Professional Documents
Culture Documents
7\ ; :
BRUHAT BANGALORE MAHANAGARA PALIKE
—
i sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated)
' fusing AKZO Nobel! - Great Wall Powder to the thickness of 80 - 120 microns. All metal parts are tested in our salt spray Neen?
that uses @ 5% NaCl solution in accordance to {S07227 to speed up corrosion for 3000 hrs. The seat is made from
_——
LLDPE. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have
' in limitors that prevent unwented and ecesssive movement, which can cause injuries. The limitors must be in
with EN 16630 safety norms. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance :
according to EN16630 and the maintenance guide. Size (L*W * H) 830 MM x 500MM x 1450 MM . Capacity 1
pers ee AR Teves aad Transportation Charges
. _ {Supply & fini ng ofBicycle : All productsmust tested and certified to meet EN16630 safety standards with GS test mark. The
ee oi
:
BS E
catesi: must be issued by a reputed notified international Certifying Body such as PEMA, TUV, CPSC, or SGS
in the name of asupplier who has carried out a minimum of 100 public park ;
aeN | 16630
1630+ p bex ucts either by the
certifiedmust
certificates
esor through their dealers or contractors. These = |
ae.
ertificates ly displayed on the notified certifying bodies websites as online verification is
ce PROT
nical bid. All products must clearly display th = ; mark as has been issued in the EN16630 safety =]
&
ie
£ ee
steel of 2.5¢ es are galvanized and zinc dipped. ints are Robotic Welded. All welded joints |
x
2 dressed off removing al sharp edges & =| - ca ;
iy
163438.00| 163438.00 | 168281.00) 168281.00
rea
ieee lala coated che Pe.
retested our salt spray machin
: ineae omoulde :
a aye: =
ahs
wo.| .
ah: R. fins ia
ebiteatin of Work ea jaa ee
“WIS Sheila Agenies
eee
Amount |
meagan.
So IG
gD & fixing of Big Shoulder Wheel : All products must tested aad certified te mec
set | NIG 630 safety standards with GS test|
mark. The EN16630 certificates must be issued by 3 reputed notified International Certifying Body such as IPEMA, TUV, CPSC
OF SGS only. The GS mark-EN 16620 certificates must be in the name of a supplier who has carried outa Liiiee
of 100 3
public perk projects in india with EN16630-GS certified products ether by themselves or through their dealers or contractors
These EN16630 & GS Mark certificates must be clearly displayed on the
notified certifying bodies websites as online
verification is mandatory during technical bid, All products must clearly display the GS mark as has been issued in the
EN16630 safety certificates. All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded.
3 All welded joints are scalloped as necessary and welded to an approved MIG process, All welds are dressed off removing all 161850.00} 161850.00
sharp edges & burrs. Zinc Primer paint is applied at all the welding oaints prior to finishing. All metal parts are powder coated
using AKZO Nobel - Great Wal! Powder to the thickness of 80 - 120 nicrons. All metal parts are tested in our salt spray
machine that uses 2 S% NaCl solution in accordance to 1S07227 to speed up corrosion for 3000 hrs. Bearings : Maintenance-
ee bell bearings. Equipment which have sway and moving parts, must have built in limitors that prevent unwanted and
ecesssive movement, which can cause injuries. The limitors must be in accordance with EN16630 safety norms. Scope of
c : L completely pre-assembled equipment modules. Maintenance : Maintain according to £N16630 and the
ce guide. Size {L"W * H) 845 MM x 810MM x 1710MM Capacity 2 persons. Inclusive of All Taxes and
—
seriiienies must tbe issued by a reputed notified International Certifying Body such as IPEMA, TUV,
16630 certificates must be in the name of a supplier who has carried out a minimum of
certified produc's: elthor by themselves or through their dealers or
cts must clearly display the GS mark as has been issued in the
ed and zinc dipped. Joints are Robotic Welded.
AIG proces. All welds are dressed off removing all 00| 182700.00 | 188475.00} 188475.00
10 finishing. All metal parts are powdercoated
metal parts are tested in our salt spray
pentnsion for 3000 hrs.The seat and backrest is
ah Ly,
Executive Engines)
Project Division
Yelahanka Zone
BBMP, pengeiete sa
Scanned By Camera Scanner
—e - | ! ns Koochie Play Mi Hugo Piayi Py ile |
hee WS
ene Sheila Agenies
Unit lOty }- ~ Rate Unit Amount cane eens| Ratel Unit oeAmount |
Descriptionof Work _| NateRate/ | VO _ beter tinea : ina >
ena Se : a
.
eily & fixing of Leg Stretch: Al! products must tested and certified to meet £N16630 safety standards with GS test mark |
|
The EN16630 certificates must be issued by @ reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS
The GS mark-EN 16630 certificates must be in the name of a supplier who has carried out a minimum of 100 public park
in india with EN16630-GS certified products either by themselves or through their dealers or contractors. These
EN36630& GS Mark certificates must be clearly displayed on the notified certifying bodies websites as online verification is
mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety
ificates. All Tubular steel of2 Smm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints
| so996.00 | $0996.00 | 52606.00 | $2606.00
scelloped es necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & Fach! 1 | 48800.00 | 48800.00 | 50996. WIN ' v
Zinc Primer paint is applied at all the welding paints prior tofinishing. All metal parts are powder coated using AKZO
~ Great Well Powder to the thickness of 80 - 120 microns. All metal parts are tested in our salt spray machine that uses
em NaCl solution in accordance to 1807227 to speed up corrosion for 3000 hrs. Bearings: Maintenance-free ball bearings.
Equipment which have swey snd moving parts, must have built in limitors that prevent unwanted and ecesssive movement,
hich cen cause injuries. The limitors must be in accordance with £N16630 safety norms. Scope of delivery : 1 completely pre-
E d equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)
MM x 810 MM x 1135 MM _. Capacity 3 persons. inclusive of All Taxes and Transportation Charges
Supply & fixing of Pull Down Challenger: All products must tested and certified to meet EN16630 safety standards with GS
tes mark. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV,
me te = EN 16630certificates must bein the name of a supplier who has carried out a minimum of
i a ne
cae process. Al wieldsa are dressed off removing all pela \aeen 336 igh
coe nts flortofinishing, All metal parts are powder coated ac 00.00 | 2 : 000.00 | 309024.00} 309024.00 | 318496.00| 318496.00 Ve a
| parts are tested in our salt spray ieee ee
‘sion for 3000 hrs. The seat and backrest is
quipment
i which have sway and moving parts,
can Cause injuries. The limitors must be in
y1ed equipment modules, Maintenance ;
x 840 MM x 2200 MM , Capacity2
we PTL Sa ae aa ak in | | ! K oot hie Play \ wis Huge Play Pv lid | wis, en !
‘ seamen u eee MIS She ae
Unit | Qty. Tater Unit Sheila Agenies
ceifiec’
ta
wey
¥
Description of Work Unit || Qty. -——
Wis noocn ) Mlb nugo r fey rvi. LLG Wd oNevwa AgeniEs
Amourit T\ Rate! U nit Amount Rate/l Unit
S Must be in the Name of a supplier who has carried out
in excess of at least SO public
ae or through their dealers or contractors. These EN16630 & GS Mark certificates
mo merc bodies websites as online verification is mandatory, All products must
in the EN16630 Safety certificates. All Tubular steel of 2.5mm thickness are
Scanned B
Fa es All welded joints are scalloped as necessary and welded to an
: off Femoving all sharp edges & burrs. Zinc Primer paint is applied at all the Each} 1 | 199100.0| 199100.00 | 208259.00} 208259.00 | 214431.00| 214431.00
: Allmetal parts are powder Coated using AKZO Nobel- Great Wall Powder to the thickness of
tal nats are tested in Our
o salt spray machine that uses a 5% NaCl solution in accordance to 1S07227
de of alloys of Nylon having good thermal stability. Internal Limited means
ball bearings. Scope of delivery: 1 completely pre-assembled
¢: Maintain according to EN16630 and the maintenance guide. Size (L*W* H) 1150 MM x
r Inclusive of A\l Taxes and Transportation Charges
products must tested and certified to meet EN16630 safety standards with GS test
issued
: by 2 reputed notified International Certifying Body such as PEMA, TUV, CPSC,
; st be in the name of a any who has carried outa minimum of 100
) mark as has been issued in the
zinc dipped. Joints are Robotic Welded. 5 ee
l welds are dressed off removing all if ‘
parts are tested in our salt spray ee
rash on for 3000 hrs. Footplates made of alloys Sate
crush points. Bearings : Maintenance-free
mitors that prevent unwanted and
e with EN16630 safety norms. Scope of
in according to £N16630 and the
uti
oa. Nivision
Yelahanka Zone
i », Bangalore-92
Scanned By Camera Scanner
I WiS Kao chie Flay M/S Huge Play Pvt Lid “MIS Sheila Agenies
Unit Qty, Amount | Rate/ Unit |
Rate/ Unit_| Amoum Rate/ Unit Amount
|
,
Each 162500.00 162500.00 169650.00 169650.00 175013.00 175013.00
| {80-120
hacnavamicrons.
ss Ail metal
formapartsnare «.,
tested‘oai Our salt spray machine that Sy 3 5% NaCL solution in accordance to 1807227
as es hae 2 - - made of alloys of Nylon having good thermal stability. Internal Limited means
Sa ae adie Bearings ke pearthenanice:- free ball bearings. Scope of delivery : 1 completely pre-assem
bled
ate poerterance : Maintain according to EN16630 and the maintenance guide. Size (L*W
* H) 1460 MM x
- Capacity 3 persons. Inclusive of All Taxes ard Transportation Charges
95 X 90X 152 CM. The unit must consist of 4 wave
roi e grips without
& any holes or gaps to prevent
d toan ergonomically curved, monolithic large arc tube center pillar without convex sides
ordern aesthetic look. The wall thickness of the main curved center pillar is
Each 232130.00 232130.00 237469.00 237469.00 241647,00 241647.00
rt. ades are connected to high grade Teflon resistance
eners, All nuts enclosd in Polyamide
powder electrostatic
tain of two A.R.M MODULES (
ntraction] connected to a
drop less and provide 0-30
movable] to ensure it is safe
Each ; }.379270.00 379270.00 388372.00 388372.00 395199.00 395199.00
ping off. Finishing to be
. The handles are of 3mm
a
ess, TorxAnti Vandal Fasteners,
ransportation Charges
_ Executive En Aebrhs
Project Nivisio n
Yelahanka Zone
BBMP, Bangalore-92
idee
my
" , Co
. :
Unit | \Oty \+ 00% ne - Ptstay
wis 5 Koochie __ \ | _ WIS fr
wis Huge y Play eee Waid Shella Aaanlen
of Work
‘
zi
i
x
oe se
ed
nee Pe
Bar