January 2016 Section 3 + Scheduled Maintenance Procedures Maintenance Inspection Report Machine owner A-SEngine maintenance - Deutz models Inspec "y (prir AB Hydraulic filter Cummins models. ap SEoY ges Perform after 40 hours: 8-9 Lug nut torque Wapectors————————— 7_s0daySevics TTT) 840 Dive hub olleval a Perform every 50 hours: 8-11 Drive brakes pects pany Parkins models. 8-13 Koy switches, Instructions ‘ Deutz models 315 Platform seltleveling * Make copies of this report 0 use for Perform every 100 hours: 8-16 Limit swatches ‘each inspection. ‘10 Grease rotation bearing] 8-17 Fuel and hydraulic tank, + Place a check inthe appropriate ox ator each inspection procedure is completed + Use the stop-by-step procedures in this secton fo lear how ta perform those inspections + if any ingpection roceves an", tag and remove the machine from sorven, repair and ro-inspect i ‘Nor ropa, place a chock in tho “A box. ty es, acceptable N-=no, remove trom service R= ropaired a$$ Part No. 102916 $-100 » $-105 + S-120 + S-125 3-5Section 8 + Scheduled Maintenance Procedures January 2016 SS MAINTENANCE INSPECTION REPORT Forme Fae aan ee aT riper Ey Tp overoad(f equpped) Bouts modela onan eagnpe eee tanerace pany woar pads Perform every 4000 hours: pene cot peter reso Mak coil i pe Denies Ee esta tarnonace sSaectne appropiate tutta) BE alos Eno ea atone for the type of inspection to be (D-7 Turntable bearing wear | Deutz models, performed. D-8 Engine maintenance Perform every 12000 hours: Daly or hour Bose neds Soe eons Faroe eo ya ‘Semi-annual or 500 hour (D-TT Replace the hydraulic E-13 Replace the Boom + Place a check in the appropriate box aller each inspection procedure is completed + Use the step-by-step proceduras in this secton to lam how to perorm ‘these inspections. + itany inspection recoves an “N* tag and remove the machine trom servee, ropa and teinspect i Alter ropa, pace a check in the “A box. tegen Y= yes, acceptable 32, famove from service paired 3-6 $-100 » S-105 + S-120 + S-125 Part No. 102916