Professional Documents
Culture Documents
Colorsource ISO12647-2-3-4-6-7 100 x 70 cm, 70 x 50 cm, and 50 x35 cm universal CMYK test form v1.4 - 12/2020 DO NOT REZISE THIS PDF! CROP IT AS INDICATED FOR MATCHING YOUR PRESS PAPER SIZE
680 680
660 660
1
1
650 650
640 640
630 630
620 620
610 610
600 600
590 590
580 580
570 570
560 560
550 550
540 540
530 530
520 520
510 510
500 500
500
Universal Colorsource CMYK test form ISO12647 70 x 50 cm v1.4
490
1
460 460 460
340 340 K%
All-in one chart for MagicPress and MagicPrepress applications: Place it on any production run using sheet fed or continuous print technologies.
CMY%
Step 2:
330 330 330 330
of good printed copies, and then average your spectral measurement data before computing your ICC profile from your averaged measurement file.
film/foil, paper or corrugated). For computing your flexographic printing configuration CMYK ICC profile, please measure above CMYK test chart on a number
after you have matched your ISO12647-6 target standard using MagicPress (Solid inks densities) and then MagicPrepress applications (TVI curves for
enough for computing accurate CMYK ICC profiles, as long as you average measures on a few good prints! You can use it to make your own press ICC profile
Step 3: For flexographic printing only, according to ISO 12647-6, or for building your own CMYK standard: Above chart is the i1 CMYK target 1.1: Quite
1
Bellow CMYK chart
and proofs, and checked using your free Colorsource CMYK_Print_and_Proof application.
Colorsource ISO 12647-2-3-4-6-7 free Color Quality control bar: Can be freely incorporated into your CMYK print
spectral data should
320 320 320 be measured using 320
1
300 300 300 ctrophotometers, 300
after you have
properly set your
290 290 290 solid inks CMYK 290
densities by using
280 280 280
MagicPress. 280
You should measure
this test chart on
270 270 270 270
many good copies
before you save the
1
230 230 230 Download Colorsource press setting software: www.iso12647solution.com/Downloads_and_links.htm 230
100
matte or glossy coated paper with D50 light.
210 210 210 210
90
70
60
40
190 190 190 190
10
30
180 180 180 180
100
80
70
160 160 160 160
I
2 or EF
20
40
P r o ing
150 150 150
y e -One or match 150
80
50
20
Max K No K Visual control: Check bellow high density and low density pat-
ches using a magnifier, in order to check small tones and maximal
90
L = 25 usable black or else ink limits to use in your CMYK ICC profiles.
10% 9 8 7 6 5 4 3 2 1 0 100 99 98 97 96 95 94 93 92 91 90%
090 090 090 L = 50 090
60
40
30
Step 1: Measure one of the two CMYK charts bellow and then open the spectral measurement file with
070 070 070 070
MagicPress application. First chart is OK for setting your solid inks densities matching any ISO12647-
2-3-4-6 standard and controlling your superimpositions. We recommend using the second chart if you Corps 9 - Corps 9 Corps 2 - Corps 2
Corps 3 - Corps 3
Step 0: Check and/or calibrate your printing formes. For lithographic offset plates you can
Corps 8 - Corps 8 Corps 4 - Corps 4
060 060 060 want to build your own CMYK standard, because the CMYK ink% patches allows you monitoring CMYK Corps 7 - Corps 7 Corps 6 - Corps 6
Corps 5 - Corps 5
first produce only the black plate and use Colorsource PLATE software: 060
print contrasts while 0.125 Corps 6 - Corps 6 Corps 7 - Corps 7 0% 10 % 20 % 30 % 40 % 50 % 60 % 70 % 80 % 90 % 100 %
0.25 Corps 5 - Corps 5
you increase your solid Corps 4 - Corps 4 Corps 8 - Corps 8
050 050 050 1 0.50 Corps 3 - Corps 3
Corps 9 - Corps 9 1 050
This is the IDEAlliance ISO12647-7 2009 control bar you can use as well on your prints and proofs and control using free Colorsource CMYK_Print_and_Proof application. CMYK densities.
Corps 2 - Corps 2
0.75
Corps 9 - Corps 9 Corps 2 - Corps 2
Geometrical 50% if plate is calibrated and no gravure curve is used
Slur 1
Check your 50% geometri-
Corps 3 - Corps 3
1 2
Corps 8 - Corps 8 Corps 5 - Corps 5
Corps 4 - Corps 4
040 040 040 Corps 7 - Corps 7 Corps 6 - Corps 6 cal dot area with a magni- 040
3
2 1 Corps 6 - Corps 6 Corps 7 - Corps 7
Corps 5 - Corps 5 fier or measure your offset
4 Corps 8 - Corps 8
plates model N-Factor:
Corps 4 - Corps 4
40% 70%
5 Corps 9 - Corps 9
Corps 3 - Corps 3
030 030 030 Corps 2 - Corps 2
030
1
40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40% 40%
000 000 000 000