Professional Documents
Culture Documents
AeroShell Grease 22
Synthetic grease for aircraft
AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil
thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to
achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties.
The useful operating temperature range is –540C to +1770C.
·
retention and high resistance to water washout are
required. DCSEA 395/A (French)
· The wide range of applications include aircraft wheel · Russian : Analogue of CIATIM 201 and 203, VNII NP 207,
ERA (VNII NP 286M) and ST (NK-50)
bearings, engine accessories, control systems, actuators,
screw-jacks, servo mechanisms and electric motors, · NATO Code G-395
helicopter rotor bearings, instruments, airframe lubrication,
hinge pins, static joints, landing gears.
· Joint Service Designation : XG-293
Dropping point 0
C ASTM D2265 232 min >300
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
https://www.epc.shell.com
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.