Professional Documents
Culture Documents
com/rmcgaming
3D Printer Annual Maintenance Schedule
Maintenance Year _________
Every Month January February March April May June July August September October November December
Every Quarter 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Annually
Remove and clean extruder Loosen and re-tighten bolts to
gear. _________ _________ _________ _________ ensure frame is square. _________
Remove and check PTFE tube for Open panels and check all
wear. _________ _________ _________ _________ connections on boards. _________
Remove and clean Z-screw and Replace v-slot wheels and
re-grease.1 _________ _________ _________ _________ bearings. _________
Remove hotend and clean
Replace belts as needed.
dust/debris from fans/hotend _________ _________ _________ _________ _________