Professional Documents
Culture Documents
Material Properties Reinforcement Details: Design of Concrete Column Seismic Detailing
Material Properties Reinforcement Details: Design of Concrete Column Seismic Detailing
Owner: - Mark: C1
Location: - Location: 10
Check by: Mark Christian D. Esguerra Date: 10/02/2022
Section Properties
Width = 250 mm Stirrup fy = 276 MPa Spacing Tie = 100 mm
Height = 250 mm Stirrup bar = 10 mm Confinement = 75 mm
Length = 2.97 m
NSCP2015 Sec 418.7.5.3 Spacing of transverse reinforcement shall not exceed the least of(a) through(d):
(a) One-fourth of the minimum column dimension
(b) For Grade 420, 6db of the smallest longitudinal bar
(c) For Grade 550, 5db of the smallest longitudinal bar
(d) so, as calculated by s_o = 100 + (350-hx)/3
Maximum Spacing Limit Inside Lo : 62.5mm
Actual Spacing inside Lo: 75mm Non-Code Complaint
NSCP2015 Sec 418.7.5.4 Amount of transverse reinforcement shall be in accordance with Table 418.7.5.4
The concrete strength factor kf and confinement effectiveness factor kn are calculated according to Eq. (418.7.5.4a) and (418.7.5.4b).
where n1 is the number of longitudinal bars or bar bundles around the perimeter of a column core with rectillinear hoops that are laterally supported
by the corner of hoops or by seismic hooks.
Required # Leg Along X : 4pcs Actual # Leg Along X : 3pcs Non-Code Complaint
Required # Leg Along Y : 4pcs Actual # Leg Along Y : 3pcs Non-Code Complaint