Professional Documents
Culture Documents
Please cite this article as: Rafał. Moszczyński-Pętkowski, J. Majer, Mał. Borkowska, Ł. Bojarski,
S. Janowska, Mikoł. Matłoka, F. Stefaniak, D. Smuga, K. Bazydło, K. Dubiel, M. Wieczorek,
Synthesis and characterization of novel classes of PDE10A inhibitors - 1H-1,3-benzodiazoles
and imidazo[1,2-a]pyrimidines, European Journal of Medicinal Chemistry (2018), doi: 10.1016/
j.ejmech.2018.05.043.
This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to
our customers we are providing this early version of the manuscript. The manuscript will undergo
copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please
note that during the production process errors may be discovered which could affect the content, and all
legal disclaimers that apply to the journal pertain.
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
05-092 Łomianki, Poland
Keywords:
RI
PDE10A
1H-1,3-benzodiazoles
SC
Imidazo[1,2-a]pyrimidines
Abstract:
U
benzodiazole (III) and imidazo[1,2-a]pyrimidine (IV) backbones were designed and synthesized for
PDE10A interaction. Among these compounds, 1H-1,3-benzodiazoles and imidazo[1,2-a]pyrimidines
AN
showed the highest affinity for PDE10A enzyme as well as good metabolic stability. Both classes of
compounds were identified as selective and potent PDE10A enzyme inhibitors.
M
1. Introduction
Phosphodiesterase 10A (PDE10A) is an enzyme from the phosphodiesterases family with highly
D
specific expression in the striatum [1], the part of basal ganglia having various functions involved
in control of motor movement, cognitive processes, emotions and learning [2]. PDE10A
hydrolyzes both cAMP and cGMP in the striatal neurons and regulates throughout stratonigral
TE
(direct) and stratopallidal (indirect) pathways in the brain. Activation of these pathways has
opposite output effects leading to activation or inhibition of thalamus circuits [3]. In the
stratopallidal pathway, inhibition of the PDE10A leads to diminishing of the D2 activation
signalling in contrast to the stratonigral pathway, where inhibition of the PDE10A result in
EP
mimicking the D1 signalling [4]. Balance between these two circuits plays essential function in
controlling motor and executive functions [5]. Therefore cyclic nucleotides level modulation in this
neurons can be advantageous in several disorders connected to the basal ganglia system,
including psychotic, neurological and cognitive functions disorders, for example such as
C
In recent years numerous companies have reported PDE10A inhibitors from different chemical
groups [8-10]. Among them Lundbeck in a series of patent applications [11-14] presented novel
classes of compounds as potential antipsychotic agents, where these derivatives are described to
have PDE10A potencies of <50 nM and potent in vivo activity measured by the reversal of PCP
induced hyperactivity. These compounds are certainly selectivity pocket binders, with crucial
interactions with Tyr 683 and Gln 716 within the PDE10A enzyme [15]. Their structure was derived
from benzodiazole derivative (Fig.1) which was selected on the basis of HTS-screening [16]. Further
optimization of benzodiazole HTS hit led to compound LuAE90074, which incorporated 4-
phenylimidazole moiety as most crucial fragment for PDE10A interaction (IC50 = 67 nM). (Fig.1). The
important feature of molecules developed by Lundbeck within this chemical class was the presence of
5,7-dimethyl-[1,2,4]triazolo[1,5-a]pyrimidine and 5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazine moieties
(HET1) which were responsible for selectivity of obtained compounds toward PDE10A and were
optimized in terms of metabolic stability [16].
*Corresponding author. Tel.:+48 882149529 E.mail address: rafal.moszczynski@celonpharma.com
ACCEPTED MANUSCRIPT
Subsequently, in the period between 2012-2013 Bristol Myers Squibb published a series of patent
applications concerning the compounds of similar structure and significant potency toward PDE10A
[17,18]. The BMS’s compounds incorporated initially a cyclopropane ring instead of the 4-
phenylimidazole moiety in LuAE90074 [17]. During further development cyclopropane was replaced
with a bicyclic scaffold of imidazo[1,2-a]pyridine, while keeping the critical nitrogen N(1) atom in the
central bicyclic core responsible for interaction with Tyr683 [18] (e.g., the most potent, Example 1a,
IC50 = 37 nM) (Fig.1). Since the initial publication of the structures by BMS in patent application [18]
there was neither literature available about the further development of these compounds nor
biological data concerning their in vitro and in vivo activity.
PT
RI
U SC
AN
M
D
TE
EP
Figure 1. Structure of PDE10A inhibitors (Lundbeck LuAE90074 and BMS’s Example 1a [18])
Thus in the frame of our research, considering Example 1a [18] as model compound, four different
C
planned also to make use of three different HET1 moieties (HET1-1: 5,8-dimethyl-[1,2,4]triazolo[1,5-
a]pyrazine, HET1-2: 5,7-dimethyl-[1,2,4]triazolo[1,5-a]pyrimidine and HET1-3: 4-methylquinazoline) to
check the influence of these motifs on the potency, selectivity over other PDE’s and metabolic
stability. As for HET2 moiety we decided to check the influence of different fragments (e.g. 5, 6, 10-
membered rings) as well as different substituents on PDE10A inhibition activity. In this paper we
report the synthesis and biological evaluation of novel 1H-1,3-benzodiazole and imidazo[1,2-
a]pyrimidine derivatives.
2.1. Chemistry
ACCEPTED MANUSCRIPT
PT
RI
SC
Figure 2. Bioisosteric modification of the imidazo[1,2-a]pyridine core
U
The chemistry employed to prepare the [1,2,4]triazolo[1,5-a]pyridines (I) is outlined in Scheme 1.
For all synthesized compounds in this series the first three steps were common. In the first step,
AN
isonicotinic acid 1 was converted into methyl ester 2 [19] which was treated with amino 2,4,6-
trimethylbenzene-1-sulfonate [20] to give pyridinium salt 3. The subsequent condensation of 3 with
corresponding benzonitrile or pyrimidinecarbonitrile in refluxing ethanol afforded key intermediate,
methyl 2-aryl[1,2,4]triazolo[1,5-a]pyridine-7-carboxylate 4 [21]. Depending on the HET1 moiety, the
M
further synthetic routes for final compounds 7-12 were different. For compounds 9, 10 and 12, the 2-
aryl[1,2,4]triazolo[1,5-a]pyridine-7-carboxylate 4 was hydrolyzed to corresponding carboxylic acid 8a-
b [22], which was converted to final Compound 9 or 10 by refluxing with 1-amino-4,6-dimethyl-1H-
D
5 which was converted to aldehyde 6 via Swern Oxidation. Finally, the aldehyde 6 was reacted with
1-amino-2-imino-3,6-dimethyl-2,3-dihydro-1-pyrazinium diphenylphosphinate [23] in DMF to give
Compound 7 in 23% yield.
EP
For Compound 12, the carboxylic acid 8a was coupled with 1-(2-aminophenyl)ethanone in the
presence of HATU/DIPEA in DMF. The obtained amide intermediate 11 was then converted to 12 with
o
78% yield by heating with ammonia solution in ethanol at 130 C in a sealed vessel.
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
POCl3, reflux, 3h, 11- 20%; (vi) LiAlH4, THF, -40->10 C, 2,5h, 42%; (vii) (COCl)2, DMSO, TEA, DCM, -
o
78 C -> RT, 2,5h, 87%; (viii) 1-amino-2-imino-3,6-dimethyl-2,3-dihydro-1-pyrazinium
o
diphenylphosphinate, Na2S2O5, DMF, 50-80 C, 24h, 23%; (ix) 1-(2-aminophenyl)ethanone, HATU,
o o
DIPEA, DMF, 60 C, 18h, 36%; (x) NH3/MeOH, 130 C, 18h, 78%.
C
The syntheses of compounds 17 and 18, containing pyrazolo[1,5-a]pyridine scaffold are outlined in
Scheme 2. In the first step, condensation of ethyl benzoate 13 with 5-cyano-2-methylpyridine via
AC
PT
RI
U SC
AN
Scheme 2. Syntheses of new pyrazolo[1,5-a]pyridine analogues. Reagents and conditions: (i) 5-
M
o o
cyano-2-methylpyridine, LiHMDS, THF, -5 C->RT, 19h, 93%; (ii) Mes(SO2)-ONH2, DIPEA, DCM, 0 C-
o
>RT, 20h, 54%; (iii) DIBALH, DCM, -78 C->RT, 4h, 33%; (iv) 1-amino-4,6-dimethyl-1H-pyrimidin-2-
o
ylidene-ammonium diphenylphosphinate, Na2S2O5, DMF, 80 C, 22h, 7%; (v) 1-amino-2-imino-3,6-
o
D
Syntheses of novel 1H-1,3-benzodiazole analogues are depicted in Scheme 3. The main substrate,
TE
ethyl 3,4-diaminobenzoate 19 was reacted with carboxylic acid or aldehyde containing HET2 moiety
which can be aryl, heteroaryl or benzyl. The reactions of carboxylic acids of general formula
HET2COOH were carried out either in polyposphoric acid or phosphorus oxychloride [25]. Generally
reaction with POCl3 provided better yields of 1H-1,3-benzodiazole esters 20a-iv. The yields,
EP
depending on HET2 substituents varied between 13-85%. The reaction of aldehydes of general
fomula HET2CHO were performed either at RT with sodium metabisulfite in DMF (instead of heating
in EtOH-water, [26-28]) or in refluxing toluene [29] with catalytic amount of PTSA. The 1H-1,3-
benzodiazole esters 20a-iv were obtained in yields up to 88%. Intermediates 20a-iv were
C
subsequently hydrolyzed to corresponding carboxylic acids 21a-iv with good yields [30-31]. The acids
21a-iv were converted to final derivatives 22-24 and 26-53 via reactions with iminium salts [23] using
AC
coupling agents (HATU or EDCI-HOBt) in DMF. The N(3) and N(1) methylated derivatives were
obtained from compound 22 via methylation with MeI in basic conditions in DMF. The final
compounds 25a and 25b were separated via column chromatography.
ACCEPTED MANUSCRIPT
PT
RI
SC
Scheme 3. Syntheses of new 1H-1,3-benzodiazole analogues. Reagents and conditions: (i) HET2-
o
COOH, PPA, 140 C, 2h, 46-62% or (ii) HET2-CHO, Na2S2O5, DMF, RT, 20h, 25-38% or (iii) HET2-
o
CHO, PTSA, toluene, reflux, 20h, 9-88% or (iv) HET2-COOH, POCl3, 120 C, 3h, 4-88%; (v) MeOH,
U
o
NaOH aq., 60 C, 20h, 53-96%; (vi) 1-amino-4,6-dimethyl-1H-pyrimidin-2-ylidene-ammonium
o
diphenylphosphinate, HOBt, EDCI, TEA, DMF, RT, 48h, AcOH, 100 C, 24h, 30% or (vii) 1-amino-4,6-
AN
dimethyl-1H-pyrimidin-2-ylidene-ammonium diphenylphosphinate, POCl3, reflux, 3h, 18%; (viii) 1-
amino-2-imino-3,6-dimethyl-2,3-dihydro-1-pyrazinium diphenylphosphinate, HATU, DIPEA, DMF, RT,
48h, 16-74%; (ix) MeI, K2CO3, DMF, 24h, 48%; (x) MeI, K2CO3, DMF, 24h, 56%.
M
o
methanol at 140 C in an autoclave [32]. The dinitro compound 56 was then reduced with hydrogen on
palladium and obtained diamine 57 was directly reacted with benzaldehyde in the presence of sodium
TE
PT
RI
U SC
Scheme 4. Synthesis of compound 58. Reagents and conditions: (i) (COCl)2, DCM/DMF, RT, 2h, 1-
o
(2-aminophenyl)ethanone, TEA, THF, 18h, 74%; (ii) NH3/MeOH, 140 C, 5h, 93%; (iii) Pd/H2,
AN
o
AcOEt/EtOH, RT, 24h, not isolated; (iv) PhCHO, Na2S2O5, DMF, 100 C, 20 h, 24%.
substituted or unsubstituted HET2 group in yields up to 90%. In the next step, the derivatives 60a-j
were converted in the presence of an excess of DMA-DMF acetal in DMF to corresponding
ethenamines 61a-j in yields up to 90% [34,35]. The ethenamines 61 were subsequently reacted with
D
sodium periodate in water-THF mixture to give corresponding aldehydes 62a-j in yields up to 67%
[36-37]. In the last step the aldehydes 62 were reacted either with pyrazinium salt in toluene or 2-
TE
propanol, giving the final compounds 63-65 in yields up to 42% or with iminium salt delivering final
products 66-75 in yields up to 24%.
C EP
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
Scheme 5. Syntheses of new imidazo[1,2-a]pyrimidine analogues. Reagents and conditions: (i) HET2-
M
o o o
COCH2Br, EtOH, 80 C, 5h, 33-90% (ii) DMA-DMF, DMF, 140 C, 20h, 89%; (iii) NaIO4, THF/H2O 0 C,
5h, 28-67%; (iv) 1-amino-2-imino-3,6-dimethyl-2,3-dihydro-1-pyrazinium diphenylphosphinate,
o
toIuene/IPA, 80 C, 1,5 h, 5-42%; (v) 1-amino-4,6-dimethylpyrimidin-2(1H)-iminium
D
o
diphenylphosphinate DMF, 50-80 C, 4d, 1-24%.
as HET1 moiety is outlined in Scheme 6. In the first step ethyl vinyl ether 76 was reacted with ethyl
oxalyl chloride, affording oxoester 77 [38]. The ester 77 was further condensed with guanidinium
chloride giving aminopyrimidine derivative 78 [39]. Subsequent cyclization of 78 with
bromoacetophenone afforded imidazo[1,2-a]pyrimidine ester 79 which was further hydrolyzed to
EP
PT
RI
U SC
AN
M
o
D
Scheme 6. Synthesis of compound 82 .Reagents and conditions: (i) ethyl oxalyl chloride, 10 C, 24h,
o
25%; (ii) guanidinium chloride, propanenitrile, TEA, propionitrile, 100 C, 24h, 27%; (iii) 2-bromo-1-
o
phenylethanone, toluene, 110 C, 6h, 38%; (iv) LiOH*H2O, THF/MeOH, RT, 18h, 42%; (v) 1-(2-
TE
o
aminophenyl)ethanone, HATU, DIPEA, DMF, RT, 24h, 49%; (vi) NH3/MeOH, 100 C, 18h, 73%.
EP
The possible binding mode of compounds containing bicyclic scaffolds (I-IV) was examined by a
manual docking placement procedure into the PDE10A protein (PDB 3HQY) using AutoDockVina
[40]. On the basis of virtual docking we assumed that nitrogen N(1) in the central bicyclic core is
C
responsible for crucial hydrogen-bond interaction with Tyr683 in the PDE10A structure and functions
as hydrogen bond acceptor (substitution of nitrogen N(1) by methyl group suppresses PDE10A
AC
inhibitory activity for compound 25b) while the HET1 motif might occupy the clamp region and make π-
stacking interaction with Phe719 (Fig 3). Besides the nitrogen N(1) we also found the influence of
substituent in the HET2 moiety on inhibitory activity.
ACCEPTED MANUSCRIPT
PT
RI
SC
Figure 3. 3D representation of possible binding mode of Example 1a by BMS (yellow), Compound 26
U
(green) and Compound 66 (cyan) in the binding site of PDE10A enzyme (PDB ID 3HQY)
A library of compounds comprising four mentioned bicyclic scaffolds and three HET1 moieties has
AN
been prepared. The scaffolds I-IV comprising four different bicyclic systems were chosen using
“scaffold hopping” approach. Although the carbon-nitrogen swap in the central bicyclic core might
seem obvious, however the obtained in vitro data indicated strong relationship between scaffold type
and activity toward PDE10A (Tables 1-4). The obtained results showed that scaffolds possessing less
M
The compounds (Tables 1 and 2) containing scaffolds such as [1,2,4]triazolo[1,5-a]pyridine (I) and
D
pyrazolo[1,5-a]pyridine (II) were the least potent of all tested molecules. Their IC50 were in the range
between 268 nM (Compound 7) and >5000 nM (Compound 10). Replacing the phenyl group (HET2) in
compound 7 by a pyrimidin-2-yl group in compound 10 resulted in total loss of potency. On the other
TE
hand, a slightly increasing trend for PDE10A inhibition (IC50 = 268 nM) was observed for compound 7,
which incorporated another HET1 moiety (5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazine instead of 5,7-
dimethyl-[1,2,4]triazolo[1,5-a]pyrimidine in 9).
EP
As for the second tested scaffold, pyrazolo[1,5-a]pyridine (II, Table 2) the obtained IC50 values were
also in the range of 500-800 nM (Compounds 17 and 18).
Assuming the binding mode depicted on Fig 3. the basicity of N(1) nitrogen in both scaffolds is weak
C
(pKa 1,6-2,3) thus the potency of the compounds might be expected to be low (in micromolar range).
Table 1
AC
PT
RI
U SC
AN
Compound# HET1 HET2 IC50 (nM)
M
Table 2
For the more basic scaffold, 1H-1,3-benzodiazole (IV), the IC50 values for the first synthesized
compounds, 22 and 26, were 47nM and 27nM, respectively - the strong increasing trend for PDE10A
inhibition was observed – the obtained values were 10-fold greater than for previous compounds
incorporating scaffolds I and II (Table 3). The potency for Compound 26 (possessing HET1-2 = 5,8-
dimethyl-[1,2,4]triazolo[1,5-a]pyrazine) was increased 2-fold than for Compound 22. Since we
observed this trend in the case of previous scaffolds (I-II), we decided to develop a library of
compounds which possessed only 5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazine (HET1-2) as HET1
ACCEPTED MANUSCRIPT
moiety. Simultaneously, we decided to check the influence of different HET2 moieties on inhibitory
potency toward PDE10A. The best results (Table 3) were obtained when HET2 was an unsubstituted
phenyl. Replacing the phenyl group by another aryl such as thiazole, imidazole, oxazole, pyridine,
pyrimidine or pyrazine resulted in slightly lesser potency (compounds 30, 31, 33, 42, 48). Only in
case when HET2 = thiophene or furan (compounds 40 and 41) potency was retained (IC50 = 67 nM
and 28 nM, respectively). In the case of pyrazine we observed a significant loss in potency (>1000
nM, 48). We noted that substitution of the HET2 moiety (when HET2 = phenyl or pyridine) at the C-2
position led to increase in potency toward PDE10A. Especially methoxy group or fluorine proved to be
the most favorable (compounds 27 and 32, IC50 = 37 nM and 19,5 nM, respectively). The same trend
can be observed for pyridine substituent. Compound 46, having pyridin-3-yl group was nearly 3-fold
PT
less potent (IC50 = 166 nM) than 30 which possessed pyridin-2-yl group (IC50 = 63 nM). Bulkier
groups at C-2 position of the phenyl ring, such as trifluoromethoxy or trifluoromethyl (compounds 36
and 37) contributed to a lesser inhibitory activity (IC50 = 280 nM and >1000 nM, respectively). In the
case where HET2 was substituted by fluorine or methoxyl at pyridine C-3 position (49 and 50) the
RI
potency was retained (IC50 = 69 and 40 nM, respectively), but methoxy group at position C-4
contributed to lesser potency (IC50 = 280 nM for Compound 51).
SC
Both addition of a –CH2- linker between the center scaffold and HET2 moiety (compound 34) as well
as replacing the HET2 group by a bulkier substituent (bicyclic, such as quinoxalin-2-yl, 35) resulted in
significant decreasing of potency (IC50 > 1000 nM). Also replacing HET1 with 4-methylquinazoline
(HET1-3) while maintaining phenyl group as HET2 resulted in decreasing of inhibition activity toward
U
PDE10A (58, IC50 = 315 nM).
We also have observed that after the methylation of nitrogen N(3) in the center scaffold (thus blocking
AN
the possibility of formation of tautomeric forms within the 1H-1,3-benzodiazole core) the activity
toward PDE10A significantly decreased (to 794 nM for compound 25a whereas for compound 26 IC50
was 27 nM). When the critical nitrogen N(1) was methylated (compound 25b) the inhibitory activity
was completely suppressed. This observation seems to confirm the critical role of nitrogen N(1) in this
M
Table 3
D
1
C
PT
48 H HET1-2 Pyrazin-2-yl >1000
49 H HET1-2 3-Fluoropyridin-2-yl 69
50 H HET1-2 3-Methoxypyridin-2-yl 40
51 H HET1-2 4-Methoxypyridin-2-yl >280
RI
52 H HET1-2 4-Methyl-1,3-thiazol-2-yl 117
53 H HET1-2 5-Methyl-1,3-thiazol-2-yl 198
58 H HET1-3 Phenyl 315
SC
For the next scaffold, imidazo[1,2-a]pyrimidine (IV) the inhibition activity (Table 4) was within the
same range as for 1H-1,3-benzodiazole analogues (Table 3). The obtained IC50 values for the most
active compounds (66 and 67; 35 nM and 52 nM, respectively) were consistent with those observed
U
for Compounds 22 and 32. The compound with HET2 = pyridine-2-yl (69) was twice less potent (IC50 =
115 nM) than its 1H-1,3-benzodiazole counterpart (30, IC50 = 63 nM). In this series of compounds we
AN
also have observed that the substitution especially at C-2 position in the phenyl ring of HET2 moiety is
critical for retaining high potency.
Table 4
M
66 HET1-2 Phenyl 35
67 HET1-2 2-Methoxyphenyl 52
68 HET1-2 1,3-Thiazol-2-yl 135
AC
During ADMET studies on drug discovery microsomal stability tests are primary assays for compound
selection for further development. Microsomal stability assays are “gold standard” for investigation of
First Phase metabolism, measurement in vitro intrinsic clearance or identifying formed metabolites
with good correlation to hepatic stability approach [41]. On the base of microsomal stability it is
possible to rank order compounds undergoing enzymatic reactions. Microsomal stability assessment
is rapid, reproducible in high throughput analyses and cost reducing approach in comparison to
hepatic stability [42]. Moreover, the liver microsomal in vitro T1/2 approach can be a suitable way to
measure in vitro CLint, which can be scaled up to the in vivo situation and used in the prediction of
human clearance [43].
PT
The set of compounds, possessing the 1H-1,3-benzodiazole (III) and imidazo[1,2-a]pyrimidine (IV)
scaffold were selected for metabolic stability study. The metabolic stability was assessed (Table 5) by
RI
measuring the intrinsic clearance in human and rat liver microsomes (HLM Cl and RLM Cl). The HET1
fragment had critical importance as for the stability of the given compound. The 4-methylquinazoline
moiety (HET1-3) proved to be very unstable (Cl > 450 µl x min x mg , Compound 58), whereas
-1 -1
SC
optimal clearance value ranging from 0,7 to 34,4 µl x min x mg (Table 5).
-1 -1
Table 5
U
Metabolic stability of selected compounds
-1 -1
AN
Compound# Microsome type Cl int (µl x min x mg )
26 RLM 27.4
26 HLM 34.4
30 RLM 11.1
M
40 RLM 26.3
49 RLM 1.8
50 RLM 5.4
D
50 HLM 0.7
58 RLM >450
66 RLM 5.6
TE
67 RLM 9.1
70 RLM 3.1
71 RLM 11.5
72 RLM 15.0
EP
74 RLM 18.9
75 RLM 1.8
st st
RLM – rat liver microsomes, 1 phase, HLM – human liver microsomes, 1 phase
The model compound, BMS’s Example 1a ([18],Fig. 1) is significantly less metabolically stable, when
C
Table 6.
Table 6
The most active compounds from the 1H-1,3-benzodiazole (III) and imidazo[1,2-a]pyrimidine (IV)
series (with IC50 values < 200 nM) were also screened for PDE selectivity. The selectivity screen was
performed using an enzymatic activity luminescent assay PDE-Glo. The compounds were screened
against PDE1C and PDE9A. The preliminary selectivity assessment revealed no activity against
them. For all twenty-five tested compounds (22, 26, 27, 29, 30, 31, 32, 40, 41, 44, 45, 46, 47, 49, 50,
52, 53, 63, 66, 67, 68, 69, 70 ,74, 75) IC50 values for PDE1C and PDE9A inhibitory activity were
greater than 10 µM. Additionally, Compounds 26 and 66 as representatives of both leading series
PT
were screened against representative members of all other PDE families at 100 nM (Table 7). Both
compounds proved to be very selective toward PDE10A.
Table 7
RI
Selectivity screen against representative members of all other PDE families at 100 nM. Results are
expressed as % inhibion of PDE enzyme
SC
% inhibition
Enzyme Compound 26 Compound 66
U
PDE1C 16% 5%
PDE2A 8% 9%
AN
PDE3B -3% 7%
PDE4B1 3% 4%
PDE5A1 6% 6%
PDE6C -3% 18%
M
PDE7A 8% 26%
PDE8A1 -4% -1%
PDE9A2 -7% -3%
D
3. Conclusions
We have identified two new classes of compounds who proved to be potent and stable PDE10A
EP
or 6- membered ring by bulkier substituent (10-membered, such as quinoxalinyl group) as HET2 group
resulted in decreased potency probably due to spatial limitations in the active binding pocket. We also
AC
noticed that nitrogen N(1) in central bicyclic core plays important role for PDE10A interaction – in the
1H-1,3-benzodiazole series the inhibitory activity may be suppressed in case when the N(1) is
methylated.
Both obtained series of inhibitors possess similar metabolic stability (Clint in the range 0,7-34,4 µl x
-1 -1
min x mg ) and high selectivity toward PDE10A. The compound 66 from the imidazo[1,2-
a]pyrimidine series proved to be equally potent and 10-fold more stable than model compound
(Example 1a) developed by BMS. Further work on these interesting classes of PDE10A inhibitors will
be disclosed in due course.
4. Experimental section
4.1. Chemistry: general procedures
Chemicals (with purity at least 95%) were purchased from ABCR, Acros, Alfa Aesar, Combi-Blocks,
Fluorochem, Fluka, Merck and Sigma Aldrich and used without further purification. Solvents were
ACCEPTED MANUSCRIPT
purified according to standard procedures, if required. Air or moisture sensitive reactions were carried
out under argon atmosphere. All compounds were routinely checked by thin-layer chromatography
(TLC). TLC was performed on silica gel coated plates (Kieselgel F254) and visualized using UV. Flash
1
chromatography was performed using Merck silica gel 60 (230-400 mesh ASTM). H NMR spectra
were performed on a Varian Inova 300 NMR spectrometer or Bruker DRX 500 NMR spectrometer
1 13
with H being observed at 300 MHz or 500 MHz, respectively. C NMR spectra were taken on a
13
Varian Inova 300 NMR spectrometer with C being observed at 75 MHz. Due to the poor solubility of
13
some obtained final compounds a standard characterization by C NMR was omitted. Chemical shifts
1 13
for H and C NMR spectra were reported in δ (ppm) using tetramethylsilane as internal standard.
The abbreviations for multiplicity of signals were as follows: s (singlet), d (doublet), t (triplet), m
PT
(multiplet), dd (doublet of doublets), dt (doublet of triplet), q (quartet). Coupling constants (J) were
expressed in Hertz. Mass spectra (Atmospheric Pressure Ionization Electrospray, API-ES) were
obtained on Agilent 6130 LC/MSD spectrometer.
RI
4.1.1. 1-Amino-4-(methoxycarbonyl)pyridin-1-ium 2,4,6-trimethylbenzene-1-sulfonate (3)
Amino-2,4,6-trimethylbenzene-1-sulfonate [20] (5,46 g, 25,4 mmol, 1 eq.) was dissolved in dry DCM
o
(30 mL) and cooled under argon atmosphere to 0 C, then methyl isonicotinate (3,83 g, 27,9 mmol, 1,1
SC
eq.) was added dropwise within 1 min. The whole was slowly (without removal of the cooling bath)
warmed to RT (about 3 h) and further stirring at RT under inert gas was continued overnight (18h).
The solvent was evaporated, Et2O (100 mL) was added to the solid residue and the whole was
o
refluxed for 30 min, then cooled to 0 C, filtered, washed with Et2O and dried under vacuum. 6,43 g of
U
-
3 were obtained as a solid (yield 72%). API-ES: Calculated for C7H9N2O2 (pyridinium cation) [M+H]
-
m/z 154.07, found 154.1; calculated for C9H11O3S (2,4,6-trimethylbenzenesulfonate anion) [M-H] m/z
198.03, found 198.1.
AN
4.1.2. {2-Phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl}methanol (5)
A solution of methyl 2-phenyl-[1,2,4]triazolo[1,5-a]pyridine-7-carboxylate 4 [21] (2,71 g, 10,7 mmol, 1
o
M
eq.) in dry THF (70 mL) was cooled under argon atmosphere to -40 C, then LiAlH4 (0,83 g, 2 eq.) was
o
added in small portions during 10 min. After addition of LiAlH4 the whole was stirred at -40 C for 30
o
min, then the reaction mixture was slowly warmed initially to 0 C (within 1 h) and stirred at this
o
temperature for 30 min. Next, the whole was warmed to 10 C and stirred for further 2h. Water (15 mL)
D
was cautiously added to destroy the excess of LiAlH4, then AcOEt (50 ml) was added and the whole
was filtered through celite. Water phase was extracted with AcOEt (3 x 50 mL), combined extracts
were dried with Na2SO4 and concentrated. The obtained crude product (2,07 g) was purified by flash
TE
chromatography (eluent CHCl3/MeOH 0-2%). 1,01 g of pure 5 were obtained as a solid (yield 42%).
1
H NMR (300 MHz, DMSO-d6): δ 8.91 (d, J = 7.0 Hz, 1H), 8.20 (dd, J = 7.4, 1.9 Hz, 2H), 7.71 (s, 1H),
7.60 – 7.35 (m, 3H), 7.12 (dd, J = 7.0, 1.3 Hz, 1H), 5.62 (t, J = 5.8 Hz, 1H), 4.65 (d, J = 5.7 Hz, 2H).
EP
and the whole was stirred for 15 min. TEA (3,23 g, 32 mmol, 7,2 eq.) was added and the reaction
mixture was slowly (1h) warmed to RT, then stirred at RT for further 1h. Water (80 mL) and DCM (50
AC
mL) were added and water phase was extracted with DCM (2 x 30 mL). Combined organic extracts
were washed successively with water (1 x 50 mL), 1% aq. H2SO4 (1 x 50 mL), water (1 x 50 mL),
saturated aq. Na2CO3 (1 x 50 mL), water ( 1 x 50 mL), brine (1 x 50 mL), dried with Na2SO4 and
evaporated. The obtained crude product (1,02 g) was purified by flash chromatography (eluent
1
CHCl3/MeOH 0-1%). 0,86 g of 6 were obtained as a solid (yield 87%). H NMR (300 MHz, DMSO-d6):
δ 10.15 (s, 1H), 9.25 – 8.97 (m, 1H), 8.56 (s, 1H), 8.39 – 8.03 (m, 2H), 7.76 – 7.17 (m, 4H).
4.1.4. 7-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-phenyl-[1,2,4]triazolo[1,5-a]pyridine (7)
To a solution of 6 (0,31 g, 1,41 mmol 1,3 eq.) in DMF (40 mL) 1-amino-2-imino-3,6-dimethyl-2,3-
dihydro-1-pyrazinium diphenylphosphinate [23] (0,38 g, 1,09 mmol, 1 eq.) were added and the whole
o
was stirred under inert gas at 80 C for 4h. 0,27 g (1,41 mmol, 1,3 eq.) of Na2S2O5 were added and
o
the reaction mixture was heated under air atmosphere at 100 C overnight (18h). The solvent was
evaporated and the residue was purified by flash chromatography (eluent heptane/AcOEt 0-100%).
1
86 mg of 7 were obtained as a solid (yield 23%). H NMR (300 MHz, CDCl3): δ 8.68 (ddd, J = 8.0, 4.4,
ACCEPTED MANUSCRIPT
0.9 Hz, 2H), 8.36 – 8.22 (m, 2H), 7.98 (dd, J = 7.1, 1.7 Hz, 1H), 7.89 (d, J = 0.9 Hz, 1H), 7.57 – 7.37
13
(m, 3H), 2.96 (s, 3H), 2.78 (s, 3H). C NMR (75 MHz, CDCl3): δ 165.0, 161.2, 151.7, 149.9, 146.8,
132.0, 130.5, 130.2, 130.1, 129.9, 128.6, 128.1, 127.2, 114.6, 112.5, 20.5, 14.3.
4.1.5. 7-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-2-phenyl-[1,2,4]triazolo[1,5-a]pyridine (9)
The mixture of 8a [22] (0,16 g, 0,67 mmol,1 eq.) and 1-amino-4,6-dimethyl-1H-pyrimidin-2-ylidene-
ammonium diphenylphosphinate [23] (0,28 g, 0,80 mmol, 1,2 eq.) in POCl3 (7 mL) was heated to
reflux under argon atmosphere for 3h. The reaction mixture was poured on crushed ice with excess of
solid Na2CO3, and CHCl3 (30 mL) was added. The water phase was extracted with CHCl3 (5 x 20 mL),
the extracts were dried (Na2SO4) and concentrated. The crude product was chromatographed on a
PT
preparative plate (PLC Kieselgel 60 F254, 2 mm) eluting with CHCl3/MeOH/TEA (97:2:1). 29 mg of 9
1
were obtained (yield 10%). H NMR (300 MHz, DMSO-d6): δ 9.09 (d, J = 7.1 Hz, 1H), 8.44 (s, 1H),
8.27 – 8.19 (m, 2H), 7.88 (d, J = 7.0 Hz, 1H), 7.63 – 7.50 (m, 3H), 7.20 (s, 1H), 2.81 (s, 3H), 2.60 (s,
3H).
RI
4.1.6. 2-(7-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-[1,2,4]triazolo[1,5-a]pyridin-2-
yl)pyrimidine (10)
Synthesized from 8b [22] following the procedure described for 9. Purified on a preparative plate (PLC
SC
1
Kieselgel 60 F254, 2 mm) eluting with CHCl3/MeOH/TEA (97:2:1). Solid, 42 mg (yield 20%). H NMR
(300 MHz, DMSO-d6): δ 9.21 (d, J = 7.1 Hz, 1H), 9.07 (d, J = 4.9 Hz, 2H), 8.58 (s, 1H), 8.01 (dd, J =
7.1, 1.7 Hz, 1H), 7.70 (t, J = 4.9 Hz, 1H), 7.28 (s, 1H), 2.87 (s, 3H), 2.65 (s, 3H).
U
4.1.7. N-(2-Acetylphenyl)-2-phenyl-[1,2,4]triazolo[1,5-a]pyridine-7-carboxamide (11)
To a solution of 8a [22] (0,30 g, 1,25 mmol, 1 eq.) in DMF (30 mL) DIPEA (0,81 g, 6,27 mmol, 5 eq.)
AN
and HATU (1,19 g, 3,14 mmol, 2,5 eq.) were added and the whole was stirred at RT for 10 min. 1-(2-
Aminophenyl)ethanone (0,34 g, 2,51 mmol, 2 eq.) was added and the reaction mixture was heated to
o
60 C for 18h. The solvent was evaporated and the residue was purified by flash chromatography
1
(eluent heptane/AcOEt 0-50%). 0,16 g of 11 were obtained as a solid (yield 36%). H NMR (300 MHz,
M
DMSO-d6): δ 12.40 (s, 1H), 9.18 (d, J = 6.9 Hz, 1H), 8.55 (d, J = 7.5 Hz, 1H), 8.36 (d, J = 0.9 Hz, 1H),
8.25 (dd, J = 7.4, 2.2 Hz, 2H), 8.12 (dd, J = 8.0, 1.4 Hz, 1H), 7.76 – 7.67 (m, 1H), 7.65 – 7.52 (m, 4H),
7.33 (dd, J = 11.0, 4.2 Hz, 1H), 2.71 (s, 3H).
D
o
added and the whole was heated with vigorous stirring to 100 C for 18h. The precipitated crude
product was washed with hot MeOH, filtered and dried under vacuum. 0,11 g of 12 were obtained as
1
a solid (yield 78%). H NMR (300 MHz, CDCl3): δ 8.95 (d, J = 0.7 Hz, 1H), 8.62 (d, J = 6.5 Hz, 1H),
8.25 (ddd, J = 9.5, 7.3, 1.7 Hz, 3H), 8.04 (dd, J = 7.9, 4.4 Hz, 2H), 7.94 – 7.76 (m, 1H), 7.59 (dd, J =
EP
13
11.2, 4.0 Hz, 1H), 7.53 – 7.32 (m, 3H), 2.98 (s, 3H). C NMR (75 MHz, CDCl3): δ 168.8, 164.6, 156.8,
151.7, 149.8, 140.2, 133.9, 130.2, 129.1, 128.6, 127.8, 127.5, 127.1, 124.9, 123.2, 115.4, 113.5, 21.8.
4.1.9. 2-Phenylpyrazolo[1,5-a]pyridine-6-carbaldehyde (16)
C
o
A solution of 15 [24] (0,22 g, 1 mmol, 1 eq.) in dry DCM (20 mL) was cooled to -78 C under argon
atmosphere, then DIBALH (1M solution in hexane, 1,50 ml, 1,5 eq.) was added dropwise. The whole
AC
o
was stirred at -78 C for 2h, then slowly warmed to RT (2h). The reaction was quenched by addition of
saturated aqueous solution of NH4Cl (40 mL). Water phase was extracted with DCM (5 x 30 mL),
extracts were dried with Na2SO4, and concentrated. The crude product was purified by flash
1
chromatography (eluent heptane/AcOEt 0-30%). 73 mg of 16 were obtained as a solid (yield 33%). H
NMR (300 MHz, CDCl3): δ 9.91 (s, 1H), 8.92 (d, J = 1.0 Hz, 1H), 8.04 – 7.93 (m, 2H), 7.60 – 7.54 (m,
2H), 7.54 – 7.38 (m, 3H), 6.91 (d, J = 0.7 Hz, 1H).
4.1.10. 6-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-2-phenylpyrazolo[1,5-a]pyridine (17)
Synthesized from 16 (94 mg, 0,41 mmol, 1 eq.) and 1-amino-4,6-dimethyl-1H-pyrimidin-2-ylidene-
ammonium diphenylphosphinate [23] (145 mg, 0,41 mmol, 1 eq.) following the procedure described
for 7. Purified on a preparative plate (PLC Kieselgel 60 F254, 2 mm) eluting with CHCl3/MeOH/TEA
1
(97:2:1). Solid, 10 mg (yield 7%). H NMR (300 MHz, CDCl3): δ 9.44 (s, 1H), 8.10 – 7.90 (m, 3H), 7.63
(d, J = 9.2 Hz, 1H), 7.43 (ddd, J = 20.0, 13.8, 6.2 Hz, 3H), 6.86 (d, J = 7.8 Hz, 2H), 2.84 (s, 3H), 2.67
(s, 3H).
ACCEPTED MANUSCRIPT
4.1.11. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-phenylpyrazolo[1,5-a]pyridine (18)
Synthesized from 16 (0,17 g, 0,77 mmol, 1 eq.) and 1-amino-2-imino-3,6-dimethyl-2,3-dihydro-1-
pyrazinium diphenylphosphinate [23] (0,30 g, 0,84 mmol, 1.1 eq.) following the procedure described
1
for 7. Purified by flash chromatography (eluent heptane/AcOEt 0-30%). Solid, 69 mg (yield 26%). H
NMR (300 MHz, CDCl3): δ 9.50 (s, 1H), 8.08 – 7.91 (m, 3H), 7.85 (s, 1H), 7.60 (d, J = 9.0 Hz, 1H),
7.43 (dt, J = 25.1, 7.2 Hz, 3H), 6.84 (s, 1H), 2.93 (s, 3H), 2.76 (s, 3H).
4.1.12. General procedure I – synthesis of 1H-1,3-benzodiazole esters with PPA (intermediates 20a-
c)
The mixture of ethyl 3,4-diaminobenzoate 19 (1 eq., 27.7 mmol) and appropriate benzoic acid (1
PT
o
eq.,27.7 mmol) and 20 mL of polyphosphoric acid was heated at 140 C for 3 hours. Warm reaction
mixture was poured onto ice covered with excess of solid NaHCO3 and then 60 mL of AcOEt were
added. Aqueous phase was extracted with AcOEt (4 x 70 mL). Extracts were dried over Na2SO4 and
RI
concentrated. The crude product was purified by chromatography on silica gel (eluent heptane/AcOEt,
0-60% or CHCl3/MeOH 0-5%).
SC
Synthesized from 19 (5 g, 27,2 mmol, 1 eq.) and benzoic acid (3,32 g, 27,2 mmol, 1 eq.). Solid, 4,5 g
1
(yield 62%). H NMR (500 MHz, CDCl3): δ 8.37 (s, 1H), 8.12 (dd, J = 7.2, 2.0 Hz, 2H), 7.98 (dd, J =
8.5, 1.3 Hz, 1H), 7.63 (d, J = 8.4 Hz, 1H), 7.52 – 7.37 (m, 3H), 4.40 (q, J = 7.1 Hz, 2H), 1.40 (t, J = 7.1
U
+ +
Hz, 3H). API-ES: m/z 267.1 [M+H] , 555.1 [2M+Na] .
Synthesized from 19 (3 g, 16,3 mmol, 1 eq.) and isonicotinic acid (2,43 g, 19,6 mmol, 1,1 eq.). Solid,
+ -
2,22 g (yield 50%). API-ES: m/z 290.1 [M+Na] , 266.1 [M-H] .
D
The mixture of ethyl 3,4-diaminobenzoate 19 (1 eq., 13.6 mmol), appropriate carboxyaldehyde (2,2
eq., 29.9 mmol) and Na2S2O5 (2,2 eq., 29.9 mmol) in DMF (50 mL) was stirred at RT under argon
atmosphere for 20h, then the solvent was evaporated. Water (100 mL) and AcOEt (50 mL) were
EP
added and the phases were separated. Water phase was extracted with AcOEt (5 x 30 mL). Organic
extracts were dried (Na2SO4), concentrated and chromatographed on silica gel (eluent
heptane/AcOEt, 0-50% or CHCl3/MeOH, 0-5%).
C
Synthesized from 19 (1,06 g, 5,76 mmol, 1 eq.) and 2-fluorobenzaldehyde (1,61 g, 12,7 mmol, 2,2
AC
1
eq.). Solid, 0,62 g (yield 38%). H NMR (300 MHz, DMSO-d6): δ 12.91 (s, 1H), 8.27 (t, J = 6.8 Hz,
2H), 7.88 (d, J = 8.4 Hz, 1H), 7.73 (d, J = 7.5 Hz, 1H), 7.62 (dd, J = 14.5, 6.3 Hz, 1H), 7.55 – 7.33 (m,
2H), 4.34 (q, J = 7.1 Hz, 2H), 1.36 (t, J = 7.1 Hz, 3H).
Synthesized from 19 (1,09 g, 5,93 mmol, 1 eq.) and 3-fluorobenzaldehyde (1,62 g, 12,7 mmol, 2,2
1
eq.). Solid, 0,58 g (yield 35%). H NMR (300 MHz, DMSO-d6): δ 8.23 (s, 1H), 8.06 (d, J = 8.0 Hz, 1H),
7.99 (dd, J = 9.7, 1.9 Hz, 1H), 7.88 (dd, J = 8.5, 1.5 Hz, 1H), 7.73 (s, 1H), 7.71 – 7.60 (m, 1H), 7.41
-
(td, J = 8.5, 2.3 Hz, 1H), 4.35 (q, J = 7.1 Hz, 2H), 1.48 – 1.27 (m, 3H). API-ES: m/z 283.1 [M-H] .
Synthesized from 19 (1,0 g, 5,44 mmol, 1 eq.) and o-anisaldehyde (1,63 g, 12 mmol, 2,2 eq.). Solid,
1
0,41 g (yield 25%). H NMR (300 MHz, CDCl3): δ 8.59 (dt, J = 15.6, 4.7 Hz, 1H), 8.03 – 7.96 (m, 1H),
7.54 – 7.41 (m, 2H), 7.17 (ddd, J = 7.8, 7.4, 1.0 Hz, 1H), 7.09 (d, J = 8.4 Hz, 1H), 4.45 – 4.33 (m, 2H),
4.16 – 4.06 (m, 3H), 1.36 (t, J = 7.1 Hz, 3H).
PT
4.1.14. General procedure III - synthesis of 1H-1,3-benzodiazole esters with PTSA (intermediates
20h-k)
RI
The mixture of ethyl 3,4-diaminobenzoate 19 (1 eq., 13.6 mmol), appropriate carboxyaldehyde (1,5
eq., 20.4 mmol) and p-toluenesulphonic acid (0,2 eq., 2.72 mmol) in toluene (150 mL) was heated at
reflux with Dean-Stark apparatus for 6h. After completion of the reaction (TLC control) the whole was
SC
concentrated and chromatographed on silica gel (heptane/ethyl acetate, gradient 0-60% or
CHCl3/MeOH 0-5%).
U
Synthesized from 19 (5,0 g, 27,7 mmol, 1 eq.) and 2-thiazolecarboxaldehyde (3,56 g, 30,5 mmol, 1,1
1
eq.). Solid, 7,4 g (yield 88%). H NMR (300 MHz, CDCl3): δ 8.88 (d, J = 0.9 Hz, 1H), 8.01 (d, J = 3.2
AN
Hz, 1H), 7.91 (d, J = 1.8 Hz, 1H), 7.83 (dd, J = 8.4, 1.9 Hz, 1H), 7.50 (dd, J = 3.2, 1.0 Hz, 1H), 6.75 (d,
J = 8.4 Hz, 1H), 4.75 (s, 2H), 4.34 (q, J = 7.1 Hz, 2H), 1.39 (dd, J = 8.7, 5.6 Hz, 3H). API-ES: m/z
-
272.1 [M-H] .
1H), 7.87 (d, J = 8.6 Hz, 1H), 7.81 – 7.65 (m, 1H), 7.49 (s, 1H), 7.23 – 7.17 (m, 1H), 4.34 (q, J = 7.1
-
Hz, 2H), 4.20 (s, 3H), 1.36 (t, J = 7.1 Hz, 3H). API-ES: m/z 269.1 [M-H] .
TE
Synthesized from 19 (3,37 g, 18,7 mmol, 1 eq.) and thiazole-4-carboxaldehyde (2,16 g, 18,7 mmol, 1
1
eq.). Solid, 1,72 g (yield 32%). H NMR (300 MHz, CDCl3): δ 8.96 (d, J = 2.0 Hz, 1H), 8.42 (d, J = 2.0
EP
Hz, 1H), 8.02 (dd, J = 8.5, 1.6 Hz, 1H), 7.67 (s, 1H), 4.43 (q, J = 7.1 Hz, 2H), 1.44 (t, J = 7.1 Hz, 3H).
Synthesized from 19 (3,37 g, 18,7 mmol, 1 eq.) and thiazole-5-carboxaldehyde (2,2 g, 18,7 mmol, 1
C
1
eq.). Solid, 4,0 g (yield 70%). H NMR (300 MHz, CDCl3): δ 8.95 (s, 1H), 8.50 (s, 1H), 8.46 – 8.15 (m,
1H), 7.99 (d, J = 8.5 Hz, 1H), 7.63 (d, J = 74.1 Hz, 1H), 4.42 (q, J = 7.1 Hz, 2H), 1.44 (t, J = 7.1 Hz,
AC
3H).
4.1.15. General procedure IV – synthesis of 1H-1,3-benzodiazole esters with POCl3 (compounds, 20l-
20iv)
The mixture of ethyl 3,4-diaminobenzoate 19 (1 eq., 7.34 mmol) and appropriate benzoic acid (1 eq.,
7.34 mmol) was put under argon atmosphere and 15 mL of POCl3 were added. The whole was
heated at reflux for 3 hours. The mixture was cooled to room temperature, poured on ice and
neutralized with 6M NaOH (80 mL), then brought to pH ca. 9 by addition of 20 g of solid NaHCO3. 100
mL of CHCl3 were added and phases were separated. Aqueous phase was extracted with CHCl3 (2 x
50 mL). Combined organic phases were purified by chromatography on silica gel (CHCl3/MeOH,
gradient 0-5%).
Synthesized from 19 (2,54 g, 14,1 mmol, 1 eq.) and 2-quinoxalinecarboxylic acid (2,5 g, 14,1 mmol, 1
-
eq.). Solid, 3,01 g (yield 67%). API-ES: m/z 317.1 [M-H] .
PT
Synthesized from 19 (1,75 g, 9,7 mmol, 1 eq.) and 2-(trifluoromethoxy)benzoic acid (2,0 g, 9,7 mmol,
1
1 eq.). Solid, 2,52 g (yield 74%). H NMR (300 MHz, CDCl3): δ 8.70 (s, 1H), 8.18 (d, J = 1.3 Hz, 1H),
8.05 – 7.96 (m, 1H), 7.93 (dd, J = 7.7, 1.7 Hz, 1H), 7.62 – 7.51 (m, 2H), 7.49 – 7.40 (m, 1H), 7.32 (dt,
RI
+
J = 8.3, 7.6 Hz, 1H), 4.39 (q, J = 7.1 Hz, 2H), 1.34 (t, J = 7.1 Hz, 3H). API-ES: m/z 351.1 [M+H] ,
+ + -
373.1 [M+Na] , 723.1 [2M+Na] , 349.1 [M-H] .
SC
Synthesized from 19 (2,79 g, 15,5 mmol, 1 eq.) and 2-trifluoromethylbenzoic acid (3,0 g, 15,5 mmol, 1
-
eq.). Solid, 1,45 g (yield 28%). API-ES: m/z 333.2 [M-H] .
U
4.1.15.5. Ethyl 2-(2-cyanophenyl)-1H-1,3-benzodiazole-6-carboxylate (20p)
Synthesized from 19 (6,12 g, 34 mmol, 1 eq.) and o-cyanobenzoic acid (5 g, 34 mmol, 1 eq.). Solid,
AN
1
0,4 g (yield 4%). H NMR (300 MHz, DMSO-d6): δ 13.46 (s, 1H), 8.28 (s, 1H), 8.10 (dd, J = 13.4, 7.6
Hz, 2H), 7.93 (t, J = 7.7 Hz, 2H), 7.75 (t, J = 7.2 Hz, 2H), 4.35 (q, J = 7.1 Hz, 2H), 1.37 (t, J = 7.1 Hz,
3H).
M
Synthesized from 19 (6,62 g, 36,7 mmol, 1 eq.) and 2-methylbenzoic acid (5 g, 36,7 mmol, 1
1
eq.).Solid, 9,7 g (yield 80%). H NMR (300 MHz, CDCl3): δ 8.36 (dd, J = 1.6, 0.7 Hz, 1H), 8.02 (dd, J
D
= 8.5, 1.6 Hz, 1H), 7.70 (dd, J = 8.5, 0.7 Hz, 1H), 7.68 – 7.63 (m, 1H), 7.44 – 7.29 (m, 3H), 4.41 (qd, J
+ +
= 7.2, 2.8 Hz, 2H), 2.58 (s, 3H), 1.40 (t, J = 7.1 Hz, 3H). API-ES: m/z 281.1 [M+H] , 303.1 [M+Na] ,
+ - -
TE
Synthesized from 19 (4,28 g, 23,3 mmol, 1 eq.) and 2-furancarboxylic acid (3,02 g, 25,6 mmol, 1,1
EP
+ + +
eq.). Solid, 1,52 g (yield 25%). API-ES: m/z 257.1 [M+H] , 297.1 [M+Na] , 535.1 [2M+Na] , 255.1
-
[M-H] .
Synthesized from 19 (2,11 g, 11,7 mmol, 1 eq.) and 2-thiophenecarboxylic acid (1,5 g, 11,7 mmol, 1
1
eq.). Solid, 0,52 g (yield 16%). H NMR (300 MHz, CDCl3): δ 10.26 (s, 1H), 8.26 (s, 1H), 7.92 (d, J =
AC
7.6 Hz, 1H), 7.83 (s, 1H), 7.56 (d, J = 7.8 Hz, 1H), 7.36 (d, J = 4.4 Hz, 1H), 6.98 (s, 1H), 4.37 (q, J =
+ + +
7.0 Hz, 2H), 1.37 (t, J = 7.1 Hz, 3H). API-ES: m/z 273.1 [M+H] , 295.1 [M+Na] , 567.1 [2M+Na] ,
-
271.1 [M-H] .
Synthesized from 19 (2,32 g, 12,8 mmol, 1 eq.) and oxazole-4-carboxylic acid (1,5 g, 13,3 mmol, 1,03
1
eq.). Solid, 0,79 g (yield 24%). H NMR (300 MHz, DMSO-d6): δ 13.31 (s, 1H), 8.94 (d, J = 3.3 Hz,
1H), 8.71 (d, J = 3.5 Hz, 1H), 8.18 (d, J = 30.9 Hz, 1H), 7.86 (t, J = 8.9 Hz, 1H), 7.65 (dd, J = 34.8, 8.5
+
Hz, 1H), 4.34 (q, J = 7.1 Hz, 2H), 1.35 (t, J = 7.1 Hz, 3H). API-ES: m/z 280.1 [M+Na] , 537.1
+ -
[2M+Na] , 256.1 [M-H] .
Synthesized from 19 (4,37 g, 24,2 mmol, 1 eq.) and niacin (3,0 g, 24,2 mmol, 1 eq.). Solid, 1,01 g
1
(yield 15%). H NMR (300 MHz, CDCl3): δ 9.35 (d, J = 1.7 Hz, 1H), 8.62 (dt, J = 13.0, 6.5 Hz, 1H),
8.54 – 8.41 (m, 1H), 8.27 (s, 1H), 7.91 (dd, J = 8.5, 1.5 Hz, 1H), 7.56 (d, J = 8.2 Hz, 1H), 7.39 (dd, J =
+
8.0, 4.9 Hz, 1H), 4.37 (q, J = 7.1 Hz, 2H), 1.34 (t, J = 7.1 Hz, 3H). API-ES: m/z 268.1 [M+H] .
PT
Synthesized from 19 (3,26 g, 18,1 mmol, 1 eq.) and 5-chloro-2-thiophenecarboxylic acid (3,0 g, 18,1
+ -
mmol, 1 eq.). Solid, 0,86 g (yield 13%). API-ES: m/z 307.1 [M+H] , 305.1 [M-H] .
RI
Synthesized from 19 (3,56 g, 19,7 mmol, 1 eq.) and 2-pyrazinecarboxylic acid (2,5 g, 19,7 mmol, 1
+ -
eq.). Solid, 1,75 g (yield 32%). API-ES: m/z 269.1 [M+H] , 267.1 [M-H] .
SC
4.1.15.14. Ethyl 2-(3-fluoropyridin-2-yl)-1H-1,3-benzodiazole-6-carboxylate (20y)
Synthesized from 19 (3,75 g, 20,8 mmol, 1 eq.) and 3-fluoropicolinic acid (3,0 g, 20,8 mmol, 1 eq.).
- +
Solid, 1,30 g (yield 18%). API-ES: m/z 284.1 [M-H] , 593.1 [2M+Na] .
U
4.1.15.15. Ethyl 2-(3-methoxypyridin-2-yl)-1H-1,3-benzodiazole-6-carboxylate (20z)
AN
Synthesized from 19 (1,21 g, 6,58 mmol, 1,05 eq.) and 3-methoxy-2-pyridinecarboxylic acid (1,0 g,
+ +
6,27 mmol, 1 eq.). Solid, 1,30 g (yield 18%). API-ES: m/z 298.1 [M+H] , 320.1 [M+Na] , 617.1
+ -
[2M+Na] , 296.1 [M-H] .
M
Synthesized from 19 (3,46 g, 19,2 mmol, 1 eq.) and 4-methoxypicolinic acid (3,0 g, 19,2 mmol, 1 eq.).
1
Solid, 1,82 g (yield 31%). H NMR (300 MHz, CDCl3): δ 10.18 (s, 1H), 8.43 – 8.39 (m, 1H), 8.32 –
D
8.28 (m, 1H), 8.05 – 7.98 (m, 1H), 7.87 (d, J = 2.4 Hz, 1H), 7.82 (t, J = 3.3 Hz, 1H), 6.99 (dd, J = 5.7,
2.6 Hz, 1H), 4.33 (q, J = 7.1 Hz, 2H), 3.95 (s, 3H), 1.36 (t, J = 7.1 Hz, 3H). API-ES: m/z 320.1
TE
+ -
[M+Na] , 332.0 [M+Cl] .
Synthesized from 19 (3,63 g, 20,1 mmol, 1 eq.) and 4-methyl-1,3-thiazole-2-carboxylic acid (3,0 g,
EP
1
20,1 mmol, 1 eq.). Solid, 3,63 g (yield 62%). H NMR (300 MHz, CDCl3): δ 10.14 (s, 1H), 8.74 – 8.67
(m, 1H), 8.31 (d, J = 1.8 Hz, 1H), 8.09 – 8.02 (m, 1H), 7.28 – 7.26 (m, 1H), 7.20 (t, J = 0.8 Hz, 1H),
-
4.34 (q, J = 7.1 Hz, 2H), 2.64 (s, 3H), 1.37 (t, J = 7.1 Hz, 3H). API-ES: m/z 286.0 [M-Hl] .
C
Synthesized from 19 (1,26 g, 6,98 mmol, 1 eq.) and 5-methyl-1,3-thiazole-2-carboxylic acid (1,0 g,
+ -
6,98 mmol, 1 eq.). Solid, 1,33 g (yield 66%). API-ES: m/z 310.1 [M+Na] , 286.1 [M-H] .
To the solution of 1H-1,3-benzodiazole ester 20a-20iv (1 eq., 5.63 mmol) in MeOH (20 mL) 1.35 g
(33,75 mmol, 6 eq.) of NaOH dissolved in 15 mL of water were added. The whole was heated to 60
o
C for 6 hours. The reaction mixture was concentrated to about 30 percent of initial volume, cooled to
o
0 C and 6M hydrochloric acid was added adjusting the pH to 3. Precipitated abundant solid was
filtered, washed with Et2O and dried under vacuum. The products were used in the next step without
further purification.
PT
4.1.16.5. 2-(3-Fluorophenyl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21e)
-
Synthesized from 20e (0,58 g, 2,04 mmol). Solid, 0,59 g (yield 91%). API-ES: m/z 255.1 [M-H] .
RI
-
Synthesized from 20f (0,45 g, 1,58 mmol). Solid, 0,40 g (yield 88%). API-ES: m/z 255.1 [M-H] .
SC
-
Synthesized from 20g (0,40 g, 1,36 mmol). Solid, 0,33 g (yield 80%). API-ES: m/z 267.1 [M-H] .
U
-
Synthesized from 20h (0,82 g, 3,0 mmol). Solid, 0,39 g (yield 46%). API-ES: m/z 244.1 [M-H] .
AN
4.1.16.9. 2-(1-Methyl-1H-imidazol-2-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21i)
-
Synthesized from 20i (1,65 g, 6,1 mmol). Solid, 1,42 g (yield 84%). API-ES: m/z 241.1 [M-H] .
-
Synthesized from 20j (1,72 g, 5,03 mmol). Solid, 1,54 g (yield 87 %). API-ES: m/z 244.1 [M-H] .
-
Synthesized from 20k (4,0 g, 11,7 mmol). Solid, 3,27 g (yield 79 %). API-ES: m/z 244.1 [M-H] .
TE
-
Synthesized from 20m (5,0 g, 15,7 mmol). Solid, 1,50 g (yield 29 %). API-ES: m/z 289.1 [M-H] .
-
Synthesized from 20n (2,52 g, 5,76 mmol). Solid, 1,23 g (yield 48 %). API-ES: m/z 321.1 [M-H] .
AC
Synthesized from 20u (2,16 g, 6,26 mmol). Solid, 1,98 g (yield 90 %). API-ES: m/z 315.1, 317.1 [M-
-
H] .
PT
4.1.16.22. 2-(Pyridin-3-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21v)
-
Synthesized from 20v (1,01 g, 3,76 mmol). Solid, 0,90 g (yield 87 %). API-ES: m/z 238.1 [M-H] .
RI
4.1.16.23. 2-(5-Chlorothiophen-2-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21w)
-
Synthesized from 20w (0,86 g, 2,25 mmol). Solid, 0,81 g (yield 92 %). API-ES: m/z 277.1 [M-H] .
SC
4.1.16.24. 2-(Pyrazin-2-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21x)
-
Synthesized from 20x (5,0 g, 18,6 mmol). Solid, 0,90 g (yield 17 %). API-ES: m/z 239.1 [M-H] .
U
4.1.16.25. 2-(3-Fluoropyridin-2-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21y)
-
Synthesized from 20y (1,30 g, 3,65 mmol). Solid, 1,20 g (yield 90 %). API-ES: m/z 256.1 [M-H] .
AN
4.1.16.26. 2-(3-Methoxypyridin-2-yl)-1H-1,3-benzodiazole-6-carboxylic acid hydrochloride (21z)
-
Synthesized from 20z (0,65 g, 2,19 mmol). Solid, 0,31 g (yield 47 %). API-ES: m/z 268.1 [M-H] .
M
room temperature for 48 hours. The solvent was evaporated and to the obtained residue 15 mL of ice-
cold AcOH were added and the mixture was heated at 100 °C for 24 hours. The mixture was
concentrated to about ¼ volume, then saturated aqueous NaHCO3 solution (50 mL) and 50 mL of
CHCl3 were added. Aqueous phase was separated and extracted with CHCl3 (6 x 40 mL). Combined
organic phases were dried over Na2SO4 and concentrated. The crude product was purified by
chromatography on silica gel (CHCl3/MeOH, gradient 0-10%). 0.13 g of compound 22 were obtained
1
as a solid (yield 30%). H NMR (500 MHz, DMSO-d6): δ 13.10 (s, 1H), 8.42 (s, 1H), 8.22 (d, J = 7.2
Hz, 2H), 8.13 (d, J = 8.2 Hz, 1H), 7.75 (s, 1H), 7.59 (t, J = 7.4 Hz, 2H), 7.57 – 7.50 (m, 1H), 7.12 (d, J
13
= 0.6 Hz, 1H), 2.80 (s, 3H), 2.59 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 146.6, 130.1, 129.8, 128.9,
+
126.5, 110.5, 24.4, 16.5. API-ES: m/z 341.1 [M+H] .
PT
DMSO-d6): δ 164.6, 156.0, 152.7, 149.9, 148.6, 147.1, 146.0, 138.1, 135.6, 126.0, 125.4, 122.1,
121.8 (d, J = 44.2 Hz), 120.0, 112.8, 111.1, 25.0, 17.1.
RI
Synthesized from 21c following the procedure described for 22. Purified on silica gel
1
(chloroform/methanol 0-7%). 90 mg, solid, yield 21%. H NMR (500 MHz, DMSO-d6): δ 13.67 (s, br,
1H), 8.79 (dd, J = 11.3, 6.1 Hz, 3H), 8.31 (s, 1H), 8.18 (s, 1H), 8.16 – 8.08 (m, 2H), 7.18 (s, 1H), 2.82
SC
(s, 3H), 2.61 (s, 3H).
4.1.20. 5-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-1-methyl-2-phenyl-1H-1,3-benzodiazole
(25a) and
U
6-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-1-methyl-2-phenyl-1H-1,3-benzodiazole (25b)
AN
To a solution of 6-{5,7-Dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-2-phenyl-1H-1,3-benzodiazole
(22, 80 mg, 0.23 mmol, 1 eq.) in dry DMF (3.5 mL) K2CO3 (65 mg, 0.47 mmol, 2 eq.) was added. The
whole was put under argon and after 10 minutes MeI (0.03 mL, 0.47 mmol, 2 eq.) was added. The
reaction was carried out for 24 hours at room temperature. To the mixture water (10 mL) and AcOEt
M
(20 mL) were added. Aqueous phase was separated and extracted with ethyl acetate (4 x 20 mL).
Combined extracts were dried with Na2SO4 and concentrated. The residue was chromatographed on
a preparative plate (PLC Kieselgel 60 F254, 2 mm) eluting with CHCl3/MeOH (95:5). 47 mg of the
compound 25a and 40 mg of the compound 25b were obtained as solids (yields 48 and 56%,
D
respectively).
1
Compound 25a: H NMR (300 MHz, DMSO-d6): δ 8.51 (d, J = 1.0 Hz, 1H), 8.22 (dd, J = 8.4, 1.5 Hz,
TE
1H), 7.90 (dd, J = 7.7, 1.8 Hz, 2H), 7.79 (d, J = 8.4 Hz, 1H), 7.64 – 7.57 (m, 3H), 7.17 (s, 1H), 3.94 (s,
3H), 2.82 (s, 3H), 2.61 (d, J = 6.8 Hz, 3H).
1
Compound 25b: H NMR (300 MHz, DMSO-d6): δ 8.42 (d, J = 1.0 Hz, 1H), 8.18 (dd, J = 8.4, 1.5 Hz,
1H), 7.89 (dt, J = 4.3, 2.3 Hz, 2H), 7.82 (d, J = 8.4 Hz, 1H), 7.65 – 7.57 (m, 3H), 7.18 (d, J = 0.8 Hz,
EP
1H), 3.99 (s, 3H), 2.82 (s, 3H), 2.61 (s, 3H).
4.1.21. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-phenyl-1H-1,3-benzodiazole (26)
To the solution of 2-phenyl-1H-1,3-benzodiazole-5-carboxylic acid 21a (1,7 g, 6.2 mmol, 1 eq.) in dry
C
DMF (90 mL) DIPEA (4.0 g, 31 mmol, 5 eq.) and HATU (2.47 g, 6.5 mmol, 1,05 eq.) were added.
After addition of HATU, the whole was put under argon and stirred at room temperature for 5 minutes.
AC
Synthesized from 21d (0,28 g, 1.09 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0.19g (yield 50%). H NMR (300 MHz, DMSO-d6): δ 12.82 (s,
1H), 8.50 (s, 1H), 8.35 – 8.23 (m, 1H), 8.16 (dd, J = 8.4, 1.5 Hz, 1H), 7.95 (s, 1H), 7.78 (d, J = 8.4 Hz,
ACCEPTED MANUSCRIPT
13
1H), 7.68 – 7.54 (m, 1H), 7.46 (ddd, J = 15.0, 9.4, 4.8 Hz, 2H), 2.78 (s, 3H), 2.72 (s, 3H). C NMR (75
MHz, DMSO-d6): δ 164.1, 161.8, 158.5, 148.6 , 146.9, 132.9 (d, J = 8.7 Hz), 131.0, 130.8, 130.0,
125.8, 125.0, 122.3, 118.4 (d, J = 11.4 Hz), 117.2 (d, J = 21.5 Hz), 20.9, 14.7. API-ES: m/z 357 [M-
- + + +
H] , 359.1 [M+H] , 381.1 [M+Na] , 739.1 [2M+Na] .
Synthesized from 21e (0,29 g, 1,1 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,16 g (yield 38%). H NMR (300 MHz, DMSO-d6): δ 13.22 (s,
1H), 8.45 (s, 1H), 8.17 (dd, J = 8.4, 1.5 Hz, 1H), 8.06 (d, J = 7.8 Hz, 1H), 7.99 (t, J = 4.1 Hz, 2H), 7.76
(d, J = 8.1 Hz, 1H), 7.65 (td, J = 8.1, 6.2 Hz, 1H), 7.39 (td, J = 8.5, 2.3 Hz, 1H), 2.84 (s, 3H), 2.75 (s,
PT
13
3H). C NMR (75 MHz, DMSO-d6): δ 164.7, 164.0, 161.5, 152.2, 148.7, 146.9, 132.8, 131.9 (d, J =
8.6 Hz), 130.8, 130.1, 125.1, 123.4, 122.5, 117.7, 117.5, 113.8 (d, J = 23.7 Hz), 20.9, 14.6. API-ES:
- + +
m/z 357 [M-H] , 359.1 [M+H] ,739 [2M+Na] .
RI
4.1.24. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(4-fluorophenyl)-1H-1,3-benzodiazole (29)
Synthesized from 21f (0,23 g, 0.89 mmol) following the procedure described for 26. Purified on silica
1
SC
gel (chloroform/methanol 0-5%), solid 80 mg (yield 25%). H NMR (300 MHz, DMSO-d6): δ 8.46 (dd,
J = 8.9, 5.2 Hz, 3H), 8.29 (dd, J = 8.6, 1.4 Hz, 1H), 7.94 (d, J = 0.9 Hz, 1H), 7.87 (d, J = 8.5 Hz, 1H),
-
7.52 (t, J = 8.8 Hz, 2H), 2.79 (s, 3H), 2.71 (s, 3H). API-ES: m/z 357 [M-H] .
U
Synthesized from 21b (0,27 g, 1.13 mmol) following the procedure described for 23. Purified on silica
AN
1
gel (chloroform/methanol 0-5%), solid 0,1 g (yield 26%). H NMR (300 MHz, DMSO-d6): δ 13.38 (s,
1H), 8.77 (s, 1H), 8.42 (s, 1H), 8.37 (d, J = 7.8 Hz, 1H), 8.23 – 8.09 (m, 1H), 8.03 (dd, J = 10.7, 4.7
Hz, 1H), 7.96 (s, 1H), 7.83 (d, J = 8.5 Hz, 1H), 7.67 (d, J = 8.4 Hz, 1H), 7.57 (dd, J = 8.6, 3.7 Hz, 1H),
13
2.81 (s, 3H), 2.72 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 164.0, 153.0, 149.5, 148.5, 146.9, 146.2,
M
138.3, 137.3, 135.8, 130.8, 130.1, 125.6, 124.8, 123.2, 122.2, 118.7, 113.2, 21.0, 14.7. API-ES: m/z
- + + +
340 [M-H] , 342 [M+H] , 364 [M+Na] , 705 [2M+Na] .
Synthesized from 21h (1,5 g, 5.32 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,98 g (yield 53%). H NMR (300 MHz, DMSO-d6): δ 13.64 (s,
TE
1H), 8.42 (s, 1H), 8.17 (d, J = 8.6 Hz, 1H), 8.13 (d, J = 3.2 Hz, 1H), 8.03 (d, J = 3.2 Hz, 1H), 7.96 (s,
13
1H), 7.77 (s, 1H), 2.81 (s, 3H), 2.77 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.2, 158.3, 148.1,
-
147.4, 146.3, 144.2, 130.2, 129.4, 125.1, 123.3, 122.3, 20.3, 14.1. API-ES: m/z 346 [M-H] , 370
+ +
[M+Na] , 717 [2M+Na] .
EP
4.1.27. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(2-methoxyphenyl)-1H-1,3-benzodiazole
(32)
C
Synthesized from 21g (0,33 g, 0.9 mmol) following the procedure described for 23. Purified on silica
1
gel (ethyl acetate/methanol 0-30%), solid 0,11 g (yield 28%). H NMR (300 MHz, DMSO-d6): δ 10.75
AC
(s, 1H), 8.66 – 8.56 (m, 1H), 8.51 (s, 1H), 8.29 (d, J = 8.3 Hz, 1H), 7.83 (s, 1H), 7.51 – 7.38 (m, 1H),
7.27 (s, 1H), 7.17 (t, J = 7.5 Hz, 1H), 7.07 (d, J = 8.3 Hz, 1H), 4.10 (s, 3H), 2.95 (s, 3H), 2.78 (s, 3H).
- + +
API-ES: m/z 369 [M-H] , 371 [M+H] , 393 [M+Na] .
4.1.28. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(1-methyl-1H-imidazol-2-yl)-1H-1,3-
benzodiazole (33)
Synthesized from 21i (0,30 g, 1,24 mmol) following the procedure described for 23. Purified on silica
1
gel (chloroform/methanol 0-2%), solid 0,16 g (yield 39%). H NMR (300 MHz, DMSO-d6): δ 8.63 (s,
1H), 8.31 (d, J = 8.5 Hz, 1H), 7.86 (s, 1H), 7.82 (s, 1H), 7.37 (s, 1H), 7.16 (d, J = 9.1 Hz, 2H), 4.29 (s,
13
3H), 2.97 (s, 3H), 2.83 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 149.1, 138.0, 130.8, 129.3, 128.6,
- +
124.9, 35.8, 20.3, 14.5. API-ES: m/z 343.1 [M-H] , 367.1 [M+Na] .
Synthesized from 21m (0,6 g, 2,07 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,44 g (yield 54%). H NMR (300 MHz, DMSO-d6): δ 9.82 (s,
PT
1H), 8.52 (s, 1H), 8.30 – 8.11 (m, 3H), 7.97 (d, J = 15.3 Hz, 4H), 2.84 (s, 3H), 2.75 (s, 3H). API-ES:
- + +
m/z 391.1 [M-H] , 415.1 [M+Na] , 807.1 [2M+Na] .
4.1.31. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-[2-(trifluoromethoxy)phenyl]-1H-1,3-
RI
benzodiazole (36)
Synthesized from 21n (0,39 g, 1,09 mmol) following the procedure described for 26. Purified on silica
1
SC
gel (chloroform/methanol 0-4%), solid 0,24 g (yield 52%). H NMR (300 MHz, DMSO-d6): δ 8.52 (s,
1H), 8.18 (d, J = 6.9 Hz, 2H), 7.95 (s, 1H), 7.77 (d, J = 13.9 Hz, 1H), 7.68 (dt, J = 22.1, 6.5 Hz, 3H),
13
2.82 (s, 3H), 2.72 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.3, 148.8, 147.9, 146.2, 145.6, 131.7
-
(d, J = 19.9 Hz), 130.1, 129.3, 128.1, 124.1, 122.1, 118.3, 20.1, 13.9. API-ES: m/z 423.1 [M-H] ,
+ + +
U
425.1 [M+H] , 447.1 [M+Na] , 871.1 [2M+Na] .
4.1.32. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-[2-(trifluoromethyl)phenyl]-1H-1,3-
AN
benzodiazole (37)
Synthesized from 21o (0,29 g, 0,95 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,22 g (yield 50%). H NMR (300 MHz, DMSO-d6): δ 13.06 (s,
M
1H), 8.48 (s, 1H), 8.20 (d, J = 8.6 Hz, 1H), 8.05 – 7.94 (m, 2H), 7.94 – 7.68 (m, 4H), 2.84 (s, 3H), 2.75
13
(s, 3H). C NMR (75 MHz, DMSO-d6): δ 164.1, 148.7, 147.0, 133.2, 132.9, 131.2, 130.9, 130.3 (d, J
- +
= 31.7 Hz), 129.9, 129.6, 128.8, 127.3, 126.2, 20.9, 14.7. API-ES: m/z 407.1 [M-H] , 409.1 [M+H] ,
+ +
431.1 [M+Na] , 839.1 [2M+Na] .
D
Synthesized from 21p (0,37 g, 1,41 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,18 g (yield 35%). H NMR (300 MHz, DMSO-d6): δ 13.39 (s,
1H), 8.56 (s, 1H), 8.26 (d, J = 8.7 Hz, 1H), 8.20 – 8.07 (m, 2H), 8.05 (d, J = 1.0 Hz, 1H), 7.97 (td, J =
7.7, 1.3 Hz, 1H), 7.92 – 7.81 (m, 1H), 7.77 (td, J = 7.7, 1.2 Hz, 1H), 2.87 (s, 3H), 2.79 (s, 3H). API-
EP
- -
ES: m/z 364.1 [M-H] , 400.1 [M+Cl] .
4.1.34. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(2-methylphenyl)-1H-1,3-benzodiazole
(39)
C
Synthesized from 21q (0,5 g, 1,98 mmol) following the procedure described for 26. Purified on silica
AC
1
gel (chloroform/methanol 0-6%), solid 0,44 g (yield 62%). H NMR (300 MHz, DMSO-d6): δ 12.87 (s,
1H), 8.46 (d, J = 38.6 Hz, 1H), 8.15 (d, J = 7.2 Hz, 1H), 7.96 (s, 1H), 7.76 (dd, J = 19.5, 17.8 Hz, 2H),
13
7.51 – 7.29 (m, 3H), 2.81 (s, 3H), 2.72 (s, 3H), 2.63 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.3,
153.5, 147.8, 146.1, 137.0, 136.1, 131.2, 130.0, 129.4 (dd, J = 17.3, 7.8 Hz), 125.9, 120.7, 20.9, 20.1,
- +
13.8. API-ES: m/z 353.1 [M-H] , 355.1 [M+H] .
Synthesized from 21r (1,56 g, 6,84 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,83 g (yield 37 %). H NMR (300 MHz, DMSO-d6): δ 13.16 (d,
J = 12.0 Hz, 1H), 8.41 (d, J = 35.9 Hz, 1H), 8.15 (ddd, J = 10.2, 8.5, 1.5 Hz, 1H), 8.01 (dd, J = 8.3, 4.1
Hz, 2H), 7.70 (dd, J = 36.7, 8.5 Hz, 1H), 7.28 (d, J = 3.4 Hz, 1H), 6.78 (dt, J = 5.1, 2.5 Hz, 1H), 2.83
13
(s, 3H), 2.74 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.4 (d, J = 12.8 Hz), 148.0, 146.2, 145.4,
ACCEPTED MANUSCRIPT
145.0 (d, J = 15.0 Hz), 134.5, 130.1, 129.4, 124.4, 124.0, 122.1, 121.3, 119.0, 117.4, 112.5, 111.7,
- - + +
111.2, 110.1, 20.2, 14.0. API-ES: m/z 329.1 [M-H] , 365.1 [M+Cl] , 331.1 [M+H] , 683.1 [2M+Na] .
Synthesized from 21s (0,4 g, 1,64 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,28 g (yield 49 %). H NMR (300 MHz, DMSO-d6): δ 13.17 (d,
J = 17.3 Hz, 1H), 8.39 (d, J = 33.9 Hz, 1H), 8.13 (t, J = 9.0 Hz, 1H), 7.97 (s, 1H), 7.89 (d, J = 3.1 Hz,
1H), 7.80 (d, J = 4.8 Hz, 1H), 7.69 (dd, J = 31.6, 8.3 Hz, 1H), 7.33 – 7.19 (m, 1H), 2.82 (s, 3H), 2.73
13
(s, 3H). C NMR (75 MHz, DMSO-d6): δ 148.7, 146.9, 133.9, 130.8, 130.1, 129.1, 127.9, 124.7,
- -
122.8, 121.9, 119.5, 117.9, 112.2, 110.5, 20.9, 14.7. API-ES: m/z 345.1 [M-H] , 381.1 [M+Cl] , 347.1
PT
+ +
[M+H] , 715.1 [2M+Na] .
4.1.37. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(1,3-oxazol-4-yl)-1H-1,3-benzodiazole
(42)
RI
Synthesized from 21t (0,59 g, 2,57 mmol) following the procedure described for 26. Purified on silica
1
gel (eluent: chloroform), solid 0,20 g (yield 23 %). H NMR (300 MHz, DMSO-d6): δ 13.22 (s, 1H), 8.93
SC
(s, 1H), 8.72 (dd, J = 5.4, 1.0 Hz, 1H), 8.45 (d, J = 21.2 Hz, 1H), 8.23 – 8.11 (m, 1H), 8.01 (s, 1H),
- -
7.72 (dd, J = 32.7, 8.6 Hz, 1H), 2.84 (s, 3H), 2.75 (s, 3H). API-ES: m/z 330.1 [M-H] , 366.1 [M+Cl] .
4.1.38. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(1,3-thiazol-4-yl)-1H-1,3-benzodiazole
(43)
U
Synthesized from 21j (0,50 g, 2,04 mmol) following the procedure described for 26. Purified on silica
AN
1
gel (chloroform/methanol 0-6%), solid 0,46 g (yield 65 %). H NMR (300 MHz, CDCl3): δ 8.88 (d, J =
2.0 Hz, 1H), 8.39 (m, 2H), 8.28 (s, 1H), 8.19 (dd, J = 8.5, 1.6 Hz, 1H), 7.76 (s, 2H), 2.85 (s, 3H), 2.72
13
(s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.4, 155.7, 148.5, 147.9, 146.6, 146.2, 130.1, 129.3,
+ + -
124.2, 121.6, 120.2, 20.2, 14.0. API-ES: m/z 348.1 [M+H] , 370.1 [M+Na] , 382.1 [M+Cl] .
M
4.1.39. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(1,3-thiazol-5-yl)-1H-1,3-benzodiazole
(44)
D
Synthesized from 21k (0,50 g, 2,04 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,44 g (yield 63 %). H NMR (300 MHz, DMSO-d6): δ 9.27 (s,
1H), 8.63 (s, 1H), 8.45 (s, 1H), 8.18 (dd, J = 8.3, 1.6 Hz, 1H), 8.03 (s, 1H), 7.75 (d, J = 8.4 Hz, 1H),
TE
- -
2.87 (s, 3H), 2.78 (s, 3H). API-ES: m/z 346.1 [M-H] , 382.1 [M+Cl] .
4.1.40. 2-(3-bromophenyl)-6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-1H-1,3-benzodiazole
(45)
EP
Synthesized from 21u (2,48 g, 6,26 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,91 g (yield 27 %). H NMR (300 MHz, DMSO-d6): δ 8.42 (d, J
= 15.6 Hz, 1H), 8.20 (s, 1H), 7.99 (s, 1H), 7.73 (s, 2H), 7.49 (s, 3H), 2.83 (s, 3H), 2.74 (s, 3H). API-
C
- - +
ES: m/z 417.1 [M-H] , 453.1 [M+Cl] , 873.1 [2M+Na] .
Synthesized from 21v (0,40 g, 1,67 mmol) following the procedure described for 26. Purified on silica
1
gel (ethyl acetate/methanol 0-30%), solid 0,18 g (yield 31 %). H NMR (300 MHz, DMSO-d6): δ 13.23
(s, 1H), 9.30 (d, J = 1.5 Hz, 1H), 8.64 (dd, J = 4.7, 1.4 Hz, 1H), 8.37 (dd, J = 47.5, 12.8 Hz, 2H), 8.09
(d, J = 8.1 Hz, 1H), 7.90 (s, 1H), 7.70 (d, J = 25.7 Hz, 1H), 7.55 (dd, J = 7.8, 4.8 Hz, 1H), 2.76 (s, 3H),
13
2.66 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 150.9, 148.1, 147.7, 146.3, 134.0, 130.2, 129.5, 125.9,
- -
124.1, 20.3, 14.1. API-ES: m/z 340.1 [M-H] , 370.1 [M+Cl] .
4.1.42. 2-(5-Chlorothiophen-2-yl)-6-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-1H-1,3-
benzodiazole (47)
Synthesized from 21w (0,40 g, 1,15 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,18 g (yield 42 %). H NMR (300 MHz, DMSO-d6): δ 8.28 (s,
1H), 8.05 (dd, J = 8.4, 1.4 Hz, 1H), 7.90 (s, 1H), 7.73 – 7.53 (m, 2H), 7.21 (d, J = 4.0 Hz, 1H), 2.75 (s,
ACCEPTED MANUSCRIPT
13
3H), 2.66 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.4, 148.1, 147.6, 146.3, 132.5, 131.1, 130.2,
- -
129.5, 128.4, 126.8, 124.5, 121.9, 20.3, 14.1. API-ES: m/z 379.1 [M-H] , 415.1 [M+Cl] .
Synthesized from 21y (0,90 g, 3,00 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,42 g (yield 40 %). H NMR (300 MHz, DMSO-d6): δ 13.56 (s,
1H), 9.52 (s, 1H), 8.82 (d, J = 9.0 Hz, 2H), 8.49 (d, J = 38.9 Hz, 1H), 8.18 (d, J = 8.8 Hz, 1H), 7.97 (s,
- -
1H), 7.93 – 7.64 (m, 1H), 2.83 (s, 3H), 2.75 (s, 3H). API-ES: m/z 341.1 [M-H] , 377.1 [M+Cl] , 707.1
+
[2M+Na] .
PT
4.1.44. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(3-fluoropyridin-2-yl)-1H-1,3-benzodiazole
(49)
Synthesized from 21x (0,80 g, 2,33 mmol) following the procedure described for 26. Purified on silica
RI
1
gel (chloroform/methanol 0-6%), solid 0,41 g (yield 49 %). H NMR (300 MHz, DMSO-d6): δ 13.38 (s,
1H), 8.65 (s, 1H), 8.52 (d, J = 35.4 Hz, 1H), 8.19 (dd, J = 16.4, 8.2 Hz, 1H), 7.99 (t, J = 9.7 Hz, 2H),
-
7.89 (d, J = 8.5 Hz, 1H), 7.71 (d, J = 8.9 Hz, 1H), 2.83 (s, 3H), 2.74 (s, 3H). API-ES: m/z 358.1 [M-H] ,
- + +
SC
394.1 [M+Cl] , 382.1 [M+Na] , 741.1 [2M+Na] .
4.1.45. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(3-methoxypyridin-2-yl)-1H-1,3-
benzodiazole (50)
U
Synthesized from 21z (0,31 g, 1,15 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 70 mg (yield 16 %). H NMR (300 MHz, DMSO-d6): δ 13.22 (s,
AN
br, 1H), 8.53 (s, 1H), 8.38 (d, J = 4.2 Hz, 1H), 8.17 (d, J = 8.5 Hz, 1H), 8.00 (s, 1H), 7.75 (d, J = 8.3
13
Hz, 2H), 7.57 (dd, J = 8.4, 4.4 Hz, 1H), 4.01 (s, 3H), 2.84 (s, 3H), 2.75 (s, 3H). C NMR (75 MHz,
DMSO-d6): δ 155.3, 151.4, 148.7, 147.1, 141.7, 137.5, 130.9, 130.1, 126.5, 121.5, 56.7, 21.0, 14.7.
+ + +
API-ES: m/z 372.1 [M+H] , 394.1 [M+Na] , 765.1 [2M+Na] .
M
4.1.46. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(4-methoxypyridin-2-yl)-1H-1,3-
benzodiazole (51)
D
Synthesized from 21ii (0,40 g, 1,49 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-3%), solid 0,11 g (yield 19 %). H NMR (300 MHz, DMSO-d6): δ 13.37 (s,
1H), 8.58 (d, J = 5.7 Hz, 1H), 8.50 (d, J = 31.9 Hz, 1H), 8.25 – 8.12 (m, 1H), 8.00 (s, 1H), 7.88 (d, J =
TE
2.3 Hz, 1H), 7.77 (dd, J = 48.4, 8.3 Hz, 1H), 7.14 (dd, J = 5.7, 2.6 Hz, 1H), 3.98 (s, 3H), 2.84 (s, 3H),
+ + +
2.75 (s, 3H). API-ES: m/z 372.1 [M+H] , 394.1 [M+Na] , 765.1 [2M+Na] .
4.1.47. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(4-methyl-1,3-thiazol-2-yl)-1H-1,3-
EP
benzodiazole (52)
Synthesized from 21iii (1,0 g, 2,78 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-6%), solid 0,66 g (yield 65 %). H NMR (300 MHz, DMSO-d6): δ 13.62 (s,
C
1H), 8.41 (d, J = 39.1 Hz, 1H), 8.17 (dd, J = 16.5, 8.6 Hz, 1H), 7.96 (s, 1H), 7.71 (dd, J = 49.9, 8.5 Hz,
- +
1H), 7.56 (s, 1H), 2.81 (s, 3H), 2.72 (s, 3H), 2.52 (s, 3H). API-ES: m/z 360.1 [M-H] , 745.1 [2M+Na] .
AC
4.1.48. 6-{5,8-Dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(5-methyl-1,3-thiazol-2-yl)-1H-1,3-
benzodiazole (53)
Synthesized from 21iv (0,50 g, 1,74 mmol) following the procedure described for 26. Purified on silica
1
gel (chloroform/methanol 0-5%), solid 0,29 g (yield 46 %). H NMR (300 MHz, DMSO-d6): δ 8.44 (d, J
= 36.9 Hz, 1H), 8.16 (d, J = 9.0 Hz, 1H), 7.99 (s, 1H), 7.82 (s, 1H), 7.67 (m, 1H), 2.84 (s, 3H), 2.75 (s,
13
3H), 2.58 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 163.2, 156.3, 148.1, 147.5, 145.0, 142.2, 137.3,
- +
130.2, 129.4, 121.6, 119.5, 110.7, 20.2, 14.0, 11.7. API-ES: m/z 360.1 [M-H] , 384.1 [M+Na] , 745.1
+
[2M+Na] .
To a solution of 3,4-dinitrobenzoic acid (54, 1,92 g, 8.88 mmol, 1,2 eq.) in dry DCM (50 ml) 0,5 ml of
dry DMF were added at RT and oxalyl chloride (1,15 mL, 13,3 mmol, 1,8 eq.) was slowly added
ACCEPTED MANUSCRIPT
dropwise within 5 minutes. The whole was stirred at RT for 2h and concentrated into dryness. The
obtained residue was redissolved in 50 mL of dry THF, 5,16 mL (37 mmol, 5 eq.) of TEA and 1 g
(7.40 mmol, 1 eq.) of 1-(2-aminophenyl)ethanone were added and the whole was stirred at RT for
18h, then refluxed for 2h. The reaction mixture was cooled to RT and partitioned between water (50
ml) and AcOEt (50 ml). Water phase was extracted with AcOEt (4 x 30 mL), combined extracts were
dried with Na2SO4 and concentrated. The crude product was recrystallized from AcOEt, washed with
Et2O and dried in vacuo. 1,80 g of 55 was obtained as a solid (yield 74%). Rf 0,5 (heptane/AcOEt
1
1:1). H NMR (500 MHz, CDCl3): δ 13.12 (s, 1H), 9.01 – 8.86 (m, 1H), 8.64 (d, J = 1.8 Hz, 1H), 8.41
(dd, J = 8.3, 1.9 Hz, 1H), 8.10 – 7.96 (m, 1H), 7.76 – 7.61 (m, 1H), 7.32 – 7.19 (m, 2H), 2.76 (s, 3H).
PT
4.1.50. 2-(3,4-Dinitrophenyl)-4-methylquinazoline (56)
In an pressure vessel (autoclave) 1,55 g (4,71 mmol) of 55 were placed and 70 mL of 1,2M
o
ammonia solution in MeOH was added. The whole was stirred and heated to 140 C for 5 h. After
RI
cooling to RT the mixture was diluted with CHCl3 (100 mL) to dissolve the formed precipitate,
suspended on silica gel and evaporated to dryness. The crude product was chromatographed (eluent
1
heptane-AcOEt 0-20%) to give 1,23 g of 56 as a solid (yield 93%). H NMR (500 MHz, CDCl3): δ 9.45
(d, J = 2.0 Hz, 1H), 8.69 (dd, J = 8.7, 1.4 Hz, 1H), 8.15 – 8.01 (m, 2H), 7.86 (ddd, J = 8.4, 6.9, 1.3 Hz,
SC
1H), 7.57 (ddd, J = 8.1, 7.0, 1.1 Hz, 1H), 6.94 (d, J = 8.7 Hz, 1H), 3.01 (s, 3H).
U
To a solution of 56 (0,2 g, 0,71 mmol) in a mixture of AcOEt (10 mL) and absolute EtOH (10 mL)
palladium on carbon (70 mg, 10%, dry) was added dropwise as suspension in EtOH (3 mL). The
reaction flask was was degassed twice and filled with hydrogen (1 atm). The whole was vigorously
AN
stirred at RT for 24 h. TLC analysis (CHCl3/MeOH 95:5) showed full conversion of 56 (Rf 0,95) to 57
(Rf 0,5). The reaction mixture was filtered through celite, and concentrated. 0,27 g of crude product
were obtained and used directly in the next step.
M
The mixture of 57 (0,27 g, 1,07 mmol, 1 eq.), benzaldehyde (0,15 g, 1,39 mmol, 1,3 eq.) and sodium
o
metabisulfite (0,26 g, 1,39 mmol, 1,3 eq.) in anhydrous DMF (20 mL) was heated to 80 C under argon
D
atmosphere for 20 h. The solvent was evaporated and obtained solid residue was dissolved in CHCl3,
filtered through celite and concentrated. The crude product was purified by column chromatography
TE
1
on silica gel (heptane-AcOEt 0-50%), affording 58 as a solid (85 mg, yield 24%). H NMR (300 MHz,
DMSO-d6): δ 13.19 (s, 1H), 8.83 (s, 1H), 8.52 (d, J = 8.6 Hz, 1H), 8.25 (dd, J = 14.9, 8.1 Hz, 3H), 8.08
– 7.93 (m, 2H), 7.80 – 7.64 (m, 2H), 7.56 (dt, J = 17.8, 6.4 Hz, 3H), 3.02 (s, 3H). API-ES: m/z 335.1
- + -
[M-H] , 337.1 [M+H] , 371.1 [M+Cl] .
EP
To a solution of 2-amino-4-methylpyrimidine (59, 1 eq.) in absolute EtOH (100 ml) the appropriate
C
phenacyl bromide (1 eq.) was added and the whole was heated at reflux for 5 h. After cooling to RT
water (100 mL) and CHCl3 (200 mL) were added and the organic phase was separated. Water phase
was neutralized to pH 7 with aqueous NaOH, adjusted to pH 9 with aq. NaHCO3 extracted with
AC
chloroform (3 x 40 mL) and dried with Na2SO4. The solvent was evaporated and the residue was
recrystallized from AcOEt/EtOH (2:1, v/v). The precipitate was filtered and washed with AcOEt,
affording pure product.
Synthesized from 59 (7,0 g, 62,2 mmol, 1 eq.) and 2-bromo-1-phenylethanone (12,4 g, 1 eq.). 9,22 g
1
of 60a were obtained as crystalline solid (yield 71%). H NMR (300 MHz, DMSO-d6): δ 8.80 (d, J =
6.8 Hz, 1H), 8.25 (s, 1H), 7.97 (d, J = 8.1 Hz, 2H), 7.45 (t, J = 7.6 Hz, 2H), 7.33 (t, J = 6.9 Hz, 1H),
13
6.93 (d, J = 6.8 Hz, 1H), 2.53 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 159.9, 148.1, 144.6, 134.3,
133.7, 128.8, 128.0, 125.6, 109.6, 107.0, 24.6.
PT
NMR (75 MHz, DMSO-d6): δ 161.2, 143.8, 139.1, 134.7, 120.4, 110.3, 107.8, 24.5. API-ES: m/z 239.1
+ +
[M+H] , 455.1 [2M+Na] .
RI
Synthesized from 59 (2,8 g, 24,9 mmol, 1 eq.) and 2-bromo-2’-methoxyacetophenone (6,0 g, 1 eq.)
1
4,64 g of 60d were obtained as a solid (yield 78%). H NMR (300 MHz, DMSO-d6): δ 8.87 (d, J = 6.3
13
SC
Hz, 1H), 8.27 (d, J = 14.6 Hz, 2H), 7.35 (s, 1H), 7.24 – 6.89 (m, 3H), 3.98 (s, 3H), 2.55 (s, 3H). C
NMR (75 MHz, DMSO-d6): δ 160.5, 156.5, 146.4, 139.2, 134.3, 129.0, 128.0, 120.5, 111.4, 110.6,
+ + +
109.6, 55.4, 24.5. API-ES: m/z 240.1 [M+H] , 262.1 [M+Na] , 501.1 [2M+Na] .
U
Synthesized from 59 (2,31 g, 20,1 mmol, 1 eq.) and 2-bromo-1-(4-fluorophenyl)ethanone (4,89 g, 1,1
AN
+ +
eq.). 4,01 g of 60e were obtained as a solid (yield 88%). API-ES: m/z 228.1 [M+H] , 250.1 [M+Na] ,
+
477.1 [2M+Na] .
Synthesized from 59 (1,83 g, 16,8 mmol, 1 eq.) and 2-chloro-4-fluorophenacyl bromide (4,85 g, 1,1
+ +
eq.). 3,96 g of 60f were obtained as a solid (yield 90%). API-ES: m/z 262.1 [M+H] , 284.1 [M+Na] ,
+
545.1 [2M+Na] .
D
Synthesized from 59 (1,8 g, 16 mmol, 1 eq.) and 2,4’-dibromoacetophenone (4,89 g, 1,1 eq.). 3,6 g
1
of 60g were obtained as a solid (yield 78%). H NMR (300 MHz, DMSO-d6): δ 8.83 (d, J = 6.9 Hz,
1H), 8.32 (s, 1H), 7.94 (d, J = 8.4 Hz, 2H), 7.66 (d, J = 8.4 Hz, 2H), 6.98 (d, J = 6.9 Hz, 1H), 2.55 (s,
+
3H). API-ES: m/z 599.1 [2M+Na] .
EP
δ 8.83 (s, 1H), 8.27 (s, 1H), 7.85 (d, J = 3.2 Hz, 1H), 7.07 (d, J = 9.0 Hz, 1H), 6.92 (t, J = 4.9 Hz, 2H),
+ +
3.92 (s, 3H), 3.79 (s, 3H), 2.53 (s, 3H). API-ES: m/z 292.1 [M+Na] , 561.2 [2M+Na] .
AC
Synthesized from 59 (1,64 g, 13,6 mmol, 1 eq.) and 2-bromophenacyl bromide (4,7 g, 1,1 eq.). 1,4 g
1
of 60j were obtained as a solid (yield 33%). H NMR (300 MHz, DMSO-d6): δ 8.90 (d, J = 6.9 Hz, 1H),
ACCEPTED MANUSCRIPT
8.48 (s, 1H), 8.13 (dd, J = 7.8, 1.7 Hz, 1H), 7.75 (d, J = 7.9 Hz, 1H), 7.52 (t, J = 7.2 Hz, 1H), 7.31 (dd,
+
J = 7.8, 1.6 Hz, 1H), 7.00 (d, J = 6.9 Hz, 1H), 2.56 (s, 3H). API-ES: m/z 311.0 [M+Na] .
PT
4.1.54.1. Dimethyl[(E)-2-{2-phenylimidazo[1,2-a]pyrimidin-7-yl)ethenyl]amine (61a)
Synthesized from 60a (50 g, 239 mmol, 1 eq.) and DMA-DMF (99,7 g, 836 mmol, 3,5 eq.). 56,6 g of
1
61a were obtained as a solid (yield 90%). H NMR (300 MHz, DMSO-d6): δ 8.46 (d, J = 7.1 Hz, 1H),
RI
7.98 (s, 1H), 7.91 (d, J = 7.4 Hz, 2H), 7.76 (d, J = 13.1 Hz, 1H), 7.42 (t, J = 7.6 Hz, 2H), 7.29 (t, J =
7.3 Hz, 1H), 6.78 (d, J = 7.2 Hz, 1H), 5.14 (d, J = 13.1 Hz, 1H), 2.96 (s, 6H). API-ES: m/z 265.1
+ + +
[M+H] , 287.1 [M+Na] , 551.0 [2M+Na] .
SC
4.1.54.2. Dimethyl[(E)-2-[2-(pyridin-2-yl)imidazo[1,2-a]pyrimidin-7-yl]ethenyl]amine (61b)
Synthesized from 60b (4,0 g, 19 mmol, 1 eq.) and DMA-DMF (6,8 g, 57 mmol, 3 eq.). 5,8 g of 61b
+ +
were obtained as yellow solid (yield 80%). API-ES: m/z 266.1 [M+H] , 553.0 [2M+Na] .
U
4.1.54.3. Dimethyl[(E)-2-[2-(1,3-thiazol-2-yl)imidazo[1,2-a]pyrimidin-7-yl]ethenyl]amine (61c)
AN
Synthesized from 60c (5,57 g, 25,8 mmol, 1 eq.) and DMA-DMF (9,21 g, 77,3 mmol, 3 eq.). 6,98 g of
+ +
61c were obtained as yellow solid (yield 70%). API-ES: m/z 294.1 [M+Na] , 565.0 [2M+Na] .
Synthesized from 60d (5,57 g, 25,8 mmol, 1 eq.) and DMA-DMF (9,21 g, 77,3 mmol, 3 eq.). 6,98 g of
+ +
61d were obtained as yellow solid (yield 70%). API-ES: m/z 294.1 [M+Na] , 565.0 [2M+Na] .
D
Synthesized from 60e (3,99 g, 17,6 mmol, 1 eq.) and DMA-DMF (7,48 g, 61,5 mmol, 3,5 eq.). 3,22 g
TE
+ +
of 61e were obtained as solid (yield 65%). API-ES: m/z 283.1 [M+H] , 587.2 [2M+Na] .
Synthesized from 60f (3,95 g, 15,1 mmol, 1 eq.) and DMA-DMF (6,42 g, 52,8 mmol, 3,5 eq.). 3,82 g
EP
+ +
of 61f were obtained as solid (yield 80%). API-ES: m/z 317.1 [M+H] , 656.1 [2M+Na] .
Synthesized from 60g (2,71 g, 9,42 mmol, 1 eq.) and DMA-DMF (3,37 g, 28,3 mmol, 3 eq.). 2,13 g of
+ +
61g were obtained as solid (yield 66%). API-ES: m/z 343.1 [M+H] , 365.1 [M+Na] .
AC
Synthesized from 60h (3,32 g, 12,3 mmol, 1 eq.) and DMA-DMF (5,25 g, 43,1 mmol, 3,5 eq.). 2,92 g
+ +
of 61h were obtained as solid (yield 72%). API-ES: m/z 325.1 [M+H] , 671.3 [2M+Na] .
Synthesized from 60i (3,87 g, 15,7 mmol, 1 eq.) and DMA-DMF (6,69 g, 55 mmol, 3,5 eq.). 3,66 g of
+
61i were obtained as solid (yield 78%). API-ES: m/z 619.1 [2M+Na] .
Synthesized from 60j (1,35 g, 4,69 mmol, 1 eq.) and DMA-DMF (1,99 g, 16,4 mmol, 3,5 eq.). 1,33 g of
+
61j were obtained as solid (yield 83%). API-ES: m/z 709.0 [2M+Na] .
ACCEPTED MANUSCRIPT
4.1.55. General procedure VIII – synthesis of carbaldehydes 62a-j
A solution of appropriate enamine 61a-j (14 g, 42,4 mmol, 1 eq.) in a mixture of THF (300 mL) and
o
water (300 mL) was cooled to 0 C and excess of sodium periodate (27,2 g, 127 mmol, 3 eq.) was
added. The whole was warmed to RT and further stirred for 18 h. After addition of CHCl3 (250 mL) the
mixture was filtered through celite and the phases were separated. Aqueous phase was extracted
with CHCl3, combined extracts were dried with MgSO4 and concentrated. The crude product was
purified by chromatography on silica gel (CHCl3-MeOH 0-5%).
PT
Synthesized from 61a (14 g, 42,4 mmol, 1 eq.) and NaIO4 (27,2 g, 127 mmol, 3 eq.). 6,4 g of 62a
1
were obtained as solid (yield 67%). H NMR (300 MHz, DMSO-d6): δ 9.92 (s, 1H), 9.14 (d, J = 6.9 Hz,
-
1H), 8.69 (s, 1H), 8.17 – 8.02 (m, 2H), 7.47 (tt, J = 14.6, 7.3 Hz, 4H). API-ES: m/z 258.1 [M+Cl] .
RI
4.1.55.2. 2-(Pyridin-2-yl)imidazo[1,2-a]pyrimidine-7-carbaldehyde (62b)
Synthesized from 61b (5,8 g, 17,5 mmol, 1 eq.) and NaIO4 (11,2 g, 52,5 mmol, 3 eq.). 1,15 g of 62b
1
were obtained as solid (yield 29%). H NMR (300 MHz, DMSO-d6): δ 9.94 (s, 1H), 9.16 (d, J = 6.9 Hz,
SC
1H), 8.70 (s, 1H), 8.67 (d, J = 4.4 Hz, 1H), 8.25 (d, J = 7.8 Hz, 1H), 7.95 (td, J = 7.7, 1.8 Hz, 1H), 7.51
+ +
(d, J = 6.9 Hz, 1H), 7.41 (dd, J = 7.5, 4.9 Hz, 1H). API-ES: m/z 247.1 [M+Na] , 471.1 [2M+Na] .
U
Synthesized from 61c (9,98 g, 29,4 mmol, 1 eq.) and NaIO4 (15,7 g, 73,6 mmol, 2,5 eq.). 2,7 g of 62c
1
were obtained as solid (yield 40%). H NMR (300 MHz, DMSO-d6): δ 9.92 (s, 1H), 9.17 (dd, J = 6.9,
AN
0.8 Hz, 1H), 8.70 (s, 1H), 8.02 (d, J = 3.2 Hz, 1H), 7.90 (d, J = 3.2 Hz, 1H), 7.55 (d, J = 6.9 Hz, 1H).
Synthesized from 61d (5,66 g, 19,2 mmol, 1 eq.) and NaIO4 (12,3 g, 57,7 mmol, 3 eq.). 2,06 g of 62d
1
were obtained as solid (yield 43%). H NMR (300 MHz, DMSO-d6): δ 9.92 (s, 1H), 9.15 (dd, J = 6.9,
0.8 Hz, 1H), 8.67 (s, 1H), 8.37 (dd, J = 7.7, 1.8 Hz, 1H), 7.47 (d, J = 6.9 Hz, 1H), 7.46 – 7.38 (m, 1H),
13
7.21 (d, J = 8.3 Hz, 1H), 7.14 (t, J = 7.5 Hz, 1H), 3.99 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 192.9,
D
+
136.4, 130.8, 129.3, 121.5, 114.1, 112.4, 104.9, 56.3. API-ES: m/z 276.1 [M+Na] .
TE
Synthesized from 61e (4,96 g, 17,6 mmol, 1 eq.) and NaIO4 (11,3 g, 52,7 mmol, 3 eq.). 1,07 g of 62e
1
were obtained as solid (yield 25%). H NMR (300 MHz, DMSO-d6): δ 9.92 (s, 1H), 9.14 (d, J = 6.9 Hz,
1H), 8.67 (s, 1H), 8.19 – 8.08 (m, 2H), 7.48 (d, J = 6.9 Hz, 1H), 7.35 (dd, J = 14.9, 5.9 Hz, 2H). API-
EP
-
ES: m/z 276.0 [M+Cl] .
Synthesized from 61f (4,78 g, 15,1 mmol, 1 eq.) and NaIO4 (9,68 g, 45,3 mmol, 3 eq.). 0,41 g of 62f
1
were obtained as solid (yield 10%). H NMR (300 MHz, CDCl3): δ 10.05 (d, J = 0.8 Hz, 1H), 8.62 (dd,
AC
J = 6.9, 0.8 Hz, 1H), 8.48 (d, J = 2.5 Hz, 1H), 7.54 (d, J = 6.9 Hz, 1H), 7.29 – 7.25 (m, 1H), 7.25 –
7.14 (m, 2H).
Synthesized from 61g (3,23 g, 9,41 mmol, 1 eq.) and NaIO4 (6,04 g, 28,2 mmol, 3 eq.). 0,72 g of 62g
1
were obtained as solid (yield 25%). H NMR (300 MHz, DMSO-d6): δ 9.92 (s, 1H), 9.14 (d, J = 6.9 Hz,
1H), 8.72 (s, 1H), 8.04 (d, J = 8.5 Hz, 2H), 7.73 (d, J = 8.4 Hz, 2H), 7.49 (d, J = 6.8 Hz, 1H). API-ES:
-
m/z 336.0, 338.0 [M+Cl] .
Synthesized from 61h (4,0 g, 12,3 mmol, 1 eq.) and NaIO4 (7,91 g, 37 mmol, 3 eq.). 1,28 g of 62h
1
were obtained as solid (yield 36%). H NMR (300 MHz, DMSO-d6): δ 9.90 (d, J = 0.8 Hz, 1H), 9.14
(dd, J = 6.9, 0.8 Hz, 1H), 8.65 (s, 1H), 7.90 (d, J = 3.2 Hz, 1H), 7.46 (d, J = 6.9 Hz, 1H), 7.12 (d, J =
ACCEPTED MANUSCRIPT
13
9.0 Hz, 1H), 6.98 (dd, J = 9.0, 3.2 Hz, 1H), 3.94 (s, 3H), 3.81 (s, 3H). C NMR (75 MHz, DMSO-d6): δ
192.4, 153.5, 151.5, 150.6, 144.9, 136.0, 121.7, 115.4, 113.7, 113.3 (d, J = 15.4 Hz), 104.4, 56.2,
55.6.
Synthesized from 61i (4,7 g, 15,73 mmol, 1 eq.) and NaIO4 (10,1 g, 47,2 mmol, 3 eq.). 1,46 g of 62i
1
were obtained as solid (yield 36%). H NMR (300 MHz, DMSO-d6): δ 9.91 (d, J = 0.8 Hz, 1H), 9.14
(dd, J = 6.9, 0.8 Hz, 1H), 8.76 (s, 1H), 8.12 (t, J = 1.6 Hz, 1H), 7.53 – 7.44 (m, 4H). API-ES: m/z 292.0
-
[M+Cl] .
PT
4.1.55.10. 2-(2-Bromophenyl)imidazo[1,2-a]pyrimidine-7-carbaldehyde (62j)
Synthesized from 61j (1,61 g, 4,69 mmol, 1 eq.) and NaIO4 (3,01 g, 14,1 mmol, 3 eq.). 0,52 g of 62j
1
were obtained as solid (yield 37%). H NMR (300 MHz, DMSO-d6): δ 9.93 (d, J = 0.7 Hz, 1H), 9.21
RI
(dd, J = 6.9, 0.7 Hz, 1H), 8.84 (s, 1H), 8.14 (dd, J = 7.9, 1.7 Hz, 1H), 7.80 (dd, J = 8.0, 1.0 Hz, 1H),
13
7.62 – 7.47 (m, 2H), 7.42 – 7.31 (m, 1H). C NMR (75 MHz, DMSO-d6): δ 192.3, 151.1, 146.7,
136.5, 134.0, 133.4, 132.0, 130.5, 128.2, 126.2, 120.9, 113.1, 104.8.
SC
4.1.56. General procedure IX - synthesis of 7-{5,7-dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}-2-
arylimidazo[1,2-a]pyrimidines (63-65)
To a solution of appropriate carbaldehyde (62a-c, 0,18 g, 0,8 mmol, 1 eq.) in dry DMF (10 mL) 1-
U
amino-4,6-dimethylpyrimidin-2(1H)-iminium diphenylphosphinate [23] (0,34 g, 0,96 mmol, 1,2 eq.)
o
was added and the whole was heated under argon atmosphere to 80 C for 3h. After full conversion of
AN
o
carbaldehyde (TLC control) the reaction mixture was further heated to 50 C and stirred under air
atmosphere for 2d. The solvent was evaporated, the residue was dissolved in CHCl3 and filtered
through a layer of silica gel. The filtrate was concentrated and obtained crude product was purified by
column chromatography (eluent CHCl3/MeOH 0-7%).
M
NMR (300 MHz, DMSO-d6): δ 9.12 (d, J = 7.0 Hz, 1H), 8.53 (s, 1H), 8.07 (d, J = 7.5 Hz, 2H), 7.88 (d,
J = 6.9 Hz, 1H), 7.62 – 7.33 (m, 3H), 7.25 (s, 1H), 2.84 (s, 3H), 2.64 (s, 3H).
TE
4.1.56.2. 2-(7-{5,7-dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}imidazo[1,2-a]pyrimidin-2-yl)pyridine
(64)
Synthesized from 62b (0,50 g, 2,01 mmol, 1 eq.). 0,29 g of 64 were obtained as a solid (yield 42%).
1
EP
H NMR (300 MHz, DMSO-d6): δ 9.15 (d, J = 7.0 Hz, 1H), 8.62 (m, 2H), 8.18 (d, J = 6.9 Hz, 1H), 7.94
+
(m, 2H), 7.39 (m, 1H), 7.27 (s, 1H), 2.84 (s, 3H), 2.64 (s, 3H). API-ES: m/z 343.1 [M+H] , 365.1
+ +
[M+Na] , 707.1 [2M+Na] .
C
4.1.56.3. 2-(7-{5,7-dimethyl-[1,2,4]triazolo[1,5-a]pyrimidin-2-yl}imidazo[1,2-a]pyrimidin-2-yl)-1,3-
thiazole (65)
AC
1
Synthesized from 62c (0,50 g, 2,17 mmol, 1 eq.). 7mg of 65 were obtained as a solid (yield 1%). H
NMR (300 MHz, DMSO-d6): δ 9.16 (d, J = 7.1 Hz, 1H), 8.59 (d, J = 3.2 Hz, 1H), 7.99 (m, 2H), 7.86 (s,
+ +
1H), 7.30 (d, J = 3.2 Hz, 1H), 2.84 (s, 3H), 2.65 (s, 3H). API-ES: m/z 371.1 [M+Na] , 719.1 [2M+Na] .
To a solution of appropriate carbaldehyde (62a-j, 0,4 g, 1,61 mmol) in 2-propanol (20 mL) 1-amino-2-
imino-3,6-dimethyl-2,3-dihydro-1-pyrazinium diphenylphosphinate [23] (0,91 g, 1,94 mmol, 1 eq.) was
added and the whole was refluxed for 1h. Solvent was evaporated under reduced pressure and the
solid residue was chromatographed on silica gel (eluent: DCM/MeOH 0-4%).
4.1.57.2. 7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(2-methoxyphenyl)imidazo[1,2-
a]pyrimidine (67)
Synthesized from 62d (0,50 g, 1,97 mmol, 1 eq.). 0,23 g of 67 were obtained as a solid (yield 27%).
1
H NMR (300 MHz, DMSO-d6): δ 9.12 (d, J = 6.9 Hz, 1H), 8.47 (s, 1H), 8.36 (d, J = 7.6 Hz, 1H), 8.06
PT
(s, 1H), 7.86 (d, J = 7.0 Hz, 1H), 7.39 (dd, J = 11.2, 4.3 Hz, 1H), 7.15 (dd, J = 17.3, 8.1 Hz, 2H), 4.01
13
(s, 3H), 2.85 (s, 3H), 2.77 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 156.8, 142.9, 135.4, 130.2,
+
129.5, 128.4, 120.7, 111.8 (d, J = 35.6 Hz), 107.1, 55.5, 20.2, 13.9. API-ES: m/z 372.1 [M+H] , 765.1
+
RI
[2M+Na] .
4.1.57.3. 2-(7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-a]pyrimidin-2-yl)-1,3-thiazole
(68)
SC
Synthesized from 62c (0,50 g, 2,17 mmol, 1 eq.). 0,26 g of 68 were obtained as a solid (yield 34%).
1
H NMR (300 MHz, DMSO-d6): δ 9.15 (d, J = 7.0 Hz, 1H), 8.56 (s, 1H), 8.09 (s, 1H), 8.01 – 7.92 (m,
+ +
2H), 7.84 (d, J = 2.8 Hz, 1H), 2.86 (s, 3H), 2.77 (s, 3H). API-ES: m/z 371.1 [M+Na] , 719.1 [2M+Na] .
U
4.1.57.4. 2-(7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-a]pyrimidin-2-yl)pyridine
(69)
AN
Synthesized from 62b (0,50 g, 2,01 mmol, 1 eq.). 0,15 g of 69 were obtained as a solid (yield 22%).
1
H NMR (300 MHz, DMSO-d6): δ 9.18 (d, J = 6.9 Hz, 1H), 8.66 (d, J = 4.7 Hz, 1H), 8.60 (s, 1H), 8.19
(d, J = 8.1 Hz, 1H), 8.10 (s, 1H), 7.96 (d, J = 6.9 Hz, 2H), 7.45 – 7.34 (m, 1H), 2.87 (s, 3H), 2.78 (s,
M
+ +
3H). API-ES: m/z 365.1 [M+Na] , 707.1 [2M+Na] .
4.1.57.5. 7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}-2-(4-fluorophenyl)imidazo[1,2-a]pyrimidine
(70)
D
1
Synthesized from 62e (1,05 g, 4,37 mmol, 1 eq.). 89 mg of 70 were obtained as a solid (yield 5%). H
NMR (300 MHz, DMSO-d6): δ 9.06 (d, J = 7.0 Hz, 1H), 8.45 (s, 1H), 8.04 (t, J = 7.0 Hz, 3H), 7.84 (d, J
TE
13
= 7.0 Hz, 1H), 7.31 (t, J = 8.8 Hz, 2H), 2.83 (s, 3H), 2.74 (s, 3H). C NMR (75 MHz, DMSO-d6): δ
163.9, 160.8, 149.2, 147.7 (d, J = 11.0 Hz), 146.1, 135.5, 130.5, 130.2, 129.7, 127.8 (d, J = 8.5 Hz),
+ +
115.9, 115.6, 108.3, 107.5, 84.2, 20.2, 13.9. API-ES: m/z 382.1 [M+Na] , 741.2 [2M+Na] , 340.1 [M-
-
H] .
EP
4.1.57.6. 2-(2-Chloro-4-fluorophenyl)-7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-
a]pyrimidine (71)
C
1
Synthesized from 62f (0,41 g, 1,48 mmol, 1 eq.). 71 mg of 71 were obtained as a solid (yield 12%). H
NMR (300 MHz, DMSO-d6): δ 9.19 (d, J = 7.0 Hz, 1H), 8.72 (s, 1H), 8.35 (dd, J = 8.9, 6.5 Hz, 1H),
AC
8.11 (s, 1H), 7.97 (d, J = 7.0 Hz, 1H), 7.61 (dd, J = 8.8, 2.6 Hz, 1H), 7.53 – 7.37 (m, 1H), 2.87 (s, 3H),
+ +
2.79 (s, 3H). API-ES: m/z 416.1 [M+Na] , 809.1 [2M+Na] .
4.1.57.7. 2-(4-Bromophenyl)-7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-
a]pyrimidine (72)
Synthesized from 62g (0,72 g, 2,38 mmol, 1 eq.). 0,29 g of 72 were obtained as a solid (yield 29%).
1
H NMR (300 MHz, DMSO-d6): δ 9.11 (d, J = 7.0 Hz, 1H), 8.55 (s, 1H), 8.09 (d, J = 1.0 Hz, 1H), 8.02
13
– 7.93 (m, 2H), 7.90 (d, J = 7.0 Hz, 1H), 7.72 – 7.65 (m, 2H), 2.86 (s, 3H), 2.77 (s, 3H). C NMR (75
MHz, DMSO-d6): δ 149.4, 146.4, 146.0, 135.8, 132.0, 130.6 (d, J = 19.8 Hz), 127.9, 109.1, 107.8,
+ +
79.3, 20.4, 14.1. API-ES: m/z 442.1, 444.1 [M+Na] , 863.1 [2M+Na] .
4.1.57.8. 2-(2,5-Dimethoxyphenyl)-7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-
a]pyrimidine (73)
ACCEPTED MANUSCRIPT
Synthesized from 62h (0,41 g, 1,45 mmol, 1 eq.). 0,19 g of 73 were obtained as a solid (yield 34%).
1
H NMR (300 MHz, DMSO-d6): δ 9.11 (d, J = 6.9 Hz, 1H), 8.46 (s, 1H), 8.05 (s, 1H), 7.93 (s, 1H), 7.85
(d, J = 6.8 Hz, 1H), 7.10 (d, J = 8.9 Hz, 1H), 6.95 (d, J = 5.9 Hz, 1H), 3.95 (s, 3H), 3.84 (s, 3H), 2.86
13
(s, 3H), 2.77 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 158.9, 158.4, 157.9, 152.9 (d, J = 16.3 Hz),
151.0, 149.5, 146.0, 143.3, 138.1, 133.4, 130.6, 130.3, 117.3, 116.9, 114.6, 112.9 (d, J = 18.8 Hz),
+ +
111.4 (d, J = 11.7 Hz), 109.2, 55.8, 55.4, 19.9, 13.6. API-ES: m/z 402.1 [M+H] , 424.1 [M+Na] , 625.2
+
[2M+Na] .
4.1.57.9. 2-(3-Chlorophenyl)-7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-
a]pyrimidine (74)
PT
1
Synthesized from 62i (0,51 g, 2,0 mmol, 1 eq.). 0,10 g of 74 were obtained as a solid (yield 14%). H
NMR (300 MHz, DMSO-d6): δ 9.07 (d, J = 6.8 Hz, 1H), 8.54 (s, 1H), 8.03 (d, J = 7.4 Hz, 2H), 7.95 (d,
J = 7.6 Hz, 1H), 7.84 (t, J = 6.6 Hz, 1H), 7.50 (t, J = 7.7 Hz, 1H), 7.41 (d, J = 7.6 Hz, 1H), 2.83 (s, 3H),
13
RI
2.75 (s, 3H). C NMR (75 MHz, DMSO-d6): δ 160.6, 149.1, 148.0, 147.4, 146.0, 145.2, 135.5, 135.2,
+
133.5, 130.8 – 130.0 (m), 128.0, 125.1, 124.1, 109.1, 107.5, 20.1, 13.8. API-ES: m/z 376.1 [M+H] ,
+ + +
398.1 [M+Na] , 751.1 [2M+H] , 773.1 [2M+Na] .
SC
4.1.57.10. 2-(2-Bromophenyl)-7-{5,8-dimethyl-[1,2,4]triazolo[1,5-a]pyrazin-2-yl}imidazo[1,2-
a]pyrimidine (75)
1
Synthesized from 62j (0,50 g, 1,67 mmol, 1 eq.). 0,12 g of 75 were obtained as a solid (yield 18%). H
U
NMR (300 MHz, DMSO-d6): δ 9.20 (d, J = 7.0 Hz, 1H), 8.72 (s, 1H), 8.17 (d, J = 6.4 Hz, 1H), 8.09 (s,
1H), 7.94 (d, J = 7.0 Hz, 1H), 7.79 (d, J = 8.0 Hz, 1H), 7.57 (t, J = 7.5 Hz, 1H), 7.35 (t, J = 6.9 Hz, 1H),
13
2.86 (s, 3H), 2.78 (s, 3H). C NMR (75 MHz DMSO-d6): δ 149.2, 135.8, 133.7, 133.4, 131.5, 130.3 (d,
AN
+
J = 18.1 Hz), 129.8, 127.9, 120.5, 111.6, 107.5, 20.1, 13.8. API-ES: m/z 863.0 [2M+Na] .
To the mixture of 77 [31] (2,98 g, 17,3 mmol, 1 eq.) and guanidine hydrochloride (2,0 g, 20,8 mmol,
o
1,2 eq.) propanenitrile (3 mL) was added and the whole was heated to 100 C for 24h under argon
atmosphere. The reaction mixture was diluted with mixture of CHCl3 (100 mL) and MeOH (5 mL),
filtered through celite and concentrated. The obtained residue was purified by chromatography on
D
1
silica gel (eluent CHCl3/MeOH, 0-1%). 0,79 g of 78 was obtained as a solid (yield 27 %). H NMR
(300 MHz, CDCl3): δ 8.49 (dd, J = 4.9, 3.3 Hz, 1H), 7.27 (dd, J = 5.0, 2.6 Hz, 1H), 4.45 (q, J = 7.1 Hz,
TE
A mixture of 78 (0,78 g, 4,67 mmol, 1 eq.) and 2-bromo-1-phenylethanone (1,39 g, 7,0 mmol, 1,5 eq.)
EP
in toluene (30 mL) was heated to reflux with Dean-Stark apparatus for 6h. The reaction mixture was
filtered through a layer of silica gel and concentrated. Obtained residue was chromatographed on
1
silica gel (eluent CHCl3/MeOH 0-2%). 0,47 g of 79 was obtained as a solid (yield 38%). H NMR (300
C
MHz, CDCl3): δ 8.48 (d, J = 4.9 Hz, 2H), 8.08 – 7.98 (m, 2H), 7.51 – 7.38 (m, 2H), 7.26 (d, J = 4.9 Hz,
+ +
2H), 4.47 (q, J = 7.2 Hz, 2H), 1.45 (t, J = 7.1 Hz, 3H). API-ES: m/z 268.1 [M+H] , 557.1 [2M+Na] .
AC
To a solution of 79 (0,47 g, 1,76 mmol, 1 eq.) in THF/MeOH (7/3 mL, v/v) 1,48 g (35,2 mmol, 20 eq.)
of lithium hydroxide monohydrate dissolved in water (17 mL) were added and the whole was stirred at
RT for 18h. The solvents were evaporated into dryness, the solid residue was dissolved in water (50
mL) and acidified with 6N HCl to pH = 3. Formed precipitate was filtered and dried in the air. 0,17 g of
1
80 were obtained as a solid (yield 42%). H NMR (300 MHz, DMSO-d6): δ 13.66 (s, br, 1H), 9.11 (d, J
-
= 6.9 Hz, 1H), 8.56 (s, 1H), 8.06 (d, J = 6.8 Hz, 1H) 7.60-7.42 (m, 5H). API-ES: m/z 238.1 [M-H] .
To a solution of 80 (0,16 g, 0,67 mmol, 1 eq.) in dry DCM/DMF (15/3 mL, v/v) DIPEA (0,43 g, 3,34
mmol, 5 eq.) and HATU (0,64 g, 1,67 mmol, 2,5 eq.) were added and the whole was stirred at RT for
10 min. 1-(2-aminophenyl)ethanone (0,18 g, 1,34 mmol, 2 eq.) was added and the stirring was
ACCEPTED MANUSCRIPT
continued for 24h. The solvents were evaporated and the crude product was purified by
chromatography on silica gel (eluent CHCl3/MeOH, 0-5%). 0,11 g of 81 were obtained as a solid (yield
1
48%). H NMR (300 MHz, CDCl3): δ 8.98 – 8.91 (m, 1H), 8.61 (d, J = 6.9 Hz, 1H), 8.11 (dd, J = 8.3,
1.4 Hz, 2H), 8.03 – 7.94 (m, 2H), 7.85 (d, J = 6.9 Hz, 1H), 7.69 – 7.59 (m, 1H), 7.54 – 7.44 (m, 2H),
+ +
7.45 – 7.36 (m, 1H), 7.26 – 7.17 (m, 1H), 2.75 (s, 3H). API-ES: m/z 379.1 [M+Na] , 735.1 [2M+Na] ,
-
355.1 [M-H] .
Carboxamide 81 (42 mg, 0,12 mmol, 1 eq.) was placed in a pressure tube and ammonia (1,2M
solution in MeOH, 10 mL) was added, the vessel was tightly closed and the whole was heated to
PT
o
100 C for 18h. The reaction mixture was concentrated and the product was purified by
chromatography on silica gel (eluent CHCl3/MeOH 0-2%). 29 mg of 82 were obtained as a solid (yield
1
73%). H NMR (300 MHz, CDCl3): δ 8.63 (d, J = 7.1 Hz, 1H), 8.29 (d, J = 7.0 Hz, 1H), 8.18 (t, J = 8.0
RI
Hz, 2H), 8.02 (d, J = 7.6 Hz, 2H), 7.95 (s, 1H), 7.71 (t, J = 7.6 Hz, 1H), 7.46 (t, J = 7.3 Hz, 2H), 7.42 –
+ + +
7.33 (m, 1H), 7.31 (s, 1H), 3.09 (s, 3H). API-ES: m/z 338.1 [M+H] , 360.1 [M+Na] , 697.1 [2M+Na] .
SC
4.2.1. Assay of phosphodiesterase 10 inhibition in vitro
U
(C02-39) were purchased from SignalChem. Inhibitory activity of the compounds towards PDE10A
was tested using PDE-Glo (Promega Corporation, Madison, USA) luminescent method on 96-well
AN
plates according to the manufacturer’s protocol.
Briefly, the screening was performed at a concentration of 10 µM and IC50 determination was
performed for dilution series of 8 compounds’ concentrations ranging from 8 nM up to 280 nM. Each
chemical compound was assayed in duplicate and each reaction plate comprised positive, negative
M
and PKA control wells. Negative control wells contained all reagents except test compounds and
positive control wells contained all reagents except test compounds and the PDE10A enzyme. PKA
control wells tested PKA activity. Test compounds were dissolved in 100% DMSO and resulted
D
solutions were diluted in 1x PDE-Glo Reaction Buffer. 5µl of obtained solutions were added into wells
of a 96-well plate. 2,5 ng of PDE10A, 17,5 ng of PDE9A or 4,4 ng of PDE1C and 10x
Ca2+/Calmodulin Solution were added per reaction well and mixed on orbital shaker and subsequent
TE
incubated 10 min on ice. Reaction was initiated by adding cAMP for PDE1C and PDE10A or cGMP
solution for PDE9A reaction to final a concentration of 1µM or 10 µM, respectively, and continued for
30 min, 60 min or 40 min (700 rpm, 30°C), for PDE1C, PDE9A or PDE10A, respectively. Reaction
was stopped by addition of PDE-Glo Termination Buffer with high concentration of
EP
phosphodiesterases’ inhibitors IBMX, BAY 73-6691 or MP10 to final concentrations of 800 µM, 250uM
and 200µM, respectively. After 10 min incubation at 25°C, 700 rpm, Detection Solution was added
and the plate was further incubated for 20 min (25°C, 700 rpm). In the next step Kinase-Glo Reagent
was added to each reaction well and the plate was incubated for another 10 min at 25°C, 700 rpm.
C
Luminescence intensity in wells was measured with the Victor Light (Perkin Elmer Inc.) luminometer.
Analyzed were only results from plates that achieved Z’factor (Zhang JH et al. 1999) greater than 0,5.
AC
Percent of PDE10A inhibition by tested compounds was determined based on luminescence intensity
measurements in wells containing test compounds and in control wells. Results for IC50 were fitted
using a four-parameter logistic fit in GraphPad Prism 5.03 software (GraphPad Software Inc.).
4.2.2. Selectivity study
The study of selectivity of compounds has been commissioned to the PerkinElmer Company. The
compounds were tested at 1.0e-7 M in the PDE assays including representative members of all PDE
families (PDE1C, PDE2A, PDE3B, PDE4B1, PDE5A1, PDE6C, PDE7A, PDE8A1, PDE9A2,
PDE10A1, PDE11A). The assay was performed using LabChip® technology and run on the EZ
Reader II platform. The test compounds and reference inhibitors were incubated in duplicate with an
appropriate assay targets and substrates. After incubation period, the reaction products and
remaining substrate were measured.
Acknowledgments:
PT
Financial support from The National Centre for Research and Development
(STRATEGMED2/268248/9/NCBR/2015) is gratefully acknowledged.
References:
RI
[1] K. Fujishige, J. Kotera, K. Omori, Striatum- and testis-specific phosphodiesterase PDE10A.
Isolation and characterization of a rat PDE10A, Eur. J. Biochem. 266, 3 (1999), 1118-1127.
SC
[2] M.R. DeLong, T. Wichmann, Circuits and circuit disorders of the basal ganglia, Arch Neurol. 64, 1
(2007), 20–24.
[3] J-P. Schuelke, N. J. Brandon, Current understanding of PDE10A in the modulation of basal
ganglia circuitry, Phosphodiesterases: CNS Functions and Diseases, 2017, pp. 15-43.
[4] P. R. A. Heckman, M.A. van Duinen, E. P. P. Bollen, A. Nishi, L. P. Wennogle, A. Blokland, J.
U
Prickaerts, Phosphodiesterase inhibition and regulation of dopaminergic frontal and striatal
functioning: clinical implications, International Journal of Neuropsychopharmacology, 19,10 (2016), 1-
AN
16.
[5] A.M. Graybiel, The basal ganglia, Curr Biol. 10,14 (2000), pR509–11.
M
Fusco, Phosphodiesterase 10 inhibition reduces striatal excitotoxicity in the quinolinic acid model of
Huntington’s disease, Neurobiology of Disease, 34,3 (2009), 450–456.
EP
[8] J. Kehler, A. Ritzén, D.R. Greve, The potential therapeutic use of phosphodiesterase 10 inhibitors,
Expert Opin. Ther. Pat., 17 (2007), 147-158.
[9] J. Kehler, J.P. Kilburn, Patented PDE10A inhibitors: novel compounds since 2007, Expert Opin.
C
[11] A. Ritzen, J. Kehler, M. Langgard, J. Nielsen, J.P. Kilburn, M.M. Farah, Novel phenylimidazole
derivatives as PDE10A enzyme inhibitors, WO2009/152825A1, 91 pp.
[12] A. Puschl, J. Nielsen, J. Kehler, J.P. Kilburn, M.Marigo, M. Langgard, Phenylimidazole derivatives
comprising an ethynylene linker as PDE10A enzyme inhibitors, WO2011/072695, 48 pp.
[13] A. Puschl, J. Nielsen, J. Kehler, J.P. Kilburn, M.Marigo, M. Langgard, 2-Arylimidazole derivatives
as PDE10A enzyme inhibitors, WO2011/072696, 62 pp.
[14] A. Puschl, J. Nielsen, J. Kehler, J.P. Kilburn, M.Marigo, M. Langgard, Heteroaromatic aryl triazole
derivatives as PDE10A enzyme inhibitors, WO2011/072697, 68 pp.
[15] T.A. Chappie, C.J. Helal, X. Hou, Current landscape of phosphodiesterase 10A (PDE10A)
inhibition, J. Med. Chem. 2012, 55, 7299-7331.
ACCEPTED MANUSCRIPT
[16] J. Kehler, 4-Phenylimidazoles: A novel class of phosphodiesterase 10A (PDE10A) inhibitors as a
nd
potential new generation of antipsychotics, EFMC-ISMC 2012, 22 International Symposium on
Medicinal Chemistry, Berlin, Germany, September 2-6 2012.
[18] W. Schmitz, M.V. Debenedetto, R.S. Kimura, Inhibitors of PDE10, WO2013/003298A2, 59 pp.
[19] S.F. Nelsen, P.M. Gannett, D. J. Steffek, J. Org. Chem, 45 (1980) , 3857-3860
[20] J. Mendiola, J.A. Rincon, C. Mateos, J. F. Soriano, O. de Frutos, J.K. Niemeier, E.M. Davis, Org.
PT
Proc. Res. Dev., 13 (2009), 263-267
[21] A.Flohr, L. Gobbi, K. Groebke-Zbinden, M. Koerner, J-U. Peters, Triazolopyridine compounds,
US2012/142665A1, pp. 19-20
RI
[22] A.Flohr, L. Gobbi, K. Groebke-Zbinden, M. Koerner, J-U. Peters, Triazolopyridine compounds,
US2012/142665A1, pp. 79-80.
SC
[23] R.Moszczyński-Pętkowski, Ł.Bojarski, M. Wieczorek, J. Majer, S. Janowska, M. Matłoka, M.
Borkowska, F. Stefaniak, M. Lamparska-Przybysz, K. Dubiel, Fused triazole derivatives as
phosphodiesterase 10A inhibitors, WO2015/177688A1, pp.19-20.
[24] K.L. Stevens, D.K. Jung, M.J. Alberti, J.G. Badiang, G.E. Peckham, J.M. Veal, M. Cheung, P.A.
U
Harris, S.D. Chamberlain, D. Stanley, M. R. Peel, Organic Letters, 7 (2005), 21, 4753-4756.
AN
[25] E.A. Conway, G.M.P. Giblin, M. Gibson, A. Hall, T.G.C. Hayhow, M.P. Healy, D.N. Hurst, I.R.
Kilford, S.C. McKeown, A. Naylor, H.S. Price, D.A. Rawlings, Pyrazole compounds as prostaglandin
receptors ligands, WO2006/114313A1, pp 178-179.
[26] N.P. Kumar, P. Sharma, S.S.Kumari, U. Brahma, S. Nekkanti, N. Shankaraiah, A. Kamal, Eur. J.
M
[28] A. Kamal, P.K. Pogula, M.N.A. Khan, B.N.Seshadri, K. Sreekanth, Medicinal Chemistry, 9 (2013),
5, 651-659.
TE
[29] L.S. Lin, T.J. Lanza, L.A. Castonguay, T. Kamenecka, E. McCauley, G. Van Riper, L.A. Egger,
R.A. Mumford, X. Tong, M. MacCross, J.A. Schmidt, W.K. Hagmann, Bioorganic and Medicinal
Chemistry Letters, 14 (2004), 2331-2334.
EP
[30] Y-S. Kwak, G.M. Coppola, Oxadiazole- and oxazole-substituted benzimidazole- and indole-
derivatives as DGAT1 inhibitors, WO2009/040410A1, pp. 141.
[31] M. Lee, Compositions and methods of the use thereof achiral analogues of CC-1065 and the
C
[32] D. Zhao, T. Wang, Q. Shen, J-X. Li, Chemical Communications, 50 (2014), 33, 4302-4304.
[33] P. Sanfilippo, M. Urbanski, J.B. Press, B. Dubinsky, J.B. Moore Jr., J. Med. Chem., 31 (1988), 11,
2221-2227.
[34] T.D. Crawford, V. Tsui, E.M. Flynn, ; S. Wang, A.M Taylor, A. Côté, J.E. Audia,
M.H. Beresini, D.J. Burdick, R. Cummings, L.A. Dakin, M. Duplessis, A.C. Good, M.C. Hewitt, H-R.
Huang, H. Jayaram,J.R. Kiefer, Y. Jiang, J. Murray, C.G. Nasveschuk, E. Pardo, F. Poy, A.F.
Romero, Y. Tang, J. Wang, Z. Xu, L.E. Zawadzke, X. Zhu, B.K. Albrecht, S.R. Magnuson, S. Bellon,
A.G. Cochran, J. Med. Chem., 59 (2016), 11, 5391-5402.
[35] K. Hasumi, S. Sato, T. Saito, J-Y. Kato, K. Shirota, J. Sato, H. Suzuki, S. Ohta, Bioorganic and
Medicinal Chemistry, 22 (2014), 15, 4162-4176.
[36] J. Hodacova, M. Budesinsky, Organic Letters, 9 (2007), 26, 5641-5643.
ACCEPTED MANUSCRIPT
[37] X. Chen, J. Gao, D. Jiang, Chemistry Letters, 44 (2015), 9, 1257-1259.
[38] L-F. Tietze, H. Meier, E. Voss, Synthesis, 4 (1988), 274-277.
[39] R. S Vartanyan, Zh. V. Kazaryan, S.A. Vartanyan, Chemistry of Heterocyclic Compounds (New
York, NY, United States); 18 (1982), 11, 1212 – 1213.
[40] O. Trott, A.J. Olson, AutoDock Vina: improving the speed and accuracy of docking with a new
scoring function, efficient optimization and multithreading, Journal of Computational Chemistry, 31
(2010), 455-461.
[41] R.J. Riley et al., Drug Metab Dispos 33(2005); 1304-1311.
[42] D.C. Ackley et al., Optimization in Drug Discovery. In vitro methods, Z. Yan et al. Eds. (2004),
PT
151-162.
RI
[44] F. Mjambili, M. Njoroge, K. Naran, C. De Kock, P.J. Smith, V. Mizrahi, D. Warner, K. Chibale,
Bioorganic and Medicinal Chemistry Letters, 24 (2014), 2, 560 – 564.
SC
[45] A. Dondoni, A. Marra, P. Merino, J. Am. Chem. Soc., 116 (1994), 8, 3324-3336.
U
AN
M
D
TE
C EP
AC
ACCEPTED MANUSCRIPT
- New classes of PDE10 inhibitors were designed based on
Example 1a by BMS
- Four different heterocyclic cores were explored
- Two obtained lead classes of compounds are selective and
metabolically stable
PT
- Compound 66 proved to be equally potent and 10-fold more
stable than Example 1a
RI
U SC
AN
M
D
TE
C EP
AC