Professional Documents
Culture Documents
Data
Important Safety
Information
Read this page before selection, improper assem- WARNING: Testing can fluids or flying projectiles. To
using any of the infor- bly techniques, failure to cor- be dangerous and avoid serious bodily injury or
mation in this catalog. rectly inspect and test hose should be done only by property damage resulting
This catalog is designed to assemblies, and improper trained personnel using from selection of the wrong
be used as a guide in select- cleaning practices and hose proper tools and procedures. hose, you should carefully
ing the proper hose for the assembly storage tech- Failure to follow such proce- review the information in
applications listed herein. It niques. dures might result in serious this catalog. Some of the
contains many cautions, In turn, these situations can injury, death, or damage to factors to consider in proper
warnings, guidelines, and lead to material leakage, property. hose selection are:
directions for the safe and spraying, spattering, end Consult the coupling • hose size
proper use of Boston hose. blow-offs, explosions, and manufacturer to make
All these directions and foot- • hose length
other situations that may sure you choose the
notes should be read and result in serious personal correct coupling and • hose ends
understood before specify- injury and property damage. proper assembly for the • fluid conveyed
ing or using any of these application, or contact
hoses. Personal injuries caused by • bends
improper hose assembly Eaton Technical Support.
Throughout this catalog, • temperature
specification, installation, Before using any hoses in
potentially harmful situations and usage could include this catalog, consult the • hose pressure
are highlighted with the fol- cuts and abrasions, serious safety section in this
lowing symbols. • static head pressure
burns, irreparable eye dam- catalog, and Chemical
This symbol is used to age, or even death. Compatibility Chart on • installation design
indicate imminently Therefore, for your safety page 21 or Boston Hose These factors and the sup-
hazardous situations which, and the safety of others Chemical Resistance plemental information con-
if not avoided, will result in working around you, Eaton Guidelines. If you do not tained in this catalog should
serious injury or death. strongly urges you to read have the most recent be considered in selecting
This symbol is used to and comply with all safety copy, contact Eaton the proper hose for your
indicate potentially information printed in this Customer Support at application. If you have any
hazardous situations which, publication. 1-888-258-0222. questions regarding the
if not avoided, could result in WARNING: Failure to proper hose for your applica-
serious injury or death. properly follow the Selection of Hose tion, please contact Eaton
manufacturer’s recommend- Selection of the proper at 1-888-258-0222.
This symbol is used to
indicate potentially ed procedures for the care, Boston hose for an applica-
hazardous situations which, maintenance and storage of tion is essential to the prop-
if not avoided, may result in a particular hose may result er operation and safe use of
property or equipment dam- in its failure to perform in the hose and related equip-
age. the manner intended and ment. Inappropriate hose
may result in serious injury, selection may result in hose
Some of the most common death, and damage to prop- leakage, bursting, or other
problems in the chemical erty. failure which may cause
hose industry result from serious bodily injury or prop-
improper hose and coupling erty damage from spraying
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 3
Application
Data
Important Safety
Information
Proper Selection If you have any questions These hose assembly instal- Coll-O-Crimp Hose, Hose
of Hose Ends regarding the use of lation factors and the other Ends and Assembly
Selection of the proper hose/hose ends, please con- information in this catalog Equipment Compatibility
Boston hose end or coupling tact Eaton Technical Support should be considered by you The Coll-O-Crimp Equipment
is essential to the proper at 1-888-258-0222. before installing the hose Package, Coll-O-Crimp Hose
operation and safe use of assembly. If you have any Ends and Coll-O-Crimp Hose
hose assemblies and related Hose Installation questions regarding proper have been engineered and
equipment. Inadequate Proper installation is essen- hose installation, please con- designed as a complete
attention to the selection of tial to the proper operation tact Eaton Technical Support hose assembly system.
the end fittings may result in and safe use of the hose at 1-888-258-0222. Each component of the Coll-
hose leakage, bursting, or assembly and related equip- O-Crimp hose assembly sys-
other failure which may ment. Hose Maintenance tem is compatible with other
cause serious bodily injury Improper hose assembly Proper maintenance of the Coll-O-Crimp components to
or property damage from installation may result in hose is essential to the safe which it relates. Component
spraying fluids or flying pro- serious injury or property use of the hose and related compatibility, along with the
jectiles. In order to avoid damage caused by spraying equipment. Hose should be use of quality components,
serious bodily injury or prop- fluids or flying projectiles. In stored in a dry place. Hose insures the production of
erty damage resulting from order to avoid serious bodily should also be visually reliable hose assemblies
selection of an incompatible injury or property damage inspected. Any hose that when assembled properly.
hose end or coupling, you resulting from improper has a cut or gouge in the The use or intermixing of fit-
should carefully review the hose assembly installation cover that exposes the rein- tings and hose not specifi-
information in this catalog. carefully review the informa- forcement should be retired cally engineered and
Some of the factors which tion in this catalog. Some of from service. Hoses should designed for use with each
are involved in the selection the factors to be considered also be inspected for kinking other and Coll-O-Crimp
of the proper hose couplings when installing a hose or broken reinforcement. If equipment is not recom-
are: assembly are: the outside diameter of the mended and may result in
• fluid compatibility hose is reduced by 20% or the production of unsafe or
• hose elongation or more, the hose should be unreliable hose assemblies.
• temperature contraction repaired or removed from This can result in hose
• installation design • proper bend radius/hose service. Inadequate atten- assembly leakage, hose sep-
routing under pressure tion to hose maintenance aration or other failures
• hose size
may result in hose leakage, which can cause serious
• corrosion requirements • elbows and adapters to bursting, or other failure bodily injury or property
relieve strain which may cause serious damage from spraying flu-
• fluid conveyed
• protection from rubbing bodily injury or property ids, flying projectiles, or
The given hose and hose end or abrasion high temper- damage from spraying flu- other substances.
selection factors and the ature sources ids, flying projectiles, or
other information contained other substances.
in this catalog should be con- • protection against
sidered by you in selecting excessive movement
the proper hose end fitting • twisting from pressure
for your application. spikes/surges
4 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
Air & Multi-
Purpose Intro
Important Air & Multi- WARNING: Never use WARNING: Selection Every Hose is Easily
Purpose Hose Safety a hose to transfer of the proper hose for Identified
Information! material it is not specifically the application is essential to • Every foot of hose is easi-
WARNING: Testing can meant to transfer. Doing so the proper operation and safe ly identified by means of
be dangerous and could deteriorate the hose use of the hose and related permanent branding. This
should be done only by and result in leaking, hose equipment. Inadequate atten- makes hose selection on
trained personnel using bursting, or end blow-offs. tion to selection of hose for the job quicker, easier and
proper tools and procedures. This could lead to serious the application can result in safer, and buying hose is
Failure to follow such proce- personal injury or death. serious bodily injury or prop- easier too—because you
dures might result in serious Always transfer material in a erty damage. In order to can tell at a glance that
injury, death, or damage to hose that is designed specif- avoid serious bodily injury or you're getting exactly the
property. ically to transfer that materi- property damage resulting hose you ordered.
al. This information is listed from selection of the wrong
WARNING: Failure to in this catalog. hose, you should carefully Multi-Purpose Hose for
properly follow the review the information in this Specialized Uses
manufacturer’s recommend- WARNING: Consider
both working pressure catalog. • Eaton calls them "MULTI-
ed procedures for the care, PURPOSE" hoses, mean-
maintenance, and storage of and pressure surges when
determining “maximum” AIR & MULTI-PURPOSE ing they'll do a tremen-
a particular hose may result HOSE BENEFITS dous variety of jobs. In
in its failure to perform in the pressure. Failure to select a
hose that meets both these 4:1 Safety Factor (Burst: many cases one Boston
manner intended and may hose can replace several
result in serious injury, death, requirements could lead to Working Pressure)
end blow-offs, hose leakage, different "special purpose"
or damage to property. • Safer operation. styles. This helps keep
and hose bursting. The
WARNING: Consult result could be serious injury • Longer hose life. expenses low.
with the Coupling or death. The Boston hose • Full range of sizes and Brand Name Identity (and
Manufacturer to make sure you choose must meet or styles. the quality that goes
you choose the correct cou- exceed the required working behind it)
pling and proper assembly pressure, and must have a • Boston multi-purpose
for the application. Such hoses are designed to • With the Boston brand
safety factor to allow for
matching of hose and cou- match capability with the name on the hose you
surge pressure.
plings, and assembling of job you need to do. buy, you are assured
couplings, should be per- WARNING: Be aware Boston brand products maximum value and
formed only by trained per- that if you replace a offer a well-rounded consistent quality.
sonnel using proper tools hose with one having a dif- choice of hose styles for With over 100 years
and procedures. Failure to ferent I.D. than the original services ranging from worth of reputation at
follow manufacturer’s hose, material velocity could high pressure use in stake, we wouldn't have
instructions or failure to use increase or decrease, possi- heavy construction to eco- it any other way.
trained personnel may result bly creating static electricity. nomical hose for light
in serious bodily injury This could lead to an explo- duty agricultural and
and/or property damage. sion causing serious injury industrial applications.
or death.
38 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
High Working
Pressure
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 39
Hose
High Working
Pressure
40 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
High Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) LENGTH (FT)
H962208 1/2 12.7 1 15/16 23.8 34 1,000 50
H962208-100 100
H962208-150 150
H962212 3/4 19.1 1 1-3/16 30.2 44 1,000 50
H962212-100 100
H962212-150 150
H962216 1 25.4 1 1-1/2 38.1 61 850 50
H962216-100 100
H962216-150 150
H962220 1-1/4 31.8 1 1-23/32 43.7 81 500 50
H962220-100 100
H962220-150 150
H962224 1-1/2 38.1 2 2-1/8 53.9 150 500 50
H962224-100 100
H962224-150 150
H962232 2 50.8 2 2-21/32 67.4 204 500 50
H962232-100 100
H962232-150 150
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 41
Hose
Medium Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. REINF. NOMINAL O.D. LBS. WEIGHT MAX. WORKING MTO* MIN. STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) ORDER QTY. LENGTH (FT)
H600208 1/2 12.7 2 Br 29/32 23.0 31 400 — 50
H600208-100 100
H600208-150 150
H600212 3/4 19.1 2 Br 1-3/16 30.2 46 400 — 50
H600212-100 100
H600212-150 150
H600216 1 25.4 2 Br 1-1/2 38.1 67 400 — 50
H600216-100 100
H600216-150 150
H600220 1-1/4 31.8 2 Ply 1-13/16 46.0 86 400 — 50
H600220-100 100
H600220-150 150
H600224 1-1/2 38.1 2 Ply 2-1/16 52.4 99 400 — 50
H600224-100 100
H600224-150 150
H600232 2 50.8 2 Ply 2-5/8 66.7 127 300 — 50
H600232-100 100
H600232-150 150
H600248 3 76.2 2 Ply 3-9/16 90.49 192 200 600 50
H600248-100 100
H600248-150 150
*MTO–Made To Order
42 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
Medium Working
Pressure
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 43
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) LENGTH (FT)
H177704-500R 1/4 6.3 1 1/2 12.7 11 325 500
H177604-500R 1/4 6.3 2 19/32 15.1 15 325 500
H177705-500R 5/16 7.9 1 5/8 15.9 17 325 500
H177706-500R 3/8 9.5 1 21/32 16.7 17 325 500
H177606-500R 3/8 9.5 2 23/32 18.3 20 325 500
H177708-500R 1/2 12.7 1 13/16 20.6 24 325 500
H177608-500R 1/2 12.7 2 7/8 22.2 31 325 500
H177610-500R 5/8 15.9 2 1 25.4 36 325 500
H177612-500R 3/4 19.1 2 1-5/32 29.4 44 325 500
H177616-300R 1 25.4 2 1-7/16 36.5 46 325 300
H177620-300R 1-1/4 31.8 2 1-3/4 44.5 65 325 300
H177624-300R 1-1/2 38.1 2 2 50.8 82 325 300
44 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING MIN. BEND STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) RADIUS (IN.) LENGTH (FT)
H20104 1/4 6.3 1 1/2 12.7 8 250 3 50(GY,BU,RD,GN,YW,BK)
H20104-250R 250(GY,BU,RD,GN,YW,BK)
H20104-500R 500(GY,BU,RD,GN,YW,BK)
H20106 3/8 9.5 1 21/32 16.7 13 250 3 50(GY,BU,RD,GN,YW,BK)
H20106-250R 250(GY,BU,RD,GN,YW,BK)
H20106-500R 500(GY,BU,RD,GN,YW,BK)
H20108 1/2 12.7 1 3/4 19.1 15 250 5 50(GY,BU,RD,GN,YW,BK)
H20108-250R 250(GY,BU,RD,GN,YW,BK)
H20108-500R 500(GY,BU,RD,GN,YW,BK)
H20110-250R 5/8 15.9 1 15/16 23.8 20 250 6 250(GY,BU,RD,GN,YW,BK)
H20112-250R 3/4 19.1 1 1-1/16 27.0 26 250 7 250(GY,BU,RD,GN,YW,BK)
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 45
Hose
Low Working
Pressure
46 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. SPIRAL NOMINAL O.D. LBS. WEIGHT MAX. WORKING MTO* MIN. STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) ORDER QTY. LENGTH (FT)
H27503-600R* 3/16 4.8 2 27/64 10.7 6 250 6,000 600*(RD)
H27504 1/4 6.4 2 1/2 12.7 7 250 — 50(RD,BU,YW)
H27504-600R 600*(RD,BU,YW)
H27505-600R* 5/16 7.9 2 33/64 13.1 8 250 6,000 600*(RD)
H27506 3/8 9.5 2 5/8 15.9 12 250 — 50(RD,BU,YW)
H27506-600R 600*(RD,BU,YW)
H27508 1/2 12.7 2 3/4 19.1 15 250 — 50(RD,BU,YW)
H27508-500R 500*(RD,BU,YW)
H27510-500R 5/8 15.9 2 57/64 22.6 21 250 — 500*(RD)
H27512 3/4 19.1 2 1-1/32 26.2 23 250 — 50(RD)
H27512-500R 500*(RD)
H27516 1 25.4 2 1-5/16 33.3 34 200 — 50(RD)
H27516-200R 200**(RD)
H27520-100 1-1/4 31.8 2 1-11/16 42.9 52 200 — 100**(RD)
H27524-100 1-1/2 38.1 2 1-15/16 49.2 61 200 — 100**(RD)
H27532-100 2 50.9 2 2-1/2 63.5 91 125 — 100*(RD)
Stated working pressures are tested at 68°F. Working pressure decreases as temperature increases. See chart on page 14 showing the relationship between working pressure and
temperature for reinforced PVC hose.
*MTO–Made To Order
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 47
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) REELS (FT)
H994904-500R 1/4 6.3 2 19/32 15.1 15 275 500
H994906-500R 3/8 9.5 2 23/32 18.3 19 275 500
H994908-500R 1/2 12.7 2 7/8 22.2 27 275 500
H994912-500R 3/4 19.1 2 1-5/32 29.4 41 275 500
H994916-300R 1 25.4 2 1-7/16 36.5 64 275 300
48 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. SPIRAL NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) REELS (FT)
H198104-600R 1/4 6.3 2 1/2 12.7 10 200 600(RD)
H198204-600R 1/4 6.3 4 5/8 15.9 13 300 600(RD)
H198105-600R 5/16 7.9 2 5/8 15.9 12 200 600(RD)
H198205-600R 5/16 7.9 4 11/16 17.3 13 300 600(RD)
H198106-600R 3/8 9.5 2 11/16 17.3 15 200 600(RD)
H198206-600R 3/8 9.5 4 3/4 18.3 18 300 600(RD)
H198108-600R 1/2 12.7 2 13/16 20.6 19 200 600(RD)
H198208-600R 1/2 12.7 4 7/8 25.4 23 300 600(RD)
H198210-600R 5/8 15.9 4 1-1/32 26.2 25 300 600(RD)
H198112-250 3/4 19.1 4 1-3/16 30.2 37 225 5-50’s(RD)
H198112-600R 3/4 19.1 4 1-3/16 30.2 37 225 600(RD)
H198212-250 3/4 19.1 4 1-3/16 30.2 37 300 5-50’s(RD)
H198212-600R 3/4 19.1 4 1-3/16 30.2 37 300 600(RD)
H198216-450R 1 25.4 4 1-7/16 36.5 64 200 450(RD)
EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003 49
Hose
Low Working
Pressure
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) REELS (FT)
H11604-550R 1/4 6.3 1 1/2 12.7 10 225 550
H11504 1/4 6.3 2 19/32 15.1 15 300 50
H11504-550R 550
H11605-550R 5/16 7.9 1 5/8 15.9 14 225 550
H11505 5/16 7.9 2 21/32 15.9 14 300 50
H11505-550R 550
H11606-550R 3/8 9.5 1 21/32 16.7 15 225 550
H11506 3/8 9.5 2 3/32 18.3 19 300 50
H11506-550R 550
H11608-550R 1/2 12.7 1 13/16 20.6 21 225 550
H11508 1/2 12.7 2 7/8 22.2 27 300 50
H11508-550R 550
H11512 3/4 19.1 2 1-5/32 29.4 41 300 50
H11512-550R 550
H11516 1 25.4 2 1-7/16 36.5 46 250 50
H11516-300R 300
H11520 1-1/4 31.8 2 1-3/4 44.5 65 225 50
H11520-300R 300
H11524 1-1/2 38.1 2 2 50.8 82 225 50
H11524-300R 300
50 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003
Hose
General Air
& Water
Refer to warnings and safety infor-
mation on pages 3-4 and page 38.
APPROX.
PRODUCT NOMINAL I.D. BRAID NOMINAL O.D. LBS. WEIGHT MAX. WORKING STANDARD
NUMBER (IN.) (MM) (IN.) (MM) PER 100 FT. PRESS. (PSI) REELS (FT)
H181204-500R 1/4 6.3 2 19/32 15.1 16 275 500
H181205-500R 5/16 7.9 2 21/32 16.7 17 275 500
H181206-500R 3/8 9.5 2 23/32 18.3 19 275 500
H181208-500R 1/2 12.7 2 7/8 22.2 27 250 500
H181210-500R 5/8 15.9 2 1 25.4 36 250 500
H181212-500R 3/4 19.1 2 1-5/32 29.4 41 250 500
H181216-300R 1 25.4 2 1-7/16 36.5 46 250 300
H181220-300R 1-1/4 31.8 2 1-3/4 44.5 65 250 300
H181224-300R 1-1/2 38.1 2 2 50.8 82 250 300
52 EATON Boston Transfer Hose Products Master Catalog B-HYOV-MC001-E December 2003