Professional Documents
Culture Documents
001
Swing check valve without lever and weight, designed according to EN1074 - 3, Face to
face according to EN 558 table 2 basic series 10.
Standard flange drilling to EN1092-2 (ISO 7005-2)
16 15 14 13 12 11 10 9 8 6
7
Low head loss
The full bore minimizes pressure loss and allows
maximum utilisation of the pump capacity. The disc is
designed with a steel insert fully vulcanized with
1 EPDM rubber. It provides a drop tight closure and
due to the light weight it requires a minimum of force
H
2
to open/close.
3
DN
The low weight offers easy handling. Disassembly of
5
the valve can be performed without removing the
valve from the pipe system by unscrewing the bonnet
bolts and removing the bonnet assembly including
hinge and disc. In case of damage the necessary
spare parts can be changed before reassembly.
W L
Component list
1. Body
2. Washer
3. Nut
4. Bushing open
5. Disc
6. Hinge
7. Shaft
8. Bonnet gasket
9. Bushing closed
10. O-ring
11. Washer
12. Bolt
13. Bonnet
14. Tab washer
15. Bolt
16. Bolt
DN PN L H W Theoretical
AVK ref. nos. mm drilling mm mm mm weight kg