Professional Documents
Culture Documents
Before starting DOWNLOAD the Smart Aligner App to your iPhone (iOS 7.0 or greater) or Android phone (4.1 or greater). For iOS go to the App Store and search “Smart
Aligner”. For Android go to the Google Play Store and search “smart aligner multiwave”. The iOS App and Android App have some differences as a result of different
operating systems. For Android devices with operating system less than 4.4 the Report will be in JPG format. For Android 4.4 the Report will be in PDF format (if high
resolution images are required select the JPEG option in Settings). This guide will show the user how to carry out an antenna alignment from start to finish for one
antenna and tool mounting configuration. Main Components
What’s in the case? Smart Aligner Tool (shown in folded position) Universal Mounting Bracket
1 2 Small Arm
3 Ratchet Strap with hook
Backpack Ratchet Strap Fastening Pins
Long Arm Mounting Screw Knob Receptacle
Attach the Universal Mounting Bracket to the antenna Attach the Smart Aligner Tool to the Universal Mounting Bracket 11 10
4 1. Tether the Universal Mounting
5 7. Tether the Smart Aligner Tool to
Bracket to a solid location. NOTE: Universal Mounting the Universal Mounting Bracket NOTE: Smart Aligner Tool can
Bracket can be mounted on 8. Line up the Mounting Dowel be mounted either front
2. Set the Universal Pins (underside of Tool) to the
either the right side (shown) (shown) , right or back
Mounting Bracket on the Dowel Pin Receptacles on the
backplane of the antenna or left side of antenna
Universal Mounting Bracket
as shown. Keep the 7
9. Tighten the Mounting Screw
Bracket in place by 4
Knob on the Smart Aligner Tool
holding on to the handle. 6 8,9
10. Rotate Small Arm clockwise till
3. Depress the orange you feel/hear it click in and engage
Strap Release button with
your thumb and hold it 11. Rotate the Long Arm counter- 11
10
4. With your other hand clockwise till you feel/hear it click
attach the hook of the in and engage
Ratchet Strap to the 12. Press the POWER
appropriate Ratchet Strap button on the User Interface and
Fastening Pin wait for an azimuth solution
3,5
5. Release the orange 2 12
13. Turn over page for App instructions
Strap Release button but
(example is for iOS.)
still hold the Bracket
6. Squeeze the Ratcheting
Handles until the Bracket 1
is tight to the antenna
Connect by Wifi to the Smart Aligner Tool
6 7 Smart Aligner App
1. You should already 2. In the list of WiFi networks
have downloaded you will see SmartAligner- 4. A splash screen will appear followed by the
the Smart Aligner SerialNumber. Main Menu. Before proceeding check Settings 5
App to your mobile Choose this Network and that Simulation mode is toggled to the off
device. Connect position as shown
18,19 9 Reporting