Professional Documents
Culture Documents
3000 RS232 Bluetooth Wireless Technology Adaptor Installation Instructions
3000 RS232 Bluetooth Wireless Technology Adaptor Installation Instructions
adaptor
The 3000 RS232 Bluetooth® wireless technology adaptor (the adaptor) allows a Tru-Test 3000 series indicator
(the indicator) to connect wirelessly with a Tru-Test XRS Stick Reader (the stick reader) or other Bluetooth
enabled EID reader. The adaptor is supplied as an accessory (Tru-Test part number 810985).
Note: This adaptor is not required for an XR3000BT indicator which has built-in Bluetooth wireless technology.
The adaptor has a range of up to 100 m (330’), depending on the environment.
Troubleshooting
If the stick reader automatically connects to another Bluetooth enabled device instead of the indicator, turn off the other device and start the pairing procedure
again.
Pairing may fail if there are too many Bluetooth enabled devices in the vicinity. Once the stick reader has found 10 devices, it stops searching for others.
If your Bluetooth enabled EID reader is not a Tru-Test XRS Stick Reader, your reader must be capable of being the Bluetooth master device. The adaptor is a
slave device only.