Professional Documents
Culture Documents
February 2006
Data sheets for these products can be found in section “Flexible Slabstock Foam/Technical Data Sheets”.
More information is available in section “Flexible Slabstock Foam/Technical Information”.
2
February 2006 Product Guide F-G1
SILBYK-9201 F 532 board stock; block; spray foam efficiency paired with good performance in cell
structure and compressive strength focusing the
construction market needs
SILBYK-9204 F 510 sandwich panels; appliance; integral skin isocyanate compatible, universal, also suitable for
PIR formulations, improved adhesion to liner material
SILBYK-9205 F 516 PUR and PIR board stock; block multiple blowing agent compatibility with high
efficiency, best lambda in panels
SILBYK-9206 F 520 board stock; block; spray foam especially suitable for flame retardant formulations
SILBYK-9210 F 511 thermo moldable rigid foam (e.g., car headliners) open cells
SILBYK-9211 F 527 sandwich panels; appliance high hydrocarbon preblend compatibility, excellent
thermal conductivity
SILBYK-9215 F 531 general purpose rigid foam surfactant standard grade for PUR formulations, blown with
water and/or HCFC and HFC
SILBYK-9230 F 545 one component foam emulsification of blowing agent and cell stabilization
SILBYK-9231 F 546 hydrocarbon blown PUR and PIR foam enhanced compatibilization of formulation components
with wider processing latitude and improved physical
properties of the foams
SILBYK-9241 F 518 integral skin; block; board stock; appliance especially for HCFC and HFC blown systems
SILBYK-9242 F 519 sandwich panels; appliance; board stock good flow properties; for flame retardant formulations
SILBYK-9247 F 528 appliance; pipe insulation very good flow performance, fine cells e.g.
in HC appliance formulations
SILBYK-9420 F 515 laminated boards; block; spray foam especially for flame retardant foams formulations
figure 2
Data sheets for these products can be found in section “Rigid Foam/Technical Data Sheets“.
More information is available in section “Rigid Foam/Technical Information”.
figure 3
Data sheets for these products can be found in section “Molded Foam/Technical Data Sheets“.
More information is available in section “Molded Foam/Technical Information”.
3
ADDITIVES & INSTRUMENTS
order@byk-gardner.de
www.bykgardner.com
This information is given to the best of our knowledge. Because of the multitude of formulations,
production, and application conditions, all the above mentioned statements have to be adjusted
to the circumstances of the processor. No liabilities, including those for patent rights, can be
derived from this fact for individual cases.
This brochure replaces all previous issues – printed in Germany.
BYK-Chemie GmbH
P.O. Box 10 02 45
46462 Wesel
Germany
Phone +49 (0) 281 670-0
Fax +49 (0) 281 65735
info@byk.com
www.byk-chemie.com
02/2006