16 6 102223948 01 043-O PACK 9 1/4 1/8 2 102224171 01 270-O PACK
9
3 11/16 3/32 10 102222444 01 153-O PACK 9 1/2 1/4 2 102220101 01 447-O PACK
3 1/2
3 3/4 1/8 8 102222450 01 238-O PACK 9 1/4 9 1/2 1/8 2 102222451 01 271-O PACK
3 7/8 3/16 4 102220218 01 341-O PACK 9 3/4 1/8 2 102220097 01 272-O PACK
9 1/2
3 7/8 1/8 8 102223248 01 239-O PACK 10 1/4 2 102224085 01 448-O PACK
3 5/8
4 3/16 4 102223959 01 342-O PACK 9 3/4 10 1/8 2 102223252 01 273-O PACK
3 7/8 1/16 6 102218536 01 044-O PACK 10 1/4 1/8 2 102224431 01 274-O PACK
10
3 15/16 3/32 10 102218763 01 154-O PACK 10 1/2 1/4 2 102222455 01 449-O PACK
3 3/4
4 1/8 8 102219866 01 240-O PACK 10 1/2 11 1/4 2 102223467 01 450-O PACK
4 1/8 3/16 4 102223956 01 343-O PACK 11 11 1/2 1/4 2 102224007 01 451-O PACK
4 1/8 1/8 8 102218765 01 241-O PACK 11 1/2 12 1/4 2 102224008 01 452-O PACK
3 7/8
4 1/4 3/16 4 102223957 01 344-O PACK 12 12 1/2 1/4 2 102222456 01 453-O PACK
4 1/8 1/16 6 102220084 01 045-O PACK 12 1/2 13 1/4 2 102220102 01 454-O PACK
4 4 1/4 1/8 6 102224000 01 242-O PACK 13 13 1/2 1/4 2 102223332 01 455-O PACK
4 3/8 3/16 4 102222453 01 345-O PACK 13 1/2 14 1/4 2 102224010 01 456-O PACK
4 3/8 1/8 6 102219864 01 243-O PACK 14 14 1/2 1/4 2 102224009 01 457-O PACK
4 1/8
4 1/2 3/16 4 102224433 01 346-O PACK 14 1/2 15 1/4 2 102223258 01 458-O PACK
4 1/2 1/8 6 102222946 01 244-O PACK 15 15 1/2 1/4 2 102223468 01 459-O PACK
4 1/4
4 5/8 3/16 4 102223255 01 347-O PACK 15 1/2 16 1/4 2 102224011 01 460-O PACK
4 5/8 1/8 6 102223250 01 245-O PACK
4 3/8
4 3/4 3/16 4 102223958 01 348-O PACK
4 3/4 1/8 4 102224425 01 246-O PACK
4 1/2 4 7/8
5
3/16
1/4
4
2
102223642
102224175
01 349-O PACK
01 425-O PACK
O-Ring Assortment
4 7/8 1/8 4 102220093 01 247-O PACK
4 5/8
5 1/8 1/4 2 102219872 01 426-O PACK
5 1/8 4 102232767 01 248-O PACK
4 3/4
5 1/4 1/4 2 102223257 01 427-O PACK
5 1/8 1/8 4 102220217 01 249-O PACK
4 7/8
5 3/8 1/4 2 102224005 01 428-O PACK
5 1/4 1/8 4 102220826 01 250-O PACK
5
5 1/2 1/4 2 102218769 01 429-O PACK
5 3/8 1/8 4 102224001 01 251-O PACK
5 1/8
5 5/8 1/4 2 102223643 01 430-O PACK
5 1/2 1/8 4 102223249 01 252-O PACK
5 1/4 Features:
5 3/4 1/4 2 102232768 01 431-O PACK
5 5/8 1/8 2 102223251 01 253-O PACK
• Reusable plastic kit offers easy identification access
5 3/8 • Popular, general-purpose elastomer with excellent oil resistance
5 7/8 1/4 2 102224006 01 432-O PACK
5 3/4 1/8 2 102224426 01 254-O PACK Includes:
5 1/2
6 1/4 2 102222948 01 433-O PACK • 382 o-rings in 30 of the most popular sizes, ranging from 006 through 327
5 7/8 1/8 2 102223955 01 255-O PACK
5 5/8
6 1/8 1/4 2 102218771 01 434-O PACK Material: Buna-N 70 Durometer Rubber
6 1/8 2 102224082 01 256-O PACK
5 3/4
6 1/4 1/4 2 102223331 01 435-O PACK
6 1/8 1/8 2 102222947 01 257-O PACK Item No. Mfr. No.
5 7/8 102196888 ORING KIT BUNA70
6 3/8 1/4 2 102232769 01 436-O PACK
6 1/4 1/8 2 102224427 01 258-O PACK
6
6 1/2 1/4 2 102222454 01 437-O PACK
6 1/2 1/8 2 102224428 01 259-O PACK
6 1/4
6 3/4 1/4 2 102220099 01 438-O PACK
6 3/4 1/8 2 102220094 01 260-O PACK
6 1/2
7
7
1/4
1/8
2
2
102224434
102220158
01 439-O PACK
01 261-O PACK
Still looking for
6 3/4
7
7 1/4
7 1/4
1/4
1/8
2
2
102220221
102219868
01 440-O PACK
01 262-O PACK something?
7 1/2 1/4 2 102224177 01 441-O PACK
7 1/2 1/8 2 102224429 01 263-O PACK
7 1/4
7 3/4 1/4 2 102224435 01 442-O PACK Visit Applied.com for a more
7 1/2
7 3/4
8
1/8
1/4
2
2
102219869
102223465
01 264-O PACK
01 443-O PACK
comprehensive offering.
8 1/8 2 102220096 01 265-O PACK
7 3/4
8 1/4 1/4 2 102223466 01 444-O PACK
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 395
Bearings
Single Lip With Spring Shaft Seal
Metric
Shaft Housing
Dia. Bore Dia. Width
(mm) (mm) (mm) Lip Material Style Item No. Mfr. No.
Fluoroelastomer - Viton CRW1 100914520 55X70X8CRW1V
70 8
Nitrile CRW1 101830076 55X70X8CRW1R
72 8 Nitrile CRW1 100747338 55X72X8CRW1R
55
80 8 Nitrile CRW1 101829611 55X80X8CRW1R
85 8 Nitrile CRW1 101829510 55X85X8CRW1R
90 8 Nitrile CRW1 100747340 55X90X8 CRW1 R
CRW1 CRWH1 CRS1
58 80 8 Fluoroelastomer - Viton CRW1 101876859 58X80X8CRW1V
Lip Style: Internal Fluoroelastomer - Viton CRW1 100914667 60X75X8CRW1V
Metric 75 8
Nitrile CRW1 101827114 60X75X8CRW1R
Shaft Housing Fluoroelastomer - Viton CRW1 101830264 60X80X8CRW1V
Dia. Bore Dia. Width 60 80 8
Nitrile CRW1 101901127 60X80X8CRW1R
(mm) (mm) (mm) Lip Material Style Item No. Mfr. No.
Fluoroelastomer - Viton CRW1 100747426 60X85X8CRW1V
22 7 Nitrile CRW1 100746484 12X22X7CRW1R 85 8
12 Nitrile CRW1 100747427 60X85X8CRW1R
25 7 Nitrile CRW1 100746485 12X25X7CRW1R 85 8 Nitrile CRW1 101832571 65X85X8CRW1R
28 7 Nitrile CRW1 100912710 15X28X7CRW1R 65
15 90 8 Nitrile CRW1 101826955 65X90X8CRW1R
35 7 Nitrile CRW1 100746512 15X35X7CRW1R 70 90 10 Fluoroelastomer - Viton CRW1 101783138 70X90X10CRW1V
Fluoroelastomer - Viton CRW1 100912791 17X28X7CRW1V 95 10 Nitrile CRW1 101827985 75X95X10CRW1R
28 7 75
Nitrile CRW1 101944936 17X28X7CRW1R 100 10 Nitrile CRW1 101830557 75X100X10CRW1R
17 30 7 Nitrile CRW1 101828006 17X30X7CRW1R 100 10 Nitrile CRW1 100747748 80X100X10CRW1R
40 7 Nitrile CRW1 100746545 17X40X7 CRW1 R 80
105 10 Nitrile CRW1 100914987 80X105X10CRW1R
47 7 Nitrile CRW1 100912812 17X47X7CRW1R 110 10 Nitrile CRW1 100915036 85X110X10CRW1R
30 7 Nitrile CRW1 100746584 20X30X7CRW1R 85
120 12 Nitrile CRW1 101829609 85X120X12CRW1R
32 7 Nitrile CRW1 101783700 20X32X7CRW1R 90 110 12 Nitrile CRW1 101828522 90X110X12CRW1R
35 7 Nitrile CRW1 101829613 20X35X7CRW1R 7915 100 120 12 Nitrile CRW1 100747918 100X120X12CRW1R
20
37 7 Nitrile CRW1 101876838 20X37X7CRW1R 105 130 12 Nitrile CRW1 100747969 105X130X12CRW1R
47 7 Nitrile CRW1 101830554 20X47X7CRW1R 125 150 12 Fluoroelastomer - Viton CRW1 100915337 125X150X12CRW1V
52 7 Nitrile CRW1 100912944 20X52X7CRW1R
22 35 7 Nitrile CRW1 100746604 22X35X7CRW1R
35 7 Nitrile CRW1 101828577 25X35X7CRW1R
38 7 Nitrile CRW1 101828513 25X38X7CRW1R
Inch
40 7 Nitrile CRW1 100746647 25X40X7 CRW1 R Shaft Housing
25 42 8 Nitrile CRW1 100746649 25X42X8CRW1R Dia. Bore Dia. Width
47 6.35 Nitrile CRW1 101828510 25X47X6.3CRW1R (in) (in) (in) Lip Material Style Item No. Mfr. No.
52 8 Nitrile CRW1 101829518 25X52X8CRW1R 0.25 0.749 0.25 Nitrile CRW1 100912530 2514
62 7 Nitrile CRW1 101832561 25X62X7CRW1R 0.749 0.25 Nitrile CRW1 100000701 3687
0.375
40 7 Nitrile CRW1 100746696 28X40X7CRW1R 0.999 0.25 Nitrile CRW1 100746471 3725
28 42 7 Nitrile CRW1 100913214 28X42X7CRW1R 0.438 0.999 0.375 Nitrile CRW1 100000702 4355
47 7 Fluoroelastomer - Viton CRW1 100746697 28X47X7CRW1V 0.875 0.25 Nitrile CRW1 100000704 4931
40 7 Nitrile CRW1 101830553 30X40X7CRW1R 0.999 0.25 Nitrile CRW1 100746493 4984
0.5
Fluoroelastomer - Viton CRW1 101876850 30X42X7CRW1V 1.124 0.25 Nitrile CRW1 100746498 5068
42 7 1.375 0.25 Nitrile CRW1 100746500 5150
Nitrile CRW1 101827581 30X42X7CRW1R
30 45 8 Nitrile CRW1 101830545 30X45X8CRW1R 0.999 0.25 Nitrile CRW1 100746505 5541
47 7 Nitrile CRW1 101826994 30X47X7CRW1R 0.563 1.124 0.25 Nitrile CRW1 100746509 5652
52 8 Nitrile CRW1 101828530 30X52X8CRW1R 1.25 0.25 Nitrile CRW1 100746510 5707
72 8 Nitrile CRW1 101830062 30X72X8CRW1R 1 0.25 Nitrile CRW1 100746520 6143
47 8 Nitrile CRW1 101827420 32X47X8CRW1R 0.625 1.124 0.25 Nitrile CRW1 100000709 6903
32 1.375 0.25 Nitrile CRW1 100746534 6372
52 8 Nitrile CRW1 100746794 32X52X8CRW1R
47 7 Nitrile CRW1 100746861 35X47X7 CRW1 R 0.669 0.999 0.188 Nitrile CRW1 100912786 6595
52 8 Nitrile CRW1 101832578 35X52X8CRW1R 1.124 0.25 Nitrile CRW1 100746548 6741
0.688
35 55 8 Nitrile CRW1 100746867 35X55X8CRW1R 1.188 0.188 Nitrile CRW1 100746551 6763
62 8 Nitrile CRW1 100746870 35X62X8CRW1R 1.124 0.188 Nitrile CRW1 100000715 7414
80 8 Nitrile CRW1 101825818 35X80X8CRW1R 1.25 0.188 Nitrile CRW1 100746565 7439
36 52 8 Nitrile CRW1 100913616 36X52X8CRW1R 1.312 0.25 Nitrile CRW1 100000721 7474
Fluoroelastomer - Viton CRW1 100746965 40X52X7 CRW1 V 1.375 0.25 Nitrile CRW1 100000722 7512
52 7 0.75 1.499 0.25 Nitrile CRW1 100746575 7572
Nitrile CRW1 100746966 40X52X7 CRW1 R
40 55 8 Nitrile CRW1 100746969 40X55X8 CRW1 R 1.624 0.25 Nitrile CRW1 100746576 7627
58 8 Nitrile CRW1 101830548 40X58X8CRW1R 1.752 0.25 Nitrile CRW1 100000727 7636
62 8 Nitrile CRW1 101832556 40X62X8CRW1R 1.874 0.25 Nitrile CRW1 100000728 7690
42 56 8 Nitrile CRW1 100747018 42X56X8CRW1R 2.047 0.313 Nitrile CRW1 100746579 7693
44 62 8 Nitrile CRW1 100747061 44X62X8CRW1R 0.781 1.375 0.313 Nitrile CRW1 100746582 7829
Fluoroelastomer - Viton CRW1 101828926 45X60X8CRW1V 1.25 0.188 Nitrile CRW1 100746594 8017
60 8 0.813 1.375 0.375 Nitrile CRW1 100746596 8060
Nitrile CRW1 101828519 45X60X8CRW1R
62 8 Nitrile CRW1 100000897 45X62X8CRW1R 1.499 0.25 Nitrile CRW1 100746598 8088
45 Fluoroelastomer - Viton CRW1 100914144 45X65X8 CRW1 V 1.25 0.188 Nitrile CRW1 100000731 8624
65 8 1.375 0.25 Nitrile CRW1 100000732 8648
Nitrile CRW1 101828219 45X65X8CRW1R
68 8 Fluoroelastomer - Viton CRW1 100914145 45X68X8CRW1V 0.875 1.499 0.25 Nitrile CRW1 100746615 8700
75 8 Nitrile CRW1 101825822 45X75X8CRW1R 1.624 0.25 Nitrile CRW1 100746621 8796
48 62 8 Nitrile CRW1 100747187 48X62X8CRW1R 1.874 0.25 Nitrile CRW1 100746624 8860
Fluoroelastomer - Viton CRW1 101829528 50X65X8CRW1V 1.5 1.5 Nitrile CRW1 100746628 9303
65 8
Nitrile CRW1 100000918 50X65X8CRW1R 0.938 1.624 1.624 Nitrile CRW1 100746629 9307
50 Fluoroelastomer - Viton CRW1 100914342 50X68X8CRW1V 1.752 1.752 Nitrile CRW1 100746631 9347
68 8
Nitrile CRW1 100747233 50X68X8CRW1R
70 8 Nitrile CRW1 101827427 50X70X8CRW1R Continued on next page.
396 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 397
Bearings
Continued from previous page.
398 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Single Lip Without Spring Shaft Seal
Applications:
• Install with lip facing outward for maximum dirt exclusion
• Conveyor rollers and vehicle wheels
Caution:
• Not generally for oil retention
Lip Style: Internal
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 399
Bearings
Rubber Covered Single Lip
Dual Lip Shaft Seal without Spring Shaft Seal with Spring
Applications:
• Install with lip facing outward for maximum dirt exclusion
• Conveyor rollers and vehicle wheels
Caution: HMS1 HMS4 HMS5
• Not generally for oil retention
Metric
Housing
Shaft Bore
Dia. Dia. Width
(mm) (mm) (mm) Material Style Item No. Mfr. No.
8 22 7 Nitrile HMS5 100912554 8X22X7HMS5RG
19 7 Nitrile HMS5 100912578 10X19X7HMS5RG1
10 22 7 Nitrile HMS5 102185266 10X22X7HMS5RG
26 7 Nitrile HMS5 100912586 10X26X7HMS5RG
Rubber Covered Dual Lip Shaft Seal with Spring 12 25 4.5 Nitrile HMS4 100912618 12X25X4.5HMS4R
24 5 Nitrile HMS4 101828957 15X24X5HMS4R
15 30 7 Nitrile HMS5 100912713 15X30X7 HMS5 RG
35 7 Nitrile HMS5 100912722 15X35X7 HMS5 RG
30 7 Nitrile HMS5 100912797 17X30X7 HMS5 RG
17 35 7 Nitrile HMS5 100912805 17X35X7HMS5RG
40 7 Nitrile HMS5 100912809 17X40X7HMS5RG
19 32 7 Nitrile HMS5 100746580 19X32X7HMS5RG
32 7 Nitrile HMS5 100912918 20X32X7HMS5RG
35 7 Nitrile HMS5 100912921 20X35X7HMS5RG
20
40 7 Nitrile HMS5 100912931 20X40X7HMS5RG
47 7 Nitrile HMS5 100912941 20X47X7 HMS5 RG
HMSA7 HMSA10 22 35 7 Nitrile HMS5 100912979 22X35X7HMS5RG
24 40 7 Nitrile HMS5 100913051 24X40X7HMS5RG
35 7 Nitrile HMS5 100913077 25X35X7 HMS5 RG
38 7 Nitrile HMS5 100913085 25X38X7HMS5RG
Inch Lip Style: Internal
Fluoroelastomer - Viton HMS5 100913074 25X40X7HMS5V
40 7
Nitrile HMS5 100913088 25X40X7 HMS5 RG
Shaft Housing 25
Dia. Bore Dia. Width 42 7 Nitrile HMS5 100746648 25X42X7HMS5RG
(in) (in) (in) Material Style Item No. Mfr. No. 47 7 Nitrile HMS5 100913147 25X47X7HMS5RG
1 2.441 3/8 Nitrile HMSA7 100746685 10178 52 7 Nitrile HMS5 100913107 25X52X7 HMS5 RG
1.25 2.835 3/8 Nitrile HMSA7 100000802 12668 62 10 Nitrile HMS5 100913125 25X62X10HMS5RG
1.281 2 3/8 Nitrile HMSA7 100746798 12830 26 40 8 Nitrile HMS1 101827789 26X40X8HMS1R
28 38 7 Nitrile HMS5 101422813 28X38X7HMS5RG
40 7 Nitrile HMS5 100913289 30X40X7 HMS5 RG
42 7 Nitrile HMS5 100913292 30X42X7 HMS5 RG
Metric 45 8 Nitrile HMS5 100913300 30X45X8 HMS5 RG
Shaft Housing 7 Nitrile HMS5 100913301 30X47X7 HMS5 RG
30 47
Dia. Bore Dia. Width 10 Nitrile HMS5 100913305 30X47X10HMS5RG
(mm) (mm) (mm) Material Style Item No. Mfr. No. 50 7 Nitrile HMS5 100913307 30X50X7HMS5RG
14 24 6 Nitrile HMSA7 100912677 14X24X6HMSA7R 52 7 Nitrile HMS5 100913313 30X52X7HMS5RG
15 24 7 Nitrile HMSA10 100912704 15X24X7HMSA10RG1 62 7 Nitrile HMS5 100913326 30X62X7HMS5RG
22 35 7 Nitrile HMSA10 100912982 22X35X7 HMSA10 RG 47 7 Nitrile HMS5 100913423 32X47X7HMS5RG
32
35 7 Nitrile HMSA10 100913078 25X35X7HMSA10RG 52 7 Nitrile HMS5 100913429 32X52X7 HMS5 RG
47 7 Nitrile HMSA10 100913097 25X47X7HMSA10RG 45 7 Nitrile HMS5 100913558 35X45X7HMS5RG
25
52 7 Nitrile HMSA10 100913111 25X52X7 HMSA10 RG 47 7 Nitrile HMS5 100913562 35X47X7 HMS5 RG
62 7 Nitrile HMSA10 100913122 25X62X7HMSA10RG 52 7 Nitrile HMS5 100913571 35X52X7HMS5RG
30 47 7 Nitrile HMSA10 100913302 30X47X7HMSA10RG 35 55 8 Nitrile HMS5 100913596 35X55X8HMS5RG
47 7 Nitrile HMSA10 100913568 35X47X7HMSA10RG 7 Nitrile HMS5 100913581 35X62X7 HMS5 RG
35 62
52 7 Nitrile HMSA10 100913560 35X52X7HMSA10RG 10 Nitrile HMS5 100746876 35X62X10 HMS5 RG
55 8 Nitrile HMSA10 100913865 40X55X8HMSA10RG 72 10 Nitrile HMS5 100913601 35X72X10 HMS5 RG
40
62 7 Nitrile HMSA10 100746977 40X62X7HMSA10RG
50 72 8 Nitrile HMSA10 100914367 50X72X8HMSA10RG
75 95 8 Nitrile HMSA7 100914930 75X95X8HMSA7R Continued on next page.
400 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
V-Rings
Rubber Covered Single Lip
Shaft Seal with Spring All rubber, single element, press on shaft (in or mm) and pushed to fitted width.
Metric
Shaft Housing Features:
Dia. Bore Dia. Width • Seals for dirt exclusion
(mm) (mm) (mm) Material Style Item No. Mfr. No. • Will run against metal
36 47 7 Nitrile HMS5 100913606 36X47X7HMS5RG
case of seal or housing
50 7 Nitrile HMS5 100913704 38X50X7HMS5RG
• Hand fitted, no housing
38 required
55 7 Nitrile HMS5 100913712 38X55X7 HMS5 RG
52 7 Nitrile HMS5 100913859 40X52X7 HMS5 RG
55 7 Nitrile HMS5 100913862 40X55X7 HMS5 RG VR1 VR2
Inch Lip Style: External
7 Nitrile HMS5 100913878 40X62X7HMS5RG
40 62
10 Nitrile HMS5 100913879 40X62X10HMS5RG Min. Max.
72 7 Fluoroelastomer - Viton HMS5 100913889 40X72X7HMS5V Shaft Shaft Fitted
80 10 Nitrile HMS5 100913897 40X80X10HMS5RG Dia. Dia. Width
42 62 8 Nitrile HMS5 100747024 42X62X8 HMS5 RG (in) (in) (in) Design Material Item No. Mfr. No.
62 8 Nitrile HMS5 100914157 45X62X8 HMS5 RG 0.177 0.217 0.120 VR1 NBR 100916060 400054
45 0.217 0.256 0.118 VR1 NBR 100916062 400060
65 8 Nitrile HMS5 100914136 45X65X8 HMS5 RG
65 8 Nitrile HMS5 100914335 50X65X8 HMS5 RG 0.374 0.453 0.177 VR1 NBR 100916074 400100
68 8 Nitrile HMS5 100914346 50X68X8 HMS5 RG 0.610 0.689 0.177 VR1 NBR 100916088 400160
50 0.610 0.669 0.180 VR1 NBR 100916090 400164
72 8 Nitrile HMS5 100914362 50X72X8 HMS5 RG
80 8 Nitrile HMS5 100747246 50X80X8 HMS5 RG 0.748 0.827 0.236 VR1 NBR 100748247 400200
55 72 8 Nitrile HMS5 100914526 55X72X8HMS5RG 0.827 0.945 0.236 VR1 NBR 100916098 400220
80 8 Nitrile HMS5 102187449 60X80X8HMS5RG 0.945 1.063 0.236 VR1 NBR 100748249 400250
60 85 8 Nitrile HMS5 100914679 60X85X8 HMS5 RG 1.063 1.142 0.236 VR1 NBR 100916105 400280
90 10 Nitrile HMS5 100914687 60X90X10HMS5RG 1.142 1.220 0.354 VR2 NBR 100916109 400301
85 10 Nitrile HMS5 100914783 65X85X10HMS5RG 1.220 1.299 0.236 VR1 NBR 100916112 400320
65 0.236 VR1 NBR 100916119 400380
90 10 Nitrile HMS5 100914786 65X90X10 HMS5 RG 1.417 1.496
70 90 10 Nitrile HMS5 100914872 70X90X10 HMS5 RG 0.354 VR2 NBR 100916120 400381
75 95 10 Nitrile HMS5 100914925 75X95X10HMS5RG 0.276 VR1 NBR 100748252 400400
1.496 1.693
80 100 10 Nitrile HMS5 100914984 80X100X10 HMS5 RG 0.433 VR2 NBR 100748254 400401
85 110 12 Nitrile HMS5 100747787 85X110X12HMS5RG 1.693 1.890 0.276 VR1 NBR 100748255 400450
1.890 2.087 0.276 VR1 NBR 100916126 400500
0.276 VR1 NBR 100748257 400550
2.087 2.283
0.433 VR2 NBR 100748258 400551
2.283 2.480 0.276 VR1 NBR 100748260 400600
2.480 2.677 0.276 VR1 NBR 100748262 400650
Rubber Covered Single Lip 2.677 2.874 0.354 VR1 NBR 100748265 400700
Shaft Seal without Spring 2.874 3.071 0.354 VR1 NBR 100748267 400750
3.071 3.268 0.354 VR1 NBR 100748295 400800
3.858 4.134 0.354 VR1 NBR 100748274 401000
4.134 4.528 0.413 VR1 NBR 100916151 401100
5.315 5.709 0.413 VR1 NBR 100748279 401400
Caution:
• Not generally for oil retention
HM3 HM8
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 401
Bearings
Speedi-Sleeve® Replacement Shaft Wear Sleeve Cored Bronze Bars SAE 660 (CDA932)
CDA932 cored and solid bars are the most commonly used
bearing alloys, found in bearings operating at moderate loads
and moderate-to-high speeds, as in electric motors and
appliances.
Bar Stock Length: 13 in
I.D. O.D.
(in) (in) Item No. Mfr. No.
Features: 1 101786962 BC0408-13BRZ BAR
• Outside surface forms an ideal sealing surface 1 1/4 101965160 BC0410-13BRZ BAR
• Cost-effective alternative to resizing, metalizing or replacing a severely damaged 1/2 1 1/2 101949239 BC0412-13BRZ BAR
surface 1 3/4 101976442 BC0414-13BRZ BAR
2 101953791 BC0416-13BRZ BAR
Inch
1 101976446 BC0508-13BRZ BAR
Nominal Min. Max. 5/8 1 1/4 101954334 BC0510-13BRZ BAR
Shaft Shaft Shaft Total 1 3/8 101963810 BC0511-13BRZ BAR
Size Size Size Width 1 101954235 BC0608-13BRZ BAR
(in) (in) (in) (in) Item No. Mfr. No.
1 1/4 101983515 BC0610-13BRZ BAR
0.750 0.748 0.752 0.438 101566692 99076 1 3/8 101949668 BC0611-13BRZ BAR
0.875 0.873 0.877 0.438 101591316 99087 1 1/2 101954239 BC0612-13BRZ BAR
1.000 0.998 1.003 0.438 105975533 99868 3/4
1 3/4 101954625 BC0614-13BRZ BAR
1.125 1.123 1.128 0.438 101570340 99112 2 101954626 BC0616-13BRZ BAR
1.250 1.247 1.253 0.438 101563081 99125 2 1/4 101983523 BC0618-13BRZ BAR
1.375 1.371 1.377 0.625 101563080 99138 2 1/2 101983524 BC0620-13BRZ BAR
1.500 1.497 1.503 0.688 101570330 99149 1 1/2 101969998 BC0712-13BRZ BAR
1.625 1.622 1.628 0.688 101564243 99162 7/8 1 3/4 101951501 BC0714-13BRZ BAR
1.750 1.747 1.753 0.875 101566697 99175 2 101949675 BC0716-13BRZ BAR
1.875 1.872 1.878 0.688 101570519 99187 1 1/4 101953802 BC0810-13BRZ BAR
0.688 101567894 99199 1 1/2 101954348 BC0812-13BRZ BAR
2.000 1.997 2.003
1.000 101565278 99200 1 5/8 101964163 BC0813-13BRZ BAR
2.250 2.249 2.255 0.938 101564754 99225 1 3/4 101954631 BC0814-13BRZ BAR
2.375 2.374 2.380 0.938 101564756 99237 2 101954249 BC0816-13BRZ BAR
2.500 2 1/2 2.507 0.938 101564247 99250 1
2 1/4 101954252 BC0818-13BRZ BAR
2.625 2 5/8 2.632 0.938 101562958 99262 2 1/2 101874258 BC0820-13BRZ BAR
2.875 2.873 2.880 0.938 101564761 99287 3 102223718 BC0824-13BRZ BAR
2.938 2.937 2.944 0.938 101569100 99293 3 1/2 101873380 BC0828-13BRZ BAR
3.000 3 3.007 1.000 101591312 99300 4 101882679 BC0832-13BRZ BAR
3.250 3 1/4 3.257 1.000 101563963 99325 1 5/8 101882339 BC0913-13BRZ BAR
3.938 3.935 3.942 1.000 101570338 99393 1 1/8
2 101882480 BC0916-13BRZ BAR
5.000 4.998 5.007 1.000 101564251 99499 1 1/2 101883556 BC1012-13BRZ BAR
1 5/8 101882484 BC1013-13BRZ BAR
Metric
1 3/4 101872824 BC1014-13BRZ BAR
Nominal Min. Max. 2 101882488 BC1016-13BRZ BAR
Shaft Shaft Shaft Total 1 1/4 2 1/4 101883344 BC1018-13BRZ BAR
Size Size Size Width 2 1/2 101882997 BC1020-13BRZ BAR
(mm) (mm) (mm) (mm) Item No. Mfr. No.
3 101874465 BC1024-13BRZ BAR
30 29.950 30.070 11.000 101570344 99114 3 1/4 101884547 BC1026-13BRZ BAR
35 34.925 35.077 16.000 101563086 99139 4 101882577 BC1032-13BRZ BAR
40 39.929 40.081 16.000 101565275 99157 1 7/8 101874468 BC1115-13BRZ BAR
50 49.910 50.060 17.000 101564767 99196 2 101883788 BC1116-13BRZ BAR
54 53.950 54.102 24.000 101567720 99212 1 3/8
2 1/4 101872827 BC1118-13BRZ BAR
55 54.910 55.070 22.987 101564550 99215 2 1/2 101873130 BC1120-13BRZ BAR
89 88.900 89.078 25.000 101562959 99350 1 3/4 101873134 BC1214-13BRZ BAR
1 7/8 101872742 BC1215-13BRZ BAR
2 101882503 BC1216-13BRZ BAR
2 1/4 101882504 BC1218-13BRZ BAR
2 1/2 101874472 BC1220-13BRZ BAR
You Need?
3 1/4 101883791 BC1226-13BRZ BAR
3 1/2 101873396 BC1228-13BRZ BAR
4 101873397 BC1232-13BRZ BAR
4 1/2 101873398 BC1236-13BRZ BAR
Need something not shown in the catalog? 2 1/4 101884555 BC1418-13BRZ BAR
2 3/8 101884305 BC1419-13BRZ BAR
Applied Industrial Technologies has a wide 2 1/2 101884139 BC1420-13BRZ BAR
range of supplies to meet your needs. 2 5/8 101883795 BC1421-13BRZ BAR
1 3/4 2 3/4 101884557 BC1422-13BRZ BAR
Give us a call, and we’ll be happy 3 101882592 BC1424-13BRZ BAR
to assist you! 3 1/4
3 1/2
101884559
101884308
BC1426-13BRZ BAR
BC1428-13BRZ BAR
4 101884371 BC1432-13BRZ BAR
Continued on next page.
402 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 403
Bearings
SAE 863 Sintered Iron/Copper Oil
Impregnated Cored Bar Stock
Solid Bronze Bars SAE 660 (CDA932)
CDA932 cored and solid bars are the most commonly used bearing alloys, found in
bearings operating at moderate loads and moderate-to-high speeds, as in electric
motors and appliances.
Features:
• ISO 9001:2008 registered
• Made in the USA
• Complies with RoHS restrictions on the Features:
use of certain hazardous substances in • 18% to 22% copper, balance iron
electrical and electronic equipment • Good porous grade bearing material
• Great for applications requiring higher static loads
Bar Stock Length: 13 in • Vacuum impregnated with 100 grade R & O Turbine/Hydraulic Oil
• Made in the USA
O.D.
(in) Item No. Mfr. No.
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
1/2 101922097 BS0004-13BRZ BAR • ISO 9001:2015 registered
5/8 101883188 BS0005-13BRZ BAR • REACH compliant
3/4 101883854 BS0006-13BRZ BAR • ISO 14001:2015 registered
7/8 101922335 BS0007-13BRZ BAR • CA Prop 65 compliant Bar Stock Length: 5 in
1 101921604 BS0008-13BRZ BAR
1 1/8 101883916 BS0009-13BRZ BAR I.D. O.D.
1 1/4 101983499 BS0010-13BRZ BAR (in) (in) Item No. Mfr. No.
1 3/8 101922337 BS0011-13BRZ BAR 1 101529775 FCCS-1000
1/2
1 1/2 101922803 BS0012-13BRZ BAR 1 7/16 101529776 FCCS-1402
1 3/4 101922247 BS0014-13BRZ BAR 1 3/16 101531597 FCCS-1102
3/4
2 101883917 BS0016-13BRZ BAR 1 15/16 101556432 FCCS-1900
2 1/4 101884501 BS0018-13BRZ BAR 1 1 11/16 101556428 FCCS-1601
2 1/2 101921609 BS0020-13BRZ BAR 1 11/16 101548435 FCCS-1602
3 101922103 BS0024-13BRZ BAR 1 1/4 2 3/16 101526096 FCCS-2103
3 1/2 101921860 BS0028-13BRZ BAR 2 7/8 101539945 FCCS-2803
4 101883620 BS0032-13BRZ BAR 1 1/2 1 15/16 101532177 FCCS-1904
4 1/2 101921952 BS0036-13BRZ BAR 2 1/2 101556433 FCCS-2504
1 3/4
5 101922345 BS0040-13BRZ BAR 3 101529008 FCCS-3004
5 1/2 101921862 BS0044-13BRZ BAR 2 5/8 101565230 FCCS-2600
2
6 101922193 BS0048-13BRZ BAR 3 101530357 FCCS-3005
3 3/8 101565233 FCCS-3301
2 1/2
4 1/8 101760833 FCCS-4102
3 4 7/8 102149074 FCCS4802
All Symmco bars will finish to dimensions shown.
404 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
SAE 841 Sintered Bronze Oil
Impregnated Solid Bar Stock
Features:
• High grade, porous bronze material for your part specific machining needs
• Good porosity and oil content
• Vacuum impregnated with 100 grade R & O Turbine/Hydraulic Oil
• Can be machined into bearings that will provide uniform oil coating directly to the shaft, eliminating the need for
costly oil grooves or added grease
• Made in the USA
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• ISO 9001:2015 registered
• RoHS DRC “Conflict Free”
• REACH compliant
• ISO 14001:2015 registered
• CA Prop 65 compliant
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 405
Bearings
Bearings that
are up to the
challenge.
High quality bearings for superior reliability,
performance and service life in industrial,
commercial and niche applications.
The SKF advantage:
• Unmatched range for all industries and applications
• Ideal for critical and non-critical machinery, high
precision and heavy-duty requirements
• Designed to run faster, cooler, smoother, quieter
and longer
• Highly engineered, innovative designs and superior quality
• Application engineering assistance across the full life cycle
• Ideal for applications where machinery can be rebuilt or repaired
406 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Bearings
—
Safer food
Comes from safer designs
To ensure uptime and safe food production, don’t let bearings be the weak link in your
process. Dodge® Food Safe bearings are the first to achieve IP69 for water protection
rating without the use of an end cover and be warranted against failure due to water
ingress; making them ideal in environments where equipment must be aggressively
cleaned. Dodge Food Safe bearings improve reliability of clean-in place procedures and
provide you, and your customers, with the safe production you expect.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 407
Bearings
BEARING MAINTENANCE
AND FUNDAMENTALS
Practical, Hands-On Training!
Power your productivity with training courses from Applied Industrial Technologies! Our MaintenancePRO® training program is
the single best investment you can make towards increasing uptime at your facility.
Bearing Maintenance and Fundamentals teaches the essential skills you need to perform
preventative maintenance on bearings and troubleshoot common problems.
408 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Hand, Power
Applied Industrial Technologies 1
& Analytical Tools
Power Transmission
Safety 2
Products
Lubrication
Products 3
& Equipment
Industrial Chemicals 4
& Coatings
Janitorial 5
Products
General
Industrial 6
Products
Bearings 7
Power
Transmission 8
Pneumatic 9
Products
Hydraulic 10
Products
Industrial Hose,
Valves & Process 11
Equipment
Service Center
Directory
Power Transmission
Conti® SYNCHROCHAIN CARBON is the solution. It’s more energy efficient and
lowers maintenance costs because it never needs oiling or re-tensioning. Let’s talk
soon for an option that’s a real gem. Visit continental-industry.com for more.
For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
21/22
Belt Drive Components Guide Rails & Hardware.............................................496-499
Conveyor Hooks, Lacing & Fasteners................................475-477 Motors, Controls & Accessories
Skirtboarding..........................................................................475 Bearing Protection Rings & Accessories...........................424-425
Splicing Kits............................................................................558 Electric.............................................................................410-423
V-Belts....................................................................................575 Gearmotors........................................................419,426-427,429
Belts Motor Bases.....................................................................423-424
HTD...........................................................................566-568,571 Motor Multipliers....................................................................433
Premium Synchronous.....................................................574-575 NEMA Premium® Motors.....................412,414-415,418,420,423
Timing............................................................... 563-565,574-575 Shaft Conductivity Coatings....................................................425
V-Belts................................................ 544-548,550-558,575-576 Speed Controls.................................................................428-430
Bushings Open Gears, Spur.........................................................478-479
Idler..........................................................................539,541,543 Oscillioscopes...................................................................... 425
QD...................................................................................540-541 Shaft Couplings
Self-Locking Ring Elements..............................................441-448 Chain...............................................................................471,474
Shrink Discs.............................................................................448 Flexible............................................................. 456-457,459-469
Split Taper........................................................................542-543 Gear........................................................................................470
Taperlock.........................................................................536-539 Grid..................................................................................472-474
Chain Jaw...........................................................................456-457,460
Roller Chain & Connecting Links...............................471,481-493 Miniature.........................................................................458-460
Sprockets.......................................................... 499-527,532-534 Rigid................................................................................450-455
Tabletop...........................................................................493-496 Shafting, Linear............................................................477-478
Clutches & Brakes Sheaves
Electrical..........................................................................429-430 FHP Bushed Sheaves...............................................................544
Mechanical...............................................................439,449-450 HTD Belt Sprockets.............................. 529-532,565-566,569-570
Drive Tensioners & Tighteners.................. 527-529,534-536 Premium Synchronous Belt Sprockets...529-532,569-570,572-573
Gear Reducers & Accessories QD Sheaves......................................................................546,549
Accessories......................................... 433-436,438-440,478-481 Split Taper Sheaves.................................................................544
Bevel.......................................................................................431 Timing Pulleys..................................................................560-562
Helical.....................................................................................436 Variable Pitch Sheaves.....................................................559-560
Inline.......................................................................................436 Universal Joints...................................................................441
Shaft Mount............................................................................437 Voltage Testers....................................................................425
Worm................................................................ 431-435,437-438
Applied Industrial Technologies sells products for INDUSTRIAL or COMMERCIAL use only.
CA Proposition 65
Certain products can expose you to chemicals which are known to the State of California to cause
cancer and birth defects or reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Please see on-product warning for specific information.
Features:
• Meets or exceeds NEMA Premium® efficiencies
• Four-in-one motor features allow multiple mounting options
• CR200 corona resistant magnet wire for use with variable frequency drives
• Suitable for horizontal and vertical mounting
• Will accept drip cover kits
• 56-145T frame motors will accept brake kits Phase: Three Phase
• UL® recognized, CSA certified and “CE” mark Service Factor: 1.15
410 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
MARATHON® / LEESON® Globetrotter® General Purpose Motor ®
Features:
• Meets or exceeds NEMA Premium® efficiencies
• Cast iron frame material
• Hazardous Duty Division 2 UL® certification nameplate
• Division 2 / Zone 2 Class 1 (gases), Groups A, B, C, D, meets temperature code T2B
• IP55 enclosure
• Standard assembly F1, reversible to F2 assembly
• UL® recognized, CSA certified, “CE” mark
RPM Enclosure HP Frame Material Item No. Mfr. No. RPM Enclosure HP Frame Material Item No. Mfr. No.
Cast Iron 117585857 143TTFBD6028 1.5 Cast Iron 117585861 145TTFCD6026
1
Rolled Steel 117585895 143TTFR6032a 2 Cast Iron 117585862 145TTFCD6027
Cast Iron 117585860 145TTFBD6038 3 Cast Iron 115559528 182TTFCD6026
1.5
Rolled Steel 117585897 145TTFR6058a 5 Cast Iron 115559548 184TTFCD6026
Cast Iron 117585859 145TTFBD6028 1800 TEFC 7.5 Cast Iron 115559807 213TTFCD6026
2
Rolled Steel 117585899 145TTFR6040 10 Cast Iron 115281996 215TTFCD6026
1800 TEFC 3 Rolled Steel 115559523 182TTFBD6028 15 Cast Iron 115559605 254TTFCD6026
5 Rolled Steel 115559545 184TTFBD6028 20 Cast Iron 115559623 256TTFCD6026
7.5 Rolled Steel 115559564 213TTFBD6028 25 Cast Iron 115559642 284TTFCD6026
10 Rolled Steel 115559585 215TTFBD6028 3 Cast Iron 115559527 182TTFCD6001
15 Cast Iron 115559606 254TTFCD6028 5 Cast Iron 115559547 184TTFCD6001
20 Cast Iron 115559624 256TTFCD6028 7.5 Cast Iron 115559568 213TTFCD6001
25 Cast Iron 115559643 284TTFCD6028 3600 TEFC 10 Cast Iron 115559589 215TTFCD6001
Cast Iron 117585856 143TTFBD6003 15 Cast Iron 115559601 254TTFCD6001
1.5
Rolled Steel 117585896 143TTFR6010a 20 Cast Iron 115559619 256TTFCD6001
Cast Iron 117585858 145TTFBD6003 25 Cast Iron 115559630 284TSTFCD6001
2
Rolled Steel 117585898 145TTFR6009a
3 Rolled Steel 115559519 182TTFBD6003
a
IP43 protection; not UL® certified for Hazardous Div 2. Rolled steel fram construction,
3600 TEFC 5 Rolled Steel 115559541 184TTFBD6003 F1 only.
7.5 Rolled Steel 115559560 213TTFBD6003
10 Rolled Steel 115559581 215TTFBD6003
15 Cast Iron 115559602 254TTFCD6003
20 Cast Iron 115559620 256TTFCD6003
25 Cast Iron 115559631 284TSTFCD6003
Features:
• Rolled steel frame
• Class F insulation, class B rise at full load on 60 hz sine wave power
• “CE” mark on nameplate
• Shaft slinger on pulley end
• 40 °C ambient, NEMA design B performance on 60 hz sine wave power
• Sealed bearings (140 frame); Double shielded bearings (180 frame and up)
• Dual voltage ratings suitable for part winding start (PWS) on low voltage
• For use on pumps, fans, compressors, material handling and other general purpose applications in damp, dusty or dirty environments
HP RPM Voltage Frame Item No. Mfr. No. HP RPM Voltage Frame Item No. Mfr. No.
1/4 1200 208-230/460 56C 101677633 U14S3AC 1800 200 145TC 102449768 U32P2HC
1/3 1200 208-230/460 56C 101677632 U13S3AC 1 1/2 56C 112936249 U32P1DFCa
3600 208-230/460
1/2 1200 208-230/460 56C 101678730 U12S3AC 143TC 101666835 U32P1DCa
56C 101680897 U34S3AC 1800 208-230/460 56C 112905985 U2P2DFCa
3/4 1200 208-230/460
143TC 101682427 U34S3DC 2 56C 112936244 U2P1DFCa
3600 208-230/460
56C 112867969 U1P3DFCa 145TC 101666836 U2P1DCa
1200 208-230/460
145TC 105448880 U1P3DCa 3 3600 208-230/460 56C 112936267 U3P1DFCa
1
1800 208-230/460 56C 112916011 U1P2DFCa a
60/50 hz rated with no derate on HP; 230/460 V 60 hz ratings operate on 190/380 V 50 hz,
3600 208-230/460 56C 112824829 U1P1DC 460 V 60 hz ratings operate on 380 V 50 hz; Full 60 and 50 hz data on nameplate; 50 hz
efficiencies at rated HP may be less than IE3 and IE2 levels.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 411
Power Transmission
Features:
• Class F insulation, class B rise at full load on 60 hz sine wave power • Dual voltage ratings suitable for part winding start (PWS) on low
• “CE” mark on nameplate voltage
• Shaft slinger on pulley end • Suitable for Wye-Delta Start 250 frame and larger
• Full HP @ 50 hz • Conversion kits: C&D flanges, drip cover and brakes
• 40 °C ambient, NEMA design B performance on 60 hz sine wave power • For use on pumps, fans, compressors, material handling and other
• Sealed bearings (140 frame); double shielded bearings general purpose applications in damp, dusty or dirty environments
(180 frame and up) • Full 50 and 60 Hz operating data on nameplate (03)
HP RPM Voltage Frame Item No. Mfr. No. HP RPM Voltage Frame Item No. Mfr. No.
1 1/2 1200 208-230/460 182TC 101507354 U32P3DC 1800 208-230/460 254TC 101395556 U15P2DC
15
2 1200 208-230/460 184TC 101507356 U2P3DC 3600 208-230/460 215TC 105528479 U15P1DFCa
1200 208-230/460 213TC 101386114 U3P3DC 1800 208-230/460 256TC 101383165 U20P2DC
20
182TC 101407306 U3P2DC 3600 208-230/460 256TC 105527530 U20P1DCb
3 1800 208-230/460
182TCH 102450325 U3P2DK 1800 208-230/460 284TC 101437033 U25P2DCa
25
3600 208-230/460 182TC 101409775 U3P1DC 3600 208-230/460 284TC 105527804 U25P1DC
1200 208-230/460 215TC 105529275 U5P3DC 30 1800 208-230/460 286TC 101407119 U30P2DC
200 184TCH 105574894 U5P2HK a
60/50 hz rated with no derate on HP; 230/460 V 60 hz ratings operate on 190/380 V 50 hz,
5 1800 184TC 101381585 U5P2DC 460 V 60 hz ratings operate on 380 V 50 hz; Full 60 and 50 hz data on Nameplate; 50 hz
208-230/460
184TCH 105528481 U5P2DK efficiencies at rated HP may be less than IE3 and IE2 levels.
3600 208-230/460 184TC 101370149 U5P1DC b
Suitable for Wye-Delta start on voltages shown. 60/50 hz rated with no derate on HP;
1200 208-230/460 254TC 105530700 U7P3DC 230/460 V 60 hz ratings operate on 190/380 V 50 hz, 460 V 60 hz ratings operate on 380 V
7 1/2 1800 208-230/460 213TC 101405556 U7P2DC 50 hz; Full 60 and 50 hz data on Nameplate; 50 hz efficiencies at rated HP may be less than
IE3 and IE2 levels.
3600 208-230/460 213TC 101459609 U7P1DCa
1200 208-230/460 256TC 105529936 U10P3DC
10 1800 208-230/460 215TC 101436164 U10P2DC
3600 208-230/460 215TC 101381582 U10P1DC
Features:
• Class F insulation, class B rise at full load on 60 hz sine wave power
• “CE” mark on nameplate
• Shaft slinger on pulley end
• Full HP @ 50 hz
• 40 °C ambient, NEMA design B performance on 60 hz sine wave power
• Sealed bearings (140 frame); double shielded bearings (180 frame and up)
• Dual voltage ratings suitable for part winding start (PWS) on low voltage
• Suitable for Wye-Delta start 250 frame and larger
• Conversion kits: C&D flanges, drip cover and brakes
• For general industrial equipment including fans, blowers, compressors, pumps and direct connected equipment
• Full 50 and 60 Hz operating data on nameplate (03)
HP RPM Voltage Frame Item No. Mfr. No. HP RPM Voltage Frame Item No. Mfr. No.
2 1200 208-230/460 184T 101436166 U2P3D 200 256T 105669970 U20P2H
1800
1200 208-230/460 213T 105530699 U3P3D 20 208-230/460 256T 101460785 U20P2D
200 182T 105529274 U3P2H 3600 208-230/460 256T 101406689 U20P1Da
3 1800
208-230/460 182T 101460180 U3P2D 284T 105528480 U25P2H
200
3600 208-230/460 182T 101437384 U3P1D 284TS 105528084 U25P2HS
1800
1200 208-230/460 215T 101384130 U5P3D 25 284TC 101405557 U25P2Da
208-230/460
200 184T 105574892 U5P2H 284TS 105671598 U25P2DS
5 1800
208-230/460 184T 101398019 U5P2D 3600 208-230/460 284TC 101381583 U25P1D
3600 208-230/460 184T 101476906 U5P1D 200 286T 105532643 U30P2H
1200 208-230/460 254T 101460181 U7P3D 30 1800 286T 101425436 U30P2D
208-230/460
200 213T 105528482 U7P2H 286TS 101384085 U30P2DS
1800
7 1/2 208-230/460 213T 101436932 U7P2D a
60/50 hz rated with no derate on HP; 230/460 V 60 hz ratings operate on 190/380 V 50 hz,
184T 101459438 U7P1AF 460 V 60 hz ratings operate on 380 V 50 hz; Full 60 and 50 hz data on nameplate; 50 hz
3600 208-230/460
213T 101460784 U7P1Da efficiencies at rated HP may be less than IE3 and IE2 levels.
200 215T 105530707 U10P2H
1800
10 208-230/460 215T 101436096 U10P2D
3600 208-230/460 215T 101690128 U10P1D
200 254T 105529270 U15P2H
1800
208-230/460 254T 101460179 U15P2D
15
215T 101507355 U15P1AF
3600 208-230/460
254T 101469875 U15P1D
412 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
*
®
UNIMOUNT®
HP RPM Voltage Frame Enclosure Item No. Mfr. No. HP RPM Voltage Frame Enclosure Item No. Mfr. No.
1/4 1200 208-230/460 56C TEFC 101997935 T14S3DCR 1 1/2 1200 208-230/460 182TC TEFC 110273033 U32P3DCRa,*
1200 208-230/460 56C TEFC 101995962 T13S3DCR 101770882 U3E3DCRd,*
1200 208-230/460 213TC TEFC
1/3 1800 208-230/460 42CZ TEFC 101995329 T13S2D42ZCR 110273037 U3P3DCRa,*
3
3600 208-230/460 56C TEFC 101431944 T13S1ACR 182TC TEFC 105670537 U3P2DCRa,*
1800 208-230/460
1/2 1800 208-230/460 56C TEFC 105652556 U12P2DCRa 182TCH TEFC 110273036 U3P2DKRa,*
1 1800 208-230/460 56C TEFC 105676857 U1P2DFCRa 1200 208-230/460 215TC TEFC 110273041 U5P3DCRa,*
112799285 U32P2DFCRa 5 184TC TEFC 101401140 U5P2DCRa,*
56C TEFC 1800 208-230/460
1 1/2 1800 208-230/460 103950189 T32E2ACRb 184TCH TEFC 110273040 U5P2DKRa,*
145TC TEFC 105652555 U32P2DCRa 1200 208-230/460 254TC TEFC 110273043 U7P3DCRa,*
7 1/2
56C TEFC 112936246 U2P2DFCRa 1800 208-230/460 213TC TEFC 105669521 U7P2DCRa,*
1800 208-230/460
2 145TC TEFC 105527295 U2P2DCRa 1200 208-230/460 256TC TEFC 101691836 U10E3DCR*
3600 208-230/460 56C TEFC 112562875 T2P1ACRc 10 1800 208-230/460 215TC TEFC 105669971 U10P2DCRa,*
56C TEFC 101508460 T3S2ACR 3600 208-230/460 215TC TEFC 101697778 U10E1DCR*
1800 208-230/460
182TC TEFC 103949963 S3P2ACRc 1800 208-230/460 254TC TEFC 110273026 U15P2DCRa,*
3 15
56C TEFC 112855310 T3P1ACR 3600 208-230/460 215TC TEFC 110273025 U15P1DFCRa,*
3600 208-230/460
145TC TEFC 112936265 U3P1A14CRc 1800 208-230/460 256TC TEFC 110273028 U20P2DCRa,*
20
5 1800 208-230/460 184TC TEFC 103950699 S5P2ACRc 3600 208-230/460 256TC TEFC 110273027 U20P1DCRa,*
7 1/2 1800 208-230/460 213TC TEFC 103951006 S7P2ACRc 25 1800 208-230/460 284TC TEFC 110273030 U25P2DCRa,*
10 1800 208-230/460 215TC TEFC 103949870 S10P2ACRc 30 1800 208-230/460 286TC TEFC 110273032 U30P2DCRa,*
a
60/50 hz rated with no derate on HP; 230/460 V 60 hz ratings operate on 190/380 V 50 hz, 460 V 60 hz ratings operate on 380 V 50 hz; Full 60 and 50 hz data on nameplate; 50 hz efficiencies
at rated HP may be less than IE3 and IE2 levels.
b
Does not accept brake kit. Non-NEMA Premium® Rating.
c
On 60 hz sine wave power. Motors marked 208-230/460 V may not meet all NEMA (MG-1) performance standards when operated at 208 V. Does not include WORLDMOTOR® features.
d
60/50 hz rated with no derate on HP; 230/460 V 60 hz ratings operate on 190/380 V 50 hz, 460 V 60 hz ratings operate on 380 V 50 hz; Full 60 and 50 hz data on nameplate; 50 hz efficiencies
at rated HP may be less than IE3 and IE2 levels. Non-NEMA Premium® Rating.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 413
Power Transmission
Features: Options:
• Dual rated for 60 Hz and 50 Hz • Special voltages
• Optimized ventilation for cooler operation • Special shaft
• Robust feet design for the toughest applications • Space heaters, thermistors, RTDs
• Frames 182/4T and larger have two eyebolts for easier mounting in any position and other accessories
• AEGIS ring inside as an option • C and D flanges for all ratings
• Suitable for VFD operation 1000:1 VT • 1,200 and 900 rpm available
• Color coded leads • Drip cover
• Motor paint resistance exceeds 500 hours of salt spray test • F2 mounting
Rolled Steel
Applications:
• Designed for general purpose and severe-duty applications
• Pumps, compressors, fans, packaging equipment, etc.
• Chemical plants, pulp and paper, aggregate, mining, cement, steel mills, etc.
Features:
• Motors are rated for both 50 and 60 Hz operation
• MGI Part 31 rating for use with VFD – 20:1 constant torque speed range
• Stainless steel nameplate with laser etching
• 1.25 service factor
• Upgraded cooling system for quieter and cooler operation and extended life
• Solid feet for impact resistance, easier alignment and less vibration
Cast Iron • Class H resin impregnation for extended life
Voltage: 208-230/460
Frame Material: Cast Iron
414 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
WEG premium efficiency motors meet or exceed all NEMA Premium® and CEE requirements for energy efficiency. These Open Drip Proof
(ODP) motors are designed for environments where dirt and moisture are minimal. Design B torque and high efficiency design on frames
143T through 444/5T. These motors are specifically designed to provide maximum ventilation and heat dissipation.
Features: Applications:
• NEMA dimensions • Synthetic enamel alkyd resin base paint • Pumps
• NEMA Design B • NPT threaded terminal box • Fans
• Service factor 1.15 • Stainless steel nameplate – laser etched (except • Kneader and mixer machines
• Class F insulation for all frames roller steel frame – sticker) • Cutter and sawing machines
• 40 °C ambient continuous-duty (S1) • Energy Reduction: Uses less energy than • Pressing machines
• 1045 heat-treated and stress-relieved carbon steel competing products with same function and • Industrial equipment
shaft (4140 for roller bearing motors) purpose • Conveyors
• All motors are supplied with ball bearings as • Motor meets NEMA Premium® efficiency • Blowers
standard standards for electric motors • Compressors
• F1 mount • Machinery
• Cranes
Foot Mounted • Packaging equipment
Three Phase
HP RPM Voltage Frame Item No. Mfr. No.
2 1800 208-230/460 145T 110844063 00218OT3E145T-S
3 1800 208-230/460 182T 110865592 00318OT3E182T-S
5 1800 208-230/460 184T 110865594 00518OT3E184T-S
7 1/2 1800 208-230/460 213T 110865596 00718OT3E213T-S
10 1800 208-230/460 215T 110865598 01018OT3E215T-S
15 1800 208-230/460 254T 110865600 01518OT3E254T-S
20 1800 208-230/460 256T 110865822 02018OT3E256T-S
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 415
Power Transmission
Brake Motor
®
Brakemotor
Features:
• Fail-safe positive, stop and hold brakemotors
• Brakes are spring set
• Load is stopped automatically when power is turned off
• LEESON® brakemotors feature a power off manual release for convenience, and for use in case of a power failure
• The manual release resets automatically
• The standard brake is manufactured by Stearns
• The brake coil leads are brought into the conduit box of the motor for easy connection and may be connected to operate when
power to the motor is shut off, or to be actuated independent of power to the motor
C-Face - Less Base
Three Phase
Brake
Torque
HP RPM Voltage Frame Enclosure (ft lb) Item No. Mfr. No.
1/3 1800 208-230/460 56C TENV 3 102108419 114158.00
1/2 1800 208-230/460 56C TEFC 3 102239256 114159.00
3/4 1800 208-230/460 56C TEFC 6 103678336 114160.00
1 1800 208-230/460 56C TEFC 6 112783484 119564.00
1 1/2 1800 208-230/460 145TC TEFC 10 112786657 122252.00
2 1800 208-230/460 145TC TEFC 10 112786658 122253.00
3 1800 208-230/460 182TC TEFC 15 112786705 132479.00
5 1800 208-230/460 184TC TEFC 25 112786706 132480.00
Rigid Base
Three Phase
RPM Voltage Frame Enclosure HP Item No. Mfr. No. Frame Service
1200 460 L449T TEFC 300 111453545 ECR93006TR-4 Size Enclosure HP Poles Item No. Mfr. No. Factor
286T TEFC 30 111453562 ECR9304T 56 TEFC 1 2 105984192 EM3545-G 1.25
324T TEFC 40 111453574 ECR9404T 1 4 101461080 EM3546T-G 1.15
230/460 143T TEFC
326T TEFC 50 111453565 ECR9504T 1.5 2 105990373 EM3550T-G 1.15
365T TEFC 75 111453571 ECR9754T 1.5 4 102165544 EM3554T-G 1.15
1800 445T TEFC 150 111453502 ECR91504TR-4 2 105984169 EM3555T-G 1.15
145T TEFC 2
447T TEFC 200 111453498 ECR92004TR-4 4 101477137 EM3558T-G 1.15
460 250 111453549 ECR92504TR-4 3 2 105987741 EM3559T-G 1.15
449T TEFC 300 111453551 ECR93004TR-4 182T TEFC 3 4 101478903 EM3611T-G 1.15
350 111453553 ECR93504TR-4 184T TEFC 5 2 105993257 EM3613T-G 1.15
416 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Super-E® Mill & Chemical Duty AC Motor
Features: ®
Single Phase C-Face Less Base Single Phase Washdown Duty AC Motor
Washdown Duty AC Motor
Features: Features:
• Moisture sealant in select areas • Moisture sealant on select areas
• Neoprene gaskets • Neoprene gaskets
• Double-sealed bearings • Double-sealed bearings
• Forsheda® v-ring slinger • Forsheda® v-ring slinger
• Stainless steel shaft • Stainless steel shaft
• White epoxy, corrosion resistant finish • White epoxy, corrosion resistant finish
• Class F insulation • Class F insulation
• Food processing • Food processing
• Any application where motor receives • Any application where motor receives washdown
washdown on a regular basis on a regular basis
C-Face - Less Base C-Face - With Base
Single Phase Single Phase
HP RPM Voltage Frame Enclosure Item No. Mfr. No. HP RPM Voltage Frame Enclosure Item No. Mfr. No.
1/2 1800 115/230 56C TEFC 101004254 VWDL3504 1/2 1800 115/230 56C TEFC 101004124 CWDL3504
3/4 1800 115/230 56C TEFC 101004255 VWDL3507 3/4 1800 115/230 56C TEFC 101004125 CWDL3507
1 1800 115/230 56C TEFC 101004256 VWDL3510 1 1800 115/230 56C TEFC 101004127 CWDL3510
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 417
Power Transmission
Three Phase C-Face Washdown Duty Motor * †
Features: Applications:
• Moisture-resistant insulation system • Food processing
• Sealed ball bearings with moisture-resistant grease • Packaging
• Contact lip seals on fan shaft extensions • Outdoor applications
• Neoprene gaskets
• 300 series stainless steel motor frame, base, shaft and hardware
C-Face – Less Base C-Face – With Base • No exterior paint
• Non-contact labyrinth seal or output shaft extension
418 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features:
• Special two-part stainless steel output shaft seal system employs robust EPDM polymer material
• All steel gearing for optimum design lifetime
• IP69K stainless steel construction and food grade H1 grease lubricated
• Made in the USA
Torque
HP RPM (in lb) Ratio Item No. Mfr. No.
6 160 271:1 101408000 017-160-0271
12 160 139:1 101408048 017-160-0139
23 96 72:1 101408205 017-160-0072
46 50 37:1 101407877 017-160-0037
1/20
89 27 19:1 101407849 017-160-0019
173 14 10:1 101407483 017-160-0010
335 7 5:1 101408204 017-160-0005
8 500 221:1 117439751 017-260-2221
12 500 140:1 117439750 017-260-2140
24 305 72:1 117419727 017-260-2072
1/7 48 160 37:1 117439749 017-260-2037
93 82 19:1 117439748 017-260-2019
177 44 10:1 117439747 017-260-2010
353 22 5:1 117439746 017-260-2005
8 500 221:1 101408407 017-260-0221
12 500 140:1 101407485 017-260-0140
24 256 72:1 101408049 017-260-0072
1/8 47 128 37:1 101409685 017-260-0037
91 78 19:1 101407878 017-260-0019
193 34 10:1 101407484 017-260-0010
345 16 5:1 101409939 017-260-0005
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 419
Power Transmission
Stainless Steel Washdown Duty AC Motor †
*
®
®
for Water
Food Safe Premium Efficient Encapsulated Stainless Steel Motors
420 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
®
for Water
Food Safe Premium Efficient Encapsulated Stainless Steel Motors
Without Base
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 421
Power Transmission
Features:
• IP69 certified enclosure protection
• Q-Car™ rotor cartridge
• Vacuum assisted internal epoxy encapsulation
• Full body epoxy encapsulation Exposure: TEFC
• Enhanced shaft seal technology to handle
installation in any orientation Max.
• 360° rotatable conduit box Frame HP RPM Item No. Mfr. No.
• Color-coded, non-wicking motor leads 1,800 117585849 176333
• 300 Series Stainless Steel used on all exterior 182TC 3
3,600 117585848 176332
surfaces 1,800 117585851 176335
• Inverter-rated IRIS® insulation system – AC 184TC 5
3,600 117585850 176334
designs 1 hp and higher
1,800 117585853 176337
• 10:1 constant torque operation 213TC 7 1/2
• Shaft grounding rings (SGR) designs 3,600 117585852 176336
available – 1/2 to 2 hp 1,800 117585855 176339
215TC 10
• BISSC Certified, UL®, CSA listed, “CE” 3,600 117585854 176338
Features:
• IP69 certified enclosure protection
• Fully encapsulated internal epoxy encapsulation reduces points of entry for contaminants and eliminates
need for drain plugs and breathers
• Two-piece shaft seal technology provides three points of protection on both ends of the motor
• Easily removed Q-Car™ rotor cartridge makes bearing replacement ultra simple
• 360° rotatable round conduit box for convenient wire placement
• Colored, non-wicking, chemical and abrasion-resistant leads for easy connection and installation
422 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features: ®
• The kit ensures a perfectly fitted and watertight bearing with no
additional machining required in a matter of minutes Adjustable Motor Base
• Maintains factory IP69 rating
• Easily replaced in the field, reducing costly downtime
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 423
Power Transmission
RunRight® Self-Tensioning Motor Bases
RunRight elastomeric
tensioning motor bases utilize Type Frame Item No. Mfr. No.
a rubber suspension unit as
a pivot mount. The rubber 132M
132S
suspension unit continuously 160L
compensates for belt 160M
stretching, hopping, fluttering RCM C38 113992069 68514463904
213T
and excessive pull when a 215T
drive is started. RunRight 254T
tensioning motor bases are 256T
the ideal tensioning solution 132M
for all belt drives from about 132S
1/2 to 700 hp. More options 112867509 68514463018
213T
and sizes are available. 215T
160L
160M
113638226 68514463019
254T
256T
180L
180M
RCM C50 110697639 68514463020
284T
286T
200L
200M
113992026 68514463021
324T
326T
225M
225S
113592718 68514463022
364T
365T
Features:
• Engineered to provide very low impedance path between motor frame and ground
• Designed to handle high frequency currents
• Use with AEGIS® Shaft Grouding Rings to provide continuous path for VFD induced
shaft currents from motor shaft to ground
12 in Length 24 in Length
Frame Termination 1 Termination 2 Item No. Mfr. No. Item No. Mfr. No.
48, 48H, 56, 56H, 143T, 145T, 182T,
Punched Hole 0.41 in Ring Terminal for 5/16 in Screw 111879620 HFGS-T0410-R0312-12 111879851 HFGS-T0410-R0312-24
184T, 213T, 215T
254T, 256T, 284T, 284TS, 286T, 286TS,
324T, 324TS, 326T, 326TS, 364T, 364TS, Punched Hole 0.66 in Ring Terminal for 5/16 in Screw 111879622 HFGS-T0660-R0312-12 111879852 HFGS-T0660-R0312-24
365T, 365TS
404T, 404TS, 405T, 405TS, 444T, 444TS,
Punched Hole 0.94 in Ring Terminal for 5/16 in Screw 111879845 HFGS-T0940-R0312-12 111880034 HFGS-T0940-R0312-24
445T, 445TS, 447T, 447TS, 449T, 449TS
Universal Size for 5/16 in Screw Ring Terminal for 5/16 in Screw Ring Terminal for 5/16 in Screw 111879847 HFGS-R0312-R0312-12 111880037 HFGS-R0312-R0312-24
Includes AEGIS® SGR Ring and Conductive Epoxy. Kits for other motor shaft diameters also available.
424 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
SGR Accessories
CS015-AEGIS® Colloidal Silver Shaft Coating is recommended for all applications. The silver coating enhances the conductivity of the shaft and
also lessens the amount of corrosion that can impede the grounding path.
EP2400 AEGIS® Conductive Epoxy is used to install the AEGIS® Shaft Grounding Ring without drilling and tapping into the motor end bell.
Simply remove paint on the motor end bracket where the AEGIS® Ring or brackets will be attached. These areas must be clean and free of any
coatings, paint or other nonconductive material. Apply epoxy to backside of ring or bracket and press to motor end bracket.
CS015 EP2400
Container: Twin Syringe
AEGIS Colloidal Silver Shaft Coating
® Container: Bottle AEGIS® Conductive Epoxy Working Time: 5 min
Size Size
Item No. Mfr. No. Color (g) Item No. Mfr. No. Color (g)
101672598 CS015 Gray 15 101631884 EP2400 Silver Gray 7
Features:
• AEGIS® Shaft Grounding Ring designed for the motor’s “U”
dimension – shaft diameter
• Four mounting bracket styles and hardware to adapt the AEGIS® ring
to virtually any end bracket
• Screw on or AEGIS® Conductive Epoxy Adhesive mounting capable
(Epoxy EP2400 sold separately)
• Fits over slingers, seals or shaft shoulders
• Fits almost any motor design in NEMA frames from 56 to 449T or IEC frames
from 132M to 355M
SVP-TIP-9100
Shaft Split Ring Solid Ring
Dia.
Frame (in) Item No. Mfr. No. Item No. Mfr. No.
56 5/8 102795695 SGR-0.625-UKIT-1A4 101669606 SGR-0.625-UKIT
Features:
143T • Used to measure shaft voltages
7/8 101735341 SGR-0.875-UKIT-1A4 101669965 SGR-0.875-UKIT
145T • Easy one-touch screen capture
182T
1 1/8 101765316 SGR-1.125-UKIT-1A4 101623830 SGR-1.125-UKIT • Two channel, 100 MHz digital oscilloscope
184T • Two 10:1 probes, one with shaft voltage probe
213T • 1000 V CAT III multimeter
1 3/8 101732510 SGR-1.375-UKIT-1A4 101669642 SGR-1.375-UKIT • Two-year warranty
215T
254T
256T
1 5/8 101782418 SGR-1.625-UKIT-1A4 101669871 SGR-1.625-UKIT
284TS
286TS
Includes Item No. Mfr. No.
284T
AEGIS® shaft voltage tester
286T
Shaft voltage probe (2)
324TS
1 7/8 101764324 SGR-1.875-UKIT-1A4 101577594 SGR-1.875-UKIT AEGIS® shaft voltage probe tips (4)
326TS
AEGIS® grounding simulator
364TS
Probe holder
365TS 112227727 AEGIS-OSC-9100MB-W2
Alligator ground clip
324T Magnetic base
326T Handbook
2 1/8 101764323 SGR-2.125-UKIT-1A4 101658122w SGR-2.125-UKIT
404TS USB
405TS Carrying case
364T
365T
444TS
2 3/8 101766446 SGR-2.375-UKIT-1A4 101715855 SGR-2.375-UKIT
445TS
447TS
449TS Includes Item No. Mfr. No.
404T AEGIS® shaft voltage probe tips (3)
2 7/8 101766220 SGR-2.875-UKIT-1A4 101577116 SGR-2.875-UKIT
405T AEGIS® grounding simulator
444T Probe holder 112375725 SVP-KIT-9100MB
445T Alligator ground clip
3 3/8 101734722 SGR-3.375-UKIT-1A4 101658647 SGR-3.375-UKIT Magnetic base
447T
449T AEGIS® shaft voltage probe tips (3) 112433670 SVP-TIP-9100
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 425
Power Transmission
AC Parallel Shaft Gearmotor
175 Series
Max. Safe
Torque
HP RPM Voltage Enclosure Stages Ratio (lb/in) Item No. Mfr. No.
100 & 175 Series 246 Series 1 115/230 TENV 5 1369.3:1 160 101841352 016-175-1369
2 115/230 TENV 5 702.1:1 130 101912693 016-175-0702
Features:
1/20 5 115/230 TENV 4 361.7:1 155 102100787 016-175-0362
• Precision machined die cast aluminum housing
9 115/230 TENV 4 185.5:1 170 102210443 016-175-0186
• Lifetime oil bath, sealed and gasketed lubrication
• Hardened steel shafts 17 115/230 TENV 3 95.5:1 150 101841776 016-175-0096
• Face (any angle) or optional footplate mounting 63 115 Open 2 25.2:1 90 101839811 016-175-0025
• Reversible rotation 1/10 124 115 Open 2 12.9:1 47 101841777 016-175-0013
• Class B minimum insulation 240 115 Open 1 6.7:1 25 101839037 016-175-0007
• Powder-coat gloss black finish
• Included junction box
• Included capacitor on PSC units 246 Series
• Rear shaft on PSC units
• Inputs meet USA, Canadian and European voltage and frequency requirements Max. Safe
(only the 115/230 V units) Torque
• UL® certified HP RPM Voltage Enclosure Stages Ratio (lb/in) Item No. Mfr. No.
8 115 — 3 215.6:1 310 101408469 016-246-6316
100 Series 17 115 — 3 102.4:1 350 101407737 016-246-6302
Max. Safe 20 115 — 3 81.8:1 300 101408847 016-246-6382
Torque 29 115 — 3 58.3:1 249 101407876 016-246-6358
HP RPM Voltage Enclosure Stages Ratio (lb/in) Item No. Mfr. No. 1/8 59 115 — 2 28.8:1 127 101408047 016-246-6329
17 115 TENV 3 95.5:1 100 101839304 016-101-0100 89 115 — 2 19.1:1 84 101408468 016-246-6319
22 115 TENV 3 71.7:1 100 101841950 016-101-0072 111 115 — 2 15.0:1 66 101409684 016-246-6315
33 115 TENV 3 49.0:1 96 101914333 016-101-0050 157 115 — 2 10.6:1 47 101407848 016-246-6311
43 115 TENV 3 36.7:1 62 101841009 016-101-0037 337 115 — 2 5.0:1 16 101408203 016-246-6305
63 115 TENV 2 25.2:1 49 101841263 016-101-0026 47 115/230 TEFC 3 35.8:1 294 101839731 016-246-4036
1/20
95 115 TENV 2 16.8:1 30 101841198 016-101-0017 58 115/230 TEFC 2 28.8:1 227 101887035 016-246-4029
124 115 TENV 2 12.9:1 25 101841775 016-101-0013 88 115/230 TEFC 2 19.1:1 163 102223163 016-246-4019
1/4
154 115 TENV 2 10.5:1 20 101841427 016-101-0010 113 115/230 TEFC 2 15.0:1 128 101839732 016-246-4015
240 115 TENV 1 6.7:1 13 101841353 016-101-0007 159 115/230 TEFC 2 10.6:1 91 102222749 016-246-4011
320 115 TENV 1 5.0:1 10 102086635 016-101-0005 338 115/230 TEFC 2 5.0:1 41 102223357 016-246-4005
426 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features: Features:
• Precision machined die cast aluminum housing • Precision machined die cast aluminum housing
• Lifetime oil bath, sealed and gasketed lubrication • Lifetime oil bath, sealed and gasketed lubrication
• Hardened steel shafts • Hardened steel shafts
• All position pilot or base mounting • All position pilot or base mounting
• Hardened steel worm gearing; forged bronze gear • Hardened and polished steel worm gearing; forged
• Premium quality double shielded ball bearings bronze gear
• Permanent split capacitor motor • Premium quality double shielded ball bearings
• Reversible rotation • Permanant magnet motor
• Class B minimum insulation • Reversible rotation
• Powder-coat gloss black finish • Class F insulation
• Mounted junction box • Powder-coat gloss black finish
• Mounted capacitor • TENV enclosure
• Rear extension for brake • Replaceable brushes
• Variable speed with appropriate control (1.37 form
factor maximum)
• Mounting base
• Shaft mount encoder
750 Series • Accessory shaft
Max. Safe Full
Torque Load 750 Series
HP RPM Voltage Enclosure Ratio (lb/in) Amps Item No. Mfr. No. Max. Safe Full
28 230 TEFC 60:1 100 0.75 102086220 027-756-4060 Torque Load
36 230 TEFC 45:1 120 0.75 102086219 027-756-4045 HP RPM Voltage Enclosure Ratio (lb/in) Amps Item No. Mfr. No.
55 230 TEFC 30:1 130 0.75 101972245 027-756-4030 60 90 TENV 30:1 120 2.33 101942273 021-756-4530
1/4 80 230 TEFC 20.5:1 108 0.75 101943347 027-756-4020 90 90 TENV 20:1 100 2.33 101958979 021-756-4520
124 230 TEFC 13:1 76 0.75 102087010 027-756-4013 1/4 135 90 TENV 13:1 70 2.33 101996070 021-756-4513
160 230 TEFC 10:1 58 0.75 101943666 027-756-4010 180 90 TENV 10:1 55 2.33 101961304 021-756-4510
330 230 TEFC 5:1 30 0.75 101958978 027-756-4005 360 90 TENV 5:1 30 2.33 101941684 021-756-4505
Integral Horsepower Reducers PowerSTAR® 725 Series Right Angle Hypoid Gearmotor
Features:
• Best-in-class right angle hypoid gearmotors
Q Series Worm Reducer • Advanced hypoid gearing technology for improved
Modular to accomodate NEMA and IEC standard energy efficiency
sizes. Precision machined single-piece aluminum • Maximum power density means a compact profile
housing combines light weight with long product life. without compromising performance
• Power: 1/4 - 5 HP • Exclusive PowerSTAR® EP lubricant for extended life
• Speed: 17.2 - 250 RPM • Ground gearing provides whisper quiet operation, low
• Torque: 257 - 2921 in-lbs. backlash precision
• Higher torque capability
• Up to 4x more efficient than traditional technology
right angle gearmotors
• Quieter operation
S Series Washdown Reducer • Unmatched energy efficiency
Modular to accomodate Modular to • Available in imperial and metric sizes with AC and DC
accomodate NEMA and IEC standard sizes. input motors
IP69K rated stainless steel construction for • Custom options available
operation in harsh environments. • Perfect for light conveyors and packaging equipment
• Power: 1/4 - 5 HP
• Speed: 17.2 - 250 RPM Stages: 2
• Torque: 248 - 2921 in-lbs. Voltage: 230/400-460
TENV - Totally Enclosed (Non-Ventilated)
Max. Max.
Safe Torque Overhung Load
HP RPM Ratio (in lb) (lb) Item No. Mfr. No.
X Series Hypoid Reducer 7 240:1 900 940 114499328 021-725A0240
Modular to accomodate NEMA and IEC standard 9 180:1 680 870 114499327 021-725A0180
sizes. 2 and 3 stage ground and hardened gear 1/8 11 150:1 570 820 114499326 021-725A0150
combinations are available for a wide range of 14 120:1 450 780 114499325 021-725A0120
ratio options and quiet operation. 17 100:1 380 740 114499324 021-725A0100
• Power: 1/3 - 2 HP 21 80:1 480 620 114499323 021-725C0080
• Speed: 5.4 - 290 RPM 28 60:1 360 580 114499334 021-725C0060
• Torque: 1195 - 3629 in-lbs. 34 50:1 300 550 114499348 021-725C0050
42 40:1 240 510 114499333 021-725C0040
1/5
56 30:1 180 475 114499332 021-725C0030
Bison Integral Horsepower Reducers are configurable to your power transmission 84 20:1 120 430 114499331 021-725C0020
needs. Contact your local Applied® service center for current pricing and ordering 112 15:1 90 400 114499330 021-725C0015
information. 168 10:1 60 355 114499329 021-725C0010
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 427
Power Transmission
Features:
• Designed to be used with vector duty rated AC motors
• Open loop flux vector design
• Typical applications would include: food processing, machinery, material handling and HVAC systems
• Easy set-up and operation
• Program the vector control in one of four convenient ways
• Easy to use keypad and display
• Vivid illumination
• Multiple braking functions
Integrated Integrated
Line Line
HP Amps Phase Disconnect Item No. Mfr. No. HP Amps Phase Disconnect Item No. Mfr. No.
1/2 2.4 Single No 101552709 174604.00 1 2.1 Three No 101552711 174621.00
1 4.2 Single No 101552960 174605.00 2 3.5 Three No 101552712 174623.00
3 4.8 Three No 101552961 174624.00
5 8.2 Three No 101560337 174625.00
7 1/2 11.0 Three No 101552091 174626.00
Input Voltage: 115/230
Enclosure: NEMA 4 / IP65 indoor only, Convection Cooled 10 14.0 Three No 101560338 174627.00
15 21.0 Three No 101469827 174628.00
Integrated 20 27.0 Three No 101459086 174629.00
Line 25 35.0 Three No 113080000 174630.00
HP Amps Phase Disconnect Item No. Mfr. No. 30 45.0 Three No 113079998 174991.00
No 101460750 174652.00 40 59.0 Three No 112356827 174992.00
1/2 2.4 Single
Yes 114930340 174540.00 60 87.0 Three No 113080002 174711.00
1 4.2 Single No 101459136 174653.00
Integrated Integrated
Line Line
HP Amps Phase Disconnect Item No. Mfr. No. HP Amps Phase Disconnect Item No. Mfr. No.
1/2 2.4 Single/Three No 101557305 174607.00 No 101435751 174671.00
1/2 1.1 Three
1 4.2 Single/Three No 104590355 174608.00 Yes 114930341 174542.00
1 1/2 6.0 Three No 101341088 174609.00 1 2.1 Three No 101460753 174672.00
2 7.0 Three No 101584261 174610.00 2 3.5 Three No 101460752 174674.00
3 9.6 Three No 101553991 174611.00 3 4.8 Three No 101435719 174675.00
5 16.5 Three No 101557306 174615.00 5 8.2 Three No 101435752 174676.00
7 1/2 23.0 Three No 101560496 174616.00 7 1/2 11.0 Three No 101459564 174677.00
10 29.0 Three No 101584263 174617.00
15 42.0 Three No 101459562 174618.00
Integrated Integrated
Line Line
HP Amps Phase Disconnect Item No. Mfr. No. HP Amps Phase Disconnect Item No. Mfr. No.
1/2 2.4 Single/Three No 101435750 174655.00 No 101436782 174678.00
10 14.0 Three
1 4.2 Single/Three No 101436781 174656.00 Yes 114930613 174546.00
2 7.0 Single/Three No 101435625 174658.00 No 113055854 174701.00
15 21.0 Three
3 9.6 Single/Three No 101435475 174659.00 Yes 114930342 174544.00
5 16.5 Three No 101435476 174660.00 20 27.0 Three No 111823901 174702.00
7 1/2 23.0 Three No 101435626 174661.00 25 34.0 Three No 113055882 174703.00
10 29.0 Three No 101460751 174662.00 30 40.0 Three No 113055884 174704.00
15 42.0 Three No 113055856 174699.00
20 54.0 Three No 113055855 174700.00
Remote keypad kit includes an 8 ft connecting cable and gasket. Potentiometer kit takes the place of the up/down buttons on the drive’s
Mounted in proper enclosure, the keypad kit will provide up to keypad gives operators hands-on speed control over the Inverter’s
NEMA 4 protection. For SM2 Flux Vector Drive. speed range. For SM2 Flux Vector Drive.
428 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Min. Max.
Bore Bore Torque
Size Size Bushing O.D. Rating Have You Registered on
(in) (in) Series (in) (ft lb) Item No. Mfr. No.
1/2 1 1008 5.172 30 100840825 5381-170-002a Applied.com?
Requires 1008 taperlock bushing.
Why Wait?
a
• Built for your toughest applications • Interchangeable with most major brand gearmotors
LEESON®️ AC and DC Gearmotors are engineered for applications requiring consistent operation.
www.regalbeloit.com
Creating a better tomorrow™...
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 429
Power Transmission
*
UniModule Clutch-Brake
Features:
• Heavy-duty bearings maintain tight concentricity and running efficiency • Single access hole for all wires
• Fan-cooled for long life, consistent performance and high cycle rate • Hollow bore input for mounting directly to NEMA C-face motors
operation • Brake shaft and C-face on output side accommodate reducer, parallel
• Completely sealed coils drive or coupling
• Patented Autogaps™ automatically adjust for wear • Changes to the housing fin design increase heat dissipation capacities
• Same performance as EM series without assembly required • Improved input-to-output axis design reduces vibration and improves
• One-piece clutch and clutch/brake packages in five sizes noise and wear factors
• Can be motor or reducer mounted or used as a separate drive unit • Use of custom-designed mounting bolts allows for conduit box location
powered by a prime mover directly on top of the unit
• Preassembled, prealigned and preburnished at factory for rated torque • Bolt hole patterns are repositioned for ease of mounting
directly out of the box • Cover plate bolts to both sides of the unit, creating a completely
• NEMA C-face compatible design enclosed brake package which keeps contaminates out and wear
• Single conduit entrance particles in for clean, quiet operation
• Easy setscrew access • Complies with RoHS restrictions on the use of certain hazardous
• Bearing mounted clutch rotor eases assembly alignment substances in electrical and electronic equipment
• High torque, long-life, asbestos-free friction material • Use for clutch/brake applications
• Easy to install • Available field-installed conversion kit creates totally enclosed brake
• Maintenance-free package without need to replace entire unit
Plug-in Octal Socket Power Supply Integral / Conduit Box Mounted Control
Features:
• Provides full voltage to a 90 VDC clutch or brake
• Activated by an external switch Features:
• Plug-in power supply • Conduit box mounted controls for 90 VDC clutches
• Operates two units separately or simultaneously and brakes
• Arc suppression circuitry extends switch life • Mounts inside a standard Warner Electric conduit
• Fused for overload protection box and includes rectification and suppression
• LED output indicators circuits
• DIN rail mountable • Compact
• For basic on/off operation • Single channel
• Power supply is sufficient for many clutch/brake • UL® recognized in US and Canada
applications
• UL® recognized in US and Canada
Output Voltage: 90 VDC
Output Voltage: 90 VDC Mount Type: Conduit Box
Mount Type: Octal Socket No. of Channels: 1
No. of Channels: 2 Customer Supplied Switching Options: Relay AC
Customer Supplied Switching Options: Relay DC Input Voltage: 120 VAC
Input Voltage: 120 VAC
Item No. Mfr. No.
Item No. Mfr. No. 100839453 6003-448-101
100839451 6001-448-004
Purchase octal socket separately.
EM or UM Conduit Box
Aggregate to Automotive, Food & Beverage to
Forest Products – Applied® understands the
applications within your specific industry and Features:
• Complies with RoHS restrictions on the use of
where we can improve your operating processes. certain hazardous substances in electrical and
electronic equipment
Learn more:
Applied.com/industries
Item No. Mfr. No. Use With Model
100839447 5370-101-042 Modules Conduit Box (EM or UM)
430 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features:
• Gears are made of hardened alloy steel
• Precision ground alloy steel shafts are mounted on precision ball bearings Bearing Type: Ball Bearing
• Housings are made of aluminum alloy, with all mounting surfaces precision machined Input Configuration: Shaft Input
• Shaft projections have quality oil seals Washdown Duty: No
• Prelubricated for life Ratio: 1:1
Gear Style: Spiral Bevel
Input Shaft Position: Facing You
Max.
Input & Output Torque Overhung
Output Relative Bolt Hole Box Box Box Output Input HP RPM @ Out @ Load @
Shaft Shaft Pattern Unit Height Length Width Shaft @ 1750 rpm 1750 rpm 1750 rpm
Output Position Rotation (in) Size (in) (in) (in) (in) 1750 rpm Input (in lb) (lb/in) Item No. Mfr. No.
1.31 x 1.31 6 1 1/4 3.07 2.76 3/8 0.91 1,750 31 25 101805920 RA621
Counter
Single Right 1.88 x 1.88 10 2 4.53 4.26 5/8 2.19 1,750 75 50 101772672 RA1021
Clockwise
3.00 x 3.00 15 3 6.88 6.00 3/4 3.50 1,750 125 100 101834789 RA1521
Clockwise 1.88 x 1.88 10 2 4.53 4.26 5/8 2.19 1,750 75 50 101772339 RA1031
Double Left & Right Counter
Clockwise 3.00 x 3.00 15 3 6.88 6.00 3/4 3.50 1,750 125 100 101839830 RA1531
Ratings shown reflect maximum gear capacity with Klubersynth UH1 6-460.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 431
Power Transmission
Box Center
Height Distance Base to
Center Line
Output (Shaft Base to of Input Shaft
or Bore) Size Centerline of
Output Shaft
Features:
• Rounded housing that eliminates all flat surfaces
• Covers for all counter bored holes, including motor, flange, base and inset fill and drain holes
• Laser-marked name plate information, ensuring worry-free part identification without indentations on the housing
• Provides smooth, uninterrupted surfaces, preventing foreign matter adherence and fluid accumulation on the gearbox
• Maintains the same critical dimensions as its trusted cast iron sister series and utilizes the same gearing and shafts for easy field retrofitting and backwards compatibility
CenterDistance Bolt Center Width Bolt Center Length Base to Centerline of Output Shaft Bolt Size
1 3/8 3.25 2.00 1.72 5/16-18
1 1/2 4.19 2.75 1.91 5/16-18
1 3/4 4.19 2.75 2.06 5/16-18
2 1/16 5.00 2.88 2.28 3/8-16
2 3/8 5.00 2.88 2.50 3/8-16
2 5/8 6.38 3.38 2.94 3/8-16
3 1/4 7.50 4.00 3.50 7/16-14
432 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 433
Power Transmission
Tigear-2® Quilled Input Left &/or Right Output Worm Gear Reducer
Worm
Center
Features: Distance
• Totally enclosed, ventless sealing system (in) A B C D E F G H I J K
• Factory filled synthetic lubricant 1.33 1.33 1.71 4.88 4.24 4.10 2.00 3.25 4.00 7.03 4.41 0.625
• HNBR seal material provides better wear and temperature range 1.50 1.50 1.87 5.48 5.00 4.00 2.25 3.50 4.31 7.09 4.41 0.750
• Increased gear precision and accuracy 1.75 1.75 1.99 5.85 5.50 4.89 2.75 4.19 4.31 8.09 4.92 0.875
• Seal journals held to exacting tolerances 2.00 2.00 2.24 6.35 6.12 5.01 2.88 5.00 4.69 8.47 5.02 1.000
• Higher torque capacity
2.31 2.31 2.50 7.38 6.76 5.68 2.88 5.00 5.14 9.12 5.47 1.125
• Greater efficiency
• Cooler operating temperatures 2.63 2.63 2.87 8.36 7.26 5.77 3.38 6.38 5.63 9.37 5.51 1.125
• Left, right or hollow output shafts 3.00 3.00 3.25 8.88 10.24 6.67 4.00 7.00 6.75 10.58 6.12 1.375
• Synthetic lubricant meets H1 food grade requirements 3.50 3.50 3.99 10.57 8.88 7.05 4.00 7.50 7.06 1.92 7.11 1.500
Center
Distance Input HP Output RPM @ Left Output Right Output
(in) Frame Ratio @ 1750 rpm 1750 rpm Input Item No. Mfr. No. Item No. Mfr. No.
5:1 1.32 350 101900359 13Q05L56 101900407 13Q05R56
10:1 0.85 175 101899249 13Q10L56 101926285 13Q10R56
1.33 56C
15:1 0.64 117 101915668 13Q15L56 101900360 13Q15R56
20:1 0.53 88 101930259 13Q20L56 — —
5:1 1.75 350 101929670 15Q05L56 101899254 15Q05R56
10:1 1.13 175 100818370 15Q10L56 101914519 15Q10R56
1.50 56C 15:1 0.86 117 101350719 15Q15L56 101926314 15Q15R56
20:1 0.70 88 100818371 15Q20L56 101898956 15Q20R56
30:1 0.51 58 101900104 15Q30L56 101927697 15Q30R56
5:1 2.59 350 101930759 17Q05L56 101900417 17Q05R56
10:1 1.67 175 101914644 17Q10L56 101926312 17Q10R56
15:1 1.27 117 100818372 17Q15L56 101914643 17Q15R56
1.75 56C 20:1 1.03 88 100818373 17Q20L56 101915049 17Q20R56
30:1 0.76 58 101929928 17Q30L56 101914645 17Q30R56
40:1 0.60 44 100949357 17Q40L56 100949358 17Q40R56
60:1 0.43 29 101916767 17Q60L56 101915988 17Q60R56
10:1 2.25 175 101915991 20Q10L56 101914652 20Q10R56
15:1 1.69 117 101914804 20Q15L56 101914653 20Q15R56
20:1 1.34 88 100818374 20Q20L56 100818375 20Q20R56
2.00 56C 30:1 0.96 58 101914833 20Q30L56 101943756 20Q30R56
40:1 0.76 44 101916107 20Q40L56 101367799 20Q40R56
50:1 0.64 35 — — 101917979 20Q50R56
60:1 0.56 29 101929921 20Q60L56 101915060 20Q60R56
48Y
10:1 4.83 175 101850013 26Q10L56 101844443 26Q10R56
56C
15:1 3.62 117 101915860 26Q15L56 101900138 26Q15R56
2.63 20:1 2.71 88 100818376 26Q20L56 100818377 26Q20R56
56C 30:1 2.00 58 100818378 26Q30L56 101915935 26Q30R56
40:1 1.55 44 100818379 26Q40L56 100818380 26Q40R56
60:1 1.08 29 100949359 26Q60L56 101915700 26Q60R56
434 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
*
Min. Max.
Arm Arm
Length Length
Use With Reducer Item No. Mfr. No. Use With (in) (in) Item No. Mfr. No.
#17 100949321 17BRACKET #20 Reducer
15 18 102033156 2023TIEROD
#20 100949322 20BRACKET #23 Reducer
#26 100949324 26BRACKET* #26 Reducer 14 3/4 17 3/4 100949350 26TIEROD
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 435
Power Transmission
436 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Mfr. Box Box Box Min. Max.
Unit Height Length Width Bore Bore
Size (in) (in) (in) (in) (in) Ratio Item No. Mfr. No.
Torque Arm II Taper Bushed Shaft Mount Reducer 9:1 100948981 TA0107L09TPR
0107 11.35 9.47 4 3/4 1 1 7/16 15:1 100948982 TA0107L15TPR
25:1 100948983 TA0107L25TPR
5:1 100818425 TA1107H05TA TPR
9:1 100818426 TA1107H09TA TPR
1107 13.02 10.82 4.70 1 1 1/2 15:1 100818427 TA1107H15TA TPR
25:1 100818428 TA1107H25TA TPR
31:1 100818429 TA1107H31TA TPR
5:1 100818445 TA2115H05TA TPR
15:1 100818447 TA2115H15TA TPR
2115 15.08 12.61 5.30 1 5/16 2 3/16
25:1 100818448 TA2115H25TA TPR
33:1 100818449 TA2115H33TA TPR
15:1 100818469 TA3203H15TA TPR
3203 16.61 13.96 6.18 1 7/16 2 3/8 25:1 100818470 TA3203H25TA TPR
Features: 32:1 100818471 TA3203H32TA TPR
• Modular shaft mount and screw conveyor drive 15:1 100949065 TA4207H15TA TPR
• Compact, flexible drive design 4207 20.14 16.61 6.31 1 11/16 2 11/16 25:1 100949066 TA4207H25TA TPR
• Exclusive twin tapered bushings provide sturdy, concentric grip of driven shaft on 40:1 100949067 TA4207H40TA TPR
both sides of reducer 15:1 100949110 TA5215H15TPR
• Larger gear teeth and extended gear centers provide greater input horsepower and 5215 23.81 19.35 7.20 1 15/16 3 3/16 25:1 100949111 TA5215H25TPR
output torque capabilities per case size 40:1 100949112 TA5215H40TPR
• Significantly increased torque and horsepower ratings comparable to next larger 15:1 100949155 TA6307H15TA TPR
size TXT 6307 25.23 20.55 7.62 2 3/16 3 7/16 25:1 100949156 TA6307H25TA TPR
• Modular design with modular accessories for inventory savings 40:1 100949157 TA6307H40TA TPR
• New backstop design with centrifugal lift-off sprags, now compatible with EP Lube 15:1 100949197 TA7315H15TPR
• New premium sealing system
7315 30.93 23.52 8.18 2 7/16 4 7/16 25:1 100949198 TA7315H25TPR
• New 36 month/18 month warranty protection
• Meets AGMA specifications 40:1 100949199 TA7315H40TPR
• ATEX certified Requires tapered bushing.
Output Output
Center Input HP RPM @ Center Input HP RPM @
Output Distance Frame @ 1750 1750 rpm Output Distance Frame @ 1750 1750 rpm
Configuration (in) Size Ratio rpm Input Item No. Mfr. No. Configuration (in) Size Ratio rpm Input Item No. Mfr. No.
10:1 1.625 175 101673558 GR8180111.00 10:1 6.151 175 106055426 GR8300219.00
15:1 1.224 117 105357460 GR8180112.00 15:1 4.843 117 106069641 GR8300220.00
20:1 1.046 88 105103890 GR8180113.00 20:1 3.947 88 106052394 GR8300221.00
25:1 0.884 70 106067636 GR8180114.00 25:1 3.355 70 103030453 GR8300222.00
1.75 56C 140TC
30:1 0.741 58 101676346 GR8180115.00 30:1 2.879 58 106065054 GR8300223.00
40:1 0.609 44 105525590 GR8180116.00 40:1 2.251 44 106062689 GR8300224.00
50:1 0.515 35 105127738 GR8180117.00 50:1 1.915 35 103404775 GR8300225.00
60:1 0.449 29 106051536 GR8180118.00 60:1 1.637 29 106044518 GR8300226.00
Left Output 3.00
10:1 3.564 175 105038999 GR8240183.00 10:1 6.151 175 106065196 GR8300183.00
15:1 2.765 117 101639812 GR8240184.00 15:1 4.843 117 106049989 GR8300184.00
20:1 2.326 88 105479616 GR8240185.00 20:1 3.947 88 106061680 GR8300185.00
25:1 1.967 70 105907384 GR8240186.00 25:1 3.355 70 106064108 GR8300186.00
Left Output 140TC 56C
30:1 1.653 58 106066955 GR8240187.00 30:1 2.879 58 106045678 GR8300187.00
40:1 1.342 44 105316817 GR8240188.00 40:1 2.251 44 106053716 GR8300188.00
50:1 1.137 35 106055244 GR8240189.00 50:1 1.915 35 105057061 GR8300189.00
60:1 0.967 29 106039330 GR8240190.00 60:1 1.637 29 105327768 GR8300190.00
2.38
10:1 3.564 175 106044367 GR8240147.00
15:1 2.765 117 105600992 GR8240148.00
20:1 2.236 88 102728918 GR8240149.00
25:1 1.967 70 106040047 GR8240150.00
56C
30:1 1.653 58 105046203 GR8240151.00
40:1 1.342 44 105122443 GR8240152.00
50:1 1.137 35 105582532 GR8240153.00
60:1 0.967 29 106044676 GR8240154.00 Continued on next page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 437
Power Transmission
Continued from previous page.
Backstop
Ratio Lift-Off Speed
Use With Supported (Min. Input RPM) Item No. Mfr. No.
0107, 1107 5:1, 9:1, 15:1, 25:1, 31:1 875 100818436 TA1107H BKSTP ASSY
2115 5:1, 9:1, 15:1, 25:1, 33:1 875 100818458 TA2115BKSTP ASSY
3203 5:1, 9:1, 15:1, 25:1, 32:1 825 100818481 TA3203BKSTP ASSY
5:1, 9:1, 15:1, 25:1 780 100949092 TA4207BKSTP ASSY
4207
40:1 780 100949093 TA4207BKSTP40:1
5:1, 9:1, 15:1, 25:1 720 100949139 TA5215BKSTP ASSY
5215
40:1 720 100949140 TA5215BKSTP40:1
5:1, 9:1, 15:1 610 100949182 TA6307BKSTP ASSY
6307
25:1, 40:1 610 100949183 TA6307BKSTP25&40:1
7315 5:1, 9:1, 15:1, 25:1 490 100949222 TA7315BKSTP ASSY
For best results, select reducer ratios which exceed input shaft speeds required for backstop sprag lift-off.
438 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
CA Series Backstop
Features:
• Non-rollover cam design
• Precision ground races and cam surfaces
• High torque capacity
• EP compatible
• Direct drop-in design
• Internal backstop for TXT series reducers
Bore
Size Shaft Keyseat
Mfr. Unit Bore Size Shaft Keyseat Mfr. Unit Size (in) (in) Item No. Mfr. No.
Size (in) (in) Item No. Mfr. No.
4207 2 7/16 5/8 x 5/16 x 5.65 100949090 TA4207TBS2 7/16KIT
0107 1 7/16 3/8 x 3/16 100948992 TA0107TB1 7/16KIT
1107 1 7/16 3/8 x 3/16 100818433 TA1107TB1 7/16KIT
1 3/4 3/8 x 3/16 100818454 TA2115TB1 3/4KIT
1 15/16 1/2 x 1/4 100818455 TA2115TB1 15/16KIT
2115
2 1/2 x 1/4 100818456 TA2115TB2KIT
2 3/16 1/2 x 1/4 100949031 TA2115TB2 3/16KIT
1 15/16 1/2 x 1/4 100818477 TA3203TB1 15/16KIT
3203
2 3/16 1/2 x 1/4 100818479 TA3203TB2 3/16KIT
4207 2 7/16 5/8 x 5/16 100949078 TA4207TB2 7/16KIT Visit Applied.com/UST for additional
2 7/16 5/8 x 5/16 100949120 TA5215TB2 7/16KIT
5215 2 15/16 3/4 x 3/8 100949124 TA5215TB2 15/16KIT products, articles and videos,
3 3/16 3/4 x 3/8 100949126 TA5215TB3 3/16KIT
6307 2 15/16 3/4 x 3/8 100949166 TA6307TB2 15/16KIT
designed to fit your unique needs.
3 15/16 1 x 1/2 100949209 TA7315TB3 15/16KIT
7315
4 7/16 1 x 1/2 100949211 TA7315TB4 7/16KIT
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 439
Power Transmission
440 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
D Type Bored Universal Joint
Standard, industrial-type universal joint with pin and block design. Lovejoy has the largest selection of universal joints. More styles and sizes available online.
Trantorque GT
Features:
• Fewer components mean easier installation
• With no keyway, shaft can transmit greater torque
• Mechanical shrink fit resists shock and torque reversal
• Use directly over empty keyways to repair a worn or damaged connection
• Unique, single-nut positive lock and release action allows for infinite positioning
• Eliminates the need to hold shaft or block machine while applying installation torque
• Traditional single nut concept for ease of installation
• For shaft sizes 2” or 55 mm and larger see our complete line of B-LOC® Keyless Bushings
• Also available with electroless nickel, thin dense chromate plating or stainless steel construction for added corrosion protection
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (IV-m) Item No. Mfr. No.
5/8 1 1/2 164 103960035 6202120UP 15 38 210 103956511 6202800UP
3/4 1 1/2 196 103956826 6202160UP 16 38 224 103956955 6202803UP
13/16 1 3/4 222 103958193 6202190UP 17 38 238 104000649 6202804UP
7/8 1 3/4 239 103960036 6202200UP 18 38 252 103955821 6202805UP
15/16 1 3/4 256 103956959 6202220UP 19 38 266 103956512 6202808UP
1 1 3/4 273 103957959 6202240UP 20 45 292 103957960 6202811UP
1 1/16 2 333 103956957 6202270UP 22 45 322 103984482 6202815UP
1 1/8 2 353 103956827 6202280UP 24 45 351 103956423 6202820UP
1 3/16 2 372 103956422 6202300UP 25 45 366 103956545 6202825UP
1 1/4 2 392 103956242 6202320UP 28 51 466 103956243 6202830UP
1 5/16 2 3/8 412 103984489 6202350UP 30 51 499 103960037 6202835UP
1 3/8 2 3/8 431 103956960 6202360UP 32 51 532 104000650 6202840UP
1 7/16 2 3/8 452 103984490 6202380UP 34 60.5 569 103961625 6202845UP
1 1/2 2 3/8 471 103984896 6202400UP 35 60.5 585 103956244 6202850UP
1 9/16 2 5/8 535 103957504 6202430UP 36 60.5 602 103984651 6202855UP
1 5/8 2 5/8 557 103961633 6202440UP 38 60.5 636 103956424 6202860UP
1 11/16 2 5/8 578 101872738 6202460UP 40 67 728 103984491 6202865UP
1 3/4 2 5/8 599 103956956 6202480UP 42 67 765 103955832 6202870UP
1 13/16 2 7/8 979 103955830 6202510UP 45 73 1,296 103984483 6202876UP
1 7/8 2 7/8 1,013 103984900 6202520UP 48 73 1,383 103956513 6202880UP
1 15/16 2 7/8 1,047 103955831 6202540UP
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 441
Power Transmission
Trantorque Mini
Features:
• Provides a zero backlash frictional connection that will never wear • Ability to transmit higher torques than keyed connections
or pound out • Zero-backlash
• Can accommodate high torque, thrust, bending and/or radial loads • Less equipment downtime
• Exceptional concentricity and the ability to accommodate bending • Ability to mount over existing keyways
loads • Complete axial and radial adjustability
• Limited axial movement during installation • Best suited for small shaft applications where speed and simplicity
• All Trantorque units use a single hex nut for quick and easy of installation and repositioning are critical
installation
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (in lb) Item No. Mfr. No. (mm) (mm) (N-m) Item No. Mfr. No.
1/8 5/8 100 110956671 6410013 3 16 11 103984471 TTQM0316
3/16 5/8 151 103955811 6410019 4 16 14 103956821 TTQM0416
1/4 5/8 201 102185732 6410025 5 16 18 104000637 TTQM0516
5/16 3/4 404 101690730 6410031 6 161 21 102185733 TTQM0616
3/8 3/4 485 101720630 6410038 7 20 40 103957024 TTQM0720
7/16 7/8 737 104000639 6410044 8 20 46 101819537 TTQM0820
1/2 7/8 842 101785778 6410050 9 20 51 102049195 TTQM0920
9/16 1 1,223 103957027 6410056 10 23 75 103956113 TTQM1023
5/8 1 1,359 101615698 6410063 11 23 82 102226039 TTQM1123
12 23 90 102211006 TTQM1223
14 26 135 101671789 TTQM1426
15 26 145 103984470 TTQM1526
16 26 155 101673694 TTQM1626
Features:
• Shallow, single taper design with integrated push-off threads • Simple installation, adjustment and removal, even in the field
• Excellent concentricity • Able to mount on plain shafting to allow the use of smaller
• Ability to transmit bending loads shafts and bearings
• True zero backlash shaft-to-hub connection • B103 has limited axial movement during installation
• Flexibility to mount over existing keyways • B106 has no axial movement during installation
• Straight bore machining of mounted components • B106 needs an intergrated spacer sleeve to mount narrow
• Self-centering hub components
B103 B106 • Complete axial and radial adjustability
Inch Inch
I.D. O.D. Torque I.D. O.D. Torque
Type (in) (in) (ft lb) Item No. Mfr. No. Type (in) (in) (ft lb) Item No. Mfr. No.
3/4 1.850 247 101480316 B302012 2 7/8 4.528 4,718 101480910 T302214
7/8 1.850 289 101461564 T302014 2 15/16 4.528 4,821 100793265 B302215
1 1.969 396 100793243 B302100 3 4.724 4,923 101464297 B302300
1 1/8 2.165 445 101465091 B302102 3 1/4 4.921 6,000 101480413 T302304
1 3/16 2.165 470 101481218 B302103 B103 3 3/8 4.921 6,231 101480333 T302306
1 1/4 2.362 660 100793245 B302104 3 7/16 5.118 6,347 101508357 B302307
1 3/8 2.362 726 100793246 B302106 3 1/2 5.118 6,462 101480914 T302308
1 7/16 2.559 759 100793247 B302107 3 3/4 5.315 7,693 101464298 T302312
1 1/2 2.559 792 100793248 B302108 4 5.709 10,101 101481233 T302400
1 5/8 2.953 1,439 101508346 B302110 1 1/2 2.559 600 100793312 B602108
1 11/16 2.953 1,494 101475270 T302111 1 5/8 2.953 1,090 100793313 B602110
1 3/4 2.953 1,550 100793251 B302112 1 11/16 2.953 1,132 100793314 B602111
B103
1 7/8 3.150 1,660 101463334 T302114 1 3/4 2.953 1,174 100793315 B602112
1 15/16 3.150 1,716 100793253 B302115 1 7/8 3.150 1,257 101480582 B602114
2 3.150 1,771 101482947 B302200 1 15/16 3.150 1,299 100793317 B602115
2 1/8 3.346 2,150 101465702 T302202 2 3.150 1,341 100793318 B602200
B106
2 3/16 3.346 2,214 101465434 B302203 2 1/8 3.346 1,629 101508345 T602202
2 1/4 3.543 2,277 100793257 B302204 2 3/16 3.346 1,676 100793320 B602203
2 3/8 3.543 2,403 100793258 T302206 2 1/4 3.543 1,724 100793321 B602204
2 7/16 3.740 2,775 100793259 B302207 2 3/8 3.543 1,820 100793322 B602206
2 1/2 3.740 2,846 101461572 B302208 2 7/16 3.740 2,102 100793323 B602207
2 9/16 3.740 2,917 101480591 T302209 2 1/2 3.740 2,155 100793324 B602208
2 11/16 4.331 4,411 100793262 T302211 2 9/16 3.740 2,209 101464462 T602209
2 3/4 4.331 4,513 101480325 T302212 Continued on next page.
442 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
Type (in) (in) (ft lb) Item No. Mfr. No. Type (mm) (mm) (ft lb) Item No. Mfr. No.
2 11/16 4.331 3,340 101464470 T602211 40 65.000 1,164 101482944 B301040
2 3/4 4.331 3,418 100793327 B602212 42 75.000 1,991 101464456 T301042
2 7/8 4.528 3,573 101482956 B602214 45 75.000 2,133 101475274 B301045
2 15/16 4.528 3,651 100793329 B602215 50 80.000 2,371 100793236 B301050
3 4.724 3,729 101465436 B602300 55 85.000 2,980 101464467 T301055
3 1/4 4.921 4,040 100793331 B602304 60 90.000 3,251 101465709 B301060
3 3/8 4.921 4,719 100793332 T602306 65 95.000 3,962 101480409 T301065
B103
3 7/16 5.118 4,807 100793333 B602307 70 110.000 6,151 101481790 B301070
3 1/2 5.118 4,894 101482957 B602308 75 115.000 6,591 101480417 T301075
3 3/4 5.315 5,826 101405221 T602312 80 120.000 7,030 101481791 T301080
4 5.709 7,438 100793337 B602400 85 125.000 8,403 101480330 B301085
B106 4 7/16 6.102 8,251 100793338 B602407 90 130.000 8,897 101480331 B301090
4 3/4 6.496 9,936 101480336 T602412 95 135.000 10,435 101480329 T301095
4 15/16 7.087 14,057 100793340 B602415 100 145.000 13,478 101482961 B301100
5 7.087 14,235 101481240 T602500 38 65.000 798 101464286 T601038
5 7/16 7.480 15,480 101465111 B602507 40 65.000 839 101465694 B601040
5 15/16 7.874 18,782 101465716 B602515 42 75.000 1,515 101480320 T601042
6 7/16 8.858 24,436 100793344 B602607 48 80.000 1,732 101480905 T601048
6 15/16 9.252 26,334 101508360 T602615 50 80.000 1,804 101480583 B601050
7 9.252 26,571 101465446 B602700 55 85.000 2,268 100793283 B601055
7 7/16 9.843 35,290 101465447 B602707 60 90.000 2,268 101481224 B601060
7 15/16 10.236 37,663 101465840 T602715 65 95.000 3,016 101464293 T601065
8 10.236 37,959 104329330 T602800 70 110.000 4,624 101481788 T601070
75 115.000 4,955 101482955 B601075
80 120.000 5,285 101480415 B601080
85 125.000 6,317 101480594 T601085
B106 90 130.000 6,689 101480911 B601090
95 135.000 7,845 101480913 T601095
100 145.000 9,901 101480596 B601100
110 155.000 10,891 101465711 B601110
120 165.000 13,366 101475283 B601120
130 180.000 19,751 101465838 T601130
140 190.000 21,270 101481238 B601140
150 200.000 25,321 101465444 T601150
160 210.000 29,710 101465715 B601160
170 225.000 34,437 104324777 B601170
180 235.000 36,463 104319163 B601180
190 250.000 48,110 104325674 T601190
200 260.000 50,634 104359464 B601200
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 443
Power Transmission
From precision medical devices to powerful turbines, B-LOC® Keyless Bushings are perfectly suited for use in any industry where there is a need to mount a
component to a shaft without the need for keys and keyways, splines or other traditional connection methods.
Features:
• Wide, double taper design for enhanced bending moment capacity
• Excellent concentricity
• Through-bored hubs
• No axial movement during installation
• True zero backlash shaft-to-hub connection
• Able to mount on plain shafting to allow the use of smaller shafts and bearings
• Flexibility to mount over existing keyways
• Straight bore machining of mounted components
• As-turned surface finishes
• Complete axial and radial adjustability
• Simple installation, adjustment and removal, even in the field
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (N-m) Item No. Mfr. No.
1 1/2 2.953 2,011 100793376 B122108 38 75 2,742 101480581 T121038
1 5/8 2.953 2,179 101480588 B122110 40 75 2,886 101461569 B121040
1 11/16 2.953 2,263 101481222 T122111 42 75 3,030 101480587 T121042
1 3/4 2.953 2,347 100793378 B122112 45 75 3,247 101465103 B121045
1 7/8 3.15 2,873 100793379 B122114 48 80 3,958 101464466 T121048
1 15/16 3.15 2,969 100793380 B122115 50 80 4,123 101464465 B121050
2 3.15 3,065 100793381 B122200 55 85 5,102 101475277 B121055
2 1/8 3.346 3,664 101480592 B122202 60 90 6,184 101508352 B121060
2 3/16 3.346 3,771 100793383 B122203 65 95 6,700 101464469 B121065
2 1/4 3.543 4,310 101482953 B122204 70 110 11,559 101480917 B121070
2 3/8 3.543 4,550 101508353 B122206 75 115 12,384 101482464 T121075
2 7/16 3.74 4,669 100793386 B122207 80 120 14,531 101482465 B121080
2 1/2 3.74 4,789 100793387 B122208 85 125 15,439 101465105 T121085
2 9/16 3.74 4,909 101465708 B122209 90 130 17,834 101465440 B121090
2 5/8 4.331 8,155 101482963 B122210 95 135 18,824 101482959 T121095
2 11/16 4.331 8,349 101481792 T122211 100 145 27,222 101480920 B121100
2 3/4 4.331 8,543 100793391 B122212 110 155 32,666 101481798 B121110
2 7/8 4.331 8,932 100793392 B122214 120 165 41,575 101465717 B121120
2 15/16 4.724 10,039 100793393 B122215 130 180 52,658 101483199 B121130
3 4.724 10,252 101464300 B122300 140 190 66,159 101480925 B121140
3 1/8 4.724 10,679 100793395 T122302 150 200 75,948 101483056 B121150
3 1/4 4.724 11,107 100793396 B122304 160 210 86,412 101481002 B121160
3 3/8 5.118 12,582 101480597 B122306 170 225 109,506 101465448 T121170
3 7/16 5.118 12,815 100793398 B122307 180 235 124,230 101465586 T121180
3 1/2 5.118 13,048 100793399 B122308 190 250 139,873 101465587 T121190
3 5/8 5.118 13,514 101481234 T122310 200 260 147,235 101480341 B121200
3 3/4 5.709 19,172 100793401 B122312
3 7/8 5.709 19,811 100793402 B122314
4 5.709 20,450 100793404 B122400
4 1/4 6.102 23,703 100793405 T122404
4 3/8 6.102 24,400 101482469 T122406
4 7/16 6.496 28,874 100793407 B122407
4 1/2 6.496 29,280 100793408 B122408
4 3/4 6.496 30,907 101480424 T122412
4 15/16 7.087 37,477 101465720 B122415
5 7.087 37,952 100793411 B122500
5 1/4 7.48 46,491 101508361 B122504
5 7/16 7.48 48,151 101465115 B122507
5 1/2 7.48 48,704 100793414 T122508
5 3/4 7.874 54,555 101465721 T122512
5 15/16 7.874 56,334 100793416 B122515
6 8.268 60,722 101482471 B122600
6 7/16 8.858 77,782 101482472 T122607
6 1/2 8.858 78,537 104326180 T122608
6 15/16 9.252 89,810 101482630 B122615
7 9.252 90,619 101483201 B122700
7 1/4 9.843 100,113 104325344 T122704
7 7/16 9.843 102,702 104324778 T122707
7 1/2 9.843 103,565 104359467 T122708
7 3/4 10.236 107,017 104325676 T122712
7 15/16 10.236 109,606 104324898 T122715
8 10.236 110,469 104326181 T122800
444 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
From precision medical devices to powerful turbines, B-LOC® Keyless Bushings are perfectly suited for use in any industry where there is a
need to mount a component to a shaft without the need for keys and keyways, splines or other traditional connection methods.
Features:
• Self-releasing, double taper design permits simple adjustment and • Flexibility to mount over existing keyways
removal • Straight bore machining of mounted components
• No axial movement during installation • As-turned surface finishes
• True zero backlash shaft-to-hub connection • Complete axial and radial adjustability
• Able to mount on plain shafting to allow the use of smaller shafts • Simple installation, adjustment and removal, even in the field
and bearings
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (N-m) Item No. Mfr. No.
1 1/2 2.559 820 100793194 B402108 18 47 302 101475266 T401018
1 5/8 2.953 1,381 100793195 B402110 40 65 1,175 101463327 B401040
1 11/16 2.953 1,434 101480900 B402111 42 75 1,892 101465099 B401042
1 3/4 2.953 1,487 100793197 B402112 45 75 2,027 101482943 B401045
1 7/8 3.15 1,593 100793198 B402114 48 80 2,162 101461568 T401048
1 15/16 3.15 1,646 100793199 B402115 50 80 2,252 101464284 B401050
2 3.346 1,983 100793200 B402200 55 85 2,889 101480901 B401055
2 1/8 3.346 2,107 100793201 B402202 60 90 3,152 101464287 B401060
2 3/16 3.543 2,169 100793202 B402203 65 95 3,903 101463332 B401065
2 1/4 3.543 2,231 100793203 B402204 70 110 5,880 101481785 B401070
2 3/8 3.531 2,354 100793204 T402206 75 115 6,300 101480326 B401075
2 7/16 3.74 2,762 100793205 B402207 80 120 6,720 101465104 B401080
2 1/2 3.74 2,832 100793206 B402208 85 125 8,158 101480909 T401085
2 9/16 3.737 2,903 101465435 T402209 90 130 8,639 101464471 B401090
2 5/8 4.331 4,139 101481786 B402210 95 135 10,259 101508354 B401095
2 11/16 4.331 4,238 101480590 B402211 100 145 12,800 101465578 B401100
2 3/4 4.337 4,336 101480997 T402212 110 155 14,081 101481229 B401110
2 7/8 4.528 4,533 101464468 T402214 120 165 17,553 101481228 B401120
2 15/16 4.528 4,632 100793212 B402215 130 180 23,771 101465108 B401130
3 4.724 4,730 100793213 B402300 140 190 28,161 101464301 B401140
3 1/8 4.724 4,928 101480908 B402302 150 200 32,917 101465714 T401150
3 1/4 4.921 5,857 101465707 T402304 160 210 38,033 101465109 B401160
3 3/8 4.921 6,082 100793216 B402306 170 225 44,752 104325673 B401170
3 7/16 5.118 6,195 100793217 B402307 180 235 51,694 101480422 B401180
3 1/2 5.118 6,307 101481225 B402308 190 250 63,654 101480923 B401190
3 3/4 5.305 7,603 101481794 T402312 200 260 71,794 101465718 B401200
3 7/8 5.709 9,320 101482466 T402314
3 15/16 5.709 9,471 100793220 T402315
4 5.843 9,621 101475281 B402400
4 3/16 6.102 10,072 101481239 T402403
4 7/16 6.496 12,198 100793222 B402407
4 1/2 6.496 12,370 100793223 B402408
4 15/16 7.087 16,966 101475286 B402415
5 7.087 17,180 100793225 T402500
5 7/16 7.48 20,552 100793226 B402507
6 8.268 26,801 101480421 B402600
6 7/16 8.858 31,764 101480423 T402607
6 1/2 8.858 32,072 101483052 B402608
6 15/16 9.252 37,434 104324776 B402615
7 9.252 37,679 101465443 B402700
7 1/2 9.823 47,099 101483202 T402708
7 7/8 10.236 52,986 101481004 T402714
7 15/16 10.504 53,407 101465588 T402715
8 10.504 53,821 104325139 T402800
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 445
Power Transmission
Series C133 Locking Assembly
Unique, keyless frictional devices that provide an easily adjustable and releasable mechanical shrink fit. All the advantages of a shrink fit with none of the problems.
Features:
• Offers a way to securely hold a pulley on a shaft • For larger shaft diameters please see our complete line of Climax KLD
• Guaranteed zero backlash locking assemblies
• Will not vibrate loose • Complies with RoHS restrictions on the use of certain hazardous
• Multiple plating options and stainless steel available for substances in electrical and electronic equipment
corrosion resistance
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (ft lb) Item No. Mfr. No.
1 2.0 313 101936561 C133E-100 20 47.0 206 101931697 C133M-20X47
1 3/8 2.4 574 101938474 C133E-137 32 60.0 526 101940664 C133M-32X60
1 7/16 2.6 600 101934476 C133E-143 35 60.0 576 101935822 C133M-35X60
1 1/2 2.6 626 101935818 C133E-150 40 65.0 658 101928962 C133M-40X65
1 5/8 3.0 1,097 101958532 C133E-162 45 75.0 1,196 101933461 C133M-45X75
1 15/16 3.2 1,308 101928086 C133E-193 50 80.0 1,329 101930092 C133M-50X80
2 3.2 1,350 101928956 C133E-200 60 90.0 1,823 101928961 C133M-60X90
2 7/16 3.7 2,116 101933925 C133E-243 75 115.0 3,741 101928093 C133M-75X115
2 15/16 4.5 3,721 101940662 C133E-293 Other sizes available. Please call your local Applied® service center.
3 4.7 3,800 101938472 C133E-300
3 7/16 5.1 4,899 101928088 C133E-343 WARNING: This product can expose you to chemicals including chromium (VI) and
3 1/2 5.1 4,988 101928087 C133E-350 nickel which are known to the State of California to cause cancer, birth defects or other
4 5.7 7,568 101934017 C133E-400 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including chromium (VI) and
nickel which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features:
• Drop-in replacement for commonly used hex nut keyless bushings
• Simple installation using annular M6 socket head cap screws
• No axial movement of mounted component during installation
446 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Series C123 Locking Assembly
Unique, keyless frictional devices that provide an easily adjustable and releasable mechanical shrink fit. All the advantages of a shrink fit with none of the problems.
Features:
• Single taper design
• Flangeless design mounts flush inside component bore
• Mounted component moves axially during installation
• Multiple plating options and stainless steel available for corrosion resistance
• For larger shaft diameters please see our complete line of Climax KLD locking assemblies
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (ft lb) Item No. Mfr. No.
1 2.0 313 101934473 C123E-100 20 47 206 101933926 C123M-20X47
1 1/4 2.4 522 101958530 C123E-125 22 47 226 101935819 C123M-22X47
1 7/16 2.6 600 101928958 C123E-143 24 50 308 101934477 C123M-25X50
1 1/2 2.6 626 101930934 C123E-150 40 65 658 101936131 C123M-40X65
1 5/8 3.0 1,097 101930936 C123E-162 42 75 1,117 101935820 C123M-42X75
1 3/4 3.0 1,182 101936560 C123E-175 50 80 1,329 101941060 C123M-50X80
1 15/16 3.2 1,308 101938470 C123E-193 55 85 1,671 101928960 C123M-55X85
2 3.2 1,350 101937676 C123E-200 Other sizes available. Please call your local Applied® service center.
2 1/4 3.5 1,736 101958531 C123E-225
2 7/16 3.7 2,116 101936128 C123E-243 WARNING: This product can expose you to chemicals including chromium (VI) and
2 1/2 3.7 2,170 101933838 C123E-250 nickel which are known to the State of California to cause cancer, birth defects or other
2 15/16 4.5 3,721 101934475 C123E-293 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
3 7/16 5.1 4,899 101930087 C123E-343
4 5.7 7,568 101958529 C123E-400
WARNING: This product can expose you to chemicals including chromium (VI) and
nickel which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features:
• Original double taper, self-releasing design
• First generation device; not self centering
• No axial movement of mounted component during installation
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (ft lb) Item No. Mfr. No.
3/4 1.9 223 101934482 C200E-075 25 50 329 101928972 C200M-25X50
1 2 334 101934020 C200E-100 35 60 614 101936139 C200M-35X60
1 3/16 2.2 441 101933930 C200E-118 55 85 2,074 101928098 C200M-55X85
1 1/4 2.4 557 101934021 C200E-125 60 90 2,263 101933851 C200M-60X90
1 7/16 2.6 748 101933465 C200E-143 65 95 2,802 101928971 C200M-65X95
1 1/2 2.6 780 101930095 C200E-150 75 115 4,499 101935833 C200M-75X115
1 3/4 3 1,437 101933464 C200E-175 80 120 4,799 101935834 C200M-80X120
1 7/8 3.2 1,540 101928966 C200E-187 95 135 7,327 101933853 C200M-95X135
1 15/16 3.2 1,591 101936132 C200E-193 Other sizes available. Please call your local Applied® service center.
2 3.3 1,916 101940672 C200E-200
WARNING: This product can expose you to chemicals including chromium (VI) and
2 3/16 3.5 2,095 101928967 C200E-218
nickel which are known to the State of California to cause cancer, birth defects or other
2 7/16 3.7 2,669 101936572 C200E-243
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
2 1/2 3.7 2,737 101937677 C200E-250
2 7/8 4.5 4,381 101935831 C200E-287
2 15/16 4.5 4,476 101930096 C200E-293
3 7/16 5.1 5,986 101934022 C200E-343
3 1/2 5.1 6,095 101941062 C200E-350
3 15/16 5.7 8,779 101940675 C200E-393
4 5.8 8,919 101928964 C200E-400
4 7/16 6.5 11,308 101933846 C200E-443
4 1/2 6.5 11,467 101936574 C200E-450
4 15/16 7.1 15,727 101958542 C200E-493
5 7.1 15,926 101938481 C200E-500
5 7/16 7.5 19,052 101936575 C200E-543
5 1/2 7.5 19,271 101941063 C200E-550
6 8.3 24,845 101935832 C200E-600
WARNING: This product can expose you to chemicals including chromium (VI) and
nickel which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 447
Power Transmission
Series C733 Shrink Disc
Min. Max.
I.D. O.D. Torque Torque
(mm) (mm) (ft lb) (ft lb) Item No. Mfr. No.
36 72 319 675 101933656 C733M-36
44 80 694 1,215 101933655 C733M-44
50 90 982 1,590 101934052 C733M-50
55 100 1,032 1,734 101933963 C733M-55
62 110 1,746 2,412 101933882 C733M-62
68 115 1,790 2,646 101934053 C733M-68
75 138 2,808 4,079 101936600 C733M-75
80 145 3,435 4,351 101936601 C733M-80
90 155 4,779 7,175 101936603 C733M-90
100 170 7,098 9,638 101935653 C733M-100
Features: 110 185 8,873 12,421 101933881 C733M-110
• External keyless locking device 125 215 13,504 19,262 101936454 C733M-125
• Inherently balanced for high speed applications 140 230 19,544 26,310 101938507 C733M-140
• Smaller hub cross section thickness 155 263 27,370 33,868 101937371 C733M-155
• For larger shaft diameters please see complete line of Climax KLD Shrink Discs 195 350 71,451 84,390 101933961 C733M-195
• Complies with RoHS restrictions on the use of certain hazardous substances in 200 350 80,170 86,554 101938509 C733M-200
electrical and electronic equipment
• High start and stop applications Other sizes available. Please call your local Applied® service center.
• Coupling hubs and hollow shaft gearboxes WARNING: This product can expose you to chemicals including chromium (VI) and
nickel which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features:
• Heavy-duty
• Wider design transmits higher torque and bending moments
• Excellent concentricity; extremely robust for the most demanding applications
• Multiple plating options and stainless steel available for corrosion resistance
• For larger shaft diameters please see complete line of Climax KLD locking assemblies
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• Conveyor pulleys, crusher and shredder rotors and similar rotating drum applications subjected to heavy loads
Inch Metric
I.D. O.D. Torque I.D. O.D. Torque
(in) (in) (ft lb) Item No. Mfr. No. (mm) (mm) (ft lb) Item No. Mfr. No.
1 2.2 626 101931698 C405E-100 25 55 617 102216311 C405M-25X55
1 1/4 2.4 914 101930094 C405E-125 35 60 1,007 101934483 C405M-35X60
1 1/2 3.0 2,026 101938476 C405E-150 50 80 3,038 101933844 C405M-50X80
1 3/4 3.0 2,363 101933462 C405E-175 90 130 13,466 101937678 C405M-90X130
1 15/16 3.2 2,990 101928089 C405E-193 100 145 20,483 101938484 C405M-100X145
2 3.2 3,087 101928959 C405E-200 160 210 64,117 101941088 C405M-160X210
2 3/16 3.3 3,798 101928963 C405E-218 Other sizes available. Please call your local Applied® service center.
2 1/4 3.5 4,341 101928090 C405E-225
2 7/16 3.7 4,703 101934478 C405E-243 WARNING: This product can expose you to chemicals including chromium (VI) and
2 3/4 4.3 8,709 101928091 C405E-275 nickel which are known to the State of California to cause cancer, birth defects or other
2 15/16 4.7 10,233 101940668 C405E-293 reproductive harm. For more information, go to www.P65Warnings.ca.gov.
3 4.7 10,451 101934018 C405E-300
3 1/4 4.7 11,322 101958537 C405E-325
3 7/16 5.1 13,064 101938477 C405E-343
3 1/2 5.1 13,301 101934479 C405E-350
3 15/16 5.7 20,486 101958539 C405E-393
4 1/4 6.1 24,122 101928095 C405E-425
4 7/16 6.5 29,384 101936569 C405E-443
4 15/16 7.1 37,693 101935825 C405E-493
5 7.1 38,170 101940670 C405E-500
WARNING: This product can expose you to chemicals including chromium (VI) and
nickel which are known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
448 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
PBUS Series Cam Clutch
Features:
• Prelubricated with synthetic grease
• Easy assembly to gears, pulleys and sprockets
• High torque capacity
• General over running, indexing
Features: Applications:
• Non rollover cam design • Reciprocating systems
• Precision ground races and cam surfaces
• High torque capacity
• Prelubricated with oil
• Bores available in metric and imperial dimensions
Features:
• Non rollover cam design
• Precision ground races and cam surfaces
• High torque capacity
• Bores available in metric and imperial dimensions
• Prelubricated with oil
• General overrunning applications
• High overrunning requirements
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 449
Power Transmission
BB Series Cam Clutch
Features: Applications:
• Uses industry standard 62 series ball bearings • General industrial use
• Available with metal shield or dust seals • Smal spaces
• Prelubricated with grease with oil as option • Press fit installation
• Low profile
• Metric dimensions
Step-Up Adapter
Features:
• These adapters repair, alter, increase or • Will not mar the shaft
decrease or extend current shaft • Easily installed
• Afford an option of a re-machinable shaft • High torque capability
• Compatible with all standard round shafts
450 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Step-Down Adapter
Features:
• Recessed screw head design provides an outside surface free of major projections
• High axial load capacity
• Does not mar shaft
• Precision machined with minimal runout
• Additional sizes available
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 451
Power Transmission
Metric One Piece Industry Standard Clamping Coupling
Features:
• Fully engages shaft without marring
• High axial load capacity
• Precision machined with minimal runout
• Additional sizes available
• Bore tolerance +.003/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Features:
• Fully engages shaft without marring
• High axial load capacity
• Precision machined with minimal runout
• Additional sizes available
• Bore tolerance +.003/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
No Keyway
Bore A Bore B O.D. Width Black Oxide Steel Stainless Steel Aluminum
(in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No. Item No. Mfr. No.
1/4 1/4 11/16 1 1/8 101782320 ISCC-025-025 101784312 ISCC-025-025-S 101784313 ISCC-025-025-A
1/4 7/8 1 3/8 101783409 ISCC-037-025 — — — —
3/8
3/8 7/8 1 3/8 101807827 ISCC-037-037 101783553 ISCC-037-037-S 101807828 ISCC-037-037-A
3/8 1 1/8 1 3/4 101781108 ISCC-050-037 — — — —
1/2
1/2 1 1/8 1 3/4 101784314 ISCC-050-050 101781109 ISCC-050-050-S 101784347 ISCC-050-050-A
1/2 1 5/16 2 101784030 ISCC-062-050 — — — —
5/8
5/8 1 5/16 2 101783462 ISCC-062-062 101808448 ISCC-062-062-S — —
3/4 3/4 1 1/2 2 1/4 101781110 ISCC-075-075 101809998 ISCC-075-075-S — —
7/8 7/8 1 5/8 2 1/2 101784315 ISCC-087-087 101400778 ISCC-087-087-S — —
1/2 1 3/4 3 101783271 ISCC-100-050 — — — —
1
1 1 3/4 3 101783742 ISCC-100-100 101808284 ISCC-100-100-S — —
1 1/4 1 1/4 2 1/16 3 1/4 101783272 ISCC-125-125 101808283 ISCC-125-125-S — —
1 3/8 1 3/8 2 1/4 3 1/2 101808256 ISCC-137-137 — — — —
WARNING: This product can expose you to chemicals including chromium (VI) and nickel which are known to the State of California to cause cancer, birth defects or other reproductive
harm. For more information, go to www.P65Warnings.ca.gov.
With Keyway
452 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
No Keyway
Bore A Bore B O.D. Width Black Oxide Steel 303 Stainless Steel
(in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
1/4 1/4 5/8 1 102069122 CLX-4-4-Fa 102014085 CLX-4-4-SSb
1/2 1/2 1 1/8 1 3/4 101868515 CLX-8-8-Fa 102074532 CLX-8-8-SSb
3/4 3/4 1 1/2 2 1/4 101829978 CLX-12-12-Fa 102222788 CLX-12-12-SSb
a
WARNING: This product can expose you to the chemical ethylene thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
b
WARNING: This product can expose you to the chemical nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
With Keyway
Bore A Bore B O.D. Width Keyway A Keyway B Black Oxide Steel 303 Stainless Steel
(in) (in) (in) (in) (in) (in) Item No. Mfr. No. Item No. Mfr. No.
5/8 5/8 1 5/16 2 3/16 3/16 102141171 CLC-10-10-Fa 101947444 CLC-10-10-SSb
3/4 3/4 1 1/2 2 1/4 3/16 3/16 101485182 CLC-12-12-Fa 101719004 CLC-12-12-SSb
1 1 1 3/4 3 1/4 1/4 102207094 CLC-16-16-Fa 101968486 CLC-16-16-SSb
1 1/8 1 1/8 1 7/8 3 1/8 1/4 1/4 101499849 CLC-18-18-Fa 102070440 CLC-18-18-SSb
1 1/4 1 1/4 2 1/16 3 1/4 1/4 1/4 102204015 CLC-20-20-Fa 101921230 CLC-20-20-SSb
a
WARNING: This product can expose you to the chemical ethylene thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
b
WARNING: This product can expose you to the chemical nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Re-Machinable Coupling
Features:
• Oversized O.D.
• Pilot bore can be opened safely to the nominal I.D. reflected in the part number
• Economical answer to custom solutions
• Does not mar shaft
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
No Keyway
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 453
Power Transmission
Two Piece Industry Standard Clamping Coupling
Features:
• Fully engages shaft without marring
• High axial load capacity
• Easily installed where major disassembly would otherwise be required
• Precision machined with minimal runout
• Additional sizes available
• Bore tolerance +.003/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
No Keyway
With Keyway
Features:
• Fully engages shaft without marring
• High axial load capacity
• Easily installed where major disassembly would otherwise be required
• Precision machined with minimal runout
• Additional sizes available
• Bore tolerance +.003/-.000
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
454 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
No Keyway
No Keyway
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 455
Power Transmission
L Type Finished Bore Jaw Coupling Hub
This coupling offers standard shaft-to-shaft connection for general industrial-duty applications. Lovejoy has the largest selection of jaw coupling
components. Jaw hub sizes and styles are available online.
Specifications
SOX (NBR) Spider Urethane Spider Hytrel Spider Bronze Spider
Max. Bore Max. Bore Torque Torque Torque Torque Torque Torque Torque
Size (in) (mm) (in-lbs) Torque (Nm) (in-lbs) (Nm) (in-lbs) (Nm) (in-lbs) (Nm)
L035 0.375 9 3.5 0.4 - - - - - -
Includes: L/AL050 0.625 16 26.3 3.0 39 4.5 50 5.6 50 5.6
• One setscrew L/AL070 0.750 19 43.2 4.9 65 7.3 114 12.9 114 12.9
L/AL075 0.875 22 90.0 10.2 135 15.3 227 25.6 227 25.6
L/AL090 1.000 25 144.0 16.3 216 24.4 401 45.3 401 45.3
L/AL095 1.125 28 194.0 21.9 291 32.9 561 63.4 561 63.4
L/AL099 1.188 30 318.0 35.9 477 53.9 792 89.5 792 89.5
L/AL100 1.375 35 417.0 47.1 626 70.7 1134 128.0 1134 128.0
L/AL110 1.625 42 792.0 89.5 1188 134.0 2268 256.0 2268 256.0
L150 1.875 48 1240.0 140.0 1860 210.0 3708 419.0 3706 419.0
L190 2.125 55 1728.0 195.0 2592 293.0 4680 529.0 4680 529.0
Coupling Size Insert Style Item No. Mfr. No. Material: Urethane Spider
L050 Solid 101085991 L050 SPIDER HYT Temperature Range: -30 °F to 160 °F
L070 Open Center 110285505 L070HYT SOX
L075, AL075 Open Center 102133121 L075HYT SOX Coupling Size Insert Style Item No. Mfr. No.
L090, L095, AL090, AL095 Open Center 100812711 L090/L095HYT OCT L050 Solid 100812696 L/AL050URE SOX
L099, L100, AL099, AL100 Open Center 102115834 L099/L100HYT OCT Open Center 101086033 L/AL070URE SOX
L070
Open Center 101085954 L110HYT SOX OCT Solid 102117988 L070URE SOX
L110, AL110
Solid 102115815 L110HYT SOX L075, AL075 Open Center 111337074 L/AL075 SPIDER URE OCT 3/4
Open Center 101086302 L150HYT SOX OCT L090, L095, AL090, AL095 Open Center 102088768 L090/L095URE OCT
L150
Solid 102117237 L150HYT SOX L099, L100, AL099, AL100 Open Center 102116803 L099/L100URE OCT
Open Center 101086308 L190HYT SOX OCT L110, AL110 Open Center 102116369 L110URE SOX OCT
L190
Solid 101086307 L190HYT L150 Open Center 102093127 L150URE SOX OCT
Open Center 101086314 L225HYT SOX OCT L190 Open Center 102156642 L190URE SOX OCT
L225
Solid 102117246 L225HYT SOX L225 Solid 101086315 L225URE SOX
456 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Snap Wrap Coupling Spider Jaw In-Shear Type Spider & Ring
Features:
• Uses the Lovejoy industry-standard hub design
• 2° angular misalignment capability
Features: • No tools required for element replacement
• Easily installed or removed without disturbing • Quick change for easy spider replacement - without
the coupling hubs moving either hub
• Highly flexible • Accommodates bore sizes up to 4”
• Oil-resistant • Highly corrosive, heavy washdown environments
Max. Temperature: 200 °F
Features:
• Patented axial thrust tabs reduce reactionary loads on
connected equipment to protect and extend equipment life
• Replace-in-place design eliminates the need for hub removal
Wrapflex Cover & Element Assembly
and movement/realignment of connected equipment with
element replacement for reduced downtime
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 457
Power Transmission
Bellows Coupling
The most accurate and stiffest motion control couplings. High torque capacity makes them ideal for demanding reversing applications, such as a servo motor
connected to a leadscrew or ballscrew. These couplings are very accurate but have limited misalignment capabilities.
Features:
• Zero backlash
• Balanced design for high speeds up to 10,000 rpm
• Anodized aluminum hubs for low inertia
• Stainless steel bellows for high torsional stiffness
• More sizes available
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
• Dynamic torque ratings: Divide static torque by two for nonreversing and by four
for reversing applications
Inch Material: Aluminum Hub, Stainless Steel Bellows
Metric
Torsional Overall Max. Max. Parallel Max. Axial
Bore A Bore B Torque Stiffness O.D. Length Angular Misalignment Misalignment
(mm) (mm) (N-m) (Nm/Deg) (mm) (mm) Misalignment (mm) (mm) Item No. Mfr. No.
12 12 13.6 45 33 42.9 1.5 ° 0.15 0.40 102020819 MBC33-12-12-A
Additional inch and metric sizes and setscrew styles available.
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Machined from a single piece of aluminum or stainless steel. They are ideal for motion control applications utilizing tachometers, encoders and other instrumentation.
Features:
• Shorter, industry-standard lengths for easy retrofits
• Greater flexibility and lighter bearing loads to protect expensive instrumentation
• Zero backlash
• Torsionally stiffer than single beam couplings
• Balanced design for high speeds up to 6,000 rpm
• Clamping design will not damage shafts
• Accommodates all forms of misalignment
• No maintenance required
• More sizes available
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
• Lighter-duty applications using delicate components
• Dynamic torque ratings: Divide static torque by two for nonreversing and by four
for reversing applications
Inch Material: Aluminum
Torsional Overall
Bore A Bore B Torque Stiffness O.D. Length
(in) (in) (in lb) (°/ in lb) (in) (in) Item No. Mfr. No.
1/4 1/4 14 0.33 3/4 0.90 101903710 PCR12-4-4-A
1/4 30 0.20 1 1.25 101732504 PCR16-6-4-A
3/8
3/8 30 0.20 1 1.25 101904372 PCR16-6-6-A
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Torsional Overall
Bore A Bore B Torque Stiffness O.D. Length
(mm) (mm) (N-m) (°/Nm) (mm) (mm) Item No. Mfr. No.
6 6 1.58 2.90 19.1 22.90 102030919 PCMR19-6-6-A
10 10 3.39 1.80 25.4 31.80 102167554 PCMR25-10-10-A
Additional inch and metric sizes and setscrew styles available.
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
458 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Machined from a single piece of aluminum or stainless steel. They have shorter, stiffer beams to give greater accuracy and higher torque than single or four beam couplings.
Features:
• Zero backlash
• Torsionally stiffer than single or four beam couplings
• Balanced design for high speeds up to 6,000 rpm
• Clamping design will not damage shafts
• Accommodates all forms of misalignment
• No maintenance required
• Light-duty power transmission; especially servo and stepper motor applications
• More sizes available
• Complies with RoHS restrictions on the use of certain hazardous substances in
electrical and electronic equipment
Inch Material: Aluminum
Torsional Overall
Bore A Bore B Torque Stiffness O.D. Length
(in) (in) (in lb) (°/ in lb) (in) (in) Item No. Mfr. No.
26 0.152 3/4 1 1/4 101762845 FCR12-4-4-A
1/4 1/4
35 0.064 1 1 1/2 102226408 FCR16-4-4-A
1/4 33 0.093 1 1 1/2 101911945 FCR16-6-4-A
3/8 33 0.093 1 1 1/2 101911946 FCR16-6-6-A
3/8
61 0.048 1 1/4 1 3/4 101737186 FCR20-6-6-A
3/8 50 0.072 1 1/4 1 3/4 101933034 FCR20-8-6-A
1/2
1/2 50 0.072 1 1/4 1 3/4 101466350 FCR20-8-8-A
5/8 5/8 95 0.043 1 1/2 2 1/4 102130595 FCR24-10-10-A
5/8 80 0.063 1 1/2 2 1/4 101814631 FCR24-12-10-A
3/4
3/4 80 0.063 1 1/2 2 1/4 102149510 FCR24-12-12-A
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Torsional Overall
Bore A Bore B Torque Stiffness O.D. Length
(in) (in) (in lb) (°/ in lb) (in) (in) Item No. Mfr. No.
1/2 3/8 107 0.037 1 1/4 1 3/4 101829985 FCR20-8-6-SS
Additional inch and metric sizes and setscrew styles available.
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Oldham Coupling
Comprised of two aluminum hubs and a center torque transmitting disc. The torque disc is available in a choice of acetal for high torsional stiffness, nylon for vibration and shock
dampening and PEEK for high temperature and low outgassing. The center element fits over drive tenons on the hubs with a press fit to ensure zero backlash operation (with an
acetal or PEEK disc). In operation, the disc slides over the tenons to accommodate misalignment. In the event of over-torquing, the disc will break cleanly, stopping all power
transmission. This makes this coupling suitable for use as a mechanical fuse. The disc is easily replaceable and will restore the coupling to its original performance. This type of
coupling is especially good at handling parallel misalignment.
Features:
• Useful as a mechanical fuse
• Three material choices for replacement discs
• Electrically isolating
• Balanced design for higher speeds up to 4,500 rpm
• Zero backlash (acetal disc only)
• Anodized aluminum hubs
• Temperature Range: -10 °F to 150 °F (Acetal); -10 °F to 130 °F (Nylon)
• Two hubs and one torque disc with the same O.D. make a complete coupling
• More sizes available
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Torque Disc
O.D.
(in) Use With Material Item No. Mfr. No.
3/4 OD12 Disc Black Acetal 101903789 OD12/19-AT
Black Acetal 101904543 OD26/41-AT
1 5/8 OD26 Disc
Nylon 11 101904049 OD26/41-NL
2 OD32 Disc Black Acetal 101933037 OD32/51-AT
Full range of aluminum and stainless steel hubs in clamp or setscrew style with or without keyway available.
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 459
Power Transmission
Features:
• Dampens shock and vibration
• Three spider materials available: hard, moderate and soft (only hard and moderate shown)
• Electrically isolating
• Balanced design for high speeds up to 8,000 rpm
• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
• To make a complete coupling: choose two hubs and one spider with the same O.D.
Hub Spider
Hub Spider
Polished Aluminum Polyurethane
Overall Bore Durometer: 92 Shore A Durometer: 98 Shore A
O.D. Length Size -10 °F to 180 °F
(in) (in) Use With (in) Item No. Mfr. No. O.D. -10 °F to 180 °F -10 °F to 180 °F
1/4 101908139 JC16-4-A (in) Use With Item No. Mfr. No. Item No. Mfr. No.
1.000 1.390 JD16 Spider 3/8 101903793 JC16-6-A 1.000 JC16 Hubs 101904097 JD16/25-92Y 101903358 JD16/25-98R
1/2 101904245 JC16-8-A 1.625 JC26 Hubs 101904547 JD26/41-92Y 101904247 JD26/41-98R
1.625 2.086 JD26 Spider 5/8 101905127 JC26-10-A 2.250 JC36 Hubs — — 101904053 JD36/57-98R
WARNING: This product can expose you to etylene thiourea, nickel (metallic) and WARNING: This product can expose you to etylene thiourea, nickel (metallic) and
bisphenol A, known to the State of California to cause cancer, birth defects or other bisphenol A, known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov. reproductive harm. For more information go to www.P65Warnings.ca.gov.
460 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 461
Power Transmission
Inch
Cast Iron
Coupling O.D. Max. Bore Size Hub Length Coupling O.D. Max. Bore Size Hub Length
Size (in) RPM (in) (in) Item No. Mfr. No. Size (in) RPM (in) (in) Item No. Mfr. No.
5/8 29/64 100814316 5S 5/8 2 1/8 3/4 100814432 8S 2 1/8
8S 5.450 4,500
3/4 29/64 100814315 5S 3/4 2 3/8 11/32 100814433 8S 2 3/8
13/16 29/64 100814310 5S 13/16 23/32 100814445 8SC44
7/8 29/64 100814317 5S 7/8 8SC 5.450 4,500 1 7/8 1 1/32 100814446 8SC50
15/16 29/64 100814311 5S 15/16 1 23/32 100814443 8SC35
5S 3.250 7,600
1 29/64 100814305 5S 1 9B 6.350 3,750 2 — 100814448 9B-SD
1 1/16 29/64 100814306 5S 1 1/16 1 25/32 100814464 9S 1
1 1/8 29/64 100814308 5S 1 1/8 1 1/8 25/32 100814467 9S 1 1/8
1 3/16 29/64 100814309 5S 1 3/16 1 1/4 25/32 100814466 9S 1 1/4
1 1/4 29/64 100814307 5S 1 1/4 1 3/8 25/32 100814471 9S 1 3/8
5SC 3.250 7,600 1 1/8 1 3/32 100814319 5SC35 1 7/16 25/32 100814473 9S 1 7/16
6B 4.000 6,000 1 3/16 — 100814320 6B-JA 1 1/2 25/32 100814465 9S 1 1/2
3/4 17/32 100814358 6S 3/4 1 9/16 25/32 100814475 9S 1 9/16
7/8 17/32 100814361 6S 7/8 1 5/8 25/32 100814472 9S 1 5/8
15/16 17/32 100814354 6S 15/16 1 11/16 25/32 100814468 9S 1 11/16
1 17/32 100814342 6S 1 9S 6.350 3,750 1 3/4 25/32 100814470 9S 1 3/4
1 1/16 17/32 100814343 6S 1 1/16 1 7/8 25/32 100814474 9S 1 7/8
1 1/8 17/32 100814346 6S 1 1/8 1 15/16 25/32 100814469 9S 1 15/16
1 3/16 17/32 100814347 6S 1 3/16 2 25/32 100967746 9S 2
6S 4.000 6,000
1 1/4 17/32 100814345 6S 1 1/4 2 1/8 25/32 100814477 9S 2 1/8
1 5/16 17/32 100814350 6S 1 5/16 2 3/16 25/32 100814478 9S 2 3/16
1 3/8 17/32 100814349 6S 1 3/8 2 1/4 25/32 100967748 9S 2 1/4
1 7/16 17/32 100814352 6S 1 7/16 2 3/8 25/32 100814479 9S 2 3/8
1 1/2 17/32 100814344 6S 1 1/2 2 1/2 25/32 100814476 9S 2 1/2
1 5/8 17/32 100814351 6S 1 5/8 2 7/8 1 1/4 100814480 9S 2 7/8
1 3/4 17/32 100814348 6S 1 3/4 1 1/32 100814487 9SC35
1 1/32 100814364 6SC44 9SC 6.350 3,750 2 1/8 2 13/32 100814488 9SC44
6SC 4.000 6,000 1 3/8 1 7/32 100814363 6SC35 2 23/32 100814489 9SC50
1 11/32 100814365 6SC50 10B 7.500 3,600 2 5/8 5/8 100814158 10B-SK
7B 4.625 5,250 1 3/16 — 100814366 7B-JA 1 1/8 13/16 100967749 10S 1 1/8
3/4 11/16 100814393 7S 3/4 1 1/4 13/16 100814171 10S 1 1/4
7/8 11/16 100814397 7S 7/8 1 3/8 13/16 100814175 10S 1 3/8
15/16 11/16 100814390 7S 15/16 1 7/16 13/16 100814177 10S 1 7/16
1 11/16 100814379 7S 1 1 1/2 13/16 100814170 10S 1 1/2
1 1/16 11/16 100814380 7S 1 1/16 1 5/8 13/16 100814176 10S 1 5/8
1 1/8 11/16 100814383 7S 1 1/8 1 11/16 13/16 100814172 10S 1 11/16
1 3/16 11/16 100814384 7S 1 3/16 1 3/4 13/16 100814174 10S 1 3/4
7S 4.625 5,250 1 1/4 11/16 100814382 7S 1 1/4 1 7/8 13/16 100814178 10S 1 7/8
1 5/16 11/16 100814386 7S 1 5/16 10S 7.500 3,600 1 15/16 13/16 100814173 10S 1 15/16
1 3/8 11/16 100814385 7S 1 3/8 2 13/16 100814179 10S 2
1 7/16 11/16 100814388 7S 1 7/16 2 1/8 13/16 100814182 10S 2 1/8
1 1/2 11/16 100814381 7S 1 1/2 2 3/16 13/16 100814183 10S 2 3/16
1 5/8 11/16 100814387 7S 1 5/8 2 1/4 13/16 100814181 10S 2 1/4
1 3/4 11/16 100967738 7S 1 3/4 2 3/8 13/16 100814184 10S 2 3/8
1 7/8 11/16 100814389 7S 1 7/8 2 7/16 13/16 100814185 10S 2 7/16
29/32 100814400 7SC44 2 1/2 13/16 100814180 10S 2 1/2
7SC 4.625 5,250 1 5/8 1 7/32 100814401 7SC50 2 7/8 13/16 100814186 10S 2 7/8
1 15/32 100814399 7SC35 3 3/8 1 9/16 100814187 10S 3 3/8
8B 5.450 4,500 1 11/16 — 100814402 8B-SH 11/32 100814190 10SC48
10SC 7.500 3,600 2 3/8
7/8 3/4 100814441 8S 7/8 15/32 100814191 10SC50
15/16 3/4 100814431 8S 15/16 11B 8.625 3,600 2 15/16 5/8 100814194 11B-SF
1 3/4 100814417 8S 1 1 1/4 1 1/8 100814205 11S 1 1/4
1 1/8 3/4 100814420 8S 1 1/8 1 3/8 1 1/8 100967755 11S 1 3/8
1 3/16 3/4 100814423 8S 1 3/16 1 5/8 1 1/8 100814207 11S 1 5/8
1 1/4 3/4 100814419 8S 1 1/4 1 3/4 1 1/8 100814206 11S 1 3/4
1 5/16 3/4 100814427 8S 1 5/16 1 7/8 1 1/8 100814208 11S 1 7/8
11S 8.625 3,600
8S 5.450 4,500 1 3/8 3/4 100814426 8S 1 3/8 2 1/8 1 1/8 100814209 11S 2 1/8
1 7/16 3/4 100814429 8S 1 7/16 2 3/8 1 1/8 100814210 11S 2 3/8
1 1/2 3/4 100814418 8S 1 1/2 2 7/8 1 1/8 100814211 11S 2 7/8
1 5/8 3/4 100814428 8S 1 5/8 3 3/8 1 1/8 100814212 11S 3 3/8
1 11/16 3/4 100814421 8S 1 11/16 3 7/8 1 9/16 100814213 11S 3 7/8
1 3/4 3/4 100814424 8S 1 3/4 1/32 100814216 11SC48
11SC 8.625 3,600 2 7/8
1 7/8 3/4 100814430 8S 1 7/8 1/16 100814217 11SC50
1 15/16 3/4 100814422 8S 1 15/16 Continued on next page.
462 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 463
Power Transmission
Continued from previous page.
Coupling Size Insert Style Sleeve Type Item No. Mfr. No. Coupling Size Insert Style Sleeve Type Item No. Mfr. No.
11 Two Piece E 100814195 11E One Piece JN 111902188 3JN
3
12 Two Piece E 100814221 12E One Piece Split JNS 111902234 3JNS
13 Two Piece E 100814243 13E One Piece JN 111902271 4JN
4
14 Two Piece E 100814256 14E One Piece Split JNS 111902270 4JNS
16 Two Piece E 100814266 16E One Piece JN 111902265 5JN
5 One Piece Split JNS 111902273 5JNS
Material: Hytrel® Two Piece N 111902269 5N
One Piece JN 111902201 6JN
Coupling Size Insert Style Sleeve Type Item No. Mfr. No.
6 One Piece Split JNS 111902200 6JNS
One Piece H 100814322 6H Two Piece N 111902259 6N
6
Two Piece HS 100814330 6HS One Piece JN 111902192 7JN
One Piece H 100814368 7H 7 One Piece Split JNS 111902191 7JNS
7
Two Piece HS 100814376 7HS Two Piece N 111902204 7N
One Piece H 100814404 8H One Piece JN 111902215 8JN
8
Two Piece HS 100814414 8HS 8 One Piece Split JNS 111902214 8JNS
One Piece H 100814450 9H Two Piece N 111902217 8N
9
Two Piece HS 100814460 9HS 9 Two Piece N 111902220 9N
One Piece H 100814160 10H 10 Two Piece N 111902256 10 N
10
Two Piece HS 100814166 10HS 11 Two Piece N 100817837 11 N
One Piece H 100814196 11H 12 Two Piece N 100814493 12 N
11
Two Piece HS 100814202 11HS 13 Two Piece N 102149929 13 N
One Piece H 100814222 12H 14 Two Piece N 100814495 14 N
12
Two Piece HS 100814228 12HS
13 Two Piece HS 100814248 13HS
14 Two Piece HS 100814261 14HS Continued on next page.
464 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Coupling Size Insert Style Sleeve Type Item No. Mfr. No.
One Piece JEM 100814273 3JEM
3
One Piece Split JEMS 100814274 3JEMS
One Piece JEM 100814286 4JEM
4 One Piece Split JEMS 100814287 4JEMS
Two Piece EM 100814275 4EM
One Piece JEM 100814303 5JEM
5 One Piece Split JEMS 100814304 5JEMS
Two Piece EM 100814289 5EM
One Piece JEM 100814340 6JEM
6 One Piece Split JEMS 100814341 6JEMS
Two Piece EM 100814321 6EM
One Piece JEM 100814377 7JEM
7 One Piece Split JEMS 100814378 7JEMS
Two Piece EM 100814367 7EM
One Piece JEM 100814415 8JEM
8 One Piece Split JEMS 100814416 8JEMS
Two Piece EM 100814403 8EM
One Piece JEM 100814462 9JEM
9 One Piece Split JEMS 100814463 9JEMS
Two Piece EM 100814449 9EM
One Piece JEM 100814168 10JEM
10 One Piece Split JEMS 100814169 10JEMS
Two Piece EM 100814159 10EM
S-Flex Endurance® shear type coupling EPDM inserts are the best performing in the market today lasting at least three times longer than the previous design. Interchangeable with
the industry standard. Flange sizes and styles available online.
Material: EPDM
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 465
Power Transmission
Omega Close Coupled Coupling Element
Features:
• Split-in-half flex element design
• Allows disassembly and replacement without disturbing hubs or connected equipment
• Transmits torque
• Accepts misalignment
• Reduces vibration and noise
• Not seriously affected by petroleum products or most chemicals
• In addition to general purpose (orange), also available in Heavy Duty Yellow (HDY) and Hydrolytically Stable Green (HSU)
Material: Polyurethane
Color: Orange
Temperature Range: -40 °F to 200 °F
Features:
• Reversible hub accommodates different shaft spacing requirements
• Interchangeable for both closed coupled and spacer coupling elements
Min. Max.
Bore Dia. Bore Dia. O.D. Max.
Coupling Size (in) (in) (in) RPM Item No. Mfr. No.
2 1/2 1.125 1.85 7,500 101468041 2SHRB STD HUB
3 1/2 1.375 2.32 7,500 101467124 3SHRB STD HUB
4 1/2 1.625 2.60 7,500 101468203 4SHRB STD HUB
5 5/8 1.875 3.13 7,500 101466954 5SHRB STD HUB
10 5/8 2.125 3.65 7,500 101467755 10SHRB STD HUB
15 5/8 2.125 3.65 7,500 116473533 15SHRB STD HUB
20 3/4 2.325 4.48 6,600 101489085 20SHRB STD HUB
30 3/4 2.875 5.42 5,800 101468906 30SHRB STD HUB
40 3/4 3.375 6.63 5,000 101466839 40SHRB STD HUB
50 1 1/8 3.625 8.13 4,200 101468243 50SHRB STD HUB
60 1 1/8 4.000 8.75 3,800 101475685 60SHRB STD HUB
70 1 3/8 4.500 9.25 3,600 101468908 70SHRB STD HUB
80 1 3/8 6.000 11.25 2,000 101468244 80SHRB STD HUB
466 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Omega Finished Bore Coupling Hub
Standard Para-Flex® Coupling Element
Features: Features:
• Reversible hub accommodates different • Industry leading misalignment capabilities
shaft spacing requirements • Proprietary torque carrying tension cords
• Interchangeable for both closed coupled • End split reinforcement for increased torque ratings and life
and spacer coupling elements • Five-year warranty
• Dampens torsional vibrations to protect connected equipment
• No lubrication required
• ATEX certified
Max.
Torque
Coupling I.D. O.D. Max. Rating Material: Natural Rubber
Size (in) (in) RPM (in lb) Item No. Mfr. No. Temperature Range: -45 °F to 180 °F
5/8 1.850 7,500 190 101467958 2SHSB5/8STD HUB O.D.
7/8 1.850 7,500 190 101467000 2SHSB7/8STD HUB Coupling Size (in) Item No. Mfr. No.
2
1 1.850 7,500 190 101468196 2SHSB1STD HUB PX40 4.25 100943699 PX40ELEMENT
1 1/8 1.850 7,500 190 101475681 2SHSB1 1/8STD HUB PX50 5.25 100813058 PX50ELEMENT
5/8 2.320 7,500 365 101469392 3SHSB5/8STD HUB PX60 6.50 100813061 PX60ELEMENT
7/8 2.320 7,500 365 101467887 3SHSB7/8STD HUB PX70 7.38 100813064 PX70ELEMENT
3 1 2.320 7,500 365 101515792 3SHSB1STD HUB PX80 8.38 102026099 PX80ELEMENT
1 1/8 2.320 7,500 365 101467952 3SHSB1 1/8STD HUB PX90 9.25 100813072 PX90ELEMENT
1 3/8 2.320 7,500 365 101469970 3SHSB1 3/8STD HUB PX100 10.00 100813076 PX100ELEMENT
7/8 2.600 7,500 550 101469391 4SHSB7/8STD HUB PX110 11.00 101991493 PX110ELEMENT
1 2.600 7,500 550 101469389 4SHSB1STD HUB PX120 12.38 100813080 PX120ELEMENT
4 1 1/8 2.600 7,500 550 101468920 4SHSB1 1/8STD HUB PX140 14.13 100813084 PX140ELEMENT
1 3/8 2.600 7,500 550 101515791 4SHSB1 3/8STD HUB PX160 16.63 100813088 PX160ELEMENT
1 5/8 2.600 7,500 550 101468195 4SHSB1 5/8STD HUB PX200 20.00 100813093 PX200ELEMENT
7/8 3.125 7,500 925 102180277 5SHSB7/8STD HUB PX240 24.13 100813098 PX240ELEMENT
1 3.125 7,500 925 101468064 5SHSB1STD HUB PX280 28.50 100813100 PX280ELEMENT
1 1/8 3.125 7,500 925 101469068 5SHSB1 1/8STD HUB PX320 32.50 100943696 PX320ELEMENT
5
1 3/8 3.125 7,500 925 101467629 5SHSB1 3/8STD HUB
1 5/8 3.125 7,500 925 101475683 5SHSB1 5/8STD HUB
1 7/8 3.125 7,500 925 101468197 5SHSB1 7/8STD HUB
1 3.650 7,500 1,450 102205319 10SHSB1STD HUB
1 1/8 3.650 7,500 1,450 101468923 10SHSB1 1/8STD HUB
1 3/8 3.650 7,500 1,450 101466978 10SHSB1 3/8STD HUB
10 1 5/8 3.650 7,500 1,450 101467630 10SHSB1 5/8STD HUB
1 11/16 3.650 7,500 1,450 102123050 10SHSB1 11/16STD H
1 7/8 3.650 7,500 1,450 101515793 10SHSB1 7/8STD HUB
2 1/8 3.650 7,500 1,450 101471114 10SHSB2 1/8STD HUB Para-Flex® Coupling Flange
1 1/8 4.480 6,600 2,300 101455513 20SHSB1 1/8STD HUB
1 3/8 4.480 6,600 2,300 101467744 20SHSB1 3/8STD HUB
1 5/8 4.480 6,600 2,300 101467872 20SHSB1 5/8STD HUB
20
1 7/8 4.480 6,600 2,300 101467341 20SHSB1 7/8STD HUB
2 1/8 4.480 6,600 2,300 101468921 20SHSB2 1/8STD HUB
2 3/8 4.480 6,600 2,300 101466845 20SHSB2 3/8STD HUB Features:
1 5/8 5.420 5,800 3,650 101466498 30SHSB1 5/8STD HUB • Reversible flanges for sizes PX50 to PX120
1 7/8 5.420 5,800 3,650 101462600 30SHSB1 7/8STD HUB • Standard taper lock bushings for easy
30 installation and removal
2 1/8 5.420 5,800 3,650 101468204 30SHSB2 1/8STD HUB • Compact design
2 3/8 5.420 5,800 3,650 101456436 30SHSB2 3/8STD HUB
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 467
Power Transmission
Raptor Element
Features:
• Patented natural rubber WingLock™ element design results in higher bond strength, improved fatigue resistance and up
to 5.9x longer life than competitive urethane designs
• Drop-in interchange works in existing applications without any modifications or additional materials
• Industry leading misalignment capabilities
• Natural rubber offers 50% lower torsional and bending stiffness for lower vibration and better shock damping
• Backed by an industry leading five-year warranty
• Armored element available for extra protection from harsh environments Material: Natural Rubber
Coupling Size Element Style Type Item No. Mfr. No. Coupling Size Element Style Type Item No. Mfr. No.
Standard 112293033 E2 ELEMENT Standard 112293040 E40 ELEMENT
E2 Split Tire Armored 112363167 E2 ARMORED ELEMENT E40 Split Tire Armored 112363172 E40 ARMORED ELEMENT
Spacer 112363179 ES2 SPACER ELEMENT Spacer 112363184 ES40 SPACER ELEMENT
Standard 112293034 E3 ELEMENT Standard 112293041 E50 ELEMENT
E3 Split Tire Armored 112363169 E3 ARMORED ELEMENT E50 Split Tire Armored 112363174 E50 ARMORED ELEMENT
Spacer 112363181 ES3 SPACER ELEMENT Spacer 112363186 ES50 SPACER ELEMENT
Standard 112293035 E4 ELEMENT Standard 112293042 E60 ELEMENT
E4 Split Tire Armored 112363171 E4 ARMORED ELEMENT E60 Split Tire Armored 112363175 E60 ARMORED ELEMENT
Spacer 112363183 ES4 SPACER ELEMENT Spacer 112363187 ES60 SPACER ELEMENT
Standard 112293036 E5 ELEMENT Standard 112293043 E70 ELEMENT
E5 Split Tire Armored 112363173 E5 ARMORED ELEMENT E70 Split Tire Armored 112363176 E70 ARMORED ELEMENT
Spacer 112363185 ES5 SPACER ELEMENT Spacer 112363188 ES70 SPACER ELEMENT
Standard 112293037 E10 ELEMENT Standard 112293044 E80 ELEMENT
E10 Split Tire Armored 112363166 E10 ARMORED ELEMENT E80 Split Tire Armored 112363177 E80 ARMORED ELEMENT
Spacer 112363178 ES10 SPACER ELEMENT Spacer 112363189 ES80 SPACER ELEMENT
Standard 112293038 E20 ELEMENT Standard 113337738 E100 ELEMENT
E100 Split Tire
E20 Split Tire Armored 112363168 E20 ARMORED ELEMENT Armored 113337737 E100 ARMORED ELEMENT
Spacer 112363180 ES20 SPACER ELEMENT Standard 113337743 E120 ELEMENT
E120 Split Tire
Standard 112293039 E30 ELEMENT Armored 113337742 E120 ARMORED ELEMENT
E30 Split Tire Armored 112363170 E30 ARMORED ELEMENT Standard 113337748 E140 ELEMENT
E140 Split Tire
Spacer 112363182 ES30 SPACER ELEMENT Armored 113337747 E140 ARMORED ELEMENT
Features:
• Finished bore, taper-lock, and QD bushed hubs for easy installation and removal
• Reversible hubs accommodate a wide range of shaft gaps
• Finished bore hubs use two setscrews at 65° for a 75% increase holding power increase versus competitive designs
468 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Material: Polyurethane
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 469
Power Transmission
Lifelign Gear Coupling
Features: Applications:
• Built to last longer • Bulk handling systems
• Superior lubrication, grease and four-point seal extends life and reduces • Paper machines
maintenance • Fans
• Triple-crowned teeth have crowns on all working portions of the teeth • Pumps
• Accommodates misalignment and movement • Cranes
• Interchangeable half-for-half with other standard AGMA brands • Mixers
• Largest maximum bore in the market • Sugar mills
• Falk Long Term Grease (LTG) eliminates routine lubrication cycles for up • Crushers
to three years
• Reduces maintenance costs and downtime
• One-year factory warranty; Three-year factory warranty when Falk LTG
is used
• High torque ratings
• Grade 8 fasteners for added strength
• Prevailing torque locknuts (PTL) eliminate need of lockwashers
• Nonturning locknut allows installation with only one wrench
Hub – Rough Stock Bore
Max.
Min. Max. Torque
Bore Bore Max. Rating
Coupling Size (in) (in) RPM (in lb) Item No. Mfr. No.
1010G 1/2 1 7/8 8,000 10,800 102099800 1010G HUB RB
1015G 3/4 2 3/8 6,500 20,790 102110524 1015G FLEX HUB RSB
1020G 1 2 7/8 5,600 37,800 102110253 1020G FLEX HUB RB
1025G 1 1/4 3 5/8 5,000 66,150 102109851 1025G FLEX HUB RB
1030G 1 1/2 4 1/8 4,400 107,100 102109855 1030G FLEX HUB RB
1035G 2 4 7/8 3,900 163,800 102110662 1035G HUB RB
1040G 2 1/2 5 3/4 3,600 270,900 102142324 1040G HUB RB
1045G 3 6 3/4 3,200 371,700 102109381 1045G HUB RB
470 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features:
• Torque capacity in excess of the torque normally
transmitted by shafting which falls within the
coupling bore range
Min. Max.
Chain No. Bore Bore No. of
No. Teeth (in) (in) Item No. Mfr. No. Chain No. Links Item No. Mfr. No.
12 7/16 .750 100813621 4012 12 100813739 4012CHN
40 40
16 5/8 1.312 100813625 4016 16 100813753 4016CHN
16 5/8 1.687 100813634 5016 16 100813754 5016CHN
50 50
18 3/4 2.00 100813647 5018 18 100813743 5018CHN
18 1 2.437 100813661 6018 18 100813755 6018CHN
60 60
20 1 1/8 2.75 100813679 6020 20 100813756 6020CHN
80 18 1 1/8 3.125 100813701 8018 80 18 100813758 8018CHN
Features:
• Torque capacity in excess of the torque normally transmitted by shafting which
falls within the coupling bore range
Chain No. Bushing Min. Bore Max. Bore Bushing Entry: Hub Side Bushing Entry: Tooth Side
No. Teeth Series (in) (in) Item No. Mfr. No. Item No. Mfr. No.
40 16 1108 1/2 1 1/8 100813723 4016TBH 100813722 4016TBF
50 18 1610 1/2 1 5/8 100813726 5018TBH 100813725 5018TBF
60 20 2012 1/2 2 100813729 6020TBH 100813728 6020TBF
Features:
• Torque capacity in excess of the torque normally
transmitted by shafting which falls within the
coupling bore range Chain No. Min. Bore
No. Teeth (in) Item No. Mfr. No.
3/4 100813659 5018 3/4
7/8 100813660 5018 7/8
1 100813648 5018 1
1 1/8 100813651 5018 1 1/8
Chain No. Min. Bore 1 1/4 100813650 5018 1 1/4
No. Teeth (in) Item No. Mfr. No. 50 18 1 3/8 100813655 5018 1 3/8
5/8 100813632 4016 5/8 1 7/16 100813657 5018 1 7/16
3/4 100813631 4016 3/4 1 1/2 100813649 5018 1 1/2
7/8 100813633 4016 7/8 1 5/8 100813656 5018 1 5/8
40 16
1 100813626 4016 1 1 3/4 100813654 5018 1 3/4
1 1/8 100813628 4016 1 1/8 1 15/16 100813652 5018 1 15/16
1 1/4 100813627 4016 1 1/4 1 100813662 6018 1
3/4 100813645 5016 3/4 1 1/8 100813665 6018 1 1/8
7/8 100813646 5016 7/8 1 1/4 100813664 6018 1 1/4
1 100813635 5016 1 1 3/8 100813669 6018 1 3/8
1 1/8 100813640 5016 1 1/8 1 7/16 100813671 6018 1 7/16
60 18
50 16 1 1/4 100813638 5016 1 1/4 1 1/2 100813663 6018 1 1/2
1 3/8 100813642 5016 1 3/8 1 5/8 100813670 6018 1 5/8
1 7/16 100813644 5016 1 7/16 1 3/4 100813668 6018 1 3/4
1 1/2 100813637 5016 1 1/2 1 15/16 100813666 6018 1 15/16
1 5/8 100813643 5016 1 5/8 2 100813673 6018 2
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 471
Power Transmission
Steelflex Grid Coupling Finished Bore Hub
Features:
• Torsionally deflects when subjected to normal shock or vibratory loads
• Provides flexible accommodation to changing load conditions
• Grid can be replaced without moving hubs or connected equipment
• Bores are supplied with a standard clearance fit per ANSI/AGMA 9002, with a setscrew over
the keyway
Max. Length
Torque Max. RPM Max. RPM Through
Bore Dia. Rating w/ Horizontal w/ Vertical Hub Dia. Bore
Coupling Size (in) (in lb) HP @ RPM Cover Cover (in) (in) Item No. Mfr. No.
1/2 460 0.67 @ 100 4,500 6,000 1 9/16 1 7/8 102110582 1020T1/2HUB
1020T 1 460 0.67 @ 100 4,500 6,000 1 9/16 1 7/8 102110302 1020T1HUB
1 1/8 460 0.67 @ 100 4,500 6,000 1 9/16 1 7/8 102112342 1020T1 1/8HUB
1 1,320 1.9 @ 100 4,500 6,000 1 15/16 1 7/8 100815060 1030T1HUB
1 1/8 1,320 1.9 @ 100 4,500 6,000 1 15/16 1 7/8 100815061 1030T1 1/8HUB
1030T
1 1/4 1,320 1.9 @ 100 4,500 6,000 1 15/16 1 7/8 102128815 1030T1 1/4HUB
1 3/8 1,320 1.9 @ 100 4,500 6,000 1 15/16 1 7/8 100815063 1030T1 3/8HUB
1 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815087 1040T1HUB
1 1/8 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815088 1040T1 1/8HUB
1 1/4 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815090 1040T1 1/4HUB
1040T
1 3/8 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815091 1040T1 3/8HUB
1 1/2 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815092 1040T1 1/2HUB
1 5/8 2,200 3.2 @ 100 4,500 6,000 2 1/4 2 100815093 1040T1 5/8HUB
1 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 100815116 1050T1HUB
1 1/8 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102129190 1050T1 1/8HUB
1 1/4 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102128195 1050T1 1/4HUB
1 3/8 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102140060 1050T1 3/8HUB
1050T
1 1/2 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 100815122 1050T1 1/2HUB
1 5/8 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102128424 1050T1 5/8HUB
1 3/4 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102110313 1050T1 3/4HUB
1 7/8 3,850 5.6 @ 100 4,500 6,000 2 5/8 2 3/8 102112352 1050T1 7/8HUB
1 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815147 1060T1HUB
1 1/8 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815148 1060T1 1/8HUB
1 1/4 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 102151162 1060T1 1/4HUB
1 3/8 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 102127852 1060T1 3/8HUB
1 1/2 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815153 1060T1 1/2HUB
1060T
1 5/8 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815154 1060T 1 5/8 HUB
1 3/4 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815155 1060T1 3/4HUB
1 7/8 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 102128012 1060T1 7/8HUB
2 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815159 1060T2HUB
2 1/8 6,050 8.7 @ 100 4,350 6,000 3 2 1/2 100815161 1060T2 1/8HUB
1 8,800 13 @ 100 4,125 5,500 3 7/16 3 102110317 1070T1HUB
1 1/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 102128428 1070T1 1/8HUB
1 1/4 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815450 1070T1 1/4HUB
1 3/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 102112360 1070T1 3/8HUB
1 1/2 8,800 13 @ 100 4,125 5,500 3 7/16 3 102112363 1070T1 1/2HUB
1 5/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815177 1070T1 5/8HUB
1070T 1 3/4 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815178 1070T1 3/4HUB
1 7/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815181 1070T1 7/8HUB
2 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815182 1070T2HUB
2 1/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815183 1070T2 1/8HUB
2 1/4 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815184 1070T2 1/4HUB
2 3/8 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815186 1070T2 3/8HUB
2 1/2 8,800 13 @ 100 4,125 5,500 3 7/16 3 100815187 1070T2 1/2HUB
1 1/4 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102001337 1080T1 1/4HUB
1 3/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 101977576 1080T1 3/8HUB
1 1/2 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102130537 1080T1 1/2HUB
1 5/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102112365 1080T1 5/8HUB
1 3/4 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815205 1080T1 3/4HUB
1 7/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102128198 1080T1 7/8HUB
2 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815206 1080T2HUB
2 1/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815207 1080T2 1/8HUB
1080T
2 1/4 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815210 1080T2 1/4HUB
2 3/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815211 1080T2 3/8HUB
2 1/2 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815213 1080T2 1/2HUB
2 5/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102128199 1080T2 5/8HUB
2 3/4 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815214 1080T2 3/4HUB
2 7/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102110319 1080T2 7/8HUB
3 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 100815454 1080T3HUB
3 3/8 18,150 26 @ 100 3,600 4,750 4 1/8 3 1/2 102110712 1080T3 3/8HUB
472 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Features:
• Torsionally deflects when subjected to normal shock or vibratory loads
• Provides flexible accommodation to changing load conditions
• Grid can be replaced without moving hubs or connected equipment
Max. Bore Max. Torque Max. RPM Max. RPM Length Through
Dia. Rating w/ Horizontal w/ Vertical Hub Dia. Bore
Coupling Size (in) (in lb) Cover Cover (in) (in) Item No. Mfr. No.
1020T 1 1/8 460 4,500 6,000 1 9/16 1 7/8 100815036 1020T HUB RB
1030T 1 3/8 1,320 4,500 6,000 1 15/16 1 7/8 100815057 1030T HUB RB
1040T 1 5/8 2,200 4,500 6,000 2 1/4 2 102128004 1040T HUB RB
1050T 1 7/8 3,850 4,500 6,000 2 5/8 2 3/8 102129029 1050T HUB RB
1060T 2 1/8 6,500 4,350 6,000 3 2 1/2 102110707 1060T HUB RB
1070T 2 1/2 8,800 4,125 5,500 3 7/16 3 102110593 1070T HUB RB
1080T 3 18,150 3,600 4,750 4 1/8 3 1/2 102127855 1080T HUB RB
1090T 3 1/2 33,000 3,600 4,000 4 7/8 3 7/8 102129037 1090T HUB RB
1100T 4 50,500 2,440 3,250 5 19/32 4 3/4 102129114 1100T HUB RB
1110T 4 1/2 75,000 2,250 3,000 6 5/16 5 102151171 1110T HUB RB
1120T 5 110,000 2,025 N/A 7 1/16 5 7/8 102111666 1120T HUB RB
1130T 6 160,000 1,800 N/A 8 9/16 6 3/8 102128111 1130T HUB RB
Caution: Features:
• Replace-in-place design • Replace-in-place design eliminates need for realignment
eliminates need for • Free to rock, pivot and float
realignment • High strength alloy steel grids are quenched and tempered
to spring hardness
• Grid can be replaced without moving hubs or connected
equipment
Horizontal Split Vertical Split
Horizontal Split Vertical Split
Aluminum Steel
Coupling O.D. Max. O.D. Max.
Size Item No. (in) RPM Item No. (in) RPM Coupling Size Item No. Mfr. No.
1020T 102126745 4.000 4,500 100815034 4.420 6,000 1020T 102126914 1020T GRIDMEMBER
1030T 100815052 4.375 4,500 102110303 4.800 6,000 1030T 102128817 1030T GRIDMEMBER
1040T 102110307 4.625 4,500 100815082 5.063 6,000 1040T 102129109 1040T GRIDMEMBER
1050T 102140058 5.438 4,500 102128009 5.820 6,000 1050T 102128425 1050T GRIDMEMBER
1060T 100815142 5.938 4,350 100815144 6.375 6,000 1060T 102140062 1060T GRIDMEMBER
1070T 100815172 6.375 4,125 100815174 6.813 5,500 1070T 102130618 1070T GRIDMEMBER
1080T 100815198 7.625 3,600 100815201 7.875 4,750 1080T 102110597 1080T GRIDMEMBER
1090T 100815232 8.375 3,600 100815234 9.125 4,000 1090T 102151169 1090T GRIDMEMBER
1100T 102112298 9.875 2,440 100815262 10.550 3,600 1100T 102130545 1100T GRIDMEMBER
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 473
Power Transmission
Steelflex Cover Grid Assemblies
Features:
• Replace-in-place design eliminates need for realignment
• Cover-grid assembly includes: cover, grid, seals and gaskets
Features:
• Seal rings and cover gaskets to seal lubricants in the coupling and keep contaminants out
474 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Skirtboarding Alligator® Transmission Lacing
60 durometer Plioflex rubber compound with extra stiffness for efficient belt wiping
and cleaning.
Features:
• Resistant to abrasion
• Long wearing Features:
• Stays stiff to reduce extra maintenance and cleanup • Alligator® Lacing is a continuous, one-piece fastener strip tailored to all standard
• Cannot delaminate or separate under severe flexing belt widths
and abrasion common to belt wiping service • Requires only a hammer; no special tools needed
• For belt wipers or plow blades when wet, sticky or • Low profile, one-piece design results in an exceptionally smooth joint
heavy material is being conveyed • Manufacturing assembly lines, food, package and parts handling, checkout
counters and agricultural equipment
Material: SBR Rubber • Set includes six sets per box with 6” strips, rocker hinge pins and
Durometer: 60 one gauge pin Material: Steel
Length: 50 ft
Belt Thickness
Thickness Width Belt Width Range
(in) (in) Item No. Mfr. No. Fastener Series (in) (in) Item No. Mfr. No.
4 102173303 SB60-2504 1 6 1/16 to 3/32 100849640 1A
1/4
6 102170798 SB60-2506
4 102171635 SB60-3804
3/8 6 102170463 SB60-3806
8 102170569 SB60-3808 Alligator® Ready Set™ Hinge Pin
4 102172726 SB60-5004
6 102170572 SB60-5006
1/2 8 102170571 SB60-5008
10 102171738 SB60-5010
12 102217694 SB60-5012
Nylon Covered Steel Cable
6 102172254 SB60-7506
3/4
8 102172573 SB60-7508 Length
6 102170568 SB60-1006 Fastener Series (ft) Item No. Mfr. No.
1
8 102171381 SB60-1008 RS125 10 100849749 NC1-X
Material: Steel
Hinge Pin Material: Nylon Covered Steel Cable
Ready Set™ staple conveyor belt fasteners reduce your installation time by Belt
eliminating an installation step. One-piece fastener strips arrive with staples Belt Thickness
preinserted in each fastener’s top plate. You never need to load loose staples into Fastener Width Range
an installation tool. Series (in) (in) Item No. Mfr. No.
12 1/8 to 3/16 100849711 RS125J12/300NC
Installation Method 18 1/8 to 3/16 100849714 RS125J18/450NC
A portable, lightweight application tool that can be easily carried to the jobsite. This 24 1/8 to 3/16 101912779 RS125J24/600NC
tool holds the belt and fastener while staples are driven with a hammer. Contact 125
30 1/8 to 3/16 101912950 RS125J30/750NC
your local Applied® service center for installation tools.
36 1/8 to 3/16 100849719 RS125J36/900NC
Fastener Profile 48 1/8 to 3/16 100849721 RS125J48NC
Smooth, low profile facilitates operation with diverters and shears. 18 3/16 to 1/4 100849695 RS187J18/450NC
24 3/16 to 1/4 100849697 RS187J24/600NC
Includes: 187 30 3/16 to 1/4 100849702 RS187J30/750NC
• Four steel fastener sets (four hinge pins and retaining washers with nylon-covered 36 3/16 to 1/4 100849700 RS187J36/900NC
steel cable pins) 48 3/16 to 1/4 100849704 RS187J48NC
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 475
Power Transmission
Alligator® Lacing Bolt Hinged Fastener
Features: For extendable belts where smaller pulley diameters are used, bolted hinged
• Alligator® Lacing is a continuous, one-piece fastener fasteners offer reliability plus a range of sizes. For most applications, plated steel is
strip tailored to all standard belt widths the recommended fastener material and is available in all sizes. Zinc plating helps
• Requires only a hammer; no special tools needed combat mild corrosion.
• Low profile, one-piece design results in an
exceptionally smooth joint Includes:
• One-piece fastener strip ensures no loose pieces • Two strips of fastener
to work themselves out of the belt and into the • Two pieces of filler tubing
conveyed product • Hinge pin
• Designed for belts from 1/32” to 1/2” (0.8 mm to 12.5 mm) • Gauge pin
• Installation requires no special tools • Two hinge pin washers
• Lacing is secured with teeth that embed lengthwise on the belt, providing a strong,
vise-like hold Material: Steel
• Clips hold gauge rod and lacing firmly and squarely against the belt, ensuring a
strong, straight splice Belt Thickness Belt
• Straight splice helps ease hinge pin insertion Fastener Range Width
• Manufacturing assembly lines, food, package and parts handling, checkout counters Series (in) (in) Item No. Mfr. No.
and agricultural equipment 18 100849833 375XJ18NC
Material: Steel 24 100849834 375XJ24NC
Pkg. Qty.: 4 375 1/4 to 13/32 30 100849835 375XJ30NC
36 100849836 375XJ36NC
Belt Thickness 48 100849838 375XJ48NC
Belt Width Range 20 100849846 550J24NC
Fastener Series (in) (in) Item No. Mfr. No. 30 100849847 550J30NC
1A 12 1/16 to 3/32 100849641 1A-12 550 1/4 to 5/8 36 100849848 550J36NC
12 3/32 to 9/64 100849646 7-12 42 100849849 550J42NC
7
24 3/32 to 9/64 110021722 7-24 48 100849850 550J48NC
12 1/8 to 5/32 101923204 15-12
18 1/8 to 5/32 110021724 15-18
15
24 1/8 to 5/32 101912899 15-24
36 1/8 to 5/32 101912192 15-36
20 24 5/32 to 3/16 101917239 20-24
Bolt Solid Plate Fastener
Features:
• Inexpensive, yet highly reliable solution for connecting conveyor belts
• Can be easily installed on-site by one person with easy to operate tools Features:
• Reduced operating noise • Engineered to meet the demands of the toughest material handling applications
• 12 carded hooks per box with pins • Provides a strong, sift-free splice and superior holding ability
Material: Galvanized • Sizes accommodate belts from 3/16” (5 mm) to over 13/16” (24 mm) thick
• High tensile strength bolts compress top and bottom plates to distribute splice
Belt tension evenly across the entire width of each fastener plate
Thickness • Specially formed teeth penetrate deep into the belt carcass without damaging
Fastener Length Range carcass fibers
Series (in) (in) Item No. Mfr. No. • Easily installed on-site using portable hand tools or power tools
3/16 to 7/32 100849579 3GNY • Exclusive piloted bolts also contribute to faster installation
5/16 to 11/32 100849586 6GW • Exclusive tapered tip cradles nuts securely in place
54 12 5/32 to 3/16 100849577 2GNY
7/32 to 1/4 100849581 4GNY Applications:
9/32 to 5/16 100849584 5GW • Sand
• Gravel
• Crushed stone
• Grain
• Coal
• Cement
• Salt
Material: Steel
Hinge Pin Retaining Washer for Alligator® Staple Belt Pkg. Qty.: 25 Pieces Pkg. Qty.: 100 Pieces
Eliminates problems associated with hinge pin migration with easy-to-install Thickness
retaining washers. Fastener Range
Series (in) Item No. Mfr. No. Item No. Mfr. No.
100849783 1E 100849782 1C
1 3/16 to 7/16
100849803 RP1Ea — —
1 1/2 7/16 to 11/16 102018238 1-1/2E 100849801 1-1/2C
Material: Stainless Steel 140 3/16 to 7/16 100849805 140E 100849962 140C
Pkg. Qty.: 50 Pieces 190 5/16 to 9/16 100849809 190E 100849970 190C
100849799 2E 100849798 2C
2 9/16 to 13/16
Fastener Series Item No. Mfr. No. 100849804 RP2Ea — —
125 100849722 125-RET-50 2 1/4 9/16 to 1 3/16 101887123 2-1/4E 101987157 2-1/4C
187 100849705 187-RET-50 a
Repair fasteners.
476 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Flexco® SR™ Scalloped Edge™ Fastener
Flexco® SR™ Scalloped Edge™ Fasteners feature a lower fastener profile and requires less effort for installation. The lower profile is the result of the fastener’s scalloped edge.
This greatly reduces the profile’s exposure to skirt rubbers, return idlers and cleaner blades, minimizing the effect of blade impact on fastener wear and tear and extending
the life of your belt splice.
Features:
• Significantly reduces the fastener’s exposure to
cleaner blades, skirt rubber and return idlers Material: Steel
• Provides maximum holding ability by allowing the
rivets to pass between the carcass fibers without Belt Thickness Belt
damaging them Fastener Range Width
• Self-setting rivets are installed from the top side of Series (in) (in) Item No. Mfr. No.
the belt for faster installation 18 100849874 R5-SE-18/450
• Joint can be separated simply by removing the 24 101912817 R5-SE-24/600
hinge pin
30 100849876 R5-SE-30/750
• Ideal for applications requiring frequent belt length R5 7/32 to 7/16
alterations 36 100849877 R5-SE-36/900
• Contact your local Applied® service center for 42 100849878 R5-SE-42/1050
installation tools 48 100849879 R5-SE-48/1200
*
Flexco Hinge Pin Rough Top Belt Skiver
Features:
• Durable, hand-operated tool
Nylon Covered Steel Cable • Permits lower fastener installation to minimize
Belt splice profile
Fastener Width Pkg. Qty.: 1 Piece Pkg. Qty.: 10 Pieces
• For quick and clean removal of rough top from
Series (in) Item No. Mfr. No. Item No. Mfr. No.
light- and medium-duty conveyor belting
18 101912885 NC-18-1 100849753 NC-18*
24 100849922 NC-24-1 100849921 NC-24*
375X 30 100849924 NC-30-1 100849923 NC-30* Item No. Mfr. No.
550
R5 36 100849926 NC-36-1 100849925 NC-36* 100849781 RTBS ROUGH TOP SKI
42 100849928 NC-42-1 — —
48 100849930 NC-48-1 100849929 NC-48*
Bolt Breaker Bolt Horn Boring Bit General Purpose 1018 Material
Dia. Keyway Length
(in) (in) (in) Item No. Mfr. No.
1/2 1/8 x 1/16 48 101719743 CFK1/2X48
5/8 3/16 x 3/32 48 101718016 CFK5/8X48
3/4 3/16 x 3/32 48 101720517 CFK3/4X48
Punch Wrench Quick Change Chuck 7/8 3/16 x 3/32 48 101720518 CFK7/8X48
48 101719304 CFK1X48
Tool 1 1/4 x 1/8
72 101720173 CFK1X72
Type Tool Name Fastener Series Item No. Mfr. No.
1 1/8 1/4 x 1/8 48 101766602 CFK1-1/8X48
1, 140, 190, 375, 550, RP1 100849895 110 1 3/16 1/4 x 1/8 48 101719744 CFK1-3/16X48
Bolt Breaker
1 1/2, 2, 2 1/4, RP2 100849902 112 1 1/4 1/4 x 1/8 48 101716535 CFK1-1/4X48
1, 1 1/2, 140, 190, 2, 2 1/4, RP1, 48 101720170 CFK1-3/8X48
Bolt Horn 100849913 2BH 1 3/8 5/16 x 5/32
RP2, SP6 72 101717922 CFK1-3/8X72
1, 140, 190, 375, 550, RP1 100849889 B1Ba 48 101718970 CFK1-7/16X48
Hand Boring Bit 1 7/16 3/8 x 3/16
Tool 1 1/2, 2, 2 1/4, RP2 100849898 B2Ba 72 101720172 CFK1-7/16X72
1, 140, 190, 375, 550, RP1 100849891 P1P 48 101718286 CFK1-1/2X48
Punch 1 1/2 3/8 x 3/16
1 1/2, 2, 2 1/4, RP2 100849900 P2P 72 101718017 CFK1-1/2X72
1, 140, 190, 375, 550, RP1 100849892 S1Sb 48 101725073 CFK1-11/16X48
Wrench 1 1/2, 2, 2 1/4, RP2 100849901 S2S 1 11/16 3/8 x 3/16
72 101718971 CFK1-11/16X72
375, 550 100849824 100c 48 101718287 CFK1-3/4X48
1, 140, 190, 375, 550, RP1 100849904 HB1a 1 3/4 3/8 x 3/16
Boring Bit 72 101719306 CFK1-3/4X72
1 1/2, 2, 2 1/4, RP2 100849905 HB2a 48 101719305 CFK1-15/16X48
1, 140, 190, 375, 550, RP1 100849896 HP1 1 15/16 1/2 x 1/4
Punch 72 101719475 CFK1-15/16X72
1 1/2, 2, 2 1/4, RP2 100849906 HP2 48 101720174 CFK2X48
Power 2 1/2 x 1/4
Tool Quick Change 72 101719745 CFK2X72
N/A 100849918 5552
Chuck 48 101720171 CFK2-3/16X48
2 3/16 1/2 x 1/4
1, 140, 190, RP1 100849893 HW1d 72 101718401 CFK2-3/16X72
Wrench 1 1/2, 2, 2 1/4, RP2 100849907 HW2 2 7/16 5/8 x 5/16 72 101725074 CFK2-7/16X72
375, 550 100849916 H100c 2 15/16 3/4 x 3/8 72 101718018 CFK2-15/16X72
a
Punches preferred for general use and when belt cover is over 3/16” thick. 3 7/16 7/8 x 7/16 72 101719581 CFK3-7/16X72
b
Use only stainless steel nuts when using S1S with 375X and 550 fasteners. 3 15/16 1 x 1/2 72 101720611 CFK3-15/16X72
c
For use with steel nuts only.
d
Use only stainless steel nuts when using HW1 with 375X and 550 fasteners. Continued on next page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 477
Power Transmission
Continued from previous page.
478 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 479
Power Transmission
Continued from previous page.
Martin rack is made from low carbon cold drawn steel. It is available in 14.5° and 20° Face Overall Pitch Line
pressure angle in 2’, 4’ and 6’ lengths. Allowance is made for cutting and machining. Diametral Width Thickness to Back Length
Pinions to run with the rack may be selected from the spur gear section of the catalog. Pitch (in) (in) (in) (ft) Item No. Mfr. No.
Special rack can be supplied in other materials, sizes and pitches. 2 100812211 R16X2
5/16 5/16 0.250 4 100812212 R16X4
6 100812213 R16X6
16
2 100812266 RA16X2
1/2 1/2 0.438 4 100812267 RA16X4
Pressure Angle: 14.5° 6 100812268 RA16X6
Material: Steel 20 3/8 3/8 0.325 6 100812241 R20X6
Face Overall Pitch Line 2 100812242 R24X2
Diametral Width Thickness to Back Length 24 1/4 1/4 0.208 4 100812243 R24X4
Pitch (in) (in) (in) (ft) Item No. Mfr. No. 6 100812244 R24X6
2 3/8 3/8 0.325 2 100812239 R20X2
2 100812245 R3X2 Pressure Angle: 20.0°
3 3 1 1/2 1.167 4 100812246 R3X4 Material: Steel
6 100812247 R3X6
3/8 3/8 0.325 4 100812240 R20X4 Face Overall Pitch Line
2 100812248 R4X2 Diametral Width Thickness to Back Length
1 1/2 1.250 4 100812249 R4X4 Pitch (in) (in) (in) (ft) Item No. Mfr. No.
4 6 100812250 R4X6 2 100812293 TR3X2
2 3 3 1 1/2 1.167 4 100812294 TR3X4
2 100812269 RA4X2
2 1.750 4 100812270 RA4X4 6 100812295 TR3X6
6 100812271 RA4X6 2 100812296 TR4X2
2 100812251 R5X2 2 1 1/2 1.250 4 100812297 TR4X4
1 1/4 1.050 4 100812252 R5X4 6 100812298 TR4X6
4
6 100812253 R5X6 2 100812227 R204X2
5 1 3/4 3 1/2 2 1.750 4 100812228 R204X4
2 100812272 RA5X2
1 1/2 1.300 4 100812273 RA5X4 6 100812229 R204X6
6 100812274 RA5X6 2 100812299 TR5X2
2 100812254 R6X2 1 3/4 1 1/4 1.050 4 100812300 TR5X4
1 0.833 4 100812255 R6X4 6 100812301 TR5X6
5
6 100812256 R6X6 2 100812230 R205X2
6 1 1/2 2 1/2 1 1/2 1.300 4 100812231 R205X4
2 100812275 RA6X2
1 1/2 1.333 4 100812276 RA6X4 6 100812232 R205X6
6 100812277 RA6X6 2 100812302 TR6X2
2 100812257 R8X2 1 1/2 1 1/2 1.333 4 100812303 TR6X4
3/4 0.625 4 100812258 R8X4 6 100812304 TR6X6
6
6 100812259 R8X6 2 100812233 R206X2
8 1 1/4 2 1 1/2 1.333 4 100812234 R206X4
2 100812278 RA8X2
1 1/4 1.125 4 100812279 RA8X4 6 100812235 R206X6
6 100812280 RA8X6 2 100812305 TR8X2
2 100812205 R10X2 1 1/4 1 1/4 1.125 4 100812306 TR8X4
5/8 0.525 4 100812206 R10X4 6 100812307 TR8X6
8
6 100812207 R10X6 2 100812236 R208X2
10 1 1 1/2 1 1/2 1.375 4 100812237 R208X4
2 100812260 RA10X2
1 0.900 4 100812261 RA10X4 6 100812238 R208X6
6 100812262 RA10X6 2 100812281 TR10X2
2 100812208 R12X2 1 1 0.900 4 100812282 TR10X4
1/2 0.417 4 100812209 R12X4 6 100812283 TR10X6
10
6 100812210 R12X6 2 100812214 R2010X2
12 3/4 1 1/4 1 1/4 1.150 4 100812215 R2010X4
2 100812263 RA12X2
3/4 0.667 4 100812264 RA12X4 6 100812216 R2010X6
6 100812265 RA12X6 Continued on next page.
480 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Features:
• Made in accordance with ANSI B29.1 standards
• Designed and built to provide maximum strength and wear life
• Thicker side plate for greater strength and fatigue resistance
• Solid, cold-forged bushings
• Solid rollers
• Wide waist link plates
• Anticollapse bushing design
• Available in multi-strand chains
• Available in heavy series
• Available in 50’ and 100’ reels
Pkg. Qty.: 10 ft
Min. Tensile
Pitch Strength
Chain No. (in) Construction (lbf) Item No. Mfr. No.
25 1/4 Riveted 780 102158846 25RIV
35 3/8 Riveted 1,760 102178659 35RIV
40 1/2 Riveted 3,125 102136472 40RIV
41 1/2 Riveted 1,500 102137770 41RIV
50 5/8 Riveted 4,880 102137771 50RIV
Cottered 7,030 102138076 60COTT
60 3/4
Riveted 7,030 102137617 60RIV
Cottered 12,500 102157896 80COTT
80 1
Riveted 12,500 102139495 80RIV
Cottered 19,530 102158644 100COTT
100 1 1/4
Riveted 19,530 102137772 100RIV
Cottered 28,125 102138080 120COTT
120 1 1/2
Riveted 28,125 102158226 120RIV
Cottered 38,280 102168907 140COTT
140 1 3/4
Riveted 38,280 102178661 140RIV
Cottered 50,000 102139052 160COTT
160 2
Riveted 50,000 102178662 160RIV
Cottered 63,280 102159299 180COTT
180 2 1/4
Riveted 63,280 102158833 180RIV
Cottered 78,125 102158236 200COTT
200 2 1/2
Riveted 78,125 102157809 200RIV
Cottered 112,500 102153763 240COTT
240 3
Riveted 112,500 102158648 240RIV
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 481
Power Transmission
Single Strand ANSI Roller Chain Link
Tensile Pkg.
Pitch Strength Qty.
Chain No. (in) Construction Duty (lbf) (ft) Item No. Mfr. No.
10 100800565 25RIV
25 1/4 Riveted Standard 1,050
100 101642924 25RIV100FT
10 100800568 35RIV
35 3/8 Riveted Standard 2,530 50 101419467 35RIV50FT
Features: 100 101645438 35RIV100FT
• PerforMax™ solid lube grooved bushings 10 100800573 40RIV
maximize wear life 40 1/2 Riveted Standard 4,290 50 101639479 40RIV50FT
• Long-lasting, heat-treated, solid rollers 100 101640639 40RIV100FT
• Pins are fabricated from high grade steel, 10 100800582 50RIV
then heat-treated 50 5/8 Riveted Standard 7,050 50 101635032 50RIV50FT
• Ring-coined connecting links have same 100 101635031 50RIV100FT
fatigue strength as base chain providing Cottered Standard 9,920 10 100800593 60COTT
improved capacity
10 100800588 60RIV
• Higher horsepower capacity
• Built to handle shock loads Standard 9,920 50 101627618 60RIV50FT
60 3/4
• Dynamic prestressing Riveted 100 101640644 60RIV100FT
• Complies with RoHS restrictions on the use 10 100800597 60H RIV
Heavy 9,920
of certain hazardous substances in electrical 100 101639493 60H RIV100FT
and electronic equipment 10 100800605 80 COTT
Standard 17,640
Cottered 50 101627617 80COTT50FT
Heavy 17,640 10 101635396 80H COTT
80 1 10 100800602 80RIV
Standard 17,640
50 101632615 80RIV50FT
Riveted
10 100800612 80H RIV
Heavy 17,640
50 101635395 80H RIV50FT
Standard 26,460 10 100800623 100COTT
Cottered
Heavy 26,460 10 101635970 100H COTT
10 100800617 100RIV
100 1 1/4 Standard 26,460
50 101627622 100RIV50FT
Riveted
10 100800618 100H RIV
Heavy 26,460
50 101635972 100H RIV50FT
Standard 37,480 10 100800630 120COTT
Cottered
Heavy 37,480 10 101645687 120H COTT
120 1 1/2
Standard 37,480 10 100800628 120RIV
Riveted
Heavy 37,480 10 100800632 120H RIV
Standard 48,510 10 100800638 140COTT
Cottered
Heavy 48,510 10 101645456 140H COTT
140 1 3/4
Standard 48,510 10 100800637 140RIV
Riveted
Heavy 48,510 10 100800639 140H RIV
Cottered Standard 60,630 10 100800643 160COTT
160 2 Standard 60,630 10 100800642 160RIV
Riveted
Heavy 60,630 10 100800646 160H RIV
482 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Continued from previous page.
Tensile Pkg.
Pitch Strength Qty.
Chain No. (in) Construction Duty (lbf) (ft) Item No. Mfr. No.
Cottered Standard 80,480 10 100800661 180COTT
180 2 1/4
Riveted Standard 80,480 10 100800660 180RIV
Standard 103,630 10 100800663 200COTT
Cottered
Heavy 103,630 10 101639492 200H COTT
200 2 1/2
Standard 103,630 10 100800662 200RIV
Riveted
Heavy 103,630 10 101639942 200H RIV
Cottered Standard 152,140 10 101639934 240COTT
240 3
Riveted Standard 152,140 10 101668355 240RIV
Connecting (Master)
Pitch Link Offset (Half) Link Roller Link
Chain No. (in) Duty Item No. Item No. Item No.
25 1/4 Standard 100800801 101639923 101642925
35 3/8 Standard 100800806 100800810 —
Connecting Offset 40 1/2 Standard 100800817 100800819 100800821
(Master) Link (Half) Link 50 5/8 Standard 100800830 100800834 100800836
Standard 102158700 100800846 101645440
60 3/4
Heavy 101645688 100800853 101642021
Standard 100800860 100800864 101639481
80 1
Heavy 100800871 100800875 —
Standard 100800877 100800882 100800888
100 1 1/4
Heavy 100800879 100800883 —
Standard 100800891 100800896 100800895
Roller Link 120 1 1/2
Heavy 100800901 100800904 —
Standard 100800905 100800910 —
140 1 3/4
Features: Heavy 100800908 100800912 —
• Ring-coined connection links have Standard 101676531 100800917 100800918
160 2
same fatigue strength as base chain, Heavy 100800919 — —
providing improved capacity 180 2 1/4 Standard 100800924 100800925 100800929
Standard 100800926 100800927 —
200 2 1/2
Heavy 101643697 — —
240 3 Standard 101634118 101642929 —
Conveyor Components:
Smoother Handling, Increased Movement
With so many moving parts, it’s no wonder that unplanned downtime may occur
from poor lubrication, improper fittings and countless other challenges.
Applied Industrial Technologies is your go-to source for a full line of conveyor
components to help you achieve the performance specifications for virtually every
aspect of the conveying chain. Our nationwide network of distribution centers,
conveyor shops and service centers carries a vast selection of conveyor
solutions from the industry’s most trusted brands.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 483
Power Transmission
Single Strand ANSI Roller Chain
Min.
Tensile Pkg.
Pitch Strength Qty.
Chain No. (in) Construction Duty (lbf) (ft) Item No. Mfr. No.
10 101698032 GS25RIV
25 1/4 Riveted Standard 780
100 101721632 GS25RIV100FT
Features: 10 101744009 GS35RIV
• Link plate shape and hole profile have 35 3/8 Riveted Standard 1,760 50 101666268 GS35RIV50FT
been computer modeled to optimize 100 101721631 GS35RIV100FT
stress distribution to improve fatigue 10 101696344 GS40RIV
life and wear 40 1/2 Riveted Standard 3,125 50 101696766 GS40RIV50FT
• High hardness, carburized alloy steel 100 101696345 GS40RIV100FT
pins and bushings 10 101744010 GS41RIV
• Factory prelubrication with a high 41 1/2 Riveted Standard 1,500 50 101727957 GS41RIV50FT
quality lubricant minimizes break-in 100 101699442 GS41RIV100FT
wear 10 101698033 GS50RIV
• Super straight bushings
50 5/8 Riveted Standard 4,880 50 101699274 GS50RIV50FT
• Appropriate press fits
• Shot peening 100 101697836 GS50RIV100FT
• Preloading Standard 7,030 10 101698551 GS60COTT
Cottered
• Zero initial stretch Heavy 7,030 10 101654010 GS60H COTT
10 101698425 GS60RIV
60 3/4
Standard 7,030 50 101658195 GS60RIV50FT
Riveted
100 101695065 GS60RIV100FT
Heavy 7,030 10 101665886 GS60H RIV
Cottered Standard 12,500 10 101695067 GS80COTT
10 101699276 GS80RIV
80 1 Standard 12,500 50 101698426 GS80RIV50FT
Riveted
100 101654013 GS80RIV100FT
Heavy 12,500 10 101654297 GS80H RIV
Cottered Standard 19,530 10 101699441 GS100COTT
100 1 1/4 10 101727401 GS100RIV
Riveted Standard 19,530
50 101654290 GS100RIV50FT
Cottered Standard 28,125 10 101696927 GS120COTT
120 1 1/2
Riveted Standard 28,125 10 101698030 GS120RIV
Cottered Standard 38,280 10 101727400 GS140COTT
140 1 3/4
Riveted Standard 38,280 10 101696928 GS140RIV
Cottered Standard 50,000 10 101727402 GS160COTT
160 2
Riveted Standard 50,000 10 101696343 GS160RIV
Cottered Standard 63,280 10 101697835 GS180COTT
180 2 1/4
Riveted Standard 63,280 10 101727956 GS180RIV
Cottered Standard 78,125 10 101695064 GS200COTT
200 2 1/2
Riveted Standard 78,125 10 101698031 GS200RIV
Cottered Standard 112,500 10 101727403 GS240COTT
240 3
Riveted Standard 112,500 10 101721630 GS240RIV
484 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features:
• Shotpeened, wide-waisted link plates are manufactured with maximized ball heights
from special alloy steels for added strength for chain sizes 60H and above
• The wide link plate profile improves stress distribution, leading to increased fatigue
resistance and enhanced performance
• Solid bushing and roller for mazimum wear life and smooth interaction with the
sprocket
No. of Strands Across: 1 • Preloaded up to 50% of minimum ultimate tensile strength (MUTS), which is
especially important for applications involving fixed center-to-center sprockets
Tensile Pkg. without take-ups; this minimizes or eliminates initial elongation
Pitch Strength Qty. • Available for chain sizes 80-180, a full hardened hook cotter provides greater link
Chain No. (in) Construction (lbf) (ft) Item No. Mfr. No. plate support and up to twice the shear strength of conventional short split cotters
10 101015645 40RIV • The easily installed hardened hook cotter should retain position in high vibration
40 1/2 Riveted 4,200 50 103308018 40RIV50FT applications
100 103576650 40RIV100FT • Industry leading production technology is employed to hot-dip each chain
41 1/2 Riveted 2,400 10 110485427 41RIVa • Working life of the chain is greatly extended compared to cold-dip methods
10 101015675 50RIV • Proprietary lubricants are designed to penetrate and fully coat the bearing surface
50 5/8 Riveted 6,600 50 103307836 50RIV50FT between the pin and bushing
100 103002015 50RIV100FT
10 101015701 60RIV
60 3/4 Riveted 8,500 50 103308446 60RIV50FT No. of Strands Across: 2
100 110485472 60RIV100FT
Cottered 14,500 10 101015746 80COTT Tensile Pkg.
10 101015744 80RIV Pitch Strength Qty.
80 1 Chain No. (in) Construction (lbf) (ft) Item No. Mfr. No.
Riveted 14,500 50 103309016 80RIV50FT
100 102883228 80RIV100FT 40 1/2 Riveted 8,400 10 110485470 40-2RIV
Cottered 24,000 10 101015795 100COTT 50 5/8 Riveted 13,200 10 105256570 50-2RIV
100 1 1/4
Riveted 24,000 10 101015794 100RIV 60 3/4 Riveted 17,000 10 105589988 60-2RIV
Cottered 34,000 10 110485394 120COTT Cottered 29,000 10 110485445 80-2COTT
120 1 1/2 80 1
Riveted 34,000 10 103372340 120RIV Riveted 29,000 10 110485474 80-2RIV
Cottered 46,000 10 110485401 140COTT Cottered 48,000 10 111024050 100-2COTT
140 1 3/4 100 1 1/4
Riveted 46,000 10 103149689 140RIV Riveted 48,000 10 105634987 100-2RIV
Cottered 58,000 10 110485407 160COTT Cottered 92,000 10 105223890 140-2COTT
160 2 140 1 3/4
Riveted 58,000 10 103308610 160RIV Riveted 92,000 10 110485397 140-2RIV
Cottered 95,000 10 111148067 180COTT 160 2 Cottered 116,000 10 111024087 160-2COTT
180 2 1/4
Riveted 95,000 10 110811590 180RIV 180 2 1/4 Riveted 190,000 10 111148068 180-2RIV
Cottered 100,000 10 105169194 200COTT Cottered 200,000 10 101015952 200-2 COTT
200 2 1/2 200 2 1/2
Riveted 100,000 10 110485409 200RIV Riveted 200,000 10 111148107 200-2RIV
240 3 Cottered 157,800 10 110485410 240COTT a
Higher side plates.
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 485
Power Transmission
Stainless Steel Roller Chain
Features:
• Made in accordance with ANSI B29.1 standards
• Manufactured using Class 300 series stainless steel
• Excellent corrosion protection
• Wide temperature range; low to high
• ANSI 25 to 120, 35-2 to 80-2
• British Standard Syno 06B to 16B, 06B-2 to 16B-2 Pkg. Qty.: 10 ft
available
Min.
• Available in multi-strands and double pitch Tensile
• Available in 50’ and 100’ reels Pitch Strength
• Applications where resistance to chemical reaction Chain No. (in) Construction Duty (lbf) Item No. Mfr. No.
is critical
40 1/2 Riveted Standard 2,403 102139559 40SS RIV
• Manufactured using FDA approved material and is
prelubricated with USDAH approved lubricant 50 5/8 Riveted Standard 3,779 102157071 50SS RIV
• Food and packaging industry 60 3/4 Riveted Standard 6,744 102156823 60SS RIV
• High temperature food processing applications 80 1 Riveted Standard 11,465 102139561 80SS RIV
Tensile
Chain No.
Pitch
(in) Construction
Strength
(lbf) Item No. Mfr. No.
Stainless Steel Roller Chain Link
RS40-1 1/2 Riveted 4,290 114725904 40SUPERSSRB
RS50-1 5/8 Riveted 7,050 114725866 50SUPERSSRB Features:
RS60-1 3/4 Riveted 9,920 114629203 60SUPERSSRB
• Withstands harsh chemicals and
extreme temperatures
RS80-1 1 Riveted 17,640 114629204 80SUPERSSRB
486 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Tensile
Features: Pitch Strength
• 600SS hardened round parts Chain No. (in) Construction Duty (lbf) Item No. Mfr. No.
• Provides corrosion resistance superior to either 35 3/8 Riveted Standard 5,060 100800666 35 2RIV
nickel-plated or coated series chains 40 1/2 Riveted Standard 8,580 100800668 40 2RIV
• Provides for operation in temperature ranges above 50 5/8 Riveted Standard 14,100 100800671 50 2RIV
and below where carbon steel base chains can operate Standard 19,840 100800677 60 2RIV
• Up to 50% higher working load compared to all 60 3/4 Riveted
Heavy 19,840 100800679 60 2H RIV
304SS chains Cottered Standard 35,280 100800696 80 2COTT
• Better expected wear life compared to all 80 1 Standard 35,280 101632793 80 2RIV
304SS chains Riveted
Heavy 35,280 101634718 80 2H RIV
Standard 52,920 100800685 100 2COTT
Construction: Riveted Cottered
Pkg. Qty.: 10 ft 100 1 1/4 Heavy 52,920 101634715 100 2H COTT
Riveted Standard 52,920 100800684 100 2RIV
Tensile Cottered Standard 74,960 101657121 120 2COTT
Pitch Strength 120 1 1/2 Standard 74,960 100800674 120 2RIV
Chain No. (in) (lbf) Item No. Mfr. No. Riveted
Heavy 74,960 101668362 120 2H RIV
40 1/2 155 111148267 40ASRIV Cottered Standard 97,020 101676533 140 2COTT
140 1 3/4
50 5/8 230 111148436 50ASRIV Riveted Standard 97,020 100800686 140 2RIV
60 3/4 350 111148431 60ASRIV Cottered Standard 121,260 100800691 160 2COTT
160 2
80 1 600 111148426 80ASRIV Riveted Standard 121,260 101627628 160 2RIV
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 487
Power Transmission
Double Strand ANSI Roller Chain Link Double Strand ANSI Roller Chain Link
Features:
• Ring-coined connection links have
same fatigue strength as base chain,
providing improved capacity
Connecting
Connecting Offset (Half) Link (Master) Link
(Master) Link
Pitch Connecting (Master) Link Offset (Half) Link
Chain No. (in) Duty Item No. Link Type Item No. Link Type
Pitch Connecting (Master) Link Offset (Half) Link 35 3/8 Standard 101685995 Spring Clip — —
Chain No. (in) Duty Item No. Item No. 40 1/2 Standard 101727399 Spring Clip 101727954 Cotter Pin
35 3/8 Standard 100800931 — 50 5/8 Standard 101696764 Spring Clip 101698422 Standard
40 1/2 Standard 100800934 100800936 101695630 Cotter Pin 101721629 Cotter Pin
60 3/4 Standard
50 5/8 Standard 100800939 100800940 101665213 Spring Clip — —
Standard 100800942 100800943 101698423 Cotter Pin 101696765 Cotter Pin
60 3/4 80 1 Standard
Heavy 101645457 — 101635201 Spring Clip — —
Standard 100800945 100800946 100 1 1/4 Standard 101666586 Cotter Pin 101654726 Standard
80 1 120 1 1/2 Standard 101665207 Cotter Pin 101654729 Standard
Heavy 101645689 101636066
Standard 100800950 100800951 140 1 3/4 Standard 101665208 Cotter Pin — —
100 1 1/4 160 2 Standard 101666588 Cotter Pin — —
Heavy 101643696 101639392
Standard 100800952 100800953
120 1 1/2
Heavy 101668363 —
Pitch
Chain No. (in) Duty Item No. Mfr. No.
Features:
• Designed and built to provide maximum strength and wear life 2040 1 Standard 102137782 C2040RIV
• Solid, cold forged bushings 2050 1 1/4 Standard 102137783 C2050RIV
• Wide waist link plates 2060 1 1/2 Heavy 102158649 C2060H RIV
• Appropriate press fits 2080 2 Heavy 102159303 C2080H RIV
Min.
Tensile Pkg.
Chain
No.
Pitch
(in) Construction Duty
Strength
(lbf)
Qty.
(ft) Item No. Mfr. No.
Conveyor Series Double Pitch Link
25 1/4 Riveted Standard 1,750 10 101665209 GS25 2RIV Features:
35 3/8 Riveted Standard 3,520 10 101666026 GS35 2RIV • Made in accordance with ANSI B29.1 standards
40 1/2 Riveted Standard 6,250 10 101696929 GS40 2RIV • Designed and built to provide maximum strength
10 101698550 GS50 2RIV and wear life
• Solid, cold forged bushings
GS50 • Solid rollers
50 101744011
50 5/8 Riveted Standard 9,760 2RIV50FT
Connecting Link • Wide waist link plates
GS50 • Anticollapse bushing design
100 101727404
2RIV100FT
Cottered Standard 14,060 10 101699275 GS60 2COTT
10 101729111 GS60 2RIV
60 3/4
Riveted Standard 14,060 GS60
50 101695066
2RIV50FT
Cottered Standard 25,000 10 101666272 GS80 2COTT Offset Link
80 1
Riveted Standard 25,000 10 101698315 GS80 2RIV
100 1 1/4 Riveted Standard 39,060 10 101666222 GS100 2RIV Connecting Offset (Half)
120 1 1/2 Riveted Standard 56,200 10 101654730 GS120 2RIV Pitch (Master) Link Link Roller Link
140 1 3/4 Riveted Standard 76,560 10 101692513 GS140 2RIV Chain No. (in) Duty Item No. Item No. Item No.
Cottered Standard 100,000 10 101659619 GS160 2COTT 2040 1 Standard 102159302 102157822 —
160 2
Riveted Standard 100,000 10 101666265 GS160 2RIV 2050 1 1/4 Standard 102157811 102157823 —
Cottered Standard 156,250 10 101655473 GS200 2COTT 2060 1 1/2 Heavy 102139055 102159338 102157913
200 2 1/2
Riveted Standard 156,250 10 101666025 GS200 2RIV 2080 2 Heavy 102139507 102157914 102168929
488 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Duty: Heavy
Construction: Riveted
Min.
Tensile Pkg.
Pitch Strength Qty.
Chain No. (in) (lbf) Pins & Rollers (ft) Item No. Mfr. No.
10 101666432 GSC2060H RIV
2060 1 1/2 7,030 Standard
50 101666232 GSC2060H RIV50FT
2080 2 12,500 Standard 10 101665216 GSC2080H RIV
Construction: Riveted
Pkg. Qty.: 10 ft
Connecting (Master) Link Offset (Half) Link
Tensile
Pitch Strength Chain Pitch Connecting (Master) Link Offset (Half) Link
Chain No. (in) (lbf) Item No. Mfr. No. No. (in) Item No. Mfr. No. Item No. Mfr. No.
C2040 1 4,200 111148486 C2040RIV 2040 1 111148478 C2040CONN LK SC 111148465 C2040OFFSET LK
C2050 1 1/4 6,600 111148233 C2050RIV 2050 1 1/4 111148230 C2050CONN LK SC 111148036 C2050OFFSET LK
C2060H 1 1/2 8,500 111147942 C2060HRIV 2060 1 1/2 101016029 C2060H COTT CONN 101016030 C2060H OFF
C2080H 2 14,500 111147981 C2080HRIV 2080 2 111147971 C2080HCONN LK CP 111148003 C2080HOFFSET LK
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 489
Power Transmission
Single Strand Lambda Titan™ Series Roller Chain Link
Drive Roller Chain
Features:
• Lube-free drive chain
• Maintenance-free design
• Utilizes specially coated pins and oil-impregnated bushings
• Perfect for applications where lubrication is difficult or impossible
• Outstanding performance in temperatures up to 302 °F Connecting
• Complies with RoHS restrictions on the use of certain hazardous substances in Chain Pitch (Master Link) Offset
electrical and electronic equipment No. (in) Duty Item No. Mfr. No. Item No. Mfr. No.
Applications: 40 3/8 Standard - High Speed 112373745 40TTCL 112373746 40TTOL
• Packaging 50 1/2 Standard - High Speed 112373750 50TTCL 112373752 50TTOL
• Food processing 60 5/8 Standard - High Speed 112373748 60TTCL 112373743 60TTOL
• Pulp and paper mills 80 3/4 Standard - High Speed 112373747 80TTCL 112373744 80TTOL
• Lumber and sawmills 100 1 Standard - High Speed 112373749 100TTCL 112373751 100TTOL
• Automotive Pkg. Qty.: 10 ft 120 1 1/4 Standard - High Speed 112073225 120TTCL 112073226 120TTOL
Tensile
Chain Pitch Strength
No. (in) Construction Duty (lbf) Item No. Mfr. No.
40 1/2 Riveted Standard 4,300 101643946 40D LAMB RIV
50 5/8 Riveted Standard 7,050 101645214 50D LAMB RIV
60 3/4 Riveted Standard 9,920 101639802 60D LAMB RIV Engineered Drive Chain
80 1 Riveted Standard 17,600 101782839 80D LAMB RIV
100 1 1/4 Riveted Standard 26,500 100800633 100D LAMB RIV
Features: Features:
• Ring-coined connection links • Sold in approximately 10 ft sections
have same fatigue strength • Solid steel, heat-treated pins increase wear life
as base chain, providing • Rollers are made from solid sold-roller steel and have accurately machined bores
improved capacity • Sidebars are accurately pitched with holes that are punched and shaved to ensure
maximum fatigue resistance
Connecting Link Offset Link • Offset and straight sidebars available
Chain
No.
Pitch
(in) Duty Item No. Mfr. No. Connect with Us!
40 3/8 Standard - High Speed 112073229 40TTRB
50 1/2 Standard - High Speed 112036309 50TTRB
60 3/4 Standard - High Speed 112014709 60TTRB
80 3/4 Standard - High Speed 112014710 80TTRB
100 1 Standard - High Speed 112014711 100TTRB
120 1 1/4 Standard - High Speed 112014712 120TTRB
490 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features: Features:
• Self-lubricated chain with food industry approved lubricant • Self-lubricated chain with food industry approved lubricant
• Revolutionary polymer bushing removes the need for chain to be and roller coating
lubricated • Dry-to-the-touch chain exterior that is completely lube-free
• Dry-to-the-touch • Improved electroless nickel plating on plates resists chipping
• Excellent corrosion resistance and peeling
• Ideal for hygiene sensitive applications • Revolutionary polymer bushing removes the need for chain to
Connecting Link be lubricated
• ANSI 40 to 200, 40-2 to 200-2, C2040 to C2080
• British Standard Syno 08B to 40B, 08B-2 • Heavy-duty polymer rollers are able to contend with high
to 40B-2 available loads
Pkg. Qty.: 10 ft • Specially coated plates offer superior corrosion resistance for
washdown and outdoor environments
Pitch
Chain No. (in) Construction Item No. Mfr. No.
40 1/2 Riveted 101960578 40SYNORB
50 5/8 Riveted 101952003 50SYNORB Offset Link
60 3/4 Riveted 101949065 60SYNORB
Pitch Connecting (Master) Link Offset (Half) Link
80 1 Riveted 101973737 80SYNORB
100 1 1/4 Riveted 101956681 100SYNORB Chain No. (in) Item No. Item No.
2040 1 Riveted 101956682 C2040SYNORB 40 1/2 101951228 101946275
2050 1 1/4 Riveted 101953372 C2050SYNORB 50 5/8 101949450 101946276
2060 1 1/2 Riveted 101953460 C2060SYNORB 60 3/4 101946277 101948414
2080 2 Riveted 101960579 C2080SYNORB 80 1 101960571 101970524
100 1 1/4 101980321 —
2040 1 101970525 101949451
2050 1 1/4 101960572 101985480
2060 1 1/2 101953455 101948417
Synergy™ Chain 2080 2 101960575 101960576
Features:
• Superior wear and fatigue resistance
• Up to 6x longer working life than any other Hydro-Service® Chain Link
standard chain
• Virtually dry-to-the-touch for easier handling and
installation
• Distinctive platinum-colored connecting link for
easy identification
• British Standard Chain also available
• ANSI 35 to 160, 35-2 to 160-2, 35-3 to 160-3
Connecting Link Offset Link No. of Strands Across: 1 No. of Strands Across: 2
Pitch Connecting (Master) Link Offset (Half) Link Pitch Connecting (Master) Link Offset (Half) Link
Chain No. (in) Item No. Mfr. No. Item No. Mfr. No. Chain No. (in) Item No. Mfr. No. Item No. Mfr. No.
35 3/8 101932661 35SYNCL 101942260 35SYNOL 50 5/8 101943335 50-2SYNCL — —
40 1/2 101953148 40SYNCLSC 101945092 40SYNOL 80 1 101953149 80-2SYNCL 101932663 80-2SYNOL
50 5/8 101941670 50SYNCL 101942753 50SYNOL
60 3/4 101942261 60SYNCL 101946416 60SYNOL
80 1 101945093 80SYNCL 101945022 80SYNOL
100 1 1/4 101972233 100SYNCL 101946413 100SYNOL
120 1 1/2 101962807 120SYNCL 101953146 120SYNOL
140 1 3/4 101966789 140SYNCL 101956684 140SYNOL
160 2 101956685 160SYNCL 101973744 160SYNOL
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 491
Power Transmission
Hydro-Service® Roller Chain
Features: Applications:
• Superior corrosion resistance • Saltwater environments
• Hexavalent chrome-free – ensuring it is safe and environmentally friendly • Meat and poultry processing plants
• 30 times more corrosion resistant than conventional surface treatments • Vegetable processing plants
• Will not chip or peel • Seafood processing plants
• Same strength and working load values as standard carbon chain • Beverage and bottling plants
• ANSI 35 to 160, 35-2 to 160-2 • Washdown equipment
• British standard, double • Outdoor applications
pitch and multi-strand No. of Strands Across: 1 No. of Strands Across: 2
chain available Pkg. Qty.: 10 ft Pkg. Qty.: 10 ft
Pitch Pitch
Chain No. (in) Construction Item No. Mfr. No. Chain No. (in) Construction Item No. Mfr. No.
35 3/8 Riveted 102148128 35HSC RIV 40 1/2 Riveted 102208610 40 2HSC RIV
40 1/2 Riveted 102153785 40HSC RIV 50 5/8 Riveted 101997116 50 2HSC RIV
50 5/8 Riveted 102178698 50HSC RIV 60 3/4 Riveted 101499617 60 2HSC RIV
60 3/4 Riveted 102168930 60HSC RIV 100 1 1/4 Riveted 101941594 100 2HSC RIV
80 1 Riveted 102157076 80HSC RIV 2040 1 Riveted 113150616 C2040HS
100 1 1/4 Riveted 102139573 100HSC RIV 2050 1 1/4 Riveted 112512026 C2050HSX10FT
2040 1 Riveted 102137801 C2040HSC RIV 2060 1 1/2 Riveted 106494894 C2060HHSX10FT
2050 1 1/4 Riveted 102159323 C2050HSC RIV 2080 2 Riveted 113517721 C2080HHSX10FT
2060 1 1/2 Riveted 102153930 C2060HSC RIV
2080 2 Riveted 102156826 C2080HSC RIV
492 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
E-Series Metric
(British Standard)
Roller Chain
Series 815 TableTop® Chain
LINK PLATE
THICKNESS
1/8”
MODULE
WIDTH GUIDE CLEARANCE
1 3/4”
Features:
• Manufactured according to British Standard ISO
R606B/DIN 8187 CHAIN THICKNESS
• These British Standard chains are also available in Applications: PITCH 0.501”
stainless and nickel plated finishes on request • Beverage 1 1/2” PIN DIA.
Pkg. Qty.: 5 Meters • Brewing 1/4”
• Chains manufactured to ISO 9002 (Germany)
reg. no. 041003017 • Dairy
No. of Strands Across: 1 • Package handling
• Parts processing
Breaking
Chain Pitch Load
• Food processing
No. (mm) Construction Duty (kN) Item No. Mfr. No. • Glass, plastic or metal container handling
03B-1 5.00 Riveted Standard 2.4 111997314 E03B-1RIV
04B-1 6.00 Riveted Standard 3.2 110070884 E04B-1RIV Straight Running, One Piece Pkg. Qty.: 10 ft
05B-1 8.00 Riveted Standard 5.9 104971428 E05B-1RIV
Carbon Steel Stainless Steel
06B-1 9.53 Riveted Standard 10.4 112195740 E06B-1RIV Module
081B-1 12.70 Riveted Standard 10.0 104549606 E081B-1RIV Width -40 °F to 800 °F -40 °F to 800 °F
083B-1 12.70 Riveted Standard 12.7 101796514 E083B-1RIV (in) Item No. Mfr. No. Item No. Mfr. No.
085B-1 12.70 Riveted Standard 12.3 104973177 E085B-1RIV 3 1/4 101498606 S815K3 1/4 101490576 SS815K3 1/4
08B-1 12.70 Riveted Standard 19.4 112195823 E08B-1RIV 4 101489214 S815K4 101490834 SS815K4
10B-1 15.88 Riveted Standard 27.5 112195826 E10B-1RIV 4 1/2 101496579 S815K4 1/2 101501011 SS815K4 1/2
12B-1 19.05 Riveted Standard 32.2 101795345 E12B-1RIV 6 101501294 S815K6 101490833 SS815K6
12BH-1 19.05 Riveted Standard 40.0 111997315 E12BH-1RIVa 7 1/2 101501008 S815K7 1/2 101501010 SS815K7 1/2
16B-1 25.40 Riveted Standard 72.8 112195830 E16B-1RIV
20B-1 31.75 Riveted Standard 106.7 111997316 E20B-1RIV
24B-1 38.10 Riveted Standard 178.0 111997317 E24B-1RIV
28B-1 44.50 Riveted Standard 222.0 104970069 E28B-1RIV
32B-1 50.80 Riveted Standard 277.5 112195832 E32B-1RIV Convenient, Local Rubber
40B-1 63.50 Riveted Standard 394.0 106164038 E40B-1RIV
48B-1 76.20 Riveted Standard 621.6 101794422 E48B-1RIV Shop Capabilities
56B-1 88.90 Riveted Standard 940.0 104968277 E56B-1RIV
a
Heavy-duty version.
The Applied Industrial Technologies
No. of Strands Across: 2
Rubber Shops operate across the country
Chain Pitch
Breaking
Load
and can be utilized for single-source
No. (mm) Construction Duty (kN) Item No. Mfr. No. purchasing of your custom fabricated
04B-2 6.00 Riveted Standard 5.8 111997318 E04B-2RIV
05B-2 8.00 Riveted Standard 10.2 104973559 E05B-2RIV
belting needs. Technical support for belting
06B-2 9.53 Riveted Standard 18.7 105010653 E06B-2RIV selection and / or troubleshooting can be
08B-2 12.70 Riveted Standard 38.7 101764147 E08B-2RIV
10B-2 15.88 Riveted Standard 56.2 112195915 E10B-2RIV done through our strategically located
12B-2 19.05 Riveted Standard 66.1 101765297 E12B-2RIV Rubber Product Specialists. The Applied®
16B-2 25.40 Riveted Standard 133.0 104975260 E16B-2RIV
20B-2 31.75 Riveted Standard 211.2 104975262 E20B-2RIV rubber shops adhere to all NIBA standards
24B-2 38.10 Riveted Standard 319.2 104970068 E24B-2RIV and tolerances.
28B-2 44.50 Riveted Standard 406.8 104978645 E28B-2RIV
32B-2 50.80 Riveted Standard 508.5 112195917 E32B-2RIV
40B-2 63.50 Riveted Standard 711.9 111997319 E40B-2RIV Features and Benefits:
48B-2 76.20 Riveted Standard 1,130.0 111997320 E48B-2RIV
56B-2 88.90 Riveted Standard 1,760.0 111997321 E56B-2RIV • Shops strategically located for
No. of Strands Across: 3
fast delivery
• Large inventory selection
Breaking
Chain Pitch Load • Offer industry leading brands
No. (mm) Construction Duty (kN) Item No. Mfr. No.
06B-3 9.53 Riveted Standard 30.1 104968271 E06B-3RIV
• Technical support provided by
08B-3 12.70 Riveted Standard 57.8 105926580 E08B-3RIV Applied® Rubber Product Specialists
10B-3 15.88 Riveted Standard 84.5 106023936 E10B-3RIV
12B-3 19.05 Riveted Standard 101.8 104968755 E12B-3RIV
16B-3 25.40 Riveted Standard 203.7 101795938 E16B-3RIV Contact your local Applied®
20B-3 31.75 Riveted Standard 290.0 101794730 E20B-3RIV
24B-3 38.10 Riveted Standard 493.0 104286522 E24B-3RIV
service center at 1-866-351-3464
28B-3 44.50 Riveted Standard 609.5 104970288 E28B-3RIV for more information.
32B-3 50.80 Riveted Standard 770.5 111997322 E32B-3RIV
40B-3 63.50 Riveted Standard 1,092.5 111997323 E40B-3RIV
48B-3 76.20 Riveted Standard 1,710.0 111997324 E48B-3RIV
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 493
Power Transmission
MODULE
WIDTH GUIDE CLEARANCE Applications:
1 3/4” • Beverage
• Brewing
• Dairy
CHAIN
• Package handling
THICKNESS
PITCH PIN DIA.
• Parts processing
1 1/2” 1/4” • Food processing
• Glass, plastic or metal container handling
LF Acetal HP Acetal
™
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
3 1/4 101491435 LF820K3 1/4 101530452 HP820K3 1/4
4 101501004 LF820K4 — —
4 1/2 101500436 LF820K4 1/2 — —
6 101363248 LF820K6 — —
7 1/2 101489385 LF820K7 1/2 101497618 HP820K7 1/2
MODULE
WIDTH
GUIDE CLEARANCE
5 1/2”
Applications:
• Beverage
• Brewing
LINK PLATE THICKNESS • Dairy
3/16” • Package handling
• Parts processing
CHAIN PIN DIA.
PITCH
• Food processing
1/4”
1 1/2” • Glass, plastic or metal container handling
MODULE
GUIDE CLEARANCE Applications:
WIDTH
1 3/4” • Beverage
• Brewing
• Dairy
• Package handling
THICKNESS
CHAIN
17/32” • Parts processing
PITCH PIN DIA. • Food processing
1 1/2” 1/4”
• Glass, plastic or metal container handling
494 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Series 879 TableTop® Chain
LINK PLATE LINK PLATE
THICKNESS THICKNESS Applications:
0.188” 0.188”
• Beverage
MODULE MODULE
• Brewing
WIDTH GUIDE CLEARANCE
1 3/4”
WIDTH GUIDE CLEARANCE • Dairy
1.81”
• Package handling
• Parts processing
THICKNESS
25/32” CHAIN THICKNESS • Food processing
CHAIN
PITCH PIN DIA. PITCH
1 1/2” PIN DIA.
25/32”
• Glass, plastic or metal container handling
1 1/2” 9/32” 9/32”
Sideflexing, One Piece, Bevel Type Sideflexing, One Piece, Tab Type
Sideflexing, One Piece, Bevel Type Pkg. Qty.: 10 ft
LF Acetal
Module
Width -40 °F to 180 °F
(in) Item No. Mfr. No.
3 1/4 101501312 LF879K3 1/4
4 1/2 101530451 LF879K4 1/2
Sideflexing, One Piece, Tab Type
LF Acetal HP™ Acetal
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
3 1/4 101819031 LF879TK3 1/4 101490662 HP879TK3 1/4
4 1/2 101490593 LF879TK4 1/2 101498620 HP879TK4 1/2
Sideflexing, One Piece, Bevel Type Sideflexing, One Piece, Tab Type Pkg. Qty.: 10 ft
Sideflexing, One Piece, Bevel Type
LF Acetal HP™ Acetal
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
3 1/4 102679330 LF880K3-1/4 101500905 HP880K3 1/4
4 1/2 101501006 LF880K4 1/2 — —
Sideflexing, One Piece, Tab Type
LF Acetal HP™ Acetal
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
3 1/4 101715897 LF880TK3-1/4 101772998 HP880TK3 1/4
4 1/2 101537774 LF880TK4-1/2 101715359 HP880TK4 1/2
Sideflexing, One Piece, Bevel Type Sideflexing, One Piece, Tab Type
Sideflexing, One Piece, Bevel Type Pkg. Qty.: 10 ft Sideflexing, One Piece, Tab Type
Carbon Steel Stainless Steel Carbon Steel Stainless Steel
Module Module
Width -40 °F to 350 °F -40 °F to 800 °F Width -40 °F to 350 °F -40 °F to 800 °F
(in) Item No. Mfr. No. Item No. Mfr. No. (in) Item No. Mfr. No. Item No. Mfr. No.
3 1/4 — — 101500699 SS881K3 1/4 3 1/4 — — 101782347 SS881TK3 1/4
4 1/2 — — 101491256 SS881K4 1/2 4 1/2 — — 101499681 SS881TK4 1/2
7 1/2 101491548 S881K7 1/2 101500505 SS881K7 1/2 7 1/2 101501313 S881TK7 1/2 101759219 SS881TK7 1/2
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 495
Power Transmission
Series 882 TableTop® Chain
LINK PLATE LINK PLATE
THICKNESS THICKNESS Applications:
3/16” 3/16” • Beverage
• Brewing
MODULE
MODULE
WIDTH
• Dairy
GUIDE CLEARANCE
WIDTH GUIDE CLEARANCE
2.44” 2.38”
• Package handling
• Parts processing
• Food processing
THICKNESS
• Glass, plastic or metal
THICKNESS CHAIN
CHAIN
PITCH PIN DIA.
container handling
PITCH PIN DIA.
1 1/2” 1 1/2” 11/32”
11/32”
Sideflexing, One Piece, Bevel Type Sideflexing, One Piece, Tab Type
Sideflexing, One Piece, Bevel Type Pkg. Qty.: 10 ft
LF Acetal HP Acetal
™
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
4 1/2 101500441 LF882K4 1/2 — —
7 1/2 101496577 LF882K7 1/2 101499155 HP882K7 1/2
10 101500439 LF882K10 — —
Sideflexing, One Piece, Tab Type
LF Acetal HP™ Acetal
Module
Width -40 °F to 180 °F -40 °F to 180 °F
(in) Item No. Mfr. No. Item No. Mfr. No.
4 1/2 101498604 LF882TK4 1/2 101535116 HP882TK4.5
7 1/2 101491110 LF882TAB K7 1/2 101497620 HP882TAB K7 1/2
10 101581807 LF882TK10 101501317 HP882TK10
12 101548719 LF882TK12 101490660 HP882TK12
Features:
• Multi-directional flexibility
• Horizontal or incline/decline
• Small sideflexing radius
• High working load
• Quality construction
• Long wear life
• Low coefficient of friction
• Use for conveying milk cartons in the dairy industry, or
for elevating or lowering products with the possibility of
accumulation
• Also use in the preserving and mechanical industries Bevel Type Tab Type
Features:
Pkg. Qty.: 10 ft • Conveying lines for PET bottles and aluminum or steel cans
• Packaging lines for PET bottle packs in heat shrink film
Module Low Friction Acetal • Pharmaceutical industry applications, including all general
Width purpose conveying
(in) Item No. Mfr. No. Pkg. Qty.: 10 ft
Bevel Type
2.17 102057734 LF-1700
Module Min. Sideflex Low Friction Acetal
Width Radius Thickness
(in) Series (in) (in) Item No. Mfr. No.
879 18 0.19 102059017 LF879-K325
3 1/4
880 18 0.16 102056983 LF880-K325
879 18 0.19 102061658 LF879-K450
Flat Guide Rail 4 1/2 880 18 0.16 102058761 LF880-K450
882 24 0.19 103729372 LF882K450
7 1/2 882 24 0.19 103756874 LF882K750
Side rail or wear strip when a wider 10 882 24 0.19 103718999 LF882K1000
surface contact is required. Can also be
used as a chain guide for #60 roller chain. Tab Type
Module Min. Sideflex Low Friction Acetal
Width Radius Thickness
(in) Series (in) (in) Item No. Mfr. No.
879 18 0.19 102050050 LF879TAB-K325
3 1/4
880 18 0.16 102105013 LF880TAB-K325
Insert Material: PTFE (up to 525 °F)
Sheath Material: Stainless Steel 879 18 0.19 102068415 LF879TAB K450
4 1/2 880 18 0.16 102060247 LF880TAB-K450
Bottom Top 882 24 0.19 102059016 LF882TAB-K450
Length Height Width Width 7 1/2 882 24 0.19 102068635 LF882TAB-K750
Item No. Mfr. No. (ft) (in) (in) (in) 10 882 24 0.19 102057732 LF882TAB-K1000
101815581 VGSSFHT10 10 0.67 0.67 0.46 12 882 24 0.19 102059893 LF882TAB-K1200
496 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
Features:
• Low noise level, low coefficient of friction and low horsepower requirements are
the advantages of the chain
• Provides an excellent flat surface and medium working load in a dry running
environment
• The added thickness of the 831 series top plate adds 20% more wear life and
simplifies conveyor chain when matching with chain series 821, 879, 882 and 878
• Provides a high working load in a dry running environment
• Conveying lines for PET bottles and aluminum or steel cans Stainless Steel 304 Stainless Steel
• Packaging lines for PET bottle packs in heat shrink film, paper board boxes, or Heavy-Duty Heavy-Duty Self Tightening
cans in heat shrink film, can also be fitted with chains
• Pharmaceutical industry applications, including all general purpose conveying
Features:
• For light-duty applications
Pkg. Qty.: 10 ft • Connects guide rail to brackets or adjusting rods
Single Hinge • When the clip is installed loose, the rail can be snapped into the clip
Module Min. Backflex Low Friction Acetal • As the bolt is tightened, clamping force on the rail increases
Type: Compression
Width Dia. Thickness Pkg. Qty.: 20
(in) Series (in) (in) Item No. Mfr. No.
820 2 0.19 102057686 LF820-K325 Thread Length
3 1/4
831 2 0.16 102057187 LF831-K325 Item No. Mfr. No. Material Size (in)
4 820 2 0.16 102050197 LF820-K400 101839215 VG-016-02 Plastic 5/16 in 0.81
820 2 0.16 102166394 LF820K450 101924623 VG01603 Anodized Aluminum N/A 0.81
4 1/2
831 2 0.19 102060184 11608
6 820 2 0.16 102111269 LF820K600
820 2 0.18 102060246 LF820-K750 Features:
7 1/2
831 2 0.19 102057032 LF831-K750 • Medium-duty clip for supporting guide rails
• Jaws of clip open for easy attachment then clamp onto rail when tightened
• This is an upgrade from the standard VG-014 clips
• Nut not supplied Type: Self Tightening
Double Hinge • Recommended torque 10 ft lb Pkg. Qty.: 20
Module Min. Backflex Low Friction Acetal Thread
Width Dia. Thickness Size Bolt Length Length
(in) Series (in) (in) Item No. Mfr. No. Item No. Mfr. No. Material (in) (in) (in)
7 1/2 821 2 0.19 102057731 LF821-K750 101821294 VG-014H-01 Stainless Steel 1/4 0.600 0.8
10 821 2 0.19 102072590 LF821-K1000 102038892 VG-014H-02 Stainless Steel 1/4 0.850 0.8
12 821 2 0.19 102060182 LF821-K1200
Features:
• Heavy-duty support for guide rail
• Two piece compression style for easy assembly and adjustment Type: Heavy-Duty
• Works with brackets, support beams and adjusting rods Pkg. Qty.: 20
Round Rail Thread Length
Item No. Mfr. No. Material Size Bolt Length (in)
102203658 VG-018-01 Stainless Steel 5/16 in 0.675 in 1
Features: 101667321 VG01803 Stainless Steel 5/16 in 1.000 in 1
• General purpose side rail for minimum 101651598 VG01804 Stainless Steel 5/16 in 1.250 in 1
container contact 101678091 VG018M03 Stainless Steel M8 25.500 mm 1
101676774 VG018M04 Stainless Steel M8 30.000 mm 1
Features:
• Heavy-duty support for guide rail
• Automatically clamps onto Valu-Guide rail Type: Heavy-Duty Self Tightening
Insert Material: Natural UHMW when the bolt is tightened Pkg. Qty.: 20
Sheath Material: Stainless Steel
Thread
Bottom Top Size Bolt Length Length
Length Height Width Width Item No. Mfr. No. Material (in) (in) (in)
Item No. Mfr. No. (ft) (in) (in) (in) 101663101 VG01501 304 Stainless Steel 5/16 0.640 1
101430694 VG-SSR-10 10 0.67 0.67 0.67 102219750 VG01502 304 Stainless Steel 5/16 0.760 1
102156868 VGSSR20 20 0.67 0.67 0.67 101662463 VG01503 304 Stainless Steel 5/16 1.010 1
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 497
Power Transmission
Use With:
• VG-A225 rail
• VG-A275 rail
• VG-A600 rail
• VG-A900 rail
Material: Stainless Steel
Pkg. Qty.: 10 Material: UHMW
Length Height Length Width
Item No. Mfr. No. (in) Item No. Mfr. No. (in) (ft) (in)
101795022 VG156802 0.76 101693871 VGP816F10 1 10 1/4
498 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
No. 35 - 3/8” Pitch - Single - Plain
Rail Splice Clamp Stock Bore Sprocket
Features:
• Connects ends of two guide rails
• Heavy-duty, rigid support resists
bending, installs easily over rail
• Hardware included
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 499
Power Transmission
Features:
• Conforms to ANSI B29.1-1975 standards
500 For current pricing, visit Applied.com or call your local Applied® service center at 1-866-351-3464
Power Transmission
No. 35 - 3/8” Pitch - Single - Saber Tooth Hardened - Bored to Size Sprocket
Features:
• Conforms to ANSI B29.1-1975 standards
PRODUCTS ARE FOR INDUSTRIAL OR COMMERCIAL USE ONLY. All Things Industrial® 501
Power Transmission