Professional Documents
Culture Documents
This real component-based trainer provides students and Remove, clean, inspect, and measure brake drums
instructors with the opportunity to demonstrate and Remove, inspect, and install wheel cylinders
investigate the operation of a typical automotive braking Pre-adjust brake shoes and handbrake
system. The trainer is designed to allow access to disc and Mount brake drum on lathe; machine braking surface
drum brake components, as well as providing the
Remove, clean, and inspect pads and retaining hardware
opportunity to understand the operation of the hydraulic
circuit.
Remove, clean, inspect, disassemble, reassemble,
lubricate, and reinstall calliper assembly
The trainer can also be used in conjunction with our Clean, inspect, and measure brake disc with a dial
optional cloud-based software, which offers online practical indicator and a micrometer
tasks as well as interactive theory presentations, Remove and replace brake disc
investigations, and assessments, which link directly to the Check handbrake cables and components for wear,
practical activities carried out using this resource. rusting, binding, and corrosion
Adjust callipers with integrated handbrake system
The Trainer Includes the Following Components: Diagnose poor stopping, noise, pulling, grabbing,
Handbrake assembly dragging, or pedal pulsation concerns
Diagonally split hydraulic circuit
Master cylinder Items Included:
Brake fluid reservoir Trainer
Brake pedal and light Power supply unit (12V 5A)
Front hubs, discs and callipers
Other Items Required:
Rear hubs and drums
Automotive workshop tools
Typical Practical Tasks Include:
General Information:
Friction brake theory
Trainer Dimensions (W x D x H):
Drum brake components and operation 1200 x 800 x 1410 mm / 47 x 32 x 56 inches
Disc brake components and operation
Drum brake machining Packed Volume: Approx. 2.17m3 / 77ft3
Drum brake servicing Packed Weight: Approx. 215kg / 475lb
Calliper servicing Packed Dimensions (W x D x H):
Disc measurement and inspection 1444 x 946 x 1590 mm / 57 x 38 x 63 inches
Handbrake components and operation
Remove, clean, and inspect brake shoes, springs, pins, The image shown is for illustrative purposes only –
clips, levers, adjusters, and backing support plates actual product may vary due to product enhancement.