Professional Documents
Culture Documents
Wa0009.
Wa0009.
2 : What is the length of one link in metric B : Trilateration method | राई लिटरे शन पवचध
chain? | मीट्ररक जरीब में एक लिंक की िंबाई क्या है ? C : Triangular method | त्रत्रकोणीय पवचध
A : 10 cm D : Polar co-ordinate method | ध्रुवीय समन्वय
B : 15 cm पवचध
C : 20 cm
D : 25 cm
6 : What is the length of metric chain? | मीट्ररक
3 : What is the name of the setting out the work श्ंख
ृ िा की िंबाई क्या है ?
on the ground? | धराति पर कायय को स्थापपत करने A : 5m and 20m
का क्या नाम है ? B : 10m and 15m
C : 15m and 20m
A : Location survey | स्थान सवेक्षण D : 20m and 30m
B : Preliminary survey | प्रारं लिक सवेक्षण
7 : What is the chain of 100 feet long generally
C : Topographical survey | स्थिाकृततक सवेक्षण
used for taking offset in chain surveying? | जरीब
D : Engineering survey | इंजीतनयररंग सवेक्षण
सवेक्षण में ओफ़्सेट िेने के लिए आमतौर पर इस्तेमाि
4 : What is the principle of survey? | सवेक्षण का होने वािी 100 फीट िंबी जरीब कौन सी है?
C : Work from whole to part | पूरे िाग से अवयव D : Engineer s chain | इंजीतनयर जरीब
की ओर कायय
8 : What is the name of the equipment? |
D : Work from part to whole | अवयव से परू े िाग उपकरण का नाम क्या है?
की ओर कायय
B : Wooden peg | वड
ु न पेग सीमा क्या है?
C : Off set rod | ऑफ सेट रॉड A : ± 2 mm
B : ± 4 mm
D : Ranging rod | रें जजंग रॉड C : ± 6 mm
D : ± 8 mm
9 : What is the surface that is normal to the
direction of gravity at all points? | वह कौन सी सतह 14 : Which type of tape is commonly used for
है जो सिी त्रबंदओ
ु ं पर गरु
ु त्वाकर्यण की ट्रदशा सामान्य है ? measuring offset? | ऑफसेट को मापने के लिए
A : Levelling | िेवलिंग सामान्यतः ककस प्रकार के टे प का उपयोग ककया जाता है?
B : Horizontal surface | क्षैततज सतह A : Linen tape | लिनन टे प
C : Horizontal line | क्षैततज रे खा B : Steel tape | स्टीि टे प
D : Level surface | समति सतह C : Invar tape | इन्वार टे प
D : Metallic tape | धातई
ु टे प
10 : What is the line that lies on a level surface
and is normal to plumb line at all points? | वह कौन 15 : What is the error that arise due to variation
सी रे खा है जो एक िेवि की सतह पर जस्थत है और सिी of temperature? | तापमान की लिन्नता के कारण
त्रबंदओ
ु ं पर प्िंब रे खा के लिए सामान्य है ? उत्पन्न होने वािी त्रुट्रट क्या है?
A : Level line | िेवि िाइन A : Natural error | प्राकृततक त्रुट्रट
B : Vertical line | ऊर्धवायधर रे खा B : Personal error | व्यजक्तगत त्रट्रु ट
C : Datum line | डेटम िाइन C : Instrumental error | उपकरण त्रुट्रट
D : Horizontal line | क्षैततज रे खा D : Artificial error | कृत्रत्रम त्रुट्रट
11 : What is the limit of error in 20m chain as 16 : What is the length of metallic tape available
per IS? | आईएस के अनुसार 20 मीटर जरीब में त्रुट्रट की in feet? | धातु के टे प की कफट में िंबाई क्या है ?
सीमा क्या है? A : 15 feet and 30 feet | 15 फीट और 30 फीट
A : ± 3 mm B : 30 feet and 45 feet | 30 फीट और 45 फीट
B : ± 5 mm
C : 45 feet and 60 feet | 45 फीट और 60 फीट
C : ± 6 mm
D : ± 8 mm D : 50 feet and 100 feet | 50 फीट और 100 फीट
12 : What is the term for error that occur due to 17 : What is the lateral surface distance
faulty adjustments of device such as chain may be measured from the chain to object? | जरीब से पार्शवय
too long or too short? | त्रुट्रट के लिए शब्द क्या है जो सतह की दरू ी को वस्तु से क्या मापा जाता है?
जरीब जैसे उपकरण के दोर्पण
ू य समायोजन के कारण होता A : Off set | ओफ़्सेट
है बहुत िंबा या बहुत छोटा हो सकता है ? B : Long off set | िम्बा ऑफसेट
A : Natural error | प्राकृततक त्रुट्रट C : Short off set | छोटा ऑफ सेट
B : Personal error | व्यजक्तगत त्रट्रु ट D : Oblique off set | ओजब्िक ऑफ सेट
C : Artificial error | कृत्रत्रम त्रट्रु ट
D : Instrumental error | उपकरण त्रुट्रट 18 : What is the term that the distance
measured at right angles to the chain line from the
13 : What is the limit of error for 30m chain as object? | वह शब्द क्या है जो वस्तु से जरीब रे खा तक
per IS? | आईएस के अनस
ु ार 30m जरीब के लिए त्रट्रु ट की समकोण पर मापा जाता है ?
Draughtsman Civil – Semester 2 Module 1 : Chain Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
C : Horizontal surface | क्षैततज सतह C : By adjusting the links at the handle | हैंडि पर
C : South | दक्षक्षण
29 : Which method is used for plotting a
D : North | उत्तर traverse survey in compass? | कम्पास में एक रे वसय
सवेक्षण के लिए ककस पदधतत का उपयोग ककया जाता है ?
27 : What is the name of instrument? | यंत्र का
नाम क्या है ?
D : The vertical hair being thick | ऊर्धवायधर हे यर the amount of variation may be even 1° or 2°? |
का मोटा होना िुंबकीय पवक्षोि जैसे कक िक
ू ं प और िूकंप की मात्रा 1 ° या
2 ° हो तो डेकलिनेशन में रूपान्तर होगा
31 : What is the error if the magnetic needle of A : Secular variation | सेक्युिर रूपांतर
a compass not being straight? | यट्रद कम्पास की B : Annual variation | वापर्यक रूपांतर
िुंबकीय सुई सीधी न हो तो क्या त्रुट्रट है ? C : Irregular variation | अतनयलमत रूपांतर
A : Instrumental error | उपकरण त्रुट्रट D : Regular Variation | तनयलमत रूपांतर
B : Manipulation error | मतनपुिेशन त्रट्रु ट
C : Sighting error | दृजष्ट्ट संबंधी त्रुट्रट 36 : What is the variation, in the magnetic
merdian swings like a pendulum in one direction for
D : External influences | बाहरी प्रिाव a long period and gradually comes to rest and then
swings in the opposite direction? | िुंबकीय
32 : Which method is more accurate in plotting
a compass survey? | कम्पास सवेक्षण में प्िोट्रटंग के मेररडडयन में एक ट्रदशा में पें डुिम की तरह एक िंबी
लिए कौन सी पवचध अचधक सटीक है ? अवचध के लिए घूमता है और धीरे -धीरे आराम करने के
A : Parallel meridian method | समानांतर लिए आता है और कफर पवपरीत ट्रदशा में जस्वंग करता है तो
B : Included angle method | आंतररक कोण पवचध A : Secular variation | सेक्युिर रूपांतर
C : Paper protractor method | पेपर प्रॉटे क्टर पवचध B : Annual variation | वापर्यक रूपांतर
33 : What angle is differed due is local attraction 37 : What is the compass with the graduations
at a particular place detected in fore and back are marked as south with 0° and north with 180°? |
bearing line? | फॉर और बेक त्रबयररंग िाइन में पाए गए ककस कम्पास में ग्रेज्युएशन को 0 ° के साथ दक्षक्षण में और
ककसी पवशेर् स्थान पर िोकि अरे कशन को ककस कोण 180 ° के साथ उत्तर में चिजह्नत ककया जाता है ?
34 : What is the true bearing, if the magnetic 38 : What is the direction indicated by an
bearing of the line is N 37° W and the magnetic imaginary circle passing around the earth through
declination is 2°E? | ट्रू त्रबयररंग क्या होगी , यट्रद िाइन the place north and south pole? | उत्तर और दक्षक्षण
का िुंबकीय त्रबयररंग N 37 ° W है और मैग्नेट्रटक ध्रुव के मार्धयम से पथ्
ृ वी के िारों ओर से गुजरने वािे
डेकलिनेशन 2 ° E है ? का्पतनक वत्त
ृ दवारा बताई गई ट्रदशा क्या है ?
A : N 35° W A : True meridian | ट्रू मेरीडडयन
B : S 35° E B : Arbitrary meridian | अत्रबयटरी मेररडडयन
C : N 39° W
D : S 39° N C : Magnetic meridian | िुंबकीय मेररडडयन
D : Assured meridian | अतनजर्शित मेरीडडयन
35 : What is the variation of declination occured
due to magnetic storms such as earth quakes and
Draughtsman Civil – Semester 2 Module 2 : Compass Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
39 : What is the compass that has graduation बैक बेयररंग का क्या मान है ?
marked as 0° on North and South and 90° on East A : 215° 30’
and West? | कम्पास जजसमें ग्रेजुएशन को उत्तर और B : 240° 30’
दक्षक्षण में 0 ° और पूवय और पजर्शिम में 90 ° पर चिजह्नत C : 265° 30’
D : 300° 30’
ककया जाता है ?
A : Trough compass | रफ कम्पास 43a : Convert W.C.Bearing to quadrantal bearing?
B : Magnetic compass | िुम्बकीय कम्पास | W.C. को क्वाड्रेट बियर ग
िं में िदले
C : Surveyor s compass | सवेयर कम्पास
D : Prismatic compass | पप्रज्मीय कम्पास
A : 60° 00’
B : 62° 00’
A : 5° W C : 65° 00’
B : 5° E D : 67° 00’
C : 6° E
D : 6° W 43d : What is the angle between the lines OA and
OB if their respective bearings are 32° 30’ and 148°
43 : What is the value of back bearing of the line
00’? | यदद OA औ OB क की क्रमशः िीयर ग
िं 32 ° 30
AB when the fore bearing of the line is 85° 30 ? |
'औ 148 ° 00' हैं तो OA औ OB के िीच का कोण क्या है ?
जब रे खा का फॉर त्रबयररंग 85 ° 30 हो, तो िाइन AB के
Draughtsman Civil – Semester 2 Module 2 : Compass Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
44 : What is the name of the instrument? | यंत्र B : Errors of sighting | साइट्रटंग की त्रट्रु टयां
का नाम क्या है ? C : Errors of instrumental | उपकरण की त्रट्रु टयां
D : Errors of plotting | प्िोट्रटंग की त्रट्रु टयां
46 : What is name of the level which does not 50 : What is the term name for tracing the
required any protection from the sun? | उस िेवि drawing by means of ink (inking) with order of
tracing? | अनुरेखण के आदे श के साथ स्याही (िनक) के
का नाम क्या है जजसे सूयय से कोई सुरक्षा की आवर्शयकता
मार्धयम से ड्राइंग को रे स करने के लिए शब्द का नाम क्या
नहीं है ?
है ?
A : Auto level | ऑटो िेवि
A : Technique of tracing | रे लसंग की तकनीक
B : Tilting level | ट्रटिट्रटग
ं िेवि
B : Method of reproduction | प्रजनन की पवचध
C : Dumpy level | डम्पी िेवि
C : Sequence of tracing | अनुरेखण का अनुिम
D : Wye (y) level | बाय (y) िेवि
D : Should be traced in tracing cloth | कप़िे को
47 : What is the name of the error that the रे स करने में िगाया जाना िाट्रहए
fittings of table and tripod being loose? | त्रट्रु ट का
क्या नाम है कक तालिका और ततपाई की कफट्रटंग ढीिी हो 51 : What is the name of term that in this
method of survey it is less costly than other types of
रही है ?
survey? | शब्द का नाम क्या है कक सवेक्षण की इस
A : Errors of manipulation | मेतनपुिेशन की त्रुट्रटयां
पदधतत में यह अन्य प्रकार के सवेक्षण की तुिना में कम
Draughtsman Civil – Semester 2 Module 3 : Plane Table Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
52 : What is name of the survey in which field B : Scalene triangle | पवर्मबाहु त्रत्रकोण
work and plotting are done simultaneously in the C : Isosceles triangle | समदपवबाहु त्रत्रकोण
field? | उस सवेक्षण का नाम क्या है जजसमें फी्ड कायय D : Equilateral triangle | समिुज त्रत्रकोण
और प्िॉट्रटंग एक साथ फी्ड में ककए जाते हैं?
A : Chain survey | िेन सवेक्षण 56 : What is the name of method? | पवचध का
B : Compass survey | कम्पास सवेक्षण नाम क्या है ?
C : Engineering survey | इंजीतनयररंग सवेक्षण
D : Plane table survey | प्िेन टे बि सवेक्षण
60 : What is the name of the process of putting 64 : What is the method with three known
the plane table with some fixed direction so that object points and its plotted position on the
the line representing a particular direction on the drawing sheet are taken for solving the problem? |
plan is parallel to the direction on the ground? | तीन ज्ञात ऑब्जेक्ट पॉइंट के साथ पवचध क्या है और ड्राइंग
प्िेन टे बि को ककसी तनजर्शित ट्रदशा के साथ िगाने की शीट पर इसकी प्िॉट की जस्थतत समस्या को हि करने के
प्रकिया का क्या नाम है ताकक योजना पर ककसी पवशेर् लिए िी गई है?
ट्रदशा का प्रतततनचधत्व करने वािी रे खा जमीन पर ट्रदशा के A : Lehman s rules | िेहमैन के तनयम
समानांतर हो? B : Mechanical method | यांत्रत्रक पवचध
A : Centring the plane table | प्िेन टे बि पर C : Traversing method | रै वलसिंग पवचध
केन््ण D : Trial and error method | परीक्षण और त्रुट्रट
B : Orienting the plane table | प्िेन टे बि को पवचध
ओररएंट करना
C : Orienting by back sighting | पीछे दे खते हुए 65 : What is the name of problem? | समस्या का
ओररएंट्रटंग नाम क्या है ?
D : Orienting by magnetic needle | िुंबकीय सुई
दवारा ओररएंट्रटंग
Draughtsman Civil – Semester 2 Module 3 : Plane Table Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
66 : What is the name of method? | पवचध का 68 : Which method of plane table survey the
नाम क्या है ? figure represents? | प्िेन टे बि सवेक्षण की कौन सी
पवचध आकृतत दशायती है?
A : Resection | पवककरण
A : Bessel s method | बेस्स की पवचध B : Traversing | रै वलसिंग
B : Two point problem | दो त्रबंद ु की समस्या C : Radiation | पवककरण
C : Mechanical method | यांत्रत्रक पवचध D : Intersection | इंटर सेक्शन
D : Trial and error method | परीक्षण और त्रुट्रट
पवचध
Draughtsman Civil – Semester 2 Module 4 : Levelling and Contouring
Reviewed and updated on: 01st November 2019 Version 1.1
69 : What is the name of level designated as self C : Intermediate sight | मर्धयवती साइट
aligning level? | स्व संरेखण िेवि के रूप में नालमत D : Height of instrument | उपकरण की ऊँिाई
िेवि का नाम क्या है ?
A : Tilting level | ट्रटिट्रटंग िेवि 73 : Which branch of surveying deals with the
B : Auto level | ऑटो िेवि measurements in vertical plane? | सवेक्षण की कौन
C : Dumpy level | डमपी िेवि सी शाखा ऊर्धवायधर प्िेन में माप से संबंचधत है ?
के मार्धयम से पढे जाने वािे स्टाफ का नाम क्या है ? C : Move my right | मेरी दाएँ ओर हटो
A : Solid staff | ठोस स्टाफ D : Move my left | मेरी बाईं ओर हटो
B : Invar staff | इन्वार स्टाफ
82 : What is the process if the difference of level
C : Target staff | टारगेट स्टाफ between two points is determined by setting the
D : Telescopic staff | टे िीस्कोपपक स्टाफ levelling instrument midway between the point? |
यट्रद दो त्रबंदओ
ु ं के बीि के िेवि का अंतर त्रबंद ु के बीि
78 : What is the name of the staff 3m long and
समति साधन को तनधायररत करके तनधायररत ककया जाता
the band fitted is graduated in mm used for precise
levelling? | 3 मीटर िंबे और बैंड कफट ककए गए है तो क्या प्रकिया है?
कमयिाररयों का नाम सटीक िेवलिंग के लिए उपयोग ककए A : Simple levelling | लसंपि िेवलिंग
जाने वािे लममी में स्नातक है? B : Profile levelling | प्रोफाइि िेवलिंग
D : Linear and angular measurement | रै खखक और 93 : What is the height of collimation shown in
कोणीय माप figure with R.L 100.00 and B.S taken from A is 2.850
m? | चित्र में उपकरण की ऊंिाई क्या होगी यट्रद 100.00
89 : What dimensions are drawn in a plan of
एवं A से लिया गया B.S 2.850 m है
contour? | समोच्ि की योजना में कौन से आयाम हैं?
A : Vertical dimension | ऊर्धवायधर आयाम
B : Horizontal dimension | क्षैततज आयाम
C : Inclined dimension | ततरछे आयाम
D : Parallel dimension | समानांतर आयाम
94 : What is the purpose of using theodolite 97 : What is the name of part marked as X? | X
primarily? | मुख्य रूप से चथयोडोिाइट का उपयोग करने के रूप में चिजह्नत िाग का नाम क्या है ?
का उददे र्शय क्या है ?
A : To measure vertical angle only | केवि
ऊर्धवायधर कोण को मापने के लिए
B : To measure inclined angle only | केवि झक
ु ाव
कोण को मापने के लिए
C : To measure horizontal angle only | केवि
क्षैततज कोण को मापने के लिए A : Level tube | मेटि केस
D : To measure horizontal vertical angles | B : Metal case | िोहे का डडब्बा
क्षैततज ऊर्धवायधर कोणों को मापने के लिए C : Bubble tube axis | बबि ट्यब
ू अक्ष
95 : What is the instrument with its telescope D : Top of Telescopic axis | टे िीस्कोपपक अक्ष के
can be revolved through 180° in a vertical plane शीर्य
about its horizontal axis? | इसकी दरू बीन को उसके
क्षैततज अक्ष के बारे में एक ऊर्धवायधर पवमान में 180 ° के 98 : What is name of the component? | घटक का
मार्धयम से संशोचधत ककया जा सकता है ? नाम क्या है ?
A : Auto level | ऑटो िेवि
B : Dumpy level | डम्पी िेवि
C : Transit theodolite | रांजिट चथयोडोिाईट
D : Non-Transit theodolite | नॉन - रांजिट
A : Telescope | दरू बीन
चथयोडोिाइट
B : Dumpy level | ड्मम्पी िेवि
96 : What is the name of the part marked as X? C : Wye(Y) level | वाय (Y) िेवि
| The X के रूप में चिजह्नत िाग का नाम क्या है ? D : Cooke s level | कुकीस िेवि
A : Prolonging line by first method | पहिी पवचध 104 : what is the technical term for the process
of bring the vertical axis of theodolite immediately
दवारा प्रोिोंचगंग िाइन
over a mark or station point? | थ्रेडोिाइट की
B : Prolonging line by second method | दस
ू री
ऊर्धवायधर धुरी को ककसी तनशान या स्टे शन त्रबंद ु पर िाने
पवचध दवारा प्रोिोंचगंग िाइन
की प्रकिया के लिए तकनीकी शब्द क्या है ?
C : Prolonging line by third method | तीसरी पवचध
A : Cantering | केन््ण
दवारा प्रोिोंचगंग िाइन
B : Traversing | रे वलसिंग
D : Prolonging line by fourth method | िौथी पवचध
C : Non - Traversing | नॉन - रै वलसिंग
दवारा प्रोिोंचगंग िाइन
D : Collimation | कोलिमेशन
101 : What is the method of precisely the
horizontal angle from a single station point can be 105 : What is the term for rotating the
telescope in horizontal plane about its vertical axis?
measured? | ककसी एकि स्टे शन त्रबंद ु से क्षैततज कोण
| अपनी ऊर्धवायधर अक्ष के बारे में क्षैततज पवमान में दरू बीन
को सटीक रूप से ककस पवचध से मापा जा सकता है?
को घुमाने के लिए क्या शब्द है?
A : Reiteration method | रररे शन पवचध
A : Cantering | केंट्रद्रत
B : Recipetation method | रे लसपपटे शन पवचध
B : Revolution | ररवो्यश
ू न
C : Radial method | रे डडयि पवचध
C : Swing | जस्वंग
D : Off set method | ऑफसेट पवचध
D : Sighting | साइट्रटंग
102 : What is the deflection angle that the angle
106 : Which method errors due to eccentricity
measured in clockwise direction? | पवक्षेपण कोण
of the spindles are eliminated by reading both the
क्या है जो कोण को दक्षक्षणावतय ट्रदशा में मापा जाता है ? Vernier of the theodolite? | जस्पजन्ड्रि की इसेनरीलसटी
A : Left deflection angle | बायां पवक्षेपण कोण के कारण कौन सी पवचध त्रट्रु टयां चथयोडोिाइट के दोनों
B : Right deflection angle | दांया पवक्षेपण कोण वतनययर को पढने से समाप्त हो जाती हैं?
C : Vertical deflection angle | ऊर्धवायधर पवक्षेपण A : Ordinary method | साधारण पवचध
कोण B : Repetition method | पन
ु रावपृ त्त पवचध
D : Horizontal deflection angle | क्षैततज पवक्षेपण C : Recitation method | रे लसटे शन पवचध
कोण D : Compound method | संयुक्त पवचध
103 : What is the name of theodolite with one 107 : What is the name of traversing that is
of its telescope cannot be revolved through 180° in used for running survey lines of a closed or open
a vertical plane about its horizontal axis? | अपने survey? | रै वलसिंग का नाम क्या है जो एक बंद या खुिे
टे िीस्कोप में से एक के साथ चथयोडोिाइट का नाम क्या सवेक्षण की सवेक्षण िाइनों को ििाने के लिए उपयोग
है , इसके क्षैततज अक्ष के बारे में एक ऊर्धवायधर प्िेन में 180 ककया जाता है ?
° के मार्धयम से घूम नहीं सकते हैं? A : Chain surveying | िैन सवेक्षण
Draughtsman Civil – Semester 2 Module 5 : Theodolite Surveying
Reviewed and updated on: 01st November 2019 Version 1.1
B : Prolonging a line by 2nd method | दस उपयोग ट्रदशा तय करने के लिए ककया जाता है ?
ू री पवचध
दवारा प्रोिोंचगंग िाइन A : Chain traversing | िेन रे वलसिंग
C : Prolonging a line by 3rd method | तीसरी पवचध B : Compass traversing | कम्पास रै वलसिंग
D : Prolonging a line by 4th method | िौथी पवचध D : Plane table traversing | प्िेन टे बि की रे वलसिंग
126 : What is the name of carpentry joints? | A : Shouldered housed joint | शो्डरड हाउस जो़ि
कारपें टरी जो़िों का नाम क्या है ? B : Housed joint | हाउस जो़ि
C : Mitred rebated joint | माइटर हाउस जो़ि
D : Dovetailed housed joint | डवटे ्ड हाउस जो़ि
D : Mitred and Rebated joint | माइटर एंड ररबेटेड एक फ्रेम के ऊर्धवायधर सदस्य के साथ एक दरवाजा या
B : Coloumb | कुिाम्ब
C : Volt/Second | वो्ट/सेकंड
D : Ampere/Second | एम्पीयर / सेकंड
159 : What is the name of floor? | मंजजि का A : Ceiling joist | सीलिंग जोइस्ट
नाम क्या है ? B : Wall plate | वॉि प्िेट
C : Common rafter | कॉमन राफ्टर
D : Herring Bone strutting | हे ररंग बॉन स्रट्रटंग
िोडडंग जस्थतत के लिए R.C.C ऊपरी मंजजि में पसंद की B : Sand filling | सेण्ड कफलिंग
175 : What is the thickness of plain cement 179 : Which floor is used for surface subjected
concrete laid for the brick floor? | ईंट फशय के लिए to heavy wear like dairies and hospital? | डेयररयों
सादे सीमें ट कंिीट की मोटाई क्या है ? और अस्पताि जैसे िारी पवयर के लिए ककस मंजजि का
उपयोग ककया जाता है?
A : Granolithic floor | ग्रैनोलिचथक फशय
B : Asphalt floor | डामर का फशय
C : Terrazzo floor | टे राजो फशय
D : Cement concrete floor | सीमेंट कंिीट का फशय
A : Tread | रे ड
B : Riser | राइजर
C : Handrail | हे ण्ड रे ि
189 : What is the combined framework of
D : Newel post | नेवि पोस्ट handrail and baluster in a stair? | एक सीढी में रे लिंग
और बोिेस्टर की संयक्
ु त रूपरे खा क्या है ?
186 : What is one end or both ends corners cut
in plan of a step? | ककसमें एक कदम के प्िान में एक A : Barrister | बोिेस्टर
B : Going | गोइंग
C : Tread | रे ड
D : Riser | राइजर
A : Open Newel stair | ओपन नेवेि सीढी B : Half turn stair | आधा मो़ि सीढी
B : Geometrical stair | ज्यालमतीय सीढी C : Quarter turn stair | क्वाटय र मो़ि सीढी
सीढी
197 : What is the name of stair? | सीढी का नाम
D : Doglegged stair | डॉग िेग्ड सीढी
क्या है ?
207 : Which rafter support extend from eaves to 211 : What is the name of part marked as X? | X
ridge? | कौन सा राफ़्टर इब्ि से ररज तक सहारा प्रदान के रूप में चिजह्नत िाग का नाम क्या है ?
करती है
A : Valley rafter | वेिी राफ़्टर
B : Ridge rafter | ररज राफ्टर
C : Common rafter | कॉमन राफ्टर
D : Principle rafter | मुख्य राफ्टर
A : Corbel | कोबेि
B : Corvice | कोरवाइस
C : Blocking stone | ब्िोककं ग स्टोन
D : Wall plate | वॉि प्िेट
A : Barrel vault shell roof | बैरि वॉ्ट सेि छत 226 : Which flat roof is provided with tie rod? |
B : Bowstring steel roof | बोजस्रं ग स्टीि छत टाई रॉड के साथ ककस फ्िैट की छत प्रदान की जाती है ?
D : Wall plate | वॉि प्िेट 239 : Which roof is useful that is provided on
circular brick? | कौन सी छत उपयोगी है जो व्र्त्त्ताकार ईंट
235 : Which truss consists of wooden member
पर प्रदान की जाती है?
and steel or wrought iron member? | ककस रस में
A : Barrel vault shell roof | बैरि वॉ्ट सेि छत
िक़िी के सदस्य और स्टीि या िोहे के सदस्य होते हैं?
B : Steel frame dome | स्टीि का फ्रेम गुंबद
A : Truncated truss | टृंकेटे ड ट्र्स
C : Belfast roof | बेिफास्ट छत
B : Composite truss | कंपोजजट रस
D : Bowstring roof | धनुर्ाकार छत
C : Compound truss | संयुक्त रस
D : King and queen post truss | ककं ग और क़्वीन 240 : What is the name of part marked as X? | X
पोस्ट ट्र्स के रूप में चिजह्नत िाग का नाम क्या है ?
242 : What is the centre-to-centre distance of 219:A; 220:B; 221:A; 222:C; 223:C; 224:D; 225:D;
battens in Bengal Terrace roof? | बंगाि टे रेस छत में 226:D; 227:B; 228:C; 229:C; 230:A; 231:A; 232:B;
233:A; 234:A; 235:B; 236:C; 237:A; 238:D; 239:A;
केंद्र-से-केंद्र की दरू ी क्या है ?
240:A; 241:C; 242:A; 243:B;
A : 15 cm
B : 20 cm.
C : 25 cm
D : 30 cm
ANSWERS :
1:D ; 2:C; 3:A; 4:C; 5:D; 6:D; 7:D; 8:C; 9:D; 10:A; 11:B;
12:D; 13:D; 14:D; 15:A; 16:D; 17:A; 18:D; 19:C; 20:B;
21:C; 22:D; 23:A; 24:D; 25:A; 26:D; 27:B; 28:C; 29:A;
30:B; 31:C; 32:D; 33:C; 34:A; 35:C; 36:A; 37:D; 38:A;
39:C; 40:D; 41:A; 42:C; 43:C; 43a:B; 43b:B; 43c:C;
43d:A; 43e:A; 44:D; 45:D; 46:A; 47:C; 48:A; 49:A;
50:A; 51:A; 52:D; 53:B; 54:C; 55:A; 56:A; 57:C; 58:D;
59:C; 60:B; 61:B; 62:D; 63:C; 64:B; 65:B; 66:D; 67:B;
68:C; 69:B; 70:A; 71:D; 72:B; 73:B; 74:D; 75:B; 76:B;
77:D; 78:B; 79:C; 80:B; 81:C; 82:A; 83:C; 84:B; 85:A;
86:C; 87:B; 88:D; 89:B; 90:B; 91:D; 92:A; 93:C; 94:C;
95:C; 96:B; 97:C; 98:A; 99:B; 100:C; 101:A; 102:B;
103:D; 104:A; 105:C; 106:A; 107:C; 108:A; 109:C;
110:B; 111:D; 112:B; 113:B; 114:A; 115:C; 115a:C;
115b:B; 116:B; 117:C; 118:B; 119:B; 120:A; 121:A;
122:C; 123:A; 124:B; 125:A; 126:B; 127:C; 128:D;
129:B; 130:A; 131:C; 132:A; 133:A; 134:C; 135:C;
136:B; 137:D; 138:A; 139:C; 140:A; 141:C; 142:B;
143:A; 144:C; 145:B; 146:C; 147:A; 148:B; 149:D;
150:B; 151:D; 152:C; 153:C; 154:A; 155:D; 156:C;
157:A; 158:D; 158a:D; 159:D; 160:D; 161:C; 162:D;
163:B; 164:B; 165:C; 166:C; 167:B; 168:B; 169:C;
170:A; 171:C; 172:A; 173:A; 174:D; 175:B; 176:D;
177:B; 178:C; 179:B; 180:B; 181:B; 182:D; 183:B;
184:D; 185:D; 186:B; 187:D; 188:C; 189:A; 190:A;
191:B; 192:A; 193:B; 194:D; 195:B; 196:A; 197:C;
198:D; 199:D; 200:B; 201:B; 202:C; 203:A; 204:A;
205:C; 206:A; 207:C; 208:C; 209:A; 210:B; 211:C;
212:C; 213:B; 214:B; 215:A; 216:B; 217:B; 218:D;