Professional Documents
Culture Documents
This MSDS complies with Directives 67/548/CEE, 1999/45/CE, 1907/2006/CE (REACH), 1272/2008/CE (CLP) and their amendments.
2 Hazards identification
4 First-aid measures
First aid
Inhalation : remove the exposed person from contaminated area; keep warm and in fresh air.
: if victim has trouble breathing, transport to medical care and give supplemental oxygen.
: in case of loss of consciousness, give artificial respiration.
- Skin contact : take off immediately all contaminated clothing.
: wash thoroughly with soapy water.
- Eye contact : wash with plenty of water,for at least 15 minutes, keeping the lids well open.
: seek medical advice.
- Ingestion : keep the injured person warm and at rest.
: rinse the mouth with clean water; give plenty of water, seek medical advice.
: do not give anything by mouth to an unconscious or convulsing person.
: do not induce vomiting.
: if aspiration is suspected (during spontaneous vomiting,for instance),seek medical advice
urgently.
Extinguishing media
- Suitable : carbon dioxide, dry chemicals, foam, water spray ( or fog).
- Not suitable : water jets.
Fire/explosion hazards : as a water solution, the fire is highly improbable.
Fire-fighting procedures : fire fighters and others who may be exposed to the products of combustion, should be
equipped with NIOSH approved positive pressure self-contained breathing apparatus and full
protective clothing.
: when exposed to flames or high temperatures encountered during fire conditions, sealed
containers may rupture because of the build up of internal pressure: cool containers with water
and remove.
: the contaminated water used for extinguishing must be disposed of in accordance with local
legislation.
Handling : take precautionary measures against static discharge during blending and transfer operations.
: avoid contact with skin and eyes.
: handle the product near emergency washing and eye wash bottles.
: protect eyes from vapour/spray.
Storage : store in well closed boxes.
: store in a fresh and well-ventilated place, away from incompatible substances.
: store away from all sources of ignition (heat sources, sparks and open flames).
Suitable storage materials : stainless steel, natural or butylic rubber, polyethylene, PVC, polyesther, teflon.
Not suitable storage materials : carbon steel, nylon, polyurethanes and poly-methyl methacrylates.
Occupational exposure limits : this product is a complex mixture and contains following substances with recommended or
approved OEL limits:
TLV (mg/m3) : ---
TLV (ref. to solvent) (mg/m3) : ---
Personal protection
- Respiratory protection : none under normal conditions.
: ensure good ventilation.
: a localized aspiration is necessary if the warmed product forms vapours.
: protective mask in case of exposure to vapours formed by warmed product.
- Skin protection : protective gloves in neoprene or latex, approved for protection against chemical substances
(EC seal - Directives 89/686 and 93/68).
- Eye protection : goggles or face shield with safety glasses.
- Others : appropriated protective clothing.
: eyewash bottle with clean water.
Industrial hygiene : ventilate thoroughly the working place.
: do not eat or drink when handling this product.
: remove all contaminated clothing and remove protective clothing when the work is completed.
: handle in accordance with good industrial hygiene and safety procedures.
Appearance
Physical state at 20°C : liquid.
Colour : yellow.
: product color variations do not affect its performance
Odour : characteristic.
Change in physical state -760
mm Hg
Freezing point (°C) : n.d.
Boiling point (°C) : ca. 100 °C
Pour point (ASTM D97) (°C) : n.d.
Density at 20°C (gr/cm3) : 1.16 ± 0.02
Viscosity at 20°C (cP) : < 100
Solubility in water (% weight) : complete.
Soluble in : water.
pH value (concentrated product) : 9.5 ± 1.0
Flash point (ASTM D 93) (°C) : none.
Auto-ignition temperature (°C) : n.d.
Explosion limits
- Lower (% vol) : n.d.
- Upper (% vol) : n.d.
Thermal decomposition (°C) : not determined.
Further information : The physical and chemical properties reported in this document are not to be considered
Technical Specifications, and therefore they do not constitute a contractual obligation.
11 Toxicological information
12 Ecological information
Information on ecological effects : utilize in accordance with good working practice and avoid to disperse the product in the
environment.
Mobility : the waste water contaminated by the product requires suitable chemical and physical (settling,
adsorption on active carbon) or biological treatment.
96 Hour-LC50-fish (mg/l) : n.d.
Persistence and degradability : with a correct disposal in biological treatment system, are not expected problems for the
degradation activity of activated sludge.
Biodegradation (%) : the product is readily biodegradable.
Bioaccumulative potential : the product has been shown to present no bioaccumulation hazard in aquatic plants or fish.
WGK class (Germany) : no hazardous.
AOX : the product does not contain organic halons.
13 Disposal considerations
14 Transportation information
15 Regulatory information
Safety, Health and Environmental : refer to relevant international/national regulations for specific actions that should be taken or
Regulations/Legislation specific specific provisions applicable
for the substance or mixture
Chemical safety assessment : a Chemical Safety Assessment has not been carried out
16 Other information
Further information
Sources of key data used : N.Irving SAX - Dangerous properties of Industrial Materials ( Sixth edition) - Edited by Van
Nostrand Reinhold Company - 1984
: TLV - Threshold Limit Values for Chemical Substances in Work Environment - Adopted by
ACGIH - 2000
: A.D.R. - European Agreement concerning the international carriage of Dangerous Goods by
Road - United Nation Publication
: Karel VERSCHUEREN - Handbook of Environmental data on organic chemicals - 1977
Information for medical staff
Revised chapters : The chapters indicated by " ********** " have been modified with the present version of this
MSDS.
The information reported on this MSDS results from our present state of knowledge on safety regulations and is not to be considered as a
guarantee of any specific product property.
CHIMEC cannot be held responsible for any injury or damage deriving from the improper application of the product.