Professional Documents
Culture Documents
5. On ICF journal, out of roundness (ovality) must not exceed – 0.015/ 0.020mm.
6. Measured ‘A’ dimension between -Control rod head and barrel face
7. If the ‘A’ dimension of the SAB is reduced- Piston stock is reduced.
12. Check for ‘A’ and ‘e’ Dimension of passenger coach-Every trip
14. What is the choke diameter of guard’s emergency brake valve -5.0 mm
16. The diameter of ball in internal ball valve of cut of angle cock is -10mm
17. Length of air braked Hose is –839 mm
18. Dirt Collector should be cleaning within – At the time of ‘A’ schedule
19. In common pipe
❖ Upper pipe -Brake pipe
❖ Middle pipe -AR Pipe
❖ Bottom pipe -BC pipe
20. Slow charging from outlet of dirt collector can be due to – Gasket damaged
21. POH periodically of DV is -3 year or 8 lakhs km whichever is earlier
22. Air pressure required for WRA (Water raise apparatus) is –
● Minimum pressure -0.35 Kg/cm2
● Maximum pressure -0.75 Kg/cm2
23. Maximum height above rail level for floor of
● any unloaded vehicle is –1345 mm
● loaded passenger vehicle is –1250mm
27. In ICF & RCF bogie, the total height of primary spring and compensating ring should not
exceed – 295 mm
28. The crown clearance “A” between the axle box crown and the bogie frame
● For GS, SPC, SLR, SCN, VPH coaches is -43±0/3 mm
31. The variation in all four-corner height of the bogie must be less then or equal to -10mm
32. Side bearers wearing plate size
● New -10mm
● Condemning -8.5mm
● shop renewal -9mm