Professional Documents
Culture Documents
1
3
Materials
Applications
Cable entries are intended for use in medium and large Pos. Component Material
size submersible wastewater pumps with Grundfos 1 Cable entry GJS-500 / EN 1.4408
approved unarmoured rubber cables. For different 2 Cable clamp GJS-500 / EN 1.4408
sizes of cables there are eight different cable entry 3 Screw A2-80 or A4-80
sizes. 4 Screw A2-80 or A4-80
5 Washer AISI 316
Technical data
6 Rubber seal RG 6511 HNBR 70
Enclosure class IP68 7 Approval plate AISI 316
Maximum installation depth 20 m
The materials contain less than 7.5 % by mass of
Do not use special Ex cable entries in enclosures magnesium, titanium and zirconium in total.
where the temperature at the point of contact is outside
of the temperature range -5 to +80 °C.
Approval and certificates
Cable
Cable entry
L3
- 0.111
+ 0.025
∅46 H7
L2
+ 0.030
∅65 H7
C2 - 0.000 Max. clearance = 0.175
65 Counterpart
Counterpart ∅D2 - 0.100 Length L3 = min. 25.0
∅65 d8
- 0.146
Rubber seal
+ 0.074
∅80 H9
- 0.000 Max. clearance = 0.178
Thread 80 Counterpart
Body [mm] Screws Clamp screws - 0.030 Length L3 = min. 25.0
ID [mm] ∅80 f9
- 0.104
t max. t min. ∅D4 Size Qty. L4 min. Size Qty. + 0.054
∅100 H8
36 8 21 7 M6 x 30 3 23 M8 x 40 2 - 0.000 Max. clearance = 0.144
100 Counterpart
46 11 16 11 M10 x 30 3 21 M10 x 40 2 - 0.036 Length L3 = min. 21.0
∅100 f8
65 16 25 11 M10 x 40 3 26 M10 x 40 2 - 0.090
80 16 25 11 M10 x 40 3 26 M10 x 45 2
100 21 28 18 M16 x 50 3 31 M12 x 60 2
Flame path gap requirements:
• surface roughness of all flameproof joint does not
Screw connection requirements: exceed 6.3 µm
• screw class A4-80 or A2-80 • flame path gaps are not painted or electroplated.
• coarse thread pitch according to ISO 262 with
tolerance of 6 g/6H according to IOS 965-1 and
ISO 965-3
• screw heads according to IOS 4014, 4017 and 4762
• hole D4 diameter tolerance H13 according to
ISO 286-2.
GRUNDFOS DATA SHEET
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
99174573: Service kit for cable entry ID 80-1
99174574: Service kit for cable entry ID 80-2
99174575: Service kit for cable entry ID 80-3
99174576: Service kit for cable entry ID 100-1
99174577: Service kit for cable entry ID 100-2
99174578: Service kit for cable entry ID 100-3.
99157528 0417
ECM: 1187679
Subject to alterations.