Professional Documents
Culture Documents
Elasto Valve Rubber Products Inc. - Tel.(705) 523-2026 - Fax.(705) 523-2033 - Toll Free 1-800-461-6331 - sales@evrproducts.com - www.evrproducts.com
C
W F/F
Max. Work
Pressure2 200 200 150 150 150 150 150 150 125 125 75 75 75 50 50 50 50 50
Elastomer Selection Guide Options Replacement Sleeves Styles for the Series 1000 Valve
Ethylene Propylene Rubber (EPDM) Flange Drilling - ANSI, Metric, or
Most effective for applications involving water, steam or diluted acids.
custom drilling classes available.
Reduced Port Sleeve Standard Sleeve
Viton™ (FKM) Chainwheel Controls - For valves
Resists solvents, halogenated hydrocarbons, oxygen, weather, ozone, oils
and chemicals. that are mounted out of reach.
Bevel Gear - Suggested for high
Buna N (NBR) pressure applications or for valves
Resistant to kerosene, moderate chemicals, fats, oils, grease and many
hydrocarbons. where diameter is at least 6" and
pressure is 75 psi or above.
Natural Rubber (NR)
Good abrasion resistance, tensile strength and resiliency. Also suitable when Stem Extensions - Available for
dealing with organic acids, alcohols, ketones and most moderate chemicals. hard to reach or buried service
Hypalon™ (CSM)
valves.
Resists strong acids and bases, ozone, weathering, heat and oxidizing
Funnel Sleeve Double Wall Sleeve
chemicals.
WARRANTY
All EVR products are guaranteed for one full year against defects Distributed by: ELASTO VALVE RUBBER PRODUCTS INC.
resulting from faulty workmanship or materials. If any such
product is found to be defective by reason of faulty workmanship 1691 Pioneer Road, Sudbury,
or materials, upon written notice and return of the product, the Ontario Canada P3G 1B2
defective product will be replaced by us free of charge, including Tel. (705)523-2026 - Fax. (705)523-2033
the shipping charges for the replacement product. Claims for
labour costs and other expenses required to replace such Toll Free 1-800-461-6331 (N.A.)
defective product, or to repair damage resulting from the use Website: www.evrproducts.com
thereof will not be allowed by us. Our liability is limited to the
price paid for the defective product. EVR Products shall not be
E-mail: sales@evrproducts.com
bound by any warranty other than the above set forth unless such
warranty shall be in writing. This literature is published in good
faith and is believed to be reliable, however, EVR Products does
not represent and/or warrant in any manner the above information
and suggestions contained in this brochure. Data presented is
the result of laboratory tests and field experience. ISO 9001 Certified
Elasto Valve Rubber Products Inc. - Tel.(705) 523-2026 - Fax.(705) 523-2033 - Toll Free 1-800-461-6331 - sales@evrproducts.com - www.evrproducts.com
C
W F/F
Max. Work
Pressure2 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 150 150 150
Weight3 5 7 10 15 32 42 51 68 102 123 198 385 529 616 700 770 910 1260
(est.)
1 - inches 2 - psi 3 - pounds Dimensions can be revised to suit custom specifications.
Elastomer Selection Guide Options Replacement Sleeves Styles for the Series 1100 Valve
Ethylene Propylene Rubber (EPDM) Flange Drilling - ANSI, Metric, or
Most effective for applications involving water, steam or diluted acids.
custom drilling classes available.
Reduced Port Sleeve Standard Sleeve
Viton™ (FKM) Chainwheel Controls - For valves
Resists solvents, halogenated hydrocarbons, oxygen, weather, ozone, oils that are mounted out of reach.
and chemicals.
Bevel Gear - Suggested for high
Buna N (NBR) pressure applications or for valves
Resistant to kerosene, moderate chemicals, fats, oils, grease and many
hydrocarbons. where diameter is at least 6" and
pressure is 75 psi or above.
Natural Rubber (NR)
Good abrasion resistance, tensile strength and resiliancy. Also suitable when Stem Extensions - Available for
dealing with organic acids, alcohols, ketones and most moderate chemicals. hard to reach or buried service
valves.
Hypalon™ (CSM)
Resists strong acids and bases, ozone, weathering, heat and oxidizing
Funnel Sleeve Double Wall Sleeve
chemicals.
WARRANTY
All EVR products are guaranteed for one full year against defects Distributed by: ELASTO VALVE RUBBER PRODUCTS INC.
resulting from faulty workmanship or materials. If any such
product is found to be defective by reason of faulty workmanship 1691 Pioneer Road, Sudbury,
or materials, upon written notice and return of the product, the Ontario Canada P3G 1B2
defective product will be replaced by us free of charge, including Tel. (705)523-2026 - Fax. (705)523-2033
the shipping charges for the replacement product. Claims for
labour costs and other expenses required to replace such Toll Free 1-800-461-6331 (N.A.)
defective product, or to repair damage resulting from the use Website: www.evrproducts.com
thereof will not be allowed by us. Our liability is limited to the
price paid for the defective product. EVR Products shall not be
E-mail: sales@evrproducts.com
bound by any warranty other than the above set forth unless such
warranty shall be in writing. This literature is published in good
faith and is believed to be reliable, however, EVR Products does
not represent and/or warrant in any manner the above information
and suggestions contained in this brochure. Data presented is
the result of laboratory tests and field experience. ISO 9001 Certified
Elasto Valve Rubber Products Inc. - Tel.(705) 523-2026 - Fax.(705) 523-2033 - Toll Free 1-800-461-6331 - sales@evrproducts.com - www.evrproducts.com
C
For engineering specifications or when placing your
order, please provide the following information:
A
F/F W
Elastomer Selection Guide Options Replacement Sleeves Styles for the Series 2000 Valve
Ethylene Propylene Rubber (EPDM) Flange Drilling - ANSI, Metric, or
Most effective for applications involving water, steam or diluted acids.
custom drilling classes available.
Reduced Port Sleeve Standard Sleeve
Viton™ (FKM) Chainwheel Controls - For valves
Resists solvents, halogenated hydrocarbons, oxygen, weather, ozone, oils
and chemicals. that are mounted out of reach.
Bevel Gear - Suggested for high
Buna N (NBR) pressure applications or for valve's
Resistant to kerosene, moderate chemicals, fats, oils, grease and many
hydrocarbons. where diameter is at least 6" and
pressure is 75 psi or above.
Natural Rubber (NR)
Good abrasion resistance, tensile strength and resiliency. Also suitable when Stem Extensions - Available for
dealing with organic acids, alcohols, ketones and most moderate chemicals. hard to reach or buried service
Hypalon™ (CSM) valves.
Resists strong acids and bases, ozone, weathering, heat and oxidizing Funnel Sleeve Double Wall Sleeve
chemicals.
WARRANTY
All EVR products are guaranteed for one full year against defects Distributed by: ELASTO VALVE RUBBER PRODUCTS INC.
resulting from faulty workmanship or materials. If any such
product is found to be defective by reason of faulty workmanship 1691 Pioneer Road, Sudbury,
or materials, upon written notice and return of the product, the Ontario Canada P3G 1B2
defective product will be replaced by us free of charge, including Tel. (705)523-2026 - Fax. (705)523-2033
the shipping charges for the replacement product. Claims for
labour costs and other expenses required to replace such Toll Free 1-800-461-6331 (N.A.)
defective product, or to repair damage resulting from the use Website: www.evrproducts.com
thereof will not be allowed by us. Our liability is limited to the
price paid for the defective product. EVR Products shall not be
E-mail: sales@evrproducts.com
bound by any warranty other than the above set forth unless such
warranty shall be in writing. This literature is published in good
faith and is believed to be reliable, however, EVR Products does
not represent and/or warrant in any manner the above information
and suggestions contained in this brochure. Data presented is
the result of laboratory tests and field experience. ISO 9001 Certified
Elasto Valve Rubber Products Inc. - Tel.(705) 523-2026 - Fax.(705) 523-2033 - Toll Free 1-800-461-6331 - sales@evrproducts.com - www.evrproducts.com
Operation of AJ Pinch Valves
To operate EVR AJ Pinch Valves, it takes 25 psi
(+/- 10 psi) of differential pressure to close the
valve tight. For example, if there is a flow of 15
psi running through the valve, expect to require
a minimum of 40 psi on the control side to fully
H ID close the valve.
If possible, throttle the control air to give just
enough pressure to operate the valve. The lower
the pressure, the longer the sleeve will last.
Please note that different elastomer, sleeve,
and application combinations may require
F/F W higher differential pressures.
Max. Work
Pressure2 125 125 125 125 125 125 125 100 75 75 75 50 50 50 50 25 25 25
Weight3 5 7 9 17 32 40 51 70 137 180 257 440 485 625 933 1300 1555 2525
(Cast Iron)
Volume4 .001 .002 .004 .012 .028 .054 .080 .166 .348 .529 1.032 1.815 2.583 3.880 6.579 9.404 12.001 20.116
1 - inches 2 - psi 3 - pounds 4 - ft3 Dimensions can be revised to suit custom specifications.
Elastomer Selection Guide Valve Sizes Lgth.* Diamond Seal
Gasket Standard Sleeve
Ethylene Propylene Rubber (EPDM) 1" 1'
Most effective for applications involving water, steam or diluted acids. Whenever the Replacement Sleeves
1.5" to 4" 2'
Series AJ Valve
Viton™ (FKM) 5" 3'
is disassembled for the Series AJ
Resists solvents, halogenated hydrocarbons, oxygen, weather, ozone, oils 6' to 10" 4' Actuated Pinch Valve
for inspection or
and chemicals. 12" to 14" 5'
maintenance, come in several
16" 6'
Buna N (NBR) EVR
Resistant to kerosene, moderate chemicals, fats, oils, grease and many 18" 7'
recommends
different styles.
hydrocarbons. 20" to 24" 8'
replacing the
Natural Rubber (NR) *Gasket length required diamond seal
Good abrasion resistance, tensile strength and resiliency. Also suitable when for one valve. gasket. Reduced Port
dealing with organic acids, alcohols, ketones and most moderate chemicals. Sleeve Double Wall Sleeve
Hypalon™ (CSM)
Resists strong acids and bases, ozone, weathering, heat and oxidizing
chemicals. When placing your order,
please indicate sleeve material
Butyl (CIIR)
Good resistance to animal and vegetable fats, strong and oxidizing chemicals,
by appending elastomer
oils, heat and greases. abbreviation (CR, NR, etc) to
the model name.
Neoprene (CR) IE: Series AJ-CR
Generally resistant to oil and grease, moderate chemicals, fats, many
hydrocarbons and ozone. Resistant to barnacle growth.
WARRANTY
All EVR products are guaranteed for one full year against defects Distributed by: ELASTO VALVE RUBBER PRODUCTS INC.
resulting from faulty workmanship or materials. If any such
product is found to be defective by reason of faulty workmanship 1691 Pioneer Road, Sudbury,
or materials, upon written notice and return of the product, the Ontario Canada P3G 1B2
defective product will be replaced by us free of charge, including Tel. (705)523-2026 - Fax. (705)523-2033
the shipping charges for the replacement product. Claims for
labour costs and other expenses required to replace such Toll Free 1-800-461-6331 (N.A.)
defective product, or to repair damage resulting from the use Website: www.evrproducts.com
thereof will not be allowed by us. Our liability is limited to the
price paid for the defective product. EVR Products shall not be
E-mail: sales@evrproducts.com
bound by any warranty other than the above set forth unless such
warranty shall be in writing. This literature is published in good
faith and is believed to be reliable, however, EVR Products does
not represent and/or warrant in any manner the above information
and suggestions contained in this brochure. Data presented is
the result of laboratory tests and field experience. ISO 9001 Certified