Professional Documents
Culture Documents
Download App
CSPHCL JE
CSPHCL JE Mechanical 11 Jan 2022 (English)
FREE LIVE
Participant ID
Participant Name
Test Center Name
Test Date 11/01/2022
Test Time 9:00 AM - 11:00 AM
Subject Junior Engineer Trainee - Mechanical
Q.1 Who among the following Indians won the Noble Prize in the field of Economics?
3. Both i and ii
4. Both i and iv
Question ID : 7532297989
Status : Answered
Chosen Option : 4
Q.2 Which style is a combination of both Dravida and the Nagara architectural styles?
Ans 1. Vesara architecture
2. Kalinga architecture
3. Indo-Saracenic architecture
4. Sikh architecture
Question ID : 7532297988
Status : Not Answered
Chosen Option : --
Q.3 ‘Mission Shakti’ is a separate department for women self-help groups that has been
launched by the ______ government in 2021.
Ans 1. Rajasthan
2. Punjab
3. Odisha
4. Tamil Nadu
Question ID : 7532297994
Status : Answered
Chosen Option : 3
Page - 1
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.4 Which of the following provisions in the Constitution of India has been taken from the
Constitution of Soviet Union (USSR)?
Ans 1. Fundamental Duties under Article 51-A
2. Republic and the ideals of Liberty, Equality and Fraternity in the Preamble
3. Concurrent List
4. Freedom of trade and commerce within the country and between the states
Question ID : 7532297993
Status : Answered
Chosen Option : 1
Q.5 Who among the following was the writer of the national song ‘Vande Mataram’, and the
novel Anandamath?
Ans 1. Batukeshwar Dutt
2. Rabindranath Tagore
3. Dinabandhu Mitra
Question ID : 7532297987
Status : Answered
Chosen Option : 4
Q.6 The 2022 ICC Women's Cricket World Cup will be held in ______.
Ans 1. South Africa
2. New Zealand
3. Australia
4. India
Question ID : 7532297986
Status : Not Answered
Chosen Option : --
Q.7 भारत सरकार की किस योजना का उद्देश्य विशेष रूप से महिलाओं, अनुसूचित जाति और अनुसूचित
जनजाति वर्ग के बीच उद्यमिता को बढ़ावा देना है?
Ans 1. स्टैंड अप इंडिया
2. कौशल भारत
3. स्टार्ट अप इंडिया
4. सुहाना भारत
Question ID : 7532297985
Status : Not Answered
Chosen Option : --
Page - 2
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.8 A multi-coloured light that sweeps across the sky of the northern pole is called:
Ans 1. aurora borealis
2. white dwarfs
3. nebulae
Question ID : 7532297991
Status : Answered
Chosen Option : 1
Q.9 निम्नलिखित में से कौन सी अर्थशास्त्र में घाटे की अवधारणा नहीं है?
Ans 1. कर घाटा
2. बजट घाटा
3. राजकोषीय घाटा
4. राजस्व घाटा
Question ID : 7532297990
Status : Answered
Chosen Option : 1
2. eye vision
Question ID : 7532297992
Status : Answered
Chosen Option : 4
Q.11
Ans 1.
2.
3.
4.
Question ID : 7532298004
Status : Answered
Chosen Option : 4
Page - 3
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.12
Ans 1.
2.
3.
4.
Question ID : 7532298000
Status : Answered
Chosen Option : 4
Q.13
Ans 1.
2.
3.
4.
Question ID : 7532297996
Status : Answered
Chosen Option : 1
Page - 4
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.14
Ans
1.
2.
3.
4.
Question ID : 7532298002
Status : Not Answered
Chosen Option : --
Q.15
Ans 1.
2.
3.
4.
Question ID : 7532297995
Status : Answered
Chosen Option : 1
Q.16
Ans 1.
2.
3.
4.
Question ID : 7532297998
Status : Answered
Chosen Option : 4
Page - 5
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.17
Ans 1.
2.
3.
4.
Question ID : 7532298001
Status : Answered
Chosen Option : 2
Q.18
Ans 1.
2.
3.
4.
Question ID : 7532297999
Status : Answered
Chosen Option : 4
Q.19
Ans 1.
2.
3.
4.
Question ID : 7532298003
Status : Answered
Chosen Option : 1
Q.20
Ans 1.
2.
3.
4.
Question ID : 7532297997
Status : Answered
Chosen Option : 1
Page - 6
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.1 For A = maximum displacement of the forced vibration and B = the deflection due to
the static force, the A/B is known as:
Ans 1. logarithmic decrement
2. magnification factor
3. damping coefficient
4. damping factor
Question ID : 7532298058
Status : Answered
Chosen Option : 2
Q.2 Heat transfer occurs spontaneously from a hot object to a cold one, consistent with
the:
Ans 1. Third law of thermodynamics
Question ID : 7532298017
Status : Answered
Chosen Option : 4
Q.3 A
bolt of 30 mm diameter and 100 mm length is made using hand forging from a rod of
diameter 25 mm. The total rod length required to make 10 such bolts is about:
Ans 1. 0.5 m
2. 1.5 m
3. 1 m
4. 2 m
Question ID : 7532298082
Status : Answered
Chosen Option : 2
2. unity
3. zero
Question ID : 7532298055
Status : Answered
Chosen Option : 1
Page - 7
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 7532298016
Status : Answered
Chosen Option : 2
Q.6 For single point cutting tool, the angle between face and flank is known as:
Ans 1. rake angle
2. lip angle
3. clearance angle
4. point angle
Question ID : 7532298068
Status : Answered
Chosen Option : 2
2. twisting moment
3. bending moment
Question ID : 7532298066
Status : Answered
Chosen Option : 4
2. rectangle
4. triangle
Question ID : 7532298025
Status : Not Answered
Chosen Option : --
Q.9 Select the INCORRECT statement about Time Temperature Transformation (TTT)
curves.
Ans 1. TTT curve is also called S-curve.
Question ID : 7532298040
Status : Answered
Chosen Option : 2
Page - 8
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 7532298072
Status : Answered
Chosen Option : 2
Q.11 The gauge which has gauging sections combined on one end is:
Ans 1. combination gauge
2. progressive gauge
3. limit gauge
4. fixed gauge
Question ID : 7532298062
Status : Not Answered
Chosen Option : --
Question ID : 7532298079
Status : Answered
Chosen Option : 4
Q.13 A shopkeeper places orders once a month to meet an annual demand of 6000 units.
The average inventory is:
Ans 1. 250
2. 350
3. 150
4. 450
Question ID : 7532298031
Status : Answered
Chosen Option : 1
2. MR Walker
3. JE Kelley
4. Henry Gantt
Question ID : 7532298028
Status : Answered
Chosen Option : 1
Page - 9
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. preventive maintenance
3. condition-based maintenance
4. routine-based maintenance
Question ID : 7532298043
Status : Answered
Chosen Option : 2
2. mould box
3. pattern
4. cutting tool
Question ID : 7532298045
Status : Answered
Chosen Option : 2
2. modulus of rigidity
4. bulk modulus
Question ID : 7532298013
Status : Answered
Chosen Option : 2
Question ID : 7532298077
Status : Answered
Chosen Option : 1
Page - 10
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.19 उद्यमिता (entrepreneurship) में, SIDCO (सिडको) का पूर्ण रूप क्या है?
Ans 1. Small Indian Development Corporations (स्मॉल इंडियन डेवलपमेंट कॉर्पोरे शंस)
Question ID : 7532298083
Status : Not Answered
Chosen Option : --
2. Benson boiler
3. Loffler boiler
4. La Mont boiler
Question ID : 7532298078
Status : Answered
Chosen Option : 2
2. Journal bearing
Question ID : 7532298056
Status : Answered
Chosen Option : 1
2. solid modelling
3. surface modelling
4. wireframe modelling
Question ID : 7532298065
Status : Not Answered
Chosen Option : --
Page - 11
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. location tolerance
3. runout tolerance
4. form tolerance
Question ID : 7532298005
Status : Answered
Chosen Option : 4
2. 2 and 3
3. 1 and 2
4. 1 and 3
Question ID : 7532298023
Status : Answered
Chosen Option : 1
2. Only 2
3. 1 and 2
4. Only 1
Question ID : 7532298036
Status : Answered
Chosen Option : 2
Q.26 What is the COP of a Carnot heat pump, if it works between 277°C and 27°C
temperatures?
Ans 1. 1.1
2. 9.27
3. 6.175
4. 2.2
Question ID : 7532298074
Status : Answered
Chosen Option : 4
Page - 12
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.27 संभवतः , निम्न में से कौन सा उद्यमी (entrepreneur) का सबसे महत्वपूर्ण कार्य है?
Ans 1. नवप्रवर्तन कार्य
2. प्रबंधन कौशल
3. निर्णय लेना
4. जोखिम लेना
Question ID : 7532298084
Status : Not Answered
Chosen Option : --
Q.28 For Taylor's tool life exponent of a tool equals 1/3 if cutting speed is halved, the tool
life will increase:
Ans 1. four times
2. sixteen times
3. two times
4. eight times
Question ID : 7532298069
Status : Answered
Chosen Option : 4
Question ID : 7532298012
Status : Answered
Chosen Option : 3
Question ID : 7532298034
Status : Answered
Chosen Option : 1
Page - 13
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. minimum
3. maximum
4. zero
Question ID : 7532298024
Status : Not Answered
Chosen Option : --
Q.32 Which of the following is a device which is NOT used for angle measurement?
Ans 1. Combination set
2. Bevel protector
3. Sine bar
4. Filler gauge
Question ID : 7532298059
Status : Answered
Chosen Option : 4
2. sliding
3. wringing
4. adhesion
Question ID : 7532298061
Status : Answered
Chosen Option : 3
2. 1 and 2
3. 1 and 3
4. 2 and 3
Question ID : 7532298042
Status : Answered
Chosen Option : 3
Page - 14
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.35 Two long mild steel rods of thickness 10 mm each need to be welded using arc
welding. If current used and voltage is 200 Amp and 40 Volt, respectively, then what is
the power cost, if machine efficiency is 80%?
Ans 1. 5 kW
2. 20 kW
3. 15 kW
4. 10 kW
Question ID : 7532298081
Status : Answered
Chosen Option : 4
2. Knurling
3. Tapper
4. Reaming
Question ID : 7532298070
Status : Answered
Chosen Option : 1
Question ID : 7532298052
Status : Answered
Chosen Option : 3
Q.38
Ans 1.
2.
3.
4.
Question ID : 7532298010
Status : Answered
Chosen Option : 1
Page - 15
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Fatigue strength
3. Percentage of elongation
4. Impact strength
Question ID : 7532298049
Status : Answered
Chosen Option : 2
Question ID : 7532298007
Status : Answered
Chosen Option : 1
Q.41
Ans
1.
2.
3.
4.
Question ID : 7532298057
Status : Answered
Chosen Option : 3
Question ID : 7532298006
Status : Answered
Chosen Option : 1
Page - 16
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. aluminium
3. bronze
4. cast iron
Question ID : 7532298048
Status : Not Answered
Chosen Option : --
Q.44
Ans 1.
2.
3.
4.
Question ID : 7532298022
Status : Not Answered
Chosen Option : --
Q.45 Which of the following has the property to withstand high temperature?
Ans 1. Water
2. Silica
3. Moisture
4. Clay
Question ID : 7532298047
Status : Answered
Chosen Option : 2
Q.46
Ans 1.
2.
3.
4.
Question ID : 7532298054
Status : Answered
Chosen Option : 4
Page - 17
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
3. continuous production
4. batch production
Question ID : 7532298027
Status : Not Answered
Chosen Option : --
2. checking straightness
3. checking parallelism
4. checking flatness
Question ID : 7532298060
Status : Not Answered
Chosen Option : --
Q.49 Modern CAD systems are ICG based. Here, ICG stands for:
Ans 1. Interactive Computer Group
Question ID : 7532298064
Status : Answered
Chosen Option : 3
Q.50
Ans
1.
2.
3.
4.
Question ID : 7532298032
Status : Answered
Chosen Option : 4
Page - 18
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.51 A column of length 'L' is fixed at both the ends. The equivalent length of the column is:
Ans 1. 4 L
2. L
3. 2 L
4. 0.5 L
Question ID : 7532298014
Status : Answered
Chosen Option : 4
Question ID : 7532298030
Status : Answered
Chosen Option : 3
Q.53 Compared to other turbines, Pelton wheel is ideally suited, where required:
Ans 1. head and discharge both are high
Question ID : 7532298037
Status : Answered
Chosen Option : 1
Q.54 Two blocks having different states are placed in contact with each other and allowed
to reach in thermal equilibrium. The final temperature of the blocks is specified by the:
Ans 1. First law of thermodynamics
Question ID : 7532298019
Status : Answered
Chosen Option : 4
Page - 19
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.55 F
ind the tensile strain produced in a steel rod of length 300 mm and elongation is 3
mm, when subjected to a tensile load of 60 kN.
Ans 1. 3
2. 0.001
3. 0.1
4. 0.01
Question ID : 7532298009
Status : Answered
Chosen Option : 4
4. material handling
Question ID : 7532298029
Status : Answered
Chosen Option : 1
Q.57 Consider the following statements about belt and pulley drive.
2. 1, 2 and 3
3. 1 and 3
4. 1 and 2
Question ID : 7532298067
Status : Not Answered
Chosen Option : --
2. path function
3. extensive properties
4. intensive properties
Question ID : 7532298020
Status : Answered
Chosen Option : 2
Page - 20
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 7532298038
Status : Answered
Chosen Option : 4
Question ID : 7532298035
Status : Answered
Chosen Option : 1
Question ID : 7532298075
Status : Answered
Chosen Option : 2
3. 1 alone is correct
4. 2 alone is correct
Question ID : 7532298018
Status : Answered
Chosen Option : 3
Page - 21
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.63 T
he upper eye of a telescopic shock absorber is attached to the ______ and the lower
eye is attached to the______.
Ans 1. axle; chassis frame
4. axle; seat
Question ID : 7532298073
Status : Answered
Chosen Option : 3
Q.64 Which command of auto CAD is used to create a line of infinite length?
Ans 1. PL
2. PE
3. XE
4. XL
Question ID : 7532298063
Status : Not Answered
Chosen Option : --
Q.65 The function of production planning and control related to the timetable of activities
is:
Ans 1. dispatching
2. scheduling
3. expediting
4. routing
Question ID : 7532298051
Status : Answered
Chosen Option : 2
Q.66 The process of removing air from the hydraulic brake system is called:
Ans 1. squeezing
2. bleeding
3. air neutralisation
4. filtration
Question ID : 7532298071
Status : Not Answered
Chosen Option : --
Page - 22
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. are parallel
Question ID : 7532298033
Status : Answered
Chosen Option : 1
Q.68
Ans
1.
2.
3.
4.
Question ID : 7532298021
Status : Answered
Chosen Option : 3
Q.69 If the length of a helical spring is halved, then for every individual part, the stiffness
will:
Ans 1. become half
2. become double
4. become triple
Question ID : 7532298015
Status : Answered
Chosen Option : 2
Q.70
Ans
1.
2.
3.
4.
Question ID : 7532298046
Status : Answered
Chosen Option : 3
Page - 23
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 7532298050
Status : Answered
Chosen Option : 3
Q.72 The type of pictorial projection, in which one face is inclined to the plane of projection
at an angle of 45⁰ and the adjacent face is parallel to the plane of projection is known
as:
Ans 1. perspective projection
2. orthographic projection
3. isometric projection
4. oblique projection
Question ID : 7532298008
Status : Answered
Chosen Option : 1
2. Otto cycle
3. Rankine cycle
4. Stirling cycle
Question ID : 7532298080
Status : Answered
Chosen Option : 1
Q.74 Property of material due to which it can undergo permanent deformation without
rupture is known as:
Ans 1. compressibility
2. rigidity
3. elasticity
4. plasticity
Question ID : 7532298039
Status : Answered
Chosen Option : 4
Page - 24
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. 40%
3. 60%
4. Zero
Question ID : 7532298076
Status : Answered
Chosen Option : 1
Q.76 Which of the following information does the Gantt chart provide?
Ans 1. Proper utilisation of man power
2. Production schedule
4. Material handling
Question ID : 7532298026
Status : Answered
Chosen Option : 2
Q.77 The minimum number of links required to form a planar mechanism with all lower
pairs is:
Ans 1. six
2. four
3. three
4. five
Question ID : 7532298053
Status : Answered
Chosen Option : 2
Q.78 A
point in shear force and bending moment diagram where bending moment changes
its sign is known as:
Ans 1. point of shear stress
2. moment point
3. shear point
4. point of contra-flexure
Question ID : 7532298011
Status : Answered
Chosen Option : 4
Page - 25
https://testbook.com/ https://play.google.com/store/apps/details?id=com.testbook.tbapp
4. to increase hardness
Question ID : 7532298041
Status : Answered
Chosen Option : 3
Question ID : 7532298044
Status : Not Answered
Chosen Option : --
Page - 26