Professional Documents
Culture Documents
2004
Manufacturer: CONDAT CORPORATION MATERIAL SAFETY DATA Effective: 01.Jul.2004
HMCS ID: 1182547 SHEET Print Date: 06.Jun.2005
SUC: 04 - Metal Working Fluids and Lubricants Page: 1 of 4
= 302 F COC.
Explosive Limits:
Upper Explosive Limit Not
(UEL) Determine
d
Lower Explosive Limit Not
(LEL) Determine
d
Autoignition Temperature:
Not
Determine
d
Extinguishing Media:
Water fog, alcohol foam or carbon dioxide.
Fire and Explosion Hazards:
May react with oxidizers
Special Fire Fighting Procedures:
Use self-contained breathing apparatus for enclosed areas. Use water to cool fire exposed containers. Remove containers from fire area if
possible. Use protective clothing.
6 ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK PROCEDURES
Recovery:
Stop spill at source. Dike and contain with absorbent material. Discard into a covered metal container, label as waste for disposal.
7 HANDLING AND STORAGE
HANDLING
Safe Handling Procedures:
Do not smoke or eat while handling this substance. Keep container tightly closed when not in use. Avoid strong oxidizers. Always maintain
good housekeeping and hygienic practices. OTHER PRECAUTIONARY MEASURES: Avoid breathing mist. Avoid prolonged or
repeated skin contact. Avoid eye contact. Avoid ingestion. Do not smoke or eat while handling chemicals. Wash thoroughly after handling
concentrate. Remove contaminated clothing and launder before reuse. Always use good hygienic practices.
STORAGE
Storage Conditions:
Store away from incompatible materials.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
VENTILATION: Good general ventilation under normal working conditions. Local exhaust ventilation if misted. ENGINEERING
CONTROLS: No special requirements.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment (PPE):
Eye Protection Safety glasses with splash shield or chemical goggles
recommended.
Skin Protection Waterproof gloves or chemical resistant rubber gloves are
recommended when handling concentrate.
Respiratory No special protection needed under normal use conditions.
Protection
General OTHER PROTECTIVE EQUIPMENT: No special
Protection protection needed under normal use conditions.
Hygiene Measures:
Always maintain good housekeeping and hygienic practices.
9 PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Physical State: Liquid
Comment:
APPEARANCE: N/A.
PHYSICAL PROPERTIES
pH Value:
Prod.Name: SEN 60 Revision: 01.Jul.2004
Manufacturer: CONDAT CORPORATION MATERIAL SAFETY DATA Effective: 01.Jul.2004
HMCS ID: 1182547 SHEET Print Date: 06.Jun.2005
SUC: 04 - Metal Working Fluids and Lubricants Page: 3 of 4
Concentrate N/A
N/A Use dilution.
Changes of State:
Boiling Point N/A
Vapor Pressure:
Not
Determin
ed
Vapor Density:
Not
Determine
d
Evaporation Rate:
< 1.0 Water = 1.0
Specific Gravity:
= 7.15 lb/gal.
Solubility:
In Water = Nil.
10 STABILITY AND REACTIVITY
STABILITY INFORMATION
Stability Under Normal Conditions: Stable
Conditions to Avoid:
Sparks, open flame or high temperature.
Incompatible Materials:
Strong acids. Oxidizing agents.
Hazardous Polymerization:
Will not occur. POLYMERIZATION CONDITIONS TO AVOID: Polymerization will not occur.
HAZARDOUS DECOMPOSITION
Reactions:
Type of Reaction Reaction Products
Decomposition Carbon monoxide, carbon dioxide, oxides of sulfur and asphyxiants.
11 TOXICOLOGICAL INFORMATION
CLASSIFICATION OF INGREDIENTS
Carcingenicity:
INGREDIENTS LISTED AS CARCINOGEN OR POTENTIAL CARCINOGEN PER NPT, IARC OR OSHA: No known carcinogenic
ingredients present.
Mutagenicity:
Not Available.
Tumorigenicity:
Not Available.
Reproductive Effects:
TETRATOGENICITY: Not Available.
Allergen Or Sensitivity:
ALLERGEN STUDIES: Not Available.
12 ECOLOGICAL INFORMATION
ENVIRONMENTAL IMPACT
Comment:
No negative ecological impact expected.
ECOTOXICITY
Comment:
ECOTOXICOLOGY DATA: N/A.
13 DISPOSAL CONSIDERATIONS
Waste Disposal Information:
Reclaim and incinerate or bury in a secured landfill. Dispose of in a manner consistent with state, provincial, local and federal disposal
regulations.
14 TRANSPORT INFORMATION
Prod.Name: SEN 60 Revision: 01.Jul.2004
Manufacturer: CONDAT CORPORATION MATERIAL SAFETY DATA Effective: 01.Jul.2004
HMCS ID: 1182547 SHEET Print Date: 06.Jun.2005
SUC: 04 - Metal Working Fluids and Lubricants Page: 4 of 4