Professional Documents
Culture Documents
Mark
By using marking gauge,
draw insertion depth line
on the pipe surface
Monkey wrench
Check
1. Green indicator should be hidden
2. Be sure to check the position of depth line by the gauge end tail
Perfect ! Imperfect Imperfect
Good job ! Too shallow insertion Loose tightening
The line projection is too much The line is invisible
Φ6.4~Φ9.5 Φ12.7~Φ34.9
・Specications, designs and other content appearing in this brochure are current as of march 2019 but subject to change without notice.
Evolutionally-advanced Feature
A combination of rubber packing and screwed metal body ■ Excellent performance ■ Easy installation
offers gas-tight and rigid connection without brazing. By the unique double sealing method, the The installation is completed by only one or
sealing performance is secured over a long two turns for a nut with low torque
Patented “Leverage Method” mechanically holds the pipe and period even under such severe conditions tightening without any special tools (regular
as pressure of 4.3MPa during temperature wrenches or spanners are used) in the
prevents it from pull-out. of - (minus) 45 degree C through + (plus) limited small space.
130 degree C.
Mechanism
As the nut turns, the "B" point of leverage corns are compressed and encroached the ■ Fire free connection
surface of the pipe. When the pull out force increases, the corns are encroached more (Safety first) ■ Authorized standards
deeper to prevent pipe pull out. Neither nitrogen gas replacement nor fire
prevention cure is required. The time for ISO14903
installation is shorten and the total cost is Certification of international standards
Before After
reduced. The installation quality is much Proof of safety and reliability
A more stable compared with a brazing SGBP (Singapore Green Building Council)
method. ・Certificate Number
B SGBP 2019-2405
■ Durable for high pressure
Pull out By leverage method, the pull-out resistance ・Green Mark compatible
Copper Pipe products
force is more than 4 times (17.2MPa) of the max.
operating pressure.
Leverage
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Double Sealing corn
Legends
Name Materials Remark
① O-ring EPDM or NBR Prevent condensation water insertion
②
③
Nut
Leverage corn
C37700
SUS410
Forged brass and machining
Corn shape parts grip the Copper pipe from outside
Matching for various piping sizes
④ Leverage ring PE-RT As support of the leverage corn Dimension (mm) Weight/PC
Figure Model name
⑤ O-ring EPDM Secondly-sealing ND AF L (g)
⑥ V-seal IIR Primary-sealing (Main seal) L
⑦ Main body C37700 Forged brass and machining BDGTA06 φ6.4 19.0 46.2 106
AF
⑧ Indicator Luminous marking Green color / Black-light fluorescent coating
⑨ C-shaped ring SUS304-WPB Tempering treatment
BDGTA09 φ9.5 22.2 51.4 139