Professional Documents
Culture Documents
02b.2.01.2.2d General Information On Adjusting Valve Clearance
02b.2.01.2.2d General Information On Adjusting Valve Clearance
30-N-1000-01B General information on adjusting valve Engine 541, 542, 941, 942
clearance Method 2
A Outlet valve
E Inlet valve
x Flywheel side
N01.00-0200-01 N01.00-0201-01
Method 2:
Set inlet and exhaust valves at two crankshaft positions, as shown
in the table.
6 Cylinder 8 Cylinder
First position cylinder 5 in valve overlap TDC First position cylinder 6 in valve overlap TDC
(cylinder 1 in ignition TDC), then position cylinder 1 in valve overlap (cylinder 1 in ignition TDC), then position cylinder 1 in valve overlap
TDC (cylinder 5 in ignition TDC). TDC (cylinder 6 in ignition TDC).
1 2 3 4 5 6 7 8
© Daimler AG, 8/4/12, G/05/12, ah05.30-n-1000-01b, General information on adjusting valve clearance Page 1 of 1
ENGINE 541, 542, 941, 942 Methode 2