URETHANE
1 1
1 MBA URETHANE INSULATION SERVICES is a single propri- |
| etorship established in the year 1981, the same year when ;
1 our precious daughter was born. We have been in this busi- 1
I ness and has served the country by providing and intro- |
! ducing the insulation industry specifically rigid foam pro- \
; cessing for 38 years. We have provided the country wit I
1 Novations when it comes to insulation industry especially |
1 I
1 I
1 I
1 I
1 I
1 I
1 1
1 I
1 I
1 I
tigid foam processing. We are one of the pioneers involv-
ing Polyurethane Rigid Foam products and is still continu-
ing to serve with such high level polyurethane industry.
MBA URETHANE INSULATION SERVICES guarantees our
clients that we can meet your standards when it comes to
Polyurethane Insulation product and services.
MBA Urethane Insulation Services.
2943-E Marisan Arcade,
G. Del PilaPSt
Corner South Super Highway, Bangkal,
Makati City.
Contact no.(+02)844-2807)/'843-1070 / 751-4798
09173195495 /09209684778
Email: mbaurethane@yahoo.comRIGID INSULATION PRODUCTS INCLUDE:
SLABS
PANELS
SPRAY APPLICATIONS.
MOULDED PIPES K 7
FOAM-IN-PLACE
a) 2 COMPONENTS CHEMICALS
BOXES
——
=
THE MAIN APPLICATION OF RIGID POLY URETHANE FOAM
IN CONSTRUCTIONS: Rigid polyure-
thane foamed-cored, factory made,
composite boards are used for the insu-
lation of the envelope of a building (roof,
walls and floors). When the composite
has made rigid facings, such as steel or
aluminum for example, it can be made:
as fabricated sections of walls and roofs
that reduce erection time dramatically
and result in a building that is well insu-
lated at the initial construction stage.
Cut rigid polyurethane foam slabs can
also be used as an insulant. Boards with
thin impervious facings (such as alumi-
num foil) can be used as partial cavity
lining boards, while boards with a facing
such as plasterboard can be used to line
and insulate walls internally- particularly
in the high-rise flats and old buildings
‘with solid walls.
Rigid polyurethane foam can also be
applied directly by spraying to insulate
and seal roof structures, the inside and
exterior walls of any dwellings. Sprayed
foam must always be covered to shield
the foam from UV light and inclement
weather and especially installed inside
of buildings. By pouring the foam reac-
‘tion mixture they can be used for cavity
insulation and also in the manufacture
of foam-insulated and reinforced doors.
IN PLUMBING: Hot water tanks and
pipes are most effectively insulated with
rigid polyurethane foamMany oil stor-
age tanks and pipelines are insulated
with rigid polyurethane foams applied in
site either by spraying or cladding with
cut, profiled slabs as spacer between the
pipes & cladding. This is most effective
when injected into cladded chilled
water pipelines and cold water lines.
IN THE REFRIGRATION INDUSTRY:
Polyurethane foam is nowadays used in
almost all domestic refrigerator and
freezers. It is also the most widely used
insulation for commercial freezers, cold
storage installation, refrigerated vehi-
cles and container transport.
IN SHIPS AND — BOATS: Punc-
tured-proof buoyancy, light-weight stiff-
ness and impact resistance is added ,
and other items such as commercial
ships cold storage and fish holds, where
rigid polyurethane foams fills a cavity to
form a sandwich structure.URETHANE
INSULATION SERVICE
WHY SPECIFY RIGID URETHANE FOAM?
Within the wide range of polyurethane materials manufactured today,
rigid foams are second only to flexible foams in terms of tonnage and
volume produced. The quantity of rigid foam produced has grown at
annual rate of 10 percent- about twice the growth in flexible foam pro-
duction - for many “years. In the Philippines a staggering 25 percent
growth has been achieved to date compared to last year and lot of build-
ing designers are shifting to rigid polyurethane, putting aside the tradi-
tional but less effective insulating materials. Like flexible foams can be
made in a range of densities from less than 10 kg/m3 to about 110 kg/m3
almost solid polyurethane plastics. However the major proportion of
rigid polyurethane foam productions consists of lightweight foams for
thermal insulation with densities from about 28kg/m3 to about
55kg/m3.
Low density rigid polyurethane -
tion that is made by mixing tog -
nents. The foam also has a hit and it is ex-
tremely adhesive during the short time, usually about 1 mi
foams to most of the faci
high. In fact, the strength
material is almost always hi
foam. This means that it is
out tearing the foam itsell a
excellent adhesive properties, facilitates the combinations of low density
rigid polyurethane foam with other materials to make extremely cost ef-
fective, multi-layer structures. A typical low density rigid polyurethane
foam has a density of 30kg/m3 consists of 97 percent gas, entrapped w
ithin the closed cells of the foam. This
explains the unusually high insulation
value of rigid polyurethane foam in
comparison with insulating materials
which rely upon air filled interstices to
reduce the rate of heat loss.RIGID RETHANE MEANS SAVING IN
SPACE, WEIGHT AND COST
The Rigid urethane foam has the lowest
k-factor among all commercial insulation
materials. The lower the k-factor, the
higher the insulating efficiency. The insu-
lating efficiency of Rigid Urethane stems
from its millions of very tiny fluorocar-
bon-filled closed cells. This structure
gives it not only low thermal efficiency,
but also extremely low moisture-vapor
water absorption.
The unique cell structure of rigid ure-
thane accounts for its high strength and
low density. This lightness, combined
with the fact that only about half the
thickness of most insulating materials is
needed for equal insulation value, means
a saving in space and fewer supports.
Rigid urethane is an insulating material
that becomes permanent. installation
since it has heat and chemical resistance,
as well as resistance to rot; and since it
has no food value, it does not attract
fungi, termites, rodents or insects. Being
odorless, it is ideal for use in food process-
ing and storage plants.
Rigid urethane is easy and economical
to install. Its solvent resistance permits a
wide choice of adhesives, and it can be
cut to any shape or size with ordinary
hand tools.
l
l
l
l
l
l
l
l
l
l
l
l
l
| permeability and a high resistance to
l
l
l
l
l
l
l
l
l
l
l
l
I
RIGID POLYURETHANE INSULATION
PIPE COVER AND BOARDS
GENERAL DESCRIPTION:
MBA URETHANE manufactures rigid
polyurethane foam in a wide range of
densities for different applications. Versa-
tile, easy-to-install polyurethane foam in-
sulation for cold process pipe, equipment
& vessel where constant temperature
maintenance is important, temperature
range is -405 degree F to 225 degree F. it
has an exceptionally low k-factor (0.14 at
75 degree F mean temperature), for excel-
lent insulating effectiveness. Saves han-
dling and labor since many require appli-
cations that requires two layers of other
insulation but only one layer of rigid insu-
lation. Closed cell structure results in AN
unusual ratio of high strength to low den-
sity. Insulation will not corrode or attract
fungi, rodents, insects or vermin. Fur-
nished in standard length of 3 feet, com-
plete with kraft paper or aluminum foil
vapor barrier jacketing. Jacketing can
prevent or reduce frost build up or con-
densation in joints between insulating
segments and in laminated areas.
Two different pipe insulation qualities are
available:
Density of 29 to 35 kg/m3 for polyure-
thane pipe & boards insulation with lami-
nation
Density of 40 to 70 kg/m3 for polyure-
thane boards, post and saddle supportsTwo different insulation
qualities are available:
Density of 29 to 35 kg/m3 for poly-
urethane pipe & boards insula-
tion with lamination
Density of 40 to 70 kg/m3 for
polyurethane boards, post and
saddle supports
APPLICATION:
MBA URETHANE's polyurethane
foam insulation can be used in
many different applications; in
process/manufacturing/industri-
al,plants, hotels, shopping malls
and air-conditioning industries.
Standard foam meets the re-
quirements of the DIN 4102, Class
B3. If a higher performance level
is required, we can supply foam
meeting DIN 4102, Class B2 with a
flame spread rate of 2ft2/min
7 ly
i
¢
MATERIAL AVAILABILITY:
Boards/Slabs
Molded Pipe Sections
Pipe fittings including elbow, tee,
valve covers etc.
Pre-insulated pipe section with
spiral/pve/frp jackets
ALSO: Foamed in site (injection)
for pipe & fittings insulation
Spray-foam for cold storage,
roofdeck & metal roof renovation
SIZE & THICKNESS
Pipe sections and fittings up to
1000mm diameter, 3 feet long
Pipe sections and-fitting.can be
manufactured at thickness rang-
ing from 20mm to 200mm
Pd devade =
ROOF INSULATION APPLICATION}INSUL-PROOF: “taecavpieteRoorwesvsiem
Caen Loy
.
Insul-Proof Renovation
MBA Urethane has launched the Insul-Proof waterproofing and insulation
system for remedial roofing treatment. _ ee .
Xternally spray-applied, Insula-Proof is claimed to significantly reduce expansion
and contraction and to eliminate internal condensation, the major causes of roof
deterioration.
When sprayed directly over an existing corroded metal or fragile cement
roof-deck, the sandwich construction of rigid polyurethane insulation and water-
proof membrane is proven to enhance structural rigidity and roof safety.
Solution for roof problems. ;
MBA Urethane's Insul-proof, a combined insulation and waterproofing system, al-
leviates re-roofing problems. Insul-proof is externally applied to existing roofs and
provides structural rigidity, superior insulation and complete waterproofing to
even the most heavily corroded or fragile roof. .
A fast reacting polyurethane system Is sprayed directly onto properly primed
concrete, metal or AC sheet and expands to a thickness of 25mm or more ina
matter in seconds to fix severe leak problems with the original waterproof mem-
brane applied to the concrete ceca or roofs creating a thick, seamless blanket
which insulate, waterproofs and is fully trafficable. The sprayed insulation is then
painted with 2mm liquid waterproofing membrane to provide fully adhered
USES INCLUDE ADVANTAGES
“FLAT, PROFILED OR SLOPED ROOFS *STRUCTURAL RIGIDITY.
“NEW OR EXISTING ROOFS COMPLETE WATERPROOFING
RESIDENTIAL, COMMERCIAL & INDUSTRIAL PROJECTS “HIGHEST INSULATION VALUESPECIFICATIONS OF RIGID URETHANE FOAM.
Classification ‘Type, Grade 2
Density +: 32 kg/m"/ 2 pel (or as specified)
rfactor (75°F mean temperature) (0.14 Beu-infhe-f="F (max)
‘Compressive Strength (parallel to foam rise): 25 PSI (in)
Water Absorption (10"-head, 24 hr.) 4% by volume (max) on cut cells
Volume Change (200°F or -10°F,7 days): +5% (max)
Flammability (ASTM D-1692) elf-extinguishing (Not exceeding
‘50 mm flame spread)
COMPARATIVE DATA ON COMMON INSUEATION MATERIALS
Kfactor | INSULATION |R-VALUE®| Density | THICKNESS
(Bawa) Material (ve-factor) |__Pef__| REQUIRED.
OM Rigid Urethane foam 7i4__| 18-22 | 1inch only
O24 Fiber Glass a7 30 | 1-77 inches
026 Rubber 385 3a inches
[026 | Patysiyrene (Siyropory) | 385 | 2.0 | Dinches |
035, Foam Glass 356 2 ie inches
036 ‘Wood Fiberboard 26 Tie inches
036 Silicate (PeritelCaleium) | 2.78 2 inches:
bik aslo
"Insulation thickness req meet a minimum kfsctr of 0.14 hase on published competitive
tent
SUMMARY OF POLYURETHANE PROPERTIES
Property T Consequence “Benefid/ Remarks
“Thermal Insulation ‘Thinnest Section | More Space
Rigid “Added Strengih | Srvetural Rigidity
‘Adhesion "No adhesive nesded | Economical
| Dimensional Stability” ‘Non-sag, non-heave | Longer Usage/Life
Density Lightweight Handling/Load Fastor
‘Vapor Transmission ess condensation | Ideal for Cold Stores
"*Reduced risk of condensation. Olen means no separate water vapor barter is needed
CONCLUSION
Polyurethane Insulation = Cost-Eifectiveness
“Value beyond Price”