Professional Documents
Culture Documents
ECCENTRIC REDUCTION,
CAPS, STUB END
BARRED TEES ON DRAWING ASTM A403 WP304/304L/304H -
LATERAL TEES ON DRAWING ASTM A234 WPB - ASTM A234 ASTM A234 WP1 - WP11 - ASTM A403 WP321 / 321H - ASTM DUPLEX - SUPER DUPLEX -
B E N D S: WPC - ASTM A420 WPL6 - WP12 - WP22 - WP5 - WP9 A403 WP347/347H - ASTM A312 INCONEL - INCOLOY - MONEL
LARGE RAY (3D / 5D / WPHY42÷70 - WP91 - WP92 WP316/316L/316H - HASTELLOY - TITANIUM
ON DRAWING
7D / 10D AND SPECIAL
RAY)
FLANGES:
WN - BLIND - SLIP ON
ANSI B16.5 / ANSI B16.47 -
- LWN - SOCKET WELD -
MSS SP44 - API - AWWA
class 150-2500 lbs ACC.
TO ANSI B16.5
ORIFICE FLANGES ANSI B16.35 ASTM A182 F304/304L/304H -
SPECTACLE FLANGES API 590 / ANSI B16.48 ASTM A105 - ASTM A350 LF2 / ASTM A182 F1 - F11 - F12 - ASTM A182 F321 / 321H - ASTM DUPLEX - SUPER DUPLEX -
ANCHOR FLANGES / ASTM A694 F42 - F52 - F60 - F22 - F5 -F9 - F91 A182 F347/347H - ASTM A182 INCONEL - INCOLOY - MONEL
ON DRAWING F65 - F70 - HASTELLOY - TITANIUM
SWIVEL RING FLANGES F316/316L/316H
SPECIAL FITTINGS ON DRAWING
FORGED FITTINGS:
ANSI B16.11
SW / FILETED
SPIRAL JOINT, OVAL & OCTAGONAL JOINT, METAL JACKED
GASKETS ANSI B16.20 Materials: rubber, PTFE, fibers, ceramics, bend, brass, copper, aluminum, stainless steel, carbon steel, soft iron, titanium, austenic
steel for urea category, special alloys, nickel, monel, ect.
I n black condictions, hot plunged galvanised, covered with teflon according to these materials:
STUD BOLTS ANSI B16.5 / ANSI B18.2.2
ASTM A 193 B7/2H B7M/2HM, B8/Gr.8 B8M/Gr.8M 8T/Gr.8T B 16/Gr.4 B6/Gr.6. ASTM A 320 L7/Gr.4-Gr.7 L7M/Gr.7M, ect.
Special products and more piping components Notes
to complete “package solutions”
HDPE PIPES & FITTINGS
FORGED VALVES
REINFORCED NOZZLES
SPLIT TEES
FLANGED TEES
DRIP RINGS
STEAM TRAPS
PIPELINE CLEANING EQUIPMENTS Pig signallers, launchers & receivers
INSULATING GASKETS
CORROSION TEST COUPONS
ANCHOR BOLTS / “U” BOLTS
ORIFICE CALIBRATED PLATES
MANOMETERS, THERMOCOUPLES, GAUGING TOOLS
MANIFOLDS
HOSE CONNECTIONS
STRAINERS
TUBESHEETS
WELDING CONSUMABLES i.g. Strips, wires, electrodes, ect.
COMPACT FLANGES
INSULATING JOINTS
FLOW TEES
Our services Notes
PIPES CUTTING INTO FIXED LENGHTS
SAND BLASTING i.g. PE coating
OUTSIDE SHOTBLASTING and COATING with various primers Hot dipped and electrolytic zinc plating
GALVANIZING
CLADDING
ASSEMBLING acc.to customer´s requirement - i.g. color codes, plastic caps, ......
SPECIAL PACKING & MARKING by land, sea, air
TRANSPORT
Inspections & tests
MECHANICAL TESTS: Tensile test, Impact test, Hot tensile test, Flattening test, Bend test, Step cooling, Hardness test, Simulated heat treatment
CHEMIICAL TESTS: Product analysis, Positive material identification, Strauss test - ASTM A262 Practice “E”, Huey test - ASTM A262 Practice “A”, Hic test, Pitting test,
Ferrite checking, Micrographic & Macrographic test
NON DESTRUCTIVE TESTS: X - RAY, Ultrasonic test, Magnetic test, Die penetrant test
PIPES, FITTINGS & FLANGES
5
6 PIPES, FITTINGS & FLANGES
Flanges
Forged Fittings
PIPES, FITTINGS & FLANGES 7
More components
Special Forgings
Valves
8 PIPES, FITTINGS & FLANGES
CERTIFICATO N.
EMS-2481/S
CERTIFICATE No.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE AMBIENTALE DI
IT IS HEREBY CERTIFIED THAT THE ENVIRONMENTAL MANAGEMENT SYSTEM OF
STEELTRADE S.R.L.
LOCALITÀ CATTAGNINA 29010 ROTTOFRENO (PC) ITALIA
ISO 14001:2004
E AL DOCUMENTO SINCERT RT-09
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
EA:29A
EA:17B
COMMERCIALIZZAZIONE, PROGETTAZIONE E PRODUZIONE, MEDIANTE LAVORAZIONI MECCANICHE E Per informazioni sulla validità
CONTROLLI NON DISTRUTTIVI, DI: TUBI, RACCORDI A SALDARE DI TESTA E FORGIATI, VALVOLE, FLANGE, PEZZI del certificato, visitare il sito
SPECIALI A DISEGNO ED ACCESSORI PER PIPING IN ACCIAIO E MATERIALI NON FERROSI DA 1/2" A 120" www.rina.org
CERTIFICATO N.
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione Ambientale
18843/08/SU
The use and the validity of this certificate are subject to compliance with the RINA document: Rules for the Certification of Environmental Management Systems
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
CERTIFICATE No.
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
Data scadenza
STEELTRADE S.R.L.
For information concerning
Expiry Date 27.11.2011 validity of the certificate, you
CISQ is the Italian can visit the site
RINA SpA Federation of management www.rina.org
Via Corsica 12 - 16128 Genova Italy system Certification Bodies
LOCALITÀ CATTAGNINA 29010 ROTTOFRENO (PC) ITALIA
ISO 9001:2000
Index
PIPES
Chemical analysis & mechanical test for carbon steel pipes pag. 12
Chemical analysis & mechanical test for alloy steel pipes pag. 13
PIPES
Chemical analysis & mechanical test for stainless steel pipes pag. 14
Dimensions and weights of steel pipes to ANSI B 36-10 pag. 15
WELDING FITTINGS
WELDING FITTINGS
Chemical analysis & mechanical test for carbon steel - Alloy steel fittings pag. 36
Chemical analysis & mechanical test for stainless steel fittings pag. 37
Chemical analysis & mechanical test for carbon steel high yeld fittings
for gas pipelines pag. 38
Welding ends pag. 39
Standard sizes LR elbows, tees, reducers, caps pag. 40
Dimensions and weights pag. 42
The purpose of this booklet is to provide a summary of technical standards for pipe and
piping materials used by the oil and petrochemical industries.
We would apologize for any error which you may find as it is not our intention to replace or
improve the existing standards.
PIPES, FITTINGS & FLANGES
Pipes
PIPES, FITTINGS & FLANGES 11
12
Spec. ASTM C% Mn% P% S% Si% Cr% Mo% Ni% Cu% V% Nb% N% Al% Tensile Yield Elong. Impact Hardness
Grade Max Max Max strenght point 2% test (HB)
Mpa Mpa (KCV)
A106 B 0.300 0.29÷ 0.035 0.035 0.10 0.40 0.150 0.40 0.40 0.080 /// /// /// 415 240 30 /// ///
1.06 min max max max max max
A106 C 0.350 0.29÷ 0.035 0.035 0.10 0.40 0.150 0.40 0.40 0.080 /// /// /// 485 275 30 /// ///
1.06 min max max max max max
A333 6 0.300 0.29÷ 0.025 0.025 0.10 /// /// /// /// /// /// /// /// 415 240 30 - 45°C ///
PIPES, FITTINGS & FLANGES
API 5L X60 0.260 1.350 0.040 0.050 /// /// /// /// /// /// /// /// /// 517 413 15.5 ///
WELDED max
API 5L X65 0.260 1.400 0.040 0.050 /// /// /// /// /// /// /// /// /// 551 448 15 ///
WELDED max
TUBIPIPES
/ PIPES
14
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
/ PIPES
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
TUBIPIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
4.500 114.3 0.083 2.11 3.92 5.84 X X X
4.500 114.3 0.109 2.77 5.11 7.62 X X
4.500 114.3 0.125 3.18 5.84 8.71 X X X
4.500 114.3 0.141 3.58 6.56 9.77 X X X
4.500 114.3 0.156 3.96 7.24 10.78 X X X
4.500 114.3 0.172 4.37 7.95 11.85 X X X
4.500 114.3 0.188 4.78 8.66 12.91 X X X
4 4.500 114.3 0.203 5.16 9.32 13.89 X X X
4.500 114.3 0.219 5.56 10.01 14.91 X X X
4.500 114.3 0.237 6.02 10.79 16.07 X X X STD 40
4.500 114.3 0.250 6.35 11.35 16.90 X X X
4.500 114.3 0.281 7.14 12.66 18.87 X X X
4.500 114.3 0.312 7.92 13.96 20.78 X X X
4.500 114.3 0.337 8.56 14.98 22.32 X X X XS 80
4.500 114.3 0.438 11.13 19.00 28.32 X X X 120
4.500 114.3 0.531 13.49 22.51 33.54 X X X 160
4.500 114.3 0.674 17.12 27.54 41.03 X X X XXS
5.563 141.3 0.083 2.11 4.86 7.24 X X
5.563 141.3 0.125 3.18 7.26 10.83 X X
5.563 141.3 0.156 3.96 9.01 13.41 X X
5.563 141.3 0.188 4.78 10.79 16.09 X X
5.563 141.3 0.219 5.56 12.50 18.61 X X
5.563 141.3 0.258 6.55 14.62 21.77 X X STD 40
5 5.563 141.3 0.281 7.14 15.85 23.62 X X
5.563 141.3 0.312 7.92 17.50 26.05 X X
5.563 141.3 0.344 8.74 19.17 28.57 X X
5.563 141.3 0.375 9.53 20.78 30.97 X XS 80
5.563 141.3 0.500 12.70 27.04 40.28 X X 120
5.563 141.3 0.625 15.88 32.96 49.11 X X 160
5.563 141.3 0.750 19.05 38.55 57.43 X XXS
6.625 168.3 0.083 2.11 5.80 8.65 X X X
6 6.625 168.3 0.109 2.77 7.59 11.31 X X X
6.625 168.3 0.125 3.18 8.68 12.95 X X X
6.625 168.3 0.141 3.58 9.76 14.54 X X X
6.625 168.3 0.156 3.96 10.78 16.05 X X X
6.625 168.3 0.172 4.37 11.85 17.67 X X X
6.625 168.3 0.188 4.78 12.92 19.27 X X X
6.625 168.3 0.203 5.16 13.92 20.76 X X X
18 PIPES, FITTINGS & FLANGES
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
3/82 3/82 3/82 XXS
Identification
Nominal Outside diameter Wall thickness Weight
Size API Specifications W.T.
Inches STD
Schedule
Inches mm Inches mm lbs/foot kg/m 5L 5LX 5LS XS
PIPES
3/82 3/82 3/82 XXS