You are on page 1of 3

WATER LEVEL INDICATOR 

25​th ​October 2020  

SUBMITTED BY :-  
Name​ ​:​ ​Chandra Rakesh Chowdary 

Roll no​ ​:​ ​EE19B1012  

 
 

Page1
 

OBJECTIVES :-  
●​ ​To Reduce Overflow problems.  
●​ ​To Prevent Wastage of Energy.  
●​ ​For Sustainable use of Water and Judicious use 
of Electricity.  

CIRCUIT DIAGRAM :-  

 
Circuit was made by me using Altium design software  

( ​The above picture is a screenshot of circuit in my PC ​) 


 
 
 
Page 2
RESULTS & INFERENCES :-  
●​ ​The water level indicator employs a simple 
mechanism to detect and indicate the water level in 
an overhead tank or any other water container. 
●​ The sensing is done by using a set of three probes 
which are placed at three different levels on the tank 
walls with probe 3 to probe 1 placed in increasing 
order of height, common probe is placed at the 
bottom of the tank.   
● ​The level 1 represents the tank is filled upto 30%, 
The level 2 represents the tank is filled upto 60%, 
The level 3 represents the tank is filled upto 90%. 
 

SCOPE FOR FUTURE WORK :-  


●​ ​Automatic water level controllers can be used in 
Hotels, factories, Apartments, Drainage etc.. 
●​ ​Fuel level indicator in Vehicles. 
●​ ​Liquid level indicator in the huge containers in 
companies. 
  
Page 3

You might also like