Professional Documents
Culture Documents
Pages
Boat’s outside
3
to
91
Inside the boat
92
to
275
Electrical, Lighting & Electronics
276
to
431
Around the engine
432
to
524
Boat care & Safety
525
to
595
FORTRESS
In test after test, from coast to coast and from around the world, no anchor in history has been called “The World’s Best Anchor” by
more boaters and respected marine experts than Fortress ... and for good reason.
Anchors
Years of research and development, high-tech materials and manufacturing, and thousands of real world tests are your assurance of
performance, quality and value. Fortress weighs only half as much as heavier steel anchors and yet outperforms them all.
All Fortress Anchors feature Mud Palms designed to help the anchor set faster in any type of sea bottom. Mud Palms create a “lift” to
the crown of the anchor, causing the flukes to point more directly to the seabed. This helps the anchor set faster in any bottom.
GUARDIAN ANCHORS
The Guardian is the safer, more affordable alternative to heavy steel anchors.
Kg A B C
Ref.: 061090 2 560 360 460
Ref.: 061091 2,7 640 380 510
Ref.: 061092 3 640 380 510
Ref.: 061093 6 840 480 690
Ref.: 061094 8 970 560 790
Ref.: 061095 13 1090 640 890
Ref.: 061096 19 1220 710 990
Kit with: Guardian anchor 1,1Kg, chain,anchoring rope, shackle and storage bag.
COMANDO KIT
Perfect for small or auxiliar boats and as spare anchor. Ref.: 061100
3
ULTRANCHOR
Always lands in the attack position. Instantly buries deep and holds firm in unfavourable weather
conditions. Does not release in a changing wind or tide.
Anchors
max. boat
weight (TN) Kg A B C
FOLDING ANCHORS
Kg A Eye Ø
Ref.: 061101 2,5 360 10
Ref.: 061102 3,2 400 10
Ref.: 061103 4 460 10
Ref.: 061104 6 550 12
Ref.: 061105 8 600 12
Galvanised steel.
Ref.: 061106 10 630 12
Ref.: 700266 12 670 12
4
ULTRA TRIP HOOK
Ultra trip hook helps to rescue your anchor when it is locked by another one.
Anchors
316 Stainless steel.
Ref.: 060789
SUPREME GALVANISED
The design brief given was to create the highest holding, fastest setting, fixed shank anchor in the world. A surprise bonus design feature was
that the anchor was developed with a dual operation shank to enable use in rock and coral seabed types.
The anchor has been reviewed by Lloyd’s Register EMEA and it received a SHHP status, Super High Holding Power.
Dual Shank Anchoring: Twin slots enable use in all seabed types. Using the rockslot in rocky or coral sea floors means that if the anchor
becomes snagged, the shackle can slide forward and simply lift forward, removing the need to use a trip line or change anchors.
The sandslot is ideal for sand, mud, weed and grass conditions. This slot
is the recommended attachment for anchoring in extreme wind conditions.
Strengthened Shank: High tensile steel shank, the strongest available of all
anchors.
Bow Roller Compatibility: Made to conform to all standard bow roller fittings
and will also fully self-launch.
Roll Bar: Ensures the anchor always rolls itself to adopt the correct setting
position.
Winglets: Lateral flaps enable the anchor to set perfectly the first time for
an immediate set.
Spear head: Assist the anchor to pierce the toughest floors the sea has to offer.
Length (ft) Kg A B C D E
15-22 4,5 430 260 275 310 175 Ref.: 061130
18-30 6,8 470 285 310 350 195 Ref.: 061131
25-35 11,3 550 350 360 415 235 Ref.: 061132
35-40 15,8 620 360 415 465 265 Ref.: 061133
40-45 20,4 685 410 460 520 295 Ref.: 061134
45-55 27,2 750 450 485 570 315 Ref.: 061135 C
50-60 45,4 905 525 560 575 370 Ref.: 061136 E
65-75 56,7 960 400 715 620 600 Ref.: 061137
75-90 79,4 1075 455 780 685 675 Ref.: 061139 D B
BOSS GALVANISED
This new anchor (your ultimate safety device) has been designed to operate in all seabeds, a truly multipurpose anchor. The shank has also
been specifically designed for powerboat bow roller conformity. The patented features, design and robust construction make it set immediately
and hold during the worst of conditions.
Brand new patented Manson Shackle Preventor™: The Manson Boss has
one slot in the shank with two docking stations to enable you to use your
anchor in all seabeds. The patented Preventor quickly unscrews and docks
on the alternate station to transform the anchor from a fixed shank to a
sliding shank for operation in foul ground. The Preventor is captive which
means you won’t lose it.
Shank Optimisation: Shank is optimised for maximum strength.
Made from Lloyd’s Register certified high tensile steel. Shank clearance
streamlined to conform to Powerboat fairleads and bow rollers.
Roller Flaps/Trim Flaps: Ensure the fastest set in even the most demanding
seabed conditions, and deeper setting than other new generation anchors.
Double reinforced nose: Focused nose biased tip weight concentration enabled
by double thickness laminate layer (DTLL) technology for fastest set possible.
Length (ft) Kg A B C D E
15-22 4,5 620 330 291 334 212 Ref.: 061140 C
18-30 6,8 693 378 333 377 244 Ref.: 061141
25-35 11,3 839 457 404 457 295 Ref.: 061142 B
35-40 15,8 944 515 452 514 332 Ref.: 061143
5
ANCHOR-ROLL
Thanks to the roll-up mechanism AnchorRoll self-adjusts to the water depth and
thus always floats directly above the anchor position.
AnchorRoll is also an anchor retrieval support if that gets stuck on the ground the
Ropes
very strong Dyneema cord (1,5mm diameter – BL: 230 kg) can be used as a trip
line.
The orange cover makes AnchorRoll clearly visible, avoiding dangerous docking
manoeuvres by other vessels.
Ref.: 020007 With build-in grab and two Velcro fastener at the top, can be attached easily and
safety to every stainless steel rail on the ships bow.
Water depth: up to 12 m.
s
JACK BOAT HOOK
e e b o at hook
S
DERS
on FEN
6
Mooring ropes
REQUEST INFORMATION
ELONGATION
10% 20% 30% By meters
mm Strength average
0,46% 0,70% 0,96%
48 156Tn Ref.: 402001
After 50 cycles at % of break
strength. 52 187Tn Ref.: 402002
7
“Superstrong” Mooring rope
Superstrong is the highest strength dock and anchor line offered by Samson.
Mooring ropes
FEATURES
By meters Composition: Nylon / Nylon
Construction: Double braid
mm Strength average mm Strength average Specific gravity: 1,14
6 1,6Tn Ref.: 400221 18 8,5Tn Ref.: 400225
ELONGATION
9 2,2Tn Ref.: 400222 22 13Tn Ref.: 400226
10% 20% 30%
12 3,9Tn Ref.: 400223 24 16Tn Ref.: 400227
3% 5,30% 6,70%
16 6,9Tn Ref.: 400224
After 50 cycles at % of break
strength.
FEATURES
Composition: Nylon / Nylon
By meters Construction: Double braid
Specific gravity: 1,14
mm Strength average Black Navy
9 2Tn Ref.: 400201 Ref.: 400211
12 3,5Tn Ref.: 400202 Ref.: 400212 ELONGATION
16 6,3Tn Ref.: 400203 Ref.: 400213 10% 20% 30%
18 8,3Tn Ref.: 400204 Ref.: 400214 3,50% 5,60% 8,50%
22 12,2Tn Ref.: 400205 Ref.: 400215 After 50 cycles at % of break
24 15,3Tn Ref.: 400206 Ref.: 400216 strength.
8
“DC Gard” Chafe protection
Chafe protection
DC Gard is a tightly braided cover construction with Dyneema fiber that is spliced
onto the strength member to protect it from wear and abrasion in specific areas.
Designed for use in applications like tug operations, where frequent handling and
use put a premium rope protection and resistance to snagging. For vessels where
frequent mooring operations are norm, DC Gard provides maximum protection
for working ropes.
FEATURES By meters
- Lightweight and flexible.
mm
Composition: Dyneema® - Easy inspection without removal.
Construction: Single braid 32-44 Ref.: 403011
- Cut resistant.
Specific gravity: 0,98 (Floats) - Superior durability. 46-60 Ref.: 403012
Saturn Dynalene is a unique product that protects the strength member for abra-
sion, yet allows the rope to be easily inspected for both internal and external fiber
wear. This chafe protector is made from cut and abrasion resistant Dyneema fi-
ber with Samson´s propietary Saturn coating to anhance abrasion resistance and
reduce operating temperatures. Saturn Dynalene is permanently spliced over
the rope and acts as a sacrifical cover, protecting it from abrasion and wear in
mooring, tug and offshore applications. Saturn Dynalene is fully repairable in the
field, does not absorb water, and floats. It is easy to install anywhere on the rope.
FEATURES By meters
- Lightweight and flexible.
Composition: Dyneema® - Easy inspection without removal. Rope mm Size
Composition: Single braid - Superior durability. 44-72 L Ref.: 403001
Specific gravity: 0,98 (Floats)
By meters
FEATURES Rope mm Size
18-24mm 2 Ref.: 403025
Composition: Nylon - Economical
24-36mm 3 Ref.: 403026
Construction: Tubular - Durable
40-52mm 4 Ref.: 403027
9
“MLX” Racing rope
Racing ropes
Designed for the racer, but also suitable for the performance-oriented crui-
ser, MLX is a double braid construction that incorporates a Dyneema core
with a polyester cover. MLX is a ligthweigth core-dependent line that has
excellent stregth and low stretch. The core is Samthane coated to match
the color of the cover, making the line strippable for greater weigth savings.
FEATURES
Composition: Dyneema® / Polyester
Composition: Double braid
Specific gravity: 1,14
- High strength.
By meters - Low stretch.
- Lightweight.
FEATURES
Composition: Dyneema®-Vectran / Polyester
Construction: Core-dependent double braid
Specific gravity: 1,28
10
“WARSPEED II” Racing rope
Racing ropes
The stregth member in the double braid is 100% Dyneema, with a flexible
24-strand polyester cover. Strip the cover to save weigth.
Ideal for sheets and halyards, as well outhaul, boom vang, spinnaker guy
and all of the control lines.
FEATURES
Composition: Dyneema® SK78 / Polyester
Construction: Core-dependent double braid
Specific gravity: 1,2
LASH IT! / ZING IT! has been called ´The sailor´s duct tape´because of its multiple
uses on any sailboat. A single braid made from Dyneema fiber with Samthane
urethane coating, LASH IT! / ZING IT! offers a high strngth-to-weight ratio: it is
stronger than steel, so light it floats, and does not absorb water. LASH IT! / ZING
IT! comes in 56,86m easily dispensed from a plastic tube.
Splicing kit
Ref.: 403060
11
Samson uses 100% Dyneema® fiber,
the same strength as the steel wire, with
1/7 of its weight.
G40 GALVANISED CALIBRATED CHAINS
Galvanised steel grade 40 chain. Hot dipped galvanised.
Zinc thickness: 80-100µm on 6 to 12mm chains - 140µm on 13 to 16mm chains.
Chains
C
CHAIN MARKERS
13
X1
Vertical windlasses
With drum or without drum
Windlasses
Spare parts Magnet and sensor Ref.: 044132 Nut Ref.: 044130
PROJECT 1000
Vertical windlasses
With drum or without drum
Luxury chrome bronze base and drum
Rope and chain combination gipsy
Manual chain release
Independent gipsy and drum operation mm
Chain counter pre-setting as standard
Heavy duty electric motor. IP67
Supplied with control box
V W A Max pull Lift working load Hauling speed Drum Chain Ø Rope Ø
Ref.: 044053 12 1000 117 1000kg 150kg 25-45m/min No 8mm 14-16mm
Ref.: 044040 12 1000 117 1000kg 150kg 25-45m/min Yes 8mm 14-16mm
X2
Vertical windlasses
With drum or without drum
Luxury chrome bronze base and drum
Rope and chain combination gipsy
Manual chain release
Independent gipsy and drum operation
Chain counter pre-setting as standard mm
Spare parts Magnet and sensor Ref.: 044132 Stripper Ref.: 044146
14
X3
Vertical windlasses
Windlasses
With drum or without drum
Luxury chrome bronze base and drum
Rope and chain combination gipsy
Manual chain release
Independent gipsy and drum operation
Chain counter pre-setting as standard.
Heavy duty electric motor. IP66
mm Supplied with control box
V W A Max pull Lift working load Hauling speed Drum Chain Ø Rope Ø
24 1700 68 1600kg 200kg 15-32m/min No 12mm - Ref.: 044042
24 1700 68 1600kg 200kg 15-32m/min Yes 10mm 14-18mm Ref.: 044041
Spare parts Finger Ref.: 044134 Magnet and sensor Ref.: 044132
BAITRA,
AUTORISED TECNICHAL SERVICE
15
DORADO
Horizontal windlasses
Windlasses
KOBRA
Horizontal windlasses
Marine aluminium anodised body
Independent gypsy and drum operation
Manual chain release
Manual override
Heavy duty rated IP66 electric motor mm
ATLAS
Horizontal windlasses
Marine aluminium anodised body
Rope and chain combination gypsy
Manual chain release
Chain counter pre-setting as standard
Supplied with control box
mm
CAYMAN
Horizontal windlasses
Marine aluminium anodised body, white
polyester coating
Manual chain release
Manual override
Independent gypsy and drum operation
Heavy duty rated IP66 electric motor mm
Supplied with control box
On request: 6 or 10mm chain gypsy
16
TIGRES
Horizontal windlasses
Windlasses
Marine aluminium anodised body
Independent gypsy and drum operation
Manual chain release
Manual override
mm Heavy duty rated IP66 electric motor
Supplied with control box
FALKON
Horizontal windlasses
Marine aluminium anodised body,
white polyester coating
Independent gypsy and drum
operation
Manual chain release
mm Manual override
Heavy duty rated IP66 electric motor
Supplied with control box
Spare parts
Springy Ref.: 044140 Shaft Ref.: 044129
TITAN
Horizontal windlasses
Marine aluminium anodised body,
white polyester coating.
Independent gypsy and drum operation
Manual chain release. Manual override.
Heavy duty rated IP66 electric motor.
mm
17
401
Horizontal windlasses
Recommended for boats up to 18m
Windlasses
1201
Horizontal windlasses
Recommended for boats up to 30m
Polyurethane based marine painted special
aluminium alloyed light and long life body, alloyed
bronze gypsy and drum. If requested, steel or
polished AISI 316 gypsy and drum option is available
Manual chain release
Emergency manual override
DIN766 or Q2 STUD-LINK chain gypsies
1202
Horizontal windlasses
Recommended for boats up to 30m
Polyurethane based marine painted special
aluminium alloyed light and long life body, alloyed
bronze gypsy and drum. If requested, steel or
polished AISI 316 gypsy and drum option is available
Manual chain release
Emergency manual override
DIN766 or Q2 STUD-LINK chain gypsies
18
DZC 1700
Horizontal windlasses.
Recommended for boats up to 40m.
Windlasses
Gypsies are equipped with both clutch and brake to allow maximum flexibility of
operation.
Polyurethane based marine painted galvanised steel body, alloyed bronze gypsy
and drum. If requested, steel or polished AISI 316 gypsy and drum option is
available.
Two different hydraulic control options; locally over the body or bridge control.
Hydraulic power can be provided from a main engine driven (dog / magnetic
clutch or live P.T.O.) or an electric motor driven power unit
Drum can be operated separately by the practical hand brake
Alternate current electric motor option is available
AC driven models are fitted with torque limit
14-16-18mm DIN766 chain or 12,5-14-16mm Stud-link gypsies
DZC 1400
Vertical windlasses
Recommended for boats up to 30m
Epoxy coated gear box, alloyed bronze, steel or polished AISI 316 gypsy and drum
options are available
Manual chain release
Hydraulic power can be provided
from a main engine driven or an
electric motor driven power unit
19
CHAIN STOPPERS DZS
Chain stoppers and compressors protect windlasses from unnecessary load and strain.
When the anchor is stowed, devil’s claw helps to decrease the tension on the chain with
Windlasses
the help of brake wheel. It also acts to guard the moving chain and provides an elegant
look in keeping with the windlass.
Chain stoppers/compressors integrated with devil’s claw suit to chains beginning from 14
mm and are manufactured from mirror polished AISI 316L stainless steel.
(On request)
WINCHES CAPSTAN
mm
20
WINCHE CD2400
Vertical winch
Low speed “grunt” for controlled hauling
Windlasses
Low battery drain per operation
Auto-brake, holds safely
Fits any deck thickness
Marine aluminium anodised base, with chrome bronze/manganese drum.
21
PANEL SWITCH FOOT SWITCH WITH LID
Windlass accessories
V A
22
WIRELESS REMOTE CONTROL REMOTE CONTROL
Radio-frequency kit.
Wire length 4,5m
Windlass controls
433,92 MHz 10-30V
Dimensions:
Remote unit and control box.
40x20x135mm
2 CHANNELS Ref.: P104816
Ref.: 700063
4 CHANNELS Ref.: P104817
WIRELESS HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTER AA710
All the features of the AA570 plus options to control a bow thruster or deck lights and anchor wash.
High level wireless transmission security - 2.4GHz ISM band. Hand held controller displays rode
count plus signal strength and battery level. Water resistant to IP67. Console requires two AA
batteries. Rubber moulding for grip and non slip protection. Ergonomic shape with wrist strap
connector. Console holder and protective cover. Shockproof. EEE 802.15.4 compliant.
Includes: hand held remote control, base station, sensor and magnet. Ref.: 044158
23
STAINLESS STEEL BOW ROLLER 100 BOW ROLLER 160
Aluminium-Magnesium
(Al-Mg35)
Bow rollers
Ref.: 160146
A B C
Ref.: 160161 390 56 330
Ref.: 160162 458 87 365
Ref.: 160163 505 72 420
Ref.: 160164 589 97 500
Ref.: 160150
Ref.: 160145
A B C
Ref.: 160165 473 137 267
Ref.: 160166 520 178 267
24
STRAIGHT SHACKLES CHAIN LINKS
Stainless steel
25
Mooring systems
¿WHAT IS ONESAILOR?
A SOLUTION
Solving the problems and difficulties generated by docking and undocking manoeuvres was the reason why we crea-
ted Onesailor Docking Systems. It is an innovative docking system that fits to the dock and makes these operations
simpler. Our product range is designed for boats that dock stern-to or bow-to. The Stern Docking System was designed
to facilitate berthing stern-to. It makes berthing safer for the crew and for the boat.
NEW SYSTEM
We have created a completely new, environmentally friendly system that makes docking and undocking safer. Its
solutions and innovative design are unique. No other product on the market offers the benefits of Onesailor Docking
Systems.
CONTINUOS INNOVATION
Onesailor Docking Systems are continuously evolving. We are always immersed in R&D&i to achieve the very best
complementary solutions and adapt the system to new needs of boat owners. Our R&D&i department is working on new
products to achieve greater efficiency, safety, comfort and aesthetics. Onesailor Docking Systems has been certified
by the Tecnitas entity (Bureau Veritas) for recreational craft and small fishing vessels.
26
ONESAILOR ADVANTAGE
Mooring systems
INCREASED SAFETY
Onesailor Docking Systems are not only a solution for entering and leaving a berth; it also makes manoeuvres safer
under severe weather conditions. It protects both the boat and the dock. Its innovative design and top-quality mate-
rials make this a unique protective product.
GRADUAL BUFFERING
Another Onesailor Docking System innovation is progressive buffering that minimizes the stress when the boat hits
the dock. This is achieved through the great elongation of the EPDM profiles. No other product on the market can
match them.
One Onesailor accessory is the Mooring Spring, which softens the traction on the deck and dock cleats. It uses
compression and so achieves a long-lasting cushioning effect because there are no buffering components under
tension or torque.
NO AIR-CHAMBERS
Unlike other marine products, Onesailor Docking Systems do not contain compressed air, because the progressive
damping is achieved by elastic deformation of the EPDM profiles.
This innovation means you can leave your boat, even in winter, without worrying about air leaks in the side fenders
or whether the fixed finger or dock fenders have broken or been torn off.
MOORING SPRING
Ø Rope (mm)
18 Ref.: 060109
22 Ref.: 060110
ANCHORING SPRING
Ø Rope (mm)
18 Ref.: 060111
22 Ref.: 060112
FENDER CLIPS
Set (Units)
Height adjuster for boat fenders. Adjust and lock
1 Ref.: 060299
your boat fender in two quick and easy steps.
Suitable for any kind of boat and designed for Ø8 4 Ref.: 060300
and Ø10mm ropes.
27
BOW MOORING
The Onesailor Bow System allows a safe and easy bow docking of a
Mooring systems
boat. The skipper can do the docking manoeuvre without help from
the crew or the staff at the marina. Onesailor Bow System is suitable
for use with any kind of pontoons.
Manufactured in anodized marine aluminium, and special HPDM.
STERN MOORING
Onesailor Stern Fender FL38- Medium facilitates docking and undocking procedures when berthing
stern to. This fender´s progressive damping action permits the stern of the vessel to be safely thrust
against the pontoon whilst the ship is tied up.
Manufactured in anodized marine aluminium, and special EPDM.
28
FLOATING DOCK FENDER
Mooring systems
Length Pontoon Dimensions Model
<15m floating 170x580x280mm 002PF Ref.: 060125
>15m floating 170x580x310mm 004PF Ref.: 060128
<15m floating 170x1150x270mm 005PF Ref.: 06O126
>15m floating 170x1150x310mm 0O6PF Ref.: 06O129
Protects vessels against blows and friction on the front and top of the pontoons and fingers. It’s ideal to replace the old inflatable or
padded pontoon fenders. It can be used to do wider the Onesailor Bow berthing area.
The Swinging and Folding Roller protects the boat from knocks and scratches caused by the end of the finger peer when entering and
leaving your berth.
This fender rolls over the ship´s hull minimizing damage caused by friction in the boat vertical displacement at its mooring.
To mount in a horizontal surface.
Sold without fender cover, available in various colours.
Rolls over the ship´s hull and automatically adjusts its own orientation with the movement of the boat (be it horizontal, vertical or diago-
nally) thus reducing to a minimum any friction.
Sold without fender cover, available in various colours.
29
ROLLER FENDER FOR PILING
To mount on wood piles. Airless fender designed to roll over the ship´s
Mooring systems
The pivoting roller fender is designed to protect the boat against impact and
friction on piles and fixed timber docks.
Sold without fender cover, available in various colours.
ACCESORIES
Stainless steel (Aisi-316) T-bolt with EPDM rubber cap to cover holding
an anti-galvanic PE-HD washer. Used screws. Protects the screw from en-
on aluminium pontoons with Onesai- vironmental agressions.
lor products.
Ref.: 060398
Ref.: 060399
Stainless steel screw for concrete Universal adapter fitting for all types
structure with an anti-galvanic couple of pontoons. Stainless steel. 2 units
PE-HD washer. 4 units set. set.
30
“G SERIES” FENDERS
Made in white PVC, one piece. Longitudinal reinforcements to improve resistance
Length Ø Length Ø
Ref.: 060301 G1 330 90 Ref.: 060304 G4 585 165
Ref.: 060302 G2 405 115 Ref.: 060305 G5 685 215
Ref.: 060303 G3 510 140 Ref.: 060306 G6 760 265
Navy
MODEL UNITS Black
blue
Ref.: 060360 G1 2 Ref.:060360N
Ref.: 060361 G2 2 Ref.:060361N
Ref.: 060362 G3 2 Ref.:060362N
Navy blue Black
Ref.: 060363 G4 2 Ref.:060363N
Ref.: 060364 G5 2 Ref.:060364N
Ref.: 060365 G6 1 Ref.:060365N *
*Double layer, also available in burdeos colour ( Ref.: 060366 )
FENDER BASKETS
31
ALUMINIUM BOAT HOOKS clip s ALUMINIUM JACK BOAT HOOKS
o a t hook
See b BRACKETS
on
Fenders
Open covers
Navy blue Royal blue Black Red Fender Pack
Black Ref.: 060371 Ref.: 060371B Ref.: 060372R A1 1 u.
Ref.: 060372 Ref.: 060372A Ref.: 060372B Ref.: 060373R A2 1 u.
Ref.: 060373 Ref.: 060373A Ref.: 060373B Ref.: 060374R A3 1 u.
Ref.: 060374 Ref.: 060374A Ref.: 060374B A4 1 u.
Ref.: 060375 Ref.: 060375A Ref.: 060375B A5 1 u.
Close covers
Navy blue Black Fender Pack
Ref.: 060377 Ref.: 060378 A1 1 ud.
Red Ref.: 060381 Ref.: 060382 A2 1 ud.
Ref.: 060383 Ref.: 060384 A3 1 ud.
Ref.: 060388 Ref.: 060389 A4 1 ud.
Ref.: 060392 Ref.: 060393 A5 1 ud.
Navy blue
32
DOCK FENDER STATION
This bracket allows you to fix the fender in the dock, to avoid
hanging the fenders on the boat.
Made in aluminium. Mounting accessories included.
Fenders
Fits with any size of “A Series” fenders.
Ref.: 060390
Astern movements limited by: Head line (1) and aft spring (4)
Ahead movements limited by: Stern line (6) and forward spring (3)
Outside movements limited by: Forward and aft breast lines (2 and 5)
33
FOOT PUMP BR10 5L ELECTRIC PUMP BTP12
12V. 20A.
Metalic parts made of stainless 1,7m tube.
steel. Reinforced bellows. To Inflates and deflates.
Inflators
Dimensions: Dimensions:
350x250x80mm 290x100x170mm
Ref.: 089990
Ref.: 089996
34
INFLATABLE FENDERS
Inflatable fenders
Specially designed for the protection and assistance during docking.
Their large volume, combined with ease of handling and resistance, will
optimize your operations.
Thanks to their valves and flexibility, can be inflated, deflated and stored
rapidly.
mm Ref.: 060331 Ref.: 060332 Ref.: 060333 Ref.: 060334 Ref.: 060335 Ref.: 060336 Ref.: 060337
L 1070 1140 1470 740 1070 1470 1650
Ø 460 460 460 610 610 610 660
Thickness 1,2 1,2 1,2 1,2 1,2 1,2 1,2
Cover Ref.: 060341 Ref.: 060342 Ref.: 060343 Ref.: 060344 Ref.: 060345 Ref.: 060346
All sizes
mm Ref.: 060339 mm Ref.: 060338 on request
L 1250 Ø 711
Ø 800 Thickness 1,2
Thickness 1,2 Cover Ref.: 060347
Special waterproof
Stainless steel clip, traction guaranteed valve, rapid filling
35
ALUMINIUM HAWSEPIPE
Ref.: 160414
ALUMINIUM HAWSEPIPE
Ref.: 160413
ALUMINIUM HAWSEPIPE
Ref.: 160411
Ref.: 160416
Ref.: 160415
Ref.: 160417
36
HALYARD CLEATS
Anodised (10 micron) aluminium-magnesium alloy (Al-Mg5)
A B C D
82 15 17 20 Ref.: 160241
Ref.: 160242
Cleats
110 19 20 25
150 19 28 30 Ref.: 160243
255 38 48 45 Ref.: 160245
SHEERLINE CLEATS
Anodised (10 micron) aluminium-magnesium alloy (Al-Mg5)
A B C D
168 52 30 52 Ref.: 160211
205 65 40 60 Ref.: 160212
255 80 47 75 Ref.: 160213
305 80 50 78 Ref.: 160214
SHEET CLEATS
Anodised (10 micron) aluminium-magnesium alloy (Al-Mg5)
A B C D
155 32 33 47 Ref.: 160221
175 35 35 55 Ref.: 160222
200 38 37 58 Ref.: 160223
FRANCIA CLEATS
Anodised marine aluminium. Useful, economical and traditional
french aesthetic.
A B C D
160 21 30 35 Ref.: 160230
200 25 45 50 Ref.: 160231
260 32 55 65 Ref.: 160232
330 35 60 80 Ref.: 160233
37
AMERICA FOLDING CLEAT
Ref.: 160257
A B C
Ref.: 160280 155 54,7 13,5
A B C D E F
Ref.: 160260 134 110 38 12 65 46
A B C D
Ref.: 160255 150 19 51 62
Ref.: 160256 177 24 45 70
Ref.: 160253
A B C D
Ref.: 160281 152 26,5 22 120
38
ALUMINIUM RAKED BOLLARDS
ALUMINIUM BOLLARD
Ref.: 160521
Polished 316
stainless steel A B C D
95 92 50 92 Ref.: 160540
120 120 60 95 Ref.: 160541
142 140 70 118 Ref.: 160542
185 155 80 121 Ref.: 160543
Ref.: 160724
39
ALUMINIUM HANDED FAIRLEADS
Ref.: 160330
Ref.: 160321
40
SS EYE NUTS SHORT SS EYE BOLTS LONG SS EYE BOLTS
Polished 316 stainless steel Polished 316 stainless steel Polished 316 stainless steel
Superior quality Superior quality Superior quality
Eye bolts
B
A
A
C
C A
B B
A B A B C A B C
Ref.: 060860 25 M6 Ref.: 060867 13 40 M6 Ref.: 060874 80 107 M6
Ref.: 060861 33 M8 Ref.: 060868 15 51 M8 Ref.: 060875 100 136 M8
Ref.: 060862 42 M10 Ref.: 060869 19 64 M10 Ref.: 060876 100 145 M10
Ref.: 060863 56 M12 Ref.: 060870 22 79 M12 Ref.: 060877 100 157 M12
Ref.: 060864 62 M14 Ref.: 060871 27 90 M14 Ref.: 060878 120 183 M14
Ref.: 060865 68 M16 Ref.: 060872 27 95 M16 Ref.: 060879 140 208 M16
47
10
M12
A
B
Ref.: 060866
Ø A
Polished 316 stainless steel. mm.
10 Ref.: 060811 6 47 A B C D mm.
Ref.: 060812 8 45 Ref.: 060801 100 63 3/8”-9,5 36
149 Ref.: 060814 8 55 Ref.: 060802 127 89 3/8”-9,5 36
102
Ref.: 060813 10 65 Ref.: 060803 122 76 1/2”-12,7 46
Ref.: 060873 Ref.: 060819 12 155 Ref.: 060804 161 104 1/2”-12,7 46
M12
316 Stainless steel 304 Stainless steel Hight polished 316 stainless steel.
Hooking part has Designed to hold fenders
constant torque, this
prevents accidentally
swinging. Max. load
700kg
Ref.: 060852
Ref.: 060851
Ref.: 160723
41
FENDER HOOK
Surface mount fender hook manufactured in 316 Stainless Ste-
el. Concealed fasteners.
Deckfillers
A B C
Ref.: 160727 53 32 16,5
LOCKING DECKFILLERS
Locking cap has a lid to cover the
keyhole
Comes with two keys
Electropolished 316 stainless steel
Ø
Ref.: 160782 38mm FUEL
Ref.: 160784 38mm WATER
Ref.: 160783 50mm FUEL
Ø
Ref.: 160758 38mm
Ref.: 160757 50mm
UNLEADED LEADED
FRESH WATER PETROL PETROL WASTE WATER
Ref.: 160771 Ref.: 160772 Ref.: 160773 Ref.: 160774
With Delrin
With Delrin With Delrin threaded part With Delrin
threaded part threaded part UNLEADED threaded part
DIESEL FUEL FRESH WATER PETROL WASTE WATER
42
POP-OUT FUEL Ø50MM STAINLESS STEEL DECKFILLER
Press and turn the lid to open.
Polished 316 stainless steel
Deckfillers
Emergency key
Ref.: 062419 Ref.: 160764
Spare key
Ref.: 160790 Ref.: 160766
Spare key
Ref.: 160790 Ref.: 160765
Emergency key
Ref.: 062419 Ref.: 160759
43
FUEL Ø50MM STAINLESS STEEL VENTED
DECKFILLER
Polished 316 stainless steel
Deckfillers
Ref.: 160781
Ref.: 160780
Ref.: 160769
PVC DECKFILLERS
Ø 38 Ø 51
ADAPTOR WASTE
Allows pumping-out waste water through
the deckfiller
Plastic
Ref.: 160775
44
Ø51MM ALUMINIUM DECKFILLER
Deckfillers
Labels: water, diesel, waste and fuel.
Ref.: 160753
Ref.: 160751
Key
Ref.: 062410 Ref.: 160754
Key
Ref.: 062410 Ref.: 160752
NMEA2000 DECKFILLER
Displays tank level at the deckfiller and at the
See tanks on pages 470-471 existing instrument
Prevents fuel spills during refuelling
Available with imprint “FUEL”, “DIESEL”, “GAS” or
“WATER”
Fits 50mm (2”) or 38mm (1 1/2”) hoses.
Blue LED level Display
Cast 316 Stainless Steel
See hoses on pages 472-473 Easy to install.
Single plug to NMEA2000® Bus
45
TANK VENTS TANK VENTS MT
316 stainless steel with nylon interior nut
For mounting on bulkheads from 2 to 16mm thick.
Tank vents
A B C D
STRAIGHT Ref.: 055111 16 76 35 44
ELBOW Ref.: 055112 16 70 35 44
D C A A
C
D
ELBOW A B C D E STRAIGHT
B Ref.: 055107 48 76 39 19 8-19 Ref.: 055105
TANK VENTS P-TRAP FUEL TANK VENT NYLON LOOP FOR TANK
VENT
For Ø16mm vent
Ref.: 055101
73
25
52
Adjustable Ref.: 055110 82 Ref.: 055108
32
Ref.: 055102 Helps prevent 16
fuel spills and
water entering 57
the fuel tank.
80
Certificate nº 88R30113 of Swedish Navy.
14
Hose Ø 16mm
Hose:
Ø 16mm
Ref.: 055103
Ref.: 055109
46
RECESSED STORAGE BOXES
White ABS.
Boxes
Interior:
105x345x100mm
Cut hole:
111x350. Depth 100mm
Without cover Ref.: 062443
Exterior:
395x155mm With cover Ref.: 062444
White ABS.
Interior: 105x185x100mm
Cut hole: 111x190. Depth 100mm
Exterior:
235x155 mm
Without cover Ref.: 062445
Quality enclosures for general storage
as well as to place taps, showers, With cover Ref.: 076016
deckfillers…
RECESSED BOX
White ABS.
Adjustable.
Perfect to recess deckfillers, deck
showers,
washdown outlets,...
White ABS.
Ref.: 062450
47
STAINLESS STEEL FOLDING DRINK HOLDER FOLDING DRINK HOLDERS
WHITE
Ref.: 060013
A B C D
Ref.: 060010
Sold in pairs
102
Height: 41mm Ø Dimensions
base Ø 70mm Ref.: 061645 16-32 35x19x38
70 thread Ø 25mm Ref.: 061646 25-44 50x19x54
Sold in pairs
48
FLAGSTAFF SOCKETS FLAGS FLAGSTAFF
Varnished mahogany wood with aluminium
interior Ø
Ref.: 125101 25mm
Ø35mm recessed mounting
Surface mounting 316 stainless steel
316 stainless steel
Ø interior Ø interior
FITTING KITS
Boom holder
interior Ø 100mm
1 pipe fitting is required (not included)
Ref.: 142013
Rail bracket
Ref.: 142010 Perfect to fix awnings, poles, rods,...
interior Ø 50mm
2 tube fittings are required (not included)
Boom eye
Interior: 35x41mm
1 pipe fitting is required (not included)
Ref.: 142011
49
OUTBOARD MOTOR BRACKETS OUTBOARD MOTOR RAIL BRACKET
Retractable
Stainless steel. Up to 10CV Wood varnished table with screws
for fastening on the rail
Brackets
Ref.: 041005
Stainless steel tube Ø 25mm
Stainless steel. Up to 20CV
Ref.: 041006
Ref.: 041009
Plastic plate.
Holds up to 40Kg
Sold in pairs
Ref.: 041015
50
REMOVABLE SIDE MOUNT
Rod holders
Ref.: 140109 Ref.: 140111 Ref.: 140110 Ref.: 140112
3 rods rack 2 rods rack
Ref.: 140104
30º
Ref.: 140107 30º
30º ROD HOLDER 316SS 30º ROD HOLDER WITH EYE STRAP
Ref.: 140103
30º
Ref.: 140105
30º
51
ROUND BASES OVAL BASE RECTANGULAR BASE
Rail bases
82
45
76
Polished 316 7
38
stainless steel
For welding 7
Thickness: 3mm
Polished 316 Polished 316
stainless steel stainless steel
Ref.: 145001 Ø60 For welding For welding
Thickness: 3mm Thickness: 3mm
Ref.: 145002 Ø74 Ref.: 145003 Ref.: 145004
45º A B C
45º Ref.: 145023 44 80 10 Polished 316
stainless steel
60º Ref.: 145024 44 80 9 For welding
90º Ref.: 145025 44 80 7 Thickness: 3mm
52
b r a ckets
ore
See m page 250
HANDRAIL BRACKETS on HANDRAIL BRACKETS
Handles
Base: 62x33mm Base: 64x32mm
Height: 55mm Height: 67mm
Interior Ø: 40mm Interior Ø: 25mm
HANDLES
Electropolished stainless steel.
Studded, 5/16” washers and nuts.
Fingergrip Smooth A B C
Ref.: 161020 Ref.: 161025 229 45 39
Ref.: 161021 Ref.: 161023 305 45 39
Ref.: 161022 Ref.: 161024 457 45 39
PVC HANDLE
HANDLES
Ref.: 161001 Mounting
bases
Colour: Grey
Length: 250mm
Height: 60mm
Ref.: 161030
Ref.: 161011 Ref.: 161012
TYPE I
PVC HANDLE FOR INFLATABLE BOATS
Electropolished stainless steel.
TYPE
L mm. I II
TYPE II
300 Ref.: 161002 Ref.: 161007
Colour: Black
450 Ref.: 161003 Ref.: 161008 Length: 265mm
600 Ref.: 161004 Ref.: 161009 Width: 95mm
tube Ø: 25mm Height: 60mm
For M6 bolt mounting. 750 Ref.: 161005 Ref.: 161010 Ref.: 161031
STEP PLATES
53
UNDER PLATFORM LADDER FOLDING LADDER
Ladders
65
294
Stainless steel Stainless steel
Telescopic
889 600
96
254 235
2+2 steps
Ref.: 060907
65
905 96
270
Ref.: 060909
54
TELESCOPIC LADDERS ARMSTRONG LADDER
Stainless steel 3 steps
The most comfortable and easy
Ladders
way to climb aboard, even with
scuba fins.
Easy to remove and stow
Up to 200kg
Length: 1020mm
Width: 330mm
Bracket not included
Bracket
Ref.: 060912
4 steps
Ref.: 060914
mm. A B C
3S Ref.: 060900 885 365 255
4S Ref.: 060901 1.080 390 255
3S wide Ref.: 060902 885 370 405 Ref.: 060910 3 STEPS
4S wide Ref.: 060908 990 410 395 Ref.: 060911 4 STEPS
55
PVC FENDERING PROFILES
Fendering profiles
Rigid PVC profiles are easy to fit and can offer a modern look whilst retaining the straight clean line of Aluminium. Will bend around the
average Bow and Transom bend, and also will bend downwards if the gunnel leads to a bathing platform with the application of heat.
RIGID PVC
BODIES INSERTS END CAPS
3,65 m roll unit
metres
56
ALUMINIUM PROFILES
Fendering profiles
ALUMINIUM
END CAPS INSERTS BODIES
unit roll 3,65 m
PVC PROFILES
PROFILE
Ref.: 140242
Black
END CAP
Colour Roll
Ref.: 140246
Ref.: 140266 White 1m*
Aluminium
Ref.: 140247 Black 20m Ref.: 140245 Black - metre
Ref.: 140267 Grey 21m
Ref.: 140268 Grey 25m
*Sold by meters
Ref.: 140276 Woodgrain effect Ref.: 140277 Woodgrain effect Ref.: 140278 Woodgrain effect
EDGING TRIMS
Ref.: 140250 Ref.: 140251 Ref.: 140252 Ref.: 140253 Ref.: 140254
Chrome White Black Top seal Side seal
57
BONDING SYNTHETIC TEAK
Synthetic teak
Dek-King® by Wilks is the ultimate alternative to the traditional teak boat decking we all know and love. But that’s half the problem,
teak needs a lot of love, care and attention, year on year – which means less sailing!
Our synthetic teak decking looks like the real thing – all year round. It’s easy to look after and doesn’t lose its good looks to sunlight or
harsh conditions of the marine environment.
Dek-King® can be fixed to almost any surface including GRP, Steel or Timber. Due to its very subtle textured surface exterior and
flexibility of the material you will discover that Dek-King® is impressively non-slip, even when wet.
Virtually maintenance free – can be jet washed. Manufactured from 100% recyclable material
Does not turn grey – UV stabilised outdoor grade PVC. Stain resistant – oil and wine can be removed with soap and water
Low combustibility – fire rated to EN 13501-1: 2007. Weathering tests to conditions according to RAL-GZ 716/1 (1994)
Ref.: 022016 10m coils White ‘T’ Caulking Strip Ref.: 022026
10m coils
Sealtack 750, for bond the Deck-King to the surface chosen. Available
Black ‘T’ Caulking Strip Ref.: 022006 10m coils
in 600ml tubes, with an approx. performance of 0,6m2.
Stelmax clear Sealtack 750 black
Ref.: 022010 Ref.: 022012
Stelmax black Sealtack 750 cream
Ref.: 022011 Ref.: 022013
58
WELDING SYNTHETIC TEAK
Perfect for template production. Maximum sealing.
Synthetic teak
WITH BLACK CAULKING WITHOUT CAULKING
WELDING ROD:
eld ing
o w w
N Ref.: 022211
ACCESSORIES TOOLS:
Welding gun Ref.: 022212
Cutter Ref.: 022021
Straight cutter blade Ref.: 022022
Ref.: 022206 10m coils
Curve cutter blade Ref.: 022023
Scissors with angles Ref.: 022020
Telescopic roller Ref.: 022024
Ref.: 022209 10m coils
– FINISHES –
59
...a crew at your service
Hatches
Screen Ref.: 059121 1000 244x244 270x270 340x340 Ref.: 059131 Ref.: 059136
Ref.: 059226 Ref.: 059122 1029 311x440 340x470 408x541 Ref.: 059132 Ref.: 059137
Ref.: 059227 Ref.: 059123 1070 392x392 421x421 490x490 Ref.: 059133 Ref.: 059138
Ref.: 059124 1080 440x440 467x467 540x540 Ref.: 059134 Ref.: 059139
Ref.: 059125 1039 485x485 510x510 580x580 Ref.: 059135 Ref.: 059140
Ref.: 059126 1049 612x612 640x640 706x706 Ref.: 059130
Without arms bracket - 180º opening Ref.: 059127 0649 627x627 638x638 725x725
60
VOYAGER STAINLESS STEEL HATCHES
316L Stainless steel lid. Extruded aluminium base.
Combines a mid-profile with a patented tie-down assembly.
On 2680 and 2639 Models spring arm allows hatch to open 180º.
Hatches
Opening Cut Out O.D. Lid
Trim Ring Model mm. mm. mm.
Ref.: 059223 2609 194x337 203x346 252x395 Ref.: 059220
Trim Ring
Opening Cut Out O.D. Lid
Ref.: 059143 Model mm. mm. mm.
61
SEABREEZE SHADE SCREENS
Seabreeze shade/screen is the perfect solution to keep insects and sunlight
Hatch accessories
SPARE PARTS
Telescopic arm
Riser arm Hatch Mod.:1139 Riser arm Hatch Mod.:2639 - Left Riser arm Hatch Mod.:2639 - Right 410mm 535mm
Ref.: 059177 Ref.: 059216 Ref.: 059215 Ref.: 059172 Ref.: 059183
9/16” gasket Low profile gasket Arm bracket “N” type - Left Arm bracket “N” type - Right
Ref.: 059173 Ref.: 059193 Ref.: 059195 Ref.: 059196
Bracket for MK11 tie down Telescopic arm bracket I/O cap for “P&T” type latch dog I/O cap for “N” type latch dog
Ref.: 059187 Ref.: 059188 Ref.: 059192 Ref.: 059180
Dog “K” type (not handed) I/O latch dog ass. for round hatches Latch dog “GP” type - Right Latch dog “GP” type - Left
Ref.: 059174 Ref.: 059200 Ref.: 059176 Ref.: 059175
Latch dog “P&T” type - Right Latch dog “P&T” type - Left Latch dog “N” type - Right Latch dog “N” type - Left
Ref.: 059190 Ref.: 059189 Ref.: 059171 Ref.: 059170
Hinge for round hatches - SS Hinge for alum. square hatch Stainless steel pin Mushroom cap “P&T” type
Ref.: 059194 Ref.: 059191 Ref.: 059184 Ref.: 059182
Mushroom cap “N” type Grey locking button Arm bracket “P&T” type - Left Arm bracket “P&T” type - Right
Ref.: 059181 Ref.: 059185 Ref.: 059197 Ref.: 059198
62
SLIDING ROOF HATCHES
Hatches
Manual Electric
12V
With manual handle
Ext. mm.
Model W x L
63
EXTRUDED ALUMINIUM PORTLIGHTS
MOULDED PORTLIGHTS
Moulded portlights, with an optional exterior stainless steel ring.
This value-packed portlight offers what you´d expect in a more
expensive design.
Hull thickness between 7 and 36mm.
Complete with interior trim ring and screen.
64
STAINLESS STEEL PORTLIGHTS
No visible exterior screws. Large viewing area. Deep drain angle. Adjustable quick dogs.
Complete with trim ring and screen.
Portlights
OVAL
ELLIPTICAL
RECTANGULAR
65
ALUMINIUM ALLOY PORTLIGHT MOULDED PORTLIGHTS
Portlights
{
- O.D. 233mm Model mm. mm. mm.
Ø - Cut Out 175mm
- Clear View 127mm Ref.: 059165 512-AD 100x279 140x318 198x373 White
66
FLUSH WATERTIGHT COMMERCIAL HATCHES (STEEL DECK RING)
Commercial hatches
Marine aluminium cast hatches. Watertight, designed to seal up to 10 meters intermittent head. Fast acting and easy to use.
Built-in T handle. Easy operating dogging mechanism, exert uniform force on the cover plate.
Lloyd’s Register and ABS type approvals. CE, ISO-12216 compliant.
STEEL DECK RING
C ROUGH OPENING
& RING O.D.
Neoprene gasket to replace CLEAR OPENING
A B C mm
381 447 33 Ref.: 059312 A B C mm
457 521 33 Ref.: 059313 371x594 442x673 33 Ref.: 059315
HANDLE SPILE
HINGED HATCH
A B C mm A B C mm
622x622 686x686 63 Ref.: 059317 594 673 38 Ref.: 059334 Ref.: 059352
A B C mm A B C mm
371x597 447x673 33 Ref.: 059335 622x622 686x686 63 Ref.: 059318
67
FLUSH WATERTIGHT COMMERCIAL HATCHES (ALUMINIUM DECK RING)
Commercial hatches
Marine aluminium cast hatches. Watertight, designed to seal up to 10 meters intermittent head. Fast acting and easy to use.
Built-in T handle. Easy operating dogging mechanism, exert uniform force on the cover plate.
Lloyd’s Register and ABS type approvals. CE, ISO-12216 compliant.
ALUMINIUM DECK RING RING O.D.
D ROUGH OPENING
Neoprene gasket to replace
CLEAR OPENING
Ref.: 059350 Hinge boxes not included on hatch dimensions.
A B C D mm A B C D mm
503 580 673 35 Ref.: 059305 371x594 447x676 541x770 38
Ref.: 059304 Ref.: 059306 305x457 381x533 478x630 38
A B C D mm
A B C D mm Ref.: 059323 498 579 673 43
622x622 686x686 787x787 40 Ref.: 059324 595 671 775 43
Ref.: 059329 762 851 947 43
Ref.: 059307
A B C D mm A B C D mm
Ref.: 059326 517x517 579x579 680x380 40 Ref.: 059325 371x599 447x673 549x775 38
Ref.: 059327 622x622 686x686 787x787 40 Ref.: 059331 503x666 557x730 691x824 38
HINGED HATCH
Spare key
Ref.: 059398
A B C D mm A B C D mm
Ref.: 059303 302 376 442 32 Ref.: 059328 371x599 447x673 549x775 38
68
HATCHES (STAINLESS STEEL DECK RING)
Commercial hatches
Hatches with 316 stainless steel deck ring,
316 stainless steel locks and handle and
anodized aluminum cover.
TEAK TABLES
Custom-made
69
MOULDED INSPECTION HATCHES
Inspection hatches
With key
Ref.: 059508 195x295 202x302 280x375
70
MOULDED ROUND DECKPLATES
Inspection hatches
UV stabilized resin.
“T” handle for easy operation.
Opening O.D.
mm. mm.
Opening O.D.
mm. mm. Ref.: 062423 Ø195 Ø240
Ref.: 059507 Ø145 Ø195 Ref.: 062424 Ø146 Ø191
Opening O.D.
mm. mm.
Opening O.D.
mm. mm. Ref.: 062427 Ø105 Ø145
Ref.: 062421 Ø105 Ø145 Ref.: 062428 Ø155 Ø205
Ref.: 062422 Ø150 Ø200 Ref.: 700711 Ø152 Ø205 *Negro
Opening O.D.
mm. mm.
Opaque Ref.: 062425 Ø179 Ø236
Ref.: 062503
Clear Ref.: 062504 Ø179 Ø236
71
DOOR TOGGLES
Door & Hatch hardware
ø45
80 180
75 165
BOW NUTS UNI 2403 BOW NUTS UNAV 6684 WING NUTS UNI 2402-65
BRASS HANDLES UNAV 5004 EYEBOLTS UNAV 6683 EYEBOLTS UNI 2408
72
ALUMINIUM INSPECTION DECKPLATES TANK ACCESS PLATE
Inspection hatches
Aluminium-magnesium alloy (Almag 35).
“T” handle that allows an easy operation.
Stainless steel hardware. Aluminium
Non skid surface. O.D.Ø:150mm
Cut OutØ:100mm
Opening Cut Out O.D.
Model mm. mm. mm.
Patented folding
C 4808 Ø186 Ø216 Ø265 Ref.: 059291 backing ring.
C 4810 Ø235 Ø267 Ø318 Ref.: 059292 Ref.: 118499
Ref.: 059295 Spare T handle 160x260 206x306 270x370 160 Ref.: 059297
OPENING
1123 574x277 630x330 681x381 Ref.: 059403
O.D.
CUT
1828-right Ref.: 059405 OUT OPENING
714x445 760x495 810x545
1828-left Ref.: 059406
73
Ventilation
Air-Only ventilator let air in and keep water out via the use of spherical floats.
Keeps water out under the worse adverse weather conditions, in any corner of the vessel, and even if the ventilating device is
completely under water.
Provides a constant supply of air to the cabin areas, engine rooms and holds.
Made of extremely UV-stabilized plastics: Luran S.
Ref.: 051001
AIR-ONLY
DORADO
Ref.: 051003
74
RECTANGULAR VENTS OVAL VENT
Stainless steel Polished 316 Stainless steel
Ventilation
Ref.: 051037 Ref.: 051036
Ref.: 051038
380x192mm
Stainless steel
cover with Ref.: 051040
plastic body.
ø 200
Ref.: 051080
62
ø 99
Spare case 28-47 ø 86
ø 140 380x192mm Ref.: 051050 Double side. Adjustable
Ref.: 051081
75
CLAMSHELL VENTS CLAMSHELL VENT 110
A
Ventilation
A B C 110
Stainless
steel Ref.: 051033 93 87 25 55
60
Stainless steel
145
180
A B C C
76
BIMINI TOPS
Manufactured with 100% polyester for UV and water resistance, with Ø22mm anodised aluminium frame.
Bimini tops
A B C cm
77
TERMINAL CAPS HD TERMINAL CAPS
B
Polished 316 stainless steel Polished 316 stainless steel
Bimini hardware
A B C C A B C C
A
A B
B B
C
A
C C
A B C A B C A B C
29 30 26
51 47
54
25 23 72
FORK ARTICULATED JOINTS CONCAVE BASE FORK SUPPORTS BIMINI SWIVEL JOINT
Polished 316 stainless steel Polished 316 stainless steel
Polished 316
D D stainless steel
C
C
A A Ref.: 141047
B B
A B C D A B C D 8
With anti-rattle 45
W./bolt. Ref.: 141043 61 18 36 8 W./bolt. Ref.: 141045 60 21 36 8 rubber pad 25
78
REMOVABLE BASE TUBE BASE
A A
BALL-JOINTS BALL-JOINTS
Bimini hardware
B B
Polished 316
Polished 316
stainless steel
C
stainless steel
D C
A B C D A B C
A B C
max. 175
min. 120
Ref.: 141015 7/8”-22,2 65 100
Sold in pairs
Ref.: 141016 1”-25,4 65 100
22
14
12
6 28
26
36 Ref.: 141069 44 32 22
6
Length 50mm. 49
44
79
ECHOMAX 230-SOLAS
Radar reflectors
80
Radar reflectors & Winches
ECHOMAX 180
Suitable for vessels up to 7-8 metres. Patented symmetrical stacked array, robust Polyethylene case
with minimum windage and weight. Suitable for deck, mast mount fixing, or halyard suspension.
Used extensively on marine buoys and for tsunami warning buoys.
DuPont metallized, lacquered and spunbonded fabric array with PVC case. Folds
down neatly to pocket size and is an ideal addition to the grab bag for emergency
use. QinetiQ recorded an astonishing a maximum response of 20m2, exceeding
RORC requirements by two fold.
Can be mounted from halyards or with optional three piece glass fibre rod kit.
Also suitable for dinghy or liferaft use.
@+/-3º - 20m2
Dimensions: Height: 750mm
Ø: 30mm
Ref.: 060005
RADAR REFLECTORS
81
COMFORT SEATS
The Comfort Seat combines quality, beauty and comfort with one innovative design. The Comfort Seat is easily placed on any surface
without losing your balance. Whether you like to relax on your boat, on the beach, at the waterside or in your garden – a Comfort Seat
is the ideal cushion. Despite the seat’s generous proportions, it’s light weight makes it easy to carry anywhere you go.
Seats
The flexible polyester seat and back support gives the Comfort Seat its comfortable feeling. The cushion has a unique integrated hinge
which you can set in fourteen different positions. You have no need for additional support for your back. Because of the protective slip
resistant layer stable seating is guaranteed. The covering material is colourfast, water resistant and anti-mould, so wet conditions (even
if its falls inadvertently into the water) are no problem at all.
FINISHES
All Comfort Seat are available with these finishes:
A B C D E
Navy blue Red Dark sand White/Navy blue White (synthetic leather)
MINI
CLASSIC
EXTRA
82
ROUND BACKRESTS FOR RAILS
It turns any rail (cable or tube), into a comfortable backrest.
Synthetic leather.
Colour
Length: 55cm.
Seats
White Ref.: 060499
Design TREMPECK.
Blue Ref.: 060498
ANGLED CUSHIONS
Without drilling, just suction cups or clips.
Synthetic leather.
Colour
Length: 55cm.
White Ref.: 060494
Design TREMPECK.
Blue Ref.: 060495
Ref.: 060248
83
“GLOSSY” TABLE COLUMNS REMOVABLE PEDESTAL
Nor-Sap has developed a new range of aluminium table columns.
Table pedestals
Bright polished. Ø80mm columns. Perfect finish similar to stainless steel. Ref.: 120112
Option: with gas spring for easy height adjustment.
Under table/seat
base
LY
RATE
SEPA
SOLD
Ref.: 120110
Adjustable column:
350 to 600mm
Ref.: 120111
Recessed deck base with
lid.
Anodised aluminium.
Patented locking system for a safer
operation.
Ref.: 120106 Ref.: 120107
TELESCOPIC TABLE PEDESTAL
Ref.: 120113 With gas spring Ref.: 120109
Ø65
700
ØC
Anodised aluminium.
A With gas spring for easy height
75
Ø200 adjustment.
Ø80mm column.
Ref.: 120108
Plastic bases with polished aluminium TELESCOPIC TABLE COLUMN
column. Deck base has a stainless steel
ØB
trim ring.
RECESSED BASE
Ref.: 120099
A C Marine aluminium
B
epoxy powder coated.
Ref.: 120115 700 150 50 With gas spring for
easy adjustment.
Ref.: 120116 700 150 65 With stainless steel Robust Ø80mm
Ref.: 120118 465-680 150 50-65 embellisher. For Ø65mm column.
Ref.: 120120 tube.
84
SIDE MOUNT TABLE PEDESTAL SYSTEMS
Table pedestals
Anodised aluminium. Bolts, nuts and screws
are made of stainless steel, grade A4.
Perfect to enjoy a light and removable table.
It is the perfect solution for mounting tables in
the cockpit.
It gives you a great freedom of movement.
Bracket and arm turn 360°.
Two versions available 500 and 750mm height.
L
500 Ref.: 120200
750 Ref.: 120201
SPARE PARTS
ACCESSORIES
Ref.: 120217
Plastic sleeves
2-pack
Wedges to correct the Extra mounting plate that allows Cross fitting for rail mount.
bulkhead angle. you to use your table in other Ø25mm (see other Ø on
place. page 37)
Ref.: 120218
Lever
TABLE TOPS
Table top 700x420mm made in teak wood. Laminated wood table top.
Interrupted edge frame for easy cleaning. Interrupted edge frame for easy cleaning.
85
CAPTAIN SEATS
Aluminium structure, foam padding with high
quality upholsteries and finishes.
Seats
Finish A B C D
Ref.: 060446 White Polyskin 620 610 460 590
Ref.: 060447 Blue Tempotest* 620 610 460 590
PORTO SEATS
Aluminium structure, foam padding with high
quality upholsteries and finishes.
Finish A B C D
Ref.: 060449 White Polyskin 500 600 410 550
Ref.: 060450 Blue Tempotest* 500 600 410 550
PORTO-HEADREST SEATS
Aluminium structure, foam padding with high
quality upholsteries and finishes.
Finish A B C D
Ref.: 060451 White Polyskin 550 600 410 550
Ref.: 060452 Blue Tempotest* 550 600 410 550
86
MAIA SEATS
Aluminium structure, foam padding with high
quality upholsteries and finishes.
Folding backrest, allows to use both sides, drive
Seats
position or back flipped.
Finish A B C mm
White Polyskin 500 480 460 Ref.: 060461
Blue Tempotest* 500 480 460 Ref.: 060462
Finish A B C mm
White Polyskin 500 480 940 Ref.: 060463
Blue Tempotest* 500 480 940 Ref.: 060464
STEERSMAN SEATS
Aluminium structure, foam padding with high
quality upholsteries and finishes.
Folding backrest.
Finish A B C mm
White Polyskin 520 580 440 Ref.: 060467
Blue Tempotest* 520 580 440 Ref.: 060468
BAIONA SEAT
Ultramodern.
Reinforced aluminium and special foam cushion.
Flip-up seat front part for easy driving standing up.
Width: 580mm
Ref.: 060078
Weight: 7,5kg
87
FOLDING BACKREST 404 SEATS ARMRESTS
150 kg.
Electropolished
stainless steel.
400 kg.
Countless
applications. Electropolished Max. static
load
stainless steel.
Ref.: 123009 Countless
applications.
ore
Max. static load over short side: 1.800kg
See m ackets
g br
Max. static load over long side: 800kg Ref.: 123016
d i n
f o l
p a g e 242
88 on
SAVANNAH SEAT PORTONOVO SEAT
Ref.: 060270 Ref.: 060271
Seats
Cushions: white with colour edge
Dimensions: Front 525 x Depth 380 x Height 800mm. Dimensions: Front 440 x Depth 540 x Height 800mm.
Ref.: 060267
Dimensions:
Front 570mm.
Depth 470mm.
Rotomolded white polyethylene.
Height 810mm.
Removable cushions.
Marine grade vinyl upholstery.
Aluminium pedestal and
sliders.
HATTERAS SEAT
89
DOUBLE LEANING POSTS “GLOSSY” SEAT PEDESTALS
Seat column with manual height adjustment, seat slider and
Seats & Hardware
Ref.: 060261
Marine aluminium.
For Ø73mm tube.
Platform: 332x180mm
Slider stroke: 135mm
Ref.: 060283
90
TELESCOPIC PEDESTAL SEATS
Flush rails.
Length of rail: 3,66m
Option: Locker
End cap
on port or
Ref.: 122557 starboard
Ref.: 122552 Non drilled. side.
Ref.: 122553 Drilled M8.
Surface rails.
Length of rail: 3,66m.
End cap
Ref.: 122558
Ref.: 122556 Drilled M8.
Ref.: 122559
Ref.: 060290
91
SEATS + PEDESTAL KITS
Ergonomic design.
Double lock guides.
190mm slider with lock every 10mm.
45º adjustable backrest. Adjustable armrests included.
High resistance synthetic upholstery or black sky.
92
SUSPENSION SEAT
Ref.: 060042
Helm seats
SUSPENSION SEAT
Ref.: 060051
Seat belt
Ref.: 060052
93
FOLD-UP SEATS
Ref.: 060050
94
Request information
Helm seats
Your partners at sea
Flexible solutions and able to
adapt to specific demands
95
NOR-SAP 1700
The lightweight controller chair. Ergonomic design and mounted
on a strong Ø150mm column. Crafted of aluminium and in
genuine leather.
Spacious armrests which can be fitted with the controlling
equipment of your choice. 60cm2 of space to fit your equipment
in each armrest. If required, further customizing of the armrests
is possible.
Functions:
Adjustable back rest and seat with gliders.
Adjustable flip up armrests.
Backward/forward adjustment of the seat.
Seat swivels 360°.
Foot rest and seat folds up.
Shock dampening column.
Helm seats
NorSap does
not include any
instrumentation.
Upholstered as standard
in black leather. Other
colours or fabrics
available upon request.
96
NOR-SAP 1500 COMFORT
Helm seats
Custom equipment in armrests.
Electrical height adjustment.
Lumbar support.
Heated seat.
Ref.: 060046
NorSap 1500 Yacht 630/730mm
Upholstered as standard
in black leather. Other
colours or fabrics
available upon request.
97
NOR-SAP 1000 COMFORT
Upholstered as standard
in black leather. Other
colours or fabrics
available upon request.
98
NOR-SAP 800
Upholstered as standard
in black leather. Other
colours or fabrics
available upon request.
Helm seats
800 series is the smallest chair model of NorSap
and it is a popular choice for smaller operator
bases. The flexibility of the chair comes from Optional:
the small space it occupies. It also comes in Heated seat.
fixed seating for use in situations where there Standard deck rails.
is no need for adjustment of the seat. Lumbar support.
Functions: Additional seat cover.
Adjustable footrest which can be folded up.
Adjustable backrest and seat.
Forward/aft adjustment of seat. Deck rails, see page 89.
Chair swivels 360°.
STANDARD COMFORT
Aluminium column mounting Ø80mm. Aluminium telescopic column mounting Ø80mm.
Fixed column: 875mm. Height adjustable column: 700/870mm.
Ref.: 060069 NorSap 800 Standard Ref.: 060060 NorSap 800 Comfort manual height adjustable
column
Ref.: 060061 NorSap 800 Comfort gas dampened height
adjustable column
99
NOR-SAP 800 OFFICE NOR-SAP 800 OPERATOR
5-star legged chair.
Free standing chair, optionally fixed to the deck
Gas dampened height adjustable column.
Ref.: 060070
Helm seats
Upholstered as standard
in black leather. Other
colours or fabrics
available upon request.
NOR-SAP UPHOLSTERY
100
DECK RAILS
Deck rails
800/1000 Series
Surface Flush
L Standard Basic Standard Basic
800 Series 1000 Series 800 Series 1000 Series
1,5m Ref.: 060210 Ref.: 060224 Ref.: 060226 Ref.: 060214 Ref.: 060223 Ref.: 060225
2m Ref.: 060211 Ref.: 060215 There main difference is
2,5m Ref.: 060212 Ref.: 060216 the visual appearance of
3m Ref.: 060213 the deck rail. Available
Ref.: 060217
deck rails for placing on
top of existing deck and
1500 Series flush mounted deck rail.
Surface Flush
L Standard Basic Standard Basic
1,5m Ref.: 060200 Ref.: 060228 Ref.: 060204 Ref.: 060227
2m Ref.: 060201 Ref.: 060205
2,5m Ref.: 060202 Ref.: 060206
3m Ref.: 060203 Ref.: 060207
Flush
mounted
SLIDING BASE
101
COMFORT SLAT BED BASES
102
SPORT
Direct reading dial 2” - 51mm
73
50
Compasses
TREK
60
21
Direct reading dial 2 1/4” - 57,2 mm
94
69
89 Bracket Mount
The fully adjustable and reversible bracket
Flush Mount allows a mounting range of over 300º from
cut out: 76,2mm overhead, through angled, vertical and
horizontal surfaces.
Lighting: 12V
Lighting: 12V
Black White
Black White
Ref.: 101010 Ref.: 101011
Ref.: 101012 Ref.: 101013
Surface Mount
60 Lighting: 12V
Black White
76
Ref.: 101014 Ref.: 101015
EXPLORER
Direct reading dial 2 3/4” - 70mm
93
73
Surface Mount
Lighting: 12V 124
Ref.: 101024 Flush Mount
46
cut out: 95,3mm
Lighting: 12V
62
Black White
Ref.: 101020 Ref.: 101021
103
EXPLORER
Direct reading dial 2 3/4” - 70mm
103
100
Surface Mount
Lighting: 12V
Ref.: 101028
119
Compasses
Dash Mount 90
Bracket Mount cut out: 76mm
Lighting: 12V Lighting: 12V
Black White Black White
Ref.: 101022 Ref.: 101023 Ref.: 101026 Ref.: 101029 86
VOYAGER
Dial 3” - 76 mm
130
51
32
125
Surface Mount
Flat-card dial
Lighting: 12V 133
Ref.: 101035
130
Bracket Mount
Lighting: 12V
116
Direct-read dial Flat-card dial
Ref.: 101033 Ref.: 101034
Protection cover
Ref.: 101070
104
HELMSMAN
Dial 3 3/4” - 93,5mm
Protection cover
Ref.: 101072
Flush Mount
Flush Mount Flat-card dial
Compasses
Combi dial 131 cut out: 101mm
cut out: 107mm Lighting: 12V
Lighting: 12V 62 Black White
Ref.: 101040 Ref.: 101041 Ref.: 101042
57
130
134 165
140
Protection cover
Ref.: 101071
Surface Mount
Lighting: 12V Bracket Mount
Lighting: 12V
SUPERSPORT
Dial 3 3/4” - 93,5mm
Bulkhead Mount
Combi dial
Lighting: 12V
cut out: 118mm
Ref.: 101047
105
NAVIGATOR
Dial 4 1/2” - 114mm
Flush Mount
Flat-card dial
cut out: 130mm
Lighting: 12V
Black White
Ref.: 101051 Ref.: 101052
Surface Mount
154 Lighting: 12V
Bulkhead Mount
Combi dial
Lighting: 12V
Ref.: 101055
Flush Mount
Combi dial
cut hole: 130mm 184
Lighting: 12V
Ref.: 101050
76 83
NAVIGATOR STEEL BOAT BINNACLE B-200P GLOBEMASTER STEEL BOAT YOKE YB-500
GLOBEMASTER D-515
Binnacle
Flat-card dial 5” - 127mm
Built-in compensators
Protective cover included
Lighting: 12V
Ref.: 101082
Spare light
Ref.: 101090
106
IOTA
Professional construction.
Extra internal bowl for shock and
vibration resistance.
Fully gimbaled.
6 lubber lines for parallax free
reading of the heading from
different directions.
Base with steel boat correctors.
MED approved.
Bracket for
horizontal surface,
Ref.: 101101
bulkhead or
overhead mounting
Compasses
(any angle).
PISA
122
Lighting: 12V
82,5 Cover for PISA
compasses
148
Bracket Mount
Ref.: 100008
154
P95 BR/W
AMALFI
86
78
106
132
Direct reading dial 65mm A65 BI/B A65 BI/W AMALFI Bracket
Lighting: 12V Ref.: 100001 Ref.: 100002 Ref.: 100003
OFFSHORE BINOCULARS
Ref.: 700833
107
ONER 290
Stainless steel LP gas cooker with 1 236
burner.
The burner with improved stainless steel
cap performs to the max and allows 240
precise temperature setting.
Surface mount, removable.
Options:
Ref.: 079010
Gimbals Ref.: 079041 273 159
Pot holder Ref.: 079032
SAILOR
Cookers
557
Stainless steel LP gas cooker with 2 500
burners.
Technologically advanced burners provide
lots of power when you need it but 280
permit at the same time cooking delicately
when used at minimum power level.
Optimum heat distribution.
Surface mount, removable.
Options:
Ref.: 079011 104
Pot holder Ref.: 079033
RACER 510
456
Stainless steel LP gas cooker with 2
burners and gimbal. 240
Durable solid structure, this stove is made for
the tough environment because of its durable
solid structure (1mm extra-thick steel is
employed for the chassis construction):
- space saving design
- two big powerful burners with special
updated stainless steel cap burners
- detachable rack 273
Ref.: 079013 115
SKIPPER 557
Stainless steel LP gas cooker with 2 500
burners and grill.
The grill power responding to specific
consumer demands we offer this special 280
stove configured for efficient cooking
performance.
- grill burner with adjustable power
and dedicated easily accessible chamber
with dual position rack and a large size
removable tray
- hob burners Options: 273
allowing precise 181
flame adjustment Gimbals Ref.: 079036
Ref.: 079012
Pot holder Ref.: 079040
108
CLASSIC
Cookers
MASTERGRILL
442
341
Ref.: 079016
XL3
TOP 4
Ref.: 079014
109
SEAFARER 2
470
Stainless steel LP gas hob with 2 burners.
Makes use of turbo slimline burners with
technologically advanced design and precise
flame adjustment.
340
Compact solution of built in hob.
Options:
SEAFARER 3 470
Options:
65
Pot holder Ref.: 079031
Ref.: 079002 Glass cover Ref.: 079038
230V - 1500W
240V - 2000W
Ref.: 079129 Ref.: 079025
SUPERGRILL
290
110
521
CRISTALTHREE
Ref.: 079023
46
100
587 CRISTALFOUR
Cookers
Stainless steel electric ceramic hob with 4 cooking zones.
Versatile double heating element system.
Flush mount.
Residual heat indicator.
517
1800+1200+1200+1200W
230V - 50-60Hz
Ref.: 079024
46
100
POT HOLDERS
For “Cristal” series
111
ALCOHOL COOK TOP SINGLE BURNER
Very easy to use, just touch a match to the centre chimney and start
cooking, no preheating or priming required.
Great heat output.
The burner is easily controlled by rotating a wheel that extends slightly
though the cook top flange.
Ref.: 079104
Ref.: 079105
Ref.: 079103
Ref.: 079101
Ref.: 079117
Ref.: 079102
112
LITE-TOUCH COOK TOP SINGLE BURNER 240V
304 317
One Ø165mm burner 240V-1200W
Black beveled edge ceramic glass. Durable and easy to
clean. Infrared Lite-Touch control, clear digital display and
52 elegant design.
Safety features: lock-out to prevent accidental activation,
auto shut-off, heat indicator and fault indicator with audi- With pups
260
ble alert, heat limiting cooking surface protectors and Hot
292 Ref.: 079121 Ref.: 079126
indicator light.
Cookers
260
292
Ref.: 079123
113
MEDITERRANEAN COOKTOP THREE BURNERS 120V
Three Ø165mm burners 120V-1200W each. 553 514
Subtly textured black ceramic glass, beveled edge design,
durable and easy to clean.
Push-to-turn controls, infinite heat control and quick-to-heat
radiant ribbon elements.
67
Safety features: heat limiting cooking surface protectors, On
indicator light and Hot burner indicator light. 459 497
Ref.: 079130
240V - 1300W.
Ref.: 079106
502
10 units set
Ref.: 079115 Ref.: 079110 Ref.: 079111 Ref.: 079112
120V/60Hz - 700W
Tactile buttons. Swiveling glass plate. Automatic defrost.
Dimensions: Width 464 x Height 280 x Depth 345mm Ref.: 700784
114
PROTECTS THE AIR THAT
YOU BREATHE
Air purifier
AIR PURIFIER
DELINO D10 P
Usage:
It is completely maintenance free, therefore no filters to change or clean.
For areas up to 20 m².
D10 P has a range of up to 240 m³.
Installation:
Sited about 2 meters above the floor, such as a bookcase, a cupboard or
hung on the wall. Connect the transformer (12V) to the nearest electrical
outlet. (230V transformer supplied, for 12V is necessary to buy the cable
Ref.: 020006).
Ref.: 020005
12V cable
Ref.: 020006
115
COOLMATIC CRX
Certificates: C
A
TÜV/GS, 95/54/EG.
B
12/24V
Fridges
A B C W Volume Model
*Chrome
**12/24/220V
116
COOLMATIC HDC 195 FRIDGE
Whether you have a large family or love to host groups of friends, there are lots of
reasons to need a big fridge. And the Dometic CoolMatic HDC 195 offers incredible
capacity at 173 l including a 41 l freezer. But it’s not just its size that makes the HDC
195 impressive, it also comes with a secure lock for transport as well as conveniently
variable door hinges and locks (left or right). Plus its suitable for solar power: mea-
ning you can be kind to the environment while you keep your drinks cold!
Ref.: 045230
Fridges
COOLMATIC HDC 225 FRIDGE
Whether you have a large family or love to host groups of friends, there are lots of
reasons to need a big fridge. And the Dometic CoolMatic HDC 225 offers incredible
capacity at 228 l including a 44 l freezer. But it’s not just its size that makes the HDC
225 impressive, it also comes with a secure lock for transport as well as conveniently
variable door hinges and locks (left or right). Plus its suitable for solar power: mea-
ning you can be kind to the environment while you keep your drinks cold!
Ref.: 045231
EPS100
EPS817
117
COOLING UNITS
CU-94
CU-55+VD01 CU-55+VD-07
EVAPORATORS
118
CAFETERA
Don´t be without your filter coffee on board. This neat little cafetiere coffee maker will
make up to 5 cups. Swing filter can be turned for easier use, integrated transport
securing device for glass pot, hotplate with thermostat, fixing kit for wall or desk
mounting.
Model: MC052
Voltage: 12V
Power comsumption: 170W
Capacity: 680mL (5 cups) Ref.: 700834
V A W Dimensions (mm)
230 3.5 800 280x170x170 Ref.: 020000
119
Not only absorbs hydrocarbons, it promotes rapid bio-degradation and remediation of the absorbed.
The Petroleum Remediation Product (PRP®) is an all natural hydrocarbon absorbent that also attracts and stimulates the natural
microbial population to degrade oil on land or water. PRP® uses a NASA-developed encapsulation process enabling production of
buoyant capsules, which never sink, even when fully saturated with oil. PRP® is oleophilic (clings to petroleum); yet hydrophobic (repels
water). Petroleum components penetrate the PRP® (where they become a source of nutrients for the microorganism) enhancing the
overall effect of the bioremediation process.
The PRP contain hydrocarbons, biodegrade it and then biodegrade itself.
BIOSOK
BioSok™ for fuel & oil absorption and remediation in boat bilges.
Easy-to-use, completely non-toxic and environmentally sound means of capturing and biodegrading the
oil and fuel that leaks in a boat bilge and often escapes into marina waters.
Placed inside the bilge, the BioSok™ begins to absorb the hydrocarbons, it reduces odour, and biodegrades
the leaking oil. BioSok™ will generally last a full boating season (normal bilge up to 9 metres boat) under
most normal conditions.
BioSok
Once depleted, you can simply throw away the outside fibre sleeve. There is nothing left to harm the
environment.
Dimensions Weight
BIOBOOM
BioBoom® for oil spill boom clean up.
Is different! In addition to quickly containing a hydrocarbon spill, this boom will also biodegrade the
contaminant, then biodegrade itself. Because no secondary contaminants are left, your disposal costs are
reduced or eliminated.
Dimensions Weight
Each BioBoom® is a sleeve of
75Øx1220mm 1500g Ref.: 020201 white fabric measuring three
inches in diameter.
75Øx1525mm 2000g Ref.: 020202
75Øx3050mm 4000g Ref.: 020203
BIO COLLAR
For every gas station at sea.
Placed around the spout of the station nozzle avoids leaking in the boat and at sea.
Dimensions Weight
PRP
PRP® Powder for hydrocarbon spill clean-up on oil, fuel and other liquid petroleums.
OIL BUSTER
A combination of PRP® and a proprietary blend of ground corncob used to absorb and remediate oil, fuel
and other hydrocarbons from hard surfaces such as concrete, asphalt or wood.
Packing Weight
120
BILGE-MATE
Designed as a low budget alternative for boat owners who nonetheless are looking
for a quality product. Ø base: 115mm, height: 100mm.
Compact, all-in-one motor/impeller unit. Improved design with easy-to-install Dura Port discharge
Bilge pumps
ports. Includes both a straight and a 90º smooth elbow, and a removable check valve. Max
Ø70mm - Max height 112mm
Flow
rate
Model l/min ØHose V A
Flow rate
Model l/min A Hose Ø
Sleek, reliable and compact unit with integrated “Ultima Switch” ready to install and run
for years of unerring service. Ultima Bilge 600, 800 and 1000GPH with easy-to install
Dura-port discharge ports. These pumps are delivered including both a straight and a
90º smooth elbow Dura-ports and a removable check valve. Ultima Bilge 1250GPH do
not include Dura-port connections. Removable impeller cover allows an easy clean out.
According with ISO8849, ISO8846, ISO10133 and EN55014.
121
HEAVY DUTY L-1600
Design to meet and exceed the tough demands of commercial and recreational duty.
Heavy duty 12-pole motors with stainless steel shaft and tough thermoplastic bodies. The
motor is sealed off by a lip seal. Universal base plate and a choice of ports for a simple
installation. Removable check valve included.
According with ISO8849, ISO8846, ISO10133 and EN55014 standards.
duty 12-pole motors with stainless steel shaft and tough thermoplastic bodies. The motor
is sealed off by a mechanical shaft seal. Universal base plate and a choice of ports for a
simple installation. Removable check valve included.
According with ISO8849, ISO8846, ISO10133 and EN55014 standards.
Ref.: 250212 12 130 l/min 120 l/min 7,5 11/8” and 11/4” Ø108x177mm
Ref.: 250213 24 130 l/min 120 l/min 4,5 11/8” and 11/4” Ø108x177mm
Livewell pump with two different intake configurations of straight and 90º.
1 Inlet: threaded 3/4”BSP
Outlet: Ø 3/4” Hose
Features heavy duty bronze bottom inlet, 1600GPH (100 l/min) of pumping power, dual port
capability, mega torque motor, double ball bearings, quiet running design.
Inlet: 1”NPT female
Outlet: Ø 11/8” and 11/4” Hose
122
BILGE PUMPS
BILGE PUMPS
Bilge pumps
Model V A Flow rate Hose Ø Dimensions
1500GPH 12 4,8 5676 l/h 1 1/8” Ø106x152 Ref.: 080040 1500 GPH
1500GPH 24 2,3 5676 l/h 1 1/8” Ø106x152 Ref.: 080041
2000GPH 12 8,4 7568 l/h 1 1/8” Ø106x152 Ref.: 080051
2000GPH 24 4 7568 l/h 1 1/8” Ø106x152 Ref.: 080052
2000 GPH
123
AUTOMATIC BILGE PUMP
180º orientation
OXIGENADOR
Ref.: 080072
124
ORCA AUTO
ORCA AUTO
ORCA
Bilge pumps
500 12 1,5 A 32 l/min 3/4” Ref.: 070228
ORCA
2000
125
BILGE CONTROL PANEL & ALARM
BILGE ALARMS
Bilge pumps
BILGE ALERT
High water alarm featuring digital technology. Totally sealed fluid detector
is never in contact with water, will not corrode and is not affected by oil
or debris. Bilge Alert detects water and send a signal (3 seconds delay) to
the alarm and switch conveniently mounted on a panel. Three ways rocker
switch allows alarm to be tested, turned off and armed.
Panel dimensions: 60x73mm
126
“WHALE” SENSOR SWITCH “ULTIMA” SWITCH
For use with Digital technology using the Mirus field effect detector
12 and 24V cells. The solid state electronics and field detectors of
pumps the Ultima switch contain no moving parts or mercury,
Ref.: 070209 are totally sealed, never in contact with the water, will
not corrode and are not affected by oil or foreign debris.
Max. 20A
Activates pump at 50mm water level, deactivates at 20mm
water level. A 3 seconds delay prevents false alerts.
Dimensions: 85x65x32mm
Electric Field Sensor Technology For 12/24V pumps up to 20A Ref.: 250236
Dimensions: 100x20x60mm
BILGE WATER ALARM SENSOR AUTOMATIC BILGE PUMP SWITCHES WATER WITCH
Float switches
automatic activation of bilge pumps.
Housed in a protective Easy to install and housed in a protective
stainless steel casing with stainless steel casing with bracket.
bracket. The vertical float sender can be easily
Dimensions: Ø38x100mm removed from the housing for cleaning.
Dimensions: Ø38x100mm Ref.: 081040 24V - 15A
12V Ref.: 118047 Ref.: 081041 12V - 20A
12/24V 15A
Ref.: 118048 Dimensions: 65x40x38mm
0,3A Max 24V Ref.: 118046 Max
On deck/
bulkhead mount
BP4402 BP4410
Ref.: 071101 Ref.: 071107
MK5 UNIVERSAL
Multiple mounting options: on deck/bulkhead For MK5 pumps on thru deck/bulkhead mounting
and thru deck/bulkhead a deck plate is recommended.
Nitrile diaphragm, valves and seals.
Flow at 70 strokes/min.: 66 litres Plastic 4 hole
Hose Ø: 38mm Covered
Ref.: 071056
127
GUSHER 30 MK5 SANITATION TOILET WASTE PUMPS
Double action high capacity bilge pump. Flow at 60 strokes/min.: 66 litres.
Marine grade LM6 aluminium alloy powder coated Hose Ø: 38mm
pump body. BP 0535
Neoprene diaphragm and valves. Ref.: 071053
Flow at 70 strokes/min.: 117 litres Thru deck/bulkhead mount
Hose Ø: 38mm BP 3020 Deckplate not included
Ref.: 071100
Thru deck/bulkhead mount
Deckplate is included BP 0527
Ref.: 071054
BP 3000 On deck/bulkhead mount
Nitrile diaphragm and valves.
Ref.: 071102
On deck/bulkhead mount
Manual pumps
233
86
Hose Ø: 38mm.
216
265 MH 5560 Ref.: 071061
HAND PUMPS
Portable lightweight design.
Suitable for diesel transfer.
Ideal for bailing out small boats, dinghies or kayaks.
2 sizes available: Short and Long Barrel
SMARTBAIL COMPAC 50
Slim-line design. Fast
installation.
Sleek integrated handle.
Cut out Ø140mm.
Nitrile valves and seals,
santoprene diaphragm.
Ports swivel 360º. Thru deck/bulkhead mount.
Complete, with deckcover. Nitrile
diaphragm, valves and seals. Tough,
1”-140
200 proven, reliable design. Capacity at
11/2”-150
70 strokes/min.: 40 lit.
215
A position B position
BP 0350
BP5010 Ref.: 071042 BP5021 Ref.: 071043
Ref.: 071041
Hose Ø: 1” - 25mm Hose Ø: 11/2” - 38mm
128
HAND BILGE PUMP
Manual pumps
Hand bilge pump for bulkhead mounting.
Flow rate by 60 cycles: 45l/min
Hand bilge pump for surface Dimensions: 250x170x120mm
mounting. Handle length: 260mm
GUSHER 10 MK3
LM6 diecast alloy bilge pump.
Robust design, instant access and easy maintenance.
High flow non-choke valves. Flow: 65 lit/min.
Hose Ø: 38mm
To mount thru deck/bulkhead a deckplate with lid is available:
Ref.: 071055.
BP 3708 Ref.: 071108
129
GUSHER TITAN
Outlet valve*
Inlet & outlet valve
plates & screws*
Handle assembly
Clamping ring kit Ref.: 070924
Ref.: 071104
Diaphragm*
Circlips*
Deckplate kit
Ref.: 071055
Ref.: 071104 Clamping ring kit Gusher Titan on deck AS4407
Gaiter kit for deckplates Ref.: 070926 Clamping plates kit AS4412
Clamping ring kit Ref.: 071908
Ref.: 070928
Handle assembly
Ref.: 070927 Handle kit Gusher Titan trhu deck AS4408
Ref.: 070924
Inlet valve*
Outlet valve* Ref.: 071908 Gaiter Kit for deckplates AS3725
Clamping plates kit
Ref.: 070926
Ref.: 071055 Deckplate kit DP8904
Ref.: 070928 Clamping ring kit Gusher Titan thru deck AS4409
Circlips*
Inlet & outlet valve
plates & screws*
Diaphragm*
Lever kit
Ref.: 070927
Items with (*) are included in service kit.
Inlet valve & plate* Outlet valve & screws* Ref.: 071911 Lever kit MK5 Sanitation thru deck AS0531
Top cover seal*
Handle assembly
Ref.: 071910 Outlet valve & screws*
130
COMPAC 50 Screws*
Inlet valve*
Deckplate kit AS0356 Ref.: 071913 Rocker arm & clamping plate kit
Ref.: 071912
Circlips*
Manual pumps
Deckplate kit
Ref.: 071913
Gaiter*
Handle assembly
Ref.: 071909
GUSHER URCHIN
Deckplate kit
Ref.: 071055
Deckplate kit DP8904 Ref.: 071055 Operating lever kit Circlips small*
Ref.: 070933
Ref.: 070910 Service kit Gusher-30 AK3051 Ref.: 070911 Service kit Gusher-25 AK3528
Ref.: 070929 Handle kit Gusher-30 AS3015 Ref.: 070912 Service kit Gusher-10 MK2 AK3714
Ref.: 070930 Diaphragm kit Gusher-30 AS3014 Ref.: 071904 Service kit Chimp MK2 AK8015
Ref.: 070931 Handle Gusher-30 AS3095 Ref.: 071906 Service kit Chimp MK1 AK8010
131
SELF-PRIMING MANUAL PUMPS
EX
Hand pumps widely used for empty bilge and for transfer
liquid such as: fresh water, sea water, diesel-oil and oil.
Model Inlet (m) Flow rate (l/min.) Max. head (m) Weight (Kg) Ports
GAS-BSP
Ref.: 072000 EX 0 B 7 16 25 3,3 1/ ”
2
Ref.: 072010 EX 0 GB 7 16 25 3,1 1/ ”
2
Ref.: 072001 EX 1 B 7 20 25 4,8 3/ ”
4
Ref.: 072011 EX 1 GB 7 20 25 4,3 3/ ”
4
Ref.: 072002 EX 2 B 8 30 25 6 1”
Ref.: 072012 EX 2 GB 8 30 25 5,5 1”
Ref.: 072013 EX 3 GB 8 40 25 8,3 1
1 /4”
Ref.: 072014 EX 4 GB 8 55 25 9 1 1/4”
Ref.: 072015 EX 5 GB 8 80 25 12,5 1 1/2”
o m
. c
i t ra
b a
132
BILGE WATER FILTRATION AND POLYSHING SYSTEMS
Lloyds Type Approved and available for a wide range of craft, from small day boats to tankers and shipping.
The Wavestream™ cartridge uses a unique filter media developed to remove even the smallest trace of oil. Due to the high efficiency
and capacity of the cartridge the removal of fuel, oil and grease is not affected by the flow rate of the bilge water.
The Wavestream™ filter is simply installed in the system after the bilge pump, ensuring only clean, oil free water is pumped overboard.
Efficient and cost effective with a long cartridge life. Easy to install with simple cartridge change out.
Bilge filters
WAVESTREAM SYSTEM 1
Developed for powerboats and yachts up to around 15 metres. In this size
of boat the cartridge will easily last 6 months in normal service.
If accidental oil spillage occurs heavy contamination should be removed
to preserve cartridge life.
Max.
Flow rate Pressure Connections
WAVESTREAM SYSTEM 2
Very popular for all boats over 15 metres, used by prestige powerboat,
yacht and Superyacht builders and in small commercial vessels.
Required bilge pump head to be a minimum of 4 metres.
Max.
Flow rate Pressure Connections
WAVESTREAM SYSTEM 3
Used in larger boats and Superyachts. Megayachts and ships often use multiple
sets of the Wavestream System 2 & 3. Wavestream™ units are used as either stand
alone primary systems, installed in the discharge line after the bilge pump, or as a
secondary polishing filter after an existing oil water separator.
Required bilge pump head to be a minimum of 4 metres.
Max.
Flow rate Pressure Connections
133
F2P10-19
Fully equipped, self-priming multipurpose pump operating on a
simple and uncomplicated principle. Ideal for pumping water,
oils and chemicals.
Pump body: thermoplastic polyester (PTMT)
Connections: 1/2” hose
Shaft seal: lip seal
Dimensions: 172x117x78mm
Open flow: 15 l/min
F3B-19
Perfect for bilge pumping, deckwash, water circulation, oil and
diesel refuelling at dockside service,...
Pump body: bronze
Connections: 3/8”BSP
Shaft seal: lip seal
Can be combined with a vacuum switch when
used as bilge pumps and with a pressure Dimensions: 170x113x82mm
switch for deck wash applications. Open flow: 21 l/min
See accessories (page 124)
F4B-19
Perfect for bilge pumping, deckwash, water circulation, oil and diesel
refuelling at dockside service,...
Pump body: bronze.
Connections: 1/2”BSP or 1” hose.
Shaft seal: lip seal
Can be combined with a vacuum switch when Dimensions: 202x120x90 mm
used as bilge pumps and with a pressure
switch for deck wash applications. Open flow: 48 l/min
See accessories (page 124)
F5B-19
Perfect for bilge pumping, deckwash, water circulation, oil and diesel
refuelling at dockside service,...
Pump body: bronze.
Shaft seal: mechanical seal
Can be combined with a vacuum switch when Connections 3/4”BSP thread.
used as bilge pumps and with a pressure Dimensions: 258x131x120mm
switch for deck wash applications.
See accessories (page 124) Open flow: 55 l/min
134
SLIDING VANE PUMPS SUMP PUMP
Centrifugal vanes. For medium viscous liquids transfer
(diesel, light oils,...). Brass barrel and cast brass ends
Non suitable for water. and handle.
Flow at 3m: 35 l/min. Inlet/outlet for 1/2” (12mm) hose.
Max. Lift: 2m.
Max. continuous operation 45min.
Hose Ø19mm Dimensions: 193x128x103mm
CIRCULATION PUMPS
24V Ref.: 250151 24V Ref.: 250153 24V Ref.: 250155 24V Ref.: 250157
135
SELF-PRIMING PUMPS
Multipurpose pumps
Self-priming electric pump in bronze with side liquid ring made, widely used in nautical sector to
empty bilges and transfer liquids such as: fresh water, sea water, diesel-oil, etc.
Pump body, impeller and pipe fittings: Bronze. Shaft: 316 stainless steel.
Lip seal: special corrosion-proof NBR, with bronze spring.
Mod. V A Power Max. Max. Flow rate Amm Bmm Cmm hose Ø Connec.
(Kw) lift head at 1m GAS-BSP
136
CENTRIFUGAL ELECTRIC B-CE PUMPS
Centrifugal electric pumps made in bronze widely used in the nautical sector to transfer and/or
deliver fresh water and sea water to all the plants where a large flow rate is needed such as: air
conditioning, cooling and circulation.
Body, bracket and impeller: bronze. Liquid free of solid impurities.
Shaft: 316 stainless steel. Temperature range of the liquid: 0º-90ºC
Mechanical seal: Ceramics-graphite-NBR Max. suction depth: 7m
(special corrosion proof) Static pressure inside the pump body: 6 bar
max.
Models 12/24V: IP23
Models 230V: IP55
Model V Power (Kw) A RPM Flow rate (l/min.) Pressure (bar) Connections
GAS-BSP
B-CE16 12 0,15 16 2800 40 0,7 1/2” Ref.: 088025
Multipurpose pumps
B-CE16 24 0,15 8 2800 40 0,7 1/2” Ref.: 088026
B-CE20 12 0,37 38 2800 80 1,4 1” Ref.: 088027
B-CE20 24 0,37 20 2800 80 1,4 1” Ref.: 088028
B-CE20 230 0,37 8 2800 80 1,4 1” Ref.: 088049
B-CE22 24 0,55 30 2800 120 2,1 1” Ref.: 088029
B-CE22 230 0,55 4,5 2800 120 2,1 1” Ref.: 088030
Model A B C Weight (Kg)
B-CE16 285 122 138 5,6
B-CE20 325 154 161 9,1
B-CE22 325 174 181 10,3
B-CE22 (230) 303 174 181 10,3
230V - 50/60Hz
Centrifugal seawater pump
Magnetic-drive impeller means no Model Flow rate (GPH) Inlet Outlet
seal to wear, leak, or repair
PLM250C 250 3/4” 1/4” Ref.: 076125
Efficient motor with low power
consumption PML500CK 500 3/4” 1/2” Ref.: 076126
Includes a marine-grade base. PML1000C 1000 1” 1/2” Ref.: 076127
Ref.: 088024
Ref.: 088020
Single screw self-priming pump made in bronze equipped with a single screw
made in 316 stainless steel that running inside in a NBR rubber stator.
Widely used for emptying waste tank, toilet sewage and particularly viscous liquids
with small solids bodies in suspension.
Body: bronze. Shaft, rotor and coupling: 316 stainless steel. Stator: NBR.
Mechanical seal: Ceramics-graphite-NBR (special corrosion proof)
Models 12/24V: IP44
Ref.: 088021 Models 230V: IP44 Temperature range of the
liquid: 0º-70ºC
Max. suction depth: 6m
Model V Power (Kw) A RPM Flow rate (l/min.) Pressure (bar) Connections Static pressure inside the
GAS-BSP pump body: 6 bar max.
137
ELECTRONIC PRESSURE PUMPS
• motor variable speed proportional to the required flow
• constant pressure / not require pressure accumulator
• universal voltage 12/24 V
• automatic stop in case of failure: empty tank, overloads and short
circuit
• operational monitoring by a led
• for salated and fresh water
169 mm UP2/E
38 mm
Electronic pressure pumps
116 mm
V Max pres. Max flow rate
80 mm
Consumption
Ref.: 089950 12/24 7,5 A 2 bar 10 l/min
12,5 mm
186 mm UP3/E
172 mm
14,5 mm
Consumption
Ref.: 089951 12/24 15 A 2,5 bar 15 l/min
80 mm
236 mm UP6/E
58 mm
94 mm
212 mm
UP12/E
264 mm
Ø 20,5 mm
UP14/E
138
DECK WASHING
DP3/E
V Consumption Max pres. Max flow rate
Ref.: 089962 12/24 10 A 3 bar 14 l/min
DP12/E
V Consumption Max pres. Max flow rate
Ref.: 089970 12/24 24 A 5 bar 15 l/min
Pumps
DECK WASHING KIT
Max. pressure: 3 bar. Flow rate: 14 l/min. 12V - 10A Ref.: 089948
Self-priming up to: 1,5 metres. 24V - 7,5A Ref.: 089949
154 mm
VP45-S 187 mm
120 mm
50 mm INTEGRATED SWITCH
VP45-AC
139
IMPELLER PUMPS
• self-priming electric pump with rubber impeller, for
bilge and waste water
• waterproof cable guide
• brush holder with EMI filter
• ISO 8846 and ISO 8849
REVERSE UP1-JR
152 mm
38 mm
Diesel and oil pumps
179 mm UP1-N
58 mm
V Consumption Max pres. Max flow rate
25 mm
194 mm
58 mm
UP1-M
UP12-PV
140
DIESEL TRANSFER PUMPS
• methalic brush-holder
• reverse flow
• nickel-plated brass body
• helical bronze gears
• stainless steel shaft AISI 316
166 mm
REVERSE UP3-R
V Consumption Max pres. Max flow rate
159 mm
14,5 mm
12 6A 2 bar 15 l/min
38 mm
Ref.: 089979
Pumps
With integrated
3-position switch 80 mm
UP6
V Consumption Max pres. Max flow rate
99 mm
UP3/OIL
80 mm
99 mm UP6/OIL
141
Baitra works with the best
brands,
So you just have to sail
VACUUM SWITCH PRESSURE SWITCH AND AQUA-JET 2,4GPM
TRIGGER NOZZLE KIT
Quiet and pulsation-free even at low speeds, the new Aqua Jet
Perfect for deck wash five-chamber diaphragm pump provides the perfect water pressure
installations. solution for both small and medium sized leisure and commercial
boats. Connections: 1/2” hose or 3/8” BSP thread. Flow rate: 9 l/min
Pressure: 2,8 bar. Dimensions: 204x197x110mm
Pressure pumps
on the impellers. Spare parts
2,4 GPM
12/24V
Pressure switch Ref.: 250094 12V - 10A Ref.: 250118
Membrane Ref.: 251132 24V - 5A Ref.: 250119
Ref.: 250048 Ref.: 250113
AQUA-JET DUO 9,5 GPM AQUA-JET UNO 3,4 GPM & 5,0 GPM
12V - 25A Ref.: 250110 Flow rate: 38 l/min. 12V - 10A Ref.: 250114 Ref.: 250116 12V - 15A
Pressure: 2,8 bar.
24V - 15A Ref.: 250111 24V - 5A Ref.: 250115 Ref.: 250117 24V - 8A
143
WATER PRESSURE PUMPS
Watermaster Automatic Pressure Pump.
High flow rates at a variety of outlets.
Smooth constant flow. Self-priming up to 3m (10ft).
Quiet operation. Automatic operation - Plug ‘n’ Play.
Easy Installation - Suitable for 15mm Quick Connect Plumbing
or ½” threaded hose connections.
Suitable for use with salt or fresh water.
V A Max. pressure Flow rate
Ref.: 070216 12 7,5 3bar 11,5l/min Spare filter
Ref.: 070217 24 5 3bar 11,5l/min Ref.: 070215
PRESSURE PUMPS IC
With intelligent control
Fresh IC provides a consistent stabilised water
system by monitoring flow, energy
consumption and back pressure.
Fresh IC provides 30% more flow and
45% more pressure in a typical shower
than VSD pumps. V A Flow rate
The Fresh IC is specifically designed to offer
premium flow and pressure in the shower, Ref.: 070047 12 6 14l/min
where you most want it.
Intelligent Control ensures the pump only Ref.: 070048 24 3 14l/min
turns off when outlets are closed.
Spare filter Robust motor IP65. Static System Pressure: 2,5 bar
Ref.: 070215 Inlet filter included. Maximum Running Pressure: 4,4 bar
Connections: Whale Quick Connect and 1/2” hose.
PRESSURE PUMPS
Low cost pump for water pressure systems.
144
ELECTRONIC WATER PRESSURE SYSTEMS
Water pressure systems featuring with electronic control system EPC (Electronic J-INOX/EPC
Pressure Control) widely used to provide a suitable and constant water pressure for
all on-board appliances such as: showers, washbasins, toilets, etc.
The EPC will automatically control the start and stop stages when the pressure
drops or when the water supply to the system is interrupted granted the following
advantages:
Automatic stop of the pump when the water has run out.
Constant monitoring of the operation by means of warning lights.
Constant pressure during the water distribution.
Overall dimensions reduced respect the traditional water pressure system with tank.
Pressure pumps
Temperature range of the liquid: 0º-50ºC
Static pressure inside the pump body: 6 bar max.
Model V Power (Kw) A RPM Flow rate (l/min.) Pressure (bar) Connections
GAS-BSP
J-INOX/EPC 24 0,6 28 2600 50 3,8 1” Ref.: 088031
J-INOX/EPC 230 0,6 3,8 2800 50 4,8 1” Ref.: 088034
MG-INOX/EPC 24 0,75 40 2800 90 5 1” Ref.: 088032
MG-INOX/EPC 230 0,75 5 2800 90 5 1” Ref.: 088033
MG-INOX/EPC
Ref.: 088022
145
260
WATER PRESSURE SYSTEMS MG-INOX
146
ACCUMULATOR TANKS
Stainless steel
accumulator tanks
for automatic
water pressure
pumps. Rubber
membrane
suitable for
foodstuffs. 2 litres -
2 litres tank with bracket. stainless steel
Hose connections 1/2” Used to provide 1/2” BSP
constant pressure
Pressure pumps
Ref.: 089977 Ref.: 089972
to onboard water 20 litres -
systems. 8 litres -
2 litres tank with bracket. stainless steel
stainless steel
Hose connections 3/4” 1” GAS
thread 3/4”
Ref.: 089978 Ref.: 089975
Ref.: 089974
Elbow
Hose 1/2” / Thread 3/8” Ref.: 250254
Ref.: 250251
Hose 3/4” / Thread 1/2” Ref.: 250255
Dimensions:
Elbow-Hose 3/4” Ref.: 250260 Ø80x60mm
147
SUBMERSIBLE GALLEY PUMPS IN LINE
PUMPS
881 921
Flow rate: 13,2 l/m. Flow rate: 15,8 l/m.
Hose Ø: 10 or 13mm. Hose Ø: 10 or 13mm.
Quick Connect adaptor available. Quick Connect adaptor available.
base Ø: 36mm. Height: 129mm. base Ø: 36mm. Height: 129mm.
12V - 3,6A Ref.: 070201 12V - 3,8A Ref.: 070205
Capacity:
8 l/min Service kit
Capacity: MK2
15 l/min
HoseØ: 13mm HoseØ: 13mm Ref.: 070909
Service kit
Service kit MK3
Ref.: 070157 Ref.: 070905 Ref.: 070158 Ref.: 070906
FT-1226 - with on/off Ref.: 070155 FT-1110 - with on/off Ref.: 070153
Ref.: 070151
Ref.: 070150
Capacity: 8 l/min
Hose Ø: 13mm. Hose Ø: 13mm.
148
MIGNON FAUCET MIGNON FAUCET STYLE FAUCETS
Hot/cold water mixer
Single folding faucet Chrome brass
Folding down spout.
Chrome brass. Spout folds down
Chrome brass
Spout Ø: 10 mm. Outlet Ø: 10 mm.
A B
98 190 Ref.: 076411 Single
160 190 Ref.: 076417 Mixer
Faucets
Single folding faucet Hot/cold water mixer
Chrome brass. Chrome brass
Spout Ø: Spout swivels and
14mm Spout swivels and folds down
Single faucet
folds down Chrome brass Spout Ø: 14mm
Spout Ø: 14mm
Ref.: 076410
Spout swivels and 210
folds down
147
Ref.: 076401 210
175
66
87
Ref.: 076402
111
SHORT SPOUT
Ref.: 076414 Ref.: 076005
A: 120mm
B: 216mm LARGE SPOUT: 180
C: 40mm Hot/cold water SHORT SPOUT: 150
Hot/cold water
mixer mixer
Chrome brass
A: 80mm
B: 170mm LARGE SPOUT
C: 40mm Chrome brass Ref.: 076006
Ref.: 076416
ABS - white
Ø12mm hose
RT-1000 - single RT-2000 RT-2007
hot/cold mixer hot/cold mixer
149
TC SHOWER COMBINED TC FAUCETS-SHOWERS
Combination Mixer/Shower. With retractable hose.
Flow control in the handset.
Shower with single lever Single lever valve mixer in chrome-brass.
chrome-brass mixer valve. 190cm hose
For bulkhead mounting.
- Hose:
EPDM-nylon
150cm
- PVC bracket White head
- Flow control in the handset Ref.: 076028
Ref.: 076009
Ref.: 076030
Ref.: 076413
Chrome head
FAUCET-SHOWER
Ref.: 076412
A
A: 310mm
B: 32mm
C: 45mm D
D: 520mm
Ref.: 076033 B
C
L
Ref.: 076350 160mm
Ref.: 076351 205mm Ref.: 070161
RT-1500 - single Ref.: 070103 Accessories: Shower wall bracket Ref.: 070110
RT-2500 - mixer hot/cold Ref.: 070104 Shower riser bar Ref.: 070109
150
SHOWER BOXES WITH MIXER SHOWER BOX WITH CHROME COVER
{
H/ C mixer Ref.: 076013
HORIZONTAL
cold only Ref.: 076015
Ref.: 076012
{
H/ C mixer
VERTICAL
cold only Ref.: 076014
Box dimensions:
Cut out: Ø57mm.
O.D.: Ø94mm.
Depth: 54mm
SHOWER MIXER
Chrome plated brass mixer.
PVC box with lid.
Box dimensions:
Cut out: Ø57mm.
O.D.: Ø94mm.
Depth: 40mm. Ref.: 076358
Mixer shower designed for the transom.
Model with hinged cover provides a neat finish to the unit.
SHOWER MIXER
Head, with OFF position to save water during the shower.
Chromed brass tap
RT-1648 - cold only Ref.: 070106 with ceramic mixer.
RT-2648 - hot/cold mixer Ref.: 070107 Built-in UV-resistant
RT-1649 - cold only ASA housing.
Ref.: 070111
RT-2658 - hot/cold mixer with cover Ref.: 070112 Ref.: 070119
151
SLEEK COMPACT SHOWER
Ref.: 070115
Faucets & Showers
Ref.: 062442
Ref.: 062435 PVC cylindrical box
152
SHOWER HANDSETS
1/2” M threaded
Shower accessories
L: 135mm L: 170mm L: 115mm L: 115mm
Ref.: 076355 Ref.: 076353 Ref.: 076027 Ref.: 076024
Con conexión
L: 115mm L: 165mm en codo. 1/2”
Ref.: 076023 Ref.: 076026 Ref.: 076031 Ref.: 070922
Connect.: Ø16mm threaded Connect.: 1/2”BSP threaded Shower wall bracket for Elegance
Ref.: 070108 Ref.: 070918 Ref.: 070920 Ref.: 070110
SHOWER HOSES
Reinforced white PVC. Chrome Terminals: 1/2”H conic - 3/8”H
Terminals: 1/2”H conic - 3/8”H Terminals: 1/2”H conic - 3/8”H
200cm
160cm
Ref.: 062439
Ref.: 062460
150cm
200cm White
Ref.: 062433 EPDM-nylon.
Ref.: 062432 400cm
260cm Ref.: 062461
Ref.: 062448 Terminals: 1/2”H conic - 15/100M
153
WASHDOWN OUTLETS WATER INTAKE WITH PRESSURE REDUCER
61
cut out
Ø78
64
Ref.: 062457
Ref.: 700079
154
ROUND SINKS
RECTANGULAR SINKS
Brush polished stainless steel
RECTANGULAR
100º elbow.
Ø 25mm
Ref.: 082038
Low profile for a total drainage. Ref.: 082070
A B C A B C
Ref.: 082096 60 70 32 Ref.: 082087 72 35 25
155
QUICK CONNECT SYSTEM
Easy to install and to use. Save money and time.
Thread adaptor
075029
WATER
Equal elbow Equal tee Stem HEATER
075002 075001 shut-off
valve
075025
Tank fitting
075024 Non return valve
075015
WATER TANK
Heater connector
075033
Surge damper
Strainer
070193
250250
The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle.
The Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system.
Unique ‘Double Gripper’ provides secure lifelong tube retention even at excessive pressures.
Collet has internal support ring ensuring O-ring seal is held in position and does not distort or leak under pressure.
The innovative, tube supporting, ‘cage collet’ design eliminates leaks where fittings are close to tight bends.
High integrity single piece moulding improves the reliability and strength of fittings.
Outer sleeve incorporates collet cover, thus preventing accidental tube release.
No collet clips are used thus the Whale system reduces costs, speeds up installation time and ensures complete installation
every time.
156
To assemble To disconnect
Heater
Simply push the tube into the fitting up Hold the collet in and
to the 2nd internal stop. pull out the tube.
Water
tank
Operation conditions: 12 bar at 20º C - 6 bar at 60º C
Ref.: 075001 Ref.: 075002 Ref.: 075003 Ref.: 075004 Ref.: 075005 Ref.: 075006 Ref.: 075007 Ref.: 075008 Ref.: 075019
Equal Tee Equal elbow Equal straight End plug 11 mm - 15 mm 12 mm - 15 mm Adaptor thread Adaptor thread Tap tail adaptor
(brass) stem adaptor stem adaptor M 1/2” NPT M 1/2” BSP M 1/2” BSP
(brass)
Ref.: 075009 Ref.: 075010 Ref.: 075012 Ref.: 075026 Ref.: 075013 Ref.: 075020 Ref.: 075015 Ref.: 075022 Ref.: 075021
Tap tail adaptor Adaptor Stem elbow Stem tee Stem adaptor Stem adaptor Stem adaptor Stem adaptor Stem adaptor
M 1/2” BSP M 3/4” BSP M 1/2” NPT M 3/8” NPT M 1/2” NPT F 1/4” NPT F 3/8” BSP
(brass) (brass)
(brass) (brass) (brass)
Ref.: 075011
Adaptor plastic
F 3/8” BSP
Ref.: 075014
Adaptor plastic
F 1/2” BSP Ref.: 075032 Ref.: 075016 Ref.: 075018 Ref.: 075017 Ref.: 075024 Ref.: 075027 Ref.: 075025
Ref.: 075029 Adaptor Adaptor Adjustable elbow Elbow adaptor Tank fitting Check valve Shut-off valve
Adaptor plastic F 1/2” BSP F 3/8” BSP F 1/2” BSP to F 1/2” BSP assembly
(brass) (brass) S-15
F 3/4” BSP
157
GREY WATER TANK
The Grey water tank is designed to be used as collection tank for waste water from
showers, sinks, dishwashing machines, etc.
The tank includes an Ultima Switch for automatic operation.
The tank is prepared for Viking Power 16 with pre-drilled holes
for the pump. Suitable for any pump 12/24V-max.20A.
Capacity: 10lit. 180
8 inlet connections:
3 x 25mmØ - 2 x 19mmØ - 3 x 38mmØ
Ref.: 250227 2 outlet connections: 280
158
WASTE WATER DISCHARGUE KIT
Compact gray water discharge. 3 inlet:
On and off automatically and 1x3/4”mmØ Dimensions: 286x210x140mm
has multiple outlets admission. Flow rate: 65l/min
1x3/4” or 1”Ø
Equipped with check valve at the 1x1” or 1 1/2”Ø
outlet. Equipped with a tight fitting 12V-3A Ref.: 080140
1 outlet:
lid to prevent odors and splashing. 24V-1,3A Ref.: 080141
1x3/4ӯ
GULPER IC PUMPS
Gulper IC –Electric Non clog Electric Grey
Waste Pump with intelligent control built in.
Easy installation - pre wired plug and play kit.
Reliability - No moving parts to clog. Long life-
GULLEY IC
GREY IC
STRAINER IC
159
GULPER 220
Self-priming diaphragm pump. Will
run dry without damage. Non-choke
valves. No filter to unblock. Double
outlet valve.
Max. suction lift: 3m
Max. discharge head: 3m
Max. suction+discharge: 4m
Capacity: 14 l/min.
12V - 2,4A
24V - 1,2A
Service kit
Connections: hose Ø19mm. Ref.: 070908
12V Ref.: 070001 Perfect for waste water of washbasins,
Clamp
24V Ref.: 070002 sinks and showers. Handles shower waste
Waste pumps
GULPER 320
Capacity: 21,5lit/min.
Hose connections: 3/4” or 1”.
High Capacity Waste Pump - Fast Drainage and space saving on board.
Ideal where bilge space is limited-smallest footprint strainer. Head rotates 360 degrees to suit your installation. High - dry and protected.
Remote mounting allows easy access. Long life - runs dry without damage. Meets requirement for primary bilge pump for boats up to 12m
(39.4ft) length. Easy to install - including uneven surfaces. Secure fit -new wrap around mounting feature, only 3 screws to secure. Reliable
operation - Self priming. Easy maintenance -patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired
position.
GULPER GROUPER
25 l/min
Consumption: 7,2A
160
GULPER TOILETS
For holding tank electric pump out/discharge.
Pumps un-macerated toilet waste. Runs dry without
damage. Self-priming diaphragm pump up to 3 m.
Virtually unblockable. Rotatable inlet and outlet -
allows you to install in awkward locations. Pumps
a mixture of air and waste. Easy to maintain. Ideal
for holding tanks and vacuum systems.
Max. suction lift: 3m
Max. discharge head: 3m
Max. suction+discharge: 3m Deck pump Vent line
Capacity: 28 l/min out fitting
Vent line
Gulper 12V - 4A
Holding
tank Toilet Ref.: 070003
Service kit pump
Whale 24V - 2A
Sea thru-hull
Waste pumps
Ref.: 070904 Connections: hose Ø38mm diverter
discharge Ref.: 070004
valve
V A Capacity hose Ø
161
PUMPS “VIKING POWER 32”
MACERATOR PUMPS
TA3P10-19
Ø38
FLEXIBLE IMPELLER PUMPS FIP25SI
Flexible impeller pump for bilge,
wash down, fire fighting, septic 200
handling and water circulation
duties.
316 stainless steel pump.
Connections: 1”BSP thread. 150
Neoprene impeller.
Mechanical seal.
Capacity at 0,3 bar: 74 l/m.
Capacity at 1,0 bar: 67 l/m.
162
“AquaT” TOILETS
The fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with
corrosion resistant parts throughout, the Johnson Pump AquaT™ marine toilet, is quiet, robust and easy to clean. The AquaT™
toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered
piston pump that can be mounted for either left-hand or right-hand use. Quiet, hygienic and reliable, the Johnson Pump
AquaT™ marine toilet is perfect for almost any marine toilet room.
MANUAL “COMPACT”
650
Ref.: 252001
460
Ø19
345
105
Ø38
Toilets
ELECTRIC “COMPACT”
335
Ø38
or
Ø25
93
85
365 455
“PREMIUM” LOW
330 410
163
PORTABLE TOILETS
A very simple system that is both strong and easy to clean. Compact, it can be completely dismantled,
including the valve, for thorough and total cleaning. Sturdy and solid handle for easy transportation. Large
waste cap: no drainpipe, emptying is easy and hygienic, no clogging. Each tank is electronically tested for
a perfect seal. Handy side clips to connect the upper and lower tanks. Colour: Grey.
MANUAL TOILET
Toilets
Ref.: 045101
Spare parts
440 Pump service kit:
420 includes membranes and
gaskets.
ELECTRIC TOILETS
China seat cover. Self-priming double action pump. ABS case pump, double impeller and rotating
grinder. The waste pump cuts the waste before it is discharged through the outlet line. Operation
is simple.
Spare parts
24V Ref.: 045103
Engine 24V Ref.: 045116
440 Pump service kit:
420
includes impellers, bearings and gaskets.
Ref.: 045111
164
450
MANUAL TOILET
Twist ‘N’ Lock
410 Twist ‘N’ Lock action safety handle guards against flooding
and waste backflow by locking the waste outlet valve shut.
White vitreous china bowl, enamelled wooden seat
and cover. Reversible pump mounting for left or right-handed
installation. Crevice-free contours and smooth mouldings for
340
added hygiene.
Multi-angled discharge elbow for ease of installation.
Corrosion-resistant materials for fresh or salt water service.
All fastenings face front or top for ease of maintenance.
Ref.: 045104
Toilets
Big size bowl HiBoy.
Ref.: 900001
ELECTRIC TOILET
White vitreous china bowl.
Baked enamel seat and cover, household size.
Flexible impeller flush pump.
Permanent magnet type motor, fully enclosed, with
stainless steel shaft.
High capacity macerator and bowl scavenger pump.
Built-in back flow preventer.
Service kit
Ref.: 045119 Service kit
Ref.: 045126
165
SANIMARIN ELECTRIC TOILETS
SANIMARIN 31 - CONFORT
Excellent alternative to hand pump products, the SANIMARIN
31 toilet is the prefect, simple answer to lack of space. The
electric switch COMFORT (SN 31 Comfort ) features 2 positions:
a flushing positon and maceration-puming position. The duration
of each cycle is controlled by the user to suit their requirements.
Maximun succion height: 3m, 1,7bar pressure. Outlet hose:
Ø38mm.
V A W
Ref.: 252101 12 25 300
Ref.: 252102 24 15 360
SANIMARIN 31 - SHORT
Toilets
V A W
Ref.: 252103 12 25 300
Ref.: 252104 24 15 360
SANIMARIN 35 - CONFORT
With its profiled lines, the Sanimarin 35 adapts to the
hull’s shape. Its resolutely modern lines and limited
weight allows it to be fitted on all types of boat. Maxi-
mun succion height: 3m, 1,7bar pressure. Outlet hose:
Ø38mm.
V A W
Ref.: 252105 12 22 260
Ref.: 252106 24 14 340
V A W
Ref.: 252107 24 15 360
Committed with
quality
”ROYAL FLUSH” TOILETS
ROYAL FLUSH NEOCLASSIC All Royal Flush toilets are built around a simple, no nonsense, water jet macerator.
The reliability of this technology has been proven for over a decade and has been
Toilets
168
Dimensions in mm.
TITAN WATER TANKS
A B C Capacity
A B C Capacity
Water tanks
500 220 350 32 lit. Ref.: 062234
B C
650 220 350 42 lit. Ref.: 062235
A B C Capacity B
635 400 280 57 lit. Ref.: 062238
FLEXIBLE TANKS
Includes connectors.
Dimensions Capacity
169
CLEAR WATER HOSES
PVC hose with embedded reduced pitch galvanised steel spiral,
for suction and delivery of food liquids.
Int. Ø
Ref.: 235011 10 Int. Ø Int. Ø
Ref.: 235012 12 Ref.: 235016 20 Ref.: 235020 38
Ref.: 235013 14 Ref.: 235017 25 Ref.: 235021 40
Ref.: 235014 16 Ref.: 235018 30 Ref.: 235022 45
Operating temperature -10º/+60ºC. CEE 90/128. Ref.: 235015 18 Ref.: 235019 35 Ref.: 235023 50
SANITATION HOSES
Hoses & Accessories
Extra-flexible hose, whose structure and compounds assure a perfectly smooth tube, antiadherent, odourless, resistant to growing of bacteria
and with low friction factor. Used for all head and holding tank connections and suitable for acids and bases. The tube is complying with
European food norms and F.D.A. standards; for this reason the hose can be used in all the cases where a food quality us prerequisite.
Complies ISO 1307 and ISO 8099:2000. 5, 6.1.10 and 6.4 Good resistance to mechanical stresses.
170
NYLON 6.6 CLAMPS HIGH PRESSURE CLAMPS
CLAMPS
Clamps
Ref.: 128102 24,21-27,76 6,35 16-27 9 40-43 18
Ref.: 128004 Ref.: 128024
Ref.: 128103 26,19-30,15 7,94 20-32 12 43-47 20
Ref.: 128005 Ref.: 128025
Ref.: 128104 31,75-36,20 7,94 25-40 12 47-51 20
Ref.: 128007 Ref.: 128026
Ref.: 128105 35,71-40,89 8,73 30-45 12 51-55 20
Ref.: 128008 Ref.: 128027
Ref.: 128106 40,46-46,02 8,73 35-50 12 55-59 20
Ref.: 128009 Ref.: 128028
Ref.: 128010 40-60 12 Ref.: 128029 59-63 20
Ref.: 128011 50-70 12 Ref.: 128030 63-68 20
Ref.: 128012 60-80 12 Ref.: 128031 68-73 25
Ref.: 128013 70-90 12 Ref.: 128032 73-79 25
Ref.: 128014 80-100 12 Ref.: 128033 79-85 25
Ref.: 128015 90-110 12 Ref.: 128034 86-91 25
Ref.: 128016 100-120 12 Ref.: 128035 91-97 25
Ref.: 128017 130-150 12 Ref.: 128036 97-104 25
Ref.: 128018 160-180 12 Ref.: 128037 104-112 25
Ref.: 128046 112-121 25
Ref.: 128047 121-130 25
Meeting current and future requirements, Ref.: 128038 130-140 30
Ref.: 128039 140-150 30
with high corrosion resistance, the Ref.: 128040 150-162 30
171
MALE HOSE CONNECTIONS
BRASS CR BRASS
GAS thread hose ø GAS thread hose ø GAS thread hose ø
mm mm mm
3/ ” 1/ ” Ref.: 089219 6 1
1 /4” Ref.: 089335 30
8 Ref.: 089717 10 8
3/ ”
1/ ” Ref.: 089220 8
8 11/4” Ref.: 089336 32
Plumbing hardware
8 Ref.: 089719 12
1/ ” Ref.: 089221 10
8 11/4” Ref.: 089337 35
3/ ” Ref.: 089718 14
8 1/ ” Ref.: 089222 8
4 11/4” Ref.: 089338 38
1/ ”
2 Ref.: 089720 18 1/ ” Ref.: 089223 10
4 11/4” Ref.: 089339 40
1/ ”
2 Ref.: 089730 20 1/ ” Ref.: 089224 12
4 11/2” Ref.: 089340 38
3/ ” Ref.: 089721 22
3/ ”
8
Ref.: 089319 10 11/2” Ref.: 089341 40
4
3/ ”
3/ ”
8
Ref.: 089226 12 11/2” Ref.: 089342 45
4 Ref.: 089731 25
1/ ”
2
Ref.: 089320 10 11/2” Ref.: 089343 50
1” Ref.: 089722 27 1/ ” Ref.: 089321 12 2” Ref.: 089344 50
2
1” Ref.: 089732 30 1/ ” Ref.: 089322 13 2” Ref.: 089345 51
2
11/4” Ref.: 089723 38 1/ ”
2
Ref.: 089323 15 2” Ref.: 089346 60
1/ ” Ref.: 089324 16 1
2 /2” Ref.: 089347 60
11/4” Ref.: 089733 40 2
1/ ” Ref.: 089325 19 21/2” Ref.: 089349 64
11/2” Ref.: 089726 35 2
1/ ”
2
Ref.: 089326 20 21/2” Ref.: 089348 70
11/2” Ref.: 089727 38 3/ ” Ref.: 089327 16 3” Ref.: 089231 75
4
11/2” Ref.: 089734 45 3/ ” Ref.: 089328 19 3” Ref.: 089232 76
4
2” Ref.: 089735 50 3/ ” Ref.: 089329 20 3” Ref.: 089233 80
4
Ref.: 089725 58 3/ ” Ref.: 089330 25 3” Ref.: 089234 90
2” 4
1” Ref.: 089331 25 4” Ref.: 089235 100
1” Ref.: 089332 30
1” Ref.: 089333 32
1” Ref.: 089334 35
172
VALVES
Chrome brass with galvanised steel handle. CR brass with SS handle. Naval bronze with stainless steel handle.
/ ” Ref.: 089609
3 8 / ” Ref.: 089600
3 8 / ” Ref.: 089641
3 8
/ ” Ref.: 089610
1 2 / ” Ref.: 089601
1 2 / ” Ref.: 089642
1 2
/ ” Ref.: 089611
3 4 / ” Ref.: 089602
3 4 / ” Ref.: 089643
3 4
Plumbing hardware
VALVES CHECK VALVE PUSH BUTTON COCK
316 stainless steel valve and handle. Brass.
3
/8” GAS threads.
/ ” Ref.: 089540
1 2
/ ” Ref.: 089541
3 4
/ ” Ref.: 089651
3 4
1” Ref.: 089542
1” Ref.: 089652
11/4” Ref.: 089543
1 / ” Ref.: 089653
1 4
11/2” Ref.: 089544
11/2” Ref.: 089654 Brass Ref.: 231010
2” Ref.: 089545
/ ” Ref.: 089619
3 8 / ” Ref.: 089629
3 8
/ ” Ref.: 089620
1 2 / ” Ref.: 089630
1 2
11/4” Ref.: 089623 11/4” Ref.: 089633
/ ” Ref.: 089621
3 4 / ” Ref.: 089631
3 4
11/2” Ref.: 089624 11/2” Ref.: 089634
1” Ref.: 089622 2” Ref.: 089625 1” Ref.: 089632 2” Ref.: 089635
For 2 suction or 2
discharge points.
Connections:
hose Ø 38mm.
hose Ø mm
173
ELBOW 90º-F/F ELBOW 90º-M/F ELBOW 45º-F/F
3
/8” Ref.: 089361 3
/8” Ref.: 089371 3
/8” Ref.: 089070
1
/2” Ref.: 089101 Ref.: 089362 1
/2” Ref.: 089107 Ref.: 089372 1
/2” Ref.: 089113 Ref.: 089071
3
/4” Ref.: 089102 Ref.: 089363 3
/4” Ref.: 089108 Ref.: 089373 3
/4” Ref.: 089114 Ref.: 089072
1” Ref.: 089103 Ref.: 089364 1” Ref.: 089109 Ref.: 089374 1” Ref.: 089115 Ref.: 089073
1 /4” 1
Ref.: 089104 Ref.: 089365 1 /4” 1
Ref.: 089110 Ref.: 089375 1 /4” 1
Ref.: 089116 Ref.: 089074
1 /2” 1
Ref.: 089105 Ref.: 089366 1 /2” 1
Ref.: 089111 Ref.: 089376 1 /2” 1
Ref.: 089117 Ref.: 089075
Plumbing hardware
2” Ref.: 089106 Ref.: 089367 2” Ref.: 089112 Ref.: 089377 2” Ref.: 089118 Ref.: 089076
2 1/2” Ref.: 089368 2 1/2” Ref.: 089378 2 1/2” Ref.: 089077
3” Ref.: 089369 3” Ref.: 089379 3” Ref.: 089078
4” Ref.: 089370 4” Ref.: 089360 4” Ref.: 089079
ELBOW 45º-M/F TEE-F/F/F COUPLING-F/F
Brass CR brass
1
/4” Ref.: 089250
3
/8” Ref.: 089251
1
/2” Ref.: 089137 Ref.: 089252 Brass Brass Brass CR brass
3
/4” Ref.: 089138 Ref.: 089253 /2”
1
Ref.: 089143 1/2” Ref.: 089155 3
/8” Ref.: 089421
1” Ref.: 089139 Ref.: 089254 /4”
3
Ref.: 089144 3/4” Ref.: 089156 1
/2” Ref.: 089149 Ref.: 089422
1 /4”1 Ref.: 089140 Ref.: 089255 1” Ref.: 089145 * 3/8” Ref.: 089431 3
/4” Ref.: 089150 Ref.: 089423
1 /2”1 Ref.: 089141 Ref.: 089256 1 1/4” Ref.: 089146 1” Ref.: 089157 1” Ref.: 089151 Ref.: 089424
2” Ref.: 089142 Ref.: 089257 1 /2”
1
Ref.: 089147 1 /2”
1
Ref.: 089158 1 1/4” Ref.: 089152
2 1/2” Ref.: 089258 2” Ref.: 089148 2” Ref.: 089159 1 /2”1
Ref.: 089153
3” Ref.: 089259 2” Ref.: 089154
* CR
4” Ref.: 089260
174
REDUCER F/M
Brass CR Brass
1
/2”-1/4” Ref.: 089182 11/4”-1” Ref.: 089187 1
/2”-3/8” Ref.: 089406 11/2”-1” Ref.: 089412
1
/2”- /8” Ref.: 089183
3
1 /2”-1 /4” Ref.: 089188
1 1 3
/4”- /2” Ref.: 089407
1
1 /2”-1 /4” Ref.: 089413
1 1
3
/4”- /2” Ref.: 089184
1
2”-1 /2” Ref.: 089189
1
1”- /2”
1
Ref.: 089408 2”-11/2” Ref.: 089414
1”-1/2” Ref.: 089185 1”- /4”
3
Ref.: 089409
1”-3/4” Ref.: 089186 11/4”-3/4” Ref.: 089410
11/4”-1” Ref.: 089411
Plumbing hardware
Brass CR Brass
1
/2”-1/8” Ref.: 089160 11/4”-3/4” Ref.: 089167 1
/2”-3/8” Ref.: 089380 2”-11/2” Ref.: 089388
CR Brass
1
/2”-1/4” Ref.: 089161 11/4”-1” Ref.: 089168 3
/4”-1/2” Ref.: 089381 21/2”-2” Ref.: 089389
/2”-3/8” 11/2”-1” 1”-1/2” 3”-21/2” Ref.: 089390
3
/8” Ref.: 089261 1 1/2” Ref.: 089266
1
Ref.: 089162 Ref.: 089169 Ref.: 089382
3
/4”-1/4” Ref.: 089201 11/2”-11/4” Ref.: 089170 1”-3/4” Ref.: 089383 4”-3” Ref.: 089391
1
/2” Ref.: 089262 2” Ref.: 089267
3
/4”-3/8” Ref.: 089163 2”-1” Ref.: 089171 11/4”-1” Ref.: 089384 3
/4” Ref.: 089263 2 /2” Ref.: 089268
1
3
/4”-1/2” Ref.: 089164 2”-11/4” Ref.: 089172 11/2”-1” Ref.: 089385 1” Ref.: 089264 3” Ref.: 089269
1”-1/2” Ref.: 089165 2”-11/2” Ref.: 089173 11/2”-11/4” Ref.: 089386 1 /4” Ref.: 089265 4”
1 Ref.: 089270
1”-3/4” Ref.: 089166 2”-11/4” Ref.: 089387
Naval bronze
Brass CR Brass
1
/2”-1/4” Ref.: 089175 11/4”-1” Ref.: 089179 1”-1/2” Ref.: 089397 2”-11/4” Ref.: 089401 1”-3/4” Ref.: 089418
1
/2”-3/8” Ref.: 089176 11/2”-11/4” Ref.: 089180 1”-3/4” Ref.: 089398 2”-11/2” Ref.: 089402 11/4”-1” Ref.: 089419
3
/4”-1/2” Ref.: 089177 2”-11/2” Ref.: 089181
Brass CR Brass A B C
Ref.: 089310 /
3 8”
316 Stainless 58 40
Ref.: 089710 Ref.: 089311 /
1 2”
steel
Ref.: 089711 Ref.: 089312 /
3 4” 66 49
Spare parts
Ref.: 089712 Ref.: 089313 1” 70 56
Thread
Ref.: 089713 Ref.: 089314 1 1/ 4” 76 65
1
/2” Ref.: 089190
Ref.: 089708 1 1/ 4” 95 65
A B C 3
/4” Ref.: 089191
Ref.: 089714 Ref.: 089315 1 1/ 2” 78 72
Ref.: 089520 /
1 2” 59 34 1” Ref.: 089192
Ref.: 089715 Ref.: 089316 2” 95 85
Ref.: 089521 /
3 4” 69 41 Washer
C
Ref.: 089522
C Ref.: 089317 21/2”
1” 73 48 1
/2” Ref.: 089196
Ref.: 089523 11/4” 81 59 Ref.: 089318 3”
B
3
/4” Ref.: 089197
Ref.: 089524 11/2” 86 68
B Ref.: 089430 4”
1” Ref.: 089198
A Ref.: 089525 2” 119 93 A 1 1/2” Ref.: 089195
175
SLOTTED SCOOPS
Ø mm CR Brass
90 Ref.: 089850 Ref.: 089451
100 Ref.: 089851 Ref.: 089450
Plumbing hardware
Ref.: 089552 1” 62 98 73
Ø150mm Ø210mm
Ref.: 089857 Ref.: 089854 INTAKE STRAINERS
3
/8” Ref.: 089202 11/2” Ref.: 089207
1
/2” Ref.: 089203 2” Ref.: 089208 A B C
3
/4” Ref.: 089204 2 /2” Ref.: 089209
1 /
1 2” 57 48 Ref.: 231017
176
Spare parts
/ ” ELBOW WATER STRAINER
1 2 ABS WATER FILTERS
Brass
Cover
Ref.: 231072
1 1/2”
/”
1 2
19,5
136,5
Water strainers
Capacity Hose Ø
Ref.: 231025
150 l/m 3
/ 4” Ref.: 230001
Capacity at 10 bar: 9.550 l/h
Fitting bracket O-ring
Capacity at 0,1 bar: 2.900 l/h 300 l/m 1 / 2”
1
Ref.: 230002
Ref.: 231069 Ref.: 231065
D Brass
A
Spare parts
Capacity l/h
0,1 bar 10 bar A B C D
Basket Polycarbonate cover O-ring Cover bolts
2.050 7.000 98 138.5 130 /”
1 2
Ref.: 231030 Ref.: 231046 Ref.: 231055 Ref.: 231060 Ref.: 231066
for filters
3.800 13.000 132 172 150 /”
3 4
Ref.: 231031 { up to 11/2”
Ref.: 231047 Ref.: 231056 Ref.: 231061
5.800 20.000 132 172 150 1” Ref.: 231032
9.900 33.900 155 225 205 1 /”
1 4
Ref.: 231033 { Ref.: 231049 Ref.: 231057 Ref.: 231062
11.750 40.350 155 225 205 1 /”
1 2
Ref.: 231034
19.700 67.600 192 273 226 2” Ref.: 231035 Ref.: 231051 Ref.: 231058 Ref.: 231063
30.500 104.600 240 295 275 2” 1/2 Ref.: 231036 Ref.: 231052 Ref.: 231071
{ Ref.: 231064
41.350 142.000 240 316 295 3” Ref.: 231037 Ref.: 231053 Ref.: 231059
90.000 280.000 258 345 380 4” Ref.: 231038 Ref.: 231054 Ref.: 231070
177
ELBOW WATER STRAINER
Brass
B D
C
Bracket
3/4” y 1” 11/4”, 11/2” y 2” A
Ref.: 231067 Ref.: 231068 D
Water strainers
Cover screws
Up to 11/2” Ref.: 231066
strainers
Spare parts
Capacity l/h
0,1 bar 10 bar A B C D Bascket Polycarbonate cover O-Ring
4.000 13.500 150 30 142.5 3/4” Ref.: 231020 { Ref.: 231040 Ref.: 231056 Ref.: 231061
5.000 16.800 150 30 142.5 1” Ref.: 231021
8.400 28.400 177 38 203 1 1/4” Ref.: 231022 { Ref.: 231042 Ref.: 231057 Ref.: 231062
10.400 35.200 177 38 203 1 1/2” Ref.: 231023
20.400 69.200 218 38 215 2” Ref.: 231024 Ref.: 231044 Ref.: 231058 Ref.: 231063
Bronze
Dn (J) A B C D E F G H I
DN50 233 150 272 193 M8 6,5 M8 165 1/4” Ref.: 231101
DN65 284 191 313 240 M6 6,5 M8 185 3/4” Ref.: 231102
DN80 305 205 343 233 M6 6,5 M8 200 3/4” Ref.: 231103
DN100 392 282 380 258 M8 9 M10 220 1” Ref.: 231104
DN125 434 309 380 267 M10 9 M8 250 1” Ref.: 231105
178
ELBOW WATER STRAINER
Bronze
Flange and cover
on this page.
Water strainers
Dn (J) A B C D E F
DN50 225 243 81 7 M8 165 Ref.: 231111
DN65 265 255 93 8,5 M8 185 Ref.: 231112
DN80 271 295 120 8,5 M8 200 Ref.: 231113
DN100 298 327 125 11 M8 220 Ref.: 231114
DN125 327 392 - - M10 250 Ref.: 231115
Dn A B C D
DN50 29 125 165 18 Ref.: 231117
DN65 33,5 145 185 18 Ref.: 231118
DN80 35,5 160 200 18 Ref.: 231119
DN100 39,5 180 220 18 Ref.: 231120
DN125 40 210 250 18 Ref.: 231121
Dn A B
DN50 186 9 Ref.: 231131
DN65/80 218 9 Ref.: 231132
DN100 218 9 Ref.: 231133
DN125 239 9 Ref.: 231134
179
ELBOW THRU-HULLS WITH HOSE CONNECTION THRU-HULLS WITH HOSE CONNECTION
Reinforced nylon thru-hulls Reinforced nylon thru-hulls with 316 stainless steel rings.
with fiberglass and 316 ASTM D638 and ASTM D790 tested.
stainless steel rings.
ASTM D638 and ASTM D790
tested.
A B C D E A B C D E
Ref.: 082052 48 81 33 28 3/4”
Ref.: 082055 3/4” 86 33 48 28
Ref.: 082066 48 95 33 50 1” Ref.: 082056 1” 86 33 48 28
Ref.: 082053 60 115 40 28 11/8” Ref.: 082045 1 1/4” 103 41 60 33
Ref.: 082054 60 119 40 33 11/2” Ref.: 082057 1 1/2” 103 41 60 33
Thru-hulls
180
THRU-TRANSOM THRU-HULLS WITH SCUPPER VALVE
WITH SCUPPER VALVE
Fiberglass reinforced nylon with 316
stainless steel ring.
ASTM D638 and ASTM D790 tested.
A B C D E
B A B C D
C A B C D E
Ref.: 082088 5/8” 19 12 30
11/2” 45 60 128 55 Ref.: 082061
D
Ref.: 082089 3/4” 22 15 35
PVC
100º elbow-right 100º elbow-left
For 11/2” hose Ref.: 082080 Ref.: 082079
Ø 1”
Ref.: 082048 For 11/8” hose Ref.: 082097 Ref.: 082098
Max length 54mm
181
PIPE THREAD DRAIN GRATES CHROME BRASS DRAIN GRATES
Removable grate.
A B C D
Drains
B
A B C
C
Ref.: 082074 90 75 38
D
A
With ball Without ball 32mm Ø interior hose (38mm Ø cut out)
A B C D E
and up to 98mm length, For outboard
Ref.: 082084 Ref.: 082082 11/2” 75 20 60 116 engine well. Made of stainless steel and
nylon.
Ref.: 082085 Ref.: 082083 2” 75 20 73 116 Ref.: 082122
50
39
A B C D 10
12 Ref.: 082050 50 25 15 12
Ref.: 082051 Ref.: 082047 25
25 Ref.: 082091 50 25 15 60
182
BILGE BOX WITH MESH BILGE BOX WITH MESH BILGE BOX WITH MESH
Brass
/4”.
3
1”. Base:
Dimensions: 158x71mm. Dimensions: 55x55mm
55x55mm
Ø 3/ 4”
Ref.: 089927 Ref.: 089928 Ref.: 089923
Bilge strainers
Ø3/4” Ref.: 089925
Ø1” Ref.: 089926 Plastic.
BILGE STRAINER
1” or 11/2”
Ref.: 250133
Ensuring
your
peace of mind
183
F35B-8-3/8” Body: bronze.
Impeller: neoprene.
Shaft: stainless steel mounted with
Ref.: 250001 permanently lubricated double ball
bearings.
960 l/h at 3m (0,3 bar) at 2000rpm (*) Seal: mechanical.
Cam: full (on request: reduced).
Connections: 3/8”BSP.
Dimensions: 109mm L x 80mm W x 60mm H.
Shaft Ø: 12mm. Spare impeller Ref.: 250303
Body: bronze.
F4B-8-3/8” Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with
permanently lubricated double ball
Impeller pumps
Body: bronze.
F5B-8-3/4” Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with
permanently lubricated double ball
Ref.: 250003 bearings.
Seal: mechanical.
2.760 l/h at 3m (0,3 bar) at 2000rpm (*) Cam: full (on request: reduced).
Spare impeller:
Connections: 3/4”BSP.
Dimensions: 151mm L x 106mm W x 88mm H. neoprene Ref.: 250311
Shaft Ø: 17mm.
nitrile Ref.: 250312
Body: bronze.
F7B-8-1” Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with
permanently lubricated double ball
Ref.: 250004 bearings.
Seal: mechanical.
Cam: full (on request: reduced).
6.420 l/h at 3m (0,3 bar) at 2000rpm (*)
Spare impeller:
Connections: 1”BSP.
Dimensions: 170mm L x 120mm W x 93mm H. neoprene Ref.: 250315
Shaft Ø: 17mm.
nitrile Ref.: 250316
Body: bronze.
F8B-8-1 1/2” Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with
permanently lubricated double ball
Ref.: 250005 bearings.
Seal: mechanical.
Cam: full (on request: reduced).
16.740 l/h at 3m (0,3 bar) at 2000rpm (*)
Spare impeller:
Connections: 11/2”BSP.
Dimensions: 217mm L x 160mm W x 124mm H. neoprene Ref.: 250317
Shaft Ø: 24mm.
nitrile Ref.: 250318
(*) Flow rates are for pumps with neoprene impeller, full cam and water at 20ºC.
184
Body: bronze. Vacuum switch connections.
Impeller: neoprene (nitrile optional). F5B-3000-3/4”
Shaft: stainless steel.
Seal: mechanical.
Ref.: 250010
Cam: full (on request: reduced).
Pedestal: Cast iron with permanently lubricated
double ball bearings.
Impeller pumps
Seal: mechanical.
Cam: full (on request: reduced). Ref.: 250011
Pedestal: Cast iron with permanently lubricated
double ball bearings.
Body: bronze. Vacuum switch connections. 16.740 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene (nitrile optional). Shaft Ø: 24mm
neoprene Ref.: 250317
Shaft: stainless steel.
Spare impeller: nitrile
Seal: mechanical. Ref.: 250318
Cam: full (on request: reduced).
Pedestal: Cast iron with permanently Connections: 11/2” BSP.
lubricated double ball bearings. Ref.: 250046
Body: bronze. Vacuum switch connections. 22.560 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene (high pressure neoprene
optional). Shaft Ø: 24mm
Shaft: stainless steel.
Seal: mechanical.
Cam: full (on request: reduced). Connections: 2” BSP.
Pedestal: Cast iron with permanently
lubricated double ball bearings. Ref.: 250047
Spare impeller:
neoprene Ref.: 250320
high pressure
neoprene
Ref.: 250321
Body: bronze.
Ref.: 250031
Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with
permanently lubricated double ball
6.420 l/h at 3m (0,3 bar) at 2000rpm (*) bearings.
Cam: full.
Connections: 1”BSP. Pulley: 1xA Ø 110mm.
Dimensions: 205mm L x 120mm W x 110mm H.
Seal: mechanical.
Spare
Spare impeller: impeller:
Neoprene Neoprene
Ref.: 250315 Ref.: 250317
Nitrile Nitrile
Ref.: 250316 Ref.: 250318
Body: bronze. Vacuum switch
connections. 6.420 l/h at 3m (0,3 bar) at 2000rpm (*) 16.740 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene (nitrile optional)
Shaft: stainless steel mounted with Connections: 1”BSP. Connections: 11/2”BSP.
permanently lubricated double ball Dimensions: 165mm L x 120mm W x 93mm H. Dimensions: 225mm L x 160mm W x 124mm H.
bearings. Seal: mechanical. Seal: mechanical.
Cam: full (on request: reduced).
(*) Flow rates are for pumps with neoprene impeller, full cam and water at 20ºC.
186
Body: bronze. Vacuum switch
connections.
F7B-5000-1”
Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with Ref.: 250020
permanently lubricated double ball
bearings.
6.420 l/h at 3m (0,3 bar) at 2000rpm (*)
Seal: mechanical.
Cam: full (on request: reduced).
Connections: 1”BSP.
Spare impeller: Dimensions: 226mm L x 120mm W x 93mm H.
neoprene Ref.: 250315
Clutch to be ordered separately.
nitrile Ref.: 250316
Body: bronze. Vacuum switch connections. 16.740 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene (nitrile optional).
Shaft: stainless steel mounted with Clutch to be ordered separately.
Clutch pumps
permanently lubricated double ball bearings.
Seal: mechanical. Spare impeller: neoprene Ref.: 250317
Cam: full (on request: reduced).
nitrile Ref.: 250318
Ref.: 250021
Ref.: 250022 Dimensions:
265 mm L
Dimensions: 152 mm W
265 mm L 154 mm H
198 mm W
151 mm H Connections: 11/2” BSP. Ref.: 250046
Body: bronze. Vacuum switch connections. 22.560 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene (high pressure neoprene
optional). Clutch to be ordered separately.
Shaft: stainless steel mounted with permanently
lubricated double ball bearings.
Seal: mechanical.
Cam: full (on request: reduced). Connections: 2” BSP.
Ref.: 250047
Spare impeller: neoprene Ref.: 250320
high pressure
neoprene Ref.: 250321
Dimensions: Dimensions:
Dimensions:
290 mm L 290 mm L
290 mm L
200 mm W 192 mm W
152 mm W
151 mm H 157 mm H
175 mm H
Connections:
2”BSP
F95B-5000-2 1/2”
Body: bronze. Ref.: 250026 32.112 l/h at 3m (0,3 bar) at 2000rpm (*)
Impeller: neoprene.
Shaft: stainless steel mounted with permanently Connections: 21/2”BSP.
lubricated double ball bearings. Dimensions: 358mm L x 295mm W x 20mm H.
Seal: mechanical. The port adaptors can be fitted either vertically
Cam: full (on request: reduced). or horizontally.
(*) Flow rates are for pumps with neoprene impeller, full cam and water at 20ºC.
187
SEAWATER PUMPS FOR ENGINE COOLING
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller
pump is its self-priming ability. Are ideal for inboard engine cooling systems and are available in several different styles and sizes to satisfy
different cooling system needs.
SPX, Johnson Pump brand, is the original equipment pump supplier to the largest manufacturers world-wide of inboard engines.
188
Ref.: 260003 Ref.: 260004 Ref.: 260005 Ref.: 260006
JOHNSON 10-35038-1 JOHNSON 10-32058-1 JOHNSON 10-24232-1 JOHNSON 10-35157-3
Original ref.: 831178-9 Original ref.: 857451-9, Original ref.: 833415-3
856952-7, 856513-7 833883-2
VOLVO engines:
AQ 165A, 170A,B,C VOLVO engines: VOLVO engines:
MD 21A, MD 21B V6 and V8 MD 11C, 1A,B, MD 2A,B
Engine cooling
Ref.: 260007 Ref.: 260008 Ref.: 260009 Ref.: 260010
Original ref.: 858065-6 Original ref.: 840557-3 Original ref.: 858150-6 Original ref.: 858469-0
189
COMPACT PUMPS
Pump spare parts
Service kit Impeller (1) Cam Camscrew Seal Gasket Endcover Endcover screw Wearplate Shaft Bearing
Pump type (2) (3) (4) (5) (6) (7) (8) (9) (10)
neoprene nitrile neoprene nitrile
F35B-8 250332 250303 250598 250835 251007 250608 250607 250884 250631 250628 250945
F4B-8 250335 250336 250305 250306 250560 250836 251007 250562 250564 250884 250628 250946
F5B-8 250339 250340 250311 250312 250563 250837 250996 250567 250564 250884 250623 250944
F7B-8 250344 250345 250315 250316 250592 250833 250996 250584 250581 250858 250623 250944
F8B-8 250348 250350 250317 250318 250593 250834 251054 250576 250573 250862 250575 250495 250955
F7B-5001 250344 250345 250315 250316 250592 250833 250996 250584 250581 250858 250629 250944
F7B-5001-MC 250344 250345 250315 250316 250592 250833 250996 250584 250581 250858 251127 250944
F8B-5001 250348 250350 250317 250318 250593 250834 251054 250576 250573 250862 250575 250496 250955
F8B-5001-MC 250348 250350 250317 250318 250593 250834 251013 250576 250573 250862 250575 251128 250955
251054
Service kit includes: Impeller, gasket, seal and endcover screws. Cam reference is for full type (1/1).
Service kit Impeller (1) Cam Camscrew Seal Gasket Endcover Endcover screw Wearplate Shaft Bearing Bearing seal
Pump type
neoprene nitrile neoprene nitrile (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
F5B-3000 250338 250337 250311 250312 250563 250837 251125 250567 250564 250836 250565 250505 250948 251011
250989
F7B-3000 250342 250343 250315 250316 250592 250833 251125 250584 250581 250837 250583 250505 250948 251011
250989
250834 250846 250575 250955 251001
F8B-3000 250346 250347 250317 250318 250593 251126 250576 250573 250497 250990
250352 250320 251001
F9B-3000 250353 250321
250602 250834 251126 250576 250573 250846 250575 250497 250955 250990
F95B-3000 250355 250319 250748 250865 NO 250669 250519 250862 250575 250538 250962 NO
250953
F7B-5000 250342 250343 250315 250316 250592 250833 251125 250584 250581 250837 250583 250486 250948 250989
F8B-5000 250346 250347 250317 250318 250593 250834 251126 250576 250573 250863 250575 250498 250955 250990
250352 250320 251001
F9B-5600 250353 250321
250602 250834 251126 250576 250573 250863 250575 250498 250955 250990
NO 250962 NO
F95B-5000 250355 250319 250748 250865 250669 250519 250862 250575 250541 250953 250991
Service kit includes: Impeller, gasket, seal and endcover screws. Cam reference is for full type (1/1).
190
Take good care of the cooling system – change to a new impeller every year!
The impeller is a very important security device. Its task is to pump the water through the
cooling system of the engine. But remember that the impeller should be replaced every year.
And always make sure you get a Johnson Pump Brand original impeller. Then you’ll know
that it matches your pump exactly.
Remove the impeller with a slip joint plier or an Impuller.
-Neoprene impellers: for engine cooling, and for fresh or salt water transfer duties. Neoprene
is the most commonly used material and is suitable for use where only small amounts of
oil or diesel fuel are present.
-Nitrile impellers: for bilge pumping, and for transfer duties where the water is heavily
contaminated, for example by oil or diesel.
It is possible to know the impeller’s material with a flame, neoprene burns, nitrile doesn’t.
Shaft Ø Blades
Ref. Pump type JOHNSON reference Material Ø mm Depth mm mm Shaft type nº JABSCO reference
Shaft Ø
SINGLE FLAT DRIVE SPLINE DRIVE
Ref.: 250300
191
Shaft Ø Blades
Ref. Pump type JOHNSON reference Material Ø mm Depth mm mm Shaft type nº JABSCO reference
250326 FIP40S 09-835S-7 Neoprene 95 63 25 Double flat 11
250327 Sherwood 9959K 09-701B-1 Neoprene 62 32 16 Key 12 18838-0001
250328 Sherwood 10615K 09-702B-1 Neoprene 65 41 16 Key 12 18948-0001
250329 Sherwood 09-703B-1 Neoprene 66 51 18,5 Single flat 8 17954-0001
250330 Sherwood 17000K 09-704BT-1 Neoprene 84 73 19 Key 12 18958-0001
250358 Sherwood 18000K 09-705BT-1 Neoprene 95 102 21 Spline 12
245701 Solé Neoprene 40 20 10 Pin 6
245702 Solé Neoprene 52 25 12 Pin 6
Pump spare parts
Ref. JABSCO Ref. Material Ø mm. Depth mm. Shaft Ø mm. Shaft type Blades nº JOHNSON reference
245517 12104-0001 neoprene 32 12 8 Pin 6
245518 1414-0001 neoprene 32 12 8 Single flat 6
245520 21414-0001 neoprene 32 12 8 Single flat 6
245519 14609-0001 neoprene 32 12 8 Single flat 6
245521 1414-0003 nitrile 32 12 8 Single flat 6
245525 24405-0001 neoprene 40 19 12 Slotted shaft 6 250303
245512 4528-0001 neoprene 40 19 9,5 Pin 6 250302
245524 4528-0003 nitrile 40 19 9,5 Pin 6
245523 17255-0003 nitrile 40 19 n. d. n. d. 6
245526 653-0001 neoprene 51 22 12 Slotted shaft 6
245527 4527-0001 neoprene 51 22 8 Pin 6
245529 22799-0001 neoprene 51 22 12,7 Key 6
245531 7273-0001 neoprene 51 22 8 Single flat 6
245530 6303-0001 neoprene 51 22 8 Single flat 6
245509 7273-0003 nitrile 51 22 8 Single flat 6
245506 6303-0003 nitrile 51 22 8 Single flat 6 250307
245533 5616-0001 neoprene 51 22 12,7 Ding keyway 6
245532 17486-0001 neoprene 51 22 12,7 Ding keyway 6
245510 673-0001 neoprene 51 22 12,7 Pin 6 250308
245528 673-0003 nitrile 51 22 12,7 Pin 6 250309
245511 4598-0001 neoprene 65 51 16 Key 8
245534 4598-0003 nitrile 65 51 16 Key 8
245535 11979-0001 neoprene 65 36,5 16 Spline 8
245503 920-0001 neoprene 65 51 16 Spline 8
245537 920-0003 nitrile 65 51 16 Spline 8
245538 17018-0001 neoprene 65 76,2 16 Spline 8
245539 31100-0061 neoprene 80 54 19 Spline 9
245540 31150-0051 neoprene 92 43 25 Spline 9
245504 836-0001 neoprene 95 63 25,4 Spline 9 250323
245541 836-0003 nitrile 95 63 25,4 Spline 9 250324
245543 6760-0001 neoprene 95 88,9 25,4 Spline 9 250320
245544 6760-0003 nitrile 95 88,9 25,4 Spline 9
245546 18786-0001 neoprene 118 88,9 25,4 Double flat 9
245547 17240-0001 neoprene 118 88,9 25,4 Spline 9
192
Depth SHAFT TYPES
SPLINE DRIVE
Ref. JABSCO Ref. Material Ø mm. Depth mm. Shaft Ø mm. Shaft type Blades nº JOHNSON reference
193
Panel mounting systems
Fastmount™ panel mounting systems have quickly become the world standard for removable interior and exterior panel mounting in the
marine industry. The system allows ceiling and wall panels to be removed and refitted in any sequence, time after time.
Combining speed, versatility and an outstanding aesthetic result, Fastmount enables designers, installers and contractors in the
Architectural, Aviation, RV and Marine sectors to re-think the panelling process. With Fastmount, the only limitation is your imagination.
VENTAJAS
194
STANDARD SYSTEM
New world standard for mounting removable panels. Originally designed for the demanding superyacht industry, the patented & EU
design registered system delivers a flawless finish with perfect alignment. Panels can easily be removed and refitted in any sequence,
time after time.
Combining speed, versatility and an outstanding aesthetic result, Fastmount enables designers, installers and contractors in the
Architectural, Aviation, RV and Marine sectors to re-think the panelling process. With Fastmount, the only limitation is your imagination.
195
LOW PROFILE SYSTEM
Ideal for applications that require less depth compared to the Standard Clip range, with lateral movement in female clip half.
Interchangeable within the range. Installs into various materials such as MDF, drywall and foam core panels. Ideal for removable wall
panels, acoustic panels, bedheads, thin walled panels and curved panels. Supplied with installation and removal tools.
Ref.: 120921
Perfect for mounting removable thin wall panels and facings, these clip sets require less depth compared to other Fastmount ranges. No
special installation tools are required. Designed and made in NZ the clip sets may be adhesive and/or screw fixed. Ideal for mounting
panels where no drilling is preferred. Typical applications include wall panels, bed heads and inspection panels.
196
METAL SYSTEM
These patent pending metal based clips are specifically designed for demanding
applications requiring fire protection and heavy load bearing.
Ref.: 120940
Ref.: 120971
TEXTILE SYSTEM
The Textile Range has been specifically designed for the mounting of soft textiles to hard surfaces. The hidden system locks into place,
and can only be removed by unlocking the clip, providing added security under high winds and seas. Makes cushions simple to install,
remove and replace. Typical applications include sun loungers, exterior and interior cushions, seat bases and backs.
Ref.: 120952
197
PANEL CONTROL RANGE
PanelSafe restraint systems provide added security and control. The panel is suspended below the ceiling for convenient servicing
behind the panel or controlled removal of the panel by releasing the wire. For use with Fastmount Standard Range clip system. Ideal for
inspection panels, large and/or heavy ceiling panels
Panel mounting systems
Ref.: 120945
SPARE KIT FOR STANDARD CT06-S 4 TOOLS KIT FOR LOW PROFILE LP08-Y
6 TOOLS KIT FOR STANDARD CT08
Includes: 24x PC-M1A, 4x PC-M2H, 4x Includes: CT05-, CT09-, CT10- y 20x
Includes: CT01-, CT03-, CT05-, CT07-,
PC-SM4 ,2x PC-SM2H, CT05- y CT10- CT20-
CT09- y CT10-
198
INSTALLATION TOOLS
For quality installation and performance, the Standard Clip Range and Low Profile Clip Range are supplied with installation and removal
tools.
10MM DRILL WITH STOPPER 16,8MM DRILL FOR STANDARD FEMALE CT07
CT01
FORSTNER DRILL FOR STANDARD MALE CT09 16,8MM FIBER DRILL FOR STANDARD FEMALE
CT13-A
199
TEF-GEL
Always use your screws and bolts with Tikal Tef-Gel, and everything can be easily taken apart again even after intensive use
in seawater. The same applies to the protection of turnbuckles against rusting. Tikal Tef-Gel® is used in the boat industry,
automotive industry, in aviation and aerospace and wherever parts have to be protected from corrosion.
Anti-corrosion / Lubricant
Use:
10g tube - Stops corrosion from galvanic flows between unequal
Ref.: 020301 metals.
- Keeps bolted connections permanently passable.
- Permanent saltwater-proof and UV-resistant lubricant.
- Very environment-friendly.
Features:
- No smell.
- Storable over 10 years.
- Universally applicable.
- Simple to manage.
- White colour.
60g can
Ref.: 020302
500g pot
Ref.: 020303
200
Centre Centre
Ref.: 127106 Ref.: 127107
Reversed Reversed
Ref.: 127014 Ref.: 127012
Standard Standard
Ref.: 127013 Ref.: 127011
Hinges
Electro polished Electro polished
304 stainless steel. 304 stainless steel.
201
Centre Centre
Ref.: 127109 Ref.: 127108
Standard Standard
Ref.: 127004 Ref.: 127003
Centre
MATERIAL:
Ref.: 127110
Stainless steel ASTM 304 (SIS
2333)
Reversed
Ref.: 127084
TREATMENT:
Double factor electrolytic polishing.
Standard
Ref.: 127006
SHAFT:
The ROCA hinges shaft is a
calibrated tube finished in the
ends with two special borders for
a safe and resistant joint.
Technical advantages:
Clean surface and smooth Ref.: 127002
microprofile.
Increased resistance to electrolytic
and spot corrosion.
Less risk for coating and
adherence.
Better mechanical properties,
e.g. for deburring of drilled and
punched details.
Less friction.
Electro polished
304 stainless steel.
202
Reversed Reversed
Ref.: 127083 Ref.: 127082
Standard Standard
Ref.: 127007 Ref.: 127008
Electro
polished 304
Electro polished stainless steel. Ref.: 127015
Electro polished
304 stainless steel. 304 stainless steel.
Hinges
H
10mm Ref.: 127031
12mm Ref.: 127032
Ref.: 127022 15mm Ref.: 127033
Electro polished Electro polished Electro polished
304 stainless steel. 304 stainless steel. Ref.: 127039 304 stainless steel. 20mm Ref.: 127034
LIFT-OFF HINGES
Electro polished
304 stainless steel.
Left
Ref.: 127046 Electro polished
304 stainless steel.
H
10mm Ref.: 127035
12mm Ref.: 127036
15mm Ref.: 127037
20mm Ref.: 127038
203
HEAVY DUTY HEAVY DUTY
Ref.: 127017 304 stainless steel. Ref.: 127018 304 stainless steel.
Electro polished
304 stainless steel.
204
HEAVY DUTY HEAVY DUTY
Electro polished
304 stainless steel.
Hinges
H = 24mm Ref.: 127047 H = 34mm Ref.: 127048
Electro polished
304 stainless steel.
HEAVY DUTY
Ref.: 127019
Electro polished
304 stainless steel.
Electro polished
304 stainless steel. HEAVY DUTY
Ref.: 127081
205
REVERSED HINGES
W = 85mm W = 110mm
Electro polished
316 stainless steel.
W = 85mm W = 110mm
Hinges
60
Ø8
Ø12x90º
TABLE HINGES
Ref.: 127086
Ref.: 127193 Ref.: 127009
316 stainless steel 180º opening angle.
Chrome brass Chrome brass
206
Ref.: 127201
Ref.: 127195
Ref.: 127198
Hinges
Ref.: 127197
Ref.: 127200
Ref.: 127196
Ref.: 127199
207
304 STAINLESS STEEL
Standard
Ref.: 127220
Reversed
Ref.: 127221
Hinges
Ref.: 127222
Standard
Ref.: 127230
Reversed
Ref.: 127231
Standard
Ref.: 127234
Standard
Ref.: 127239
Reversed
Ref.: 127240
208
Centre Standard
Ref.: 127235 Ref.: 127236
Hinges
Reversed Centre
Ref.: 127237 Ref.: 127241
Standard Standard
Ref.: 127232 Ref.: 127233
Centre
Ref.: 127226 Ref.: 127225
209
Standard Standard
Ref.: 127229 Ref.: 127228
Hinges
Standard Standard
Ref.: 127238 Ref.: 127227
Standard
Ref.: 127223
Reversed
Ref.: 127224 Ref.: 127242
210
Ref.: 127244 Ref.: 127243
Hinges
Hinge’s drawings are not in
natural size. You should pay
attention to the values.
Ref.: 127245
Standard Standard
Ref.: 127328 Ref.: 127326
Standard
Ref.: 127327
211
STUD CENTRE HINGES
60 60 30 60
Ref.: 127065 Ref.: 127066 13
12 12
3 3 58
58
Centre
M8 Stud
STUD HINGES
Hinges
316 stainless steel - Thickness: 4mm. - shaft Ø 4mm - M6x50mm stud welded
Opening angle
Reversed
Ref.: 127215
60 40
120 75
30 25
M10 Stud 14
Ref.: 127178 4
6 28
Ref.: 127179
Ref.: 127180
212
SURFACE MOUNT HINGES
316 stainless steel.
B
A B C mm.
A
33 28 6 Ref.: 127139
C 54 30 10 Ref.: 127175
COVERED HINGES
These unique and beautifully finished 316 Stainless Steel hinges offer the
installation ease of a traditional top mounted hinge, with elegance of a stud
mounted hinge at an affordable price.
Hinges
The covers use the same 3M VHB tape used to attach trim in the auto industry.
The covers are easily removed with the use of a heat gun or hair dryer should
hinge maintenance be required.
316 stainless steel. Base hinge thickness: 2mm
Standard
18 26
Ref.: 127212
36
42
19 38
57
38 38 Ref.: 127184
4
25
36
21
37
76
23
36
36
65
39 38
60 50
74 Ref.: 127192 65 Ref.: 127191
213
HATCH HINGE
316 stainless steel
76º opening angle.
80º opening angle.
2 screws M5 thread
3 screws 5mm 4 screws M5 thread
SPRING HINGES
Stainless steel
50x50mm
Ref.: 127262
110x75mm
To keep the Left Right
102x90mm Ref.: 127101 doors closed. Ref.: 127059 Ref.: 127058
SPRING HINGES
Stainless steel
214
Stainless steel.
Thick: 2mm
60x50mm Stainless steel.
Thick: 2mm
Ref.: 127056 100x90mm
60x40mm Ref.: 127050
Ref.: 127057
100x80mm
Thick: 1,5mm Ref.: 127051
60x50mm
Ref.: 127090
60x40mm 100x70mm
Ref.: 127091 Ref.: 127052
100x60mm
Hinges
Ref.: 127053
Stainless steel.
Stainless steel. Thick: 2mm
Thick: 1,2mm 80x70mm
75x50mm Ref.: 127054
Ref.: 127074 80x60mm
Ref.: 127055
80x50mm
Ref.: 127062
Thick: 1,5mm
80x70mm
Ref.: 127087
80x60mm
Ref.: 127088
Removable shaft
hinge.
Stainless steel.
Thick: 2mm 50x100mm Ref.: 127260 Stainless steel.
Thick: 2mm
100x100mm
Ref.: 127102
215
62
76 89
Hinges
31
60
18
35 40
Stainless Stainless Stainless Stainless
Ref.: 127161 Ref.: 127131 Ref.: 127132 Ref.: 127133
steel. steel. steel. steel.
...always
maintaining
the same
quality
Stainless Stainless Stainless
Ref.: 127026 Ref.: 127025 Ref.: 127024
steel. steel. steel.
216
Left type Right type
Stainless Stainless
steel. steel.
Right Right
Ref.: 127171 Ref.: 127173
Left Left
Ref.: 127060 - Right 110x75mm Ref.: 127172 Ref.: 127174
55 55
Ref.: 127061 - Left Stainless steel.
LIFT-OFF LIFT-OFF
Hinges
Stain. steel.
Non-mortice.
LIFT-OFF
Stainless Stainless
steel. steel.
Left Right
Ref.: 127167 Ref.: 127169
Right
Ref.: 127063 Right Left
Left Ref.: 127168 Ref.: 127170
Ref.: 127064 55 55
Left
Right Right
Ref.: 127154
Ref.: 127158 Ref.: 127156
LIFT-OFF LIFT-OFF
217
47,5
Hinges
0,90
0,80
45
Stainless steel. Ref.: 127071 Stainless steel. Ref.: 127072 Stainless steel. Ref.: 127073
218
Other
stainless steel
hinges:
48x34x0,8mm
Ref.: 127186
50x39x1,2mm
Ref.: 127188
60x44x1,5mm
Ref.: 127189
SS Ref.: 127119 SS Ref.: 127120 SS Ref.: 127121 SS Ref.: 127122
Hinges
Brass Ref.: 127301 Brass Ref.: 127302 Brass Ref.: 127303 Brass Ref.: 127304
0,80
Other
stainless steel
hinges:
48x34x0,8mm
Ref.: 127185
30x22x0,8mm
Ref.: 127187 SS Ref.: 127128 SS Ref.: 127127 SS Ref.: 127126 SS Ref.: 127125
Brass Ref.: 127310 Brass Ref.: 127309 Brass Ref.: 127308 Brass Ref.: 127307
219
ADJUSTABLE TORQUE POSITION CONTROL HINGES
Keeps the door total or partially opened or closed. Bolt for friction adjustment.
30,5 25,5 36
18
25,5 5 43 13
10 torque
13 adjusting
screw
220
180º opening angle.
Concealed hinges
41 x 45 mm.
52 x 45 mm. Chrome brass
Ref.: 127113
Chrome brass
Brass Stainless steel.
88 x 45 mm. Ref.: 127115
Ref.: 127114 Ref.: 127203
Brass
Ref.: 127116
Chrome brass
Ref.: 127117
180º
Brass opening angle.
Ref.: 127118
Ref.: 127165 40
Ref.: 127166 65
Ø A B C
Ref.: 127146 12 32 27
Ref.: 127147 14 37 31
Brass. Brass.
180º opening angle. Ref.: 127148 16 40 33 180º opening angle.
Zinc alloy.
Stainless steel arms.
mm A B C D E F
Ref.: 127249 43 29 11 22 13 5
Ref.: 127250 45 35,7 13 19 18,5 6
Ref.: 127251 60 35,7 13 33 18,5 6,5
Ref.: 127252 70 42,5 16 35 23 9
180º opening angle.
Ref.: 127253 100 53,2 20 52 27,5 9,5
221
GLASS DOOR HINGES
HALF OVERLAY
WITH CATCH
INSET HALF OVERLAY
Ref.: 127204 Ref.: 127205 BLACK
Ref.: 127206
10 1,2
2 30
1,2 38,5 18 20 34 38 18 34
Stainless steel with exterior aluminium head.
1,2 27,8 1,2
Hinge will hold door in closed position
12
ø5 6,5
11,2 ø5
39
without secondary support.
22 9 23
ø21 ø21 34
32 21
CONCEALED HINGES
7,5
Hinges
17,5
49 25
12
11
15-20
25
100º
Ref.: 127176 Polished 304 stainless steel. 32 44
100º opening.
Overlay: 5-9mm.
Cup: Ø35mm - Bore depth: 11mm. 27,5
41,5
17,5
49 25
12
15-20 11
Different pressure
depending on the
installation place: For mounting at the centre of
the cabinet panel. Ref.: 121195
53
32 32 50
19
28 10
222
PIANO HINGES
L
Width Thickness L
(mm) (mm) (mm)
Width Thickness L
Ref.: 127049 20 0,8 1000
(mm) (mm) (mm)
Ref.: 127027 20 0,8 2000
Hinges
Ref.: 127142 40 1,5 2000
Ref.: 127100 25 0,8 1000
Ref.: 127143 50 1,5 2000
Ref.: 127028 25 0,8 2000
Ref.: 127144 60 2 2000
Ref.: 127268 32 0,8 1000
Ref.: 127145 80 2 2000
Ref.: 127029 32 0,8 2000
Ref.: 127030 40 0,8 2000
Stainless steel.
Ref.: 127163
Ref.: 127162
223
DRAWER SLIDES
ESR-1
Extension: 3/4. A B A B
Front disconnect.
Friction break stop. Ref.: 122501 305 229 Ref.: 122505 508 381
Non-handed. Ref.: 122502 355 279 Ref.: 122506 559 406
1 unit per reference. Ref.: 122503 406 305 Ref.: 122507 610 432
35
Ref.: 122504 457 330 Ref.: 122508 660 483
Drawer slides
B A
35
RKA-5
Extension: 3/4.
Easy disconnect.
Urethane roller provides the
A B A B
smooth and silent movement.
Ref.: 122520 296 205 Ref.: 122524 496 380
2 units per reference.
Ref.: 122521 346 250 Ref.: 122525 546 420
Stainless steel.
224
DRAWER SLIDES
ESR-4513
Extension: full. mm A B A B
Front disconnect.
Non-handed. Ref.: 122560 250 243 Ref.: 122565 500 508
Ref.: 122561 300 305 Ref.: 122566 550 559
2 units per reference.
Ref.: 122562 350 355 Ref.: 122567 600 610
Ref.: 122563 400 406 Ref.: 122568 650 660
Ref.: 122564 450 457 Ref.: 122569 700 711
Slides
304 stainless steel.
ESR-3813
mm A B A B
Extension: full.
Front disconnect. Ref.: 122570 200 200 Ref.: 122575 450 457
Non-handed.
Ref.: 122571 250 243 Ref.: 122576 500 508
2 units per reference.
Ref.: 122572 300 305 Ref.: 122577 550 559
Ref.: 122573 350 355 Ref.: 122578 600 610
Ref.: 122574 400 406
304 stainless steel.
SWIVELING SLIDES
Multiple appliances.
Aluminium plates.
Steel balls.
Rubber legs.
225
FLEXIBLE T-HANDLE LATCHES
Flexible one piece moulded latch.
UV resistant.
Absorbs and reduces vibration.
Front version
31
21 20,3
Front version Ref.: 121024
Unlatched
30,5
7,9 White Ref.: 121025
28,4
B C
A B C D A
Ref.: 121026
SCREW-ON HASP
Ref.: 121305
226
HASPS FLEXIBLE T-HANDLE CAM OVER LATCHES
LATCH
Ref.: 121021
Ref.: 121301
316 stainless
steel. 105
Ref.: 121034
13
Ref.: 121302 Ref.: 121035 With key 85
Latches
SS and UVRP rubber. Spare key Ref.: 160790
Ref.: 121303
Ref.: 121022
Length closed: 105mm.
Concealed keeper. Low profile
design. Non-corrosive materials.
Cushions impact and accommodates
316 stainless misalignment.
steel.
Ref.: 121304 Ref.: 121033
Electro polished stainless steel.
Adjustable length.
Optional catchplate for vertical mount.
A B C D E
Base Ref.: 121014 Ref.: 121011 66-75 26 17 21 21
25x25mm
Ref.: 121012 115-125 40 22 30 29
227
LIFT HANDLES
Electro polished stainless steel. With retrogressive spring.
50
60
Ø 50
Ref.: 124101
Ref.: 124103
Chrome brass.
Overall dimensions:
58x37mm.
Ref.: 121419 Ø97mm
HATCH PULLS
Stainless steel.
Ref.: 121406
228
“M1” COMPRESSION LATCHES
The sleek flush-mount design of these latches gives designers a more stylish alternative for Ø76
delivering the functionality of compressive action that provides a watertight seal and dampens
vibration to reduce noise and rattle. Simply lift the handle to release compression; and turn to
have the pawl clear the frame. Durable corrosion-resistant materials withstand use in outdoor
environments IP65. Available in two sizes and multiple finishes to suit a variety of panels.
Supplied with gaskets and “O” rings for complete sealing where a watertight fit is desired.
Concealed fasteners provide a clean exterior appearance.
B
Ø61,5
A
manilla E
levantada
3,5
316 stainless steel. Bright polished.
12-22,5
C
D
Latches
Door thickness 12-22,5mm Door thickness 2-12mm
A B C D E Without lock With lock Without lock
Spare key
61,5 70 30 61,5 4 Ref.: 124121 Ref.: 124122
Ref.: 124139
76 89 37 71 5 Ref.: 124123 Ref.: 124124 Ref.: 124134
LATCH LATCH
316 SS 316 SS
Spare key
Ref.: 160790
Llave repuesto
Ref.: 160790
LATCH LATCH 70
A watertight touch pull latch with a new latching
concept for hatches and doors. Stainless steel
316. Low profile. Electro polished. With retrogressive
spring and stop. 316 SS.
Ref.: 124147
WITH LOCK Ref.: 124148
78
63,5
4-15
87 45-76
Ref.: 124104
27-43
229
LATCH ROUND “T” LATCHES
316 stainless steel.
Lock
316 stainless steel. Interior opening
D
90 x 75 Ref.: 124110 Straight cam cam
Ref.: 124105
75 x 64 Ref.: 124111 Ref.: 124117 Ref.: 124115
Chrome brass
Ref.: 124108
92 mm
316 stainless
steel.
80 mm 105
16 mm 316 stainless Ref.: 124129
steel. 9
83 mm
Ref.: 124113 82
80
7 mm
105 mm
85
230
COMPRESSION LATCH
Ref.: 124142
Latches
COMPRESSION LATCHES WITH HANDLE SWIM DOOR LATCH
ø29
36
69 Ref.: 124120
Lock thickness: 18-81mm Spare key
Hexagonal 8mm key opening. Ref.: 160790
Half-turn motion: the shaft and cam compress to
pull the door snugly against the frame or gasket With key Ref.: 121211
into the locked position up to 6,4mm.
60
BLACK COMPRESSION LATCH
Max. panel thickness: 19mm
41
33
50
Ref.: 121210
316 stainless steel. Designed for waterproof compartments.
Ref.: 124143 Perfect for exterior deck lockers and live bait well.
231
“ANCHOR” FLUSH LATCH FLUSH LATCHES
Polycarbonate, stainless
316 stainless steel. steel shaft.
Cut hole Ø50mm.
Panel thickness
Black White min. max.
Ref.: 121201 Ref.: 121205 2 7
* 7 12
Ref.: 121212 Ref.: 121202 Ref.: 121206
Ref.: 121203 Ref.: 121207 12 17
*With lock
Ref.: 121204 Ref.: 121200 17 22
Latches
Ref.: 121208
Ref.: 121232
PADDLE LATCHES
232
“BEETLE” LATCHES
Strong, stylish, and easy to operate, these low-profile push-to-close latches offer a practical solution for convenient, carefree
operation on vertical or horizontal doors, panels, and hatch covers. Built-in spring-loaded pull serves as latch actuator and door
handle through one continuous motion, then keeps panel quiet once it is slammed shut. Round-hole installation. Inside actuation
when locked or unlocked. Plastic materials, with 316 stainless steel metal parts. Adjustable grip up to 6mm.
WITHOUT LOCK
75 Handle
in open
36 position
65
Latches
23±3
40
25,5
WITH LOCK
86 Handle
in open
36 position
67
25,5 23±3
40
14
Keeper
1,6
“NOVIBRA” LATCHES
Choose push-to-close, twist-to-open convenience in an elegant design that actually enhances performance. An anti-vibration
feature keeps enclosures quiet, despite normal vibrations. This highly designed latch is offered in two different mechanisms, and
multiple finishes, for door and for drawer applications. From 3 to 22mm panel thickness. Fast, easy installation. Weatherproof
face. Long bolt travel with an adjustable striker plate.
Type 1 Type 2
(For drawers) (For doors)
Additional colours
and custom
Type 1 Type 2 Type 1 Type 2
colour-matching
chrome/black chrome/black chrome/chrome chrome/chrome
available on
request. Ref.: 121820 Ref.: 121826 Ref.: 121828 Ref.: 121827
233
HANDLE/KNOB LOCKS WITH PADLOCK HOLE
MAGNETIC LATCHES
Stainless steel eyelet.
Magnetic mechanism.
It operates by pulling inside the eyelet.
30
53
Spare eyelet
Ref.: 121178
70
Right Left
25
Ref.: 121192 Ref.: 121193
“SUNDECKER” LATCH
With striker and strap protector.
Can be installed almost
anywhere on the deckside; it 115
53
can even be incorporated into
upholstery. 19
Chrome brass.
Stud M8x44mm Base:
Chrome brass.
40x18 mm
Ref.: 121410 Ref.: 122001 Ref.: 121409
234
CAM LOCK CAM LOCK
For small places.
Chrome brass. 90º.
Chrome zinc alloy.
With 2 keys. 50 different
combinations.
With 2 keys.
CAM LOCK
Latches
Ref.: 124112 75x25mm
23
32
70
Chrome Ref.: 121225
Gold Ref.: 121226
50 29
235
“M1” POP-OUT KNOB LATCHES
Ref.: 121220
Latches
{
Ref.: 121152 Brown
RIM LOCK CASES Ref.: 121153 Nickel-plated
Ref.: 121154 White
ROSETTES KNOBS
Panel thickness
Finishes 13mm 16mm 19mm
Matt nickel-plated Ref.: 121155 Ref.: 121160 Ref.: 121165 Ref.: 121170
Polished gold Ref.: 121156 Ref.: 121161 Ref.: 121166 Ref.: 121171
Old gold Ref.: 121157 Ref.: 121162
White Ref.: 121158 Ref.: 121163 Ref.: 121168 Ref.: 121173
ROSETTES AND KNOBS Brown Ref.: 121159 Ref.: 121164 Ref.: 121169 Ref.: 121174
Polished brass and chrome finishes.
236
PUSH LATCHES
Frame 49
Door
25
thick 15
2 LATCH BODY
34 PUSH KNOB
Cut hole White
Ø28mm Gold Chrome Black nickel
Ref.: 121244
Ref.: 121240 Ref.: 121241 Ref.: 121242
PUSH LATCH
Latches
ABS plastic. White.
Door thickness: 15-30mm.
cut hole
Ø28mm Ref.: 121246
38 34
38
Oval Oval
33 Perpendicular in line Square Round
PUSH LATCHES
237
“GRABBER” PUSH-TO-CLOSE LATCHES
Grabber catch with integral Microswitch.
Opens and closes switch contacts with door operation.
One assembly includes catch and keeper.
Spring loaded over-center latching
Opening force: 22N.
13,7
28,2
72
48,5 48,5
Latches
13,7
31 32
Brown White
Ref.: 121130 Ref.: 121119 Ref.: 121120
16,5
Chrome brass
Dimensions Brass with SS balls
316 stainless steel.
44x8 Ref.: 121111
A B C
49x9 Ref.: 121112 50 9 11
Ref.: 121117
60x11 Ref.: 121113 Ref.: 121116 Ref.: 121118 63 9 15
238
“SNAPPY” PANEL LATCHES
Simple and efficient.
24 All non-corrosive material.
Over-centre latching for vibration resistance.
38
Self adjusting pawl misalignment.
37 Brown White
Ref.: 121227 Ref.: 121228
B
Chrome brass.
Latches
A 316 stainless steel.
Length 100mm Length 130mm
A B C D mm 50mm 100mm
Ref.: 121066 Ref.: 121067
Ref.: 121048 Ref.: 121049
Length 160mm 50 32 69 22
Ref.: 121047 100 32 119 22 2nd eyelet Ref.: 121040
MORTICE LEVER LOCK RIM LEVER LOCK LEVER WITH SQUARE FOR KEY
With rounded faceplate
and with striking plate.
Base: 80x25mm Rose: Ø30mm
Backset: 30mm
Square: 7mm Spindle: 60mm
Square: 7mm
Lever: 60x18mm
Square: 7mm
250x25mm 200x25mm
Ref.: 121060 Ref.: 121063
300x25mm 250x25mm
Ref.: 121061 Ref.: 121064
Ref.: 121074
Ref.: 121078
239
FLUSH SLIDE LATCH
Ref.: 121055
15 90
Latches
Ref.: 121075
Ref.: 121076 Ref.: 121077
Stainless steel. D F
G
B
B A C
A B C D E F G
Ref.: 121069 40 11 20 24 10 Ø6 26,5
Ref.: 121072
Stainless steel.
Satin finish.
Ref.: 121073
240
BARREL BOLTS SLIDE BAR LATCH
Chrome brass
96 122
51
Surface
Ref.: 121043 Flush
Striker STRICKERS
Ref.: 121044 A B C
Surface Ref.: 121085
Ref.: 121083 123 32 30
Flush Ref.: 121084
Ref.: 121056
A B C D
Ref.: 121050 38 89 16 37
Ref.: 121051 38 110 16 37
Ref.: 121057
BIG BARREL BOLTS
Chrome brass
Ref.: 121058
241
BUTTON RELEASE TRANSOM DOOR LATCH
Transom door latch manufactured in stainless steel 304. Works on both right
L and left hand transom doors.
Door can be opened and locked by pushing the button and rotating the
handle. Every 90º turn can secure the handle in position.
Two strike options: surface mounting.
Strickers
Surface Flush
Small (L: 166mm) Ref.: 121079
Ref.: 121081 Ref.: 121082
Large (L: 213mm) Ref.: 121080
FURNITURE LOCKS
H
Ref.: 121414 20mm
Ref.: 121415 25mm
Ref.: 121416 30mm
Ref.: 121417 35mm
MULTIPOINT LOCKS
Overall dimensions: 185x54mm.
Stainless steel and brass nickel-plated.
Supplied with 2 rods: 15x3x1000mm and 4 rod holders.
With 3 locking points.
Cylinder with 2 keys.
242
“TALON” SLIDING DOOR LOCKS
Thickness (mm)
22,5 - 27 26,5 - 34,5
Locks
ANODISED
ALUMINIUM Ref.: 121881 Ref.: 121882
BLACK
ALUMINIUM Ref.: 121885 Ref.: 121886
CHROME
BRASS Ref.: 121889 Ref.: 121890
168,5
59 62 41
20
Optional top stop
243
“FLUSH” SLIDING DOOR LOCKS
Door thickness: 12,5mm WHITE ALUM. (144x73mm) Ref.: 121892 Black spacer
With optional spacer: 10mm ALUMINIUM (144x73mm) Ref.: 121894 Ref.: 121808
Marine grade materials resist corrosion
Allows for 100 - 150mm (4”- 6”) more door travel than
traditional sliding-door lock styles. Safety lock prevents
the door from being locked from the inside. To activate: 73
turn key clockwise and remove. Shipped with striker and
two keys. 134
STANDARD OVAL
OVAL OVAL 12,7
WEATHERPROOF Ref.: 121809 Ref.: 121818
STANDARD OVAL
WEATHERPROOF WEATHERPROOF
Ref.: 121817 Ref.: 121819
STANDARD SPLASHPROOF
WITH PLUG
148
12,7
Ref.: 121799
Black
Ref.: 121800 White
Ref.: 121801
Optional eyelet
striker Spacer 2mm
Black striker Ref.: 121952
Ref.: 121802 Ref.: 121805
SPARE KEYS
Suitable for FLUSH, Stainless steel FLUSH and SECURE. Ref.: 121998 800 series Ref.: 121999 900 series
Chrome brass.
With 2 trip bolts, knurled knob, security
cylinder with 2 keys and striker.
Left Right
L=20 Ref.: 121431 L=20 Ref.: 121413
L=25 Ref.: 121420
244
“STAR SAILOR” DOOR LOCK
316 stainless steel.
Door thickness: 12mm.
With optional spacer: 10mm.
Ref.: 121798
Locks
304 stainless steel.
Non-handed.
With indicator.
Door thickness:
28-40mm
Opposite side
Ref.: 121395
Opposite side
304 stainless steel.
Non-handed. With indicator.
Door thickness: 28-40mm Ref.: 121396
2
7,5
12,5 30,5 Ref.: 121400
18,2 43 35
245
MAGNETIC DOOR LOCKS
Faceplate: 92x16x2mm.
75
70 92
62
Right-A Ref.: 121833 Ref.: 121846 Ref.: 121837 Ref.: 121841 Ref.: 121844
Right-B Ref.: 121830 Ref.: 121842 Ref.: 121829 Ref.: 121834 Ref.: 121838
Left-A Ref.: 121831 Ref.: 121847 Ref.: 121835 Ref.: 121839
Left-B Ref.: 121832 Ref.: 121843 Ref.: 121836 Ref.: 121840 Ref.: 121845
B B
A A
Left Right
14,5-17mm
246
ULTRASLIM DOOR LOCK
110 50 60
118
13 36
9,5
Locks
40
76
Faceplate: 13mm.
Anti-vibration slide.
With privacy lock.
Non-handed.
Ref.: 121515
247
STRIKERS FOR “McCOY”, “COMPACT” AND “OFFSHORE” DOOR LOCKS
Ref.: 121981 5 11
Ref.: 121982 7 13
Ref.: 121983 9 16 36 68
Ref.: 121984 13 19
Strikers
Ref.: 121985 16 22
A
Ref.: 121986 21 27 16 Frame
Door
X
See these locks on To find the right striker for your
pages 222-225 application, measure the (X) distance
from the door face to the edge of the
springbolt of the latch.
Offshore Compact McCoy
248
“McCOY” LOCKS
Locks
A-B - privacy lock button position
“NOVA” HANDLE Ref.: 121867
B B
“PORTOFINO” HANDLE Ref.: 121865
A A
Left Right
“NOVA” HANDLE WITH PRIVACY LOCK
Door thickness 22-30mm Door thickness 28-37mm
Chrome Chrome/Dia.brass Diamond brass Chrome Chrome/Dia.brass Diamond brass
Right-A Ref.: XX9249 Ref.: XX9365 Ref.: XX9149 Ref.: XX9253 Ref.: XX9369 Ref.: XX9153
Right-B Ref.: XX9246 Ref.: XX9362 Ref.: XX9146 Ref.: XX9250 Ref.: XX9366 Ref.: XX9150
Left-A Ref.: XX9248 Ref.: XX9364 Ref.: XX9148 Ref.: XX9252 Ref.: XX9368 Ref.: XX9152
Left-B Ref.: XX9247 Ref.: XX9363 Ref.: XX9147 Ref.: XX9251 Ref.: XX9367 Ref.: XX9151
Right-A Ref.: XX9257 Ref.: XX9373 Ref.: XX9157 Ref.: XX9261 Ref.: XX9377 Ref.: XX9161
Right-B Ref.: XX9254 Ref.: XX9370 Ref.: XX9154 Ref.: XX9258 Ref.: XX9374 Ref.: XX9158
Left-A Ref.: XX9256 Ref.: XX9372 Ref.: XX9156 Ref.: XX9260 Ref.: XX9376 Ref.: XX9160
Left-B Ref.: XX9255 Ref.: XX9371 Ref.: XX9155 Ref.: XX9259 Ref.: XX9375 Ref.: XX9159
Right Ref.: XX9108 Ref.: XX9262 Ref.: XX9162 Ref.: XX9110 Ref.: XX9266 Ref.: XX9166
Left Ref.: XX9109 Ref.: XX9263 Ref.: XX9163 Ref.: XX9111 Ref.: XX9267 Ref.: XX9167
Right Ref.: XX9112 Ref.: XX9270 Ref.: XX9170 Ref.: XX9114 Ref.: XX9274 Ref.: XX9174
Left Ref.: XX9113 Ref.: XX9271 Ref.: XX9171 Ref.: XX9115 Ref.: XX9275 Ref.: XX9175
249
MORTICE DOOR LOCKS RIM DOOR LOCKS
Chrome brass.
Locks
With striker.
Handle’s square: 8mm.
Ref.: 121501
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121401
Chrome brass.
With striker.
Handle’s square: 9mm.
9
Right
Ref.: 121544
Left
Ref.: 121545
250
RIM DOOR LOCKS
WITH CYLINDER HOLE
Chrome brass.
With striker.
With 3 trip bolts.
Right
Ref.: 121546
Left
Ref.: 121547
Locks
Chrome brass.
With striker.
Handle’s square: 8mm.
Right
Ref.: 121502
Left
Ref.: 121503
Chrome brass.
With striker.
Handle’s square: 8mm.
Right
Ref.: 121506
Left
Ref.: 121507
Chrome brass.
With striker.
Handle’s square: 9mm.
Right
Ref.: 121541
Left
Ref.: 121542
251
MORTICE DOOR LOCK
Faceplate: 80x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121559
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121557
Faceplate: 144x22x2mm.
Chrome brass.
With striker.
Handle’s square: 9mm.
Ref.: 121543
252
MORTICE DOOR LOCKS
WITH ANTI-RATTLE LATCH BOLT
AND LOCKSET
Chrome brass - Stainless steel.
With striker.
Handle’s square: 9mm.
Locking’s square: 7mm.
See plate on Faceplate: 144x18x2mm.
page 235.
Left Ref.: 121569 Ref.: 121568 Right
Faceplate: 144x22x2mm.
Left Ref.: 121570 Ref.: 121560 Right
Locks
Faceplate: 133x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121504
Faceplate: 133x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
Locking’s square: 7mm.
Ref.: 121508
Faceplate: 151x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121558
253
MORTICE DOOR LOCK
WITH CYLINDER HOLE
Ref.: 121540
Specify hand.
Faceplate: 212x22x2mm.
Handle’s square: 9mm.
Locking’s square: 7mm.
Ref.: 121548
Specify hand.
Ref.: 121549
Specify hand.
Ref.: 121550
Specify hand.
Ref.: 121551
Specify hand.
254
MORTICE DOOR LOCK
WITH CYLINDER HOLE
Faceplate: 212x22x2mm.
Stainless steel and chrome brass.
With striker and anti-rattle latch bolt.
Handle’s square: 9mm.
Ref.: 121561
Specify hand.
Faceplate: 212x22x2mm.
Stainless steel and chrome brass.
Locks
With striker and anti-rattle latch bolt.
Handle’s square: 9mm.
Locking’s square: 9mm.
Ref.: 121562
Specify hand.
Faceplate: 212x22x2mm.
Stainless steel and chrome brass.
With striker and anti-rattle latch bolt.
Handle’s square: 9mm.
Ref.: 121552
Specify hand.
255
RIM SLIDING DOOR LOCKS
WITH 2 KEYS
Chrome brass.
With striker.
Handle’s square: 8mm.
Left Right
Ref.: 121532 Ref.: 121531
Locks
Faceplate: 140x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
With 2 keys
Ref.: 121533
Faceplate: 140x15x2mm.
Chrome brass.
With striker.
Handle’s square: 8mm.
Ref.: 121534
256
MORTICE SLIDING DOOR LOCKS
WITH CYLINDER HOLE
Faceplate: 250x25x3mm.
Stainless steel - Chrome brass.
With striker.
Handle’s square: 8mm.
Depth: 43mm.
Ref.: 121537
Depth: 61mm.
Ref.: 121538
Locks
Ref.: 121538 Ref.: 121537
Faceplate: 225x22x4mm.
Stainless steel - Chrome brass.
With striker.
Handle’s square: 9mm.
Ref.: 121539
Faceplate: 112x15x2mm.
Ref.: 121535
257
DOUBLE DOOR LOCKS A-60 / A-0
Stainless steel.
Faceplate: 305x25x3mm.
3 point lock for double doors.
A-60 / A-0
Locks
Left Right
Ref.: 121565 Ref.: 121564
Faceplate: 160x25x3mm.
Bottom lock for double doors.
A-60 / A-0
Left Right
Ref.: 121567 Ref.: 121566
258
HANDLES Q=8
Chrome brass.
Locks
H=40mm Ref.: 121658 8–>7
Ref.: 121603 Ref.: 121606 Ref.: 121607 Ref.: 121659 9–>8
HANDLES Q=9
Chrome brass.
L=120mm H=50mm
L=110mm L=100mm
Chrome brass Ref.: 121631 L=113mm H=75mm
H=60mm H=53mm
Stainless steel Ref.: 121647 Ref.: 121630 Ref.: 121632 Ref.: 121629
Ø45mm Ø45mm
Ref.: 121611 Ref.: 121615
Ø32mm Ø32mm 53x28mm
Ref.: 121640 Ref.: 121614 Ref.: 121639 Ref.: 121623 Ref.: 121616 Ref.: 121617 Ref.: 121610
259
ROSES FOR HANDLES Q=9
Stainless steel
150x25mm 230x30mm 196x38mm
Lockset.
With locking knob.
Ref.: 121633
Ref.: 121643 Ref.: 121644 Ref.: 121645 Ref.: 121634 Ref.: 121624
Corrosion resistant.
L=45mm L=56mm L=70mm
Ref.: 121660 Ref.: 121661 Ref.: 121662 MAR-40
Ref.: 121424
MAR-30
260
MARINE PADLOCKS 3 MARINE PADLOCK SET MARINE
PADLOCKS - LARGE SHACKLE
Ref.: 122025
Ref.: 122550
GUIDE BLOCK
Polyethylene.
Ref.: 122551
261
Type 6-15. End-fittings not included (except on Ref.:123144), M5 rod ends.
A
316 stainless steel A B C D Force Model
B
Ref.: 123144 6 15 56 160 60N GSE6188 Stroke (C)
Ref.: 123065 6 15 60 160 100N GSE1516 Extended length (D)
Dia 8
262
A
316 stainless steel
B
Stroke (C)
Type 10-23
IMPORTANT: Install always End-fittings not included, M8 rod ends.
with the tube upwards.
A B C D Force
Gas springs
Ref.: 123125 10 23 300 700 60N
Ref.: 123146 10 23 300 790 250N
304 SS ball joint Ref.: 123126 10 23 370 840 220N
Clevis fork Type “C” Eye Type “E”
Type “MB” Ref.: 123140 10 23 390 850 300N
Ref.: 123097 Ref.: 123086 Ref.: 123119 Ref.: 123145 10 23 390 855 300N
Ref.: 123127 10 23 400 880 500N
Ref.: 123133 10 23 400 1140 Adjustable
Type 14-28
M10 end-fittings End-fittings not included, M10 rod ends.
A B C D Force
263
GAS SPRINGS
A B C D Force
mm mm mm mm Newtons (N)
Steel. Black powder coated tube. Chrome steel rod.
Ref.: 123047 8 18 90 250 200
With Ø8m eye type terminals.
Ref.: 123052 8 18 135 365 200
Ref.: 123053 8 18 220 550 380
Ref.: 123048 8 18 135 365 100
Ref.: 123049 8 18 220 550 200
Mounting brackets on page 241.
150 kg.
Electropolished
stainless steel.
400 kg.
Countless
Electropolished Max. static
applications. load
stainless steel.
Ref.: 123009 Countless
applications.
Max. static load over short side: 1.800kg.
Max. static load over long side: 800kg. Ref.: 123016
A: 165mm
Ref.: 123008 B: 320mm
A B C P1 P2
mm mm mm Kg Kg
Ref.: 123101 20-35 247 44 60 30
264
12 ø6 SPRING LOADED LID STAYS
13,5
A B
A B
Lid stays
LID STAYS
10
14
26,5 Stainless steel, satin.
19 Max. load: 15kg.
30 Positive stop to keep flap opened.
A
Non-handed.
12
20
48 19
A B
Stainless steel
350 - 570mm
310 - 510mm Ref.: 121812
Ref.: 122087
Overall length:
500mm Opening:
220mm
Chrome
Opening: brass
250mm
Ref.: 123024
Ø13mm
Chrome
Chrome
brass
brass
330-570 mm Ref.: 123031
Ref.: 123022 Ref.: 123023 280-460 mm Ref.: 123030
265
SPRING STAYS 90º BRACKETS
Stainless steel
Stainless steel
Length: - 220mm
Spring Ø - 11mm Ref.: 123011
30 mm. Ref.: 123018
Ref.: 121811
Suitable for nylon portholes and hatches, fitted with stainless steel sliding rod; this
special sliding system ensures an extraordinary locking and a remarkable travel at the
same time. From 220 to 480mm.
Ref.: 123012
Kick down door holder. Body and bolt made from 304 Stainless
Steel, satin finished. With black rubber foot. The bolt is pushed
down until the foot sticks on the floor. For releasing the door a
gentle push on the check plate suffices. Max. throw: 30mm.
Ref.: 122086
266
ELECTRIC HATCH LIFTS
According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installations for
heavier loads. It is also possible to install more than two AV actuators in multiple applications.
Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
Stainless steel telescopic ram for manual operation in case of emergency.
IP65.
Retracted length Stroke Force (Kgf) V
A B C Force (Kgf)
Ref.: 046091 1168 740 428 226
Ref.: 046092 1168 740 428 453
267
NYLON DOOR HOLDERS
Stainless steel
316 stainless
steel
Electro polished
Ref.: 122009 Ref.: 122008 stainless steel.
Ref.: 122011
49 Force: 3,5kg.
Stainless steel. Swiveling,
A B C mm 30 surface mount plate.
29
Ref.: 122018 51 64 30 A B C D E
50 Ref.: 122075 34 46 19 15 46
Ref.: 122019 51 90 30 Ref.: 122048
268
MAGNETIC DOOR HOLDERS
Magnetic catch.
Hermetically sealed.
Strong magnetic force.
Application for clean room and water environment.
Screws not included.
Recommended screw size: m4 binding head.
Straight 90º
Ref.: 121124 Ref.: 121125
Door holders
MAGNETIC DOOR HOLDERS
Stainless steel
Straight
Ref.: 121126
Holding force: 4Kg.
Straight
Ref.: 121127 Straight or 90º
Holding force: 2,7Kg. Ref.: 121131
A Force
Black
Ref.: 122076 58mm 10,7Kg
Ref.: 122071
Ref.: 122077 50mm 4,58Kg
White
Ref.: 122078 50mm 3,8Kg
Ref.: 122072
269
MAGNETIC DOOR HOLDER MAGNETIC DOOR HOLDERS
Chrome brass.
Force: 10kg. Neoprene mounted.
Ø64mm
Striker: 58x35mm.
Overall size Force
Overall size: 70mm
75 Ref.: 122004 16
48 Ref.: 122003 10
37 Ref.: 122002 4
Ref.: 122005
Base: Ø52mm.
A B C D (mm)
Overall: 70mm.
Ref.: 122006 19 47 38 22 Chrome brass.
8
Nylon.
Adjustable knuckle catch
from 8 to 20kg.
Force is adjustable by Nylon/rubber.
turning screw.
(41) 58
8
Ref.: 121121
67
Ref.: 122012 17
Base: Ø45mm
Chrome brass Distance: 80mm
and rubber.
Base:
65x35mm
Folding.
Ref.: 122032 Ref.: 122039 Chrome brass.
Ref.: 122023
450x220xØ18mm
270
CLOSET EXTENSION HANGERS
A B
Stainless steel, satin.
Ref.: 122065 330 545 Supplied with stainless steel screws (3.5x25).
36
A
95
27
Ø 13
A
B
Hanger rod - 304 stainless steel, rod retainer - steel,
C end cap - plastic.
D
Finish: chrome/black.
Supplied with screws (4x0.7, 4X25)
FLUSH HANDLES
Flush pull.
Materials:
Face plate: 316 stainless steel.
Backing: ABS plastic.
Finish: Mirror.
Supplied with stainless steel screws (M4x14, M4x10).
mm A B C D E F G
HANDLES
Stainless steel.
A B
A B C
C Ref.: 122052 75 7 30
271
HANDLES
Fingergrip Smooth A B C
Ref.: 161020 229 45 39
Ref.: 161021 Ref.: 161023 305 45 39
Ref.: 161022 Ref.: 161024 457 45 39
bases.
272
LOUVRED AND DRILLED VENTILATORS
Stainless steel.
Stainless steel. 380x192mm
380x192mm Adjustable ventilator.
Ventilation
Ref.: 051040 Ref.: 051050
273
FOLDING HOOK
316 stainless steel
28
50
Ref.: 122051 50
10
D
Ref.: 122064 C
A B
4
A B C D E
20
ø4,4 Polished stainless Ref.: 122058 17 22 15 27 9
15
steel.
35
Ref.: 122059 17 30 22 33 10
36
A E
A D
Polished stainless
steel. D
B B
C E
A B C D E A B C D E
Ref.: 122056 28 12 19 25 25 Ref.: 122054 12 19 26 40 5
Polished stainless
Ref.: 122057 36 16 25 32 33 Ref.: 122055 16 25 32 55 6
steel.
40 24
B D
14
E
A
E D
C
B C
A B C D E A B C D E
274
HOOKS
Chrome brass
Base: 38x53mm.
Projection: 90mm.
Ref.: 122047
Base: 37x40mm.
Overall: 90mm.
Ref.: 122045
Hooks
Base: 85x41mm. Base: 15x30mm.
With 3 swinging arms. Overall: 50mm.
Ref.: 122085
Ref.: 060851
To set and remove quilted
tapestry of the boat.
Stainless steel.
50x50mm
Ref.: 122043
275
GREENER BATTERY MAINTENANCE
For use with 12v Lead Acid, Gel Lead Acid or AGM Batteries.
Single battery operation.
Ref.: 090045
TRIPLES the capacity
of your battery!
Increase your battery lifespan by at least 100%.
Charge your battery faster.
Replace your battery less often - Environmentally friendly.
Can restore older batteries - in conjunction with a 12v charger (providing there is no mechanical damage).
Usable energy of Puls-R 12V treated batteries is, when 50% of its lifespan has been reached,
340% higher than that of untreated batteries.
Technology at a glance:
Renewal of the active material in the battery.
Promotion of the growth of fine lead dioxide crystals on positive electrodes for a more homogeneous and
better functioning electrode.
Transformation of lead sulphate crystallised on negative electrodes into lead and sulphuric acid.
Reduction in the formation of larger lead sulphate crystals.
Helps protect your battery against poor charge management.
276
STRAP FOR BATTERY BOX MARINE BATTERY BOXES
With hardware.
SMALL
316 stainless steel.
290x190x200mm
Ref.: 060014
BIG
Ref.: 060023 395x185x210mm
Ref.: 060015
Strap: 25x960mm.
Base dimensions:
70x40mm
A B
Battery accessories
Lead alloy 60 24 Ref.: 034040 Thread Ø: M10
Bronze 55 20 Ref.: 034041
Red Ref.: 034042
Bronze 46 24 Ref.: 034046
Black Ref.: 034043
Cable Ø A B C
25 8 7 47 Ref.: 091501
35 10 9,2 49 Ref.: 091502
Swiveling Fixed 50 10 12 60 Ref.: 091503
Ref.: 294001 Ref.: 034045 75 12 13 60 Ref.: 091504
Insulates single stud on alternators, starters, windlasses and high amperage termination
points.
Sold separately.
Red Black
Cable 0,82-5,26mm2 Ref.: 294008 Ref.: 294009
Cable 8,36-21,14mm2 Ref.: 294010 Ref.: 294011
Cable 8-32mm Ref.: 294017
2
Ref.: 294016
Cable 33,61-67,40mm2 Ref.: 294012 Ref.: 294013
Cable 84,97-107,16mm2 Ref.: 294014 Ref.: 294015
277
BATTERY SWITCH SWITCH-SELECTOR BATTERY SWITCH-SELECTOR
BATTERY SWITCH
Brass.
Up to 24V.
250A continuous.
2.500A intermittent. ...we work to
offer the best
service
Ref.: 090016
278
ON/OFF MINI BATTERY SWITCH - RED - KEY
Switches a single battery to a single load group. 300A continuous-775A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals.
Multiple installation options. Labels with icons available to identify the circuits (see Ref.: 217902).
IP66. Ignition protected.
Dimensions: 72x72mm.
A V
300A MAX 48V DC MAX Ref.: 296005
Battery switches
A V
300A MAX 48V DC MAX Ref.: 296009
Colour
279
ON/OFF MINI BATTERY SWITCH - RED - DUAL CIRCUIT
Simultaneously switches two isolated battery banks or simultaneously switches the two (+) (-) poles of one battery.
300A continuous-650A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals. Multiple installation options. Labels with icons available to identify the
circuits (see Ref.: 217902). IP66. Ignition protected.
Dimensions: 72x72mm.
Option 1 Option 2
A V or
300A MAX 32V DC MAX Ref.: 296010
ON/OFF MINI BATTERY SWITCH - RED - DUAL CIRCUIT PLUS WITH BATTERY COMBINE
Simultaneously switches two isolated battery banks or combines battery banks to all loads.
300A continuous-650A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals. Multiple installation options.
Labels with icons available to identify the circuits (see Ref.: 217902). IP66. Ignition protected.
Dimensions: 72x72mm.
A V
300A MAX 32V DC MAX Ref.: 296011
A V
300A MAX 32V DC MAX Ref.: 296007
300A MAX 32V DC MAX Ref.: 296012 *
*Black
E-SERIES BATTERY SWITCH ON/OFF
Switches a single battery to a single load group.
350A continuous-1000A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals. Cable size to meet ratings: 4/0 AWG (120mm²). Multiple installation
options. Labels with icons available to identify the circuits (see Ref.: 217902). IP66. Ignition protected.
Dimensions: 98x98mm.
A V
350A MAX 48V DC MAX Ref.: 299003
A V Option 1 Option 2
or
350A MAX 32V DC MAX Ref.: 295510
ON/OFF E-SERIES BATTERY SWITCH - DUAL CIRCUIT PLUS WITH BATTERY COMBINE
Simultaneously switches two isolated battery banks or combines battery banks to all loads.
350A continuous-750A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals. Cable size to meet ratings: 4/0 AWG (120mm²). Multiple installation
options. Labels with icons available to identify the circuits (see Ref.: 217902). IP66. Ignition protected.
Dimensions: 98x98mm.
A V
350A MAX 32V DC MAX Ref.: 295511
280
E-SERIES BATTERY SWITCH-SELECTOR - RED - 3 POSITIONS
Switches a single battery to a single load group.
350A continuous-1000A intermittent-1 minute.
Tin-plated copper studs (length 222mm) for maximum conductivity and corrosion resistance.
Studs accept 3/8” (M10) ring terminals. Cable size to meet ratings: 4/0 AWG (120mm²). Multiple installation options.
Labels with icons available to identify the circuits (see Ref.: 217902). IP66. Ignition protected.
Dimensions: 98x98mm.
A V
350A MAX 32V DC MAX Ref.: 291101
A V
350A MAX 32V DC MAX Ref.: 299001
Battery switches
A V
600A MAX 32V DC MAX Ref.: 293000
A V
500A MAX 32V DC MAX Ref.: 293003
281
REMOTE BATTERY SWITCH ML-RBS 500A WITH MANUAL CONTROL
Manual override knob provides an added level of safety allowing control with or without power and
offering LOCKED OFF capability for servicing. LED output to remotely indicate switch state - requires
optional LED. 3/8”-16 tin-plated copper studs for maximum conductivity and corrosion resistance.
7/8” (22 mm) stud length accepts multiple cable terminals.
Label recesses for circuit identification. Silver alloy contacts provide high reliability for switching live
loads. Dimensions: 139x95x52mm.
The compact design allows for three mounting styles: surface, rear, or panel mount. The M-ACR is
also available as a module in a Custom 360 Panel.
Features: senses charging on two battery banks, pull off and snap on insulating cover and LED indicates
ACR status. IP67. 1/4” x .032” male quick connect terminal for ground.
Dimensions: 72x72x65mm.
Ref.: 297609
Ref.: 297610
282
(ON)/OFF/(ON) REMOTE CONTROL CONTURA PANEL SWITCH
Specifically manufactured for use in Blue Sea Systems Contura Water Resistant Panels.
Vibration, shock, thermoshock, moisture and salt spray resistant.
Meets “ignition protection” UL 1500 and ISO 8846 requirements. IP67.
Lockout slides reduce the risk of accidental switching.
Actions: (ON)-OFF-(ON).
Cut hole: 37x21mm .
Ref.: 292145
Specifically manufactured for use in Blue Sea Systems Contura Water Resistant Panels.
Vibration, shock, thermoshock, moisture and salt spray resistant.
Meets “ignition protection” UL 1500 and ISO 8846 requirements. IP67.
Lockout slides reduce the risk of accidental switching.
Actions: ON-OFF-ON.
Cut hole: 37x21mm .
Ref.: 292146
Battery switches
Ref.: 292155
Ref.: 291147
Ref.: 291148
283
SOLENOIDS
SPST SPDT
Continuous duty spst PVC-coated. Insulated.
normally OFF. Continuous capacity:
PVC-coated. Insulated. 35A - front contacts normally OFF.
One pole - one circuit. 85A - side contacts normally ON.
One pole - double circuit.
Ref.: 090023 12V - 85A Ref.: 090025
Ref.: 090024 24V - 65A
Ref.: 090020
SOLENOIDS 100A
SPST. One pole one circuit. normally open contacts, 100A
make and break. 400A inrush. Typically used to start small
engines Silver contacts. Continuous duty, 100A. Cycle life 50,000
minimum. Tin-plated copper studs for maximum conductivity
and corrosion resistance.
Ref.: 299012
LINK BUS
Tin-plated copper for maximum conductivity and corrosion resistance.
Ref.: 299160 ML-Series and Automatic Charging Relays. 500A continuous. 1 unit.
284
IGNITION SWITCHES IP67 IGNITION SWITCHES
With anti-restart.
10A at 12V, 5A at 24V, 3A at Plastic case and front.
36V and 2A at 48V DC.
Fully sealed thermoplastic
using O-rings and ultrasonic
welding to protect switch to
IP67. Accepts Deutsch-type
connector. 2 keys.
Ignition switches
4 positions (Acc-Off-Ign-Ign/Start) Ref.: 090115 With safety key Ref.: 034020
Weather-resistant rubber boot Ref.: 090116 With safety key and float Ref.: 034023
285
ALTERNATORS 24V DC
Ref.: 090301
BATTERY ISOLATOR
2 BATTERY V A máx.
Ref.: 090031 12-24-32 42
Ref.: 090032 12-24-32 70
3 BATTERY
Ref.: 090033 12-24-32 90 A máx.
3-Stud Battery Isolators. Ref.: 090034 12-24-32 140 Ref.: 090031 120
For use with alternators that do not have Ref.: 090035 12-24-32 200 Ref.: 090031 160
an integral electronic voltage regulator.
Ref.: 090036 12-24-32 3x100
INVERTERS
Alternators & Chargers
286
REMOTE CONTROL BATTERY SWITCH
DOLPHIN BOOSTER
Battery chargers
Output Voltage 24V 24V
Amperage 30A 30A
Input voltage 12V 24V
Input fuse 4X30A 4X30A
Number of outputs 1 1
Dimensions 96x120x238mm
Weight 1,30Kg
DOLPHIN ALL-IN-ONE
287
DOLPHIN PREMIUM
Professional terminals
Easy access controls Charge indicator WINSTA-WAGO
PHOENIX CONTACT
Battery chargers
Ref.: 090050 Ref.: 090051 Ref.: 090052 Ref.: 090053 Ref.: 090054
Output Voltage 12V 12V 12V 12V 24V
Amperage 10A 15A 25A 40A 20A
Input voltage 230V 230V 115/230V 115/230V 115/230V
Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Input fuse 2A 3,15A 6A 10A 10A
Number of outputs 3 3 3 3 3
Output fuse 15A 20A 2 X 15A 2 X 25A 2 X 15A
Operating temp. -10°C A + 50°C
Storage temp. -20°C A + 70°C
Humidity 10% a 90% (without condensation)
Ventilation Natural Forced fan cooling
Dimensions 96x120x238mm 96x120x354mm
Weight 1,30Kg 1,90Kg
288
DOLPHIN PRO
3 isolated outputs.
Evolution of the Dolphin 2 range : the Dolphin Pro has an internal low voltage drop
isolator.
User friendly design: a solid and compact casing in aluminium, mounting by 4 easily
accessible screws, a front cover allowing easy access to the charge selector and the
wiring connections (4 solid M8 terminals for the battery outputs), a cable gland for the
input cable and a cable grommet with a waterproof seal.
Integrated Control Panel : LED display indicating the charging curve; boost, absorption,
floating as well as anomalies and faults :
temperature, voltage, fuses...
Automatic switchover: equipped with 3 isolated outputs, automatic switchover 115V
/ 230V, 50Hz / 60Hz, 9 charging programmes (including 1 winterizing and 1 power
supply) depending on battery
type, makes this charger suitable for all charging needs.
Optional extras : External touch screen control panel Touchview and a battery
temperature sensor allowing a charging level adjustment. Conformal coating of the
PCB to prolong the life of the battery charger.
Battery chargers
Ref.: 090055 Ref.: 090042 Ref.: 090056 Ref.: 090057 Ref.: 090058 Ref.: 090059
DOLPHIN PRO HD
Operating temperature: -10°C to + 65°C
Storage temperature: -20°C to + 85°C
Humedity: 10% to 95% (Without condesation)
Ventilation: Forced fan adjustable speed cooling
289
ROTARY SWITCH 30A - 2 POSITIONS+OFF
Heavy duty industrial rated switch.
Compact solution when circuit protection is provided elsewhere.
Allows connecting one of two different AC sources to one circuit.
Cable size: AWG 10-AWG 14.
Dimensions: 48x48mm.
Ref.: 299009
Ref.: 299011
Ref.: 299010
Ref.: 291484
Ref.: 291486
Ref.: 291485
290
4 SWITCHES, 4 THERMAL CIRCUIT BREAKERS
AND CIGARETTE SOCKET PANEL
IP65
(ON) 1
1
Switch
ON-OFF-ON
ON-OFF
Circuit breaker
10A
15A
= 1
1
ON-OFF
(ON)-OFF
10A
10A
3 SWITCHES/THERMAL CIRCUIT BREAKERS PANEL 3 SWITCHES AND THERMAL CIRCUIT BREAKERS PANEL
IP65 IP65
Switches/thermal circuit breakers 1120. Switch Circuit breaker
1 ON-OFF 3A 1 ON-OFF-ON 10A
1 ON-OFF 8A 1 ON-OFF 15A
1 ON-OFF 16A 1 (ON)-OFF 10A
Switches/thermal Switches/thermal
circuit breakers 3130. circuit breakers 3130.
2 ON-OFF 15A 3 ON-OFF 20A
1 (ON)-OFF 20A 1 (ON)-OFF 5A
Dimensions: 89 x 65 mm.
Dimensions: 116x78mm
Black powder coated stainless steel panel.
Ref.: 035503
Ref.: 034500
Black powder coated stainless steel panel.
291
2 SWITCHES/THERMAL CIRCUIT BREAKERS PANEL 3 SWITCHES/THERMAL CIRCUIT BREAKERS PANEL
IP65 IP65
Switches/thermal
Switches/thermal
circuit breakers 3131.
circuit breakers 3131.
1 ON-OFF 10A
1 ON-OFF-ON 5A
1 ON-OFF-ON 5A
1 (ON)-OFF 3A
1 (ON)-OFF 3A
Dimensions: 89x65mm.
Dimensions: 121x65mm.
Black powder coated stainless steel
panel. Black powder coated
Ref.: 900088 Ref.: 900097
stainless steel panel.
Ref.: 034515 Black powder coated stainless steel Ref.: 034516 Black powder coated stainless steel
panel. panel.
Switches/thermal Switches/thermal
circuit breakers 3131. circuit breakers 3131.
5 ON-OFF 10A 4 ON-OFF 8A
1 (ON)-OFF 8A 2 ON-OFF 20A
2 (ON)-OFF 8A
Dimensions: 188x78mm.
Dimensions: 131x129mm.
Ref.: 034517 Black powder coated
Ref.: 034518
stainless steel panel.
Select actuator on page 277 Select actuator on page 277
6 SWITCHES AND THERMAL CIRCUIT BREAKERS PANEL 6 SWITCHES AND THERMAL CIRCUIT BREAKERS PANEL
2 ON-OFF 10A Black aluminium plate,
2 ON-OFF 15A anti-magnetic, seawater resistant.
1 ON-OFF 20A 6 switches and 6 thermal circuit
1 (ON)-OFF 10A breakers of 10A.
Dimensions: 100x170x2mm.
Labels included.
Max. 28V
Dimensions: 171x135mm.
MULTI-LIGHT SWITCH
292
CONTURA PANEL - GREY - 3 SWITCHES AND FUSES
Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose
washdowns, momentary immersions.
ON-OFF Contura Switches.
ON indicating LEDs embedded in switch.
Max. voltage: 24V DC.
Dimensions: 133x95x79mm.
Ref.: 298054
Ref.: 298262
Switch panels
Ref.: 298053
Ref.: 298261
293
CONTURA PANEL - BLACK - 6 SWITCHES AND CIRCUIT BREAKERS
Designed for flybridge and open cockpit applications.
Panel front IP66. Ignition protected.
ON-OFF Contura Switches.
ON indicating LEDs embedded in switch.
Watertight mounting gasket.
Push button reset-only circuit breakers with waterproof boots.
Max. voltage: 24V DC. Dimensions: 114x190x82mm.
Ref.: 298373
Ref.: 298371
Ref.: 298274
Ref.: 298272
Ref.: 298273
Ref.: 298271
294
WATERPROOF PANEL - 2 SWITCHES-FUSES 12V
IP67.
Designed for flybridge and open cockpit applications.
Independent label backlighting circuit for remote switching and dimming.
Each panel can be mounted in four different orientations.
Integrated ATO/ATC fuse based circuit protection.
Bicolored LEDs illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Colour) circuits.
Dimensions: 100x66x63mm.
Ref.: 294302
Ref.: 294304
Switch panels
Ref.: 294306
Ref.: 294308
295
WATERPROOF PANEL - 8 SWITCHES-CIRCUIT BREAKERS 12/24V
IP67.
Designed for flybridge and open cockpit applications.
Independent label backlighting allows switching and dimming.
Compatible with all Blue Sea Systems Digital Dimmers.
Each panel can be mounted in four different orientations.
Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch
position.
Dimensions: 108x195x88mm.
Ref.: 294378
Ref.: 291150
12/24V 250V
Ref.: 298033 Ref.: 298167 AMBER
Ref.: 298171 Ref.: 298166 RED
Ref.: 298172 Ref.: 298134 GREEN
296
V-SERIES CONTURA SWITCHES SINGLE POLE
IP65
ON-OFF-ON Ref.: 090118
Fully sealed at the front. Advanced design.
20A max. 4-14VDC - 15A max. 15-28VDC ON-OFF Ref.: 090120
15A max. 125VAC - 10A max. 250VAC
(ON)-OFF Ref.: 090121
BEZELS FOR MOUNTING SWITCHES SIDE BY SIDE (ON)-OFF-(ON) Ref.: 090122
Ref.: 090129 Ref.: 090137 Ref.: 090131 Ref.: 090132 Ref.: 090139 Ref.: 090166 Ref.: 090317 Ref.: 090127
* Ref.: 090147 Ref.: 090148 Ref.: 090146 Ref.: 090145 Ref.: 090144 Ref.: 090149 Ref.: 090143 Ref.: 090243
*PVC finish.
Switches
Ref.: 090134 Ref.: 090135 Ref.: 090136 Ref.: 090130 Ref.: 090138 Ref.: 090133 Ref.: 090142 Ref.: 090165 Ref.: 090128
Ref.: 090188 Ref.: 090194 Ref.: 090196 Ref.: 090197 Ref.: 090186 Ref.: 090187 Ref.: 090167 Ref.: 090198
297
THERMAL OVERCURRENT CIRCUIT BREAKERS 3130
IP65
Actuator removal.
Ref.: 090280 Ref.: 090283 Ref.: 090286 Ref.: 090289 Ref.: 090295 Ref.: 090310
Ref.: 090281 Ref.: 090284 Ref.: 090287 Ref.: 090290 Ref.: 090293 Ref.: 090296 Ref.: 090311
Circuit breakers
Ref.: 090282 Ref.: 090285 Ref.: 090288 Ref.: 090291 Ref.: 090294 Ref.: 090297 Ref.: 090312
Stainless steel black powder coated plate. Stainless steel black powder coated plate.
Ref.: 091186 Ref.: 091200
298
SWITCHES/THERMAL CIRCUIT BREAKERS 3131
IP65
V Ref.: 091120 Ref.: 091121 Ref.: 091122 Ref.: 091123 Ref.: 091124 Ref.: 091125 Ref.: 091126 Ref.: 091127 Ref.: 091128
H Ref.: 091150 Ref.: 091151 Ref.: 091152 Ref.: 091153 Ref.: 091154 Ref.: 091155 Ref.: 091156 Ref.: 091157 Ref.: 091158
Circuit breakers
V Ref.: 091129 Ref.: 091130 Ref.: 091131 Ref.: 091132 Ref.: 091133 Ref.: 091134 Ref.: 091135 Ref.: 091136 Ref.: 091137
H Ref.: 091159 Ref.: 091160 Ref.: 091161 Ref.: 091162 Ref.: 091163 Ref.: 091164 Ref.: 091165 Ref.: 091166 Ref.: 091167
GPS VHF
V Ref.: 091138 Ref.: 091139 Ref.: 091140 Ref.: 091141 Ref.: 091142 Ref.: 091143 Ref.: 091144 Ref.: 091145 Ref.: 091146
H Ref.: 091169 Ref.: 091170 Ref.: 091171 Ref.: 091172 Ref.: 091173 Ref.: 091174 Ref.: 091180 Ref.: 091179
Ref.: 090169
Independent bezel Ref.: 091181 Ref.: 091182 Ref.: 091183
Dimensions: 100x78mm. Dimensions: 130x78mm. Dimensions: 188x78mm.
299
PANEL TOGGLE SWITCHES
For panels up to 9mm thickness.
12/24V - 15A
Terminals Function
Ref.: 090101 2 ON-OFF
Ref.: 090102 2 (ON)-OFF
Ref.: 090103 3 ON-OFF-ON
Ref.: 090104 3 (ON)-OFF-(ON)
Ref.: 090105 6 ON-OFF-ON
Ref.: 090106 6 (ON)-OFF-(ON)
Ref.: 090108 3 ON-OFF-(ON)
Ref.: 090110 6 ON-OFF-(ON) Rubber cap
Ref.: 090109 3 OFF-ON-ON Ref.: 090107
o r e alarm
See m ces on
Ref.: 090040 12V
devi NDERS
Ref.: 090041 24V
L SE
300 LEVE
“PV4” MOMENTARY & SWITCHES
Vandal and water resistant. Long life expectancy. Front panel mount. Stainless steel.
Up to 2A. IP65. Cut hole: Ø19mm.
Switches
JOYSTICK MOMENTARY SWITCH JOYSTICK SWITCH WITH PANEL PUSH BUTTON SAFETY SWITCH
IP54.
16A - 120/240VAC.
Panel cutout:
46x22mm.
Ref.: 091189
Ref.: 090470
301
BULKHEAD SWITCHES AND SOCKETS
Reduced dimensions: 60x60mm frame. Minimum depth.
Ref.: 090150 White Ref.: 090154 White Ref.: 090156 White Ref.: 090158 White
Ref.: 090185 White (ON)-OFF Ref.: 090155 Black Ref.: 090157 Black Ref.: 090159 Black
Ref.: 090151 Black
Ref.: 090182 Chrome
TWO-WAY SWITCHES
59,5
12V/24V SOCKETS
59,5
Ref.: 090160 White
Bezel is needed:
1 ELEMENT BEZELS
1 ELEMENT BEZELS WITH LID 2 ELEMENT BEZELS SQUAREHOUSINGS
16mm 41mm
Ref.: 090170 White Ref.: 090176 White Ref.: 090174 White
Ref.: 090180 White Ref.: 090178
Ref.: 090171 Black Ref.: 090177 Black Ref.: 090175 Black
Ref.: 090172 Chrome matt Ref.: 090181 Black Ref.: 090179
Ref.: 090184 Chrome
Ref.: 090173 Gold Can be surface mount with the
correct base.
Ref.: 090183 Chrome
302
CRIMPABLE IN LINE AGC/MDL FUSE HOLDER
Accepts 12-18 AWG cable.
Max. amperage: 30A.
Glass fuse sold separately (see Ref.: 295201 to -34).
Ref.: 295060
Ref.: 295061
0,25A Ref.: 295201 2A Ref.: 295206 5A Ref.: 295210 15A Ref.: 295217
0,5A Ref.: 295202 2,5A Ref.: 295207 6A Ref.: 295211 20A Ref.: 295218
1,5A Ref.: 295205 4A Ref.: 295209 7,5A Ref.: 295213 30A Ref.: 295220
3A Ref.: 295226 6,25A Ref.: 295228 10A Ref.: 295230 25A Ref.: 295233
5A Ref.: 295227 7,5A Ref.: 295229 15A Ref.: 295231 30A Ref.: 295234
303
FUSE BLOCK FOR MAXI FUSES
The most economical fuse block for 30-80 Ampere fusing.
Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements.
Accepts wire sizes 18-4 AWG from sides or bottom.
For use on systems up to 32V DC.
Ring terminal screws compress fuse blades within blocks for extremely low resistance connections.
Accepts MAXI Fuses MAXI blade fuse sold separately (see Ref.: 295138 to -43).
Dimensions: 51x73,5mm.
Ref.: 295006
MAXI FUSES
Provides economical branch circuit protection.
Silver-plated connector blades for corrosion resistance.
Visible indication of blown condition.
MIDI/AMI FUSES
Fast-acting type fuses ideal for electronic devices. Clear window offers visible indication of blown condition.
Colour-coded for easy amperage identification. Tin-plated connector blades for corrosion resistance.
MEGA/AMG FUSES
Most economical fuse for 100-300A circuit protection. To be used with MEGA/AMG fuse blocks.
Max. voltage: 32V DC.
304
TERMINAL FUSE BLOCK
New isolated stud design uses standard M8 (5/16”) hardware and permits stacking of terminals.
Compact, high-amp fuse: appropriate for DC Main, inverter, windlass, and bow thruster circuit protection.
Provides high current protection in tight space constraints.
Weatherproof: suitable for small open-cockpit boats and other harsh environments.
Insulating cap prevents accidental shorts.
Fuse sold separately.
Compact, permits fuses up to 300A (see Ref.: 295175 to -190).
Max. voltage: 58V DC. Weatherproof. Insulating cap prevents accidental shorts.
Dimensions: 61x20x44mm. Eyelet Ø: 9,5mm. Ref.: 295191
40A Ref.: 295176 80A Ref.: 295181 150A Ref.: 295185 225A Ref.: 295188
50A Ref.: 295177 90A Ref.: 295182 175A Ref.: 295186 250A Ref.: 295189
60A Ref.: 295178 100A Ref.: 295183 200A Ref.: 295187 300A Ref.: 295190
Ref.: 295502
CLASS T FUSES
20,000A interrupt Rating. Extremely fast short-circuit response. Recommended by most inverter manufacturers.
High interrupt capacity for large battery banks including Lithium-ion and TPPL batteries. Max. voltage: 160V DC.
305
ANL FUSE BLOCK WITH COVER - 300A MAX
For use on systems up to 32V DC.
Swing out design allows replacement of the fuse without removing fasteners.
Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact.
UL 94-V0 base resists high heat.
Insert moulded studs ensure secure fuse mounting.
Fuse sold separately (see Ref.: 295123 to -35 and 295161 to -65).
5/16-18” (M8) stud terminals and cables up to 2/0 AWG. Dimensions: 115x38x42mm.
Ref.: 295005
ANL FUSES
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500A only).
6,000A Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks.
Silver-plated connector blades for corrosion resistance. Visible indication of blown condition.
Max. voltage: 32V DC.
350A Ref.: 295135
40A Ref.: 295165 130A Ref.: 295126 250A Ref.: 295131 500A Ref.: 295137
50A Ref.: 295122 150A Ref.: 295127 275A Ref.: 295132 600A Ref.: 295161
60A Ref.: 295123 175A Ref.: 295128 300A Ref.: 295133 675A Ref.: 295162
80A Ref.: 295124 200A Ref.: 295129 325A Ref.: 295134 750A Ref.: 295163
Ref.: 295065
1A Ref.: 295235 4A Ref.: 295238 10A Ref.: 295241 25A Ref.: 295244
2A Ref.: 295236 5A Ref.: 295239 15A Ref.: 295242 30A Ref.: 295245
306
RESETTABLE BLADE FUSES RESETTABLE BLADE FUSES 1610
Standard resetting by
Standard resetting by pushing the
pushing the manual head
manual head button.
button.
Max. 28V.
Max. 32V.
6A Ref.: 090231
5A Ref.: 091499 10A Ref.: 090232
10A Ref.: 091498 15A Ref.: 090233
15A Ref.: 091497 20A Ref.: 090234
20A Ref.: 091496 25A Ref.: 090235
MILANO BLADE FUSE BLOCKS BLADE FUSE BLOCKS FUSE BLOCK - 6 CIRCUITS
6 independents circuits and clear cover.
Corrosion resistant,
tin-plated copper
fuse clips. Spare
fuse holder in
cover.
Accepts ring
terminals.
Includes two
Polycarbonate with tin plated copper With clear cover and sealing gasket. terminal block
contacts. With common positive. Bayonet terminals. jumpers. Max. 30A
Transparent cover with labels for single Not compatible with resettable fuses. per circuit.
uses. 150A max load for each block. Dimensions: For
Screw terminals. ATO/ATC fuses.
Not compatible with resettable fuses.
6 contacts - 92x66mm Ref.: 090460 6 contacts - 100x27mm Ref.: 090462
12 contacts - 92x116mm Ref.: 090461 10 contacts - 100x29mm Ref.: 090463 Ref.: 295035
307
SAFETY-HUB 100 - FUSE BLOCK 7 CIRCUITS - 12V DC
Combines an ignition protected fuse block and an integrated connecting plug. It is safe for use on gasoline powered
boats, reduces wiring connections, and consolidates up to seven fused circuits.
3 x 30A-200A MIDI/AMI fuses (250A max.) (sold separately) and 4 x 1A-20A ATO/ATC fuses (50A max.) (sold
separately). Total max. 350A. Sealed cover protects fuses from the harsh marine environment: IP66. Integrated
connector plugs provide a secure, waterproof connection. Ignition protected.
Min. cable section 4/0 AWG. Ring terminals recommended M8 (5/16”).
Dimensions: 99x146x56mm.
Ref.: 297725
Ref.: 297748
Min. cable section 4/0 AWG. Ring terminals recommended M8 (5/16”). Dimensions: 122x146x73mm.
Ref.: 297727
Ref.: 295015
Ref.: 295018
308
FUSE BLOCK WITH NEGATIVE BUS - 6 CIRCUITS - BLADE FUSE
Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing
easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems” Small Format
Labels for circuit identification. Fuse blocks with covers include 20 write-on circuit labels.
Tin-plated copper buses and fuse clips. Accepts ring or spade type terminals.
Accepts ATO and ATC fast acting blade fuses. Fuses sold separately.
Max. voltage: 32V DC. Max. amperage: 30A per circuit and 100A per block.
Dimensions: 84x124x38mm.
Ref.: 295025
Fuse blocks
Dimensions: 84x93x38mm.
Ref.: 295028
Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing
easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems” Small Format
Labels for circuit identification. Fuse blocks with covers include 20 write-on circuit labels.
Tin-plated copper buses and fuse clips. Accepts ring or spade type terminals.
Accepts ATO and ATC fast acting blade fuses. Fuses sold separately.
Max. voltage: 32V DC. Max. amperage: 30A per circuit and 100A per block.
Dimensions: 84x132x38mm.
Ref.: 295029
3A Ref.: 292156
Bridge for circuit breackers
5A Ref.: 292157
Ref.: 292172
10A Ref.: 292158
309
TYPE 1110 TYPE 2-5700
TYPE 4120
310
TYPE 1658 TYPE 3120
Thermal overcurrent circuit
Switch/thermal overcurrent
breaker. Very cost effective
design to meet international circuit breaker. Rocker
requirements. Manual reset, actuation. Snap-in panel
cycling trip-free mechanism. mounting.
Max. 28V.
Max. 28V single pole. 5A Ref.: 090203 Single pole Double pole
10A Ref.: 090206 5A Ref.: 090220
Circuit breakers
TYPE 105
Miniaturised single pole thermal circuit breaker
with push-to-reset, tease-free, trip-free, snap
action mechanism. Snap-in panel mounting.
311
HYDRAULIC-MAGNETIC CIRCUIT BREAKERS
TYPE 8345
SINGLE POLE DOUBLE POLE
Ref.: 091201 10A Ref.: 091211
Ref.: 091202 20A Ref.: 091212
Ref.: 091203 30A
Ref.: 091209 40A
Ref.: 091204 50A Ref.: 091213
Ref.: 091205 60A
DOUBLE POLE
Ref.: 091206 80A Ref.: 091214
M6 100A Ref.: 091215
Ref.: 091207
terminals
Ref.: 091208 125A Ref.: 091216 SINGLE POLE
120/240V - 50A
Provides over current and leakage protection per
ABYC E-11 for whole boat shore power protection.
Meets UL 1500 external ignition protection
requirements.
Trips on short circuit, overload, or leakage to
ground.
Front panel mount, installed in a power distribution
panel
Ref.: 297585
Ref.: 091217
312
CIRCUIT BREAKERS ST PUSH BUTTON RESET - AC/DC
Branch circuit breakers (can also be used for 24-hour circuit protection).
Quick connect terminal style circuit breakers. Compact design enables high density circuit
protection configurations. Push-to-reset operation. “Trip Free” design cannot be held “ON”
during fault current condition. Ignition protected: safe for installation aboard gasoline powered
boats. Optional push button waterproof boot. Max. voltage: 32V DC.
Circuit breakers
CIRCUIT BREAKERS
Water and vapour proof automatic windlass fuses.
Combines switching and circuit breaking into one unit.
Operation by lever, visible on OFF position.
Terminals with M6 nuts.
Surface mounting.
Max. voltage 30V.
80A Ref.: 044221
25A Ref.: 297035 50A Ref.: 297039 80A Ref.: 297042 120A Ref.: 297046
30A Ref.: 297036 60A Ref.: 297040 90A Ref.: 297043 150A Ref.: 297048
40A Ref.: 297038 70A Ref.: 297041 100A Ref.: 297044 200A Ref.: 297049
313
SWITCH-CIRCUIT BREAKER CARLING A-SERIES - BLACK TOGGLE - AC/DC
Combines switching and circuit protection into a single device. Single pole.
Max. voltage: 65V DC/250V AC. Magnetic-Hydraulic. CE marked. Meets American Boat
and Yacht Council (ABYC) standards.“Trip Free” design cannot be held “ON” during fault
current condition. Stainless steel screw terminals 10-32.
314
SWITCH-CIRCUIT BREAKER CARLING C-SERIES - WHITE TOGGLE - AC/DC
Combines switching and circuit protection into a single device. Single pole. Magnetic-
Hydraulic. CE marked. Provides overcurrent protection for inverters, bow thrusters, and
windlasses. “Trip Free” design cannot be held “ON” during fault current condition.
Max. voltage: 80V DC/250V AC. 1/4”-20 tin-plated brass stud terminals.
Circuit breakers
175A Ref.: 297268
315
SWITCH-CIRCUIT BREAKER DOUBLE POLE CARLING C-SERIES - RAISED ROCKER - AC
Combines switching and circuit protection into a single device. Double pole. Magnetic-
Hydraulic. Rocker actuator is raised in the “OFF” position. CE marked. “Trip Free” design
cannot be held “ON” during fault current condition. Meets protection requirements for
120/240V AC installations. AC only. Max. voltage: 250V AC.
1/4”-20 tin-plated brass stud terminals.
60A Ref.: 297582
30A Ref.: 297580 80A Ref.: 297583
50A Ref.: 297581 100A Ref.: 297584
MINI POWERPOSTS
Connects high amperage cables securely.
Base Material is PBT UL94 V0.
48V DC max.
316
TERMINAL FEED-THROUGH CONNECTORS - RED
Perfect for passing high current cables through hulls, decks and bulkheads. IP66. Max. continuous amps.: 250A.
Max. Volts: 48VDC. Stud material: tin-plated copper alloy.
Ref.: 292304
Ref.: 292305
Ref.: 292713
317
BUSBAR 10 GANG + 2T - 150A
The industry standard busbar for positive distribution and the collection of negative or AC ground circuits.
Max. continuous amps.: 130A AC/150A DC. Max. voltage: 300V AC/48V DC.
10 screw terminals 8-32 + 2 stud terminals 1/4”-20.
Ref.: 292301
BUSBAR 4T - 150A
The industry standard busbar for positive distribution and the collection of negative or AC ground circuits.
Max. continuous amps.: 130A AC/150A DC. Max. voltage: 300V AC/48V DC.
4 stud terminals 1/4”-20.
Ref.: 292303
Ref.: 292302
Busbars
318
BUSBAR 4T - 250A
Busbars are used to consolidate multiple wires or feed multiple circuits. Insert moulded stainless steel studs eliminate
need for securing nut and allow high torquing for excellent electrical contact. Raised bus provides easy access to
multiple wires on a single screw or stud. UL 94-V0 rated base material resists high heat.
Max: 250A DC/AC, 48V DC and 300V AC max. 4 stud terminals 5/16” (7,93mm).
Ref.: 292106
BUSBAR 8T + 4T - 600A
Materials: reinforced polycarbonate base and Tin-Plated Copper CDA 110/UNS11000 bus.
Max: 600A DC/545A AC, 48V DC and 300V AC max.
8 stud terminals 3/8” (9,53mm) + 4 screw terminals 8-32.
Ref.: 292107
BUSBAR 4T + 4T - 600A
Materials: reinforced polycarbonate base and Tin-Plated Copper CDA 110/UNS11000 bus.
Max: 600A DC/545A AC, 48V DC and 300V AC max.
4 stud terminals 3/8” (9,53mm) + 4 screw terminals 8-32.
Ref.: 292104
Busbars
BUSBAR COVER - 600A
For the previous busbar Ref.: 292104.
Ref.: 292708
Ref.: 292701
Ref.: 292709
319
DOUBLE BUSBAR 2 X 10T - 100A
Combines negative and positive buses on one block.
Max. continuous amps.: 100A AC/DC. Max. voltage: 300V AC / 48V DC.
ABS base and Tin-plated copper bus.
2 bars de 10 screw terminals 8-32.
Cover
Ref.: 292702 Ref.: 292710
STANDARD BUSBARS
Dimensions Connections
Ref.: 090322 106x22mm 2 x 1/4” + 5 terminals
Ref.: 090326 152x31mm 2 x 1/4” + 10 terminals
Ref.: 090325 231x31mm 2 x 1/4” + 20 terminals
Ref.: 292722
Busbars & Blocks
TERMINAL BLOCKS
Closed back design completely insulates power from the mounting surface.
Each screw pair is one isolated circuit.
Jumpers allow creation of common circuits (see Ref.: 299216, -7 and -8).
320
WATERPROOF ELECTRICAL SHUNT BOXES POWER POST
Black plastic.
Suitable for
high amperage,
determined by the
electrical cable
Dimensions Connections gauge and not by
the knot.
74x127x45mm 3 Ref.: 090418 Dimensions: 50x41mm. M10
140x100x53mm 6 Ref.: 090419 Ref.: 090338
Tinned brass.
Connectors
• For Ø3-14mm cables. polyamide.
• 10 side inputs and 2 in the ground, IP68 a 5 bar
all with membrane.
• 76Lx76Wx51Hmm.
Ref.: 090400
COMBI 308
• For Ø3-12mm cables.
• 8 side inputs with membrane and
thread for M20 cable gland.
• 85Lx85Wx51Hmm. Cable Ø
Thread mm
Ref.: 090401 ESKV 12 M12 3-7 Ref.: 090350
COMBI 607
• For Ø3-17mm cables. ESKV 16 M16 4,5-10 Ref.: 090351
• 7 side inputs with membrane and 30 % saving on labour thanks to faster cable-entry via
soft self-sealing diaphragm, no further tools required. ESKV 20 M20 6-13 Ref.: 090352
thread for M25 cable gland.
• 110Lx110Wx66Hmm. ESKV 25 M25 9-17 Ref.: 090353
ESKV 32 M32 13-21 Ref.: 090354
ESKV 40 M40 14-28 Ref.: 090355
Ref.: 090402
ESKV 50 M50 21-35 Ref.: 090356
COMBI 1010 With membrane IP66
• 10 side inputs with thread for cable ESKV 63 M63 34-48 Ref.: 090357
glands (5xM25/M32, 2xM20 and
3xM20/25) and 4 inputs in the
ground (2xM25/32 and 2xM20/25).
• 140Lx140Wx82Hmm. Interior threads for cable glands:
With cable gland up to IP68
M12 Ref.: 090360 M32 Ref.: 090364
Ref.: 090403
5 pole terminal block COMBI 108 - 308 Ref.: 090410 M16 Ref.: 090361 M40 Ref.: 090365
DIN-COMBI 308 rail Ref.: 090413 5 pole terminal block COMBI 607 Ref.: 090411 M20 Ref.: 090362 M50 Ref.: 090366
DIN-COMBI 607 rail Ref.: 090414 5 pole terminal block COMBI 1010 Ref.: 090412 M25 Ref.: 090363 M63 Ref.: 090367
321
CIGARETTE SOCKETS WATERPROOF PLUG CONNECTORS
IP65
Anti-corrosion material. Polycarbonate. Non-rusting.
Max. 24V up to 16A.
Anti-magnetic.
Seawater resistant.
Max. 16A.
DUAL USB CHARGER SOCKET USB EXTENSION CABLE DUAL USB FAST CHARGUER
Ref.: 032918
Ref.: 032913
Ref.: 032919
Protective dust cap. Conformal coated Control a stereo or other device Dual USB charguer, 4,8A.
circuit board for the harsh marine remotely from a phone or tablet Intelligent device recognition allows rapid charging
environment. 12/24V in the cockpit. 1,5m of phones, tablets, or other mobile devices.
322
SHORE POWER INLET - CEE TYPE
PVC. Waterproof.
IP56. 250V.
Shore Power
Max. 16A Ref.: 099858
323
MALE POWER PLUGS MALE POWER PLUGS POWER INLET
CEE TYPE CEE TYPE MARINCO TYPE
2 poles + Ground 2 poles + Ground
16A 32A
Plastic
Waterproof
Máx. 30A
324
ELECTRIC CORD REELS
• Always in place
• Organized
• Safe
325
RECTANGULAR CABLE GLAND ROUND CABLE GLANDS
Waterproof.
Stainless steel.
Stainless steel cable Ø base Ø
Ref.: 090423 9-20 80mm
PVC
Ref.: 090424 6-11 48mm
cable Ø base Ø
Ref.: 090430 Ref.: 090425 10-13 48mm
4-11mm 50mm
Cable glands
Ref.: 090399 137 77 30 48 Ref.: 291002 Ø21mm. Perfect for VHF antennas installation.
Ref.: 090398 121 55 16 22 Ref.: 291003 Ø35mm. Perfect for radar antennas installation.
326
DC ANALOG VOLTMETERS EUROPEAN
DIN 72mm.
White matte dial with black printed scale and knife-edge pointer.
Backlit meter face (separate 12 or 24V DC backlight connections).
Terminal cover included to prevent accidental short circuit.
Front dimensions: 72x72mm.
Meters
AC ANALOG AMMETER EUROPEAN
DIN 72mm.
White matte dial with black printed scale and knife-edge pointer.
Backlit meter face (separate 12 or 24V DC backlight connections).
Terminal cover included to prevent accidental short circuit.
Shunt included.
Front dimensions: 72x72mm.
DC ANALOG VOLTMETERS
Simple 4-wire connection.
Meter senses powers from same connection.
Backlit meter face (separate 12 or 24V DC backlight connections).
Face size: 2.75”.
Front dimensions: 61x71mm.
AC ANALOG VOLTMETER
Simple 2-wire connection.
Meter senses powers from same connection.
Backlit meter face (separate 12 or 24V DC backlight connections).
Face size: 2.75”.
Front dimensions: 61x71mm.
e g a uges
or ES
See m on GAUG 0-250V AC Ref.: 299354
ters
& me 327
DC ANALOG AMMETERS
Simple 4-wire connection.
Meter senses powers from same connection. Shunt included.
Backlit meter face (separate 12 or 24V DC backlight connections).
Face size: 2.75”.
Front dimensions: 61x71mm. Ref.: 298017 0-100A DC - EXTERNAL SHUNT
Ref.: 298005 0-25A DC - INTERNAL SHUNT Ref.: 298018 0-150A DC - EXTERNAL SHUNT
Ref.: 298022 0-50A DC - EXTERNAL SHUNT Ref.: 298019 0-200A DC - EXTERNAL SHUNT
AC ANALOG AMMETERS
Simple 2-wire connection. Meter senses and powers from coil slipped over wire to be measured.
Includes AC current transformer coil. Shunt included.
Backlit meter face (separate 12 or 24V DC backlight connections).
Face size: 2.75”.
Front dimensions: 61x71mm.
Ref.: 299630 0-50A AC - COIL INCLUDED
Ref.: 298258 0-100A AC - COIL INCLUDED
e g a uges
or ES
See m on GAUG
Ref.: 298246 0-50A AC
ters
& me
328
DC ANALOG AMMETERS ZERO CENTRE
Meters read both discharge and charge current.
Simple 4-wire connection.
Meter senses and powers from shunt connection.
Includes appropriate DC shunt.
Backlit meter face (separate 12 or 24V DC backlight connections).
Face size: 2.75”. 50-0-50A DC Ref.: 298252
Front dimensions: 60x67mm.
100-0-100A DC Ref.: 298253
DC DIGITAL VOLTMETER
Displays voltage from 0 to 60V DC, 0,01V increments.
3 levels of display brightness.
Splashproof front.
Manual sleep mode blanks display for power conservation.
Applicable for 12, 24, 32, 36, and 42V DC systems.
Front dimensions: 62x74mm.
Ref.: 298235
Meters
AC DIGITAL VOLTMETER
Displays voltage from 80 to 249V AC, 0,01V increments.
3 levels of display brightness.
Splashproof front.
Manual sleep mode blanks display for power conservation.
Front dimensions: 62x74mm.
Ref.: 298237
DC DIGITAL AMMETER
Displays amperage from -500 to +500A DC, 1A DC increments.
3 levels of display brightness.
Splashproof front.
Manual sleep mode blanks display for power conservation.
Standard meter operates in negative side of circuit only.
Shunt Shifter required for positive side installation such as alternators.
Includes 500A shunt.
Front dimensions: 62x74mm.
Ref.: 298236
AC DIGITAL AMMETER
Displays amperage from 0 to 150A AC.
3 levels of display brightness.
Current transformer coil included.
Splashproof front.
Manual sleep mode blanks display for power conservation.
Front dimensions: 62x74mm.
Ref.: 298248
Ref.: 291800
Ref.: 298255
s
auge S
Ref.: 298073 For 50A ammeters
o r e g E
See m on GAUG
Ref.: 298257 For 100A ammeters
m e ters
&
330
AC CURRENT TRANSFORMER COIL BATTERY TEMPERATURE SENSOR FOR VSM422
For use with digital AC ammeters up to 150 A.
TANK SENDER FOR VSM422 MONITOR TANK SENDER FOR VSM422 MONITOR
DIESEL/WATER/WASTE TANKS GASOLINE TANKS
Accurate, can be precisely calibrated for Accurate, can be precisely calibrated for each
each tank. For tanks up to 810mm depth. tank. For tanks up to 610mm depth. Without
Without moving parts. moving parts.
360 PANEL - FOR 1 ANALOG/DIGITAL 360 PANEL - FOR VSM422 360 PANEL - FOR GAUGE
VOLTMETER/AMMETER MULTI-MONITOR Designed to provide an easy method for
To mount analog indicators with 2.75” front 360 panel module to mount a VSM422 mounting gauges that provide critical functions.
and digital indicators. monitor. Heavy 1/8” aluminium 5052 alloy.
UV stabilized thermoplastic bezel.
Tank gauges includes
switch to monitor two
tanks.
Ø52mm.
Meters
Multi-monitor VSM422
Multimonitor VSM422
The Vessel Systems Monitor VSM22 is a
comprehensive monitor of four boat
systems in one compact meter saving
space and money.
- AC monitor
Voltage, current, frequency, Hi/Lo alarms.
3 display modes:
- Tank monitor
Up to 3 tanks: Levels, Hi/Lo alarms. Big text
Icons
- Bilge monitor
Multi-line text
Pump active, cycle count, duration, Hi/Lo alarms.
331
CAN BUS SWITCHING SYSTEM - POWERPLEX
Why E-T-A PowerPlex?
Growing demands regarding convenience and functionality on board require a new technology for a boat’s electrical system.
Achieving this performance range with today’s conventional technology generates a tremendous effort in wiring and mounting.
Most of the requested features like power management, alarm systems or supervision are independent systems. All these
features will be merged into the PowerPlex System. Your experience in combination with the E-T-A PowerPlex System and
E-T-A’s worldwide sales, engineering and service network will guarantee future success.
The E-T-A PowerPlex is a decentralized, user configurable power distribution system. It is optimized for marine applications
based on CAN-Bus technology (SAE J1939). Ease of configuration by means of the E-T-A configuration software running on a
standard Windows PC offers individual solutions for every boat. The E-T-A PowerPlex provides switching and controlling, timer
functions, real load status indication, overcurrent protection and wire break detection. Each function is individually programmable
to fit the requirements of the different loads.
The E-T-A PowerPlex offers a link between the look and feel
of conventional technology and modern digital processing
offering extensive diagnosis, monitoring and control functions.
The main benefit for the boat owner besides having a modern
electrical system is the integration of a lot of features like
alarm and remote control.
CAN BUS switching system
Easy to install
332
DC MODULES
CONTROL
ELEMENTS
333
TOO LOUD?
TOO BAD
Chrome brass.
Perfect sound quality.
Flat bracket.
To be installed with compressor.
KIT 4
Solenoid 24V Input pressure: 160 PSI/max.
4 horns 510, 445, 390 and 345mm.
Ref.: 215210 Sound level @150 PSI: 143,7db.
KIT 2
Solenoid 24V Ref.: 215211 Input pressure: 160 PSI/max.
Solenoid 12V Ref.: 215212 Sound level @150 PSI: 149,5db.
Horns
Chrome ABS.
To be installed with compressor.
KIT 3
Solenoid 24V Input pressure: 175 PSI/max.
Ref.: 215213 Sound level @150 PSI: 151,7db.
Complete kit with compressor, air tank, cab switch, pressure switch, safety valve,
compression fitting, drain cock, remote mount intake filter, mounting brackets & hardware.
334
“EMH” ELECTRONIC HORN
V IP dB Hz Dimensions
12 67 112 800 154x121x132mm Ref.: 215150
V IP dB Hz Dimensions
Horns
12 67 112 800 154x121x132mm Ref.: 215151
24 67 112 800 154x121x132mm Ref.: 215153
V IP dB Hz Dimensions
12 67 115 800 154x121x132mm Ref.: 215208
24 67 115 800 154x121x132mm Ref.: 215206
SPARE PARTS
335
“EW2” ELECTRONIC HORN
Approved. Boat lengths from 12 to 20m.
IMO: Class IV.
Speaker and electronic unit with 675Hz generator for manual signals.
Functions:
- Horn.
- Automatic fog signal.
V A dB Hz Dimensions
Ref.: 215147 24 1,5 122 675 249x237mm
V A dB Hz Dimensions
Ref.: 215209 24 1,5 122 675 249x237mm
336
“PW2-BB” HORN AND COMPRESSOR KITS
Spare
V A dB Hz Dimensions compressor
12 20 123 315 460xØ200mm Ref.: 215155 Ref.: 215148
24 10 123 315 460xØ200mm Ref.: 215156 Ref.: 215145
Spare
membrane
Ref.: 215149
Horns
Spare
V A dB Hz Dimensions membrane
24 2,5 132 315 460xØ300mm Ref.: 215158 Ref.: 215149
“M3” COMPRESSORS
V Bar Kg W Dimensions
12 8 9 380 380x175x368mm Ref.: 215162
24 8 9 380 380x175x368mm Ref.: 215160
337
SINGLE HORN AND COMPRESSOR KITS TWIN HORN AND COMPRESSOR KITS
V A dB Hz Length
V A dB Hz Length
Ref.: 215135 12 18 117 228 500mm
Ref.: 215137 12 26 111 177/218 610mm
Ref.: 215136 24 9 117 228 500mm
Ref.: 215138 24 13 111 177/218 610mm
Electropneumatic single horn for boats. Non-corrosive materials.
High quality chrome brass trumpet, complete with compressor, Twin tone air horn with high quality chrome brass trumpets,
fixing hardware and relay. complete with electric compressor, relay and mounting
hardware. Powerful and harmonious sound.
Electropneumatic
horn with reduced
dimensions but with
high sound output.
Complete with electric
compressor, relay and
mounting hardware.
V A dB Hz Length V A dB Hz Length
Ref.: 215142 12 16 116 420 250mm Ref.: 215144 12 5 114 350 250mm
Ref.: 215143 24 8 116 420 250mm Ref.: 215146 24 2,5 114 350 250mm
V A dB Hz Length V A dB Hz Length
Ref.: 215105 12 8 117 340/390 500mm Ref.: 215103 12 4 115 340 430mm
Ref.: 215102 24 4 117 340/390 500mm Ref.: 215104 24 2 115 340 430mm
338
ELECTROMAGNETIC SINGLE HORNS
Stainless steel
AISI 304 stainless steel trumpet and bracket.
AISI 301 stainless steel membrane.
New support design with integrated cable.
Complete with fixing hardware.
V A dB Hz Length
12 6 112 340 470mm Ref.: 215106
24 3 112 340 470mm Ref.: 215107
12 6 120 370 400mm Ref.: 215108
24 3 120 370 400mm Ref.: 215109
12 5 114 570 250mm Ref.: 215110
Horns
Ref.: 215121 Front Depth mm
ACCESSORIES
Ref.: 215199 Electronic unit for Ref.: 215207 Electronic horn Ref.: 215152 Compressor M2R 12V
EW-3-24V control panel
Ref.: 215164 Compressor M2R 24V
339
“W12” WATERPROOF
Heavy-duty motor, 12 Nm.
Various sweep angle: 45º, 60º, 80º and 110º.
Self-parking changeable in left or right position (right by default).
Two speeds: slow 35 sweep/min and fast 55 sweep/min.
Stainless steel drive shaft and bracket.
White powder lacquered body.
Insulated ground for metal, plastic and wooden boats.
CE approved. EMC protected.
IP65.
L1 L2
mm mm 12V 24V
16 42 Ref.: 090554 Ref.: 090576 Bracket to make W12
motors fit to W10
41 64 Ref.: 090557 Ref.: 090555 mounting holes.
66 90 Ref.: 090569 Ref.: 090556 Ref.: 090559
“W10” STANDARD
Heavy-duty motor, 10 Nm.
Various sweep angle: 45º, 60º, 80º and 110º.
Self-parking changeable in left or right position (right by default).
Two speeds: slow 35 sweep/min and fast 55 sweep/min.
Solid brass nickel plated knurled drive nut with bearing in brass
nickel plated and stainless steel drive shaft. Mounting bracket and
Windscreen wipers
Shaft L.
12V 24V mm
Ref.: 090503 38
Ref.: 090502 65 Motor protection cover
Ref.: 090506 Ref.: 090507 90 Ref.: 090505
340
ARMS FOR “W10” AND “W12”
ROCA STANDARD
Stainless steel. 310-410mm
Black anti glare paint. Ref.: 090514
Bracket type II. 480-610mm Ref.: 090515
Type I Type II
Windscreen wipers
SPRAY JET KIT
Includes spray jet and 1100mm hose. Pantograph Adjustable tip
Arm
Ref.: 090692
SPEICH
Polished stainless steel.
Bracket type I. 550mm Ref.: 090551
WIPER BLADES
Wiper blade made in Zinc plated steel and anti glare painting. Natural rubber profile with stainless steel backer, including two adaptors to
fit wiper arms with brackets type I and II.
341
“W5” KIT Spare blade
Ref.: 090538 305mm
White powder lacquered cover.
Shaft and mounting plate in stainless steel (AISI 304). Ref.: 090539 330mm
Adjustable self parking in right or left position (left by default). Ref.: 090540 355mm
Adjustable sweep angle: 90º or 110º.
Spare shaft
Ref.: 090511 Ø6mm
Ref.: 090510 Motor, arm and Ref.: 090509 Adaptor for ROCA
blade Type II arms
“W25”
Heavy-duty motor, 25Nm, made for the toughest conditions.
Stainless steel drive shaft.
Arms and blades up to 750mm.
Adjustable sweep angle from 45 to 110mm.
CE approved. EMC protected.
2 speeds: Slow 35 sweep/min and fast 55 sweep/min.
Windscreen wipers
Shaft L.
12V 24V (mm)
Ref.: 090485 Ref.: 090488 28
Ref.: 090486 Ref.: 090489 53
Pantographs Arms L (mm) Colour Ref.: 090487 Ref.: 090490 78
Ref.: 090596 Ref.: 090483 470-750 Electropolished
Ref.: 090597 Ref.: 090484 470-750 Black
L
12V 24V mm.
Ref.: 090580 Ref.: 090583 38
Ref.: 090581 Ref.: 090584 64
Ref.: 090582 Ref.: 090585 90
342
“W50” DUAL DRIVE
Shaft L.
12V 24V (mm)
Ref.: 090494 Ref.: 090497 40
Ref.: 090495 Ref.: 090498 65
Ref.: 090496 Ref.: 090499 90
Dimensions Model
Pantograph
Electropolished Ref.: 090579 470-750mm W38/W50
Windscreen wipers
Black Ref.: 090578 470-750mm W38/W50
Electropolished Ref.: 090553 600-900mm W38/W50
Black Ref.: 090552 600-900mm W38/W50
Saddle width 16mm.
Electropolished Ref.: 090588 1020-1200mm W50 600-900mm models includes spray nozzle
Black Ref.: 090589 1020-1200mm W50 with 1100mm hose.
W10/W12 W25/W38
Spare actuator
Ref.: 090697 Ref.: 090123 Without light Ref.: 090191 LED 12V
Ref.: 090142
Ref.: 090125 LED 12V Ref.: 090192 LED 24V Ref.:090142- *
* PVC finish
343
PROFESSIONAL WINDSCREEN WIPER SYSTEMS “TYPE M” - 220V
MOTOR
Designed to be used on medium sized windscreen wipers installed on
work boats for civil and military applications.
Adjustable sweep angle from 45º to 90º, 5º intervals.
Dynamic parking, can be changed, left or right.
Starting power: 220W - Rated power: 55W - Starting torque: 45Nm.
One speed: 90 sweep/min.
For arms and pantographs up to 900mm and blades up to 800mm.
Voltage: 220V.
Max. thickness
bulkhead
Ref.: 090730 30 mm
Ref.: 090731 60 mm
Ref.: 090732 100 mm
Ref.: 090733 130 mm
RIGID BLADES
Windscreen wipers
PENDULUM ARMS
Stainless steel bracket.
Length mm. Polished 316 stainless steel.
PANTOGRAPH ARMS
On request we can supply this motor in 12, 24 VDC and 110 VAC.
344
INGRESS PROTECTIONS ACCORDING TO IEC 60529
345
WIPER MOTORS “223BS”
346
WIPER MOTOR “280BS”
Windscreen wipers
Torque: 55Nm.
347
HEAVY DUTY WIPER MOTORS “233BD”
Ref.: 090900
Ref.: 090901 Type E arm
24V - 2 shafts 500-600mm
The Exalto KW wiper system is custom-made, so in almost every situation the perfect solution can be offered. With one wiper
a maximum of four arms can be driven. Main advantage of this wiper system is that the arms are easily adjustable in length.
The arms have a swivelling blade clip, so in self-parking position the blade can be set parallel to the edge of the glass. The
type E wiper arms are specially designed for the Exalto KW wiper systems. We advise you to use the Exalto H.D. blades.
Features:
Easy to mount. Insulated earth return. Noiseless. Self-parking. Two speeds. Available for bulkhead thicknesses 20, 35, 55, 75,
100 and 125mm. Stainless steel shafts, bolts and nuts. Self-lubricating bronze bearings. Maximum wiping angle 100°. Three
types: for two, three or four pendulum arms. Arms up to 600mm and blades up to 700mm.
348
PANTOGRAPHS
Windscreen wipers
Supplied with double spring and spring pressure adjustment.
ARM
Stainless steel, brass attachment heads, black coating.
Pendulum arm.
600-700mm Ref.: 090619
BLADES
HEAVY-DUTY
349
STRAIGHT LINE WIPERS
Designed specifically for heavy duty applications either in naval or nautical sector.
Straight line wipers are especially suited for very large window areas.
An ideal installation is obtained on windows with a base length of at least 1.5 times
the window height.
Includes:
Control panel with intermittent variable adjustment, one speed and wiper.
With stroke limit switch and spray jets.
Can be equipped with single or twin arms.
For twin arms, distance between them is 500mm.
12, 24V DC
Available voltages
110, 220V AC
Wipe speed: 1,2m/s
350
CLEAR VIEW SCREENS
Clear view screen is a high technology product. Many decades of field experience
and constant technical improvements have made the Clear view screen extremely
reliable and durable even under the severe environment conditions. Keeps a glass
disk free from rain, snow or sea-water by fast rotation. The motor is placed in the
centre and is fastened to the fixed glass so as to obtain the largest possible field
of vision. The rotating glass is hardened and optically rectified to avoid any optical
distortion. All metal parts are made of brass; a specially designed manifold between
the ring surrounding the rotating glass and the fixed frame keeps water from entering
the space between the fixed and rotating glass.
Windscreen wipers
WIPER ACCESSORIES
Ref.: 090679 Tank 8L pump 12V Ref.: 090698 Tank 8L with 2 pumps 24V Ref.: 090683 Spray Jet bulkhead max. 50mm
Ref.: 090680 Tank 8L pump 24V
Ref.: 090681 Tee 4x6mm Ref.: 090682 Elbow Ref.: 090684 Straight tube conn. Ref.: 090693 Tank 3L with pump 12V
4x6mm 4x6mm
1/8” male thread Ref.: 090694 Tank 3L with pump 24V
Ref.: 090685 Straight tube conn. Ref.: 090686 Straight tube conn. Ref.: 090687 Elbow conn. Ref.: 090662 Tank VDO 4L with
4x6mm 4x6mm 4x6mm pump 12V
1/4” male thread 1/2” male thread
Ref.: 090688 Straight tube conn. Ref.: 090689 Straight tube conn. Ref.: 090690 Straight tube conn.
4x6mm 1/8” female thread 4x6mm 1/4” female thread 4x6mm 1/2” female thread
351
WIPER ACCESSORIES
Ref.: 090650 Spray jet for Ref.: 090593 Solenoid 12V Ref.: 090595 Thru-hull 85mm Ref.: 090664 Spray jet P10/P12 type
PU type tube 4x6 left
Ref.: 090594 Solenoid 24V
pantographs
Ref.: 090691 Spray jet P10/P12 type
right
Ref.: 090651 Straight conn. Ref.: 090660 Spray jet plastic Ref.: 090676 Thru-hull 110mm
1/8”x6mm thread bulkhead stainless steel tube 4x6
Windscreen wipers
Ref.: 090652 Tee 4x6mm Ref.: 090665 Spray jet P10/P12 type Ref.: 090677 Thru-hull 60mm Ref.: 055001 Defogger 12V
plastic tube 4x6
Ref.: 090699 Spray jet PU type
Ref.: 090653 Thru-hull 4x6mm Ref.: 090661 Tee int. 4mm Ref.: 090659 Non-return valve tube 4x6mm
Ref.: 090667 Thru-hull elbow tube 4x6mm. Ref.: 090654 Tube 4x6mm (per metre) Ref.: 090670 Tubing retainer strip 700mm
Ref.: 090678 Tube 4x6mm flexible (per metre)
352
ELECTRONIC WIPER SWITCHES
These switches offer two speeds and self-parking controls with separate
connections for pumps or solenoids.
V Speeds Motors
*These switches incorporates an
12/24 2 1 Ref.: 090641
adjustable intermittent wipe,
12/24 2 2 Ref.: 090642
two speeds and self-parking
12 2 1 Ref.: 090643
control, and has a separate 12 3 1 Ref.: 090644 *
connection for a pump or solenoid. 24 3 1 Ref.: 090645 *
Panel for combination switch Ref.: 090646
Wiper controls
3 motors/W10/12 Ref.: 090508 Slow/Parking 1 wiper Ref.: 090647
Dimensions: 50x25mm.
3 motors/W25/38 Ref.: 090590 Fast/Slow/Parking 2 wipers Ref.: 090649
353
GENERATORS
Specifically designed and manufactured for installation onboard boats. The IS (intercooler system) diesel generators assure
shipbuilders and end users easy installations with high efficiency and performance. Designed for the special demands of the
marine environment. Feature low sound levels and very low emissions.
Model IS 2,6
Frequency (Hz) 50
Voltage (V) 115-230
Max. AC output (Kw) 2
Cont. AC output (Kw) 1,7
Motor (4 strokes)
Displacement (Nr) 1
Displacement (c.c.) 219
Max. power (hp) 4,2
IS 2,6
RPM 3000
Max. consumption 0,7
Model IS 8,1
Frequency (Hz) 60
Voltage (V) 120-240
Max. AC output (Kw) 7,8
Generators
Model IS 14
Frequency (Hz) 60
Voltage (V) 120-240
Max. AC output (Kw) 13,5
Cont. AC output (Kw) 12,3
Motor (4 strokes)
Displacement (Nr) 3
Displacement (c.c.) 1642
Max. power (hp) 22,2
RPM 1800
IS 14 Max. consumption 4
354
SERIES 20 USCG IMO RINA MCA GL A-16 IP45
Length W Visibility
Black housing White housing
<12m 5 1nm Ref.: 210001- Ref.: 210011- Starboard
STERN
12V
BA9S bulb
Length W Visibility
Navigation lights
Black housing White housing
<12m 5 2nm Ref.: 210004 Ref.: 210014 Masthead
ALL-ROUND, PEDESTAL
12V
BA9S bulb
Length W Visibility
Black housing White housing
<20m 5 2nm Ref.: 210005 Ref.: 210015
All-round
All-round
ALL-ROUND
12V or 24V
FESTOON bulb SV8,5-8 L42
12V or 24V
FESTOON bulb concave ends and
BA9S
All-round white with bracket Plug-in Ref.: 210788 <20m 1 2nm 1108
and mast.
4x1,5V
Ref.: 210033
Length W Visibility
White housing
<50m 1,5 2nm Ref.: 210711 Starboard
STERN LED
12/24V
Length W Visibility
Black housing White housing
<20m 4,5 3nm Ref.: 210703 Masthead
Navigation lights
<20m 4,5 2nm Ref.: 210730 Ref.: 210731 Tri-colour
<20m 4,5 3nm Masthead with
Ref.: 210718 Quicfits
ALL-ROUND LED
12/24V
Length W Visibility
Black housing White housing
<50m 1,5 2nm Ref.: 210715 All-round
BI-COLOUR LED
12/24V
Length W Visibility
Black housing
<20m 3 2nm Ref.: 210709 Bi-colour
MASTHEAD/ANCHOR LED
12/24V
Length W Visibility
Black housing White housing
<20m 4/1,5 3/2nm Ref.: 210734 Ref.: 210735 Masthead/Anchor
357
IP67 BSH IMO GL SERIES 34 LED
STARBOARD, PORT, STERN LED Stainless steel housing available (see on page 341).
12/24V
Black housing White housing Length W Visibility
BI-COLOUR LED
12/24V
ALL-ROUND LED
12/24V
Black housing White housing Length W Visibility
358
SERIES 40 USCG IMO GL A-16 IP56
Length W Visibility
Black housing
<50m 25 2nm Ref.: 210231 Starboard
Navigation lights
<20m 25 2nm Ref.: 210212 Tri-colour
ALL-ROUND, HOISTABLE
12V or 24V
BAY-15d bulb
TRI-COLOUR, QUICFITS
12V or 24V
BAY-15d bulb
TRI-COLOUR/ANCHOR, QUICFITS
12V or 24V
BAY-15d bulb
ANCHOR/STROBE, QUICFITS
12/24V
Length W Visibility
Black housing
ANCHOR/TRI-COLOUR/STROBE, QUICFITS
Length V W Visibility
Black housing
<20m 12 25/10/8 2/3nm
Navigation lights
STROBE, QUICFITS
12/24V
Strobe bulb
Request a quote
360
SERIES 41 USCG IMO A-16 IP56
ulbs
Spare b 399
96-
pages 3
STARBOARD, PORT, MASTHEAD, STERN, BI-COLOUR AND TOWING
12V or 24V
BAY-15d bulb
2 BAY-15d bulbs
Navigation lights
50W
361
IP56 USCG IMO SERIES 50 SS
ALL-ROUND
12V or 24V
BAY-15d bulb
Navigation lights
BAY-15d bulb
Steering light blue Ref.: 210509 >20m/<50m 25 2nm B22 bulb socket
for narrow waterways
or passing canals.
ulbs
Spare b 399
96-
pages 3
362
IP56 CCS USCG BSH IMO SERIES 70
P28S bulb
Navigation lights
135º
Suez Stern Red Ref.: 210620 ≥20m 40 3nm Not approved.
P28S bulb
ulbs
Spare b 399
96-
pages 3
363
SERIES 65 LED - DOUBLE
IP67 IP66 USCG IMO
≥20m 3nm Ref.: 210675 Ref.: 210659 Ref.: 210653 Stern yellow
Navigation lights
Signal- and navigation lights for the commercial shipping, based on innovative LED technology.
364
SERIES 20 AND 30 PLUG-IN BASES SERIES 25 BRACKETS
Navigation lights
4 Mast Ref.: 210428 Ref.: 210326 Ref.: 210428
5 Pulpit Ref.: 210429 Ref.: 210327 Ref.: 210429 SERIES 40
6 Surface 90º Ref.: 210255 white lens
Bracket to make Ref.: 210451
7 Mast top - starboard Ref.: 210245 SERIES 43 fit to
- port Ref.: 210246 SERIES 41 and 50
Tri-colour/anchor
mounting brackets
SERIES 40 lens
Bulb holders Ref.: 210424 Ref.: 210214
BAY15D Bulb holder
with base BAY15D Cable gland Nuts Quicfits bases
Stainless steel base
SERIES 40 SERIES 40
Ref.: 210280 Ref.: 210281 SERIES 40
For any light
SERIES 50 with this bulb. SERIES 40 SERIES 50 SS SERIES 50 SS Generation I Generation II
Ref.: 210480 Ref.: 210282 Ref.: 210283 Ref.: 210481 Ref.: 210482 Ref.: 210220 Ref.: 210230
SERIES 55 SERIES 70
Halyard hooks Side bracket Back bracket Cover P28S bulb holder Bulb holder base
Ref.: 210597 Ref.: 210598 Ref.: 210599 Ref.: 210483 Ref.: 210285 Ref.: 210286
365
Ref.: 034811
12-24V
Ref.: 034806
Ref.: 034812
120-230V
Communications
module
Ref.: 034809 12-24V
Ref.: 034807
Control
Ref.: 034813
module 120-230V
Ref.: 034810
366
IP66
DHR 40 LED
STARBOARD, PORT, MASTHEAD, STERN, TOWING AND ALL-ROUND
24V - 1 LED module
IP66
DHR 60 LED
Length W Visibility
Navigation lights
Black housing
IP66
DHR 80 LED
367
IP56 COLREG IMO SERIES 35
STARBOARD, PORT, MASTHEAD, STERN, TOWING AND ALL-ROUND
12V or 24V
ulbs
Spare b 399
3 9 6-
pages
368
SERIES 70 IP56 COLREG IMO
Navigation lights
ACCESSORIES AND SPARE PARTS FOR DHR NAVIGATION LIGHTS
Top cover
Ref.: 210924
P28S
bulb holder
Brackets Ref.: 210980
Conversion set BAY15D
Ref.: 210964 Starboard for bracket bulb holder
Ref.: 210934 Ref.: 210282 Bulbholder bridge
Ref.: 210965 Port
with bulb holder P28S
Ref.: 210966 Masthead Conversion set for Ref.: 210981
or Stern hoisting
Ref.: 210935 Green lens Red lens
Ref.: 210919 Ref.: 210920
White lens Yellow lens
BAY15D Ref.: 210921 Ref.: 210922
bulb holder Yellow lens
Stern lens
Ref.: 210282 Ref.: 210525
Ref.: 210624
ulbs
Spare b 399
96-
pages 3
369
RINA IMO IP56
UTILITY 77
12V or 24V FESTOON SV8,5-8 bulb L:31mm
Length W Visibility Ø L
ALL-ROUND MAXI
12V or 24V
BA15D bulb
Navigation lights
Length W Visibility Ø L
MAXI
12V or 24V
FESTOON SV8,5-8 bulb L:42mm
Length W Visibility
SS CASE
<20m 15 2nm Ref.: 213106 Starboard
Dimensions: Ø67mm.
Height: 75mm.
Stainless steel.
12 or 24V. Ref.: 215012
W V Housing
FESTOON SV8,5-8 bulb
L:31mm Ref.: 210809 2,2 12 SS
W V Housing L
Ref.: 210810 PEDESTAL 1,7 12/24 Black 148mm Ref.: 210804 1,2 12 SS
A B C D W V L
BI-COLOUR BI-COLOUR
Horizontal mount Vertical mount
STERN STERN
Horizontal mount Vertical mount
Navigation lights
MASTHEAD/ANCHOR MASTHEAD
Horizontal mount Vertical mount
TRI-COLOUR TRI-COLOUR/ANCHOR
Horizontal mount Horizontal mount
MASTHEAD/DECK
Vertical mount
373
Silver Aluminium Black Aluminium
STARBOARD PORT
Horizontal mount Horizontal mount
BI-COLOUR BI-COLOUR
Horizontal mount Vertical mount
STERN STERN
Horizontal mount Vertical mount
Navigation lights
MASTHEAD TOWING
Vertical mount Horizontal mount
MASTHEAD/ANCHOR TRI-COLOUR
Horizontal mount Horizontal mount
Dimensions Visibility V W
Dimensions Visibility V W Aluminium
Ø92x44mm 2 nm 10-32 3,6
Ref.: 218014 Ø92x44mm 2/3 nm 10-32 4,2/3,3 Silver
Ref.: 218414 Ø92x44mm 2/3 nm 10-32 2,7/1,8 Black Ref.: 218015
MASTHEAD/DECK TRI-COLOUR/ANCHOR
Horizontal mount Horizontal mount
374
Silver Aluminium Black Aluminium
STARBOARD PORT
Horizontal mount Horizontal mount
STERN STERN
Horizontal mount Vertical mount
TOWING MASTHEAD
Horizontal mount Horizontal mount
Navigation lights
Dimensions Visibility V W
Dimensions Visibility V W Aluminium
Ø92x141mm 5 nm 10-32 7
Ø92x28mm 2 nm 10-32 1,9 Silver Ref.: 218010
Ø92x28mm 2 nm 10-32 1,8 Black Ref.: 218410 Ref.: 218007
ALL-ROUND ALL-ROUND
Horizontal mount Horizontal mount
95x56x28mm 1,8 Ref.: 218024 Ref.: 218424 10-32V Ø92x28mm 3,2 Ref.: 218012 Ref.: 218412
Visibility 2nm 10-32V
95x56x28mm 2,3 Ref.: 218025 Ref.: 218425 Ø92x28mm 4,4 Ref.: 218013 Ref.: 218413 Visibility 2nm
375
Silver Aluminium Black Aluminium
The Lopolight products are unique based innovative use of LED’s (Light MASTHEAD DOUBLE
Emitting Diodes) and very effective and sophisticated power electronics that Horizontal mount
delivers low power consumption and extremely long lifetime even in the
harshest conditions.
In addition all lights are completely sealed to allow submersion. Dimensions Visibility V W
Ø92x130mm 5 nm 10-32 14,5
Navigation lights
Ref.: 218139
Dimensions Visibility V W Aluminium
Ref.: 218021 Ø92x28mm 4 nm 10-32 4,4 Silver
Ref.: 218421 Ø92x28mm 4 nm 10-32 4,4 Black
ALL-ROUND
WHITE STROBE Horizontal mount
Horizontal mount
Dimensions Visibility V W
Dimensions Visibility V W Aluminium
Ref.: 218040 Ø92x50mm 2 nm 10-32 1,7
Ref.: 218141 Ø92x63mm 3 nm 10-32 2 Silver
Ref.: 218041 Ø92x50mm 2 nm 10-32 1,7
376
Silver Aluminium Black Aluminium
STARBOARD PORT
Horizontal mount Horizontal mount
Navigation lights
STERN ALL-ROUND
Horizontal mount Horizontal mount
STERN TOWING
Vertical mount Vertical mount
377
ALEX RODI 2
CHROME
KING EROS
Satin glass.
12 or 24V - 10W max.
G4 bulb (not included).
WHITE
WHITE Ref.: 216165
Ref.: 216142
MATT CHROME Ref.: 216167
Lighting
MAGIC BORSEALIS
Satin glass.
12 or 24V - 10W max. 12 or 24V - 20W max.
G4 bulb (not included). G4 bulb (not included).
ulbs
Spare b 399
96-
pages 3
378
GALAN
Colour V W WHITE CHROME
Warm white 10/33V 2,5W Ref.: 217740 Ref.: 217742
Day white 10/33V 2,5W Ref.: 217741 Ref.: 217743
Warm w./Red 12V 2,5W Ref.: 217763 Ref.: 217765
Warm w./Red 24V 2,5W Ref.: 217764 Ref.: 217766
Rings
WHITE
Ref.: 212003 AMBER Ref.: 210841
Lighting
TYRESO 70 ROUND TYRESO 70 SQUARE
LED 12/24V - 1W
IP53. Spacer ring
Warm white. for surface
Without switch With switch mounting LED 12/24V - 1W
IP53. STAINLESS STEEL Ref.: 217506
STAINLESS STEEL Ref.: 217501 Ref.: 217502
Warm white.
WHITE Ref.: 217503 Ref.: 217504 Ref.: 217505 WHITE Ref.: 217507
12 or 24V.
10-30V
10W max.
5W
G4 bulb
Warm
(not incl.)
white
12V 24V
WHITE Ref.: 217030 Ref.: 217032
SS CHROME Ref.: 217031 Ref.: 217033
Ref.: 216400 WHITE Ref.: 217034 17LED+1Blue
MATT SATIN
CHROME CHROME CHROME
Ref.: 216196 Ref.: 212065 Ref.: 212043
CHIOS DAVID
Satin glass.
12 or 24V - 10W max. 12 or 24V - 20W max.
G4 bulb (not included). G4 bulb (not included).
WHITE
Ref.: 212041
CHROME Ref.: 216105
WHITE Ref.: 216106
MATT C. Ref.: 216108
} Red light
Lighting
ARES JOHN LED
IP65 IP65
STAINLESS STEEL
COOL WHITE Ref.: 216190 STAINLESS STEEL
WARM WHITE Ref.: 216191 Ref.: 216281
JOHN WALTER
IP65 IP65
Satin glass.
12 or 24V - 20W max.
G4 bulb (not included).
MATT CHROME
Ref.: 216095
WHITE
Ref.: 216153
ORLANDO ROGER
Anti-glare
Red light
SS Ref.: 216117 MATT CHROME
WHITE Ref.: 216118 Ref.: 216171
Lighting
ASIA 1 OCEAN
IP65
Satin glass.
12 or 24V - 10W max.
12 or 24V - 20W max.
G4 bulb (not included).
G4 bulb (not included).
12 or 24V.
10W max.
G4 bulb
(not included).
CHROME
Ref.: 212045
CALIPSO SERIFOS
12 or 24V. 12 or 24V.
20W max. 10W max.
G4 bulb G4 bulb
(not included). (not included).
CHROME CHROME
Ref.: 214565 Ref.: 212042
Lighting
AQUARIUS DIANA LED
IP65 IP65
PIANORE
IP65
383
JENY
Satin glass.
12 or 24V - 10W max.
G4 bulb (not included).
WITHOUT SWITCH
TECNO LED
IP65
10V or 30V
5W
VIAREGGIO
Satin glass.
12 or 24V - 20W max.
G4 bulb (not included).
Spacer ring
for surface
Without switch With switch mounting
BA9S bulb.
Lighting
SUSY SUSY LED
IP65
GOLD
Ref.: 216035 87
IP40
50
STAINLESS STEEL Ø87 Ref.: 216298
IP65 Ref.: 216056 Ø105 Ref.: 216410
105
CHEN FARO Q
CHROME
COOL WHITE Ref.: 217697 Ref.: 216182
WARM WHITE Ref.: 217698
ulbs
Spare b 399
96-
pages 3
385
FERUSA MAREA
IP65
WHITE
Ref.: 211016
GOLD
CHROME
Ref.: 211025
Lighting
Ref.: 211017
FARO
Ref.: 211308
CEILING LIGHT
IP65
ulbs
Spare b 399
9 6-
pages 3
386
CHIP
Lighting
STAINLESS STEEL Ref.: 211305 Ref.: 211307
VEGA TITAN
IP65 IP65
BUND LED
Cut out
ulbs
Spare b 399
96-
pages 3
387
COLOMBO UFO
Satin glass.
LED dome light. 12 or 24V - 20W max.
Satin diffuser. G4 bulb (not included).
12V - 2W max. With switch.
White and red light
in the same fixture.
Surface mount.
Ø140x28mm
Switch:
Ref.: 211056 WHITE PLASTIC ON-OFF-ON GOLD
Ref.: 211057 STAINLESS STEEL Ref.: 216040
Satin glass.
Satin glass.
12 or 24V - 20W max.
12 or 24V - 20W max.
G4 bulb (not included).
G4 bulb (not included).
WITHOUT SWITCH
GOLD Ref.: 216019
SS Ref.: 216007
STAINLESS STEEL
Ref.: 216053 WHITE Ref.: 216008
Satin glass.
12 or 24V.
20W max.
G4 bulb
(not included).
With switch.
GOLD
Ref.: 216038
EUDORA NESEA
IP65 IP65
Lighting
OCEANO CEILING LIGHT
IP65
12 or 24V - 20W max. Stainless steel housing.
G4 bulb (not included). With opening button.
MONO DUO
LED 10/30V.
LED 10-30V - 3W. 2x3W.
Warm white. Warm white.
STAINLESS STEEL
STAINLESS STEEL Ref.: 216286
Ref.: 216287
ulbs
Spare b 399
96-
pages 3
389
SYDNEY ARDORA LED CEILING LIGHTS
IP67
TC2G7 bulb - 9W High output ceiling
light. White plastic ring
with satin polycarbonate
diffuser. Aluminium
white housing.
BRASS STAINLESS STEEL
V W Ext. Ø Height
Ref.: 211521 12V
COOL WHITE Ref.: 217696 10/30 13 150mm 22mm
Ref.: 211522 Ref.: 211523 24V
Ref.: 211527 24 and 220V (double circuit) COOL WHITE Ref.: 217694 10/30 20 210mm 22mm
IP66
Surface mounting
390
RAIL
CALVI
Lighting
GUNNER CEILING LIGHTS
10 / 30 V
DAY WHITE.
Dimensions: 411 x 38mm
Without With
switch switch Dimensions
10 / 30 V
Day white. Ref.: 217755 Ref.: 217756 300x145
Ref.: 217757 Ref.: 217758 450x145
Ref.: 217759 Ref.: 217760 600x145
VIGO
CHROME GOLD
12V Ref.: 211506 Ref.: 211507
24V Ref.: 211508 Ref.: 211509
Exclusive design wall light. Four mounting options.
Chrome-plated or gold-plated polycarbonate housing and white shade. With switch. BA15S bulb - 15W max.
VIP
CHROME GOLD
Ref.: 216371 Ref.: 216369 LEFT
Ref.: 216372 Ref.: 216370 RIGHT
CLEO
12/24V - 20W max.
B15d bulb (not included).
Lighting
TIME PATTY
NUBIA
ulbs
Spare b 399
96-
pages 3
392
PIER APOLLO
DORADO DORADO
Ref.: 216380 Ref.: 216304
MIKE
12 or 24V - 10W max.
G4 bulb (not included). With switch.
OMEGA SKY
Lighting
12 or 24V - 10W max.
G4 bulb (not included).
With switch.
CHROME Ref.: 216321
GOLD Ref.: 216322 CHROME Ref.: 216300
DANY
12V
White-blue light CHROME Ref.: 216315
8 leds white + 1 led blue
GOLDEN Ref.: 216316
3 positions
GOLD
Ref.: 216344
POLISHED STAINLESS STEEL Ref.: 217529
ulbs
Spare b 399
96-
pages 3
393
850 LED 521 LED
With switch.
10-30V
With switch.
3 LED - 4W
197x32x35mm Ref.: 217054 5 LED 11 LED
146x32x35mm 242x32x35mm
6 LED - 7W 12V 24V 12V 24V
339x32x35mm Ref.: 217056 CHROME CHROME
Ref.: 217039 Ref.: 217043 Ref.: 217047
9 LED - 10W GOLD
482x32x35mm Ref.: 217058
Ref.: 217042
Length V Leds
CHROME
Ref.: 212010
STAINLESS STEEL CHROME
GOLD
Ref.: 216377 Ref.: 216343
Ref.: 212011
CIRCE LIFE
12 or 24V - 25W max.
12 or 24/110 or 230V. B15d bulb (not included).
25W max. Lampshade not included.
E14 bulb (not included).
Lampshade included.
CHROME CHROME
Ref.: 216373 Ref.: 216374
DELTA
PUMA
Lighting
CHROME Ref.: 216334
ONDINE
Lampshades
WHITE/GOLD Ref.: 216328 12 or 24V - 40W max.
WHITE/CHROME Ref.: 216329 B15d bulb (not included). Lampshade not included.
Aluminium.
LED 12V - 2W Chrome.
With switch. 2W
Warm white.
Surface mount.
Arm length 400mm.
12V 24V
Ref.: 217050 Ref.: 217052 CHROME
GOLD Ref.: 216319
Ref.: 217051 Ref.: 217053 GOLD
MATT CHROME Ref.: 216320
CHROME
Ref.: 212066 Ref.: 211515
ulbs
Spare b 399
96-
pages 3
396
TOUCHLED CHART LIGHTS
LED 10-30V
Mod. F26 With touch sensor switch.
LED turns ON (red light) when the light
is OFF to know the lamp position.
Mod. F4
BLACK Ref.: 217005 Ref.: 217004 F4 BLACK Ref.: 217000 Ref.: 217003 F4
BLACK Ref.: 217073 F26 BLACK Ref.: 217036 Ref.: 217044 F26
FLEX TORONTO
12 or 24V - 10W max.
G4 bulb (not included). Black polycarbonate.
With dimmer and switch.
12 or 24V - 5W max.
Lighting
BA9S bulb
LED 12-24V
10W.
CHROME Suitable for outdoors.
Ref.: 213201 Includes base with lid.
CHROME
LED 12-24V - 6W.
Suitable for outdoors. Ref.: 213202
Includes base with lid.
ulbs
Spare b 399
9 6-
pages 3
397
SPILLO LED VICOS
IP65 IP65
12/24V - 0,24W.
Stainless steel ring.
LED 10-30V
0,4W
SS LED COLOUR
12 or 24V - 0,24W.
Surface mount.
4 x LED 0,5W.
STAINLESS STEEL
BLACK Ref.: 215004 Ref.: 212091
Lighting
557 COURTESY LIGHTS 551 COURTESY LIGHTS
IP65
Plastic housing.
Plastic housing. Surface mount.
Surface mount. 6 LED bar.
WHITE LIGHT
12V 24V
3 LEDs Ref.: 217770 Ref.: 217771
6 LEDs Ref.: 217774 Ref.: 217775
BLUE LIGHT
12V 24V
ulbs
Spare b 399
96-
pages 3
399
LEON LEO
MATT
WARM WHITE CHROME
Ref.: 216267 Ref.: 216214
24V
10-30V
GOLD
BLUE LIGHT RED LIGHT
Ref.: 216206
Lighting
SABARÍS NAUTILUS
IP65
12 or 24V - 5W max.
FESTOON SV7 bulb 12 or 24V - 10W max.
(not included). FESTOON SV8,5 bulb
(not included).
CHROME
Ref.: 212021
CHROME
GOLD
Ref.: 212022 Ref.: 212061
TORNADO
12 or 24V - 3W max.
W2x4,6D bulb
(not included).
GOLD
Ref.: 216202
ulbs
Spare b 399
3 9 6-
pages
400
BERMUDA NASSAU
Plastic housing.
2 LED - 12V < 0,1A
Dimensions: L37xA18xF11mm.
12V - 8W
Plastic housing and diffuser.
Dimensions: L81xA64xF19mm.
RONDETTO
IP65
12 or 24V - 2W max.
W2x4,6D bulb
(not included).
GOLD
Ref.: 216210
Lighting
GOSTOSA ARGENTA
IP65
Stainless steel.
Satin glass. 110 or 230V
Bulb not included. 25W max.
Satin glass.
E14 bulb
(not included).
401
SEA LED
UNDERWATER LIGHTS
Certified
Through hull light to be fitted on the bottom/bilge shell of classed yachts, below the water line, in order to obtain a scenic sea view around the
vessel. It is intended to grant the same watertightness of the vessel’s shell. Tested to be watertight, fully submerged, up to 1.6 bar pressure. Can
be installed up to 10 metres (33 ft) under the water line. Can be applied on every kind of vessel as it is released in three different materials:
aluminium 5083, for aluminium hulls, stainless steel (AISI 316) for steel or non-metallic vessels and a special version of SEA LED fits a special
engineering thermoplastic (PPS) frame that grants an extreme mechanical resistance and avoids any need of corrosion protection for the
external part of the lamp. “Luminaire class F ” marked (CEI-EN 60598). Can normally operate in open air with an environmental temperature
up to 50°C, thus there is no need to implement measures to prevent overheating even when the lamp is not fully submerged in water.
The highest led technology specifically designed for yacht. Built-in driver with temperature control for a better power management.
Low power consumption for an high power efficiency. Long life operation up to 30.000 hours. EMC & CE marine compliant. Extractable
lighting core, replacement of the lighting core also while the hull is immersed. Low operating temperature working lamp, also out of
the water. IP68. Fully waterproof. Beam visible up to 12 metres (big model).
Ref.: 216527
Ref.: 216528 316 SS 1x40W 160mm 109mm 145mm 120mm
Ref.: 216529 316 SS 2x40W 160mm 109mm 145mm 120mm
Ref.: 216530 316 SS 1x13W 75mm 56mm 105mm 80,5mm *24V - Blue
B A
D
Ref.: 216535 Converter for 12V installation C
402
BEFORE
THEY WERE ONLY FOR MEGAYACHTS
Lighting
ZHUHAI 6x1 ROUND UNDERWATER LIGHTS
752 753
With switch Without switch With switch Without switch
12V Ref.: 217082 Ref.: 217083
24V Ref.: 217088 Ref.: 217089
Lighting
611 - 65
RESOLUX 611 / 612
612 - 120
15
20
Flicker-free pre-heat-soft start.
611 - 55 Recognition of technical faults,
612 - 110 automatic shut-down of lamp.
Sturdy plastic ABS housing.
Length: 360mm.
Macrolon diffuser with prism structure.
With switch.
SPARE TUBE 611 612
TL-8W
1xTL-8W 2xTL-8W
Ref.: 219017
12V Ref.: 217100 Ref.: 217102
24V Ref.: 217103
24V LED Ref.: 217074
4 150
RESOLUX 767 / 768 / 776
29
Flicker-free pre-heat-soft start.
125 Recognition of technical faults, automatic
shut-down of lamp.
Length 767: 410mm
768: 635mm Die-cast aluminium body, powder coated with
776: 965mm rounded ABS end cap. Polycarbonate diffuser
SPARE TUBE
with prism structure, very impact resistant.
TL-8W
Ref.: 219017 767 768 776
TL-13W 2xTL-8W 2xTL-13W 2xT5-21W
Ref.: 219115 12V Ref.: 217106 Ref.: 217108
T5-21W 24V Ref.: 217107 Ref.: 217109 Ref.: 217110
Ref.: 219116
404
RESOLUX 650 SPRAYWATER-PROOF
IP65
TL tube 8W.
Flicker-free pre-heat-soft start.
Recognition of technical faults, automatic shut-down of lamp.
Sturdy ABS housing with all-round aluminium sealing frame powder coated.
Macrolon clear diffuser with prism structure.
Without switch.
Dimensions: 410x95x35mm.
LED
SPARE TUBE
TL-8W DAY WHITE
Ref.: 219017 24V Ref.: 217075 24V Ref.: 217071
SHANGAI
With switch.
2x8W - 12V TL tubes. Day white.
Dimensions: 395x85x30mm.
BEIJIN
White plastic.
TC-S Energy Saving Fluorescent Lamp
11W.
3 position switch.
Dimensions: 295x64x33mm.
12V Ref.: 215017
24V Ref.: 215019
Lighting
LED LUMINAIRE
658 163
24V Ref.: 217078
ANTIBES
SPARE TUBE Galvanised steel plate and white plastic housing. 12V Ref.: 211401
Sliding switch integrated in diffuser, vibration-
Ref.: 219017 24V Ref.: 211402
proof. TL fluorescent tube 8W.
MALAGA
Seawater resistant aluminium housing.
TL fluorescent tube 8W.
Black or brown caps.
BRASS CHROME
12V Ref.: 211403 Ref.: 211405
405
MALTA
BRONZE
Ref.: 211420 TL fluorescent tubes
12V
2x8W
SPARE TUBE
Ref.: 219017
TORNADO - IP65
BALLAST
36 Ref.: 221098
SS clip
{ 18 Ref.: 221099 EMERGENCY ELECTRONIC
ELECTROMAGNETIC
Ref.: 221001 2x18
Ref.: 221020 Ref.: 221012 Ref.: 221002 1x36
H1
Ref.: 221021 Ref.: 221013 Ref.: 221003 2x36
406
MULTIPURPOSE LUMINAIRES 1044 - IP67
Applicable for a wide range of different areas,
e.g. accommodation and public areas, wardrobes,
workshops, engine rooms, stores, galleys, etc.
According to the rules of maritime classification
societies, additional VDE and IEC/EN.
Zinc coated steel seamless housing. White painted.
Clear polycarbonate diffuser.
2x18/20W tube.
1448 - IP67
Applicable for a wide range of different areas,
e.g. accommodation and public areas, wardrobes,
workshops, engine rooms, stores, passage ways,
etc. Designed to meet maritime requirements.
Lighting
Zinc white powder coated steel housing with
polycarbonate diffuser.
Spare T5 tube.
pages bulbs 24V - 2x8W
396-3
99
Ref.: 220060
The innovative LED outdoor lighting fixtures are applicable for a wide range of different areas, e.g. workshops, engine rooms, stores,
passage ways etc. They are designed to meet maritime requirements and to save energie and maintanance cost due to extream long
lifetime. Technical LED luminaire, in Aluminium seawater resistant, IP66/67 , light source LED 2x10W, Lumen Output: 2221, ballast
type High frequency, Standard aqua signal, cable entry 2xM25-Polyamide, with light source type CRI>80, 4000K, optic type Opal,
Ref.: 220071
407
SIGNALLING LIGHTS
Suez signalling lights are designed in different colours for
all general warning purposes. Black Pocan housing and
polycarbonate diffuser.
E27 bulb (not included). 12, 24, 110 or 230V - 60W max. IP67
Ref.: 210630 White
Ref.: 210631 Red Spare diffusers
The beacon has even and continuous and very strong light in a horizontal
Lighting
408
KIEL LED
HAMBURG LED
IP67
10-30V LED - 5W.
Impact and shock resistant, non-corrosive,
non-magnetic and seawater resistant housing.
Direct on spreader or wall- mast- mount, with
optional stainless steel bracket.
BRISTOL
IP67. 10-30V - 10W.
Seawater resistant aluminium, powder coated,
non-corrosive and non-magnetic white housing.
Lighting
Flexible mounting, with adjustable bracket or
directly on surface.
1,5m connection cable.
Inverse polarity protection. EMC tested.
Self-regulating temperature management.
Ref.: 211051
BERGEN
Ref.: 211052
MONTEREY
IP67. 12V - 50W
MR-16 halogen bulb.
Plastic white, watertight, impact and shock
resistant, UV protected, non-corrosive,
non-magnetic housing. Flush mount.
Sold in pairs.
Ref.: 214016
409
KIEL
Impact and shock resistant, non-corrosive,
non-magnetic and seawater resistant housing.
Flexible mast-mounting.
12V - 50W halogen / 24V - 50W
HAMBURG
Impact and shock resistant, non-corrosive,
non-magnetic and seawater resistant housing.
Direct on spreader or wall- mast- mount, with
optional stainless steel bracket. IP67.
12V - 50W halogen.
24V - 50W.
Black housing White housing
SPARE BULBS, same as KIEL
12V Ref.: 214001 Ref.: 214004
Stainless steel bracket
24V Ref.: 214002 Ref.: 214005 Ref.: 214003
BREMEN
Rubber black, impact and BRACKETS
shock resistant, non-corrosive,
Lighting
FLOODLIGHT/SPOTLIGHT
SPARE BULBS
H3-12V-55W Ref.: 219022 H3-24V-70W Ref.: 219023
410
LED “FL60” FLOODLIGHTS
Beam
Beam
Ref.: 214050 Narrow
Ref.: 214053 Narrow
Ref.: 214051 Medium
Ref.: 214054 Medium
Ref.: 214052 Wide
Ref.: 214055 Wide
IP66/67
Designed for a long lifetime and high efficiency. LED gives instant light
and is immune against voltage drops. The special design of seawater
resistant aluminium anodised module housing secures an excellent cooling.
Mounting frame and bracket are made of stainless steel.
According to rules of maritime
classification societies, additional
VDE and IEC/EN.
230V - 160W
230V - 120W
Lighting
Beam
Beam
Ref.: 214056 Narrow
Ref.: 214059 Narrow
Ref.: 214057 Medium
Ref.: 214060 Medium
Ref.: 214058 Wide
Ref.: 214061 Wide
411
APOLLO LED FLOODLIGHT
Aluminium-magnesium corrosion resistant, black
powder coated housing.
Stainless steel bracket and screws. IP67.
Luminous flux: 8700lm.
412
SHENZEN LED FLOODLIGHT
LED FLOODLIGHT
Lighting
Light colour LED nº V W Angle
413
YINLONG LED BARLIGHT
12/24/220V
Deep drawn seamless 316 stainless steel housing.
White epoxy powder coated.
Polished anodised aluminium reflector.
Bulb not included.
Bulb holder type RX7S.
Bulb 1000W max.
Spare glass
Ref.: 220030 Ref.: 220029
Lighting
12/24/220V
Deep drawn seamless 316 stainless steel housing.
White epoxy powder coated.
Polished anodised aluminium reflector.
Bulb not included.
Bulb holder type R7S.
Bulb 500W max.
Spare glass
Ref.: 220011 Ref.: 220025
414
SL REMOTE CONTROL FLOODLIGHT
Corrosion resistant materials. White housing. Halogen bulb. 4,5m cable included. 320º
horizontal and 75º vertical rotation. Panel included.
Ref.: 030252 12V 100 (x2) 130 165x220x230 120 Spare bulb
Ref.: 030254 24V 100 (x2) 130 165x220x230 120 Ref.: 219095
Lighting
REMOTE CONTROL FLOODLIGHT
415
150CB
Cabin control.
316 stainless steel housing.
Corrosion resistant and non-magnetic materials.
Stainless steel hardware. Chrome plated handle.
SPARE BULBS
V W cd
Ref.: 033011 12 100 200.000 12V Ref.: 219039
Ref.: 033012 24 250 300.000 24V Ref.: 219040
180DS
Deck operated.
316 stainless steel housing.
Corrosion resistant and non-magnetic materials.
Stainless steel hardware.
SPARE BULBS
V W cd
Ref.: 033021 12 100 225.000 12V Ref.: 219041
220DS
Deck operated.
Chrome seawater resistant aluminium case.
Searchlights
V W cd
Ref.: 033042 12 100 131.000 SPARE BULB:
same as 220 CB
Ref.: 033043 24 250 441.000
220CB
Cabin control.
Grey epoxy powder coated marine aluminium case.
Stainless steel hardware.
Solid brass polished handle.
V W cd
SPARE BULBS
Ref.: 033041 12 100 131.000
12V Ref.: 219030
Ref.: 033040 24 250 441.000
Ref.: 033045 220 250 120.000 24V Ref.: 219031
260DS
Deck operated.
Chrome seawater resistant aluminium case.
UV-resistant white powder coating.
Corrosion resistant and non-magnetic materials.
Stainless steel hardware.
V W cd
416
350RC - REMOTE CONTROL
W V cd Reflector Ø
Ref.: 033047 250 24 820.000 340mm
Ref.: 033035 1000 230 1.220.000 340mm
350DS
Deck operated.
Chrome seawater resistant aluminium housing.
UV-resistant white powder coating finish.
Searchlights
Corrosion resistant and non-magnetic materials.
Optics: hardened glass. Parabolic mirror reflector Ø340mm.
Column Ø 90 x 800 mm.
IP66 with membrane vent.
SPARE BULBS
24V - 250W 220V - 1000W 24V 220V
Ref.: 033033 Ref.: 033034 Ref.: 219031 Ref.: 219071
350CS
Cabin control.
Chrome seawater resistant aluminium housing.
UV-resistant white powder coating finish.
Corrosion resistant and non-magnetic materials.
Optics: hardened glass. Parabolic mirror reflector Ø340mm.
Column Ø 90 x 800 mm. 24V - 250W
IP66 with membrane vent.. 820.000cd
Ref.: 033030
SPARE BULBS
With special
220V - 1000W
24V 220V dimensions column
1.220.000cd
Ref.: 219031 Ref.: 219071 Ref.: 033032 Ref.: 033031
260RCN
D-260RCN024 The DHR260 Metal Halide searchlight is the
most powerful and has the longest range of 1800 meters.
The housing comes with a silver plated parabolic mirror with
adjustable focus giving it superb optics.
Ref.: 033048
24V/250W+PANEL
417
G4 HORIZONTAL 12 LEDs G4 HORIZONTAL 3 LEDs x 1,5W G4 HORIZONTAL 15 LEDs
2,2W
30 41,5
Light color V
Ref.: 219229 Day white 12 12V - 4,5W 10/30V - 2,8W
Ref.: 219234 Day white 10-30
Ref.: 219134 Cold white 12 Ref.: 219260 Warm white
Ref.: 219417 Warm white
Ref.: 219235 Cold white 10-30 Ref.: 219261 Cool white
Ref.: 219174 Warm white Ref.: 219170 Warm white Ref.: 219149 Day white
Ref.: 219175 Cool white Ref.: 219171 Cool white Ref.: 219150 Cool white
0,48W 0,48W
418
G4 HALOGEN G4 XELOGEN CLEAR G4 XELOGEN SATIN
Xelogen Xelogen
low-pressure low-pressure
V W technology. technology.
12 10 Ref.: 219024
14 10 Ref.: 219117
14 20 Ref.: 219118
4 V W V W
24 10 Ref.: 219085 12 10 Ref.: 219100 12 10 Ref.: 219104
28 20 Ref.: 219046 12 20 Ref.: 219101 12 20 Ref.: 219105
28 10 Ref.: 219106
12 12
36
36
12V - 1,2W 12V - 1,3W
12V - 1W
Warm white Ref.: 219401 Warm white Ref.: 219403 4 faces.
Cold white Ref.: 219402 Cold white Ref.: 219404
Amber Ref.: 219422 Amber Ref.: 219423 Cool white Ref.: 219191
FESTOON SV8,5 1 LED x 1,5W FESTOON SV8,5 LED FESTOON SV8,5 9 LEDs
10/30V - 2W
42 12
Bulbs
12V - 1,3W
Warm white Ref.: 219405 6 LEDS Warm white Ref.: 219196
12V AC/DC - 1,5W
Cool white Ref.: 219406 6 LEDS Cool white Ref.: 219408
Warm white Ref.: 219262 Warm white Ref: 219194- 3 LEDS Green Ref.: 219217
Cool white Ref.: 219263 Amber Ref.: 219424 Red Ref.: 219216
6 LEDS
10/30V - 3,6W
V W V W
419
BAY15d 15 LEDs FESTOON CONCAVE ENDS FESTOON CONCAVE ENDS
30 LEDS
10-30V
5 faces.
Colour V V W
Ref.: 219206 Warm white 10-30 Ref.: 219018 12 21
Ref.: 219206- Warm white 12 Ref.: 219019 24 21
Ref.: 219412- Cool white 12 Ref.: 219411 Warm white
Ref.: 219412 Cold white Ref.: 219093 230 40
V W
V W
Ref.: 219049 12 1,2
Ref.: 219097 12 10
Ref.: 219001 12 5
3W - Beam angle: 340º. 12 21
Ref.: 219063 Ref.: 219004 12 20
Ref.: 219258 Warm white Ref.: 219099 24 10
Ref.: 219050 24 2
Ref.: 219259 Cool white Ref.: 219064 24 21
Ref.: 219056 24 5
V W
12VDC - 1,5W - Beam angle: 340º Ref.: 219082 24 25
Ref.: 219254 Warm white Ref.: 219413 Warm white Ref.: 219084 220 25
Ref.: 219255 Cool white Ref.: 219414 Cold white
420
B22 48LEDs H3 P28S
5W
SMD2835
V W V W
V Color
6 55 Ref.: 219033 24 40 Ref.: 219058
10-36 Warm white Ref.: 219274
12 50 Ref.: 219022 115 60 Ref.: 219057
230 Warm white Ref.: 219276
Ref.: 219277 24 70 Ref.: 219023 220 65 Ref.: 219059
230 Cold white
P28S GY6,35
6,35
V W L (mm)
12 100 63 Ref.: 219067
24 200 63 Ref.: 219251 V W V W
24 200 118 Ref.: 219068 24 40 Ref.: 219058 12 100 Ref.: 219030
220 200 78 Ref.: 219253 115 60 Ref.: 219057 24 250 Ref.: 219031
220 200 118 Ref.: 219069 220 65 Ref.: 219059 220 300 Ref.: 219032
Bulbs
V W
12 3 Ref.: 219047
24 3 Ref.: 219048 V W
12 5 Ref.: 219061 12 2 Ref.: 219087 V W
24 5 Ref.: 219062 24 1,2 Ref.: 219088 220 1000 Ref.: 219071
PAR G9 HALOPIN
Type V W Ø Beam angle
PAR 36 12 50 115 80º Ref.: 219009
PAR 36 24 50 115 80º Ref.: 219010
PAR 36 12 50 115 7º Ref.: 219011
PAR 36 24 50 115 11º Ref.: 219012
PAR 36 12 100 115 19º Ref.: 219250
V W
PAR 36 24 250 115 19º Ref.: 219035
220 25 Ref.: 219043
PAR 46 12 100 144 11º Ref.: 219039
220 40 Ref.: 219098
PAR 46 24 250 144 11º Ref.: 219040 Ø
PAR 56 12 100 177 9º Ref.: 219041
PAR 56 24 170 177 9º Ref.: 219042
421
E27 / E14 35 LEDs E27 E27 FILAMENT LED
6,5W Warm white
6,5W
230V
Light Colour V Socket
Ref.: 219270
Ref.: 219218 Warm white 24 E27 V W
Ref.: 219219 Cool white 24 E27 Ref.: 219055 12 25
Warm white
Ref.: 219222 Cool white 230 E27 Ref.: 219051 12 40 3W
Ref.: 219212 Warm white 12 E14 Ref.: 219052 24 40 230V
Ref.: 219213 Cool white 12 E14 Ref.: 219054 24 60 Ref.: 219271
Warm white
230V - 9W
V W 3W
Ref.: 219269 Warm white Ref.: 219119 12 25 Espheric 230V
Ref.: 219268 Day white Ref.: 219094 12 10 Tubular Ref.: 219272 Ref.: 219273
Light colour V
Ref.: 219136 Warm white 12
Ref.: 219140 Warm white - 5W - 10/36VDC V W
Ref.: 219135 Day white 12
Ref.: 219081 24 20
Model W L Ø
Ref.: 219017 G5 8 288 16
422
LAMP 2G 11 LED STRIP
IP LEDs Light colour V L
L 65 24 Warm white 24 510 Ref.: 215046
65 24 Cool white 24 510 Ref.: 215045
65 24 Blue 24 510 Ref.: 215049
W L 65 24 Red 24 510 Ref.: 215071
Ref.: 219113 24 315 65 24 Green 24 510 Ref.: 215072
Ref.: 219114 36 410 20 30 Warm white 12 480 Ref.: 215047 *
Ref.: 219036 55 535 20 30 Cool white 12 480 Ref.: 215066 *
20 30 Blue 12 480 Ref.: 215069 *
20 30 Red 12 480 Ref.: 215067 *
LAMP 2G 7 20 30 Green 12 480 Ref.: 215068 *
11W 20 30 RGB 12 480 Ref.: 215070 *
65 30 Warm white 12 570 Ref.: 215073
65 30 RGB 12 570 Ref.: 215074
65 30 Day white 12 570 Ref.: 215053
References with * can be cut with 50mm legth
Ref.: 219159 Warm white
Ref.: 219252 Cool white
Interior and exterior general lighting. Decorative effects and courtesy lighting.
Emergency and emergency exit signalling. Easy to hide. 3M self-adhesive tape
included. Low power consumption.
215
2,9
Blue 0,34/m 12
2,5
12
16
Ref.: 215057 Day white 1,2/m 12
Ref.: 215058 Cool white 1,2/m 12
50 Ref.: 215054 Warm white 0,6/m 24
cut segment
Ref.: 215044 Day white 0,6/m 24
Ref.: 215023 Cool white 0,6/m 24
0,20
2
423
190 35 60
LED STRIPS IP65 18 U/M SMD3528
9
Light colour A V 185
Cut section
Red 0,34/m 12 Ref.: 215086
2,5
Suitable for night lighting on wheelhouses.
Light colour A V 10
50
Warm white 0,34/m 12 Ref.: 215026 Cut section
Cool white 0,34/m 12 Ref.: 215025
Red 0,34/m 12 Ref.: 215027
3,6
Green 0,34/m 12 Ref.: 215028
Blue 0,34/m 12 Ref.: 215029
100
Light colour A V Cut section
Light colour A V
16
12
Warm white 1,2/m 12 Ref.: 215022
Day white 1,2/m 12 Ref.: 215021 50
Cut section
Cool white 1,2/m 12 Ref.: 215024
Warm white 0,6/m 24 Ref.: 215048
3,6
Cut section
50mm
Light colour A V
15mm
Light colour A V
424
12
16
LED STRIPS RGB IP21 30 U/M SMD5060
High brightness chips.
100
fracción de corte Light colour A V
12
16
LED STRIPS RGB IP65 30 U/M SMD5060
High brightness chips.
100
fracción de corte
Light colour A V
3,6
14 15 14 15 18,5
12
Profile Ref.: 219393 Profile Ref.: 219390 Profile Ref.: 219398 Profile Ref.: 219392
Cover Ref.: 219394 Cover Ref.: 219391 Cover Ref.: 219394 Cover Ref.: 219391
End cap Ref.: 219395 End cap Ref.: 219396 End cap Ref.: 219399 End cap Ref.: 219397
425
DIMMER DECKHAND DIMMERS
For 12 or 24V non-regulated LEDs,
halogen and incandescent lights.
LED control. Illuminated exit with adjustable time delay.
12/24V - max. 100W Fits multiple switches.
With rotary switch-regulator (ON)-OFF-(ON) momentary or double
and 10m cableset. push buttons.
Control: modulation Memory for last setting.
by impulses (PWM). Control: modulation by impulses (PWM)
Dimensions controller: from 0 to 100% of input voltage.
65x40x15mm Dimensions: 83x90mm. 12V 24V
Dimensions knob: 55x55mm 6A max. Ref.: 297506 Ref.: 297504
Compatible with bezels, page 278.
Full kit Ref.: 217601 12A max. Ref.: 297507 Ref.: 297509
25A max. Ref.: 297508
DIMMERS
For LEDS “CLL CH1” For LEDS “MDM700”
Dimensions:
56x75x30mm.
426
RGB CONTROLLER ELECTRONIC DIMMER ROTARY SWITCH
Dimmers
24V - 4A Ref.: 091197
WATERPROOF TRANSFORMERS
Designed to get maximum LED efficiency and long-lasting.
Input Output W Dimensions IP
Reduced dimensions.
240 12 15 218x29x20 67 Ref.: 700501 Ideal for exterior and interior mounting.
240 12 30 218x29x20 66 Ref.: 214517
240 24 30 218x29x20 66 Ref.: 214519
240 12 60 190x50x35 67 Ref.: 214518
240 24 60 200x67x49 67 Ref.: 214520
240 12 200 245x69x43 67 Ref.: 214521
240 24 200 245x69x43 67 Ref.: 214522
427
STEREO 2212
This stereo has a waterproof controller (IPX6) and a separate water resistant amplifier/tuner
unit. In this way you can install the controller even in areas with limited space.
The separate unit can be mounted up to 2.7 metres away from the controller.
- 200W (4x50W)
- AM/FM tuner.
- USB input supports MP3 or WMA files.
- AUX input.
- Full iPod, iPad or iPhone control with cable Ref.: 020045 (not included).
- Warning signal at low battery voltage.
- Zero current memory draw.
- Sealed PCB.
Ref.: 020020
Controller/display dimensions: 131x94x26mm.
Micro-processor dimensions: 205x210x50mm.
12V DC
Ref.: 020017
40W by channel
IP65
428
REMOTE CONTROL FOR 2212
These remote controls can be used in all exterior applications and can be easily mounted
in any convenient location. They are waterproof (IPX6) and can be exposed to UV and salt
water. With the JWR200 stereo functions are shown on a sunlight readable LCD display. Both
remotes have blue button illumination and are CE certified. Installation is easy by means of
a spin-on retaining ring. 5.5 meters connection cable included. The JWR200 is only suitable
for the JMS serie. JWR200.
Øext.: 90mm - Øcut out: 70mm - Depth: 32mm
Audio
circuit that safeguards against short circuits, DC-offset and thermal overload. 4 channels.
Max. power: 760W.
Dimensions: 318x229x64mm.
Ref.: 020025
SUBWOOFER SUBWOOFER
The waterproof (IPX6) non-amplified subwoofer is made of Water resistant (IPX5). It meets
corrosion and UV resistant materials the ASTM standards for salt
according to the ASTM standards: an spray exposure and for UV
aluminium chassis with silver powder exposure. It has conformal
coating finish. coated circuit boards.
The subwoofer can be mounted with or
Horizontal or vertical mount.
without the ABS grille (cover).
Dimensions: 406x220x100mm.
Max.: 200W.
Ext. Ø: 254mm.
Cut Ø: 228,6mm.
Max.: 300W. Ref.: 020035 Ref.: 020026
SPEAKER SPEAKERS
These coaxial, waterproof
speakers are available in black 2-way speakers (bass and treble separately).
and white. The one-piece-design UV and salt spray protected. The speaker
speakers are made of UV resistant has a one-piece-moulded chassis and a 10oz
plastic to resist fading from magnet. Available in stylish silver, bold black
the sun and the speakers are or clear white. Sold per unit.
corrosion resistant. 10oz magnet. Ext. Ø: 165mm.
Sold per unit. Cut Ø:130mm.
Depth: 59mm. Chrome Ref.: 020031
Ext. Ø: 165mm.
Cut Ø:130mm. 60W Black Ref.: 020032
Depth: 60mm. White Ref.: 020030 White Ref.: 020033
60W
429
SPEAKERS
The MSX series exceed every expectation sound-wise. UV and salt spray protected
according to ASTM standards. 11oz magnet. Sold in pairs.
Max. output power: 130W (2x65W) or 150W (2x75W).
Dimensiones ext.:
Ref.: 020048 Negra 245x110mm
Ref.: 700024
Ref.: 020049 Blanca Ref.: 020039
The waterproof storage pocket protects your music player from shocks and water.
To install the 2212 stereo on the cover.
Front: 170x148x18,5mm
Cut hole: 150x106,5x45mm.
Audio
Ref.: 020042
Ref.: 020043
AM/FM ANTENNAS
Easy to mount.
Ref.: 020046 Rubber mast antenna. 1,5m cable.
Ref.: 020047 Amplified antenna for interior (not suitable aluminium vessels).
2m cable.
430
VHF ANTENNA
VHF antenna.
Length: 1,5m.
Fibre antenna. Plastic swivel.
4,5m cable.
Gain: 3,5dB.
Ref.: 900102
VHF ANTENNA
Antennas
ANTENNA FIXED BRACKET
25 316 stainless steel
Ref.: 125110
25
Ref.: 125111
Low profile.
431
ELECTRIC OUTBOARD MOTORS - FRESH/SALT WATER
V Consum. Max. power (W) Shaft Length Weight Colour Model
12 30A 360 750mm 6,6kg Black 33 TG Ref.: 025050 Only for freshwater.
12 42A 504 850mm 8,8kg White F45 TGS Ref.: 025051
12 45A 540 850mm 9,2kg White F55 TGS Ref.: 025052
12 42A 504 650mm 8,8kg White F45 TGS-SL Ref.: 025053
12 45A 540 650mm 9,2kg White F55 TGS-SL Ref.: 025054
AUTONOMY:
BATTERY GAUGE
SPARE PARTS
PROTECTION:
UV RESISTANT CASE.
PCB.
Electric motors
Switch Mod. 33/45/55 Brush kit E-ring Bushing Ball bearing Seal set
Ref.: 025068 Ref.: 025069 Ref.: 025070 Ref.: 025064 Ref.: 025065 Ref.: 025062 Ref.: 025063
Stainless steel.
For most under 25CV outboard motors.
Ref.: 060025
MOTOR FLUSHERS
432
FRONT MOUNT HELM PUMPS
Compact design.
Ball bearing piston race.
Built-in lock valve for positive rudder lock.
Integral relief valve for over-pressure protection.
1
/4”NPT connections for 3/8” hose.
3
/4” tapered stainless steel shaft.
Easily accessible lock valve and shaft seal for replacement.
Cast iron rotor for greater durability and longer life.
132 mm ø 154 mm
X64 X57
Square Round
Ref.: 185053 Ref.: 185054
ø 115 mm ø 115 mm
Hydraulic Steering
REAR MOUNT HELM PUMPS
Compact design.
Ball bearing piston race. Model c.c./rev. Piston nº
Built-in lock valve for positive rudder lock. Bezel
Ref.: 185005 UP28 R 28 5
Integral relief valve for over-pressure protection.
Ref.: 185080
1
/4”NPT connections for 3/8” hose.
Ref.: 185006 UP33 R 33 7 Service kit
3
/4” tapered stainless steel shaft.
Easily accessible lock valve and shaft seal for Ref.: 185045
Ref.: 185004 UP39 R 39 7
replacement.
Cast iron rotor for greater durability and longer life. Remote fill adaptor
Ref.: 185011 UP47 R 47 7 KIT F Ref.: 185055
White bezel included.
433
UP20 HELM PUMP
Built-in lock valve for positive rudder lock.
Integral relief valve for over-pressure protection.
1
/4”NPT connections for 3/8” hose.
3
/4” tapered anodised aluminium shaft.
Corrosion proof composite housing.
Easy accessible lock valve and shaft seal for replacement.
X52 tilt
mechanism
Ref.: 180409
Pump
Ref.: 185068
Compact design.
Model c.c./rev. Piston nº Bar Ball bearing piston race.
Built-in lock valve for positive rudder lock.
Ref.: 185008 UP28 T 28 5 70 Integral relief valve for over-pressure protection.
1
/4”NPT connections for 3/8” hose.
Stainless steel shaft.
Easily accessible lock valve and shaft seal for replacement.
Cast iron rotor for greater durability and longer life.
Hydraulic Steering
Pump cap
Ref.: 185044
434
REAR MOUNT HELM PUMP FOR 12MM HOSE
Compact design.
Ball bearing piston race.
Remote fill adaptor
Built-in lock valve for positive rudder lock.
Integral relief valve for over-pressure protection. KIT F Ref.: 185055
1
/4”NPT connections for 12mm hose.
3
/4” tapered stainless steel shaft.
Easily accessible lock valve and shaft seal for replacement. Model c.c./rev. Piston nº Bar
Cast iron cylinder rotor for greater durability and longer life. Ref.: 185012 UP45-I R 45 7 70
White bezel included.
Hydraulic Steering
Easily accessible lock valve and shaft seal for replacement Ref.: 185091 UP68 68 7 70
Brass rotor for greater durability and longer life.
Installation kits not included.
Ref.: 185094
Remote fill adaptor UP56/68
Permits to install the UP56 and Permits to install the UP56 and
UP68 pumps in a rear mount UP68 pumps in an intermediate Ref.: 185095
position. Includes chrome plated mount position. Relief valve 70Bar
cover ring. For over-pressure protection.
435
INBOARD CYLINDERS
UC69-I
A B C D E F G Dimensions (mm)
Connections /8”
3 3
/8” 3
/8” 3
/8”
436
INBOARD CYLINDERS
A B C D E F G Ø Dimensions (mm)
Hydraulic Steering
300 260 212 749 183 70 110 25 UC442-I Ref.: 185099
250 218 178 723 168 120 104 30 UC530-I Ref.: 185101
Ref.: 185029 Ref.: 185098 Ref.: 185034 Ref.: 185099 Ref.: 185101
Specifications UC293-I UC339-I UC378-I UC442-I UC530-I
Brass Brass Brass Brass Brass
437
ENGINES FOR UC81 CYLINDER
60-70 2S 1984-2008
75C-90 2S 1998-2008
115C 2S 1990-2008
F40G-F70 4S 2010-to date
Yamaha F30-F40-F60-F75-F80 EFI 4S 1999-2007
F90-F100-F115 EFI 4S 1999-2007
F80-F100 4S 2000-to date
F115 2004-to date
F40D-F50F-F60C EFI 4S
40XS-50 Madeira 2S
40XS-50 Bull shark 2S
40XS-60 Grey shark 2S
Hydraulic Steering
BJ60-70 4S 2001-2007
Johnson BJ90-115 4S 2001-2007
J90-115 V4 2S 1995-2007
*Suzuki engines built from 1998 to 2008 installing UC81-OBF cylinder require the kit KIT
SU - 41954W ordered separately.
438
UC81-OBF FRONT MOUNT OUTBOARD CYLINDER
Ref.: 185082
Specifications:
- Volume: 81cc
- Output force: 222kg
- Inside Ø: 27,4mm Balanced: the number of turns lock-to-lock is
- Stroke: 186mm equal port to starboard or vice-versa.
- Connections: 3/8”.
77,2
574
Hydraulic Steering
Dimensions (mm)
Depending on the applications on the outboard engine, the UC81-OBF can be installed port or starboard.
APPLICATIONS
1 engine-1 cylinder
Up to 115hp max.
1/4” hose Ref.: 180069 1/4” hose terminals Ref.: 180070
439
ENGINES FOR UC94-OBF CYLINDERS
Engines Model Year Cylinder
A B C
1 engine 540mm 152mm 152mm
440
UC94-OBF FRONT MOUNT OUTBOARD CYLINDERS
Specifications:
- Volume: 94cc
- Output force: 255kg Balanced: the number of turns lock-to-lock
- Inside Ø: 30mm is equal port to starboard or vice-versa.
- Stroke: 186mm
- Connections: 3/8”.
Service kit Ref.: 185046
78
Hydraulic Steering
546
Dimensions (mm).
Depending on the applications on the outboard engines, the UC94-OBF cylinder is available in 2 versions.
APPLICATIONS
Ref.: 185027 Ref.: 185028
1 engine-1 cylinder
Up to 150 hp. max.
UC94-OBF/1 UC94-OBF/3
441
ENGINES FOR UC128-OBF CYLINDERS
Engine Model Year Cylinder Standard Port SVS SVS Port
*Suzuki engines built from 1998 to 2008 installing UC128-OBF/1 cylinder require optional KIT SU - 41954W.
A B C
Adjustable boss style fittings for
1 engine 560mm 152mm 152mm easy installation.
For twin engine applications minimum engine High resistance stainless steel
centre distance is 550mm (21.6”). 2 engines 1110mm 152mm 152mm connection bolt (ULTRABOLT).
442
UC128 FRONT MOUNT OUTBOARD CYLINDERS
SVS
STANDARD HIGH PERFORMANCE
Specifications:
- Volume: 120cc
- Output force: 450kg
- Inside Ø: 35mm
- Stroke: 185mm
- Connections: 3/8”.
PORT SVS
HIGH PERFORMANCE
In the applications with dual UC128-
OBF cylinder it is necessary to order a
standard UC128-OBF cylinder and a
port UC128P-OBF.
Depending on the applications on the outboard engines, the UC128P-OBF port cylinder is available in 2 versions.
Hydraulic Steering
SVS Ref.: 185073 SVS Ref.: 185074
Ref.: 185030 Ref.: 185031
Standard Port
UC128-OBF/1 UC128-OBF/2
APPLICATIONS
2 engines-1 cylinder
2 engines-2 cylinders
1 engine-1 cylinder • Up to 300 hp. max.
• Up to 500 hp. max.
Up to 300 hp. max. • Up to 500 hp. max. (counter rotating
• Up to 600 hp max. (counter rotating engines)
engines)
443
ENGINES FOR UC146 CYLINDERS
APPLICATIONS
444
UC146-OBF FRONT MOUNT OUTBOARD CYLINDERS
Specifications:
- Volume: 146,5cc
- Output force: 525kg
Ref.: 185021 - Inside Ø: 38mm
- Stroke: 195mm
- Connections: 3/8”.
Depending on the applications on the outboard engines, the UC146 is available in 3 versions.
Hydraulic Steering
445
UC132-OBS SIDE MOUNT OUTBOARD CYLINDER
Specifications:
- Volume: 132cc
- Output force: 455kg
- Inside Ø: 32mm
- Stroke: 203mm
- Connections: 3/8”.
Single station Dual station Splashwell dimension requirements for UC132 cylinders.
A=337mm
APPLICATIONS
Hydraulic Steering
446
STRAIGHT CONNEC. 45º ELBOW 90º ELBOW 90º ELBOW UNION “T” BLEED “T”
G 1/4” thread for G 1/4” thread for G 1/4” thread for G 1/4” thread for G 1/4” thread for G 1/4” thread for
3/8” tube 3/8” tube 3/8” tube 3/8” tube 3/8” tube 3/8” tube
Ref.: 180055 Nickel Ref.: 180016 Ref.: 180056 Ref.: 180017 Ref.: 180057 Ref.: 180058
CONNECTIONS 3/8” NUTS STRAIGHT CONNEC. BLEED “T” QUICK CONN. QUICK CONN.
BLEED “T” BLEED “T”
FOR CYLINDER
For UC94-OBF
5/16” Ref.: 180065 Bronze Ref.: 180018 For 12mm tube With 3/8” trap cylinder
Ø12 Ref.: 185097 Nickel Ref.: 180021 Ref.: 180022 Ref.: 180023 Ref.: 180024 Ref.: 180025
Hydraulic Steering
Ref.: 185060
Distance between
engine centres:
DUAL THRU-HULL HOSE KITS 660 to 950mm. Ref.: 185057
Black A94
Ref.: 185061
White
Ref.: 185062 Adjustable from:
660 to 950mm.
Chrome
Ref.: 185056
Ref.: 185063
Suitable for applications with single UC128-OBF
(or UC128-SVS) front mount cylinders.
DUAL THRU-BULKHEADS A88 / A92
WITH FITTINGS Black Universal tie bars for
Ref.: 185064 twin outboard engines.
Stainless steel.
White 650-950mm
BLEED TERMINAL Ref.: 180425
Ref.: 185065
550-700mm Ref.: 180426
Chrome
700-950mm Ref.: 185059
Ref.: 185066 Ref.: 180014
447
OUTBOARD STEERING SYSTEMS
GOTECH
Version UC94-OBF/1
Content: Ref.: 185085
Ref.: 185015
- Intermediate helm pump UP18.
- Front mount outboard cylinder UC81-OBF. HYCO-OBF
Version UC94-OBF/3
- 1/4”NPT connections for 3/8” hose.
Content: Ref.: 185014
- Hose, connections and oil.
- Front mount helm pump UP20 F.
- Front mount outboard cylinder UC94-OBF.
Pre-assembled hose, specify length required when ordering.
- 2 litres of hydraulic oil.
- Connections and 10m hose.
See engine table for cylinder mounting UC81-OBF on page See engine table for cylinder mounting UC94-OBF/1 and
416. OBF/3 on page 418.
Content:
- Front mount helm pump UP28F-SVS.
Version UC128-OBF/1 - Front mount outboard cylinder UC128-SVS.
Ref.: 185032 - 2 litres of hydraulic oil.
- Max. pressure 1500 PSI.
Version UC128-OBF/2 - Double chamber valve for a faster turning.
NAUTECH 3
Ref.: 185033 - Stronger cylinder.
Content:
- Front mount helm pump UP25 F. Pre-assembled hose, specify length required when ordering.
- Front mount outboard cylinder UC128-OBF. Ref.: 185036 Version UC128/1-SVS
- 2 litres of hydraulic oil.
- Connections and 10m hose. Ref.: 185037 Version UC128/2-SVS
See engine table for cylinder mounting UC128-OBF/1 and See engine table for cylinder mounting UC128-OBF on
OBF/2 on page 420. page 420.
448
INBOARD STEERING SYSTEM
HYCO-I
Content:
- Front mount helm pump UP20 F. Ref.: 185013
- Inboard cylinder UC69-I.
- 1/4”NPT connections for 3/8” hose.
- Hose not included.
- For inboard boats up to 7,5-8 metres in length
and 25 knots maximum speed. Specify length required when ordering.
Accessories
K81 Tilt - X66
Hydraulic Steering
begins cycling oil throughout the entire systems free of air. The system features a
ZeroEmulsion pump, 1 gal capacity reservoir and is compatible with competing helms
and cylinders.
Content:
- 1 motor pump with safety valve, switch and 5 litres tank, it allows the purging of 2
hydraulic steering systems before refilling. 12V electric motor with thermal protection;
current absorption 8A.
- 1 4 metres electric harness with alligator clips for fast connection with the battery.
- 2 double spiralled hose to connect to helm pump and to cylinder. Extended length: Ref.: 180095
6m (19,6’).
- 1 utility tray.
449
T67 STEERING SYSTEM
Corrosion resistant materials.
Standard friction externally adjustable.
90º black bezel. Engines up to 40CV.
Lock-to-lock steering wheel turns: 2,5 approx.
Stroke: 230mm. Steering wheel: Ø380mm max.
Ref.: 180401
M66 CABLE
Mechanical Steering
Ref.: 180403
M90 CABLE
Ref.: 180412 Low profile white bezel
*Steering wheel not included.
Available in 1 foot increments from 7’ to 25’.
The cable is suitable for boxes of other brands.
Not included.
450
T71FC ROTARY STEERING SYSTEM
All stainless steel cable output ends.
Corrosion resistant materials. Minimal feedback.
Particularly suitable where clearance is limited. Compact for mounting.
Bezel not included. Optional X34 and X35 bezels.
Lock-to-lock steering wheel turns: 3,8 approx.
Stroke: 228mm.
Ref.: 180404
Steering wheel: Ø406mm max.
Anti-feedback.
Easy and safe steering: a patented anti-feedback mechanism
eliminates the continuous load on the operator caused by the
propeller torque. Ideal for outboards and surfacing propellers.
Bezel not included. Optional X34 and X35 bezels.
Lock-to-lock steering wheel turns: 3,8 approx.
Stroke: 228mm.
Mechanical Steering
Steering wheel: Ø406mm max. Ref.: 180405
M66 CABLE
Available in 1 foot increments from 7’ to 25’.
M90 CABLE
Not included.
Availables from 7’ to 30’,
1’ by 1’.
Prevent from oil loses.
451
T-91 STEERING SYSTEM
The Ultraflex T91 steering box is specially designed for high performance and high
efficiency applications. Quick and easy installation with patented hook.
Optional 90° or 20° installation
Standard 3/4” tapered shaft
Ref.: 180450
Steering wheel turns: approx. 4,2
Stroke: 228 mm (9”)
Maximum allowable steering wheel diameter:406 mm (16”)
M90 CABLE
Availables from 7’ to 30’, 1’ by 1’.
Prevent from oil loses.
Tiller arm.
Mechanical Steering
Stainless steel.
Ref.: 180414
90º rudder support.
Clamp block. Corrosion resistant.
Marine aluminium and Splashwell mounting. Clevis.
stainless steel. Corrosion resistant. Ref.: 180419
Ref.: 180418 SS Ref.: 180423
Ref.: 180416 Ref.: 180417
Quick connection.
Corrosion resistant.
Ref.: 180424
Tube adaptor
Interior Ø50mm. Ref.: 180440
Sold by the metre.
The flange has to be set in The flange has to be set in
Available in fibreglass with screws. fibreglass with screws.
Ref.: 180436 grey and black. Fibre hole Ø60mm. Ref.: 180439 Grey Fibre hole Ø60mm.
452
CONIC FAIRLEAD RING WIRE TYPE STEERING GROMMETS AND RINGS
ADAPTOR
Permits to install
on a mechanical
Black plastic. Ø74mm Ref.: 180438 Ø105mm Ref.: 180432
steering an steering Ø90mm
wheel for hydraulic Ø105mm Ref.: 180435 Ø152 mm Ref.: 180431
steerings.
Ø152mm Ref.: 180434
Ref.: 180230 Ref.: 180433
To lubricate steering cables in outboard engines. K66 adaptor to connect M66 steering
cables to M47 Ultraflex threaded steering
Seals the steering avoiding corrosion helms.
and water.
Easy to install.
Use the proper oil.
Ref.: 180379
7/8”.
Steering wheels
453
All ULTRAFLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats.
All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards.
MOROSINI FOSCARI
BALBI MANIN
Steering wheels
454
V35 V52-B V57-G
Steering wheels
V65 V70 V74
455
CORSICA B/G CORSICA B/B CORSICA B/G
+ + +
X63 X63 X63
Ref.: 180235 Ref.: 180237 Ref.: 180238
Ø350 - H: 88mm Ø350 - H: 88mm Ø350 - H: 88mm
+ + +
Ref.: 180236 X63 Ref.: 180249 X63 Ref.: 180247 X63
+ + +
X63 X63 X63
Ref.: 180255 Ref.: 180251 Ref.: 180243
Ø350 - H: 88mm Ø350 - H: 88mm Ø350 - H: 88mm - Aluminium
+ + +
X63 X63 X63
Ref.: 180242 Ref.: 180241 Ref.: 180240
Ø350 - H: 88mm Ø350 - H: 88mm Ø350 - H: 88mm
456
WOODEN STEERING WHEELS
CAYMAN W/S ALICUDI
STEERING KNOBS +
X63
Steering wheels
with this symbol
require X63
aluminium hub
with button.
Sold separately.
Ref.: 180256 Ref.: 180257 Ref.: 180209 Ref.: 180228 Ref.: 180234 Ref.: 180229 Ø800mm Ref.: 180258
Screw kit
457
B35 - CONTROL BOX
max. 20
160
90º
57
Ref.: 180343
73
152
Can be installed horizontally or vertically, on the starboard or port
side of the boat. Made of painted marine aluminium.
Pull-out handle disengages shift for warm-up.
With a positive lock-in neutral to prevent accidental gear 241
engagement.
For use with all Ultraflex engine control cables.
C5 and C16 cables require the K35 kit.
C14 cable requires the K51 kit.
B89 B90
Ref.: 180323 Ref.: 180324
White Black
Lock-in neutral.
Ref.: 180394 140
Terminal kit
Engine controls
Spare parts:
B183 B184 B85
231
458
B400 - SINGLE LEVER SIDE MOUNT CONTROL
Single lever / dual action control to operate both throttle and shift.
316 stainless steel lever and flange for a better resistance in the
marine environment.
Enables easy and safe shifting by preventing accidental gear
engagement unless engine is idling.
Can be installed horizontally or vertically, on the starboard or port
side of the boat.
Provided with a brake tension release system easily adjustable
Push-in button for throttle operation in Neutral (ENGINE WARM UP).
For use with ULTRAFLEX C2, C8, C0 and EEC engine control cables.
Ref.: 180320
Single lever / dual action control to operate both throttle and shift.
Suitable for any type of boats with outboard, inboard or I/O power plants.
Enables easy and safe shifting by preventing accidental gear engagement
unless engine is idling.
Made of painted marine aluminium, chrome plated or powder coat finish.
Pull-out handle disengages shift for warm-up.
For use with all Ultraflex engine control cables.
C5 and C16 cables require the K35 kit.
B65
Engine controls
158 157 B103 - B104 - SINGLE LEVER TOP MOUNT CONTROLS
Single lever / dual action control to operate both throttle
and shift. Suitable for any type of boats with outboard,
inboard or I/O power plants. Enables easy and safe shifting
219 104
459
B301-B302 - “LOW PROFILE” SINGLE LEVER TOP MOUNT CONTROLS
Single lever / dual action control to operate both throttle and shift.
Unique low profile style.
Made of marine aluminium, chrome plated (CR) or black powder coat (B).
For use with ULTRAFLEX C14, C7, C8 and C0 engine control cables.
R183
148 100
60 B302CR. Chrome. Double.
112
161 173 Ref.: 180347
Straight Curve
levers. levers.
Terminal kit Ref.: 180395 150
SB1-TWIN
(Throttle and shift -1 engine-)
Ref.: 180342
SB1-SINGLE
(Throttle only)
Ref.: 180341
460
ENGINE CONTROL
Dual lever / dual action control to operate both throttle and shift.
For use with ULTRAFLEX C8 and C0 engine control cables.
316 stainless steel housing and levers.
Width: 193,2mm.
Ref.: 180301
Length: 360mm.
4 2
Private protocol can bus for data transmission.
Single Lever/Dual Function and Dual Lever/Dual Function for shift,
throttle and trolling. Up to 4 control stations. Direct communication with electronic
engines (SAE J 1939 or NMEA 2000). Plug’n play connectivity. Automatic engines
synchronization. Dock assist. IP66. 9-32V. Safety system for electronic errors.
With RPM limiter for your safety and dock manoeuvring.
Engine controls
from one point to another. It is unique design allows for the
efficient transmission of movement up to 20mm (8”) with
maximum efficiency and minimal lost motion.
461
ENGINE ULTRAFLEX BPLUS
-MERCURY
-MARINER over 50hp (37Kw) C5
OUTBOARD -FORCE
-SELVA
-YAMAHA
- SUZUKI C8 - C0 EEC-133
-TOHATSU
- HONDA
- NISSAN
before 1979 C4
JOHNSON-EVINRUDE after 1979 C14
- MERCRUISER C5
STERNDRIVE
before 1979 C4
- OMC after 1979 C14
Ø7
Ø 8.6 Ø7
To order the correct size see “HOW TO ORDER A CONTROL CABLE” on page 442.
462
HIGH EFFICIENCY CONTROL CABLES
Maximum flexibility, minimum resistance with total safety.
EDGE EEC133
A revolutionary cable, high quality and maximum flexibility.
CONDUIT WIRE
Ultimate strength and
performance
CONDUIT LINER
Flexible and durable
Control cables
CONDUIT OUTER
COATED INNER Unique design gives
Coating provides low friction and very high flexibility
maximum efficiency for long life
BINDER
Extremely tough and durable
CORE WIRE
For effective response
463
HOW TO ORDER A CONTROL CABLE
For new installations measure A + B distance from the control along an unobstructed cable routing to clutch and/or throttle
connection.
Round this dimension off to the next whole unit: you will have your cable length.
We recommend that the cable bends have a minimum radius of about 8” (200 mm).
For outboard engine installations, it is necessary to add three feet to the obtained length, in order to allow the engine movement.
To determine the needed length of the REPLACEMENT CABLE, measure it from tip to tip (if there is no measure in the old cover).
When ordering, specify the cable length in feet, rounding the dimension off to the next whole value.
Ref.: 180380 Ref.: 180381 Ref.: 180382 Ref.: 180357 Ref.: 180375 Ref.: 180374 Ref.: 180352
L12 L14
Cable end fitting Cable clamp block K5
L7-E L2 L3 C8/C0/EEC
L13 C8/C0/EEC
Kit to connect C7 cable to
43C or C22 C8/C0/EEC Cable clamp block Shim and Ref.: 180364 Ref.: 180366 Mercury and Mercruiser
ball joint. Stop collar
Ball joint clamp block C22 C22 engines.
Ref.: 180359 Ref.: 180377 Ref.: 180361 Ref.: 180362 Ref.: 180356 Ref.: 180365 Ref.: 180360 Ref.: 180371
Ref.: 180350 Ref.: 180351 Ref.: 180378 Ref.: 180386 Ref.: 180385 Ref.: 180376
464
WIRELESS YACHT CONTROL SYSTEMS
With the use of the remote control device the skipper has control over his vessel from any spot on the yacht.
465
WATCHING MAN - SMART SECURITY AND GEO-LOCATION SYSTEMS
Watching Man is a smart security and geo-location system. Once the device is installed, you will be able to monitor your boat wherever
you are, from any mobile device or computer with an Internet connection.
Alerts:
- Monitoring from mobile phone or web.
- Door opening detection.
- Intruders detection.
- Shore power disconnection alert.
- Battery level alert.
- Detection of water in bilge.
- Engine temperature monitoring.
- Boat gps tracking.
- Geofence: alerts if the boat drifts out of the mooring area.
You can choose between two models of Watching Man, depending on the size of your boat.
BASIC
It´s the simplest model, perfect for small boats. You can install it yourself without the help of a technician.
FULL
If you have a medium or a large size boat, go for the full model. It includes all kinds of security alerts so you won’t have to worry about
anything. Installation is kind of complex so we recommend the help of a technician.
BASIC FULL
Watching Man
466
467
Watching Man
HYDROTAB TRIM SYSTEMS
Designed to operate.
The Hydrotab is an innovative patented trim system designed for maximized efficiency and optimization of boat control and
characterized by absolute simplicity of construction and installation in order to be proved truly reliable in the harsh sea conditions.
Fuel economy.
Advantages
The new patented technology of the Hydrotab interceptors is characterized by extreme simplicity.
Absence of complex internal parts ensures longevity.
The motion transfer is achieved through an extremely robust and flexible tube expanding pneumatically and moves vertically the
trimming blade.
Retraction achieved by a set of powerful springs.
Trim tabs
468
High shifting forces
F type V type
Trim tabs
Hydrotab 3DHC Controller
Position indicator.
Ergonomic design.
Day & Night function.
Auto retraction on engine switch on/off.
Ref.: 047030
469
“RACING” PERFORMANCE TRIM TAB KITS
Running wide open in rough seas isn’t for the faint of heart. Aggressive boating requires durable boat accessories. Performance series
of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go
hard and fast. Actuator speed is precise and controllable so there are no surprises at top speeds. Massive backplates and adjustable
mounting channels with thru-bolted actuators for the ultimate in strength and reliability. Solid stainless steel billet ends that are electro-
polished for unsurpassed durability.
Each kit contains: 2 actuators, 2 trim tab blades with stainless steel full transom
back plates and gland seal, indicator tactile switch and installation hardware.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are
12 Gauge - 304 SS with a 5/8” flared trailing edge and 1/8” diameter hinge pin. Kits include standard actuators with 5/16” SS bolts.
Standard and edge mount kits include: 2 actuators, 2 stainless steel trim tab blades and mounting hardware. For actuation is needed
one control panel and central unit (see on page 448).
470
A real automatic boat control/trim tab control system that actually works – completely & automatically.
The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again.
The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient
running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up
process after the installation of your Auto Glide system.
Imagine that your boat’s running angle is measured 25 times per second and this data is used by the new Auto Glide control
Trim tabs
box to:
Note: The Auto Glide does not control the “trim” function of your engine(s) / motor(s).
Please remember to use the trim feature exactly as you would in the normal operation of your boat.
The Auto Glide Control Box (brain) consists of gyroscopes, accelerometers, and
new, very sophisticated, and patented software. Single station system Ref.: 046024
The Auto Glide has 3 automatic operational modes, 4 automatic settings, and 2 Dual station system Ref.: 046025
manual operational modes. Although you will most likely keep your Auto Glide
in automatic mode, you may immediately convert to manual mode simply by
2ª station kit 50’ Ref.: 046028
pressing one of the 4 up/down buttons on the key pad. All of these functions
are fully explained in our Owner’s Manual B / Operational Instructions.
2ª station kit 30’ Ref.: 046029
471
CONTROL PANELS
Waterproof trim tab tactile switch kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install
tactile switches. With self-check.
12V WITHOUT POSITION INDICATORS WITH POSITION INDICATORS
Control box and panel kit 12/24V Control box and panel kit
Ref.: 046055 Ref.: 046050
Flying bridge optional Flying bridge optional
panel. 6m cable. panel. 6m cable.
Ref.: 046056 Ref.: 046051
Ø2 Ø2
Ø2
Ø2
High-torque Ø2
motor. 5A. Model V Ø1 Ø2
Ref.: 046066 Standard 101 12 5/16” (7,9mm) 5/16” (7,9mm)
Ref.: 046067 Standard 101 24 5/16” (7,9mm) 5/16” (7,9mm)
Precision, machine- Ref.: 046072 101 XD 12 5/16” (7,9mm) 5/16” (7,9mm)
cut brass drive gears
Ref.: 046073 101 XD 24 5/16” (7,9mm) 5/16” (7,9mm)
with stainless steel
inserts for long life. Ref.: 046068 101 XD 12 3/8” (9,5mm) 3/8” (9,5mm)
Ref.: 046076 101 XD 12 5/16” (7,9mm) 3/8” (9,5mm)
Ballscrew spins freely
on 12 ball bearings at Ref.: 046069 101 XD 24 3/8” (9,5mm) 3/8” (9,5mm)
both ends of its stroke 101 XDS 12 5/16” (7,9mm) 5/16” (7,9mm)
Ref.: 046077
so there’s no need
for complicated limit Ref.: 046078 101 XDS 12 3/8” (9,5mm) 3/8” (9,5mm)
switches and clutches.
Ref.: 046097 102 12 5/16” (7,9mm) 5/16” (7,9mm)
Trim tabs
ST Lower bracket ST upper bracket Compact upper bracket Conversion ST upper bracket
Ref.: 046063 Ref.: 046062 Ref.: 046061 Ref.: 046060
Bennett Hydraulic-to-Lenco Electric
Conversion and Performance
Upgrade Kits are designed as a direct
replacement for the Bennett hydraulic
power unit (HPU) on systems using
Control box with indicator Bennett 4-ring standard trim tab
actuators.
Ref.: 046058 “Superstrong” control box
and panel Ref.: 046020 12V
Control box without indicator Conversion kit pin Actuator pins
Ref.: 046059 Ref.: 046019 Ref.: 046064 Ref.: 046065 Ref.: 046021 24V
472
MENTE MARINE (ACS)
The Attitude Correction System (ACS) takes care of the work for you. When changing course, winds shift,
or passengers move, the attitude of the boat is automatically corrected by adjusting the trim tabs. While
making a turn, the boat leans inwards. Thanks to the built-in yaw measurement, the system is able to
detect heading changes and prevent automatic corrections while turning. The system adapts to boats over
the whole range. Thanks to the adaptive functionality, a 15 feet walkaround or a 50 feet performance
yacht is set up to optimum running attitude taking into account the difference in size. When slowing down,
below the planing threshold, trim tabs lose their effect. ACS is aware of this and does not attempt to
trim list conditions while off the plane. When accelerating, the ACS automatically starts up, correcting the
attitude back to the desired even before the boat “breaks over” and reaches the cruising speed. This is
made possible by using a technique for wireless rpm measurement, which does not require any sensor
installation or maintenance. ACS shows trim tab position by lighting an indicator LED for each trim tab.
When a tab is extended, the lit up indicator LED moves downwards. While controlling, the indicator LED
adjacent to the one lit up, is blinking, to show the control direction. No additional sensors are needed
and ACS shows trim tab position for all types of trim tabs after calibration.
Ref.: 046075
COMPONENTS
Trim tabs
1 Hydraulic power unit 12V Ref.: 045031 4 Hardware pack Ref.: 045038
Hydraulic power unit 24V Ref.: 045032 Dual actuator hardware pack Ref.: 045029
2 Solenoid valve Red 12V Ref.: 045033 5 Complete actuator Ref.: 045039
Solenoid valve Green 12V Ref.: 045034 6 Pin Ref.: 045040
Solenoid valve Red 24V Ref.: 045035 7 Hinge Ref.: 045041
Solenoid valve Green 24V Ref.: 045036 8 Control switch Ref.: 045042
3 Cover Ref.: 045037 9 Pressure tube Ref.: 045043
473
Your best choice for marine.
SPEEDOMETER-COMPASS GPS-SPEEDO
474
Your best choice for marine.
FINISHES
All Wema gauges are available in 4 finishes:
A B C D
Black/black bezel White/white bezel Black/chrome bezel White/chrome bezel
Gauges for Ø52 hole with A or B Gauges for Ø85 hole with A or B
finishes have optional bezels: finishes have optional bezels:
Black Ref.: 118291 White Ref.: 118293 Black Ref.: 118296 Chrome Ref.: 118298
Gold Ref.: 118292 Chrome Ref.: 118294 White Ref.: 118297 SS Ref.: 118299
MULTITANK DISPLAYS
Up to 7 tanks.
475
Your best choice for marine.
VOLTMETER GAUGES
AMMETER GAUGES
HOURMETERS
Gauges
QUARTZ CLOCKS
476
Your best choice for marine.
Gauges
RUDDER ANGLE INDICATOR GAUGE
Volts Finish Ohms Ø cut Ø ext.
477
Your best choice for marine.
PIROMETER
Exhaust air temperature gauge.
Volts Finish Range Ø cut Ø ext.
Ref.: 118056 Exhaust temperature sensor 5/8”-18UNF thread with 3,5m cable.
Ref.: 118057 10m extension cable for exhaust temperature gauge.
TRIM GAUGE
Volts Finish Ohms Ø cut Ø ext.
478
Your best choice for marine.
4 ALARMS GAUGE
479
Your best choice for marine.
Length Ohms
American system
480
Your best choice for marine.
Tank senders
1500 0-190 Ref.: 118120
American system
481
Your best choice for marine.
Length Ohms
Aforadores con alarma de alta.
Ref.: 118135 100 240-30 Rosca 1 1/4” BSP
Ref.: 118234 150 240-30 Length Ohms
Ref.: 118149 250 240-30
Ref.: 118136 205 240-30
For diesel, fuel and water. Tank level sender adapter for change
Includes: 10-180 Ohm to 240-33 Ohm.
- Suction pipe with filter.
- Return pipe.
- Air vent pipe.
Length Ohms
Ref.: 118499
Tank senders
Aluminium
O.D. Ø:150mm Cut Out Ø:100mm
Ref.: 118151 Ref.: 118150 Patented folding backing ring.
Interior flange S3 flange
Ref.: 118277
TANKS REGISTRY COVER
1 1/4” BSP flange
Tank lever senders gasket, for
Ref.: 118269 gasoline tanks Ref.: 118153
Ref.: 118268
1 1/2” BSP flange Registry cover Ø115mm
482
Your best choice for marine.
- Voltage: 6V - 24V
- Temperature response time: Minimum 3 minutes after power
supply electrified
- Rated power for alarm switch: 1.2W~3W
- Temperature alarm tolerance: ±3ºC
- Brass body
- Protection rank: IP67 Water temp Oil temp
Grounded
Temperature sensors
Ref.: 118224 5/8-18UNF 323-801-001-008 150119 Ref.: 118673 1/2-14NPT - -
Ref.: 118610 1/2-14BSP 323-801-001-010 - Ref.: 118674 5/8-18UNF - -
Ref.: 118611 M10x1 - -
Ref.: 118612 M16x1,5* - -
HEXAGONAL THREAD
Water sensor
Max temp 120ºC
Equivalent
Thread VDO WEMA
483
Your best choice for marine.
Equivalent Equivalent
Thread VDO WEMA Thread VDO WEMA
GAUGES
Temperature sensors
484
Your best choice for marine.
Water sensor
Max temp 120ºC
Equivalent FASTON CONNECTOR
Thread Alarm VDO WEMA
Temperature sensors
Ref.: 118649 1/2-14NPT 100 - - Ref.: 118692 M20x1,5 120 - -
Ref.: 118650 3/8-18NPT* 98 - - Ref.: 118693 1/2-14NPT 115 - -
Ref.: 118651 M16x1,5* 98 - - Ref.: 118694 M12x1,25 105 - -
Ref.: 118652 1/2-14NPT 110 - - Ref.: 118695 M14x1,5 80 - -
Ref.: 118653 3/8-18NPT 110 - - Ref.: 118696 1/4-18NPT 120 - -
Ref.: 118654 1/2-14NPT* 98 - - Ref.: 118697 M22x1,5* 120 - -
Ref.: 118655 1/4-18NPT 98 - - Ref.: 118698 M16x1,5 135 - -
Ref.: 118656 3/8-18R 98 - - Ref.: 118699 M14x1 100 - -
THREAD ADAPTOR
Interior thread Exterior thread
Ref.: 118270 1/8”-27NPTF 1/4”-14NPTF
Ref.: 118271 1/8”-27NPTF 3/8”-18NPTF
Ref.: 118272 1/8”-27NPTF M14 x 1,5
Ref.: 118273 1/8”-27NPTF M16 x 1,5
Ref.: 118274 1/8”-27NPTF M18 x 1,5
Ref.: 118276 1/8”-27NPTF M10 x 1,5
Ref.: 118275 5/8”-UNF M18 x 1,5
485
Your best choice for marine.
WK G
PRESSURE SENSORS Connecting to alarm Connecting to sensor
- Voltage: 6V - 24V
- Conducting power: < 5W
- Operating temperature: -25 / +120ºC (120ºC max 1h)
- Measuring range: 0~5Bar or 0~10Bar
- Alarm: 0,8bar / 1,4bar
- Output signal: 10-184Ω
- Protection rank: IP66
Thread
Grounded
Ref.: 118750 1/8NPT 0,8 bar A - - Ref.: 118751 1/8NPT 0,8 bar A - -
Ref.: 118756 1/8NPT 0,8 bar B 360-081-030-049 - Ref.: 118752 1/4NPT 0,8 bar A - -
Ref.: 118758 1/4NPT 0,8 bar B - - Ref.: 118753 1/4NPT 1,4 bar A - -
Ref.: 118759 M10x1 1,4 bar B - - Ref.: 118755 M10x1 1,4 bar A - -
Ref.: 118760 R1/8 0,8 bar B - - Ref.: 118761 1/8NPT 0,8 bar B 360-081-030-015 -
Ref.: 118201 1/8NPT 0,8 bar C - 150052 Ref.: 118762 M10x1 1,4 bar B - -
Ref.: 118763 1/4NPT 0,8 bar B - -
Without alarm Ref.: 118765 M14x1,5 0,8 bar B - -
Equivalent Ref.: 118766 R1/8 0,4 bar B - -
Thread Alarm Type VDO WEMA Ref.: 118768 1/8NPT 0,5 bar C - -
Pressure sensors
Ref.: 118771 1/8NPT NO D 360-081-029-004 - Ref.: 118202 1/8NPT 0,8 bar C - 150053
Ref.: 118770 1/8NPT 0,8 bar C - -
Without alarm
Equivalent
Thread Alarm Type VDO WEMA
Ground isolated
*240-33 Ω
486
TACHOMETERS
Black finish.
SPEEDOMETERS
12V - Cut hole Ø: 85mm.
Pitot not included.
487
DIGITAL TACHOMETERS
4 digit display. For W alternator terminal and magnetic pickup.
V RPM Cut Ø Finish
Ref.: 119900 12/24/32 9000 85mm White
Magnetic pickup
Ref.: 119901 12/24/32 9000 85mm Black
*With chrome Ref.: 119902
Ref.: 119901 12/24/32 9000 85mm Black* ring
TEMPERATURE GAUGE
DIGITAL TACHOMETER
MT90 Model. ±1 RPM Accuracy. Easy Calibration. Clear-Read LCD Display. Back Light for
Night Viewing (Battery Powered models). Input Source Can Be a Magnetic Pickup or Engine
Alternator. Power Supplied by Magnetic Pickup or 12, 24, or 32 VDC Battery System
Ref.: 119910
VOLTMETER
INDUCTIVE
VELOCITY SENSOR
MSZ 214
Scale Reading V Cut Ø Finish
Ref.: 119907 16-32 Analog 24 52mm Black
Gauges
HOURMETER
Tamperproof and environmentally sealed.
Mechanical counter, no battery needed to maintain elapsed time.
Reversed polarity protected.
Thread: M14.
Quartz-crystal time base for accurate long-term timekeeping. 5-36V
Scale Reading V Cut Ø Finish Electro-magnetic
transducer with self
Ref.: 119950 0-99999 Analog 12/24 52mm Black excitation.
Ref.: 090298
488
NMEA2000
NMEA 2000® standard contains the requirements of a serial data communications network to inter-connect marine electronic
equipment on vessels. The standard describes a low-cost moderate capacity bi-directional, multi-transmitter/multi-receiver instrument
network to interconnect marine electronic devices.
It is multi-master and self configuring, and there is no central network controller. Equipment designed to this standard will have the
ability to share data, including commands and status with other compatible equipment over a single channel. It is based on CAN
(Controller Area Network). All NMEA 2000® products must be certified by NMEA. Although this standard is 50 times faster than NMEA
0183, it is not intended to support high-bandwidth applications such as video.
NMEA 2000
Female connector Main line “T” connector Male connector
CONNECTORS
NMEA 2000
“T”
interconnection standard,
uses a single digital Instruments
cable to communicate
Ref.: 150001 FUEL DECKFILLERS
with various electronic,
electrical and other 72
onboard systems. It’s
called a “backbone” cable
and can be networked
74
Ref.: 150003 Male with the engine’s electronic
control unit, electronic
Ref.: 150002 Female
navigation devices and
other sensors, regardless
of what company
R4
manufactured each piece,
5
Installable
to show information on
an multifunction display. Ref.: 118500 NMEA2000
Ref.: 150004 Male The NMEA 2000 network
acts like a bi-directional Ref.: 118501 Resistive 0-190 ohms
Ref.: 150005 Female
multiplexer, allowing all
data sources to talk and Displays tank level at the deckfiller and at the existing
CABLES
listen to each other. instruments.
Prevents fuel spills during refuelling.
Maximise range from full tanks.
With connectors Available for “FUEL”, “DIESEL”, “GAS” or “WATER”
Fits 50mm/2” or 38mm/1.5” pipes
LED Level Display Blue
Ref.: 150010 0,9m
NMEA 2000
Robust Stainless Steel with Laser Etched designator
Ref.: 150011 2,7m Easy to Install
Single Plug to NMEA2000® Bus
KIT
Content:
3 - “T” connectors
1 - Female connector
Ref.: 150000 1 - Male connector
1 - 2m Male/Female cable
1 - 2m - 4A power cable 500mm Ref.: 118510
V Cut Ø Finish
Ref.: 115180 12/24 52mm Black
V Cut Ø Finish
Ref.: 115186 12/24 52mm Black
V Cut Ø Finish
Ref.: 115190 12 52mm Black For lever tank sender.
Ref.: 115192 12 52mm Black For tube tank sender.
Ref.: 119190 12/24 52mm Black
Gauges
VOLTMETERS
HOURMETER
490
RUDDER ANGLE INDICATOR GAUGES
V Cut Ø Finish
12/24 85mm Black Ref.: 115171
12 52mm Black Ref.: 115174
TRIM GAUGE
V Cut Ø Finish
12/24 52mm Black Ref.: 115197
Gauges
All about
491
FUEL TANK SENDERS WATER TANK SENDERS
- Lever arm With 54mm flange (bolt centre Ø). - Capacitive Not valid for aluminium tanks.
Fit from 200 to 600mm tanks. 4-20mA 6-24V
V VDO ref.
Min. depth VDO ref.
Ref.: 111092 12-24 N02240104
Ref.: 111082 80-600mm N02240402
For double
indicator Ref.: 111125 12-24 N02240106
Ref.: 111085 600-1200mm N02240404
Ref.: 111086 1200-1500mm N02240406
Fit from 150 to 700mm tanks.
10-180 Ohms. Compatible with Wema meters.
Ref.: 117192 - Lever arm Only for Standard series indicator.
Fit from 200 to 600mm tanks.
- Tube
With 54mm flange (bolt centre Ø). VDO ref.
Min. depth VDO ref.
Ref.: 111083 -stainless steel- 226828001001
Ref.: 111096 221,5 224082008021
Ref.: 111097 251,5 224082006097
Ref.: 111098 279,5 224082007022
Ref.: 111099 310,5 224082005136 SEPTIC TANK SENDERS
Ref.: 111100 341,5 224082005137
With adjustable alarm
Ref.: 111101 346 224082005108 contact. Capacitive. For
Ref.: 111102 372,5 224082007004 all kind of tanks, even
Ref.: 111103 404,5 224082005142 aluminium. For all kind of
conductive liquids.
Ref.: 111104 433,5 224082005098
Ref.: 111105 463,5 224082005044 Min. depth VDO ref.
Ref.: 111106 498,5 224082005117 Ref.: 115087 200-600mm N02240902
Ref.: 111107 591 224082007021 Ref.: 115088 600-1200mm N02240904
Ref.: 111108 692 224082005011 Ref.: 115089 1200-1500mm N02240906
Ref.: 111109 787 224082005072
RUDDER ANGLE TRANSMITTERS
With 80mm flange (bolt centre Ø).
Min. depth VDO ref.
Ref.: 111112 536 224082009037
Ref.: 111113 596 224082009039
Tank senders
FLANGES FOR LEVER ARM TANK SENDERS 54MM FLANGES FOR LEVEL TANK SENDERS S3 H-BSP1 1/4 (38mm)
VDO ref.
Ref.: 111131 N05801432
Ref.: 118277
Ø54mm screws centre
492
er VDO
For oth nces,
refere us.
OIL PRESSURE SENSORS
for all VDO indicators
contact OIL/WATER TEMPERATURE SENSORS
for all VDO indicators
Not valid for water pressure. Thread
M14 x 1,5 Ref.: 112101 TYPE 1
Scale
bar Thread TYPE 1 M16 x 1,5 Ref.: 112102
5 1/8 - 27 NPTF
M18 x 1,5 Ref.: 112103
Ref.: 112001
10 M10 x 1k
1/2 - 14 NPTF Ref.: 112104
Ref.: 112002
1/4 - 18 NPTF Ref.: 112105
10 1/8 - 27 NPTF Ref.: 112003
3/8 - 18 NPTF Ref.: 112106
70 - 120 ºC
25 M10 x 1k Ref.: 112039 Grounded
Grounded 5/8 - 18 UNF - 3A Ref.: 112107
Scale R 1/2 Ref.: 112108
bar Thread TYPE 2
2 M12 x 1,5k Ref.: 112004
2 1/8 - 27 NPTF Ref.: 112005 Thread
TYPE 2
5 M10 x 1k Ref.: 112006 M14 x 1,5 Ref.: 112110
5 1/8 x 27 NPTF Ref.: 112009
140 - 160 ºC
10 M10 x 1k Ref.: 112011 Grounded
Ground isolated
10 M12 x 1,5 Ref.: 112012
Thread TYPE 3
10 M14 x 1,5 Ref.: 112013
M14 x 1,5 Ref.: 112111
10 1/8 - 27 NPTF Ref.: 112014
M18 x 1,5 Ref.: 112112
25 M14 x 1,5 Ref.: 112015
1/2 - 14 NPTF Ref.: 112113
25 1/8 - 27 NPTF Ref.: 112016
3/8 - 18 NPTF Ref.: 112115
25 3/8 - 18 NPTF Ref.: 112017
5/8 - 18 UNF - 2A Ref.: 112117 70 - 120 ºC
30 M18 x 150 Ref.: 112038 Ground isolated
Sensors
100 5/8 - 18 NF - 3 Ref.: 112128
70 - 120 ºC
Grounded
Scale 95 1/2- 14 NPTF Ref.: 112129 with warning contact
bar Thread TYPE 4
5 1/8 - 27 NPTF Ref.: 112030 **
Thread
10 1/8 - 27 NPTF Ref.: 112031 * TYPE
10 1/8 - 27 NPTF Ref.: 112032 **
1/4 - 18 NPTF Ref.: 112132 **
6
25 1/8 - 27 NPTF Ref.: 112033 *
Dual station 3/8 - 18 NPTF Ref.: 112134 **
25 1/8 - 27 NPTF Ref.: 112034 ** * Grounded Dual station
25 3/8 - 18 NPTF Ref.: 112035 ** ** Ground isolated 70 - 120 ºC
Grounded
493
TITAN WATER TANKS
Dimensions in mm.
A B C Capacity
Dimensions in mm.
A B C Capacity
Dimensions in mm.
B
A B C Capacity
C
A
Ref.: 062239 630 280 400 57 lit.
FLEXIBLE TANKS
Includes connectors.
Dimensions Capacity
494
TITAN FUEL TANKS
Dimensions in mm.
A B C Capacity
A B C Capacity
B
625 400 280 73 lit. Ref.: 062107
Fuel tanks
Dimensions in mm.
A B C Capacity
B
390 170 280 12 lit. Ref.: 062101
C
450 230 340 24 lit. Ref.: 062102
A
500 230 360 29 lit. Ref.: 062103
495
EXHAUST HOSES
Black smooth exhausts and sea water resistant rubber tube. High tensile textile
plies reinforcement and helix wire embedded. Black rubbers resistant to abrasion,
heat and marine environment cover, corrugated with fabric impression. Suitable also
for cooling the heat exchangers on pleasure boats. According SAE J 2006:03 R2 e
ISO 13363:04 Type 2 Class B with homologation LLOYD’S REGISTER nr. 96/00127
(E3) and nr. 96/00126 (E3) - 0474 RINA. Working temperature: -0ºC/+100ºC.
FUEL HOSES
Black smooth synthetic rubber. High textile plies reinforcement. Black smooth self-
extinguishing rubber resistant to abrasion, heat, oil and marine environment. Long
length hose suitable for delivery of petrol, diesel and biodiesel to engine on private
boats up to 24m. According SAE J 1527:2004 USCG A1 - ISO7840:2004-A1 CE with
Hoses
homologation DIP 128405/MI/1 0474 RINA and nr. 06/00078 LLOYD’S REGISTER.
Working temperature: -20ºC/+80ºC.
496
FUEL HOSES
Black smooth synthetic rubber. High textile plies reinforcement. Black smooth self-extinguishing rubber resistant to abrasion, heat,
oil and marine environment. Long length hose suitable for delivery of petrol, diesel and biodiesel to engine on private boats. Without
homologation, suitable for outboard engines. Working temperature: -20ºC/+90ºC.
FUEL HOSES
Harwall smooth cover rubber hose for machinery spaces and spaces with fire risk on private boat over 24 metres and on working boats.
Suitable for fuel oil systems, fuel oil tanks, oil lubricating tank vents, exhaust systems, bilge and fireproof systems. Black smooth rubber
tube. High strength synthetic textile plies reinforcement and helix wire embedded in heat insulating rubber. Silica fibre R180’. Black
self-extinguishing rubber cover resistant to oil, heat and fire for max. 30 min. at 800ºC. Working temperature: -30/+100ºC. According
ISO 1307, ISO 15540-15541 DN HT. Corrugated fabric finished.
Hoses
FUEL FILLING HOSES
Black smooth synthetic rubber. High tensile textile plies and helix wire embedded reinforcement. Black corrugated self-extinguishing
synthetic rubber cover resistant to abrasion, heat, oil and marine environment. Fabric impression. Mandrel built hose suitable for
delivery of petrol, diesel and eco-diesel to engine on private boats up to 24m. The composition of the materials allows to have a hose
thinner than the standard ones and guarantees a good resistance to bends, kinking and permeation of the different kinds of fuels.
According SAE J 1527:2004 USCG A1- ISO 7840:2004-A1 CE with homologation DIP 128405/MI/3 0474 RINA and nr 06/00078
LLOYD’S REGISTER. Working temperature: -20ºC/+80ºC.
497
FUEL HOSE FOR OUTBOARD ENGINE
Continuous hose for the drive to 10 bar of unleaded gasoline, diesel and eco-diesel. Particularly suitable for powering outboard
motors. Sized for petroleum products with a maximum aromatic content of 50% and unleaded gasoline with MTBE content of 5% and
oxygenated compounds of 15%. High quality black NBR interior. High tenacity textile reinforcement. Rubber exterior NBR black self-
extinguishing, resistant to sea water, oils and ambient heat.
High tensile textile plies reinforcement. Mandrel built delivery hose suitable for hot water and vapour up to 160ºC at 10 bar. Blue,
smooth rubber cover, resistant to abrasion, heat, traces of oil and weather condition. Fabric impression. White smooth synthetic rubber,
food quality, resistant to heat tube. Complying FDA standards.
Interior special blue rubber as European and FDA food standards and ISO 8099:2000 and 6.4 Antibacterial 5,6.1.10 pair with a
permeability of less than 0.5% in methyl alcohol. High tensile textile reinforcement with wire helix. Special rubber Exterior whit vanilla
scent. Weatherproof and seawater. Maguera mandrel manufactured on specially flexible. For connecting toilet drains, bilge pumps...
AIR HOSES
Hose made of polyester textile. PVC cover with galvanised steel spiral between two layers of
tissue, for air-conditioning, suction of fumes and warm air. Fire (CSTB fire resistant class:
M1 and DIN 4102), ozone and UV resistant. Designed for engine room gas expulsion.
Working temperature: -25ºC/+125ºC.
498
Trust the expert, to
extend the life of
your engine
REPLACEMENT ELEMENTS
Filter bowl
For filter Ref.: 230401
Ref.: 230403
Ref.: 230402
For filter Ref.: 230405 Elbow connection kit
Ref.: 230406 Ref.: 230404
Ref.: 230433 Replacement element for: Racor B32013 and B32020MAM, Aquapower 6001 and 6031, Quicksilver 35-807172
and 35-60494-1, Yamaha ABA-FUEL-FLTR and MAR-23452-00-00, Baldwin BF791, Wix 33225, Sierra 18-7845
and 1807850, Volvo 855686-0/-2.
Ref.: 230434 Replacement element for: Racor B32021MAM, Aquapower 6040 and OMC 174144.
500
TURBINE FUEL FILTERS
Fuel filters
Service clearance 102mm 254mm 254mm
Height 275mm 353mm 542mm
Width 476mm 476mm 476mm
Depth 230mm 235mm 253mm
Weight 7,1kg 8,6kg 12,8kg
Working temperature -20º/+121º -20º/+121º -20º/+121º
Clean pressure drop 4,83kPa 4,83kPa 25,5kPa
Max. pressure 103kPa 103kPa 103kPa
Bowl Clear Clear Clear
Cross reference - - -
Cross element 75/500MAX 75/900MAX 75/1000MAX
Replacement element:
2 microns Ref.: 233088 Ref.: 233094 Ref.: 233097
10 microns Ref.: 233089 Ref.: 233095 Ref.: 233098
30 microns Ref.: 233090 Ref.: 233096 Ref.: 233099
501
TURBINE FUEL FILTERS
502
TURBINE FUEL FILTERS
Aluminium body and bowl.
Fuel filter / water separator employing Microbloc technology.
Removes water and other contaminants from your fuel supply.
Single and duplex.
Duplex units offer a clean filter in reserve, a simple turn of a valve puts a clean filter
back on-line.
Fuel filters
Service clearance 102mm 127mm 254mm
Height 275mm 412mm 535mm
Width 476mm 476mm 476mm
Depth 230mm 248mm 253mm
Weight 7,1kg 10,6kg 13,4kg
Working temperature -20º/+121º -20º/+121º -20º/+121º
Clean pressure drop 4,83kPa 11,7kPa 25,5kPa
Max. pressure 103kPa 103kPa 103kPa
Bowl Metal Metal Metal
Cross reference - - -
Cross element 75/500MAM 75/900MAM 75/1000MAM
Replacement element:
2 microns Ref.: 233088 Ref.: 233091 Ref.: 233094
10 microns Ref.: 233089 Ref.: 233092 Ref.: 233095
30 microns Ref.: 233090 Ref.: 233093 Ref.: 233096
503
TURBINE FUEL FILTERS
Aluminium body and clear PVC bowl.
Fuel filter / water separator employing Microbloc technology.
Removes water and other contaminants from your fuel supply.
Single and duplex. Duplex units offer a clean filter in reserve, a simple turn of a valve puts
a clean filter back on-line.
Ref.: 233050 Ref.: 233051 Ref.: 233053 Ref.: 233070 Ref.: 233073
504
FUEL FILTERS
Replacement elements
KWA-20 Ref.: 230075
KWA-50 Ref.: 230076
Fittings for KWA-20/50 KWA-90 Ref.: 230077
Ref.: 230086 KWA-100 Ref.: 230078
FUEL FILTERS
Fuel filters
LIFEGUARD LG50 FUEL/AIR SEPARATOR
Efficiently removes air from fuel forced into the fuel vent line during refuelling.
All the air is vented and the fuel is returned to the tank. Dramatically reduces
the risk of overboard fuel discharge from the vent line. The Racor Lifeguard is 150
maintenance free - there is nothing to rust or corrode.
Max. flow rate: 12 CFPM (5.6 LPS).
Port size: Inlet/Outlet 5/8” Hose Barb.
For gasoline.
Ref.: 230080 16 mm
il
See o tems
n g e sys
cha g e 1 23
on pa
505
NYLON 6.6 CLAMPS CLAMPS HIGH PRESSURE CLAMPS
Ref.: 128039
Ref.: 128040 150-162 30
Ref.: 128041 162-174 30
Ref.: 128042 213-226 30
Ref.: 128043 252-265 30
Nylon ties PA 6.6 Different colours to identify the lines. Ref.: 128044 266-278 30
Ref.: 128045 292-304 30
Ref.: 128054 4,8x200 Ref.: 128060 Ref.: 128065 Ref.: 128070 Ref.: 128075
For 4,8mm
Ref.: 128055 4,8x290 Ref.: 128061 Ref.: 128066 Ref.: 128071 Ref.: 128076 width ties
Ref.: 128056 4,8x390 Ref.: 128091
506
BULB PUMP WITH HOSE 2,5 metres kit
Ref.: 062141
Made of fuel and alcohol resistant materials, and UV resistant protective coating.
3/
8” stainless steel clamps.
Bronze connection. Permanent
joint for tank and tube. 1/4” NPT
3/
8” bulb pump thread.
Ref.: 062135 Ref.: 062132
ENGINE-FUEL CONNECTORS
Brand Female Male
Tank hardware
Ref.: 062144
Yamaha
Øtube 10mm
Ref.: 062138
Suzuki Øtube 8mm
Tohatsu
507
“LG-X” FUEL CONDITIONERS
Diesel, biofuels, kerosene, gasoline, hydraulic fluid and oil are inherently unstable organic hydrocarbon
fluids that naturally break down. The resulting sediments, acids and tank sludge clog filter elements
and corrode injection systems.
Improve fuel stability, filtration and combustion.
Clean fuel injection systems, filters and tanks.
Lower harmful emissions and fuel consumption.
Eliminate and prevent carbon deposits.
Reduce maintenance and downtime.
Increase safety and reliability.
Lower operating costs.
Easy to install, no moving parts, no electrical hookup, and require zero maintenance.
Port size (NPT/BSP) Flow rate (l/h) Weight (kg) HP range Dimensions LG-X model
CMG BIOCIDE
ACTICIDE® CMG is an Anti-bacterial agent for diesel.
The product prevents long-term growth of bacteria in the diesel or fuel oil tank.
Preventive use: 50ml for each 1.000L of Diesel/EN 590.
Low mucilaginous substances: 150-200ml for each 1.000L of Diesel/EN 590.
Medium mucilaginous substances: 200-250ml for each 1.000L of Diesel/EN 590.
High mucilaginous substances: 300-350ml for each 1.000L of Diesel/EN 590.
For an optimum mixing it is recommended to add ACTICIDE® CMG before tank filling.
Algae-x
With the correct doses this product does not represent any problem for the engines.
500ml bottle
Ref.: 230524
REPLACEMENT ELEMENTS
508
“MTC COMPACT” PORTABLE TANK CLEANING AND FUEL RESTORATION SYSTEMS
Clean tanks while reconditioning, stabilizing and decontaminating diesel, biofuels, light oils and hydraulic fluids. MTC systems
remove water, sediment and sludge that naturally form and accumulate in tanks. They are compact, heavy-duty, multi-stage
industrial systems for long-term reliable service. MTC systems clean tanks and restore fuel to its “Clear & Bright” pristine
condition without the need for anyone to enter the tank.
Three-stage cleaning:
1. The separator/coalescer removes water and particulate that clog filters
and harm injectors.
2. The ALGAE-X® Fuel Conditioner reconditions and stabilizes the fuel,
reversing the process of fuel deterioration and build-up of tank sludge.
3. The industrial type water block fine filter removes emulsified water and
very fine solids down to 2 microns.
Ref.: 230514
BETAGLASS
spare element
Ref.: 230517
Algae-x
509
RUBBER METAL ANTIVIBRATION BOBBINS
Depending on the size of the rubber block, the AMC Mecanocaucho® bobbing has more or less elasticity, which is greater particularly
in all directions perpendicular to its axis (shear). Thus makes it possible to make joins which permit major relative movements, up to
several millimetres (in the case of heat expansion, chassis deformations, etc.). Serves very well for the vibration isolation of machines
where the vibrations are perpendicular to their axis, unless these stresses are too much when applied in this direction.
Compression
A B C H Max. load Kg
Ref.: 232001 12,5 15 M-5 10 10
Ref.: 232002 16 20 M-5 12 15
Ref.: 232003 20 20 M-6 16,5 30
Ref.: 232004 30 30 M-8 20 70
Ref.: 232005 40 28 M-10 25 150
Ref.: 232006 50 35 M-10 25 250
Compression
A B C Max. load Kg
Ref.: 232011 12,5 15 M-5 10
Ref.: 232012 16 20 M-5 15
Ref.: 232013 20 20 M-6 30
Ref.: 232014 30 30 M-8 70
Ref.: 232015 40 28 M-10 150
Ref.: 232016 50 35 M-10 250
Ref.: 232017 80 75 M-14 459
MARINE MOUNT
Ref.: 230005 120 38,5 60 100 M-12 45 48
Ref.: 230006 120 38,5 60 100 M-12 55 71
Ref.: 230007 120 38,5 60 100 M-12 65 98
510
RUBBER METAL ANTIVIBRATIONS
V-SHAPED MARINE TYPE
Works the rubber section in shear and
compression. It is comprised of 2 metal parts
which permits its installation by means of a stud
on the top metal and two holes in the baseplate
for securing it to the chassis .
511
SWIMGUARD PROPELLER PROTECTOR
For 150-250cv outboard engines. Ø450mm.
High grade aluminium and stainless steel construction.
Can be installed and maintained with boat in the water.
Easy on - No drilling or mounting holes required.
Easy off – Can be taken off and reinstalled quickly,
allowing for mission or job specific use.
Durable construction with heavy-duty reinforcements for
hard working environments.
Ref.: 266125
THRUSTOR®
MARINE PROPELLER PROTECTOR
The only one that solves the age-old challenge: “having safety without loss of performance” & without a downside.
The marine industry has long believed that any prop guard
type device causes drag and hinders performance. William
C. Schultz and Terrence L. Smith set out to solve the above
challenge in 2006 as a gift to the safe enjoyment of all
boaters and passengers.
On large displacement hull ships the Schultz™ Nozzle solution
can provide displacement hull ships with fuel-savings and
improved sea keeping. Now is ready to introduce into the
market the smaller commercial and personal watercraft
solution, the internationally patented main propulsion “Multi-
Nozzle Venturi System”, brand named the Thrustor®.
Technology
The system consists of two or more hydro-dynamically engineered rigid nozzles,
positioned around any boat’s propeller. The Venturi ports between the nozzles draft
outside water to the propeller, creating an injection of atmospheric pressure, Venturi
Action (VA), add more water to the propulsion column formed by the nozzles.
The Multi-Nozzle Venturi System establishes a 4th axis (the W axis) that becomes the
focal point for hull control by providing circular rudder control of all 3 axes (pitch,
yaw and roll), fundamentally
eliminating cavitation, vibration and creating vessel stability, while dramatically
increasing thrust, power, and overall performance for all propeller-driven boats.
The system design yields lineal feet of hydrofoils that are all paralleled
Propeller protectors
to the prop shaft (W axis) providing directional thrust and side force (the
19.5” Thrustor® creates approximately 20 lineal feet).
The multi-nozzle system integrates 3 hydro-foiled components:
Safety Ring: forward of propeller, reducing size of possible entry area into
propeller, increasing structural integrity, with hydro-foiled struts and trusses
for added deflection & entry protection.
Thrust Nozzle: actually shrouds the propeller itself.
Exhaust Nozzle: positioned aft of the propeller, trailing by 3 inches.
W Axis created by system application
Material specifications
The Thrustor® is made of aluminium casting alloy A356 akadized surface treated and dielectric.
A356: ISO AISi7Mg is a material with excellent cast and weld ability, pressure tightness, and good resistance to corrosion.
Akadized is a revolutionary metal surface process that adds anticorrosion, thermal resistance, and dielectric properties that are
beyond the measure of conventionally-coated aluminium.
Tests
For over five years, the U.S. Navy has used the MPT nozzle (Thrustor®) in their HM14 (and now HM 15for 2 years) craft.
Both groups use MPT’s 19.5” nozzle for their fleets of 7m RHIB workboats. Under heavy tow, over ground speeds in 2+ sea
states have doubled.
U.S. Navy Chief Benjamin Moore reported (The US Navy’s Operational Proof: Four years of operations by the Navy’s HM14,
anti-mine group, with MPT’s 19.5”): “The deck runs quiet and the sea moves under the boat – does not slam into it.” He
also provided annual reports describing how Thrustor® solved their vital issues concerning speed, power, shock mitigation,
habitability, performance and safety, and without downside.
512
Performance benefits
For over 50 years, a wide variety of propeller guard designs have been developed with the idea of protecting water sport
enthusiasts from injury and deaths caused by propeller strikes, as well as capsized and over-the-side incidents. During this
period most of the designs presented to the market have resulted in a significant decrease in vessel performance.
Although the MPT prime objectives are to deliver ecological and safety benefits, when Mr. Schultz and Mr. Smith developed
the Thrustor® and Schultz Nozzle™ technology, their design objective was to create a system that would also address vessel
performance. In all categories the patented Thrustor® system has added a dimension of
functionality to hull control and vessel stability (pitch, yaw and roll) previously not considered
possible. This unprecedented advancement dramatically increases the vessel’s operational
abilities, improves habitability and overall safety… especially during challenging wind and
surface conditions. The Thrustor® assisted drives have the added dynamics of ten to twenty-
four lineal feet of hydrofoils surrounding the propeller, creating stern lift, 3 axis trim and
directional control of the hull that far exceeds the physical capabilities of any open propeller
drive. The multi-nozzle system mitigates chining of the vessel.
The “hole shot” in all categories is faster and maintains visibility over bows. The towing and
directional thrust is increased, with the US Navy reporting a 230% increase in speed with
a improved seakeeping and habitability: In any weather, sea states 2 and above, Thrustor®
assisted drives have proven to be a faster, smoother and safer ride. Personnel can count on
more platform stability for a successful mission and return.
The sea trials verify that the Thrustor® mitigates propeller cavitation and vibration in all
categories of vessels (the deck goes quiet, no vibration), predicting a longer life to the gear
train, electrical instrumentation and other support systems.
Safety benefits
As a propeller guard the Thrustor® has far exceeded the expected strength, and the load increase that can be carried. The
skegmount, or skeg lock, integrates the system to the cavitation plate, creating a structure that will support the transom weight
of most outboard and stern drive boats, while also shrouding and protecting the propeller.
Reduces propeller strike injury to mammals, especially dolphins and manatees.
Reduces chances of a propeller strike to persons engaged in diving or water sports activities.
Increases planning hull control, thus reducing over-the-side and capsizing incidents.
Ecological benefits
It is anticipated that the patented technology will provide the following ecological and safety benefits.
Reduction of Fuel consumption at cruising speeds due to lower required RPM.
On small craft at a 3500 Cruising RPM, preliminary Thrustor® testing resulted in speed increase of 5% or a reduction of up
to 300 RPM to maintain the same speed, which will result in additional fuel savings of 5%.
Reduces Hydro Carbon emissions by decreasing fuel consumption.
A reduction in cavitation-vibration reduces potentially dangerous sound frequencies to sea life. These negative effects on sea
life are currently under serious study.
Narrows the normally disruptive 360 degree propeller wash into a Model Max. propeller Ø HP ranges
tight, directional thrust towards the rear which: protects fish/egg
8.75” 8.00” 2 to 8HP Ref.: 266154
habitat; protects shallow-water plant habitat; and reduces beach
Propeller protectors
erosion caused by normal prop wash. 9.75” 8.50” 8 to 10HP Ref.: 266155
10.75” 9.50” 10 to 15HP Ref.: 266156
After seven years of successful sea trials have confirmed the following
results: 11.75” 10.50” 15 to 30HP Ref.: 266157
12.75” 11.50” 25 to 60HP Ref.: 266150
* The Thrustor® functions as a prop guard that protects
persons, sea life and nature from propeller strikes. 13.75” 12.25” 40 to 60HP Ref.: 266158
* The Thrustor® will significantly improve vessel handling 14.75” 13.25” 70 to 115HP Ref.: 266151
at all speeds, and it is the only one in the market that
15.75” 14.75” 80 to 115HP Ref.: 266159
performs at medium-high speeds.
* The Thrustor® increases the vessel performance coming 16.50” 15.25” 90 to 300HP Ref.: 266152
out of the hole. 17.00” 15.75” 200 to 350HP (1)
Ref.: 266160
17.75” 16.25” 225 to 350HP Ref.: 266161
19.50” 18.00” 250 to 440HP(2) Ref.: 266153
(1) The 17.00” Thrustor® fits all counter rotating motors with a
14” to 16” Ø propeller & 200+hp. The 17.00” Thrustor®
also fits 40hp to 90hp mercury big foot motors. Unlike other
propeller guards, the Thrustor® is designed to improve vessel
performance and protect at all speeds.
(2) The 19.50” Thrustor® fits Konrad, Bravo-2, Volvo DPH &
Yanmar I/O applications.
513
SHAFT SEALS
Housing
Made from fibre-reinforced composite material, the housing is strong, durable and compact. The SureSeal® is dimensionally
unaffected by temperature and will not absorb water.
Bearing
The integral PTFE® bearing extends the operating life of the SureSeal® under normal operating conditions.
Hose
Connecting the SureSeal® to the vessel is now easier with an “articulating hose”. This hose design automatically positions the
SureSeal® the correct operating distance from the stern tube. No measurements
are required – installation is simplified. The articulating hose reduces side loads
to the SureSeal® when shaft misalignment occurs. As a result, lip seal and
bearing life are extended.
Includes:
- Articulating hose
- Clamps
- Body
- Lip seal
METRIC SYSTEM
Ø shaft A B C
Shaft seals
514
ONE SERIES
Tides Marine seriesOne shaft seals have been designed to be installed on smaller yachts and
work boats. There are two stern tube hose attachment options depending on if the installation
has hard or soft engine mounts. For installations with rigid mounts, high engine rpm and short
shaft lengths the single convolution hose is recommended, which for smaller diesel engines
and softer engine mounts the multi-convolute hose is required. Perfect for sailing boats.
Includes:
- Articulating hose
- Clamps
A
- Body
- Lip seal
B
C
Ø EJE A B C Ø EJE A B C
Ø shaft Ø shaft
Shaft seals
Ref.: 266020 30 Ref.: 266031 1 3/4”
Ref.: 266030 45 Ref.: 266035 2”
Ref.: 266034 50
Ref.: 266024 60
LIP SEALS
Replacement Tides Marine nitrile lip seals complete with a 316 stainless steel garter spring
are the only approved parts for fi tting to Tides Marine Strong® Seal or SureSeal™ units.
Ø shaft Ø shaft
Ref.: 266019 35 Ref.: 266032 1 3/4”
Ref.: 266018 40 Ref.: 266033 2”
Ref.: 266017 45 Ref.: 266028 2 1/2”
Ref.: 700294 50 Ref.: 266029 3”
Ref.: 266021 60
515
The best crew at your
service
ROPE & WEED CUTTERS
Protect Your Valuable Investment and Install Some Peace of Mind Today!
In line rope and weed cutters. Simple shaft driven rope cutter, rotating with the shaft and instantly cutting any rope, weed or
debris picked up or snagged by the propeller. Suitable for commercial and leisure vessels. Easy installation above or underwater.
Easily re-sharpened. No moving parts to service or fail. Cutting action avoids vibrations/shocks often associated with “chopping”
style cutters. Made of BS970 - 316 stainless steel.
Rope cutters
517
RUBBER LINED BEARINGS WITH PHENOLIC SHELL
Shaft Ø Ext. Ø Length
A B C
mm. mm. mm.
Ref.: 230160 22 29 75 A B C
mm. mm. mm.
Ref.: 230161 22 36 75
518
RUBBER LINED BEARINGS WITH BRONZE SHELL
Type A B C
mm. mm. inches mm. inches
Type A B C
inches mm. inches mm. inches mm.
ANCO 1” 25.40 1 / 2”
1
38.10 4” 101.60 Ref.: 230131
AGRA 1” 25.40 1 1/ 4” 31.75 4” 101.60 Ref.: 230132
AOST 1 / 8”
1
28.57 1 / 8”
5
41.27 4 / 2”
1
114.30 Ref.: 230133
1 1/ 4” 31.75 1 1/ 2” 38.10 5” 127 Ref.: 230155
ARGE 1 / 4”
1
31.75 1 / 4”
3
44.25 5” 127 Ref.: 230134
BERG 1 3/ 8” 34.92 1 7/ 8” 47.62 5 1/ 2” 139.70 Ref.: 230135
1 / 2”
1
38.10 1 / 8”
7
47.62 6” 152.40 Ref.: 230156
Bearings
BRES 1 1/ 2” 38.10 2” 50.80 6” 152.40 Ref.: 230136
BULL 1 5/ 8” 41.27 2 1/ 8” 53.97 6 1/ 2” 165.10 Ref.: 230137
BLEV 1 / 4”
3
44.45 2 / 8”
3
60.32 7” 177.80 Ref.: 230138
1 3/ 4” 44.45 2 5/ 8” 66.67 7” 177.80 Ref.: 230150
BARI 1 / 8”
7
47.62 2 / 8”
5
66.67 7 / 2”
1
190.50 Ref.: 230139
BOLO 2” 50.80 2 5/ 8” 66.67 8” 203.20 Ref.: 230140
COMO 2 / 8”
1
53.97 3” 76.20 8 / 2”
1
215.90 Ref.: 230141
CHIA 2 1/ 4” 57.15 3” 76.20 9” 228.60 Ref.: 230142
2 / 4”
1
57.15 3 / 8”
1
79.38 9” 228.60 Ref.: 230152
CAMO 2 3/ 8” 60.32 3 1/ 4” 82.55 9 1/ 2” 241.30 Ref.: 230143
CALT 2 / 2”
1
63.50 3 / 4”
1
82.55 10” 254 Ref.: 230144
CADO 2 5/ 8” 66.67 3 3/ 8” 85.72 101/2” 266.70 Ref.: 230145
CANT 2 3/ 4” 69.85 3 3/ 4” 95.25 11” 279.40 Ref.: 230146
3 / 8”
3
85.72 4 / 2”
1
114.30 14” 355.60 Ref.: 230147
CANI 3 1/ 2” 88.90 4 1/ 2” 114.30 14” 355.60 Ref.: 230151
519
HEAVY-DUTY BLOWERS
For continuous operation.
For Ø100mm tube. Flow rate: 7,1m3/min.
ISO 8846 - Ignition protected.
L L
Dimensions:
12V Ref.: 055212
130x162x122mm.
Ref.: 055313 24V Ref.: 055224
520
AirV BLOWERS
AirV marine ventilation blowers are designed for engine compartment ventilation prior to start up.
AirV heavy duty blowers are made for air intake or extraction in bilges, galleys,
FLANGE MOUNT
accommodation and other compartments.
FLEX MOUNT
Blowers
521
“VE” HELICOIDAL BLOWERS
Helicoidal electric blowers widely used on board for
suction and aspiration of air in closed environment
(WC, kitchens, engine rooms, etc.) Drum casing made
of painted steel sheet. Fan made in polypropylene,
(temperature range -5ºC +80ºC) dynamically and
statically balanced. Permanent magnets motor. IP44.
Model Voltage Power (CV) A RPM dBA Max flow rate* Max pressure** Tipo
VE21 12 0,3 12 2800 65 22 14 Ref.: 055539 A
VE21 12 0,3 12 2800 65 22 14 Ref.: 055540 P
VE21 24 0,3 6 2800 65 22 14 Ref.: 055541 A
VE21 24 0,3 6 2800 65 22 14 Ref.: 055542 P
VE25 12 0,4 17 2500 68 37 19 Ref.: 055543 Rev.
VE25 24 0,4 9 2500 68 37 19 Ref.: 055544 Rev.
VE30 12 0,2 10 1400 60 42 10 Ref.: 055545 Rev.
VE30 24 0,2 5 1400 60 42 10 Ref.: 055546- Rev.
VE30 230 0,75 4 2800 72 80 35 Ref.: 055556
Rev.
VE30 400 0,75 1,7 2800 72 80 35 Ref.: 055555
Rev.
VE35 12 0,2 12 1400 60 62 16 Ref.: 055547
Rev.
VE35 24 0,2 6 1400 60 62 16 Ref.: 055548
Rev.
VE40 12 0,35 14 1400 65 70 20 Ref.: 055549 Rev.
VE40 24 0,35 7 1400 65 70 20 Ref.: 055550 Rev.
VE40 400 0,25 1,2 1400 65 70 20 Ref.: 055554 Rev.
VE45 24 0,35 12 1400 68 108 20 Ref.: 055551 Rev.
VE45 230 2 9,6 2800 82 108 74 Ref.: 055557 Rev.
VE50 24 1 22 1400 74 160 28 Ref.: 055552 Rev.
VE56 24 1 22 1400 74 225 28 Ref.: 055553 Rev.
VEX30/2 24 0,5 14 2000 68 75 22 Ref.: 055561 Rev.
VEX35/1 24 0,25 6 1400 60 62 16 Ref.: 055563 Rev.
Blowers
522
“BLC” CENTRIFUGAL ELECTRIC BLOWERS
Centrifugal electric blowers widely used on board for suction and aspiration of air in
closed environment (WC, kitchens, engine rooms, etc.)
Model Voltage Mount Power (CV) A RPM dBA Max flow rate* Max pressure**
BLC 002 12 Left 0,09 3,2 2800 47 4,5 22 Ref.: 055521
BLC 002 24 Left 0,09 1,6 2800 47 4,5 22 Ref.: 055522
BLC 002 12 Right 0,09 3,2 2800 47 4,5 22 Ref.: 055531
BLC 002 24 Right 0,09 1,6 2800 47 4,5 22 Ref.: 055532
BLC 004 12 Left 0,15 6 2500 56 12 35 Ref.: 055523
BLC 004 24 Left 0,15 3 2500 56 12 35 Ref.: 055524
BLC 004 12 Right 0,15 6 2500 56 12 35 Ref.: 055533
BLC 004 24 Right 0,15 3 2500 56 12 35 Ref.: 055534
BLC 015 12 Left 0,35 24 1400 55 24 34 Ref.: 055525
BLC 015 24 Left 0,35 12 1400 55 24 34 Ref.: 055526
BLC 015 12 Right 0,35 24 1400 55 24 34 Ref.: 055535
BLC 015 24 Right 0,35 12 1400 55 24 34 Ref.: 055536
BLC 023 24 Left 0,75 22 2000 70 37 64 Ref.: 055528
BLC 023 24 Right 0,75 22 2000 70 37 64 Ref.: 055538
BLC 028 24 Left 0,4 14 2800 65 24 64 Ref.: 055527
BLC 028 24 Right 0,4 14 2800 65 24 64 Ref.: 055537
* m3/min
** mmH2O
SMOKE DAMPERS
Multi blades stainless steel smoke dampers. Widely used to avoid the
smoke diffusion on board.
Supplied with electric actuators (24V, 120V or 230V) and safety thermal
fuse rated at 72ºC.
Ref.: 055570
523
BLOWER
Mod. 3.600:
Flow rate 3.600m3/hour - 24V - 8A
Helicoidal electric blowers for suction and 3 blades - Ø295mm
aspiration of air in closed environment.
Drum casing made of painted marine aluminium. D
Fan made in galvanised steel.
Stainless steel hardware.
B A Ref.: 055350
Model A B C D
524
BASICS OF CORROSION
What is corrosion? Why do some metals corrode more than ACTIVE
Chemical corrosion is the process of deterioration of metal components others?
when exposed to an aqueous environment (water). It requires energy All metals tend to be oxidized (corrode) in -1.6V
Magnesium
to convert oxides into pure metals and as a result they are chemically water (except gold), some more easily than
example will degrade (oxidize) back to rust. Only copper and the precious This is a measure of the voltage reached -1.3V
metals (gold, silver, platinum) exist as metals in nature due to their relative by the metal alone when it is immersed
stability. in seawater. The more the metal gives up -1.2V
Navalloy
ANODIC WATER (ELECTROLYTE)
atoms to the water, the more electrons Aluminium/Indium -1.1V
Electrochemical corrosion AREA are left in the metal and the lower the
-1.0V
The metal atoms at the surface “dissolve” negative
charge M + voltage achieved. In other words the metal Zinc
Positive
into the water , which is an electrolyte (a METAL Metal Ions is corroding quickly (dissolving easily). This Aluminium
-0.9V
M +
liquid that can conduct electricity). They voltage can be measured using a standard Alloys
-0.8V
give up electrons and turn into positively Electron half cell such as a silver/silver chloride (Ag/
Flow
charged ions. A small percentage of the water positive
charge AgCl) cell. Metals that remain more positive Cadmium -0.7V
Mild Steel
molecules H2O break down into charged CATHODIC
Negative
Ions formed
are less prone to corrosion. -0.6V
ions – H+ and OH- . Slight variations in the AREA
304 Stainless (Active) -0.5V
metal surface generate different conditions What factors affect corrosion? 316 Stainless (Active)
and the electrons flow through the metal from the corrosion area to other Note: some of these factors can vary Aluminium
-0.4V
areas, close by, where they combine with the ions in the water. This is microscopically at the surface of the metal. Tin Bronze
-0.3V
mainly a reaction with hydrogen ions and oxygen forming water and some Conductivity of electrolyte - seawater is Manganese Copper Silicon Bronze
Bronze
formation of hydrogen gas. The positive metal ions flow through the water a good conductor and freshwater a bad Lead
-0.2V
and combine with the negative ions flowing in the opposite direction conductor, so corrosion is worse in seawater.
CATHODIC - PROTECTED
-0.1V
304 Stainless (Passive)
forming the hydroxide of the metal – this is the first stage towards forming Amount of oxygen - Generally, corrosion 316 Stainless (Passive) 0.0V
the oxide during a series of reactions. rates increase in proportion to the amount of
Titanium
So, you can see that an electric current is set- 0,3 Volts oxygen in the water. However, cracks +0.1V
up between localized areas on the surface of and crevices, which are areas starved of Gold
+0.2V
the metal, resulting in metal loss (corrosion) at ELECTRON
oxygen, become anodic and corrode also Platinum
the anodic areas. At the cathodic areas, only FLOW e.g. under barnacles or boltheads. Presence Graphite +0.3V
DON’T:
Do not paint anodes. They will not work!
Do not mix anode types - aluminium anodes will try to protect zinc anodes on the same bonding circuit.
Do not use zinc anodes on aluminium outdrives - they will not provide the correct protection.
Do not use magnesium anodes on outdrives in salt or brackish water as they will “overprotect” the aluminium.
525
Galvanic corrosion via the ground wire Magnesium anodes
Connecting into shore power connects your ground to the neighbouring Magnesium is the most active metal on the Galvanic scale. It can be used in
boats. If they are not protected by suitable anodes, you will protect them - freshwater, but care must exercised. Magnesium can over-protect aluminium
causing rapid wearing of your anodes. See diagram below. hulls or outdrives in salt or brackish water or even polluted freshwater,
causing paint to be lifted with resulting corrosion. Even a few hours
Galvanic isolator immersion can cause severe damage.
Galvanic corrosion through the ground wire
AC POWER AC POWER
Facts about common marine materials
GROUND
ELECTRON FLOW
Aluminium - An excellent material for marine use (Marine Grades - 5000 or
SHORE
POWER
6000 series). Aluminium is a light, strong metal that is easy to work. It has
DC
GROUND
DC
GROUND excellent resistance to corrosion, due to its ability to rapidly form a protective
oxide surface film. Unprotected, it may become pitted or covered with a white
gritty powder, but these are usually superficial and not harmful. Anodizing
ION ANODE eliminates this.
FLOW It is, however, very active on the galvanic series (-.76 to -1.00 volts), which
makes it prone to galvanic corrosion when in contact with more noble metals.
Bronze, Brass or Monel fittings should be avoided or insulated to prevent
A device that is installed in the green ground wire to block galvanic direct galvanic action. Stainless steel (316) fasteners are recommended. Aluminium
currents, but still allow AC to pass. can be over-protected by too much voltage (-1.1 volts) from magnesium
BEWARE: Make sure your galvanic isolator is rated for the power you use, anodes in salt, brackish or polluted freshwater.
e.g. 30A or 50A. Poor quality galvanic isolators have been known to start
fires, so it’s a good idea to get one which is ABYC recognized or UL listed to Brass - An alloy of copper and zinc. Generally not recommended for exposed
ensure that it has been properly tested. use. Brass suffers from dezincification, which is the galvanic corrosion of the
zinc from the alloy, leaving a spongy brittle component.
Stray current (electrolytic) corrosion Note: Manganese Bronze is a brass not a true bronze and needs galvanic
This is corrosion caused by an external current flowing from a battery or other protection if used underwater.
DC source. This current flows out of the metal into the water and causes loss
of material or corrosion in the process. Common causes include a bare wire Bronze - Alloys of copper with little or no zinc. True bronzes are strong and
in the bilge or incorrectly wired or installed equipment. extremely resistant to corrosion both in the atmosphere and immersed.
Bronzes may contain tin, aluminium, nickel or phosphorus, but the best and
Impressed current system most widely used is silicon bronze. Widely used in fittings and fasteners.
Instead of using a sacrificial anode to generate a protective voltage, a DC
power source can be used. The principle is the same but the current is Cupronickel - Has a high resistance to corrosion and biofouling. Commonly
monitored and adjusted by the system. A non-corroding material is used for used in heat exchangers. Do not use sacrificial anodes on these materials - it
the anode. will only reduce the antifouling effect.
The advantage of an impressed current system is that it can develop
higher voltages than a sacrificial anode. The Stainless Steel - Widely used strong corrosion resistant material. Stainless
disadvantage is that it can “over-protect”. DC Power
Supply
owes its corrosion resistance to its Chromium content, which forms an oxide
Impressed current systems are used on all ELECTRON
MONITORING
SYSTEM
film which is resistant to attack (material is then referred to as passive). Nickel
types of boats and sterndrives. FLOW improves welding properties. 18/8 (% Chromium and Nickel) is the minimum
grade (304 grade). Better is 316 grade which has Molybdenum, which
Bonding improves corrosion resistance. If stainless is starved of oxygen (e.g. under
All electrical equipment and underwater REFERENCE
seals or barnacles) it loses its protective oxide film and becomes active. It will
metal fittings should be connected to the
CATHODE ELECTRODE
then corrode readily. This can also occur in microscopic crevices resulting
same ground point (connected to the in almost invisible corrosion which can cause sudden failure. Good for deck
battery negative terminal). This ensures that COPPER STEEL ANODE
fittings it is not recommended for use underwater (except when galvanically
all components are at the same voltage, protected as, for example a fastener in an aluminium outdrive).
preventing any stray currents occurring.
Wood Hulls - Very prone to deterioration due to various types of wood rot and
Sacrificial anode materials corrosion caused by metal fittings and fastenings. Silicon bronze fasteners
are recommended. Don’t use stainless below the water line.
Zinc anodes
Zinc is the most common material used. Zinc anodes are not very effective in Fiberglass/Composite Hulls - Silicon bronze fasteners are recommended
freshwater and can stop working after only a few months if not made to U.S. below the water line. WARNING: Carbon (graphite) fibres are electrically
Military specifications. It is a good policy to change them regularly, even if conductive and can cause galvanic corrosion between metal components
they look OK. Remember, if an anode doesn’t wear away it is not working! in the structure.
Navalloy (Aluminium) anodes Steel Hulls - Should be coated for corrosion protection and require the use of
The aluminium alloy used in anodes is very different from normal aluminium. sacrificial anodes. Be careful using magnesium anodes. If the hull potential is
It includes about 5% zinc and a trace of Indium, which prevents the build reduced too much (-1.2 volts) hydrogen bubbles can be formed which
up of an oxide layer. Aluminium anode alloy provides more protection and remove the paint.
lasts longer than zinc (see chart). It will continue to work in freshwater and
is safe for use in salt water. Aluminium is the only anode that is safe for all
applications.
(American
Boat and Yacht
Council) Hull material
Wood Fiberglass Aluminium Steel All
Freshwater (pure) Aluminium Aluminium / Magnesium Aluminium Aluminium / Magnesium Aluminium / Magnesium
Freshwater (polluted) Aluminium Aluminium Aluminium Aluminium Aluminium
Brackish Aluminium / Zinc Aluminium / Zinc Aluminium / Zinc Aluminium / Zinc Aluminium
Salt Aluminium / Zinc Aluminium / Zinc Aluminium / Zinc Aluminium / Zinc Aluminium
526
COLLAR ZINC ANODES FOR SHAFTS
Amm Bmm Cmm
B A
Shaft Ø
20 50 47 Ref.: 191001
22 50 47 Ref.: 191002
C
25 56 56 Ref.: 191003
28 56 56 Ref.: 191004
B
30 56 56 Ref.: 191005
32 56 56 Ref.: 191006
35 65 67 Ref.: 191007
38 65 67 Ref.: 191008
B A
40 81 83 Ref.: 191009
45 81 83 Ref.: 191010
50 81 83 Ref.: 191011
C 55 98 98 Ref.: 191012
60 98 98 Ref.: 191013
65 122 108 Ref.: 191014
B
70 122 108 Ref.: 191015
75 122 108 Ref.: 191016
80 122 108 Ref.: 191017
85 122 108 Ref.: 191018
B A
Amm Bmm Cmm
Zinc Anodes
Shaft Ø
527
COLLAR ZINC ANODE FOR IMPERIAL SHAFTS
A” Amm Bmm Cmm
Shaft Ø Shaft Ø
B
Ref.: 193058 1” 25,4 56 56 A
A
Ref.: 193040 25 56 65 B
Ref.: 193041 30 56 65
Ref.: 193042 40 68 78
Ref.: 193043 50 82 100
C
Ref.: 193044 60 82 100
Ref.: 193045 70 82 100 B
Ref.: 191102 22 60 15
Ref.: 191103 25 60 15
Ref.: 191104 30 60 15
C
Ref.: 191105 35 74 18
Ref.: 191360 95 170 40
Ref.: 191122 140 220 60
Ref.: 191129 175 250 80
Ref.: 191130 185 260 80
Amm Hmm
Ø
A
Ref.: 191561 38 38
Ref.: 191562 52 59
Ref.: 191284 Ref.: 191563 52 59
528
ZINC ANODES FOR REGGIANI PROPELLERS
20 28 15 30 Ref.: 191030
25 34 20 34 Ref.: 191031
30 43 25 50 Ref.: 191032
35 48 28 55 Ref.: 191264
40 54 34 54 Ref.: 191283
45 65 40 64 Ref.: 191033
50 74 45 74 Ref.: 191034
55 78 49 75 Ref.: 191035
60 88 55 85 Ref.: 191036
D 25 25 32 39 16 Ref.: 191265
C 30 32 44 52 21 Ref.: 191266
35 37 44 52 24 Ref.: 191267
40 42 49 65 27 Ref.: 191268
A
45 48 59 74 31 Ref.: 191269
B
50 57 73 84 39 Ref.: 191270
55 65 73 85 42 Ref.: 191271
60 71 82 95 46 Ref.: 191272
100 85 99 100 67 Ref.: 191274
A
25 26 39 32 23 Ref.: 191275
30 30 57 41 27 Ref.: 191276
B 35 38 58 44 32 Ref.: 191277
D 40 41 65 50 36 Ref.: 191278
C 45 48 73 59 41 Ref.: 191279
50 59 83 72 46 Ref.: 191280
55 64 83 72 50 Ref.: 191281
60 71 95 82 55 Ref.: 191282
529
DISC ZINC ANODE FOR FERRETTI ZINC ANODES FOR MAX PROP PROPELLERS
Ref.: 191363 61 39 6 6 40
Ref.: 191364 68 42 5 6 44
Ref.: 191365 80 46 6 8 55
B A
530
ZINC ANODES FOR J PROP PROPELLERS
A
44 67 38 Ref.: 191617
51 78 40 Ref.: 191618
60 90 54 Ref.: 191619
ZINC ANODES FOR VARIPROP PROPELLERS ZINC ANODES FOR MAX POWER PROPELLERS
32
ZINC ANODE FOR FLEX-FOLD PROPELLERS ZINC ANODE FOR FLEX-FOLD PROPELLERS
Ø9
55
68
35
37
60 Ref.: 191323 68
Ref.: 191322
ZINC ANODE FOR SIDE POWER PROPELLERS ZINC ANODE FOR SIDE POWER PROPELLERS
19mm hexagon between faces.
4 & 6 HP models. For SP55, 75T, 95T, SE60/185S and
For SP30 and SP40 SE80/185T/SE100 models.
Zinc Anodes
26 models. 44
20
20
7
Ref.: 191613 44 Ref.: 191612
26
531
ZINC ANODE FOR SIDE POWER PROPELLERS
52
Ø M6
55
Ref.: 191614
22MA
Amm Bmm B
Ref.: 191611 42 36
A
Ref.: 191615 46 40
A
Amm Bmm Cmm
B
Ref.: 191626 56 56 68 C
Ref.: 191627 53 56 84
48
Hexagon 28
54
Ref.: 191628
58
Ref.: 191624
50
Ref.: 191625 50
532
ZINC ANODE FOR VETUS PROPELLERS
50
Original ref.: SET0149.
Bow thruster 35/55.
17
Ref.: 191621
36
56
15
40
Ref.: 191622
Ref.: 191623
29
Ref.: 191629
40
28”-30” propellers.
33
46 Ref.: 191635
6,5
C
22”-26” 31 20 8,5 Ref.: 191636
533
ZINC ANODE FOR GORI PROPELLERS
Amm Bmm Cmm
7
B A
Ref.: 191642 3BLS/prop 18”-20” 53 83 40
Ref.: 191640 SD/3BL 18”-20” 60 95 34
Ref.: 191639 3BL 22”-26” 63 95 47
Ref.: 191641 3BL 28”-30” 80 97 40 C
Shaft Ø54mm
Ref.: 191634
D
E
Ref.: 191061 23 17 18
Ref.: 191062 30 31 25
Ref.: 191063 48 44 25
A B
Amm Bmm Cmm
Ref.: 191201 70 8 17
Ref.: 191202 90 8 20 C
534
DISC ZINC ANODES
Ref.: 190963
Ø10
193051 (see page 585).
225 128
24 38
Weight: 7kg.
225
Ref.: 193025 145 Ref.: 193027
535
DISC ZINC ANODE
Ø10
80
Weight: 1kg.
Base rubber gasket for mounting Ref.: 193050
(see page 585).
30
66
45
Ref.: 191319
80
80
150
Ø11x15
Ref.: 191225 60 25
38
45
190
Ref.: 191305
D A
Amm Bmm Cmm Dmm
536
PLATE ZINC ANODE FAIRLINE TYPE 200MM
Ø 12x110
200 Base rubber gasket for mounting Ref.: 193054 (see page 553).
Ref.: 191227
65 35
Ref.: 193034
65 35
Ref.: 191226
65 35
Ref.: 193036
65 35
200 305
Weight: 4kg.
Base rubber gasket for mounting Ref.: 193057 (see page 553).
Ø10x16
Ref.: 193038
75 40
Base rubber gasket for mounting Ref.: 193053 (see page 553).
D A
C B
445 60 90 230 12 Ref.: 193029
537
PLATE ZINC ANODE FAIRLINE TYPE 447MM
231
447
Ref.: 191228
90 40
33 85
Ref.: 191309 45 20
52 150
7
Ref.: 191308
45 20
40
PLATE ZINC ANODE 5 BOLTS
120 150
Ref.: 191215
69 15
Ref.: 191306
538
PLATE ZINC ANODE 220MM
Weigth: 4kg
Ref.: 191208
Ref.: 191209
150 28
C A
8 Amm Bmm Cmm Dmm
Ref.: 191564
Ref.: 191198
E
D A
539
PLATE ZINC ANODES WITH STRAP
A D
A D
Ref.: 193035
80 35
225 170
Weight: 3kg.
Ref.: 193039
85 30
165 105
Weight: 0,5kg.
Ref.: 193032
50 30
540
PLATE ZINC ANODE WITH STRAP
80
Ref.: 193033
35
Weight: 4,5kg.
290 390
Ref.: 193037
80 40
Weight: 6kg.
380 300
Ref.: 193028
120 35
460 340
Weight: 10kg.
Ref.: 193031
150 35
Ref.: 193079
Amm ØBmm
A
541
ROD ZINC ANODE WITH WIRE ROD ZINC ANODE WITH WIRE
225
Original ref.: Original ref.:
12
41106-ZW-000 411062W-9000
60
OMC HP 2-150
50 16
Original ref.:
173029
Ref.: 191537 Ref.: 191535
150
HP 25-40-50 Honda
Original ref.: HP 8-10-15
41107-ZV5-000 Original ref.:
68
41106-ZW9-000
104
542
MERCURY/MERCRUISER ZINC ANODE MERCURY/MERCRUISER ZINC ANODE
Anode for
65 Mercruiser 90 Anode for
7/16”
stainless steel Mercruiser
17
propeller 90 HP 50-75 (4S)
HP 50/140 Original ref.:
65 7/16”
90
Bravo One drive 31640Q4
17
Original ref.: 90
90
822777Q1
90
Mercury 90 Mercury
94
HP 20-25 HP 15-25 (4S)
Original ref.: 114 (after 1990)
116 96286T 53 8MA Original ref.:
51 43 9843296
14
114
543
MERCURY/MERCRUISER ZINC ANODE MERCURY/MERCRUISER ZINC ANODE
183
83
Original ref.: Original ref.:
17264T2 821629Q1
72 18
121
35
Ref.: 191462 45 24
AT YOUR DISPOSAL
544
MERCURY/MERCRUISER ZINC ANODE MERCURY/MERCRUISER ZINC ANODE
39 39
Anode for Anode for
Mercruiser Mercruiser
Alpha drive Alpha drive
66 95 95
II generation II generation
Original ref.: Original ref.:
80 80
43994A2 33
821631T1
33
48
Mercury
Mercruiser 11 HP 40-250
166
178
190
Bravo drive Original ref.:
175
35 Original ref.: 818298Q1
821630Q1
16 48
Mercruiser
166
190
166
HP 25-30-40 (4S)
Original ref.: HP 90-100 and
825271-1 Super America
HP 80-115.
19 12 62 20 Original ref.:
43396
Ref.: 191453 Ref.: 191441
HP 150-200 Mercruiser
240
Bravo drive
260
Original ref.:
89949A1 Original ref.:
Yamaha 51 806190Q1
60
HP 150-200
60
Original ref.:
49 6 Mercruiser 8239121
198
160
178
37
Alpha One drive Evinrude HP 70 (4S),
Original ref.: Suzuki
16 806189Q1 HP 70-90-115-140 and
40 15
Tohatsu HP 40-140.
Original ref.: 3C7-60218-1
545
MERCURY/MERCRUISER ZINC ANODE MERCURY/MERCRUISER ZINC ANODE
Anode for 22
Anode for
Mercruiser
Mercruiser
38,5
Bravo 3 drive 52
Alpha One drive 82
Original ref.:
Original ref.:
865182A01
61 806105 84
74
25
54
Ref.: 191460
Ref.: 191448
52 Anode for 17
Anode for Ø7
Mercury
Mercury 26
HP 75-250 (4S),
77
Original ref.: 72
Mer 826134T,
29
12
893404 Hon 41109-ZW1-003
33
Mercruiser 40 Mercruiser
Original ref.: Alpha One and 1/2”
826887M Bravo One drives
Original ref.: 29
16 55989Q9
33
546
MERCURY/MERCRUISER ZINC ANODE MERCURY/MERCRUISER ZINC ANODE
7
32
7
Mercury HP 4 Mercruiser
50
Original ref.: inboard
8 8239139 Original ref.:
9
34762A1
61
20
35
145
100
46
145
110
50
Cobra SX drive
43 Original ref.: 77 Original ref.:
986158 392123
91
37 22
118
91
547
OMC ZINC ANODE OMC ZINC ANODE
40
Anode for OMC Anode for OMC
95 55
Cobra drive HP 135-150-175
50
Original ref.: Original ref.:
110
984547 30
431308
19
22
95
75
100
115
42 22
HP 100-245 HP 60-280
38
Original ref.: 40 Original ref.: 23
982277 80 433458
100
185 56
46
23 19 12 6,5
HP 60-250 HP 3,5
Original ref.: HP 5-6 (4S)
433580 Original ref.: 19
172
5031705
9
35
548
OMC ZINC ANODE OMC ZINC ANODE
12
Anode for OMC Anode for OMC bombardier
HP 9,9-15 (4S) Original ref.: 5007089
Original ref.:
37 338635
35
5 20 5/16 UNC
27
175
324636
6,5 20 10
27
HP 90-115
HPS 22
DF SERIES 115-140
23 Original ref.:
40
OMC
5030267
19 HP 140
6 Suzuki HP5
39 Original ref.:
Original ref.: 55
SU 55321-90J01
55320-98400
549
OMC ZINC ANODE OMC/SUZUKI ZINC ANODE
6,5
Anode for 73
Anode for OMC 112
Evinrude
outboard V4
HP 70 (4S)
Original ref.:
Suzuki 50
338742 60
HP 70-90-115-140 16
13
130
Original ref.: 85
5032929
70
30 15 6
Suzuki Suzuki
HP 2-8 HP 40-115
Original ref.: Original ref.: 12
55300-95500 55320-95310 40
550
SUZUKI ZINC ANODE SUZUKI ZINC ANODE
23
18 Anode for Anode for
Suzuki 23
Suzuki
6MA HP 2,2-4 Original ref.:
11 Original ref.: 41810-87D00
22
41811-98500
48
47
551
VOLVO ZINC ANODE VOLVO ZINC ANODE
107 55
Anode for
Anode for
105 45 Volvo 110 drive 65
Volvo
Original ref.: 45
two halves collar
875812
for sailboats 27 140
Original ref.: 140
75
3888305
Ref.: 191409
Ref.: 191424
Anode for 62
Anode for 40
115 95
Volvo 280 drive Volvo 120 drive
Original ref.: sailboat
80 72
875815 35 Original ref.: 28
155
876286
120
30
Anode for
Anode for
Zinc Anodes
58
113 Volvo 4MA
Volvo 250/270
Original ref.:
drive
80 4110098
Original ref.: 9
22
875805 113
30
552
VOLVO ZINC ANODE VOLVO ZINC ANODE
185
Original ref.: 53
Original ref.:
852818 832934
15 16 53
Anode for 35
Anode for
Volvo Volvo
fork S-Drive SERIES
65
147
14
Volvo 28 Volvo
130
36
85
872139 876638
42 23 55
553
VOLVO ZINC ANODE VOLVO ZINC ANODE
78
78
Volvo Volvo
DPR SERIES 130 SERIES DPH 130
DPR DPH
Original ref.: Original ref.:
3589875 35 3588746 35
90
30
Anode for 90 Anode for
Volvo Volvo
8
150
35
SX-A/DPS-A SX-A/DPS-A
100
Anode for 6
Anode for
Zinc Anodes
554
VOLVO ZINC ANODE VOLVO ZINC ANODE
140
40005875
85 30
Ref.: 191426 Ref.: 191400
22
53
Ref.: 191597
Ref.: 191596
A
Shaft Ø A B Thread Original ref.
25/30 75 35 M16 873411 Ref.: 191394
Thread 25/30 75 35 3/4”UNC 833913 Ref.: 191396
35 80 45 7/8”UNC 833915 Ref.: 191397
40 80 45 1”UNC 828140 Ref.: 191398
B
40 80 45 24x2 873413 Ref.: 191395
Available
Zinc Anodes
555
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
138
94 8,5
Anode for 100 Anode for
Yamaha Yamaha
HP 200-250 (2S) 110 HP 20-25-30-70
Original ref.: Original ref.: 50
70
69L-45371-00 664-45371-01
20 104
10x1,25
90
Anode for Anode for
90
Yamaha Yamaha 105
HP 60-90 HP 60-90
70
Original ref.: 49 10x1,25 10x1,25
668-45371-02 18 17
140 90
90
Yamaha Yamaha
HP 115-125 HP 60-225
Original ref.: 57 10x1,25
stainless steel 25
6E5-45371-01 17
propeller 10x1,25
90 Original ref.:
6E5-45371-10
556
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
Yamaha Yamaha
HP 130-260 HP 10-50
70 Original ref.: 57 Original ref.:
17 6J9-45371-00 67C-45371-00
145
110
5,5
65 Anode for Anode for
Yamaha Yamaha
HP 9,9 - (4S) 25 HP 2-25
38
9
53
8,5 25
Anode for Anode for
Yamaha 8MA
Yamaha
51 HP 40-85 HP 40-50 (2-4S)
23 Original ref.:
14
63D-45251-10
35
Yamaha
Yamaha HP 40-50 (2-4S)
62
HP 115-225
200
185
Original ref.:
Original ref.: 85 63D-45251-01
6G5-45251-02 45
46 50
557
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
Anode for Yamaha Anode for
In-outboard TD Yamaha
Original ref.: In-outboard
6U0-45251-00 TD
558
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
559
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
Anode for Yamaha Anode for Yamaha HP
Original ref.: 9,9D/F - 15D/F
68V-11325-02 Original ref.:
682-11325-00
560
YAMAHA ZINC ANODE YAMAHA ZINC ANODE
6H4-45251-01 62Y-11325-00
35 17 17
23
Anode for 25 Anode for
Zinc Anodes
23 Yamaha 25 Yamaha
5MA HP 80-100 8
F-25 (4S)
Original ref.: 13 Original ref.:
67F-11325-00 63 65W-45251-00
32
561
SELVA ZINC ANODE SELVA ZINC ANODE
Anode for Selva Anode for Selva
HP 25-40 HP 40
Original ref.:
2500065
562
SELVA ZINC ANODE SELVA ZINC ANODE
563
YANMAR ZINC ANODE YANMAR ZINC ANODE
M8
M8
55
46
30
20
30
20
M8 Zinc anode
for Yanmar
35
20 M8x18
20
72
Zinc anode for 77
Zinc anode for
Yanmar Yanmar 66
43
107
ZYM-3 ZYM-5
24
25
77 148
8
Zinc Anodes
54
Zinc anode
for Yanmar 51
HP 70-85
10
75
14
51
564
RENAULT ZINC ANODES
20 30
40
16x2 20x2,5
28x2,5
37 50
50
26 35 40
565
ARNESON ZINC ANODE KAMEWA WATERJET ZINC ANODE
Original ref.:
IT50505039
A B H
50 78 45 Ref.: 191741
Ref.: 191362
60 90 48 Ref.: 191742
Anode for
Ø13
Kamewa Waterjet
Ø13
Original ref.:
57
77 10107701
31 32
23 25
77 62
40
24
58
Anode for
Zinc Anodes
21 23
17 21
Ref.: 191736 Ref.: 191737
566
KAMEWA WATERJET ZINC ANODE KAMEWA WATERJET ZINC ANODE
A B H
Ref.: 191739 17 80 27
Ref.: 191738 * Ref.: 191740 13 70 42
Ø10 Ø10
57 80 80 100
22 24 17 20
8
Ø12
100 60 115
25
100 63 30
45
8MA 27 17
75 25
Ø 10,5
70
Zinc Anodes
66
15 32
75
54
42 57
175 13
98
567
CASTOLDI WATERJET ZINC ANODE CASTOLDI WATERJET ZINC ANODE
10MA 22
21
28
6MA
30
23 22
8 57 11 80
37 50
70
45
70
60
120
90
568
DISC ZINC ANODE FOR COOLING SYSTEMS
Ø Ext Ø Int H
74 14 25 Ref.: 190963
80 19 20 Ref.: 190710
100 15 34 Ref.: 190711
Bolt zinc anode for Volvo inboard engine cooling system, for
TD, D, TAD, TMD, MD, TAM, AQD Series.
Ref.: 190942
A B C (Ø)
3/8” GAS 40 10 Ref.: 190735
3/4” GAS 80 20 Ref.: 190736
1/2” GAS 50 16 Ref.: 190737
A B C (Ø) Brand
1/4” GAS 44 9 WESTERBECKER Ref.: 190725
M26 45 20 BADOUIN Ref.: 190752
3/8” GAS 32 12 YANMAR Ref.: 190754
1/2” GAS 50 16,5 YANMAR Ref.: 190755
A B C (Ø)
M16x150 18 11 Ref.: 190730
M16x3/8” 20 11 Ref.: 190731
569
BOLT ZINC ANODE FOR COOLING SYSTEM
A B C (Ø) Brand
Ref.: 190739 3/8” 38 12 CATERPILLAR
Ref.: 190740 1/4” 57 10 CATERPILLAR
Ref.: 190743 3/8” 51 16 CATERPILLAR
Ref.: 190744 3/8” 66 16 CATERPILLAR
Ref.: 190745 3/8” 78 16 CATERPILLAR
Ref.: 190746 3/8” 32 20 CATERPILLAR
Ref.: 190747 3/8” 30 12 CATERPILLAR
Ref.: 190748 5/16” 30 9 CATERPILLAR
Ref.: 190749 7/16” 33 15 CATERPILLAR
Ref.: 190750 3/8” 40 25 CATERPILLAR
Ref.: 190751 M6 45 17 SCANIA
Ref.: 190756 M8 71 20 YANMAR
Ref.: 190945 3/8” 41 10 VOLVO
Ref.: 190946 7/16” 41 16 VOLVO
570
ANODES FOR ENGINE COOLING SYSTEMS AND HEAT EXCHANGERS
Amm Bmm C thread Brand
571
COLLAR ALUMINIUM ANODES FOR SHAFTS
Ref.: 192120 20 54 54
Ref.: 192121 25 54 54
B
Ref.: 192122 30 54 54
Ref.: 192123 35 64 64
Ref.: 192124 40 73 83
Ref.: 192125 45 73 83 A
C
Ref.: 192126 50 73 83
Ref.: 192127 60 95 108
Ref.: 192128 70 95 121
Ref.: 192129 80 95 121
Amm Bmm
Ref.: 192090 48 7
Ref.: 192091 72 13
A
Ref.: 192092 95 13
Ref.: 192093 127 16
B
Ref.: 192094 152 22
Aluminium Anodes
110 10
25
572
DISC ALUMINIUM ANODE
225
Weight: 2,8kg.
24
Ref.: 193001
225
38
145
Ref.: 193003
30
100
Ref.: 193002
40 Ref.: 192095
68
Aluminium Anodes
Ref.: 191356
573
PLATE ALUMINIUM ANODE FOR VETUS
Ref.: 191357
Base rubber gasket for mounting Ref.: 193057 (see page 553).
Ø10x16
Ref.: 193008 78 40
Weight: 3kg.
Ref.: 192106
Ø 22x26
160 300
Ref.: 191213
150 28
574
PLATE ALUMINIUM ANODE 95MM
Ø8,3
95 38
38 13
Ref.: 192103
13
PLATE ALUMINIUM ANODE 83MM
Ø6
46 83
Ref.: 192101
32
Ref.: 193005
80 35
Ref.: 193006
80 35
Ref.: 193009
85 30
575
PLATE ALUMINIUM ANODE WITH STRAP
385 300
Weight: 2kg.
Ref.: 193007
80 40
380 300
Weight: 2,5kg.
Ref.: 193004
120 35
A D
Amm Bmm Cmm Dmm Weight kg
A D
Ø9,5
2 units kit.
38 95
Ref.: 192102
29
576
HONDA/YAMAHA ALUMINIUM ANODE HONDA/MERCURY/MERCRUISER ALUMINIUM ANODE
17
Anode for
25 Anode for Honda
6
25 Honda 77 Original ref.:
Original ref.: 41109-ZW1-003
13 41106-935-812 Mercruiser
63 Yamaha 29 22
HP 75-250 (4S)
12
Original ref.: Original ref.:
6E0-45251-11 826134T
83
Alpha One drive 175 Bravo drive
35
Original ref.: Original ref.:
821629T1 821630T1
16
72 18
49
Anode for Anode for
6 49 6
Mercruiser 37
Mercruiser
Bravo drive Alpha One drive
Original ref.: Original ref.:
51
806190T1 16 806189T1
577
MERCURY/MERCRUISER ALUMINIUM ANODE MERCURY/MERCRUISER ALUMINIUM ANODE
22
Anode for 33
Anode for
38,5
Mercruiser Mercruiser 52
578
MERCURY/MERCRUISER ALUMINIUM ANODE KIT MERCURY/MERCRUISER ALUMINIUM ANODE KIT
Alpha One
II generation Bravo I
Ref.: 192006 Ref.: 192007
The kit contains:
The kit contains:
1x Ref.: 192062
1x Ref.: 192067
1x Ref.: 192069
1x Ref.: 192064 1x Ref.: 192071
2x Ref.: 192063 1x Ref.: 192069
1x Ref.: 192066 2x Ref.: 192068
Bravo 3
Bravo II
Ref.: 192009
Ref.: 192008
The kit contains:
1x Ref.: 192067
Ref.: 192067 1x Ref.: 192074
1x Ref.: 192069
Ref.: 192069
2x Ref.: 192068
1x Ref.: 192073
Verado 6
Verado 4
Ref.: 192012
Ref.: 192011
The kit contains:
The kit contains: 1x Ref.: 192076
1x Ref.: 192072 1x Ref.: 192069
1x Ref.: 192069 2x Ref.: 192081
2x Ref.: 192081 4x Ref.: 192075
40
24
Anode for Anode for
50
OMC OMC
HP 135-150-175 40 HP 50-200
Original ref.: Original ref.:
22
431704 436745
75 38
579
OMC ALUMINIUM ANODE OMC ALUMINIUM ANODE
111 74
Anode for Anode for
104 63
OMC OMC
Cobra drive HP 50-75
Original ref.: M6 outboard
25 35
984513 Original ref.:
145
392462 100
96
25
Anode for
OMC 23 OMC Cobra
HP 2-150 M5 Ref.: 192001
Original ref.: 11
The kit contains:
173029 60 1x Ref.: 192029
1x Ref.: 192028
1x Ref.: 192030
Ref.: 192023 1x Ref.: 192033
HP 50-225
Ref.: 192002 HP 90-225
Ref.: 192003
The kit contains:
1x Ref.: 192025
The kit contains:
1x Ref.: 192030
1x Ref.: 192023
2x Ref.: 192031
1x Ref.: 192032
1x Ref.: 192023
580
VOLVO ALUMINIUM ANODE VOLVO ALUMINIUM ANODE
111 91
Anode for 115
62 Anode for
Volvo 290 Volvo 280 drive
92 Duoprop drive 80 Original ref.:
35 Original ref.: 35 875815
145 875821 155
107
55 Anode for 52 Anode for
98
Volvo 110 drive Volvo 100 drive
65 Original ref.: Original ref.:
45 875812 80 875810
11
140 98
Anode for 38
Anode for
36 86 130 Volvo DPX drive Volvo
Original ref.: fork
13
872139 Original ref.:
65
42
872793
23
581
VOLVO ALUMINIUM ANODE VOLVO ALUMINIUM ANODE
90
Anode for
Anode for Volvo SX and 78 50
Volvo SX drive 100 OMC Cobra drives
Original ref.: Original ref.:
113
385541 35 3854130 47
147
78
150
35
100
582
VOLVO ALUMINIUM ANODE KIT VOLVO ALUMINIUM ANODE KIT
Volvo 290
Volvo 290 drive Duoprop drive
Ref.: 192018 Ref.: 192019
90
Anode for Anode for
Yamaha Yamaha HP 60-90
HP 115-125
90 Original ref.:
57 10x1,25 Original ref.: 688-45371-02
17 6E5-45371-01 49 10x1,25
90 18
140
Ref.: 192039
Ref.: 192047
583
YAMAHA ALUMINIUM ANODE YAMAHA ALUMINIUM ANODE
24
Anode for Anode for
14
Yamaha Yamaha
Original ref.: HP 115-125
688-45251-01 Original ref.:
24 6E5-45371-01
23
7
Anode for Anode for
Yamaha Yamaha 23
47
35 17
45 50
The kit contains:
1x Ref.: 192042
Ref.: 192048 1x Ref.: 192039
584
ANODE BACKING SHEETS
145
450
230
80 128
100 80
320
300
200
560
65 65
75
GROUND PLATES A
D
Mass plates equipped with nuts and bolts.
Earthing devices
B
Porous bronze.
Essential to acquire appropriate mass to
install electronic devices.
C
585
LIFEJACKETS MB 100N
The Besto MB is designed for use and easy storage on board of passenger ships/ferries on inland
waters. This simple jacket was not designed for extended wearing, but exclusively for emergency
situations. Thanks to the convenient waist strap, the Besto MB 100N is a fast-donning lifejacket: easy
to put on and take off. All sizes are designed with Fluorescent Orange High Visibility outer fabric,
signalling whistle and reflective material applications for quick recognition and rapid rescuing in case
of emergency. Easy to stow as a square package. Fabric: 100% Polyester High Visible EN471. Meets
ISO 12402-4 and CE EN395.
Buoyancy Material Navig. area Weight Model
Ref.: 065002 50 100% Poly. 5, 6 and 7 30-40 kg. Junior
Ref.: 065003 100 100% Poly. 5, 6 and 7 +40 kg. Adult
Ref.: 065005 150 100% Poli. 2, 3 and 4 +70 kg. Adult
Ref.: 065004
LIFEJACKETS BB 100N
The Besto BéBé Lifejacket offers your baby or toddler optimal protection at or on the water. This
vest is filled with comfortable, supersoft foam. The fastening is located at the back to prevent your
child from opening the vest. In addition, it has a collar fastening to prevent your child’s head from
slipping through the vest. An adjustable leg strap offers the perfect body fit and extra safety without
obstructing movement. The collar is provided with a strap that offers more grip for companions. The
strap on the backside of the biggest size offers the possibility to attach a safety line. This jackets has
an open backside, that makes the jacket extremely comfortable to wear on hot summer days. Meets
Lifejackets
586
LIFEJACKETS TURN SAFE 150N
The Besto Turn Safe Lifejacket is fully approved according the new ISO 12402-3 level 150N and
according the new testing (12402-9) and material (12402-7) requirements that will change lifejacket
performance, which makes a new era in lifejacket design and will give the best performances for
you and your Child. Grab loop on collar. Retro Reflective tapes 150N - 300 cm2. High Buoyancy
collar to support head. Rigid foam construction for better Turning Force. Adjustable chin strap for
optimizing face angle and freeboard. High Buoyancy Single Chest block construction improves in
water performance. Easily adjustable belt and strong NEXUS buckle. Durable 100% High-Vis PES
outer clothing. Securely fastened whistle. Double Crotch Strap or Nappy.
587
SOLAS SAFETY LIGHTS FOR LIFEJACKETS
Automatic light, it turns ON when immersing. Light Light is constructed for easy attachment and
is constructed for easy attachment and replacement. replacement. Batteries are lithium type. Min. light
Batteries are lithium type. intensity: 0,75 cd. Min light duration: 8 hours.
Dimensions: 50x25x42mm. Battery Life: 5 years.
SOLAS LIFERAFTS
Ref.: 065070
588
SEAFIRE FM200 AUTOMATIC EXTINGUISHERS - NON-RECHARGEABLE
Automatic extinguisher FM200 GAS SERIES FG, non-rechargeable.
Automatic: triggered by high temperature bulb at 93ºC.
Includes: Extinguisher bracket, discharge pressure switch, instructions plate with discharge LED alarm.
589
SEAFIRE FM200 FT STINGER EXTINGUISHERS WITH FIRETRACE TUBE
Automatic extinguisher FM200 GAS with sensor tube FIRETRACE type. Automatic: triggered by
high temperature at 79ºC. Tube opens as a nozzle on the high temperature area and the gas is
discharged. Perfect for server racks, telecommunications, machinery... Includes: Extinguisher
bracket, sensor tube, discharge pressure switch and instructions plate with discharge alarm
LED.
Model Volume (m3) kg. of FM200 Hose length m
Ref.: F50025 FT25 0,7 0,56 3
Ref.: F50050 FT50 1,4 1,13 3
Ref.: F50100 FT100 2,8 2,26 4,5
Ref.: F81002 2 kg
Ref.: F81006 6 kg
Ref.: F81009 9 kg
EXTINGUISHERS BOX
CABLES WITH HANDLE
For 2Kg extinguisher.
Dimensions: 484 x 204mm.
Extinguishers
590
NOZZLE DIFFUSER 25MM
Ideal for light work, fire hydrants in buildings, commercial and industrial
premises, forest fires, nautical, etc...
With Barcelona fitting.
Thread
Ref.: FLANA25 1”
Thread
Ref.: FLANA45 1 1/2”
Ø
Ref.: FMAB2515A 25
Ref.: FMAB4515A 45
HOSE
Nozzle diffusers
Ø
Ref.: FMAN25 25
Ref.: FMAN45 45
591
BARCELONA FITTINGS
Hose fittings
Ø Material
Ref.: FRAB25M 25 Aluminium
Ref.: FRAB45M 45 Aluminium
Ref.: FRBB25M 25 Brass
Ref.: FRBB45M 45 Brass
Ø Thread Material
Ref.: FRBA45R 45 1 1/2” Aluminium
Ref.: FRBB45R 45 2” Brass
Ø Thread Material
Ref.: FRA45M11/2 45 1 1/2” Aluminium
Ref.: FRAB25R 25 1” Aluminium
Ref.: FRAB45R 45 1 1/2” Aluminium
Ref.: FRBB25R 25 1” Brass
STORZ FITTINGS
Hose fittings.
Ø L W Material
Ref.: FRBC52M 52 90 66 Brass
592
FIRESTOP FIRE DETECTION CONTROL PANEL
DISPLAY PANEL
Display panel for two detection zones: engine and accommodation. This weatherproof display
gives status indication of all alarms and allows for system control. Display is connected to the
control unit via CAT5 cable, and up to 4 displays can be fitted to each system.
CONTROL UNIT
Microprocessor Control Unit is the heart of the integrated system. 7 relays (rated at 16 amps
each) provide for machinery shutdown when the Control Unit detects that Sea-Fire extinguisher
has discharged. For security, the Control Unit is powered by two independent power supply units.
Each power input is monitored for failure. A discharge event will trigger the machinery shutdown.
All primary inputs are monitored for open and short circuit. 2 Detection circuits, 1 discharge
pressure input, 2 Low pressure inputs. Alarm Output: 1 amp max. Vent solenoid: 2 amps for 5
seconds on system discharge. Machinery Shutdown Relays: 7 rated @16 amps. Adapter Panel
Reset Relays: 1 rated @16 amps.
EXPANSION MODULE
Adapter Unit is used to expand the number of Detection Zones. Each adapter unit expands the
system by a further 4 zones. Up to 4 of these units can be connected to increase the number of
Zones to 16. RJ45 sockets output the detector status to the Display Panel.
Description
Signaler panel Ref.: F91529 Fire detection system zone identification is
provided. Provides system status to the user and
Central unit Ref.: F92104P
has two tactile buttons for system control. In the
Detection switch Ref.: F96680 event of system alarm, a zone LED will illuminate
Connection cable 3m Ref.: F98010 and an internal audible warning.
Connection cable 5m Ref.: F98014
MARINE DETECTORS
Fire detection
American Bureau of Shipping, Germanischer Lloyd´s Register, Maritime & Coastguard Agency, Det Norske Veritas
and RSMS approvals. Compatible with all conventional centrals from 8,5 to 30V. With LED that change colour
depending on the status: dirt, fail or test mode.
Description
Optical smoke detector Ref.:F92001H
Heat detector 65º Ref.: F92065
Heat detector 80º Ref.: F92080
593
FIRE PORTS
Up to 14 compartments inside. 2 big and 8 small dividers that allows adapting the compartments dimensions to your
needs. It has 2 protective transparent plastic covers that prevent the products from falling and being mixed. Ergonomic
handle and an accessory hanger, screws and plugs for wall placement. Double-Pressure closure system (by turn
coupling). Insulation rubber around the inside perimeter of the kit, to ensure perfect seal. Possibility of customization in
silkscreen or label depending on quantities. For more information consult conditions. Individually packed by shrink film.
Biodegradable maintenance and cleaning products. Wide range for all boat zones such as interiors, exteriors, metals, mats, canvas,
bilges…
Ref.: 020173
750ml
Ref.: 020162 1L Ref.: 020159 750mL 12Kg
Ref.: 020163 5L Ref.: 020161 25L Ref.: 020174
594
Our professional cleaning line is ideal for the everyday and professional user.
A simple yet effective cleaning collection, consistion of brushing-, washing-, scrub- and drying-products that can be deployed anywhere
in combination with the telescopic poles.
Length
EXTRA SOFT Ref.: 060500
91-182cm Ref.: 060530
SOFT Ref.: 060501 Aluminium
152-274cm Ref.: 060531
MEDIUM Ref.: 060502
SWIVELPLATE WASHMITT
To hold scrubpads.
595
Index
A Anchor-roll............................................................................ 6
Anchors............................................................................. 3-5
Accessories and spare parts for electric engines............... 432
Anode gasket.................................................................... 585
Accessories and spare parts for flaps......................... 472-473
Anode screws................................................................... 584
Accessories and spare parts for fuel filters........................ 504
Anodes...................................................................... 525-584
Accessories and spare parts for level senders........... 482, 492
Anodes: Aluminium................................................... 572-584
Accessories and spare parts for remote control................. 464
Anodes: Arneson (Zn)................................................ 565-566
Accessories and spare parts for water strainers.......... 177-179
Anodes: Bolts for cooling systems (Zn)....................... 569-571
Accessories for batteries................................................... 277
Anodes: Bukh (Zn)........................................................... 565
Accessories for cookers and grill....................................... 114
Anodes: Collar for shafts (Al)............................................. 572
Accessories for fuel tanks................................................. 495
Anodes: Collar for shafts (Zn)..................................... 527-528
Accessories for gas struts.................................................. 263
Anodes: Cooling systems (Zn).................................... 569-571
Accessories for hatches...................................................... 62
Anodes: Disc (Al)....................................................... 572-573
Accessories for horns........................................................ 339
Anodes: Disc (Zn)...................................................... 534-536
Accessories for livejackets................................................. 588
Anodes: Disc for cooling systems (Zn)............................... 569
Accessories for mechanical steerings................................ 453
Anodes: Fish (Al)...................................................... 573, 575
Accessories for mooring systems......................................... 30
Anodes: Fish (Zn)..................................................... 538, 540
Accessories for tables......................................................... 85
Anodes: Honda (Al).......................................................... 577
Accessories for water tanks............................................... 169
Anodes: Honda (Zn)......................................................... 542
Accessories for windlasses............................................. 21-22
Anodes: Honda/Mercury/Mercruiser (Al)........................... 577
Accessories for wipers................................................ 351-353
Anodes: Honda/Yamaha (Al)............................................. 577
Accessories, fittings and spare parts for hydraulic steerings.447
Anodes: Lombardini (Zn).................................................. 565
Accumulator tanks............................................................ 147
Anodes: Mercury/Mercruiser (Al)................................ 577-579
Acustic isolators................................................................ 511
Anodes: Mercury/Mercruiser (Zn)............................... 543-547
Air purifying...................................................................... 115
Anodes: OMC (Al)...................................................... 579-580
Air-only............................................................................... 74
Anodes: OMC (Zn)..................................................... 547-549
Alarms and sensors for bilge...................................... 126-127
Anodes: OMC/Suzuki (Zn).......................................... 549-550
Alarms and switches for bilge pumps................................ 126
Anodes: Plates and bars (Al)...................................... 573-575
Alarms with sound and light.............................................. 593
Anodes: Plates and bars (Zn)..................................... 536-539
Alcohol and electric cookers............................................. 112
Anodes: Propellers (Zn)............................................. 528-534
Alcohol cookers................................................................ 112
Anodes: Renault (Zn)................................................. 564-565
Aluminium deck plates....................................................... 73
Anodes: Selva (Zn)..................................................... 562-563
Aluminium profiles for LED strips...................................... 425
Anodes: Suzuki (Zn).................................................. 550-551
Ampmeters........................................................ 327-330, 476
Anodes: Tohatsu (Zn)....................................................... 551
Anchor: Boss Manson........................................................... 5
Anodes: Volvo (Al)...................................................... 581-583
Anchor: Bruce...................................................................... 4
Anodes: Volvo (Zn)..................................................... 552-555
Anchor: Danforth.................................................................. 4
Anodes: Volvo/OMC (Al).................................................... 582
Anchor: Delta........................................................................ 4
Anodes: Volvo/OMC (Zn)................................................... 553
Anchor: Fortress................................................................... 3
Anodes: Waterjej Kamewa (Zn).................................. 566-567
Anchor: Guardian................................................................. 3
Anodes: Waterjet Castoldi (Zn).......................................... 568
Anchor: Folding anchors....................................................... 4
Anodes: Waterjet Hamilton (Zn)........................................ 567
Anchor: Supreme Manson.................................................... 5
Anodes: With welding plate (Al).................................. 575-576
Anchor swivels.................................................................... 25
Anodes: With welding plate (Zn)................................. 540-541
Anchor:Ultra Anchor............................................................. 4
Anodes: With wire (Zn)..................................................... 542
Anchoring buoy.................................................................... 6
Anodes: Yamaha (Al)................................................. 583-584
Anchoring line indicators..................................................... 23
Anodes: Yamaha (Zn)................................................ 556-561
Anchoring springs......................................................... 25, 27
Anodes: Yanmar (Zn)........................................................ 564
Anodes: ZF-MPM (Zn)...................................................... 563 Buzzer with light............................................................... 482
Anodes: Zinc............................................................. 525-571 Buzzers............................................................................ 482
Antenna............................................................................ 431
Antenna holders......................................................... 48, 431 C
Assited hydraulic steering................................................. 449 Cabin hooks........................................................................ 72
Audio......................................................................... 428-430 Cabin lights................................................................ 378-389
Audio amplifier................................................................. 429 Cable clamp..................................................................... 321
Automatic flaps control..................................................... 471 Cable glands..................................................................... 326
Axial fans.......................................................................... 524 CAN-BUS Powerplex.................................................. 332-333
Centrifugal blowers........................................................... 523
B Centrifugate electric pump................................................ 137
Ball locks.......................................................................... 238 Certificated fire hoses........................................................ 591
Barcelona fittings for hoses............................................... 592 Chafe protection................................................................... 9
Bascket for fenders............................................................. 31 Chain.................................................................................. 13
Bath deck stairs............................................................. 54-55 Chain holders................................................................... 270
Battery alternators............................................................. 286 Chain stoppers.................................................................... 20
Battery boxes.................................................................... 277 Charge managements....................................................... 282
Battery charguers...................................................... 286-289 Charguer sockets.............................................................. 322
Battery holders................................................................. 277 Chart table lights........................................................ 396-397
Battery inverters................................................................ 286 Circuit breacker holders..................................... 291-296, 309
Battery isolators................................................................ 286 Circuit breackers........................................................ 309-316
Battery maintenance......................................................... 276 Clamps..................................................................... 171, 506
Battery poles..................................................................... 277 Clamps for brackets.......................................................... 506
Battery poles cover........................................................... 277 Cleaning kit....................................................................... 595
Battery switch.................................................... 278-281, 283 Cleaning products...................................................... 594-595
Bearings.................................................................... 518-519 Clear view screen.............................................................. 351
Bell for acustic signals...................................................... 339 Cleats............................................................................ 37-38
Bilge cleaner............................................................. 120, 594 Coasters.............................................................................. 48
Bilge floatble switch.......................................................... 126 Coffeemachines................................................................ 119
Binoculars........................................................................ 107 Comando kit with Guardian anchor....................................... 3
Biocides............................................................................ 508 Compasses................................................................ 103-107
BioSok.............................................................................. 120 Cone clutches..................................................................... 21
Blowers...................................................................... 520-524 Confortseat......................................................................... 82
Bollards.............................................................................. 39 Connection bar.......................................................... 316-320
Bolt latches................................................................ 240-241 Connection boxes............................................................. 321
Bonding synthetic teak........................................................ 58 Cookers..................................................................... 108-114
Booster............................................................................. 287 Cooling system spare parts............................................... 190
Bow rollers.......................................................................... 24 Courtesy lights........................................................... 398-400
Bracket bases..................................................................... 52 Crushing locks.................................................................. 231
Bronze bearings......................................................... 518-519
Bronze lid................................................................. 174, 175 D
Brushes............................................................................ 595 Damping hinges................................................................ 220
Bulbs......................................................................... 418-423 Deck floodlights................................................. 410, 412-414
Bulbs B22................................................................. 420-421 Deck plates.............................................................. 70-71, 73
Bulbs BA15...................................................................... 420 Deck rail............................................................................. 55
Bulbs BAY15.................................................................... 420 Deck seats..................................................................... 82-83
Bulkhead outlet................................................................ 302 Deck shower water outlet.................................................. 154
Buttons............................................................................. 301 Deck washing kit............................................................... 139
Buttons and keys....................................................... 297-301 Deck washing soap........................................................... 594
Deckfiller....................................................................... 42-45 Fire detection central........................................................ 593
Derust............................................................................... 594 Fire extinguishing....................................................... 589-592
Dimmers.................................................................... 426-427 Fire fighting............................................................... 589-594
DIN radio cover................................................................. 430 Fire fighting hose fittings................................................... 592
Dock outlet................................................................ 323-325 Fire isolators..................................................................... 511
Dock power wire............................................................... 323 Fire ports for engine room................................................. 594
Dock power wire Marinco type.......................................... 324 Fire ventilation grille.......................................................... 523
Dock water outlet.............................................................. 154 First-aid kit for 1-5 areas................................................... 594
Door holder.................................................265-266, 268-270 Fittings for hoods........................................................... 78-79
Door stoppers................................................................... 222 Fittings for outboard engines............................................. 507
Drain pipe.................................................................. 181-182 Fixed fuel cleaning system................................................ 509
Drain plugs....................................................................... 182 Flags................................................................................... 49
Drainage pipe................................................................... 181 Flaps......................................................................... 468-473
Drawer slides............................................................. 224-225 Flaps control panel........................................................... 472
Drivers.............................................................................. 427 Flexible water tanks.................................................. 169, 494
Floatable rope for life rings................................................ 588
E Floodlights................................................................. 410-417
Earthing assembly for shafts............................................. 585 Fluorescent light........................................................ 404-407
Elastic locks............................................................... 226-227 Flush handles................................................................... 228
Electric engines................................................................ 432 FM, USB, Bluetooth radio................................................. 428
Electric engines for windlasses............................................ 21 Folding buckets................................................................ 595
Electric lifts....................................................................... 267 Folding cleats..................................................................... 38
ELECTRICAL, LIGHTING AND ELECTRONIC.............. 276-431 Folding hangers......................................................... 274-275
Electrohydraulic pump for flaps......................................... 473 Folding holders.......................................................... 264-265
Electromechanical lifts...................................................... 267 Folding rings....................................................................... 41
Electronic bilge pumps............................................... 121-125 Folding water taps............................................................. 148
Electronic pressure pumps................................................ 138 Footboards.......................................................................... 53
Embeddable containers...................................................... 47 Fortress anchors stockage bags............................................ 3
ENGINE ENVIROMENT.............................................. 432-524 Friction hinges.................................................................. 220
Evaporators....................................................................... 118 Fridge groups................................................................... 118
Exhaust hoses................................................................... 496 Fridge power converter..................................................... 117
Extensible bar for closets.................................................. 271 Fridges...................................................................... 116-117
Extinguisher boxes............................................................ 590 Fuel catalyst..................................................................... 508
Extinguisher holders.......................................................... 590 Fuel conditioner................................................................ 508
Extinguishers............................................................. 589-590 Fuel filters.................................................................. 500-505
Extractor/Blowers...................................................... 522, 524 Fuel hoses................................................................. 496-498
Eyebolts.............................................................................. 41 Fuel hoses for outboard engines....................................... 498
Fuel tanks......................................................................... 495
F Fuse.......................................................................... 303-307
Fastmount................................................................. 194-199 Fuse holders.............................................................. 303-309
Fastmount panel mounting system............................. 194-199
Fender covers................................................................ 31-32 G
Fender holder.......................................................... 33, 41-42 Gas alarms....................................................................... 593
Fender hooks...................................................................... 27 Gas coockers with oven.................................................... 109
Fenders......................................................................... 31-33 Gas cookers............................................................... 108-110
Festoon bulbs................................................................... 419 Gas horns......................................................................... 339
Filling and puring of hydraulic systems............................. 449 Gas struts.................................................................. 262-264
Filters for bilge pumps...................................................... 133 Gas struts for flaps............................................................ 472
Fire detection.................................................................... 593 Gauges.......................................................474-479, 487-491
Gauges: Ampmeter............................................ 327-330, 476 Hoses with pump for outboard engine............................... 507
Gauges: Clock................................................................... 476 Hot water hoses................................................................ 498
Gauges: Fuel level..................................................... 475, 490 Hull windows...................................................................... 66
Gauges: Hour counter....................................... 476, 488, 490 Hydraulic steering...................................................... 433-449
Gauges: Navigation lights.................................................. 479 Hydraulic steering kit................................................. 448-449
Gauges: Oil pressure......................................... 478, 488, 491 Hydraulic steering station hoses........................................ 449
Gauges: Oil temperature........................................... 478, 488 Hydrocarbon eliminator..................................................... 120
Gauges: Pirometer............................................................ 478
Gauges: Revolution counter.......................474, 487-489, 490 I
Gauges: Rudder angle...................................... 477, 487, 491 Ignition cut-off.................................................................. 285
Gauges: Speedometer............................................... 474, 487 Ignition keys..................................................................... 285
Gauges: Tachometer......................................................... 488 Impeller pumps................................................. 140, 184-185
Gauges: Trim............................................................ 478, 491 Impellers.................................................................... 191-193
Gauges: Voltimeter.............................327-330, 476, 488, 490 In line blower.................................................................... 520
Gauges: Waste water level......................................... 475, 490 Inboardengine hydraulic cylinders.............................. 436-446
Gauges: Water level.................................................. 475, 490 Incandescent bulbs................................................... 419-423
Gauges: Water temperature............................... 478, 488, 491 Inflatable fenders................................................................ 35
Gear pumps............................................................... 186-187 INTERIOR AND CABIN EQUIPMENT........................... 92-275
Generators........................................................................ 354 Ipod, Iphone connection wire............................................ 430
Glass-ceramic hob coocker................................ 111, 113-114 Ipod, Iphone, MP3 box..................................................... 430
Grills......................................................................... 110, 114 Isolators..................................................................... 510-511
Ground plates................................................................... 585
Guides and wheels for sliding doors.................................. 261 J
Gypsies............................................................................... 21 Jibs..................................................................................... 50
Jockey seat......................................................................... 91
H Joystick............................................................................. 301
Halogen bulbs.......................................................... 419, 421
Hand bilge pump spare parts..................................... 130-131 K
Handle fuel pump for outboard engines............................ 507 Key holes.......................................................................... 260
Handles.............................................................................. 21
Handles...................................................................... 53, 272 L
Handrail holders......................................................... 53, 272 Latches............................................................................. 239
Hangers..................................................................... 274-275 Latches...................................................................... 239-241
Hatchery pumps............................................................... 122 LED bar..................................................................... 423-425
Hatches..............................................................60-63, 67-69 LED bulbs.................................................................. 418-422
Hawsepipe.......................................................................... 36 LED strips.................................................................. 423-425
Helicoidal blowers............................................................. 522 Level senders..................................................... 480-481, 492
Hinchadores....................................................................... 35 Level senders for fuel tanks................................ 480-482, 492
Hinges....................................................................... 201-223 Level senders for waste water tanks.......................... 482, 492
Hinges for folding beds..................................................... 223 Level senders for water tanks............................. 480-481, 492
Hinges for glass doors....................................................... 222 Life jacket light.................................................................. 588
Holders.......................................................................... 48-50 Life jackets................................................................ 586-587
Hoods and fittings.......................................................... 77-79 Life lines........................................................................... 588
Hook holders...................................................................... 48 Life ring............................................................................ 588
Hooks................................................................................. 32 Liferaft.............................................................................. 588
Horizontal wipers.............................................................. 350 Lighting...................................................................... 378-427
Horn compressor...................................................... 334, 337 Lip seals with box............................................................. 515
Horns........................................................................ 334-339 Lock handles.................................................................... 259
Hoses........................................................153, 170, 496-498 Lock latches..................................................................... 227
Lock strikers..................................................................... 248 Outboard holders................................................................ 50
Lock with press button............................................... 235-237 Oven................................................................................. 109
Locks......................................................................... 228-260 Oxigenators....................................................................... 124
Locks for furnitures........................................................... 238
Locks for glove boxes........................................................ 235 P
Locks for sliding doors............................................... 243-245 Panel LED lights................................................................ 296
Locks with button.............................................................. 234 Padlocks.................................................................... 260-261
Locks with handle...................................................... 229-233 Panels and buttons.................................................... 290-299
Locks with tensor....................................................... 226-227 Phenolic bearings............................................................. 518
Pirometer sensor....................................................... 478, 492
M Plate flaps.................................................................. 470-473
Macerator pumps............................................................. 162 Plates for flaps.................................................................. 473
Magnetic door holder................................................. 268-270 Plates for handles...................................................... 259-260
Magnetothermal switch..................................................... 312 Plumbing 15 system.................................................. 156-157
MAITENANCE AND SAFETY...................................... 525-595 Plumbing fittings........................................................ 174-175
Manual and electric capstans............................................. 81 Pole bases.......................................................................... 49
Manual bilge pumps.................................................. 127-132 Pontoon screws.................................................................. 30
Manual self-priming pumps.............................................. 132 Portable fuel tank cleaning system............................. 508-509
Marine sensors................................................................. 593 Portlights....................................................................... 64-66
Mast lights................................................................. 409-410 Pot holders............................................................... 111, 114
Mattress base................................................................... 102 Potable water filter............................................................ 154
Mechanical steering................................................... 450-452 Power cords guide............................................................ 325
Mechanical steering boxes......................................... 450-452 Power outlet...................................................................... 322
Mechanical steering cables........................................ 450-452 Pressure button................................................................ 148
Megaphone................................................................ 335-336 Pressure electronic controller............................................ 145
Membrane panels............................................................. 296 Pressure groups......................................................... 143-146
Microphones..................................................................... 335 Pressure pumps........................................................ 143-144
Mooring ropes.................................................................... 7-8 Pressure regulator for showers.......................................... 154
Mooring springs............................................................ 25, 27 Pressure sensor........................................................ 486, 493
Mooring system............................................................. 26-30 Pressure sensor........................................................ 486, 493
Mop.................................................................................. 595 Pressure switch kit for pumps........................................... 143
Multipurpose cleaner........................................................ 594 Propeller protector..................................................... 512-513
Multipurpose pumps.................................................. 134-141 Proteflex........................................................................... 325
Pulley pumps.................................................................... 136
N Pumps control panel......................................................... 145
Navigation lights........................................................ 355-377 Pumps for cooling system.......................................... 188-190
Navigation lights control system........................................ 366 Pumps for hydraulic steerings.................................... 433-435
Navigation lights switch..................................................... 292 PVC deck plates............................................................. 70-71
NMEA 2000...................................................................... 489 PVC deck rails............................................................... 56-57
Non-return valves............................................................. 170
Nozzle diffusors................................................................ 591 R
Racing ropes................................................................. 10-12
O Radar reflectors............................................................. 80-81
Oil change system............................................................. 135 Radial fans....................................................................... 524
Oil pumps......................................................................... 135 Radio................................................................................ 428
Oil temperature sensor....................................... 483-485, 493 Radio antenna.................................................................. 430
Onesailor....................................................................... 26-30 Radio remote control......................................................... 429
Outboard engine anti-theft................................................ 432 Radio remote control adaptor............................................ 428
Outboard engine water outlet............................................ 432 Reductions....................................................................... 175
Relay.................................................................. 22, 282, 284 Sinks................................................................................ 155
Relay boxes........................................................................ 22 Slides and accessories for seats.......................................... 91
Relay switch..................................................................... 284 Sliding roof hatches............................................................ 63
Remote battery switch....................................................... 287 Sliding seat rails................................................................ 101
Remote control for engines............................................... 465 Smoke alarms................................................................... 593
Remote control wire................................................... 461-464 SOLAS floatable light......................................................... 588
Remote control wire for extinguishers................................ 590 Spare lip seals.................................................................. 515
Remote controls......................................................... 458-461 Speakers.................................................................... 429-430
Retractable cleats............................................................... 38 SPIN-ON fuel filters........................................................... 500
Retractable water taps...................................................... 148 Splicing kit.......................................................................... 11
RGB controller for LED strips............................................ 427 Spotlights................................................................... 390-396
RIBs holder........................................................................ 50 Stabilising foils.................................................................. 473
Rod holders........................................................................ 51 Steering wheel........................................................... 453-457
Rode counters.................................................................... 23 Steering wheel handles..................................................... 457
Rope cutter for propeller shafts......................................... 517 Steering wheels................................................................. 457
Rope guide.................................................................... 39-40 Storz fitting for hoses........................................................ 592
Rope reel.............................................................................. 6 Stroboscope bulbs............................................................ 421
Ropes.............................................................................. 6-12 Submarine lights........................................................ 402-403
Rubber bearings............................................................... 518 Subwoofers....................................................................... 429
Rudder angle sensor......................................... 477, 487, 492 Suction strainers............................................................... 176
Suction strainers for bilge.................................................. 183
S Sumersible pumps............................................................ 148
Safety and rescue...................................................... 586-588 Switch for bilge pumps.............................................. 126-127
Sanitary and waste water hoses................................. 170, 498 Swiveling switch................................................................ 290
Sanitary pumps.......................................................... 159-162 Swivelling head for cleaning.............................................. 595
Sccuper............................................................................ 181 Swivelling rails.................................................................. 225
Screen flaps............................................................... 468-469 Swivels and shackles.......................................................... 25
Screw nipples................................................................... 174
Scrubpads........................................................................ 595 T
Searchlights............................................................... 412-417 Table pedestals.............................................................. 84-85
Searchlights............................................................... 415-417 Tables................................................................................. 85
Searchlights............................................................... 415-417 Tank vents.......................................................................... 46
Seat pedestals............................................................... 90-91 Teak cleaner..................................................................... 594
Seat rest............................................................................. 83 Tef-Gel.............................................................................. 200
Seats for inside and bridge........................................... 92-101 Telescopic handle............................................................. 595
Seats for outside............................................................ 86-91 Temperature sensor........................................... 483-485, 493
Self-priming pumps................................................... 136-137 Temperature, smoke and gas sensors............................... 593
Service kit for windlasses.................................................... 21 Termichal circuit breacker.................................................. 22
Shackles............................................................................. 25 Termichal isolators............................................................ 511
Shaft seals................................................................. 514-515 THE BOAT OUTSIDE....................................................... 3-91
Ship´s compasses............................................................. 106 Three-way valves.............................................................. 173
Shower heads................................................................... 153 Thru-hulls.................................................................. 175,180
Shower hoses................................................................... 153 Thrustor..................................................................... 512-513
Shower spare parts.................................................... 152-153 Tikal................................................................................. 200
Showers..................................................................... 150-153 Toilets and accessories.............................................. 163-168
Shunts para amperímetros........................................ 330, 476 Transfer pumps................................................................ 141
Signal swiveling lights........................................................ 408 Trip hook for anchorage........................................................ 5
Silentblocks............................................................... 510-511 Turbine fuel filters...................................................... 501-505
Sink drain......................................................................... 155 U
USB outlet........................................................................ 322
USB, AUX-IN.................................................................... 430
V
Vaccum............................................................................ 119
Vacuum center................................................................. 119
Vacuum switch......................................................... 133, 143
Vacuum valves.................................................................. 170
Valves............................................................................... 173
Ventilation.............................................................. 74-76, 273
Ventilation grille..................................................... 75-76, 273
Ventilation hoses............................................................... 498
Ventilation shell................................................................... 76
VHF antenna.................................................................... 431
Vibration isolators....................................................... 510-511
Voltimeter..........................................327-330, 476, 488, 490
W
Waste water discharge kit.......................................... 158-159
Waste water tanks............................................................. 158
WatchingMan............................................................. 466-467
Water filters for pressure pumps....................................... 147
Water fittings..................................................................... 172
Water heaters................................................................... 147
Water hoses...................................................................... 170
Water mixers..................................................................... 151
Water pumps for deck-washing......................................... 138
Water separators........................................................ 500-505
Water strainers........................................................... 176-179
Water tanks.............................................................. 169, 494
Water tap................................................................... 148-150
Water temperature sensor.................................. 483-485, 493
Watertight deck plates......................................................... 71
Welding synthetic teak........................................................ 59
Winch................................................................................. 21
Windlasses..................................................................... 14-20
Windlasses controllers......................................................... 23
Wiper arms................................................341, 343-344, 349
Wiper blades...................................................... 343-344, 349
Wiper controls................................................................. 3553
Wiper engines.....................................340, 342-343, 346-348
Wiper switch..................................................................... 353
Wipers....................................................................... 340-352
Wipes............................................................................... 595
Wood seal......................................................................... 594
Work floodlights........................................................ 411, 414