Professional Documents
Culture Documents
Release Notes
v19.1.x
Release Notes
v19.1.0
1. Introduction
This document contains all the information about problems fixed during development of ANSA from
version 19.0.2 to version 19.1.0.
NOTES:
ANSA databases saved by ANSA v19.1.0 can be opened with v19.x.x but not with v18.x.x or
previous versions.
Copyright notes:
All other company and product names mentioned in the software and its documentation are property, trademarks or
registered trademarks of their respective owners.
ANSA-77986
BCS-1351
Subsystems and Includes Colours are now exported during output from ANSA to
solvers file format.
ANSA-78888
Settings All the Product Tree Editor settings are moved to separate tab.
ANSA-75562
Show Complete Solids option is now supported for light volume representation.
ANSA-68097
Deck Info
Mass information about KIN_BODY entities is now available in the Deck Info report
59583, ANSA-38208
Snapshot
48150, ANSA-30227
Snapshot tool now allows to take snapshots of pulldown menus hierarchy by using
the "Active popup" picture mode and the setting "Include active popups parent
popup".
ANSA-59591
BCS-2173
The Part field of Transformation options is now enhanced with the "Current Part" and
"Existing Part" options and the PID field with the "Current Property" option.
ANSA-70150
Lists The selected entities of a list are now marked on the vertical scroll-bar. This new
feature provides an overview of the selected entities location in very big lists.
ANSA-77930
Database ASKETCH
Browser
Sketch entities are now able to be visualized as independent entities and handled
through the DB. They are also accessible through scripting.
ANSA-80416
LOCK VIEW
Stored Lock Views are now able to send their content to the Current Function (Send
to: Current Function).
60948, ANSA-39188
Feature Loop
Selection Feature Line
ANSA-58581
A drop down menu in the "Name" field of the "New Lock" window now provides the
names of any existing locked views.
Text auto-completion is also provided, when typing coincides with the existing
names.
BCS-397
In case errors exist in the mesh, the "Checks Manager" window now pops-up
indicating them.
BCS-1448
View The MODEL draw mode option in META Viewer is now also supported through
KOMVOS.
BCS-2615
ANSA-69033, ANSA-72098
BCS-2139
Translators CATIA
The following attributes are now read, when importing a 3DXML file:
TSLA_PART_NUMBER
TSLA_CA
TSLA_GenerateDO
BCS-647
Export JT
BCS-211
64337, ANSA-41642
ANSA-71585
"Open group files" has been added; by default the checkbook is not activated,
meaning not to translate entities referenced by groups.
ANSA-54325
ANSA-78957
GUI
General Feature Selection
"Pick" button has been added in the Feature Selection toolbar to activate the Pick of
an open list.
In case more than one lists are open, the button affects the last opened/used one.
A default and modifiable keyboard shortcut Alt+P is also available.
ANSA-76640
Small CONS are not highlighted anymore; info about small CONS is printed in the
ANSA Info window.
64541, ANSA-41784
The Views Manager now allows customization and recording of additional Default
views (typically: F keys). These may be recorded in "views" files, re-used between
databases and shared with META. Capability had already been partially available.
19607, ANSA-11355
New setting has been added to enable controlling the zoom direction with mouse
wheel.
BCS-578
Utilities Annotations
ANSA-72041
When the option is enabled, while Drawing Styles> Wire is disabled, the latter now
prevails, i.e. the Wire is not drawn.
ANSA-70846
Snapshot
"Custom" size settings are now kept, when saving GUI settings.
ANSA-73881
Model Browser
General It is now possible to modify fields of model browser entities that belong to higher level
containers, through the Quick Modify function in the column header and the Modify
option of the context menu. For example, the 'Modify' option is now available in
context menu of Subsystems that are placed under a Simulation Model.
ANSA-62364
New option "Map front" added in Mass Trimming creation, to map only the front
elements when connectivities overlap.
57441, ANSA-36736
When the Model Browser is in Icon view mode it will not display the thumbnail icon of
very large volumes, in order to avoid delay in opening.
ANSA-81636
The attribute "Is Empty" is now available for all Model Browser Containers, in order to
facilitate the identification of empty entities through scripting, as well as the compress
functionality.
ANSA-67394
General The "DM Update Status" column, which displays the status of the loaded Model
Browser containers in DM, now shows a new status for those items that have
changed since they were downloaded from DM and therefore, they need to be saved
again. So, from now on, the DM column can display the following status values:
ANSA-74232
ANSA-79624
ANSA-73209
Simulation Output
Runs
Applying Output from context menu option on Simulation Run, a check for the
compatibility of the combination of the Simulation Model and the corresponding
Loadcase is now performed. In case of fail an appropriate message informs about the
compatibility error and the process is aborted in order to avoid the output of an invalid
file. For example it is not valid to combine a META FRF ASSEMBLY Loadcase,
created with Loadcase Setup Assistant, with a simulation model which has
subsystems of regular type.
ANSA-76804
DM Save in DM
During "Save in DM", if a conflict is detected with data that already exist in the data
pool, it is now possible to write a comment logging the modifications that were made
before creating a new version of the item.
ANSA-77479
When copying a Part from one model to an other, a new option provides the ability to
open the Custom merge Option window. In this window, any possible ID conflict
between the selected part and the target model can be checked; solving these ID
conflicts per model entity group is now controllable.
ANSA-51881
CAD to ANSA New option is now provided that provides priority to open the attached ANSA files
instead of checking for existing Part representations in DM ("Use attached ANSA files
instead of checking in DM").
ANSA-78955
It is now able to stop the CAD to ANSA process through the Pause/Break button.
Once pressed, the button waits for all currently running parallel jobs to conclude and
then terminates the process.
ANSA-77919
Replace The following improvements have been made regarding the update of Connections\
Connectors\ GEBs connectivity during Replace Part:
Scripting GetPartLinks()
GetPartInstances()
ConnectPartInstances()
BreakPartInstances()
New functions are supported to manipulate or inspect Part Instances and Part Links.
ANSA-72862, BCS-1017
Scripting base.GetEntityDMUpdateStatus(entity)
The "DM Update Status" of an entity is now able to be identified through scripting. A
constant value is returned according to the value of "DM Update Status".
ANSA-80026
Compare
General It is now possible to customize how the Models are displayed while navigating the
differences.
ANSA-78995
Data Management
General Save in DM
A new script function is now able to run automatically, when saving a part/subsystem
in the DM; this may be achieved by defining the new options via the ANSA.default
settings:
PrePostSaveRepresentationScriptFunctionName
PrePostSaveRepresentationScriptFilePath
The function runs 3 times when applying Save In DM: Before, During and After the
save representation operations.
The arguments of the function are:
-entities: The parts/subsystems that are being saved
-deck
-info_dict: A dictionary. It contains one member whose value is the state where the
script function is called:
{"PrePostSaveRepresentationFunctionCallState", state}
where:
-state=0 -> before save representation
-state=1 -> during save representation
-state=2 -> after save representation
ANSA-77285
BCS-1705
A new option has been added so as to control if reapplication of connections will take
place when applying Parts>Replace or DM>Download operations on Parts.
ANSA-77800
DM Browser Export
The selected items in DM Browser list are now able to be exported to a specified
directory, while the Representation File of a keyword File Type item can be opened in
text viewer.
ANSA-46569
Refresh
ANSA-76066
The "Refresh" function has been renamed to "Rebuild from Disk", in order to reflect
the operation carried out. The function, available only for file based DMs, rebuilds the
DM database by scanning the DM directory contents. A warning window now
appears to inform the user for the operation that will be carried out and confirmation
is requested in order to proceed.
ANSA-78266
Scripting base.GetIncludeReferenceFileText()
ANSA-48192
dm.GetObjectHierarchyIds()
New function has been added to get hierarchy related information for all directly
contained DM objects.
ANSA-81674
ANSA can now act as a remote execution worker, also when running in GUI mode.
ANSA-75791
When clicking Add/Remove all the shells from the connectivity P1, P2, ..., Pn will be
highlighted for all selected connections.
If all connections share the same connectivity, then all the affected shells will be
highlighted as blue.
If at least one connection has different connectivity, then all the affected shells will be
highlighted as cyan.
Moreover, a warning window message has been added, if part already exists,
whether to "Allow connection to connect the same (part/prop/entity) more than
once?".
Closing, a "Don't ask me again" checkbox has also been implemented, which can be
reset via Tools > Settings > Connections setting.
ANSA-69869
ANSA-77251
A new mechanism for the evaluation of the status of connections has been
implemented.
According to the previous behavior, a realized connection would lose the 'Ok' status
for almost every change that occurred in the connected parts. Such changes
included, among others, the editing of any field in the entity card of a connected
property, and the mesh reconstruction in a remote to the connection area.
As a result, the loss of a connection's 'Ok' status could not be used to indicate a
problematic condition.
Now the connection status is evaluated in a more precise way. Changes in the
connected parts that do no affect the integrity of a realized connection, do not lead to
loss of the 'Ok' status.
New option has been added to force the realized entities of a Connection to be set in
the Connection Include, instead of the Current one.
BCS-1689
ANSA-75199
Bolts Speed enhancement when realizing solid bolts on second order tubes.
ANSA-48715
Connectors When creating a new Connector Entity between 2 Assembly Points the direction of
the Connector Entity is now automatically calculated and filled in the card.
ANSA-64962
The name of the Connector/ GEB can now be passed to the created entities. This
option is controlled via the Tools> Settings> Connections [Connector/Geb/IO], by
activating the respective flags.
ANSA-57531
A POINTs/ LC It is now possible to control the id, name and comment of the node marked by an
POINTs Assembly or Loadcase Point. This is achieved by activating the new A/LC-POINT
option "Copy attributes to Interface Node", which will force the Id, Name and
Comment of the A/LC-POINT to the interface node.
For the control of the node id in particular, the moment the A/LC-POINT is applied,
the node is automatically marked as FROZEN_ID = YES. If this set-up is in place but
ANSA fails to allocate the desired node id for the interface node on Apply, the A/LC-
POINT will not be applied successfully. Additionally, if while the A/LC-POINT is
successfully applied, the marked node loses its id, the A/LC-POINT will lose its ok
status and will report the id incompatibility with status "interface node incompliance".
ANSA-75601
BCS-2018
Edit Location
New option has been added in the context menu of a connection entity in the
connections list. Using this functionality, the location of a Connection can easily be
changed by a screen selection.
BCS-2030, ANSA-71069
Connection properties such as Spotweld/ Bolt Diameter (D), Seamweld width (W)
and orientation, Adhesive Width (W) and Height (H) etc. are now represented and
synchronized by respective xMCF 3.0 parameters.
ANSA-78372
The option to create 3D points at the position of converted Spotweld Points has been
added.
ANSA-76251
Elements that consititite SPIDER2s are now converted to spotwelds with FE-
Representation SPIDER2.
ANSA-67431
When a Heat Affected Zone is identified, the FE Rep Type of 'SOLID Nugget' is
assigned.
ANSA-77088
FE to Seamline
ANSA-80231
Remove The algorithm, when the 'Distance between projection centers' option is activated,
Double has been modified. Now, only the distance of the projection centers is considered to
detect duplicate connections.The distance between projections of the same
connection is not taken into account anymore. If the specified value is larger than the
distance between the projection centers the connections are identified as duplicates.
BCS-2048
Communication between the list of double connections and the graphics area has
been improved; highlighting of the picked connections and Pick from screen has
been implemented.
ANSA-70914
Scripting The respective "tangential_direction" argument is now available for "misc" dictionary
on each call of the PostRealize function for Spotlines.
ANSA-81963
FE Representations
BOLT/ BOLT An Assembly Point that is created during the realization of a Bolt connection will be
NULL SHELL/ now deleted, if the Bolt is realized again having the 'Create Assembly Point' option
BOLT ON deactivated.
SOLID/ BOLT
RIGID
PATCHES ANSA-77179
BOLT ON A new option 'All Tubes Expand Interface To' for Tubes Search in order to expand
SOLID interface either to top/bottom or all rings is now supported.
ANSA-49206
Y-JOINT- It is now possible to specify the width of the FE Representation as a function of the
SHELL/ seamline 'W' value.
OVERLAP-
SHELL/
CRIMP-
WELD-SHELL ANSA-79748
CWELD In NASTRAN, the option Force CWELD Flange criteria has been renamed to Force
SWLDPRM Criteria to follow the NASTRAN terminology.
ANSA-55579
Cohesives A new FE representation type, Pasted Cohesives, has been added to Hemmings. In
this representation, compatible mesh between the inner and the outer flange and
Cohesives are created.
ANSA-73623
DYNA SPOT The capability to assign 'PBEAM ID' 'By Flange Pair' is now supported.
WELD
BCS-680
EDGE-WELD- All the types of FEMFAT BUTT-WELD with respective MAT IDs have been supported
FEMFAT under EDGE-WELD-FEMFAT representation.
ANSA-58843
EDGEWELD A new SeamLine FE-representation is now available, with cross section PENTA-
SOLID HEXA-PENTA definition and Contact interface entity. Options in order to control the
PID assignment and the connection size are also available.
ANSA-79524
FEMFAT When realizing FEMFAT SPOTWELD, the Young Modulus of connectivity parts is
SPOT taken now into account. Specifically, if sheet material is steel, MAT151 and MAT152
are generated for inner and outer zones respectively. If sheet material is aluminum,
MAT154 and MAT155 are generated for inner and outer zones respectively. The
seperation value of Young Modulus for steel and aluminum is defined on defaults.
ANSA-77672
FEMSITE- The FEMSITE Module v44, which features a new Abaqus representation for
SPOTWELD spotwelds, containing Couplings is now supported.
Choosing between the 2 Abaqus-specific representations can be done through
'Abaqus Spec' option.
ANSA-77676
RBE3-SHEL- 'Loose Ends' option to project the ends of the seam line on the detected feature line
RBE3 in order to define the effective length of the connection or not is now supported.
ANSA-80346
ANSA-82224
ANSA-80232
Double fillet of weld is now supported through Seam Shape = Double-Sided Fillet
setting.
ANSA-80175
SOLID-WELD Solid welds are now always created with curved endings. The following assumptions
are taken into consideration:
-Extension at start/end: unchecked
SolidWeld body is created with curved endings. The total length
of solidWeld body is equal to connection line's length.
-Extension at start/end: checked
SolidWeld body is created with curved endings.
Length: undefined
The length of solidWeld body, without its curved endings, is
equal to connection line's length. The length of curved ending is
equal to MAX( width_left, width_right, height, depth )
Length: defined
As Length: undefined. An extra solidWeld part between solidWeld
body and ending. This extra part has length equal to the defined.
ANSA-75887
SOLID The new scheme 'CONTACT' now offers the ability to use cohesive elements.
NUGGET
BCS-2031
New hexa mesh pattern for PASTED_NODES Sheme and Num of Nodes = 16.
ANSA-55551
A new solid mesh pattern is created in case of 12-Node Solid Nuggets that have the
'Force Pentas in Nugget' option deactivated. The new pattern consists of 8 Hexa
elements.
ANSA-67406
Y-JOINT- The root shells = triple row is now supported by applying offset row in both sides of
SHELL sheet.
22225, ANSA-13098
ANSA-79525
Y-JOINT- The option to generate only HEXA elements is now available. There is also the ability
SOLID not to Reconstruct the corresponding weld area.
ANSA-63814
Topo
CONS Project
Function has been enhanced, so that projection onto to a Work Plane, or Cross
Section plane, is an acceptable option.
60558, ANSA-38901
The newly created CONS can now be added to a SET, when enabling the respective
option of the Options List.
52537, ANSA-33224
Faces Cut
Right mouse click on a CONS (i.e. Join) is now able to be applied also in case its
midpoint is snapped.
BCS-1238
Tangential cut option is now available; selecting a source to cut and hovering on a
CONS or a Feature Line, the triangle feature with the dotted line denotes tangential
cuts from source to hovered target.
ANSA-82736
"Imprint" option has been added to project a CONS to the middle surface, eliminating
problems of mesh flow, e.g. at fillet boundaries.
BCS-606
Skin user interface has been revised to a much more intuitive and user-friendly
version.
Key-points/highlights:
b) The user can directly modify the _faces_ color – further increasing convienience in
defining the 3 areas.
27969, ANSA-16756
ANSA-76958
A wizard has been added to enable manual edit of the initial Skin result.
It is now possible to edit edges or faces and color the inner/outer/middle of the 3D
description with red/green/blue colours, respectively. In addition, annotations at
problematic areas are now illustrated, describing the type of the error.
46088, ANSA-14622
Curves Create
Normals on hotpoints and grids are now displayed, when hovering in their supposed
direction. In addition, when dragging a normal or a tangent snap is allowed on nodal
and intersected surface entities.
ANSA-82746
The option "Apply to" has been added under the Options List. Cross sections are now
able to be created from selected Elements or elements loaded in Morphing Boxes.
The Path shrinkage factor option has also been added, when Apply to [Morph Box] is
selected. It is used to reduce the automatically detected path of the Multicut function.
ANSA-81434
Shell Mesh
General Mesh Parameters [Distortion angle]
-Basic tab
BCS-1751
ANSA-76846
Solid holes with fillets on geometry are now able to be detected and filled.
ANSA-72690
Shell Mesh Regarding Solid holes option, it is now possible to identify holes with fillets.
ANSA-71912
Improve
It is now possible to save which of the Reshape or Reconstruct to be used for the
mesh improvement.
This is saved in the ANSA.defaults file, via Tools>Settings.
BCS-1446
Elements Release
BCS-2390
To Surface
When function is applied on a part without Fe perimeter the FE perimeter Editor now
automatically opens, in order for the recognition to be directly performed.
ANSA-76887
ANSA-80780
Scripting base.CalculateOffElements()
ANSA-73899
Volume Mesh
Checks Mesh [Negative Volume]
A new parameter has been implemented that defines the calculation method
(Partial/Total) of the check. Therefore, from now on, the calculation method of the
check is independent of the calculation method defined in F11>Solids.
61860, ANSA-39848
Structured Layers
Mesh
Improvements in robustness and quality of layer connections on triple and single
boundaries.
(Accessible also through MESH> Volumes> Layers [Create]).
New option "Unconstrained 2nd order nodes" has been added to allow unconstrained
movement of the middle nodes, ignoring the bound constraints.
ANSA-64634
Fix Quality is now restricted on non-wall BC type properties. Nodes are only sliding
on BC types: symmetry, velocity_inlet, patch
Nodes are frozen on periodic BCs.
64677, ANSA-41877
In Quad-Tria Interfaces and periodic boundary conditions, nodes are now considered
as frozen and they are not moved.
In symmetry type boundary conditions, nodes are allowed to move only on the
surface.
44200, ANSA-27729
ANSA-77707
Octree All Octree entities can now be saved and read for re-using in other models. Filters
within Octree should exist prior output. After reading, with "Autoload" the contents of
the octree will be filled accordingly.
BCS-1395
Batch Meshing
Sessions Report
The Error Class message in case of unmeshed volumes has been changed to
"Unmeshed Volumes" instead of "Unmeshed Macros".
ANSA-78790
Scripting batchmesh.GetNewBox()
New function has been added to enable a Box entity creation under a batch mesh
session.
ANSA-73781
Feature Manager
General Newly created features like 2D and 3D Holes, Tubes, Fillets etc. are now directly
listed and managed within the Feature Manager.
ANSA-76889
Design Copy
Actions
When a feature is copied its treatment is now automatically applied.
BCS-2169
Features which are connected to solid elements are now excluded from Design
Actions Move/Copy.
ANSA-71037
DECKs
Properties Mat Sync
BCS-2448
Elasto - plasticity and Thermo - elasto - plasticity analysis type is supported for the
homogenization of composite materials with plastic phases.
Automatic RVE mesh generation and FE Homogenization method is available.
ANSA-76402
In 'Transformation Options' window, using the 'Copy/Expand' options for Set, a new
flag 'Convert Ranges to Entities' has been added which affects the copies of Sets
that involve Ranges of entity ids.
47486, BCS-1118
When a template is used in the Contact Assistant the Contact type field is now
disabled and set according to the selected template contact type.
ANSA-52090
AUXILIARIES SET
When the Sets>Copy function is executed, a new option is available in the Options
List window, which enables suspend of set expansion for nested sets. This option is
also added in the ANSA defaults settings (Settings>Decks>Copy: Sets option
Expand/None).
58100, BCS-1121
Line Elements are now colored according to the temperature that is assigned to their
nodes.
BCS-1874
Scripting base.OptimizeSetContents()
New function has been added to optimize set contents by replacing them with higher
level entities. If possible, Nodes are converted to Elements, which in turn are
converted to Properties. The function can also (optionally) replace Solid Properties
with solid skin (SOLIDFACETs).
ANSA-77933
Laminates
AUXILIARIES LAMINATE [LIST]
As soon as a laminate property is selected in the Laminate Tool, the base mesh now
becomes transparent.
If a single layer is selected, this layer becomes shaded; if more than one layer is
selected, the layers remain transparent.
33745, ANSA-20770
In the .png images that are generated for each layer the base mesh will be
transparent, providing better visualization of the layer.
BCS-2636
Tools
Batch Mesh Wrap Scenario
The option for Seed points in the Wrap process is now available through the Batch
Mesh tool.
BCS-1759
Features Parameters
60052, ANSA-38541
The Definition and Execution modes of the Optimization Task from now on alter
automatically.
Symbols appear next to undefined task items providing information about their status.
The 'X' symbol appears next to an undefined task item, while the '!' symbols lead
towards it.
The Optimization Task can be executed once all task items are properly defined.
ANSA-79161
Undo function would cause the Task Manager list collapse, needing manual
expansion after each application of Undo button.
ANSA-68963
Checks Connections
In the results' list, "Show Options" context menu option has been added to control the
"Fe rep" and "Connectivity" visibility.
58546, ANSA-37485
Duplicate Elements
Apart from the speed execution that has been significantly increased, the function
had been enhanced as follows:
- It extracts a new, more enlightening report.
- It offers the new check parameter 'Report semi-duplicate solids', for searching semi-
duplicate elements. Such elements could be a combination of Hexas and Tetras, for
example, that share common nodes.
Nevertheless, the old functionality is still available, via the option
'Enable_deprecated_Duplicate_Elements_check', under Tools > Settings > ANSA
defaults > Checks Manager Options.
ANSA-66571
Check execution now displays the Part/PID Name(s) of the affected Part/PID
respectively, as separate attributes in separate columns.
BCS-705
Accepted values for the above option have been changed to "Contact", "Isurface"
and "Pretension".
ANSA-79114
Accepted values for the options have been changed from 0/1 to true/false.
ANSA-79114
The name of the above option has been changed from "Search for template on
reference Database" to "Search for template on:".
ANSA-79114
The option "Update Clearance / CINTERF" of Contact Flanges Data card can now be
saved in ANSA.defaults file.
ANSA-79114
Safety
General The name of the target point is written in each new master file, if keyword *TITLE is
found in master file. This applies to all safety tools that support the multi positioning
functionality.
ANSA-80413
Dummy Articulation
GNS Files [Input .ses file] button has been added to allow the selection of a GNS
session file and its execution.
BCS-1031
For PAM-CRASH dummy models, 'Rotations' keyword of pos file is now supported.
BCS-1350
Dummy The Tree View order of the *.pos file is now maintained.
BCS-1931
For PAM-CRASH dummy models, the precision definition is now supported for writing
Generator session files.
The definition is via the parameters 'Generator session file rotation precision' and
'Generator session file translation precision' as found in the ANSA Settings >
OUTPUT PARAMETERS > Pam-Crash output options.
BCS-1934
Output information for all the joints into the GNS session file is now supported.
BCS-1936
Input/ Output
For PAM-CRASH dummy models, input and output of Generator session files has
been updated and re-organized.
Input is available through:
-Articulation tool> Rotate tab> GNS files
-the KIN_POSITION context menu list of 'New' 'From GNS file'
Output is available through:
-Articulation tool> Rotate tab> GNS files
-the KIN_POSITION context menu entity of 'Convert to' 'GNS file'
BCS-1933
Output
ANSA-80913
BCS-1932
Seat Generator session files for the positioning of PAM-CRASH seat models are now
supported. Input is available through the KIN_POSITION context menu list of New
[From GNS file].
ANSA-76784
Pedestrian It is now possible to position an impactor in "Test Point" mode that is made only of
solid elements.
ANSA-70379
A button is added that controls visibility of debug entities within the Pedestrian tool.
ANSA-80200
Pedestrian For the Positioning tab and the Multi-Point Mode, in the Options the flag 'Copy files in
each directory' is now supported.
It works in cooperation with the 'Use relative name for includes'. In case both flags
are enabled, the function will work as it used to work till now when 'Use Relative
Names' was enabled. In case 'Copy files in each directory' is not enabled while the
other is, the tool will try to calculate a relative path for each target point's master file
according to the initial master file and the output directory.
ANSA-76883
EUPhase2 EC Proposal for legform has been updated to the latest UN-R127
guidelines with the below
• 42mm offset is applied by measuring along Y-axis
• 1003mm is set as the upper limit.
BCS-952
From now on in the NCAP protocols, the projection of the Target Points is horizontal
if the center point of the respective WAD line (instead of each Target position) is
forward the BLE.
ANSA-77943
A step-by-step interactive marking tool for FMVSS201U has been added. The
specific tool offers the ability to:
ANSA-77831
Target points can now be created by directly giving the required coordinates.
37196, ANSA-23021
When Target Points are created massively, a unique index is now assigned at the
and of the name of each entity.
ANSA-64218
Scripting base.ASeatbelt()
BCS-1601
Seatbelt Tension tool has been supported in python script using the object
'tension_component' of 'ASeatbelt' method.
ANSA-76057
NASTRAN
General SPLINE2
SPLINE1
PAERO1
MKAERO1
FMETHOD
FLUTTER
FLFACT
CAERO2
CAERO1
AERO
AEFACT
New keywords for aeroelastic analysis (SOL 145) are now supported.
ANSA-73220
BCS-2136
Materials MAT1F in MAT1 card, MAT2F in MAT2 card, MAT8F in MAT8 card, MAT9F in MAT9
card and MAT10F in MAT10 card are now supported.
BCS-623
ANSA-75583
ELEMENTs GENEL
5346, ANSA-3154
New option with which the orientation of a Field Point of ISO3744 type can be defined
with reference to a coordinate system has been added.
ANSA-60644
SOL200 [DVPRELi]
The DVPREL1 keyword now supports Thickness, for segment(s) of the cross section
with specified properties (cseg_prop field) and PBxSECT beam properties.
ANSA-78556
BCs ISTRESS
IPSTRAIN
IPSTRAIN and ISTRESS keywords for strain and stress initial conditions respectively
are now supported, accessible also by the newly created menu buttons.
32761, ANSA-20158
Scripting Ability to handle the creation and editing of TSTEP keyword through
base.CreateEntity() and base.SetEntityCardValues(). An Example is shown below:
ANSA-74033
NVH Console
General New indication, if a component has modified modes in Diagram view and Loadcase
manager.
ANSA-75461
DOE The capability to run DOE studies for Bush connectors from within NVHC is added.
The Bush connectors that should be used for the study are selected from a list that
pops up and then experiments for different values of the bush properties are created
by the tool based on the sampling algorithm that is selected. Finally, the job is
submitted and in the end a _.metadb_ file with the DOE results is being created.
ANSA-80070
The option "BSR" (Bush Series Reduction) is added when running DOE for selected
bush connectors from within NVH Console. If this option is used, the whole assembly
is reduced to a matrix of Transfer Functions (FRF representation) which are necessary
to perform the DOE study. That provides a very significant performance increase for
the DOE study of the whole assembly.
ANSA-79780
LS-DYNA
General INITIAL STRESS SECTION
IZSHEAR is now supported; it gets output when the Output Format is set to R971R10
(or later).
BCS-2071
ANSA-53511
ANSA-76403
Output In case entity's name does not exist, '_TITLE' extension is not output for
*DEFINE_COORDINATE and *HOURGLASS keywords.
BCS-1009
ANSA-81451
For *MAT_240, the fields LCG1C and LCG2C have been supported for R9 and on.
BCS-2309
BCS-2330
BCS-1054
BCS-1252
Materials The keyword of the below materials has been changed, so as to be in full accordance
with the solver:
MAT200 MAT_SPRING_ELASTIC -> MAT_S01 MAT_SPRING_ELASTIC
MAT201 MAT_DAMPER_VISCOUS -> MAT_S02 MAT_DAMPER_VISCOUS
MAT202 MAT_SPRING_ELASTOPLASTIC -> MAT_S03
MAT_SPRING_ELASTOPLASTIC
MAT203 MAT_SPRING_NONLINEAR_ELASTIC -> MAT_S04
MAT_SPRING_NONLINEAR_ELASTIC
MAT204 MAT_DAMPER_NONLINEAR_VISCOUS -> MAT_S05
MAT_DAMPER_NONLINEAR_VISCOUS
MAT205 MAT_SPRING_GENERAL_NONLINEAR -> MAT_S06
MAT_SPRING_GENERAL_NONLINEAR
MAT206 MAT_SPRING_MAXWELL -> MAT_S07 MAT_SPRING_MAXWELL
MAT207 MAT_SPRING_INELASTIC -> MAT_S08 MAT_SPRING_INELASTIC
ANSA-75066
Negative values of IDAM field are now supported in the *MAT_ADD_EROSION card
in order to utilize multiple DIEMs.
ANSA-64614, ANSA-75580
Negative values of IDAM field are now supported in the *MAT_ADD_EROSION card
in order to utilize multiple DIEMs.
BCS-641
'Material curves quality criteria' option has been added for curves used in material
definitions, in order to control max limits for yield stress, plastic strain, scale factor
and strain rate.
ANSA-48921
Contacts
Rigid structures attached to tied segments are now identified in case of offset-type
tied contacts.
46459, ANSA-29109
CON- PLANE
STRAINED
The keyword *CONSTRAINED_LOCAL is now supported.
BOUNDARY DFLUX
ANSA-43768
AUXILIARIES BOX
The local coordinate system can now be defined by axis or by cord through the
"defined by" pull down menu of the *DEFINE_BOX card. Minimum and maximum
values are defined in local system whether axis or cord option is selected.
BCS-556
CONTACT
ANSA-54687
CONTROL
ANSA-52273
CONTROL [CONTROLs]
BCS-2403
MassOnAllNodes KEYWORD has been introduced, in order to control the final result
of the ELEMENT_MASS card.
ANSA-75353
AUXILIARIES RIGIDWALL
The fields NSEGS, VL and HEIGHT are now supported for the
*RIGIDWALL_GEOMETRIC.
ANSA-78163
TRANSFRM
The A_PARAMETER assignment via F3 is now supported for the fields of the
*DEFINE_TRANSFORMATION keyword.
ANSA-66509
ANSA-62753
ANSA-55023
The FLAG field of the local coordinate system created by GEB_ORs with
SectionForces representation is now able to be controlled directly by the GEB_OR
entity, via the new "coord_flag" field of the GEB_OR card.
ANSA-71250
ICFD menu may be activated after enabling the new Settings> Decks [Enable
LS_DYNA ICFD] setting.
42316, ANSA-26479
A new ICFD group is now introduced. It may be activated after enabling the new
Settings> Decks [Enable LS_DYNA ICFD] setting.
ANSA-77249
PAM-CRASH
Input PAM-CRASH solver python module affecting PYVAR epyDisplayErrorMessage,
epyValueDim, epySolverVersion, is now supported.
BCS-2545
The check now reports an error, when the Projection Node IDNOD is shared by an
other mesh element or a kinematic constraint or a boundary condition.
ANSA-75645
New option enables the writing of the PENTA6 elements as SOLID during output.
ANSA-64959
BCS-1913
AUXILIARIES RES.MAP
ANSA-74843
The '3 Points Transformation' is now supported in Align Mesh tab, allowing keyword
output for solver mapping.
BCS-1966
Abaqus
General RADIATION CAVITY
ANSA-76710
Input When reading a *COUPLING with REF NODE = [NSET], new COUPLINGs will be
created with masters the nodes contained in NSET.
BCS-811
Input When ELSET and NSET with the same name are input, a warning is written in the
ANSA_Input.log.
63031, BCS-1130
Output Unused sets of solidfacets/edges are now written as *SURFACE during output.
58119, BCS-1122
A new flag has been added at ANSA defaults, in order to control the application of
unreferenced Abaqus Distributions.
ANSA-80198
ANSA-68966
When converting continuum shells to shells and having the option: "Delete
C.Shells elements" active, the IDs of new generated continuum shells are copied
from the initial shells.
BCS-2023
BCS-812
ANSA-61486
CONTACT [CONTACT]
BCS-2146
STEP
BCS-1258
BCS-1581
*LOAD CASE keyword under perturbation step is now supported through the 'New
*LOAD CASE' option of the context menu of a STEP.
61554, ANSA-39626
LC/A Point connectivity options are no longer available for CONTACT, ELEMENT
and ENERGY Output Requests.
ANSA-80657
Line elements are now colored according to the Stress initial condition that is
assigned to them.
ANSA-81678
Scripting New python methods for *LOAD CASE in Loadcase.abaqus class are now
supported:
Loadcase.abaqus.new_loadcase()
Loadcase.abaqus.delete_loadcase()
Loadcase.abaqus.get_loadcases()
ANSA-76049
RADIOSS
Input Character limit for #include keyword has been increased to 500.
BCS-999
BCS-1907
ANSA-77164
AUXILIARIES CONTROL
ANSA-73746
FAIL
CHANG method has been added, describing the Chang failure model.
BCS-2099
INTERFC
BCS-976
For RADIOSS 2017 and /INTER/TYPE19, the value 3 in Igap field is now
supported.
BCS-1615
/INTER/TYPE11
Idel: 3, 1000
iform: 0
inacti: 1000
/INTER/TYPE19
Igap: 1000
Ibag: 2
Idel: 3, 1000
Inacti: 1000
Iform: 0
ANSA-80043
AUXILIARIES LAMINATE
Note that Input of /PROP/TYPE11 and /PROP/TYPE16 with such information will
be listed under the PROPERTY LAMINATE list in the Database browser.
Also, Output for all properties is for angle unit in degrees (Iunit=1).
ANSA-54195
MONVOL
For RADIOSS 2017, the Finite volume meshing parameter fields of kmesh and
Tswitch are now supported.
BCS-2480
SAFETY Seatbelt
Fields for 'Load time' and connecting SPRINGs of type 4 have been added within
'Properties...' pop-up window.
ANSA-76727
ANSA-62807
ANSYS
General COMBI250
ANSA-77977
ANSA-59232
Output Shell elements that use a (non layered) property, the material id that this property
refer will not be written during output in shell section definition (SECDATA), if this
material is undefined.
BCS-1884
The Option "Orient Beam Using 3rd Node" has been added also in the default
settings. Thus, the user-defined default option is now able to be saved in the
ANSA.defaults file.
BCS-2633
BCS-469
It is now possible for Contact Type = PILOT NODE to select geometry POINT entity
for the definition of the Pilot Node and automatically the respective NODE entity will
be created
BCS-1745
PERMAS
AUXILIARIES RES.MAP
ANSA-76478
ANSA-77785
OpenFOAM
Input/ Output "Binary I/O with 64 bit integers" flag has been added.
ANSA-81240
TAITherm
General ANSA now interfaces with MSC Material Center for Taitherm solver materials.
ANSA-80181
ANSA-61711
ELEMENTs INFO
Increase of the upper limit of ids numbering for grids, shells and polygons has been
implemented.
BCS-2535
OPTISTRUCT
General PBUSH
In the Ki (Nominal stiffness values) fields, "RIGID" can now be set as acceptable
value.
ANSA-77136
Properties PBUSH
In the Ki (Nominal stiffness values) fields, "RIGID" can now be set as acceptable
value.
ANSA-55752
DM Optistruct file type is now supported for saving of parts/subsystems in the DM.
ANSA-76756
CROSS SECTION
Output The Cross Section Tool can now output PBxSECT properties from cross sections
that contain pasted cross section curves.
ANSA-81200
New function Collapse, converts Pasted cross section curves to a single curve,
combining their properties to a new one.
ANSA-81200
Scripting base.CrossSectionAutoSpotAll
The AutoSpot [All] function can run through script. A specific value is returned,
indicating the successful creation of cross spots.
ANSA-80718
Scripting base.GetCrossSpotConnectedCurves()
New function has been added that takes as input a cross spot and returns a list of the
connected cross curves.
ANSA-80945
KINETICS
Input/ Output MotionSolve solver files (.xml) are now supported.
38169, ANSA-23646
Bodies Flex
New column has been added in the Modal ICs tab of the Flex Properties window that
indicates which particular modes have the biggest contribution on the dynamic
behaviour of a flex body.
ANSA-70113
ADAMS Input has been enhanced and the definition of flex bodies through matrices
(.mtx files) is now supported.
ANSA-67777
Tire
Improved interface for tire bodies now allows definition of multiple tires
simultaneously.
ANSA-77601
FE entities that are incompatible to Epilysis/Nastran solution are now identified and
deactivated by default.
ANSA-79789
Flex Builder's output will now allow writing out NASTRAN files with ANSA comments
by default.
ANSA-79327
Mech
ANSA-76697
The new graphical representation of models can now show the connectivity of bodies
including their connectors as a schematic diagram.
ANSA-80629
Simulation Configurator
The Step and Total values can now be assigned with an A_PARAMETER or
KIN_DESIGN_VARIABLE entity through "Articulate> By Actuator Joint" of Kinetic
Configurations' context menu or through "Move Joint" of Kinetic Joints' context menu.
ANSA-73286
Results
ANSA-76897
New Quick Plot button added within Results Viewer; once activated, it will clear
existing plots and add a new one as long as a result characteristic is selected from
the respective list. When this option is enabled, the Add and Remove buttons
become disabled.
ANSA-78653
Simulator
New option has been added under General tab of Simulator settings window,
allowing to choose the Cosin HTire solver to be used when running simulations with
tires of Pacejka formulation.
ANSA-77570
Scripting kinetics.GetArticulationHistoryFromConfig()
New function has been added to obtain the configurations' articulation history.
ANSA-76019
MORPH
Controls Deform Map
ANSA-79444
New option in DEF MAP function, called 'Save as DVGrids', is now available to allow
the use of current deformations in consequent applications.
ANSA-79423
HEXA BLOCK
Boxes Convert
ANSA-77560
ANSA-49111
OPTIMIZATION
Optimization DataBase Save action, performed whilst the Optimisation tool is open, will now
Tool consider and preserve the current condition of the DOE matrix.
ANSA-81347
DOE setup
ANSA-61316
Task Manager
General Shell script input, apart from plain executables, in now also supported in the
"Executable" field of the optimization task's run options.
ANSA-79998
Scripting
base.AddToAnnotation()
BCS-923
base.CalculateHardeningParameters()
It is now able to calculate hardening parameters (K and n) from stress/strain data through scripting.
BCS-2283
base.CollectEntities()
ANSA-81422
base.SetEntityCardValues()
A debug option in the form of an argument has been added in this function that returns a tuple with an
integer that values 0 on success or non zero on error, as well as a dictionary that holds any
errors/warnings found.
BCS-2819
base.TranslatePart()
base.TransformPart()
base.SymmetryPart()
base.ScalePart()
base.RotatePart()
base.MirrorPartPoint()
base.MirrorPartPlane()
base.MirrorPartAxis()
base.GeoTranslate()
base.GeoTransform()
base.GeoSymmetry()
base.GeoScale()
base.GeoRotate()
base.GeoMirrorPoint()
base.GeoMirrorPlane()
base.GeoMirrorAxis()
The "group_offset" argument is now enhanced with the "Current Part" and "Existing Part" options and
the "pid_offset" with the "Current Property" option.
ANSA-78720
base.MeanFieldHomogenizationMakeMaterial()
base.MeanFieldHomogenization()
New script functions have been added to perform homogenization of multiphase materials and create
appropriate material entity for each deck.
ANSA-82276
base.MergeAnsaModels()
A new function is now available to support the merging of two ANSA Models already loaded in the
ANSA session.
BCS-333
guitk.BCLineEditSetEditingFinishedFunction
A new function is now available, which enables a callback function definition, which will be triggered
when editing of a BCLineEdit is finished.
Editing of a BCLineEdit is considered as finished when pressing the Return or Enter key, or when the
BCLineEdit loses focus.
ANSA-79464
Scripts Collection
FemsiteMaxElemsPerNode.py
A new check has been added for NASTRAN deck to check the maximum number of elements that
connect to a single node, for a FEMSITE analysis. The check flags any node that violates the user-
defined max number of elements criterion.
BCS-2046
BCS-2041
Nodes would not be able to be picked through transparent unmeshed geometry for
ANSA v17, v18 and v19.0.x.
ANSA-71228, ANSA-62861
Entity Card fields with values more than 9 digits would not be shown properly.
BCS-2059
BCS-2392
Pick mode would not be available for Parts in Database Browser through their
assigned connection entities.
The same also applied to base.PickEntities() script function, unable to identify
ANSAPARTs, where the connection entities were assigned to.
BCS-628
Input MEDINA
Boundary sets containing Solid faces would not be labeled as Surface Sets for
ABAQUS and PERMAS.
ANSA-78610
Incorrect expansion of range sets when deactivating the flag 'Keep MEDINA Range
Sets'.
ANSA-77273
BCS-1531
When "Show only used with Name" and "Show only used with Field 10" flags were
active, application of "Show"/"Show Only" context menu option on Includes
(through Lists> Includes) would result in erroneous display of all grids, ignoring the
activated flags.
58577, ANSA-37506
Transform [Copy]
BCS-1036
When modifying the content of a SET, the initial entity type selection would not be
determined by the SET content.
ANSA-76414
Models
Double click on a Model's Visible column would not Show Only the selected model.
BCS-1961
Scripting base.TransformPart()
PID auto offset option would not work, when applying the function.
ANSA-52698
BCS-866
Import Translators NX
When opening specific NX files with the use of the NXOpen library no geometry
would be transferred in ANSA.
ANSA-79445
Several CATIA attributes would not be transferred, when opening a 3dxml file in
ANSA.
ANSA-64228
The location path of points and curves under geometric sets would not be
transferred to the Comment field of their cards in ANSA, when opening a 3dxml file
with the "Read features" option enabled.
ANSA-54794
BCS-2345
After the CAD translation, the CAD attributes of outermost entities would be empty.
ANSA-61008
Translators STEP
Toroidal surfaces of an imported *.stp file would have negative radius causing
missing faces.
BCS-1075
Corrupted database with toroidal surfaces would be created during input, which could
lead to erroneous behavior or unexpected termination during Output.
ANSA-80589
GUI
General Occasionally while in a function, the operations to rotate and zoom the model would
not be available.
BCS-1014
BCS-1651
The working window would sometimes become inactive (no focus), after a function
was finished.
ANSA-68298
Unexpected termination could occur when using the filter to search for xml entries.
BCS-1559
Model Browser
General When selecting a part or group from GL area with 'Identify' while being in 'Icon' view
mode it would switch to 'tree' view mode.
Slow opening of Groups in Model Browser would occur when viewed in Icon mode.
63793, ANSA-41234
ANSA-76404
The entity cards of model browser entities (e.g. Subsystems, Simulation Models)
would be missing all the secondary attributes.
ANSA-62362
ANSA-80357
Output Duplicate connector elements would be written out in a simulation run. The problem
would occur if connector elements were created by ANSA Connector Entities that
were loaded in the ANSA session and were assigned to the Simulation Model, while
the same connecting elements already existed within connecting subsystems of this
Simulation Model.
ANSA-79087
ANSA-79617
Parts/ Groups Show/ Show only actions on Parts/ Groups would change the hidden status of
entities.
ANSA-77421
When a slot was selected in Subsystem's Graph view the full Subsystem contents
would appear in the Contents tab. Now, only the corresponding Assembly Points
appear in Contents tab.
ANSA-77577
The graph view would not be correct in cases where a connecting Subsystem
connected more than two Subsystems.
ANSA-77576
When a Subsystem created from disk was loaded its content would be erroneously
added to the GEOMETRY_OUT_OF_SUBSYSTEMS container.
ANSA-73790, ANSA-60325
ANSA-56663
ANSA-73789
If a parameter was used without being defined while saving an ANSA file in DM an
undefined *PARAMETER would be created, having a default value. This
*PARAMETER would not be written out during output.
BCS-1851
Simulation Outputting a Simulation Run for Abaqus deck, the STEP keywords would not be
Runs written at the end of the output file.
ANSA-71337
ANSA-79648
DM Update Status
ANSA-75795
Configurations When a configuration was activated and entities related to deactivated configurations
were detected, it was possible to select and activate another Configuration without
finalizing the handling of such entities.
ANSA-64150
Configurations Upon the activation of the configuration, the connections referencing a PID used by
an inactive Part would be errouneously deactivated.
ANSA-69886
The check function can now also report shells and solids that are FE-representations
of connections and are initially placed under a different Model Browser Container
than their connection entity.
ANSA-80056
DM Replace
Internal GEBs and connectors were not deleted during change representation.
BCS-1660
When the attributes of the Simulation Model were updated during "Replace" or
"Replace metadata" from the DM tab Loadcases associated with these Simulation
Models (through Simulation Runs) would not get updated, although they had
attributes that, according to the dm_structure.xml, originate from Simulation Model
attributes via rules.
ANSA-77181
ANSA-65160
During Part replacement, affected connections, which were not previously applied,
would be realized.
ANSA-82092
Function would be available only for the master part, in case of multi-instancies.
BCS-1662
The available options of the DM drop down menu would not be synchronized with the
available options in the context menu, in case of selecting adapter items (eg. a
Subsystem under a Simulation Model).
ANSA-73172
ANSA-78086
Identify When the model was on Icon view the Identify action would turn the view mode to list
view.
ANSA-55352
Scripting base.ReplacePart()
Upon the replacement of parts through script, the PIDs would not be updated
properly.
ANSA-67726
Compare
General Unexpected termination would occur, when trying to paste the path of the files to
compare in the Wizard.
BCS-2409
Upon the comparison of two single-part models their parts would not be matched.
ANSA-63154
Models would be read anew in comparison scenario, when going one step back and
then forward again.
BCS-1595
Data Management
General When a Simulation Model was loaded from DM its original contents would remain in
the database.
ANSA-78748
META viewer in Product Tree Editor would show the selected part/ group with
distorted geometry, in case of 3dxml reference files.
BCS-2308
Input Input Deck File of very large path would fail, when connected to a web based DM
path.
ANSA-81027
Groups Save in DM
ANSA-73495
Subsystems When a Subsystem was loaded from DM, it would automatically pull Materials and
Properties used by its contents, even if these Materials and Properties were assigned
to a different model container.
ANSA-81205
Check DM Updates for Parts would not be functional, when connected to SPDRM.
ANSA-69147
Unexpected termination would occur when opening the DM Browser after saving in
DM an Include from the Includes list.
BCS-1612
When a Subsystem was saved in DM with ANSA file type the quality of the image
preview displayed in the DM browser would be low.
BCS-1812
The comment of a subsystem of any solver type would not be saved in DM.
BCS-1012
Upon the display of parts with many attributes in the DM Browser window, a
significant delay would occur.
ANSA-49568
ANSA-78668
ANSA-67920
ANSA-64517
Scripting base.AddFileInDM()
The function would fail to add an ANSA database for Parts in DM, when the "File
Type" property value was set equal to "ANSA".
BCS-1456
dm.GetLibraryItemTypes()
New script function has been added to collect all available types of rich library items
found in the data model.
ANSA-80252
52022, ANSA-32867
BCS-1804
BCS-2831
ANSA would not always write the same order and grouping of connections, when
exporting the same XML file.
BCS-1377
Connections would be detected as double, although their distance was greater than
the defined "spot distance" value.
ANSA-69185
Spotwelds/ A connection that had the 'Avoid Feature Lines' FE representation setting disabled
Spotweld would unexpectedly fail to realize, in case it was in the proximity of a geometrical
Lines/ perimeter.
GumDrops
BCS-1695
Spotwelds Spotweld would loose its status, when the nodes of the FE-Representation were
moved.
BCS-1738
BCS-3005
GEBs Randomly erroneous results would occur in user defined area of GEBs, when
creating multiple user defined areas on second order elements.
ANSA-82863
Seamwelds Closed seamwelds with FE Rep Type RBE2 and "Force Node To Node" option active
would create duplicate RBE2 elements, causing dependency errors.
ANSA-79994
53963, ANSA-34222
When manipulating the mesh of connectivity parts the "OK" connection status would
be lost.
23533, ANSA-13951
Connectors A connector would unexpectedly fail to realize, in case of 'Constrained Rigid Body'
representation and 'Node' search patterns.
ANSA-77143
ANSA-80018
When a Connector was realized on Assembly Points, which were assigned 'Output
with Subsystems' : 'No', the Ids of the central nodes of the interface elements would
not be maintained.
ANSA-77801
ANSA-80613
A POINTs/ LC Numbering Rule of Subsystem would be forced, even if entity had special numbering
POINTs rule.
Now, any numbering rule defined in the edit card of an A_POINT/LC_POINT prevails
over any numbering rule of the A_POINT/LC_POINT container. This means that even
if the special numbering rule for the node marked by an A_POINT/LC_POINT sets an
id that is out of the target numbering range ot the subsystem where this
A_POINT/LC_POINT belongs to, the special id will finally be respected.
ANSA-79846
Assembly The numbering rules inside the Assembly point entity card would not be applied to
Points the interface node, in case that the interface node already existed and the Assembly
point created interface elements.
ANSA-77589
The specified rigid patch material Id, in case of an Assembly Point with 'Rigid Patch'
interface, would not be saved in the ansa database.
ANSA-76537
Interface Sets The label of sets marked as interface sets would not be exported in the ANSA
comments and, thus, not maintained after output/ input of Subsystems.
ANSA-68103
BCS-1408
Realize
upon manual creation of Connection and realization one by one CONTACTs would
be created redundantly and lead to the creation of double/triple CONTACTs, which
was an error in LS-DYNA.
BCS-2476
Single contact option in FE Rep. Settings would not merge existing contacts that
were created through Convert [FE to Connection Points].
BCS-1783
Status of applied connection entities would be lost, after updating property card of
adjacent elements.
ANSA-68306
The Segments written out when outputting a model with Hexa-Contact connections in
PAMCRASH deck would not belong to the connection after re-inputting the file.
Therefore, applying Erase FE these segments would erroneously remain in the
database.
33288, ANSA-20487
Template Performance issues would occur, when opening databases with many connection
templates and connection rules.
ANSA-82144
Define Holes
Connection
In case of blind Tubes, the generated Bolts would be assigned an erroneous
"User/Bolt Hole Type" attribute value.
BCS-1997
Solids with big ratio height to width would be converted to Adhesive Faces with
erroneous orientation.
ANSA-79777
FE to Adhesive
BCS-1753
BCS-1757
BCS-940
FE to Cnctn Pts
ANSA-79068
Realizing connection after applying the function would create new contacts instead of
using the existing ones.
BCS-1081
BCS-1346
Scripting connections.FindDuplicateConnections()
The function would not return correct results, in accordance with the distance
argument provided.
BCS-2688
FE Representations
BEAM BOLT The thickness of the Shells of the Bolt head and nut would not be considered during
realization on solid parts. Therefore, realization on solid parts would result in property
thickness penetration.
BCS-1990
Upon realization of a bolt connection entity on tubes that consist of geometry mesh,
the specified Tube Feature Line Angle Limit value would be ignored.
64681, ANSA-73081
BOLT NULL The interface elements of the bolt were not attached to the null shells. They would
SHELL erroneously be attached on the shells of the connected parts.
ANSA-78889
Upon realization, the nodes of the generated Null Shell elements would be placed in
the out of Subsystems container.
ANSA-81972
BOLT ON Upon realization, a BOLT ON SOLID would fail to attach to the chamfered segment
SOLID of a solid tube, although the specified "Tube Feature Line Angle Limit" was greater
than the angle of the chamfer.
BCS-2090
Y-JOINT- Unexpected termination would occur when the Connection Manager was re-launched
SHELL/ Y- after a modification of one of the following seamline FE Representation settings:
JOINT- -Zone width
FEMFAT/ T- -Offset row width
JOINT- -Weld thickness
SHELL- -Weld width
CLOSED/ T-
JOINT-
SHELL/
OVERLAP-
SHELL-
CLOSED/
OVERLAP-
SHELL/
LASER-
WELD-
SHELL-
CLOSED/
LASER-
WELD-
SHELL/
LASER-
WELD-
FEMFAT/
EDGE-WELD-
SHELL/
EDGE-WELD-
FEMDAT/
CRIMP-
WELD-
SHELL/
CRIMP-
WELD-
FEMFAT ANSA-81937
CRIMP- Upon realization, the specified value for the width of the offside 2nd zone on the
WELD-SHELL secondary sheet would not be respected.
ANSA-79703
Y-JOINT- A combination of zero width and 'root shells' equal to 'Primary Row' would lead to
SHELL/ unexpected realization failure.
OVERLAP-
SHELL/
CRIMP-
WELD-SHELL ANSA-82305
Y-JOINT- Occasionally, when "Step Length" option was left blank and [Loose ends] not active,
SHELL/ Y- the average element length would be miscalculated.
JOINT-
FEMFAT/ T-
JOINT-
SHELL-
DOUBLE-
CLOSED/ T-
JOINT-
SHELL-
CLOSED/
OVERLAP-
SHELL-
CLOSED/
OVERLAP-
SHELL/
OVERLAP-
FEMFAT/
EDGE-WELD-
SHELL/
EDGE-WELD-
FEMFAT BCS-1955
LASER- The seamline FE Representation settings would not be exported correctly during
WELD- File> Output, in case that the 'SheetToe Zone2 Width' field was blank.
SHELL/ As a result, the seamline FE Representation settings would not be read during File>
EDGE-WELD- Input.
SHELL
ANSA-79831
LASER- Upon realization, the actual width of the weld would be twice the specified value in
WELD- the 'Width' field of the FE Representation settings.
SHELL-
CLOSED ANSA-79723
RBE3-SHEL- Erroneous weld direction would appear in small welds (up to 3 edges covered feature
RBE3 line).
ANSA-80227
ANSA-80237
SOLID-WELD Unexpected termination would occur when realization (with errors) was performed in
no GUI mode.
ANSA-78103
Y-JOINT- Erroneous treatment of Y-JOINT with height and "keep adjusted shells" option would
SHELL lead to realization failure. The option is now supported for any height value.
ANSA-80063
Topo
Faces Flange [Compatible]
ANSA-67555
BCS-1635
Mid.Surface [Casting]
BCS-898
When 'Connect weldings with thickness ratio' option was activated perimeters on PID
boundaries would be erroneously joined.
ANSA-82662
ANSA-64208
Focus Not
Using the function with PID Region at Topo module could lead to unexpected
termination if a Cross Hatch was selected.
ANSA-77474
Shell Mesh
Tools Settings [ANSA defaults]
ANSA would lead to unexpected termination, if ANSA defaults file was loaded with
the keyword entities_reference_library_path.
ANSA-79104
In certain cases, criterion would give different number of off elements each time it
was used.
ANSA-79674
Function would not work with Reconstruct option, when "Freeze>Perimeters" flag
was enabled in Mesh Parameters. The same has been fixed for Hot Points>Delete.
ANSA-76685
Mesh STL
Generation
Extreme cases where quads would be generated when element type was set to Tria.
BCS-2000
Applying the function in ANSA v19 would move the grids away from the perimeter,
exceeding the maximum distance limits set in the Mesh Parameters.
BCS-2585
If the reconstructed area had entities that need mapping after reconstruct (forces,
pressures etc.) results mapper would run for temperatures as well.
BCS-2061
Elements Vol.Mesh
Function on second order solids would produce first order shells, in case of ANSYS
properties.
55531, ANSA-35334
Scripting base.CollectEntities()
Wrong shell elements would be returned, when a geometrical feature was used as a
container.
ANSA-80720
mesh.UnmeshedMacros()
Occassionally, when the function was finished some CONs would remain highlighted,
followed by unexpected termination when another function was called after that.
64541, ANSA-41784
Volume Mesh
Utilities Isolate [Short Path [Leaks]]
BCS-2377
BCS-2522
Tetra Rapid
Tetra FEM
The number of violating elements and elements with negative volume has been
significantly reduced. This applies on 2nd order elements.
ANSA-76434
Structured Extrude
Mesh
Applying offset on both sides of a shell mesh would erroneously produce duplicated
elements.
BCS-2070
Structured Layers
Mesh
Unexpected termination would occur, when layers area was defined from empty
Properties or Parts.
(Accessible also through MESH> Volumes> Layers [Create]).
ANSA-81181
ANSA-80726
Layers growing from different areas with different number of absolute height and
additional outer layers in aspect mode would not be generated with correct heights.
(Accessible also through MESH> Volumes> Layers [Create]).
ANSA-79843
Last aspect ratio of additional outer layers would be underestimated. Now, in order to
achieve the equivalent result, the default value has been changed from 0.6 to 0.45.
(Accessible also through MESH> Volumes> Layers [Create]).
65137, ANSA-42194
30220, ANSA-18448
Improve Smooth
Solid elements PID bounds would not be respected when applying the function.
BCS-2217
Scripting mesh.CreateShellsOnSolidsPidSkin()
Unexpected termination would occur, when an empty list was given as input.
ANSA-81097
Batch Meshing
General Unexpected termination could occur in Batch Mesh, when some macros were frozen.
BCS-2120
ANSA-80978
Mesh treatment for Fillet row number would not always be respected.
ANSA-65885
Volume Mesh Fix Quality Parameters would not be read, in case database was prior to v18.0.0.
ANSA-82896
Statistics report would erroneous show a 'check mark' even if 0 off elements existed.
BCS-1548
DECKs
Input/ Output ANSA would report no error message in case of input interruption. A relevant
message is now reported both in the Info and File Input Analytics Window.
ANSA-55806
Output The comment of the Include would not be written out, when outputting the include
from the Includes List.
BCS-2344
Occasionally, fix operation would not work when a property was selected to be
frozen.
BCS-409
The initial attributes of the source sets (e.g. Output Type etc.) would not be
transferred to the copied sets (default values were assigned), when Transformation
Options for 'Set' were set to 'Copy/Expand'.
BCS-1453
Lists Includes
ANSA-82355
Applying the function on two or more line elements that share the same property
would lead to unexpected termination.
ANSA-81679
AUXILIARIES CURVE
The 'Add plot' functionality through the context menu list of a *DEFINE_TABLE entity
would not work.
ANSA-71354
GEB
Unexpected termination would occur upon opening a database created before 13.1.0
when containing GEB entities.
ANSA-80016
INV.FORMING
BCS-1668
The F1 select from drawing area functionality would not be supported for the
definition of the stamping direction vector in the Workpiece tab.
BCS-1479
RES.MAP
Res Mapper, using the Homogenization option for MOLDFLOW results, would not
give any result, when working on Windows OS.
Now, this mapping can properly work using the converted xml to encode UTF-8.
BCS-2151
When RESULTS MAPPER entity was moved through Utilities> Transform [Move], the
mapped data would be lost.
BCS-1393
BCS-1664
CFD DECKs
CGNS Input/ Output
CGNS files that contained both NGON and other section types in the same zone
would not be imported.
ANSA-82125
Laminates
LIST Generate Report
The drawing of the Pcomp zones on faces would be erroneous, when the Laminate
was defined on geometry.
BCS-2351
Tools
Checks Connectivity
The calculation applied in cases of tied contacts where the master set is allowed to
have elements which their nodes belong to the slave set, would be erroneously
applied on complete model resulting in low performance for PAM-CRASH and
ABAQUS.
ANSA-76466
Penetration [Intersections]
De-penetration action would not take place, either when frozen entities existed or
when an entity was selected to Freeze.
ANSA-76011, BCS-1547
xLINKs [PLINKs]
Error instead of warning would appear, in case NLAYR field was empty or had a
value higher than the actual.
BCS-2196
Includes The Include card fields would be ignored, when a file was loaded.
Manager
ANSA-64239
New curve entities created inside their list window would not respect the specific
settings option.
BCS-1484
Plugins
General Adding a new plugin in an existing Plugin Folder would not automatically load it in
ANSA.
ANSA-78077
Safety
Dummy Articulation
For PAM-CRASH dummy models and output of Generator session files, non zero
values would be erroneously output for axes with no articulation.
BCS-1935
SeatBelt The Reference context menu functionality would not work for entities used by a
Seatbelt entity.
ANSA-80558
ANSA-77257
Pedestrian For the CNCAP protocol, the Bumper Corner Target points would get a 25mm offset
on the y axis.
BCS-2153
Erroneous creation of curve for calculating the minimum horizontal angle for B-Pillars
would occur.
BCS-2335
Erroneous initial headform position data would make the FMH 'dissapear' when the
'Reset' button was pressed.
ANSA-77287
Raster The "Paste Tolerance" would not be applied on the area of the FRONT curve.
ANSA-72107
NASTRAN
General FSPD field value of the FREQ4 card would not be stored in ANSA Database.
ANSA-79094
ANSA-77613
ELEMENTs CBUSH
BCS-1371
For Kinematic Connections of type "User defined" the direction settings would not be
inherited properly in the respective created CONNECTOR_ENTITY card. When the
database was saved and reopened default values would appear in the direction fields
(X-TRA Type, Y-TRA Type, etc) of the CONNECTOR_ENTITY.
BCS-1938
For Kinematic Connections of all types except "User defined", "Clamp" and "Spheric",
the direction settings would not be inherited properly in the respective created
CONNECTOR_ENTITY card. The direction would be always X regardless Y or Z
defined initially.
ANSA-82524
RSSCON
The RSSCON element would change its TYPE to GRID, if any of its referenced
elements was deleted. Now, the RSSCON is deleted, when deleting any referenced
element.
BCS-1645
BCS-1645
Incorrect message in the "Message board" at the Action step would appear, when the
*ELEMENT_MASS entities were hidden from the Database Browser.
ANSA-77092
BCs ACMODL
The card would be output with empty INFOR field instead of ALL, when METHOD
was CP and INTER=IDENT.
BCS-922
ANSA-76579
PRTENS [INFO]
44424, ANSA-76999
AUXILIARIES SET
When a SET keyword was found after the header section, it would be erroneously
read as an Optistruct SET.
ANSA-80130
LS-DYNA
Input Erroneous merging of *Control entities that belonged in separate *Include files.
BCS-2244
Confusing messages of ignored columns for material fields with 0 values would
appear.
BCS-874, BCS-2113
BCS-1162
Abnormal termination would occur, when importing an LS-DYNA file with beam
elements that lack section information.
BCS-2320
BCS-2910
Output Includes
ANSA-69767
BCS-2333
BCS-2332
Output When a SET had its 'COLLECT OPTION' set to 'YES' and was empty, the 'COLLECT
OPTION' would not be kept in Output. Moreover, the other SETs, which had
'COLLECT OPTION' set to 'YES', would not be written as Collect Sets.
BCS-1442
The check would fail to read all the information from the "messag" file.
BCS-1709
BCS-2629, BCS-1585
Material DB [List]
The value of a parameter would not be extracted to the corresponding field during
read.
BCS-2281
BCS-2416
BCS-1583
AUXILIARIES CONTACT
BCS-2288
BCS-1556
TRANSFRM
BCS-2106
PAM-CRASH
Input BAGIN
If a wrong keyword existed between supported keywords for Vent Hole definition, the
reading would stop and would not read the rest of Vent Hole definitions.
BCS-1918
Reading would be ended, when an unknown keyword existed under the FPM sub-
keyword.
BCS-1913
The INDND of the OTMCO / would not get updated, when the node ID got offset due
to conflict resolution.
ANSA-77486
BCS-2917
BCS-1919
The Pretension Assistant would assign wrong vector definition in the generated
GEB_BC.
ANSA-82377
DAMP
During input, ANSA failed to read correclty the curve ID assigned in the IFUN field of
the DAMP card.
BCS-2446
Safety Dummy
When reading GNS ses files, '!' would be considered a comment character.
Moreover, ROT_LIMIT keywords would not be read from pos files.
BCS-1049
The output and input of Generator ses files would use relative to initial rotations
instead of total values for both the dummy and seat joints.
BCS-998
ANSA-77536
Abaqus
Input *PARAMETER
ANSA-78063
BCS-2588
ANSA-80670
SDV output request would have erroneous definition during Input/ Output.
BCS-2364
Simulation run output would lead to writing the STEP keywords in wrong position
(beginning instead of the end) in the main file (.inp), leading the solver to fail.
ANSA-80745
Importing DLOAD applied on solid facet would report false positive error (DLOAD
BEAM error) in the input log.
BCS-2572
Quality Criteria
The absence of STEP MANAGER would lead to erroneously calculated 'crash time
step' criterion.
BCS-1600
Lists Properties
Orientation distribution tables were not written when a membrane section (TYPE:
M3D_) was assigned to shell elements oriented by angle, unless an Orientation
Offset to Nodes CS was used in the properties ORIENT field.
BCS-1073
ANSA-80147
COORDs NODE
ANSA-80153
LOADs DLOAD
When a DLOAD was applied to an empty set a DLOAD keyword would be written
during output with no data line.
ANSA-77860
INIT.CONDIT. INIT.COND. [Volume Fraction]
ANSA-77144
AUXILIARIES CONTACT
When changing a Contact Pair from Master/Slave to Master/All, the slave set would
remain connected to the Contact Pair.
BCS-1106
CONTACT [Assistant]
The element master and node slave types would be inverted, when flipping Contact
Pairs.
BCS-1710
INV.FORMING
The variable dependencies of yield stress and plastic strain with blank temperature in
a *PLASTIC material model could not be used for the calculation of Hardening K and
n fields from the 'Calculate K,n' button at the Material tab.
BCS-1234
The Pretension Assistant would assign wrong vector definition in the generated
GEB_BC.
ANSA-80738
ANSA-77529
RADIOSS
General TH_GAUGE and TH_FRAME entities could not be placed within an INCLUDE.
BCS-1474
BCS-1372
ANSA-80059
Input Input of /PROP/TYPE14 would result in confusing message of missing the Sol2SPH
options.
BCS-2439
Invalid assignment of offset IDs during 'Merge model with current model' Model
Action in order to resolve conflicts for node references in /MONVOL/AIRBAG1 and
/MONVOL/COMMU1 and material reference in /MONVOL/FVMBAG1.
ANSA-77714
Importing a REFSTA file would remove coordinates from nodes if refsta node visibility
was activated.
BCS-963
ANSA-76696
Handling of /REFSTA would be erroneous when the General tab option "Header
Merge" was activated.
ANSA-76850
Output Erroneous output of entities with Names expanding in more than one line.
BCS-1758
For the /XREF entity, the Part Identifier information would not be maintained.
ANSA-77229
Erroneous output of /SURF group containing solid properties with excluded solid
elements.
BCS-2766
Erroneous group output when used by /MONVOL/AIR and the 'OUTPUT TYPE' field
was blank.
ANSA-77370
BCS-1706
Erroneous surface group output with excluded group structure would occur.
ANSA-77234
Properties For /PROP/TYPE51 and /PROP/TYPE17, the ply property identifier for layers would
be erroneously renumbered.
For /PROP/TYPE19, the name would not be maintained.
BCS-986
Materials The field of Reference density would not be supported for /MAT/LAW65,
/MAT/LAW66, /MAT/LAW76, /MAT/LAW77, /MAT/LAW82 and /MAT/LAW83.
BCS-824
TIME Contents of /TH/PART could not be modified through 'Modify Contents' function of
HISTORY context menu.
BCS-2304
AUXILIARIES CONTROL
The "DELETE FILE" for the REFSTA entities would not erase all REFSTA_NODE
entities from the Database Browser.
ANSA-76333
FUNCT
The Plot Area of the function would not get updated when an Fscaley value from a
related /MOVE_FUNCT would be converted from the corresponding SFO field of
*DEFINE_CURVE in LS-DYNA.
ANSA-77150
BCS-1871
INTERFC [List]
'Replace Segments' of context menu would produce EDGEs instead of SHELLs for
Interfaces of TYPE 2.
BCS-1356
LAMINATE [LIST]
ANSA-74060
RES.MAP
ANSA-76822
When Equivalent Plastic Strain and Nodal Thickness Mapping Types are requested,
the thickness information from the /INISHE/EPSP_F would be overwritten by the
mapped nodal thickness.
BCS-2501
ANSYS
LOADs SFE
SFE distributed loads with values other than 0,1 in the "facet" card field, would not be
displayed with the correct orientation.
The "facet" field in SFE entity card is now considered for shells also in order to
respect the definition of the ANSYS facet according to the ET of the underlying
element.
ANSA-45862
PERMAS
Input/ Output In a multi-include model, ELPROP_SHELL properties would not output their THICK
values.
ANSA-78831
When Medina models were imported for a PERMAS model, zero values for density,
thermal expansion and structural damping would be misinterpreted, which would
result in invalid PERMAS material definitions.
BCS-2645
Input When reading a MEDINA file SUPPRESS entities would be erroneously assigned to
empty sets.
ANSA-81394
BCS-3059
CONSTRAINTS CONTACT
Pressing the OK button of a CONTACT NODE card would clear its CORD.
ANSA-81360
Moldex3D
Checks Melt Entrance
New check is now supported to ensure that not partial nodes of a facet have been
assigned Melt Entrance point attribute.
ANSA-76626
TAITherm
ELEMENTs INFO
A Multilayer Part would turn into Shell Part, when the Cancel button was pressed.
BCS-2535
OPTISTRUCT
Output Undefined Nodes would be output.
BCS-3176
The EIGRA (Real Eigenvalue Extraction Data using Automated Multi-Level Sub-
structuring) keyword would not be supported under the METHOD in Subcase
Information Section.
ANSA-79675
CROSS SECTION
Scripting base.DeleteEntity()
Cross section entities could not be deleted, when referenced from a beam property.
BCS-1824
KINETICS
General The faces' cross-hatches would not be updated, when a model was moved to a new
position.
ANSA-77759
Bodies Flex
ANSA-79725
The animation of a PTCV marker would appear attached to curve, when the option
"Animate during calculation" option was enabled; otherwise, the marker would appear
unattached to the curve.
ANSA-64206
ANSA-80999
Design Measure
Analysis
Incorrect values would be shown on plots of Kin_Measures during simulation,
although the values were correct when plotted afterwards within the Results Viewer.
ANSA-77030
Measure [Angle]
60064, ANSA-38550
Unexpected termination could occur, when confirming the last step of the Flex Builder
process.
ANSA-81077
Glue contact entities would not be written out properly leading to incorrect Nastran
files.
ANSA-79195
Simulation Results
During results file output the KIN entities names would be written incorrectly. As a
consequence, no animation would be visible in META.
ANSA-79819
Simulator
Bodies consisting of CAD geometries would return to wrong position after animating
a model.
ANSA-80029
Erroneous warning messages would appear in Info window during simulation even
when the recommended solver was used.
ANSA-78820
Unexpected termination would occur when a SET was selected in the Flex Body
Results Topology window.
ANSA-79010
MORPH
Boxes New [Adapt> Bounds]
The selection of solid elements was not supported. Any attempt to redefine a box
would lead to unexpected termination.
ANSA-78517
Controls History
The option "Create Deform" would create a Deformation Parameter with target value
2.0 instead of 1.0.
ANSA-78027
Parameters
The DFM scale parameter would start from initial value 0 instead of 1.
BCS-1765
BCS-3006
BCS-2548
DFM
Hexablock structured mesh, subject to morphing under DFM methods handling the
Hexablock box corners, would occasionally produce non-smooth results.
ANSA-77559
Morphing the parent of linked faces would not provide the same result on child faces.
ANSA-78104
DFM morphing on volume mesh with Domain Finder would not produce accurate
results, when Morphing was set to Fast.
ANSA-79629
The function would fail to fill the gap, in case the selected feature contained Red
Bounds.
ANSA-78096
Direct Holes-Tubes
Morphing
The modification of multiple selected holes/tubes was not feasible in Windows
operating system.
BCS-2922
ANSA-80883
Task Manager
DOE Tool Saving the DOE Report under any of the available format would lead to unexpected
termination.
BCS-2702
Scripting
General Script functions that expect a dictionary as input argument would not raise a
TypeError, if a variable of different type was passed instead.
ANSA-75778
ReportPenetratedPairsOfPIDs()
Unexpected termination would occur when the session was executed to use more than one number of
processors.
ANSA-77221
base.AddToAnnotation()
The function would lead to unexpected termination, if the second parameter was None.
BCS-1894
base.ChangeElemType()
Function would not work when converting elements that were created in a different deck.
ANSA-76862
base.CheckIntersections()
In same-PID cases, the function would return None, even if intersections existed.
BCS-2466
base.ReportPenetratedPairsOfPIDs()
Unexpected termination would occur when check_type was 1 (intersections check) and solid elements
were involved.
ANSA-76794
base.SetPickMethod()
The function would not work as expected, when the picking method was set to PolyLine via the
respective argument 'base.constants.POLY_AREA_AREA_SELECTION'.
BCS-1798
utils.Messenger()
ANSA messages printed on the terminal would not be suppressed, when inputting files in nogui mode
(via script), although echo(False) was set.
BCS-2493
Scripts Collection
ApplyFilmCSV.py
BCS-2229